From 760ee1c4aafac8fcaf3be5ff2b19c5485c5886e1 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:02 +0300 Subject: dmaengine: add ep93xx DMA support The ep93xx DMA controller has 10 independent memory to peripheral (M2P) channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can also be used by SPI and IDE to perform DMA transfers to/from their memory mapped FIFOs. This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and DMA_MEMCPY (M2M only) capabilities. Signed-off-by: Mika Westerberg Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Acked-by: Vinod Koul Signed-off-by: Grant Likely --- arch/arm/mach-ep93xx/include/mach/dma.h | 87 +++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b25da9..6e7049a796a4 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -15,6 +15,8 @@ #include #include +#include +#include /** * struct ep93xx_dma_buffer - Information about a buffer to be transferred @@ -146,4 +148,89 @@ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, */ void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} + #endif /* __ASM_ARCH_DMA_H */ -- cgit v1.2.3 From e791e3455f1b7e92f0b66f460ade9c7a2299ac7e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:03 +0300 Subject: ep93xx: add dmaengine platform code Add platform support code for the new EP93xx dmaengine driver. Signed-off-by: Mika Westerberg Signed-off-by: Ryan Mallon Acked-by: H Hartley Sweeten Acked-by: Vinod Koul Signed-off-by: Grant Likely --- arch/arm/mach-ep93xx/Makefile | 2 + arch/arm/mach-ep93xx/dma.c | 108 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 arch/arm/mach-ep93xx/dma.c (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c863d18..4920f7ae8330 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -6,6 +6,8 @@ obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c new file mode 100644 index 000000000000..5a2570881255 --- /dev/null +++ b/arch/arm/mach-ep93xx/dma.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ep93xx/dma.c + * + * Platform support code for the EP93xx dmaengine driver. + * + * Copyright (C) 2011 Mika Westerberg + * + * This work is based on the original dma-m2p implementation with + * following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DMA_CHANNEL(_name, _base, _irq) \ + { .name = (_name), .base = (_base), .irq = (_irq) } + +/* + * DMA M2P channels. + * + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { + DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), + DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), + DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), + DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), + DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), + DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), + DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), + DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), + DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), + DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { + .channels = ep93xx_dma_m2p_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), +}; + +static struct platform_device ep93xx_dma_m2p_device = { + .name = "ep93xx-dma-m2p", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2p_data, + }, +}; + +/* + * DMA M2M channels. + * + * There are 2 M2M channels which support memcpy/memset and in addition simple + * hardware requests from/to SSP and IDE. We do not implement an external + * hardware requests. + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { + DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), + DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { + .channels = ep93xx_dma_m2m_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), +}; + +static struct platform_device ep93xx_dma_m2m_device = { + .name = "ep93xx-dma-m2m", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2m_data, + }, +}; + +static int __init ep93xx_dma_init(void) +{ + platform_device_register(&ep93xx_dma_m2p_device); + platform_device_register(&ep93xx_dma_m2m_device); + return 0; +} +arch_initcall(ep93xx_dma_init); -- cgit v1.2.3 From 71cebd700257a4f644066631bf02187d8f67817e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:05 +0300 Subject: ep93xx: remove the old M2P DMA code Since we have converted all existing users of the old DMA API to use the DMA engine API the old code can be dropped. Signed-off-by: Mika Westerberg Acked-by: Ryan Mallon Acked-by: H Hartley Sweeten Acked-by: Vinod Koul Signed-off-by: Grant Likely --- arch/arm/mach-ep93xx/Makefile | 2 +- arch/arm/mach-ep93xx/dma-m2p.c | 411 -------------------------------- arch/arm/mach-ep93xx/include/mach/dma.h | 143 ----------- 3 files changed, 1 insertion(+), 555 deletions(-) delete mode 100644 arch/arm/mach-ep93xx/dma-m2p.c (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 4920f7ae8330..21e721ab7378 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d354b1f8..000000000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include - -#include -#include - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 6e7049a796a4..46d4d876e6fb 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,153 +1,10 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include #include #include #include -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine - * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes - */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; - -/** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. - */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; -}; - -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - -/** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client - */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); - -/** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); - -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); - -/** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. - */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); - -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); - /* * M2P channels. * -- cgit v1.2.3 From 626a96db11698119a67eeda130488e869aa6f14e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sun, 29 May 2011 13:10:06 +0300 Subject: spi/ep93xx: add DMA support This patch adds DMA support for the EP93xx SPI driver. By default the DMA is not enabled but it can be enabled by setting ep93xx_spi_info.use_dma to true in board configuration file. Note that the SPI driver still uses PIO for small transfers (<= 8 bytes) for performance reasons. Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Acked-by: Vinod Koul Signed-off-by: Grant Likely --- arch/arm/mach-ep93xx/core.c | 6 +++++- arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 82079545adc4..cc9f1d4b104d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -488,11 +488,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961b3453..9bb63ac13f04 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** -- cgit v1.2.3 From 932036ce03f6c853a17005bced1e82b23f6378c0 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 28 Jun 2011 14:49:13 +0200 Subject: mach-jive: convert to spi_gpio Rather than the deprecated spi_s3c24xx_gpio driver. Compile tested only. Signed-off-by: Peter Korsgaard Acked-by: Ben Dooks Signed-off-by: Grant Likely --- arch/arm/mach-s3c2412/mach-jive.c | 41 +++++++++++++-------------------------- 1 file changed, 14 insertions(+), 27 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 85dcaeb9e62f..5eeb47580b0c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -25,6 +25,7 @@ #include