From 5ae73518cb39dd81e641dfa7ce20751c853579e0 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Fri, 19 Mar 2010 00:38:29 +0100 Subject: firewire: core: fix Model_ID in modalias MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The modalias string of devices that represent units on a FireWire node did not show Module_ID entries within unit directories. This was because firewire-core searched only the root directory of the configuration ROM for a Model_ID entry. We now search first the root directory, then the unit directory. IOW honor a unit directory's Model_ID if present, otherwise fall back to the root directory's model ID (if present). Furthermore, apply the same change to Vendor_ID. This had the same issue but it was less apparent because most devices provide Vendor_ID only in the root directory. And finally, also use this strategy for the remaining two IDs in the modalias, Specifier_ID and Version. It does not actually make sense to look for them elsewhere than in the unit directory because they are mandatory there. However, a uniform search order simplifies the implementation and has no adverse affect in practice. Side notes: - The older counterpart of this, nodemgr.c of ieee1394, looked for Vendor_ID first in the root directory, then in the unit directory, and for Model_ID only in the unit directory. - There is a single mainline driver which requires Vendor_ID and Model_ID --- the firedtv driver. This one worked because FireDTVs provide Vendor_ID in the root directory and Model_ID identically in root directory and unit directory. - Apart from firedtv, there are currently no drivers known to me (including userspace drivers) that look at the Vendor_ID or Model_ID of the modalias. Reported-by: Maciej Żenczykowski Signed-off-by: Stefan Richter --- drivers/firewire/core-device.c | 40 ++++++++++++++-------------------------- 1 file changed, 14 insertions(+), 26 deletions(-) (limited to 'drivers/firewire/core-device.c') diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index 014cabd3afda..c91d7179eb96 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -180,44 +180,32 @@ static int fw_unit_match(struct device *dev, struct device_driver *drv) return 0; } -static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size) +static void get_modalias_ids(const u32 *directory, int *id) { - struct fw_device *device = fw_parent_device(unit); struct fw_csr_iterator ci; - int key, value; - int vendor = 0; - int model = 0; - int specifier_id = 0; - int version = 0; - fw_csr_iterator_init(&ci, &device->config_rom[5]); + fw_csr_iterator_init(&ci, directory); while (fw_csr_iterator_next(&ci, &key, &value)) { switch (key) { - case CSR_VENDOR: - vendor = value; - break; - case CSR_MODEL: - model = value; - break; + case CSR_VENDOR: id[0] = value; break; + case CSR_MODEL: id[1] = value; break; + case CSR_SPECIFIER_ID: id[2] = value; break; + case CSR_VERSION: id[3] = value; break; } } +} - fw_csr_iterator_init(&ci, unit->directory); - while (fw_csr_iterator_next(&ci, &key, &value)) { - switch (key) { - case CSR_SPECIFIER_ID: - specifier_id = value; - break; - case CSR_VERSION: - version = value; - break; - } - } +static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size) +{ + int id[] = {0, 0, 0, 0}; + + get_modalias_ids(&fw_parent_device(unit)->config_rom[5], id); + get_modalias_ids(unit->directory, id); return snprintf(buffer, buffer_size, "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", - vendor, model, specifier_id, version); + id[0], id[1], id[2], id[3]); } static int fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env) -- cgit v1.2.3 From fe43d6d9cf59d8f8cbfdcde2018de13ffd1285c7 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Fri, 19 Mar 2010 00:39:07 +0100 Subject: firewire: core: align driver match with modalias The driver match strategy was: - Match vendor/model/specifier/version of the unit directory. - If that was a miss, match vendor from the root directory and model/specifier/version of the unit directory. This was inconsistent with how the modalias string was constructed until recently (take vendor/model from root directory and specifier/ version from unit directory). It was also inconsistent with how it is done since the parent commit: - Use vendor/model/specifier/version of the unit directory if possible, - fall back to one or more of vendor/model/specifier/version from