From 91f15fb30c77d4a0d0d9b97e5cec647650853145 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 24 Aug 2015 15:27:11 -0500 Subject: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at function 1 doesn't work if it is powered on before the SATA controller at function 0. The result is that PATA doesn't work after resume, and we print messages like this: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 irq 17: nobody cared (try booting with the "irqpoll" option) Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep: Asynchronous threads for resume_noirq"). Prior to that, we powered on the functions in order, so this problem shouldn't happen. e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361") solved the problem for JMicron 361 and 363 devices. With async suspend disabled, we always power on function 0 before function 1. Barto then reported the same problem with a JMicron 368 (see comment #57 in the bugzilla). Rather than extending the blacklist piecemeal, disable async suspend for all JMicron multi-function SATA/PATA/AHCI devices. This quirk could stay in the ahci and pata_jmicron drivers, but it's likely the problem will occur even if pata_jmicron isn't loaded until after the suspend/resume. Making it a PCI quirk ensures that we'll preserve the power-on order even if the drivers aren't loaded. [bhelgaas: changelog, limit to multi-function, limit to IDE/ATA] Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-and-tested-by: Barto Signed-off-by: Zhang Rui Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v3.15+ --- drivers/ata/ahci.c | 13 +------------ drivers/ata/pata_jmicron.c | 12 ------------ 2 files changed, 1 insertion(+), 24 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7e62751abfac..a46660204e3a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* JMicron 362B and 362C have an AHCI function with IDE class code */ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, + /* May need to update quirk_jmicron_async_suspend() for additions */ /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ @@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 47e418b8c8ba..4d1a5d2c4287 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; const struct ata_port_info *ppi[] = { &info, NULL }; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0); } -- cgit v1.2.3