From 9007d1007317658d5b32bda9f59c797c59ce4d47 Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Wed, 18 Apr 2012 11:06:40 +0100 Subject: ARM: kirkwood: Basic support for DNS-320 and DNS-325 Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-dns320.dts | 29 ++++ arch/arm/boot/dts/kirkwood-dns325.dts | 24 +++ arch/arm/mach-kirkwood/Kconfig | 8 + arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 2 + arch/arm/mach-kirkwood/board-dnskw.c | 275 ++++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-dt.c | 5 + arch/arm/mach-kirkwood/common.h | 6 + 8 files changed, 350 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-dns320.dts create mode 100644 arch/arm/boot/dts/kirkwood-dns325.dts create mode 100644 arch/arm/mach-kirkwood/board-dnskw.c (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts new file mode 100644 index 000000000000..78c834f6c57f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS-320 NAS (Rev A1)"; + compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + serial@12100 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts new file mode 100644 index 000000000000..23241abca1e7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -0,0 +1,24 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS-325 NAS (Rev A1)"; + compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 90ceab761929..636778e7c526 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,14 @@ config MACH_DREAMPLUG_DT Say 'Y' here if you want your kernel to support the Marvell DreamPlug (Flattened Device Tree). +config MACH_DLINK_KIRKWOOD_DT + bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, + using Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e299a9576bf0..36781b318ebc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o +obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 16f938522304..8bbffbe1d9ce 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -3,3 +3,5 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c new file mode 100644 index 000000000000..58c2d68f9443 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -0,0 +1,275 @@ +/* + * Copyright 2012 (C), Jamie Lentin + * + * arch/arm/mach-kirkwood/board-dnskw.c + * + * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dnskw_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data dnskw_sata_data = { + .n_ports = 2, +}; + +static unsigned int dnskw_mpp_config[] __initdata = { + MPP13_UART1_TXD, /* Custom ... */ + MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ + MPP20_SATA1_ACTn, /* LED: White Right HDD */ + MPP21_SATA0_ACTn, /* LED: White Left HDD */ + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, /* LED: Power */ + MPP27_GPIO, /* LED: Red Right HDD */ + MPP28_GPIO, /* LED: Red Left HDD */ + MPP29_GPIO, /* LED: Red USB (DNS-325 only) */ + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPO, + MPP34_GPIO, /* Button: Front power */ + MPP35_GPIO, /* LED: Red USB (DNS-320 only) */ + MPP36_GPIO, /* Power: Turn off board */ + MPP37_GPIO, /* Power: Turn back on after power failure */ + MPP38_GPIO, + MPP39_GPIO, /* Power: SATA0 */ + MPP40_GPIO, /* Power: SATA1 */ + MPP41_GPIO, /* SATA0 present */ + MPP42_GPIO, /* SATA1 present */ + MPP43_GPIO, /* LED: White USB */ + MPP44_GPIO, /* Fan: Tachometer Pin */ + MPP45_GPIO, /* Fan: high speed */ + MPP46_GPIO, /* Fan: low speed */ + MPP47_GPIO, /* Button: Back unmount */ + MPP48_GPIO, /* Button: Back reset */ + MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */ + 0 +}; + +static struct gpio_led dns325_led_pins[] = { + { + .name = "dns325:white:power", + .gpio = 26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "dns325:white:usb", + .gpio = 43, + .active_low = 1, + }, + { + .name = "dns325:red:l_hdd", + .gpio = 28, + .active_low = 1, + }, + { + .name = "dns325:red:r_hdd", + .gpio = 27, + .active_low = 1, + }, + { + .name = "dns325:red:usb", + .gpio = 29, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns325_led_data = { + .num_leds = ARRAY_SIZE(dns325_led_pins), + .leds = dns325_led_pins, +}; + +static struct platform_device dns325_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dns325_led_data, + }, +}; + +static struct gpio_led