From 3a509bb11acded0dfebbfcc740d85e0774b0769a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 10 Sep 2010 16:49:47 -0300
Subject: [media] Re-write the s921 frontend

On our tests with Leadership ISDBT, the s921 frontend were not work. As its
design contained some weird things, it ended to be easier to just re-write
it, getting another frontend as an example (cx24123).

As the old s921 driver weren't used, there's no regression. Some info from
the old frontend were used as a way to double check the behavior that were
noticed on the USB dumps retrieved from Leadership driver.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/Kconfig       |   2 +-
 drivers/media/dvb/frontends/Makefile      |   1 -
 drivers/media/dvb/frontends/s921.c        | 548 ++++++++++++++++++++++++++++++
 drivers/media/dvb/frontends/s921.h        |  47 +++
 drivers/media/dvb/frontends/s921_core.c   | 216 ------------
 drivers/media/dvb/frontends/s921_core.h   | 114 -------
 drivers/media/dvb/frontends/s921_module.c | 192 -----------
 drivers/media/dvb/frontends/s921_module.h |  49 ---
 8 files changed, 596 insertions(+), 573 deletions(-)
 create mode 100644 drivers/media/dvb/frontends/s921.c
 create mode 100644 drivers/media/dvb/frontends/s921.h
 delete mode 100644 drivers/media/dvb/frontends/s921_core.c
 delete mode 100644 drivers/media/dvb/frontends/s921_core.h
 delete mode 100644 drivers/media/dvb/frontends/s921_module.c
 delete mode 100644 drivers/media/dvb/frontends/s921_module.h

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 96b27016670e..00dbf1e488b8 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -497,7 +497,7 @@ comment "ISDB-T (terrestrial) frontends"
 	depends on DVB_CORE
 
 config DVB_S921
-	tristate "Sharp S921 tuner"
+	tristate "Sharp S921 frontend"
 	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
 	help
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 9a31985c0dfb..48b9fd356711 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -5,7 +5,6 @@
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
 EXTRA_CFLAGS += -Idrivers/media/common/tuners/
 
-s921-objs := s921_module.o s921_core.o
 stb0899-objs = stb0899_drv.o stb0899_algo.o
 stv0900-objs = stv0900_core.o stv0900_sw.o
 au8522-objs = au8522_dig.o au8522_decoder.o
diff --git a/drivers/media/dvb/frontends/s921.c b/drivers/media/dvb/frontends/s921.c
new file mode 100644
index 000000000000..ca0103d5f148
--- /dev/null
+++ b/drivers/media/dvb/frontends/s921.c
@@ -0,0 +1,548 @@
+/*
+ *   Sharp VA3A5JZ921 One Seg Broadcast Module driver
+ *   This device is labeled as just S. 921 at the top of the frontend can
+ *
+ *   Copyright (C) 2009-2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   Developed for Leadership SBTVD 1seg device sold in Brazil
+ *
+ *   Frontend module based on cx24123 driver, getting some info from
+ *	the old s921 driver.
+ *
+ *   FIXME: Need to port to DVB v5.2 API
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "s921.h"
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+#define rc(args...)  do {						\
+	printk(KERN_ERR  "s921: " args);				\
+} while (0)
+
+#define dprintk(args...)						\
+	do {								\
+		if (debug) {						\
+			printk(KERN_DEBUG "s921: %s: ", __func__);	\
+			printk(args);					\
+		}							\
+	} while (0)
+
+struct s921_state {
+	struct i2c_adapter *i2c;
+	const struct s921_config *config;
+
+	struct dvb_frontend frontend;
+
+	/* The Demod can't easily provide these, we cache them */
+	u32 currentfreq;
+};
+
+/*
+ * Various tuner defaults need to be established for a given frequency kHz.
+ * fixme: The bounds on the bands do not match the doc in real life.
+ * fixme: Some of them have been moved, other might need adjustment.
+ */
+static struct s921_bandselect_val {
+	u32 freq_low;
+	u8  band_reg;
+} s921_bandselect[] = {
+	{         0, 0x7b },
+	{ 485140000, 0x5b },
+	{ 515140000, 0x3b },
+	{ 545140000, 0x1b },
+	{ 599140000, 0xfb },
+	{ 623140000, 0xdb },
+	{ 659140000, 0xbb },
+	{ 713140000, 0x9b },
+};
+
+struct regdata {
+	u8 reg;
+	u8 data;
+};
+
+static struct regdata s921_init[] = {
+	{ 0x01, 0x80 },		/* Probably, a reset sequence */
+	{ 0x01, 0x40 },
+	{ 0x01, 0x80 },
+	{ 0x01, 0x40 },
+
+	{ 0x02, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x01 },
+	{ 0x05, 0x00 },
+	{ 0x06, 0x00 },
+	{ 0x07, 0x00 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x00 },
+	{ 0x0a, 0x00 },
+	{ 0x0b, 0x5a },
+	{ 0x0c, 0x00 },
+	{ 0x0d, 0x00 },
+	{ 0x0f, 0x00 },
+	{ 0x13, 0x1b },
+	{ 0x14, 0x80 },
+	{ 0x15, 0x40 },
+	{ 0x17, 0x70 },
+	{ 0x18, 0x01 },
+	{ 0x19, 0x12 },
+	{ 0x1a, 0x01 },
+	{ 0x1b, 0x12 },
+	{ 0x1c, 0xa0 },
+	{ 0x1d, 0x00 },
+	{ 0x1e, 0x0a },
+	{ 0x1f, 0x08 },
+	{ 0x20, 0x40 },
+	{ 0x21, 0xff },
+	{ 0x22, 0x4c },
+	{ 0x23, 0x4e },
+	{ 0x24, 0x4c },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x00 },
+	{ 0x27, 0xf4 },
+	{ 0x28, 0x60 },
+	{ 0x29, 0x88 },
+	{ 0x2a, 0x40 },
+	{ 0x2b, 0x40 },
+	{ 0x2c, 0xff },
+	{ 0x2d, 0x00 },
+	{ 0x2e, 0xff },
+	{ 0x2f, 0x00 },
+	{ 0x30, 0x20 },
+	{ 0x31, 0x06 },
+	{ 0x32, 0x0c },
+	{ 0x34, 0x0f },
+	{ 0x37, 0xfe },
+	{ 0x38, 0x00 },
+	{ 0x39, 0x63 },
+	{ 0x3a, 0x10 },
+	{ 0x3b, 0x10 },
+	{ 0x47, 0x00 },
+	{ 0x49, 0xe5 },
+	{ 0x4b, 0x00 },
+	{ 0x50, 0xc0 },
+	{ 0x52, 0x20 },
+	{ 0x54, 0x5a },
+	{ 0x55, 0x5b },
+	{ 0x56, 0x40 },
+	{ 0x57, 0x70 },
+	{ 0x5c, 0x50 },
+	{ 0x5d, 0x00 },
+	{ 0x62, 0x17 },
+	{ 0x63, 0x2f },
+	{ 0x64, 0x6f },
+	{ 0x68, 0x00 },
+	{ 0x69, 0x89 },
+	{ 0x6a, 0x00 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x00 },
+	{ 0x6d, 0x00 },
+	{ 0x6e, 0x00 },
+	{ 0x70, 0x10 },
+	{ 0x71, 0x00 },
+	{ 0x75, 0x00 },
+	{ 0x76, 0x30 },
+	{ 0x77, 0x01 },
+	{ 0xaf, 0x00 },
+	{ 0xb0, 0xa0 },
+	{ 0xb2, 0x3d },
+	{ 0xb3, 0x25 },
+	{ 0xb4, 0x8b },
+	{ 0xb5, 0x4b },
+	{ 0xb6, 0x3f },
+	{ 0xb7, 0xff },
+	{ 0xb8, 0xff },
+	{ 0xb9, 0xfc },
+	{ 0xba, 0x00 },
+	{ 0xbb, 0x00 },
+	{ 0xbc, 0x00 },
+	{ 0xd0, 0x30 },
+	{ 0xe4, 0x84 },
+	{ 0xf0, 0x48 },
+	{ 0xf1, 0x19 },
+	{ 0xf2, 0x5a },
+	{ 0xf3, 0x8e },
+	{ 0xf4, 0x2d },
+	{ 0xf5, 0x07 },
+	{ 0xf6, 0x5a },
+	{ 0xf7, 0xba },
+	{ 0xf8, 0xd7 },
+};
+
+static struct regdata s921_prefreq[] = {
+	{ 0x47, 0x60 },
+	{ 0x68, 0x00 },
+	{ 0x69, 0x89 },
+	{ 0xf0, 0x48 },
+	{ 0xf1, 0x19 },
+};
+
+static struct regdata s921_postfreq[] = {
+	{ 0xf5, 0xae },
+	{ 0xf6, 0xb7 },
+	{ 0xf7, 0xba },
+	{ 0xf8, 0xd7 },
+	{ 0x68, 0x0a },
+	{ 0x69, 0x09 },
+};
+
+static int s921_i2c_writereg(struct s921_state *state,
+			     u8 i2c_addr, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = {
+		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
+	};
+	int rc;
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+	if (rc != 1) {
+		printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __func__, rc, reg, data);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
+				 struct regdata *rd, int size)
+{
+	int i, rc;
+
+	for (i = 0; i < size; i++) {
+		rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
+{
+	u8 val;
+	int rc;
+	struct i2c_msg msg[] = {
+		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+	};
+
+	rc = i2c_transfer(state->i2c, msg, 2);
+
+	if (rc != 2) {
+		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
+		return rc;
+	}
+
+	return val;
+}
+
+#define s921_readreg(state, reg) \
+	s921_i2c_readreg(state, state->config->demod_address, reg)
+#define s921_writereg(state, reg, val) \
+	s921_i2c_writereg(state, state->config->demod_address, reg, val)
+#define s921_writeregdata(state, regdata) \
+	s921_i2c_writeregdata(state, state->config->demod_address, \
+	regdata, ARRAY_SIZE(regdata))
+
+static int s921_pll_tune(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int band, rc, i;
+	unsigned long f_offset;
+	u8 f_switch;
+	u64 offset;
+
+	dprintk("frequency=%i\n", p->frequency);
+
+	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
+		if (p->frequency < s921_bandselect[band].freq_low)
+			break;
+	band--;
+
+	if (band < 0) {
+		rc("%s: frequency out of range\n", __func__);
+		return -EINVAL;
+	}
+
+	f_switch = s921_bandselect[band].band_reg;
+
+	offset = ((u64)p->frequency) * 258;
+	do_div(offset, 6000000);
+	f_offset = ((unsigned long)offset) + 2321;
+
+	rc = s921_writeregdata(state, s921_prefreq);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf4, f_switch);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writeregdata(state, s921_postfreq);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0 ; i < 6; i++) {
+		rc = s921_readreg(state, 0x80);
+		dprintk("status 0x80: %02x\n", rc);
+	}
+	rc = s921_writereg(state, 0x01, 0x40);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_readreg(state, 0x01);
+	dprintk("status 0x01: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x32);
+	dprintk("status 0x32: %02x\n", rc);
+
+	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);
+
+	return 0;
+}
+
+static int s921_initfe(struct dvb_frontend *fe)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	rc = s921_writeregdata(state, s921_init);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int regstatus, rc;
+
+	*status = 0;
+
+	rc = s921_readreg(state, 0x81);
+	if (rc < 0)
+		return rc;
+
+	regstatus = rc << 8;
+
+	rc = s921_readreg(state, 0x82);
+	if (rc < 0)
+		return rc;
+
+	regstatus |= rc;
+
+	dprintk("status = %04x\n", regstatus);
+
+	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
+	if ((regstatus & 0xff) == 0x40) {
+		*status = FE_HAS_SIGNAL  |
+			  FE_HAS_CARRIER |
+			  FE_HAS_VITERBI |
+			  FE_HAS_SYNC    |
+			  FE_HAS_LOCK;
+	} else if (regstatus & 0x40) {
+		/* This is close to Full Sync, but not enough to get useful info */
+		*status = FE_HAS_SIGNAL  |
+			  FE_HAS_CARRIER |
+			  FE_HAS_VITERBI |
+			  FE_HAS_SYNC;
+	}
+
+	return 0;
+}
+
+static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	fe_status_t	status;
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	/* FIXME: Use the proper register for it... 0x80? */
+	rc = s921_read_status(fe, &status);
+	if (rc < 0)
+		return rc;
+
+	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;
+
+	dprintk("strength = 0x%04x\n", *strength);
+
+	rc = s921_readreg(state, 0x01);
+	dprintk("status 0x01: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x32);
+	dprintk("status 0x32: %02x\n", rc);
+
+	return 0;
+}
+
+static int s921_set_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	/* FIXME: We don't know how to use non-auto mode */
+
+	rc = s921_pll_tune(fe, p);
+	if (rc < 0)
+		return rc;
+
+	state->currentfreq = p->frequency;
+
+	return 0;
+}
+
+static int s921_get_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+
+	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
+	p->frequency = state->currentfreq;
+
+	return 0;
+}
+
+static int s921_tune(struct dvb_frontend *fe,
+			struct dvb_frontend_parameters *params,
+			unsigned int mode_flags,
+			unsigned int *delay,
+			fe_status_t *status)
+{
+	int rc = 0;
+
+	dprintk("\n");
+
+	if (params != NULL)
+		rc = s921_set_frontend(fe, params);
+
+	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+		s921_read_status(fe, status);
+
+	return rc;
+}
+
+static int s921_get_algo(struct dvb_frontend *fe)
+{
+	return 1; /* FE_ALGO_HW */
+}
+
+static void s921_release(struct dvb_frontend *fe)
+{
+	struct s921_state *state = fe->demodulator_priv;
+
+	dprintk("\n");
+	kfree(state);
+}
+
+static struct dvb_frontend_ops s921_ops;
+
+struct dvb_frontend *s921_attach(const struct s921_config *config,
+				    struct i2c_adapter *i2c)
+{
+	/* allocate memory for the internal state */
+	struct s921_state *state =
+		kzalloc(sizeof(struct s921_state), GFP_KERNEL);
+
+	dprintk("\n");
+	if (state == NULL) {
+		rc("Unable to kzalloc\n");
+		goto rcor;
+	}
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &s921_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+
+rcor:
+	kfree(state);
+
+	return NULL;
+}
+EXPORT_SYMBOL(s921_attach);
+
+static struct dvb_frontend_ops s921_ops = {
+	/* Use dib8000 values per default */
+	.info = {
+		.name = "Sharp S921",
+		.type = FE_OFDM,
+		.frequency_min = 470000000,
+		/*
+		 * Max should be 770MHz instead, according with Sharp docs,
+		 * but Leadership doc says it works up to 806 MHz. This is
+		 * required to get channel 69, used in Brazil
+		 */
+		.frequency_max = 806000000,
+		.frequency_tolerance = 0,
+		 .caps = FE_CAN_INVERSION_AUTO |
+			 FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			 FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			 FE_CAN_QPSK     | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+			 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
+			 FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = s921_release,
+
+	.init = s921_initfe,
+	.set_frontend = s921_set_frontend,
+	.get_frontend = s921_get_frontend,
+	.read_status = s921_read_status,
+	.read_signal_strength = s921_read_signal_strength,
+	.tune = s921_tune,
+	.get_frontend_algo = s921_get_algo,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s921.h b/drivers/media/dvb/frontends/s921.h
new file mode 100644
index 000000000000..f220d8299c81
--- /dev/null
+++ b/drivers/media/dvb/frontends/s921.h
@@ -0,0 +1,47 @@
+/*
+ *   Sharp s921 driver
+ *
+ *   Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#ifndef S921_H
+#define S921_H
+
+#include <linux/dvb/frontend.h>
+
+struct s921_config {
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_S921) || (defined(CONFIG_DVB_S921_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *s921_attach(const struct s921_config *config,
+					   struct i2c_adapter *i2c);
+extern struct i2c_adapter *s921_get_tuner_i2c_adapter(struct dvb_frontend *);
+#else
+static inline struct dvb_frontend *s921_attach(
+	const struct s921_config *config, struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+static struct i2c_adapter *
+	s921_get_tuner_i2c_adapter(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* S921_H */
diff --git a/drivers/media/dvb/frontends/s921_core.c b/drivers/media/dvb/frontends/s921_core.c
deleted file mode 100644
index 974b52be9aea..000000000000
--- a/drivers/media/dvb/frontends/s921_core.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Driver for Sharp s921 driver
- *
- * Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "s921_core.h"
-
-static int s921_isdb_init(struct s921_isdb_t *dev);
-static int s921_isdb_set_parameters(struct s921_isdb_t *dev, struct s921_isdb_t_transmission_mode_params *params);
-static int s921_isdb_tune(struct s921_isdb_t *dev, struct s921_isdb_t_tune_params *params);
-static int s921_isdb_get_status(struct s921_isdb_t *dev, void *data);
-
-static u8 init_table[]={ 0x01, 0x40, 0x02, 0x00, 0x03, 0x40, 0x04, 0x01,
-			 0x05, 0x00, 0x06, 0x00, 0x07, 0x00, 0x08, 0x00,
-			 0x09, 0x00, 0x0a, 0x00, 0x0b, 0x5a, 0x0c, 0x00,
-			 0x0d, 0x00, 0x0f, 0x00, 0x13, 0x1b, 0x14, 0x80,
-			 0x15, 0x40, 0x17, 0x70, 0x18, 0x01, 0x19, 0x12,
-			 0x1a, 0x01, 0x1b, 0x12, 0x1c, 0xa0, 0x1d, 0x00,
-			 0x1e, 0x0a, 0x1f, 0x08, 0x20, 0x40, 0x21, 0xff,
-			 0x22, 0x4c, 0x23, 0x4e, 0x24, 0x4c, 0x25, 0x00,
-			 0x26, 0x00, 0x27, 0xf4, 0x28, 0x60, 0x29, 0x88,
-			 0x2a, 0x40, 0x2b, 0x40, 0x2c, 0xff, 0x2d, 0x00,
-			 0x2e, 0xff, 0x2f, 0x00, 0x30, 0x20, 0x31, 0x06,
-			 0x32, 0x0c, 0x34, 0x0f, 0x37, 0xfe, 0x38, 0x00,
-			 0x39, 0x63, 0x3a, 0x10, 0x3b, 0x10, 0x47, 0x00,
-			 0x49, 0xe5, 0x4b, 0x00, 0x50, 0xc0, 0x52, 0x20,
-			 0x54, 0x5a, 0x55, 0x5b, 0x56, 0x40, 0x57, 0x70,
-			 0x5c, 0x50, 0x5d, 0x00, 0x62, 0x17, 0x63, 0x2f,
-			 0x64, 0x6f, 0x68, 0x00, 0x69, 0x89, 0x6a, 0x00,
-			 0x6b, 0x00, 0x6c, 0x00, 0x6d, 0x00, 0x6e, 0x00,
-			 0x70, 0x00, 0x71, 0x00, 0x75, 0x00, 0x76, 0x30,
-			 0x77, 0x01, 0xaf, 0x00, 0xb0, 0xa0, 0xb2, 0x3d,
-			 0xb3, 0x25, 0xb4, 0x8b, 0xb5, 0x4b, 0xb6, 0x3f,
-			 0xb7, 0xff, 0xb8, 0xff, 0xb9, 0xfc, 0xba, 0x00,
-			 0xbb, 0x00, 0xbc, 0x00, 0xd0, 0x30, 0xe4, 0x84,
-			 0xf0, 0x48, 0xf1, 0x19, 0xf2, 0x5a, 0xf3, 0x8e,
-			 0xf4, 0x2d, 0xf5, 0x07, 0xf6, 0x5a, 0xf7, 0xba,
-			 0xf8, 0xd7 };
-
-static u8 c_table[]={ 0x58, 0x8a, 0x7b, 0x59, 0x8c, 0x7b, 0x5a, 0x8e, 0x5b,
-		      0x5b, 0x90, 0x5b, 0x5c, 0x92, 0x5b, 0x5d, 0x94, 0x5b,
-		      0x5e, 0x96, 0x5b, 0x5f, 0x98, 0x3b, 0x60, 0x9a, 0x3b,
-		      0x61, 0x9c, 0x3b, 0x62, 0x9e, 0x3b, 0x63, 0xa0, 0x3b,
-		      0x64, 0xa2, 0x1b, 0x65, 0xa4, 0x1b, 0x66, 0xa6, 0x1b,
-		      0x67, 0xa8, 0x1b, 0x68, 0xaa, 0x1b, 0x69, 0xac, 0x1b,
-		      0x6a, 0xae, 0x1b, 0x6b, 0xb0, 0x1b, 0x6c, 0xb2, 0x1b,
-		      0x6d, 0xb4, 0xfb, 0x6e, 0xb6, 0xfb, 0x6f, 0xb8, 0xfb,
-		      0x70, 0xba, 0xfb, 0x71, 0xbc, 0xdb, 0x72, 0xbe, 0xdb,
-		      0x73, 0xc0, 0xdb, 0x74, 0xc2, 0xdb, 0x75, 0xc4, 0xdb,
-		      0x76, 0xc6, 0xdb, 0x77, 0xc8, 0xbb, 0x78, 0xca, 0xbb,
-		      0x79, 0xcc, 0xbb, 0x7a, 0xce, 0xbb, 0x7b, 0xd0, 0xbb,
-		      0x7c, 0xd2, 0xbb, 0x7d, 0xd4, 0xbb, 0x7e, 0xd6, 0xbb,
-		      0x7f, 0xd8, 0xbb, 0x80, 0xda, 0x9b, 0x81, 0xdc, 0x9b,
-		      0x82, 0xde, 0x9b, 0x83, 0xe0, 0x9b, 0x84, 0xe2, 0x9b,
-		      0x85, 0xe4, 0x9b, 0x86, 0xe6, 0x9b, 0x87, 0xe8, 0x9b,
-		      0x88, 0xea, 0x9b, 0x89, 0xec, 0x9b };
-
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data) {
-	switch(cmd) {
-	case ISDB_T_CMD_INIT:
-		s921_isdb_init(dev);
-		break;
-	case ISDB_T_CMD_SET_PARAM:
-		s921_isdb_set_parameters(dev, data);
-		break;
-	case ISDB_T_CMD_TUNE:
-		s921_isdb_tune(dev, data);
-		break;
-	case ISDB_T_CMD_GET_STATUS:
-		s921_isdb_get_status(dev, data);
-		break;
-	default:
-		printk("unhandled command\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int s921_isdb_init(struct s921_isdb_t *dev) {
-	unsigned int i;
-	unsigned int ret;
-	printk("isdb_init\n");
-	for (i = 0; i < sizeof(init_table); i+=2) {
-		ret = dev->i2c_write(dev->priv_dev, init_table[i], init_table[i+1]);
-		if (ret != 0) {
-			printk("i2c write failed\n");
-			return ret;
-		}
-	}
-	return 0;
-}
-
-static int s921_isdb_set_parameters(struct s921_isdb_t *dev, struct s921_isdb_t_transmission_mode_params *params) {
-
-	int ret;
-	/* auto is sufficient for now, lateron this should be reflected in an extra interface */
-
-
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb0, 0xa0); //mod_b2);
-	ret = dev->i2c_write(dev->priv_dev, 0xb2, 0x3d); //mod_b2);
-
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb3, 0x25); //mod_b3);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb4, 0x8b); //mod_b4);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb5, 0x4b); //mod_b5);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb6, 0x3f); //mod_b6);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb7, 0x3f); //mod_b7);
-	if (ret < 0)
-		return -EINVAL;
-
-	return E_OK;
-}
-
-static int s921_isdb_tune(struct s921_isdb_t *dev, struct s921_isdb_t_tune_params *params) {
-
-	int ret;
-	int index;
-
-	index = (params->frequency - 473143000)/6000000;
-
-	if (index > 48) {
-		return -EINVAL;
-	}
-
-	dev->i2c_write(dev->priv_dev, 0x47, 0x60);
-
-	ret = dev->i2c_write(dev->priv_dev, 0x68, 0x00);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x69, 0x89);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf0, 0x48);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf1, 0x19);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf2, c_table[index*3]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf3, c_table[index*3+1]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf4, c_table[index*3+2]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf5, 0xae);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf6, 0xb7);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf7, 0xba);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf8, 0xd7);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x68, 0x0a);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x69, 0x09);
-	if (ret < 0)
-		return -EINVAL;
-
-	dev->i2c_write(dev->priv_dev, 0x01, 0x40);
-	return 0;
-}
-
-static int s921_isdb_get_status(struct s921_isdb_t *dev, void *data) {
-	unsigned int *ret = (unsigned int*)data;
-	u8 ifagc_dt;
-	u8 rfagc_dt;
-
-	mdelay(10);
-	ifagc_dt = dev->i2c_read(dev->priv_dev, 0x81);
-	rfagc_dt = dev->i2c_read(dev->priv_dev, 0x82);
-	if (rfagc_dt == 0x40) {
-		*ret = 1;
-	}
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/s921_core.h b/drivers/media/dvb/frontends/s921_core.h
deleted file mode 100644
index de2f10a44e72..000000000000
--- a/drivers/media/dvb/frontends/s921_core.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef _S921_CORE_H
-#define _S921_CORE_H
-//#define u8 unsigned int
-//#define u32 unsigned int
-
-
-
-//#define EINVAL -1
-#define E_OK 0
-
-struct s921_isdb_t {
-	void *priv_dev;
-	int (*i2c_write)(void *dev, u8 reg, u8 val);
-	int (*i2c_read)(void *dev, u8 reg);
-};
-
-#define ISDB_T_CMD_INIT       0
-#define ISDB_T_CMD_SET_PARAM  1
-#define ISDB_T_CMD_TUNE       2
-#define ISDB_T_CMD_GET_STATUS 3
-
-struct s921_isdb_t_tune_params {
-	u32 frequency;
-};
-
-struct s921_isdb_t_status {
-};
-
-struct s921_isdb_t_transmission_mode_params {
-	u8 mode;
-	u8 layer_a_mode;
-#define ISDB_T_LA_MODE_1 0
-#define ISDB_T_LA_MODE_2 1
-#define ISDB_T_LA_MODE_3 2
-	u8 layer_a_carrier_modulation;
-#define ISDB_T_LA_CM_DQPSK 0
-#define ISDB_T_LA_CM_QPSK  1
-#define ISDB_T_LA_CM_16QAM 2
-#define ISDB_T_LA_CM_64QAM 3
-#define ISDB_T_LA_CM_NOLAYER 4
-	u8 layer_a_code_rate;
-#define ISDB_T_LA_CR_1_2   0
-#define ISDB_T_LA_CR_2_3   1
-#define ISDB_T_LA_CR_3_4   2
-#define ISDB_T_LA_CR_5_6   4
-#define ISDB_T_LA_CR_7_8   8
-#define ISDB_T_LA_CR_NOLAYER   16
-	u8 layer_a_time_interleave;
-#define ISDB_T_LA_TI_0  0
-#define ISDB_T_LA_TI_1  1
-#define ISDB_T_LA_TI_2  2
-#define ISDB_T_LA_TI_4  4
-#define ISDB_T_LA_TI_8  8
-#define ISDB_T_LA_TI_16 16
-#define ISDB_T_LA_TI_32 32
-	u8 layer_a_nseg;
-
-	u8 layer_b_mode;
-#define ISDB_T_LB_MODE_1 0
-#define ISDB_T_LB_MODE_2 1
-#define ISDB_T_LB_MODE_3 2
-	u8 layer_b_carrier_modulation;
-#define ISDB_T_LB_CM_DQPSK 0
-#define ISDB_T_LB_CM_QPSK  1
-#define ISDB_T_LB_CM_16QAM 2
-#define ISDB_T_LB_CM_64QAM 3
-#define ISDB_T_LB_CM_NOLAYER 4
-	u8 layer_b_code_rate;
-#define ISDB_T_LB_CR_1_2   0
-#define ISDB_T_LB_CR_2_3   1
-#define ISDB_T_LB_CR_3_4   2
-#define ISDB_T_LB_CR_5_6   4
-#define ISDB_T_LB_CR_7_8   8
-#define ISDB_T_LB_CR_NOLAYER   16
-	u8 layer_b_time_interleave;
-#define ISDB_T_LB_TI_0  0
-#define ISDB_T_LB_TI_1  1
-#define ISDB_T_LB_TI_2  2
-#define ISDB_T_LB_TI_4  4
-#define ISDB_T_LB_TI_8  8
-#define ISDB_T_LB_TI_16 16
-#define ISDB_T_LB_TI_32 32
-	u8 layer_b_nseg;
-
-	u8 layer_c_mode;
-#define ISDB_T_LC_MODE_1 0
-#define ISDB_T_LC_MODE_2 1
-#define ISDB_T_LC_MODE_3 2
-	u8 layer_c_carrier_modulation;
-#define ISDB_T_LC_CM_DQPSK 0
-#define ISDB_T_LC_CM_QPSK  1
-#define ISDB_T_LC_CM_16QAM 2
-#define ISDB_T_LC_CM_64QAM 3
-#define ISDB_T_LC_CM_NOLAYER 4
-	u8 layer_c_code_rate;
-#define ISDB_T_LC_CR_1_2   0
-#define ISDB_T_LC_CR_2_3   1
-#define ISDB_T_LC_CR_3_4   2
-#define ISDB_T_LC_CR_5_6   4
-#define ISDB_T_LC_CR_7_8   8
-#define ISDB_T_LC_CR_NOLAYER   16
-	u8 layer_c_time_interleave;
-#define ISDB_T_LC_TI_0  0
-#define ISDB_T_LC_TI_1  1
-#define ISDB_T_LC_TI_2  2
-#define ISDB_T_LC_TI_4  4
-#define ISDB_T_LC_TI_8  8
-#define ISDB_T_LC_TI_16 16
-#define ISDB_T_LC_TI_32 32
-	u8 layer_c_nseg;
-};
-
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data);
-#endif
diff --git a/drivers/media/dvb/frontends/s921_module.c b/drivers/media/dvb/frontends/s921_module.c
deleted file mode 100644
index 0eefff61cc50..000000000000
--- a/drivers/media/dvb/frontends/s921_module.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Driver for Sharp s921 driver
- *
- * Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- * All rights reserved.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "s921_module.h"
-#include "s921_core.h"
-
-static  unsigned int debug = 0;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,"s921 debugging (default off)");
-
-#define dprintk(fmt, args...) if (debug) do {\
-			printk("s921 debug: " fmt, ##args); } while (0)
-
-struct s921_state
-{
-	struct dvb_frontend frontend;
-	fe_modulation_t current_modulation;
-	__u32 snr;
-	__u32 current_frequency;
-	__u8 addr;
-	struct s921_isdb_t dev;
-	struct i2c_adapter *i2c;
-};
-
-static int s921_set_parameters(struct dvb_frontend *fe, struct dvb_frontend_parameters *param) {
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	struct s921_isdb_t_transmission_mode_params params;
-	struct s921_isdb_t_tune_params tune_params;
-
-	tune_params.frequency = param->frequency;
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_SET_PARAM, &params);
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_TUNE, &tune_params);
-	mdelay(100);
-	return 0;
-}
-
-static int s921_init(struct dvb_frontend *fe) {
-	printk("s921 init\n");
-	return 0;
-}
-
-static int s921_sleep(struct dvb_frontend *fe) {
-	printk("s921 sleep\n");
-	return 0;
-}
-
-static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	unsigned int ret;
-	mdelay(5);
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_GET_STATUS, &ret);
-	*status = 0;
-
-	printk("status: %02x\n", ret);
-	if (ret == 1) {
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_SIGNAL;
-	}
-
-	return 0;
-}
-
-static int s921_read_ber(struct dvb_frontend *fe, __u32 *ber)
-{
-	dprintk("read ber\n");
-	return 0;
-}
-
-static int s921_read_snr(struct dvb_frontend *fe, __u16 *snr)
-{
-	dprintk("read snr\n");
-	return 0;
-}
-
-static int s921_read_ucblocks(struct dvb_frontend *fe, __u32 *ucblocks)
-{
-	dprintk("read ucblocks\n");
-	return 0;
-}
-
-static void s921_release(struct dvb_frontend *fe)
-{
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops demod_s921={
-	.info = {
-		.name			= "SHARP S921",
-		.type			= FE_OFDM,
-		.frequency_min		= 473143000,
-		.frequency_max		= 767143000,
-		.frequency_stepsize	=   6000000,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-	.init = s921_init,
-	.sleep = s921_sleep,
-	.set_frontend = s921_set_parameters,
-	.read_snr = s921_read_snr,
-	.read_ber = s921_read_ber,
-	.read_status = s921_read_status,
-	.read_ucblocks = s921_read_ucblocks,
-	.release = s921_release,
-};
-
-static int s921_write(void *dev, u8 reg, u8 val) {
-	struct s921_state *state = dev;
-	char buf[2]={reg,val};
-	int err;
-	struct i2c_msg i2cmsgs = {
-		.addr = state->addr,
-		.flags = 0,
-		.len = 2,
-		.buf = buf
-	};
-
-	if((err = i2c_transfer(state->i2c, &i2cmsgs, 1))<0) {
-		printk("%s i2c_transfer error %d\n", __func__, err);
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int s921_read(void *dev, u8 reg) {
-	struct s921_state *state = dev;
-	u8 b1;
-	int ret;
-	struct i2c_msg msg[2] = { { .addr = state->addr,
-				    .flags = 0,
-				    .buf = &reg, .len = 1 },
-				  { .addr = state->addr,
-				    .flags = I2C_M_RD,
-				    .buf = &b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2)
-		return ret;
-	return b1;
-}
-
-struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c)
-{
-
-	struct s921_state *state;
-	state = kzalloc(sizeof(struct s921_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->addr = config->i2c_address;
-	state->i2c = i2c;
-	state->dev.i2c_write = &s921_write;
-	state->dev.i2c_read = &s921_read;
-	state->dev.priv_dev = state;
-
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_INIT, NULL);
-
-	memcpy(&state->frontend.ops, &demod_s921, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-EXPORT_SYMBOL_GPL(s921_attach);
-MODULE_AUTHOR("Markus Rechberger <mrechberger@empiatech.com>");
-MODULE_DESCRIPTION("Sharp S921 ISDB-T 1Seg");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s921_module.h b/drivers/media/dvb/frontends/s921_module.h
deleted file mode 100644
index 78660424ba95..000000000000
--- a/drivers/media/dvb/frontends/s921_module.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  Driver for DVB-T s921 demodulator
- *
- *  Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef S921_MODULE_H
-#define S921_MODULE_H
-
-#include <linux/dvb/frontend.h>
-#include "s921_core.h"
-
-int s921_isdb_init(struct s921_isdb_t *dev);
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data);
-
-struct s921_config
-{
-	/* demodulator's I2C address */
-	u8 i2c_address;
-};
-
-#if defined(CONFIG_DVB_S921) || (defined(CONFIG_DVB_S921_MODULE) && defined(MODULE))
-extern struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_S921 */
-
-#endif /* S921_H */
-- 
cgit v1.2.3


From ca3dfd6a6f8364c1d51e548adb4564702f1141e9 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 10 Sep 2010 17:29:14 -0300
Subject: [media] em28xx: Add support for Leadership ISDB-T

This device uses an em2874B + Sharp 921 One Seg frontend.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/Kconfig        |  1 +
 drivers/media/video/em28xx/em28xx-cards.c | 66 +++++++++++++++++++++++++++++--
 drivers/media/video/em28xx/em28xx-dvb.c   | 16 ++++++++
 drivers/media/video/em28xx/em28xx.h       |  2 +
 4 files changed, 81 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 66aefd6eef55..8d38c5fdece0 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -37,6 +37,7 @@ config VIDEO_EM28XX_DVB
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	select DVB_S921 if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index f7e9168157a5..24caa8512ba8 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -268,6 +268,20 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
 };
 
 
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq leadership_digital[] = {
+	{EM2874_R80_GPIO,	0x70,	0xff,	10},
+	{	-1,		-1,	-1,	-1},
+};
+
+static struct em28xx_reg_seq leadership_reset[] = {
+	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
+	{EM2874_R80_GPIO,	0xb0,	0xff,	10},
+	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
+	{	-1,		-1,	-1,	-1},
+};
+
+
 /*
  *  Board definitions
  */
@@ -1224,6 +1238,19 @@ struct em28xx_board em28xx_boards[] = {
 			.vmux     = SAA7115_COMPOSITE0,
 		} },
 	},
+
+	[EM2874_LEADERSHIP_ISDBT] = {
+		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
+				  EM28XX_I2C_CLK_WAIT_ENABLE |
+				  EM28XX_I2C_FREQ_100_KHZ,
+		.xclk		= EM28XX_XCLK_FREQUENCY_10MHZ,
+		.name		= "EM2874 Leadership ISDBT",
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_gpio     = leadership_reset,
+		.dvb_gpio       = leadership_digital,
+		.has_dvb	= 1,
+	},
+
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
 		.name         = "MSI DigiVox A/D",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -1754,6 +1781,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2868),
 			.driver_info = EM2820_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2875),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0xe300),
 			.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
 	{ USB_DEVICE(0xeb1a, 0xe303),
@@ -1873,6 +1902,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
+	{0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
 };
 
 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -2430,8 +2460,36 @@ void em28xx_card_setup(struct em28xx *dev)
 			dev->board.is_webcam = 0;
 		else
 			dev->progressive = 1;
-	} else
-		em28xx_set_model(dev);
+	}
+
+	if (!dev->board.is_webcam) {
+		switch (dev->model) {
+		case EM2820_BOARD_UNKNOWN:
+		case EM2800_BOARD_UNKNOWN:
+		/*
+		 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+		 *
+		 * This occurs because they share identical USB vendor and
+		 * product IDs.
+		 *
+		 * What we do here is look up the EEPROM hash of the K-WORLD
+		 * and if it is found then we decide that we do not have
+		 * a DIGIVOX and reset the device to the K-WORLD instead.
+		 *
+		 * This solution is only valid if they do not share eeprom
+		 * hash identities which has not been determined as yet.
+		 */
+		if (em28xx_hint_board(dev) < 0)
+			em28xx_errdev("Board not discovered\n");
+		else {
+			em28xx_set_model(dev);
+			em28xx_pre_card_setup(dev);
+		}
+		break;
+		default:
+			em28xx_set_model(dev);
+		}
+	}
 
 	em28xx_info("Identified as %s (card=%d)\n",
 		    dev->board.name, dev->model);
@@ -2749,8 +2807,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	em28xx_pre_card_setup(dev);
 
 	if (!dev->board.is_em2800) {
-		/* Sets I2C speed to 100 KHz */
-		retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+		/* Resets I2C speed */
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req failed!"
 				      " retval [%d]\n",
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3ac8d3025fea..c7c04bf712aa 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -37,6 +37,7 @@
 #include "mt352_priv.h" /* FIXME */
 #include "tda1002x.h"
 #include "tda18271.h"
+#include "s921.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -245,6 +246,10 @@ static struct lgdt3305_config em2870_lgdt3304_dev = {
 	.qam_if_khz         = 4000,
 };
 
+static struct s921_config sharp_isdbt = {
+	.demod_address = 0x30 >> 1
+};
+
 static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -481,6 +486,7 @@ static int dvb_init(struct em28xx *dev)
 
 	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
+		printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
 		return 0;
 	}
 
@@ -496,6 +502,16 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
+	case EM2874_LEADERSHIP_ISDBT:
+		dvb->frontend = dvb_attach(s921_attach,
+				&sharp_isdbt, &dev->i2c_adap);
+
+		if (!dvb->frontend) {
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		break;
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6a75e6a4fc21..6a48043a7b92 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -117,6 +117,8 @@
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
 #define EM2870_BOARD_KWORLD_A340		  76
+#define EM2874_LEADERSHIP_ISDBT			  77
+
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
-- 
cgit v1.2.3


From b9ede79ada766eec535e1230970bd885489d5990 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Sep 2010 20:52:43 -0300
Subject: [media] add a driver for mb86a20s

This adds the trivial bits to mb86a20s. As the driver won't touch
at the channel/layer parameters, this may not be enough for
receiving all channels, especially ISDB-Tsb, but the driver worked
properly for receiving video channels on my tests.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/Kconfig    |   8 +
 drivers/media/dvb/frontends/Makefile   |   1 +
 drivers/media/dvb/frontends/mb86a20s.c | 584 +++++++++++++++++++++++++++++++++
 drivers/media/dvb/frontends/mb86a20s.h |  51 +++
 4 files changed, 644 insertions(+)
 create mode 100644 drivers/media/dvb/frontends/mb86a20s.c
 create mode 100644 drivers/media/dvb/frontends/mb86a20s.h

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 00dbf1e488b8..ef3e43a03199 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -512,6 +512,14 @@ config DVB_DIB8000
 	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
 	  Say Y when you want to support this frontend.
 
+config DVB_MB86A20S
+	tristate "Fujitsu mb86a20s"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
 comment "Digital terrestrial only tuners/PLL"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 48b9fd356711..b1d9525aa7e3 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -81,4 +81,5 @@ obj-$(CONFIG_DVB_ISL6423) += isl6423.o
 obj-$(CONFIG_DVB_EC100) += ec100.o
 obj-$(CONFIG_DVB_DS3000) += ds3000.o
 obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
+obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o
 obj-$(CONFIG_DVB_IX2505V) += ix2505v.o
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
new file mode 100644
index 000000000000..1e6bec6aa0f9
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -0,0 +1,584 @@
+/*
+ *   Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   FIXME: Need to port to DVB v5.2 API
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "mb86a20s.h"
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+#define rc(args...)  do {						\
+	printk(KERN_ERR  "mb86a20s: " args);				\
+} while (0)
+
+#define dprintk(args...)						\
+	do {								\
+		if (debug) {						\
+			printk(KERN_DEBUG "mb86a20s: %s: ", __func__);	\
+			printk(args);					\
+		}							\
+	} while (0)
+
+struct mb86a20s_state {
+	struct i2c_adapter *i2c;
+	const struct mb86a20s_config *config;
+
+	struct dvb_frontend frontend;
+
+
+
+
+};
+
+struct regdata {
+	u8 reg;
+	u8 data;
+};
+
+/*
+ * Initialization sequence: Use whatevere default values that PV SBTVD
+ * does on its initialisation, obtained via USB snoop
+ */
+static struct regdata mb86a20s_init[] = {
+	{ 0x70, 0x0f },
+	{ 0x70, 0xff },
+	{ 0x08, 0x01 },
+	{ 0x09, 0x3e },
+	{ 0x50, 0xd1 },
+	{ 0x51, 0x22 },
+	{ 0x39, 0x01 },
+	{ 0x71, 0x00 },
+	{ 0x28, 0x2a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0xff },
+	{ 0x2b, 0x80 },
+	{ 0x28, 0x20 },
+	{ 0x29, 0x33 },
+	{ 0x2a, 0xdf },
+	{ 0x2b, 0xa9 },
+	{ 0x3b, 0x21 },
+	{ 0x3c, 0x3a },
+	{ 0x01, 0x0d },
+	{ 0x04, 0x08 },
+	{ 0x05, 0x05 },
+	{ 0x04, 0x0e },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x0f },
+	{ 0x05, 0x14 },
+	{ 0x04, 0x0b },
+	{ 0x05, 0x8c },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x01 },
+	{ 0x05, 0x07 },
+	{ 0x04, 0x02 },
+	{ 0x05, 0x0f },
+	{ 0x04, 0x03 },
+	{ 0x05, 0xa0 },
+	{ 0x04, 0x09 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x0a },
+	{ 0x05, 0xff },
+	{ 0x04, 0x27 },
+	{ 0x05, 0x64 },
+	{ 0x04, 0x28 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x1e },
+	{ 0x05, 0xff },
+	{ 0x04, 0x29 },
+	{ 0x05, 0x0a },
+	{ 0x04, 0x32 },
+	{ 0x05, 0x0a },
+	{ 0x04, 0x14 },
+	{ 0x05, 0x02 },
+	{ 0x04, 0x04 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x05 },
+	{ 0x05, 0x22 },
+	{ 0x04, 0x06 },
+	{ 0x05, 0x0e },
+	{ 0x04, 0x07 },
+	{ 0x05, 0xd8 },
+	{ 0x04, 0x12 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x13 },
+	{ 0x05, 0xff },
+	{ 0x52, 0x01 },
+	{ 0x50, 0xa7 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xa8 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xa9 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xaa },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xab },
+	{ 0x51, 0xff },
+	{ 0x50, 0xac },
+	{ 0x51, 0xff },
+	{ 0x50, 0xad },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xae },
+	{ 0x51, 0xff },
+	{ 0x50, 0xaf },
+	{ 0x51, 0xff },
+	{ 0x5e, 0x07 },
+	{ 0x50, 0xdc },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xdd },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xde },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xdf },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xe0 },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xe1 },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xb0 },
+	{ 0x51, 0x07 },
+	{ 0x50, 0xb2 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb3 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb4 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb5 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb6 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb7 },
+	{ 0x51, 0xff },
+	{ 0x50, 0x50 },
+	{ 0x51, 0x02 },
+	{ 0x50, 0x51 },
+	{ 0x51, 0x04 },
+	{ 0x45, 0x04 },
+	{ 0x48, 0x04 },
+	{ 0x50, 0xd5 },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xd6 },
+	{ 0x51, 0x1f },
+	{ 0x50, 0xd2 },
+	{ 0x51, 0x03 },
+	{ 0x50, 0xd7 },
+	{ 0x51, 0x3f },
+	{ 0x1c, 0x01 },
+	{ 0x28, 0x06 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x03 },
+	{ 0x28, 0x07 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0d },
+	{ 0x28, 0x08 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x02 },
+	{ 0x28, 0x09 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x01 },
+	{ 0x28, 0x0a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x21 },
+	{ 0x28, 0x0b },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x29 },
+	{ 0x28, 0x0c },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x16 },
+	{ 0x28, 0x0d },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x31 },
+	{ 0x28, 0x0e },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0e },
+	{ 0x28, 0x0f },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x4e },
+	{ 0x28, 0x10 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x46 },
+	{ 0x28, 0x11 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0f },
+	{ 0x28, 0x12 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x56 },
+	{ 0x28, 0x13 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x35 },
+	{ 0x28, 0x14 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0xbe },
+	{ 0x28, 0x15 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0x84 },
+	{ 0x28, 0x16 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x03 },
+	{ 0x2b, 0xee },
+	{ 0x28, 0x17 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x98 },
+	{ 0x28, 0x18 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x9f },
+	{ 0x28, 0x19 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x07 },
+	{ 0x2b, 0xb2 },
+	{ 0x28, 0x1a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x06 },
+	{ 0x2b, 0xc2 },
+	{ 0x28, 0x1b },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x07 },
+	{ 0x2b, 0x4a },
+	{ 0x28, 0x1c },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0xbc },
+	{ 0x28, 0x1d },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x04 },
+	{ 0x2b, 0xba },
+	{ 0x28, 0x1e },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x06 },
+	{ 0x2b, 0x14 },
+	{ 0x50, 0x1e },
+	{ 0x51, 0x5d },
+	{ 0x50, 0x22 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x23 },
+	{ 0x51, 0xc8 },
+	{ 0x50, 0x24 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x25 },
+	{ 0x51, 0xf0 },
+	{ 0x50, 0x26 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x27 },
+	{ 0x51, 0xc3 },
+	{ 0x50, 0x39 },
+	{ 0x51, 0x02 },
+	{ 0x50, 0xd5 },
+	{ 0x51, 0x01 },
+	{ 0xd0, 0x00 },
+};
+
+static struct regdata mb86a20s_reset_reception[] = {
+	{ 0x70, 0xf0 },
+	{ 0x70, 0xff },
+	{ 0x08, 0x01 },
+	{ 0x08, 0x00 },
+};
+
+static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
+			     u8 i2c_addr, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = {
+		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
+	};
+	int rc;
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+	if (rc != 1) {
+		printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __func__, rc, reg, data);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state,
+				     u8 i2c_addr, struct regdata *rd, int size)
+{
+	int i, rc;
+
+	for (i = 0; i < size; i++) {
+		rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg,
+					   rd[i].data);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,
+				u8 i2c_addr, u8 reg)
+{
+	u8 val;
+	int rc;
+	struct i2c_msg msg[] = {
+		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+	};
+
+	rc = i2c_transfer(state->i2c, msg, 2);
+
+	if (rc != 2) {
+		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
+		return rc;
+	}
+
+	return val;
+}
+
+#define mb86a20s_readreg(state, reg) \
+	mb86a20s_i2c_readreg(state, state->config->demod_address, reg)
+#define mb86a20s_writereg(state, reg, val) \
+	mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val)
+#define mb86a20s_writeregdata(state, regdata) \
+	mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
+	regdata, ARRAY_SIZE(regdata))
+
+static int mb86a20s_initfe(struct dvb_frontend *fe)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	/* Initialize the frontend */
+	rc = mb86a20s_writeregdata(state, mb86a20s_init);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	unsigned rf_max, rf_min, rf;
+	u8	 val;
+
+	dprintk("\n");
+
+	/* Does a binary search to get RF strength */
+	rf_max = 0xfff;
+	rf_min = 0;
+	do {
+		rf = (rf_max + rf_min) / 2;
+		mb86a20s_writereg(state, 0x04, 0x1f);
+		mb86a20s_writereg(state, 0x05, rf >> 8);
+		mb86a20s_writereg(state, 0x04, 0x20);
+		mb86a20s_writereg(state, 0x04, rf);
+
+		val = mb86a20s_readreg(state, 0x02);
+		if (val & 0x08)
+			rf_min = (rf_max + rf_min) / 2;
+		else
+			rf_max = (rf_max + rf_min) / 2;
+		if (rf_max - rf_min < 4) {
+			*strength = (((rf_max + rf_min) / 2) * 65535) / 4095;
+			break;
+		}
+	} while (1);
+
+	dprintk("signal strength = %d\n", *strength);
+
+	return 0;
+}
+
+static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	u8 val;
+
+	dprintk("\n");
+	*status = 0;
+
+	val = mb86a20s_readreg(state, 0x0a) & 0xf;
+
+	if (val >= 2)
+		*status |= FE_HAS_SIGNAL;
+
+	if (val >= 4)
+		*status |= FE_HAS_CARRIER;
+
+	if (val >= 5)
+		*status |= FE_HAS_VITERBI;
+
+	if (val >= 7)
+		*status |= FE_HAS_SYNC;
+
+	if (val >= 8)				/* Maybe 9? */
+		*status |= FE_HAS_LOCK;
+
+	dprintk("val = %d, status = 0x%02x\n", val, *status);
+
+	return 0;
+}
+
+static int mb86a20s_set_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	fe->ops.tuner_ops.set_params(fe, p);
+	rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
+
+	return rc;
+}
+
+static int mb86a20s_get_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+
+	/* FIXME: For now, it does nothing */
+
+	fe->dtv_property_cache.bandwidth_hz = 6000000;
+	fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO;
+	fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO;
+	fe->dtv_property_cache.isdbt_partial_reception = 0;
+
+	return 0;
+}
+
+static int mb86a20s_tune(struct dvb_frontend *fe,
+			struct dvb_frontend_parameters *params,
+			unsigned int mode_flags,
+			unsigned int *delay,
+			fe_status_t *status)
+{
+	int rc = 0;
+
+	dprintk("\n");
+
+	if (params != NULL)
+		rc = mb86a20s_set_frontend(fe, params);
+
+	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+		mb86a20s_read_status(fe, status);
+
+	return rc;
+}
+
+static void mb86a20s_release(struct dvb_frontend *fe)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+
+	dprintk("\n");
+
+	kfree(state);
+}
+
+static struct dvb_frontend_ops mb86a20s_ops;
+
+struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
+				    struct i2c_adapter *i2c)
+{
+	u8	rev;
+
+	/* allocate memory for the internal state */
+	struct mb86a20s_state *state =
+		kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL);
+
+	dprintk("\n");
+	if (state == NULL) {
+		rc("Unable to kzalloc\n");
+		goto error;
+	}
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &mb86a20s_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	/* Check if it is a mb86a20s frontend */
+	rev = mb86a20s_readreg(state, 0);
+
+	if (rev == 0x13) {
+		printk(KERN_INFO "Detected a Fujitsu mb86a20s frontend\n");
+	} else {
+		printk(KERN_ERR "Frontend revision %d is unknown - aborting.\n",
+		       rev);
+		goto error;
+	}
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(mb86a20s_attach);
+
+static struct dvb_frontend_ops mb86a20s_ops = {
+	/* Use dib8000 values per default */
+	.info = {
+		.name = "Fujitsu mb86A20s",
+		.type = FE_OFDM,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_RECOVER |
+			FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK     | FE_CAN_QAM_16  | FE_CAN_QAM_64 |
+			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO    | FE_CAN_HIERARCHY_AUTO,
+		/* Actually, those values depend on the used tuner */
+		.frequency_min = 45000000,
+		.frequency_max = 864000000,
+		.frequency_stepsize = 62500,
+	},
+
+	.release = mb86a20s_release,
+
+	.init = mb86a20s_initfe,
+	.set_frontend = mb86a20s_set_frontend,
+	.get_frontend = mb86a20s_get_frontend,
+	.read_status = mb86a20s_read_status,
+	.read_signal_strength = mb86a20s_read_signal_strength,
+	.tune = mb86a20s_tune,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mb86a20s.h b/drivers/media/dvb/frontends/mb86a20s.h
new file mode 100644
index 000000000000..e3461983a831
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a20s.h
@@ -0,0 +1,51 @@
+/*
+ *   Fujitsu mb86a20s driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#ifndef MB86A20S_H
+#define MB86A20S_H
+
+#include <linux/dvb/frontend.h>
+
+/**
+ * struct mb86a20s_config - Define the per-device attributes of the frontend
+ *
+ * @demod_address:	the demodulator's i2c address
+ */
+
+struct mb86a20s_config {
+	u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_MB86A20S) || (defined(CONFIG_DVB_MB86A20S_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
+					   struct i2c_adapter *i2c);
+extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *);
+#else
+static inline struct dvb_frontend *mb86a20s_attach(
+	const struct mb86a20s_config *config, struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+static struct i2c_adapter *
+	mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* MB86A20S */
-- 
cgit v1.2.3


From 9417bc6dd9de85944501f8f4ce8dd0e64135ca82 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 26 Sep 2010 20:44:31 -0300
Subject: [media] Add analog support for Pixelvied Hybrid SBTVD

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-avcore.c |  1 +
 drivers/media/video/cx231xx/cx231xx-cards.c  | 41 ++++++++++++++++++++++++++--
 drivers/media/video/cx231xx/cx231xx-core.c   |  3 ++
 drivers/media/video/cx231xx/cx231xx.h        |  1 +
 4 files changed, 44 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index cf50fafa8abb..d52955c21007 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -354,6 +354,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
 	case CX231XX_BOARD_CNXT_VIDEO_GRABBER:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_HAUPPAUGE_USBLIVE2:
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
 			while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
 						FLD_PWRDN_ENABLE_PLL)) {
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 2c78d188bb06..7dc7a89d8961 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -395,6 +395,43 @@ struct cx231xx_board cx231xx_boards[] = {
 			.gpio = 0,
 		} },
 	},
+	[CX231XX_BOARD_PV_PLAYTV_USB_HYBRID] = {
+		.name = "Pixelview PlayTV USB Hybrid",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.demod_xfer_mode = 0,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x00,	/* According with PV cxPolaris.inf file */
+		.tuner_sif_gpio = -1,
+		.tuner_scl_gpio = -1,
+		.tuner_sda_gpio = -1,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 2,
+		.demod_i2c_master = 1,
+		.has_dvb = 0,		/* FIXME: need driver for mb86a20s */
+		.demod_addr = 0x10,
+		.norm = V4L2_STD_PAL_M,
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = 0,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = 0,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = 0,
+		} },
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -402,8 +439,6 @@ const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 struct usb_device_id cx231xx_id_table[] = {
 	{USB_DEVICE(0x0572, 0x5A3C),
 	 .driver_info = CX231XX_BOARD_UNKNOWN},
-	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
-	 .driver_info = CX231XX_BOARD_UNKNOWN},
 	{USB_DEVICE(0x0572, 0x58A2),
 	 .driver_info = CX231XX_BOARD_CNXT_CARRAERA},
 	{USB_DEVICE(0x0572, 0x58A1),
@@ -424,6 +459,8 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
 	{USB_DEVICE(0x2040, 0xc200),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USBLIVE2},
+	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000, 0x4001),
+	 .driver_info = CX231XX_BOARD_PV_PLAYTV_USB_HYBRID},
 	{},
 };
 
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index 4af46fca9b0a..5664bdf7785d 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -719,6 +719,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 			break;
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 			break;
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
@@ -740,6 +741,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
@@ -1381,6 +1383,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	case CX231XX_BOARD_CNXT_RDE_253S:
 	case CX231XX_BOARD_CNXT_RDU_253S:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 		break;
 	default:
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index d067df9b81e7..8a7d0a4aaab6 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -62,6 +62,7 @@
 #define CX231XX_BOARD_CNXT_RDU_250	7
 #define CX231XX_BOARD_HAUPPAUGE_EXETER  8
 #define CX231XX_BOARD_HAUPPAUGE_USBLIVE2 9
+#define CX231XX_BOARD_PV_PLAYTV_USB_HYBRID 10
 
 /* Limits minimum and default number of buffers */
 #define CX231XX_MIN_BUF                 4
-- 
cgit v1.2.3


From ede676c72d0b18f1c15300f7874370e771489a1c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Sep 2010 23:44:27 -0300
Subject: [media] add digital support for PV SBTVD hybrid

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/Kconfig         |  2 ++
 drivers/media/video/cx231xx/cx231xx-cards.c |  2 +-
 drivers/media/video/cx231xx/cx231xx-dvb.c   | 39 +++++++++++++++++++++++++++++
 3 files changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index bb04914983fd..bad836f77758 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -30,6 +30,8 @@ config VIDEO_CX231XX_DVB
 	depends on VIDEO_CX231XX && DVB_CORE
 	select VIDEOBUF_DVB
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_NXP18271 if !DVB_FE_CUSTOMISE
+	select DVB_MB86A20S if !DVB_FE_CUSTOMISE
 
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 7dc7a89d8961..4d0ab458fa64 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -410,7 +410,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.gpio_pin_status_mask = 0x4001000,
 		.tuner_i2c_master = 2,
 		.demod_i2c_master = 1,
-		.has_dvb = 0,		/* FIXME: need driver for mb86a20s */
+		.has_dvb = 1,
 		.demod_addr = 0x10,
 		.norm = V4L2_STD_PAL_M,
 		.input = {{
diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c
index 5feb3ee640d9..b55e7e0bc245 100644
--- a/drivers/media/video/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/video/cx231xx/cx231xx-dvb.c
@@ -33,6 +33,7 @@
 #include "tda18271.h"
 #include "s5h1411.h"
 #include "lgdt3305.h"
+#include "mb86a20s.h"
 
 MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
 MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
@@ -88,6 +89,11 @@ static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
 		      .if_lvl = 1, .rfagc_top = 0x37, },
 };
 
+static struct tda18271_std_map mb86a20s_tda18271_config = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 7, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config cnxt_rde253s_tunerconfig = {
 	.std_map = &cnxt_rde253s_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
@@ -135,6 +141,16 @@ static struct tda18271_config hcw_tda18271_config = {
 	.gate    = TDA18271_GATE_DIGITAL,
 };
 
+static const struct mb86a20s_config pv_mb86a20s_config = {
+	.demod_address = 0x10,
+};
+
+static struct tda18271_config pv_tda18271_config = {
+	.std_map = &mb86a20s_tda18271_config,
+	.gate    = TDA18271_GATE_DIGITAL,
+	.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
+};
+
 static inline void print_err_status(struct cx231xx *dev, int packet, int status)
 {
 	char *errmsg = "Unknown";
@@ -687,6 +703,29 @@ static int dvb_init(struct cx231xx *dev)
 			   &hcw_tda18271_config);
 		break;
 
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+
+		printk(KERN_INFO "%s: looking for demod on i2c bus: %d\n",
+		       __func__, i2c_adapter_id(&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap));
+
+		dev->dvb->frontend = dvb_attach(mb86a20s_attach,
+						&pv_mb86a20s_config,
+						&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
+
+		if (dev->dvb->frontend == NULL) {
+			printk(DRIVER_NAME
+			       ": Failed to attach mb86a20s demod\n");
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		/* define general-purpose callback pointer */
+		dvb->frontend->callback = cx231xx_tuner_callback;
+
+		dvb_attach(tda18271_attach, dev->dvb->frontend,
+			   0x60, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
+			   &pv_tda18271_config);
+		break;
 
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
-- 
cgit v1.2.3


From 55fa288deca4b17e539ba49a9b0d0ed474afa6f8 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 29 Sep 2010 11:07:08 -0300
Subject: [media] cx231xx: use callback to set agc on PixelView

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-cards.c | 11 +++++++++++
 drivers/media/video/cx231xx/cx231xx-core.c  |  1 -
 2 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 4d0ab458fa64..400447fbf7fb 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -34,6 +34,7 @@
 #include <media/cx25840.h>
 #include "dvb-usb-ids.h"
 #include "xc5000.h"
+#include "tda18271.h"
 
 #include "cx231xx.h"
 
@@ -490,6 +491,16 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
 					       1);
 			msleep(10);
 		}
+	} else if (dev->tuner_type == TUNER_NXP_TDA18271) {
+		switch (command) {
+		case TDA18271_CALLBACK_CMD_AGC_ENABLE:
+			if (dev->model == CX231XX_BOARD_PV_PLAYTV_USB_HYBRID)
+				rc = cx231xx_set_agc_analog_digital_mux_select(dev, arg);
+			break;
+		default:
+			rc = -EINVAL;
+			break;
+		}
 	}
 	return rc;
 }
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index 5664bdf7785d..d6028c92b6f2 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -719,7 +719,6 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 			break;
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
-		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 			break;
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
-- 
cgit v1.2.3


From 7572f9c5575c721f43b575a71fda1ecd896e0327 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 3 Oct 2010 16:48:49 -0300
Subject: [media] mb86a20s: add support for serial streams

By comparing the traffic between Pixelview (cx23102-based and Kworld
(saa7134-based), the only difference is at register 0xd5. After some
tests, It seems that it is used to change mode between serial and parallel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/mb86a20s.c    | 18 +++++++++++++-----
 drivers/media/dvb/frontends/mb86a20s.h    |  1 +
 drivers/media/video/cx231xx/cx231xx-dvb.c |  1 +
 3 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
index 1e6bec6aa0f9..b4de8f12df27 100644
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -43,10 +43,6 @@ struct mb86a20s_state {
 	const struct mb86a20s_config *config;
 
 	struct dvb_frontend frontend;
-
-
-
-
 };
 
 struct regdata {
@@ -175,7 +171,7 @@ static struct regdata mb86a20s_init[] = {
 	{ 0x45, 0x04 },
 	{ 0x48, 0x04 },
 	{ 0x50, 0xd5 },
-	{ 0x51, 0x01 },
+	{ 0x51, 0x01 },		/* Serial */
 	{ 0x50, 0xd6 },
 	{ 0x51, 0x1f },
 	{ 0x50, 0xd2 },
@@ -376,6 +372,7 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 {
 	struct mb86a20s_state *state = fe->demodulator_priv;
 	int rc;
+	u8  regD5 = 1;
 
 	dprintk("\n");
 
@@ -384,6 +381,17 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 	if (rc < 0)
 		return rc;
 
+	if (!state->config->is_serial) {
+		regD5 &= ~1;
+
+		rc = mb86a20s_writereg(state, 0x50, 0xd5);
+		if (rc < 0)
+			return rc;
+		rc = mb86a20s_writereg(state, 0x51, regD5);
+		if (rc < 0)
+			return rc;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/mb86a20s.h b/drivers/media/dvb/frontends/mb86a20s.h
index e3461983a831..bf22e77888b9 100644
--- a/drivers/media/dvb/frontends/mb86a20s.h
+++ b/drivers/media/dvb/frontends/mb86a20s.h
@@ -26,6 +26,7 @@
 
 struct mb86a20s_config {
 	u8 demod_address;
+	bool is_serial;
 };
 
 #if defined(CONFIG_DVB_MB86A20S) || (defined(CONFIG_DVB_MB86A20S_MODULE) \
diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c
index b55e7e0bc245..fe59a1c3f064 100644
--- a/drivers/media/video/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/video/cx231xx/cx231xx-dvb.c
@@ -143,6 +143,7 @@ static struct tda18271_config hcw_tda18271_config = {
 
 static const struct mb86a20s_config pv_mb86a20s_config = {
 	.demod_address = 0x10,
+	.is_serial = true,
 };
 
 static struct tda18271_config pv_tda18271_config = {
-- 
cgit v1.2.3


From 68541cdaadecbc280cd50122f11fdbb249a2ae29 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 3 Oct 2010 05:27:59 -0300
Subject: [media] Add support for Kworld SBTVD board

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/mb86a20s.c      |  23 ++++++
 drivers/media/video/saa7134/saa7134-cards.c | 109 ++++++++++++++++++++++++++++
 drivers/media/video/saa7134/saa7134.h       |   1 +
 3 files changed, 133 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
index b4de8f12df27..d3ad3e75a35a 100644
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -376,6 +376,9 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 
 	dprintk("\n");
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
 	/* Initialize the frontend */
 	rc = mb86a20s_writeregdata(state, mb86a20s_init);
 	if (rc < 0)
@@ -392,6 +395,9 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 			return rc;
 	}
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
 	return 0;
 }
 
@@ -403,6 +409,9 @@ static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 
 	dprintk("\n");
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
 	/* Does a binary search to get RF strength */
 	rf_max = 0xfff;
 	rf_min = 0;
@@ -426,6 +435,9 @@ static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 
 	dprintk("signal strength = %d\n", *strength);
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
 	return 0;
 }
 
@@ -437,7 +449,11 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
 	dprintk("\n");
 	*status = 0;
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
 	val = mb86a20s_readreg(state, 0x0a) & 0xf;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
 
 	if (val >= 2)
 		*status |= FE_HAS_SIGNAL;
@@ -467,8 +483,15 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe,
 
 	dprintk("\n");
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
 	fe->ops.tuner_ops.set_params(fe, p);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
 	rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
 
 	return rc;
 }
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 1d4d0a49ea52..58c8c03fd8f7 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5176,6 +5176,47 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = 2,
 		},
 	},
+	[SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = {
+		.name           = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_NXP_TDA18271,	/* TUNER_PHILIPS_TDA8290 */
+		.radio_type     = UNSET,
+		.tuner_addr     = 0x60,
+		.radio_addr	= ADDR_UNSET,
+		.gpiomask       = 0x8e054000,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.inputs = { {
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = TV,
+			.tv     = 1,
+#if 0	/* FIXME */
+		}, {
+			.name   = name_comp1,
+			.vmux   = 3,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+		}, {
+			.name   = name_svideo,
+			.vmux   = 8,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+#endif
+		} },
+#if 0
+		.radio = {
+			.name   = name_radio,
+			.vmux   = 1,
+			.amux   = LINE1,
+			.gpio   = 0x100,
+		},
+#endif
+		.mute = {
+			.name = name_mute,
+			.vmux = 0,
+			.amux = TV,
+		},
+	},
 	[SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS] = {
 		.name           = "Avermedia AVerTV GO 007 FM Plus",
 		.audio_clock    = 0x00187de7,
@@ -6612,6 +6653,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x17de,
 		.subdevice    = 0x7128,
 		.driver_data  = SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x17de,
+		.subdevice    = 0xb136,
+		.driver_data  = SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG,
 	}, {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -6831,6 +6878,23 @@ static inline int saa7134_tda18271_hvr11x0_toggle_agc(struct saa7134_dev *dev,
 	return 0;
 }
 
+static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev,
+						  enum tda18271_mode mode)
+{
+	/* toggle AGC switch through GPIO 27 */
+	switch (mode) {
+	case TDA18271_ANALOG:
+		saa7134_set_gpio(dev, 27, 0);
+		break;
+	case TDA18271_DIGITAL:
+		saa7134_set_gpio(dev, 27, 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 					  int command, int arg)
 {
@@ -6843,6 +6907,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 		case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 			ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
 			break;
+		case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+			ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg);
+			break;
 		default:
 			break;
 		}
@@ -6863,6 +6930,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 	case SAA7134_BOARD_AVERMEDIA_M733A:
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -7541,6 +7609,47 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 				       dev->name);
 		break;
 	}
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+	{
+		struct i2c_msg msg = { .addr = 0x4b, .flags = 0 };
+		int i;
+		static u8 buffer[][2] = {
+			{0x30, 0x31},
+			{0xff, 0x00},
+			{0x41, 0x03},
+			{0x41, 0x1a},
+			{0xff, 0x02},
+			{0x34, 0x00},
+			{0x45, 0x97},
+			{0x45, 0xc1},
+		};
+
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x0000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x0000);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
+
+		/*
+		 * FIXME: identify what device is at addr 0x4b and what means
+		 * this initialization
+		 */
+		for (i = 0; i < ARRAY_SIZE(buffer); i++) {
+			msg.buf = &buffer[i][0];
+			msg.len = ARRAY_SIZE(buffer[0]);
+			if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+				printk(KERN_WARNING
+				       "%s: Unable to enable tuner(%i).\n",
+				       dev->name, i);
+		}
+		break;
+	}
 	} /* switch() */
 
 	/* initialize tuner */
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d3b6a196e5dc..4e37b8bfb6fa 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -305,6 +305,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_BEHOLD_A7             179
 #define SAA7134_BOARD_AVERMEDIA_M733A       180
 #define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181
+#define SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG 182
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
-- 
cgit v1.2.3


From f0551efc77b0f34a93a14d2bf96051612e352a39 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 3 Oct 2010 07:01:26 -0300
Subject: [media] Add DVB support for SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-cards.c | 23 +++++-----
 drivers/media/video/saa7134/saa7134-dvb.c   | 69 +++++++++++++++++++++++++++++
 2 files changed, 81 insertions(+), 11 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 58c8c03fd8f7..ff23e6ebdde4 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5179,12 +5179,23 @@ struct saa7134_board saa7134_boards[] = {
 	[SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = {
 		.name           = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid",
 		.audio_clock    = 0x00187de7,
+#if 0
+	/*
+	 * FIXME: Analog mode doesn't work, if digital is enabled. The proper
+	 * fix is to use tda8290 driver, but Kworld seems to use an
+	 * unsupported version of tda8295.
+	 */
 		.tuner_type     = TUNER_NXP_TDA18271,	/* TUNER_PHILIPS_TDA8290 */
-		.radio_type     = UNSET,
 		.tuner_addr     = 0x60,
+#else
+		.tuner_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+#endif
+		.radio_type     = UNSET,
 		.radio_addr	= ADDR_UNSET,
 		.gpiomask       = 0x8e054000,
 		.mpeg           = SAA7134_MPEG_DVB,
+		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
 		.inputs = { {
 			.name   = name_tv,
 			.vmux   = 1,
@@ -7623,16 +7634,6 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 			{0x45, 0x97},
 			{0x45, 0xc1},
 		};
-
-		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x0000);
-		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
-		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x0000);
-		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
-		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
-		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
-		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
-		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
-		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000);
 		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
 		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
 
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index beb95e21d109..3315a48a848b 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -52,6 +52,7 @@
 #include "tda18271.h"
 #include "lgdt3305.h"
 #include "tda8290.h"
+#include "mb86a20s.h"
 
 #include "zl10353.h"
 
@@ -228,6 +229,20 @@ static struct mt352_config avermedia_xc3028_mt352_dev = {
 	.demod_init      = mt352_avermedia_xc3028_init,
 };
 
+static struct tda18271_std_map mb86a20s_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 7, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config kworld_tda18271_config = {
+	.std_map = &mb86a20s_tda18271_std_map,
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
+static const struct mb86a20s_config kworld_mb86a20s_config = {
+	.demod_address = 0x10,
+};
+
 /* ==================================================================
  * tda1004x based DVB-T cards, helper functions
  */
@@ -608,6 +623,37 @@ static struct tda827x_config tda827x_cfg_2_sw42 = {
 
 /* ------------------------------------------------------------------ */
 
+static int __kworld_sbtvd_i2c_gate_ctrl(struct saa7134_dev *dev, int enable)
+{
+	unsigned char initmsg[] = {0x45, 0x97};
+	unsigned char msg_enable[] = {0x45, 0xc1};
+	unsigned char msg_disable[] = {0x45, 0x81};
+	struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
+
+	if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+		wprintk("could not access the I2C gate\n");
+		return -EIO;
+	}
+	if (enable)
+		msg.buf = msg_enable;
+	else
+		msg.buf = msg_disable;
+	if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+		wprintk("could not access the I2C gate\n");
+		return -EIO;
+	}
+	msleep(20);
+	return 0;
+}
+static int kworld_sbtvd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+
+	return __kworld_sbtvd_i2c_gate_ctrl(dev, enable);
+}
+
+/* ------------------------------------------------------------------ */
+
 static struct tda1004x_config tda827x_lifeview_config = {
 	.demod_address = 0x08,
 	.invert        = 1,
@@ -1613,6 +1659,29 @@ static int dvb_init(struct saa7134_dev *dev)
 				   &dtv1000s_tda18271_config);
 		}
 		break;
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+		__kworld_sbtvd_i2c_gate_ctrl(dev, 0);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000);
+		msleep(20);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000);
+		msleep(20);
+		fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+					       &kworld_mb86a20s_config,
+					       &dev->i2c_adap);
+		__kworld_sbtvd_i2c_gate_ctrl(dev, 1);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_adap,
+				   &kworld_tda18271_config);
+			/*
+			 * Only after success, it can initialize the gate, otherwise
+			 * an OOPS will hit, due to kfree(fe0->dvb.frontend)
+			 */
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_i2c_gate_ctrl;
+		}
+		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");
 		break;
-- 
cgit v1.2.3


From 9ab66912e0cd671fbea1b99e8a37d11b14d50baf Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 23 Oct 2010 13:28:33 -0300
Subject: [media] cx231xx: Add a driver for I2C-based IR

Although cx231xx has a very good IR support, already supported by
mceusb driver, some designs decided to add a separate I2C
microcontroller chip in order to handle IR.

