From f68d9320cd06fdec19735143b42e5197b63165b4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 26 Mar 2007 23:03:18 +0200 Subject: ide: revert "ide: fix drive side 80c cable check, take 2" for now "ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit fab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93) but we also need to fix master/slave IDENTIFY order (slave device should be probed first in order to make it release PDIAG- signal) and we should also check for pre-ATA3 slave devices (which may not release PDIAG- signal). [ Unfortunately the fact that IDE driver doesn't reset devices itself helps only a bit as it seems that some BIOS-es reset ATA devices after programming the chipset, some BIOS-es can be set to not probe/configure selected devices, there may be no BIOS in case of add-on cards etc. ] Since we are quite late in the release cycle and the required changes will affect a lot of systems just revert the fix for now. [ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ] Thanks goes out to Fernando Mitio Yamada for reporting the problem and patiently testing patches. Acked-by: Tejun Heo Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/ide/ide-iops.c') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bd513f5a2323..5523c52fee7a 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -583,8 +583,12 @@ u8 eighty_ninty_three (ide_drive_t *drive) if(!(drive->id->hw_config & 0x4000)) return 0; #endif /* CONFIG_IDEDMA_IVB */ - if (!(drive->id->hw_config & 0x2000)) - return 0; + /* + * FIXME: + * - change master/slave IDENTIFY order + * - force bit13 (80c cable present) check + * (unless the slave device is pre-ATA3) + */ return 1; } -- cgit v1.2.3