From 261cd3ad5d49ebf128afa5397763b27fe5c3d8f8 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Tue, 9 Jun 2015 13:37:59 +0930 Subject: ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3 Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable sound on Odroid-XU3 board using the max98090 audio codec. Signed-off-by: Anand Moon Reviewed-by: Lukasz Majewski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 9504e7790288..1b7253b9f117 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -144,6 +144,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SNOW=y +CONFIG_SND_SOC_ODROIDX2=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_XHCI_HCD=y -- cgit v1.2.3 From f7b5a58fd7f441f93279d964fe1ee4ff8669859e Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 8 Jul 2015 15:40:46 -0700 Subject: ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since were replaced by newer drivers that use the Generic PHY framework but their Kconfig options were left over in multi_v7_defconfig. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/configs/multi_v7_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6d83a1bf0c74..ee1a67dc5ef1 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -492,8 +492,6 @@ CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_OMAP_USB3=y -CONFIG_SAMSUNG_USB2PHY=y -CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y -- cgit v1.2.3 From cf91f6d94684b8c7b81c3558ad2639179d7c1da9 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 15 Jul 2015 18:32:44 +0200 Subject: ARM: multi_v7_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable module support for its driver and also for the needed Exynos ADC driver. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/configs/multi_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ee1a67dc5ef1..2fa1e54c1ed6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -357,6 +357,7 @@ CONFIG_POWER_RESET_SUN6I=y CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y +CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_RCAR_THERMAL=y @@ -614,6 +615,7 @@ CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_AT91_ADC=m +CONFIG_EXYNOS_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y -- cgit v1.2.3 From 3e5e95ff468b3d19fb08a308b921a83716650b48 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 15 Jul 2015 18:32:45 +0200 Subject: ARM: exynos_defconfig: Enable NTC Thermistors support The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have IIO based ADC thermistors. Enable built-in support for its driver. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1b7253b9f117..67965cedeb69 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -94,6 +94,7 @@ CONFIG_CHARGER_MAX14577=y CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_INA2XX=y CONFIG_THERMAL=y -- cgit v1.2.3 From c3e71f4b5f580b43e0eb3be18059c8844d8713e7 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 16 Jul 2015 08:39:42 +0200 Subject: ARM: multi_v7_defconfig: Enable max77802 regulator The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides other devices, a set of regulators that can be controller over I2C. Commit f3caa529c6f5 ("ARM: multi_v7_defconfig: Enable max77802 regulator, rtc and clock drivers") was supposed to enable the config option for the regulator driver as a module but the final version that landed did not include this. The commit was modified and the REGULATOR_MAX77802 removed since it was thought to be useless. Unfortunately that's not the case for the mentioned reason above so this patch enables the needed Kconfig option. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski [kgene@kernel.org: fixed ordering according to make savedefconfig] Signed-off-by: Kukjin Kim --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2fa1e54c1ed6..784491a63871 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -404,6 +404,7 @@ CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=m +CONFIG_REGULATOR_MAX77802=m CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y -- cgit v1.2.3 From 2b347c6494cbc6bfdc81b5201b8aa34afb2c3500 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 12 Aug 2015 07:47:17 +0900 Subject: ARM: exynos_defconfig: Enable cpufreq-dt driver With the latest patches the cpufreq-dt can be used on multiple Exynos SoCs: 3250, 4210, 4212, 4412 and 5250. Enable it along with default ondemand governor to conserve the energy, reduce temperature while maintaining acceptable performance. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 67965cedeb69..2263cd94cb93 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -27,6 +27,8 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y -- cgit v1.2.3 From c913f022dacad8c92ce1ed6bca7587e45a3b380e Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 1 Jul 2015 15:10:37 +0200 Subject: ARM: EXYNOS: switch to using generic cpufreq driver for exynos5250 The new CPU clock type allows the use of generic CPUfreq driver. Switch Exynos5250 to using generic cpufreq driver. Cc: Tomasz Figa Signed-off-by: Thomas Abraham [b.zolnierkie: split Exynos5250 support from the original patch] Signed-off-by: Bartlomiej Zolnierkiewicz Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Acked-by: Viresh Kumar Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 5f8ddcdeeacf..4015ec369ae5 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -226,6 +226,7 @@ static void __init exynos_init_irq(void) static const struct of_device_id exynos_cpufreq_matches[] = { { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, { /* sentinel */ } }; -- cgit v1.2.3 From 58c036a7ac417013bc01d09ae876265069e189d9 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 24 Jul 2015 12:58:41 +0900 Subject: ARM: EXYNOS: Add exynos3250 compatible to use generic cpufreq driver This patch add exynos3250 compatible string to exynos_cpufreq_matches for supporting generic cpufreq driver on Exynos3250. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Reviewed-by: Krzysztof Kozlowski Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 4015ec369ae5..77ac0216ddc4 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -225,6 +225,7 @@ static void __init exynos_init_irq(void) } static const struct of_device_id exynos_cpufreq_matches[] = { + { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, { /* sentinel */ } -- cgit v1.2.3 From 846c53009170bae6cfe0b75eb793c6966d2c0f83 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 1 Jul 2015 15:10:36 +0200 Subject: ARM: dts: add CPU OPP and regulator supply property for exynos5250 For Exynos5250 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson Cc: Andreas Faerber Signed-off-by: Thomas Abraham [b.zolnierkie: split Exynos5250 support from the original patch] [b.zolnierkie: added CPU regulator supply property for Spring boards] Signed-off-by: Bartlomiej Zolnierkiewicz Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Acked-by: Viresh Kumar Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 4 ++++ arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++++ arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++ arch/arm/boot/dts/exynos5250-spring.dts | 4 ++++ arch/arm/boot/dts/exynos5250.dtsi | 22 ++++++++++++++++++++++ 5 files changed, 38 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7e728a1b5559..db3f65f3eb45 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -117,6 +117,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; samsung,color-space = <0>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 4fe186d01f8a..15aea760c1da 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -74,6 +74,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { samsung,color-space = <0>; samsung,dynamic-range = <0>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b7f4122df456..a4133df953f3 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -235,6 +235,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index d03f9b8d376d..c1edd6d038a9 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -65,6 +65,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4a1f88300a28..b24610ea8c2a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -62,6 +62,28 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>; + + operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; cooling-min-level = <15>; cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ -- cgit v1.2.3 From 48816affd931c44045913873dff21693cd7fc948 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 24 Jul 2015 12:55:21 +0900 Subject: ARM: dts: Add CPU OPP and regulator supply property for exynos3250 This patch add CPU operating points which include CPU frequency and regulator voltage to use generic cpufreq drivers. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Reviewed-by: Krzysztof Kozlowski Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-monk.dts | 4 ++++ arch/arm/boot/dts/exynos3250-rinato.dts | 4 ++++ arch/arm/boot/dts/exynos3250.dtsi | 15 +++++++++++++++ 3 files changed, 23 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index a5863acc5fff..7863265d4868 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -141,6 +141,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &exynos_usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 031853b75528..ddd7ac283045 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -132,6 +132,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &exynos_usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 2db99433e17f..9e58a2322a2d 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -53,6 +53,21 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&cmu CLK_ARM_CLK>; + clock-names = "cpu"; + + operating-points = < + 1000000 1150000 + 900000 1112500 + 800000 1075000 + 700000 1037500 + 600000 1000000 + 500000 962500 + 400000 925000 + 300000 887500 + 200000 850000 + 100000 850000 + >; }; cpu1: cpu@1 { -- cgit v1.2.3 From f44997412e5b39b6a1231f16555120c5b2aae0ed Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Aug 2015 07:38:45 +0900 Subject: ARM: dts: add CPU OPP and regulator supply property for exynos4x12 For Exynos4x12 platforms, add CPU operating points (using opp-v2 bindings) and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Based on the earlier work by Thomas Abraham. Cc: Doug Anderson Cc: Andreas Faerber Cc: Thomas Abraham Reviewed-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Acked-by: Viresh Kumar Tested-by: Tobias Jakobi Signed-off-by: Bartlomiej Zolnierkiewicz Tested-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4212.dtsi | 81 ++++++++++++++++++++++++ arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 4 ++ arch/arm/boot/dts/exynos4412-origen.dts | 4 ++ arch/arm/boot/dts/exynos4412-trats2.dts | 4 ++ arch/arm/boot/dts/exynos4412.dtsi | 83 +++++++++++++++++++++++++ 5 files changed, 176 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index d9c8efeef208..538901123d37 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -30,6 +30,9 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; cooling-min-level = <13>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ @@ -39,6 +42,84 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + clock-latency-ns = <200000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <200000>; + }; + opp05 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp06 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + }; + opp07 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1087500>; + clock-latency-ns = <200000>; + }; + opp09 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <200000>; + }; + opp10 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1187500>; + clock-latency-ns = <200000>; + }; + opp11 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <200000>; + }; + opp12 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1287500>; + clock-latency-ns = <200000>; + }; + opp13 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + turbo-mode; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ca7d168d1dd6..db52841297a5 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -107,6 +107,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + /* RSTN signal for eMMC */ &sd1_cd { samsung,pin-pud = <0>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 84c76310b312..9d528af68c1a 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -78,6 +78,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &fimd { pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 884840059018..2a1ebb76ebe0 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -288,6 +288,10 @@ status = "okay"; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + &csis_0 { status = "okay"; vddcore-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index b78ada70bd05..ca0e3c15977f 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -30,6 +30,9 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; cooling-min-level = <13>; cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ @@ -39,18 +42,98 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@A02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@A03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp01 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <200000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <925000>; + clock-latency-ns = <200000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + clock-latency-ns = <200000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <200000>; + }; + opp05 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <987500>; + clock-latency-ns = <200000>; + }; + opp06 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + }; + opp07 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1087500>; + clock-latency-ns = <200000>; + }; + opp09 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <200000>; + }; + opp10 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1187500>; + clock-latency-ns = <200000>; + }; + opp11 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <200000>; + }; + opp12 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1287500>; + clock-latency-ns = <200000>; + }; + opp13 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + turbo-mode; }; }; -- cgit v1.2.3 From df09df6f9ac384fef825c2c21c62cd576acda17f Mon Sep 17 00:00:00 2001 From: Chanho Park Date: Thu, 30 Jul 2015 23:11:00 +0900 Subject: ARM: dts: add exynos5422-cpus.dtsi to correct cpu order The odroid-xu3 board which is based on exynos5422 not exynos5800 is booted from cortex-a7 core unlike exynos5800. The odroid-xu3's cpu order is quite strange. cpu0 and cpu5-7 are cortex-a7 cores and cpu1-4 are cortex-a15 cores. To correct this mis-odering, I added exynos5422-cpus.dtsi and reversing cpu orders from exynos5420. Now, cpu0-3 are cortex-a7 and cpu4-7 are cortex-a15. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Chanho Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5422-cpus.dtsi | 81 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 + 2 files changed, 82 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5422-cpus.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi new file mode 100644 index 000000000000..b7f60c855459 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -0,0 +1,81 @@ +/* + * SAMSUNG EXYNOS5422 SoC cpu device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The + * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting + * from Cortex-A15 core. + * + * EXYNOS5422 based board files can include this file to provide cpu ordering + * which could boot a cortex-a7 from cpu0. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&cpu0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; +}; + +&cpu4 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu5 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu6 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; + +&cpu7 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1565667e6f69..79ffdfe712aa 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -15,6 +15,7 @@ #include #include #include "exynos5800.dtsi" +#include "exynos5422-cpus.dtsi" #include "exynos5422-cpu-thermal.dtsi" / { -- cgit v1.2.3 From 5600f8cc8aa8bdcf335e84a7f85eae204b379bae Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Thu, 30 Jul 2015 23:02:22 +0900 Subject: ARM: dts: Add CPU cooling binding for exynos3250 boards This patch add the cooling device to control the overheating issue on Exynos3250-based Rinato/Monk board. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Acked-by Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-monk.dts | 15 +++++++++++++++ arch/arm/boot/dts/exynos3250-rinato.dts | 15 +++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 1 + 3 files changed, 31 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 7863265d4868..540a0adf2be6 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -116,6 +116,21 @@ min-microvolt = <1100000>; max-microvolt = <2700000>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Correspond to 500MHz at freq_table */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Correspond to 200MHz at freq_table */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; }; &adc { diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index ddd7ac283045..0e62a6435e07 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -107,6 +107,21 @@ min-microvolt = <1100000>; max-microvolt = <2700000>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>; + }; + }; + }; + }; }; &adc { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 9e58a2322a2d..033def482fc3 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -55,6 +55,7 @@ clock-frequency = <1000000000>; clocks = <&cmu CLK_ARM_CLK>; clock-names = "cpu"; + #cooling-cells = <2>; operating-points = < 1000000 1150000 -- cgit v1.2.3 From e0b12512b40c7a1cc0825773d118ecfdb464be41 Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Thu, 30 Jul 2015 23:12:43 +0900 Subject: ARM: dts: Add SPI CS on exynos5250-snow Although there is only one choice of chipselect it is necessary to specify it. The driver cannot claim the gpio otherwise. Signed-off-by: Michal Suchanek Acked-by: Javier Martinez Canillas Acked-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index a4133df953f3..0720caab5511 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -692,6 +692,7 @@ status = "okay"; samsung,spi-src-clk = <0>; num-cs = <1>; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; }; &usbdrd_dwc3 { -- cgit v1.2.3 From c8b34e36ca1a3e4c8ada87acefbb25119ee89347 Mon Sep 17 00:00:00 2001 From: Alexis Ballier Date: Fri, 14 Aug 2015 02:27:33 +0900 Subject: ARM: dts: enable SPI1 for exynos4412-odroidu3 SPI1 is available on IO Port #2 (as depicted on their website) in PCB Revision 0.5 of Hardkernel Odroid U3 board. The shield connects a 256KiB spi-nor flash on that bus. Signed-off-by: Alexis Ballier Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 44684e57ead1..8632f35c6c26 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" +#include / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; @@ -61,3 +62,10 @@ "Speakers", "SPKL", "Speakers", "SPKR"; }; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; -- cgit v1.2.3 From ba032795463bfc461937dbde7a345103a47f969b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 14 Aug 2015 02:29:48 +0900 Subject: ARM: dts: add iommu property to JPEG device for exynos4 JPEG codec node has been added in parallel to the patch, which added support for IOMMU to Exynos platform, so JPEG device for Exynos4 SoCs lacked IOMMU property. This patch fixes this issue. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index b0d52b1a646a..98c0a368b777 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -702,6 +702,7 @@ clocks = <&clock CLK_JPEG>; clock-names = "jpeg"; power-domains = <&pd_cam>; + iommus = <&sysmmu_jpeg>; }; hdmi: hdmi@12D00000 { -- cgit v1.2.3 From bdd2648e50508cbb2eb6d1c303e4d2d6d7505400 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Aug 2015 07:41:11 +0900 Subject: ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12 The new CPU clock type allows the use of generic CPUfreq driver. Switch Exynos4x12 to using generic cpufreq driver. Previously (when exynos-cpufreq driver was used with boost functionality) ARM_EXYNOS_CPU_FREQ_BOOST_SW config option (which enabled boost functionality) selected EXYNOS_THERMAL one. After switching Exynos4x12 platforms to use cpufreq-dt driver boost support is enabled in the cpufreq-dt driver itself (because there are turbo OPPs defined in the board's DTS file). However we still would like to allow enabling boost support only if thermal support is also enabled for Exynos platforms. To achieve this make ARCH_EXYNOS config option select THERMAL and EXYNOS_THERMAL ones. Please also note that the switch to use the generic cpufreq-dt driver fixes the minor issue present with the old code (support for 'boost' mode in the exynos-cpufreq driver was enabled for all supported SoCs even though 'boost' frequency was provided only for Exynos4x12 ones). Cc: Tomasz Figa Cc: Thomas Abraham Cc: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Acked-by: Viresh Kumar Tested-by: Tobias Jakobi Signed-off-by: Bartlomiej Zolnierkiewicz Tested-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/exynos.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 81064cd61a0a..a2d358d44aad 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -15,6 +15,7 @@ menuconfig ARCH_EXYNOS select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG + select EXYNOS_THERMAL select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -24,6 +25,7 @@ menuconfig ARCH_EXYNOS select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC select SRAM + select THERMAL select MFD_SYSCON help Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 77ac0216ddc4..1c47aee31e9c 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -227,6 +227,8 @@ static void __init exynos_init_irq(void) static const struct of_device_id exynos_cpufreq_matches[] = { { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" }, + { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" }, { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" }, { /* sentinel */ } }; -- cgit v1.2.3 From 10bfcfea9bbe91adf79cc4efc9c764edd0cbadda Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:44 -0700 Subject: ARM: dts: qcom: Label serial nodes for aliasing and stdout-path Add a label to the serial nodes that are being used for the console. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8660.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8960.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 7084010ee61b..0554fbd72c40 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -234,7 +234,7 @@ interrupts = <0 208 0>; }; - serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <0 114 0x0>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 9f727d8eadf6..fa698635eea0 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -197,7 +197,7 @@ syscon-tcsr = <&tcsr>; - serial@16340000 { + gsbi4_serial: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ef2fe72b54c9..e5f7f33aa467 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -98,7 +98,7 @@ syscon-tcsr = <&tcsr>; - serial@19c40000 { + gsbi12_serial: serial@19c40000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2096a94c9b52..134cd91d68ec 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -157,7 +157,7 @@ syscon-tcsr = <&tcsr>; - serial@16440000 { + gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d7c99b894a49..ab8e57250468 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -259,7 +259,7 @@ hwlocks = <&tcsr_mutex 3>; }; - serial@f991e000 { + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <0 108 0x0>; -- cgit v1.2.3 From 4e19db11e99b27bdd4817c3d58a7ead7af8d7d7c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:45 -0700 Subject: ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Mike Rapoport Cc: Igor Grinberg Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 34ccb260f12a..47c0282bdfca 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -4,6 +4,14 @@ model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { i2c1_pins: i2c1 { -- cgit v1.2.3 From 7f9e28b61057da3a4aa56a79436916a821e63a35 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:46 -0700 Subject: ARM: dts: qcom: apq8064-ifc6410: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 88d6655ddaf6..f3100da082b2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -10,6 +10,10 @@ serial1 = &gsbi6_serial; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { card_detect: card_detect { -- cgit v1.2.3 From 5f769789bdec38c1d5b19a8743924daf87f5d023 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:47 -0700 Subject: ARM: dts: qcom: apq8074-dragonboard: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index d484d08163e9..835bdc71c5ba 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -6,6 +6,14 @@ model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f991e000 { status = "ok"; -- cgit v1.2.3 From d92c945d854f9d973d3a0836548c93ed249b8f3a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:48 -0700 Subject: ARM: dts: qcom: apq8084-ifc6540: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index f7725b96612c..c9c2b769554f 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ8084/IFC6540"; compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; -- cgit v1.2.3 From ccfdf7cd7dfaa4140702ff43d760d0eb1578d725 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:49 -0700 Subject: ARM: dts: qcom: apq8084-mtp: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084-mtp.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index cb43acfc5d1d..3016c7048d44 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; -- cgit v1.2.3 From 9a61b3a39a88b955d89c5f19e01b0b19185ebce6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:50 -0700 Subject: ARM: dts: qcom: ipq8064-ap148: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Mathieu Olivari Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 55b2910efd87..d501382493e3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -4,6 +4,14 @@ model = "Qualcomm IPQ8064/AP148"; compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From a96731089e8e0d550f017359dacaee19463517c7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:51 -0700 Subject: ARM: dts: qcom: msm8660-surf: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index e0883c376248..b17f379e8c2a 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@19c00000 { status = "ok"; -- cgit v1.2.3 From c0ed595961c44beea0d0dc3b0e2b1ef354931bdf Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:52 -0700 Subject: ARM: dts: qcom: msm8960-cdp: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index fad71d5527b0..b72a55462caf 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@16400000 { status = "ok"; -- cgit v1.2.3 From 8f1dc3cf8f1e617ec888bcdb69111aae9bf4a9e0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:53 -0700 Subject: ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Tim Bird Cc: Bjorn Andersson Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index bd35b0674ff6..eb547f1f6a60 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -6,6 +6,14 @@ model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { reg = <0 0x40000000>, <0x40000000 0x40000000>; device_type = "memory"; -- cgit v1.2.3 From ae1973a2df8ea48ab04cd406c569ce0b5721dd99 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 4 Sep 2015 17:43:15 +0530 Subject: ARM: multi_v7_defconfig: Enable PBIAS regulator PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4, OMAP5 and DRA7 SoCs. Enable it here. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Kevin Hilman --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 824a0cff3998..52ebbc5570ff 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -411,6 +411,7 @@ CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=m CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_PWM=m CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y -- cgit v1.2.3