Due to that, add a glue to ir-kbd-i2c is needed, in order to support
those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/Kconfig         |  13 +++
 drivers/media/video/cx231xx/Makefile        |   5 +-
 drivers/media/video/cx231xx/cx231xx-cards.c |   5 ++
 drivers/media/video/cx231xx/cx231xx-core.c  |   2 +-
 drivers/media/video/cx231xx/cx231xx-input.c | 122 ++++++++++++++++++++++++++++
 drivers/media/video/cx231xx/cx231xx.h       |  32 +++++++-
 6 files changed, 174 insertions(+), 5 deletions(-)
 create mode 100644 drivers/media/video/cx231xx/cx231xx-input.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index bad836f77758..c37eac114024 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -14,6 +14,19 @@ config VIDEO_CX231XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx231xx
 
+config VIDEO_CX231XX_RC
+	bool "Conexant cx231xx Remote Controller additional support"
+	depends on VIDEO_IR
+	depends on VIDEO_CX231XX
+	default y
+	---help---
+	  cx231xx hardware has a builtin RX/TX support. However, a few
+	  designs opted to not use it, but, instead, some other hardware.
+	  This module enables the usage of those other hardware, like the
+	  ones used with ISDB-T boards.
+
+	  On most cases, all you need for IR is mceusb module.
+
 config VIDEO_CX231XX_ALSA
 	tristate "Conexant Cx231xx ALSA audio module"
 	depends on VIDEO_CX231XX && SND
diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile
index a6bc4cc54677..2c2484355449 100644
--- a/drivers/media/video/cx231xx/Makefile
+++ b/drivers/media/video/cx231xx/Makefile
@@ -1,5 +1,6 @@
-cx231xx-objs     := cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o \
-		    cx231xx-avcore.o cx231xx-417.o cx231xx-pcb-cfg.o cx231xx-vbi.o
+cx231xx-y += cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o
+cx231xx-y += cx231xx-avcore.o cx231xx-417.o cx231xx-pcb-cfg.o cx231xx-vbi.o
+cx231xx-$(CONFIG_VIDEO_CX231XX_RC) += cx231xx-input.o
 
 cx231xx-alsa-objs := cx231xx-audio.o
 
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 400447fbf7fb..0a06fcac9db9 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -663,8 +663,11 @@ void cx231xx_release_resources(struct cx231xx *dev)
 
 	cx231xx_remove_from_devlist(dev);
 
+	/* Release I2C buses */
 	cx231xx_dev_uninit(dev);
 
+	cx231xx_ir_exit(dev);
+
 	usb_put_dev(dev->udev);
 
 	/* Mark device as unused */
@@ -782,6 +785,8 @@ static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev,
 		goto fail_reg_devices;
 	}
 
+	cx231xx_ir_init(dev);
+
 	cx231xx_init_extension(dev);
 
 	return 0;
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index d6028c92b6f2..44d124c2fc35 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -1289,7 +1289,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	/* Internal Master 3 Bus */
 	dev->i2c_bus[2].nr = 2;
 	dev->i2c_bus[2].dev = dev;
-	dev->i2c_bus[2].i2c_period = I2C_SPEED_400K;	/* 400kHz */
+	dev->i2c_bus[2].i2c_period = I2C_SPEED_100K;	/* 100kHz */
 	dev->i2c_bus[2].i2c_nostop = 0;
 	dev->i2c_bus[2].i2c_reserve = 0;
 
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
new file mode 100644
index 000000000000..6725244c400c
--- /dev/null
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -0,0 +1,122 @@
+/*
+ *   cx231xx IR glue driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ *   Polaris (cx231xx) has its support for IR's with a design close to MCE.
+ *   however, a few designs are using an external I2C chip for IR, instead
+ *   of using the one provided by the chip.
+ *   This driver provides support for those extra devices
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include "cx231xx.h"
+#include <linux/usb.h>
+#include <linux/slab.h>
+
+#define MODULE_NAME "cx231xx-input"
+
+static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
+			 u32 *ir_raw)
+{
+	u8	cmd;
+
+		/* poll IR chip */
+	if (1 != i2c_master_recv(ir->c, &cmd, 1))
+		return -EIO;
+
+	/* it seems that 0xFE indicates that a button is still hold
+	   down, while 0xff indicates that no button is hold
+	   down. 0xfe sequences are sometimes interrupted by 0xFF */
+
+	if (cmd == 0xff)
+		return 0;
+
+	dev_dbg(&ir->input->dev, "scancode = %02x\n", cmd);
+
+	*ir_key = cmd;
+	*ir_raw = cmd;
+	return 1;
+}
+
+int cx231xx_ir_init(struct cx231xx *dev)
+{
+	struct input_dev *input_dev;
+	struct i2c_board_info info;
+	int rc;
+	u8 ir_i2c_bus;
+
+	dev_dbg(&dev->udev->dev, "%s\n", __func__);
+
+	/* Only initialize if a rc keycode map is defined */
+	if (!cx231xx_boards[dev->model].rc_map)
+		return -ENODEV;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	request_module("ir-kbd-i2c");
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&dev->ir.init_data, 0, sizeof(dev->ir.init_data));
+
+	dev->ir.input_dev = input_dev;
+	dev->ir.init_data.name = cx231xx_boards[dev->model].name;
+	dev->ir.props.priv = dev;
+	dev->ir.props.allowed_protos = IR_TYPE_NEC;
+	snprintf(dev->ir.name, sizeof(dev->ir.name),
+		 "cx231xx IR (%s)", cx231xx_boards[dev->model].name);
+	usb_make_path(dev->udev, dev->ir.phys, sizeof(dev->ir.phys));
+	strlcat(dev->ir.phys, "/input0", sizeof(dev->ir.phys));
+
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+	info.platform_data = &dev->ir.init_data;
+
+	input_dev->name = dev->ir.name;
+	input_dev->phys = dev->ir.phys;
+	input_dev->dev.parent = &dev->udev->dev;
+	input_dev->id.bustype = BUS_USB;
+	input_dev->id.version = 1;
+	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+	/*
+	 * Board-dependent values
+	 *
+	 * For now, there's just one type of hardware design using
+	 * an i2c device.
+	 */
+	dev->ir.init_data.get_key = get_key_isdbt;
+	dev->ir.init_data.ir_codes = cx231xx_boards[dev->model].rc_map;
+	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
+	dev->ir.props.scanmask = 0xff;
+	info.addr = 0x30;
+
+	rc = ir_input_register(input_dev, cx231xx_boards[dev->model].rc_map,
+			       &dev->ir.props, MODULE_NAME);
+	if (rc < 0)
+		return rc;
+
+	/* Load and bind ir-kbd-i2c */
+	ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
+	i2c_new_device(&dev->i2c_bus[ir_i2c_bus].i2c_adap, &info);
+
+	return rc;
+}
+
+void cx231xx_ir_exit(struct cx231xx *dev)
+{
+	if (dev->ir.input_dev) {
+		ir_input_unregister(dev->ir.input_dev);
+		dev->ir.input_dev = NULL;
+	}
+}
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index 8a7d0a4aaab6..a09cef43d98d 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -35,6 +35,7 @@
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
 #include <media/ir-core.h>
+#include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dvb.h>
 
 #include "cx231xx-reg.h"
@@ -345,6 +346,10 @@ struct cx231xx_board {
 	/* i2c masters */
 	u8 tuner_i2c_master;
 	u8 demod_i2c_master;
+	u8 ir_i2c_master;
+
+	/* for devices with I2C chips for IR */
+	char *rc_map;
 
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
@@ -597,6 +602,17 @@ struct cx231xx_tsport {
 	void                       *port_priv;
 };
 
+struct cx231xx_ir_t {
+	struct input_dev *input_dev;
+	char name[40];
+	char phys[32];
+
+	struct ir_dev_props props;
+
+	/* I2C keyboard data */
+	struct IR_i2c_init_data    init_data;
+};
+
 /* main device struct */
 struct cx231xx {
 	/* generic device properties */
@@ -606,6 +622,9 @@ struct cx231xx {
 
 	struct cx231xx_board board;
 
+	/* For I2C IR support */
+	struct cx231xx_ir_t ir;
+
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int vbi_stream_on:1;	/* Locks streams for VBI */
 	unsigned int has_audio_class:1;
@@ -617,8 +636,6 @@ struct cx231xx {
 	struct v4l2_subdev *sd_cx25840;
 	struct v4l2_subdev *sd_tuner;
 
-	struct cx231xx_IR *ir;
-
 	struct work_struct wq_trigger;		/* Trigger to start/stop audio for alsa module */
 	atomic_t	   stream_started;	/* stream should be running if true */
 
@@ -955,6 +972,17 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg);
 extern int cx231xx_417_register(struct cx231xx *dev);
 extern void cx231xx_417_unregister(struct cx231xx *dev);
 
+/* cx23885-input.c                                             */
+
+#if defined(CONFIG_VIDEO_CX231XX_RC)
+int cx231xx_ir_init(struct cx231xx *dev);
+void cx231xx_ir_exit(struct cx231xx *dev);
+#else
+#define cx231xx_ir_init(dev)	(0)
+#define cx231xx_ir_exit(dev)	(0)
+#endif
+
+
 /* printk macros */
 
 #define cx231xx_err(fmt, arg...) do {\
-- 
cgit v1.2.3


From 1bc25f7d6c0f353d3c73252048fe03a3d8f0e6b8 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 23 Oct 2010 13:35:58 -0300
Subject: [media] cx231xx: Add IR support for Pixelview Hybrid SBTVD

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-cards.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 0a06fcac9db9..83772eb8e391 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -411,6 +411,8 @@ struct cx231xx_board cx231xx_boards[] = {
 		.gpio_pin_status_mask = 0x4001000,
 		.tuner_i2c_master = 2,
 		.demod_i2c_master = 1,
+		.ir_i2c_master = 2,
+		.rc_map = RC_MAP_PIXELVIEW_NEW,
 		.has_dvb = 1,
 		.demod_addr = 0x10,
 		.norm = V4L2_STD_PAL_M,
-- 
cgit v1.2.3


From c429e7b62a54bf34c1995b45faeaeb84104f1705 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 25 Oct 2010 23:44:25 -0300
Subject: [media] drivers/media: Removed unnecessary KERN_<level>s from dprintk
 uses

Converted if (debug >= 2) printk(KERN_DEBUG... to if debug >= 2) dprintk(...)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/max2165.c         | 10 ++++------
 drivers/media/dvb/frontends/atbm8830.c        |  8 +++-----
 drivers/media/dvb/frontends/lgs8gxx.c         | 11 ++++-------
 drivers/media/video/saa7134/saa7134-input.c   |  2 +-
 drivers/media/video/saa7134/saa7134-tvaudio.c | 12 ++++++------
 5 files changed, 18 insertions(+), 25 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c
index 937e4b00d7ee..9883617b7862 100644
--- a/drivers/media/common/tuners/max2165.c
+++ b/drivers/media/common/tuners/max2165.c
@@ -52,13 +52,12 @@ static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
 	msg.addr = priv->config->i2c_address;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -EIO : 0;
@@ -78,14 +77,13 @@ static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+		dprintk("%s: reg=0x%02X, data=0x%02X\n",
 			__func__, reg, b1[0]);
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
index 43aac2f85c2e..1539ea1f81ac 100644
--- a/drivers/media/dvb/frontends/atbm8830.c
+++ b/drivers/media/dvb/frontends/atbm8830.c
@@ -50,8 +50,7 @@ static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
 	msg2.addr = dev_addr;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1)
@@ -77,8 +76,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%04x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
@@ -88,7 +86,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	*p_data = buf2[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+		dprintk("%s: reg=0x%04X, data=0x%02X\n",
 			__func__, reg, buf2[0]);
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
index 0fcddc4569d2..1172b54689f8 100644
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/drivers/media/dvb/frontends/lgs8gxx.c
@@ -60,13 +60,12 @@ static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
 		msg.addr += 0x02;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -1 : 0;
@@ -91,15 +90,13 @@ static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -1;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, b1[0]);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]);
 	return 0;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 46d31dfca7a3..b6c682f0acec 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -972,7 +972,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		   an existing device. Weird...
 		   REVISIT: might no longer be needed */
 		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
-		dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+		dprintk("probe 0x%02x @ %s: %s\n",
 			msg_msi.addr, dev->i2c_adap.name,
 			(1 == rc) ? "yes" : "no");
 		break;
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 3e7d2fd1688f..57e646bb48b3 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -550,16 +550,16 @@ static int tvaudio_thread(void *data)
 		} else if (0 != dev->last_carrier) {
 			/* no carrier -- try last detected one as fallback */
 			carrier = dev->last_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [last detected]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [last detected]\n",
+				carrier/1000, carrier%1000);
 
 		} else {
 			/* no carrier + no fallback -- use default */
 			carrier = default_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [default]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [default]\n",
+				carrier/1000, carrier%1000);
 		}
 		tvaudio_setcarrier(dev,carrier,carrier);
 		dev->automute = 0;
-- 
cgit v1.2.3


From ea7c681e899bda3fceb37815d63d201c3b4be920 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@laptop.org>
Date: Wed, 27 Oct 2010 10:55:00 -0300
Subject: [media] cafe_ccic: fix colorspace corruption on resume

If you suspend and resume during video capture, the video colours
are corrupted on resume. This is because the sensor is being unconditionally
powered off during the resume path.

Only power down during resume if the camera is not in use, and correctly
reconfigure the sensor during resume.
Fixes http://dev.laptop.org/ticket/10190

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 0dfff50891e4..789087cd6a9c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -859,8 +859,6 @@ static int cafe_cam_configure(struct cafe_camera *cam)
 	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret;
 
-	if (cam->state != S_IDLE)
-		return -EINVAL;
 	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
 	ret = sensor_call(cam, core, init, 0);
 	if (ret == 0)
@@ -2196,12 +2194,13 @@ static int cafe_pci_resume(struct pci_dev *pdev)
 		return ret;
 	}
 	cafe_ctlr_init(cam);
-	cafe_ctlr_power_down(cam);
 
 	mutex_lock(&cam->s_mutex);
 	if (cam->users > 0) {
 		cafe_ctlr_power_up(cam);
 		__cafe_cam_reset(cam);
+	} else {
+		cafe_ctlr_power_down(cam);
 	}
 	mutex_unlock(&cam->s_mutex);
 
-- 
cgit v1.2.3


From f23e6616ac2dc560db0ee8733024ebe90de9161a Mon Sep 17 00:00:00 2001
From: Malcolm Priestley <tvboxspy@gmail.com>
Date: Wed, 27 Oct 2010 19:50:36 -0300
Subject: [media] lmed04: Improve frontend handling

Improved frontend handling.

Frontend now remains open at all times, with signal lock, snr & signal level
polled from Interupt.

Updated driver for DM04/QQBOX USB DVB-S BOXES to version 1.70.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/lmedm04.c | 153 +++++++++++++++++-------------------
 1 file changed, 71 insertions(+), 82 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d939fbbf9fe6..3a32c65ee04c 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -112,7 +112,6 @@ struct lme2510_state {
 	u8 i2c_tuner_gate_r;
 	u8 i2c_tuner_addr;
 	u8 stream_on;
-	u8 one_tune;
 	void *buffer;
 	struct urb *lme_urb;
 	void *usb_buffer;
@@ -182,15 +181,13 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
 	return (ret < 0) ? -ENODEV : 0;
 }
 
-static int lme2510_usb_talk_restart(struct dvb_usb_device *d,
-		u8 *wbuf, int wlen, u8 *rbuf, int rlen) {
+static int lme2510_stream_restart(struct dvb_usb_device *d)
+{
 	static u8 stream_on[] = LME_ST_ON_W;
 	int ret;
 	u8 rbuff[10];
-	/*Send Normal Command*/
-	ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
 	/*Restart Stream Command*/
-	ret |= lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+	ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
 			rbuff, sizeof(rbuff));
 	return ret;
 }
@@ -254,11 +251,16 @@ static void lme2510_int_response(struct urb *lme_urb)
 			case TUNER_S7395:
 				/* Tweak for earlier firmware*/
 				if (ibuf[1] == 0x03) {
+					if (ibuf[2] > 1)
+						st->signal_lock = ibuf[2];
 					st->signal_level = ibuf[3];
 					st->signal_sn = ibuf[4];
 				} else {
 					st->signal_level = ibuf[4];
 					st->signal_sn = ibuf[5];
+					st->signal_lock =
+						(st->signal_lock & 0xf7) +
+						((ibuf[2] & 0x01) << 0x03);
 				}
 				break;
 			default:
@@ -341,11 +343,10 @@ static int lme2510_msg(struct dvb_usb_device *d,
 					st->signal_lock = rbuf[1];
 					if ((st->stream_on & 1) &&
 						(st->signal_lock & 0x10)) {
-						lme2510_usb_talk_restart(d,
-							wbuf, wlen, rbuf, rlen);
+						lme2510_stream_restart(d);
 						st->i2c_talk_onoff = 0;
 					}
-				msleep(80);
+					msleep(80);
 				}
 			}
 			break;
@@ -355,15 +356,12 @@ static int lme2510_msg(struct dvb_usb_device *d,
 					st->signal_lock = rbuf[1];
 					if ((st->stream_on & 1) &&
 						(st->signal_lock & 0x8)) {
-						lme2510_usb_talk_restart(d,
-							wbuf, wlen, rbuf, rlen);
+						lme2510_stream_restart(d);
 						st->i2c_talk_onoff = 0;
 					}
 				}
 				if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5))
 					msleep(5);
-
-
 			}
 			break;
 		default:
@@ -385,18 +383,16 @@ static int lme2510_msg(struct dvb_usb_device *d,
 				rbuf[0] = 0x55;
 				rbuf[1] = st->signal_sn;
 				break;
-			/*DiSEqC functions as per TDA10086*/
-			case 0x36:
-			case 0x48:
-			case 0x49:
-			case 0x4a:
-			case 0x4b:
-			case 0x4c:
-			case 0x4d:
-			if (wbuf[2] == 0x1c)
-					lme2510_usb_talk_restart(d,
-						wbuf, wlen, rbuf, rlen);
+			case 0x15:
+			case 0x16:
+			case 0x17:
+			case 0x18:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0x00;
+				break;
 			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
 				break;
 			}
 			break;
@@ -413,39 +409,22 @@ static int lme2510_msg(struct dvb_usb_device *d,
 				break;
 			case 0x24:
 				rbuf[0] = 0x55;
-				rbuf[1] = (st->signal_level & 0x80)
-						? 0 : st->signal_lock;
-				break;
-			case 0x6:
-				if (wbuf[2] == 0xd0)
-					lme2510_usb_talk(d,
-						wbuf, wlen, rbuf, rlen);
-				break;
-			case 0x1:
-				if (st->one_tune > 0)
-					break;
-				st->one_tune++;
-				st->i2c_talk_onoff = 1;
-			/*DiSEqC functions as per STV0288*/
-			case 0x5:
-			case 0x7:
-			case 0x8:
-			case 0x9:
-			case 0xa:
-			case 0xb:
-				if (wbuf[2] == 0xd0)
-					lme2510_usb_talk_restart(d,
-						wbuf, wlen, rbuf, rlen);
+				rbuf[1] = st->signal_lock;
 				break;
-			default:
+			case 0x2e:
+			case 0x26:
+			case 0x27:
 				rbuf[0] = 0x55;
 				rbuf[1] = 0x00;
 				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
 			}
 			break;
 		default:
 			break;
-
 		}
 
 		deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
@@ -548,35 +527,26 @@ static int lme2510_identify_state(struct usb_device *udev,
 static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
 	struct lme2510_state *st = adap->dev->priv;
-	static u8 stream_on[] = LME_ST_ON_W;
 	static u8 clear_reg_3[] =  LME_CLEAR_PID;
 	static u8 rbuf[1];
-	static u8 timeout;
-	int ret = 0, len = 2, rlen = sizeof(rbuf);
+	int ret = 0, rlen = sizeof(rbuf);
 
 	deb_info(1, "STM  (%02x)", onoff);
 
-	if (onoff == 1)	{
-		st->i2c_talk_onoff = 0;
-		timeout = 0;
-		/* wait for i2C to be free */
-		while (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) {
-			timeout++;
-			if (timeout > 5)
-				return -ENODEV;
-		}
-		msleep(100);
-		ret |= lme2510_usb_talk(adap->dev,
-				 stream_on,  len, rbuf, rlen);
+	/* Streaming is started by FE_HAS_LOCK */
+	if (onoff == 1)
 		st->stream_on = 1;
-		st->one_tune = 0;
-		mutex_unlock(&adap->dev->i2c_mutex);
-	} else {
+	else {
 		deb_info(1, "STM Steam Off");
+		/* mutex is here only to avoid collision with I2C */
+		ret = mutex_lock_interruptible(&adap->dev->i2c_mutex);
+
 		ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
 				sizeof(clear_reg_3), rbuf, rlen);
 		st->stream_on = 0;
 		st->i2c_talk_onoff = 1;
+
+		mutex_unlock(&adap->dev->i2c_mutex);
 	}
 
 	return (ret < 0) ? -ENODEV : 0;
@@ -619,6 +589,7 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap)
 		ir_input_unregister(input_dev);
 		input_free_device(input_dev);
 	}
+
 	return (ret < 0) ? -ENODEV : 0;
 }
 
@@ -668,6 +639,7 @@ static int lme2510_download_firmware(struct usb_device *dev,
 		ret |= (data[0] == 0x88) ? 0 : -1;
 		}
 	}
+
 	usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
 
@@ -701,6 +673,7 @@ static void lme_coldreset(struct usb_device *dev)
 	info("FRM Firmware Cold Reset");
 	ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/
 	ret |= lme2510_bulk_read(dev, data, len_in, 1);
+
 	return;
 }
 
@@ -712,6 +685,8 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 	char *firm_msg[] = {"Loading", "Switching to"};
 	int ret;
 
+	cold = (cold > 0) ? (cold & 1) : 0;
+
 	if (udev->descriptor.idProduct == 0x1122)
 		return;
 
@@ -740,22 +715,26 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 		cold = 0;
 		break;
 	}
+
 	release_firmware(fw);
+
 	if (cold)
 		lme_coldreset(udev);
+
 	return;
 }
 
 static int lme2510_kill_urb(struct usb_data_stream *stream)
 {
 	int i;
+
 	for (i = 0; i < stream->urbs_submitted; i++) {
 		deb_info(3, "killing URB no. %d.", i);
-
 		/* stop the URB */
 		usb_kill_urb(stream->urb_list[i]);
 	}
 	stream->urbs_submitted = 0;
+
 	return 0;
 }
 
@@ -783,18 +762,13 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
 					fe_sec_voltage_t voltage)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct lme2510_state *st = adap->dev->priv;
 	static u8 voltage_low[]	= LME_VOLTAGE_L;
 	static u8 voltage_high[] = LME_VOLTAGE_H;
-	static u8 lnb_on[] = LNB_ON;
-	static u8 lnb_off[] = LNB_OFF;
 	static u8 rbuf[1];
 	int ret = 0, len = 3, rlen = 1;
 
-	if (st->stream_on == 1)
-		return 0;
-
-	ret |= lme2510_usb_talk(adap->dev, lnb_on, len, rbuf, rlen);
+	if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+			return -EAGAIN;
 
 	switch (voltage) {
 	case SEC_VOLTAGE_18:
@@ -803,17 +777,15 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
 		break;
 
 	case SEC_VOLTAGE_OFF:
-		ret |= lme2510_usb_talk(adap->dev,
-					lnb_off, len, rbuf, rlen);
 	case SEC_VOLTAGE_13:
 	default:
 		ret |= lme2510_usb_talk(adap->dev,
 				voltage_low, len, rbuf, rlen);
 		break;
+	}
 
+	mutex_unlock(&adap->dev->i2c_mutex);
 
-	};
-	st->i2c_talk_onoff = 1;
 	return (ret < 0) ? -ENODEV : 0;
 }
 
@@ -850,12 +822,14 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 			if (dvb_usb_lme2510_firmware != 1) {
 				dvb_usb_lme2510_firmware = 1;
 				lme_firmware_switch(adap->dev->udev, 1);
-			}
+			} else /*stops LG/Sharp multi tuner problems*/
+				dvb_usb_lme2510_firmware = 0;
 			return 0;
 		}
 		kfree(adap->fe);
 		adap->fe = NULL;
 	}
+
 	st->i2c_gate = 5;
 	adap->fe = dvb_attach(stv0288_attach, &lme_config,
 			&adap->dev->i2c_adap);
@@ -889,8 +863,23 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
 {
 	struct lme2510_state *st = d->priv;
+	static u8 lnb_on[] = LNB_ON;
+	static u8 lnb_off[] = LNB_OFF;
+	static u8 rbuf[1];
+	int ret, len = 3, rlen = 1;
+
+	ret = mutex_lock_interruptible(&d->i2c_mutex);
+
+	if (onoff)
+		ret |= lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+	else
+		ret |= lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+
 	st->i2c_talk_onoff = 1;
-	return 0;
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret;
 }
 
 /* DVB USB Driver stuff */
@@ -1084,5 +1073,5 @@ module_exit(lme2510_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.60");
+MODULE_VERSION("1.70");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 25ad9847ca09f744b4cfea362d339c8b5b49765c Mon Sep 17 00:00:00 2001
From: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu, 4 Nov 2010 17:17:51 -0300
Subject: [media] lmedm04: change USB Timeouts to avoid troubles

DM04/QQBOX USB Timing change.

Improved timing to avoid USB corruptions on some systems.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/lmedm04.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index 3a32c65ee04c..de7f1fbec92e 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -124,7 +124,7 @@ static int lme2510_bulk_write(struct usb_device *dev,
 	int ret, actual_l;
 
 	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
-				snd, len , &actual_l, 500);
+				snd, len , &actual_l, 100);
 	return ret;
 }
 
@@ -134,7 +134,7 @@ static int lme2510_bulk_read(struct usb_device *dev,
 	int ret, actual_l;
 
 	ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
-				 rev, len , &actual_l, 500);
+				 rev, len , &actual_l, 200);
 	return ret;
 }
 
@@ -166,7 +166,7 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
 
 	ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
 
-	msleep(12);
+	msleep(10);
 
 	ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01));
 
@@ -1073,5 +1073,5 @@ module_exit(lme2510_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.70");
+MODULE_VERSION("1.71");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 314b3e0881c6acb4f40e07565ac1a7798c7698a3 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 26 Oct 2010 05:15:46 -0300
Subject: [media] gspca: submit interrupt urbs *after* isoc urbs

Currently gspca supported usb-1.1 webcams for which we support the input
button through an interrupt endpoint won't stream (not enough bandwidth
error) when used through an USB-2.0 hub.

After much debugging I've found out that the cause for this is that the
ehci-sched.c schedeling code does not like it when there are already urb's
scheduled when (large) isoc urbs are queued. By moving the submission
of the interrupt urbs to after submitting the isoc urbs the camera
starts working again through usb-2.0 hubs.

Note that this does not fix isoc. streaming through a usb-hub while another
1.1 usb device (like the microphone of the same cam) is also active
at the same time :(

I've spend a long time analyzing the linux kernel ehci scheduler code,
resulting in this (long) mail:
http://www.spinics.net/lists/linux-usb/msg37982.html

The conclusion of the following mail thread is that yes there are several
issues when using usb-1.1 devices through a usb-2.0 hub, but these are not
easily fixable in the current code. Fixing this in ehci-sched.c requires
an almost full rewrite, which is not bound to happen anytime soon.

So with this patch gspca driven usb-1.1 webcams will atleast work when
connected through an usb-2.0 hub when the microphone is not used.

As an added bonus this patch avoids extra destroy/create input urb cycles
when we end up falling back to a lower speed alt setting because of bandwidth
limitations.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 8fe8fb486d62..dbd63c542317 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -676,13 +676,11 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 			i, ep->desc.bEndpointAddress);
 	gspca_dev->alt = i;		/* memorize the current alt setting */
 	if (gspca_dev->nbalt > 1) {
-		gspca_input_destroy_urb(gspca_dev);
 		ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
 		if (ret < 0) {
 			err("set alt %d err %d", i, ret);
 			ep = NULL;
 		}
-		gspca_input_create_urb(gspca_dev);
 	}
 	return ep;
 }
@@ -781,7 +779,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 
 	if (!gspca_dev->present) {
 		ret = -ENODEV;
-		goto out;
+		goto unlock;
 	}
 
 	/* reset the streaming variables */
@@ -802,8 +800,10 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 	if (gspca_dev->sd_desc->isoc_init) {
 		ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
 		if (ret < 0)
-			goto out;
+			goto unlock;
 	}
+
+	gspca_input_destroy_urb(gspca_dev);
 	ep = get_ep(gspca_dev);
 	if (ep == NULL) {
 		ret = -EIO;
@@ -873,6 +873,8 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 		}
 	}
 out:
+	gspca_input_create_urb(gspca_dev);
+unlock:
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;
 }
-- 
cgit v1.2.3


From 2661da47daefd4f22f9fdc7e9294a1cb9edf515b Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 26 Oct 2010 05:16:32 -0300
Subject: [media] gspca: only set gspca->int_urb if submitting it succeeds

Currently alloc_and_submit_int_urb() is setting gspca->int_urb
as soon as the allocation has succeeded, but if the subsequent
submit fails, the urb gets destroyed. And then later will
get destroyed again in gspca_input_destroy_urb() because
gspca->int_urb is set, leading to a double free.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index dbd63c542317..a089fcaed8ad 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -224,12 +224,12 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 		buffer, buffer_len,
 		int_irq, (void *)gspca_dev, interval);
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	gspca_dev->int_urb = urb;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
 		PDEBUG(D_ERR, "submit int URB failed with error %i", ret);
 		goto error_submit;
 	}
+	gspca_dev->int_urb = urb;
 	return ret;
 
 error_submit:
-- 
cgit v1.2.3


From bc46bae6373c87897959c7aa8fb9f6c4218695b8 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 26 Oct 2010 11:18:59 -0300
Subject: [media] gspca_xirlink_cit: various usb bandwidth allocation
 improvements / fixes

The following usb bandwidth allocation changes were made to the ibm netcam
pro code:
- Don't restart negotiation at max packet size on stop0, as that gets called
  by gspca_main during negotiation. Move this to sd_isoc_init.
- Don't ask for full bandwidth when running at 160x120, that does not need
  full bandwidth
- Make minimum acceptable bandwidth depend upon resolution

[mchehab@redhat.com: Fix CodingStyle problems at switch statements]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/xirlink_cit.c | 53 ++++++++++++++++++++++++++-------
 1 file changed, 43 insertions(+), 10 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c
index 8715577bc2d8..daeda2cd9d09 100644
--- a/drivers/media/video/gspca/xirlink_cit.c
+++ b/drivers/media/video/gspca/xirlink_cit.c
@@ -2769,16 +2769,55 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct usb_host_interface *alt;
+	int max_packet_size;
+
+	switch (gspca_dev->width) {
+	case 160:
+		max_packet_size = 450;
+		break;
+	case 176:
+		max_packet_size = 600;
+		break;
+	default:
+		max_packet_size = 1022;
+		break;
+	}
+
+	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+
+	return 0;
+}
+
 static int sd_isoc_nego(struct gspca_dev *gspca_dev)
 {
-	int ret, packet_size;
+	int ret, packet_size, min_packet_size;
 	struct usb_host_interface *alt;
 
+	switch (gspca_dev->width) {
+	case 160:
+		min_packet_size = 200;
+		break;
+	case 176:
+		min_packet_size = 266;
+		break;
+	default:
+		min_packet_size = 400;
+		break;
+	}
+
 	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
-	packet_size -= 100;
-	if (packet_size < 300)
+	if (packet_size <= min_packet_size)
 		return -EIO;
+
+	packet_size -= 100;
+	if (packet_size < min_packet_size)
+		packet_size = min_packet_size;
 	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size);
 
 	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
@@ -2796,15 +2835,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_host_interface *alt;
 
 	/* We cannot use gspca_dev->present here as that is not set when
 	   sd_init gets called and we get called from sd_init */
 	if (!gspca_dev->dev)
 		return;
 
-	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
-
 	switch (sd->model) {
 	case CIT_MODEL0:
 		/* HDG windows does this, but it causes the cams autogain to
@@ -2859,10 +2895,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		   restarting the stream after this */
 		/* cit_write_reg(gspca_dev, 0x0000, 0x0112); */
 		cit_write_reg(gspca_dev, 0x00c0, 0x0100);
-
-		/* Start isoc bandwidth "negotiation" at max isoc bandwith
-		   next stream start */
-		alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(1022);
 		break;
 	}
 }
@@ -3179,6 +3211,7 @@ static const struct sd_desc sd_desc_isoc_nego = {
 	.config = sd_config,
 	.init = sd_init,
 	.start = sd_start,
+	.isoc_init = sd_isoc_init,
 	.isoc_nego = sd_isoc_nego,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-- 
cgit v1.2.3


From 2c4e776aa370a7a1619c7ada0604e9003fe1d92a Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 26 Oct 2010 17:21:33 -0300
Subject: [media] gspca_xirlink_cit: Frames have a 4 byte footer

At least on the ibm netcam pro frames have a 4 byte footer, take this
into account when calculating sizeimage.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/xirlink_cit.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c
index daeda2cd9d09..157fbedbf493 100644
--- a/drivers/media/video/gspca/xirlink_cit.c
+++ b/drivers/media/video/gspca/xirlink_cit.c
@@ -185,60 +185,60 @@ static const struct ctrl sd_ctrls[] = {
 static const struct v4l2_pix_format cif_yuv_mode[] = {
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{352, 288, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 2,
+		.sizeimage = 352 * 288 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format vga_yuv_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 2,
+		.sizeimage = 320 * 240 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{640, 480, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 2,
+		.sizeimage = 640 * 480 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format model0_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 2,
+		.sizeimage = 320 * 240 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format model2_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240,
+		.sizeimage = 320 * 240 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{352, 288, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288,
+		.sizeimage = 352 * 288 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
-- 
cgit v1.2.3


From e0657be5615f666f261206ed62c3f0dc2527956e Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 27 Oct 2010 06:38:07 -0300
Subject: [media] gspca_xirlink_cit: Add support camera button

gspca_xirlink_cit: Add support camera button

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/xirlink_cit.c | 117 +++++++++++++++++++++++---------
 1 file changed, 84 insertions(+), 33 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c
index 157fbedbf493..5b5039a02031 100644
--- a/drivers/media/video/gspca/xirlink_cit.c
+++ b/drivers/media/video/gspca/xirlink_cit.c
@@ -29,6 +29,7 @@
 
 #define MODULE_NAME "xirlink-cit"
 
+#include <linux/input.h>
 #include "gspca.h"
 
 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
@@ -58,6 +59,7 @@ struct sd {
 #define CIT_MODEL4 4
 #define CIT_IBM_NETCAM_PRO 5
 	u8 input_index;
+	u8 button_state;
 	u8 stop_on_control_change;
 	u8 sof_read;
 	u8 sof_len;
@@ -804,7 +806,7 @@ static int cit_write_reg(struct gspca_dev *gspca_dev, u16 value, u16 index)
 	return 0;
 }
 
-static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index)
+static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index, int verbose)
 {
 	struct usb_device *udev = gspca_dev->dev;
 	__u8 *buf = gspca_dev->usb_buf;
@@ -819,10 +821,8 @@ static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index)
 		return res;
 	}
 
-	PDEBUG(D_PROBE,
-	       "Register %04x value: %02x %02x %02x %02x %02x %02x %02x %02x",
-	       index,
-	       buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
+	if (verbose)
+		PDEBUG(D_PROBE, "Register %04x value: %02x", index, buf[0]);
 
 	return 0;
 }
@@ -907,7 +907,7 @@ static void cit_Packet_Format1(struct gspca_dev *gspca_dev, u16 fkey, u16 val)
 	cit_send_x_00_05(gspca_dev, 0x0089);
 	cit_send_x_00(gspca_dev, fkey);
 	cit_send_00_04_06(gspca_dev);
-	cit_read_reg(gspca_dev, 0x0126);
+	cit_read_reg(gspca_dev, 0x0126, 0);
 	cit_send_FF_04_02(gspca_dev);
 }
 
@@ -1074,12 +1074,12 @@ static int cit_init_model0(struct gspca_dev *gspca_dev)
 
 static int cit_init_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 {
-	cit_read_reg(gspca_dev, 0x128);
+	cit_read_reg(gspca_dev, 0x128, 1);
 	cit_write_reg(gspca_dev, 0x0003, 0x0133);
 	cit_write_reg(gspca_dev, 0x0000, 0x0117);
 	cit_write_reg(gspca_dev, 0x0008, 0x0123);
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x0000, 0x0133);
@@ -1098,7 +1098,7 @@ static int cit_init_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 	cit_write_reg(gspca_dev, 0x00ff, 0x0130);
 	cit_write_reg(gspca_dev, 0xcd41, 0x0124);
 	cit_write_reg(gspca_dev, 0xfffa, 0x0124);
-	cit_read_reg(gspca_dev, 0x0126);
+	cit_read_reg(gspca_dev, 0x0126, 1);
 
 	cit_model3_Packet1(gspca_dev, 0x0000, 0x0000);
 	cit_model3_Packet1(gspca_dev, 0x0000, 0x0001);
@@ -1557,18 +1557,20 @@ static int cit_restart_stream(struct gspca_dev *gspca_dev)
 	switch (sd->model) {
 	case CIT_MODEL0:
 	case CIT_MODEL1:
-	case CIT_MODEL3:
-	case CIT_IBM_NETCAM_PRO:
 		cit_write_reg(gspca_dev, 0x0001, 0x0114);
 		/* Fall through */
 	case CIT_MODEL2:
 	case CIT_MODEL4:
 		cit_write_reg(gspca_dev, 0x00c0, 0x010c); /* Go! */
 		usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
-		/* This happens repeatedly while streaming with the ibm netcam
-		   pro and the ibmcam driver did it for model3 after changing
-		   settings, but it does not seem to have any effect. */
-		/* cit_write_reg(gspca_dev, 0x0001, 0x0113); */
+		break;
+	case CIT_MODEL3:
+	case CIT_IBM_NETCAM_PRO:
+		cit_write_reg(gspca_dev, 0x0001, 0x0114);
+		cit_write_reg(gspca_dev, 0x00c0, 0x010c); /* Go! */
+		usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
+		/* Clear button events from while we were not streaming */
+		cit_write_reg(gspca_dev, 0x0001, 0x0113);
 		break;
 	}
 
@@ -1680,23 +1682,23 @@ static int cit_start_model1(struct gspca_dev *gspca_dev)
 	if (clock_div < 0)
 		return clock_div;
 
-	cit_read_reg(gspca_dev, 0x0128);
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0128, 1);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x01, 0x0100);	/* LED On  */
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x81, 0x0100);	/* LED Off */
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x01, 0x0100);	/* LED On  */
 	cit_write_reg(gspca_dev, 0x01, 0x0108);
 
 	cit_write_reg(gspca_dev, 0x03, 0x0112);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x06, 0x0115);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x44, 0x0116);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x40, 0x0116);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x0e, 0x0115);
 	cit_write_reg(gspca_dev, 0x19, 0x012c);
 
@@ -1878,7 +1880,7 @@ static int cit_start_model2(struct gspca_dev *gspca_dev)
 	int clock_div = 0;
 
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);	/* LED on */
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x00bc, 0x012c);
@@ -2070,10 +2072,10 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 
 	/* HDG not in ibmcam driver, added to see if it helps with
 	   auto-detecting between model3 and ibm netcamera pro */
-	cit_read_reg(gspca_dev, 0x128);
+	cit_read_reg(gspca_dev, 0x128, 1);
 
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x0000, 0x0123);
@@ -2083,7 +2085,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0115);
 	cit_write_reg(gspca_dev, 0x0003, 0x0115);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x000b, 0x0115);
 
 	/* TESTME HDG not in ibmcam driver, added to see if it helps with
@@ -2096,7 +2098,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 		cit_write_reg(gspca_dev, 0x00ff, 0x0130);
 		cit_write_reg(gspca_dev, 0xcd41, 0x0124);
 		cit_write_reg(gspca_dev, 0xfffa, 0x0124);
-		cit_read_reg(gspca_dev, 0x0126);
+		cit_read_reg(gspca_dev, 0x0126, 1);
 	}
 
 	cit_model3_Packet1(gspca_dev, 0x000a, 0x0040);
@@ -2293,7 +2295,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 	if (rca_input) {
 		for (i = 0; i < ARRAY_SIZE(rca_initdata); i++) {
 			if (rca_initdata[i][0])
-				cit_read_reg(gspca_dev, rca_initdata[i][2]);
+				cit_read_reg(gspca_dev, rca_initdata[i][2], 0);
 			else
 				cit_write_reg(gspca_dev, rca_initdata[i][1],
 					      rca_initdata[i][2]);
@@ -2712,7 +2714,7 @@ static int cit_start_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 	if (rca_input) {
 		for (i = 0; i < ARRAY_SIZE(rca_initdata); i++) {
 			if (rca_initdata[i][0])
-				cit_read_reg(gspca_dev, rca_initdata[i][2]);
+				cit_read_reg(gspca_dev, rca_initdata[i][2], 0);
 			else
 				cit_write_reg(gspca_dev, rca_initdata[i][1],
 					      rca_initdata[i][2]);
@@ -2851,7 +2853,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		break;
 	case CIT_MODEL1:
 		cit_send_FF_04_02(gspca_dev);
-		cit_read_reg(gspca_dev, 0x0100);
+		cit_read_reg(gspca_dev, 0x0100, 0);
 		cit_write_reg(gspca_dev, 0x81, 0x0100);	/* LED Off */
 		break;
 	case CIT_MODEL2:
@@ -2870,9 +2872,9 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	case CIT_MODEL3:
 		cit_write_reg(gspca_dev, 0x0006, 0x012c);
 		cit_model3_Packet1(gspca_dev, 0x0046, 0x0000);
-		cit_read_reg(gspca_dev, 0x0116);
+		cit_read_reg(gspca_dev, 0x0116, 0);
 		cit_write_reg(gspca_dev, 0x0064, 0x0116);
-		cit_read_reg(gspca_dev, 0x0115);
+		cit_read_reg(gspca_dev, 0x0115, 0);
 		cit_write_reg(gspca_dev, 0x0003, 0x0115);
 		cit_write_reg(gspca_dev, 0x0008, 0x0123);
 		cit_write_reg(gspca_dev, 0x0000, 0x0117);
@@ -2897,6 +2899,15 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		cit_write_reg(gspca_dev, 0x00c0, 0x0100);
 		break;
 	}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	/* If the last button state is pressed, release it now! */
+	if (sd->button_state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = 0;
+	}
+#endif
 }
 
 static u8 *cit_find_sof(struct gspca_dev *gspca_dev, u8 *data, int len)
@@ -3190,6 +3201,38 @@ static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static void cit_check_button(struct gspca_dev *gspca_dev)
+{
+	int new_button_state;
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	switch (sd->model) {
+	case CIT_MODEL3:
+	case CIT_IBM_NETCAM_PRO:
+		break;
+	default: /* TEST ME unknown if this works on other models too */
+		return;
+	}
+
+	/* Read the button state */
+	cit_read_reg(gspca_dev, 0x0113, 0);
+	new_button_state = !gspca_dev->usb_buf[0];
+
+	/* Tell the cam we've seen the button press, notice that this
+	   is a nop (iow the cam keeps reporting pressed) until the
+	   button is actually released. */
+	if (new_button_state)
+		cit_write_reg(gspca_dev, 0x01, 0x0113);
+
+	if (sd->button_state != new_button_state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA,
+				 new_button_state);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = new_button_state;
+	}
+}
+#endif
 
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
@@ -3202,6 +3245,10 @@ static const struct sd_desc sd_desc = {
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.dq_callback = cit_check_button,
+	.other_input = 1,
+#endif
 };
 
 static const struct sd_desc sd_desc_isoc_nego = {
@@ -3216,6 +3263,10 @@ static const struct sd_desc sd_desc_isoc_nego = {
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.dq_callback = cit_check_button,
+	.other_input = 1,
+#endif
 };
 
 /* -- module initialisation -- */
-- 
cgit v1.2.3


From 614d06917de2823d598a4b231256d08074044235 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 27 Oct 2010 07:42:28 -0300
Subject: [media] gspca_ov519: generate release button event on stream stop if
 needed

Generate a release button event when the button is still pressed when the
stream stops.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 6cf6855aa506..19f943e45ca2 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -3912,7 +3912,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	   pressed while we weren't streaming */
 	sd->snapshot_needs_reset = 1;
 	sd_reset_snapshot(gspca_dev);
-	sd->snapshot_pressed = 0;
 
 	sd->first_frame = 3;
 
@@ -3940,6 +3939,15 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 
 	if (sd->bridge == BRIDGE_W9968CF)
 		w9968cf_stop0(sd);
+
+#ifdef CONFIG_INPUT
+	/* If the last button state is pressed, release it now! */
+	if (sd->snapshot_pressed) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+		input_sync(gspca_dev->input_dev);
+		sd->snapshot_pressed = 0;
+	}
+#endif
 }
 
 static void ov51x_handle_button(struct gspca_dev *gspca_dev, u8 state)
-- 
cgit v1.2.3


From 0b8851b6c3934a56eb1a4ff284ab5133065e0cb8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 29 Oct 2010 07:56:06 -0300
Subject: [media] gspca - main: Version change
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index a089fcaed8ad..fe2c8ec51abc 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 10, 0)
+#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 11, 0)
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
-- 
cgit v1.2.3


From a23c1947f4da31d9aac9bfc05ef22d8148b2f106 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 29 Oct 2010 07:57:03 -0300
Subject: [media] gspca - main: Fix a small code error
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index fe2c8ec51abc..0a7af7371509 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -757,7 +757,7 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 			}
 		} else {		/* bulk */
 			urb->pipe = usb_rcvbulkpipe(gspca_dev->dev,
-						ep->desc.bEndpointAddress),
+						ep->desc.bEndpointAddress);
 			urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 			urb->complete = bulk_irq;
 		}
-- 
cgit v1.2.3


From d581bcd78be567af7026e3d13b54ec7df8db8b82 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 29 Oct 2010 08:01:01 -0300
Subject: [media] gspca - zc3xx: Bad clocksetting for mt9v111_3 with 640x480
 resolution
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The bad value prevented the autogain to work correctly
and some images were truncated.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/zc3xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index c7e1970ca284..042dc808593f 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -4499,7 +4499,7 @@ static const struct usb_action mt9v111_3_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
-	{0xa0, 0x04, ZC3XX_R002_CLOCKSELECT},
+	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
-- 
cgit v1.2.3


From a79cc7b9182abb2e3936a26064dec414b417f1d1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 29 Oct 2010 08:10:37 -0300
Subject: [media] gspca - sonixj: Simplify and clarify the hv7131r probe
 function
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index e23de57e2c73..901ca81e81e1 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1598,22 +1598,22 @@ static void i2c_w_seq(struct gspca_dev *gspca_dev,
 	}
 }
 
+/* check the ID of the hv7131 sensor */
+/* this sequence is needed because it activates the sensor */
 static void hv7131r_probe(struct gspca_dev *gspca_dev)
 {
-	i2c_w1(gspca_dev, 0x02, 0);			/* sensor wakeup */
+	i2c_w1(gspca_dev, 0x02, 0);		/* sensor wakeup */
 	msleep(10);
-	reg_w1(gspca_dev, 0x02, 0x66);			/* Gpio on */
+	reg_w1(gspca_dev, 0x02, 0x66);		/* Gpio on */
 	msleep(10);
-	i2c_r(gspca_dev, 0, 5);				/* read sensor id */
-	if (gspca_dev->usb_buf[0] == 0x02
+	i2c_r(gspca_dev, 0, 5);			/* read sensor id */
+	if (gspca_dev->usb_buf[0] == 0x02	/* chip ID (02 is R) */
 	    && gspca_dev->usb_buf[1] == 0x09
-	    && gspca_dev->usb_buf[2] == 0x01
-	    && gspca_dev->usb_buf[3] == 0x00
-	    && gspca_dev->usb_buf[4] == 0x00) {
-		PDEBUG(D_PROBE, "Sensor sn9c102P HV7131R found");
+	    && gspca_dev->usb_buf[2] == 0x01) {
+		PDEBUG(D_PROBE, "Sensor HV7131R found");
 		return;
 	}
-	PDEBUG(D_PROBE, "Sensor 0x%02x 0x%02x 0x%02x - sn9c102P not found",
+	warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x",
 		gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
 		gspca_dev->usb_buf[2]);
 }
-- 
cgit v1.2.3


From 1d00d6c1ff13607974fcd9469aa9466fcd253c3a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 29 Oct 2010 13:58:22 -0300
Subject: [media] gspca: Convert some uppercase hexadecimal values to lowercase
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/cpia1.c                  | 10 +++++-----
 drivers/media/video/gspca/m5602/m5602_ov9650.c     |  2 +-
 drivers/media/video/gspca/pac207.c                 |  4 ++--
 drivers/media/video/gspca/sonixb.c                 |  4 ++--
 drivers/media/video/gspca/spca561.c                |  2 +-
 drivers/media/video/gspca/stv06xx/stv06xx.c        |  2 +-
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.c |  4 ++--
 drivers/media/video/gspca/t613.c                   |  2 +-
 drivers/media/video/gspca/tv8532.c                 |  2 +-
 9 files changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
index 9b121681d135..80b8dae5e619 100644
--- a/drivers/media/video/gspca/cpia1.c
+++ b/drivers/media/video/gspca/cpia1.c
@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL");
 /* constant value's */
 #define MAGIC_0		0x19
 #define MAGIC_1		0x68
-#define DATA_IN		0xC0
+#define DATA_IN		0xc0
 #define DATA_OUT	0x40
 #define VIDEOSIZE_QCIF	0	/* 176x144 */
 #define VIDEOSIZE_CIF	1	/* 352x288 */
@@ -660,9 +660,9 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command,
 		if (sd->params.qx3.button) {
 			/* button pressed - unlock the latch */
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xDF, 0xDF, 0);
+				   3, 0xdf, 0xdf, 0);
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xFF, 0xFF, 0);
+				   3, 0xff, 0xff, 0);
 		}
 
 		/* test whether microscope is cradled */
@@ -1110,12 +1110,12 @@ static int command_setlights(struct gspca_dev *gspca_dev)
 	p2 = (sd->params.qx3.toplight == 0) << 3;
 
 	ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg,
-			 0x90, 0x8F, 0x50, 0);
+			 0x90, 0x8f, 0x50, 0);
 	if (ret)
 		return ret;
 
 	return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0,
-			  p1 | p2 | 0xE0, 0);
+			  p1 | p2 | 0xe0, 0);
 }
 
 static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply)
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c
index 8ded8b100576..703d48670a24 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -624,7 +624,7 @@ static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 
 	/* Mask away all uninteresting bits */
 	i2c_data = ((val & 0x0300) >> 2) |
-			(i2c_data & 0x3F);
+			(i2c_data & 0x3f);
 	err = m5602_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
 	if (err < 0)
 		return err;
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 15e97fa4c337..96f9986305b4 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -162,7 +162,7 @@ static const __u8 pac207_sensor_init[][8] = {
 	{0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0x84},
 	{0x49, 0x64, 0x64, 0x64, 0x04, 0x10, 0xf0, 0x30},
 	{0x00, 0x00, 0x00, 0x70, 0xa0, 0xf8, 0x00, 0x00},
-	{0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xaf, 0x00},
+	{0x32, 0x00, 0x96, 0x00, 0xa2, 0x02, 0xaf, 0x00},
 };
 
 static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
@@ -228,7 +228,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	idreg[0] = pac207_read_reg(gspca_dev, 0x0000);
 	idreg[1] = pac207_read_reg(gspca_dev, 0x0001);
-	idreg[0] = ((idreg[0] & 0x0F) << 4) | ((idreg[1] & 0xf0) >> 4);
+	idreg[0] = ((idreg[0] & 0x0f) << 4) | ((idreg[1] & 0xf0) >> 4);
 	idreg[1] = idreg[1] & 0x0f;
 	PDEBUG(D_PROBE, "Pixart Sensor ID 0x%02X Chips ID 0x%02X",
 		idreg[0], idreg[1]);
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 706f96f92654..11b19728a41d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -340,7 +340,7 @@ static const __u8 ov6650_sensor_init[][8] = {
 		 * but blue wont be there. Avoid this data ... */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10},
-	{0xa0, 0x60, 0x30, 0x3d, 0x0A, 0xd8, 0xa4, 0x10},
+	{0xa0, 0x60, 0x30, 0x3d, 0x0a, 0xd8, 0xa4, 0x10},
 	/* Enable rgb brightness control */
 	{0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10},
 	/* HDG: Note windows uses the line below, which sets both register 0x60
@@ -505,7 +505,7 @@ static const __u8 pas202_sensor_init[][8] = {
 	{0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
 	{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
 	{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
-	{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
+	{0xd0, 0x40, 0x0c, 0x00, 0x0c, 0x01, 0x32, 0x10},
 	{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index ad73f4812c05..3a162c6d5466 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -597,7 +597,7 @@ static void setgain(struct gspca_dev *gspca_dev)
 	else if (sd->gain < 128)
 		gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40;
 	else
-		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0;
+		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xc0;
 
 	gspca_dev->usb_buf[1] = 0;
 	reg_w_buf(gspca_dev, 0x8335, 2);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 086de44a6e57..544d5f72a1e3 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -349,7 +349,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 		}
 
 		/* First byte seem to be 02=data 2nd byte is unknown??? */
-		if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+		if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200)
 			goto frame_data;
 
 		switch (id) {
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index 3af53264a364..ea677b5d071e 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -151,11 +151,11 @@ static int st6422_init(struct sd *sd)
 		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */
 		{ 0x1436, 0x00 },
 		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */
-		{ 0x143a, 0xF9 },	/* 0x00-0x0F contrast */
+		{ 0x143a, 0xf9 },	/* 0x00-0x0F contrast */
 		{ 0x0509, 0x38 },	/* R */
 		{ 0x050a, 0x38 },	/* G */
 		{ 0x050b, 0x38 },	/* B */
-		{ 0x050c, 0x2A },
+		{ 0x050c, 0x2a },
 		{ 0x050d, 0x01 },
 
 
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index b45f4d0f3997..8f0c33116e0d 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -487,7 +487,7 @@ static const u8 gamma_table[GAMMA_MAX][17] = {
 	{0x00, 0x02, 0x07, 0x0f, 0x18, 0x24, 0x30, 0x3f,	/* 3 */
 	 0x4f, 0x61, 0x73, 0x88, 0x9d, 0xb4, 0xcd, 0xe6,
 	 0xff},
-	{0x00, 0x04, 0x0B, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
+	{0x00, 0x04, 0x0b, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
 	 0x5b, 0x6c, 0x7f, 0x92, 0xa7, 0xbc, 0xd2, 0xe9,
 	 0xff},
 	{0x00, 0x07, 0x11, 0x15, 0x20, 0x2d, 0x48, 0x58,	/* 5 */
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index d9e3c6050781..38c22f0a4263 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -132,7 +132,7 @@ static const struct v4l2_pix_format sif_mode[] = {
 #define R36_PID		0x36
 #define R37_PIDH	0x37
 #define R39_Test1	0x39		/* GPIO */
-#define R3B_Test3	0x3B		/* GPIO */
+#define R3B_Test3	0x3b		/* GPIO */
 #define R83_AD_IDH	0x83
 #define R91_AD_SLOPEREG 0x91
 #define R94_AD_BITCONTROL 0x94
-- 
cgit v1.2.3


From 88464106f97fe1c143bda2b4019b07c3069d454c Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sun, 13 Jun 2010 17:31:22 -0300
Subject: [media] au8522: Properly set default brightness

The chip's default value for the brightness didn't match what we were sending
back in the queryctrl ioctl(), so if the application actually set the
brightness to the "default", it would actually end up being way too bright.

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/au8522_decoder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 6d9c5943eb3d..b36d1280f55f 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -622,7 +622,7 @@ static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
 		return v4l2_ctrl_query_fill(qc, 0, 255, 1,
 					    AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
 	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
 	case V4L2_CID_SATURATION:
 		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
 	case V4L2_CID_HUE:
-- 
cgit v1.2.3


From 83f859c5a6d6e01d671f002c0ade3498b4a4b245 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 25 Jun 2010 01:33:39 -0300
Subject: [media] au0828: set max packets per URB to match Windows driver

We had the max packets per URB set to an incredibly low "10" as opposed to
the Windows driver which has it as 128.  Set the value to match the
Windows driver, which will reduce interrupts considerably.

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 9905bc4f5f59..4dd8ce7f139e 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -53,7 +53,7 @@
 
 /* Defination for AU0828 USB transfer */
 #define AU0828_MAX_ISO_BUFS    12  /* maybe resize this value in the future */
-#define AU0828_ISO_PACKETS_PER_URB      10
+#define AU0828_ISO_PACKETS_PER_URB      128
 
 #define AU0828_MIN_BUF 4
 #define AU0828_DEF_BUF 8
-- 
cgit v1.2.3


From bde3bb9a67d2cd260df6be9726c9c360a0e3cee9 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Mon, 5 Jul 2010 13:05:16 -0300
Subject: [media] au0828: Fix field alignment for video frames delivered by
 driver

Fix the alignment of fields being delivered by the driver, which was
resulting in jerky video when there was horizontal motion (since the bottom
field of the frame was being sent with the top field of the previous frame)

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 162fd5f9d448..20ba5915542f 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -576,7 +576,7 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 			p += 4;
 			au0828_isocdbg("Video frame %s\n",
 				       (fbyte & 0x40) ? "odd" : "even");
-			if (!(fbyte & 0x40)) {
+			if (fbyte & 0x40) {
 				/* VBI */
 				if (vbi_buf != NULL)
 					vbi_buffer_filled(dev,
-- 
cgit v1.2.3


From 2428a2ed6a7cbc7be6db5c70c3838a4bf0de9f48 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sun, 27 Jun 2010 17:40:42 -0300
Subject: [media] au8522: cleanup code which disables audio decoder

Cleanup the routine which disables the audio decoder.  In particular, the i2s
output was being shut off but the audio processor itself was not, resulting
in more power being consumed than needed.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/au8522_decoder.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index b36d1280f55f..55b12ceb3ebc 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -410,29 +410,15 @@ static void au8522_setup_svideo_mode(struct au8522_state *state)
 
 static void disable_audio_input(struct au8522_state *state)
 {
-	/* This can probably be optimized */
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84);
-
-	au8522_writereg(state, AU8522_ENA_USB_REG101H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
-	au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
-	au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x40);
-
-	au8522_writereg(state, AU8522_GPIO_DATA_REG0E2H, 0x11);
-	msleep(5);
-	au8522_writereg(state, AU8522_GPIO_DATA_REG0E2H, 0x00);
 
 	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
-	au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
 	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
 
 	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
 }
 
 /* 0=disable, 1=SIF */
-- 
cgit v1.2.3


From d2c194ce4781d62bf671aa6b65a2fccb39feb50e Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sun, 27 Jun 2010 18:01:40 -0300
Subject: [media] au8522: fix clamp control for different video modes

Straighten out the clamp control configurations for the various video modes,
based off of register diffs done against the Hauppauge Windows driver.

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/au8522_decoder.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 55b12ceb3ebc..5ec869706409 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -347,9 +347,11 @@ static void au8522_setup_cvbs_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
 			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
 
+	/* PGA in automatic mode */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
-	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
+
+	/* Enable clamping control */
+	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
 
 	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
 			AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
@@ -366,14 +368,14 @@ static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
 			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
 
-	/* It's not clear why they turn off the PGA before enabling the clamp
-	   control, but the Windows trace does it so we will too... */
+	/* It's not clear why we have to have the PGA in automatic mode while
+	   enabling clamp control, but it's what Windows does */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
 
 	/* Enable clamping control */
 	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
 
-	/* Turn on the PGA */
+	/* Disable automatic PGA (since the CVBS is coming from the tuner) */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
 
 	/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
@@ -396,7 +398,10 @@ static void au8522_setup_svideo_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
 			AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
 
-	/* Disable clamping control (required for S-video) */
+	/* PGA in automatic mode */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
+
+	/* Enable clamping control */
 	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
 
 	setup_decoder_defaults(state,
-- 
cgit v1.2.3


From 301c9f26d7ded6e274a99c3a447a9a36790a3f3e Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sun, 27 Jun 2010 18:12:42 -0300
Subject: [media] au8522: Handle differences in comb filter config for s-video
 input

Tweak the comb filter config when in s-video mode to match the Hauppauge
Windows driver values (based on register dumps).

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/au8522_decoder.c | 16 ++++++++++++----
 drivers/media/dvb/frontends/au8522_priv.h    |  2 ++
 2 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 5ec869706409..b537891a4cc9 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -278,10 +278,18 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
 			AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
 	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
 			AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
-			AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
-			AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
+	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
+	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
+	} else {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
+	}
 	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
 			AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
 	au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
diff --git a/drivers/media/dvb/frontends/au8522_priv.h b/drivers/media/dvb/frontends/au8522_priv.h
index 609cf04bc312..751e17d692a9 100644
--- a/drivers/media/dvb/frontends/au8522_priv.h
+++ b/drivers/media/dvb/frontends/au8522_priv.h
@@ -397,7 +397,9 @@ void au8522_release_state(struct au8522_state *state);
 #define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS		0x0A
 #define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS		0x32
 #define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS		0x34
+#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO		0x2a
 #define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS		0x05
+#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO		0x15
 #define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS		0x6E
 #define AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS			0x0F
 #define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS		0x80
-- 
cgit v1.2.3


From 6e04b7b95a5bd2da0aa5df05fc09a1f0d6615666 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Wed, 1 Sep 2010 22:03:43 -0300
Subject: [media] au0828: continue video streaming even when no ITU-656 coming
 in

We need the au0828 to continue delivering frames even when the device is not
delivering video, or else applications such as tvtime will block indefinitely.

Unfortunately, the au8522 doesn't have any sort of free-running mode or "blue
screen on no video" like some other decoders.

This work was sponsored by GetWellNetwork Inc.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-video.c | 61 +++++++++++++++++++++++++++++++
 drivers/media/video/au0828/au0828.h       |  2 +
 2 files changed, 63 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 20ba5915542f..8d11e544c879 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -312,6 +312,9 @@ static inline void buffer_filled(struct au0828_dev *dev,
 
 	list_del(&buf->vb.queue);
 	wake_up(&buf->vb.done);
+
+	/* Reset the timer for "no video condition" */
+	mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
 }
 
 static inline void vbi_buffer_filled(struct au0828_dev *dev,
@@ -329,6 +332,9 @@ static inline void vbi_buffer_filled(struct au0828_dev *dev,
 
 	list_del(&buf->vb.queue);
 	wake_up(&buf->vb.done);
+
+	/* Reset the timer for "no video condition" */
+	mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
 }
 
 /*
@@ -907,6 +913,50 @@ static int get_ressource(struct au0828_fh *fh)
 	}
 }
 
+/* This function ensures that video frames continue to be delivered even if
+   the ITU-656 input isn't receiving any data (thereby preventing applications
+   such as tvtime from hanging) */
+void au0828_vid_buffer_timeout(unsigned long data)
+{
+	struct au0828_dev *dev = (struct au0828_dev *) data;
+	struct au0828_dmaqueue *dma_q = &dev->vidq;
+	struct au0828_buffer *buf;
+	unsigned char *vid_data;
+
+	spin_lock(&dev->slock);
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL) {
+		vid_data = videobuf_to_vmalloc(&buf->vb);
+		memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */
+		buffer_filled(dev, dma_q, buf);
+		get_next_buf(dma_q, &buf);
+	}
+
+	spin_unlock(&dev->slock);
+}
+
+void au0828_vbi_buffer_timeout(unsigned long data)
+{
+	struct au0828_dev *dev = (struct au0828_dev *) data;
+	struct au0828_dmaqueue *dma_q = &dev->vbiq;
+	struct au0828_buffer *buf;
+	unsigned char *vbi_data;
+
+	spin_lock(&dev->slock);
+
+	buf = dev->isoc_ctl.vbi_buf;
+	if (buf != NULL) {
+		vbi_data = videobuf_to_vmalloc(&buf->vb);
+		memset(vbi_data, 0x00, buf->vb.size);
+		vbi_buffer_filled(dev, dma_q, buf);
+		vbi_get_next_buf(dma_q, &buf);
+	}
+
+	spin_unlock(&dev->slock);
+}
+
+
 static int au0828_v4l2_open(struct file *filp)
 {
 	int ret = 0;
@@ -976,6 +1026,15 @@ static int au0828_v4l2_open(struct file *filp)
 				    V4L2_FIELD_SEQ_TB,
 				    sizeof(struct au0828_buffer), fh, NULL);
 
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		dev->vid_timeout.function = au0828_vid_buffer_timeout;
+		dev->vid_timeout.data = (unsigned long) dev;
+		init_timer(&dev->vid_timeout);
+	} else {
+		dev->vbi_timeout.function = au0828_vbi_buffer_timeout;
+		dev->vbi_timeout.data = (unsigned long) dev;
+		init_timer(&dev->vbi_timeout);
+	}
 
 	return ret;
 }
@@ -987,11 +1046,13 @@ static int au0828_v4l2_close(struct file *filp)
 	struct au0828_dev *dev = fh->dev;
 
 	if (res_check(fh, AU0828_RESOURCE_VIDEO)) {
+		del_timer(&dev->vid_timeout);
 		videobuf_stop(&fh->vb_vidq);
 		res_free(fh, AU0828_RESOURCE_VIDEO);
 	}
 
 	if (res_check(fh, AU0828_RESOURCE_VBI)) {
+		del_timer(&dev->vbi_timeout);
 		videobuf_stop(&fh->vb_vbiq);
 		res_free(fh, AU0828_RESOURCE_VBI);
 	}
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 4dd8ce7f139e..ef46a889da20 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -204,6 +204,8 @@ struct au0828_dev {
 	unsigned int resources;	/* resources in use */
 	struct video_device *vdev;
 	struct video_device *vbi_dev;
+	struct timer_list vid_timeout;
+	struct timer_list vbi_timeout;
 	int width;
 	int height;
 	int vbi_width;
-- 
cgit v1.2.3


From 78ca500559b5a4f16a95c198b3e7bdfac8455bf8 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sat, 9 Oct 2010 14:43:53 -0300
Subject: [media] au0828: fixes for timeout on no video

The first pass of fixes to cause the driver to continue streaming even when
there is no video arriving over the ITU656 bus were not adequate.  Continue
the work from the previous patch.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-video.c | 82 ++++++++++++++++++++-----------
 drivers/media/video/au0828/au0828.h       |  2 +
 2 files changed, 56 insertions(+), 28 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 8d11e544c879..cf8fc6274713 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -122,6 +122,7 @@ static void au0828_irq_callback(struct urb *urb)
 {
 	struct au0828_dmaqueue  *dma_q = urb->context;
 	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+	unsigned long flags = 0;
 	int rc, i;
 
 	switch (urb->status) {
@@ -139,9 +140,9 @@ static void au0828_irq_callback(struct urb *urb)
 	}
 
 	/* Copy data from URB */
-	spin_lock(&dev->slock);
+	spin_lock_irqsave(&dev->slock, flags);
 	rc = dev->isoc_ctl.isoc_copy(dev, urb);
-	spin_unlock(&dev->slock);
+	spin_unlock_irqrestore(&dev->slock, flags);
 
 	/* Reset urb buffers */
 	for (i = 0; i < urb->number_of_packets; i++) {
@@ -312,9 +313,6 @@ static inline void buffer_filled(struct au0828_dev *dev,
 
 	list_del(&buf->vb.queue);
 	wake_up(&buf->vb.done);
-
-	/* Reset the timer for "no video condition" */
-	mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
 }
 
 static inline void vbi_buffer_filled(struct au0828_dev *dev,
@@ -332,9 +330,6 @@ static inline void vbi_buffer_filled(struct au0828_dev *dev,
 
 	list_del(&buf->vb.queue);
 	wake_up(&buf->vb.done);
-
-	/* Reset the timer for "no video condition" */
-	mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
 }
 
 /*
@@ -603,6 +598,15 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 					outp = NULL;
 				else
 					outp = videobuf_to_vmalloc(&buf->vb);
+
+				/* As long as isoc traffic is arriving, keep
+				   resetting the timer */
+				if (dev->vid_timeout_running)
+					mod_timer(&dev->vid_timeout,
+						  jiffies + (HZ / 10));
+				if (dev->vbi_timeout_running)
+					mod_timer(&dev->vbi_timeout,
+						  jiffies + (HZ / 10));
 			}
 
 			if (buf != NULL) {
@@ -922,18 +926,22 @@ void au0828_vid_buffer_timeout(unsigned long data)
 	struct au0828_dmaqueue *dma_q = &dev->vidq;
 	struct au0828_buffer *buf;
 	unsigned char *vid_data;
+	unsigned long flags = 0;
 
-	spin_lock(&dev->slock);
+	spin_lock_irqsave(&dev->slock, flags);
 
 	buf = dev->isoc_ctl.buf;
 	if (buf != NULL) {
 		vid_data = videobuf_to_vmalloc(&buf->vb);
 		memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */
 		buffer_filled(dev, dma_q, buf);
-		get_next_buf(dma_q, &buf);
 	}
+	get_next_buf(dma_q, &buf);
+
+	if (dev->vid_timeout_running == 1)
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
 
-	spin_unlock(&dev->slock);
+	spin_unlock_irqrestore(&dev->slock, flags);
 }
 
 void au0828_vbi_buffer_timeout(unsigned long data)
@@ -942,18 +950,21 @@ void au0828_vbi_buffer_timeout(unsigned long data)
 	struct au0828_dmaqueue *dma_q = &dev->vbiq;
 	struct au0828_buffer *buf;
 	unsigned char *vbi_data;
+	unsigned long flags = 0;
 
-	spin_lock(&dev->slock);
+	spin_lock_irqsave(&dev->slock, flags);
 
 	buf = dev->isoc_ctl.vbi_buf;
 	if (buf != NULL) {
 		vbi_data = videobuf_to_vmalloc(&buf->vb);
 		memset(vbi_data, 0x00, buf->vb.size);
 		vbi_buffer_filled(dev, dma_q, buf);
-		vbi_get_next_buf(dma_q, &buf);
 	}
+	vbi_get_next_buf(dma_q, &buf);
 
-	spin_unlock(&dev->slock);
+	if (dev->vbi_timeout_running == 1)
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+	spin_unlock_irqrestore(&dev->slock, flags);
 }
 
 
@@ -1026,16 +1037,6 @@ static int au0828_v4l2_open(struct file *filp)
 				    V4L2_FIELD_SEQ_TB,
 				    sizeof(struct au0828_buffer), fh, NULL);
 
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		dev->vid_timeout.function = au0828_vid_buffer_timeout;
-		dev->vid_timeout.data = (unsigned long) dev;
-		init_timer(&dev->vid_timeout);
-	} else {
-		dev->vbi_timeout.function = au0828_vbi_buffer_timeout;
-		dev->vbi_timeout.data = (unsigned long) dev;
-		init_timer(&dev->vbi_timeout);
-	}
-
 	return ret;
 }
 
@@ -1046,13 +1047,19 @@ static int au0828_v4l2_close(struct file *filp)
 	struct au0828_dev *dev = fh->dev;
 
 	if (res_check(fh, AU0828_RESOURCE_VIDEO)) {
-		del_timer(&dev->vid_timeout);
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vid_timeout_running = 0;
+		del_timer_sync(&dev->vid_timeout);
+
 		videobuf_stop(&fh->vb_vidq);
 		res_free(fh, AU0828_RESOURCE_VIDEO);
 	}
 
 	if (res_check(fh, AU0828_RESOURCE_VBI)) {
-		del_timer(&dev->vbi_timeout);
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vbi_timeout_running = 0;
+		del_timer_sync(&dev->vbi_timeout);
+
 		videobuf_stop(&fh->vb_vbiq);
 		res_free(fh, AU0828_RESOURCE_VBI);
 	}
@@ -1638,10 +1645,15 @@ static int vidioc_streamon(struct file *file, void *priv,
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
 	}
 
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		rc = videobuf_streamon(&fh->vb_vidq);
-	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		dev->vid_timeout_running = 1;
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
 		rc = videobuf_streamon(&fh->vb_vbiq);
+		dev->vbi_timeout_running = 1;
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+	}
 
 	return rc;
 }
@@ -1668,6 +1680,9 @@ static int vidioc_streamoff(struct file *file, void *priv,
 		fh, type, fh->resources, dev->resources);
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		dev->vid_timeout_running = 0;
+		del_timer_sync(&dev->vid_timeout);
+
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
 		rc = au0828_stream_interrupt(dev);
 		if (rc != 0)
@@ -1682,6 +1697,9 @@ static int vidioc_streamoff(struct file *file, void *priv,
 		videobuf_streamoff(&fh->vb_vidq);
 		res_free(fh, AU0828_RESOURCE_VIDEO);
 	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		dev->vbi_timeout_running = 0;
+		del_timer_sync(&dev->vbi_timeout);
+
 		videobuf_streamoff(&fh->vb_vbiq);
 		res_free(fh, AU0828_RESOURCE_VBI);
 	}
@@ -1901,6 +1919,14 @@ int au0828_analog_register(struct au0828_dev *dev,
 	INIT_LIST_HEAD(&dev->vbiq.active);
 	INIT_LIST_HEAD(&dev->vbiq.queued);
 
+	dev->vid_timeout.function = au0828_vid_buffer_timeout;
+	dev->vid_timeout.data = (unsigned long) dev;
+	init_timer(&dev->vid_timeout);
+
+	dev->vbi_timeout.function = au0828_vbi_buffer_timeout;
+	dev->vbi_timeout.data = (unsigned long) dev;
+	init_timer(&dev->vbi_timeout);
+
 	dev->width = NTSC_STD_W;
 	dev->height = NTSC_STD_H;
 	dev->field_size = dev->width * dev->height;
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index ef46a889da20..9cde35321824 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -205,7 +205,9 @@ struct au0828_dev {
 	struct video_device *vdev;
 	struct video_device *vbi_dev;
 	struct timer_list vid_timeout;
+	int vid_timeout_running;
 	struct timer_list vbi_timeout;
+	int vbi_timeout_running;
 	int width;
 	int height;
 	int vbi_width;
-- 
cgit v1.2.3


From bf797165f099296b622bcdcea1126a113e0aaac4 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Sat, 9 Oct 2010 15:09:17 -0300
Subject: [media] au0828: enable VBI timeout when calling read() without
 streamon()

Because some clients (e.g. tvtime) will just open the filehandle and call
read() instead of explicitly calling streamon first, we need to make sure the
VBI timeout routine gets enabled in this case.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-video.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index cf8fc6274713..48682af911fa 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -1116,6 +1116,13 @@ static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf,
 		if (!res_get(fh, AU0828_RESOURCE_VBI))
 			return -EBUSY;
 
+		if (dev->vbi_timeout_running == 0) {
+			/* Handle case where caller tries to read without
+			   calling streamon first */
+			dev->vbi_timeout_running = 1;
+			mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+		}
+
 		return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0,
 					    filp->f_flags & O_NONBLOCK);
 	}
-- 
cgit v1.2.3


From 00df055ae315c9c8792dc4d012e6ad9c4d527e87 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Fri, 29 Oct 2010 11:31:39 -0300
Subject: [media] radio-si4713: Add regulator framework support

Convert the driver to use regulator framework instead of set_power callback.
This with gpio_reset platform data provide cleaner way to manage chip VIO,
VDD and reset signal inside the driver.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/si4713-i2c.c | 74 ++++++++++++++++++++++++++++++++++------
 drivers/media/radio/si4713-i2c.h |  5 ++-
 2 files changed, 67 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index a6e6f1987a3a..0fab6f8f7e24 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
@@ -43,6 +45,11 @@ MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
 MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
 MODULE_VERSION("0.0.1");
 
+static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = {
+	"vio",
+	"vdd",
+};
+
 #define DEFAULT_RDS_PI			0x00
 #define DEFAULT_RDS_PTY			0x00
 #define DEFAULT_RDS_PS_NAME		""
@@ -369,7 +376,17 @@ static int si4713_powerup(struct si4713_device *sdev)
 	if (sdev->power_state)
 		return 0;
 
-	sdev->platform_data->set_power(1);
+	err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
+				    sdev->supplies);
+	if (err) {
+		v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
+		return err;
+	}
+	if (gpio_is_valid(sdev->gpio_reset)) {
+		udelay(50);
+		gpio_set_value(sdev->gpio_reset, 1);
+	}
+
 	err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
 					args, ARRAY_SIZE(args),
 					resp, ARRAY_SIZE(resp),
@@ -384,7 +401,13 @@ static int si4713_powerup(struct si4713_device *sdev)
 		err = si4713_write_property(sdev, SI4713_GPO_IEN,
 						SI4713_STC_INT | SI4713_CTS);
 	} else {
-		sdev->platform_data->set_power(0);
+		if (gpio_is_valid(sdev->gpio_reset))
+			gpio_set_value(sdev->gpio_reset, 0);
+		err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+					     sdev->supplies);
+		if (err)
+			v4l2_err(&sdev->sd,
+				 "Failed to disable supplies: %d\n", err);
 	}
 
 	return err;
@@ -411,7 +434,13 @@ static int si4713_powerdown(struct si4713_device *sdev)
 		v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
 				resp[0]);
 		v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
-		sdev->platform_data->set_power(0);
+		if (gpio_is_valid(sdev->gpio_reset))
+			gpio_set_value(sdev->gpio_reset, 0);
+		err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+					     sdev->supplies);
+		if (err)
+			v4l2_err(&sdev->sd,
+				 "Failed to disable supplies: %d\n", err);
 		sdev->power_state = POWER_OFF;
 	}
 
@@ -1967,7 +1996,8 @@ static int si4713_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct si4713_device *sdev;
-	int rval;
+	struct si4713_platform_data *pdata = client->dev.platform_data;
+	int rval, i;
 
 	sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
 	if (!sdev) {
@@ -1976,11 +2006,26 @@ static int si4713_probe(struct i2c_client *client,
 		goto exit;
 	}
 
-	sdev->platform_data = client->dev.platform_data;
-	if (!sdev->platform_data) {
-		v4l2_err(&sdev->sd, "No platform data registered.\n");
-		rval = -ENODEV;
-		goto free_sdev;
+	sdev->gpio_reset = -1;
+	if (pdata && gpio_is_valid(pdata->gpio_reset)) {
+		rval = gpio_request(pdata->gpio_reset, "si4713 reset");
+		if (rval) {
+			dev_err(&client->dev,
+				"Failed to request gpio: %d\n", rval);
+			goto free_sdev;
+		}
+		sdev->gpio_reset = pdata->gpio_reset;
+		gpio_direction_output(sdev->gpio_reset, 0);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++)
+		sdev->supplies[i].supply = si4713_supply_names[i];
+
+	rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies),
+				  sdev->supplies);
+	if (rval) {
+		dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
+		goto free_gpio;
 	}
 
 	v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
@@ -1994,7 +2039,7 @@ static int si4713_probe(struct i2c_client *client,
 			client->name, sdev);
 		if (rval < 0) {
 			v4l2_err(&sdev->sd, "Could not request IRQ\n");
-			goto free_sdev;
+			goto put_reg;
 		}
 		v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
 	} else {
@@ -2012,6 +2057,11 @@ static int si4713_probe(struct i2c_client *client,
 free_irq:
 	if (client->irq)
 		free_irq(client->irq, sdev);
+put_reg:
+	regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+free_gpio:
+	if (gpio_is_valid(sdev->gpio_reset))
+		gpio_free(sdev->gpio_reset);
 free_sdev:
 	kfree(sdev);
 exit:
@@ -2031,7 +2081,9 @@ static int si4713_remove(struct i2c_client *client)
 		free_irq(client->irq, sdev);
 
 	v4l2_device_unregister_subdev(sd);
-
+	regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+	if (gpio_is_valid(sdev->gpio_reset))
+		gpio_free(sdev->gpio_reset);
 	kfree(sdev);
 
 	return 0;
diff --git a/drivers/media/radio/si4713-i2c.h b/drivers/media/radio/si4713-i2c.h
index faf8cff124f1..c6dfa7fb101c 100644
--- a/drivers/media/radio/si4713-i2c.h
+++ b/drivers/media/radio/si4713-i2c.h
@@ -211,6 +211,8 @@ struct acomp_info {
 	u32 enabled;
 };
 
+#define SI4713_NUM_SUPPLIES		2
+
 /*
  * si4713_device - private data
  */
@@ -220,11 +222,12 @@ struct si4713_device {
 	/* private data structures */
 	struct mutex mutex;
 	struct completion work;
-	struct si4713_platform_data *platform_data;
 	struct rds_info rds_info;
 	struct limiter_info limiter_info;
 	struct pilot_info pilot_info;
 	struct acomp_info acomp_info;
+	struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES];
+	int gpio_reset;
 	u32 frequency;
 	u32 preemphasis;
 	u32 mute;
-- 
cgit v1.2.3


From 2997137be8eba5bf9c07a24d5fda1f4225f9ca7d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=A4rdeman?= <david@hardeman.nu>
Date: Fri, 29 Oct 2010 16:08:02 -0300
Subject: [media] ir-core: convert drivers/media/video/cx88 to ir-core
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch converts the cx88 driver (for sampling hw) to use the
decoders provided by ir-core instead of the separate ones provided
by ir-functions (and gets rid of those).

The value for MO_DDS_IO had a comment saying it corresponded to
a 4kHz samplerate. That comment was unfortunately misleading. The
actual samplerate was something like 3250Hz.

The current value has been derived by analyzing the elapsed time
between interrupts for different values (knowing that each interrupt
corresponds to 32 samples).

