From b8824c9a54bb380367541718b50f03cb08524c8d Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 15 Jun 2015 10:35:06 -0700 Subject: ARM: ep93xx: remove memory configuration options The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration options obsolete. This allows support for all the ep93xx variations to be built into a single kernel. Signed-off-by: H Hartley Sweeten Signed-off-by: Linus Walleij --- arch/arm/mach-ep93xx/Kconfig | 54 -------------------------------------- arch/arm/mach-ep93xx/Makefile.boot | 15 +---------- 2 files changed, 1 insertion(+), 68 deletions(-) (limited to 'arch/arm/mach-ep93xx') diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index bec570ae6494..61a75ca3684e 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -15,45 +15,8 @@ config CRUNCH comment "EP93xx Platforms" -choice - prompt "EP93xx first SDRAM bank selection" - default EP93XX_SDCE3_SYNC_PHYS_OFFSET - -config EP93XX_SDCE3_SYNC_PHYS_OFFSET - bool "0x00000000 - SDCE3/SyncBoot" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0x00000000. - -config EP93XX_SDCE0_PHYS_OFFSET - bool "0xc0000000 - SDCEO" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xc0000000. - -config EP93XX_SDCE1_PHYS_OFFSET - bool "0xd0000000 - SDCE1" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xd0000000. - -config EP93XX_SDCE2_PHYS_OFFSET - bool "0xe0000000 - SDCE2" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xe0000000. - -config EP93XX_SDCE3_ASYNC_PHYS_OFFSET - bool "0xf0000000 - SDCE3/AsyncBoot" - help - Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xf0000000. - -endchoice - config MACH_ADSSPHERE bool "Support ADS Sphere" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. @@ -63,7 +26,6 @@ config MACH_EDB93XX config MACH_EDB9301 bool "Support Cirrus Logic EDB9301" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -71,7 +33,6 @@ config MACH_EDB9301 config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -79,7 +40,6 @@ config MACH_EDB9302 config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -87,7 +47,6 @@ config MACH_EDB9302A config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -95,7 +54,6 @@ config MACH_EDB9307 config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -103,7 +61,6 @@ config MACH_EDB9307A config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -111,7 +68,6 @@ config MACH_EDB9312 config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus @@ -119,14 +75,12 @@ config MACH_EDB9315 config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" - depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation @@ -137,7 +91,6 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -145,7 +98,6 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" - depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -153,7 +105,6 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -161,7 +112,6 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" - depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the @@ -169,28 +119,24 @@ config MACH_MICRO9S config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" - depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index d3113a71cb40..ed82ed7c949f 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1,14 +1 @@ - zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000 -params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 - - zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000 -params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000 -params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000 -params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 - - zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000 -params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 +# Empty file waiting for deletion once Makefile.boot isn't needed any more. -- cgit v1.2.3