dns320_led_pins[] = { + { + .name = "dns320:blue:power", + .gpio = 26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "dns320:blue:usb", + .gpio = 43, + .active_low = 1, + }, + { + .name = "dns320:orange:l_hdd", + .gpio = 28, + .active_low = 1, + }, + { + .name = "dns320:orange:r_hdd", + .gpio = 27, + .active_low = 1, + }, + { + .name = "dns320:orange:usb", + .gpio = 35, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns320_led_data = { + .num_leds = ARRAY_SIZE(dns320_led_pins), + .leds = dns320_led_pins, +}; + +static struct platform_device dns320_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dns320_led_data, + }, +}; + +static struct i2c_board_info dns325_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("lm75", 0x48), + }, + /* Something at 0x0c also */ +}; + +static struct gpio_keys_button dnskw_button_pins[] = { + { + .code = KEY_POWER, + .gpio = 34, + .desc = "Power button", + .active_low = 1, + }, + { + .code = KEY_EJECTCD, + .gpio = 47, + .desc = "USB unmount button", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 48, + .desc = "Reset button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data dnskw_button_data = { + .buttons = dnskw_button_pins, + .nbuttons = ARRAY_SIZE(dnskw_button_pins), +}; + +static struct platform_device dnskw_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &dnskw_button_data, + } +}; + +/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ +static struct gpio_fan_speed dnskw_fan_speed[] = { + { 0, 0 }, + { 3000, 1 }, + { 6000, 2 }, +}; +static unsigned dnskw_fan_pins[] = {46, 45}; + +static struct gpio_fan_platform_data dnskw_fan_data = { + .num_ctrl = ARRAY_SIZE(dnskw_fan_pins), + .ctrl = dnskw_fan_pins, + .num_speed = ARRAY_SIZE(dnskw_fan_speed), + .speed = dnskw_fan_speed, +}; + +static struct platform_device dnskw_fan_device = { + .name = "gpio-fan", + .id = -1, + .dev = { + .platform_data = &dnskw_fan_data, + }, +}; + +static void dnskw_power_off(void) +{ + gpio_set_value(36, 1); +} + +/* Register any GPIO for output and set the value */ +static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) +{ + if (gpio_request(gpio, name) == 0 && + gpio_direction_output(gpio, 0) == 0) { + gpio_set_value(gpio, def); + if (gpio_export(gpio, 0) != 0) + pr_err("dnskw: Failed to export GPIO %s\n", name); + } else + pr_err("dnskw: Failed to register %s\n", name); +} + +void __init dnskw_init(void) +{ + kirkwood_mpp_conf(dnskw_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dnskw_ge00_data); + kirkwood_sata_init(&dnskw_sata_data); + kirkwood_i2c_init(); + + platform_device_register(&dnskw_button_device); + platform_device_register(&dnskw_fan_device); + + if (of_machine_is_compatible("dlink,dns-325")) { + i2c_register_board_info(0, dns325_i2c_board_info, + ARRAY_SIZE(dns325_i2c_board_info)); + platform_device_register(&dns325_led_device); + + } else if (of_machine_is_compatible("dlink,dns-320")) + platform_device_register(&dns320_led_device); + + /* Register power-off GPIO. */ + if (gpio_request(36, "dnskw:power:off") == 0 + && gpio_direction_output(36, 0) == 0) + pm_power_off = dnskw_power_off; + else + pr_err("dnskw: failed to configure power-off GPIO\n"); + + /* Ensure power is supplied to both HDDs */ + dnskw_gpio_register(39, "dnskw:power:sata0", 1); + dnskw_gpio_register(40, "dnskw:power:sata1", 1); + + /* Set NAS to turn back on after a power failure */ + dnskw_gpio_register(37, "dnskw:power:recover", 1); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index f7fe1b9f3170..3ade0ec20c9f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -56,11 +56,16 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) + dnskw_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); } static const char *kirkwood_dt_board_compat[] = { "globalscale,dreamplug", + "dlink,dns-320", + "dlink,dns-325", NULL }; diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index fa8e7689c436..6195a3770800 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,12 @@ void dreamplug_init(void); static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT +void dnskw_init(void); +#else +static inline void dnskw_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v1.2.3