Thanks to Mariusz Bialonczyk <manio@skyboo.net> for testing my patches
(about one a day for two weeks!) on actual hardware.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/IR/ir-functions.c       | 134 ----------------------------
 drivers/media/video/cx88/Kconfig      |   2 +-
 drivers/media/video/cx88/cx88-input.c | 163 ++++++++--------------------------
 3 files changed, 37 insertions(+), 262 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index db591e421887..f4c411535f3d 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -111,140 +111,6 @@ u32 ir_extract_bits(u32 data, u32 mask)
 }
 EXPORT_SYMBOL_GPL(ir_extract_bits);
 
-static int inline getbit(u32 *samples, int bit)
-{
-	return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
-}
-
-/* sump raw samples for visual debugging ;) */
-int ir_dump_samples(u32 *samples, int count)
-{
-	int i, bit, start;
-
-	printk(KERN_DEBUG "ir samples: ");
-	start = 0;
-	for (i = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit)
-			start = 1;
-		if (0 == start)
-			continue;
-		printk("%s", bit ? "#" : "_");
-	}
-	printk("\n");
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_dump_samples);
-
-/* decode raw samples, pulse distance coding used by NEC remotes */
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high)
-{
-	int i,last,bit,len;
-	u32 curBit;
-	u32 value;
-
-	/* find start burst */
-	for (i = len = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit) {
-			len++;
-		} else {
-			if (len >= 29)
-				break;
-			len = 0;
-		}
-	}
-
-	/* start burst to short */
-	if (len < 29)
-		return 0xffffffff;
-
-	/* find start silence */
-	for (len = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit) {
-			break;
-		} else {
-			len++;
-		}
-	}
-
-	/* silence to short */
-	if (len < 7)
-		return 0xffffffff;
-
-	/* go decoding */
-	len   = 0;
-	last = 1;
-	value = 0; curBit = 1;
-	for (; i < count * 32; i++) {
-		bit  = getbit(samples,i);
-		if (last) {
-			if(bit) {
-				continue;
-			} else {
-				len = 1;
-			}
-		} else {
-			if (bit) {
-				if (len > (low + high) /2)
-					value |= curBit;
-				curBit <<= 1;
-				if (curBit == 1)
-					break;
-			} else {
-				len++;
-			}
-		}
-		last = bit;
-	}
-
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
-
-/* decode raw samples, biphase coding, used by rc5 for example */
-int ir_decode_biphase(u32 *samples, int count, int low, int high)
-{
-	int i,last,bit,len,flips;
-	u32 value;
-
-	/* find start bit (1) */
-	for (i = 0; i < 32; i++) {
-		bit = getbit(samples,i);
-		if (bit)
-			break;
-	}
-
-	/* go decoding */
-	len   = 0;
-	flips = 0;
-	value = 1;
-	for (; i < count * 32; i++) {
-		if (len > high)
-			break;
-		if (flips > 1)
-			break;
-		last = bit;
-		bit  = getbit(samples,i);
-		if (last == bit) {
-			len++;
-			continue;
-		}
-		if (len < low) {
-			len++;
-			flips++;
-			continue;
-		}
-		value <<= 1;
-		value |= bit;
-		flips = 0;
-		len   = 1;
-	}
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_biphase);
-
 /* RC5 decoding stuff, moved from bttv-input.c to share it with
  * saa7134 */
 
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0fa85cbefbb1..bcfd1ac48cc6 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C && INPUT
+	depends on VIDEO_DEV && PCI && I2C && INPUT && IR_CORE
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index fc777bc6e716..436ace8196a5 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -41,7 +41,6 @@ struct cx88_IR {
 	struct cx88_core *core;
 	struct input_dev *input;
 	struct ir_dev_props props;
-	u64 ir_type;
 
 	int users;
 
@@ -50,8 +49,6 @@ struct cx88_IR {
 
 	/* sample from gpio pin 16 */
 	u32 sampling;
-	u32 samples[16];
-	int scount;
 
 	/* poll external decoder */
 	int polling;
@@ -63,6 +60,10 @@ struct cx88_IR {
 	u32 mask_keyup;
 };
 
+static unsigned ir_samplerate = 4;
+module_param(ir_samplerate, uint, 0444);
+MODULE_PARM_DESC(ir_samplerate, "IR samplerate in kHz, 1 - 20, default 4");
+
 static int ir_debug;
 module_param(ir_debug, int, 0644);	/* debug level [IR] */
 MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
@@ -176,8 +177,8 @@ static int __cx88_ir_start(void *priv)
 	}
 	if (ir->sampling) {
 		core->pci_irqmask |= PCI_INT_IR_SMPINT;
-		cx_write(MO_DDS_IO, 0xa80a80);	/* 4 kHz sample rate */
-		cx_write(MO_DDSCFG_IO, 0x5);	/* enable */
+		cx_write(MO_DDS_IO, 0x33F286 * ir_samplerate); /* samplerate */
+		cx_write(MO_DDSCFG_IO, 0x5); /* enable */
 	}
 	return 0;
 }
@@ -264,7 +265,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
 		ir_codes = RC_MAP_CINERGY_1400;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xeb04; /* address */
 		break;
 	case CX88_BOARD_HAUPPAUGE:
@@ -279,7 +279,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_PCHDTV_HD5500:
 	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ir_codes = RC_MAP_HAUPPAUGE_NEW;
-		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
 		break;
 	case CX88_BOARD_WINFAST_DTV2000H:
@@ -367,18 +366,15 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_PROF_7301:
 	case CX88_BOARD_PROF_6200:
 		ir_codes = RC_MAP_TBS_NEC;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xff00; /* address */
 		break;
 	case CX88_BOARD_TEVII_S460:
 	case CX88_BOARD_TEVII_S420:
 		ir_codes = RC_MAP_TEVII_NEC;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xff00; /* address */
 		break;
 	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
 		ir_codes         = RC_MAP_DNTV_LIVE_DVBT_PRO;
-		ir_type          = IR_TYPE_NEC;
 		ir->sampling     = 0xff00; /* address */
 		break;
 	case CX88_BOARD_NORWOOD_MICRO:
@@ -396,7 +392,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ir_codes         = RC_MAP_PINNACLE_PCTV_HD;
-		ir_type          = IR_TYPE_RC5;
 		ir->sampling     = 1;
 		break;
 	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
@@ -412,7 +407,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	}
 
-	if (NULL == ir_codes) {
+	if (!ir_codes) {
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -436,8 +431,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
 
-	ir->ir_type = ir_type;
-
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_PCI;
@@ -454,10 +447,18 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	ir->core = core;
 	core->ir = ir;
 
+	if (ir->sampling) {
+		ir_type = IR_TYPE_ALL;
+		ir->props.driver_type = RC_DRIVER_IR_RAW;
+		ir->props.timeout = 10 * 1000 * 1000; /* 10 ms */
+	} else
+		ir->props.driver_type = RC_DRIVER_SCANCODE;
+
 	ir->props.priv = core;
 	ir->props.open = cx88_ir_open;
 	ir->props.close = cx88_ir_close;
 	ir->props.scanmask = hardware_mask;
+	ir->props.allowed_protos = ir_type;
 
 	/* all done */
 	err = ir_input_register(ir->input, ir_codes, &ir->props, MODULE_NAME);
@@ -494,128 +495,36 @@ int cx88_ir_fini(struct cx88_core *core)
 void cx88_ir_irq(struct cx88_core *core)
 {
 	struct cx88_IR *ir = core->ir;
-	u32 samples, ircode;
-	int i, start, range, toggle, dev, code;
+	u32 samples;
+	unsigned todo, bits;
+	struct ir_raw_event ev;
+	struct ir_input_dev *irdev;
 
-	if (NULL == ir)
-		return;
-	if (!ir->sampling)
+	if (!ir || !ir->sampling)
 		return;
 
+	/*
+	 * Samples are stored in a 32 bit register, oldest sample in
+	 * the msb. A set bit represents space and an unset bit
+	 * represents a pulse.
+	 */
 	samples = cx_read(MO_SAMPLE_IO);
-	if (0 != samples && 0xffffffff != samples) {
-		/* record sample data */
-		if (ir->scount < ARRAY_SIZE(ir->samples))
-			ir->samples[ir->scount++] = samples;
-		return;
-	}
-	if (!ir->scount) {
-		/* nothing to sample */
-		return;
-	}
-
-	/* have a complete sample */
-	if (ir->scount < ARRAY_SIZE(ir->samples))
-		ir->samples[ir->scount++] = samples;
-	for (i = 0; i < ir->scount; i++)
-		ir->samples[i] = ~ir->samples[i];
-	if (ir_debug)
-		ir_dump_samples(ir->samples, ir->scount);
-
-	/* decode it */
-	switch (core->boardnr) {
-	case CX88_BOARD_TEVII_S460:
-	case CX88_BOARD_TEVII_S420:
-	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
-	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
-	case CX88_BOARD_OMICOM_SS4_PCI:
-	case CX88_BOARD_SATTRADE_ST4200:
-	case CX88_BOARD_TBS_8920:
-	case CX88_BOARD_TBS_8910:
-	case CX88_BOARD_PROF_7300:
-	case CX88_BOARD_PROF_7301:
-	case CX88_BOARD_PROF_6200:
-	case CX88_BOARD_TWINHAN_VP1027_DVBS:
-		ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
-
-		if (ircode == 0xffffffff) { /* decoding error */
-			ir_dprintk("pulse distance decoding error\n");
-			break;
-		}
-
-		ir_dprintk("pulse distance decoded: %x\n", ircode);
+       	irdev = input_get_drvdata(ir->input);
 
-		if (ircode == 0) { /* key still pressed */
-			ir_dprintk("pulse distance decoded repeat code\n");
-			ir_repeat(ir->input);
-			break;
-		}
-
-		if ((ircode & 0xffff) != (ir->sampling & 0xffff)) { /* wrong address */
-			ir_dprintk("pulse distance decoded wrong address\n");
-			break;
-		}
-
-		if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */
-			ir_dprintk("pulse distance decoded wrong check sum\n");
-			break;
-		}
+	if (samples == 0xff && irdev->idle)
+		return;
 
-		ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0xff);
-		ir_keydown(ir->input, (ircode >> 16) & 0xff, 0);
-		break;
-	case CX88_BOARD_HAUPPAUGE:
-	case CX88_BOARD_HAUPPAUGE_DVB_T1:
-	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
-	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
-	case CX88_BOARD_HAUPPAUGE_HVR1100:
-	case CX88_BOARD_HAUPPAUGE_HVR3000:
-	case CX88_BOARD_HAUPPAUGE_HVR4000:
-	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
-	case CX88_BOARD_PCHDTV_HD3000:
-	case CX88_BOARD_PCHDTV_HD5500:
-	case CX88_BOARD_HAUPPAUGE_IRONLY:
-		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
-		ir_dprintk("biphase decoded: %x\n", ircode);
-		/*
-		 * RC5 has an extension bit which adds a new range
-		 * of available codes, this is detected here. Also
-		 * hauppauge remotes (black/silver) always use
-		 * specific device ids. If we do not filter the
-		 * device ids then messages destined for devices
-		 * such as TVs (id=0) will get through to the
-		 * device causing mis-fired events.
-		 */
-		/* split rc5 data block ... */
-		start = (ircode & 0x2000) >> 13;
-		range = (ircode & 0x1000) >> 12;
-		toggle= (ircode & 0x0800) >> 11;
-		dev   = (ircode & 0x07c0) >> 6;
-		code  = (ircode & 0x003f) | ((range << 6) ^ 0x0040);
-		if( start != 1)
-			/* no key pressed */
-			break;
-		if ( dev != 0x1e && dev != 0x1f )
-			/* not a hauppauge remote */
-			break;
-		ir_keydown(ir->input, code, toggle);
-		break;
-	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
-		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
-		ir_dprintk("biphase decoded: %x\n", ircode);
-		if ((ircode & 0xfffff000) != 0x3000)
-			break;
-		/* Note: bit 0x800 being the toggle is assumed, not checked
-		   with real hardware  */
-		ir_keydown(ir->input, ircode & 0x3f, ircode & 0x0800 ? 1 : 0);
-		break;
+	init_ir_raw_event(&ev);
+	for (todo = 32; todo > 0; todo -= bits) {
+		ev.pulse = samples & 0x80000000 ? false : true;
+		bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
+		ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
+		ir_raw_event_store_with_filter(ir->input, &ev);
+		samples <<= bits;
 	}
-
-	ir->scount = 0;
-	return;
+	ir_raw_event_handle(ir->input);
 }
 
-
 void cx88_i2c_init_ir(struct cx88_core *core)
 {
 	struct i2c_board_info info;
-- 
cgit v1.2.3


From 62c6503125389763a74911408d984c5dd09eeb97 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 29 Oct 2010 16:08:07 -0300
Subject: [media] ir-core: remove remaining users of the ir-functions
 keyhandlers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch removes the remaining usages of the ir_input_nokey() and
ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c
by using the corresponding functionality in ir-core instead.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/IR/imon.c                     |   9 +--
 drivers/media/IR/ir-functions.c             | 101 +++----------------------
 drivers/media/IR/ir-keytable.c              | 110 +++++++++++++++++++++-------
 drivers/media/video/bt8xx/bttv-input.c      |  32 +++-----
 drivers/media/video/bt8xx/bttvp.h           |   1 -
 drivers/media/video/cx88/cx88-input.c       |  11 ++-
 drivers/media/video/ir-kbd-i2c.c            |   3 +-
 drivers/media/video/saa7134/saa7134-input.c |  49 +++----------
 8 files changed, 122 insertions(+), 194 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index bc118066bc38..79f4f58c2ea4 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -1479,17 +1479,12 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	bool norelease = false;
 	int i;
 	u64 scancode;
-	struct input_dev *rdev = NULL;
-	struct ir_input_dev *irdev = NULL;
 	int press_type = 0;
 	int msec;
 	struct timeval t;
 	static struct timeval prev_time = { 0, 0 };
 	u8 ktype;
 
-	rdev = ictx->rdev;
-	irdev = input_get_drvdata(rdev);
-
 	/* filter out junk data on the older 0xffdc imon devices */
 	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
 		return;
@@ -1570,9 +1565,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 
 	if (ktype != IMON_KEY_PANEL) {
 		if (press_type == 0)
-			ir_keyup(irdev);
+			ir_keyup(ictx->rdev);
 		else {
-			ir_keydown(rdev, ictx->rc_scancode, ictx->rc_toggle);
+			ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
 			spin_lock_irqsave(&ictx->kc_lock, flags);
 			ictx->last_keycode = ictx->kc;
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index f4c411535f3d..fca734c43e8d 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -1,7 +1,7 @@
 /*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
+ * some common functions to handle infrared remote protocol decoding for
+ * drivers which have not yet been (or can't be) converted to use the
+ * regular protocol decoders...
  *
  * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
  *
@@ -31,67 +31,6 @@
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
 
-static int repeat = 1;
-module_param(repeat, int, 0444);
-MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-
-/* -------------------------------------------------------------------------- */
-
-static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
-{
-	if (KEY_RESERVED == ir->keycode) {
-		printk(KERN_INFO "%s: unknown key: key=0x%02x down=%d\n",
-		       dev->name, ir->ir_key, ir->keypressed);
-		return;
-	}
-	IR_dprintk(1,"%s: key event code=%d down=%d\n",
-		dev->name,ir->keycode,ir->keypressed);
-	input_report_key(dev,ir->keycode,ir->keypressed);
-	input_sync(dev);
-}
-
-/* -------------------------------------------------------------------------- */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
-		  const u64 ir_type)
-{
-	ir->ir_type = ir_type;
-
-	if (repeat)
-		set_bit(EV_REP, dev->evbit);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_input_init);
-
-
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
-{
-	if (ir->keypressed) {
-		ir->keypressed = 0;
-		ir_input_key_event(dev,ir);
-	}
-}
-EXPORT_SYMBOL_GPL(ir_input_nokey);
-
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
-		      u32 ir_key)
-{
-	u32 keycode = ir_g_keycode_from_table(dev, ir_key);
-
-	if (ir->keypressed && ir->keycode != keycode) {
-		ir->keypressed = 0;
-		ir_input_key_event(dev,ir);
-	}
-	if (!ir->keypressed) {
-		ir->ir_key  = ir_key;
-		ir->keycode = keycode;
-		ir->keypressed = 1;
-		ir_input_key_event(dev,ir);
-	}
-}
-EXPORT_SYMBOL_GPL(ir_input_keydown);
-
 /* -------------------------------------------------------------------------- */
 /* extract mask bits out of data and pack them into the result */
 u32 ir_extract_bits(u32 data, u32 mask)
@@ -115,7 +54,7 @@ EXPORT_SYMBOL_GPL(ir_extract_bits);
  * saa7134 */
 
 /* decode raw bit pattern to RC5 code */
-u32 ir_rc5_decode(unsigned int code)
+static u32 ir_rc5_decode(unsigned int code)
 {
 	unsigned int org_code = code;
 	unsigned int pair;
@@ -144,13 +83,12 @@ u32 ir_rc5_decode(unsigned int code)
 		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
 	return rc5;
 }
-EXPORT_SYMBOL_GPL(ir_rc5_decode);
 
 void ir_rc5_timer_end(unsigned long data)
 {
 	struct card_ir *ir = (struct card_ir *)data;
 	struct timeval tv;
-	unsigned long current_jiffies, timeout;
+	unsigned long current_jiffies;
 	u32 gap;
 	u32 rc5 = 0;
 
@@ -191,32 +129,11 @@ void ir_rc5_timer_end(unsigned long data)
 			u32 toggle = RC5_TOGGLE(rc5);
 			u32 instr = RC5_INSTR(rc5);
 
-			/* Good code, decide if repeat/repress */
-			if (toggle != RC5_TOGGLE(ir->last_rc5) ||
-			    instr != RC5_INSTR(ir->last_rc5)) {
-				IR_dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
-					toggle);
-				ir_input_nokey(ir->dev, &ir->ir);
-				ir_input_keydown(ir->dev, &ir->ir, instr);
-			}
-
-			/* Set/reset key-up timer */
-			timeout = current_jiffies +
-				  msecs_to_jiffies(ir->rc5_key_timeout);
-			mod_timer(&ir->timer_keyup, timeout);
-
-			/* Save code for repeat test */
-			ir->last_rc5 = rc5;
+			/* Good code */
+			ir_keydown(ir->dev, instr, toggle);
+			IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
+				   instr, toggle);
 		}
 	}
 }
 EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
-
-void ir_rc5_timer_keyup(unsigned long data)
-{
-	struct card_ir *ir = (struct card_ir *)data;
-
-	IR_dprintk(1, "ir-common: key released\n");
-	ir_input_nokey(ir->dev, &ir->ir);
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index f60107c3b091..8039110350d3 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -431,13 +431,13 @@ u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
 EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
 
 /**
- * ir_keyup() - generates input event to cleanup a key press
+ * ir_do_keyup() - internal function to signal the release of a keypress
  * @ir:         the struct ir_input_dev descriptor of the device
  *
- * This routine is used to signal that a key has been released on the
- * remote control. It reports a keyup input event via input_report_key().
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
  */
-void ir_keyup(struct ir_input_dev *ir)
+static void ir_do_keyup(struct ir_input_dev *ir)
 {
 	if (!ir->keypressed)
 		return;
@@ -447,6 +447,23 @@ void ir_keyup(struct ir_input_dev *ir)
 	input_sync(ir->input_dev);
 	ir->keypressed = false;
 }
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev:        the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keyup(ir);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
 EXPORT_SYMBOL_GPL(ir_keyup);
 
 /**
@@ -473,7 +490,7 @@ static void ir_timer_keyup(unsigned long cookie)
 	 */
 	spin_lock_irqsave(&ir->keylock, flags);
 	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
-		ir_keyup(ir);
+		ir_do_keyup(ir);
 	spin_unlock_irqrestore(&ir->keylock, flags);
 }
 
@@ -506,44 +523,37 @@ out:
 EXPORT_SYMBOL_GPL(ir_repeat);
 
 /**
- * ir_keydown() - generates input event for a key press
+ * ir_do_keydown() - internal function to process a keypress
  * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
+ * @scancode:   the scancode of the keypress
+ * @keycode:    the keycode of the keypress
+ * @toggle:     the toggle value of the keypress
  *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
  */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+			  u32 keycode, u8 toggle)
 {
-	unsigned long flags;
 	struct ir_input_dev *ir = input_get_drvdata(dev);
 
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-
 	input_event(dev, EV_MSC, MSC_SCAN, scancode);
 
 	/* Repeat event? */
 	if (ir->keypressed &&
 	    ir->last_scancode == scancode &&
 	    ir->last_toggle == toggle)
-		goto set_timer;
+		return;
 
 	/* Release old keypress */
-	ir_keyup(ir);
+	ir_do_keyup(ir);
 
 	ir->last_scancode = scancode;
 	ir->last_toggle = toggle;
 	ir->last_keycode = keycode;
 
-
 	if (keycode == KEY_RESERVED)
-		goto out;
-
+		return;
 
 	/* Register a keypress */
 	ir->keypressed = true;
@@ -551,15 +561,61 @@ void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
 		   dev->name, keycode, scancode);
 	input_report_key(dev, ir->last_keycode, 1);
 	input_sync(dev);
+}
 
-set_timer:
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-out:
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+
+	if (ir->keypressed) {
+		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+	}
 	spin_unlock_irqrestore(&ir->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_keydown);
 
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ *                          an automatic keyup event at a later time
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
 static int ir_open(struct input_dev *input_dev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 6bf05a7dc5f9..eb71c3ae36de 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -38,8 +38,6 @@ module_param(repeat_period, int, 0644);
 
 static int ir_rc5_remote_gap = 885;
 module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 200;
-module_param(ir_rc5_key_timeout, int, 0644);
 
 #undef dprintk
 #define dprintk(arg...) do {	\
@@ -74,18 +72,17 @@ static void ir_handle_key(struct bttv *btv)
 		(gpio & ir->mask_keydown) ? " down" : "",
 		(gpio & ir->mask_keyup)   ? " up"   : "");
 
-	if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
-	    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-		ir_input_keydown(ir->dev, &ir->ir, data);
+	if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
+	    (ir->mask_keyup   && !(gpio & ir->mask_keyup))) {
+		ir_keydown_notimeout(ir->dev, data, 0);
 	} else {
 		/* HACK: Probably, ir->mask_keydown is missing
 		   for this board */
 		if (btv->c.type == BTTV_BOARD_WINFAST2000)
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			ir_keydown_notimeout(ir->dev, data, 0);
 
-		ir_input_nokey(ir->dev,&ir->ir);
+		ir_keyup(ir->dev);
 	}
-
 }
 
 static void ir_enltv_handle_key(struct bttv *btv)
@@ -107,9 +104,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			gpio, data,
 			(gpio & ir->mask_keyup) ? " up" : "up/down");
 
-		ir_input_keydown(ir->dev, &ir->ir, data);
+		ir_keydown_notimeout(ir->dev, data, 0);
 		if (keyup)
-			ir_input_nokey(ir->dev, &ir->ir);
+			ir_keyup(ir->dev);
 	} else {
 		if ((ir->last_gpio & 1 << 31) == keyup)
 			return;
@@ -119,9 +116,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			(gpio & ir->mask_keyup) ? " up" : "down");
 
 		if (keyup)
-			ir_input_nokey(ir->dev, &ir->ir);
+			ir_keyup(ir->dev);
 		else
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			ir_keydown_notimeout(ir->dev, data, 0);
 	}
 
 	ir->last_gpio = data | keyup;
@@ -215,14 +212,9 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 		init_timer(&ir->timer_end);
 		ir->timer_end.function = ir_rc5_timer_end;
 		ir->timer_end.data = (unsigned long)ir;
-
-		init_timer(&ir->timer_keyup);
-		ir->timer_keyup.function = ir_rc5_timer_keyup;
-		ir->timer_keyup.data = (unsigned long)ir;
 		ir->shift_by = 1;
 		ir->start = 3;
 		ir->addr = 0x0;
-		ir->rc5_key_timeout = ir_rc5_key_timeout;
 		ir->rc5_remote_gap = ir_rc5_remote_gap;
 	}
 }
@@ -290,7 +282,6 @@ void __devinit init_bttv_i2c_ir(struct bttv *btv)
 		btv->init_data.name = "PV951";
 		btv->init_data.get_key = get_key_pv951;
 		btv->init_data.ir_codes = RC_MAP_PV951;
-		btv->init_data.type = IR_TYPE_OTHER;
 		info.addr = 0x4b;
 		break;
 	default:
@@ -327,7 +318,6 @@ int bttv_input_init(struct bttv *btv)
 	struct card_ir *ir;
 	char *ir_codes = NULL;
 	struct input_dev *input_dev;
-	u64 ir_type = IR_TYPE_OTHER;
 	int err = -ENOMEM;
 
 	if (!btv->has_remote)
@@ -448,10 +438,6 @@ int bttv_input_init(struct bttv *btv)
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(btv->c.pci));
 
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
-
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_PCI;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index d1e26a448ed2..157285b434c9 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -305,7 +305,6 @@ struct bttv_pll_info {
 /* for gpio-connected remote control */
 struct bttv_input {
 	struct input_dev      *dev;
-	struct ir_input_state ir;
 	char                  name[32];
 	char                  phys[32];
 	u32                   mask_keycode;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 436ace8196a5..564e3cb29c4d 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -131,16 +131,21 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 	} else if (ir->mask_keydown) {
 		/* bit set on keydown */
 		if (gpio & ir->mask_keydown)
-			ir_keydown(ir->input, data, 0);
+			ir_keydown_notimeout(ir->input, data, 0);
+		else
+			ir_keyup(ir->input);
 
 	} else if (ir->mask_keyup) {
 		/* bit cleared on keydown */
 		if (0 == (gpio & ir->mask_keyup))
-			ir_keydown(ir->input, data, 0);
+			ir_keydown_notimeout(ir->input, data, 0);
+		else
+			ir_keyup(ir->input);
 
 	} else {
 		/* can't distinguish keydown/up :-/ */
-		ir_keydown(ir->input, data, 0);
+		ir_keydown_notimeout(ir->input, data, 0);
+		ir_keyup(ir->input);
 	}
 }
 
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index ce4a75375909..a78883a6e0e7 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -269,7 +269,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	char *ir_codes = NULL;
 	const char *name = NULL;
-	u64 ir_type = 0;
+	u64 ir_type = IR_TYPE_UNKNOWN;
 	struct IR_i2c *ir;
 	struct input_dev *input_dev;
 	struct i2c_adapter *adap = client->adapter;
@@ -383,7 +383,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 dev_name(&client->dev));
 
 	/* init + register input device */
-	ir->ir_type = ir_type;
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->name       = ir->name;
 	input_dev->phys       = ir->phys;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index b6c682f0acec..3e37593a328f 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -44,8 +44,6 @@ MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=g
 
 static int ir_rc5_remote_gap = 885;
 module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 115;
-module_param(ir_rc5_key_timeout, int, 0644);
 
 static int repeat_delay = 500;
 module_param(repeat_delay, int, 0644);
@@ -70,7 +68,6 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev);
 static int saa7134_nec_irq(struct saa7134_dev *dev);
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
 static void nec_task(unsigned long data);
-static void saa7134_nec_timer(unsigned long data);
 
 /* -------------------- GPIO generic keycode builder -------------------- */
 
@@ -104,25 +101,25 @@ static int build_key(struct saa7134_dev *dev)
 	switch (dev->board) {
 	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 		if (data == ir->mask_keycode)
-			ir_input_nokey(ir->dev, &ir->ir);
+			ir_keyup(ir->dev);
 		else
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			ir_keydown_notimeout(ir->dev, data, 0);
 		return 0;
 	}
 
 	if (ir->polling) {
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			ir_keydown_notimeout(ir->dev, data, 0);
 		} else {
-			ir_input_nokey(ir->dev, &ir->ir);
+			ir_keyup(ir->dev);
 		}
 	}
 	else {	/* IRQ driven mode - handle key press and release in one go */
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_input_keydown(ir->dev, &ir->ir, data);
-			ir_input_nokey(ir->dev, &ir->ir);
+			ir_keydown_notimeout(ir->dev, data, 0);
+			ir_keyup(ir->dev);
 		}
 	}
 
@@ -465,17 +462,11 @@ static int __saa7134_ir_start(void *priv)
 		init_timer(&ir->timer_end);
 		ir->timer_end.function = ir_rc5_timer_end;
 		ir->timer_end.data = (unsigned long)ir;
-		init_timer(&ir->timer_keyup);
-		ir->timer_keyup.function = ir_rc5_timer_keyup;
-		ir->timer_keyup.data = (unsigned long)ir;
 		ir->shift_by = 2;
 		ir->start = 0x2;
 		ir->addr = 0x17;
-		ir->rc5_key_timeout = ir_rc5_key_timeout;
 		ir->rc5_remote_gap = ir_rc5_remote_gap;
 	} else if (ir->nec_gpio) {
-		setup_timer(&ir->timer_keyup, saa7134_nec_timer,
-			    (unsigned long)dev);
 		tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
@@ -596,7 +587,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	int nec_gpio	 = 0;
 	int raw_decode   = 0;
 	int allow_protocol_change = 0;
-	u64 ir_type = IR_TYPE_OTHER;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -871,10 +861,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		ir->props.change_protocol = saa7134_ir_change_protocol;
 	}
 
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
-
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_PCI;
@@ -1092,20 +1078,6 @@ static int saa7134_rc5_irq(struct saa7134_dev *dev)
 	return 1;
 }
 
-/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms
-   The first pulse (start) has 9 + 4.5 ms
- */
-
-static void saa7134_nec_timer(unsigned long data)
-{
-	struct saa7134_dev *dev = (struct saa7134_dev *) data;
-	struct card_ir *ir = dev->remote;
-
-	dprintk("Cancel key repeat\n");
-
-	ir_input_nokey(ir->dev, &ir->ir);
-}
-
 static void nec_task(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev *) data;
@@ -1194,12 +1166,11 @@ static void nec_task(unsigned long data)
 		dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
 			 ir->code, ircode, not_code);
 
-		ir_input_keydown(ir->dev, &ir->ir, ir->code);
-	} else
+		ir_keydown(ir->dev, ir->code, 0);
+	} else {
 		dprintk("Repeat last key\n");
-
-	/* Keep repeating the last key */
-	mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150));
+		ir_repeat(ir->dev);
+	}
 
 	saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
 }
-- 
cgit v1.2.3


From 3ffea4988be3f3fa65f2104ba31eff2b5e0e82a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 29 Oct 2010 16:08:12 -0300
Subject: [media] ir-core: more cleanups of ir-functions.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

cx88 only depends on VIDEO_IR because it needs ir_extract_bits().
Move that function to ir-core.h and make it inline.

Lots of drivers had dependencies on VIDEO_IR when they really
wanted IR_CORE.

The only remaining drivers to depend on VIDEO_IR are bt8xx and
saa7134 (ir_rc5_timer_end is the only function exported by
ir-functions).

Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or
converting drivers to IR_CORE that they do not want a dependency
on IR_LEGACY.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/IR/Kconfig              |  2 +-
 drivers/media/IR/Makefile             |  2 +-
 drivers/media/IR/ir-functions.c       | 19 -------------------
 drivers/media/dvb/dm1105/Kconfig      |  3 +--
 drivers/media/dvb/ttpci/Kconfig       |  3 +--
 drivers/media/video/Kconfig           |  2 +-
 drivers/media/video/bt8xx/Kconfig     |  4 ++--
 drivers/media/video/cx18/Kconfig      |  3 +--
 drivers/media/video/cx231xx/Kconfig   |  4 ++--
 drivers/media/video/cx88/Kconfig      |  3 +--
 drivers/media/video/cx88/cx88-input.c |  1 -
 drivers/media/video/em28xx/Kconfig    |  4 ++--
 drivers/media/video/ivtv/Kconfig      |  3 +--
 drivers/media/video/saa7134/Kconfig   |  2 +-
 drivers/media/video/tlg2300/Kconfig   |  4 ++--
 15 files changed, 17 insertions(+), 42 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index aa4163eb7a83..20e02a0a5e48 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -10,7 +10,7 @@ menuconfig IR_CORE
 	  if you don't need IR, as otherwise, you may not be able to
 	  compile the driver for your adapter.
 
-config VIDEO_IR
+config IR_LEGACY
 	tristate
 	depends on IR_CORE
 	default IR_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index f9574adab82a..38873cff3429 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -4,7 +4,7 @@ ir-core-objs	:= ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
 obj-y += keymaps/
 
 obj-$(CONFIG_IR_CORE) += ir-core.o
-obj-$(CONFIG_VIDEO_IR) += ir-common.o
+obj-$(CONFIG_IR_LEGACY) += ir-common.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
index fca734c43e8d..ec021c92527a 100644
--- a/drivers/media/IR/ir-functions.c
+++ b/drivers/media/IR/ir-functions.c
@@ -31,25 +31,6 @@
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
 
-/* -------------------------------------------------------------------------- */
-/* extract mask bits out of data and pack them into the result */
-u32 ir_extract_bits(u32 data, u32 mask)
-{
-	u32 vbit = 1, value = 0;
-
-	do {
-	    if (mask&1) {
-		if (data&1)
-			value |= vbit;
-		vbit<<=1;
-	    }
-	    data>>=1;
-	} while (mask>>=1);
-
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_extract_bits);
-
 /* RC5 decoding stuff, moved from bttv-input.c to share it with
  * saa7134 */
 
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index a6ceb08f1183..576f3b70d792 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -1,7 +1,6 @@
 config DVB_DM1105
 	tristate "SDMC DM1105 based PCI cards"
 	depends on DVB_CORE && PCI && I2C
-	depends on INPUT
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
@@ -9,7 +8,7 @@ config DVB_DM1105
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	depends on VIDEO_IR
+	depends on IR_CORE
 	help
 	  Support for cards based on the SDMC DM1105 PCI chip like
 	  DvbWorld 2002
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index debea8d1d31c..0ffd6943da83 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -89,7 +89,6 @@ config DVB_BUDGET
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
 	depends on DVB_BUDGET_CORE && I2C
-	depends on INPUT # due to IR
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
@@ -98,7 +97,7 @@ config DVB_BUDGET_CI
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	depends on VIDEO_IR
+	depends on IR_CORE
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 6830d2848bd7..22feac4d1e8f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -96,7 +96,7 @@ config VIDEO_HELPER_CHIPS_AUTO
 
 config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && VIDEO_IR
+	depends on I2C && IR_CORE
 	default y
 	---help---
 	  Most boards have an IR chip directly connected via GPIO. However,
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 1a4a89fdf767..659e44873440 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,10 +1,10 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on VIDEO_IR
+	depends on IR_LEGACY
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 76c054d1eef9..f3c3ccb491fe 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -1,9 +1,8 @@
 config VIDEO_CX18
 	tristate "Conexant cx23418 MPEG encoder support"
 	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
-	depends on INPUT	# due to VIDEO_IR
 	select I2C_ALGOBIT
-	depends on VIDEO_IR
+	depends on IR_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index c37eac114024..ab7d5df50f55 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_CX231XX
 	tristate "Conexant cx231xx USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT
+	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on IR_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index bcfd1ac48cc6..dbae62935e1f 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,12 +1,11 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C && INPUT && IR_CORE
+	depends on VIDEO_DEV && PCI && I2C && IR_CORE
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
 	select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  This is a video4linux driver for Conexant 2388x based
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 564e3cb29c4d..8c41124befbd 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -31,7 +31,6 @@
 
 #include "cx88.h"
 #include <media/ir-core.h>
-#include <media/ir-common.h>
 
 #define MODULE_NAME "cx88xx"
 
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 8d38c5fdece0..72ea2baba790 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_EM28XX
 	tristate "Empia EM28xx USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT
+	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on IR_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index be4af1fa557e..c4f19801c73b 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,9 +1,8 @@
 config VIDEO_IVTV
 	tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
 	depends on VIDEO_V4L2 && PCI && I2C
-	depends on INPUT   # due to VIDEO_IR
 	select I2C_ALGOBIT
-	depends on VIDEO_IR
+	depends on IR_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 3fe71be41a1f..32a95a2d66a1 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
 
 config VIDEO_SAA7134_RC
 	bool "Philips SAA7134 Remote Controller support"
-	depends on VIDEO_IR
+	depends on IR_LEGACY
 	depends on VIDEO_SAA7134
 	default y
 	---help---
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
index 1686ebfa6951..580580ec9362 100644
--- a/drivers/media/video/tlg2300/Kconfig
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_TLG2300
 	tristate "Telegent TLG2300 USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT && SND && DVB_CORE
+	depends on VIDEO_DEV && I2C && SND && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on IR_CORE
 	select VIDEOBUF_VMALLOC
 	select SND_PCM
 	select VIDEOBUF_DVB
-- 
cgit v1.2.3


From 32cf86f6d16367db5a10039c1dd938a2427d697c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 9 Nov 2010 23:00:14 -0300
Subject: [media] rename drivers/media/IR to drives/media/rc

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/IR/Kconfig                           |  167 --
 drivers/media/IR/Makefile                          |   22 -
 drivers/media/IR/ene_ir.c                          | 1217 ----------
 drivers/media/IR/ene_ir.h                          |  262 ---
 drivers/media/IR/imon.c                            | 2465 --------------------
 drivers/media/IR/ir-core-priv.h                    |  203 --
 drivers/media/IR/ir-functions.c                    |  120 -
 drivers/media/IR/ir-jvc-decoder.c                  |  199 --
 drivers/media/IR/ir-keytable.c                     |  766 ------
 drivers/media/IR/ir-lirc-codec.c                   |  410 ----
 drivers/media/IR/ir-nec-decoder.c                  |  217 --
 drivers/media/IR/ir-raw-event.c                    |  382 ---
 drivers/media/IR/ir-rc5-decoder.c                  |  190 --
 drivers/media/IR/ir-rc5-sz-decoder.c               |  154 --
 drivers/media/IR/ir-rc6-decoder.c                  |  281 ---
 drivers/media/IR/ir-sony-decoder.c                 |  182 --
 drivers/media/IR/ir-sysfs.c                        |  362 ---
 drivers/media/IR/keymaps/Kconfig                   |   15 -
 drivers/media/IR/keymaps/Makefile                  |   86 -
 drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c    |   89 -
 drivers/media/IR/keymaps/rc-alink-dtu-m.c          |   68 -
 drivers/media/IR/keymaps/rc-anysee.c               |   93 -
 drivers/media/IR/keymaps/rc-apac-viewcomp.c        |   80 -
 drivers/media/IR/keymaps/rc-asus-pc39.c            |   91 -
 drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c |   69 -
 drivers/media/IR/keymaps/rc-avermedia-a16d.c       |   75 -
 drivers/media/IR/keymaps/rc-avermedia-cardbus.c    |   97 -
 drivers/media/IR/keymaps/rc-avermedia-dvbt.c       |   78 -
 drivers/media/IR/keymaps/rc-avermedia-m135a.c      |  147 --
 .../media/IR/keymaps/rc-avermedia-m733a-rm-k6.c    |   95 -
 drivers/media/IR/keymaps/rc-avermedia-rm-ks.c      |   79 -
 drivers/media/IR/keymaps/rc-avermedia.c            |   86 -
 drivers/media/IR/keymaps/rc-avertv-303.c           |   85 -
 drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c   |  102 -
 drivers/media/IR/keymaps/rc-behold-columbus.c      |  108 -
 drivers/media/IR/keymaps/rc-behold.c               |  141 --
 drivers/media/IR/keymaps/rc-budget-ci-old.c        |   92 -
 drivers/media/IR/keymaps/rc-cinergy-1400.c         |   84 -
 drivers/media/IR/keymaps/rc-cinergy.c              |   78 -
 drivers/media/IR/keymaps/rc-dib0700-nec.c          |  124 -
 drivers/media/IR/keymaps/rc-dib0700-rc5.c          |  235 --
 drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c  |   98 -
 drivers/media/IR/keymaps/rc-digittrade.c           |   82 -
 drivers/media/IR/keymaps/rc-dm1105-nec.c           |   76 -
 drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c      |   78 -
 drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c   |   97 -
 drivers/media/IR/keymaps/rc-em-terratec.c          |   69 -
 drivers/media/IR/keymaps/rc-encore-enltv-fm53.c    |   81 -
 drivers/media/IR/keymaps/rc-encore-enltv.c         |  112 -
 drivers/media/IR/keymaps/rc-encore-enltv2.c        |   90 -
 drivers/media/IR/keymaps/rc-evga-indtube.c         |   61 -
 drivers/media/IR/keymaps/rc-eztv.c                 |   96 -
 drivers/media/IR/keymaps/rc-flydvb.c               |   77 -
 drivers/media/IR/keymaps/rc-flyvideo.c             |   70 -
 drivers/media/IR/keymaps/rc-fusionhdtv-mce.c       |   98 -
 drivers/media/IR/keymaps/rc-gadmei-rm008z.c        |   81 -
 drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c   |   84 -
 drivers/media/IR/keymaps/rc-gotview7135.c          |   79 -
 drivers/media/IR/keymaps/rc-hauppauge-new.c        |  100 -
 drivers/media/IR/keymaps/rc-imon-mce.c             |  142 --
 drivers/media/IR/keymaps/rc-imon-pad.c             |  156 --
 drivers/media/IR/keymaps/rc-iodata-bctv7e.c        |   88 -
 drivers/media/IR/keymaps/rc-kaiomy.c               |   87 -
 drivers/media/IR/keymaps/rc-kworld-315u.c          |   83 -
 .../media/IR/keymaps/rc-kworld-plus-tv-analog.c    |   99 -
 drivers/media/IR/keymaps/rc-leadtek-y04g0051.c     |   99 -
 drivers/media/IR/keymaps/rc-lirc.c                 |   41 -
 drivers/media/IR/keymaps/rc-lme2510.c              |   68 -
 drivers/media/IR/keymaps/rc-manli.c                |  134 --
 drivers/media/IR/keymaps/rc-msi-digivox-ii.c       |   67 -
 drivers/media/IR/keymaps/rc-msi-digivox-iii.c      |   85 -
 drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c  |  123 -
 drivers/media/IR/keymaps/rc-msi-tvanywhere.c       |   69 -
 drivers/media/IR/keymaps/rc-nebula.c               |   96 -
 .../media/IR/keymaps/rc-nec-terratec-cinergy-xs.c  |  105 -
 drivers/media/IR/keymaps/rc-norwood.c              |   85 -
 drivers/media/IR/keymaps/rc-npgtech.c              |   80 -
 drivers/media/IR/keymaps/rc-pctv-sedna.c           |   80 -
 drivers/media/IR/keymaps/rc-pinnacle-color.c       |   94 -
 drivers/media/IR/keymaps/rc-pinnacle-grey.c        |   89 -
 drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c     |   73 -
 drivers/media/IR/keymaps/rc-pixelview-mk12.c       |   83 -
 drivers/media/IR/keymaps/rc-pixelview-new.c        |   83 -
 drivers/media/IR/keymaps/rc-pixelview.c            |   82 -
 .../media/IR/keymaps/rc-powercolor-real-angel.c    |   81 -
 drivers/media/IR/keymaps/rc-proteus-2309.c         |   69 -
 drivers/media/IR/keymaps/rc-purpletv.c             |   81 -
 drivers/media/IR/keymaps/rc-pv951.c                |   78 -
 drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c    |  103 -
 drivers/media/IR/keymaps/rc-rc5-tv.c               |   81 -
 drivers/media/IR/keymaps/rc-rc6-mce.c              |  113 -
 .../media/IR/keymaps/rc-real-audio-220-32-keys.c   |   78 -
 drivers/media/IR/keymaps/rc-streamzap.c            |   82 -
 drivers/media/IR/keymaps/rc-tbs-nec.c              |   73 -
 drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c  |   92 -
 drivers/media/IR/keymaps/rc-terratec-slim.c        |   79 -
 drivers/media/IR/keymaps/rc-tevii-nec.c            |   88 -
 drivers/media/IR/keymaps/rc-total-media-in-hand.c  |   85 -
 drivers/media/IR/keymaps/rc-trekstor.c             |   80 -
 drivers/media/IR/keymaps/rc-tt-1500.c              |   82 -
 drivers/media/IR/keymaps/rc-twinhan1027.c          |   87 -
 drivers/media/IR/keymaps/rc-videomate-s350.c       |   85 -
 drivers/media/IR/keymaps/rc-videomate-tv-pvr.c     |   87 -
 drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c |   82 -
 drivers/media/IR/keymaps/rc-winfast.c              |  102 -
 drivers/media/IR/lirc_dev.c                        |  814 -------
 drivers/media/IR/mceusb.c                          | 1333 -----------
 drivers/media/IR/nuvoton-cir.c                     | 1252 ----------
 drivers/media/IR/nuvoton-cir.h                     |  408 ----
 drivers/media/IR/rc-map.c                          |  107 -
 drivers/media/IR/streamzap.c                       |  572 -----
 drivers/media/Kconfig                              |    2 +-
 drivers/media/Makefile                             |    2 +-
 drivers/media/rc/Kconfig                           |  167 ++
 drivers/media/rc/Makefile                          |   22 +
 drivers/media/rc/ene_ir.c                          | 1217 ++++++++++
 drivers/media/rc/ene_ir.h                          |  262 +++
 drivers/media/rc/imon.c                            | 2465 ++++++++++++++++++++
 drivers/media/rc/ir-core-priv.h                    |  203 ++
 drivers/media/rc/ir-functions.c                    |  120 +
 drivers/media/rc/ir-jvc-decoder.c                  |  199 ++
 drivers/media/rc/ir-keytable.c                     |  766 ++++++
 drivers/media/rc/ir-lirc-codec.c                   |  410 ++++
 drivers/media/rc/ir-nec-decoder.c                  |  217 ++
 drivers/media/rc/ir-raw-event.c                    |  382 +++
 drivers/media/rc/ir-rc5-decoder.c                  |  190 ++
 drivers/media/rc/ir-rc5-sz-decoder.c               |  154 ++
 drivers/media/rc/ir-rc6-decoder.c                  |  281 +++
 drivers/media/rc/ir-sony-decoder.c                 |  182 ++
 drivers/media/rc/ir-sysfs.c                        |  362 +++
 drivers/media/rc/keymaps/Kconfig                   |   15 +
 drivers/media/rc/keymaps/Makefile                  |   86 +
 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c    |   89 +
 drivers/media/rc/keymaps/rc-alink-dtu-m.c          |   68 +
 drivers/media/rc/keymaps/rc-anysee.c               |   93 +
 drivers/media/rc/keymaps/rc-apac-viewcomp.c        |   80 +
 drivers/media/rc/keymaps/rc-asus-pc39.c            |   91 +
 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c |   69 +
 drivers/media/rc/keymaps/rc-avermedia-a16d.c       |   75 +
 drivers/media/rc/keymaps/rc-avermedia-cardbus.c    |   97 +
 drivers/media/rc/keymaps/rc-avermedia-dvbt.c       |   78 +
 drivers/media/rc/keymaps/rc-avermedia-m135a.c      |  147 ++
 .../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c    |   95 +
 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c      |   79 +
 drivers/media/rc/keymaps/rc-avermedia.c            |   86 +
 drivers/media/rc/keymaps/rc-avertv-303.c           |   85 +
 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c   |  102 +
 drivers/media/rc/keymaps/rc-behold-columbus.c      |  108 +
 drivers/media/rc/keymaps/rc-behold.c               |  141 ++
 drivers/media/rc/keymaps/rc-budget-ci-old.c        |   92 +
 drivers/media/rc/keymaps/rc-cinergy-1400.c         |   84 +
 drivers/media/rc/keymaps/rc-cinergy.c              |   78 +
 drivers/media/rc/keymaps/rc-dib0700-nec.c          |  124 +
 drivers/media/rc/keymaps/rc-dib0700-rc5.c          |  235 ++
 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c  |   98 +
 drivers/media/rc/keymaps/rc-digittrade.c           |   82 +
 drivers/media/rc/keymaps/rc-dm1105-nec.c           |   76 +
 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c      |   78 +
 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c   |   97 +
 drivers/media/rc/keymaps/rc-em-terratec.c          |   69 +
 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c    |   81 +
 drivers/media/rc/keymaps/rc-encore-enltv.c         |  112 +
 drivers/media/rc/keymaps/rc-encore-enltv2.c        |   90 +
 drivers/media/rc/keymaps/rc-evga-indtube.c         |   61 +
 drivers/media/rc/keymaps/rc-eztv.c                 |   96 +
 drivers/media/rc/keymaps/rc-flydvb.c               |   77 +
 drivers/media/rc/keymaps/rc-flyvideo.c             |   70 +
 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c       |   98 +
 drivers/media/rc/keymaps/rc-gadmei-rm008z.c        |   81 +
 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c   |   84 +
 drivers/media/rc/keymaps/rc-gotview7135.c          |   79 +
 drivers/media/rc/keymaps/rc-hauppauge-new.c        |  100 +
 drivers/media/rc/keymaps/rc-imon-mce.c             |  142 ++
 drivers/media/rc/keymaps/rc-imon-pad.c             |  156 ++
 drivers/media/rc/keymaps/rc-iodata-bctv7e.c        |   88 +
 drivers/media/rc/keymaps/rc-kaiomy.c               |   87 +
 drivers/media/rc/keymaps/rc-kworld-315u.c          |   83 +
 .../media/rc/keymaps/rc-kworld-plus-tv-analog.c    |   99 +
 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c     |   99 +
 drivers/media/rc/keymaps/rc-lirc.c                 |   41 +
 drivers/media/rc/keymaps/rc-lme2510.c              |   68 +
 drivers/media/rc/keymaps/rc-manli.c                |  134 ++
 drivers/media/rc/keymaps/rc-msi-digivox-ii.c       |   67 +
 drivers/media/rc/keymaps/rc-msi-digivox-iii.c      |   85 +
 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c  |  123 +
 drivers/media/rc/keymaps/rc-msi-tvanywhere.c       |   69 +
 drivers/media/rc/keymaps/rc-nebula.c               |   96 +
 .../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c  |  105 +
 drivers/media/rc/keymaps/rc-norwood.c              |   85 +
 drivers/media/rc/keymaps/rc-npgtech.c              |   80 +
 drivers/media/rc/keymaps/rc-pctv-sedna.c           |   80 +
 drivers/media/rc/keymaps/rc-pinnacle-color.c       |   94 +
 drivers/media/rc/keymaps/rc-pinnacle-grey.c        |   89 +
 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c     |   73 +
 drivers/media/rc/keymaps/rc-pixelview-mk12.c       |   83 +
 drivers/media/rc/keymaps/rc-pixelview-new.c        |   83 +
 drivers/media/rc/keymaps/rc-pixelview.c            |   82 +
 .../media/rc/keymaps/rc-powercolor-real-angel.c    |   81 +
 drivers/media/rc/keymaps/rc-proteus-2309.c         |   69 +
 drivers/media/rc/keymaps/rc-purpletv.c             |   81 +
 drivers/media/rc/keymaps/rc-pv951.c                |   78 +
 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c    |  103 +
 drivers/media/rc/keymaps/rc-rc5-tv.c               |   81 +
 drivers/media/rc/keymaps/rc-rc6-mce.c              |  113 +
 .../media/rc/keymaps/rc-real-audio-220-32-keys.c   |   78 +
 drivers/media/rc/keymaps/rc-streamzap.c            |   82 +
 drivers/media/rc/keymaps/rc-tbs-nec.c              |   73 +
 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c  |   92 +
 drivers/media/rc/keymaps/rc-terratec-slim.c        |   79 +
 drivers/media/rc/keymaps/rc-tevii-nec.c            |   88 +
 drivers/media/rc/keymaps/rc-total-media-in-hand.c  |   85 +
 drivers/media/rc/keymaps/rc-trekstor.c             |   80 +
 drivers/media/rc/keymaps/rc-tt-1500.c              |   82 +
 drivers/media/rc/keymaps/rc-twinhan1027.c          |   87 +
 drivers/media/rc/keymaps/rc-videomate-s350.c       |   85 +
 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c     |   87 +
 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c |   82 +
 drivers/media/rc/keymaps/rc-winfast.c              |  102 +
 drivers/media/rc/lirc_dev.c                        |  814 +++++++
 drivers/media/rc/mceusb.c                          | 1333 +++++++++++
 drivers/media/rc/nuvoton-cir.c                     | 1252 ++++++++++
 drivers/media/rc/nuvoton-cir.h                     |  408 ++++
 drivers/media/rc/rc-map.c                          |  107 +
 drivers/media/rc/streamzap.c                       |  572 +++++
 224 files changed, 19992 insertions(+), 19992 deletions(-)
 delete mode 100644 drivers/media/IR/Kconfig
 delete mode 100644 drivers/media/IR/Makefile
 delete mode 100644 drivers/media/IR/ene_ir.c
 delete mode 100644 drivers/media/IR/ene_ir.h
 delete mode 100644 drivers/media/IR/imon.c
 delete mode 100644 drivers/media/IR/ir-core-priv.h
 delete mode 100644 drivers/media/IR/ir-functions.c
 delete mode 100644 drivers/media/IR/ir-jvc-decoder.c
 delete mode 100644 drivers/media/IR/ir-keytable.c
 delete mode 100644 drivers/media/IR/ir-lirc-codec.c
 delete mode 100644 drivers/media/IR/ir-nec-decoder.c
 delete mode 100644 drivers/media/IR/ir-raw-event.c
 delete mode 100644 drivers/media/IR/ir-rc5-decoder.c
 delete mode 100644 drivers/media/IR/ir-rc5-sz-decoder.c
 delete mode 100644 drivers/media/IR/ir-rc6-decoder.c
 delete mode 100644 drivers/media/IR/ir-sony-decoder.c
 delete mode 100644 drivers/media/IR/ir-sysfs.c
 delete mode 100644 drivers/media/IR/keymaps/Kconfig
 delete mode 100644 drivers/media/IR/keymaps/Makefile
 delete mode 100644 drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c
 delete mode 100644 drivers/media/IR/keymaps/rc-alink-dtu-m.c
 delete mode 100644 drivers/media/IR/keymaps/rc-anysee.c
 delete mode 100644 drivers/media/IR/keymaps/rc-apac-viewcomp.c
 delete mode 100644 drivers/media/IR/keymaps/rc-asus-pc39.c
 delete mode 100644 drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-a16d.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-cardbus.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-dvbt.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-m135a.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia-rm-ks.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avermedia.c
 delete mode 100644 drivers/media/IR/keymaps/rc-avertv-303.c
 delete mode 100644 drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c
 delete mode 100644 drivers/media/IR/keymaps/rc-behold-columbus.c
 delete mode 100644 drivers/media/IR/keymaps/rc-behold.c
 delete mode 100644 drivers/media/IR/keymaps/rc-budget-ci-old.c
 delete mode 100644 drivers/media/IR/keymaps/rc-cinergy-1400.c
 delete mode 100644 drivers/media/IR/keymaps/rc-cinergy.c
 delete mode 100644 drivers/media/IR/keymaps/rc-dib0700-nec.c
 delete mode 100644 drivers/media/IR/keymaps/rc-dib0700-rc5.c
 delete mode 100644 drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c
 delete mode 100644 drivers/media/IR/keymaps/rc-digittrade.c
 delete mode 100644 drivers/media/IR/keymaps/rc-dm1105-nec.c
 delete mode 100644 drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c
 delete mode 100644 drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c
 delete mode 100644 drivers/media/IR/keymaps/rc-em-terratec.c
 delete mode 100644 drivers/media/IR/keymaps/rc-encore-enltv-fm53.c
 delete mode 100644 drivers/media/IR/keymaps/rc-encore-enltv.c
 delete mode 100644 drivers/media/IR/keymaps/rc-encore-enltv2.c
 delete mode 100644 drivers/media/IR/keymaps/rc-evga-indtube.c
 delete mode 100644 drivers/media/IR/keymaps/rc-eztv.c
 delete mode 100644 drivers/media/IR/keymaps/rc-flydvb.c
 delete mode 100644 drivers/media/IR/keymaps/rc-flyvideo.c
 delete mode 100644 drivers/media/IR/keymaps/rc-fusionhdtv-mce.c
 delete mode 100644 drivers/media/IR/keymaps/rc-gadmei-rm008z.c
 delete mode 100644 drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c
 delete mode 100644 drivers/media/IR/keymaps/rc-gotview7135.c
 delete mode 100644 drivers/media/IR/keymaps/rc-hauppauge-new.c
 delete mode 100644 drivers/media/IR/keymaps/rc-imon-mce.c
 delete mode 100644 drivers/media/IR/keymaps/rc-imon-pad.c
 delete mode 100644 drivers/media/IR/keymaps/rc-iodata-bctv7e.c
 delete mode 100644 drivers/media/IR/keymaps/rc-kaiomy.c
 delete mode 100644 drivers/media/IR/keymaps/rc-kworld-315u.c
 delete mode 100644 drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c
 delete mode 100644 drivers/media/IR/keymaps/rc-leadtek-y04g0051.c
 delete mode 100644 drivers/media/IR/keymaps/rc-lirc.c
 delete mode 100644 drivers/media/IR/keymaps/rc-lme2510.c
 delete mode 100644 drivers/media/IR/keymaps/rc-manli.c
 delete mode 100644 drivers/media/IR/keymaps/rc-msi-digivox-ii.c
 delete mode 100644 drivers/media/IR/keymaps/rc-msi-digivox-iii.c
 delete mode 100644 drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c
 delete mode 100644 drivers/media/IR/keymaps/rc-msi-tvanywhere.c
 delete mode 100644 drivers/media/IR/keymaps/rc-nebula.c
 delete mode 100644 drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c
 delete mode 100644 drivers/media/IR/keymaps/rc-norwood.c
 delete mode 100644 drivers/media/IR/keymaps/rc-npgtech.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pctv-sedna.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pinnacle-color.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pinnacle-grey.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pixelview-mk12.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pixelview-new.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pixelview.c
 delete mode 100644 drivers/media/IR/keymaps/rc-powercolor-real-angel.c
 delete mode 100644 drivers/media/IR/keymaps/rc-proteus-2309.c
 delete mode 100644 drivers/media/IR/keymaps/rc-purpletv.c
 delete mode 100644 drivers/media/IR/keymaps/rc-pv951.c
 delete mode 100644 drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c
 delete mode 100644 drivers/media/IR/keymaps/rc-rc5-tv.c
 delete mode 100644 drivers/media/IR/keymaps/rc-rc6-mce.c
 delete mode 100644 drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c
 delete mode 100644 drivers/media/IR/keymaps/rc-streamzap.c
 delete mode 100644 drivers/media/IR/keymaps/rc-tbs-nec.c
 delete mode 100644 drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c
 delete mode 100644 drivers/media/IR/keymaps/rc-terratec-slim.c
 delete mode 100644 drivers/media/IR/keymaps/rc-tevii-nec.c
 delete mode 100644 drivers/media/IR/keymaps/rc-total-media-in-hand.c
 delete mode 100644 drivers/media/IR/keymaps/rc-trekstor.c
 delete mode 100644 drivers/media/IR/keymaps/rc-tt-1500.c
 delete mode 100644 drivers/media/IR/keymaps/rc-twinhan1027.c
 delete mode 100644 drivers/media/IR/keymaps/rc-videomate-s350.c
 delete mode 100644 drivers/media/IR/keymaps/rc-videomate-tv-pvr.c
 delete mode 100644 drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c
 delete mode 100644 drivers/media/IR/keymaps/rc-winfast.c
 delete mode 100644 drivers/media/IR/lirc_dev.c
 delete mode 100644 drivers/media/IR/mceusb.c
 delete mode 100644 drivers/media/IR/nuvoton-cir.c
 delete mode 100644 drivers/media/IR/nuvoton-cir.h
 delete mode 100644 drivers/media/IR/rc-map.c
 delete mode 100644 drivers/media/IR/streamzap.c
 create mode 100644 drivers/media/rc/Kconfig
 create mode 100644 drivers/media/rc/Makefile
 create mode 100644 drivers/media/rc/ene_ir.c
 create mode 100644 drivers/media/rc/ene_ir.h
 create mode 100644 drivers/media/rc/imon.c
 create mode 100644 drivers/media/rc/ir-core-priv.h
 create mode 100644 drivers/media/rc/ir-functions.c
 create mode 100644 drivers/media/rc/ir-jvc-decoder.c
 create mode 100644 drivers/media/rc/ir-keytable.c
 create mode 100644 drivers/media/rc/ir-lirc-codec.c
 create mode 100644 drivers/media/rc/ir-nec-decoder.c
 create mode 100644 drivers/media/rc/ir-raw-event.c
 create mode 100644 drivers/media/rc/ir-rc5-decoder.c
 create mode 100644 drivers/media/rc/ir-rc5-sz-decoder.c
 create mode 100644 drivers/media/rc/ir-rc6-decoder.c
 create mode 100644 drivers/media/rc/ir-sony-decoder.c
 create mode 100644 drivers/media/rc/ir-sysfs.c
 create mode 100644 drivers/media/rc/keymaps/Kconfig
 create mode 100644 drivers/media/rc/keymaps/Makefile
 create mode 100644 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
 create mode 100644 drivers/media/rc/keymaps/rc-alink-dtu-m.c
 create mode 100644 drivers/media/rc/keymaps/rc-anysee.c
 create mode 100644 drivers/media/rc/keymaps/rc-apac-viewcomp.c
 create mode 100644 drivers/media/rc/keymaps/rc-asus-pc39.c
 create mode 100644 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-a16d.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-cardbus.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-dvbt.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-m135a.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
 create mode 100644 drivers/media/rc/keymaps/rc-avermedia.c
 create mode 100644 drivers/media/rc/keymaps/rc-avertv-303.c
 create mode 100644 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
 create mode 100644 drivers/media/rc/keymaps/rc-behold-columbus.c
 create mode 100644 drivers/media/rc/keymaps/rc-behold.c
 create mode 100644 drivers/media/rc/keymaps/rc-budget-ci-old.c
 create mode 100644 drivers/media/rc/keymaps/rc-cinergy-1400.c
 create mode 100644 drivers/media/rc/keymaps/rc-cinergy.c
 create mode 100644 drivers/media/rc/keymaps/rc-dib0700-nec.c
 create mode 100644 drivers/media/rc/keymaps/rc-dib0700-rc5.c
 create mode 100644 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
 create mode 100644 drivers/media/rc/keymaps/rc-digittrade.c
 create mode 100644 drivers/media/rc/keymaps/rc-dm1105-nec.c
 create mode 100644 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
 create mode 100644 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
 create mode 100644 drivers/media/rc/keymaps/rc-em-terratec.c
 create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
 create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv.c
 create mode 100644 drivers/media/rc/keymaps/rc-encore-enltv2.c
 create mode 100644 drivers/media/rc/keymaps/rc-evga-indtube.c
 create mode 100644 drivers/media/rc/keymaps/rc-eztv.c
 create mode 100644 drivers/media/rc/keymaps/rc-flydvb.c
 create mode 100644 drivers/media/rc/keymaps/rc-flyvideo.c
 create mode 100644 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
 create mode 100644 drivers/media/rc/keymaps/rc-gadmei-rm008z.c
 create mode 100644 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
 create mode 100644 drivers/media/rc/keymaps/rc-gotview7135.c
 create mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c
 create mode 100644 drivers/media/rc/keymaps/rc-imon-mce.c
 create mode 100644 drivers/media/rc/keymaps/rc-imon-pad.c
 create mode 100644 drivers/media/rc/keymaps/rc-iodata-bctv7e.c
 create mode 100644 drivers/media/rc/keymaps/rc-kaiomy.c
 create mode 100644 drivers/media/rc/keymaps/rc-kworld-315u.c
 create mode 100644 drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
 create mode 100644 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
 create mode 100644 drivers/media/rc/keymaps/rc-lirc.c
 create mode 100644 drivers/media/rc/keymaps/rc-lme2510.c
 create mode 100644 drivers/media/rc/keymaps/rc-manli.c
 create mode 100644 drivers/media/rc/keymaps/rc-msi-digivox-ii.c
 create mode 100644 drivers/media/rc/keymaps/rc-msi-digivox-iii.c
 create mode 100644 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
 create mode 100644 drivers/media/rc/keymaps/rc-msi-tvanywhere.c
 create mode 100644 drivers/media/rc/keymaps/rc-nebula.c
 create mode 100644 drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
 create mode 100644 drivers/media/rc/keymaps/rc-norwood.c
 create mode 100644 drivers/media/rc/keymaps/rc-npgtech.c
 create mode 100644 drivers/media/rc/keymaps/rc-pctv-sedna.c
 create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-color.c
 create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-grey.c
 create mode 100644 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
 create mode 100644 drivers/media/rc/keymaps/rc-pixelview-mk12.c
 create mode 100644 drivers/media/rc/keymaps/rc-pixelview-new.c
 create mode 100644 drivers/media/rc/keymaps/rc-pixelview.c
 create mode 100644 drivers/media/rc/keymaps/rc-powercolor-real-angel.c
 create mode 100644 drivers/media/rc/keymaps/rc-proteus-2309.c
 create mode 100644 drivers/media/rc/keymaps/rc-purpletv.c
 create mode 100644 drivers/media/rc/keymaps/rc-pv951.c
 create mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
 create mode 100644 drivers/media/rc/keymaps/rc-rc5-tv.c
 create mode 100644 drivers/media/rc/keymaps/rc-rc6-mce.c
 create mode 100644 drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
 create mode 100644 drivers/media/rc/keymaps/rc-streamzap.c
 create mode 100644 drivers/media/rc/keymaps/rc-tbs-nec.c
 create mode 100644 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
 create mode 100644 drivers/media/rc/keymaps/rc-terratec-slim.c
 create mode 100644 drivers/media/rc/keymaps/rc-tevii-nec.c
 create mode 100644 drivers/media/rc/keymaps/rc-total-media-in-hand.c
 create mode 100644 drivers/media/rc/keymaps/rc-trekstor.c
 create mode 100644 drivers/media/rc/keymaps/rc-tt-1500.c
 create mode 100644 drivers/media/rc/keymaps/rc-twinhan1027.c
 create mode 100644 drivers/media/rc/keymaps/rc-videomate-s350.c
 create mode 100644 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
 create mode 100644 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
 create mode 100644 drivers/media/rc/keymaps/rc-winfast.c
 create mode 100644 drivers/media/rc/lirc_dev.c
 create mode 100644 drivers/media/rc/mceusb.c
 create mode 100644 drivers/media/rc/nuvoton-cir.c
 create mode 100644 drivers/media/rc/nuvoton-cir.h
 create mode 100644 drivers/media/rc/rc-map.c
 create mode 100644 drivers/media/rc/streamzap.c

(limited to 'drivers/media')

diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
deleted file mode 100644
index 20e02a0a5e48..000000000000
--- a/drivers/media/IR/Kconfig
+++ /dev/null
@@ -1,167 +0,0 @@
-menuconfig IR_CORE
-	tristate "Infrared remote controller adapters"
-	depends on INPUT
-	default INPUT
-	---help---
-	  Enable support for Remote Controllers on Linux. This is
-	  needed in order to support several video capture adapters.
-
-	  Enable this option if you have a video capture board even
-	  if you don't need IR, as otherwise, you may not be able to
-	  compile the driver for your adapter.
-
-config IR_LEGACY
-	tristate
-	depends on IR_CORE
-	default IR_CORE
-
-if IR_CORE
-
-config LIRC
-	tristate
-	default y
-
-	---help---
-	   Enable this option to build the Linux Infrared Remote
-	   Control (LIRC) core device interface driver. The LIRC
-	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception and
-	   encoding for IR transmitting (aka "blasting").
-
-source "drivers/media/IR/keymaps/Kconfig"
-
-config IR_NEC_DECODER
-	tristate "Enable IR raw decoder for the NEC protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with NEC protocol, and
-	   if the IR is decoded in software
-
-config IR_RC5_DECODER
-	tristate "Enable IR raw decoder for the RC-5 protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with RC-5 protocol, and
-	   if the IR is decoded in software
-
-config IR_RC6_DECODER
-	tristate "Enable IR raw decoder for the RC6 protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the RC6 protocol, and you need software decoding support.
-
-config IR_JVC_DECODER
-	tristate "Enable IR raw decoder for the JVC protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the JVC protocol, and you need software decoding support.
-
-config IR_SONY_DECODER
-	tristate "Enable IR raw decoder for the Sony protocol"
-	depends on IR_CORE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the Sony protocol, and you need software decoding support.
-
-config IR_RC5_SZ_DECODER
-	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with RC-5 (streamzap) protocol,
-	   and if the IR is decoded in software. (The Streamzap PC Remote
-	   uses an IR protocol that is almost standard RC-5, but not quite,
-	   as it uses an additional bit).
-
-config IR_LIRC_CODEC
-	tristate "Enable IR to LIRC bridge"
-	depends on IR_CORE
-	depends on LIRC
-	default y
-
-	---help---
-	   Enable this option to pass raw IR to and from userspace via
-	   the LIRC interface.
-
-config IR_ENE
-	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
-	depends on PNP
-	depends on IR_CORE
-	---help---
-	   Say Y here to enable support for integrated infrared receiver
-	   /transceiver made by ENE.
-
-	   You can see if you have it by looking at lspnp output.
-	   Output should include ENE0100 ENE0200 or something similar.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called ene_ir.
-
-config IR_IMON
-	tristate "SoundGraph iMON Receiver and Display"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
-	   IR Receiver and/or LCD/VFD/VGA display.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called imon.
-
-config IR_MCEUSB
-	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a Windows Media Center Edition
-	   eHome Infrared Transceiver.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called mceusb.
-
-config IR_NUVOTON
-	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
-	depends on PNP
-	depends on IR_CORE
-	---help---
-	   Say Y here to enable support for integrated infrared receiver
-	   /transciever made by Nuvoton (formerly Winbond). This chip is
-	   found in the ASRock ION 330HT, as well as assorted Intel
-	   DP55-series motherboards (and of course, possibly others).
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called nuvoton-cir.
-
-config IR_STREAMZAP
-	tristate "Streamzap PC Remote IR Receiver"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a Streamzap PC Remote
-	   Infrared Receiver.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called streamzap.
-
-endif #IR_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
deleted file mode 100644
index 38873cff3429..000000000000
--- a/drivers/media/IR/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-ir-common-objs  := ir-functions.o
-ir-core-objs	:= ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
-
-obj-y += keymaps/
-
-obj-$(CONFIG_IR_CORE) += ir-core.o
-obj-$(CONFIG_IR_LEGACY) += ir-common.o
-obj-$(CONFIG_LIRC) += lirc_dev.o
-obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
-obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
-obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
-obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
-obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
-obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
-obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
-
-# stand-alone IR receivers/transmitters
-obj-$(CONFIG_IR_IMON) += imon.o
-obj-$(CONFIG_IR_MCEUSB) += mceusb.o
-obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
-obj-$(CONFIG_IR_ENE) += ene_ir.o
-obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/IR/ene_ir.c
deleted file mode 100644
index 7637babcd262..000000000000
--- a/drivers/media/IR/ene_ir.c
+++ /dev/null
@@ -1,1217 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
- *
- * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- *
- * Special thanks to:
- *   Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore
- *    bringing to life support for transmission & learning mode.
- *
- *   Charlie Andrews <charliethepilot@googlemail.com> for lots of help in
- *   bringing up the support of new firmware buffer that is popular
- *   on latest notebooks
- *
- *   ENE for partial device documentation
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <media/ir-common.h>
-#include "ene_ir.h"
-
-static int sample_period;
-static bool learning_mode_force;
-static int debug;
-static bool txsim;
-
-static void ene_set_reg_addr(struct ene_device *dev, u16 reg)
-{
-	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
-	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-}
-
-/* read a hardware register */
-static u8 ene_read_reg(struct ene_device *dev, u16 reg)
-{
-	u8 retval;
-	ene_set_reg_addr(dev, reg);
-	retval = inb(dev->hw_io + ENE_IO);
-	dbg_regs("reg %04x == %02x", reg, retval);
-	return retval;
-}
-
-/* write a hardware register */
-static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
-	dbg_regs("reg %04x <- %02x", reg, value);
-	ene_set_reg_addr(dev, reg);
-	outb(value, dev->hw_io + ENE_IO);
-}
-
-/* Set bits in hardware register */
-static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
-{
-	dbg_regs("reg %04x |= %02x", reg, mask);
-	ene_set_reg_addr(dev, reg);
-	outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);
-}
-
-/* Clear bits in hardware register */
-static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
-{
-	dbg_regs("reg %04x &= ~%02x ", reg, mask);
-	ene_set_reg_addr(dev, reg);
-	outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);
-}
-
-/* A helper to set/clear a bit in register according to boolean variable */
-static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,
-								bool set)
-{
-	if (set)
-		ene_set_reg_mask(dev, reg, mask);
-	else
-		ene_clear_reg_mask(dev, reg, mask);
-}
-
-/* detect hardware features */
-static int ene_hw_detect(struct ene_device *dev)
-{
-	u8 chip_major, chip_minor;
-	u8 hw_revision, old_ver;
-	u8 fw_reg2, fw_reg1;
-
-	ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
-	chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);
-	chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);
-	ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
-
-	hw_revision = ene_read_reg(dev, ENE_ECHV);
-	old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);
-
-	dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +
-		(ene_read_reg(dev, ENE_PLLFRL) >> 4);
-
-	if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)
-		dev->rx_period_adjust =
-			dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
-
-	if (hw_revision == 0xFF) {
-		ene_warn("device seems to be disabled");
-		ene_warn("send a mail to lirc-list@lists.sourceforge.net");
-		ene_warn("please attach output of acpidump and dmidecode");
-		return -ENODEV;
-	}
-
-	ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
-		chip_major, chip_minor, old_ver, hw_revision);
-
-	ene_notice("PLL freq = %d", dev->pll_freq);
-
-	if (chip_major == 0x33) {
-		ene_warn("chips 0x33xx aren't supported");
-		return -ENODEV;
-	}
-
-	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_C;
-		ene_notice("KB3926C detected");
-	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
-		dev->hw_revision = ENE_HW_B;
-		ene_notice("KB3926B detected");
-	} else {
-		dev->hw_revision = ENE_HW_D;
-		ene_notice("KB3926D or higher detected");
-	}
-
-	/* detect features hardware supports */
-	if (dev->hw_revision < ENE_HW_C)
-		return 0;
-
-	fw_reg1 = ene_read_reg(dev, ENE_FW1);
-	fw_reg2 = ene_read_reg(dev, ENE_FW2);
-
-	ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
-
-	dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
-	dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
-	dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);
-
-	if (dev->hw_learning_and_tx_capable)
-		dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
-
-	ene_notice("Hardware features:");
-
-	if (dev->hw_learning_and_tx_capable) {
-		ene_notice("* Supports transmitting & learning mode");
-		ene_notice("   This feature is rare and therefore,");
-		ene_notice("   you are welcome to test it,");
-		ene_notice("   and/or contact the author via:");
-		ene_notice("   lirc-list@lists.sourceforge.net");
-		ene_notice("   or maximlevitsky@gmail.com");
-
-		ene_notice("* Uses GPIO %s for IR raw input",
-			dev->hw_use_gpio_0a ? "40" : "0A");
-
-		if (dev->hw_fan_input)
-			ene_notice("* Uses unused fan feedback input as source"
-					" of demodulated IR data");
-	}
-
-	if (!dev->hw_fan_input)
-		ene_notice("* Uses GPIO %s for IR demodulated input",
-			dev->hw_use_gpio_0a ? "0A" : "40");
-
-	if (dev->hw_extra_buffer)
-		ene_notice("* Uses new style input buffer");
-	return 0;
-}
-
-/* Read properities of hw sample buffer */
-static void ene_rx_setup_hw_buffer(struct ene_device *dev)
-{
-	u16 tmp;
-
-	ene_rx_read_hw_pointer(dev);
-	dev->r_pointer = dev->w_pointer;
-
-	if (!dev->hw_extra_buffer) {
-		dev->buffer_len = ENE_FW_PACKET_SIZE * 2;
-		return;
-	}
-
-	tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);
-	tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;
-	dev->extra_buf1_address = tmp;
-
-	dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);
-
-	tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);
-	tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;
-	dev->extra_buf2_address = tmp;
-
-	dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);
-
-	dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
-
-	ene_notice("Hardware uses 2 extended buffers:");
-	ene_notice("  0x%04x - len : %d", dev->extra_buf1_address,
-						dev->extra_buf1_len);
-	ene_notice("  0x%04x - len : %d", dev->extra_buf2_address,
-						dev->extra_buf2_len);
-
-	ene_notice("Total buffer len = %d", dev->buffer_len);
-
-	if (dev->buffer_len > 64 || dev->buffer_len < 16)
-		goto error;
-
-	if (dev->extra_buf1_address > 0xFBFC ||
-					dev->extra_buf1_address < 0xEC00)
-		goto error;
-
-	if (dev->extra_buf2_address > 0xFBFC ||
-					dev->extra_buf2_address < 0xEC00)
-		goto error;
-
-	if (dev->r_pointer > dev->buffer_len)
-		goto error;
-
-	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
-	return;
-error:
-	ene_warn("Error validating extra buffers, device probably won't work");
-	dev->hw_extra_buffer = false;
-	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
-}
-
-
-/* Restore the pointers to extra buffers - to make module reload work*/
-static void ene_rx_restore_hw_buffer(struct ene_device *dev)
-{
-	if (!dev->hw_extra_buffer)
-		return;
-
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,
-				dev->extra_buf1_address & 0xFF);
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,
-				dev->extra_buf1_address >> 8);
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);
-
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,
-				dev->extra_buf2_address & 0xFF);
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,
-				dev->extra_buf2_address >> 8);
-	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,
-				dev->extra_buf2_len);
-	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
-}
-
-/* Read hardware write pointer */
-static void ene_rx_read_hw_pointer(struct ene_device *dev)
-{
-	if (dev->hw_extra_buffer)
-		dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);
-	else
-		dev->w_pointer = ene_read_reg(dev, ENE_FW2)
-			& ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;
-
-	dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",
-		dev->w_pointer, dev->r_pointer);
-}
-
-/* Gets address of next sample from HW ring buffer */
-static int ene_rx_get_sample_reg(struct ene_device *dev)
-{
-	int r_pointer;
-
-	if (dev->r_pointer == dev->w_pointer) {
-		dbg_verbose("RB: hit end, try update w_pointer");
-		ene_rx_read_hw_pointer(dev);
-	}
-
-	if (dev->r_pointer == dev->w_pointer) {
-		dbg_verbose("RB: end of data at %d", dev->r_pointer);
-		return 0;
-	}
-
-	dbg_verbose("RB: reading at offset %d", dev->r_pointer);
-	r_pointer = dev->r_pointer;
-
-	dev->r_pointer++;
-	if (dev->r_pointer == dev->buffer_len)
-		dev->r_pointer = 0;
-
-	dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);
-
-	if (r_pointer < 8) {
-		dbg_verbose("RB: read at main buffer at %d", r_pointer);
-		return ENE_FW_SAMPLE_BUFFER + r_pointer;
-	}
-
-	r_pointer -= 8;
-
-	if (r_pointer < dev->extra_buf1_len) {
-		dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);
-		return dev->extra_buf1_address + r_pointer;
-	}
-
-	r_pointer -= dev->extra_buf1_len;
-
-	if (r_pointer < dev->extra_buf2_len) {
-		dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);
-		return dev->extra_buf2_address + r_pointer;
-	}
-
-	dbg("attempt to read beyong ring bufer end");
-	return 0;
-}
-
-/* Sense current received carrier */
-void ene_rx_sense_carrier(struct ene_device *dev)
-{
-	DEFINE_IR_RAW_EVENT(ev);
-
-	int carrier, duty_cycle;
-	int period = ene_read_reg(dev, ENE_CIRCAR_PRD);
-	int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);
-
-	if (!(period & ENE_CIRCAR_PRD_VALID))
-		return;
-
-	period &= ~ENE_CIRCAR_PRD_VALID;
-
-	if (!period)
-		return;
-
-	dbg("RX: hardware carrier period = %02x", period);
-	dbg("RX: hardware carrier pulse period = %02x", hperiod);
-
-	carrier = 2000000 / period;
-	duty_cycle = (hperiod * 100) / period;
-	dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",
-						carrier, duty_cycle);
-	if (dev->carrier_detect_enabled) {
-		ev.carrier_report = true;
-		ev.carrier = carrier;
-		ev.duty_cycle = duty_cycle;
-		ir_raw_event_store(dev->idev, &ev);
-	}
-}
-
-/* this enables/disables the CIR RX engine */
-static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)
-{
-	ene_set_clear_reg_mask(dev, ENE_CIRCFG,
-			ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);
-}
-
-/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/
-static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)
-{
-	ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);
-}
-
-/*
- * this enables alternative input via fan tachometer sensor and bypasses
- * the hw CIR engine
- */
-static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)
-{
-	if (!dev->hw_fan_input)
-		return;
-
-	if (!enable)
-		ene_write_reg(dev, ENE_FAN_AS_IN1, 0);
-	else {
-		ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
-		ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
-	}
-}
-
-/* setup the receiver for RX*/
-static void ene_rx_setup(struct ene_device *dev)
-{
-	bool learning_mode = dev->learning_mode_enabled ||
-					dev->carrier_detect_enabled;
-	int sample_period_adjust = 0;
-
-	dbg("RX: setup receiver, learning mode = %d", learning_mode);
-
-
-	/* This selects RLC input and clears CFG2 settings */
-	ene_write_reg(dev, ENE_CIRCFG2, 0x00);
-
-	/* set sample period*/
-	if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)
-		sample_period_adjust =
-			dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;
-
-	ene_write_reg(dev, ENE_CIRRLC_CFG,
-			(sample_period + sample_period_adjust) |
-						ENE_CIRRLC_CFG_OVERFLOW);
-	/* revB doesn't support inputs */
-	if (dev->hw_revision < ENE_HW_C)
-		goto select_timeout;
-
-	if (learning_mode) {
-
-		WARN_ON(!dev->hw_learning_and_tx_capable);
-
-		/* Enable the opposite of the normal input
-		That means that if GPIO40 is normally used, use GPIO0A
-		and vice versa.
-		This input will carry non demodulated
-		signal, and we will tell the hw to demodulate it itself */
-		ene_rx_select_input(dev, !dev->hw_use_gpio_0a);
-		dev->rx_fan_input_inuse = false;
-
-		/* Enable carrier demodulation */
-		ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
-
-		/* Enable carrier detection */
-		ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);
-		ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,
-			dev->carrier_detect_enabled || debug);
-	} else {
-		if (dev->hw_fan_input)
-			dev->rx_fan_input_inuse = true;
-		else
-			ene_rx_select_input(dev, dev->hw_use_gpio_0a);
-
-		/* Disable carrier detection & demodulation */
-		ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
-		ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);
-	}
-
-select_timeout:
-	if (dev->rx_fan_input_inuse) {
-		dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
-
-		/* Fan input doesn't support timeouts, it just ends the
-			input with a maximum sample */
-		dev->props->min_timeout = dev->props->max_timeout =
-			MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
-				ENE_FW_SAMPLE_PERIOD_FAN);
-	} else {
-		dev->props->rx_resolution = MS_TO_NS(sample_period);
-
-		/* Theoreticly timeout is unlimited, but we cap it
-		 * because it was seen that on one device, it
-		 * would stop sending spaces after around 250 msec.
-		 * Besides, this is close to 2^32 anyway and timeout is u32.
-		 */
-		dev->props->min_timeout = MS_TO_NS(127 * sample_period);
-		dev->props->max_timeout = MS_TO_NS(200000);
-	}
-
-	if (dev->hw_learning_and_tx_capable)
-		dev->props->tx_resolution = MS_TO_NS(sample_period);
-
-	if (dev->props->timeout > dev->props->max_timeout)
-		dev->props->timeout = dev->props->max_timeout;
-	if (dev->props->timeout < dev->props->min_timeout)
-		dev->props->timeout = dev->props->min_timeout;
-}
-
-/* Enable the device for receive */
-static void ene_rx_enable(struct ene_device *dev)
-{
-	u8 reg_value;
-
-	/* Enable system interrupt */
-	if (dev->hw_revision < ENE_HW_C) {
-		ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);
-		ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
-	} else {
-		reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;
-		reg_value |= ENE_IRQ_UNK_EN;
-		reg_value &= ~ENE_IRQ_STATUS;
-		reg_value |= (dev->irq & ENE_IRQ_MASK);
-		ene_write_reg(dev, ENE_IRQ, reg_value);
-	}
-
-	/* Enable inputs */
-	ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);
-	ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);
-
-	/* ack any pending irqs - just in case */
-	ene_irq_status(dev);
-
-	/* enable firmware bits */
-	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
-	/* enter idle mode */
-	ir_raw_event_set_idle(dev->idev, true);
-	dev->rx_enabled = true;
-}
-
-/* Disable the device receiver */
-static void ene_rx_disable(struct ene_device *dev)
-{
-	/* disable inputs */
-	ene_rx_enable_cir_engine(dev, false);
-	ene_rx_enable_fan_input(dev, false);
-
-	/* disable hardware IRQ and firmware flag */
-	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
-	ir_raw_event_set_idle(dev->idev, true);
-	dev->rx_enabled = false;
-}
-
-/* This resets the receiver. Usefull to stop stream of spaces at end of
- * transmission
- */
-static void ene_rx_reset(struct ene_device *dev)
-{
-	ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
-	ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
-}
-
-/* Set up the TX carrier frequency and duty cycle */
-static void ene_tx_set_carrier(struct ene_device *dev)
-{
-	u8 tx_puls_width;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-
-	ene_set_clear_reg_mask(dev, ENE_CIRCFG,
-		ENE_CIRCFG_TX_CARR, dev->tx_period > 0);
-
-	if (!dev->tx_period)
-		goto unlock;
-
-	BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);
-
-	tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);
-
-	if (!tx_puls_width)
-		tx_puls_width = 1;
-
-	dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);
-	dbg("TX: pulse width = %d * 500 ns", tx_puls_width);
-
-	ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);
-	ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);
-unlock:
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* Enable/disable transmitters */
-static void ene_tx_set_transmitters(struct ene_device *dev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,
-					!!(dev->transmitter_mask & 0x01));
-	ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,
-					!!(dev->transmitter_mask & 0x02));
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* prepare transmission */
-static void ene_tx_enable(struct ene_device *dev)
-{
-	u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);
-	u8 fwreg2 = ene_read_reg(dev, ENE_FW2);
-
-	dev->saved_conf1 = conf1;
-
-	/* Show information about currently connected transmitter jacks */
-	if (fwreg2 & ENE_FW2_EMMITER1_CONN)
-		dbg("TX: Transmitter #1 is connected");
-
-	if (fwreg2 & ENE_FW2_EMMITER2_CONN)
-		dbg("TX: Transmitter #2 is connected");
-
-	if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
-		ene_warn("TX: transmitter cable isn't connected!");
-
-	/* disable receive on revc */
-	if (dev->hw_revision == ENE_HW_C)
-		conf1 &= ~ENE_CIRCFG_RX_EN;
-
-	/* Enable TX engine */
-	conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;
-	ene_write_reg(dev, ENE_CIRCFG, conf1);
-}
-
-/* end transmission */
-static void ene_tx_disable(struct ene_device *dev)
-{
-	ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);
-	dev->tx_buffer = NULL;
-}
-
-
-/* TX one sample - must be called with dev->hw_lock*/
-static void ene_tx_sample(struct ene_device *dev)
-{
-	u8 raw_tx;
-	u32 sample;
-	bool pulse = dev->tx_sample_pulse;
-
-	if (!dev->tx_buffer) {
-		ene_warn("TX: BUG: attempt to transmit NULL buffer");
-		return;
-	}
-
-	/* Grab next TX sample */
-	if (!dev->tx_sample) {
-
-		if (dev->tx_pos == dev->tx_len) {
-			if (!dev->tx_done) {
-				dbg("TX: no more data to send");
-				dev->tx_done = true;
-				goto exit;
-			} else {
-				dbg("TX: last sample sent by hardware");
-				ene_tx_disable(dev);
-				complete(&dev->tx_complete);
-				return;
-			}
-		}
-
-		sample = dev->tx_buffer[dev->tx_pos++];
-		dev->tx_sample_pulse = !dev->tx_sample_pulse;
-
-		dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);
-
-		if (!dev->tx_sample)
-			dev->tx_sample = 1;
-	}
-
-	raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);
-	dev->tx_sample -= raw_tx;
-
-	dbg("TX: sample %8d (%s)", raw_tx * sample_period,
-						pulse ? "pulse" : "space");
-	if (pulse)
-		raw_tx |= ENE_CIRRLC_OUT_PULSE;
-
-	ene_write_reg(dev,
-		dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);
-
-	dev->tx_reg = !dev->tx_reg;
-exit:
-	/* simulate TX done interrupt */
-	if (txsim)
-		mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
-}
-
-/* timer to simulate tx done interrupt */
-static void ene_tx_irqsim(unsigned long data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	ene_tx_sample(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-
-/* read irq status and ack it */
-static int ene_irq_status(struct ene_device *dev)
-{
-	u8 irq_status;
-	u8 fw_flags1, fw_flags2;
-	int retval = 0;
-
-	fw_flags2 = ene_read_reg(dev, ENE_FW2);
-
-	if (dev->hw_revision < ENE_HW_C) {
-		irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);
-
-		if (!(irq_status & ENEB_IRQ_STATUS_IR))
-			return 0;
-
-		ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);
-		return ENE_IRQ_RX;
-	}
-
-	irq_status = ene_read_reg(dev, ENE_IRQ);
-	if (!(irq_status & ENE_IRQ_STATUS))
-		return 0;
-
-	/* original driver does that twice - a workaround ? */
-	ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
-	ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
-
-	/* check RX interrupt */
-	if (fw_flags2 & ENE_FW2_RXIRQ) {
-		retval |= ENE_IRQ_RX;
-		ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);
-	}
-
-	/* check TX interrupt */
-	fw_flags1 = ene_read_reg(dev, ENE_FW1);
-	if (fw_flags1 & ENE_FW1_TXIRQ) {
-		ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
-		retval |= ENE_IRQ_TX;
-	}
-
-	return retval;
-}
-
-/* interrupt handler */
-static irqreturn_t ene_isr(int irq, void *data)
-{
-	u16 hw_value, reg;
-	int hw_sample, irq_status;
-	bool pulse;
-	unsigned long flags;
-	irqreturn_t retval = IRQ_NONE;
-	struct ene_device *dev = (struct ene_device *)data;
-	DEFINE_IR_RAW_EVENT(ev);
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-
-	dbg_verbose("ISR called");
-	ene_rx_read_hw_pointer(dev);
-	irq_status = ene_irq_status(dev);
-
-	if (!irq_status)
-		goto unlock;
-
-	retval = IRQ_HANDLED;
-
-	if (irq_status & ENE_IRQ_TX) {
-		dbg_verbose("TX interrupt");
-		if (!dev->hw_learning_and_tx_capable) {
-			dbg("TX interrupt on unsupported device!");
-			goto unlock;
-		}
-		ene_tx_sample(dev);
-	}
-
-	if (!(irq_status & ENE_IRQ_RX))
-		goto unlock;
-
-	dbg_verbose("RX interrupt");
-
-	if (dev->hw_learning_and_tx_capable)
-		ene_rx_sense_carrier(dev);
-
-	/* On hardware that don't support extra buffer we need to trust
-		the interrupt and not track the read pointer */
-	if (!dev->hw_extra_buffer)
-		dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;
-
-	while (1) {
-
-		reg = ene_rx_get_sample_reg(dev);
-
-		dbg_verbose("next sample to read at: %04x", reg);
-		if (!reg)
-			break;
-
-		hw_value = ene_read_reg(dev, reg);
-
-		if (dev->rx_fan_input_inuse) {
-
-			int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;
-
-			/* read high part of the sample */
-			hw_value |= ene_read_reg(dev, reg + offset) << 8;
-			pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;
-
-			/* clear space bit, and other unused bits */
-			hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;
-			hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;
-
-		} else {
-			pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);
-			hw_value &= ~ENE_FW_SAMPLE_SPACE;
-			hw_sample = hw_value * sample_period;
-
-			if (dev->rx_period_adjust) {
-				hw_sample *= 100;
-				hw_sample /= (100 + dev->rx_period_adjust);
-			}
-		}
-
-		if (!dev->hw_extra_buffer && !hw_sample) {
-			dev->r_pointer = dev->w_pointer;
-			continue;
-		}
-
-		dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
-
-		ev.duration = MS_TO_NS(hw_sample);
-		ev.pulse = pulse;
-		ir_raw_event_store_with_filter(dev->idev, &ev);
-	}
-
-	ir_raw_event_handle(dev->idev);
-unlock:
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-	return retval;
-}
-
-/* Initialize default settings */
-static void ene_setup_default_settings(struct ene_device *dev)
-{
-	dev->tx_period = 32;
-	dev->tx_duty_cycle = 50; /*%*/
-	dev->transmitter_mask = 0x03;
-	dev->learning_mode_enabled = learning_mode_force;
-
-	/* Set reasonable default timeout */
-	dev->props->timeout = MS_TO_NS(150000);
-}
-
-/* Upload all hardware settings at once. Used at load and resume time */
-static void ene_setup_hw_settings(struct ene_device *dev)
-{
-	if (dev->hw_learning_and_tx_capable) {
-		ene_tx_set_carrier(dev);
-		ene_tx_set_transmitters(dev);
-	}
-
-	ene_rx_setup(dev);
-}
-
-/* outside interface: called on first open*/
-static int ene_open(void *data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	ene_rx_enable(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-	return 0;
-}
-
-/* outside interface: called on device close*/
-static void ene_close(void *data)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-	spin_lock_irqsave(&dev->hw_lock, flags);
-
-	ene_rx_disable(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* outside interface: set transmitter mask */
-static int ene_set_tx_mask(void *data, u32 tx_mask)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	dbg("TX: attempt to set transmitter mask %02x", tx_mask);
-
-	/* invalid txmask */
-	if (!tx_mask || tx_mask & ~0x03) {
-		dbg("TX: invalid mask");
-		/* return count of transmitters */
-		return 2;
-	}
-
-	dev->transmitter_mask = tx_mask;
-	ene_tx_set_transmitters(dev);
-	return 0;
-}
-
-/* outside interface : set tx carrier */
-static int ene_set_tx_carrier(void *data, u32 carrier)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	u32 period = 2000000 / carrier;
-
-	dbg("TX: attempt to set tx carrier to %d kHz", carrier);
-
-	if (period && (period > ENE_CIRMOD_PRD_MAX ||
-			period < ENE_CIRMOD_PRD_MIN)) {
-
-		dbg("TX: out of range %d-%d kHz carrier",
-			2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);
-		return -1;
-	}
-
-	dev->tx_period = period;
-	ene_tx_set_carrier(dev);
-	return 0;
-}
-
-/*outside interface : set tx duty cycle */
-static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	dbg("TX: setting duty cycle to %d%%", duty_cycle);
-	dev->tx_duty_cycle = duty_cycle;
-	ene_tx_set_carrier(dev);
-	return 0;
-}
-
-/* outside interface: enable learning mode */
-static int ene_set_learning_mode(void *data, int enable)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-	if (enable == dev->learning_mode_enabled)
-		return 0;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	dev->learning_mode_enabled = enable;
-	ene_rx_disable(dev);
-	ene_rx_setup(dev);
-	ene_rx_enable(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-	return 0;
-}
-
-static int ene_set_carrier_report(void *data, int enable)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-
-	if (enable == dev->carrier_detect_enabled)
-		return 0;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	dev->carrier_detect_enabled = enable;
-	ene_rx_disable(dev);
-	ene_rx_setup(dev);
-	ene_rx_enable(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-	return 0;
-}
-
-/* outside interface: enable or disable idle mode */
-static void ene_set_idle(void *data, bool idle)
-{
-	if (idle) {
-		ene_rx_reset((struct ene_device *)data);
-		dbg("RX: end of data");
-	}
-}
-
-/* outside interface: transmit */
-static int ene_transmit(void *data, int *buf, u32 n)
-{
-	struct ene_device *dev = (struct ene_device *)data;
-	unsigned long flags;
-
-	dev->tx_buffer = buf;
-	dev->tx_len = n / sizeof(int);
-	dev->tx_pos = 0;
-	dev->tx_reg = 0;
-	dev->tx_done = 0;
-	dev->tx_sample = 0;
-	dev->tx_sample_pulse = 0;
-
-	dbg("TX: %d samples", dev->tx_len);
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-
-	ene_tx_enable(dev);
-
-	/* Transmit first two samples */
-	ene_tx_sample(dev);
-	ene_tx_sample(dev);
-
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-
-	if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
-		dbg("TX: timeout");
-		spin_lock_irqsave(&dev->hw_lock, flags);
-		ene_tx_disable(dev);
-		spin_unlock_irqrestore(&dev->hw_lock, flags);
-	} else
-		dbg("TX: done");
-	return n;
-}
-
-/* probe entry */
-static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
-{
-	int error = -ENOMEM;
-	struct ir_dev_props *ir_props;
-	struct input_dev *input_dev;
-	struct ene_device *dev;
-
-	/* allocate memory */
-	input_dev = input_allocate_device();
-	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!input_dev || !ir_props || !dev)
-		goto error1;
-
-	/* validate resources */
-	error = -ENODEV;
-
-	if (!pnp_port_valid(pnp_dev, 0) ||
-	    pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
-		goto error;
-
-	if (!pnp_irq_valid(pnp_dev, 0))
-		goto error;
-
-	spin_lock_init(&dev->hw_lock);
-
-	/* claim the resources */
-	error = -EBUSY;
-	dev->hw_io = pnp_port_start(pnp_dev, 0);
-	if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
-		dev->hw_io = -1;
-		dev->irq = -1;
-		goto error;
-	}
-
-	dev->irq = pnp_irq(pnp_dev, 0);
-	if (request_irq(dev->irq, ene_isr,
-			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
-		dev->irq = -1;
-		goto error;
-	}
-
-	pnp_set_drvdata(pnp_dev, dev);
-	dev->pnp_dev = pnp_dev;
-
-	/* don't allow too short/long sample periods */
-	if (sample_period < 5 || sample_period > 0x7F)
-		sample_period = ENE_DEFAULT_SAMPLE_PERIOD;
-
-	/* detect hardware version and features */
-	error = ene_hw_detect(dev);
-	if (error)
-		goto error;
-
-	if (!dev->hw_learning_and_tx_capable && txsim) {
-		dev->hw_learning_and_tx_capable = true;
-		setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
-						(long unsigned int)dev);
-		ene_warn("Simulation of TX activated");
-	}
-
-	if (!dev->hw_learning_and_tx_capable)
-		learning_mode_force = false;
-
-	ir_props->driver_type = RC_DRIVER_IR_RAW;
-	ir_props->allowed_protos = IR_TYPE_ALL;
-	ir_props->priv = dev;
-	ir_props->open = ene_open;
-	ir_props->close = ene_close;
-	ir_props->s_idle = ene_set_idle;
-
-	dev->props = ir_props;
-	dev->idev = input_dev;
-
-	if (dev->hw_learning_and_tx_capable) {
-		ir_props->s_learning_mode = ene_set_learning_mode;
-		init_completion(&dev->tx_complete);
-		ir_props->tx_ir = ene_transmit;
-		ir_props->s_tx_mask = ene_set_tx_mask;
-		ir_props->s_tx_carrier = ene_set_tx_carrier;
-		ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
-		ir_props->s_carrier_report = ene_set_carrier_report;
-	}
-
-	ene_rx_setup_hw_buffer(dev);
-	ene_setup_default_settings(dev);
-	ene_setup_hw_settings(dev);
-
-	device_set_wakeup_capable(&pnp_dev->dev, true);
-	device_set_wakeup_enable(&pnp_dev->dev, true);
-
-	if (dev->hw_learning_and_tx_capable)
-		input_dev->name = "ENE eHome Infrared Remote Transceiver";
-	else
-		input_dev->name = "ENE eHome Infrared Remote Receiver";
-
-	error = -ENODEV;
-	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
-							ENE_DRIVER_NAME))
-		goto error;
-
-	ene_notice("driver has been succesfully loaded");
-	return 0;
-error:
-	if (dev && dev->irq >= 0)
-		free_irq(dev->irq, dev);
-	if (dev && dev->hw_io >= 0)
-		release_region(dev->hw_io, ENE_IO_SIZE);
-error1:
-	input_free_device(input_dev);
-	kfree(ir_props);
-	kfree(dev);
-	return error;
-}
-
-/* main unload function */
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->hw_lock, flags);
-	ene_rx_disable(dev);
-	ene_rx_restore_hw_buffer(dev);
-	spin_unlock_irqrestore(&dev->hw_lock, flags);
-
-	free_irq(dev->irq, dev);
-	release_region(dev->hw_io, ENE_IO_SIZE);
-	ir_input_unregister(dev->idev);
-	kfree(dev->props);
-	kfree(dev);
-}
-
-/* enable wake on IR (wakes on specific button on original remote) */
-static void ene_enable_wake(struct ene_device *dev, int enable)
-{
-	enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
-	dbg("wake on IR %s", enable ? "enabled" : "disabled");
-	ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);
-}
-
-#ifdef CONFIG_PM
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_enable_wake(dev, true);
-
-	/* TODO: add support for wake pattern */
-	return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_setup_hw_settings(dev);
-
-	if (dev->rx_enabled)
-		ene_rx_enable(dev);
-
-	ene_enable_wake(dev, false);
-	return 0;
-}
-#endif
-
-static void ene_shutdown(struct pnp_dev *pnp_dev)
-{
-	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
-	ene_enable_wake(dev, true);
-}
-
-static const struct pnp_device_id ene_ids[] = {
-	{.id = "ENE0100",},
-	{.id = "ENE0200",},
-	{.id = "ENE0201",},
-	{.id = "ENE0202",},
-	{},
-};
-
-static struct pnp_driver ene_driver = {
-	.name = ENE_DRIVER_NAME,
-	.id_table = ene_ids,
-	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
-	.probe = ene_probe,
-	.remove = __devexit_p(ene_remove),
-#ifdef CONFIG_PM
-	.suspend = ene_suspend,
-	.resume = ene_resume,
-#endif
-	.shutdown = ene_shutdown,
-};
-
-static int __init ene_init(void)
-{
-	return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
-	pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
-
-module_param(learning_mode_force, bool, S_IRUGO);
-MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level");
-
-module_param(txsim, bool, S_IRUGO);
-MODULE_PARM_DESC(txsim,
-	"Simulate TX features on unsupported hardware (dangerous)");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
-	("Infrared input driver for KB3926B/C/D/E/F "
-	"(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
-
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
deleted file mode 100644
index f5870667a433..000000000000
--- a/drivers/media/IR/ene_ir.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
- *
- * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#include <linux/spinlock.h>
-
-
-/* hardware address */
-#define ENE_STATUS		0	/* hardware status - unused */
-#define ENE_ADDR_HI		1	/* hi byte of register address */
-#define ENE_ADDR_LO		2	/* low byte of register address */
-#define ENE_IO			3	/* read/write window */
-#define ENE_IO_SIZE		4
-
-/* 8 bytes of samples, divided in 2 packets*/
-#define ENE_FW_SAMPLE_BUFFER	0xF8F0	/* sample buffer */
-#define ENE_FW_SAMPLE_SPACE	0x80	/* sample is space */
-#define ENE_FW_PACKET_SIZE	4
-
-/* first firmware flag register */
-#define ENE_FW1			0xF8F8  /* flagr */
-#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
-#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
-#define ENE_FW1_HAS_EXTRA_BUF	0x04	/* fw uses extra buffer*/
-#define ENE_FW1_EXTRA_BUF_HND	0x08	/* extra buffer handshake bit*/
-#define ENE_FW1_LED_ON		0x10	/* turn on a led */
-
-#define ENE_FW1_WPATTERN	0x20	/* enable wake pattern */
-#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
-#define ENE_FW1_IRQ		0x80	/* enable interrupt */
-
-/* second firmware flag register */
-#define ENE_FW2			0xF8F9  /* flagw */
-#define ENE_FW2_BUF_WPTR	0x01	/* which half of the buffer to read */
-#define ENE_FW2_RXIRQ		0x04	/* RX IRQ pending*/
-#define ENE_FW2_GP0A		0x08	/* Use GPIO0A for demodulated input */
-#define ENE_FW2_EMMITER1_CONN	0x10	/* TX emmiter 1 connected */
-#define ENE_FW2_EMMITER2_CONN	0x20	/* TX emmiter 2 connected */
-
-#define ENE_FW2_FAN_INPUT	0x40	/* fan input used for demodulated data*/
-#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
-
-/* firmware RX pointer for new style buffer */
-#define ENE_FW_RX_POINTER	0xF8FA
-
-/* high parts of samples for fan input (8 samples)*/
-#define ENE_FW_SMPL_BUF_FAN	0xF8FB
-#define ENE_FW_SMPL_BUF_FAN_PLS	0x8000	/* combined sample is pulse */
-#define ENE_FW_SMPL_BUF_FAN_MSK	0x0FFF  /* combined sample maximum value */
-#define ENE_FW_SAMPLE_PERIOD_FAN 61	/* fan input has fixed sample period */
-
-/* transmitter ports */
-#define ENE_GPIOFS1		0xFC01
-#define ENE_GPIOFS1_GPIO0D	0x20	/* enable tx output on GPIO0D */
-#define ENE_GPIOFS8		0xFC08
-#define ENE_GPIOFS8_GPIO41	0x02	/* enable tx output on GPIO40 */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ		0xFD09	/* IRQ number */
-#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
-#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
-#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
-
-/* fan as input settings */
-#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN	0xCD
-#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN	0x03
-
-/* IRQ registers block (for revision C,D) */
-#define ENE_IRQ			0xFE9B	/* new irq settings register */
-#define ENE_IRQ_MASK		0x0F	/* irq number mask */
-#define ENE_IRQ_UNK_EN		0x10	/* always enabled */
-#define ENE_IRQ_STATUS		0x20	/* irq status and ACK */
-
-/* CIR Config register #1 */
-#define ENE_CIRCFG		0xFEC0
-#define ENE_CIRCFG_RX_EN	0x01	/* RX enable */
-#define ENE_CIRCFG_RX_IRQ	0x02	/* Enable hardware interrupt */
-#define ENE_CIRCFG_REV_POL	0x04	/* Input polarity reversed */
-#define ENE_CIRCFG_CARR_DEMOD	0x08	/* Enable carrier demodulator */
-
-#define ENE_CIRCFG_TX_EN	0x10	/* TX enable */
-#define ENE_CIRCFG_TX_IRQ	0x20	/* Send interrupt on TX done */
-#define ENE_CIRCFG_TX_POL_REV	0x40	/* TX polarity reversed */
-#define ENE_CIRCFG_TX_CARR	0x80	/* send TX carrier or not */
-
-/* CIR config register #2 */
-#define ENE_CIRCFG2		0xFEC1
-#define ENE_CIRCFG2_RLC		0x00
-#define ENE_CIRCFG2_RC5		0x01
-#define ENE_CIRCFG2_RC6		0x02
-#define ENE_CIRCFG2_NEC		0x03
-#define ENE_CIRCFG2_CARR_DETECT	0x10	/* Enable carrier detection */
-#define ENE_CIRCFG2_GPIO0A	0x20	/* Use GPIO0A instead of GPIO40 for input */
-#define ENE_CIRCFG2_FAST_SAMPL1	0x40	/* Fast leading pulse detection for RC6 */
-#define ENE_CIRCFG2_FAST_SAMPL2	0x80	/* Fast data detection for RC6 */
-
-/* Knobs for protocol decoding - will document when/if will use them */
-#define ENE_CIRPF		0xFEC2
-#define ENE_CIRHIGH		0xFEC3
-#define ENE_CIRBIT		0xFEC4
-#define ENE_CIRSTART		0xFEC5
-#define ENE_CIRSTART2		0xFEC6
-
-/* Actual register which contains RLC RX data - read by firmware */
-#define ENE_CIRDAT_IN		0xFEC7
-
-
-/* RLC configuration - sample period (1us resulution) + idle mode */
-#define ENE_CIRRLC_CFG		0xFEC8
-#define ENE_CIRRLC_CFG_OVERFLOW	0x80	/* interrupt on overflows if set */
-#define ENE_DEFAULT_SAMPLE_PERIOD 50
-
-/* Two byte RLC TX buffer */
-#define ENE_CIRRLC_OUT0		0xFEC9
-#define ENE_CIRRLC_OUT1		0xFECA
-#define ENE_CIRRLC_OUT_PULSE	0x80	/* Transmitted sample is pulse */
-#define ENE_CIRRLC_OUT_MASK	0x7F
-
-
-/* Carrier detect setting
- * Low nibble  - number of carrier pulses to average
- * High nibble - number of initial carrier pulses to discard
- */
-#define ENE_CIRCAR_PULS		0xFECB
-
-/* detected RX carrier period (resolution: 500 ns) */
-#define ENE_CIRCAR_PRD		0xFECC
-#define ENE_CIRCAR_PRD_VALID	0x80	/* data valid content valid */
-
-/* detected RX carrier pulse width (resolution: 500 ns) */
-#define ENE_CIRCAR_HPRD		0xFECD
-
-/* TX period (resolution: 500 ns, minimum 2)*/
-#define ENE_CIRMOD_PRD		0xFECE
-#define ENE_CIRMOD_PRD_POL	0x80	/* TX carrier polarity*/
-
-#define ENE_CIRMOD_PRD_MAX	0x7F	/* 15.87 kHz */
-#define ENE_CIRMOD_PRD_MIN	0x02	/* 1 Mhz */
-
-/* TX pulse width (resolution: 500 ns)*/
-#define ENE_CIRMOD_HPRD		0xFECF
-
-/* Hardware versions */
-#define ENE_ECHV		0xFF00	/* hardware revision */
-#define ENE_PLLFRH		0xFF16
-#define ENE_PLLFRL		0xFF17
-#define ENE_DEFAULT_PLL_FREQ	1000
-
-#define ENE_ECSTS		0xFF1D
-#define ENE_ECSTS_RSRVD		0x04
-
-#define ENE_ECVER_MAJOR		0xFF1E	/* chip version */
-#define ENE_ECVER_MINOR		0xFF1F
-#define ENE_HW_VER_OLD		0xFD00
-
-/******************************************************************************/
-
-#define ENE_DRIVER_NAME		"ene_ir"
-
-#define ENE_IRQ_RX		1
-#define ENE_IRQ_TX		2
-
-#define  ENE_HW_B		1	/* 3926B */
-#define  ENE_HW_C		2	/* 3926C */
-#define  ENE_HW_D		3	/* 3926D or later */
-
-#define ene_printk(level, text, ...) \
-	printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
-
-#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
-#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
-
-
-#define __dbg(level, format, ...) \
-	do { \
-		if (debug >= level) \
-			printk(KERN_DEBUG ENE_DRIVER_NAME \
-				": " format "\n", ## __VA_ARGS__); \
-	} while (0)
-
-
-#define dbg(format, ...)		__dbg(1, format, ## __VA_ARGS__)
-#define dbg_verbose(format, ...)	__dbg(2, format, ## __VA_ARGS__)
-#define dbg_regs(format, ...)		__dbg(3, format, ## __VA_ARGS__)
-
-#define MS_TO_NS(msec) ((msec) * 1000)
-
-struct ene_device {
-	struct pnp_dev *pnp_dev;
-	struct input_dev *idev;
-	struct ir_dev_props *props;
-
-	/* hw IO settings */
-	long hw_io;
-	int irq;
-	spinlock_t hw_lock;
-
-	/* HW features */
-	int hw_revision;			/* hardware revision */
-	bool hw_use_gpio_0a;			/* gpio0a is demodulated input*/
-	bool hw_extra_buffer;			/* hardware has 'extra buffer' */
-	bool hw_fan_input;			/* fan input is IR data source */
-	bool hw_learning_and_tx_capable;	/* learning & tx capable */
-	int  pll_freq;
-	int buffer_len;
-
-	/* Extra RX buffer location */
-	int extra_buf1_address;
-	int extra_buf1_len;
-	int extra_buf2_address;
-	int extra_buf2_len;
-
-	/* HW state*/
-	int r_pointer;				/* pointer to next sample to read */
-	int w_pointer;				/* pointer to next sample hw will write */
-	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
-	int tx_reg;				/* current reg used for TX */
-	u8  saved_conf1;			/* saved FEC0 reg */
-	unsigned int tx_sample;			/* current sample for TX */
-	bool tx_sample_pulse;			/* current sample is pulse */
-
-	/* TX buffer */
-	int *tx_buffer;				/* input samples buffer*/
-	int tx_pos;				/* position in that bufer */
-	int tx_len;				/* current len of tx buffer */
-	int tx_done;				/* done transmitting */
-						/* one more sample pending*/
-	struct completion tx_complete;		/* TX completion */
-	struct timer_list tx_sim_timer;
-
-	/* TX settings */
-	int tx_period;
-	int tx_duty_cycle;
-	int transmitter_mask;
-
-	/* RX settings */
-	bool learning_mode_enabled;		/* learning input enabled */
-	bool carrier_detect_enabled;		/* carrier detect enabled */
-	int rx_period_adjust;
-	bool rx_enabled;
-};
-
-static int ene_irq_status(struct ene_device *dev);
-static void ene_rx_read_hw_pointer(struct ene_device *dev);
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
deleted file mode 100644
index 79f4f58c2ea4..000000000000
--- a/drivers/media/IR/imon.c
+++ /dev/null
@@ -1,2465 +0,0 @@
-/*
- *   imon.c:	input and display driver for SoundGraph iMON IR/VFD/LCD
- *
- *   Copyright(C) 2010  Jarod Wilson <jarod@wilsonet.com>
- *   Portions based on the original lirc_imon driver,
- *	Copyright(C) 2004  Venky Raju(dev@venky.ws)
- *
- *   Huge thanks to R. Geoff Newbury for invaluable debugging on the
- *   0xffdc iMON devices, and for sending me one to hack on, without
- *   which the support for them wouldn't be nearly as good. Thanks
- *   also to the numerous 0xffdc device owners that tested auto-config
- *   support for me and provided debug dumps from their devices.
- *
- *   imon is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#include <linux/time.h>
-#include <linux/timer.h>
-
-#define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
-#define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
-#define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.2"
-
-#define DISPLAY_MINOR_BASE	144
-#define DEVICE_NAME	"lcd%d"
-
-#define BUF_CHUNK_SIZE	8
-#define BUF_SIZE	128
-
-#define BIT_DURATION	250	/* each bit received is 250us */
-
-#define IMON_CLOCK_ENABLE_PACKETS	2
-
-/*** P R O T O T Y P E S ***/
-
-/* USB Callback prototypes */
-static int imon_probe(struct usb_interface *interface,
-		      const struct usb_device_id *id);
-static void imon_disconnect(struct usb_interface *interface);
-static void usb_rx_callback_intf0(struct urb *urb);
-static void usb_rx_callback_intf1(struct urb *urb);
-static void usb_tx_callback(struct urb *urb);
-
-/* suspend/resume support */
-static int imon_resume(struct usb_interface *intf);
-static int imon_suspend(struct usb_interface *intf, pm_message_t message);
-
-/* Display file_operations function prototypes */
-static int display_open(struct inode *inode, struct file *file);
-static int display_close(struct inode *inode, struct file *file);
-
-/* VFD write operation */
-static ssize_t vfd_write(struct file *file, const char *buf,
-			 size_t n_bytes, loff_t *pos);
-
-/* LCD file_operations override function prototypes */
-static ssize_t lcd_write(struct file *file, const char *buf,
-			 size_t n_bytes, loff_t *pos);
-
-/*** G L O B A L S ***/
-
-struct imon_context {
-	struct device *dev;
-	struct ir_dev_props *props;
-	/* Newer devices have two interfaces */
-	struct usb_device *usbdev_intf0;
-	struct usb_device *usbdev_intf1;
-
-	bool display_supported;		/* not all controllers do */
-	bool display_isopen;		/* display port has been opened */
-	bool rf_device;			/* true if iMON 2.4G LT/DT RF device */
-	bool rf_isassociating;		/* RF remote associating */
-	bool dev_present_intf0;		/* USB device presence, interface 0 */
-	bool dev_present_intf1;		/* USB device presence, interface 1 */
-
-	struct mutex lock;		/* to lock this object */
-	wait_queue_head_t remove_ok;	/* For unexpected USB disconnects */
-
-	struct usb_endpoint_descriptor *rx_endpoint_intf0;
-	struct usb_endpoint_descriptor *rx_endpoint_intf1;
-	struct usb_endpoint_descriptor *tx_endpoint;
-	struct urb *rx_urb_intf0;
-	struct urb *rx_urb_intf1;
-	struct urb *tx_urb;
-	bool tx_control;
-	unsigned char usb_rx_buf[8];
-	unsigned char usb_tx_buf[8];
-
-	struct tx_t {
-		unsigned char data_buf[35];	/* user data buffer */
-		struct completion finished;	/* wait for write to finish */
-		bool busy;			/* write in progress */
-		int status;			/* status of tx completion */
-	} tx;
-
-	u16 vendor;			/* usb vendor ID */
-	u16 product;			/* usb product ID */
-
-	struct input_dev *rdev;		/* input device for remote */
-	struct input_dev *idev;		/* input device for panel & IR mouse */
-	struct input_dev *touch;	/* input device for touchscreen */
-
-	spinlock_t kc_lock;		/* make sure we get keycodes right */
-	u32 kc;				/* current input keycode */
-	u32 last_keycode;		/* last reported input keycode */
-	u32 rc_scancode;		/* the computed remote scancode */
-	u8 rc_toggle;			/* the computed remote toggle bit */
-	u64 ir_type;			/* iMON or MCE (RC6) IR protocol? */
-	bool release_code;		/* some keys send a release code */
-
-	u8 display_type;		/* store the display type */
-	bool pad_mouse;			/* toggle kbd(0)/mouse(1) mode */
-
-	char name_rdev[128];		/* rc input device name */
-	char phys_rdev[64];		/* rc input device phys path */
-
-	char name_idev[128];		/* input device name */
-	char phys_idev[64];		/* input device phys path */
-
-	char name_touch[128];		/* touch screen name */
-	char phys_touch[64];		/* touch screen phys path */
-	struct timer_list ttimer;	/* touch screen timer */
-	int touch_x;			/* x coordinate on touchscreen */
-	int touch_y;			/* y coordinate on touchscreen */
-};
-
-#define TOUCH_TIMEOUT	(HZ/30)
-
-/* vfd character device file operations */
-static const struct file_operations vfd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= &display_open,
-	.write		= &vfd_write,
-	.release	= &display_close,
-	.llseek		= noop_llseek,
-};
-
-/* lcd character device file operations */
-static const struct file_operations lcd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= &display_open,
-	.write		= &lcd_write,
-	.release	= &display_close,
-	.llseek		= noop_llseek,
-};
-
-enum {
-	IMON_DISPLAY_TYPE_AUTO = 0,
-	IMON_DISPLAY_TYPE_VFD  = 1,
-	IMON_DISPLAY_TYPE_LCD  = 2,
-	IMON_DISPLAY_TYPE_VGA  = 3,
-	IMON_DISPLAY_TYPE_NONE = 4,
-};
-
-enum {
-	IMON_KEY_IMON	= 0,
-	IMON_KEY_MCE	= 1,
-	IMON_KEY_PANEL	= 2,
-};
-
-/*
- * USB Device ID for iMON USB Control Boards
- *
- * The Windows drivers contain 6 different inf files, more or less one for
- * each new device until the 0x0034-0x0046 devices, which all use the same
- * driver. Some of the devices in the 34-46 range haven't been definitively
- * identified yet. Early devices have either a TriGem Computer, Inc. or a
- * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
- * devices use the SoundGraph vendor ID (0x15c2). This driver only supports
- * the ffdc and later devices, which do onboard decoding.
- */
-static struct usb_device_id imon_usb_id_table[] = {
-	/*
-	 * Several devices with this same device ID, all use iMON_PAD.inf
-	 * SoundGraph iMON PAD (IR & VFD)
-	 * SoundGraph iMON PAD (IR & LCD)
-	 * SoundGraph iMON Knob (IR only)
-	 */
-	{ USB_DEVICE(0x15c2, 0xffdc) },
-
-	/*
-	 * Newer devices, all driven by the latest iMON Windows driver, full
-	 * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
-	 * Need user input to fill in details on unknown devices.
-	 */
-	/* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
-	{ USB_DEVICE(0x15c2, 0x0034) },
-	/* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
-	{ USB_DEVICE(0x15c2, 0x0035) },
-	/* SoundGraph iMON OEM VFD (IR & VFD) */
-	{ USB_DEVICE(0x15c2, 0x0036) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x0037) },
-	/* SoundGraph iMON OEM LCD (IR & LCD) */
-	{ USB_DEVICE(0x15c2, 0x0038) },
-	/* SoundGraph iMON UltraBay (IR & LCD) */
-	{ USB_DEVICE(0x15c2, 0x0039) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x003a) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x003b) },
-	/* SoundGraph iMON OEM Inside (IR only) */
-	{ USB_DEVICE(0x15c2, 0x003c) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x003d) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x003e) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x003f) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x0040) },
-	/* SoundGraph iMON MINI (IR only) */
-	{ USB_DEVICE(0x15c2, 0x0041) },
-	/* Antec Veris Multimedia Station EZ External (IR only) */
-	{ USB_DEVICE(0x15c2, 0x0042) },
-	/* Antec Veris Multimedia Station Basic Internal (IR only) */
-	{ USB_DEVICE(0x15c2, 0x0043) },
-	/* Antec Veris Multimedia Station Elite (IR & VFD) */
-	{ USB_DEVICE(0x15c2, 0x0044) },
-	/* Antec Veris Multimedia Station Premiere (IR & LCD) */
-	{ USB_DEVICE(0x15c2, 0x0045) },
-	/* device specifics unknown */
-	{ USB_DEVICE(0x15c2, 0x0046) },
-	{}
-};
-
-/* USB Device data */
-static struct usb_driver imon_driver = {
-	.name		= MOD_NAME,
-	.probe		= imon_probe,
-	.disconnect	= imon_disconnect,
-	.suspend	= imon_suspend,
-	.resume		= imon_resume,
-	.id_table	= imon_usb_id_table,
-};
-
-static struct usb_class_driver imon_vfd_class = {
-	.name		= DEVICE_NAME,
-	.fops		= &vfd_fops,
-	.minor_base	= DISPLAY_MINOR_BASE,
-};
-
-static struct usb_class_driver imon_lcd_class = {
-	.name		= DEVICE_NAME,
-	.fops		= &lcd_fops,
-	.minor_base	= DISPLAY_MINOR_BASE,
-};
-
-/* imon receiver front panel/knob key table */
-static const struct {
-	u64 hw_code;
-	u32 keycode;
-} imon_panel_key_table[] = {
-	{ 0x000000000f00ffeell, KEY_PROG1 }, /* Go */
-	{ 0x000000001f00ffeell, KEY_AUDIO },
-	{ 0x000000002000ffeell, KEY_VIDEO },
-	{ 0x000000002100ffeell, KEY_CAMERA },
-	{ 0x000000002700ffeell, KEY_DVD },
-	{ 0x000000002300ffeell, KEY_TV },
-	{ 0x000000000500ffeell, KEY_PREVIOUS },
-	{ 0x000000000700ffeell, KEY_REWIND },
-	{ 0x000000000400ffeell, KEY_STOP },
-	{ 0x000000003c00ffeell, KEY_PLAYPAUSE },
-	{ 0x000000000800ffeell, KEY_FASTFORWARD },
-	{ 0x000000000600ffeell, KEY_NEXT },
-	{ 0x000000010000ffeell, KEY_RIGHT },
-	{ 0x000001000000ffeell, KEY_LEFT },
-	{ 0x000000003d00ffeell, KEY_SELECT },
-	{ 0x000100000000ffeell, KEY_VOLUMEUP },
-	{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
-	{ 0x000000000100ffeell, KEY_MUTE },
-	/* 0xffdc iMON MCE VFD */
-	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
-	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
-	/* iMON Knob values */
-	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
-	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
-	{ 0x000008ffffffffeell, KEY_MUTE },
-};
-
-/* to prevent races between open() and disconnect(), probing, etc */
-static DEFINE_MUTEX(driver_lock);
-
-/* Module bookkeeping bits */
-MODULE_AUTHOR(MOD_AUTHOR);
-MODULE_DESCRIPTION(MOD_DESC);
-MODULE_VERSION(MOD_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
-
-static bool debug;
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
-
-/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
-static int display_type;
-module_param(display_type, int, S_IRUGO);
-MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
-		 "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
-
-static int pad_stabilize = 1;
-module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
-		 "presses in arrow key mode. 0=disable, 1=enable (default).");
-
-/*
- * In certain use cases, mouse mode isn't really helpful, and could actually
- * cause confusion, so allow disabling it when the IR device is open.
- */
-static bool nomouse;
-module_param(nomouse, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
-		 "open. 0=don't disable, 1=disable. (default: don't disable)");
-
-/* threshold at which a pad push registers as an arrow key in kbd mode */
-static int pad_thresh;
-module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
-		 "arrow key in kbd mode (default: 28)");
-
-
-static void free_imon_context(struct imon_context *ictx)
-{
-	struct device *dev = ictx->dev;
-
-	usb_free_urb(ictx->tx_urb);
-	usb_free_urb(ictx->rx_urb_intf0);
-	usb_free_urb(ictx->rx_urb_intf1);
-	kfree(ictx);
-
-	dev_dbg(dev, "%s: iMON context freed\n", __func__);
-}
-
-/**
- * Called when the Display device (e.g. /dev/lcd0)
- * is opened by the application.
- */
-static int display_open(struct inode *inode, struct file *file)
-{
-	struct usb_interface *interface;
-	struct imon_context *ictx = NULL;
-	int subminor;
-	int retval = 0;
-
-	/* prevent races with disconnect */
-	mutex_lock(&driver_lock);
-
-	subminor = iminor(inode);
-	interface = usb_find_interface(&imon_driver, subminor);
-	if (!interface) {
-		pr_err("could not find interface for minor %d\n", subminor);
-		retval = -ENODEV;
-		goto exit;
-	}
-	ictx = usb_get_intfdata(interface);
-
-	if (!ictx) {
-		pr_err("no context found for minor %d\n", subminor);
-		retval = -ENODEV;
-		goto exit;
-	}
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->display_supported) {
-		pr_err("display not supported by device\n");
-		retval = -ENODEV;
-	} else if (ictx->display_isopen) {
-		pr_err("display port is already open\n");
-		retval = -EBUSY;
-	} else {
-		ictx->display_isopen = true;
-		file->private_data = ictx;
-		dev_dbg(ictx->dev, "display port opened\n");
-	}
-
-	mutex_unlock(&ictx->lock);
-
-exit:
-	mutex_unlock(&driver_lock);
-	return retval;
-}
-
-/**
- * Called when the display device (e.g. /dev/lcd0)
- * is closed by the application.
- */
-static int display_close(struct inode *inode, struct file *file)
-{
-	struct imon_context *ictx = NULL;
-	int retval = 0;
-
-	ictx = file->private_data;
-
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->display_supported) {
-		pr_err("display not supported by device\n");
-		retval = -ENODEV;
-	} else if (!ictx->display_isopen) {
-		pr_err("display is not open\n");
-		retval = -EIO;
-	} else {
-		ictx->display_isopen = false;
-		dev_dbg(ictx->dev, "display port closed\n");
-		if (!ictx->dev_present_intf0) {
-			/*
-			 * Device disconnected before close and IR port is not
-			 * open. If IR port is open, context will be deleted by
-			 * ir_close.
-			 */
-			mutex_unlock(&ictx->lock);
-			free_imon_context(ictx);
-			return retval;
-		}
-	}
-
-	mutex_unlock(&ictx->lock);
-	return retval;
-}
-
-/**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
- */
-static int send_packet(struct imon_context *ictx)
-{
-	unsigned int pipe;
-	unsigned long timeout;
-	int interval = 0;
-	int retval = 0;
-	struct usb_ctrlrequest *control_req = NULL;
-
-	/* Check if we need to use control or interrupt urb */
-	if (!ictx->tx_control) {
-		pipe = usb_sndintpipe(ictx->usbdev_intf0,
-				      ictx->tx_endpoint->bEndpointAddress);
-		interval = ictx->tx_endpoint->bInterval;
-
-		usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
-				 ictx->usb_tx_buf,
-				 sizeof(ictx->usb_tx_buf),
-				 usb_tx_callback, ictx, interval);
-
-		ictx->tx_urb->actual_length = 0;
-	} else {
-		/* fill request into kmalloc'ed space: */
-		control_req = kmalloc(sizeof(struct usb_ctrlrequest),
-				      GFP_KERNEL);
-		if (control_req == NULL)
-			return -ENOMEM;
-
-		/* setup packet is '21 09 0200 0001 0008' */
-		control_req->bRequestType = 0x21;
-		control_req->bRequest = 0x09;
-		control_req->wValue = cpu_to_le16(0x0200);
-		control_req->wIndex = cpu_to_le16(0x0001);
-		control_req->wLength = cpu_to_le16(0x0008);
-
-		/* control pipe is endpoint 0x00 */
-		pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
-
-		/* build the control urb */
-		usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
-				     pipe, (unsigned char *)control_req,
-				     ictx->usb_tx_buf,
-				     sizeof(ictx->usb_tx_buf),
-				     usb_tx_callback, ictx);
-		ictx->tx_urb->actual_length = 0;
-	}
-
-	init_completion(&ictx->tx.finished);
-	ictx->tx.busy = true;
-	smp_rmb(); /* ensure later readers know we're busy */
-
-	retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
-	if (retval) {
-		ictx->tx.busy = false;
-		smp_rmb(); /* ensure later readers know we're not busy */
-		pr_err("error submitting urb(%d)\n", retval);
-	} else {
-		/* Wait for transmission to complete (or abort) */
-		mutex_unlock(&ictx->lock);
-		retval = wait_for_completion_interruptible(
-				&ictx->tx.finished);
-		if (retval)
-			pr_err("task interrupted\n");
-		mutex_lock(&ictx->lock);
-
-		retval = ictx->tx.status;
-		if (retval)
-			pr_err("packet tx failed (%d)\n", retval);
-	}
-
-	kfree(control_req);
-
-	/*
-	 * Induce a mandatory 5ms delay before returning, as otherwise,
-	 * send_packet can get called so rapidly as to overwhelm the device,
-	 * particularly on faster systems and/or those with quirky usb.
-	 */
-	timeout = msecs_to_jiffies(5);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(timeout);
-
-	return retval;
-}
-
-/**
- * Sends an associate packet to the iMON 2.4G.
- *
- * This might not be such a good idea, since it has an id collision with
- * some versions of the "IR & VFD" combo. The only way to determine if it
- * is an RF version is to look at the product description string. (Which
- * we currently do not fetch).
- */
-static int send_associate_24g(struct imon_context *ictx)
-{
-	int retval;
-	const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
-					  0x00, 0x00, 0x00, 0x20 };
-
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
-	if (!ictx->dev_present_intf0) {
-		pr_err("no iMON device present\n");
-		return -ENODEV;
-	}
-
-	memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
-	retval = send_packet(ictx);
-
-	return retval;
-}
-
-/**
- * Sends packets to setup and show clock on iMON display
- *
- * Arguments: year - last 2 digits of year, month - 1..12,
- * day - 1..31, dow - day of the week (0-Sun...6-Sat),
- * hour - 0..23, minute - 0..59, second - 0..59
- */
-static int send_set_imon_clock(struct imon_context *ictx,
-			       unsigned int year, unsigned int month,
-			       unsigned int day, unsigned int dow,
-			       unsigned int hour, unsigned int minute,
-			       unsigned int second)
-{
-	unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
-	int retval = 0;
-	int i;
-
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
-	switch (ictx->display_type) {
-	case IMON_DISPLAY_TYPE_LCD:
-		clock_enable_pkt[0][0] = 0x80;
-		clock_enable_pkt[0][1] = year;
-		clock_enable_pkt[0][2] = month-1;
-		clock_enable_pkt[0][3] = day;
-		clock_enable_pkt[0][4] = hour;
-		clock_enable_pkt[0][5] = minute;
-		clock_enable_pkt[0][6] = second;
-
-		clock_enable_pkt[1][0] = 0x80;
-		clock_enable_pkt[1][1] = 0;
-		clock_enable_pkt[1][2] = 0;
-		clock_enable_pkt[1][3] = 0;
-		clock_enable_pkt[1][4] = 0;
-		clock_enable_pkt[1][5] = 0;
-		clock_enable_pkt[1][6] = 0;
-
-		if (ictx->product == 0xffdc) {
-			clock_enable_pkt[0][7] = 0x50;
-			clock_enable_pkt[1][7] = 0x51;
-		} else {
-			clock_enable_pkt[0][7] = 0x88;
-			clock_enable_pkt[1][7] = 0x8a;
-		}
-
-		break;
-
-	case IMON_DISPLAY_TYPE_VFD:
-		clock_enable_pkt[0][0] = year;
-		clock_enable_pkt[0][1] = month-1;
-		clock_enable_pkt[0][2] = day;
-		clock_enable_pkt[0][3] = dow;
-		clock_enable_pkt[0][4] = hour;
-		clock_enable_pkt[0][5] = minute;
-		clock_enable_pkt[0][6] = second;
-		clock_enable_pkt[0][7] = 0x40;
-
-		clock_enable_pkt[1][0] = 0;
-		clock_enable_pkt[1][1] = 0;
-		clock_enable_pkt[1][2] = 1;
-		clock_enable_pkt[1][3] = 0;
-		clock_enable_pkt[1][4] = 0;
-		clock_enable_pkt[1][5] = 0;
-		clock_enable_pkt[1][6] = 0;
-		clock_enable_pkt[1][7] = 0x42;
-
-		break;
-
-	default:
-		return -ENODEV;
-	}
-
-	for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
-		memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
-		retval = send_packet(ictx);
-		if (retval) {
-			pr_err("send_packet failed for packet %d\n", i);
-			break;
-		}
-	}
-
-	return retval;
-}
-
-/**
- * These are the sysfs functions to handle the association on the iMON 2.4G LT.
- */
-static ssize_t show_associate_remote(struct device *d,
-				     struct device_attribute *attr,
-				     char *buf)
-{
-	struct imon_context *ictx = dev_get_drvdata(d);
-
-	if (!ictx)
-		return -ENODEV;
-
-	mutex_lock(&ictx->lock);
-	if (ictx->rf_isassociating)
-		strcpy(buf, "associating\n");
-	else
-		strcpy(buf, "closed\n");
-
-	dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
-		 "instructions on how to associate your iMON 2.4G DT/LT "
-		 "remote\n");
-	mutex_unlock(&ictx->lock);
-	return strlen(buf);
-}
-
-static ssize_t store_associate_remote(struct device *d,
-				      struct device_attribute *attr,
-				      const char *buf, size_t count)
-{
-	struct imon_context *ictx;
-
-	ictx = dev_get_drvdata(d);
-
-	if (!ictx)
-		return -ENODEV;
-
-	mutex_lock(&ictx->lock);
-	ictx->rf_isassociating = true;
-	send_associate_24g(ictx);
-	mutex_unlock(&ictx->lock);
-
-	return count;
-}
-
-/**
- * sysfs functions to control internal imon clock
- */
-static ssize_t show_imon_clock(struct device *d,
-			       struct device_attribute *attr, char *buf)
-{
-	struct imon_context *ictx = dev_get_drvdata(d);
-	size_t len;
-
-	if (!ictx)
-		return -ENODEV;
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->display_supported) {
-		len = snprintf(buf, PAGE_SIZE, "Not supported.");
-	} else {
-		len = snprintf(buf, PAGE_SIZE,
-			"To set the clock on your iMON display:\n"
-			"# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
-			"%s", ictx->display_isopen ?
-			"\nNOTE: imon device must be closed\n" : "");
-	}
-
-	mutex_unlock(&ictx->lock);
-
-	return len;
-}
-
-static ssize_t store_imon_clock(struct device *d,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	struct imon_context *ictx = dev_get_drvdata(d);
-	ssize_t retval;
-	unsigned int year, month, day, dow, hour, minute, second;
-
-	if (!ictx)
-		return -ENODEV;
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->display_supported) {
-		retval = -ENODEV;
-		goto exit;
-	} else if (ictx->display_isopen) {
-		retval = -EBUSY;
-		goto exit;
-	}
-
-	if (sscanf(buf, "%u %u %u %u %u %u %u",	&year, &month, &day, &dow,
-		   &hour, &minute, &second) != 7) {
-		retval = -EINVAL;
-		goto exit;
-	}
-
-	if ((month < 1 || month > 12) ||
-	    (day < 1 || day > 31) || (dow > 6) ||
-	    (hour > 23) || (minute > 59) || (second > 59)) {
-		retval = -EINVAL;
-		goto exit;
-	}
-
-	retval = send_set_imon_clock(ictx, year, month, day, dow,
-				     hour, minute, second);
-	if (retval)
-		goto exit;
-
-	retval = count;
-exit:
-	mutex_unlock(&ictx->lock);
-
-	return retval;
-}
-
-
-static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
-		   store_imon_clock);
-
-static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
-		   store_associate_remote);
-
-static struct attribute *imon_display_sysfs_entries[] = {
-	&dev_attr_imon_clock.attr,
-	NULL
-};
-
-static struct attribute_group imon_display_attr_group = {
-	.attrs = imon_display_sysfs_entries
-};
-
-static struct attribute *imon_rf_sysfs_entries[] = {
-	&dev_attr_associate_remote.attr,
-	NULL
-};
-
-static struct attribute_group imon_rf_attr_group = {
-	.attrs = imon_rf_sysfs_entries
-};
-
-/**
- * Writes data to the VFD.  The iMON VFD is 2x16 characters
- * and requires data in 5 consecutive USB interrupt packets,
- * each packet but the last carrying 7 bytes.
- *
- * I don't know if the VFD board supports features such as
- * scrolling, clearing rows, blanking, etc. so at
- * the caller must provide a full screen of data.  If fewer
- * than 32 bytes are provided spaces will be appended to
- * generate a full screen.
- */
-static ssize_t vfd_write(struct file *file, const char *buf,
-			 size_t n_bytes, loff_t *pos)
-{
-	int i;
-	int offset;
-	int seq;
-	int retval = 0;
-	struct imon_context *ictx;
-	const unsigned char vfd_packet6[] = {
-		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
-
-	ictx = file->private_data;
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->dev_present_intf0) {
-		pr_err("no iMON device present\n");
