From 2e0ae4bf137e282e825b27b02eb46f86c59d004e Mon Sep 17 00:00:00 2001 From: Andy Voltz Date: Mon, 15 Nov 2010 16:00:38 -0500 Subject: Bump Linux kernel to 2.6.32.25 --- drivers/hwmon/it87.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/hwmon/it87.c') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index a3749cb0f181..497476f637a9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -80,6 +80,13 @@ superio_inb(int reg) return inb(VAL); } +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + static int superio_inw(int reg) { int val; @@ -1036,6 +1043,21 @@ static int __init it87_find(unsigned short *address, sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); + /* + * The IT8720F has no VIN7 pin, so VCCH should always be + * routed internally to VIN7 with an internal divider. + * Curiously, there still is a configuration bit to control + * this, which means it can be set incorrectly. And even + * more curiously, many boards out there are improperly + * configured, even though the IT8720F datasheet claims + * that the internal routing of VCCH to VIN7 is the default + * setting. So we force the internal routing in this case. + */ + if (sio_data->type == it8720 && !(reg & (1 << 1))) { + reg |= (1 << 1); + superio_outb(IT87_SIO_PINX2_REG, reg); + pr_notice("it87: Routing internal VCCH to in7\n"); + } if (reg & (1 << 0)) pr_info("it87: in3 is VCC (+5V)\n"); if (reg & (1 << 1)) -- cgit v1.2.3