From 9ded96f24c3a5fcbef954e88c443385a1af37eb9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Jan 2006 01:02:07 -0800 Subject: [PATCH] IRQ type flags Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-pxa/poodle.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-pxa/poodle.c') diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index eef3de26ad37..663c95005985 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -146,15 +146,14 @@ static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)( poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); - err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT, - "MMC card detect", data); + err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "MMC card detect", data); if (err) { printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); return -1; } - set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); - return 0; } -- cgit v1.2.3