From 9f37e90efaf0772b8f98bc347b9db77a3f0c27eb Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 3 Mar 2015 15:28:53 +0200 Subject: clk: ti: dflt: move support for default gate clock to clock driver With the legacy support gone, OMAP2+ default gate clock can be moved under clock driver. Create a new file for the purpose, and clean-up the header exports a bit as some clock APIs are no longer needed outside clock driver itself. Signed-off-by: Tero Kristo --- arch/arm/mach-omap2/clock.c | 273 -------------------------------------------- 1 file changed, 273 deletions(-) (limited to 'arch/arm/mach-omap2/clock.c') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 6c17adf40e6f..38a336b4c42b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -40,12 +40,6 @@ #include "cm-regbits-34xx.h" #include "common.h" -/* - * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait - * for a module to indicate that it is no longer in idle - */ -#define MAX_MODULE_ENABLE_WAIT 100000 - u16 cpu_mask; /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ @@ -176,77 +170,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) /* Private functions */ - -/** - * _wait_idlest_generic - wait for a module to leave the idle state - * @clk: module clock to wait for (needed for register offsets) - * @reg: virtual address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Wait for a module to leave idle, where its idle-status register is - * not inside the CM module. Returns 1 if the module left idle - * promptly, or 0 if the module did not leave idle before the timeout - * elapsed. XXX Deprecated - should be moved into drivers for the - * individual IP block that the IDLEST register exists in. - */ -static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, - u32 mask, u8 idlest, const char *name) -{ - int i = 0, ena = 0; - - ena = (idlest) ? 0 : mask; - - omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("omap clock: module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -/** - * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE - * @clk: struct clk * belonging to the module - * - * If the necessary clocks for the OMAP hardware IP block that - * corresponds to clock @clk are enabled, then wait for the module to - * indicate readiness (i.e., to leave IDLE). This code does not - * belong in the clock code and will be moved in the medium term to - * module-dependent code. No return value. - */ -static void _omap2_module_wait_ready(struct clk_hw_omap *clk) -{ - void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; - s16 prcm_mod; - int r; - - /* Not all modules have multiple clocks that their IDLEST depends on */ - if (clk->ops->find_companion) { - clk->ops->find_companion(clk, &companion_reg, &other_bit); - if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit))) - return; - } - - clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); - if (r) { - /* IDLEST register not in the CM module */ - _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), - idlest_val, __clk_get_name(clk->hw.clk)); - } else { - omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id, - idlest_bit); - }; -} - /* Public functions */ /** @@ -279,174 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -/** - * omap2_clk_dflt_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Note: We don't need special code here for INVERT_ENABLE for the - * time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL - * - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's - * just a matter of XORing the bits. - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as MAILBOXES) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, u8 *other_bit) -{ - u32 r; - - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - - *other_reg = (__force void __iomem *)r; - *other_bit = clk->enable_bit; -} - -/** - * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk - * @clk: struct clk * to find IDLEST info for - * @idlest_reg: void __iomem ** to return the CM_IDLEST va in - * @idlest_bit: u8 * to return the CM_IDLEST bit shift in - * @idlest_val: u8 * to return the idle status indicator - * - * Return the CM_IDLEST register address and bit shift corresponding - * to the module that "owns" this clock. This default code assumes - * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that - * the IDLEST register address ID corresponds to the CM_*CLKEN - * register address ID (e.g., that CM_FCLKEN2 corresponds to - * CM_IDLEST2). This is not true for all modules. No return value. - */ -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = clk->enable_bit; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - * AM35xx uses both, depending on the module. - */ - *idlest_val = ti_clk_get_features()->cm_idlest_val; -} - -/** - * omap2_dflt_clk_enable - enable a clock in the hardware - * @hw: struct clk_hw * of the clock to enable - * - * Enable the clock @hw in the hardware. We first call into the OMAP - * clockdomain code to "enable" the corresponding clockdomain if this - * is the first enabled user of the clockdomain. Then program the - * hardware to enable the clock. Then wait for the IP block that uses - * this clock to leave idle (if applicable). Returns the error value - * from clkdm_clk_enable() if it terminated with an error, or -EINVAL - * if @hw has a null clock enable_reg, or zero upon success. - */ -int omap2_dflt_clk_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - int ret = 0; - bool clkdm_control; - - if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) - clkdm_control = false; - else - clkdm_control = true; - - clk = to_clk_hw_omap(hw); - - if (clkdm_control && clk->clkdm) { - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - if (ret) { - WARN(1, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, ret); - return ret; - } - } - - if (unlikely(clk->enable_reg == NULL)) { - pr_err("%s: %s missing enable_reg\n", __func__, - __clk_get_name(hw->clk)); - ret = -EINVAL; - goto err; - } - - /* FIXME should not have INVERT_ENABLE bit here */ - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v &= ~(1 << clk->enable_bit); - else - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */ - - if (clk->ops && clk->ops->find_idlest) - _omap2_module_wait_ready(clk); - - return 0; - -err: - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); - return ret; -} - -/** - * omap2_dflt_clk_disable - disable a clock in the hardware - * @hw: struct clk_hw * of the clock to disable - * - * Disable the clock @hw in the hardware, and call into the OMAP - * clockdomain code to "disable" the corresponding clockdomain if all - * clocks/hwmods in that clockdomain are now disabled. No return - * value. - */ -void omap2_dflt_clk_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - - clk = to_clk_hw_omap(hw); - if (!clk->enable_reg) { - /* - * 'independent' here refers to a clock which is not - * controlled by its parent. - */ - pr_err("%s: independent clock %s has no enable_reg\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v |= (1 << clk->enable_bit); - else - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - /* No OCP barrier needed here since it is a disable operation */ - - if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) && - clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - /** * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw * @hw: struct clk_hw * of the clock being enabled @@ -523,29 +278,6 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw) clkdm_clk_disable(clk->clkdm, hw->clk); } -/** - * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? - * @hw: struct clk_hw * to check - * - * Return 1 if the clock represented by @hw is enabled in the - * hardware, or 0 otherwise. Intended for use in the struct - * clk_ops.is_enabled function pointer. - */ -int omap2_dflt_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - - v = omap2_clk_readl(clk, clk->enable_reg); - - if (clk->flags & INVERT_ENABLE) - v ^= BIT(clk->enable_bit); - - v &= BIT(clk->enable_bit); - - return v ? 1 : 0; -} - static int __initdata mpurate; /* @@ -566,11 +298,6 @@ static int __init omap_clk_setup(char *str) } __setup("mpurate=", omap_clk_setup); -const struct clk_hw_omap_ops clkhwops_wait = { - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - /** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator -- cgit v1.2.3