From 8d7b1c70b3c1aac4b63109f5c73f732f1d63fad6 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 31 Jan 2011 08:39:24 -0800 Subject: ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_ Commit 40d69ba029c8d5de51aaeb5358999266c482d00a ("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)") used pr_. Add #define pr_fmt and remove DRV_NAME. Increment driver version numbers. Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 7 ++++--- drivers/ata/pata_hpt37x.c | 23 ++++++++++++----------- drivers/ata/pata_hpt3x2n.c | 13 +++++++------ 3 files changed, 23 insertions(+), 20 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 538ec38ba995..6c77d68dbd05 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -14,6 +14,7 @@ * Look into engine reset on timeout errors. Should not be required. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include @@ -25,7 +26,7 @@ #include #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.10" +#define DRV_VERSION "0.6.11" struct hpt_clock { u8 xfer_mode; @@ -160,8 +161,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - pr_warning(DRV_NAME ": %s is not supported for %s.\n", - modestr, list[i]); + pr_warn("%s is not supported for %s\n", + modestr, list[i]); return 1; } i++; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 4c5b5183225e..9620636aa405 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -14,6 +14,8 @@ * Look into engine reset on timeout errors. Should not be required. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -24,7 +26,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.22" +#define DRV_VERSION "0.6.23" struct hpt_clock { u8 xfer_speed; @@ -229,8 +231,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - pr_warning(DRV_NAME ": %s is not supported for %s.\n", - modestr, list[i]); + pr_warn("%s is not supported for %s\n", + modestr, list[i]); return 1; } i++; @@ -863,8 +865,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) chip_table = &hpt372; break; default: - pr_err(DRV_NAME ": Unknown HPT366 subtype, " - "please report (%d).\n", rev); + pr_err("Unknown HPT366 subtype, please report (%d)\n", + rev); return -ENODEV; } break; @@ -904,8 +906,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) *ppi = &info_hpt374_fn1; break; default: - pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n", - dev->device); + pr_err("PCI table is bogus, please report (%d)\n", dev->device); return -ENODEV; } /* Ok so this is a chip we support */ @@ -953,7 +954,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 sr; u32 total = 0; - pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n"); + pr_warn("BIOS has not set timing clocks\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -1009,7 +1010,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - pr_err(DRV_NAME ": DPLL did not stabilize!\n"); + pr_err("DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1017,7 +1018,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) else private_data = (void *)hpt37x_timings_50; - pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n", + pr_info("bus clock %dMHz, using %dMHz DPLL\n", MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; @@ -1032,7 +1033,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (clock_slot < 2 && ppi[0] == &info_hpt370a) ppi[0] = &info_hpt370a_33; - pr_info(DRV_NAME ": %s using %dMHz bus clock.\n", + pr_info("%s using %dMHz bus clock\n", chip_table->name, MHz[clock_slot]); } diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index eca68caf5f46..765f136d8cd3 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -15,6 +15,8 @@ * Work out best PLL policy */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -25,7 +27,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.14" +#define DRV_VERSION "0.3.15" enum { HPT_PCI_FAST = (1 << 31), @@ -418,7 +420,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) u16 sr; u32 total = 0; - pr_warning(DRV_NAME ": BIOS clock data not set.\n"); + pr_warn("BIOS clock data not set\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -528,8 +530,7 @@ hpt372n: ppi[0] = &info_hpt372n; break; default: - pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n", - dev->device); + pr_err("PCI table is bogus, please report (%d)\n", dev->device); return -ENODEV; } @@ -578,11 +579,11 @@ hpt372n: pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); } if (adjust == 8) { - pr_err(DRV_NAME ": DPLL did not stabilize!\n"); + pr_err("DPLL did not stabilize!\n"); return -ENODEV; } - pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz); + pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz); /* * Set our private data up. We only need a few flags -- cgit v1.2.3