From ead841c2ed986f7cc6a4830e816b0f633f95cf7f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 18 Aug 2011 20:16:56 +0900 Subject: ARM: S3C24XX: Remove hw_addr from s3c24xx dma channel declarations According to commit c4806174c516d26bf4a72db1789cfc96e4950d07 (ARM: S3C2412: DMA: Remove I2S FIFO address) the S3C DMA API does not make use of hw_addr.to/from declared for some of the channels in mach-s3c24XX/dma.c Grepping through the kernel also did non reveal any new users of these properties since the mentioned commit. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/dma.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 0d8e043804c2..dbe43df8cfec 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_USB_EP1] = { .name = "usb-ep1", -- cgit v1.2.3 From bbcdad52a4733435c239cb4e829f35d9abc2e06a Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 26 Aug 2011 10:59:50 +0900 Subject: ARM: S3C24XX: remove unused gpio codes Cc: Ben Dooks [kgene.kim@samsung.com: fix build error] Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/Kconfig | 6 ---- arch/arm/mach-s3c2410/Makefile | 1 - arch/arm/mach-s3c2410/gpio.c | 72 ------------------------------------------ 3 files changed, 79 deletions(-) delete mode 100644 arch/arm/mach-s3c2410/gpio.c (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55795dc..3700cf32af0f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2410 select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +27,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 81695353d8f4..782fd81144e9 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c deleted file mode 100644 index 9664e011dae2..000000000000 --- a/arch/arm/mach-s3c2410/gpio.c +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) - return -EINVAL; - - config &= 0xff; - - pin -= S3C2410_GPG(8); - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); -- cgit v1.2.3 From ae79ac5c0ccb8789df661b8aa4b16bac4243f43d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 30 Aug 2011 16:49:36 +0900 Subject: ARM: SAMSUNG: Move map header file into plat-samsung This is required to work consolidation Samsung platform. Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/include/mach/map.h | 52 ++++++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 425552d84b60..4cf495f813a7 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -14,9 +14,53 @@ #define __ASM_ARCH_MAP_H #include -#include -#define S3C2410_ADDR(x) S3C_ADDR(x) +/* + * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x4000) + +#include + +/* + * interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + +/* Timers */ +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_UART SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_GPIO SZ_1M /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) @@ -75,10 +119,8 @@ /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) #define S3C2412_PA_EBI (0x48800000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) /* physical addresses of all the chip-select areas */ @@ -100,12 +142,10 @@ #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG #define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI -- cgit v1.2.3