-		retval = -ENODEV;
-		goto exit;
-	}
-
-	if (n_bytes <= 0 || n_bytes > 32) {
-		pr_err("invalid payload size\n");
-		retval = -EINVAL;
-		goto exit;
-	}
-
-	if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
-		retval = -EFAULT;
-		goto exit;
-	}
-
-	/* Pad with spaces */
-	for (i = n_bytes; i < 32; ++i)
-		ictx->tx.data_buf[i] = ' ';
-
-	for (i = 32; i < 35; ++i)
-		ictx->tx.data_buf[i] = 0xFF;
-
-	offset = 0;
-	seq = 0;
-
-	do {
-		memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
-		ictx->usb_tx_buf[7] = (unsigned char) seq;
-
-		retval = send_packet(ictx);
-		if (retval) {
-			pr_err("send packet failed for packet #%d\n", seq / 2);
-			goto exit;
-		} else {
-			seq += 2;
-			offset += 7;
-		}
-
-	} while (offset < 35);
-
-	/* Send packet #6 */
-	memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
-	ictx->usb_tx_buf[7] = (unsigned char) seq;
-	retval = send_packet(ictx);
-	if (retval)
-		pr_err("send packet failed for packet #%d\n", seq / 2);
-
-exit:
-	mutex_unlock(&ictx->lock);
-
-	return (!retval) ? n_bytes : retval;
-}
-
-/**
- * Writes data to the LCD.  The iMON OEM LCD screen expects 8-byte
- * packets. We accept data as 16 hexadecimal digits, followed by a
- * newline (to make it easy to drive the device from a command-line
- * -- even though the actual binary data is a bit complicated).
- *
- * The device itself is not a "traditional" text-mode display. It's
- * actually a 16x96 pixel bitmap display. That means if you want to
- * display text, you've got to have your own "font" and translate the
- * text into bitmaps for display. This is really flexible (you can
- * display whatever diacritics you need, and so on), but it's also
- * a lot more complicated than most LCDs...
- */
-static ssize_t lcd_write(struct file *file, const char *buf,
-			 size_t n_bytes, loff_t *pos)
-{
-	int retval = 0;
-	struct imon_context *ictx;
-
-	ictx = file->private_data;
-	if (!ictx) {
-		pr_err("no context for device\n");
-		return -ENODEV;
-	}
-
-	mutex_lock(&ictx->lock);
-
-	if (!ictx->display_supported) {
-		pr_err("no iMON display present\n");
-		retval = -ENODEV;
-		goto exit;
-	}
-
-	if (n_bytes != 8) {
-		pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes);
-		retval = -EINVAL;
-		goto exit;
-	}
-
-	if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
-		retval = -EFAULT;
-		goto exit;
-	}
-
-	retval = send_packet(ictx);
-	if (retval) {
-		pr_err("send packet failed!\n");
-		goto exit;
-	} else {
-		dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
-			__func__, (int) n_bytes);
-	}
-exit:
-	mutex_unlock(&ictx->lock);
-	return (!retval) ? n_bytes : retval;
-}
-
-/**
- * Callback function for USB core API: transmit data
- */
-static void usb_tx_callback(struct urb *urb)
-{
-	struct imon_context *ictx;
-
-	if (!urb)
-		return;
-	ictx = (struct imon_context *)urb->context;
-	if (!ictx)
-		return;
-
-	ictx->tx.status = urb->status;
-
-	/* notify waiters that write has finished */
-	ictx->tx.busy = false;
-	smp_rmb(); /* ensure later readers know we're not busy */
-	complete(&ictx->tx.finished);
-}
-
-/**
- * report touchscreen input
- */
-static void imon_touch_display_timeout(unsigned long data)
-{
-	struct imon_context *ictx = (struct imon_context *)data;
-
-	if (ictx->display_type != IMON_DISPLAY_TYPE_VGA)
-		return;
-
-	input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
-	input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
-	input_report_key(ictx->touch, BTN_TOUCH, 0x00);
-	input_sync(ictx->touch);
-}
-
-/**
- * iMON IR receivers support two different signal sets -- those used by
- * the iMON remotes, and those used by the Windows MCE remotes (which is
- * really just RC-6), but only one or the other at a time, as the signals
- * are decoded onboard the receiver.
- */
-int imon_ir_change_protocol(void *priv, u64 ir_type)
-{
-	int retval;
-	struct imon_context *ictx = priv;
-	struct device *dev = ictx->dev;
-	bool pad_mouse;
-	unsigned char ir_proto_packet[] = {
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
-
-	if (ir_type && !(ir_type & ictx->props->allowed_protos))
-		dev_warn(dev, "Looks like you're trying to use an IR protocol "
-			 "this device does not support\n");
-
-	switch (ir_type) {
-	case IR_TYPE_RC6:
-		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
-		ir_proto_packet[0] = 0x01;
-		pad_mouse = false;
-		break;
-	case IR_TYPE_UNKNOWN:
-	case IR_TYPE_OTHER:
-		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
-		if (pad_stabilize && !nomouse)
-			pad_mouse = true;
-		else {
-			dev_dbg(dev, "PAD stabilize functionality disabled\n");
-			pad_mouse = false;
-		}
-		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
-		break;
-	default:
-		dev_warn(dev, "Unsupported IR protocol specified, overriding "
-			 "to iMON IR protocol\n");
-		if (pad_stabilize && !nomouse)
-			pad_mouse = true;
-		else {
-			dev_dbg(dev, "PAD stabilize functionality disabled\n");
-			pad_mouse = false;
-		}
-		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
-		break;
-	}
-
-	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
-
-	retval = send_packet(ictx);
-	if (retval)
-		goto out;
-
-	ictx->ir_type = ir_type;
-	ictx->pad_mouse = pad_mouse;
-
-out:
-	return retval;
-}
-
-static inline int tv2int(const struct timeval *a, const struct timeval *b)
-{
-	int usecs = 0;
-	int sec   = 0;
-
-	if (b->tv_usec > a->tv_usec) {
-		usecs = 1000000;
-		sec--;
-	}
-
-	usecs += a->tv_usec - b->tv_usec;
-
-	sec += a->tv_sec - b->tv_sec;
-	sec *= 1000;
-	usecs /= 1000;
-	sec += usecs;
-
-	if (sec < 0)
-		sec = 1000;
-
-	return sec;
-}
-
-/**
- * The directional pad behaves a bit differently, depending on whether this is
- * one of the older ffdc devices or a newer device. Newer devices appear to
- * have a higher resolution matrix for more precise mouse movement, but it
- * makes things overly sensitive in keyboard mode, so we do some interesting
- * contortions to make it less touchy. Older devices run through the same
- * routine with shorter timeout and a smaller threshold.
- */
-static int stabilize(int a, int b, u16 timeout, u16 threshold)
-{
-	struct timeval ct;
-	static struct timeval prev_time = {0, 0};
-	static struct timeval hit_time  = {0, 0};
-	static int x, y, prev_result, hits;
-	int result = 0;
-	int msec, msec_hit;
-
-	do_gettimeofday(&ct);
-	msec = tv2int(&ct, &prev_time);
-	msec_hit = tv2int(&ct, &hit_time);
-
-	if (msec > 100) {
-		x = 0;
-		y = 0;
-		hits = 0;
-	}
-
-	x += a;
-	y += b;
-
-	prev_time = ct;
-
-	if (abs(x) > threshold || abs(y) > threshold) {
-		if (abs(y) > abs(x))
-			result = (y > 0) ? 0x7F : 0x80;
-		else
-			result = (x > 0) ? 0x7F00 : 0x8000;
-
-		x = 0;
-		y = 0;
-
-		if (result == prev_result) {
-			hits++;
-
-			if (hits > 3) {
-				switch (result) {
-				case 0x7F:
-					y = 17 * threshold / 30;
-					break;
-				case 0x80:
-					y -= 17 * threshold / 30;
-					break;
-				case 0x7F00:
-					x = 17 * threshold / 30;
-					break;
-				case 0x8000:
-					x -= 17 * threshold / 30;
-					break;
-				}
-			}
-
-			if (hits == 2 && msec_hit < timeout) {
-				result = 0;
-				hits = 1;
-			}
-		} else {
-			prev_result = result;
-			hits = 1;
-			hit_time = ct;
-		}
-	}
-
-	return result;
-}
-
-static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
-{
-	u32 keycode;
-	u32 release;
-	bool is_release_code = false;
-
-	/* Look for the initial press of a button */
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
-	ictx->rc_toggle = 0x0;
-	ictx->rc_scancode = scancode;
-
-	/* Look for the release of a button */
-	if (keycode == KEY_RESERVED) {
-		release = scancode & ~0x4000;
-		keycode = ir_g_keycode_from_table(ictx->rdev, release);
-		if (keycode != KEY_RESERVED)
-			is_release_code = true;
-	}
-
-	ictx->release_code = is_release_code;
-
-	return keycode;
-}
-
-static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
-{
-	u32 keycode;
-
-#define MCE_KEY_MASK 0x7000
-#define MCE_TOGGLE_BIT 0x8000
-
-	/*
-	 * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx
-	 * (the toggle bit flipping between alternating key presses), while
-	 * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep
-	 * the table trim, we always or in the bits to look up 0x8000ff4xx,
-	 * but we can't or them into all codes, as some keys are decoded in
-	 * a different way w/o the same use of the toggle bit...
-	 */
-	if (scancode & 0x80000000)
-		scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
-
-	ictx->rc_scancode = scancode;
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
-
-	/* not used in mce mode, but make sure we know its false */
-	ictx->release_code = false;
-
-	return keycode;
-}
-
-static u32 imon_panel_key_lookup(u64 code)
-{
-	int i;
-	u32 keycode = KEY_RESERVED;
-
-	for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
-		if (imon_panel_key_table[i].hw_code == (code | 0xffee)) {
-			keycode = imon_panel_key_table[i].keycode;
-			break;
-		}
-	}
-
-	return keycode;
-}
-
-static bool imon_mouse_event(struct imon_context *ictx,
-			     unsigned char *buf, int len)
-{
-	char rel_x = 0x00, rel_y = 0x00;
-	u8 right_shift = 1;
-	bool mouse_input = true;
-	int dir = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ictx->kc_lock, flags);
-
-	/* newer iMON device PAD or mouse button */
-	if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
-		rel_x = buf[2];
-		rel_y = buf[3];
-		right_shift = 1;
-	/* 0xffdc iMON PAD or mouse button input */
-	} else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
-			!((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
-		rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
-			(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
-		if (buf[0] & 0x02)
-			rel_x |= ~0x0f;
-		rel_x = rel_x + rel_x / 2;
-		rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
-			(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
-		if (buf[0] & 0x01)
-			rel_y |= ~0x0f;
-		rel_y = rel_y + rel_y / 2;
-		right_shift = 2;
-	/* some ffdc devices decode mouse buttons differently... */
-	} else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
-		right_shift = 2;
-	/* ch+/- buttons, which we use for an emulated scroll wheel */
-	} else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
-		dir = 1;
-	} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
-		dir = -1;
-	} else
-		mouse_input = false;
-
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
-	if (mouse_input) {
-		dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
-
-		if (dir) {
-			input_report_rel(ictx->idev, REL_WHEEL, dir);
-		} else if (rel_x || rel_y) {
-			input_report_rel(ictx->idev, REL_X, rel_x);
-			input_report_rel(ictx->idev, REL_Y, rel_y);
-		} else {
-			input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
-			input_report_key(ictx->idev, BTN_RIGHT,
-					 buf[1] >> right_shift & 0x1);
-		}
-		input_sync(ictx->idev);
-		spin_lock_irqsave(&ictx->kc_lock, flags);
-		ictx->last_keycode = ictx->kc;
-		spin_unlock_irqrestore(&ictx->kc_lock, flags);
-	}
-
-	return mouse_input;
-}
-
-static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
-{
-	mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
-	ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
-	ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
-	input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
-	input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
-	input_report_key(ictx->touch, BTN_TOUCH, 0x01);
-	input_sync(ictx->touch);
-}
-
-static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
-{
-	int dir = 0;
-	char rel_x = 0x00, rel_y = 0x00;
-	u16 timeout, threshold;
-	u32 scancode = KEY_RESERVED;
-	unsigned long flags;
-
-	/*
-	 * The imon directional pad functions more like a touchpad. Bytes 3 & 4
-	 * contain a position coordinate (x,y), with each component ranging
-	 * from -14 to 14. We want to down-sample this to only 4 discrete values
-	 * for up/down/left/right arrow keys. Also, when you get too close to
-	 * diagonals, it has a tendancy to jump back and forth, so lets try to
-	 * ignore when they get too close.
-	 */
-	if (ictx->product != 0xffdc) {
-		/* first, pad to 8 bytes so it conforms with everything else */
-		buf[5] = buf[6] = buf[7] = 0;
-		timeout = 500;	/* in msecs */
-		/* (2*threshold) x (2*threshold) square */
-		threshold = pad_thresh ? pad_thresh : 28;
-		rel_x = buf[2];
-		rel_y = buf[3];
-
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
-			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
-				dir = stabilize((int)rel_x, (int)rel_y,
-						timeout, threshold);
-				if (!dir) {
-					spin_lock_irqsave(&ictx->kc_lock,
-							  flags);
-					ictx->kc = KEY_UNKNOWN;
-					spin_unlock_irqrestore(&ictx->kc_lock,
-							       flags);
-					return;
-				}
-				buf[2] = dir & 0xFF;
-				buf[3] = (dir >> 8) & 0xFF;
-				scancode = be32_to_cpu(*((u32 *)buf));
-			}
-		} else {
-			/*
-			 * Hack alert: instead of using keycodes, we have
-			 * to use hard-coded scancodes here...
-			 */
-			if (abs(rel_y) > abs(rel_x)) {
-				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
-				buf[3] = 0;
-				if (rel_y > 0)
-					scancode = 0x01007f00; /* KEY_DOWN */
-				else
-					scancode = 0x01008000; /* KEY_UP */
-			} else {
-				buf[2] = 0;
-				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
-				if (rel_x > 0)
-					scancode = 0x0100007f; /* KEY_RIGHT */
-				else
-					scancode = 0x01000080; /* KEY_LEFT */
-			}
-		}
-
-	/*
-	 * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
-	 * device (15c2:ffdc). The remote generates various codes from
-	 * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
-	 * 0x688301b7 and the right one 0x688481b7. All other keys generate
-	 * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
-	 * reversed endianess. Extract direction from buffer, rotate endianess,
-	 * adjust sign and feed the values into stabilize(). The resulting codes
-	 * will be 0x01008000, 0x01007F00, which match the newer devices.
-	 */
-	} else {
-		timeout = 10;	/* in msecs */
-		/* (2*threshold) x (2*threshold) square */
-		threshold = pad_thresh ? pad_thresh : 15;
-
-		/* buf[1] is x */
-		rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
-			(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
-		if (buf[0] & 0x02)
-			rel_x |= ~0x10+1;
-		/* buf[2] is y */
-		rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
-			(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
-		if (buf[0] & 0x01)
-			rel_y |= ~0x10+1;
-
-		buf[0] = 0x01;
-		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
-
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
-			dir = stabilize((int)rel_x, (int)rel_y,
-					timeout, threshold);
-			if (!dir) {
-				spin_lock_irqsave(&ictx->kc_lock, flags);
-				ictx->kc = KEY_UNKNOWN;
-				spin_unlock_irqrestore(&ictx->kc_lock, flags);
-				return;
-			}
-			buf[2] = dir & 0xFF;
-			buf[3] = (dir >> 8) & 0xFF;
-			scancode = be32_to_cpu(*((u32 *)buf));
-		} else {
-			/*
-			 * Hack alert: instead of using keycodes, we have
-			 * to use hard-coded scancodes here...
-			 */
-			if (abs(rel_y) > abs(rel_x)) {
-				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
-				buf[3] = 0;
-				if (rel_y > 0)
-					scancode = 0x01007f00; /* KEY_DOWN */
-				else
-					scancode = 0x01008000; /* KEY_UP */
-			} else {
-				buf[2] = 0;
-				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
-				if (rel_x > 0)
-					scancode = 0x0100007f; /* KEY_RIGHT */
-				else
-					scancode = 0x01000080; /* KEY_LEFT */
-			}
-		}
-	}
-
-	if (scancode) {
-		spin_lock_irqsave(&ictx->kc_lock, flags);
-		ictx->kc = imon_remote_key_lookup(ictx, scancode);
-		spin_unlock_irqrestore(&ictx->kc_lock, flags);
-	}
-}
-
-/**
- * figure out if these is a press or a release. We don't actually
- * care about repeats, as those will be auto-generated within the IR
- * subsystem for repeating scancodes.
- */
-static int imon_parse_press_type(struct imon_context *ictx,
-				 unsigned char *buf, u8 ktype)
-{
-	int press_type = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ictx->kc_lock, flags);
-
-	/* key release of 0x02XXXXXX key */
-	if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00)
-		ictx->kc = ictx->last_keycode;
-
-	/* mouse button release on (some) 0xffdc devices */
-	else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 &&
-		 buf[2] == 0x81 && buf[3] == 0xb7)
-		ictx->kc = ictx->last_keycode;
-
-	/* mouse button release on (some other) 0xffdc devices */
-	else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 &&
-		 buf[2] == 0x81 && buf[3] == 0xb7)
-		ictx->kc = ictx->last_keycode;
-
-	/* mce-specific button handling, no keyup events */
-	else if (ktype == IMON_KEY_MCE) {
-		ictx->rc_toggle = buf[2];
-		press_type = 1;
-
-	/* incoherent or irrelevant data */
-	} else if (ictx->kc == KEY_RESERVED)
-		press_type = -EINVAL;
-
-	/* key release of 0xXXXXXXb7 key */
-	else if (ictx->release_code)
-		press_type = 0;
-
-	/* this is a button press */
-	else
-		press_type = 1;
-
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
-	return press_type;
-}
-
-/**
- * Process the incoming packet
- */
-static void imon_incoming_packet(struct imon_context *ictx,
-				 struct urb *urb, int intf)
-{
-	int len = urb->actual_length;
-	unsigned char *buf = urb->transfer_buffer;
-	struct device *dev = ictx->dev;
-	unsigned long flags;
-	u32 kc;
-	bool norelease = false;
-	int i;
-	u64 scancode;
-	int press_type = 0;
-	int msec;
-	struct timeval t;
-	static struct timeval prev_time = { 0, 0 };
-	u8 ktype;
-
-	/* filter out junk data on the older 0xffdc imon devices */
-	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
-		return;
-
-	/* Figure out what key was pressed */
-	if (len == 8 && buf[7] == 0xee) {
-		scancode = be64_to_cpu(*((u64 *)buf));
-		ktype = IMON_KEY_PANEL;
-		kc = imon_panel_key_lookup(scancode);
-	} else {
-		scancode = be32_to_cpu(*((u32 *)buf));
-		if (ictx->ir_type == IR_TYPE_RC6) {
-			ktype = IMON_KEY_IMON;
-			if (buf[0] == 0x80)
-				ktype = IMON_KEY_MCE;
-			kc = imon_mce_key_lookup(ictx, scancode);
-		} else {
-			ktype = IMON_KEY_IMON;
-			kc = imon_remote_key_lookup(ictx, scancode);
-		}
-	}
-
-	spin_lock_irqsave(&ictx->kc_lock, flags);
-	/* keyboard/mouse mode toggle button */
-	if (kc == KEY_KEYBOARD && !ictx->release_code) {
-		ictx->last_keycode = kc;
-		if (!nomouse) {
-			ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
-			dev_dbg(dev, "toggling to %s mode\n",
-				ictx->pad_mouse ? "mouse" : "keyboard");
-			spin_unlock_irqrestore(&ictx->kc_lock, flags);
-			return;
-		} else {
-			ictx->pad_mouse = 0;
-			dev_dbg(dev, "mouse mode disabled, passing key value\n");
-		}
-	}
-
-	ictx->kc = kc;
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
-	/* send touchscreen events through input subsystem if touchpad data */
-	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
-	    buf[7] == 0x86) {
-		imon_touch_event(ictx, buf);
-		return;
-
-	/* look for mouse events with pad in mouse mode */
-	} else if (ictx->pad_mouse) {
-		if (imon_mouse_event(ictx, buf, len))
-			return;
-	}
-
-	/* Now for some special handling to convert pad input to arrow keys */
-	if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
-	    ((len == 8) && (buf[0] & 0x40) &&
-	     !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
-		len = 8;
-		imon_pad_to_keys(ictx, buf);
-		norelease = true;
-	}
-
-	if (debug) {
-		printk(KERN_INFO "intf%d decoded packet: ", intf);
-		for (i = 0; i < len; ++i)
-			printk("%02x ", buf[i]);
-		printk("\n");
-	}
-
-	press_type = imon_parse_press_type(ictx, buf, ktype);
-	if (press_type < 0)
-		goto not_input_data;
-
-	spin_lock_irqsave(&ictx->kc_lock, flags);
-	if (ictx->kc == KEY_UNKNOWN)
-		goto unknown_key;
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
-	if (ktype != IMON_KEY_PANEL) {
-		if (press_type == 0)
-			ir_keyup(ictx->rdev);
-		else {
-			ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
-			spin_lock_irqsave(&ictx->kc_lock, flags);
-			ictx->last_keycode = ictx->kc;
-			spin_unlock_irqrestore(&ictx->kc_lock, flags);
-		}
-		return;
-	}
-
-	/* Only panel type events left to process now */
-	spin_lock_irqsave(&ictx->kc_lock, flags);
-
-	/* KEY_MUTE repeats from knob need to be suppressed */
-	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
-		do_gettimeofday(&t);
-		msec = tv2int(&t, &prev_time);
-		prev_time = t;
-		if (msec < ictx->idev->rep[REP_DELAY]) {
-			spin_unlock_irqrestore(&ictx->kc_lock, flags);
-			return;
-		}
-	}
-	kc = ictx->kc;
-
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
-	input_report_key(ictx->idev, kc, press_type);
-	input_sync(ictx->idev);
-
-	/* panel keys don't generate a release */
-	input_report_key(ictx->idev, kc, 0);
-	input_sync(ictx->idev);
-
-	ictx->last_keycode = kc;
-
-	return;
-
-unknown_key:
-	spin_unlock_irqrestore(&ictx->kc_lock, flags);
-	dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__,
-		 (long long)scancode);
-	return;
-
-not_input_data:
-	if (len != 8) {
-		dev_warn(dev, "imon %s: invalid incoming packet "
-			 "size (len = %d, intf%d)\n", __func__, len, intf);
-		return;
-	}
-
-	/* iMON 2.4G associate frame */
-	if (buf[0] == 0x00 &&
-	    buf[2] == 0xFF &&				/* REFID */
-	    buf[3] == 0xFF &&
-	    buf[4] == 0xFF &&
-	    buf[5] == 0xFF &&				/* iMON 2.4G */
-	   ((buf[6] == 0x4E && buf[7] == 0xDF) ||	/* LT */
-	    (buf[6] == 0x5E && buf[7] == 0xDF))) {	/* DT */
-		dev_warn(dev, "%s: remote associated refid=%02X\n",
-			 __func__, buf[1]);
-		ictx->rf_isassociating = false;
-	}
-}
-
-/**
- * Callback function for USB core API: receive data
- */
-static void usb_rx_callback_intf0(struct urb *urb)
-{
-	struct imon_context *ictx;
-	int intfnum = 0;
-
-	if (!urb)
-		return;
-
-	ictx = (struct imon_context *)urb->context;
-	if (!ictx)
-		return;
-
-	switch (urb->status) {
-	case -ENOENT:		/* usbcore unlink successful! */
-		return;
-
-	case -ESHUTDOWN:	/* transport endpoint was shut down */
-		break;
-
-	case 0:
-		imon_incoming_packet(ictx, urb, intfnum);
-		break;
-
-	default:
-		dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
-			 __func__, urb->status);
-		break;
-	}
-
-	usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
-}
-
-static void usb_rx_callback_intf1(struct urb *urb)
-{
-	struct imon_context *ictx;
-	int intfnum = 1;
-
-	if (!urb)
-		return;
-
-	ictx = (struct imon_context *)urb->context;
-	if (!ictx)
-		return;
-
-	switch (urb->status) {
-	case -ENOENT:		/* usbcore unlink successful! */
-		return;
-
-	case -ESHUTDOWN:	/* transport endpoint was shut down */
-		break;
-
-	case 0:
-		imon_incoming_packet(ictx, urb, intfnum);
-		break;
-
-	default:
-		dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
-			 __func__, urb->status);
-		break;
-	}
-
-	usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
-}
-
-/*
- * The 0x15c2:0xffdc device ID was used for umpteen different imon
- * devices, and all of them constantly spew interrupts, even when there
- * is no actual data to report. However, byte 6 of this buffer looks like
- * its unique across device variants, so we're trying to key off that to
- * figure out which display type (if any) and what IR protocol the device
- * actually supports. These devices have their IR protocol hard-coded into
- * their firmware, they can't be changed on the fly like the newer hardware.
- */
-static void imon_get_ffdc_type(struct imon_context *ictx)
-{
-	u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
-	u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
-	u64 allowed_protos = IR_TYPE_OTHER;
-
-	switch (ffdc_cfg_byte) {
-	/* iMON Knob, no display, iMON IR + vol knob */
-	case 0x21:
-		dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
-		ictx->display_supported = false;
-		break;
-	/* iMON 2.4G LT (usb stick), no display, iMON RF */
-	case 0x4e:
-		dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
-		ictx->display_supported = false;
-		ictx->rf_device = true;
-		break;
-	/* iMON VFD, no IR (does have vol knob tho) */
-	case 0x35:
-		dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
-		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		break;
-	/* iMON VFD, iMON IR */
-	case 0x24:
-	case 0x85:
-		dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR");
-		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		break;
-	/* iMON VFD, MCE IR */
-	case 0x9e:
-		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
-		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		allowed_protos = IR_TYPE_RC6;
-		break;
-	/* iMON LCD, MCE IR */
-	case 0x9f:
-		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
-		detected_display_type = IMON_DISPLAY_TYPE_LCD;
-		allowed_protos = IR_TYPE_RC6;
-		break;
-	default:
-		dev_info(ictx->dev, "Unknown 0xffdc device, "
-			 "defaulting to VFD and iMON IR");
-		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		break;
-	}
-
-	printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
-
-	ictx->display_type = detected_display_type;
-	ictx->props->allowed_protos = allowed_protos;
-	ictx->ir_type = allowed_protos;
-}
-
-static void imon_set_display_type(struct imon_context *ictx)
-{
-	u8 configured_display_type = IMON_DISPLAY_TYPE_VFD;
-
-	/*
-	 * Try to auto-detect the type of display if the user hasn't set
-	 * it by hand via the display_type modparam. Default is VFD.
-	 */
-
-	if (display_type == IMON_DISPLAY_TYPE_AUTO) {
-		switch (ictx->product) {
-		case 0xffdc:
-			/* set in imon_get_ffdc_type() */
-			configured_display_type = ictx->display_type;
-			break;
-		case 0x0034:
-		case 0x0035:
-			configured_display_type = IMON_DISPLAY_TYPE_VGA;
-			break;
-		case 0x0038:
-		case 0x0039:
-		case 0x0045:
-			configured_display_type = IMON_DISPLAY_TYPE_LCD;
-			break;
-		case 0x003c:
-		case 0x0041:
-		case 0x0042:
-		case 0x0043:
-			configured_display_type = IMON_DISPLAY_TYPE_NONE;
-			ictx->display_supported = false;
-			break;
-		case 0x0036:
-		case 0x0044:
-		default:
-			configured_display_type = IMON_DISPLAY_TYPE_VFD;
-			break;
-		}
-	} else {
-		configured_display_type = display_type;
-		if (display_type == IMON_DISPLAY_TYPE_NONE)
-			ictx->display_supported = false;
-		else
-			ictx->display_supported = true;
-		dev_info(ictx->dev, "%s: overriding display type to %d via "
-			 "modparam\n", __func__, display_type);
-	}
-
-	ictx->display_type = configured_display_type;
-}
-
-static struct input_dev *imon_init_rdev(struct imon_context *ictx)
-{
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
-	int ret;
-	char *ir_codes = NULL;
-	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
-					    0x00, 0x00, 0x00, 0x88 };
-
-	rdev = input_allocate_device();
-	props = kzalloc(sizeof(*props), GFP_KERNEL);
-	if (!rdev || !props) {
-		dev_err(ictx->dev, "remote control dev allocation failed\n");
-		goto out;
-	}
-
-	snprintf(ictx->name_rdev, sizeof(ictx->name_rdev),
-		 "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
-	usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev,
-		      sizeof(ictx->phys_rdev));
-	strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
-
-	rdev->name = ictx->name_rdev;
-	rdev->phys = ictx->phys_rdev;
-	usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
-	rdev->dev.parent = ictx->dev;
-	rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_drvdata(rdev, ictx);
-
-	props->priv = ictx;
-	props->driver_type = RC_DRIVER_SCANCODE;
-	props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
-	props->change_protocol = imon_ir_change_protocol;
-	ictx->props = props;
-
-	/* Enable front-panel buttons and/or knobs */
-	memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
-	ret = send_packet(ictx);
-	/* Not fatal, but warn about it */
-	if (ret)
-		dev_info(ictx->dev, "panel buttons/knobs setup failed\n");
-
-	if (ictx->product == 0xffdc)
-		imon_get_ffdc_type(ictx);
-
-	imon_set_display_type(ictx);
-
-	if (ictx->ir_type == IR_TYPE_RC6)
-		ir_codes = RC_MAP_IMON_MCE;
-	else
-		ir_codes = RC_MAP_IMON_PAD;
-
-	ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
-	if (ret < 0) {
-		dev_err(ictx->dev, "remote input dev register failed\n");
-		goto out;
-	}
-
-	return rdev;
-
-out:
-	kfree(props);
-	input_free_device(rdev);
-	return NULL;
-}
-
-static struct input_dev *imon_init_idev(struct imon_context *ictx)
-{
-	struct input_dev *idev;
-	int ret, i;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(ictx->dev, "input dev allocation failed\n");
-		goto out;
-	}
-
-	snprintf(ictx->name_idev, sizeof(ictx->name_idev),
-		 "iMON Panel, Knob and Mouse(%04x:%04x)",
-		 ictx->vendor, ictx->product);
-	idev->name = ictx->name_idev;
-
-	usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
-		      sizeof(ictx->phys_idev));
-	strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev));
-	idev->phys = ictx->phys_idev;
-
-	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
-
-	idev->keybit[BIT_WORD(BTN_MOUSE)] =
-		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
-	idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
-		BIT_MASK(REL_WHEEL);
-
-	/* panel and/or knob code support */
-	for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
-		u32 kc = imon_panel_key_table[i].keycode;
-		__set_bit(kc, idev->keybit);
-	}
-
-	usb_to_input_id(ictx->usbdev_intf0, &idev->id);
-	idev->dev.parent = ictx->dev;
-	input_set_drvdata(idev, ictx);
-
-	ret = input_register_device(idev);
-	if (ret < 0) {
-		dev_err(ictx->dev, "input dev register failed\n");
-		goto out;
-	}
-
-	return idev;
-
-out:
-	input_free_device(idev);
-	return NULL;
-}
-
-static struct input_dev *imon_init_touch(struct imon_context *ictx)
-{
-	struct input_dev *touch;
-	int ret;
-
-	touch = input_allocate_device();
-	if (!touch) {
-		dev_err(ictx->dev, "touchscreen input dev allocation failed\n");
-		goto touch_alloc_failed;
-	}
-
-	snprintf(ictx->name_touch, sizeof(ictx->name_touch),
-		 "iMON USB Touchscreen (%04x:%04x)",
-		 ictx->vendor, ictx->product);
-	touch->name = ictx->name_touch;
-
-	usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
-		      sizeof(ictx->phys_touch));
-	strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch));
-	touch->phys = ictx->phys_touch;
-
-	touch->evbit[0] =
-		BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	touch->keybit[BIT_WORD(BTN_TOUCH)] =
-		BIT_MASK(BTN_TOUCH);
-	input_set_abs_params(touch, ABS_X,
-			     0x00, 0xfff, 0, 0);
-	input_set_abs_params(touch, ABS_Y,
-			     0x00, 0xfff, 0, 0);
-
-	input_set_drvdata(touch, ictx);
-
-	usb_to_input_id(ictx->usbdev_intf1, &touch->id);
-	touch->dev.parent = ictx->dev;
-	ret = input_register_device(touch);
-	if (ret <  0) {
-		dev_info(ictx->dev, "touchscreen input dev register failed\n");
-		goto touch_register_failed;
-	}
-
-	return touch;
-
-touch_register_failed:
-	input_free_device(ictx->touch);
-
-touch_alloc_failed:
-	return NULL;
-}
-
-static bool imon_find_endpoints(struct imon_context *ictx,
-				struct usb_host_interface *iface_desc)
-{
-	struct usb_endpoint_descriptor *ep;
-	struct usb_endpoint_descriptor *rx_endpoint = NULL;
-	struct usb_endpoint_descriptor *tx_endpoint = NULL;
-	int ifnum = iface_desc->desc.bInterfaceNumber;
-	int num_endpts = iface_desc->desc.bNumEndpoints;
-	int i, ep_dir, ep_type;
-	bool ir_ep_found = false;
-	bool display_ep_found = false;
-	bool tx_control = false;
-
-	/*
-	 * Scan the endpoint list and set:
-	 *	first input endpoint = IR endpoint
-	 *	first output endpoint = display endpoint
-	 */
-	for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
-		ep = &iface_desc->endpoint[i].desc;
-		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
-		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
-		if (!ir_ep_found && ep_dir == USB_DIR_IN &&
-		    ep_type == USB_ENDPOINT_XFER_INT) {
-
-			rx_endpoint = ep;
-			ir_ep_found = true;
-			dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
-
-		} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
-			   ep_type == USB_ENDPOINT_XFER_INT) {
-			tx_endpoint = ep;
-			display_ep_found = true;
-			dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
-		}
-	}
-
-	if (ifnum == 0) {
-		ictx->rx_endpoint_intf0 = rx_endpoint;
-		/*
-		 * tx is used to send characters to lcd/vfd, associate RF
-		 * remotes, set IR protocol, and maybe more...
-		 */
-		ictx->tx_endpoint = tx_endpoint;
-	} else {
-		ictx->rx_endpoint_intf1 = rx_endpoint;
-	}
-
-	/*
-	 * If we didn't find a display endpoint, this is probably one of the
-	 * newer iMON devices that use control urb instead of interrupt
-	 */
-	if (!display_ep_found) {
-		tx_control = true;
-		display_ep_found = true;
-		dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
-			"interface OUT endpoint\n", __func__);
-	}
-
-	/*
-	 * Some iMON receivers have no display. Unfortunately, it seems
-	 * that SoundGraph recycles device IDs between devices both with
-	 * and without... :\
-	 */
-	if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
-		display_ep_found = false;
-		dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
-	}
-
-	/*
-	 * iMON Touch devices have a VGA touchscreen, but no "display", as
-	 * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
-	 */
-	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
-		display_ep_found = false;
-		dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
-	}
-
-	/* Input endpoint is mandatory */
-	if (!ir_ep_found)
-		pr_err("no valid input (IR) endpoint found\n");
-
-	ictx->tx_control = tx_control;
-
-	if (display_ep_found)
-		ictx->display_supported = true;
-
-	return ir_ep_found;
-
-}
-
-static struct imon_context *imon_init_intf0(struct usb_interface *intf)
-{
-	struct imon_context *ictx;
-	struct urb *rx_urb;
-	struct urb *tx_urb;
-	struct device *dev = &intf->dev;
-	struct usb_host_interface *iface_desc;
-	int ret = -ENOMEM;
-
-	ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
-	if (!ictx) {
-		dev_err(dev, "%s: kzalloc failed for context", __func__);
-		goto exit;
-	}
-	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!rx_urb) {
-		dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
-		goto rx_urb_alloc_failed;
-	}
-	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!tx_urb) {
-		dev_err(dev, "%s: usb_alloc_urb failed for display urb",
-			__func__);
-		goto tx_urb_alloc_failed;
-	}
-
-	mutex_init(&ictx->lock);
-	spin_lock_init(&ictx->kc_lock);
-
-	mutex_lock(&ictx->lock);
-
-	ictx->dev = dev;
-	ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf0 = true;
-	ictx->rx_urb_intf0 = rx_urb;
-	ictx->tx_urb = tx_urb;
-	ictx->rf_device = false;
-
-	ictx->vendor  = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
-	ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
-
-	ret = -ENODEV;
-	iface_desc = intf->cur_altsetting;
-	if (!imon_find_endpoints(ictx, iface_desc)) {
-		goto find_endpoint_failed;
-	}
-
-	ictx->idev = imon_init_idev(ictx);
-	if (!ictx->idev) {
-		dev_err(dev, "%s: input device setup failed\n", __func__);
-		goto idev_setup_failed;
-	}
-
-	ictx->rdev = imon_init_rdev(ictx);
-	if (!ictx->rdev) {
-		dev_err(dev, "%s: rc device setup failed\n", __func__);
-		goto rdev_setup_failed;
-	}
-
-	usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
-		usb_rcvintpipe(ictx->usbdev_intf0,
-			ictx->rx_endpoint_intf0->bEndpointAddress),
-		ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
-		usb_rx_callback_intf0, ictx,
-		ictx->rx_endpoint_intf0->bInterval);
-
-	ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
-	if (ret) {
-		pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);
-		goto urb_submit_failed;
-	}
-
-	return ictx;
-
-urb_submit_failed:
-	ir_input_unregister(ictx->rdev);
-rdev_setup_failed:
-	input_unregister_device(ictx->idev);
-idev_setup_failed:
-find_endpoint_failed:
-	mutex_unlock(&ictx->lock);
-	usb_free_urb(tx_urb);
-tx_urb_alloc_failed:
-	usb_free_urb(rx_urb);
-rx_urb_alloc_failed:
-	kfree(ictx);
-exit:
-	dev_err(dev, "unable to initialize intf0, err %d\n", ret);
-
-	return NULL;
-}
-
-static struct imon_context *imon_init_intf1(struct usb_interface *intf,
-					    struct imon_context *ictx)
-{
-	struct urb *rx_urb;
-	struct usb_host_interface *iface_desc;
-	int ret = -ENOMEM;
-
-	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!rx_urb) {
-		pr_err("usb_alloc_urb failed for IR urb\n");
-		goto rx_urb_alloc_failed;
-	}
-
-	mutex_lock(&ictx->lock);
-
-	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
-		init_timer(&ictx->ttimer);
-		ictx->ttimer.data = (unsigned long)ictx;
-		ictx->ttimer.function = imon_touch_display_timeout;
-	}
-
-	ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf1 = true;
-	ictx->rx_urb_intf1 = rx_urb;
-
-	ret = -ENODEV;
-	iface_desc = intf->cur_altsetting;
-	if (!imon_find_endpoints(ictx, iface_desc))
-		goto find_endpoint_failed;
-
-	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
-		ictx->touch = imon_init_touch(ictx);
-		if (!ictx->touch)
-			goto touch_setup_failed;
-	} else
-		ictx->touch = NULL;
-
-	usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
-		usb_rcvintpipe(ictx->usbdev_intf1,
-			ictx->rx_endpoint_intf1->bEndpointAddress),
-		ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
-		usb_rx_callback_intf1, ictx,
-		ictx->rx_endpoint_intf1->bInterval);
-
-	ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
-
-	if (ret) {
-		pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);
-		goto urb_submit_failed;
-	}
-
-	return ictx;
-
-urb_submit_failed:
-	if (ictx->touch)
-		input_unregister_device(ictx->touch);
-touch_setup_failed:
-find_endpoint_failed:
-	mutex_unlock(&ictx->lock);
-	usb_free_urb(rx_urb);
-rx_urb_alloc_failed:
-	dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
-
-	return NULL;
-}
-
-static void imon_init_display(struct imon_context *ictx,
-			      struct usb_interface *intf)
-{
-	int ret;
-
-	dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
-
-	/* set up sysfs entry for built-in clock */
-	ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
-	if (ret)
-		dev_err(ictx->dev, "Could not create display sysfs "
-			"entries(%d)", ret);
-
-	if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
-		ret = usb_register_dev(intf, &imon_lcd_class);
-	else
-		ret = usb_register_dev(intf, &imon_vfd_class);
-	if (ret)
-		/* Not a fatal error, so ignore */
-		dev_info(ictx->dev, "could not get a minor number for "
-			 "display\n");
-
-}
-
-/**
- * Callback function for USB core API: Probe
- */
-static int __devinit imon_probe(struct usb_interface *interface,
-				const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = NULL;
-	struct usb_host_interface *iface_desc = NULL;
-	struct usb_interface *first_if;
-	struct device *dev = &interface->dev;
-	int ifnum, code_length, sysfs_err;
-	int ret = 0;
-	struct imon_context *ictx = NULL;
-	struct imon_context *first_if_ctx = NULL;
-	u16 vendor, product;
-
-	code_length = BUF_CHUNK_SIZE * 8;
-
-	usbdev     = usb_get_dev(interface_to_usbdev(interface));
-	iface_desc = interface->cur_altsetting;
-	ifnum      = iface_desc->desc.bInterfaceNumber;
-	vendor     = le16_to_cpu(usbdev->descriptor.idVendor);
-	product    = le16_to_cpu(usbdev->descriptor.idProduct);
-
-	dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
-		__func__, vendor, product, ifnum);
-
-	/* prevent races probing devices w/multiple interfaces */
-	mutex_lock(&driver_lock);
-
-	first_if = usb_ifnum_to_if(usbdev, 0);
-	first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
-
-	if (ifnum == 0) {
-		ictx = imon_init_intf0(interface);
-		if (!ictx) {
-			pr_err("failed to initialize context!\n");
-			ret = -ENODEV;
-			goto fail;
-		}
-
-	} else {
-	/* this is the secondary interface on the device */
-		ictx = imon_init_intf1(interface, first_if_ctx);
-		if (!ictx) {
-			pr_err("failed to attach to context!\n");
-			ret = -ENODEV;
-			goto fail;
-		}
-
-	}
-
-	usb_set_intfdata(interface, ictx);
-
-	if (ifnum == 0) {
-		if (product == 0xffdc && ictx->rf_device) {
-			sysfs_err = sysfs_create_group(&interface->dev.kobj,
-						       &imon_rf_attr_group);
-			if (sysfs_err)
-				pr_err("Could not create RF sysfs entries(%d)\n",
-				       sysfs_err);
-		}
-
-		if (ictx->display_supported)
-			imon_init_display(ictx, interface);
-	}
-
-	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
-		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
-		 usbdev->bus->busnum, usbdev->devnum);
-
-	mutex_unlock(&ictx->lock);
-	mutex_unlock(&driver_lock);
-
-	return 0;
-
-fail:
-	mutex_unlock(&driver_lock);
-	dev_err(dev, "unable to register, err %d\n", ret);
-
-	return ret;
-}
-
-/**
- * Callback function for USB core API: disconnect
- */
-static void __devexit imon_disconnect(struct usb_interface *interface)
-{
-	struct imon_context *ictx;
-	struct device *dev;
-	int ifnum;
-
-	/* prevent races with multi-interface device probing and display_open */
-	mutex_lock(&driver_lock);
-
-	ictx = usb_get_intfdata(interface);
-	dev = ictx->dev;
-	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
-
-	mutex_lock(&ictx->lock);
-
-	/*
-	 * sysfs_remove_group is safe to call even if sysfs_create_group
-	 * hasn't been called
-	 */
-	sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group);
-	sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group);
-
-	usb_set_intfdata(interface, NULL);
-
-	/* Abort ongoing write */
-	if (ictx->tx.busy) {
-		usb_kill_urb(ictx->tx_urb);
-		complete_all(&ictx->tx.finished);
-	}
-
-	if (ifnum == 0) {
-		ictx->dev_present_intf0 = false;
-		usb_kill_urb(ictx->rx_urb_intf0);
-		input_unregister_device(ictx->idev);
-		ir_input_unregister(ictx->rdev);
-		if (ictx->display_supported) {
-			if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
-				usb_deregister_dev(interface, &imon_lcd_class);
-			else
-				usb_deregister_dev(interface, &imon_vfd_class);
-		}
-	} else {
-		ictx->dev_present_intf1 = false;
-		usb_kill_urb(ictx->rx_urb_intf1);
-		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
-			input_unregister_device(ictx->touch);
-	}
-
-	if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) {
-		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
-			del_timer_sync(&ictx->ttimer);
-		mutex_unlock(&ictx->lock);
-		if (!ictx->display_isopen)
-			free_imon_context(ictx);
-	} else
-		mutex_unlock(&ictx->lock);
-
-	mutex_unlock(&driver_lock);
-
-	dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
-		__func__, ifnum);
-}
-
-static int imon_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct imon_context *ictx = usb_get_intfdata(intf);
-	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
-	if (ifnum == 0)
-		usb_kill_urb(ictx->rx_urb_intf0);
-	else
-		usb_kill_urb(ictx->rx_urb_intf1);
-
-	return 0;
-}
-
-static int imon_resume(struct usb_interface *intf)
-{
-	int rc = 0;
-	struct imon_context *ictx = usb_get_intfdata(intf);
-	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
-	if (ifnum == 0) {
-		usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
-			usb_rcvintpipe(ictx->usbdev_intf0,
-				ictx->rx_endpoint_intf0->bEndpointAddress),
-			ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
-			usb_rx_callback_intf0, ictx,
-			ictx->rx_endpoint_intf0->bInterval);
-
-		rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
-
-	} else {
-		usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
-			usb_rcvintpipe(ictx->usbdev_intf1,
-				ictx->rx_endpoint_intf1->bEndpointAddress),
-			ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
-			usb_rx_callback_intf1, ictx,
-			ictx->rx_endpoint_intf1->bInterval);
-
-		rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
-	}
-
-	return rc;
-}
-
-static int __init imon_init(void)
-{
-	int rc;
-
-	rc = usb_register(&imon_driver);
-	if (rc) {
-		pr_err("usb register failed(%d)\n", rc);
-		rc = -ENODEV;
-	}
-
-	return rc;
-}
-
-static void __exit imon_exit(void)
-{
-	usb_deregister(&imon_driver);
-}
-
-module_init(imon_init);
-module_exit(imon_exit);
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
deleted file mode 100644
index 81c936bd793f..000000000000
--- a/drivers/media/IR/ir-core-priv.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Remote Controller core raw events header
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IR_RAW_EVENT
-#define _IR_RAW_EVENT
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <media/ir-core.h>
-
-struct ir_raw_handler {
-	struct list_head list;
-
-	u64 protocols; /* which are handled by this handler */
-	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
-
-	/* These two should only be used by the lirc decoder */
-	int (*raw_register)(struct input_dev *input_dev);
-	int (*raw_unregister)(struct input_dev *input_dev);
-};
-
-struct ir_raw_event_ctrl {
-	struct list_head		list;		/* to keep track of raw clients */
-	struct task_struct		*thread;
-	spinlock_t			lock;
-	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
-	ktime_t				last_event;	/* when last event occurred */
-	enum raw_event_type		last_type;	/* last event type */
-	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
-	u64				enabled_protocols; /* enabled raw protocol decoders */
-
-	/* raw decoder state follows */
-	struct ir_raw_event prev_ev;
-	struct ir_raw_event this_ev;
-	struct nec_dec {
-		int state;
-		unsigned count;
-		u32 bits;
-		bool is_nec_x;
-		bool necx_repeat;
-	} nec;
-	struct rc5_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc5;
-	struct rc6_dec {
-		int state;
-		u8 header;
-		u32 body;
-		bool toggle;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc6;
-	struct sony_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-	} sony;
-	struct jvc_dec {
-		int state;
-		u16 bits;
-		u16 old_bits;
-		unsigned count;
-		bool first;
-		bool toggle;
-	} jvc;
-	struct rc5_sz_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc5_sz;
-	struct lirc_codec {
-		struct ir_input_dev *ir_dev;
-		struct lirc_driver *drv;
-		int carrier_low;
-
-		ktime_t gap_start;
-		u64 gap_duration;
-		bool gap;
-		bool send_timeout_reports;
-
-	} lirc;
-};
-
-/* macros for IR decoders */
-static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
-	return d1 > (d2 - margin);
-}
-
-static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
-	return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
-}
-
-static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
-{
-	return x->pulse != y->pulse;
-}
-
-static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
-{
-	if (duration > ev->duration)
-		ev->duration = 0;
-	else
-		ev->duration -= duration;
-}
-
-/* Returns true if event is normal pulse/space event */
-static inline bool is_timing_event(struct ir_raw_event ev)
-{
-	return !ev.carrier_report && !ev.reset;
-}
-
-#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
-#define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
-
-/*
- * Routines from ir-raw-event.c to be used internally and by decoders
- */
-u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_init(void);
-
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
-/*
- * Decoder initialization code
- *
- * Those load logic are called during ir-core init, and automatically
- * loads the compiled decoders for their usage with IR raw events
- */
-
-/* from ir-nec-decoder.c */
-#ifdef CONFIG_IR_NEC_DECODER_MODULE
-#define load_nec_decode()	request_module("ir-nec-decoder")
-#else
-#define load_nec_decode()	0
-#endif
-
-/* from ir-rc5-decoder.c */
-#ifdef CONFIG_IR_RC5_DECODER_MODULE
-#define load_rc5_decode()	request_module("ir-rc5-decoder")
-#else
-#define load_rc5_decode()	0
-#endif
-
-/* from ir-rc6-decoder.c */
-#ifdef CONFIG_IR_RC6_DECODER_MODULE
-#define load_rc6_decode()	request_module("ir-rc6-decoder")
-#else
-#define load_rc6_decode()	0
-#endif
-
-/* from ir-jvc-decoder.c */
-#ifdef CONFIG_IR_JVC_DECODER_MODULE
-#define load_jvc_decode()	request_module("ir-jvc-decoder")
-#else
-#define load_jvc_decode()	0
-#endif
-
-/* from ir-sony-decoder.c */
-#ifdef CONFIG_IR_SONY_DECODER_MODULE
-#define load_sony_decode()	request_module("ir-sony-decoder")
-#else
-#define load_sony_decode()	0
-#endif
-
-/* from ir-lirc-codec.c */
-#ifdef CONFIG_IR_LIRC_CODEC_MODULE
-#define load_lirc_codec()	request_module("ir-lirc-codec")
-#else
-#define load_lirc_codec()	0
-#endif
-
-
-#endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
deleted file mode 100644
index ec021c92527a..000000000000
--- a/drivers/media/IR/ir-functions.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * some common functions to handle infrared remote protocol decoding for
- * drivers which have not yet been (or can't be) converted to use the
- * regular protocol decoders...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-#include <media/ir-common.h>
-#include "ir-core-priv.h"
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-/* RC5 decoding stuff, moved from bttv-input.c to share it with
- * saa7134 */
-
-/* decode raw bit pattern to RC5 code */
-static u32 ir_rc5_decode(unsigned int code)
-{
-	unsigned int org_code = code;
-	unsigned int pair;
-	unsigned int rc5 = 0;
-	int i;
-
-	for (i = 0; i < 14; ++i) {
-		pair = code & 0x3;
-		code >>= 2;
-
-		rc5 <<= 1;
-		switch (pair) {
-		case 0:
-		case 2:
-			break;
-		case 1:
-			rc5 |= 1;
-			break;
-		case 3:
-			IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
-			return 0;
-		}
-	}
-	IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
-		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-	return rc5;
-}
-
-void ir_rc5_timer_end(unsigned long data)
-{
-	struct card_ir *ir = (struct card_ir *)data;
-	struct timeval tv;
-	unsigned long current_jiffies;
-	u32 gap;
-	u32 rc5 = 0;
-
-	/* get time */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* signal we're ready to start a new code */
-	ir->active = 0;
-
-	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
-	if (gap < 28000) {
-		IR_dprintk(1, "ir-common: spurious timer_end\n");
-		return;
-	}
-
-	if (ir->last_bit < 20) {
-		/* ignore spurious codes (caused by light/other remotes) */
-		IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
-	} else {
-		ir->code = (ir->code << ir->shift_by) | 1;
-		rc5 = ir_rc5_decode(ir->code);
-
-		/* two start bits? */
-		if (RC5_START(rc5) != ir->start) {
-			IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
-
-			/* right address? */
-		} else if (RC5_ADDR(rc5) == ir->addr) {
-			u32 toggle = RC5_TOGGLE(rc5);
-			u32 instr = RC5_INSTR(rc5);
-
-			/* Good code */
-			ir_keydown(ir->dev, instr, toggle);
-			IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
-				   instr, toggle);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
deleted file mode 100644
index 63dca6e5458b..000000000000
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define JVC_NBITS		16		/* dev(8) + func(8) */
-#define JVC_UNIT		525000		/* ns */
-#define JVC_HEADER_PULSE	(16 * JVC_UNIT) /* lack of header -> repeat */
-#define JVC_HEADER_SPACE	(8  * JVC_UNIT)
-#define JVC_BIT_PULSE		(1  * JVC_UNIT)
-#define JVC_BIT_0_SPACE		(1  * JVC_UNIT)
-#define JVC_BIT_1_SPACE		(3  * JVC_UNIT)
-#define JVC_TRAILER_PULSE	(1  * JVC_UNIT)
-#define	JVC_TRAILER_SPACE	(35 * JVC_UNIT)
-
-enum jvc_state {
-	STATE_INACTIVE,
-	STATE_HEADER_SPACE,
-	STATE_BIT_PULSE,
-	STATE_BIT_SPACE,
-	STATE_TRAILER_PULSE,
-	STATE_TRAILER_SPACE,
-	STATE_CHECK_REPEAT,
-};
-
-/**
- * ir_jvc_decode() - Decode one JVC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @duration:   the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct jvc_dec *data = &ir_dev->raw->jvc;
-
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
-		return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2))
-		goto out;
-
-	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-again:
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
-			break;
-
-		data->count = 0;
-		data->first = true;
-		data->toggle = !data->toggle;
-		data->state = STATE_HEADER_SPACE;
-		return 0;
-
-	case STATE_HEADER_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2))
-			break;
-
-		data->state = STATE_BIT_PULSE;
-		return 0;
-
-	case STATE_BIT_PULSE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2))
-			break;
-
-		data->state = STATE_BIT_SPACE;
-		return 0;
-
-	case STATE_BIT_SPACE:
-		if (ev.pulse)
-			break;
-
-		data->bits <<= 1;
-		if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
-			data->bits |= 1;
-			decrease_duration(&ev, JVC_BIT_1_SPACE);
-		} else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
-			decrease_duration(&ev, JVC_BIT_0_SPACE);
-		else
-			break;
-		data->count++;
-
-		if (data->count == JVC_NBITS)
-			data->state = STATE_TRAILER_PULSE;
-		else
-			data->state = STATE_BIT_PULSE;
-		return 0;
-
-	case STATE_TRAILER_PULSE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2))
-			break;
-
-		data->state = STATE_TRAILER_SPACE;
-		return 0;
-
-	case STATE_TRAILER_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2))
-			break;
-
-		if (data->first) {
-			u32 scancode;
-			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
-				   (bitrev8((data->bits >> 0) & 0xff) << 0);
-			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
-			ir_keydown(input_dev, scancode, data->toggle);
-			data->first = false;
-			data->old_bits = data->bits;
-		} else if (data->bits == data->old_bits) {
-			IR_dprintk(1, "JVC repeat\n");
-			ir_repeat(input_dev);
-		} else {
-			IR_dprintk(1, "JVC invalid repeat msg\n");
-			break;
-		}
-
-		data->count = 0;
-		data->state = STATE_CHECK_REPEAT;
-		return 0;
-
-	case STATE_CHECK_REPEAT:
-		if (!ev.pulse)
-			break;
-
-		if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
-			data->state = STATE_INACTIVE;
-  else
-			data->state = STATE_BIT_PULSE;
-		goto again;
-	}
-
-out:
-	IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler jvc_handler = {
-	.protocols	= IR_TYPE_JVC,
-	.decode		= ir_jvc_decode,
-};
-
-static int __init ir_jvc_decode_init(void)
-{
-	ir_raw_handler_register(&jvc_handler);
-
-	printk(KERN_INFO "IR JVC protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_jvc_decode_exit(void)
-{
-	ir_raw_handler_unregister(&jvc_handler);
-}
-
-module_init(ir_jvc_decode_init);
-module_exit(ir_jvc_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("JVC IR protocol decoder");
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
deleted file mode 100644
index 8039110350d3..000000000000
--- a/drivers/media/IR/ir-keytable.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/* ir-keytable.c - handle IR scancode->keycode tables
- *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include "ir-core-priv.h"
-
-/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
-#define IR_TAB_MIN_SIZE	256
-#define IR_TAB_MAX_SIZE	8192
-
-/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
-#define IR_KEYPRESS_TIMEOUT 250
-
-/**
- * ir_create_table() - initializes a scancode table
- * @rc_tab:	the ir_scancode_table to initialize
- * @name:	name to assign to the table
- * @ir_type:	ir type to assign to the new table
- * @size:	initial size of the table
- * @return:	zero on success or a negative error code
- *
- * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
- */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
-			   const char *name, u64 ir_type, size_t size)
-{
-	rc_tab->name = name;
-	rc_tab->ir_type = ir_type;
-	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
-	if (!rc_tab->scan)
-		return -ENOMEM;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-	return 0;
-}
-
-/**
- * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab:	the table whose mappings need to be freed
- *
- * This routine will free memory alloctaed for key mappings used by given
- * scancode table.
- */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
-{
-	rc_tab->size = 0;
-	kfree(rc_tab->scan);
-	rc_tab->scan = NULL;
-}
-
-/**
- * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab:	the ir_scancode_table to resize
- * @gfp_flags:	gfp flags to use when allocating memory
- * @return:	zero on success or a negative error code
- *
- * This routine will shrink the ir_scancode_table if it has lots of
- * unused entries and grow it if it is full.
- */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
-{
-	unsigned int oldalloc = rc_tab->alloc;
-	unsigned int newalloc = oldalloc;
-	struct ir_scancode *oldscan = rc_tab->scan;
-	struct ir_scancode *newscan;
-
-	if (rc_tab->size == rc_tab->len) {
-		/* All entries in use -> grow keytable */
-		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
-			return -ENOMEM;
-
-		newalloc *= 2;
-		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
-	}
-
-	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
-		/* Less than 1/3 of entries in use -> shrink keytable */
-		newalloc /= 2;
-		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
-	}
-
-	if (newalloc == oldalloc)
-		return 0;
-
-	newscan = kmalloc(newalloc, gfp_flags);
-	if (!newscan) {
-		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
-		return -ENOMEM;
-	}
-
-	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
-	rc_tab->scan = newscan;
-	rc_tab->alloc = newalloc;
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	kfree(oldscan);
-	return 0;
-}
-
-/**
- * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @rc_tab:	scancode table to be adjusted
- * @index:	index of the mapping that needs to be updated
- * @keycode:	the desired keycode
- * @return:	previous keycode assigned to the mapping
- *
- * This routine is used to update scancode->keycopde mapping at given
- * position.
- */
-static unsigned int ir_update_mapping(struct input_dev *dev,
-				      struct ir_scancode_table *rc_tab,
-				      unsigned int index,
-				      unsigned int new_keycode)
-{
-	int old_keycode = rc_tab->scan[index].keycode;
-	int i;
-
-	/* Did the user wish to remove the mapping? */
-	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
-		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
-			   index, rc_tab->scan[index].scancode);
-		rc_tab->len--;
-		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
-			(rc_tab->len - index) * sizeof(struct ir_scancode));
-	} else {
-		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
-			   index,
-			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
-			   rc_tab->scan[index].scancode, new_keycode);
-		rc_tab->scan[index].keycode = new_keycode;
-		__set_bit(new_keycode, dev->keybit);
-	}
-
-	if (old_keycode != KEY_RESERVED) {
-		/* A previous mapping was updated... */
-		__clear_bit(old_keycode, dev->keybit);
-		/* ... but another scancode might use the same keycode */
-		for (i = 0; i < rc_tab->len; i++) {
-			if (rc_tab->scan[i].keycode == old_keycode) {
-				__set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-
-		/* Possibly shrink the keytable, failure is not a problem */
-		ir_resize_table(rc_tab, GFP_ATOMIC);
-	}
-
-	return old_keycode;
-}
-
-/**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev:	the struct ir_input_dev device descriptor
- * @rc_tab:	scancode table to be searched
- * @scancode:	the desired scancode
- * @resize:	controls whether we allowed to resize the table to
- *		accomodate not yet present scancodes
- * @return:	index of the mapping containing scancode in question
- *		or -1U in case of failure.
- *
- * This routine is used to locate given scancode in ir_scancode_table.
- * If scancode is not yet present the routine will allocate a new slot
- * for it.
- */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
-					  struct ir_scancode_table *rc_tab,
-					  unsigned int scancode,
-					  bool resize)
-{
-	unsigned int i;
-
-	/*
-	 * Unfortunately, some hardware-based IR decoders don't provide
-	 * all bits for the complete IR code. In general, they provide only
-	 * the command part of the IR code. Yet, as it is possible to replace
-	 * the provided IR with another one, it is needed to allow loading
-	 * IR tables from other remotes. So,
-	 */
-	if (ir_dev->props && ir_dev->props->scanmask)
-		scancode &= ir_dev->props->scanmask;
-
-	/* First check if we already have a mapping for this ir command */
-	for (i = 0; i < rc_tab->len; i++) {
-		if (rc_tab->scan[i].scancode == scancode)
-			return i;
-
-		/* Keytable is sorted from lowest to highest scancode */
-		if (rc_tab->scan[i].scancode >= scancode)
-			break;
-	}
-
-	/* No previous mapping found, we might need to grow the table */
-	if (rc_tab->size == rc_tab->len) {
-		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
-			return -1U;
-	}
-
-	/* i is the proper index to insert our new keycode */
-	if (i < rc_tab->len)
-		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
-			(rc_tab->len - i) * sizeof(struct ir_scancode));
-	rc_tab->scan[i].scancode = scancode;
-	rc_tab->scan[i].keycode = KEY_RESERVED;
-	rc_tab->len++;
-
-	return i;
-}
-
-/**
- * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	result
- * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
- *
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- */
-static int ir_setkeycode(struct input_dev *dev,
-			 const struct input_keymap_entry *ke,
-			 unsigned int *old_keycode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-		if (index >= rc_tab->len) {
-			retval = -EINVAL;
-			goto out;
-		}
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
-		if (index >= rc_tab->len) {
-			retval = -ENOMEM;
-			goto out;
-		}
-	}
-
-	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @to:		the struct ir_scancode_table to copy entries to
- * @from:	the struct ir_scancode_table to copy entries from
- * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
- *
- * This routine is used to handle table initialization.
- */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
-			  const struct ir_scancode_table *from)
-{
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int i, index;
-	int rc;
-
-	rc = ir_create_table(&ir_dev->rc_tab,
-			     from->name, from->ir_type, from->size);
-	if (rc)
-		return rc;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-
-	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(ir_dev, rc_tab,
-					      from->scan[i].scancode, false);
-		if (index >= rc_tab->len) {
-			rc = -ENOMEM;
-			break;
-		}
-
-		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
-				  from->scan[i].keycode);
-	}
-
-	if (rc)
-		ir_free_table(rc_tab);
-
-	return rc;
-}
-
-/**
- * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab:	the &struct ir_scancode_table to search
- * @scancode:	scancode to look for in the table
- * @return:	index in the table, -1U if not found
- *
- * This routine performs binary search in RC keykeymap table for
- * given scancode.
- */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
-					  unsigned int scancode)
-{
-	int start = 0;
-	int end = rc_tab->len - 1;
-	int mid;
-
-	while (start <= end) {
-		mid = (start + end) / 2;
-		if (rc_tab->scan[mid].scancode < scancode)
-			start = mid + 1;
-		else if (rc_tab->scan[mid].scancode > scancode)
-			end = mid - 1;
-		else
-			return mid;
-	}
-
-	return -1U;
-}
-
-/**
- * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	used to return the keycode, if found, or KEY_RESERVED
- * @return:	always returns zero.
- *
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- */
-static int ir_getkeycode(struct input_dev *dev,
-			 struct input_keymap_entry *ke)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	struct ir_scancode *entry;
-	unsigned long flags;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_lookup_by_scancode(rc_tab, scancode);
-	}
-
-	if (index >= rc_tab->len) {
-		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
-			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
-				   scancode);
-		retval = -EINVAL;
-		goto out;
-	}
-
-	entry = &rc_tab->scan[index];
-
-	ke->index = index;
-	ke->keycode = entry->keycode;
-	ke->len = sizeof(entry->scancode);
-	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
-	retval = 0;
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev:	the struct input_dev descriptor of the device
- * @scancode:	the scancode that we're seeking
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
- */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int keycode;
-	unsigned int index;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	index = ir_lookup_by_scancode(rc_tab, scancode);
-	keycode = index < rc_tab->len ?
-			rc_tab->scan[index].keycode : KEY_RESERVED;
-
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-
-	if (keycode != KEY_RESERVED)
-		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
-			   dev->name, scancode, keycode);
-
-	return keycode;
-}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
-
-/**
- * ir_do_keyup() - internal function to signal the release of a keypress
- * @ir:         the struct ir_input_dev descriptor of the device
- *
- * This function is used internally to release a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keyup(struct ir_input_dev *ir)
-{
-	if (!ir->keypressed)
-		return;
-
-	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
-	input_report_key(ir->input_dev, ir->last_keycode, 0);
-	input_sync(ir->input_dev);
-	ir->keypressed = false;
-}
-
-/**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev:        the struct input_dev descriptor of the device
- *
- * This routine is used to signal that a key has been released on the
- * remote control.
- */
-void ir_keyup(struct input_dev *dev)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keyup);
-
-/**
- * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
- *
- * This routine will generate a keyup event some time after a keydown event
- * is generated when no further activity has been detected.
- */
-static void ir_timer_keyup(unsigned long cookie)
-{
-	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
-	unsigned long flags;
-
-	/*
-	 * ir->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
-		ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-
-/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev:        the struct input_dev descriptor of the device
- *
- * This routine is used by IR decoders when a repeat message which does
- * not include the necessary bits to reproduce the scancode has been
- * received.
- */
-void ir_repeat(struct input_dev *dev)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-
-	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
-
-	if (!ir->keypressed)
-		goto out;
-
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-
-out:
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_repeat);
-
-/**
- * ir_do_keydown() - internal function to process a keypress
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode of the keypress
- * @keycode:    the keycode of the keypress
- * @toggle:     the toggle value of the keypress
- *
- * This function is used internally to register a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keydown(struct input_dev *dev, int scancode,
-			  u32 keycode, u8 toggle)
-{
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	input_event(dev, EV_MSC, MSC_SCAN, scancode);
-
-	/* Repeat event? */
-	if (ir->keypressed &&
-	    ir->last_scancode == scancode &&
-	    ir->last_toggle == toggle)
-		return;
-
-	/* Release old keypress */
-	ir_do_keyup(ir);
-
-	ir->last_scancode = scancode;
-	ir->last_toggle = toggle;
-	ir->last_keycode = keycode;
-
-	if (keycode == KEY_RESERVED)
-		return;
-
-	/* Register a keypress */
-	ir->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->name, keycode, scancode);
-	input_report_key(dev, ir->last_keycode, 1);
-	input_sync(dev);
-}
-
-/**
- * ir_keydown() - generates input event for a key press
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
- */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
-
-	if (ir->keypressed) {
-		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-	}
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown);
-
-/**
- * ir_keydown_notimeout() - generates input event for a key press without
- *                          an automatic keyup event at a later time
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
- */
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
-
-static int ir_open(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- *			    for keymap table get/set
- * @input_dev:	the struct input_dev descriptor of the device
- * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
-		      const struct ir_scancode_table *rc_tab,
-		      struct ir_dev_props *props,
-		      const char *driver_name)
-{
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (rc_tab->scan == NULL || !rc_tab->size)
-		return -EINVAL;
-
-	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
-	if (!ir_dev)
-		return -ENOMEM;
-
-	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
-	if (!ir_dev->driver_name) {
-		rc = -ENOMEM;
-		goto out_dev;
-	}
-
-	input_dev->getkeycode_new = ir_getkeycode;
-	input_dev->setkeycode_new = ir_setkeycode;
-	input_set_drvdata(input_dev, ir_dev);
-	ir_dev->input_dev = input_dev;
-
-	spin_lock_init(&ir_dev->rc_tab.lock);
-	spin_lock_init(&ir_dev->keylock);
-	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
-	if (props) {
-		ir_dev->props = props;
-		if (props->open)
-			input_dev->open = ir_open;
-		if (props->close)
-			input_dev->close = ir_close;
-	}
-
-	set_bit(EV_KEY, input_dev->evbit);
-	set_bit(EV_REP, input_dev->evbit);
-	set_bit(EV_MSC, input_dev->evbit);
-	set_bit(MSC_SCAN, input_dev->mscbit);
-
-	rc = ir_setkeytable(ir_dev, rc_tab);
-	if (rc)
-		goto out_name;
-
-	rc = ir_register_class(input_dev);
-	if (rc < 0)
-		goto out_table;
-
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-			rc = ir_raw_event_register(input_dev);
-			if (rc < 0)
-				goto out_event;
-		}
-
-	rc = ir_register_input(input_dev);
-	if (rc < 0)
-		goto out_event;
-
-	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
-		   driver_name, rc_tab->name,
-		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
-			" in raw mode" : "");
-
-	/*
-	 * Default delay of 250ms is too short for some protocols, expecially
-	 * since the timeout is currently set to 250ms. Increase it to 500ms,
-	 * to avoid wrong repetition of the keycodes.
-	 */
-	input_dev->rep[REP_DELAY] = 500;
-
-	return 0;
-
-out_event:
-	ir_unregister_class(input_dev);
-out_table:
-	ir_free_table(&ir_dev->rc_tab);
-out_name:
-	kfree(ir_dev->driver_name);
-out_dev:
-	kfree(ir_dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev:	the struct input_dev descriptor of the device
-
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	if (!ir_dev)
-		return;
-
-	IR_dprintk(1, "Freed keycode table\n");
-
-	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-			ir_raw_event_unregister(input_dev);
-
-	ir_free_table(&ir_dev->rc_tab);
-
-	ir_unregister_class(input_dev);
-
-	kfree(ir_dev->driver_name);
-	kfree(ir_dev);
-}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
-
-int ir_core_debug;    /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c
deleted file mode 100644
index 9fc0db9d344d..000000000000
--- a/drivers/media/IR/ir-lirc-codec.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
- *
- * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-#include <media/ir-core.h>
-#include "ir-core-priv.h"
-
-#define LIRCBUF_SIZE 256
-
-/**
- * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
- *		      lircd userspace daemon for decoding.
- * @input_dev:	the struct input_dev descriptor of the device
- * @duration:	the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the lirc interfaces aren't wired up.
- */
-static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
-	int sample;
-
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
-		return 0;
-
-	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
-		return -EINVAL;
-
-	/* Packet start */
-	if (ev.reset)
-		return 0;
-
-	/* Carrier reports */
-	if (ev.carrier_report) {
-		sample = LIRC_FREQUENCY(ev.carrier);
-
-	/* Packet end */
-	} else if (ev.timeout) {
-
-		if (lirc->gap)
-			return 0;
-
-		lirc->gap_start = ktime_get();
-		lirc->gap = true;
-		lirc->gap_duration = ev.duration;
-
-		if (!lirc->send_timeout_reports)
-			return 0;
-
-		sample = LIRC_TIMEOUT(ev.duration / 1000);
-
-	/* Normal sample */
-	} else {
-
-		if (lirc->gap) {
-			int gap_sample;
-
-			lirc->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
-				lirc->gap_start));
-
-			/* Convert to ms and cap by LIRC_VALUE_MASK */
-			do_div(lirc->gap_duration, 1000);
-			lirc->gap_duration = min(lirc->gap_duration,
-							(u64)LIRC_VALUE_MASK);
-
-			gap_sample = LIRC_SPACE(lirc->gap_duration);
-			lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
-						(unsigned char *) &gap_sample);
-			lirc->gap = false;
-		}
-
-		sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
-					LIRC_SPACE(ev.duration / 1000);
-	}
-
-	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
-			  (unsigned char *) &sample);
-	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
-
-	return 0;
-}
-
-static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
-				   size_t n, loff_t *ppos)
-{
-	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
-	int *txbuf; /* buffer with values to transmit */
-	int ret = 0, count;
-
-	lirc = lirc_get_pdata(file);
-	if (!lirc)
-		return -EFAULT;
-
-	if (n % sizeof(int))
-		return -EINVAL;
-
-	count = n / sizeof(int);
-	if (count > LIRCBUF_SIZE || count % 2 == 0)
-		return -EINVAL;
-
-	txbuf = memdup_user(buf, n);
-	if (IS_ERR(txbuf))
-		return PTR_ERR(txbuf);
-
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	if (ir_dev->props && ir_dev->props->tx_ir)
-		ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
-
-out:
-	kfree(txbuf);
-	return ret;
-}
-
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
-			unsigned long __user arg)
-{
-	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
-	int ret = 0;
-	void *drv_data;
-	__u32 val = 0, tmp;
-
-	lirc = lirc_get_pdata(filep);
-	if (!lirc)
-		return -EFAULT;
-
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
-		return -EFAULT;
-
-	drv_data = ir_dev->props->priv;
-
-	if (_IOC_DIR(cmd) & _IOC_WRITE) {
-		ret = get_user(val, (__u32 *)arg);
-		if (ret)
-			return ret;
-	}
-
-	switch (cmd) {
-
-	/* legacy support */
-	case LIRC_GET_SEND_MODE:
-		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
-		break;
-
-	case LIRC_SET_SEND_MODE:
-		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
-			return -EINVAL;
-		return 0;
-
-	/* TX settings */
-	case LIRC_SET_TRANSMITTER_MASK:
-		if (!ir_dev->props->s_tx_mask)
-			return -EINVAL;
-
-		return ir_dev->props->s_tx_mask(drv_data, val);
-
-	case LIRC_SET_SEND_CARRIER:
-		if (!ir_dev->props->s_tx_carrier)
-			return -EINVAL;
-
-		return ir_dev->props->s_tx_carrier(drv_data, val);
-
-	case LIRC_SET_SEND_DUTY_CYCLE:
-		if (!ir_dev->props->s_tx_duty_cycle)
-			return -ENOSYS;
-
-		if (val <= 0 || val >= 100)
-			return -EINVAL;
-
-		return ir_dev->props->s_tx_duty_cycle(drv_data, val);
-
-	/* RX settings */
-	case LIRC_SET_REC_CARRIER:
-		if (!ir_dev->props->s_rx_carrier_range)
-			return -ENOSYS;
-
-		if (val <= 0)
-			return -EINVAL;
-
-		return ir_dev->props->s_rx_carrier_range(drv_data,
-			ir_dev->raw->lirc.carrier_low, val);
-
-	case LIRC_SET_REC_CARRIER_RANGE:
-		if (val <= 0)
-			return -EINVAL;
-
-		ir_dev->raw->lirc.carrier_low = val;
-		return 0;
-
-	case LIRC_GET_REC_RESOLUTION:
-		val = ir_dev->props->rx_resolution;
-		break;
-
-	case LIRC_SET_WIDEBAND_RECEIVER:
-		if (!ir_dev->props->s_learning_mode)
-			return -ENOSYS;
-
-		return ir_dev->props->s_learning_mode(drv_data, !!val);
-
-	case LIRC_SET_MEASURE_CARRIER_MODE:
-		if (!ir_dev->props->s_carrier_report)
-			return -ENOSYS;
-
-		return ir_dev->props->s_carrier_report(drv_data, !!val);
-
-	/* Generic timeout support */
-	case LIRC_GET_MIN_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
-			return -ENOSYS;
-		val = ir_dev->props->min_timeout / 1000;
-		break;
-
-	case LIRC_GET_MAX_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
-			return -ENOSYS;
-		val = ir_dev->props->max_timeout / 1000;
-		break;
-
-	case LIRC_SET_REC_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
-			return -ENOSYS;
-
-		tmp = val * 1000;
-
-		if (tmp < ir_dev->props->min_timeout ||
-			tmp > ir_dev->props->max_timeout)
-				return -EINVAL;
-
-		ir_dev->props->timeout = tmp;
-		break;
-
-	case LIRC_SET_REC_TIMEOUT_REPORTS:
-		lirc->send_timeout_reports = !!val;
-		break;
-
-	default:
-		return lirc_dev_fop_ioctl(filep, cmd, arg);
-	}
-
-	if (_IOC_DIR(cmd) & _IOC_READ)
-		ret = put_user(val, (__u32 *)arg);
-
-	return ret;
-}
-
-static int ir_lirc_open(void *data)
-{
-	return 0;
-}
-
-static void ir_lirc_close(void *data)
-{
-	return;
-}
-
-static struct file_operations lirc_fops = {
-	.owner		= THIS_MODULE,
-	.write		= ir_lirc_transmit_ir,
-	.unlocked_ioctl	= ir_lirc_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl	= ir_lirc_ioctl,
-#endif
-	.read		= lirc_dev_fop_read,
-	.poll		= lirc_dev_fop_poll,
-	.open		= lirc_dev_fop_open,
-	.release	= lirc_dev_fop_close,
-	.llseek		= no_llseek,
-};
-
-static int ir_lirc_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_driver *drv;
-	struct lirc_buffer *rbuf;
-	int rc = -ENOMEM;
-	unsigned long features;
-
-	drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-	if (!drv)
-		return rc;
-
-	rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-	if (!rbuf)
-		goto rbuf_alloc_failed;
-
-	rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
-	if (rc)
-		goto rbuf_init_failed;
-
-	features = LIRC_CAN_REC_MODE2;
-	if (ir_dev->props->tx_ir) {
-
-		features |= LIRC_CAN_SEND_PULSE;
-		if (ir_dev->props->s_tx_mask)
-			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
-		if (ir_dev->props->s_tx_carrier)
-			features |= LIRC_CAN_SET_SEND_CARRIER;
-
-		if (ir_dev->props->s_tx_duty_cycle)
-			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
-	}
-
-	if (ir_dev->props->s_rx_carrier_range)
-		features |= LIRC_CAN_SET_REC_CARRIER |
-			LIRC_CAN_SET_REC_CARRIER_RANGE;
-
-	if (ir_dev->props->s_learning_mode)
-		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
-
-	if (ir_dev->props->s_carrier_report)
-		features |= LIRC_CAN_MEASURE_CARRIER;
-
-
-	if (ir_dev->props->max_timeout)
-		features |= LIRC_CAN_SET_REC_TIMEOUT;
-
-
-	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
-		 ir_dev->driver_name);
-	drv->minor = -1;
-	drv->features = features;
-	drv->data = &ir_dev->raw->lirc;
-	drv->rbuf = rbuf;
-	drv->set_use_inc = &ir_lirc_open;
-	drv->set_use_dec = &ir_lirc_close;
-	drv->code_length = sizeof(struct ir_raw_event) * 8;
-	drv->fops = &lirc_fops;
-	drv->dev = &ir_dev->dev;
-	drv->owner = THIS_MODULE;
-
-	drv->minor = lirc_register_driver(drv);
-	if (drv->minor < 0) {
-		rc = -ENODEV;
-		goto lirc_register_failed;
-	}
-
-	ir_dev->raw->lirc.drv = drv;
-	ir_dev->raw->lirc.ir_dev = ir_dev;
-	return 0;
-
-lirc_register_failed:
-rbuf_init_failed:
-	kfree(rbuf);
-rbuf_alloc_failed:
-	kfree(drv);
-
-	return rc;
-}
-
-static int ir_lirc_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
-
-	lirc_unregister_driver(lirc->drv->minor);
-	lirc_buffer_free(lirc->drv->rbuf);
-	kfree(lirc->drv);
-
-	return 0;
-}
-
-static struct ir_raw_handler lirc_handler = {
-	.protocols	= IR_TYPE_LIRC,
-	.decode		= ir_lirc_decode,
-	.raw_register	= ir_lirc_register,
-	.raw_unregister	= ir_lirc_unregister,
-};
-
-static int __init ir_lirc_codec_init(void)
-{
-	ir_raw_handler_register(&lirc_handler);
-
-	printk(KERN_INFO "IR LIRC bridge handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_lirc_codec_exit(void)
-{
-	ir_raw_handler_unregister(&lirc_handler);
-}
-
-module_init(ir_lirc_codec_init);
-module_exit(ir_lirc_codec_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("LIRC IR handler bridge");
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
deleted file mode 100644
index 70993f79c8a2..000000000000
--- a/drivers/media/IR/ir-nec-decoder.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define NEC_NBITS		32
-#define NEC_UNIT		562500  /* ns */
-#define NEC_HEADER_PULSE	(16 * NEC_UNIT)
-#define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
-#define NEC_HEADER_SPACE	(8  * NEC_UNIT)
-#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
-#define NEC_BIT_PULSE		(1  * NEC_UNIT)
-#define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
-#define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
-#define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
-#define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
-#define NECX_REPEAT_BITS	1
-
-enum nec_state {
-	STATE_INACTIVE,
-	STATE_HEADER_SPACE,
-	STATE_BIT_PULSE,
-	STATE_BIT_SPACE,
-	STATE_TRAILER_PULSE,
-	STATE_TRAILER_SPACE,
-};
-
-/**
- * ir_nec_decode() - Decode one NEC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @duration:	the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct nec_dec *data = &ir_dev->raw->nec;
-	u32 scancode;
-	u8 address, not_address, command, not_command;
-
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
-		return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
-			data->is_nec_x = false;
-			data->necx_repeat = false;
-		} else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
-			data->is_nec_x = true;
-		else
-			break;
-
-		data->count = 0;
-		data->state = STATE_HEADER_SPACE;
-		return 0;
-
-	case STATE_HEADER_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) {
-			data->state = STATE_BIT_PULSE;
-			return 0;
-		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			ir_repeat(input_dev);
-			IR_dprintk(1, "Repeat last key\n");
-			data->state = STATE_TRAILER_PULSE;
-			return 0;
-		}
-
-		break;
-
-	case STATE_BIT_PULSE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2))
-			break;
-
-		data->state = STATE_BIT_SPACE;
-		return 0;
-
-	case STATE_BIT_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
-			geq_margin(ev.duration,
-			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
-				IR_dprintk(1, "Repeat last key\n");
-				ir_repeat(input_dev);
-				data->state = STATE_INACTIVE;
-				return 0;
-
-		} else if (data->count > NECX_REPEAT_BITS)
-			data->necx_repeat = false;
-
-		data->bits <<= 1;
-		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
-			data->bits |= 1;
-		else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
-			break;
-		data->count++;
-
-		if (data->count == NEC_NBITS)
-			data->state = STATE_TRAILER_PULSE;
-		else
-			data->state = STATE_BIT_PULSE;
-
-		return 0;
-
-	case STATE_TRAILER_PULSE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2))
-			break;
-
-		data->state = STATE_TRAILER_SPACE;
-		return 0;
-
-	case STATE_TRAILER_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
-			break;
-
-		address     = bitrev8((data->bits >> 24) & 0xff);
-		not_address = bitrev8((data->bits >> 16) & 0xff);
-		command	    = bitrev8((data->bits >>  8) & 0xff);
-		not_command = bitrev8((data->bits >>  0) & 0xff);
-
-		if ((command ^ not_command) != 0xff) {
-			IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
-				   data->bits);
-			break;
-		}
-
-		if ((address ^ not_address) != 0xff) {
-			/* Extended NEC */
-			scancode = address     << 16 |
-				   not_address <<  8 |
-				   command;
-			IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode);
-		} else {
-			/* Normal NEC */
-			scancode = address << 8 | command;
-			IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
-		}
-
-		if (data->is_nec_x)
-			data->necx_repeat = true;
-
-		ir_keydown(input_dev, scancode, 0);
-		data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler nec_handler = {
-	.protocols	= IR_TYPE_NEC,
-	.decode		= ir_nec_decode,
-};
-
-static int __init ir_nec_decode_init(void)
-{
-	ir_raw_handler_register(&nec_handler);
-
-	printk(KERN_INFO "IR NEC protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_nec_decode_exit(void)
-{
-	ir_raw_handler_unregister(&nec_handler);
-}
-
-module_init(ir_nec_decode_init);
-module_exit(ir_nec_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("NEC IR protocol decoder");
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
deleted file mode 100644
index a06a07e4e0b1..000000000000
--- a/drivers/media/IR/ir-raw-event.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/kthread.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/freezer.h>
-#include "ir-core-priv.h"
-
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE      512
-
-/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
-static LIST_HEAD(ir_raw_client_list);
-
-/* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
-static LIST_HEAD(ir_raw_handler_list);
-static u64 available_protocols;
-
-#ifdef MODULE
-/* Used to load the decoders */
-static struct work_struct wq_load;
-#endif
-
-static int ir_raw_event_thread(void *data)
-{
-	struct ir_raw_event ev;
-	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
-	int retval;
-
-	while (!kthread_should_stop()) {
-
-		spin_lock_irq(&raw->lock);
-		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
-
-		if (!retval) {
-			set_current_state(TASK_INTERRUPTIBLE);
-
-			if (kthread_should_stop())
-				set_current_state(TASK_RUNNING);
-
-			spin_unlock_irq(&raw->lock);
-			schedule();
-			continue;
-		}
-
-		spin_unlock_irq(&raw->lock);
-
-
-		BUG_ON(retval != sizeof(ev));
-
-		mutex_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
-		raw->prev_ev = ev;
-		mutex_unlock(&ir_raw_handler_lock);
-	}
-
-	return 0;
-}
-
-/**
- * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev:	the struct input_dev device descriptor
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This routine (which may be called from an interrupt context) stores a
- * pulse/space duration for the raw ir decoding state machines. Pulses are
- * signalled as positive values and spaces as negative values. A zero value
- * will reset the decoding state machines.
- */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
-	if (!ir->raw)
-		return -EINVAL;
-
-	IR_dprintk(2, "sample: (%05dus %s)\n",
-		TO_US(ev->duration), TO_STR(ev->pulse));
-
-	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
-		return -ENOMEM;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store);
-
-/**
- * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev:	the struct input_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) is used to
- * store the beginning of an ir pulse or space (or the start/end of ir
- * reception) for the raw ir decoding state machines. This is used by
- * hardware which does not provide durations directly but only interrupts
- * (or similar events) on state change.
- */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
-{
-	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
-	ktime_t			now;
-	s64			delta; /* ns */
-	struct ir_raw_event	ev;
-	int			rc = 0;
-
-	if (!ir->raw)
-		return -EINVAL;
-
-	now = ktime_get();
-	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
-
-	/* Check for a long duration since last event or if we're
-	 * being called for the first time, note that delta can't
-	 * possibly be negative.
-	 */
-	ev.duration = 0;
-	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
-		type |= IR_START_EVENT;
-	else
-		ev.duration = delta;
-
-	if (type & IR_START_EVENT)
-		ir_raw_event_reset(input_dev);
-	else if (ir->raw->last_type & IR_SPACE) {
-		ev.pulse = false;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else if (ir->raw->last_type & IR_PULSE) {
-		ev.pulse = true;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else
-		return 0;
-
-	ir->raw->last_event = now;
-	ir->raw->last_type = type;
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
-
-/**
- * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev:	the struct input_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
- * This routine is intended for devices with limited internal buffer
- * It automerges samples of same type, and handles timeouts
- */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-						struct ir_raw_event *ev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!raw || !ir->props)
-		return -EINVAL;
-
-	/* Ignore spaces in idle mode */
-	if (ir->idle && !ev->pulse)
-		return 0;
-	else if (ir->idle)
-		ir_raw_event_set_idle(input_dev, false);
-
-	if (!raw->this_ev.duration) {
-		raw->this_ev = *ev;
-	} else if (ev->pulse == raw->this_ev.pulse) {
-		raw->this_ev.duration += ev->duration;
-	} else {
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		raw->this_ev = *ev;
-	}
-
-	/* Enter idle mode if nessesary */
-	if (!ev->pulse && ir->props->timeout &&
-		raw->this_ev.duration >= ir->props->timeout) {
-		ir_raw_event_set_idle(input_dev, true);
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
-
-/**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
- */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!ir->props || !ir->raw)
-		return;
-
-	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
-
-	if (idle) {
-		raw->this_ev.timeout = true;
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		init_ir_raw_event(&raw->this_ev);
-	}
-
-	if (ir->props->s_idle)
-		ir->props->s_idle(ir->props->priv, idle);
-	ir->idle = idle;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
-
-/**
- * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev:	the struct input_dev device descriptor
- *
- * This routine will signal the workqueue to start decoding stored ir data.
- */
-void ir_raw_event_handle(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	unsigned long flags;
-
-	if (!ir->raw)
-		return;
-
-	spin_lock_irqsave(&ir->raw->lock, flags);
-	wake_up_process(ir->raw->thread);
-	spin_unlock_irqrestore(&ir->raw->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_handle);
-
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_allowed_protocols()
-{
-	u64 protocols;
-	mutex_lock(&ir_raw_handler_lock);
-	protocols = available_protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-	return protocols;
-}
-
-/*
- * Used to (un)register raw event clients
- */
-int ir_raw_event_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	int rc;
-	struct ir_raw_handler *handler;
-
-	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
-	if (!ir->raw)
-		return -ENOMEM;
-
-	ir->raw->input_dev = input_dev;
-
-	ir->raw->enabled_protocols = ~0;
-	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
-			 GFP_KERNEL);
-	if (rc < 0) {
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
-	}
-
-	spin_lock_init(&ir->raw->lock);
-	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
-			"rc%u",  (unsigned int)ir->devno);
-
-	if (IS_ERR(ir->raw->thread)) {
-		int ret = PTR_ERR(ir->raw->thread);
-
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return ret;
-	}
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir->raw->list, &ir_raw_client_list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_register)
-			handler->raw_register(ir->raw->input_dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-}
-
-void ir_raw_event_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_handler *handler;
-
-	if (!ir->raw)
-		return;
-
-	kthread_stop(ir->raw->thread);
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir->raw->list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_unregister)
-			handler->raw_unregister(ir->raw->input_dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	kfifo_free(&ir->raw->kfifo);
-	kfree(ir->raw);
-	ir->raw = NULL;
-}
-
-/*
- * Extension interface - used to register the IR decoders
- */
-
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
-	if (ir_raw_handler->raw_register)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_register(raw->input_dev);
-	available_protocols |= ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ir_raw_handler_register);
-
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir_raw_handler->list);
-	if (ir_raw_handler->raw_unregister)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_unregister(raw->input_dev);
-	available_protocols &= ~ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-}
-EXPORT_SYMBOL(ir_raw_handler_unregister);
-
-#ifdef MODULE
-static void init_decoders(struct work_struct *work)
-{
-	/* Load the decoder modules */
-
-	load_nec_decode();
-	load_rc5_decode();
-	load_rc6_decode();
-	load_jvc_decode();
-	load_sony_decode();
-	load_lirc_codec();
-
-	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at ir-core.h
-	 */
-}
-#endif
-
-void ir_raw_init(void)
-{
-#ifdef MODULE
-	INIT_WORK(&wq_load, init_decoders);
-	schedule_work(&wq_load);
-#endif
-}
diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/IR/ir-rc5-decoder.c
deleted file mode 100644
index 572ed4ca8c68..000000000000
--- a/drivers/media/IR/ir-rc5-decoder.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-/*
- * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols.
- * There are other variants that use a different number of bits.
- * This is currently unsupported.
- * It considers a carrier of 36 kHz, with a total of 14/20 bits, where
- * the first two bits are start bits, and a third one is a filing bit
- */
-
-#include "ir-core-priv.h"
-
-#define RC5_NBITS		14
-#define RC5X_NBITS		20
-#define CHECK_RC5X_NBITS	8
-#define RC5_UNIT		888888 /* ns */
-#define RC5_BIT_START		(1 * RC5_UNIT)
-#define RC5_BIT_END		(1 * RC5_UNIT)
-#define RC5X_SPACE		(4 * RC5_UNIT)
-
-enum rc5_state {
-	STATE_INACTIVE,
-	STATE_BIT_START,
-	STATE_BIT_END,
-	STATE_CHECK_RC5X,
-	STATE_FINISHED,
-};
-
-/**
- * ir_rc5_decode() - Decode one RC-5 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_dec *data = &ir_dev->raw->rc5;
-	u8 toggle;
-	u32 scancode;
-
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
-                return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
-		goto out;
-
-again:
-	IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
-		return 0;
-
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		data->state = STATE_BIT_START;
-		data->count = 1;
-		/* We just need enough bits to get to STATE_CHECK_RC5X */
-		data->wanted_bits = RC5X_NBITS;
-		decrease_duration(&ev, RC5_BIT_START);
-		goto again;
-
-	case STATE_BIT_START:
-		if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
-			break;
-
-		data->bits <<= 1;
-		if (!ev.pulse)
-			data->bits |= 1;
-		data->count++;
-		data->state = STATE_BIT_END;
-		return 0;
-
-	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
-			break;
-
-		if (data->count == data->wanted_bits)
-			data->state = STATE_FINISHED;
-		else if (data->count == CHECK_RC5X_NBITS)
-			data->state = STATE_CHECK_RC5X;
-		else
-			data->state = STATE_BIT_START;
-
-		decrease_duration(&ev, RC5_BIT_END);
-		goto again;
-
-	case STATE_CHECK_RC5X:
-		if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
-			/* RC5X */
-			data->wanted_bits = RC5X_NBITS;
-			decrease_duration(&ev, RC5X_SPACE);
-		} else {
-			/* RC5 */
-			data->wanted_bits = RC5_NBITS;
-		}
-		data->state = STATE_BIT_START;
-		goto again;
-
-	case STATE_FINISHED:
-		if (ev.pulse)
-			break;
-
-		if (data->wanted_bits == RC5X_NBITS) {
-			/* RC5X */
-			u8 xdata, command, system;
-			xdata    = (data->bits & 0x0003F) >> 0;
-			command  = (data->bits & 0x00FC0) >> 6;
-			system   = (data->bits & 0x1F000) >> 12;
-			toggle   = (data->bits & 0x20000) ? 1 : 0;
-			command += (data->bits & 0x01000) ? 0 : 0x40;
-			scancode = system << 16 | command << 8 | xdata;
-
-			IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
-				   scancode, toggle);
-
-		} else {
-			/* RC5 */
-			u8 command, system;
-			command  = (data->bits & 0x0003F) >> 0;
-			system   = (data->bits & 0x007C0) >> 6;
-			toggle   = (data->bits & 0x00800) ? 1 : 0;
-			command += (data->bits & 0x01000) ? 0 : 0x40;
-			scancode = system << 8 | command;
-
-			IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
-				   scancode, toggle);
-		}
-
-		ir_keydown(input_dev, scancode, toggle);
-		data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-out:
-	IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler rc5_handler = {
-	.protocols	= IR_TYPE_RC5,
-	.decode		= ir_rc5_decode,
-};
-
-static int __init ir_rc5_decode_init(void)
-{
-	ir_raw_handler_register(&rc5_handler);
-
-	printk(KERN_INFO "IR RC5(x) protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_rc5_decode_exit(void)
-{
-	ir_raw_handler_unregister(&rc5_handler);
-}
-
-module_init(ir_rc5_decode_init);
-module_exit(ir_rc5_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("RC5(x) IR protocol decoder");
diff --git a/drivers/media/IR/ir-rc5-sz-decoder.c b/drivers/media/IR/ir-rc5-sz-decoder.c
deleted file mode 100644
index 7c413501a3f7..000000000000
--- a/drivers/media/IR/ir-rc5-sz-decoder.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* ir-rc5-sz-decoder.c - handle RC5 Streamzap IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-/*
- * This code handles the 15 bit RC5-ish protocol used by the Streamzap
- * PC Remote.
- * It considers a carrier of 36 kHz, with a total of 15 bits, where
- * the first two bits are start bits, and a third one is a filing bit
- */
-
-#include "ir-core-priv.h"
-
-#define RC5_SZ_NBITS		15
-#define RC5_UNIT		888888 /* ns */
-#define RC5_BIT_START		(1 * RC5_UNIT)
-#define RC5_BIT_END		(1 * RC5_UNIT)
-
-enum rc5_sz_state {
-	STATE_INACTIVE,
-	STATE_BIT_START,
-	STATE_BIT_END,
-	STATE_FINISHED,
-};
-
-/**
- * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
-	u8 toggle, command, system;
-	u32 scancode;
-
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
-                return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
-		goto out;
-
-again:
-	IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
-		return 0;
-
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		data->state = STATE_BIT_START;
-		data->count = 1;
-		data->wanted_bits = RC5_SZ_NBITS;
-		decrease_duration(&ev, RC5_BIT_START);
-		goto again;
-
-	case STATE_BIT_START:
-		if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
-			break;
-
-		data->bits <<= 1;
-		if (!ev.pulse)
-			data->bits |= 1;
-		data->count++;
-		data->state = STATE_BIT_END;
-		return 0;
-
-	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
-			break;
-
-		if (data->count == data->wanted_bits)
-			data->state = STATE_FINISHED;
-		else
-			data->state = STATE_BIT_START;
-
-		decrease_duration(&ev, RC5_BIT_END);
-		goto again;
-
-	case STATE_FINISHED:
-		if (ev.pulse)
-			break;
-
-		/* RC5-sz */
-		command  = (data->bits & 0x0003F) >> 0;
-		system   = (data->bits & 0x02FC0) >> 6;
-		toggle   = (data->bits & 0x01000) ? 1 : 0;
-		scancode = system << 6 | command;
-
-		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
-			   scancode, toggle);
-
-		ir_keydown(input_dev, scancode, toggle);
-		data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-out:
-	IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler rc5_sz_handler = {
-	.protocols	= IR_TYPE_RC5_SZ,
-	.decode		= ir_rc5_sz_decode,
-};
-
-static int __init ir_rc5_sz_decode_init(void)
-{
-	ir_raw_handler_register(&rc5_sz_handler);
-
-	printk(KERN_INFO "IR RC5 (streamzap) protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_rc5_sz_decode_exit(void)
-{
-	ir_raw_handler_unregister(&rc5_sz_handler);
-}
-
-module_init(ir_rc5_sz_decode_init);
-module_exit(ir_rc5_sz_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("RC5 (streamzap) IR protocol decoder");
diff --git a/drivers/media/IR/ir-rc6-decoder.c b/drivers/media/IR/ir-rc6-decoder.c
deleted file mode 100644
index d25da91f44ff..000000000000
--- a/drivers/media/IR/ir-rc6-decoder.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "ir-core-priv.h"
-
-/*
- * This decoder currently supports:
- * RC6-0-16	(standard toggle bit in header)
- * RC6-6A-24	(no toggle bit)
- * RC6-6A-32	(MCE version with toggle bit in body)
- */
-
-#define RC6_UNIT		444444	/* us */
-#define RC6_HEADER_NBITS	4	/* not including toggle bit */
-#define RC6_0_NBITS		16
-#define RC6_6A_SMALL_NBITS	24
-#define RC6_6A_LARGE_NBITS	32
-#define RC6_PREFIX_PULSE	(6 * RC6_UNIT)
-#define RC6_PREFIX_SPACE	(2 * RC6_UNIT)
-#define RC6_BIT_START		(1 * RC6_UNIT)
-#define RC6_BIT_END		(1 * RC6_UNIT)
-#define RC6_TOGGLE_START	(2 * RC6_UNIT)
-#define RC6_TOGGLE_END		(2 * RC6_UNIT)
-#define RC6_MODE_MASK		0x07	/* for the header bits */
-#define RC6_STARTBIT_MASK	0x08	/* for the header bits */
-#define RC6_6A_MCE_TOGGLE_MASK	0x8000	/* for the body bits */
-
-enum rc6_mode {
-	RC6_MODE_0,
-	RC6_MODE_6A,
-	RC6_MODE_UNKNOWN,
-};
-
-enum rc6_state {
-	STATE_INACTIVE,
-	STATE_PREFIX_SPACE,
-	STATE_HEADER_BIT_START,
-	STATE_HEADER_BIT_END,
-	STATE_TOGGLE_START,
-	STATE_TOGGLE_END,
-	STATE_BODY_BIT_START,
-	STATE_BODY_BIT_END,
-	STATE_FINISHED,
-};
-
-static enum rc6_mode rc6_mode(struct rc6_dec *data)
-{
-	switch (data->header & RC6_MODE_MASK) {
-	case 0:
-		return RC6_MODE_0;
-	case 6:
-		if (!data->toggle)
-			return RC6_MODE_6A;
-		/* fall through */
-	default:
-		return RC6_MODE_UNKNOWN;
-	}
-}
-
-/**
- * ir_rc6_decode() - Decode one RC6 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc6_dec *data = &ir_dev->raw->rc6;
-	u32 scancode;
-	u8 toggle;
-
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
-		return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
-		goto out;
-
-again:
-	IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-	if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
-		return 0;
-
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		/* Note: larger margin on first pulse since each RC6_UNIT
-		   is quite short and some hardware takes some time to
-		   adjust to the signal */
-		if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
-			break;
-
-		data->state = STATE_PREFIX_SPACE;
-		data->count = 0;
-		return 0;
-
-	case STATE_PREFIX_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
-			break;
-
-		data->state = STATE_HEADER_BIT_START;
-		return 0;
-
-	case STATE_HEADER_BIT_START:
-		if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
-			break;
-
-		data->header <<= 1;
-		if (ev.pulse)
-			data->header |= 1;
-		data->count++;
-		data->state = STATE_HEADER_BIT_END;
-		return 0;
-
-	case STATE_HEADER_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
-			break;
-
-		if (data->count == RC6_HEADER_NBITS)
-			data->state = STATE_TOGGLE_START;
-		else
-			data->state = STATE_HEADER_BIT_START;
-
-		decrease_duration(&ev, RC6_BIT_END);
-		goto again;
-
-	case STATE_TOGGLE_START:
-		if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
-			break;
-
-		data->toggle = ev.pulse;
-		data->state = STATE_TOGGLE_END;
-		return 0;
-
-	case STATE_TOGGLE_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
-		    !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
-			break;
-
-		if (!(data->header & RC6_STARTBIT_MASK)) {
-			IR_dprintk(1, "RC6 invalid start bit\n");
-			break;
-		}
-
-		data->state = STATE_BODY_BIT_START;
-		decrease_duration(&ev, RC6_TOGGLE_END);
-		data->count = 0;
-
-		switch (rc6_mode(data)) {
-		case RC6_MODE_0:
-			data->wanted_bits = RC6_0_NBITS;
-			break;
-		case RC6_MODE_6A:
-			/* This might look weird, but we basically
-			   check the value of the first body bit to
-			   determine the number of bits in mode 6A */
-			if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
-			    geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
-				data->wanted_bits = RC6_6A_LARGE_NBITS;
-			else
-				data->wanted_bits = RC6_6A_SMALL_NBITS;
-			break;
-		default:
-			IR_dprintk(1, "RC6 unknown mode\n");
-			goto out;
-		}
-		goto again;
-
-	case STATE_BODY_BIT_START:
-		if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
-			break;
-
-		data->body <<= 1;
-		if (ev.pulse)
-			data->body |= 1;
-		data->count++;
-		data->state = STATE_BODY_BIT_END;
-		return 0;
-
-	case STATE_BODY_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
-			break;
-
-		if (data->count == data->wanted_bits)
-			data->state = STATE_FINISHED;
-		else
-			data->state = STATE_BODY_BIT_START;
-
-		decrease_duration(&ev, RC6_BIT_END);
-		goto again;
-
-	case STATE_FINISHED:
-		if (ev.pulse)
-			break;
-
-		switch (rc6_mode(data)) {
-		case RC6_MODE_0:
-			scancode = data->body & 0xffff;
-			toggle = data->toggle;
-			IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
-				   scancode, toggle);
-			break;
-		case RC6_MODE_6A:
-			if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
-				toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
-				scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
-			} else {
-				toggle = 0;
-				scancode = data->body & 0xffffff;
-			}
-
-			IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
-				   scancode, toggle);
-			break;
-		default:
-			IR_dprintk(1, "RC6 unknown mode\n");
-			goto out;
-		}
-
-		ir_keydown(input_dev, scancode, toggle);
-		data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-out:
-	IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler rc6_handler = {
-	.protocols	= IR_TYPE_RC6,
-	.decode		= ir_rc6_decode,
-};
-
-static int __init ir_rc6_decode_init(void)
-{
-	ir_raw_handler_register(&rc6_handler);
-
-	printk(KERN_INFO "IR RC6 protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_rc6_decode_exit(void)
-{
-	ir_raw_handler_unregister(&rc6_handler);
-}
-
-module_init(ir_rc6_decode_init);
-module_exit(ir_rc6_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("RC6 IR protocol decoder");
diff --git a/drivers/media/IR/ir-sony-decoder.c b/drivers/media/IR/ir-sony-decoder.c
deleted file mode 100644
index 2d15730822bc..000000000000
--- a/drivers/media/IR/ir-sony-decoder.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define SONY_UNIT		600000 /* ns */
-#define SONY_HEADER_PULSE	(4 * SONY_UNIT)
-#define	SONY_HEADER_SPACE	(1 * SONY_UNIT)
-#define SONY_BIT_0_PULSE	(1 * SONY_UNIT)
-#define SONY_BIT_1_PULSE	(2 * SONY_UNIT)
-#define SONY_BIT_SPACE		(1 * SONY_UNIT)
-#define SONY_TRAILER_SPACE	(10 * SONY_UNIT) /* minimum */
-
-enum sony_state {
-	STATE_INACTIVE,
-	STATE_HEADER_SPACE,
-	STATE_BIT_PULSE,
-	STATE_BIT_SPACE,
-	STATE_FINISHED,
-};
-
-/**
- * ir_sony_decode() - Decode one Sony pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
- * @ev:         the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct sony_dec *data = &ir_dev->raw->sony;
-	u32 scancode;
-	u8 device, subdevice, function;
-
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
-		return 0;
-
-	if (!is_timing_event(ev)) {
-		if (ev.reset)
-			data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-	if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
-		goto out;
-
-	IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-	switch (data->state) {
-
-	case STATE_INACTIVE:
-		if (!ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
-			break;
-
-		data->count = 0;
-		data->state = STATE_HEADER_SPACE;
-		return 0;
-
-	case STATE_HEADER_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
-			break;
-
-		data->state = STATE_BIT_PULSE;
-		return 0;
-
-	case STATE_BIT_PULSE:
-		if (!ev.pulse)
-			break;
-
-		data->bits <<= 1;
-		if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
-			data->bits |= 1;
-		else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
-			break;
-
-		data->count++;
-		data->state = STATE_BIT_SPACE;
-		return 0;
-
-	case STATE_BIT_SPACE:
-		if (ev.pulse)
-			break;
-
-		if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
-			break;
-
-		decrease_duration(&ev, SONY_BIT_SPACE);
-
-		if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
-			data->state = STATE_BIT_PULSE;
-			return 0;
-		}
-
-		data->state = STATE_FINISHED;
-		/* Fall through */
-
-	case STATE_FINISHED:
-		if (ev.pulse)
-			break;
-
-		if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
-			break;
-
-		switch (data->count) {
-		case 12:
-			device    = bitrev8((data->bits <<  3) & 0xF8);
-			subdevice = 0;
-			function  = bitrev8((data->bits >>  4) & 0xFE);
-			break;
-		case 15:
-			device    = bitrev8((data->bits >>  0) & 0xFF);
-			subdevice = 0;
-			function  = bitrev8((data->bits >>  7) & 0xFD);
-			break;
-		case 20:
-			device    = bitrev8((data->bits >>  5) & 0xF8);
-			subdevice = bitrev8((data->bits >>  0) & 0xFF);
-			function  = bitrev8((data->bits >> 12) & 0xFE);
-			break;
-		default:
-			IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
-			goto out;
-		}
-
-		scancode = device << 16 | subdevice << 8 | function;
-		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
-		ir_keydown(input_dev, scancode, 0);
-		data->state = STATE_INACTIVE;
-		return 0;
-	}
-
-out:
-	IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
-		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-	data->state = STATE_INACTIVE;
-	return -EINVAL;
-}
-
-static struct ir_raw_handler sony_handler = {
-	.protocols	= IR_TYPE_SONY,
-	.decode		= ir_sony_decode,
-};
-
-static int __init ir_sony_decode_init(void)
-{
-	ir_raw_handler_register(&sony_handler);
-
-	printk(KERN_INFO "IR Sony protocol handler initialized\n");
-	return 0;
-}
-
-static void __exit ir_sony_decode_exit(void)
-{
-	ir_raw_handler_unregister(&sony_handler);
-}
-
-module_init(ir_sony_decode_init);
-module_exit(ir_sony_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Sony IR protocol decoder");
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
deleted file mode 100644
index 38423a8da871..000000000000
--- a/drivers/media/IR/ir-sysfs.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "ir-core-priv.h"
-
-#define IRRCV_NUM_DEVICES	256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
-	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
-	.name		= "rc",
-	.devnode	= ir_devnode,
-};
-
-static struct {
-	u64	type;
-	char	*name;
-} proto_names[] = {
-	{ IR_TYPE_UNKNOWN,	"unknown"	},
-	{ IR_TYPE_RC5,		"rc-5"		},
-	{ IR_TYPE_NEC,		"nec"		},
-	{ IR_TYPE_RC6,		"rc-6"		},
-	{ IR_TYPE_JVC,		"jvc"		},
-	{ IR_TYPE_SONY,		"sony"		},
-	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ IR_TYPE_LIRC,		"lirc"		},
-};
-
-#define PROTO_NONE	"none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
-			      struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 allowed, enabled;
-	char *tmp = buf;
-	int i;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = ir_dev->rc_tab.ir_type;
-		allowed = ir_dev->props->allowed_protos;
-	} else if (ir_dev->raw) {
-		enabled = ir_dev->raw->enabled_protocols;
-		allowed = ir_raw_get_allowed_protocols();
-	} else
-		return sprintf(tmp, "[builtin]\n");
-
-	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
-		   (long long)allowed,
-		   (long long)enabled);
-
-	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-		if (allowed & enabled & proto_names[i].type)
-			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
-		else if (allowed & proto_names[i].type)
-			tmp += sprintf(tmp, "%s ", proto_names[i].name);
-	}
-
-	if (tmp != buf)
-		tmp--;
-	*tmp = '\n';
-	return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the input buffer
- * @len:	length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
-			       struct device_attribute *mattr,
-			       const char *data,
-			       size_t len)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	bool enable, disable;
-	const char *tmp;
-	u64 type;
-	u64 mask;
-	int rc, i, count = 0;
-	unsigned long flags;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else if (ir_dev->raw)
-		type = ir_dev->raw->enabled_protocols;
-	else {
-		IR_dprintk(1, "Protocol switching not supported\n");
-		return -EINVAL;
-	}
-
-	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
-		if (!*tmp)
-			break;
-
-		if (*tmp == '+') {
-			enable = true;
-			disable = false;
-			tmp++;
-		} else if (*tmp == '-') {
-			enable = false;
-			disable = true;
-			tmp++;
-		} else {
-			enable = false;
-			disable = false;
-		}
-
-		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
-			tmp += sizeof(PROTO_NONE);
-			mask = 0;
-			count++;
-		} else {
-			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
-					tmp += strlen(proto_names[i].name);
-					mask = proto_names[i].type;
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(proto_names)) {
-				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
-				return -EINVAL;
-			}
-			count++;
-		}
-
-		if (enable)
-			type |= mask;
-		else if (disable)
-			type &= ~mask;
-		else
-			type = mask;
-	}
-
-	if (!count) {
-		IR_dprintk(1, "Protocol not specified\n");
-		return -EINVAL;
-	}
-
-	if (ir_dev->props && ir_dev->props->change_protocol) {
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    type);
-		if (rc < 0) {
-			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
-				   (long long)type);
-			return -EINVAL;
-		}
-	}
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-		ir_dev->rc_tab.ir_type = type;
-		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
-	} else {
-		ir_dev->raw->enabled_protocols = type;
-	}
-
-	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
-		   (long long)type);
-
-	return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...)					\
-	do {								\
-		int err = add_uevent_var(env, fmt, val);		\
-		if (err)						\
-			return err;					\
-	} while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
-	if (ir_dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
-	if (ir_dev->driver_name)
-		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
-	return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-		   show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
-	&dev_attr_protocols.attr,
-	NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
-	.attrs	= rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
-	&rc_dev_attr_grp,
-	NULL
-};
-
-static struct device_type rc_dev_type = {
-	.groups		= rc_dev_attr_groups,
-	.uevent		= rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int devno = find_first_zero_bit(&ir_core_dev_number,
-					IRRCV_NUM_DEVICES);
-
-	if (unlikely(devno < 0))
-		return devno;
-
-	ir_dev->dev.type = &rc_dev_type;
-	ir_dev->devno = devno;
-
-	ir_dev->dev.class = &ir_input_class;
-	ir_dev->dev.parent = input_dev->dev.parent;
-	input_dev->dev.parent = &ir_dev->dev;
-	dev_set_name(&ir_dev->dev, "rc%d", devno);
-	dev_set_drvdata(&ir_dev->dev, ir_dev);
-	return  device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev:	the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int rc;
-	const char *path;
-
-
-	rc = input_register_device(input_dev);
-	if (rc < 0) {
-		device_del(&ir_dev->dev);
-		return rc;
-	}
-
-	__module_get(THIS_MODULE);
-
-	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "%s: %s as %s\n",
-		dev_name(&ir_dev->dev),
-		input_dev->name ? input_dev->name : "Unspecified device",
-		path ? path : "N/A");
-	kfree(path);
-
-	set_bit(ir_dev->devno, &ir_core_dev_number);
-	return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- *			   /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	input_set_drvdata(input_dev, NULL);
-	clear_bit(ir_dev->devno, &ir_core_dev_number);
-	input_unregister_device(input_dev);
-	device_del(&ir_dev->dev);
-
-	module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
-	int rc = class_register(&ir_input_class);
-	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
-		return rc;
-	}
-
-	/* Initialize/load the decoders/keymap code that will be used */
-	ir_raw_init();
-	ir_rcmap_init();
-
-	return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
-	class_unregister(&ir_input_class);
-	ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
diff --git a/drivers/media/IR/keymaps/Kconfig b/drivers/media/IR/keymaps/Kconfig
deleted file mode 100644
index 14b22f58f823..000000000000
--- a/drivers/media/IR/keymaps/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config RC_MAP
-	tristate "Compile Remote Controller keymap modules"
-	depends on IR_CORE
-	default y
-
-	---help---
-	   This option enables the compilation of lots of Remote
-	   Controller tables. They are short tables, but if you
-	   don't use a remote controller, or prefer to load the
-	   tables on userspace, you should disable it.
-
-	   The ir-keytable program, available at v4l-utils package
-	   provide the tool and the same RC maps for load from
-	   userspace. Its available at
-			http://git.linuxtv.org/v4l-utils
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
deleted file mode 100644
index 3194d391bbd4..000000000000
--- a/drivers/media/IR/keymaps/Makefile
+++ /dev/null
@@ -1,86 +0,0 @@
-obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
-			rc-alink-dtu-m.o \
-			rc-anysee.o \
-			rc-apac-viewcomp.o \
-			rc-asus-pc39.o \
-			rc-ati-tv-wonder-hd-600.o \
-			rc-avermedia-a16d.o \
-			rc-avermedia.o \
-			rc-avermedia-cardbus.o \
-			rc-avermedia-dvbt.o \
-			rc-avermedia-m135a.o \
-			rc-avermedia-m733a-rm-k6.o \
-			rc-avermedia-rm-ks.o \
-			rc-avertv-303.o \
-			rc-azurewave-ad-tu700.o \
-			rc-behold.o \
-			rc-behold-columbus.o \
-			rc-budget-ci-old.o \
-			rc-cinergy-1400.o \
-			rc-cinergy.o \
-			rc-dib0700-nec.o \
-			rc-dib0700-rc5.o \
-			rc-digitalnow-tinytwin.o \
-			rc-digittrade.o \
-			rc-dm1105-nec.o \
-			rc-dntv-live-dvb-t.o \
-			rc-dntv-live-dvbt-pro.o \
-			rc-em-terratec.o \
-			rc-encore-enltv2.o \
-			rc-encore-enltv.o \
-			rc-encore-enltv-fm53.o \
-			rc-evga-indtube.o \
-			rc-eztv.o \
-			rc-flydvb.o \
-			rc-flyvideo.o \
-			rc-fusionhdtv-mce.o \
-			rc-gadmei-rm008z.o \
-			rc-genius-tvgo-a11mce.o \
-			rc-gotview7135.o \
-			rc-hauppauge-new.o \
-			rc-imon-mce.o \
-			rc-imon-pad.o \
-			rc-iodata-bctv7e.o \
-			rc-kaiomy.o \
-			rc-kworld-315u.o \
-			rc-kworld-plus-tv-analog.o \
-			rc-leadtek-y04g0051.o \
-			rc-lirc.o \
-			rc-lme2510.o \
-			rc-manli.o \
-			rc-msi-digivox-ii.o \
-			rc-msi-digivox-iii.o \
-			rc-msi-tvanywhere.o \
-			rc-msi-tvanywhere-plus.o \
-			rc-nebula.o \
-			rc-nec-terratec-cinergy-xs.o \
-			rc-norwood.o \
-			rc-npgtech.o \
-			rc-pctv-sedna.o \
-			rc-pinnacle-color.o \
-			rc-pinnacle-grey.o \
-			rc-pinnacle-pctv-hd.o \
-			rc-pixelview.o \
-			rc-pixelview-mk12.o \
-			rc-pixelview-new.o \
-			rc-powercolor-real-angel.o \
-			rc-proteus-2309.o \
-			rc-purpletv.o \
-			rc-pv951.o \
-			rc-rc5-hauppauge-new.o \
-			rc-rc5-tv.o \
-			rc-rc6-mce.o \
-			rc-real-audio-220-32-keys.o \
-			rc-streamzap.o \
-			rc-tbs-nec.o \
-			rc-terratec-cinergy-xs.o \
-			rc-terratec-slim.o \
-			rc-tevii-nec.o \
-			rc-total-media-in-hand.o \
-			rc-trekstor.o \
-			rc-tt-1500.o \
-			rc-twinhan1027.o \
-			rc-videomate-s350.o \
-			rc-videomate-tv-pvr.o \
-			rc-winfast.o \
-			rc-winfast-usbii-deluxe.o
diff --git a/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c
deleted file mode 100644
index b17283176ecd..000000000000
--- a/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* ADS Tech Instant TV DVB-T PCI Remote */
-
-static struct ir_scancode adstech_dvb_t_pci[] = {
-	/* Keys 0 to 9 */
-	{ 0x4d, KEY_0 },
-	{ 0x57, KEY_1 },
-	{ 0x4f, KEY_2 },
-	{ 0x53, KEY_3 },
-	{ 0x56, KEY_4 },
-	{ 0x4e, KEY_5 },
-	{ 0x5e, KEY_6 },
-	{ 0x54, KEY_7 },
-	{ 0x4c, KEY_8 },
-	{ 0x5c, KEY_9 },
-
-	{ 0x5b, KEY_POWER },
-	{ 0x5f, KEY_MUTE },
-	{ 0x55, KEY_GOTO },
-	{ 0x5d, KEY_SEARCH },
-	{ 0x17, KEY_EPG },		/* Guide */
-	{ 0x1f, KEY_MENU },
-	{ 0x0f, KEY_UP },
-	{ 0x46, KEY_DOWN },
-	{ 0x16, KEY_LEFT },
-	{ 0x1e, KEY_RIGHT },
-	{ 0x0e, KEY_SELECT },		/* Enter */
-	{ 0x5a, KEY_INFO },
-	{ 0x52, KEY_EXIT },
-	{ 0x59, KEY_PREVIOUS },
-	{ 0x51, KEY_NEXT },
-	{ 0x58, KEY_REWIND },
-	{ 0x50, KEY_FORWARD },
-	{ 0x44, KEY_PLAYPAUSE },
-	{ 0x07, KEY_STOP },
-	{ 0x1b, KEY_RECORD },
-	{ 0x13, KEY_TUNER },		/* Live */
-	{ 0x0a, KEY_A },
-	{ 0x12, KEY_B },
-	{ 0x03, KEY_PROG1 },		/* 1 */
-	{ 0x01, KEY_PROG2 },		/* 2 */
-	{ 0x00, KEY_PROG3 },		/* 3 */
-	{ 0x06, KEY_DVD },
-	{ 0x48, KEY_AUX },		/* Photo */
-	{ 0x40, KEY_VIDEO },
-	{ 0x19, KEY_AUDIO },		/* Music */
-	{ 0x0b, KEY_CHANNELUP },
-	{ 0x08, KEY_CHANNELDOWN },
-	{ 0x15, KEY_VOLUMEUP },
-	{ 0x1c, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap adstech_dvb_t_pci_map = {
-	.map = {
-		.scan    = adstech_dvb_t_pci,
-		.size    = ARRAY_SIZE(adstech_dvb_t_pci),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_ADSTECH_DVB_T_PCI,
-	}
-};
-
-static int __init init_rc_map_adstech_dvb_t_pci(void)
-{
-	return ir_register_map(&adstech_dvb_t_pci_map);
-}
-
-static void __exit exit_rc_map_adstech_dvb_t_pci(void)
-{
-	ir_unregister_map(&adstech_dvb_t_pci_map);
-}
-
-module_init(init_rc_map_adstech_dvb_t_pci)
-module_exit(exit_rc_map_adstech_dvb_t_pci)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-alink-dtu-m.c b/drivers/media/IR/keymaps/rc-alink-dtu-m.c
deleted file mode 100644
index ddfee7f8093d..000000000000
--- a/drivers/media/IR/keymaps/rc-alink-dtu-m.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * A-Link DTU(m) remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
-static struct ir_scancode alink_dtu_m[] = {
-	{ 0x0800, KEY_VOLUMEUP },
-	{ 0x0801, KEY_1 },
-	{ 0x0802, KEY_3 },
-	{ 0x0803, KEY_7 },
-	{ 0x0804, KEY_9 },
-	{ 0x0805, KEY_NEW },             /* symbol: PIP */
-	{ 0x0806, KEY_0 },
-	{ 0x0807, KEY_CHANNEL },         /* JUMP */
-	{ 0x080d, KEY_5 },
-	{ 0x080f, KEY_2 },
-	{ 0x0812, KEY_POWER2 },
-	{ 0x0814, KEY_CHANNELUP },
-	{ 0x0816, KEY_VOLUMEDOWN },
-	{ 0x0818, KEY_6 },
-	{ 0x081a, KEY_MUTE },
-	{ 0x081b, KEY_8 },
-	{ 0x081c, KEY_4 },
-	{ 0x081d, KEY_CHANNELDOWN },
-};
-
-static struct rc_keymap alink_dtu_m_map = {
-	.map = {
-		.scan    = alink_dtu_m,
-		.size    = ARRAY_SIZE(alink_dtu_m),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_ALINK_DTU_M,
-	}
-};
-
-static int __init init_rc_map_alink_dtu_m(void)
-{
-	return ir_register_map(&alink_dtu_m_map);
-}
-
-static void __exit exit_rc_map_alink_dtu_m(void)
-{
-	ir_unregister_map(&alink_dtu_m_map);
-}
-
-module_init(init_rc_map_alink_dtu_m)
-module_exit(exit_rc_map_alink_dtu_m)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-anysee.c b/drivers/media/IR/keymaps/rc-anysee.c
deleted file mode 100644
index 30d70498cfed..000000000000
--- a/drivers/media/IR/keymaps/rc-anysee.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Anysee remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode anysee[] = {
-	{ 0x0800, KEY_0 },
-	{ 0x0801, KEY_1 },
-	{ 0x0802, KEY_2 },
-	{ 0x0803, KEY_3 },
-	{ 0x0804, KEY_4 },
-	{ 0x0805, KEY_5 },
-	{ 0x0806, KEY_6 },
-	{ 0x0807, KEY_7 },
-	{ 0x0808, KEY_8 },
-	{ 0x0809, KEY_9 },
-	{ 0x080a, KEY_POWER2 },          /* [red power button] */
-	{ 0x080b, KEY_VIDEO },           /* [*] MODE */
-	{ 0x080c, KEY_CHANNEL },         /* [symbol counterclockwise arrow] */
-	{ 0x080d, KEY_NEXT },            /* [>>|] */
-	{ 0x080e, KEY_MENU },            /* MENU */
-	{ 0x080f, KEY_EPG },             /* [EPG] */
-	{ 0x0810, KEY_CLEAR },           /* EXIT */
-	{ 0x0811, KEY_CHANNELUP },
-	{ 0x0812, KEY_VOLUMEDOWN },
-	{ 0x0813, KEY_VOLUMEUP },
-	{ 0x0814, KEY_CHANNELDOWN },
-	{ 0x0815, KEY_OK },
-	{ 0x0816, KEY_RADIO },           /* [symbol TV/radio] */
-	{ 0x0817, KEY_INFO },            /* [i] */
-	{ 0x0818, KEY_PREVIOUS },        /* [|<<] */
-	{ 0x0819, KEY_FAVORITES },       /* FAV. */
-	{ 0x081a, KEY_SUBTITLE },        /* Subtitle */
-	{ 0x081b, KEY_CAMERA },          /* [symbol camera] */
-	{ 0x081c, KEY_YELLOW },
-	{ 0x081d, KEY_RED },
-	{ 0x081e, KEY_LANGUAGE },        /* [symbol Second Audio Program] */
-	{ 0x081f, KEY_GREEN },
-	{ 0x0820, KEY_SLEEP },           /* Sleep */
-	{ 0x0821, KEY_SCREEN },          /* 16:9 / 4:3 */
-	{ 0x0822, KEY_ZOOM },            /* SIZE */
-	{ 0x0824, KEY_FN },              /* [F1] */
-	{ 0x0825, KEY_FN },              /* [F2] */
-	{ 0x0842, KEY_MUTE },            /* symbol mute */
-	{ 0x0844, KEY_BLUE },
-	{ 0x0847, KEY_TEXT },            /* TEXT */
-	{ 0x0848, KEY_STOP },
-	{ 0x0849, KEY_RECORD },
-	{ 0x0850, KEY_PLAY },
-	{ 0x0851, KEY_PAUSE },
-};
-
-static struct rc_keymap anysee_map = {
-	.map = {
-		.scan    = anysee,
-		.size    = ARRAY_SIZE(anysee),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_ANYSEE,
-	}
-};
-
-static int __init init_rc_map_anysee(void)
-{
-	return ir_register_map(&anysee_map);
-}
-
-static void __exit exit_rc_map_anysee(void)
-{
-	ir_unregister_map(&anysee_map);
-}
-
-module_init(init_rc_map_anysee)
-module_exit(exit_rc_map_anysee)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-apac-viewcomp.c b/drivers/media/IR/keymaps/rc-apac-viewcomp.c
deleted file mode 100644
index 0ef2b562baf0..000000000000
--- a/drivers/media/IR/keymaps/rc-apac-viewcomp.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Attila Kondoros <attila.kondoros@chello.hu> */
-
-static struct ir_scancode apac_viewcomp[] = {
-
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x00, KEY_0 },
-	{ 0x17, KEY_LAST },		/* +100 */
-	{ 0x0a, KEY_LIST },		/* recall */
-
-
-	{ 0x1c, KEY_TUNER },		/* TV/FM */
-	{ 0x15, KEY_SEARCH },		/* scan */
-	{ 0x12, KEY_POWER },		/* power */
-	{ 0x1f, KEY_VOLUMEDOWN },	/* vol up */
-	{ 0x1b, KEY_VOLUMEUP },		/* vol down */
-	{ 0x1e, KEY_CHANNELDOWN },	/* chn up */
-	{ 0x1a, KEY_CHANNELUP },	/* chn down */
-
-	{ 0x11, KEY_VIDEO },		/* video */
-	{ 0x0f, KEY_ZOOM },		/* full screen */
-	{ 0x13, KEY_MUTE },		/* mute/unmute */
-	{ 0x10, KEY_TEXT },		/* min */
-
-	{ 0x0d, KEY_STOP },		/* freeze */
-	{ 0x0e, KEY_RECORD },		/* record */
-	{ 0x1d, KEY_PLAYPAUSE },	/* stop */
-	{ 0x19, KEY_PLAY },		/* play */
-
-	{ 0x16, KEY_GOTO },		/* osd */
-	{ 0x14, KEY_REFRESH },		/* default */
-	{ 0x0c, KEY_KPPLUS },		/* fine tune >>>> */
-	{ 0x18, KEY_KPMINUS },		/* fine tune <<<< */
-};
-
-static struct rc_keymap apac_viewcomp_map = {
-	.map = {
-		.scan    = apac_viewcomp,
-		.size    = ARRAY_SIZE(apac_viewcomp),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_APAC_VIEWCOMP,
-	}
-};
-
-static int __init init_rc_map_apac_viewcomp(void)
-{
-	return ir_register_map(&apac_viewcomp_map);
-}
-
-static void __exit exit_rc_map_apac_viewcomp(void)
-{
-	ir_unregister_map(&apac_viewcomp_map);
-}
-
-module_init(init_rc_map_apac_viewcomp)
-module_exit(exit_rc_map_apac_viewcomp)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-asus-pc39.c b/drivers/media/IR/keymaps/rc-asus-pc39.c
deleted file mode 100644
index 2996e0a3b8d5..000000000000
--- a/drivers/media/IR/keymaps/rc-asus-pc39.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* asus-pc39.h - Keytable for asus_pc39 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Marc Fargas <telenieko@telenieko.com>
- * this is the remote control that comes with the asus p7131
- * which has a label saying is "Model PC-39"
- */
-
-static struct ir_scancode asus_pc39[] = {
-	/* Keys 0 to 9 */
-	{ 0x082a, KEY_0 },
-	{ 0x0816, KEY_1 },
-	{ 0x0812, KEY_2 },
-	{ 0x0814, KEY_3 },
-	{ 0x0836, KEY_4 },
-	{ 0x0832, KEY_5 },
-	{ 0x0834, KEY_6 },
-	{ 0x080e, KEY_7 },
-	{ 0x080a, KEY_8 },
-	{ 0x080c, KEY_9 },
-
-	{ 0x0801, KEY_RADIO },		/* radio */
-	{ 0x083c, KEY_MENU },		/* dvd/menu */
-	{ 0x0815, KEY_VOLUMEUP },
-	{ 0x0826, KEY_VOLUMEDOWN },
-	{ 0x0808, KEY_UP },
-	{ 0x0804, KEY_DOWN },
-	{ 0x0818, KEY_LEFT },
-	{ 0x0810, KEY_RIGHT },
-	{ 0x081a, KEY_VIDEO },		/* video */
-	{ 0x0806, KEY_AUDIO },		/* music */
-
-	{ 0x081e, KEY_TV },		/* tv */
-	{ 0x0822, KEY_EXIT },		/* back */
-	{ 0x0835, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x0824, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x0825, KEY_ENTER },		/* enter */
-
-	{ 0x0839, KEY_PAUSE },		/* play/pause */
-	{ 0x0821, KEY_PREVIOUS },		/* rew */
-	{ 0x0819, KEY_NEXT },		/* forward */
-	{ 0x0831, KEY_REWIND },		/* backward << */
-	{ 0x0805, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x0809, KEY_STOP },
-	{ 0x0811, KEY_RECORD },		/* recording */
-	{ 0x0829, KEY_POWER },		/* the button that reads "close" */
-
-	{ 0x082e, KEY_ZOOM },		/* full screen */
-	{ 0x082c, KEY_MACRO },		/* recall */
-	{ 0x081c, KEY_HOME },		/* home */
-	{ 0x083a, KEY_PVR },		/* picture */
-	{ 0x0802, KEY_MUTE },		/* mute */
-	{ 0x083e, KEY_DVD },		/* dvd */
-};
-
-static struct rc_keymap asus_pc39_map = {
-	.map = {
-		.scan    = asus_pc39,
-		.size    = ARRAY_SIZE(asus_pc39),
-		.ir_type = IR_TYPE_RC5,
-		.name    = RC_MAP_ASUS_PC39,
-	}
-};
-
-static int __init init_rc_map_asus_pc39(void)
-{
-	return ir_register_map(&asus_pc39_map);
-}
-
-static void __exit exit_rc_map_asus_pc39(void)
-{
-	ir_unregister_map(&asus_pc39_map);
-}
-
-module_init(init_rc_map_asus_pc39)
-module_exit(exit_rc_map_asus_pc39)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c
deleted file mode 100644
index 8edfd293d010..000000000000
--- a/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* ATI TV Wonder HD 600 USB
-   Devin Heitmueller <devin.heitmueller@gmail.com>
- */
-
-static struct ir_scancode ati_tv_wonder_hd_600[] = {
-	{ 0x00, KEY_RECORD},		/* Row 1 */
-	{ 0x01, KEY_PLAYPAUSE},
-	{ 0x02, KEY_STOP},
-	{ 0x03, KEY_POWER},
-	{ 0x04, KEY_PREVIOUS},	/* Row 2 */
-	{ 0x05, KEY_REWIND},
-	{ 0x06, KEY_FORWARD},
-	{ 0x07, KEY_NEXT},
-	{ 0x08, KEY_EPG},		/* Row 3 */
-	{ 0x09, KEY_HOME},
-	{ 0x0a, KEY_MENU},
-	{ 0x0b, KEY_CHANNELUP},
-	{ 0x0c, KEY_BACK},		/* Row 4 */
-	{ 0x0d, KEY_UP},
-	{ 0x0e, KEY_INFO},
-	{ 0x0f, KEY_CHANNELDOWN},
-	{ 0x10, KEY_LEFT},		/* Row 5 */
-	{ 0x11, KEY_SELECT},
-	{ 0x12, KEY_RIGHT},
-	{ 0x13, KEY_VOLUMEUP},
-	{ 0x14, KEY_LAST},		/* Row 6 */
-	{ 0x15, KEY_DOWN},
-	{ 0x16, KEY_MUTE},
-	{ 0x17, KEY_VOLUMEDOWN},
-};
-
-static struct rc_keymap ati_tv_wonder_hd_600_map = {
-	.map = {
-		.scan    = ati_tv_wonder_hd_600,
-		.size    = ARRAY_SIZE(ati_tv_wonder_hd_600),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_ATI_TV_WONDER_HD_600,
-	}
-};
-
-static int __init init_rc_map_ati_tv_wonder_hd_600(void)
-{
-	return ir_register_map(&ati_tv_wonder_hd_600_map);
-}
-
-static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
-{
-	ir_unregister_map(&ati_tv_wonder_hd_600_map);
-}
-
-module_init(init_rc_map_ati_tv_wonder_hd_600)
-module_exit(exit_rc_map_ati_tv_wonder_hd_600)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-a16d.c b/drivers/media/IR/keymaps/rc-avermedia-a16d.c
deleted file mode 100644
index 12f043587f2e..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-a16d.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode avermedia_a16d[] = {
-	{ 0x20, KEY_LIST},
-	{ 0x00, KEY_POWER},
-	{ 0x28, KEY_1},
-	{ 0x18, KEY_2},
-	{ 0x38, KEY_3},
-	{ 0x24, KEY_4},
-	{ 0x14, KEY_5},
-	{ 0x34, KEY_6},
-	{ 0x2c, KEY_7},
-	{ 0x1c, KEY_8},
-	{ 0x3c, KEY_9},
-	{ 0x12, KEY_SUBTITLE},
-	{ 0x22, KEY_0},
-	{ 0x32, KEY_REWIND},
-	{ 0x3a, KEY_SHUFFLE},
-	{ 0x02, KEY_PRINT},
-	{ 0x11, KEY_CHANNELDOWN},
-	{ 0x31, KEY_CHANNELUP},
-	{ 0x0c, KEY_ZOOM},
-	{ 0x1e, KEY_VOLUMEDOWN},
-	{ 0x3e, KEY_VOLUMEUP},
-	{ 0x0a, KEY_MUTE},
-	{ 0x04, KEY_AUDIO},
-	{ 0x26, KEY_RECORD},
-	{ 0x06, KEY_PLAY},
-	{ 0x36, KEY_STOP},
-	{ 0x16, KEY_PAUSE},
-	{ 0x2e, KEY_REWIND},
-	{ 0x0e, KEY_FASTFORWARD},
-	{ 0x30, KEY_TEXT},
-	{ 0x21, KEY_GREEN},
-	{ 0x01, KEY_BLUE},
-	{ 0x08, KEY_EPG},
-	{ 0x2a, KEY_MENU},
-};
-
-static struct rc_keymap avermedia_a16d_map = {
-	.map = {
-		.scan    = avermedia_a16d,
-		.size    = ARRAY_SIZE(avermedia_a16d),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_AVERMEDIA_A16D,
-	}
-};
-
-static int __init init_rc_map_avermedia_a16d(void)
-{
-	return ir_register_map(&avermedia_a16d_map);
-}
-
-static void __exit exit_rc_map_avermedia_a16d(void)
-{
-	ir_unregister_map(&avermedia_a16d_map);
-}
-
-module_init(init_rc_map_avermedia_a16d)
-module_exit(exit_rc_map_avermedia_a16d)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-cardbus.c b/drivers/media/IR/keymaps/rc-avermedia-cardbus.c
deleted file mode 100644
index 2a945b02e8ca..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-cardbus.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
-
-static struct ir_scancode avermedia_cardbus[] = {
-	{ 0x00, KEY_POWER },
-	{ 0x01, KEY_TUNER },		/* TV/FM */
-	{ 0x03, KEY_TEXT },		/* Teletext */
-	{ 0x04, KEY_EPG },
-	{ 0x05, KEY_1 },
-	{ 0x06, KEY_2 },
-	{ 0x07, KEY_3 },
-	{ 0x08, KEY_AUDIO },
-	{ 0x09, KEY_4 },
-	{ 0x0a, KEY_5 },
-	{ 0x0b, KEY_6 },
-	{ 0x0c, KEY_ZOOM },		/* Full screen */
-	{ 0x0d, KEY_7 },
-	{ 0x0e, KEY_8 },
-	{ 0x0f, KEY_9 },
-	{ 0x10, KEY_PAGEUP },		/* 16-CH PREV */
-	{ 0x11, KEY_0 },
-	{ 0x12, KEY_INFO },
-	{ 0x13, KEY_AGAIN },		/* CH RTN - channel return */
-	{ 0x14, KEY_MUTE },
-	{ 0x15, KEY_EDIT },		/* Autoscan */
-	{ 0x17, KEY_SAVE },		/* Screenshot */
-	{ 0x18, KEY_PLAYPAUSE },
-	{ 0x19, KEY_RECORD },
-	{ 0x1a, KEY_PLAY },
-	{ 0x1b, KEY_STOP },
-	{ 0x1c, KEY_FASTFORWARD },
-	{ 0x1d, KEY_REWIND },
-	{ 0x1e, KEY_VOLUMEDOWN },
-	{ 0x1f, KEY_VOLUMEUP },
-	{ 0x22, KEY_SLEEP },		/* Sleep */
-	{ 0x23, KEY_ZOOM },		/* Aspect */
-	{ 0x26, KEY_SCREEN },		/* Pos */
-	{ 0x27, KEY_ANGLE },		/* Size */
-	{ 0x28, KEY_SELECT },		/* Select */
-	{ 0x29, KEY_BLUE },		/* Blue/Picture */
-	{ 0x2a, KEY_BACKSPACE },	/* Back */
-	{ 0x2b, KEY_MEDIA },		/* PIP (Picture-in-picture) */
-	{ 0x2c, KEY_DOWN },
-	{ 0x2e, KEY_DOT },
-	{ 0x2f, KEY_TV },		/* Live TV */
-	{ 0x32, KEY_LEFT },
-	{ 0x33, KEY_CLEAR },		/* Clear */
-	{ 0x35, KEY_RED },		/* Red/TV */
-	{ 0x36, KEY_UP },
-	{ 0x37, KEY_HOME },		/* Home */
-	{ 0x39, KEY_GREEN },		/* Green/Video */
-	{ 0x3d, KEY_YELLOW },		/* Yellow/Music */
-	{ 0x3e, KEY_OK },		/* Ok */
-	{ 0x3f, KEY_RIGHT },
-	{ 0x40, KEY_NEXT },		/* Next */
-	{ 0x41, KEY_PREVIOUS },		/* Previous */
-	{ 0x42, KEY_CHANNELDOWN },	/* Channel down */
-	{ 0x43, KEY_CHANNELUP },	/* Channel up */
-};
-
-static struct rc_keymap avermedia_cardbus_map = {
-	.map = {
-		.scan    = avermedia_cardbus,
-		.size    = ARRAY_SIZE(avermedia_cardbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_AVERMEDIA_CARDBUS,
-	}
-};
-
-static int __init init_rc_map_avermedia_cardbus(void)
-{
-	return ir_register_map(&avermedia_cardbus_map);
-}
-
-static void __exit exit_rc_map_avermedia_cardbus(void)
-{
-	ir_unregister_map(&avermedia_cardbus_map);
-}
-
-module_init(init_rc_map_avermedia_cardbus)
-module_exit(exit_rc_map_avermedia_cardbus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-dvbt.c b/drivers/media/IR/keymaps/rc-avermedia-dvbt.c
deleted file mode 100644
index 39dde6222875..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-dvbt.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Matt Jesson <dvb@jesson.eclipse.co.uk */
-
-static struct ir_scancode avermedia_dvbt[] = {
-	{ 0x28, KEY_0 },		/* '0' / 'enter' */
-	{ 0x22, KEY_1 },		/* '1' */
-	{ 0x12, KEY_2 },		/* '2' / 'up arrow' */
-	{ 0x32, KEY_3 },		/* '3' */
-	{ 0x24, KEY_4 },		/* '4' / 'left arrow' */
-	{ 0x14, KEY_5 },		/* '5' */
-	{ 0x34, KEY_6 },		/* '6' / 'right arrow' */
-	{ 0x26, KEY_7 },		/* '7' */
-	{ 0x16, KEY_8 },		/* '8' / 'down arrow' */
-	{ 0x36, KEY_9 },		/* '9' */
-
-	{ 0x20, KEY_LIST },		/* 'source' */
-	{ 0x10, KEY_TEXT },		/* 'teletext' */
-	{ 0x00, KEY_POWER },		/* 'power' */
-	{ 0x04, KEY_AUDIO },		/* 'audio' */
-	{ 0x06, KEY_ZOOM },		/* 'full screen' */
-	{ 0x18, KEY_VIDEO },		/* 'display' */
-	{ 0x38, KEY_SEARCH },		/* 'loop' */
-	{ 0x08, KEY_INFO },		/* 'preview' */
-	{ 0x2a, KEY_REWIND },		/* 'backward <<' */
-	{ 0x1a, KEY_FASTFORWARD },	/* 'forward >>' */
-	{ 0x3a, KEY_RECORD },		/* 'capture' */
-	{ 0x0a, KEY_MUTE },		/* 'mute' */
-	{ 0x2c, KEY_RECORD },		/* 'record' */
-	{ 0x1c, KEY_PAUSE },		/* 'pause' */
-	{ 0x3c, KEY_STOP },		/* 'stop' */
-	{ 0x0c, KEY_PLAY },		/* 'play' */
-	{ 0x2e, KEY_RED },		/* 'red' */
-	{ 0x01, KEY_BLUE },		/* 'blue' / 'cancel' */
-	{ 0x0e, KEY_YELLOW },		/* 'yellow' / 'ok' */
-	{ 0x21, KEY_GREEN },		/* 'green' */
-	{ 0x11, KEY_CHANNELDOWN },	/* 'channel -' */
-	{ 0x31, KEY_CHANNELUP },	/* 'channel +' */
-	{ 0x1e, KEY_VOLUMEDOWN },	/* 'volume -' */
-	{ 0x3e, KEY_VOLUMEUP },		/* 'volume +' */
-};
-
-static struct rc_keymap avermedia_dvbt_map = {
-	.map = {
-		.scan    = avermedia_dvbt,
-		.size    = ARRAY_SIZE(avermedia_dvbt),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_AVERMEDIA_DVBT,
-	}
-};
-
-static int __init init_rc_map_avermedia_dvbt(void)
-{
-	return ir_register_map(&avermedia_dvbt_map);
-}
-
-static void __exit exit_rc_map_avermedia_dvbt(void)
-{
-	ir_unregister_map(&avermedia_dvbt_map);
-}
-
-module_init(init_rc_map_avermedia_dvbt)
-module_exit(exit_rc_map_avermedia_dvbt)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a.c b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
deleted file mode 100644
index e4471fb2ad1e..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-m135a.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M135A with RM-JX and RM-K6 remote controls
- *
- * On Avermedia M135A with IR model RM-JX, the same codes exist on both
- * Positivo (BR) and original IR, initial version and remote control codes
- * added by Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Positivo also ships Avermedia M135A with model RM-K6, extra control
- * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- */
-
-static struct ir_scancode avermedia_m135a[] = {
-	/* RM-JX */
-	{ 0x0200, KEY_POWER2 },
-	{ 0x022e, KEY_DOT },		/* '.' */
-	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
-
-	{ 0x0205, KEY_1 },
-	{ 0x0206, KEY_2 },
-	{ 0x0207, KEY_3 },
-	{ 0x0209, KEY_4 },
-	{ 0x020a, KEY_5 },
-	{ 0x020b, KEY_6 },
-	{ 0x020d, KEY_7 },
-	{ 0x020e, KEY_8 },
-	{ 0x020f, KEY_9 },
-	{ 0x0211, KEY_0 },
-
-	{ 0x0213, KEY_RIGHT },		/* -> or L */
-	{ 0x0212, KEY_LEFT },		/* <- or R */
-
-	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
-	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
-
-	{ 0x0303, KEY_CHANNELUP },
-	{ 0x0302, KEY_CHANNELDOWN },
-	{ 0x021f, KEY_VOLUMEUP },
-	{ 0x021e, KEY_VOLUMEDOWN },
-	{ 0x020c, KEY_ENTER },		/* Full Screen */
-
-	{ 0x0214, KEY_MUTE },
-	{ 0x0208, KEY_AUDIO },
-
-	{ 0x0203, KEY_TEXT },		/* Teletext */
-	{ 0x0204, KEY_EPG },
-	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
-
-	{ 0x021d, KEY_RED },
-	{ 0x021c, KEY_YELLOW },
-	{ 0x0301, KEY_GREEN },
-	{ 0x0300, KEY_BLUE },
-
-	{ 0x021a, KEY_PLAYPAUSE },
-	{ 0x0219, KEY_RECORD },
-	{ 0x0218, KEY_PLAY },
-	{ 0x021b, KEY_STOP },
-
-	/* RM-K6 */
-	{ 0x0401, KEY_POWER2 },
-	{ 0x0406, KEY_MUTE },
-	{ 0x0408, KEY_MODE },     /* TV/FM */
-
-	{ 0x0409, KEY_1 },
-	{ 0x040a, KEY_2 },
-	{ 0x040b, KEY_3 },
-	{ 0x040c, KEY_4 },
-	{ 0x040d, KEY_5 },
-	{ 0x040e, KEY_6 },
-	{ 0x040f, KEY_7 },
-	{ 0x0410, KEY_8 },
-	{ 0x0411, KEY_9 },
-	{ 0x044c, KEY_DOT },      /* '.' */
-	{ 0x0412, KEY_0 },
-	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
-
-	{ 0x0413, KEY_AUDIO },
-	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
-	{ 0x0441, KEY_HOME },
-	{ 0x0442, KEY_BACK },
-	{ 0x0447, KEY_UP },
-	{ 0x0448, KEY_DOWN },
-	{ 0x0449, KEY_LEFT },
-	{ 0x044a, KEY_RIGHT },
-	{ 0x044b, KEY_OK },
-	{ 0x0404, KEY_VOLUMEUP },
-	{ 0x0405, KEY_VOLUMEDOWN },
-	{ 0x0402, KEY_CHANNELUP },
-	{ 0x0403, KEY_CHANNELDOWN },
-
-	{ 0x0443, KEY_RED },
-	{ 0x0444, KEY_GREEN },
-	{ 0x0445, KEY_YELLOW },
-	{ 0x0446, KEY_BLUE },
-
-	{ 0x0414, KEY_TEXT },
-	{ 0x0415, KEY_EPG },
-	{ 0x041a, KEY_TV2 },      /* PIP */
-	{ 0x041b, KEY_MHP },      /* Snapshot */
-
-	{ 0x0417, KEY_RECORD },
-	{ 0x0416, KEY_PLAYPAUSE },
-	{ 0x0418, KEY_STOP },
-	{ 0x0419, KEY_PAUSE },
-
-	{ 0x041f, KEY_PREVIOUS },
-	{ 0x041c, KEY_REWIND },
-	{ 0x041d, KEY_FORWARD },
-	{ 0x041e, KEY_NEXT },
-};
-
-static struct rc_keymap avermedia_m135a_map = {
-	.map = {
-		.scan    = avermedia_m135a,
-		.size    = ARRAY_SIZE(avermedia_m135a),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AVERMEDIA_M135A,
-	}
-};
-
-static int __init init_rc_map_avermedia_m135a(void)
-{
-	return ir_register_map(&avermedia_m135a_map);
-}
-
-static void __exit exit_rc_map_avermedia_m135a(void)
-{
-	ir_unregister_map(&avermedia_m135a_map);
-}
-
-module_init(init_rc_map_avermedia_m135a)
-module_exit(exit_rc_map_avermedia_m135a)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
deleted file mode 100644
index cf8d45717cb3..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
- *
- * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M733A with IR model RM-K6
- * This is the stock remote controller used with Positivo machines with M733A
- * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- */
-
-static struct ir_scancode avermedia_m733a_rm_k6[] = {
-	{ 0x0401, KEY_POWER2 },
-	{ 0x0406, KEY_MUTE },
-	{ 0x0408, KEY_MODE },     /* TV/FM */
-
-	{ 0x0409, KEY_1 },
-	{ 0x040a, KEY_2 },
-	{ 0x040b, KEY_3 },
-	{ 0x040c, KEY_4 },
-	{ 0x040d, KEY_5 },
-	{ 0x040e, KEY_6 },
-	{ 0x040f, KEY_7 },
-	{ 0x0410, KEY_8 },
-	{ 0x0411, KEY_9 },
-	{ 0x044c, KEY_DOT },      /* '.' */
-	{ 0x0412, KEY_0 },
-	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
-
-	{ 0x0413, KEY_AUDIO },
-	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
-	{ 0x0441, KEY_HOME },
-	{ 0x0442, KEY_BACK },
-	{ 0x0447, KEY_UP },
-	{ 0x0448, KEY_DOWN },
-	{ 0x0449, KEY_LEFT },
-	{ 0x044a, KEY_RIGHT },
-	{ 0x044b, KEY_OK },
-	{ 0x0404, KEY_VOLUMEUP },
-	{ 0x0405, KEY_VOLUMEDOWN },
-	{ 0x0402, KEY_CHANNELUP },
-	{ 0x0403, KEY_CHANNELDOWN },
-
-	{ 0x0443, KEY_RED },
-	{ 0x0444, KEY_GREEN },
-	{ 0x0445, KEY_YELLOW },
-	{ 0x0446, KEY_BLUE },
-
-	{ 0x0414, KEY_TEXT },
-	{ 0x0415, KEY_EPG },
-	{ 0x041a, KEY_TV2 },      /* PIP */
-	{ 0x041b, KEY_MHP },      /* Snapshot */
-
-	{ 0x0417, KEY_RECORD },
-	{ 0x0416, KEY_PLAYPAUSE },
-	{ 0x0418, KEY_STOP },
-	{ 0x0419, KEY_PAUSE },
-
-	{ 0x041f, KEY_PREVIOUS },
-	{ 0x041c, KEY_REWIND },
-	{ 0x041d, KEY_FORWARD },
-	{ 0x041e, KEY_NEXT },
-};
-
-static struct rc_keymap avermedia_m733a_rm_k6_map = {
-	.map = {
-		.scan    = avermedia_m733a_rm_k6,
-		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
-	}
-};
-
-static int __init init_rc_map_avermedia_m733a_rm_k6(void)
-{
-	return ir_register_map(&avermedia_m733a_rm_k6_map);
-}
-
-static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
-{
-	ir_unregister_map(&avermedia_m733a_rm_k6_map);
-}
-
-module_init(init_rc_map_avermedia_m733a_rm_k6)
-module_exit(exit_rc_map_avermedia_m733a_rm_k6)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-rm-ks.c b/drivers/media/IR/keymaps/rc-avermedia-rm-ks.c
deleted file mode 100644
index 9ee60906c861..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia-rm-ks.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * AverMedia RM-KS remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
-   and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
-/* FIXME: mappings are not 100% correct? */
-static struct ir_scancode avermedia_rm_ks[] = {
-	{ 0x0501, KEY_POWER2 },
-	{ 0x0502, KEY_CHANNELUP },
-	{ 0x0503, KEY_CHANNELDOWN },
-	{ 0x0504, KEY_VOLUMEUP },
-	{ 0x0505, KEY_VOLUMEDOWN },
-	{ 0x0506, KEY_MUTE },
-	{ 0x0507, KEY_RIGHT },
-	{ 0x0508, KEY_PROG1 },
-	{ 0x0509, KEY_1 },
-	{ 0x050a, KEY_2 },
-	{ 0x050b, KEY_3 },
-	{ 0x050c, KEY_4 },
-	{ 0x050d, KEY_5 },
-	{ 0x050e, KEY_6 },
-	{ 0x050f, KEY_7 },
-	{ 0x0510, KEY_8 },
-	{ 0x0511, KEY_9 },
-	{ 0x0512, KEY_0 },
-	{ 0x0513, KEY_AUDIO },
-	{ 0x0515, KEY_EPG },
-	{ 0x0516, KEY_PLAY },
-	{ 0x0517, KEY_RECORD },
-	{ 0x0518, KEY_STOP },
-	{ 0x051c, KEY_BACK },
-	{ 0x051d, KEY_FORWARD },
-	{ 0x054d, KEY_LEFT },
-	{ 0x0556, KEY_ZOOM },
-};
-
-static struct rc_keymap avermedia_rm_ks_map = {
-	.map = {
-		.scan    = avermedia_rm_ks,
-		.size    = ARRAY_SIZE(avermedia_rm_ks),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AVERMEDIA_RM_KS,
-	}
-};
-
-static int __init init_rc_map_avermedia_rm_ks(void)
-{
-	return ir_register_map(&avermedia_rm_ks_map);
-}
-
-static void __exit exit_rc_map_avermedia_rm_ks(void)
-{
-	ir_unregister_map(&avermedia_rm_ks_map);
-}
-
-module_init(init_rc_map_avermedia_rm_ks)
-module_exit(exit_rc_map_avermedia_rm_ks)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia.c b/drivers/media/IR/keymaps/rc-avermedia.c
deleted file mode 100644
index 21effd5bfb0d..000000000000
--- a/drivers/media/IR/keymaps/rc-avermedia.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* avermedia.h - Keytable for avermedia Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Alex Hermann <gaaf@gmx.net> */
-
-static struct ir_scancode avermedia[] = {
-	{ 0x28, KEY_1 },
-	{ 0x18, KEY_2 },
-	{ 0x38, KEY_3 },
-	{ 0x24, KEY_4 },
-	{ 0x14, KEY_5 },
-	{ 0x34, KEY_6 },
-	{ 0x2c, KEY_7 },
-	{ 0x1c, KEY_8 },
-	{ 0x3c, KEY_9 },
-	{ 0x22, KEY_0 },
-
-	{ 0x20, KEY_TV },		/* TV/FM */
-	{ 0x10, KEY_CD },		/* CD */
-	{ 0x30, KEY_TEXT },		/* TELETEXT */
-	{ 0x00, KEY_POWER },		/* POWER */
-
-	{ 0x08, KEY_VIDEO },		/* VIDEO */
-	{ 0x04, KEY_AUDIO },		/* AUDIO */
-	{ 0x0c, KEY_ZOOM },		/* FULL SCREEN */
-
-	{ 0x12, KEY_SUBTITLE },		/* DISPLAY */
-	{ 0x32, KEY_REWIND },		/* LOOP	*/
-	{ 0x02, KEY_PRINT },		/* PREVIEW */
-
-	{ 0x2a, KEY_SEARCH },		/* AUTOSCAN */
-	{ 0x1a, KEY_SLEEP },		/* FREEZE */
-	{ 0x3a, KEY_CAMERA },		/* SNAPSHOT */
-	{ 0x0a, KEY_MUTE },		/* MUTE */
-
-	{ 0x26, KEY_RECORD },		/* RECORD */
-	{ 0x16, KEY_PAUSE },		/* PAUSE */
-	{ 0x36, KEY_STOP },		/* STOP */
-	{ 0x06, KEY_PLAY },		/* PLAY */
-
-	{ 0x2e, KEY_RED },		/* RED */
-	{ 0x21, KEY_GREEN },		/* GREEN */
-	{ 0x0e, KEY_YELLOW },		/* YELLOW */
-	{ 0x01, KEY_BLUE },		/* BLUE */
-
-	{ 0x1e, KEY_VOLUMEDOWN },	/* VOLUME- */
-	{ 0x3e, KEY_VOLUMEUP },		/* VOLUME+ */
-	{ 0x11, KEY_CHANNELDOWN },	/* CHANNEL/PAGE- */
-	{ 0x31, KEY_CHANNELUP }		/* CHANNEL/PAGE+ */
-};
-
-static struct rc_keymap avermedia_map = {
-	.map = {
-		.scan    = avermedia,
-		.size    = ARRAY_SIZE(avermedia),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_AVERMEDIA,
-	}
-};
-
-static int __init init_rc_map_avermedia(void)
-{
-	return ir_register_map(&avermedia_map);
-}
-
-static void __exit exit_rc_map_avermedia(void)
-{
-	ir_unregister_map(&avermedia_map);
-}
-
-module_init(init_rc_map_avermedia)
-module_exit(exit_rc_map_avermedia)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avertv-303.c b/drivers/media/IR/keymaps/rc-avertv-303.c
deleted file mode 100644
index 971c59d6f9d6..000000000000
--- a/drivers/media/IR/keymaps/rc-avertv-303.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* avertv-303.h - Keytable for avertv_303 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* AVERTV STUDIO 303 Remote */
-
-static struct ir_scancode avertv_303[] = {
-	{ 0x2a, KEY_1 },
-	{ 0x32, KEY_2 },
-	{ 0x3a, KEY_3 },
-	{ 0x4a, KEY_4 },
-	{ 0x52, KEY_5 },
-	{ 0x5a, KEY_6 },
-	{ 0x6a, KEY_7 },
-	{ 0x72, KEY_8 },
-	{ 0x7a, KEY_9 },
-	{ 0x0e, KEY_0 },
-
-	{ 0x02, KEY_POWER },
-	{ 0x22, KEY_VIDEO },
-	{ 0x42, KEY_AUDIO },
-	{ 0x62, KEY_ZOOM },
-	{ 0x0a, KEY_TV },
-	{ 0x12, KEY_CD },
-	{ 0x1a, KEY_TEXT },
-
-	{ 0x16, KEY_SUBTITLE },
-	{ 0x1e, KEY_REWIND },
-	{ 0x06, KEY_PRINT },
-
-	{ 0x2e, KEY_SEARCH },
-	{ 0x36, KEY_SLEEP },
-	{ 0x3e, KEY_SHUFFLE },
-	{ 0x26, KEY_MUTE },
-
-	{ 0x4e, KEY_RECORD },
-	{ 0x56, KEY_PAUSE },
-	{ 0x5e, KEY_STOP },
-	{ 0x46, KEY_PLAY },
-
-	{ 0x6e, KEY_RED },
-	{ 0x0b, KEY_GREEN },
-	{ 0x66, KEY_YELLOW },
-	{ 0x03, KEY_BLUE },
-
-	{ 0x76, KEY_LEFT },
-	{ 0x7e, KEY_RIGHT },
-	{ 0x13, KEY_DOWN },
-	{ 0x1b, KEY_UP },
-};
-
-static struct rc_keymap avertv_303_map = {
-	.map = {
-		.scan    = avertv_303,
-		.size    = ARRAY_SIZE(avertv_303),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_AVERTV_303,
-	}
-};
-
-static int __init init_rc_map_avertv_303(void)
-{
-	return ir_register_map(&avertv_303_map);
-}
-
-static void __exit exit_rc_map_avertv_303(void)
-{
-	ir_unregister_map(&avertv_303_map);
-}
-
-module_init(init_rc_map_avertv_303)
-module_exit(exit_rc_map_avertv_303)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c
deleted file mode 100644
index e0876147d471..000000000000
--- a/drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * TwinHan AzureWave AD-TU700(704J) remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode azurewave_ad_tu700[] = {
-	{ 0x0000, KEY_TAB },             /* Tab */
-	{ 0x0001, KEY_2 },
-	{ 0x0002, KEY_CHANNELDOWN },
-	{ 0x0003, KEY_1 },
-	{ 0x0004, KEY_MENU },            /* Record List */
-	{ 0x0005, KEY_CHANNELUP },
-	{ 0x0006, KEY_3 },
-	{ 0x0007, KEY_SLEEP },           /* Hibernate */
-	{ 0x0008, KEY_VIDEO },           /* A/V */
-	{ 0x0009, KEY_4 },
-	{ 0x000a, KEY_VOLUMEDOWN },
-	{ 0x000c, KEY_CANCEL },          /* Cancel */
-	{ 0x000d, KEY_7 },
-	{ 0x000e, KEY_AGAIN },           /* Recall */
-	{ 0x000f, KEY_TEXT },            /* Teletext */
-	{ 0x0010, KEY_MUTE },
-	{ 0x0011, KEY_RECORD },
-	{ 0x0012, KEY_FASTFORWARD },     /* FF >> */
-	{ 0x0013, KEY_BACK },            /* Back */
-	{ 0x0014, KEY_PLAY },
-	{ 0x0015, KEY_0 },
-	{ 0x0016, KEY_POWER2 },          /* [red power button] */
-	{ 0x0017, KEY_FAVORITES },       /* Favorite List */
-	{ 0x0018, KEY_RED },
-	{ 0x0019, KEY_8 },
-	{ 0x001a, KEY_STOP },
-	{ 0x001b, KEY_9 },
-	{ 0x001c, KEY_EPG },             /* Info/EPG */
-	{ 0x001d, KEY_5 },
-	{ 0x001e, KEY_VOLUMEUP },
-	{ 0x001f, KEY_6 },
-	{ 0x0040, KEY_REWIND },          /* FR << */
-	{ 0x0041, KEY_PREVIOUS },        /* Replay */
-	{ 0x0042, KEY_NEXT },            /* Skip */
-	{ 0x0043, KEY_SUBTITLE },        /* Subtitle / CC */
-	{ 0x0045, KEY_KPPLUS },          /* Zoom+ */
-	{ 0x0046, KEY_KPMINUS },         /* Zoom- */
-	{ 0x0047, KEY_NEW },             /* PIP */
-	{ 0x0048, KEY_INFO },            /* Preview */
-	{ 0x0049, KEY_MODE },            /* L/R */
-	{ 0x004a, KEY_CLEAR },           /* Clear */
-	{ 0x004b, KEY_UP },              /* up arrow */
-	{ 0x004c, KEY_PAUSE },
-	{ 0x004d, KEY_ZOOM },            /* Full Screen */
-	{ 0x004e, KEY_LEFT },            /* left arrow */
-	{ 0x004f, KEY_OK },              /* Enter / ok */
-	{ 0x0050, KEY_LANGUAGE },        /* SAP */
-	{ 0x0051, KEY_DOWN },            /* down arrow */
-	{ 0x0052, KEY_RIGHT },           /* right arrow */
-	{ 0x0053, KEY_GREEN },
-	{ 0x0054, KEY_CAMERA },          /* Capture */
-	{ 0x005e, KEY_YELLOW },
-	{ 0x005f, KEY_BLUE },
-};
-
-static struct rc_keymap azurewave_ad_tu700_map = {
-	.map = {
-		.scan    = azurewave_ad_tu700,
-		.size    = ARRAY_SIZE(azurewave_ad_tu700),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AZUREWAVE_AD_TU700,
-	}
-};
-
-static int __init init_rc_map_azurewave_ad_tu700(void)
-{
-	return ir_register_map(&azurewave_ad_tu700_map);
-}
-
-static void __exit exit_rc_map_azurewave_ad_tu700(void)
-{
-	ir_unregister_map(&azurewave_ad_tu700_map);
-}
-
-module_init(init_rc_map_azurewave_ad_tu700)
-module_exit(exit_rc_map_azurewave_ad_tu700)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-behold-columbus.c b/drivers/media/IR/keymaps/rc-behold-columbus.c
deleted file mode 100644
index 9f56c98fef5b..000000000000
--- a/drivers/media/IR/keymaps/rc-behold-columbus.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* behold-columbus.h - Keytable for behold_columbus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Beholder Intl. Ltd. 2008
- * Dmitry Belimov d.belimov@google.com
- * Keytable is used by BeholdTV Columbus
- * The "ascii-art picture" below (in comments, first row
- * is the keycode in hex, and subsequent row(s) shows
- * the button labels (several variants when appropriate)
- * helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode behold_columbus[] = {
-
-	/*  0x13   0x11   0x1C   0x12  *
-	 *  Mute  Source  TV/FM  Power *
-	 *                             */
-
-	{ 0x13, KEY_MUTE },
-	{ 0x11, KEY_PROPS },
-	{ 0x1C, KEY_TUNER },	/* KEY_TV/KEY_RADIO	*/
-	{ 0x12, KEY_POWER },
-
-	/*  0x01    0x02    0x03  0x0D    *
-	 *   1       2       3   Stereo   *
-	 *                        	  *
-	 *  0x04    0x05    0x06  0x19    *
-	 *   4       5       6   Snapshot *
-	 *                        	  *
-	 *  0x07    0x08    0x09  0x10    *
-	 *   7       8       9    Zoom 	  *
-	 *                                */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x0D, KEY_SETUP },	  /* Setup key */
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x19, KEY_CAMERA },	/* Snapshot key */
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x10, KEY_ZOOM },
-
-	/*  0x0A    0x00    0x0B       0x0C   *
-	 * RECALL    0    ChannelUp  VolumeUp *
-	 *                                    */
-	{ 0x0A, KEY_AGAIN },
-	{ 0x00, KEY_0 },
-	{ 0x0B, KEY_CHANNELUP },
-	{ 0x0C, KEY_VOLUMEUP },
-
-	/*   0x1B      0x1D      0x15        0x18     *
-	 * Timeshift  Record  ChannelDown  VolumeDown *
-	 *                                            */
-
-	{ 0x1B, KEY_TIME },
-	{ 0x1D, KEY_RECORD },
-	{ 0x15, KEY_CHANNELDOWN },
-	{ 0x18, KEY_VOLUMEDOWN },
-
-	/*   0x0E   0x1E     0x0F     0x1A  *
-	 *   Stop   Pause  Previouse  Next  *
-	 *                                  */
-
-	{ 0x0E, KEY_STOP },
-	{ 0x1E, KEY_PAUSE },
-	{ 0x0F, KEY_PREVIOUS },
-	{ 0x1A, KEY_NEXT },
-
-};
-
-static struct rc_keymap behold_columbus_map = {
-	.map = {
-		.scan    = behold_columbus,
-		.size    = ARRAY_SIZE(behold_columbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_BEHOLD_COLUMBUS,
-	}
-};
-
-static int __init init_rc_map_behold_columbus(void)
-{
-	return ir_register_map(&behold_columbus_map);
-}
-
-static void __exit exit_rc_map_behold_columbus(void)
-{
-	ir_unregister_map(&behold_columbus_map);
-}
-
-module_init(init_rc_map_behold_columbus)
-module_exit(exit_rc_map_behold_columbus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-behold.c b/drivers/media/IR/keymaps/rc-behold.c
deleted file mode 100644
index abc140b2098b..000000000000
--- a/drivers/media/IR/keymaps/rc-behold.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* behold.h - Keytable for behold Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Igor Kuznetsov <igk72@ya.ru>
- * Andrey J. Melnikov <temnota@kmv.ru>
- *
- * Keytable is used by BeholdTV 60x series, M6 series at
- * least, and probably other cards too.
- * The "ascii-art picture" below (in comments, first row
- * is the keycode in hex, and subsequent row(s) shows
- * the button labels (several variants when appropriate)
- * helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode behold[] = {
-
-	/*  0x1c            0x12  *
-	 *  TV/FM          POWER  *
-	 *                        */
-	{ 0x1c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
-	{ 0x12, KEY_POWER },
-
-	/*  0x01    0x02    0x03  *
-	 *   1       2       3    *
-	 *                        *
-	 *  0x04    0x05    0x06  *
-	 *   4       5       6    *
-	 *                        *
-	 *  0x07    0x08    0x09  *
-	 *   7       8       9    *
-	 *                        */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	/*  0x0a    0x00    0x17  *
-	 * RECALL    0      MODE  *
-	 *                        */
-	{ 0x0a, KEY_AGAIN },
-	{ 0x00, KEY_0 },
-	{ 0x17, KEY_MODE },
-
-	/*  0x14          0x10    *
-	 * ASPECT      FULLSCREEN *
-	 *                        */
-	{ 0x14, KEY_SCREEN },
-	{ 0x10, KEY_ZOOM },
-
-	/*          0x0b          *
-	 *           Up           *
-	 *                        *
-	 *  0x18    0x16    0x0c  *
-	 *  Left     Ok     Right *
-	 *                        *
-	 *         0x015          *
-	 *         Down           *
-	 *                        */
-	{ 0x0b, KEY_CHANNELUP },
-	{ 0x18, KEY_VOLUMEDOWN },
-	{ 0x16, KEY_OK },		/* XXX KEY_ENTER */
-	{ 0x0c, KEY_VOLUMEUP },
-	{ 0x15, KEY_CHANNELDOWN },
-
-	/*  0x11            0x0d  *
-	 *  MUTE            INFO  *
-	 *                        */
-	{ 0x11, KEY_MUTE },
-	{ 0x0d, KEY_INFO },
-
-	/*  0x0f    0x1b    0x1a  *
-	 * RECORD PLAY/PAUSE STOP *
-	 *                        *
-	 *  0x0e    0x1f    0x1e  *
-	 *TELETEXT  AUDIO  SOURCE *
-	 *           RED   YELLOW *
-	 *                        */
-	{ 0x0f, KEY_RECORD },
-	{ 0x1b, KEY_PLAYPAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x0e, KEY_TEXT },
-	{ 0x1f, KEY_RED },	/*XXX KEY_AUDIO	*/
-	{ 0x1e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
-
-	/*  0x1d   0x13     0x19  *
-	 * SLEEP  PREVIEW   DVB   *
-	 *         GREEN    BLUE  *
-	 *                        */
-	{ 0x1d, KEY_SLEEP },
-	{ 0x13, KEY_GREEN },
-	{ 0x19, KEY_BLUE },	/* XXX KEY_SAT	*/
-
-	/*  0x58           0x5c   *
-	 * FREEZE        SNAPSHOT *
-	 *                        */
-	{ 0x58, KEY_SLOW },
-	{ 0x5c, KEY_CAMERA },
-
-};
-
-static struct rc_keymap behold_map = {
-	.map = {
-		.scan    = behold,
-		.size    = ARRAY_SIZE(behold),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_BEHOLD,
-	}
-};
-
-static int __init init_rc_map_behold(void)
-{
-	return ir_register_map(&behold_map);
-}
-
-static void __exit exit_rc_map_behold(void)
-{
-	ir_unregister_map(&behold_map);
-}
-
-module_init(init_rc_map_behold)
-module_exit(exit_rc_map_behold)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-budget-ci-old.c b/drivers/media/IR/keymaps/rc-budget-ci-old.c
deleted file mode 100644
index 64c2ac913338..000000000000
--- a/drivers/media/IR/keymaps/rc-budget-ci-old.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* From reading the following remotes:
- * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
- * Hauppauge (from NOVA-CI-s box product)
- * This is a "middle of the road" approach, differences are noted
- */
-
-static struct ir_scancode budget_ci_old[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x0a, KEY_ENTER },
-	{ 0x0b, KEY_RED },
-	{ 0x0c, KEY_POWER },		/* RADIO on Hauppauge */
-	{ 0x0d, KEY_MUTE },
-	{ 0x0f, KEY_A },		/* TV on Hauppauge */
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x14, KEY_B },
-	{ 0x1c, KEY_UP },
-	{ 0x1d, KEY_DOWN },
-	{ 0x1e, KEY_OPTION },		/* RESERVED on Hauppauge */
-	{ 0x1f, KEY_BREAK },
-	{ 0x20, KEY_CHANNELUP },
-	{ 0x21, KEY_CHANNELDOWN },
-	{ 0x22, KEY_PREVIOUS },		/* Prev Ch on Zenith, SOURCE on Hauppauge */
-	{ 0x24, KEY_RESTART },
-	{ 0x25, KEY_OK },
-	{ 0x26, KEY_CYCLEWINDOWS },	/* MINIMIZE on Hauppauge */
-	{ 0x28, KEY_ENTER },		/* VCR mode on Zenith */
-	{ 0x29, KEY_PAUSE },
-	{ 0x2b, KEY_RIGHT },
-	{ 0x2c, KEY_LEFT },
-	{ 0x2e, KEY_MENU },		/* FULL SCREEN on Hauppauge */
-	{ 0x30, KEY_SLOW },
-	{ 0x31, KEY_PREVIOUS },		/* VCR mode on Zenith */
-	{ 0x32, KEY_REWIND },
-	{ 0x34, KEY_FASTFORWARD },
-	{ 0x35, KEY_PLAY },
-	{ 0x36, KEY_STOP },
-	{ 0x37, KEY_RECORD },
-	{ 0x38, KEY_TUNER },		/* TV/VCR on Zenith */
-	{ 0x3a, KEY_C },
-	{ 0x3c, KEY_EXIT },
-	{ 0x3d, KEY_POWER2 },
-	{ 0x3e, KEY_TUNER },
-};
-
-static struct rc_keymap budget_ci_old_map = {
-	.map = {
-		.scan    = budget_ci_old,
-		.size    = ARRAY_SIZE(budget_ci_old),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_BUDGET_CI_OLD,
-	}
-};
-
-static int __init init_rc_map_budget_ci_old(void)
-{
-	return ir_register_map(&budget_ci_old_map);
-}
-
-static void __exit exit_rc_map_budget_ci_old(void)
-{
-	ir_unregister_map(&budget_ci_old_map);
-}
-
-module_init(init_rc_map_budget_ci_old)
-module_exit(exit_rc_map_budget_ci_old)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-cinergy-1400.c b/drivers/media/IR/keymaps/rc-cinergy-1400.c
deleted file mode 100644
index 074f2c2c2c61..000000000000
--- a/drivers/media/IR/keymaps/rc-cinergy-1400.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Cinergy 1400 DVB-T */
-
-static struct ir_scancode cinergy_1400[] = {
-	{ 0x01, KEY_POWER },
-	{ 0x02, KEY_1 },
-	{ 0x03, KEY_2 },
-	{ 0x04, KEY_3 },
-	{ 0x05, KEY_4 },
-	{ 0x06, KEY_5 },
-	{ 0x07, KEY_6 },
-	{ 0x08, KEY_7 },
-	{ 0x09, KEY_8 },
-	{ 0x0a, KEY_9 },
-	{ 0x0c, KEY_0 },
-
-	{ 0x0b, KEY_VIDEO },
-	{ 0x0d, KEY_REFRESH },
-	{ 0x0e, KEY_SELECT },
-	{ 0x0f, KEY_EPG },
-	{ 0x10, KEY_UP },
-	{ 0x11, KEY_LEFT },
-	{ 0x12, KEY_OK },
-	{ 0x13, KEY_RIGHT },
-	{ 0x14, KEY_DOWN },
-	{ 0x15, KEY_TEXT },
-	{ 0x16, KEY_INFO },
-
-	{ 0x17, KEY_RED },
-	{ 0x18, KEY_GREEN },
-	{ 0x19, KEY_YELLOW },
-	{ 0x1a, KEY_BLUE },
-
-	{ 0x1b, KEY_CHANNELUP },
-	{ 0x1c, KEY_VOLUMEUP },
-	{ 0x1d, KEY_MUTE },
-	{ 0x1e, KEY_VOLUMEDOWN },
-	{ 0x1f, KEY_CHANNELDOWN },
-
-	{ 0x40, KEY_PAUSE },
-	{ 0x4c, KEY_PLAY },
-	{ 0x58, KEY_RECORD },
-	{ 0x54, KEY_PREVIOUS },
-	{ 0x48, KEY_STOP },
-	{ 0x5c, KEY_NEXT },
-};
-
-static struct rc_keymap cinergy_1400_map = {
-	.map = {
-		.scan    = cinergy_1400,
-		.size    = ARRAY_SIZE(cinergy_1400),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_CINERGY_1400,
-	}
-};
-
-static int __init init_rc_map_cinergy_1400(void)
-{
-	return ir_register_map(&cinergy_1400_map);
-}
-
-static void __exit exit_rc_map_cinergy_1400(void)
-{
-	ir_unregister_map(&cinergy_1400_map);
-}
-
-module_init(init_rc_map_cinergy_1400)
-module_exit(exit_rc_map_cinergy_1400)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-cinergy.c b/drivers/media/IR/keymaps/rc-cinergy.c
deleted file mode 100644
index cf84c3dba742..000000000000
--- a/drivers/media/IR/keymaps/rc-cinergy.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* cinergy.h - Keytable for cinergy Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode cinergy[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0a, KEY_POWER },
-	{ 0x0b, KEY_PROG1 },		/* app */
-	{ 0x0c, KEY_ZOOM },		/* zoom/fullscreen */
-	{ 0x0d, KEY_CHANNELUP },	/* channel */
-	{ 0x0e, KEY_CHANNELDOWN },	/* channel- */
-	{ 0x0f, KEY_VOLUMEUP },
-	{ 0x10, KEY_VOLUMEDOWN },
-	{ 0x11, KEY_TUNER },		/* AV */
-	{ 0x12, KEY_NUMLOCK },		/* -/-- */
-	{ 0x13, KEY_AUDIO },		/* audio */
-	{ 0x14, KEY_MUTE },
-	{ 0x15, KEY_UP },
-	{ 0x16, KEY_DOWN },
-	{ 0x17, KEY_LEFT },
-	{ 0x18, KEY_RIGHT },
-	{ 0x19, BTN_LEFT, },
-	{ 0x1a, BTN_RIGHT, },
-	{ 0x1b, KEY_WWW },		/* text */
-	{ 0x1c, KEY_REWIND },
-	{ 0x1d, KEY_FORWARD },
-	{ 0x1e, KEY_RECORD },
-	{ 0x1f, KEY_PLAY },
-	{ 0x20, KEY_PREVIOUSSONG },
-	{ 0x21, KEY_NEXTSONG },
-	{ 0x22, KEY_PAUSE },
-	{ 0x23, KEY_STOP },
-};
-
-static struct rc_keymap cinergy_map = {
-	.map = {
-		.scan    = cinergy,
-		.size    = ARRAY_SIZE(cinergy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_CINERGY,
-	}
-};
-
-static int __init init_rc_map_cinergy(void)
-{
-	return ir_register_map(&cinergy_map);
-}
-
-static void __exit exit_rc_map_cinergy(void)
-{
-	ir_unregister_map(&cinergy_map);
-}
-
-module_init(init_rc_map_cinergy)
-module_exit(exit_rc_map_cinergy)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dib0700-nec.c b/drivers/media/IR/keymaps/rc-dib0700-nec.c
deleted file mode 100644
index ae1832038fbe..000000000000
--- a/drivers/media/IR/keymaps/rc-dib0700-nec.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* rc-dvb0700-big.c - Keytable for devices in dvb0700
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * TODO: This table is a real mess, as it merges RC codes from several
- * devices into a big table. It also has both RC-5 and NEC codes inside.
- * It should be broken into small tables, and the protocols should properly
- * be indentificated.
- *
- * The table were imported from dib0700_devices.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode dib0700_nec_table[] = {
-	/* Key codes for the Pixelview SBTVD remote */
-	{ 0x8613, KEY_MUTE },
-	{ 0x8612, KEY_POWER },
-	{ 0x8601, KEY_1 },
-	{ 0x8602, KEY_2 },
-	{ 0x8603, KEY_3 },
-	{ 0x8604, KEY_4 },
-	{ 0x8605, KEY_5 },
-	{ 0x8606, KEY_6 },
-	{ 0x8607, KEY_7 },
-	{ 0x8608, KEY_8 },
-	{ 0x8609, KEY_9 },
-	{ 0x8600, KEY_0 },
-	{ 0x860d, KEY_CHANNELUP },
-	{ 0x8619, KEY_CHANNELDOWN },
-	{ 0x8610, KEY_VOLUMEUP },
-	{ 0x860c, KEY_VOLUMEDOWN },
-
-	{ 0x860a, KEY_CAMERA },
-	{ 0x860b, KEY_ZOOM },
-	{ 0x861b, KEY_BACKSPACE },
-	{ 0x8615, KEY_ENTER },
-
-	{ 0x861d, KEY_UP },
-	{ 0x861e, KEY_DOWN },
-	{ 0x860e, KEY_LEFT },
-	{ 0x860f, KEY_RIGHT },
-
-	{ 0x8618, KEY_RECORD },
-	{ 0x861a, KEY_STOP },
-
-	/* Key codes for the EvolutePC TVWay+ remote */
-	{ 0x7a00, KEY_MENU },
-	{ 0x7a01, KEY_RECORD },
-	{ 0x7a02, KEY_PLAY },
-	{ 0x7a03, KEY_STOP },
-	{ 0x7a10, KEY_CHANNELUP },
-	{ 0x7a11, KEY_CHANNELDOWN },
-	{ 0x7a12, KEY_VOLUMEUP },
-	{ 0x7a13, KEY_VOLUMEDOWN },
-	{ 0x7a40, KEY_POWER },
-	{ 0x7a41, KEY_MUTE },
-
-	/* Key codes for the Elgato EyeTV Diversity silver remote */
-	{ 0x4501, KEY_POWER },
-	{ 0x4502, KEY_MUTE },
-	{ 0x4503, KEY_1 },
-	{ 0x4504, KEY_2 },
-	{ 0x4505, KEY_3 },
-	{ 0x4506, KEY_4 },
-	{ 0x4507, KEY_5 },
-	{ 0x4508, KEY_6 },
-	{ 0x4509, KEY_7 },
-	{ 0x450a, KEY_8 },
-	{ 0x450b, KEY_9 },
-	{ 0x450c, KEY_LAST },
-	{ 0x450d, KEY_0 },
-	{ 0x450e, KEY_ENTER },
-	{ 0x450f, KEY_RED },
-	{ 0x4510, KEY_CHANNELUP },
-	{ 0x4511, KEY_GREEN },
-	{ 0x4512, KEY_VOLUMEDOWN },
-	{ 0x4513, KEY_OK },
-	{ 0x4514, KEY_VOLUMEUP },
-	{ 0x4515, KEY_YELLOW },
-	{ 0x4516, KEY_CHANNELDOWN },
-	{ 0x4517, KEY_BLUE },
-	{ 0x4518, KEY_LEFT }, /* Skip backwards */
-	{ 0x4519, KEY_PLAYPAUSE },
-	{ 0x451a, KEY_RIGHT }, /* Skip forward */
-	{ 0x451b, KEY_REWIND },
-	{ 0x451c, KEY_L }, /* Live */
-	{ 0x451d, KEY_FASTFORWARD },
-	{ 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
-	{ 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
-	{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
-	{ 0x4541, KEY_SCREEN }, /*  Full screen toggle, 'Hold' for Teletext */
-	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
-};
-
-static struct rc_keymap dib0700_nec_map = {
-	.map = {
-		.scan    = dib0700_nec_table,
-		.size    = ARRAY_SIZE(dib0700_nec_table),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_DIB0700_NEC_TABLE,
-	}
-};
-
-static int __init init_rc_map(void)
-{
-	return ir_register_map(&dib0700_nec_map);
-}
-
-static void __exit exit_rc_map(void)
-{
-	ir_unregister_map(&dib0700_nec_map);
-}
-
-module_init(init_rc_map)
-module_exit(exit_rc_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dib0700-rc5.c b/drivers/media/IR/keymaps/rc-dib0700-rc5.c
deleted file mode 100644
index 4a4797cfd77d..000000000000
--- a/drivers/media/IR/keymaps/rc-dib0700-rc5.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/* rc-dvb0700-big.c - Keytable for devices in dvb0700
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * TODO: This table is a real mess, as it merges RC codes from several
- * devices into a big table. It also has both RC-5 and NEC codes inside.
- * It should be broken into small tables, and the protocols should properly
- * be indentificated.
- *
- * The table were imported from dib0700_devices.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode dib0700_rc5_table[] = {
-	/* Key codes for the tiny Pinnacle remote*/
-	{ 0x0700, KEY_MUTE },
-	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
-	{ 0x0739, KEY_POWER },
-	{ 0x0703, KEY_VOLUMEUP },
-	{ 0x0709, KEY_VOLUMEDOWN },
-	{ 0x0706, KEY_CHANNELUP },
-	{ 0x070c, KEY_CHANNELDOWN },
-	{ 0x070f, KEY_1 },
-	{ 0x0715, KEY_2 },
-	{ 0x0710, KEY_3 },
-	{ 0x0718, KEY_4 },
-	{ 0x071b, KEY_5 },
-	{ 0x071e, KEY_6 },
-	{ 0x0711, KEY_7 },
-	{ 0x0721, KEY_8 },
-	{ 0x0712, KEY_9 },
-	{ 0x0727, KEY_0 },
-	{ 0x0724, KEY_SCREEN }, /* 'Square' key */
-	{ 0x072a, KEY_TEXT },   /* 'T' key */
-	{ 0x072d, KEY_REWIND },
-	{ 0x0730, KEY_PLAY },
-	{ 0x0733, KEY_FASTFORWARD },
-	{ 0x0736, KEY_RECORD },
-	{ 0x073c, KEY_STOP },
-	{ 0x073f, KEY_CANCEL }, /* '?' key */
-
-	/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
-	{ 0xeb01, KEY_POWER },
-	{ 0xeb02, KEY_1 },
-	{ 0xeb03, KEY_2 },
-	{ 0xeb04, KEY_3 },
-	{ 0xeb05, KEY_4 },
-	{ 0xeb06, KEY_5 },
-	{ 0xeb07, KEY_6 },
-	{ 0xeb08, KEY_7 },
-	{ 0xeb09, KEY_8 },
-	{ 0xeb0a, KEY_9 },
-	{ 0xeb0b, KEY_VIDEO },
-	{ 0xeb0c, KEY_0 },
-	{ 0xeb0d, KEY_REFRESH },
-	{ 0xeb0f, KEY_EPG },
-	{ 0xeb10, KEY_UP },
-	{ 0xeb11, KEY_LEFT },
-	{ 0xeb12, KEY_OK },
-	{ 0xeb13, KEY_RIGHT },
-	{ 0xeb14, KEY_DOWN },
-	{ 0xeb16, KEY_INFO },
-	{ 0xeb17, KEY_RED },
-	{ 0xeb18, KEY_GREEN },
-	{ 0xeb19, KEY_YELLOW },
-	{ 0xeb1a, KEY_BLUE },
-	{ 0xeb1b, KEY_CHANNELUP },
-	{ 0xeb1c, KEY_VOLUMEUP },
-	{ 0xeb1d, KEY_MUTE },
-	{ 0xeb1e, KEY_VOLUMEDOWN },
-	{ 0xeb1f, KEY_CHANNELDOWN },
-	{ 0xeb40, KEY_PAUSE },
-	{ 0xeb41, KEY_HOME },
-	{ 0xeb42, KEY_MENU }, /* DVD Menu */
-	{ 0xeb43, KEY_SUBTITLE },
-	{ 0xeb44, KEY_TEXT }, /* Teletext */
-	{ 0xeb45, KEY_DELETE },
-	{ 0xeb46, KEY_TV },
-	{ 0xeb47, KEY_DVD },
-	{ 0xeb48, KEY_STOP },
-	{ 0xeb49, KEY_VIDEO },
-	{ 0xeb4a, KEY_AUDIO }, /* Music */
-	{ 0xeb4b, KEY_SCREEN }, /* Pic */
-	{ 0xeb4c, KEY_PLAY },
-	{ 0xeb4d, KEY_BACK },
-	{ 0xeb4e, KEY_REWIND },
-	{ 0xeb4f, KEY_FASTFORWARD },
-	{ 0xeb54, KEY_PREVIOUS },
-	{ 0xeb58, KEY_RECORD },
-	{ 0xeb5c, KEY_NEXT },
-
-	/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
-	{ 0x1e00, KEY_0 },
-	{ 0x1e01, KEY_1 },
-	{ 0x1e02, KEY_2 },
-	{ 0x1e03, KEY_3 },
-	{ 0x1e04, KEY_4 },
-	{ 0x1e05, KEY_5 },
-	{ 0x1e06, KEY_6 },
-	{ 0x1e07, KEY_7 },
-	{ 0x1e08, KEY_8 },
-	{ 0x1e09, KEY_9 },
-	{ 0x1e0a, KEY_KPASTERISK },
-	{ 0x1e0b, KEY_RED },
-	{ 0x1e0c, KEY_RADIO },
-	{ 0x1e0d, KEY_MENU },
-	{ 0x1e0e, KEY_GRAVE }, /* # */
-	{ 0x1e0f, KEY_MUTE },
-	{ 0x1e10, KEY_VOLUMEUP },
-	{ 0x1e11, KEY_VOLUMEDOWN },
-	{ 0x1e12, KEY_CHANNEL },
-	{ 0x1e14, KEY_UP },
-	{ 0x1e15, KEY_DOWN },
-	{ 0x1e16, KEY_LEFT },
-	{ 0x1e17, KEY_RIGHT },
-	{ 0x1e18, KEY_VIDEO },
-	{ 0x1e19, KEY_AUDIO },
-	{ 0x1e1a, KEY_MEDIA },
-	{ 0x1e1b, KEY_EPG },
-	{ 0x1e1c, KEY_TV },
-	{ 0x1e1e, KEY_NEXT },
-	{ 0x1e1f, KEY_BACK },
-	{ 0x1e20, KEY_CHANNELUP },
-	{ 0x1e21, KEY_CHANNELDOWN },
-	{ 0x1e24, KEY_LAST }, /* Skip backwards */
-	{ 0x1e25, KEY_OK },
-	{ 0x1e29, KEY_BLUE},
-	{ 0x1e2e, KEY_GREEN },
-	{ 0x1e30, KEY_PAUSE },
-	{ 0x1e32, KEY_REWIND },
-	{ 0x1e34, KEY_FASTFORWARD },
-	{ 0x1e35, KEY_PLAY },
-	{ 0x1e36, KEY_STOP },
-	{ 0x1e37, KEY_RECORD },
-	{ 0x1e38, KEY_YELLOW },
-	{ 0x1e3b, KEY_GOTO },
-	{ 0x1e3d, KEY_POWER },
-
-	/* Key codes for the Leadtek Winfast DTV Dongle */
-	{ 0x0042, KEY_POWER },
-	{ 0x077c, KEY_TUNER },
-	{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
-	{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
-	{ 0x0f71, KEY_DOT }, /* frequency */
-	{ 0x0743, KEY_0 },
-	{ 0x0c41, KEY_1 },
-	{ 0x0443, KEY_2 },
-	{ 0x0b7f, KEY_3 },
-	{ 0x0e41, KEY_4 },
-	{ 0x0643, KEY_5 },
-	{ 0x097f, KEY_6 },
-	{ 0x0d7e, KEY_7 },
-	{ 0x057c, KEY_8 },
-	{ 0x0a40, KEY_9 },
-	{ 0x0e4e, KEY_CLEAR },
-	{ 0x047c, KEY_CHANNEL }, /* show channel number */
-	{ 0x0f41, KEY_LAST }, /* recall */
-	{ 0x0342, KEY_MUTE },
-	{ 0x064c, KEY_RESERVED }, /* PIP button*/
-	{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
-	{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
-	{ 0x0b70, KEY_RECORD },
-	{ 0x037d, KEY_VOLUMEUP },
-	{ 0x017d, KEY_VOLUMEDOWN },
-	{ 0x0242, KEY_CHANNELUP },
-	{ 0x007d, KEY_CHANNELDOWN },
-
-	/* Key codes for Nova-TD "credit card" remote control. */
-	{ 0x1d00, KEY_0 },
-	{ 0x1d01, KEY_1 },
-	{ 0x1d02, KEY_2 },
-	{ 0x1d03, KEY_3 },
-	{ 0x1d04, KEY_4 },
-	{ 0x1d05, KEY_5 },
-	{ 0x1d06, KEY_6 },
-	{ 0x1d07, KEY_7 },
-	{ 0x1d08, KEY_8 },
-	{ 0x1d09, KEY_9 },
-	{ 0x1d0a, KEY_TEXT },
-	{ 0x1d0d, KEY_MENU },
-	{ 0x1d0f, KEY_MUTE },
-	{ 0x1d10, KEY_VOLUMEUP },
-	{ 0x1d11, KEY_VOLUMEDOWN },
-	{ 0x1d12, KEY_CHANNEL },
-	{ 0x1d14, KEY_UP },
-	{ 0x1d15, KEY_DOWN },
-	{ 0x1d16, KEY_LEFT },
-	{ 0x1d17, KEY_RIGHT },
-	{ 0x1d1c, KEY_TV },
-	{ 0x1d1e, KEY_NEXT },
-	{ 0x1d1f, KEY_BACK },
-	{ 0x1d20, KEY_CHANNELUP },
-	{ 0x1d21, KEY_CHANNELDOWN },
-	{ 0x1d24, KEY_LAST },
-	{ 0x1d25, KEY_OK },
-	{ 0x1d30, KEY_PAUSE },
-	{ 0x1d32, KEY_REWIND },
-	{ 0x1d34, KEY_FASTFORWARD },
-	{ 0x1d35, KEY_PLAY },
-	{ 0x1d36, KEY_STOP },
-	{ 0x1d37, KEY_RECORD },
-	{ 0x1d3b, KEY_GOTO },
-	{ 0x1d3d, KEY_POWER },
-};
-
-static struct rc_keymap dib0700_rc5_map = {
-	.map = {
-		.scan    = dib0700_rc5_table,
-		.size    = ARRAY_SIZE(dib0700_rc5_table),
-		.ir_type = IR_TYPE_RC5,
-		.name    = RC_MAP_DIB0700_RC5_TABLE,
-	}
-};
-
-static int __init init_rc_map(void)
-{
-	return ir_register_map(&dib0700_rc5_map);
-}
-
-static void __exit exit_rc_map(void)
-{
-	ir_unregister_map(&dib0700_rc5_map);
-}
-
-module_init(init_rc_map)
-module_exit(exit_rc_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c
deleted file mode 100644
index 63e469e2dd21..000000000000
--- a/drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * DigitalNow TinyTwin remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode digitalnow_tinytwin[] = {
-	{ 0x0000, KEY_MUTE },            /* [symbol speaker] */
-	{ 0x0001, KEY_VOLUMEUP },
-	{ 0x0002, KEY_POWER2 },          /* TV [power button] */
-	{ 0x0003, KEY_2 },
-	{ 0x0004, KEY_3 },
-	{ 0x0005, KEY_4 },
-	{ 0x0006, KEY_6 },
-	{ 0x0007, KEY_7 },
-	{ 0x0008, KEY_8 },
-	{ 0x0009, KEY_NUMERIC_STAR },    /* [*] */
-	{ 0x000a, KEY_0 },
-	{ 0x000b, KEY_NUMERIC_POUND },   /* [#] */
-	{ 0x000c, KEY_RIGHT },           /* [right arrow] */
-	{ 0x000d, KEY_HOMEPAGE },        /* [symbol home] Start */
-	{ 0x000e, KEY_RED },             /* [red] Videos */
-	{ 0x0010, KEY_POWER },           /* PC [power button] */
-	{ 0x0011, KEY_YELLOW },          /* [yellow] Pictures */
-	{ 0x0012, KEY_DOWN },            /* [down arrow] */
-	{ 0x0013, KEY_GREEN },           /* [green] Music */
-	{ 0x0014, KEY_CYCLEWINDOWS },    /* BACK */
-	{ 0x0015, KEY_FAVORITES },       /* MORE */
-	{ 0x0016, KEY_UP },              /* [up arrow] */
-	{ 0x0017, KEY_LEFT },            /* [left arrow] */
-	{ 0x0018, KEY_OK },              /* OK */
-	{ 0x0019, KEY_BLUE },            /* [blue] MyTV */
-	{ 0x001a, KEY_REWIND },          /* REW [<<] */
-	{ 0x001b, KEY_PLAY },            /* PLAY */
-	{ 0x001c, KEY_5 },
-	{ 0x001d, KEY_9 },
-	{ 0x001e, KEY_VOLUMEDOWN },
-	{ 0x001f, KEY_1 },
-	{ 0x0040, KEY_STOP },            /* STOP */
-	{ 0x0042, KEY_PAUSE },           /* PAUSE */
-	{ 0x0043, KEY_SCREEN },          /* Aspect */
-	{ 0x0044, KEY_FORWARD },         /* FWD [>>] */
-	{ 0x0045, KEY_NEXT },            /* SKIP */
-	{ 0x0048, KEY_RECORD },          /* RECORD */
-	{ 0x0049, KEY_VIDEO },           /* RTV */
-	{ 0x004a, KEY_EPG },             /* Guide */
-	{ 0x004b, KEY_CHANNELUP },
-	{ 0x004c, KEY_HELP },            /* Help */
-	{ 0x004d, KEY_RADIO },           /* Radio */
-	{ 0x004f, KEY_CHANNELDOWN },
-	{ 0x0050, KEY_DVD },             /* DVD */
-	{ 0x0051, KEY_AUDIO },           /* Audio */
-	{ 0x0052, KEY_TITLE },           /* Title */
-	{ 0x0053, KEY_NEW },             /* [symbol PIP?] */
-	{ 0x0057, KEY_MENU },            /* Mouse */
-	{ 0x005a, KEY_PREVIOUS },        /* REPLAY */
-};
-
-static struct rc_keymap digitalnow_tinytwin_map = {
-	.map = {
-		.scan    = digitalnow_tinytwin,
-		.size    = ARRAY_SIZE(digitalnow_tinytwin),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_DIGITALNOW_TINYTWIN,
-	}
-};
-
-static int __init init_rc_map_digitalnow_tinytwin(void)
-{
-	return ir_register_map(&digitalnow_tinytwin_map);
-}
-
-static void __exit exit_rc_map_digitalnow_tinytwin(void)
-{
-	ir_unregister_map(&digitalnow_tinytwin_map);
-}
-
-module_init(init_rc_map_digitalnow_tinytwin)
-module_exit(exit_rc_map_digitalnow_tinytwin)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-digittrade.c b/drivers/media/IR/keymaps/rc-digittrade.c
deleted file mode 100644
index 5dece78e19c5..000000000000
--- a/drivers/media/IR/keymaps/rc-digittrade.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Digittrade DVB-T USB Stick remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Digittrade DVB-T USB Stick remote controller. */
-/* Imported from af9015.h.
-   Initial keytable was from Alain Kalker <miki@dds.nl> */
-
-/* Digittrade DVB-T USB Stick */
-static struct ir_scancode digittrade[] = {
-	{ 0x0000, KEY_9 },
-	{ 0x0001, KEY_EPG },             /* EPG */
-	{ 0x0002, KEY_VOLUMEDOWN },      /* Vol Dn */
-	{ 0x0003, KEY_TEXT },            /* TELETEXT */
-	{ 0x0004, KEY_8 },
-	{ 0x0005, KEY_MUTE },            /* MUTE */
-	{ 0x0006, KEY_POWER2 },          /* POWER */
-	{ 0x0009, KEY_ZOOM },            /* FULLSCREEN */
-	{ 0x000a, KEY_RECORD },          /* RECORD */
-	{ 0x000d, KEY_SUBTITLE },        /* SUBTITLE */
-	{ 0x000e, KEY_STOP },            /* STOP */
-	{ 0x0010, KEY_OK },              /* RETURN */
-	{ 0x0011, KEY_2 },
-	{ 0x0012, KEY_4 },
-	{ 0x0015, KEY_3 },
-	{ 0x0016, KEY_5 },
-	{ 0x0017, KEY_CHANNELDOWN },     /* Ch Dn */
-	{ 0x0019, KEY_CHANNELUP },       /* CH Up */
-	{ 0x001a, KEY_PAUSE },           /* PAUSE */
-	{ 0x001b, KEY_1 },
-	{ 0x001d, KEY_AUDIO },           /* DUAL SOUND */
-	{ 0x001e, KEY_PLAY },            /* PLAY */
-	{ 0x001f, KEY_CAMERA },          /* SNAPSHOT */
-	{ 0x0040, KEY_VOLUMEUP },        /* Vol Up */
-	{ 0x0048, KEY_7 },
-	{ 0x004c, KEY_6 },
-	{ 0x004d, KEY_PLAYPAUSE },       /* TIMESHIFT */
-	{ 0x0054, KEY_0 },
-};
-
-static struct rc_keymap digittrade_map = {
-	.map = {
-		.scan    = digittrade,
-		.size    = ARRAY_SIZE(digittrade),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_DIGITTRADE,
-	}
-};
-
-static int __init init_rc_map_digittrade(void)
-{
-	return ir_register_map(&digittrade_map);
-}
-
-static void __exit exit_rc_map_digittrade(void)
-{
-	ir_unregister_map(&digittrade_map);
-}
-
-module_init(init_rc_map_digittrade)
-module_exit(exit_rc_map_digittrade)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-dm1105-nec.c b/drivers/media/IR/keymaps/rc-dm1105-nec.c
deleted file mode 100644
index 90684d0efea3..000000000000
--- a/drivers/media/IR/keymaps/rc-dm1105-nec.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DVBWorld remotes
-   Igor M. Liplianin <liplianin@me.by>
- */
-
-static struct ir_scancode dm1105_nec[] = {
-	{ 0x0a, KEY_POWER2},		/* power */
-	{ 0x0c, KEY_MUTE},		/* mute */
-	{ 0x11, KEY_1},
-	{ 0x12, KEY_2},
-	{ 0x13, KEY_3},
-	{ 0x14, KEY_4},
-	{ 0x15, KEY_5},
-	{ 0x16, KEY_6},
-	{ 0x17, KEY_7},
-	{ 0x18, KEY_8},
-	{ 0x19, KEY_9},
-	{ 0x10, KEY_0},
-	{ 0x1c, KEY_CHANNELUP},		/* ch+ */
-	{ 0x0f, KEY_CHANNELDOWN},	/* ch- */
-	{ 0x1a, KEY_VOLUMEUP},		/* vol+ */
-	{ 0x0e, KEY_VOLUMEDOWN},	/* vol- */
-	{ 0x04, KEY_RECORD},		/* rec */
-	{ 0x09, KEY_CHANNEL},		/* fav */
-	{ 0x08, KEY_BACKSPACE},		/* rewind */
-	{ 0x07, KEY_FASTFORWARD},	/* fast */
-	{ 0x0b, KEY_PAUSE},		/* pause */
-	{ 0x02, KEY_ESC},		/* cancel */
-	{ 0x03, KEY_TAB},		/* tab */
-	{ 0x00, KEY_UP},		/* up */
-	{ 0x1f, KEY_ENTER},		/* ok */
-	{ 0x01, KEY_DOWN},		/* down */
-	{ 0x05, KEY_RECORD},		/* cap */
-	{ 0x06, KEY_STOP},		/* stop */
-	{ 0x40, KEY_ZOOM},		/* full */
-	{ 0x1e, KEY_TV},		/* tvmode */
-	{ 0x1b, KEY_B},			/* recall */
-};
-
-static struct rc_keymap dm1105_nec_map = {
-	.map = {
-		.scan    = dm1105_nec,
-		.size    = ARRAY_SIZE(dm1105_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_DM1105_NEC,
-	}
-};
-
-static int __init init_rc_map_dm1105_nec(void)
-{
-	return ir_register_map(&dm1105_nec_map);
-}
-
-static void __exit exit_rc_map_dm1105_nec(void)
-{
-	ir_unregister_map(&dm1105_nec_map);
-}
-
-module_init(init_rc_map_dm1105_nec)
-module_exit(exit_rc_map_dm1105_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c
deleted file mode 100644
index 8a4027af964a..000000000000
--- a/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DigitalNow DNTV Live DVB-T Remote */
-
-static struct ir_scancode dntv_live_dvb_t[] = {
-	{ 0x00, KEY_ESC },		/* 'go up a level?' */
-	/* Keys 0 to 9 */
-	{ 0x0a, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0b, KEY_TUNER },		/* tv/fm */
-	{ 0x0c, KEY_SEARCH },		/* scan */
-	{ 0x0d, KEY_STOP },
-	{ 0x0e, KEY_PAUSE },
-	{ 0x0f, KEY_LIST },		/* source */
-
-	{ 0x10, KEY_MUTE },
-	{ 0x11, KEY_REWIND },		/* backward << */
-	{ 0x12, KEY_POWER },
-	{ 0x13, KEY_CAMERA },		/* snap */
-	{ 0x14, KEY_AUDIO },		/* stereo */
-	{ 0x15, KEY_CLEAR },		/* reset */
-	{ 0x16, KEY_PLAY },
-	{ 0x17, KEY_ENTER },
-	{ 0x18, KEY_ZOOM },		/* full screen */
-	{ 0x19, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x1a, KEY_CHANNELUP },
-	{ 0x1b, KEY_VOLUMEUP },
-	{ 0x1c, KEY_INFO },		/* preview */
-	{ 0x1d, KEY_RECORD },		/* record */
-	{ 0x1e, KEY_CHANNELDOWN },
-	{ 0x1f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap dntv_live_dvb_t_map = {
-	.map = {
-		.scan    = dntv_live_dvb_t,
-		.size    = ARRAY_SIZE(dntv_live_dvb_t),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_DNTV_LIVE_DVB_T,
-	}
-};
-
-static int __init init_rc_map_dntv_live_dvb_t(void)
-{
-	return ir_register_map(&dntv_live_dvb_t_map);
-}
-
-static void __exit exit_rc_map_dntv_live_dvb_t(void)
-{
-	ir_unregister_map(&dntv_live_dvb_t_map);
-}
-
-module_init(init_rc_map_dntv_live_dvb_t)
-module_exit(exit_rc_map_dntv_live_dvb_t)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c
deleted file mode 100644
index 6f4d60764d59..000000000000
--- a/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DigitalNow DNTV Live! DVB-T Pro Remote */
-
-static struct ir_scancode dntv_live_dvbt_pro[] = {
-	{ 0x16, KEY_POWER },
-	{ 0x5b, KEY_HOME },
-
-	{ 0x55, KEY_TV },		/* live tv */
-	{ 0x58, KEY_TUNER },		/* digital Radio */
-	{ 0x5a, KEY_RADIO },		/* FM radio */
-	{ 0x59, KEY_DVD },		/* dvd menu */
-	{ 0x03, KEY_1 },
-	{ 0x01, KEY_2 },
-	{ 0x06, KEY_3 },
-	{ 0x09, KEY_4 },
-	{ 0x1d, KEY_5 },
-	{ 0x1f, KEY_6 },
-	{ 0x0d, KEY_7 },
-	{ 0x19, KEY_8 },
-	{ 0x1b, KEY_9 },
-	{ 0x0c, KEY_CANCEL },
-	{ 0x15, KEY_0 },
-	{ 0x4a, KEY_CLEAR },
-	{ 0x13, KEY_BACK },
-	{ 0x00, KEY_TAB },
-	{ 0x4b, KEY_UP },
-	{ 0x4e, KEY_LEFT },
-	{ 0x4f, KEY_OK },
-	{ 0x52, KEY_RIGHT },
-	{ 0x51, KEY_DOWN },
-	{ 0x1e, KEY_VOLUMEUP },
-	{ 0x0a, KEY_VOLUMEDOWN },
-	{ 0x02, KEY_CHANNELDOWN },
-	{ 0x05, KEY_CHANNELUP },
-	{ 0x11, KEY_RECORD },
-	{ 0x14, KEY_PLAY },
-	{ 0x4c, KEY_PAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x40, KEY_REWIND },
-	{ 0x12, KEY_FASTFORWARD },
-	{ 0x41, KEY_PREVIOUSSONG },	/* replay |< */
-	{ 0x42, KEY_NEXTSONG },		/* skip >| */
-	{ 0x54, KEY_CAMERA },		/* capture */
-	{ 0x50, KEY_LANGUAGE },		/* sap */
-	{ 0x47, KEY_TV2 },		/* pip */
-	{ 0x4d, KEY_SCREEN },
-	{ 0x43, KEY_SUBTITLE },
-	{ 0x10, KEY_MUTE },
-	{ 0x49, KEY_AUDIO },		/* l/r */
-	{ 0x07, KEY_SLEEP },
-	{ 0x08, KEY_VIDEO },		/* a/v */
-	{ 0x0e, KEY_PREVIOUS },		/* recall */
-	{ 0x45, KEY_ZOOM },		/* zoom + */
-	{ 0x46, KEY_ANGLE },		/* zoom - */
-	{ 0x56, KEY_RED },
-	{ 0x57, KEY_GREEN },
-	{ 0x5c, KEY_YELLOW },
-	{ 0x5d, KEY_BLUE },
-};
-
-static struct rc_keymap dntv_live_dvbt_pro_map = {
-	.map = {
-		.scan    = dntv_live_dvbt_pro,
-		.size    = ARRAY_SIZE(dntv_live_dvbt_pro),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_DNTV_LIVE_DVBT_PRO,
-	}
-};
-
-static int __init init_rc_map_dntv_live_dvbt_pro(void)
-{
-	return ir_register_map(&dntv_live_dvbt_pro_map);
-}
-
-static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
-{
-	ir_unregister_map(&dntv_live_dvbt_pro_map);
-}
-
-module_init(init_rc_map_dntv_live_dvbt_pro)
-module_exit(exit_rc_map_dntv_live_dvbt_pro)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-em-terratec.c b/drivers/media/IR/keymaps/rc-em-terratec.c
deleted file mode 100644
index 3130c9c29e6b..000000000000
--- a/drivers/media/IR/keymaps/rc-em-terratec.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* em-terratec.h - Keytable for em_terratec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode em_terratec[] = {
-	{ 0x01, KEY_CHANNEL },
-	{ 0x02, KEY_SELECT },
-	{ 0x03, KEY_MUTE },
-	{ 0x04, KEY_POWER },
-	{ 0x05, KEY_1 },
-	{ 0x06, KEY_2 },
-	{ 0x07, KEY_3 },
-	{ 0x08, KEY_CHANNELUP },
-	{ 0x09, KEY_4 },
-	{ 0x0a, KEY_5 },
-	{ 0x0b, KEY_6 },
-	{ 0x0c, KEY_CHANNELDOWN },
-	{ 0x0d, KEY_7 },
-	{ 0x0e, KEY_8 },
-	{ 0x0f, KEY_9 },
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_0 },
-	{ 0x12, KEY_MENU },
-	{ 0x13, KEY_PRINT },
-	{ 0x14, KEY_VOLUMEDOWN },
-	{ 0x16, KEY_PAUSE },
-	{ 0x18, KEY_RECORD },
-	{ 0x19, KEY_REWIND },
-	{ 0x1a, KEY_PLAY },
-	{ 0x1b, KEY_FORWARD },
-	{ 0x1c, KEY_BACKSPACE },
-	{ 0x1e, KEY_STOP },
-	{ 0x40, KEY_ZOOM },
-};
-
-static struct rc_keymap em_terratec_map = {
-	.map = {
-		.scan    = em_terratec,
-		.size    = ARRAY_SIZE(em_terratec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EM_TERRATEC,
-	}
-};
-
-static int __init init_rc_map_em_terratec(void)
-{
-	return ir_register_map(&em_terratec_map);
-}
-
-static void __exit exit_rc_map_em_terratec(void)
-{
-	ir_unregister_map(&em_terratec_map);
-}
-
-module_init(init_rc_map_em_terratec)
-module_exit(exit_rc_map_em_terratec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c b/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c
deleted file mode 100644
index 4b816967877e..000000000000
--- a/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV-FM v5.3
-   Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode encore_enltv_fm53[] = {
-	{ 0x10, KEY_POWER2},
-	{ 0x06, KEY_MUTE},
-
-	{ 0x09, KEY_1},
-	{ 0x1d, KEY_2},
-	{ 0x1f, KEY_3},
-	{ 0x19, KEY_4},
-	{ 0x1b, KEY_5},
-	{ 0x11, KEY_6},
-	{ 0x17, KEY_7},
-	{ 0x12, KEY_8},
-	{ 0x16, KEY_9},
-	{ 0x48, KEY_0},
-
-	{ 0x04, KEY_LIST},		/* -/-- */
-	{ 0x40, KEY_LAST},		/* recall */
-
-	{ 0x02, KEY_MODE},		/* TV/AV */
-	{ 0x05, KEY_CAMERA},		/* SNAPSHOT */
-
-	{ 0x4c, KEY_CHANNELUP},		/* UP */
-	{ 0x00, KEY_CHANNELDOWN},	/* DOWN */
-	{ 0x0d, KEY_VOLUMEUP},		/* RIGHT */
-	{ 0x15, KEY_VOLUMEDOWN},	/* LEFT */
-	{ 0x49, KEY_ENTER},		/* OK */
-
-	{ 0x54, KEY_RECORD},
-	{ 0x4d, KEY_PLAY},		/* pause */
-
-	{ 0x1e, KEY_MENU},		/* video setting */
-	{ 0x0e, KEY_RIGHT},		/* <- */
-	{ 0x1a, KEY_LEFT},		/* -> */
-
-	{ 0x0a, KEY_CLEAR},		/* video default */
-	{ 0x0c, KEY_ZOOM},		/* hide pannel */
-	{ 0x47, KEY_SLEEP},		/* shutdown */
-};
-
-static struct rc_keymap encore_enltv_fm53_map = {
-	.map = {
-		.scan    = encore_enltv_fm53,
-		.size    = ARRAY_SIZE(encore_enltv_fm53),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_ENCORE_ENLTV_FM53,
-	}
-};
-
-static int __init init_rc_map_encore_enltv_fm53(void)
-{
-	return ir_register_map(&encore_enltv_fm53_map);
-}
-
-static void __exit exit_rc_map_encore_enltv_fm53(void)
-{
-	ir_unregister_map(&encore_enltv_fm53_map);
-}
-
-module_init(init_rc_map_encore_enltv_fm53)
-module_exit(exit_rc_map_encore_enltv_fm53)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv.c b/drivers/media/IR/keymaps/rc-encore-enltv.c
deleted file mode 100644
index 9fabffd28cc9..000000000000
--- a/drivers/media/IR/keymaps/rc-encore-enltv.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* encore-enltv.h - Keytable for encore_enltv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV-FM  - black plastic, white front cover with white glowing buttons
-    Juan Pablo Sormani <sorman@gmail.com> */
-
-static struct ir_scancode encore_enltv[] = {
-
-	/* Power button does nothing, neither in Windows app,
-	 although it sends data (used for BIOS wakeup?) */
-	{ 0x0d, KEY_MUTE },
-
-	{ 0x1e, KEY_TV },
-	{ 0x00, KEY_VIDEO },
-	{ 0x01, KEY_AUDIO },		/* music */
-	{ 0x02, KEY_MHP },		/* picture */
-
-	{ 0x1f, KEY_1 },
-	{ 0x03, KEY_2 },
-	{ 0x04, KEY_3 },
-	{ 0x05, KEY_4 },
-	{ 0x1c, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x1d, KEY_9 },
-	{ 0x0a, KEY_0 },
-
-	{ 0x09, KEY_LIST },		/* -/-- */
-	{ 0x0b, KEY_LAST },		/* recall */
-
-	{ 0x14, KEY_HOME },		/* win start menu */
-	{ 0x15, KEY_EXIT },		/* exit */
-	{ 0x16, KEY_CHANNELUP },	/* UP */
-	{ 0x12, KEY_CHANNELDOWN },	/* DOWN */
-	{ 0x0c, KEY_VOLUMEUP },		/* RIGHT */
-	{ 0x17, KEY_VOLUMEDOWN },	/* LEFT */
-
-	{ 0x18, KEY_ENTER },		/* OK */
-
-	{ 0x0e, KEY_ESC },
-	{ 0x13, KEY_CYCLEWINDOWS },	/* desktop */
-	{ 0x11, KEY_TAB },
-	{ 0x19, KEY_SWITCHVIDEOMODE },	/* switch */
-
-	{ 0x1a, KEY_MENU },
-	{ 0x1b, KEY_ZOOM },		/* fullscreen */
-	{ 0x44, KEY_TIME },		/* time shift */
-	{ 0x40, KEY_MODE },		/* source */
-
-	{ 0x5a, KEY_RECORD },
-	{ 0x42, KEY_PLAY },		/* play/pause */
-	{ 0x45, KEY_STOP },
-	{ 0x43, KEY_CAMERA },		/* camera icon */
-
-	{ 0x48, KEY_REWIND },
-	{ 0x4a, KEY_FASTFORWARD },
-	{ 0x49, KEY_PREVIOUS },
-	{ 0x4b, KEY_NEXT },
-
-	{ 0x4c, KEY_FAVORITES },	/* tv wall */
-	{ 0x4d, KEY_SOUND },		/* DVD sound */
-	{ 0x4e, KEY_LANGUAGE },		/* DVD lang */
-	{ 0x4f, KEY_TEXT },		/* DVD text */
-
-	{ 0x50, KEY_SLEEP },		/* shutdown */
-	{ 0x51, KEY_MODE },		/* stereo > main */
-	{ 0x52, KEY_SELECT },		/* stereo > sap */
-	{ 0x53, KEY_PROG1 },		/* teletext */
-
-
-	{ 0x59, KEY_RED },		/* AP1 */
-	{ 0x41, KEY_GREEN },		/* AP2 */
-	{ 0x47, KEY_YELLOW },		/* AP3 */
-	{ 0x57, KEY_BLUE },		/* AP4 */
-};
-
-static struct rc_keymap encore_enltv_map = {
-	.map = {
-		.scan    = encore_enltv,
-		.size    = ARRAY_SIZE(encore_enltv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_ENCORE_ENLTV,
-	}
-};
-
-static int __init init_rc_map_encore_enltv(void)
-{
-	return ir_register_map(&encore_enltv_map);
-}
-
-static void __exit exit_rc_map_encore_enltv(void)
-{
-	ir_unregister_map(&encore_enltv_map);
-}
-
-module_init(init_rc_map_encore_enltv)
-module_exit(exit_rc_map_encore_enltv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv2.c b/drivers/media/IR/keymaps/rc-encore-enltv2.c
deleted file mode 100644
index efefd5166618..000000000000
--- a/drivers/media/IR/keymaps/rc-encore-enltv2.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
-    Mauro Carvalho Chehab <mchehab@infradead.org> */
-
-static struct ir_scancode encore_enltv2[] = {
-	{ 0x4c, KEY_POWER2 },
-	{ 0x4a, KEY_TUNER },
-	{ 0x40, KEY_1 },
-	{ 0x60, KEY_2 },
-	{ 0x50, KEY_3 },
-	{ 0x70, KEY_4 },
-	{ 0x48, KEY_5 },
-	{ 0x68, KEY_6 },
-	{ 0x58, KEY_7 },
-	{ 0x78, KEY_8 },
-	{ 0x44, KEY_9 },
-	{ 0x54, KEY_0 },
-
-	{ 0x64, KEY_LAST },		/* +100 */
-	{ 0x4e, KEY_AGAIN },		/* Recall */
-
-	{ 0x6c, KEY_SWITCHVIDEOMODE },	/* Video Source */
-	{ 0x5e, KEY_MENU },
-	{ 0x56, KEY_SCREEN },
-	{ 0x7a, KEY_SETUP },
-
-	{ 0x46, KEY_MUTE },
-	{ 0x5c, KEY_MODE },		/* Stereo */
-	{ 0x74, KEY_INFO },
-	{ 0x7c, KEY_CLEAR },
-
-	{ 0x55, KEY_UP },
-	{ 0x49, KEY_DOWN },
-	{ 0x7e, KEY_LEFT },
-	{ 0x59, KEY_RIGHT },
-	{ 0x6a, KEY_ENTER },
-
-	{ 0x42, KEY_VOLUMEUP },
-	{ 0x62, KEY_VOLUMEDOWN },
-	{ 0x52, KEY_CHANNELUP },
-	{ 0x72, KEY_CHANNELDOWN },
-
-	{ 0x41, KEY_RECORD },
-	{ 0x51, KEY_CAMERA },		/* Snapshot */
-	{ 0x75, KEY_TIME },		/* Timeshift */
-	{ 0x71, KEY_TV2 },		/* PIP */
-
-	{ 0x45, KEY_REWIND },
-	{ 0x6f, KEY_PAUSE },
-	{ 0x7d, KEY_FORWARD },
-	{ 0x79, KEY_STOP },
-};
-
-static struct rc_keymap encore_enltv2_map = {
-	.map = {
-		.scan    = encore_enltv2,
-		.size    = ARRAY_SIZE(encore_enltv2),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_ENCORE_ENLTV2,
-	}
-};
-
-static int __init init_rc_map_encore_enltv2(void)
-{
-	return ir_register_map(&encore_enltv2_map);
-}
-
-static void __exit exit_rc_map_encore_enltv2(void)
-{
-	ir_unregister_map(&encore_enltv2_map);
-}
-
-module_init(init_rc_map_encore_enltv2)
-module_exit(exit_rc_map_encore_enltv2)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-evga-indtube.c b/drivers/media/IR/keymaps/rc-evga-indtube.c
deleted file mode 100644
index 3f3fb13813b3..000000000000
--- a/drivers/media/IR/keymaps/rc-evga-indtube.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* evga-indtube.h - Keytable for evga_indtube Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* EVGA inDtube
-   Devin Heitmueller <devin.heitmueller@gmail.com>
- */
-
-static struct ir_scancode evga_indtube[] = {
-	{ 0x12, KEY_POWER},
-	{ 0x02, KEY_MODE},	/* TV */
-	{ 0x14, KEY_MUTE},
-	{ 0x1a, KEY_CHANNELUP},
-	{ 0x16, KEY_TV2},	/* PIP */
-	{ 0x1d, KEY_VOLUMEUP},
-	{ 0x05, KEY_CHANNELDOWN},
-	{ 0x0f, KEY_PLAYPAUSE},
-	{ 0x19, KEY_VOLUMEDOWN},
-	{ 0x1c, KEY_REWIND},
-	{ 0x0d, KEY_RECORD},
-	{ 0x18, KEY_FORWARD},
-	{ 0x1e, KEY_PREVIOUS},
-	{ 0x1b, KEY_STOP},
-	{ 0x1f, KEY_NEXT},
-	{ 0x13, KEY_CAMERA},
-};
-
-static struct rc_keymap evga_indtube_map = {
-	.map = {
-		.scan    = evga_indtube,
-		.size    = ARRAY_SIZE(evga_indtube),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EVGA_INDTUBE,
-	}
-};
-
-static int __init init_rc_map_evga_indtube(void)
-{
-	return ir_register_map(&evga_indtube_map);
-}
-
-static void __exit exit_rc_map_evga_indtube(void)
-{
-	ir_unregister_map(&evga_indtube_map);
-}
-
-module_init(init_rc_map_evga_indtube)
-module_exit(exit_rc_map_evga_indtube)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-eztv.c b/drivers/media/IR/keymaps/rc-eztv.c
deleted file mode 100644
index 660907a78db9..000000000000
--- a/drivers/media/IR/keymaps/rc-eztv.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* eztv.h - Keytable for eztv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Alfons Geser <a.geser@cox.net>
- * updates from Job D. R. Borges <jobdrb@ig.com.br> */
-
-static struct ir_scancode eztv[] = {
-	{ 0x12, KEY_POWER },
-	{ 0x01, KEY_TV },	/* DVR */
-	{ 0x15, KEY_DVD },	/* DVD */
-	{ 0x17, KEY_AUDIO },	/* music */
-				/* DVR mode / DVD mode / music mode */
-
-	{ 0x1b, KEY_MUTE },	/* mute */
-	{ 0x02, KEY_LANGUAGE },	/* MTS/SAP / audio / autoseek */
-	{ 0x1e, KEY_SUBTITLE },	/* closed captioning / subtitle / seek */
-	{ 0x16, KEY_ZOOM },	/* full screen */
-	{ 0x1c, KEY_VIDEO },	/* video source / eject / delall */
-	{ 0x1d, KEY_RESTART },	/* playback / angle / del */
-	{ 0x2f, KEY_SEARCH },	/* scan / menu / playlist */
-	{ 0x30, KEY_CHANNEL },	/* CH surfing / bookmark / memo */
-
-	{ 0x31, KEY_HELP },	/* help */
-	{ 0x32, KEY_MODE },	/* num/memo */
-	{ 0x33, KEY_ESC },	/* cancel */
-
-	{ 0x0c, KEY_UP },	/* up */
-	{ 0x10, KEY_DOWN },	/* down */
-	{ 0x08, KEY_LEFT },	/* left */
-	{ 0x04, KEY_RIGHT },	/* right */
-	{ 0x03, KEY_SELECT },	/* select */
-
-	{ 0x1f, KEY_REWIND },	/* rewind */
-	{ 0x20, KEY_PLAYPAUSE },/* play/pause */
-	{ 0x29, KEY_FORWARD },	/* forward */
-	{ 0x14, KEY_AGAIN },	/* repeat */
-	{ 0x2b, KEY_RECORD },	/* recording */
-	{ 0x2c, KEY_STOP },	/* stop */
-	{ 0x2d, KEY_PLAY },	/* play */
-	{ 0x2e, KEY_CAMERA },	/* snapshot / shuffle */
-
-	{ 0x00, KEY_0 },
-	{ 0x05, KEY_1 },
-	{ 0x06, KEY_2 },
-	{ 0x07, KEY_3 },
-	{ 0x09, KEY_4 },
-	{ 0x0a, KEY_5 },
-	{ 0x0b, KEY_6 },
-	{ 0x0d, KEY_7 },
-	{ 0x0e, KEY_8 },
-	{ 0x0f, KEY_9 },
-
-	{ 0x2a, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x18, KEY_CHANNELUP },/* CH.tracking up */
-	{ 0x19, KEY_CHANNELDOWN },/* CH.tracking down */
-
-	{ 0x13, KEY_ENTER },	/* enter */
-	{ 0x21, KEY_DOT },	/* . (decimal dot) */
-};
-
-static struct rc_keymap eztv_map = {
-	.map = {
-		.scan    = eztv,
-		.size    = ARRAY_SIZE(eztv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EZTV,
-	}
-};
-
-static int __init init_rc_map_eztv(void)
-{
-	return ir_register_map(&eztv_map);
-}
-
-static void __exit exit_rc_map_eztv(void)
-{
-	ir_unregister_map(&eztv_map);
-}
-
-module_init(init_rc_map_eztv)
-module_exit(exit_rc_map_eztv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-flydvb.c b/drivers/media/IR/keymaps/rc-flydvb.c
deleted file mode 100644
index a173c81035f4..000000000000
--- a/drivers/media/IR/keymaps/rc-flydvb.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/* flydvb.h - Keytable for flydvb Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode flydvb[] = {
-	{ 0x01, KEY_ZOOM },		/* Full Screen */
-	{ 0x00, KEY_POWER },		/* Power */
-
-	{ 0x03, KEY_1 },
-	{ 0x04, KEY_2 },
-	{ 0x05, KEY_3 },
-	{ 0x07, KEY_4 },
-	{ 0x08, KEY_5 },
-	{ 0x09, KEY_6 },
-	{ 0x0b, KEY_7 },
-	{ 0x0c, KEY_8 },
-	{ 0x0d, KEY_9 },
-	{ 0x06, KEY_AGAIN },		/* Recall */
-	{ 0x0f, KEY_0 },
-	{ 0x10, KEY_MUTE },		/* Mute */
-	{ 0x02, KEY_RADIO },		/* TV/Radio */
-	{ 0x1b, KEY_LANGUAGE },		/* SAP (Second Audio Program) */
-
-	{ 0x14, KEY_VOLUMEUP },		/* VOL+ */
-	{ 0x17, KEY_VOLUMEDOWN },	/* VOL- */
-	{ 0x12, KEY_CHANNELUP },	/* CH+ */
-	{ 0x13, KEY_CHANNELDOWN },	/* CH- */
-	{ 0x1d, KEY_ENTER },		/* Enter */
-
-	{ 0x1a, KEY_MODE },		/* PIP */
-	{ 0x18, KEY_TUNER },		/* Source */
-
-	{ 0x1e, KEY_RECORD },		/* Record/Pause */
-	{ 0x15, KEY_ANGLE },		/* Swap (no label on key) */
-	{ 0x1c, KEY_PAUSE },		/* Timeshift/Pause */
-	{ 0x19, KEY_BACK },		/* Rewind << */
-	{ 0x0a, KEY_PLAYPAUSE },	/* Play/Pause */
-	{ 0x1f, KEY_FORWARD },		/* Forward >> */
-	{ 0x16, KEY_PREVIOUS },		/* Back |<< */
-	{ 0x11, KEY_STOP },		/* Stop */
-	{ 0x0e, KEY_NEXT },		/* End >>| */
-};
-
-static struct rc_keymap flydvb_map = {
-	.map = {
-		.scan    = flydvb,
-		.size    = ARRAY_SIZE(flydvb),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_FLYDVB,
-	}
-};
-
-static int __init init_rc_map_flydvb(void)
-{
-	return ir_register_map(&flydvb_map);
-}
-
-static void __exit exit_rc_map_flydvb(void)
-{
-	ir_unregister_map(&flydvb_map);
-}
-
-module_init(init_rc_map_flydvb)
-module_exit(exit_rc_map_flydvb)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-flyvideo.c b/drivers/media/IR/keymaps/rc-flyvideo.c
deleted file mode 100644
index 9c73043cbdba..000000000000
--- a/drivers/media/IR/keymaps/rc-flyvideo.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* flyvideo.h - Keytable for flyvideo Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode flyvideo[] = {
-	{ 0x0f, KEY_0 },
-	{ 0x03, KEY_1 },
-	{ 0x04, KEY_2 },
-	{ 0x05, KEY_3 },
-	{ 0x07, KEY_4 },
-	{ 0x08, KEY_5 },
-	{ 0x09, KEY_6 },
-	{ 0x0b, KEY_7 },
-	{ 0x0c, KEY_8 },
-	{ 0x0d, KEY_9 },
-
-	{ 0x0e, KEY_MODE },	/* Air/Cable */
-	{ 0x11, KEY_VIDEO },	/* Video */
-	{ 0x15, KEY_AUDIO },	/* Audio */
-	{ 0x00, KEY_POWER },	/* Power */
-	{ 0x18, KEY_TUNER },	/* AV Source */
-	{ 0x02, KEY_ZOOM },	/* Fullscreen */
-	{ 0x1a, KEY_LANGUAGE },	/* Stereo */
-	{ 0x1b, KEY_MUTE },	/* Mute */
-	{ 0x14, KEY_VOLUMEUP },	/* Volume + */
-	{ 0x17, KEY_VOLUMEDOWN },/* Volume - */
-	{ 0x12, KEY_CHANNELUP },/* Channel + */
-	{ 0x13, KEY_CHANNELDOWN },/* Channel - */
-	{ 0x06, KEY_AGAIN },	/* Recall */
-	{ 0x10, KEY_ENTER },	/* Enter */
-
-	{ 0x19, KEY_BACK },	/* Rewind  ( <<< ) */
-	{ 0x1f, KEY_FORWARD },	/* Forward ( >>> ) */
-	{ 0x0a, KEY_ANGLE },	/* no label, may be used as the PAUSE button */
-};
-
-static struct rc_keymap flyvideo_map = {
-	.map = {
-		.scan    = flyvideo,
-		.size    = ARRAY_SIZE(flyvideo),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_FLYVIDEO,
-	}
-};
-
-static int __init init_rc_map_flyvideo(void)
-{
-	return ir_register_map(&flyvideo_map);
-}
-
-static void __exit exit_rc_map_flyvideo(void)
-{
-	ir_unregister_map(&flyvideo_map);
-}
-
-module_init(init_rc_map_flyvideo)
-module_exit(exit_rc_map_flyvideo)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c b/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c
deleted file mode 100644
index cdb10389b10e..000000000000
--- a/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DViCO FUSION HDTV MCE remote */
-
-static struct ir_scancode fusionhdtv_mce[] = {
-
-	{ 0x0b, KEY_1 },
-	{ 0x17, KEY_2 },
-	{ 0x1b, KEY_3 },
-	{ 0x07, KEY_4 },
-	{ 0x50, KEY_5 },
-	{ 0x54, KEY_6 },
-	{ 0x48, KEY_7 },
-	{ 0x4c, KEY_8 },
-	{ 0x58, KEY_9 },
-	{ 0x03, KEY_0 },
-
-	{ 0x5e, KEY_OK },
-	{ 0x51, KEY_UP },
-	{ 0x53, KEY_DOWN },
-	{ 0x5b, KEY_LEFT },
-	{ 0x5f, KEY_RIGHT },
-
-	{ 0x02, KEY_TV },		/* Labeled DTV on remote */
-	{ 0x0e, KEY_MP3 },
-	{ 0x1a, KEY_DVD },
-	{ 0x1e, KEY_FAVORITES },	/* Labeled CPF on remote */
-	{ 0x16, KEY_SETUP },
-	{ 0x46, KEY_POWER2 },		/* TV On/Off button on remote */
-	{ 0x0a, KEY_EPG },		/* Labeled Guide on remote */
-
-	{ 0x49, KEY_BACK },
-	{ 0x59, KEY_INFO },		/* Labeled MORE on remote */
-	{ 0x4d, KEY_MENU },		/* Labeled DVDMENU on remote */
-	{ 0x55, KEY_CYCLEWINDOWS },	/* Labeled ALT-TAB on remote */
-
-	{ 0x0f, KEY_PREVIOUSSONG },	/* Labeled |<< REPLAY on remote */
-	{ 0x12, KEY_NEXTSONG },		/* Labeled >>| SKIP on remote */
-	{ 0x42, KEY_ENTER },		/* Labeled START with a green
-					   MS windows logo on remote */
-
-	{ 0x15, KEY_VOLUMEUP },
-	{ 0x05, KEY_VOLUMEDOWN },
-	{ 0x11, KEY_CHANNELUP },
-	{ 0x09, KEY_CHANNELDOWN },
-
-	{ 0x52, KEY_CAMERA },
-	{ 0x5a, KEY_TUNER },
-	{ 0x19, KEY_OPEN },
-
-	{ 0x13, KEY_MODE },		/* 4:3 16:9 select */
-	{ 0x1f, KEY_ZOOM },
-
-	{ 0x43, KEY_REWIND },
-	{ 0x47, KEY_PLAYPAUSE },
-	{ 0x4f, KEY_FASTFORWARD },
-	{ 0x57, KEY_MUTE },
-	{ 0x0d, KEY_STOP },
-	{ 0x01, KEY_RECORD },
-	{ 0x4e, KEY_POWER },
-};
-
-static struct rc_keymap fusionhdtv_mce_map = {
-	.map = {
-		.scan    = fusionhdtv_mce,
-		.size    = ARRAY_SIZE(fusionhdtv_mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_FUSIONHDTV_MCE,
-	}
-};
-
-static int __init init_rc_map_fusionhdtv_mce(void)
-{
-	return ir_register_map(&fusionhdtv_mce_map);
-}
-
-static void __exit exit_rc_map_fusionhdtv_mce(void)
-{
-	ir_unregister_map(&fusionhdtv_mce_map);
-}
-
-module_init(init_rc_map_fusionhdtv_mce)
-module_exit(exit_rc_map_fusionhdtv_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-gadmei-rm008z.c b/drivers/media/IR/keymaps/rc-gadmei-rm008z.c
deleted file mode 100644
index c16c0d1263ac..000000000000
--- a/drivers/media/IR/keymaps/rc-gadmei-rm008z.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* GADMEI UTV330+ RM008Z remote
-   Shine Liu <shinel@foxmail.com>
- */
-
-static struct ir_scancode gadmei_rm008z[] = {
-	{ 0x14, KEY_POWER2},		/* POWER OFF */
-	{ 0x0c, KEY_MUTE},		/* MUTE */
-
-	{ 0x18, KEY_TV},		/* TV */
-	{ 0x0e, KEY_VIDEO},		/* AV */
-	{ 0x0b, KEY_AUDIO},		/* SV */
-	{ 0x0f, KEY_RADIO},		/* FM */
-
-	{ 0x00, KEY_1},
-	{ 0x01, KEY_2},
-	{ 0x02, KEY_3},
-	{ 0x03, KEY_4},
-	{ 0x04, KEY_5},
-	{ 0x05, KEY_6},
-	{ 0x06, KEY_7},
-	{ 0x07, KEY_8},
-	{ 0x08, KEY_9},
-	{ 0x09, KEY_0},
-	{ 0x0a, KEY_INFO},		/* OSD */
-	{ 0x1c, KEY_BACKSPACE},		/* LAST */
-
-	{ 0x0d, KEY_PLAY},		/* PLAY */
-	{ 0x1e, KEY_CAMERA},		/* SNAPSHOT */
-	{ 0x1a, KEY_RECORD},		/* RECORD */
-	{ 0x17, KEY_STOP},		/* STOP */
-
-	{ 0x1f, KEY_UP},		/* UP */
-	{ 0x44, KEY_DOWN},		/* DOWN */
-	{ 0x46, KEY_TAB},		/* BACK */
-	{ 0x4a, KEY_ZOOM},		/* FULLSECREEN */
-
-	{ 0x10, KEY_VOLUMEUP},		/* VOLUMEUP */
-	{ 0x11, KEY_VOLUMEDOWN},	/* VOLUMEDOWN */
-	{ 0x12, KEY_CHANNELUP},		/* CHANNELUP */
-	{ 0x13, KEY_CHANNELDOWN},	/* CHANNELDOWN */
-	{ 0x15, KEY_ENTER},		/* OK */
-};
-
-static struct rc_keymap gadmei_rm008z_map = {
-	.map = {
-		.scan    = gadmei_rm008z,
-		.size    = ARRAY_SIZE(gadmei_rm008z),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_GADMEI_RM008Z,
-	}
-};
-
-static int __init init_rc_map_gadmei_rm008z(void)
-{
-	return ir_register_map(&gadmei_rm008z_map);
-}
-
-static void __exit exit_rc_map_gadmei_rm008z(void)
-{
-	ir_unregister_map(&gadmei_rm008z_map);
-}
-
-module_init(init_rc_map_gadmei_rm008z)
-module_exit(exit_rc_map_gadmei_rm008z)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c
deleted file mode 100644
index 89f8e384e52a..000000000000
--- a/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Remote control for the Genius TVGO A11MCE
- * Adrian Pardini <pardo.bsso@gmail.com>
- */
-
-static struct ir_scancode genius_tvgo_a11mce[] = {
-	/* Keys 0 to 9 */
-	{ 0x48, KEY_0 },
-	{ 0x09, KEY_1 },
-	{ 0x1d, KEY_2 },
-	{ 0x1f, KEY_3 },
-	{ 0x19, KEY_4 },
-	{ 0x1b, KEY_5 },
-	{ 0x11, KEY_6 },
-	{ 0x17, KEY_7 },
-	{ 0x12, KEY_8 },
-	{ 0x16, KEY_9 },
-
-	{ 0x54, KEY_RECORD },		/* recording */
-	{ 0x06, KEY_MUTE },		/* mute */
-	{ 0x10, KEY_POWER },
-	{ 0x40, KEY_LAST },		/* recall */
-	{ 0x4c, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x00, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x0d, KEY_VOLUMEUP },
-	{ 0x15, KEY_VOLUMEDOWN },
-	{ 0x4d, KEY_OK },		/* also labeled as Pause */
-	{ 0x1c, KEY_ZOOM },		/* full screen and Stop*/
-	{ 0x02, KEY_MODE },		/* AV Source or Rewind*/
-	{ 0x04, KEY_LIST },		/* -/-- */
-	/* small arrows above numbers */
-	{ 0x1a, KEY_NEXT },		/* also Fast Forward */
-	{ 0x0e, KEY_PREVIOUS },		/* also Rewind */
-	/* these are in a rather non standard layout and have
-	an alternate name written */
-	{ 0x1e, KEY_UP },		/* Video Setting */
-	{ 0x0a, KEY_DOWN },		/* Video Default */
-	{ 0x05, KEY_CAMERA },		/* Snapshot */
-	{ 0x0c, KEY_RIGHT },		/* Hide Panel */
-	/* Four buttons without label */
-	{ 0x49, KEY_RED },
-	{ 0x0b, KEY_GREEN },
-	{ 0x13, KEY_YELLOW },
-	{ 0x50, KEY_BLUE },
-};
-
-static struct rc_keymap genius_tvgo_a11mce_map = {
-	.map = {
-		.scan    = genius_tvgo_a11mce,
-		.size    = ARRAY_SIZE(genius_tvgo_a11mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_GENIUS_TVGO_A11MCE,
-	}
-};
-
-static int __init init_rc_map_genius_tvgo_a11mce(void)
-{
-	return ir_register_map(&genius_tvgo_a11mce_map);
-}
-
-static void __exit exit_rc_map_genius_tvgo_a11mce(void)
-{
-	ir_unregister_map(&genius_tvgo_a11mce_map);
-}
-
-module_init(init_rc_map_genius_tvgo_a11mce)
-module_exit(exit_rc_map_genius_tvgo_a11mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-gotview7135.c b/drivers/media/IR/keymaps/rc-gotview7135.c
deleted file mode 100644
index 52f025bb35f6..000000000000
--- a/drivers/media/IR/keymaps/rc-gotview7135.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* gotview7135.h - Keytable for gotview7135 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mike Baikov <mike@baikov.com> */
-
-static struct ir_scancode gotview7135[] = {
-
-	{ 0x11, KEY_POWER },
-	{ 0x35, KEY_TV },
-	{ 0x1b, KEY_0 },
-	{ 0x29, KEY_1 },
-	{ 0x19, KEY_2 },
-	{ 0x39, KEY_3 },
-	{ 0x1f, KEY_4 },
-	{ 0x2c, KEY_5 },
-	{ 0x21, KEY_6 },
-	{ 0x24, KEY_7 },
-	{ 0x18, KEY_8 },
-	{ 0x2b, KEY_9 },
-	{ 0x3b, KEY_AGAIN },	/* LOOP */
-	{ 0x06, KEY_AUDIO },
-	{ 0x31, KEY_PRINT },	/* PREVIEW */
-	{ 0x3e, KEY_VIDEO },
-	{ 0x10, KEY_CHANNELUP },
-	{ 0x20, KEY_CHANNELDOWN },
-	{ 0x0c, KEY_VOLUMEDOWN },
-	{ 0x28, KEY_VOLUMEUP },
-	{ 0x08, KEY_MUTE },
-	{ 0x26, KEY_SEARCH },	/* SCAN */
-	{ 0x3f, KEY_CAMERA },	/* SNAPSHOT */
-	{ 0x12, KEY_RECORD },
-	{ 0x32, KEY_STOP },
-	{ 0x3c, KEY_PLAY },
-	{ 0x1d, KEY_REWIND },
-	{ 0x2d, KEY_PAUSE },
-	{ 0x0d, KEY_FORWARD },
-	{ 0x05, KEY_ZOOM },	/*FULL*/
-
-	{ 0x2a, KEY_F21 },	/* LIVE TIMESHIFT */
-	{ 0x0e, KEY_F22 },	/* MIN TIMESHIFT */
-	{ 0x1e, KEY_TIME },	/* TIMESHIFT */
-	{ 0x38, KEY_F24 },	/* NORMAL TIMESHIFT */
-};
-
-static struct rc_keymap gotview7135_map = {
-	.map = {
-		.scan    = gotview7135,
-		.size    = ARRAY_SIZE(gotview7135),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_GOTVIEW7135,
-	}
-};
-
-static int __init init_rc_map_gotview7135(void)
-{
-	return ir_register_map(&gotview7135_map);
-}
-
-static void __exit exit_rc_map_gotview7135(void)
-{
-	ir_unregister_map(&gotview7135_map);
