From 07633b5d0723ce2ec31262e1096dcf61311bf078 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 14 May 2008 16:17:00 -0700 Subject: ata: remove FIT() macro Use the kernel-provided clamp_val() macro. FIT was always applied to a member of struct ata_timing (unsigned short) and two constants. clamp_val will not cast to short anymore. Signed-off-by: Harvey Harrison Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 50 +++++++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'drivers/ata/pata_legacy.c') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 7af4b29cc422..fe7cc8ed4ea4 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -343,8 +343,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); - active = FIT(t.active, 2, 15); - recover = FIT(t.recover, 4, 15); + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 4, 15); inb(0x3E6); inb(0x3E6); @@ -377,8 +377,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); - active = FIT(t.active, 2, 15); - recover = FIT(t.recover, 2, 16); + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 2, 16); recover &= 0x15; inb(0x3E6); @@ -462,9 +462,9 @@ static void opti82c611a_set_piomode(struct ata_port *ap, ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } - active = FIT(t.active, 2, 17) - 2; - recover = FIT(t.recover, 1, 16) - 1; - setup = FIT(t.setup, 1, 4) - 1; + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); @@ -541,9 +541,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } - active = FIT(t.active, 2, 17) - 2; - recover = FIT(t.recover, 1, 16) - 1; - setup = FIT(t.setup, 1, 4) - 1; + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); @@ -624,11 +624,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; @@ -658,11 +658,11 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; @@ -695,11 +695,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; ld_qdi->clock[adev->devno] = timing; @@ -830,8 +830,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) else ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - active = (FIT(t.active, 3, 17) - 1) & 0x0F; - recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; + recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; timing = (active << 4) | recovery; winbond_writecfg(ld_winbond->timing, timing, reg); @@ -842,7 +842,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) reg |= 0x08; /* FIFO off */ if (!ata_pio_need_iordy(adev)) reg |= 0x02; /* IORDY off */ - reg |= (FIT(t.setup, 0, 3) << 6); + reg |= (clamp_val(t.setup, 0, 3) << 6); winbond_writecfg(ld_winbond->timing, timing + 1, reg); } -- cgit v1.2.3