From aca429ff9d14f0f55f6d319d6bb1dfc2bbee09fe Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 21 May 2018 11:00:02 +0100 Subject: gpio: madera: Support Cirrus Logic Madera class codecs This adds support for the GPIOs on Cirrus Logic Madera class codecs. Any pins not used for special functions (see the pinctrl driver) can be used as general single-bit input or output lines. The number of available GPIOs varies between codecs. Note that this is part of a composite MFD for these codecs and can only be used with the corresponding MFD and other child drivers on those silicon. The GPIO block on these codecs does not exist indepedently of the rest of the MFD. Signed-off-by: Nariman Poushin Signed-off-by: Richard Fitzgerald Signed-off-by: Charles Keepax Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 206 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 213 insertions(+) create mode 100644 drivers/gpio/gpio-madera.c (limited to 'drivers/gpio') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b960f6f35abd..08c2c121a6dc 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1027,6 +1027,12 @@ config GPIO_LP87565 This driver can also be built as a module. If so, the module will be called gpio-lp87565. +config GPIO_MADERA + tristate "Cirrus Logic Madera class codecs" + depends on PINCTRL_MADERA + help + Support for GPIOs on Cirrus Logic Madera class codecs. + config GPIO_MAX77620 tristate "GPIO support for PMIC MAX77620 and MAX20024" depends on MFD_MAX77620 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 1324c8f966a7..22bef2e7c162 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o +obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o diff --git a/drivers/gpio/gpio-madera.c b/drivers/gpio/gpio-madera.c new file mode 100644 index 000000000000..7ba68d1a0932 --- /dev/null +++ b/drivers/gpio/gpio-madera.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPIO support for Cirrus Logic Madera codecs + * + * Copyright (C) 2015-2018 Cirrus Logic + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2. + */ + +#include +#include +#include +#include + +#include +#include +#include + +struct madera_gpio { + struct madera *madera; + /* storage space for the gpio_chip we're using */ + struct gpio_chip gpio_chip; +}; + +static int madera_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int val; + int ret; + + ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset, + &val); + if (ret < 0) + return ret; + + return !!(val & MADERA_GP1_DIR_MASK); +} + +static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + + return regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_2 + reg_offset, + MADERA_GP1_DIR_MASK, MADERA_GP1_DIR); +} + +static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int val; + int ret; + + ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset, + &val); + if (ret < 0) + return ret; + + return !!(val & MADERA_GP1_LVL_MASK); +} + +static int madera_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int reg_val = value ? MADERA_GP1_LVL : 0; + int ret; + + ret = regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_2 + reg_offset, + MADERA_GP1_DIR_MASK, 0); + if (ret < 0) + return ret; + + return regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_1 + reg_offset, + MADERA_GP1_LVL_MASK, reg_val); +} + +static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct madera_gpio *madera_gpio = gpiochip_get_data(chip); + struct madera *madera = madera_gpio->madera; + unsigned int reg_offset = 2 * offset; + unsigned int reg_val = value ? MADERA_GP1_LVL : 0; + int ret; + + ret = regmap_update_bits(madera->regmap, + MADERA_GPIO1_CTRL_1 + reg_offset, + MADERA_GP1_LVL_MASK, reg_val); + + /* set() doesn't return an error so log a warning */ + if (ret) + dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n", + MADERA_GPIO1_CTRL_1 + reg_offset, ret); +} + +static struct gpio_chip madera_gpio_chip = { + .label = "madera", + .owner = THIS_MODULE, + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .get_direction = madera_gpio_get_direction, + .direction_input = madera_gpio_direction_in, + .get = madera_gpio_get, + .direction_output = madera_gpio_direction_out, + .set = madera_gpio_set, + .set_config = gpiochip_generic_config, + .can_sleep = true, +}; + +static int madera_gpio_probe(struct platform_device *pdev) +{ + struct madera *madera = dev_get_drvdata(pdev->dev.parent); + struct madera_pdata *pdata = dev_get_platdata(madera->dev); + struct madera_gpio *madera_gpio; + int ret; + + madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio), + GFP_KERNEL); + if (!madera_gpio) + return -ENOMEM; + + madera_gpio->madera = madera; + + /* Construct suitable gpio_chip from the template in madera_gpio_chip */ + madera_gpio->gpio_chip = madera_gpio_chip; + madera_gpio->gpio_chip.parent = pdev->dev.parent; + + switch (madera->type) { + case CS47L35: + madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS; + break; + case CS47L85: + case WM1840: + madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS; + break; + case CS47L90: + case CS47L91: + madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS; + break; + default: + dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type); + return -EINVAL; + } + + /* We want to be usable on systems that don't use devicetree or acpi */ + if (pdata && pdata->gpio_base) + madera_gpio->gpio_chip.base = pdata->gpio_base; + else + madera_gpio->gpio_chip.base = -1; + + ret = devm_gpiochip_add_data(&pdev->dev, + &madera_gpio->gpio_chip, + madera_gpio); + if (ret < 0) { + dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + /* + * This is part of a composite MFD device which can only be used with + * the corresponding pinctrl driver. On all supported silicon the GPIO + * to pinctrl mapping is fixed in the silicon, so we register it + * explicitly instead of requiring a redundant gpio-ranges in the + * devicetree. + * In any case we also want to work on systems that don't use devicetree + * or acpi. + */ + ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl", + 0, 0, madera_gpio->gpio_chip.ngpio); + if (ret) { + dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret); + return ret; + } + + return 0; +} + +static struct platform_driver madera_gpio_driver = { + .driver = { + .name = "madera-gpio", + }, + .probe = madera_gpio_probe, +}; + +module_platform_driver(madera_gpio_driver); + +MODULE_SOFTDEP("pre: pinctrl-madera"); +MODULE_DESCRIPTION("GPIO interface for Madera codecs"); +MODULE_AUTHOR("Nariman Poushin "); +MODULE_AUTHOR("Richard Fitzgerald "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:madera-gpio"); -- cgit v1.2.3