the root directory depending on which ones are not present at the unit directory. Fix this inconsistency by sharing the ROM scanner function between modalias printer function and driver match function. Signed-off-by: Stefan Richter --- drivers/firewire/core-device.c | 87 ++++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 49 deletions(-) (limited to 'drivers/firewire/core-device.c') diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index c91d7179eb96..92b633d643f2 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -127,81 +127,70 @@ int fw_csr_string(const u32 *directory, int key, char *buf, size_t size) } EXPORT_SYMBOL(fw_csr_string); -static bool is_fw_unit(struct device *dev); - -static int match_unit_directory(const u32 *directory, u32 match_flags, - const struct ieee1394_device_id *id) +static void get_ids(const u32 *directory, int *id) { struct fw_csr_iterator ci; - int key, value, match; + int key, value; - match = 0; fw_csr_iterator_init(&ci, directory); while (fw_csr_iterator_next(&ci, &key, &value)) { - if (key == CSR_VENDOR && value == id->vendor_id) - match |= IEEE1394_MATCH_VENDOR_ID; - if (key == CSR_MODEL && value == id->model_id) - match |= IEEE1394_MATCH_MODEL_ID; - if (key == CSR_SPECIFIER_ID && value == id->specifier_id) - match |= IEEE1394_MATCH_SPECIFIER_ID; - if (key == CSR_VERSION && value == id->version) - match |= IEEE1394_MATCH_VERSION; + switch (key) { + case CSR_VENDOR: id[0] = value; break; + case CSR_MODEL: id[1] = value; break; + case CSR_SPECIFIER_ID: id[2] = value; break; + case CSR_VERSION: id[3] = value; break; + } } +} - return (match & match_flags) == match_flags; +static void get_modalias_ids(struct fw_unit *unit, int *id) +{ + get_ids(&fw_parent_device(unit)->config_rom[5], id); + get_ids(unit->directory, id); +} + +static bool match_ids(const struct ieee1394_device_id *id_table, int *id) +{ + int match = 0; + + if (id[0] == id_table->vendor_id) + match |= IEEE1394_MATCH_VENDOR_ID; + if (id[1] == id_table->model_id) + match |= IEEE1394_MATCH_MODEL_ID; + if (id[2] == id_table->specifier_id) + match |= IEEE1394_MATCH_SPECIFIER_ID; + if (id[3] == id_table->version) + match |= IEEE1394_MATCH_VERSION; + + return (match & id_table->match_flags) == id_table->match_flags; } +static bool is_fw_unit(struct device *dev); + static int fw_unit_match(struct device *dev, struct device_driver *drv) { - struct fw_unit *unit = fw_unit(dev); - struct fw_device *device; - const struct ieee1394_device_id *id; + const struct ieee1394_device_id *id_table = + container_of(drv, struct fw_driver, driver)->id_table; + int id[] = {0, 0, 0, 0}; /* We only allow binding to fw_units. */ if (!is_fw_unit(dev)) return 0; - device = fw_parent_device(unit); - id = container_of(drv, struct fw_driver, driver)->id_table; + get_modalias_ids(fw_unit(dev), id); - for (; id->match_flags != 0; id++) { - if (match_unit_directory(unit->directory, id->match_flags, id)) + for (; id_table->match_flags != 0; id_table++) + if (match_ids(id_table, id)) return 1; - /* Also check vendor ID in the root directory. */ - if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) && - match_unit_directory(&device->config_rom[5], - IEEE1394_MATCH_VENDOR_ID, id) && - match_unit_directory(unit->directory, id->match_flags - & ~IEEE1394_MATCH_VENDOR_ID, id)) - return 1; - } - return 0; } -static void get_modalias_ids(const u32 *directory, int *id) -{ - struct fw_csr_iterator ci; - int key, value; - - fw_csr_iterator_init(&ci, directory); - while (fw_csr_iterator_next(&ci, &key, &value)) { - switch (key) { - case CSR_VENDOR: id[0] = value; break; - case CSR_MODEL: id[1] = value; break; - case CSR_SPECIFIER_ID: id[2] = value; break; - case CSR_VERSION: id[3] = value; break; - } - } -} - static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size) { int id[] = {0, 0, 0, 0}; - get_modalias_ids(&fw_parent_device(unit)->config_rom[5], id); - get_modalias_ids(unit->directory, id); + get_modalias_ids(unit, id); return snprintf(buffer, buffer_size, "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", -- cgit v1.2.3 From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- drivers/firewire/core-device.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/firewire/core-device.c') diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index 882472d1e144..4b8523f00dce 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3