From 1286eeb2fd22ddb4c56390f957e854ec06bab9fd Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 19 Apr 2011 10:15:36 -0600 Subject: OMAP2+: hwmod data: Fix wrong dma_system end address OMAP2420, 2430 and 3xxx were using the OMAP4 end address that unfortunately is not located at the same base address. Moreover the OMAP4 size was set to 256 instead of 4096. Change all .pa_end to set them to .pa_start + 0xfff Cc: "G, Manjunath Kondaiah" Cc: Benoit Cousson Reported-by: Michael Fillinger Signed-off-by: Benoit Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8eb3ce1bbfbe..f50e56a8115b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1782,7 +1782,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index e6e3810db77f..96753f79a754 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1915,7 +1915,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b98e2dfcba28..9bee15575988 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2386,7 +2386,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3f8ef3..abc548a0c98d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; -- cgit v1.2.3 From 2df122f52fd31c327e0aa05caf6017ecd7867d5f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 4 Apr 2011 09:26:19 +0300 Subject: OMAP4: clock data: Change DSS clock aliases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DSS driver has used fck and ick clocks on OMAP2/3 to get DSS HW up and running, and also to get the pixel clock's source clock rate from the fck. On OMAP4 the clock data is set up in a different way, as there's no ick, dss_fck points to a fake clock which just affects DSS's MODULEMODE, and dss_dss_clk if the DSS_FCK. >From DSS driver's point of view the dss_fck sounds like an ick, and dss_dss_clk is the fck. While this is not entirely correct from HW point of view, especially for the ick, configuring the clock aliases that way makes DSS "just work" with OMAP4's clock setup. In the (hopefully near) future DSS driver will be reworked to use pm_runtime support which should clean up the clock code. Signed-off-by: Tomi Valkeinen Cc: Benoît Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 276992d3b7fb..8c965671b4d4 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_fck, CK_443X), - /* - * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility - * with OMAP2/3. - */ - CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), -- cgit v1.2.3 From 8bc2e98bcb280009cb0f85ce64e5f79b1669f9ff Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 13 Apr 2011 18:21:06 +0300 Subject: OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area The saving of CCR.CM_AUTOIDLE_PLL is done in scratchpad area. However, in current code, the saving is done for CM_AUTOIDLE2_PLL (offset 0x34) instead of CM_AUTOIDLE_PLL (offset 0x30). This patch changes the code to save the correct register. Signed-off-by: Eduardo Valentin Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/control.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 695279419020..df0c75c31998 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -317,7 +317,7 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = -- cgit v1.2.3 From a8ae645c014bc01090367de84f7601ad11628971 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 13 Apr 2011 18:21:07 +0300 Subject: OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm2xxx_3xxx.c | 17 +++++++++++++++++ arch/arm/mach-omap2/control.c | 8 +++++++- 2 files changed, 24 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec806e92..38830d8d4783 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index df0c75c31998..da53ba3917ca 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = -- cgit v1.2.3 From f95440ca5bdd3ed3e31c2fbad07b9056b31ad18c Mon Sep 17 00:00:00 2001 From: "Avinash.H.M" Date: Tue, 5 Apr 2011 21:10:15 +0530 Subject: OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup. GPIO module expects the debounce clocks to be enabled during reset. It doesn't reset properly and timeouts are seen, if this clock isn't enabled during reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with which the debounce clocks are enabled during reset. Cc: Rajendra Nayak Cc: Paul Walmsley Cc: Benoit Cousson Cc: Kevin Hilman Signed-off-by: Avinash.H.M Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 5 +++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 ++++++ 3 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index f50e56a8115b..c4d0ae87d62a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 96753f79a754..9682dd519f8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9bee15575988..909a84de6682 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", -- cgit v1.2.3 From 6ba5932ca4b610d036cb89d0ce2a465d06504c4d Mon Sep 17 00:00:00 2001 From: Oskar Andero Date: Tue, 26 Apr 2011 02:24:50 -0700 Subject: arm: omap2: enable smc instruction for sleep34xx This fixes broken build when using binutils 2.21. Signed-off-by: Oskar Andero Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd6409686..512b15204450 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG -- cgit v1.2.3 From bc16b3777ec3749c086a17f81c99f8643f4a6576 Mon Sep 17 00:00:00 2001 From: omar ramirez Date: Tue, 26 Apr 2011 02:24:50 -0700 Subject: OMAP3: l3: fix for "irq 10: nobody cared" message If an error occurs in the L3 on any other initiator than MPU, the interrupt goes unhandled given that the 'base' register was calculated with the initialized err_source value (which coincidentally points to MPU) and not with the actual source of the error. Removed parenthesis that are not needed for the touched lines. Signed-off-by: Omar Ramirez Luna Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_l3_smx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 5f2da7565b68..4321e7938929 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { -- cgit v1.2.3 From 26a064d5246e8ac51241d6ec2792aebf24f3b41a Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Tue, 26 Apr 2011 02:45:28 -0700 Subject: omap: rx51: mark reserved memory earlier So that omap_vram_set_sdram_vram() is called before omap_vram_reserve_sdram_memblock(). Signed-off-by: Felipe Contreras Acked-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895b80e8..f8ba20a14e62 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, -- cgit v1.2.3 From 919686458fabc67a13ffa412f9e5a8fed46d10b8 Mon Sep 17 00:00:00 2001 From: Shweta Gulati Date: Tue, 26 Apr 2011 02:32:26 -0700 Subject: OMAP4: Intialize IVA Device in addition to DSP device. OMAP4 has two different Devices IVA and DSP. DSP is bound with IVA for DVFS. The registration of IVA dev in API 'omap2_init_processor_devices' was missing. Init dev for 'iva_dev' is added. This also fixes the following error seen during boot as omap2_set_init_voltage can now find the iva device omap2_set_init_voltage: Invalid parameters! omap2_set_init_voltage: Unable to put vdd_iva to its init voltage Signed-off-by: Shweta Gulati Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af3351c2d6..49486f522dca 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } -- cgit v1.2.3 From 3f126087ee143775961947b39416aad03044c988 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 26 Apr 2011 02:33:10 -0700 Subject: OMAP3+: voltage: remove initial voltage Blindly setting 1.2V in the initial structure may not even match the default voltages stored in the voltage table which are supported for the domain. For example, OMAP3430 core domain does not use 1.2V and ends up generating a warning on the first transition. Further, since omap2_set_init_voltage is called as part of the pm framework's initialization sequence to configure the voltage required for the current OPP, the call does(and has to) setup the system voltage(curr_volt as a result) using the right mechanisms appropriate for the system at that point of time. This also overrides initialization we are currently doing in voltage.c making it redundant. So, remove the wrong and redundant initialization. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/voltage.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6fb520999b6e..0c1552d9d995 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; -- cgit v1.2.3