-}
-
-module_init(init_rc_map_gotview7135)
-module_exit(exit_rc_map_gotview7135)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-hauppauge-new.c b/drivers/media/IR/keymaps/rc-hauppauge-new.c
deleted file mode 100644
index c6f8cd7c5186..000000000000
--- a/drivers/media/IR/keymaps/rc-hauppauge-new.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Hauppauge: the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- * almost rc5 coding, but some non-standard keys */
-
-static struct ir_scancode hauppauge_new[] = {
-	/* Keys 0 to 9 */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0a, KEY_TEXT },		/* keypad asterisk as well */
-	{ 0x0b, KEY_RED },		/* red button */
-	{ 0x0c, KEY_RADIO },
-	{ 0x0d, KEY_MENU },
-	{ 0x0e, KEY_SUBTITLE },		/* also the # key */
-	{ 0x0f, KEY_MUTE },
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x12, KEY_PREVIOUS },		/* previous channel */
-	{ 0x14, KEY_UP },
-	{ 0x15, KEY_DOWN },
-	{ 0x16, KEY_LEFT },
-	{ 0x17, KEY_RIGHT },
-	{ 0x18, KEY_VIDEO },		/* Videos */
-	{ 0x19, KEY_AUDIO },		/* Music */
-	/* 0x1a: Pictures - presume this means
-	   "Multimedia Home Platform" -
-	   no "PICTURES" key in input.h
-	 */
-	{ 0x1a, KEY_MHP },
-
-	{ 0x1b, KEY_EPG },		/* Guide */
-	{ 0x1c, KEY_TV },
-	{ 0x1e, KEY_NEXTSONG },		/* skip >| */
-	{ 0x1f, KEY_EXIT },		/* back/exit */
-	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x22, KEY_CHANNEL },		/* source (old black remote) */
-	{ 0x24, KEY_PREVIOUSSONG },	/* replay |< */
-	{ 0x25, KEY_ENTER },		/* OK */
-	{ 0x26, KEY_SLEEP },		/* minimize (old black remote) */
-	{ 0x29, KEY_BLUE },		/* blue key */
-	{ 0x2e, KEY_GREEN },		/* green button */
-	{ 0x30, KEY_PAUSE },		/* pause */
-	{ 0x32, KEY_REWIND },		/* backward << */
-	{ 0x34, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x35, KEY_PLAY },
-	{ 0x36, KEY_STOP },
-	{ 0x37, KEY_RECORD },		/* recording */
-	{ 0x38, KEY_YELLOW },		/* yellow key */
-	{ 0x3b, KEY_SELECT },		/* top right button */
-	{ 0x3c, KEY_ZOOM },		/* full */
-	{ 0x3d, KEY_POWER },		/* system power (green button) */
-};
-
-static struct rc_keymap hauppauge_new_map = {
-	.map = {
-		.scan    = hauppauge_new,
-		.size    = ARRAY_SIZE(hauppauge_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_HAUPPAUGE_NEW,
-	}
-};
-
-static int __init init_rc_map_hauppauge_new(void)
-{
-	return ir_register_map(&hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_hauppauge_new(void)
-{
-	ir_unregister_map(&hauppauge_new_map);
-}
-
-module_init(init_rc_map_hauppauge_new)
-module_exit(exit_rc_map_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-imon-mce.c b/drivers/media/IR/keymaps/rc-imon-mce.c
deleted file mode 100644
index e49f350e3a0d..000000000000
--- a/drivers/media/IR/keymaps/rc-imon-mce.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use
- * with the SoundGraph iMON/Antec Veris hardware IR decoder
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* mce-mode imon mce remote key table */
-static struct ir_scancode imon_mce[] = {
-	/* keys sorted mostly by frequency of use to optimize lookups */
-	{ 0x800ff415, KEY_REWIND },
-	{ 0x800ff414, KEY_FASTFORWARD },
-	{ 0x800ff41b, KEY_PREVIOUS },
-	{ 0x800ff41a, KEY_NEXT },
-
-	{ 0x800ff416, KEY_PLAY },
-	{ 0x800ff418, KEY_PAUSE },
-	{ 0x800ff419, KEY_STOP },
-	{ 0x800ff417, KEY_RECORD },
-
-	{ 0x02000052, KEY_UP },
-	{ 0x02000051, KEY_DOWN },
-	{ 0x02000050, KEY_LEFT },
-	{ 0x0200004f, KEY_RIGHT },
-
-	{ 0x800ff41e, KEY_UP },
-	{ 0x800ff41f, KEY_DOWN },
-	{ 0x800ff420, KEY_LEFT },
-	{ 0x800ff421, KEY_RIGHT },
-
-	/* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */
-	{ 0x800ff40b, KEY_ENTER },
-	{ 0x02000028, KEY_ENTER },
-/* the OK and Enter buttons decode to the same value on some remotes
-	{ 0x02000028, KEY_OK }, */
-	{ 0x800ff422, KEY_OK },
-	{ 0x0200002a, KEY_EXIT },
-	{ 0x800ff423, KEY_EXIT },
-	{ 0x02000029, KEY_DELETE },
-	/* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */
-	{ 0x800ff40a, KEY_DELETE },
-
-	{ 0x800ff40e, KEY_MUTE },
-	{ 0x800ff410, KEY_VOLUMEUP },
-	{ 0x800ff411, KEY_VOLUMEDOWN },
-	{ 0x800ff412, KEY_CHANNELUP },
-	{ 0x800ff413, KEY_CHANNELDOWN },
-
-	{ 0x0200001e, KEY_NUMERIC_1 },
-	{ 0x0200001f, KEY_NUMERIC_2 },
-	{ 0x02000020, KEY_NUMERIC_3 },
-	{ 0x02000021, KEY_NUMERIC_4 },
-	{ 0x02000022, KEY_NUMERIC_5 },
-	{ 0x02000023, KEY_NUMERIC_6 },
-	{ 0x02000024, KEY_NUMERIC_7 },
-	{ 0x02000025, KEY_NUMERIC_8 },
-	{ 0x02000026, KEY_NUMERIC_9 },
-	{ 0x02000027, KEY_NUMERIC_0 },
-
-	{ 0x800ff401, KEY_NUMERIC_1 },
-	{ 0x800ff402, KEY_NUMERIC_2 },
-	{ 0x800ff403, KEY_NUMERIC_3 },
-	{ 0x800ff404, KEY_NUMERIC_4 },
-	{ 0x800ff405, KEY_NUMERIC_5 },
-	{ 0x800ff406, KEY_NUMERIC_6 },
-	{ 0x800ff407, KEY_NUMERIC_7 },
-	{ 0x800ff408, KEY_NUMERIC_8 },
-	{ 0x800ff409, KEY_NUMERIC_9 },
-	{ 0x800ff400, KEY_NUMERIC_0 },
-
-	{ 0x02200025, KEY_NUMERIC_STAR },
-	{ 0x02200020, KEY_NUMERIC_POUND },
-	/* 0x800ff41d also KEY_BLUE on some receivers */
-	{ 0x800ff41d, KEY_NUMERIC_STAR },
-	/* 0x800ff41c also KEY_PREVIOUS on some receivers */
-	{ 0x800ff41c, KEY_NUMERIC_POUND },
-
-	{ 0x800ff446, KEY_TV },
-	{ 0x800ff447, KEY_AUDIO }, /* My Music */
-	{ 0x800ff448, KEY_PVR }, /* RecordedTV */
-	{ 0x800ff449, KEY_CAMERA },
-	{ 0x800ff44a, KEY_VIDEO },
-	/* 0x800ff424 also KEY_MENU on some receivers */
-	{ 0x800ff424, KEY_DVD },
-	/* 0x800ff425 also KEY_GREEN on some receivers */
-	{ 0x800ff425, KEY_TUNER }, /* LiveTV */
-	{ 0x800ff450, KEY_RADIO },
-
-	{ 0x800ff44c, KEY_LANGUAGE },
-	{ 0x800ff427, KEY_ZOOM }, /* Aspect */
-
-	{ 0x800ff45b, KEY_RED },
-	{ 0x800ff45c, KEY_GREEN },
-	{ 0x800ff45d, KEY_YELLOW },
-	{ 0x800ff45e, KEY_BLUE },
-
-	{ 0x800ff466, KEY_RED },
-	/* { 0x800ff425, KEY_GREEN }, */
-	{ 0x800ff468, KEY_YELLOW },
-	/* { 0x800ff41d, KEY_BLUE }, */
-
-	{ 0x800ff40f, KEY_INFO },
-	{ 0x800ff426, KEY_EPG }, /* Guide */
-	{ 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */
-	{ 0x800ff44d, KEY_TITLE },
-
-	{ 0x800ff40c, KEY_POWER },
-	{ 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */
-
-};
-
-static struct rc_keymap imon_mce_map = {
-	.map = {
-		.scan    = imon_mce,
-		.size    = ARRAY_SIZE(imon_mce),
-		/* its RC6, but w/a hardware decoder */
-		.ir_type = IR_TYPE_RC6,
-		.name    = RC_MAP_IMON_MCE,
-	}
-};
-
-static int __init init_rc_map_imon_mce(void)
-{
-	return ir_register_map(&imon_mce_map);
-}
-
-static void __exit exit_rc_map_imon_mce(void)
-{
-	ir_unregister_map(&imon_mce_map);
-}
-
-module_init(init_rc_map_imon_mce)
-module_exit(exit_rc_map_imon_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-imon-pad.c b/drivers/media/IR/keymaps/rc-imon-pad.c
deleted file mode 100644
index bc4db72f02e6..000000000000
--- a/drivers/media/IR/keymaps/rc-imon-pad.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris
- * RM-200 Remote Control
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * standard imon remote key table, which isn't really entirely
- * "standard", as different receivers decode the same key on the
- * same remote to different hex codes, and the silkscreened names
- * vary a bit between the SoundGraph and Antec remotes... ugh.
- */
-static struct ir_scancode imon_pad[] = {
-	/* keys sorted mostly by frequency of use to optimize lookups */
-	{ 0x2a8195b7, KEY_REWIND },
-	{ 0x298315b7, KEY_REWIND },
-	{ 0x2b8115b7, KEY_FASTFORWARD },
-	{ 0x2b8315b7, KEY_FASTFORWARD },
-	{ 0x2b9115b7, KEY_PREVIOUS },
-	{ 0x298195b7, KEY_NEXT },
-
-	{ 0x2a8115b7, KEY_PLAY },
-	{ 0x2a8315b7, KEY_PLAY },
-	{ 0x2a9115b7, KEY_PAUSE },
-	{ 0x2b9715b7, KEY_STOP },
-	{ 0x298115b7, KEY_RECORD },
-
-	{ 0x01008000, KEY_UP },
-	{ 0x01007f00, KEY_DOWN },
-	{ 0x01000080, KEY_LEFT },
-	{ 0x0100007f, KEY_RIGHT },
-
-	{ 0x2aa515b7, KEY_UP },
-	{ 0x289515b7, KEY_DOWN },
-	{ 0x29a515b7, KEY_LEFT },
-	{ 0x2ba515b7, KEY_RIGHT },
-
-	{ 0x0200002c, KEY_SPACE }, /* Select/Space */
-	{ 0x2a9315b7, KEY_SPACE }, /* Select/Space */
-	{ 0x02000028, KEY_ENTER },
-	{ 0x28a195b7, KEY_ENTER },
-	{ 0x288195b7, KEY_EXIT },
-	{ 0x02000029, KEY_ESC },
-	{ 0x2bb715b7, KEY_ESC },
-	{ 0x0200002a, KEY_BACKSPACE },
-	{ 0x28a115b7, KEY_BACKSPACE },
-
-	{ 0x2b9595b7, KEY_MUTE },
-	{ 0x28a395b7, KEY_VOLUMEUP },
-	{ 0x28a595b7, KEY_VOLUMEDOWN },
-	{ 0x289395b7, KEY_CHANNELUP },
-	{ 0x288795b7, KEY_CHANNELDOWN },
-
-	{ 0x0200001e, KEY_NUMERIC_1 },
-	{ 0x0200001f, KEY_NUMERIC_2 },
-	{ 0x02000020, KEY_NUMERIC_3 },
-	{ 0x02000021, KEY_NUMERIC_4 },
-	{ 0x02000022, KEY_NUMERIC_5 },
-	{ 0x02000023, KEY_NUMERIC_6 },
-	{ 0x02000024, KEY_NUMERIC_7 },
-	{ 0x02000025, KEY_NUMERIC_8 },
-	{ 0x02000026, KEY_NUMERIC_9 },
-	{ 0x02000027, KEY_NUMERIC_0 },
-
-	{ 0x28b595b7, KEY_NUMERIC_1 },
-	{ 0x2bb195b7, KEY_NUMERIC_2 },
-	{ 0x28b195b7, KEY_NUMERIC_3 },
-	{ 0x2a8595b7, KEY_NUMERIC_4 },
-	{ 0x299595b7, KEY_NUMERIC_5 },
-	{ 0x2aa595b7, KEY_NUMERIC_6 },
-	{ 0x2b9395b7, KEY_NUMERIC_7 },
-	{ 0x2a8515b7, KEY_NUMERIC_8 },
-	{ 0x2aa115b7, KEY_NUMERIC_9 },
-	{ 0x2ba595b7, KEY_NUMERIC_0 },
-
-	{ 0x02200025, KEY_NUMERIC_STAR },
-	{ 0x28b515b7, KEY_NUMERIC_STAR },
-	{ 0x02200020, KEY_NUMERIC_POUND },
-	{ 0x29a115b7, KEY_NUMERIC_POUND },
-
-	{ 0x2b8515b7, KEY_VIDEO },
-	{ 0x299195b7, KEY_AUDIO },
-	{ 0x2ba115b7, KEY_CAMERA },
-	{ 0x28a515b7, KEY_TV },
-	{ 0x29a395b7, KEY_DVD },
-	{ 0x29a295b7, KEY_DVD },
-
-	/* the Menu key between DVD and Subtitle on the RM-200... */
-	{ 0x2ba385b7, KEY_MENU },
-	{ 0x2ba395b7, KEY_MENU },
-
-	{ 0x288515b7, KEY_BOOKMARKS },
-	{ 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */
-	{ 0x298595b7, KEY_SUBTITLE },
-	{ 0x2b8595b7, KEY_LANGUAGE },
-
-	{ 0x29a595b7, KEY_ZOOM },
-	{ 0x2aa395b7, KEY_SCREEN }, /* FullScreen */
-
-	{ 0x299115b7, KEY_KEYBOARD },
-	{ 0x299135b7, KEY_KEYBOARD },
-
-	{ 0x01010000, BTN_LEFT },
-	{ 0x01020000, BTN_RIGHT },
-	{ 0x01010080, BTN_LEFT },
-	{ 0x01020080, BTN_RIGHT },
-	{ 0x688301b7, BTN_LEFT },
-	{ 0x688481b7, BTN_RIGHT },
-
-	{ 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */
-	{ 0x2b8395b7, KEY_TIME }, /* Timer */
-
-	{ 0x289115b7, KEY_POWER },
-	{ 0x29b195b7, KEY_EJECTCD }, /* the one next to play */
-	{ 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */
-
-	{ 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */
-	{ 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/
-	{ 0x02000065, KEY_COMPOSE }, /* RightMenu */
-	{ 0x28b715b7, KEY_COMPOSE }, /* RightMenu */
-	{ 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */
-	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
-};
-
-static struct rc_keymap imon_pad_map = {
-	.map = {
-		.scan    = imon_pad,
-		.size    = ARRAY_SIZE(imon_pad),
-		/* actual protocol details unknown, hardware decoder */
-		.ir_type = IR_TYPE_OTHER,
-		.name    = RC_MAP_IMON_PAD,
-	}
-};
-
-static int __init init_rc_map_imon_pad(void)
-{
-	return ir_register_map(&imon_pad_map);
-}
-
-static void __exit exit_rc_map_imon_pad(void)
-{
-	ir_unregister_map(&imon_pad_map);
-}
-
-module_init(init_rc_map_imon_pad)
-module_exit(exit_rc_map_imon_pad)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-iodata-bctv7e.c b/drivers/media/IR/keymaps/rc-iodata-bctv7e.c
deleted file mode 100644
index ef6600259fc0..000000000000
--- a/drivers/media/IR/keymaps/rc-iodata-bctv7e.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* IO-DATA BCTV7E Remote */
-
-static struct ir_scancode iodata_bctv7e[] = {
-	{ 0x40, KEY_TV },
-	{ 0x20, KEY_RADIO },		/* FM */
-	{ 0x60, KEY_EPG },
-	{ 0x00, KEY_POWER },
-
-	/* Keys 0 to 9 */
-	{ 0x44, KEY_0 },		/* 10 */
-	{ 0x50, KEY_1 },
-	{ 0x30, KEY_2 },
-	{ 0x70, KEY_3 },
-	{ 0x48, KEY_4 },
-	{ 0x28, KEY_5 },
-	{ 0x68, KEY_6 },
-	{ 0x58, KEY_7 },
-	{ 0x38, KEY_8 },
-	{ 0x78, KEY_9 },
-
-	{ 0x10, KEY_L },		/* Live */
-	{ 0x08, KEY_TIME },		/* Time Shift */
-
-	{ 0x18, KEY_PLAYPAUSE },	/* Play */
-
-	{ 0x24, KEY_ENTER },		/* 11 */
-	{ 0x64, KEY_ESC },		/* 12 */
-	{ 0x04, KEY_M },		/* Multi */
-
-	{ 0x54, KEY_VIDEO },
-	{ 0x34, KEY_CHANNELUP },
-	{ 0x74, KEY_VOLUMEUP },
-	{ 0x14, KEY_MUTE },
-
-	{ 0x4c, KEY_VCR },		/* SVIDEO */
-	{ 0x2c, KEY_CHANNELDOWN },
-	{ 0x6c, KEY_VOLUMEDOWN },
-	{ 0x0c, KEY_ZOOM },
-
-	{ 0x5c, KEY_PAUSE },
-	{ 0x3c, KEY_RED },		/* || (red) */
-	{ 0x7c, KEY_RECORD },		/* recording */
-	{ 0x1c, KEY_STOP },
-
-	{ 0x41, KEY_REWIND },		/* backward << */
-	{ 0x21, KEY_PLAY },
-	{ 0x61, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x01, KEY_NEXT },		/* skip >| */
-};
-
-static struct rc_keymap iodata_bctv7e_map = {
-	.map = {
-		.scan    = iodata_bctv7e,
-		.size    = ARRAY_SIZE(iodata_bctv7e),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_IODATA_BCTV7E,
-	}
-};
-
-static int __init init_rc_map_iodata_bctv7e(void)
-{
-	return ir_register_map(&iodata_bctv7e_map);
-}
-
-static void __exit exit_rc_map_iodata_bctv7e(void)
-{
-	ir_unregister_map(&iodata_bctv7e_map);
-}
-
-module_init(init_rc_map_iodata_bctv7e)
-module_exit(exit_rc_map_iodata_bctv7e)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-kaiomy.c b/drivers/media/IR/keymaps/rc-kaiomy.c
deleted file mode 100644
index 4c7883ba0f15..000000000000
--- a/drivers/media/IR/keymaps/rc-kaiomy.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* kaiomy.h - Keytable for kaiomy Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kaiomy TVnPC U2
-   Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode kaiomy[] = {
-	{ 0x43, KEY_POWER2},
-	{ 0x01, KEY_LIST},
-	{ 0x0b, KEY_ZOOM},
-	{ 0x03, KEY_POWER},
-
-	{ 0x04, KEY_1},
-	{ 0x08, KEY_2},
-	{ 0x02, KEY_3},
-
-	{ 0x0f, KEY_4},
-	{ 0x05, KEY_5},
-	{ 0x06, KEY_6},
-
-	{ 0x0c, KEY_7},
-	{ 0x0d, KEY_8},
-	{ 0x0a, KEY_9},
-
-	{ 0x11, KEY_0},
-
-	{ 0x09, KEY_CHANNELUP},
-	{ 0x07, KEY_CHANNELDOWN},
-
-	{ 0x0e, KEY_VOLUMEUP},
-	{ 0x13, KEY_VOLUMEDOWN},
-
-	{ 0x10, KEY_HOME},
-	{ 0x12, KEY_ENTER},
-
-	{ 0x14, KEY_RECORD},
-	{ 0x15, KEY_STOP},
-	{ 0x16, KEY_PLAY},
-	{ 0x17, KEY_MUTE},
-
-	{ 0x18, KEY_UP},
-	{ 0x19, KEY_DOWN},
-	{ 0x1a, KEY_LEFT},
-	{ 0x1b, KEY_RIGHT},
-
-	{ 0x1c, KEY_RED},
-	{ 0x1d, KEY_GREEN},
-	{ 0x1e, KEY_YELLOW},
-	{ 0x1f, KEY_BLUE},
-};
-
-static struct rc_keymap kaiomy_map = {
-	.map = {
-		.scan    = kaiomy,
-		.size    = ARRAY_SIZE(kaiomy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_KAIOMY,
-	}
-};
-
-static int __init init_rc_map_kaiomy(void)
-{
-	return ir_register_map(&kaiomy_map);
-}
-
-static void __exit exit_rc_map_kaiomy(void)
-{
-	ir_unregister_map(&kaiomy_map);
-}
-
-module_init(init_rc_map_kaiomy)
-module_exit(exit_rc_map_kaiomy)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-kworld-315u.c b/drivers/media/IR/keymaps/rc-kworld-315u.c
deleted file mode 100644
index 618c817374e6..000000000000
--- a/drivers/media/IR/keymaps/rc-kworld-315u.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* kworld-315u.h - Keytable for kworld_315u Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kworld 315U
- */
-
-static struct ir_scancode kworld_315u[] = {
-	{ 0x6143, KEY_POWER },
-	{ 0x6101, KEY_TUNER },		/* source */
-	{ 0x610b, KEY_ZOOM },
-	{ 0x6103, KEY_POWER2 },		/* shutdown */
-
-	{ 0x6104, KEY_1 },
-	{ 0x6108, KEY_2 },
-	{ 0x6102, KEY_3 },
-	{ 0x6109, KEY_CHANNELUP },
-
-	{ 0x610f, KEY_4 },
-	{ 0x6105, KEY_5 },
-	{ 0x6106, KEY_6 },
-	{ 0x6107, KEY_CHANNELDOWN },
-
-	{ 0x610c, KEY_7 },
-	{ 0x610d, KEY_8 },
-	{ 0x610a, KEY_9 },
-	{ 0x610e, KEY_VOLUMEUP },
-
-	{ 0x6110, KEY_LAST },
-	{ 0x6111, KEY_0 },
-	{ 0x6112, KEY_ENTER },
-	{ 0x6113, KEY_VOLUMEDOWN },
-
-	{ 0x6114, KEY_RECORD },
-	{ 0x6115, KEY_STOP },
-	{ 0x6116, KEY_PLAY },
-	{ 0x6117, KEY_MUTE },
-
-	{ 0x6118, KEY_UP },
-	{ 0x6119, KEY_DOWN },
-	{ 0x611a, KEY_LEFT },
-	{ 0x611b, KEY_RIGHT },
-
-	{ 0x611c, KEY_RED },
-	{ 0x611d, KEY_GREEN },
-	{ 0x611e, KEY_YELLOW },
-	{ 0x611f, KEY_BLUE },
-};
-
-static struct rc_keymap kworld_315u_map = {
-	.map = {
-		.scan    = kworld_315u,
-		.size    = ARRAY_SIZE(kworld_315u),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_KWORLD_315U,
-	}
-};
-
-static int __init init_rc_map_kworld_315u(void)
-{
-	return ir_register_map(&kworld_315u_map);
-}
-
-static void __exit exit_rc_map_kworld_315u(void)
-{
-	ir_unregister_map(&kworld_315u_map);
-}
-
-module_init(init_rc_map_kworld_315u)
-module_exit(exit_rc_map_kworld_315u)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c
deleted file mode 100644
index 366732f1f7b7..000000000000
--- a/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kworld Plus TV Analog Lite PCI IR
-   Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode kworld_plus_tv_analog[] = {
-	{ 0x0c, KEY_PROG1 },		/* Kworld key */
-	{ 0x16, KEY_CLOSECD },		/* -> ) */
-	{ 0x1d, KEY_POWER2 },
-
-	{ 0x00, KEY_1 },
-	{ 0x01, KEY_2 },
-	{ 0x02, KEY_3 },		/* Two keys have the same code: 3 and left */
-	{ 0x03, KEY_4 },		/* Two keys have the same code: 3 and right */
-	{ 0x04, KEY_5 },
-	{ 0x05, KEY_6 },
-	{ 0x06, KEY_7 },
-	{ 0x07, KEY_8 },
-	{ 0x08, KEY_9 },
-	{ 0x0a, KEY_0 },
-
-	{ 0x09, KEY_AGAIN },
-	{ 0x14, KEY_MUTE },
-
-	{ 0x20, KEY_UP },
-	{ 0x21, KEY_DOWN },
-	{ 0x0b, KEY_ENTER },
-
-	{ 0x10, KEY_CHANNELUP },
-	{ 0x11, KEY_CHANNELDOWN },
-
-	/* Couldn't map key left/key right since those
-	   conflict with '3' and '4' scancodes
-	   I dunno what the original driver does
-	 */
-
-	{ 0x13, KEY_VOLUMEUP },
-	{ 0x12, KEY_VOLUMEDOWN },
-
-	/* The lower part of the IR
-	   There are several duplicated keycodes there.
-	   Most of them conflict with digits.
-	   Add mappings just to the unused scancodes.
-	   Somehow, the original driver has a way to know,
-	   but this doesn't seem to be on some GPIO.
-	   Also, it is not related to the time between keyup
-	   and keydown.
-	 */
-	{ 0x19, KEY_TIME},		/* Timeshift */
-	{ 0x1a, KEY_STOP},
-	{ 0x1b, KEY_RECORD},
-
-	{ 0x22, KEY_TEXT},
-
-	{ 0x15, KEY_AUDIO},		/* ((*)) */
-	{ 0x0f, KEY_ZOOM},
-	{ 0x1c, KEY_CAMERA},		/* snapshot */
-
-	{ 0x18, KEY_RED},		/* B */
-	{ 0x23, KEY_GREEN},		/* C */
-};
-
-static struct rc_keymap kworld_plus_tv_analog_map = {
-	.map = {
-		.scan    = kworld_plus_tv_analog,
-		.size    = ARRAY_SIZE(kworld_plus_tv_analog),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_KWORLD_PLUS_TV_ANALOG,
-	}
-};
-
-static int __init init_rc_map_kworld_plus_tv_analog(void)
-{
-	return ir_register_map(&kworld_plus_tv_analog_map);
-}
-
-static void __exit exit_rc_map_kworld_plus_tv_analog(void)
-{
-	ir_unregister_map(&kworld_plus_tv_analog_map);
-}
-
-module_init(init_rc_map_kworld_plus_tv_analog)
-module_exit(exit_rc_map_kworld_plus_tv_analog)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-leadtek-y04g0051.c b/drivers/media/IR/keymaps/rc-leadtek-y04g0051.c
deleted file mode 100644
index 7521315fd876..000000000000
--- a/drivers/media/IR/keymaps/rc-leadtek-y04g0051.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * LeadTek Y04G0051 remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode leadtek_y04g0051[] = {
-	{ 0x0300, KEY_POWER2 },
-	{ 0x0303, KEY_SCREEN },
-	{ 0x0304, KEY_RIGHT },
-	{ 0x0305, KEY_1 },
-	{ 0x0306, KEY_2 },
-	{ 0x0307, KEY_3 },
-	{ 0x0308, KEY_LEFT },
-	{ 0x0309, KEY_4 },
-	{ 0x030a, KEY_5 },
-	{ 0x030b, KEY_6 },
-	{ 0x030c, KEY_UP },
-	{ 0x030d, KEY_7 },
-	{ 0x030e, KEY_8 },
-	{ 0x030f, KEY_9 },
-	{ 0x0310, KEY_DOWN },
-	{ 0x0311, KEY_AGAIN },
-	{ 0x0312, KEY_0 },
-	{ 0x0313, KEY_OK },              /* 1st ok */
-	{ 0x0314, KEY_MUTE },
-	{ 0x0316, KEY_OK },              /* 2nd ok */
-	{ 0x031e, KEY_VIDEO },           /* 2nd video */
-	{ 0x031b, KEY_AUDIO },
-	{ 0x031f, KEY_TEXT },
-	{ 0x0340, KEY_SLEEP },
-	{ 0x0341, KEY_DOT },
-	{ 0x0342, KEY_REWIND },
-	{ 0x0343, KEY_PLAY },
-	{ 0x0344, KEY_FASTFORWARD },
-	{ 0x0345, KEY_TIME },
-	{ 0x0346, KEY_STOP },            /* 2nd stop */
-	{ 0x0347, KEY_RECORD },
-	{ 0x0348, KEY_CAMERA },
-	{ 0x0349, KEY_ESC },
-	{ 0x034a, KEY_NEW },
-	{ 0x034b, KEY_RED },
-	{ 0x034c, KEY_GREEN },
-	{ 0x034d, KEY_YELLOW },
-	{ 0x034e, KEY_BLUE },
-	{ 0x034f, KEY_MENU },
-	{ 0x0350, KEY_STOP },            /* 1st stop */
-	{ 0x0351, KEY_CHANNEL },
-	{ 0x0352, KEY_VIDEO },           /* 1st video */
-	{ 0x0353, KEY_EPG },
-	{ 0x0354, KEY_PREVIOUS },
-	{ 0x0355, KEY_NEXT },
-	{ 0x0356, KEY_TV },
-	{ 0x035a, KEY_VOLUMEDOWN },
-	{ 0x035b, KEY_CHANNELUP },
-	{ 0x035e, KEY_VOLUMEUP },
-	{ 0x035f, KEY_CHANNELDOWN },
-};
-
-static struct rc_keymap leadtek_y04g0051_map = {
-	.map = {
-		.scan    = leadtek_y04g0051,
-		.size    = ARRAY_SIZE(leadtek_y04g0051),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_LEADTEK_Y04G0051,
-	}
-};
-
-static int __init init_rc_map_leadtek_y04g0051(void)
-{
-	return ir_register_map(&leadtek_y04g0051_map);
-}
-
-static void __exit exit_rc_map_leadtek_y04g0051(void)
-{
-	ir_unregister_map(&leadtek_y04g0051_map);
-}
-
-module_init(init_rc_map_leadtek_y04g0051)
-module_exit(exit_rc_map_leadtek_y04g0051)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-lirc.c b/drivers/media/IR/keymaps/rc-lirc.c
deleted file mode 100644
index 43fcf9035082..000000000000
--- a/drivers/media/IR/keymaps/rc-lirc.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
- * all raw IR data to the lirc userspace decoder.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/ir-core.h>
-
-static struct ir_scancode lirc[] = {
-	{ },
-};
-
-static struct rc_keymap lirc_map = {
-	.map = {
-		.scan    = lirc,
-		.size    = ARRAY_SIZE(lirc),
-		.ir_type = IR_TYPE_LIRC,
-		.name    = RC_MAP_LIRC,
-	}
-};
-
-static int __init init_rc_map_lirc(void)
-{
-	return ir_register_map(&lirc_map);
-}
-
-static void __exit exit_rc_map_lirc(void)
-{
-	ir_unregister_map(&lirc_map);
-}
-
-module_init(init_rc_map_lirc)
-module_exit(exit_rc_map_lirc)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-lme2510.c b/drivers/media/IR/keymaps/rc-lme2510.c
deleted file mode 100644
index 40dcf0b4e21a..000000000000
--- a/drivers/media/IR/keymaps/rc-lme2510.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* LME2510 remote control
- *
- *
- * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-
-static struct ir_scancode lme2510_rc[] = {
-	{ 0xba45, KEY_0 },
-	{ 0xa05f, KEY_1 },
-	{ 0xaf50, KEY_2 },
-	{ 0xa25d, KEY_3 },
-	{ 0xbe41, KEY_4 },
-	{ 0xf50a, KEY_5 },
-	{ 0xbd42, KEY_6 },
-	{ 0xb847, KEY_7 },
-	{ 0xb649, KEY_8 },
-	{ 0xfa05, KEY_9 },
-	{ 0xbc43, KEY_POWER },
-	{ 0xb946, KEY_SUBTITLE },
-	{ 0xf906, KEY_PAUSE },
-	{ 0xfc03, KEY_MEDIA_REPEAT},
-	{ 0xfd02, KEY_PAUSE },
-	{ 0xa15e, KEY_VOLUMEUP },
-	{ 0xa35c, KEY_VOLUMEDOWN },
-	{ 0xf609, KEY_CHANNELUP },
-	{ 0xe51a, KEY_CHANNELDOWN },
-	{ 0xe11e, KEY_PLAY },
-	{ 0xe41b, KEY_ZOOM },
-	{ 0xa659, KEY_MUTE },
-	{ 0xa55a, KEY_TV },
-	{ 0xe718, KEY_RECORD },
-	{ 0xf807, KEY_EPG },
-	{ 0xfe01, KEY_STOP },
-
-};
-
-static struct rc_keymap lme2510_map = {
-	.map = {
-		.scan    = lme2510_rc,
-		.size    = ARRAY_SIZE(lme2510_rc),
-		.ir_type = IR_TYPE_UNKNOWN,
-		.name    = RC_MAP_LME2510,
-	}
-};
-
-static int __init init_rc_lme2510_map(void)
-{
-	return ir_register_map(&lme2510_map);
-}
-
-static void __exit exit_rc_lme2510_map(void)
-{
-	ir_unregister_map(&lme2510_map);
-}
-
-module_init(init_rc_lme2510_map)
-module_exit(exit_rc_lme2510_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
deleted file mode 100644
index 0f590b3d01c0..000000000000
--- a/drivers/media/IR/keymaps/rc-manli.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* manli.h - Keytable for manli Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Michael Tokarev <mjt@tls.msk.ru>
-   keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
-   least, and probably other cards too.
-   The "ascii-art picture" below (in comments, first row
-   is the keycode in hex, and subsequent row(s) shows
-   the button labels (several variants when appropriate)
-   helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode manli[] = {
-
-	/*  0x1c            0x12  *
-	 * FUNCTION         POWER *
-	 *   FM              (|)  *
-	 *                        */
-	{ 0x1c, KEY_RADIO },	/*XXX*/
-	{ 0x12, KEY_POWER },
-
-	/*  0x01    0x02    0x03  *
-	 *   1       2       3    *
-	 *                        *
-	 *  0x04    0x05    0x06  *
-	 *   4       5       6    *
-	 *                        *
-	 *  0x07    0x08    0x09  *
-	 *   7       8       9    *
-	 *                        */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	/*  0x0a    0x00    0x17  *
-	 * RECALL    0      +100  *
-	 *                  PLUS  *
-	 *                        */
-	{ 0x0a, KEY_AGAIN },	/*XXX KEY_REWIND? */
-	{ 0x00, KEY_0 },
-	{ 0x17, KEY_DIGITS },	/*XXX*/
-
-	/*  0x14            0x10  *
-	 *  MENU            INFO  *
-	 *  OSD                   */
-	{ 0x14, KEY_MENU },
-	{ 0x10, KEY_INFO },
-
-	/*          0x0b          *
-	 *           Up           *
-	 *                        *
-	 *  0x18    0x16    0x0c  *
-	 *  Left     Ok     Right *
-	 *                        *
-	 *         0x015          *
-	 *         Down           *
-	 *                        */
-	{ 0x0b, KEY_UP },
-	{ 0x18, KEY_LEFT },
-	{ 0x16, KEY_OK },	/*XXX KEY_SELECT? KEY_ENTER? */
-	{ 0x0c, KEY_RIGHT },
-	{ 0x15, KEY_DOWN },
-
-	/*  0x11            0x0d  *
-	 *  TV/AV           MODE  *
-	 *  SOURCE         STEREO *
-	 *                        */
-	{ 0x11, KEY_TV },	/*XXX*/
-	{ 0x0d, KEY_MODE },	/*XXX there's no KEY_STEREO	*/
-
-	/*  0x0f    0x1b    0x1a  *
-	 *  AUDIO   Vol+    Chan+ *
-	 *        TIMESHIFT???    *
-	 *                        *
-	 *  0x0e    0x1f    0x1e  *
-	 *  SLEEP   Vol-    Chan- *
-	 *                        */
-	{ 0x0f, KEY_AUDIO },
-	{ 0x1b, KEY_VOLUMEUP },
-	{ 0x1a, KEY_CHANNELUP },
-	{ 0x0e, KEY_TIME },
-	{ 0x1f, KEY_VOLUMEDOWN },
-	{ 0x1e, KEY_CHANNELDOWN },
-
-	/*         0x13     0x19  *
-	 *         MUTE   SNAPSHOT*
-	 *                        */
-	{ 0x13, KEY_MUTE },
-	{ 0x19, KEY_CAMERA },
-
-	/* 0x1d unused ? */
-};
-
-static struct rc_keymap manli_map = {
-	.map = {
-		.scan    = manli,
-		.size    = ARRAY_SIZE(manli),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_MANLI,
-	}
-};
-
-static int __init init_rc_map_manli(void)
-{
-	return ir_register_map(&manli_map);
-}
-
-static void __exit exit_rc_map_manli(void)
-{
-	ir_unregister_map(&manli_map);
-}
-
-module_init(init_rc_map_manli)
-module_exit(exit_rc_map_manli)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-msi-digivox-ii.c b/drivers/media/IR/keymaps/rc-msi-digivox-ii.c
deleted file mode 100644
index 67237fbf9e4b..000000000000
--- a/drivers/media/IR/keymaps/rc-msi-digivox-ii.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * MSI DIGIVOX mini II remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode msi_digivox_ii[] = {
-	{ 0x0002, KEY_2 },
-	{ 0x0003, KEY_UP },              /* up */
-	{ 0x0004, KEY_3 },
-	{ 0x0005, KEY_CHANNELDOWN },
-	{ 0x0008, KEY_5 },
-	{ 0x0009, KEY_0 },
-	{ 0x000b, KEY_8 },
-	{ 0x000d, KEY_DOWN },            /* down */
-	{ 0x0010, KEY_9 },
-	{ 0x0011, KEY_7 },
-	{ 0x0014, KEY_VOLUMEUP },
-	{ 0x0015, KEY_CHANNELUP },
-	{ 0x0016, KEY_OK },
-	{ 0x0017, KEY_POWER2 },
-	{ 0x001a, KEY_1 },
-	{ 0x001c, KEY_4 },
-	{ 0x001d, KEY_6 },
-	{ 0x001f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap msi_digivox_ii_map = {
-	.map = {
-		.scan    = msi_digivox_ii,
-		.size    = ARRAY_SIZE(msi_digivox_ii),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_MSI_DIGIVOX_II,
-	}
-};
-
-static int __init init_rc_map_msi_digivox_ii(void)
-{
-	return ir_register_map(&msi_digivox_ii_map);
-}
-
-static void __exit exit_rc_map_msi_digivox_ii(void)
-{
-	ir_unregister_map(&msi_digivox_ii_map);
-}
-
-module_init(init_rc_map_msi_digivox_ii)
-module_exit(exit_rc_map_msi_digivox_ii)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-msi-digivox-iii.c b/drivers/media/IR/keymaps/rc-msi-digivox-iii.c
deleted file mode 100644
index 882056e52ef9..000000000000
--- a/drivers/media/IR/keymaps/rc-msi-digivox-iii.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * MSI DIGIVOX mini III remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* MSI DIGIVOX mini III */
-/* Uses NEC extended 0x61d6. */
-/* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
-   since rc-kworld-315u.c lacks NEC extended address byte. */
-static struct ir_scancode msi_digivox_iii[] = {
-	{ 0x61d601, KEY_VIDEO },           /* Source */
-	{ 0x61d602, KEY_3 },
-	{ 0x61d603, KEY_POWER },           /* ShutDown */
-	{ 0x61d604, KEY_1 },
-	{ 0x61d605, KEY_5 },
-	{ 0x61d606, KEY_6 },
-	{ 0x61d607, KEY_CHANNELDOWN },     /* CH- */
-	{ 0x61d608, KEY_2 },
-	{ 0x61d609, KEY_CHANNELUP },       /* CH+ */
-	{ 0x61d60a, KEY_9 },
-	{ 0x61d60b, KEY_ZOOM },            /* Zoom */
-	{ 0x61d60c, KEY_7 },
-	{ 0x61d60d, KEY_8 },
-	{ 0x61d60e, KEY_VOLUMEUP },        /* Vol+ */
-	{ 0x61d60f, KEY_4 },
-	{ 0x61d610, KEY_ESC },             /* [back up arrow] */
-	{ 0x61d611, KEY_0 },
-	{ 0x61d612, KEY_OK },              /* [enter arrow] */
-	{ 0x61d613, KEY_VOLUMEDOWN },      /* Vol- */
-	{ 0x61d614, KEY_RECORD },          /* Rec */
-	{ 0x61d615, KEY_STOP },            /* Stop */
-	{ 0x61d616, KEY_PLAY },            /* Play */
-	{ 0x61d617, KEY_MUTE },            /* Mute */
-	{ 0x61d618, KEY_UP },
-	{ 0x61d619, KEY_DOWN },
-	{ 0x61d61a, KEY_LEFT },
-	{ 0x61d61b, KEY_RIGHT },
-	{ 0x61d61c, KEY_RED },
-	{ 0x61d61d, KEY_GREEN },
-	{ 0x61d61e, KEY_YELLOW },
-	{ 0x61d61f, KEY_BLUE },
-	{ 0x61d643, KEY_POWER2 },          /* [red power button] */
-};
-
-static struct rc_keymap msi_digivox_iii_map = {
-	.map = {
-		.scan    = msi_digivox_iii,
-		.size    = ARRAY_SIZE(msi_digivox_iii),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_MSI_DIGIVOX_III,
-	}
-};
-
-static int __init init_rc_map_msi_digivox_iii(void)
-{
-	return ir_register_map(&msi_digivox_iii_map);
-}
-
-static void __exit exit_rc_map_msi_digivox_iii(void)
-{
-	ir_unregister_map(&msi_digivox_iii_map);
-}
-
-module_init(init_rc_map_msi_digivox_iii)
-module_exit(exit_rc_map_msi_digivox_iii)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c
deleted file mode 100644
index eb8e42c18ff9..000000000000
--- a/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
-  Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
-  is marked "KS003". The controller is I2C at address 0x30, but does not seem
-  to respond to probes until a read is performed from a valid device.
-  I don't know why...
-
-  Note: This remote may be of similar or identical design to the
-  Pixelview remote (?).  The raw codes and duplicate button codes
-  appear to be the same.
-
-  Henry Wong <henry@stuffedcow.net>
-  Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
-*/
-
-static struct ir_scancode msi_tvanywhere_plus[] = {
-
-/*  ---- Remote Button Layout ----
-
-    POWER   SOURCE  SCAN    MUTE
-    TV/FM   1       2       3
-    |>      4       5       6
-    <|      7       8       9
-    ^^UP    0       +       RECALL
-    vvDN    RECORD  STOP    PLAY
-
-	MINIMIZE          ZOOM
-
-		  CH+
-      VOL-                   VOL+
-		  CH-
-
-	SNAPSHOT           MTS
-
-     <<      FUNC    >>     RESET
-*/
-
-	{ 0x01, KEY_1 },		/* 1 */
-	{ 0x0b, KEY_2 },		/* 2 */
-	{ 0x1b, KEY_3 },		/* 3 */
-	{ 0x05, KEY_4 },		/* 4 */
-	{ 0x09, KEY_5 },		/* 5 */
-	{ 0x15, KEY_6 },		/* 6 */
-	{ 0x06, KEY_7 },		/* 7 */
-	{ 0x0a, KEY_8 },		/* 8 */
-	{ 0x12, KEY_9 },		/* 9 */
-	{ 0x02, KEY_0 },		/* 0 */
-	{ 0x10, KEY_KPPLUS },		/* + */
-	{ 0x13, KEY_AGAIN },		/* Recall */
-
-	{ 0x1e, KEY_POWER },		/* Power */
-	{ 0x07, KEY_TUNER },		/* Source */
-	{ 0x1c, KEY_SEARCH },		/* Scan */
-	{ 0x18, KEY_MUTE },		/* Mute */
-
-	{ 0x03, KEY_RADIO },		/* TV/FM */
-	/* The next four keys are duplicates that appear to send the
-	   same IR code as Ch+, Ch-, >>, and << .  The raw code assigned
-	   to them is the actual code + 0x20 - they will never be
-	   detected as such unless some way is discovered to distinguish
-	   these buttons from those that have the same code. */
-	{ 0x3f, KEY_RIGHT },		/* |> and Ch+ */
-	{ 0x37, KEY_LEFT },		/* <| and Ch- */
-	{ 0x2c, KEY_UP },		/* ^^Up and >> */
-	{ 0x24, KEY_DOWN },		/* vvDn and << */
-
-	{ 0x00, KEY_RECORD },		/* Record */
-	{ 0x08, KEY_STOP },		/* Stop */
-	{ 0x11, KEY_PLAY },		/* Play */
-
-	{ 0x0f, KEY_CLOSE },		/* Minimize */
-	{ 0x19, KEY_ZOOM },		/* Zoom */
-	{ 0x1a, KEY_CAMERA },		/* Snapshot */
-	{ 0x0d, KEY_LANGUAGE },		/* MTS */
-
-	{ 0x14, KEY_VOLUMEDOWN },	/* Vol- */
-	{ 0x16, KEY_VOLUMEUP },		/* Vol+ */
-	{ 0x17, KEY_CHANNELDOWN },	/* Ch- */
-	{ 0x1f, KEY_CHANNELUP },	/* Ch+ */
-
-	{ 0x04, KEY_REWIND },		/* << */
-	{ 0x0e, KEY_MENU },		/* Function */
-	{ 0x0c, KEY_FASTFORWARD },	/* >> */
-	{ 0x1d, KEY_RESTART },		/* Reset */
-};
-
-static struct rc_keymap msi_tvanywhere_plus_map = {
-	.map = {
-		.scan    = msi_tvanywhere_plus,
-		.size    = ARRAY_SIZE(msi_tvanywhere_plus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_MSI_TVANYWHERE_PLUS,
-	}
-};
-
-static int __init init_rc_map_msi_tvanywhere_plus(void)
-{
-	return ir_register_map(&msi_tvanywhere_plus_map);
-}
-
-static void __exit exit_rc_map_msi_tvanywhere_plus(void)
-{
-	ir_unregister_map(&msi_tvanywhere_plus_map);
-}
-
-module_init(init_rc_map_msi_tvanywhere_plus)
-module_exit(exit_rc_map_msi_tvanywhere_plus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere.c b/drivers/media/IR/keymaps/rc-msi-tvanywhere.c
deleted file mode 100644
index ef411854f067..000000000000
--- a/drivers/media/IR/keymaps/rc-msi-tvanywhere.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* MSI TV@nywhere MASTER remote */
-
-static struct ir_scancode msi_tvanywhere[] = {
-	/* Keys 0 to 9 */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0c, KEY_MUTE },
-	{ 0x0f, KEY_SCREEN },		/* Full Screen */
-	{ 0x10, KEY_FN },		/* Funtion */
-	{ 0x11, KEY_TIME },		/* Time shift */
-	{ 0x12, KEY_POWER },
-	{ 0x13, KEY_MEDIA },		/* MTS */
-	{ 0x14, KEY_SLOW },
-	{ 0x16, KEY_REWIND },		/* backward << */
-	{ 0x17, KEY_ENTER },		/* Return */
-	{ 0x18, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x1a, KEY_CHANNELUP },
-	{ 0x1b, KEY_VOLUMEUP },
-	{ 0x1e, KEY_CHANNELDOWN },
-	{ 0x1f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap msi_tvanywhere_map = {
-	.map = {
-		.scan    = msi_tvanywhere,
-		.size    = ARRAY_SIZE(msi_tvanywhere),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_MSI_TVANYWHERE,
-	}
-};
-
-static int __init init_rc_map_msi_tvanywhere(void)
-{
-	return ir_register_map(&msi_tvanywhere_map);
-}
-
-static void __exit exit_rc_map_msi_tvanywhere(void)
-{
-	ir_unregister_map(&msi_tvanywhere_map);
-}
-
-module_init(init_rc_map_msi_tvanywhere)
-module_exit(exit_rc_map_msi_tvanywhere)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-nebula.c b/drivers/media/IR/keymaps/rc-nebula.c
deleted file mode 100644
index ccc50eb402ec..000000000000
--- a/drivers/media/IR/keymaps/rc-nebula.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* nebula.h - Keytable for nebula Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode nebula[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x0a, KEY_TV },
-	{ 0x0b, KEY_AUX },
-	{ 0x0c, KEY_DVD },
-	{ 0x0d, KEY_POWER },
-	{ 0x0e, KEY_MHP },	/* labelled 'Picture' */
-	{ 0x0f, KEY_AUDIO },
-	{ 0x10, KEY_INFO },
-	{ 0x11, KEY_F13 },	/* 16:9 */
-	{ 0x12, KEY_F14 },	/* 14:9 */
-	{ 0x13, KEY_EPG },
-	{ 0x14, KEY_EXIT },
-	{ 0x15, KEY_MENU },
-	{ 0x16, KEY_UP },
-	{ 0x17, KEY_DOWN },
-	{ 0x18, KEY_LEFT },
-	{ 0x19, KEY_RIGHT },
-	{ 0x1a, KEY_ENTER },
-	{ 0x1b, KEY_CHANNELUP },
-	{ 0x1c, KEY_CHANNELDOWN },
-	{ 0x1d, KEY_VOLUMEUP },
-	{ 0x1e, KEY_VOLUMEDOWN },
-	{ 0x1f, KEY_RED },
-	{ 0x20, KEY_GREEN },
-	{ 0x21, KEY_YELLOW },
-	{ 0x22, KEY_BLUE },
-	{ 0x23, KEY_SUBTITLE },
-	{ 0x24, KEY_F15 },	/* AD */
-	{ 0x25, KEY_TEXT },
-	{ 0x26, KEY_MUTE },
-	{ 0x27, KEY_REWIND },
-	{ 0x28, KEY_STOP },
-	{ 0x29, KEY_PLAY },
-	{ 0x2a, KEY_FASTFORWARD },
-	{ 0x2b, KEY_F16 },	/* chapter */
-	{ 0x2c, KEY_PAUSE },
-	{ 0x2d, KEY_PLAY },
-	{ 0x2e, KEY_RECORD },
-	{ 0x2f, KEY_F17 },	/* picture in picture */
-	{ 0x30, KEY_KPPLUS },	/* zoom in */
-	{ 0x31, KEY_KPMINUS },	/* zoom out */
-	{ 0x32, KEY_F18 },	/* capture */
-	{ 0x33, KEY_F19 },	/* web */
-	{ 0x34, KEY_EMAIL },
-	{ 0x35, KEY_PHONE },
-	{ 0x36, KEY_PC },
-};
-
-static struct rc_keymap nebula_map = {
-	.map = {
-		.scan    = nebula,
-		.size    = ARRAY_SIZE(nebula),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_NEBULA,
-	}
-};
-
-static int __init init_rc_map_nebula(void)
-{
-	return ir_register_map(&nebula_map);
-}
-
-static void __exit exit_rc_map_nebula(void)
-{
-	ir_unregister_map(&nebula_map);
-}
-
-module_init(init_rc_map_nebula)
-module_exit(exit_rc_map_nebula)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c
deleted file mode 100644
index e1b54d20db60..000000000000
--- a/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Terratec Cinergy Hybrid T USB XS FM
-   Mauro Carvalho Chehab <mchehab@redhat.com>
- */
-
-static struct ir_scancode nec_terratec_cinergy_xs[] = {
-	{ 0x1441, KEY_HOME},
-	{ 0x1401, KEY_POWER2},
-
-	{ 0x1442, KEY_MENU},		/* DVD menu */
-	{ 0x1443, KEY_SUBTITLE},
-	{ 0x1444, KEY_TEXT},		/* Teletext */
-	{ 0x1445, KEY_DELETE},
-
-	{ 0x1402, KEY_1},
-	{ 0x1403, KEY_2},
-	{ 0x1404, KEY_3},
-	{ 0x1405, KEY_4},
-	{ 0x1406, KEY_5},
-	{ 0x1407, KEY_6},
-	{ 0x1408, KEY_7},
-	{ 0x1409, KEY_8},
-	{ 0x140a, KEY_9},
-	{ 0x140c, KEY_0},
-
-	{ 0x140b, KEY_TUNER},		/* AV */
-	{ 0x140d, KEY_MODE},		/* A.B */
-
-	{ 0x1446, KEY_TV},
-	{ 0x1447, KEY_DVD},
-	{ 0x1449, KEY_VIDEO},
-	{ 0x144a, KEY_RADIO},		/* Music */
-	{ 0x144b, KEY_CAMERA},		/* PIC */
-
-	{ 0x1410, KEY_UP},
-	{ 0x1411, KEY_LEFT},
-	{ 0x1412, KEY_OK},
-	{ 0x1413, KEY_RIGHT},
-	{ 0x1414, KEY_DOWN},
-
-	{ 0x140f, KEY_EPG},
-	{ 0x1416, KEY_INFO},
-	{ 0x144d, KEY_BACKSPACE},
-
-	{ 0x141c, KEY_VOLUMEUP},
-	{ 0x141e, KEY_VOLUMEDOWN},
-
-	{ 0x144c, KEY_PLAY},
-	{ 0x141d, KEY_MUTE},
-
-	{ 0x141b, KEY_CHANNELUP},
-	{ 0x141f, KEY_CHANNELDOWN},
-
-	{ 0x1417, KEY_RED},
-	{ 0x1418, KEY_GREEN},
-	{ 0x1419, KEY_YELLOW},
-	{ 0x141a, KEY_BLUE},
-
-	{ 0x1458, KEY_RECORD},
-	{ 0x1448, KEY_STOP},
-	{ 0x1440, KEY_PAUSE},
-
-	{ 0x1454, KEY_LAST},
-	{ 0x144e, KEY_REWIND},
-	{ 0x144f, KEY_FASTFORWARD},
-	{ 0x145c, KEY_NEXT},
-};
-
-static struct rc_keymap nec_terratec_cinergy_xs_map = {
-	.map = {
-		.scan    = nec_terratec_cinergy_xs,
-		.size    = ARRAY_SIZE(nec_terratec_cinergy_xs),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_NEC_TERRATEC_CINERGY_XS,
-	}
-};
-
-static int __init init_rc_map_nec_terratec_cinergy_xs(void)
-{
-	return ir_register_map(&nec_terratec_cinergy_xs_map);
-}
-
-static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
-{
-	ir_unregister_map(&nec_terratec_cinergy_xs_map);
-}
-
-module_init(init_rc_map_nec_terratec_cinergy_xs)
-module_exit(exit_rc_map_nec_terratec_cinergy_xs)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-norwood.c b/drivers/media/IR/keymaps/rc-norwood.c
deleted file mode 100644
index e5849a6b3f05..000000000000
--- a/drivers/media/IR/keymaps/rc-norwood.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* norwood.h - Keytable for norwood Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Norwood Micro (non-Pro) TV Tuner
-   By Peter Naulls <peter@chocky.org>
-   Key comments are the functions given in the manual */
-
-static struct ir_scancode norwood[] = {
-	/* Keys 0 to 9 */
-	{ 0x20, KEY_0 },
-	{ 0x21, KEY_1 },
-	{ 0x22, KEY_2 },
-	{ 0x23, KEY_3 },
-	{ 0x24, KEY_4 },
-	{ 0x25, KEY_5 },
-	{ 0x26, KEY_6 },
-	{ 0x27, KEY_7 },
-	{ 0x28, KEY_8 },
-	{ 0x29, KEY_9 },
-
-	{ 0x78, KEY_TUNER },		/* Video Source        */
-	{ 0x2c, KEY_EXIT },		/* Open/Close software */
-	{ 0x2a, KEY_SELECT },		/* 2 Digit Select      */
-	{ 0x69, KEY_AGAIN },		/* Recall              */
-
-	{ 0x32, KEY_BRIGHTNESSUP },	/* Brightness increase */
-	{ 0x33, KEY_BRIGHTNESSDOWN },	/* Brightness decrease */
-	{ 0x6b, KEY_KPPLUS },		/* (not named >>>>>)   */
-	{ 0x6c, KEY_KPMINUS },		/* (not named <<<<<)   */
-
-	{ 0x2d, KEY_MUTE },		/* Mute                */
-	{ 0x30, KEY_VOLUMEUP },		/* Volume up           */
-	{ 0x31, KEY_VOLUMEDOWN },	/* Volume down         */
-	{ 0x60, KEY_CHANNELUP },	/* Channel up          */
-	{ 0x61, KEY_CHANNELDOWN },	/* Channel down        */
-
-	{ 0x3f, KEY_RECORD },		/* Record              */
-	{ 0x37, KEY_PLAY },		/* Play                */
-	{ 0x36, KEY_PAUSE },		/* Pause               */
-	{ 0x2b, KEY_STOP },		/* Stop                */
-	{ 0x67, KEY_FASTFORWARD },	/* Foward              */
-	{ 0x66, KEY_REWIND },		/* Rewind              */
-	{ 0x3e, KEY_SEARCH },		/* Auto Scan           */
-	{ 0x2e, KEY_CAMERA },		/* Capture Video       */
-	{ 0x6d, KEY_MENU },		/* Show/Hide Control   */
-	{ 0x2f, KEY_ZOOM },		/* Full Screen         */
-	{ 0x34, KEY_RADIO },		/* FM                  */
-	{ 0x65, KEY_POWER },		/* Computer power      */
-};
-
-static struct rc_keymap norwood_map = {
-	.map = {
-		.scan    = norwood,
-		.size    = ARRAY_SIZE(norwood),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_NORWOOD,
-	}
-};
-
-static int __init init_rc_map_norwood(void)
-{
-	return ir_register_map(&norwood_map);
-}
-
-static void __exit exit_rc_map_norwood(void)
-{
-	ir_unregister_map(&norwood_map);
-}
-
-module_init(init_rc_map_norwood)
-module_exit(exit_rc_map_norwood)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-npgtech.c b/drivers/media/IR/keymaps/rc-npgtech.c
deleted file mode 100644
index b9ece1e90296..000000000000
--- a/drivers/media/IR/keymaps/rc-npgtech.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* npgtech.h - Keytable for npgtech Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode npgtech[] = {
-	{ 0x1d, KEY_SWITCHVIDEOMODE },	/* switch inputs */
-	{ 0x2a, KEY_FRONT },
-
-	{ 0x3e, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x06, KEY_3 },
-	{ 0x0a, KEY_4 },
-	{ 0x0e, KEY_5 },
-	{ 0x12, KEY_6 },
-	{ 0x16, KEY_7 },
-	{ 0x1a, KEY_8 },
-	{ 0x1e, KEY_9 },
-	{ 0x3a, KEY_0 },
-	{ 0x22, KEY_NUMLOCK },		/* -/-- */
-	{ 0x20, KEY_REFRESH },
-
-	{ 0x03, KEY_BRIGHTNESSDOWN },
-	{ 0x28, KEY_AUDIO },
-	{ 0x3c, KEY_CHANNELUP },
-	{ 0x3f, KEY_VOLUMEDOWN },
-	{ 0x2e, KEY_MUTE },
-	{ 0x3b, KEY_VOLUMEUP },
-	{ 0x00, KEY_CHANNELDOWN },
-	{ 0x07, KEY_BRIGHTNESSUP },
-	{ 0x2c, KEY_TEXT },
-
-	{ 0x37, KEY_RECORD },
-	{ 0x17, KEY_PLAY },
-	{ 0x13, KEY_PAUSE },
-	{ 0x26, KEY_STOP },
-	{ 0x18, KEY_FASTFORWARD },
-	{ 0x14, KEY_REWIND },
-	{ 0x33, KEY_ZOOM },
-	{ 0x32, KEY_KEYBOARD },
-	{ 0x30, KEY_GOTO },		/* Pointing arrow */
-	{ 0x36, KEY_MACRO },		/* Maximize/Minimize (yellow) */
-	{ 0x0b, KEY_RADIO },
-	{ 0x10, KEY_POWER },
-
-};
-
-static struct rc_keymap npgtech_map = {
-	.map = {
-		.scan    = npgtech,
-		.size    = ARRAY_SIZE(npgtech),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_NPGTECH,
-	}
-};
-
-static int __init init_rc_map_npgtech(void)
-{
-	return ir_register_map(&npgtech_map);
-}
-
-static void __exit exit_rc_map_npgtech(void)
-{
-	ir_unregister_map(&npgtech_map);
-}
-
-module_init(init_rc_map_npgtech)
-module_exit(exit_rc_map_npgtech)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pctv-sedna.c b/drivers/media/IR/keymaps/rc-pctv-sedna.c
deleted file mode 100644
index 4129bb44a25b..000000000000
--- a/drivers/media/IR/keymaps/rc-pctv-sedna.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mapping for the 28 key remote control as seen at
-   http://www.sednacomputer.com/photo/cardbus-tv.jpg
-   Pavel Mihaylov <bin@bash.info>
-   Also for the remote bundled with Kozumi KTV-01C card */
-
-static struct ir_scancode pctv_sedna[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0a, KEY_AGAIN },	/* Recall */
-	{ 0x0b, KEY_CHANNELUP },
-	{ 0x0c, KEY_VOLUMEUP },
-	{ 0x0d, KEY_MODE },	/* Stereo */
-	{ 0x0e, KEY_STOP },
-	{ 0x0f, KEY_PREVIOUSSONG },
-	{ 0x10, KEY_ZOOM },
-	{ 0x11, KEY_TUNER },	/* Source */
-	{ 0x12, KEY_POWER },
-	{ 0x13, KEY_MUTE },
-	{ 0x15, KEY_CHANNELDOWN },
-	{ 0x18, KEY_VOLUMEDOWN },
-	{ 0x19, KEY_CAMERA },	/* Snapshot */
-	{ 0x1a, KEY_NEXTSONG },
-	{ 0x1b, KEY_TIME },	/* Time Shift */
-	{ 0x1c, KEY_RADIO },	/* FM Radio */
-	{ 0x1d, KEY_RECORD },
-	{ 0x1e, KEY_PAUSE },
-	/* additional codes for Kozumi's remote */
-	{ 0x14, KEY_INFO },	/* OSD */
-	{ 0x16, KEY_OK },	/* OK */
-	{ 0x17, KEY_DIGITS },	/* Plus */
-	{ 0x1f, KEY_PLAY },	/* Play */
-};
-
-static struct rc_keymap pctv_sedna_map = {
-	.map = {
-		.scan    = pctv_sedna,
-		.size    = ARRAY_SIZE(pctv_sedna),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PCTV_SEDNA,
-	}
-};
-
-static int __init init_rc_map_pctv_sedna(void)
-{
-	return ir_register_map(&pctv_sedna_map);
-}
-
-static void __exit exit_rc_map_pctv_sedna(void)
-{
-	ir_unregister_map(&pctv_sedna_map);
-}
-
-module_init(init_rc_map_pctv_sedna)
-module_exit(exit_rc_map_pctv_sedna)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-color.c b/drivers/media/IR/keymaps/rc-pinnacle-color.c
deleted file mode 100644
index 326e023ce126..000000000000
--- a/drivers/media/IR/keymaps/rc-pinnacle-color.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pinnacle_color[] = {
-	{ 0x59, KEY_MUTE },
-	{ 0x4a, KEY_POWER },
-
-	{ 0x18, KEY_TEXT },
-	{ 0x26, KEY_TV },
-	{ 0x3d, KEY_PRINT },
-
-	{ 0x48, KEY_RED },
-	{ 0x04, KEY_GREEN },
-	{ 0x11, KEY_YELLOW },
-	{ 0x00, KEY_BLUE },
-
-	{ 0x2d, KEY_VOLUMEUP },
-	{ 0x1e, KEY_VOLUMEDOWN },
-
-	{ 0x49, KEY_MENU },
-
-	{ 0x16, KEY_CHANNELUP },
-	{ 0x17, KEY_CHANNELDOWN },
-
-	{ 0x20, KEY_UP },
-	{ 0x21, KEY_DOWN },
-	{ 0x22, KEY_LEFT },
-	{ 0x23, KEY_RIGHT },
-	{ 0x0d, KEY_SELECT },
-
-	{ 0x08, KEY_BACK },
-	{ 0x07, KEY_REFRESH },
-
-	{ 0x2f, KEY_ZOOM },
-	{ 0x29, KEY_RECORD },
-
-	{ 0x4b, KEY_PAUSE },
-	{ 0x4d, KEY_REWIND },
-	{ 0x2e, KEY_PLAY },
-	{ 0x4e, KEY_FORWARD },
-	{ 0x53, KEY_PREVIOUS },
-	{ 0x4c, KEY_STOP },
-	{ 0x54, KEY_NEXT },
-
-	{ 0x69, KEY_0 },
-	{ 0x6a, KEY_1 },
-	{ 0x6b, KEY_2 },
-	{ 0x6c, KEY_3 },
-	{ 0x6d, KEY_4 },
-	{ 0x6e, KEY_5 },
-	{ 0x6f, KEY_6 },
-	{ 0x70, KEY_7 },
-	{ 0x71, KEY_8 },
-	{ 0x72, KEY_9 },
-
-	{ 0x74, KEY_CHANNEL },
-	{ 0x0a, KEY_BACKSPACE },
-};
-
-static struct rc_keymap pinnacle_color_map = {
-	.map = {
-		.scan    = pinnacle_color,
-		.size    = ARRAY_SIZE(pinnacle_color),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PINNACLE_COLOR,
-	}
-};
-
-static int __init init_rc_map_pinnacle_color(void)
-{
-	return ir_register_map(&pinnacle_color_map);
-}
-
-static void __exit exit_rc_map_pinnacle_color(void)
-{
-	ir_unregister_map(&pinnacle_color_map);
-}
-
-module_init(init_rc_map_pinnacle_color)
-module_exit(exit_rc_map_pinnacle_color)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-grey.c b/drivers/media/IR/keymaps/rc-pinnacle-grey.c
deleted file mode 100644
index 14cb772515c6..000000000000
--- a/drivers/media/IR/keymaps/rc-pinnacle-grey.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pinnacle_grey[] = {
-	{ 0x3a, KEY_0 },
-	{ 0x31, KEY_1 },
-	{ 0x32, KEY_2 },
-	{ 0x33, KEY_3 },
-	{ 0x34, KEY_4 },
-	{ 0x35, KEY_5 },
-	{ 0x36, KEY_6 },
-	{ 0x37, KEY_7 },
-	{ 0x38, KEY_8 },
-	{ 0x39, KEY_9 },
-
-	{ 0x2f, KEY_POWER },
-
-	{ 0x2e, KEY_P },
-	{ 0x1f, KEY_L },
-	{ 0x2b, KEY_I },
-
-	{ 0x2d, KEY_SCREEN },
-	{ 0x1e, KEY_ZOOM },
-	{ 0x1b, KEY_VOLUMEUP },
-	{ 0x0f, KEY_VOLUMEDOWN },
-	{ 0x17, KEY_CHANNELUP },
-	{ 0x1c, KEY_CHANNELDOWN },
-	{ 0x25, KEY_INFO },
-
-	{ 0x3c, KEY_MUTE },
-
-	{ 0x3d, KEY_LEFT },
-	{ 0x3b, KEY_RIGHT },
-
-	{ 0x3f, KEY_UP },
-	{ 0x3e, KEY_DOWN },
-	{ 0x1a, KEY_ENTER },
-
-	{ 0x1d, KEY_MENU },
-	{ 0x19, KEY_AGAIN },
-	{ 0x16, KEY_PREVIOUSSONG },
-	{ 0x13, KEY_NEXTSONG },
-	{ 0x15, KEY_PAUSE },
-	{ 0x0e, KEY_REWIND },
-	{ 0x0d, KEY_PLAY },
-	{ 0x0b, KEY_STOP },
-	{ 0x07, KEY_FORWARD },
-	{ 0x27, KEY_RECORD },
-	{ 0x26, KEY_TUNER },
-	{ 0x29, KEY_TEXT },
-	{ 0x2a, KEY_MEDIA },
-	{ 0x18, KEY_EPG },
-};
-
-static struct rc_keymap pinnacle_grey_map = {
-	.map = {
-		.scan    = pinnacle_grey,
-		.size    = ARRAY_SIZE(pinnacle_grey),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PINNACLE_GREY,
-	}
-};
-
-static int __init init_rc_map_pinnacle_grey(void)
-{
-	return ir_register_map(&pinnacle_grey_map);
-}
-
-static void __exit exit_rc_map_pinnacle_grey(void)
-{
-	ir_unregister_map(&pinnacle_grey_map);
-}
-
-module_init(init_rc_map_pinnacle_grey)
-module_exit(exit_rc_map_pinnacle_grey)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c
deleted file mode 100644
index 835bf4ef8de7..000000000000
--- a/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Pinnacle PCTV HD 800i mini remote */
-
-static struct ir_scancode pinnacle_pctv_hd[] = {
-
-	{ 0x0f, KEY_1 },
-	{ 0x15, KEY_2 },
-	{ 0x10, KEY_3 },
-	{ 0x18, KEY_4 },
-	{ 0x1b, KEY_5 },
-	{ 0x1e, KEY_6 },
-	{ 0x11, KEY_7 },
-	{ 0x21, KEY_8 },
-	{ 0x12, KEY_9 },
-	{ 0x27, KEY_0 },
-
-	{ 0x24, KEY_ZOOM },
-	{ 0x2a, KEY_SUBTITLE },
-
-	{ 0x00, KEY_MUTE },
-	{ 0x01, KEY_ENTER },	/* Pinnacle Logo */
-	{ 0x39, KEY_POWER },
-
-	{ 0x03, KEY_VOLUMEUP },
-	{ 0x09, KEY_VOLUMEDOWN },
-	{ 0x06, KEY_CHANNELUP },
-	{ 0x0c, KEY_CHANNELDOWN },
-
-	{ 0x2d, KEY_REWIND },
-	{ 0x30, KEY_PLAYPAUSE },
-	{ 0x33, KEY_FASTFORWARD },
-	{ 0x3c, KEY_STOP },
-	{ 0x36, KEY_RECORD },
-	{ 0x3f, KEY_EPG },	/* Labeled "?" */
-};
-
-static struct rc_keymap pinnacle_pctv_hd_map = {
-	.map = {
-		.scan    = pinnacle_pctv_hd,
-		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PINNACLE_PCTV_HD,
-	}
-};
-
-static int __init init_rc_map_pinnacle_pctv_hd(void)
-{
-	return ir_register_map(&pinnacle_pctv_hd_map);
-}
-
-static void __exit exit_rc_map_pinnacle_pctv_hd(void)
-{
-	ir_unregister_map(&pinnacle_pctv_hd_map);
-}
-
-module_init(init_rc_map_pinnacle_pctv_hd)
-module_exit(exit_rc_map_pinnacle_pctv_hd)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pixelview-mk12.c b/drivers/media/IR/keymaps/rc-pixelview-mk12.c
deleted file mode 100644
index 5a735d569a8b..000000000000
--- a/drivers/media/IR/keymaps/rc-pixelview-mk12.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Keytable for MK-F12 IR remote provided together with Pixelview
- * Ultra Pro Remote Controller. Uses NEC extended format.
- */
-static struct ir_scancode pixelview_mk12[] = {
-	{ 0x866b03, KEY_TUNER },	/* Timeshift */
-	{ 0x866b1e, KEY_POWER2 },	/* power */
-
-	{ 0x866b01, KEY_1 },
-	{ 0x866b0b, KEY_2 },
-	{ 0x866b1b, KEY_3 },
-	{ 0x866b05, KEY_4 },
-	{ 0x866b09, KEY_5 },
-	{ 0x866b15, KEY_6 },
-	{ 0x866b06, KEY_7 },
-	{ 0x866b0a, KEY_8 },
-	{ 0x866b12, KEY_9 },
-	{ 0x866b02, KEY_0 },
-
-	{ 0x866b13, KEY_AGAIN },	/* loop */
-	{ 0x866b10, KEY_DIGITS },	/* +100 */
-
-	{ 0x866b00, KEY_MEDIA },	/* source */
-	{ 0x866b18, KEY_MUTE },		/* mute */
-	{ 0x866b19, KEY_CAMERA },	/* snapshot */
-	{ 0x866b1a, KEY_SEARCH },	/* scan */
-
-	{ 0x866b16, KEY_CHANNELUP },	/* chn + */
-	{ 0x866b14, KEY_CHANNELDOWN },	/* chn - */
-	{ 0x866b1f, KEY_VOLUMEUP },	/* vol + */
-	{ 0x866b17, KEY_VOLUMEDOWN },	/* vol - */
-	{ 0x866b1c, KEY_ZOOM },		/* zoom */
-
-	{ 0x866b04, KEY_REWIND },
-	{ 0x866b0e, KEY_RECORD },
-	{ 0x866b0c, KEY_FORWARD },
-
-	{ 0x866b1d, KEY_STOP },
-	{ 0x866b08, KEY_PLAY },
-	{ 0x866b0f, KEY_PAUSE },
-
-	{ 0x866b0d, KEY_TV },
-	{ 0x866b07, KEY_RADIO },	/* FM */
-};
-
-static struct rc_keymap pixelview_map = {
-	.map = {
-		.scan    = pixelview_mk12,
-		.size    = ARRAY_SIZE(pixelview_mk12),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_PIXELVIEW_MK12,
-	}
-};
-
-static int __init init_rc_map_pixelview(void)
-{
-	return ir_register_map(&pixelview_map);
-}
-
-static void __exit exit_rc_map_pixelview(void)
-{
-	ir_unregister_map(&pixelview_map);
-}
-
-module_init(init_rc_map_pixelview)
-module_exit(exit_rc_map_pixelview)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pixelview-new.c b/drivers/media/IR/keymaps/rc-pixelview-new.c
deleted file mode 100644
index 7bbbbf5735e6..000000000000
--- a/drivers/media/IR/keymaps/rc-pixelview-new.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* pixelview-new.h - Keytable for pixelview_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
-   Mauro Carvalho Chehab <mchehab@infradead.org>
-   present on PV MPEG 8000GT
- */
-
-static struct ir_scancode pixelview_new[] = {
-	{ 0x3c, KEY_TIME },		/* Timeshift */
-	{ 0x12, KEY_POWER },
-
-	{ 0x3d, KEY_1 },
-	{ 0x38, KEY_2 },
-	{ 0x18, KEY_3 },
-	{ 0x35, KEY_4 },
-	{ 0x39, KEY_5 },
-	{ 0x15, KEY_6 },
-	{ 0x36, KEY_7 },
-	{ 0x3a, KEY_8 },
-	{ 0x1e, KEY_9 },
-	{ 0x3e, KEY_0 },
-
-	{ 0x1c, KEY_AGAIN },		/* LOOP	*/
-	{ 0x3f, KEY_MEDIA },		/* Source */
-	{ 0x1f, KEY_LAST },		/* +100 */
-	{ 0x1b, KEY_MUTE },
-
-	{ 0x17, KEY_CHANNELDOWN },
-	{ 0x16, KEY_CHANNELUP },
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x14, KEY_VOLUMEDOWN },
-	{ 0x13, KEY_ZOOM },
-
-	{ 0x19, KEY_CAMERA },		/* SNAPSHOT */
-	{ 0x1a, KEY_SEARCH },		/* scan */
-
-	{ 0x37, KEY_REWIND },		/* << */
-	{ 0x32, KEY_RECORD },		/* o (red) */
-	{ 0x33, KEY_FORWARD },		/* >> */
-	{ 0x11, KEY_STOP },		/* square */
-	{ 0x3b, KEY_PLAY },		/* > */
-	{ 0x30, KEY_PLAYPAUSE },	/* || */
-
-	{ 0x31, KEY_TV },
-	{ 0x34, KEY_RADIO },
-};
-
-static struct rc_keymap pixelview_new_map = {
-	.map = {
-		.scan    = pixelview_new,
-		.size    = ARRAY_SIZE(pixelview_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PIXELVIEW_NEW,
-	}
-};
-
-static int __init init_rc_map_pixelview_new(void)
-{
-	return ir_register_map(&pixelview_new_map);
-}
-
-static void __exit exit_rc_map_pixelview_new(void)
-{
-	ir_unregister_map(&pixelview_new_map);
-}
-
-module_init(init_rc_map_pixelview_new)
-module_exit(exit_rc_map_pixelview_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pixelview.c b/drivers/media/IR/keymaps/rc-pixelview.c
deleted file mode 100644
index 82ff12e182a0..000000000000
--- a/drivers/media/IR/keymaps/rc-pixelview.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* pixelview.h - Keytable for pixelview Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pixelview[] = {
-
-	{ 0x1e, KEY_POWER },	/* power */
-	{ 0x07, KEY_MEDIA },	/* source */
-	{ 0x1c, KEY_SEARCH },	/* scan */
-
-
-	{ 0x03, KEY_TUNER },		/* TV/FM */
-
-	{ 0x00, KEY_RECORD },
-	{ 0x08, KEY_STOP },
-	{ 0x11, KEY_PLAY },
-
-	{ 0x1a, KEY_PLAYPAUSE },	/* freeze */
-	{ 0x19, KEY_ZOOM },		/* zoom */
-	{ 0x0f, KEY_TEXT },		/* min */
-
-	{ 0x01, KEY_1 },
-	{ 0x0b, KEY_2 },
-	{ 0x1b, KEY_3 },
-	{ 0x05, KEY_4 },
-	{ 0x09, KEY_5 },
-	{ 0x15, KEY_6 },
-	{ 0x06, KEY_7 },
-	{ 0x0a, KEY_8 },
-	{ 0x12, KEY_9 },
-	{ 0x02, KEY_0 },
-	{ 0x10, KEY_LAST },		/* +100 */
-	{ 0x13, KEY_LIST },		/* recall */
-
-	{ 0x1f, KEY_CHANNELUP },	/* chn down */
-	{ 0x17, KEY_CHANNELDOWN },	/* chn up */
-	{ 0x16, KEY_VOLUMEUP },		/* vol down */
-	{ 0x14, KEY_VOLUMEDOWN },	/* vol up */
-
-	{ 0x04, KEY_KPMINUS },		/* <<< */
-	{ 0x0e, KEY_SETUP },		/* function */
-	{ 0x0c, KEY_KPPLUS },		/* >>> */
-
-	{ 0x0d, KEY_GOTO },		/* mts */
-	{ 0x1d, KEY_REFRESH },		/* reset */
-	{ 0x18, KEY_MUTE },		/* mute/unmute */
-};
-
-static struct rc_keymap pixelview_map = {
-	.map = {
-		.scan    = pixelview,
-		.size    = ARRAY_SIZE(pixelview),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PIXELVIEW,
-	}
-};
-
-static int __init init_rc_map_pixelview(void)
-{
-	return ir_register_map(&pixelview_map);
-}
-
-static void __exit exit_rc_map_pixelview(void)
-{
-	ir_unregister_map(&pixelview_map);
-}
-
-module_init(init_rc_map_pixelview)
-module_exit(exit_rc_map_pixelview)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-powercolor-real-angel.c b/drivers/media/IR/keymaps/rc-powercolor-real-angel.c
deleted file mode 100644
index 7cef8190a224..000000000000
--- a/drivers/media/IR/keymaps/rc-powercolor-real-angel.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Remote control for Powercolor Real Angel 330
- * Daniel Fraga <fragabr@gmail.com>
- */
-
-static struct ir_scancode powercolor_real_angel[] = {
-	{ 0x38, KEY_SWITCHVIDEOMODE },	/* switch inputs */
-	{ 0x0c, KEY_MEDIA },		/* Turn ON/OFF App */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-	{ 0x0a, KEY_DIGITS },		/* single, double, tripple digit */
-	{ 0x29, KEY_PREVIOUS },		/* previous channel */
-	{ 0x12, KEY_BRIGHTNESSUP },
-	{ 0x13, KEY_BRIGHTNESSDOWN },
-	{ 0x2b, KEY_MODE },		/* stereo/mono */
-	{ 0x2c, KEY_TEXT },		/* teletext */
-	{ 0x20, KEY_CHANNELUP },	/* channel up */
-	{ 0x21, KEY_CHANNELDOWN },	/* channel down */
-	{ 0x10, KEY_VOLUMEUP },		/* volume up */
-	{ 0x11, KEY_VOLUMEDOWN },	/* volume down */
-	{ 0x0d, KEY_MUTE },
-	{ 0x1f, KEY_RECORD },
-	{ 0x17, KEY_PLAY },
-	{ 0x16, KEY_PAUSE },
-	{ 0x0b, KEY_STOP },
-	{ 0x27, KEY_FASTFORWARD },
-	{ 0x26, KEY_REWIND },
-	{ 0x1e, KEY_SEARCH },		/* autoscan */
-	{ 0x0e, KEY_CAMERA },		/* snapshot */
-	{ 0x2d, KEY_SETUP },
-	{ 0x0f, KEY_SCREEN },		/* full screen */
-	{ 0x14, KEY_RADIO },		/* FM radio */
-	{ 0x25, KEY_POWER },		/* power */
-};
-
-static struct rc_keymap powercolor_real_angel_map = {
-	.map = {
-		.scan    = powercolor_real_angel,
-		.size    = ARRAY_SIZE(powercolor_real_angel),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_POWERCOLOR_REAL_ANGEL,
-	}
-};
-
-static int __init init_rc_map_powercolor_real_angel(void)
-{
-	return ir_register_map(&powercolor_real_angel_map);
-}
-
-static void __exit exit_rc_map_powercolor_real_angel(void)
-{
-	ir_unregister_map(&powercolor_real_angel_map);
-}
-
-module_init(init_rc_map_powercolor_real_angel)
-module_exit(exit_rc_map_powercolor_real_angel)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-proteus-2309.c b/drivers/media/IR/keymaps/rc-proteus-2309.c
deleted file mode 100644
index 22e92d39dee5..000000000000
--- a/drivers/media/IR/keymaps/rc-proteus-2309.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* proteus-2309.h - Keytable for proteus_2309 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Michal Majchrowicz <mmajchrowicz@gmail.com> */
-
-static struct ir_scancode proteus_2309[] = {
-	/* numeric */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x5c, KEY_POWER },		/* power       */
-	{ 0x20, KEY_ZOOM },		/* full screen */
-	{ 0x0f, KEY_BACKSPACE },	/* recall      */
-	{ 0x1b, KEY_ENTER },		/* mute        */
-	{ 0x41, KEY_RECORD },		/* record      */
-	{ 0x43, KEY_STOP },		/* stop        */
-	{ 0x16, KEY_S },
-	{ 0x1a, KEY_POWER2 },		/* off         */
-	{ 0x2e, KEY_RED },
-	{ 0x1f, KEY_CHANNELDOWN },	/* channel -   */
-	{ 0x1c, KEY_CHANNELUP },	/* channel +   */
-	{ 0x10, KEY_VOLUMEDOWN },	/* volume -    */
-	{ 0x1e, KEY_VOLUMEUP },		/* volume +    */
-	{ 0x14, KEY_F1 },
-};
-
-static struct rc_keymap proteus_2309_map = {
-	.map = {
-		.scan    = proteus_2309,
-		.size    = ARRAY_SIZE(proteus_2309),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PROTEUS_2309,
-	}
-};
-
-static int __init init_rc_map_proteus_2309(void)
-{
-	return ir_register_map(&proteus_2309_map);
-}
-
-static void __exit exit_rc_map_proteus_2309(void)
-{
-	ir_unregister_map(&proteus_2309_map);
-}
-
-module_init(init_rc_map_proteus_2309)
-module_exit(exit_rc_map_proteus_2309)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-purpletv.c b/drivers/media/IR/keymaps/rc-purpletv.c
deleted file mode 100644
index 4e20fc2269f7..000000000000
--- a/drivers/media/IR/keymaps/rc-purpletv.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* purpletv.h - Keytable for purpletv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode purpletv[] = {
-	{ 0x03, KEY_POWER },
-	{ 0x6f, KEY_MUTE },
-	{ 0x10, KEY_BACKSPACE },	/* Recall */
-
-	{ 0x11, KEY_0 },
-	{ 0x04, KEY_1 },
-	{ 0x05, KEY_2 },
-	{ 0x06, KEY_3 },
-	{ 0x08, KEY_4 },
-	{ 0x09, KEY_5 },
-	{ 0x0a, KEY_6 },
-	{ 0x0c, KEY_7 },
-	{ 0x0d, KEY_8 },
-	{ 0x0e, KEY_9 },
-	{ 0x12, KEY_DOT },	/* 100+ */
-
-	{ 0x07, KEY_VOLUMEUP },
-	{ 0x0b, KEY_VOLUMEDOWN },
-	{ 0x1a, KEY_KPPLUS },
-	{ 0x18, KEY_KPMINUS },
-	{ 0x15, KEY_UP },
-	{ 0x1d, KEY_DOWN },
-	{ 0x0f, KEY_CHANNELUP },
-	{ 0x13, KEY_CHANNELDOWN },
-	{ 0x48, KEY_ZOOM },
-
-	{ 0x1b, KEY_VIDEO },	/* Video source */
-	{ 0x1f, KEY_CAMERA },	/* Snapshot */
-	{ 0x49, KEY_LANGUAGE },	/* MTS Select */
-	{ 0x19, KEY_SEARCH },	/* Auto Scan */
-
-	{ 0x4b, KEY_RECORD },
-	{ 0x46, KEY_PLAY },
-	{ 0x45, KEY_PAUSE },	/* Pause */
-	{ 0x44, KEY_STOP },
-	{ 0x43, KEY_TIME },	/* Time Shift */
-	{ 0x17, KEY_CHANNEL },	/* SURF CH */
-	{ 0x40, KEY_FORWARD },	/* Forward ? */
-	{ 0x42, KEY_REWIND },	/* Backward ? */
-
-};
-
-static struct rc_keymap purpletv_map = {
-	.map = {
-		.scan    = purpletv,
-		.size    = ARRAY_SIZE(purpletv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PURPLETV,
-	}
-};
-
-static int __init init_rc_map_purpletv(void)
-{
-	return ir_register_map(&purpletv_map);
-}
-
-static void __exit exit_rc_map_purpletv(void)
-{
-	ir_unregister_map(&purpletv_map);
-}
-
-module_init(init_rc_map_purpletv)
-module_exit(exit_rc_map_purpletv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pv951.c b/drivers/media/IR/keymaps/rc-pv951.c
deleted file mode 100644
index 36679e706cf3..000000000000
--- a/drivers/media/IR/keymaps/rc-pv951.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* pv951.h - Keytable for pv951 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mark Phalan <phalanm@o2.ie> */
-
-static struct ir_scancode pv951[] = {
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x12, KEY_POWER },
-	{ 0x10, KEY_MUTE },
-	{ 0x1f, KEY_VOLUMEDOWN },
-	{ 0x1b, KEY_VOLUMEUP },
-	{ 0x1a, KEY_CHANNELUP },
-	{ 0x1e, KEY_CHANNELDOWN },
-	{ 0x0e, KEY_PAGEUP },
-	{ 0x1d, KEY_PAGEDOWN },
-	{ 0x13, KEY_SOUND },
-
-	{ 0x18, KEY_KPPLUSMINUS },	/* CH +/- */
-	{ 0x16, KEY_SUBTITLE },		/* CC */
-	{ 0x0d, KEY_TEXT },		/* TTX */
-	{ 0x0b, KEY_TV },		/* AIR/CBL */
-	{ 0x11, KEY_PC },		/* PC/TV */
-	{ 0x17, KEY_OK },		/* CH RTN */
-	{ 0x19, KEY_MODE },		/* FUNC */
-	{ 0x0c, KEY_SEARCH },		/* AUTOSCAN */
-
-	/* Not sure what to do with these ones! */
-	{ 0x0f, KEY_SELECT },		/* SOURCE */
-	{ 0x0a, KEY_KPPLUS },		/* +100 */
-	{ 0x14, KEY_EQUAL },		/* SYNC */
-	{ 0x1c, KEY_MEDIA },		/* PC/TV */
-};
-
-static struct rc_keymap pv951_map = {
-	.map = {
-		.scan    = pv951,
-		.size    = ARRAY_SIZE(pv951),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_PV951,
-	}
-};
-
-static int __init init_rc_map_pv951(void)
-{
-	return ir_register_map(&pv951_map);
-}
-
-static void __exit exit_rc_map_pv951(void)
-{
-	ir_unregister_map(&pv951_map);
-}
-
-module_init(init_rc_map_pv951)
-module_exit(exit_rc_map_pv951)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c
deleted file mode 100644
index cc6b8f548747..000000000000
--- a/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Hauppauge:the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- *
- * This table contains the complete RC5 code, instead of just the data part
- */
-
-static struct ir_scancode rc5_hauppauge_new[] = {
-	/* Keys 0 to 9 */
-	{ 0x1e00, KEY_0 },
-	{ 0x1e01, KEY_1 },
-	{ 0x1e02, KEY_2 },
-	{ 0x1e03, KEY_3 },
-	{ 0x1e04, KEY_4 },
-	{ 0x1e05, KEY_5 },
-	{ 0x1e06, KEY_6 },
-	{ 0x1e07, KEY_7 },
-	{ 0x1e08, KEY_8 },
-	{ 0x1e09, KEY_9 },
-
-	{ 0x1e0a, KEY_TEXT },		/* keypad asterisk as well */
-	{ 0x1e0b, KEY_RED },		/* red button */
-	{ 0x1e0c, KEY_RADIO },
-	{ 0x1e0d, KEY_MENU },
-	{ 0x1e0e, KEY_SUBTITLE },		/* also the # key */
-	{ 0x1e0f, KEY_MUTE },
-	{ 0x1e10, KEY_VOLUMEUP },
-	{ 0x1e11, KEY_VOLUMEDOWN },
-	{ 0x1e12, KEY_PREVIOUS },		/* previous channel */
-	{ 0x1e14, KEY_UP },
-	{ 0x1e15, KEY_DOWN },
-	{ 0x1e16, KEY_LEFT },
-	{ 0x1e17, KEY_RIGHT },
-	{ 0x1e18, KEY_VIDEO },		/* Videos */
-	{ 0x1e19, KEY_AUDIO },		/* Music */
-	/* 0x1e1a: Pictures - presume this means
-	   "Multimedia Home Platform" -
-	   no "PICTURES" key in input.h
-	 */
-	{ 0x1e1a, KEY_MHP },
-
-	{ 0x1e1b, KEY_EPG },		/* Guide */
-	{ 0x1e1c, KEY_TV },
-	{ 0x1e1e, KEY_NEXTSONG },		/* skip >| */
-	{ 0x1e1f, KEY_EXIT },		/* back/exit */
-	{ 0x1e20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x1e21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x1e22, KEY_CHANNEL },		/* source (old black remote) */
-	{ 0x1e24, KEY_PREVIOUSSONG },	/* replay |< */
-	{ 0x1e25, KEY_ENTER },		/* OK */
-	{ 0x1e26, KEY_SLEEP },		/* minimize (old black remote) */
-	{ 0x1e29, KEY_BLUE },		/* blue key */
-	{ 0x1e2e, KEY_GREEN },		/* green button */
-	{ 0x1e30, KEY_PAUSE },		/* pause */
-	{ 0x1e32, KEY_REWIND },		/* backward << */
-	{ 0x1e34, KEY_FASTFORWARD },	/* forward >> */
-	{ 0x1e35, KEY_PLAY },
-	{ 0x1e36, KEY_STOP },
-	{ 0x1e37, KEY_RECORD },		/* recording */
-	{ 0x1e38, KEY_YELLOW },		/* yellow key */
-	{ 0x1e3b, KEY_SELECT },		/* top right button */
-	{ 0x1e3c, KEY_ZOOM },		/* full */
-	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
-};
-
-static struct rc_keymap rc5_hauppauge_new_map = {
-	.map = {
-		.scan    = rc5_hauppauge_new,
-		.size    = ARRAY_SIZE(rc5_hauppauge_new),
-		.ir_type = IR_TYPE_RC5,
-		.name    = RC_MAP_RC5_HAUPPAUGE_NEW,
-	}
-};
-
-static int __init init_rc_map_rc5_hauppauge_new(void)
-{
-	return ir_register_map(&rc5_hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_rc5_hauppauge_new(void)
-{
-	ir_unregister_map(&rc5_hauppauge_new_map);
-}
-
-module_init(init_rc_map_rc5_hauppauge_new)
-module_exit(exit_rc_map_rc5_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-rc5-tv.c b/drivers/media/IR/keymaps/rc-rc5-tv.c
deleted file mode 100644
index 73cce2f8ddfb..000000000000
--- a/drivers/media/IR/keymaps/rc-rc5-tv.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* rc5-tv.h - Keytable for rc5_tv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* generic RC5 keytable                                          */
-/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
-/* used by old (black) Hauppauge remotes                         */
-
-static struct ir_scancode rc5_tv[] = {
-	/* Keys 0 to 9 */
-	{ 0x00, KEY_0 },
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
-
-	{ 0x0b, KEY_CHANNEL },		/* channel / program (japan: 11) */
-	{ 0x0c, KEY_POWER },		/* standby */
-	{ 0x0d, KEY_MUTE },		/* mute / demute */
-	{ 0x0f, KEY_TV },		/* display */
-	{ 0x10, KEY_VOLUMEUP },
-	{ 0x11, KEY_VOLUMEDOWN },
-	{ 0x12, KEY_BRIGHTNESSUP },
-	{ 0x13, KEY_BRIGHTNESSDOWN },
-	{ 0x1e, KEY_SEARCH },		/* search + */
-	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
-	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
-	{ 0x22, KEY_CHANNEL },		/* alt / channel */
-	{ 0x23, KEY_LANGUAGE },		/* 1st / 2nd language */
-	{ 0x26, KEY_SLEEP },		/* sleeptimer */
-	{ 0x2e, KEY_MENU },		/* 2nd controls (USA: menu) */
-	{ 0x30, KEY_PAUSE },
-	{ 0x32, KEY_REWIND },
-	{ 0x33, KEY_GOTO },
-	{ 0x35, KEY_PLAY },
-	{ 0x36, KEY_STOP },
-	{ 0x37, KEY_RECORD },		/* recording */
-	{ 0x3c, KEY_TEXT },		/* teletext submode (Japan: 12) */
-	{ 0x3d, KEY_SUSPEND },		/* system standby */
-
-};
-
-static struct rc_keymap rc5_tv_map = {
-	.map = {
-		.scan    = rc5_tv,
-		.size    = ARRAY_SIZE(rc5_tv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_RC5_TV,
-	}
-};
-
-static int __init init_rc_map_rc5_tv(void)
-{
-	return ir_register_map(&rc5_tv_map);
-}
-
-static void __exit exit_rc_map_rc5_tv(void)
-{
-	ir_unregister_map(&rc5_tv_map);
-}
-
-module_init(init_rc_map_rc5_tv)
-module_exit(exit_rc_map_rc5_tv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c
deleted file mode 100644
index 6da955dfef48..000000000000
--- a/drivers/media/IR/keymaps/rc-rc6-mce.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use
- * with the Media Center Edition eHome Infrared Transceiver.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode rc6_mce[] = {
-
-	{ 0x800f0400, KEY_NUMERIC_0 },
-	{ 0x800f0401, KEY_NUMERIC_1 },
-	{ 0x800f0402, KEY_NUMERIC_2 },
-	{ 0x800f0403, KEY_NUMERIC_3 },
-	{ 0x800f0404, KEY_NUMERIC_4 },
-	{ 0x800f0405, KEY_NUMERIC_5 },
-	{ 0x800f0406, KEY_NUMERIC_6 },
-	{ 0x800f0407, KEY_NUMERIC_7 },
-	{ 0x800f0408, KEY_NUMERIC_8 },
-	{ 0x800f0409, KEY_NUMERIC_9 },
-
-	{ 0x800f040a, KEY_DELETE },
-	{ 0x800f040b, KEY_ENTER },
-	{ 0x800f040c, KEY_POWER },		/* PC Power */
-	{ 0x800f040d, KEY_PROG1 },		/* Windows MCE button */
-	{ 0x800f040e, KEY_MUTE },
-	{ 0x800f040f, KEY_INFO },
-
-	{ 0x800f0410, KEY_VOLUMEUP },
-	{ 0x800f0411, KEY_VOLUMEDOWN },
-	{ 0x800f0412, KEY_CHANNELUP },
-	{ 0x800f0413, KEY_CHANNELDOWN },
-
-	{ 0x800f0414, KEY_FASTFORWARD },
-	{ 0x800f0415, KEY_REWIND },
-	{ 0x800f0416, KEY_PLAY },
-	{ 0x800f0417, KEY_RECORD },
-	{ 0x800f0418, KEY_PAUSE },
-	{ 0x800f046e, KEY_PLAYPAUSE },
-	{ 0x800f0419, KEY_STOP },
-	{ 0x800f041a, KEY_NEXT },
-	{ 0x800f041b, KEY_PREVIOUS },
-	{ 0x800f041c, KEY_NUMERIC_POUND },
-	{ 0x800f041d, KEY_NUMERIC_STAR },
-
-	{ 0x800f041e, KEY_UP },
-	{ 0x800f041f, KEY_DOWN },
-	{ 0x800f0420, KEY_LEFT },
-	{ 0x800f0421, KEY_RIGHT },
-
-	{ 0x800f0422, KEY_OK },
-	{ 0x800f0423, KEY_EXIT },
-	{ 0x800f0424, KEY_DVD },
-	{ 0x800f0425, KEY_TUNER },		/* LiveTV */
-	{ 0x800f0426, KEY_EPG },		/* Guide */
-	{ 0x800f0427, KEY_ZOOM },		/* Aspect */
-
-	{ 0x800f043a, KEY_BRIGHTNESSUP },
-
-	{ 0x800f0446, KEY_TV },
-	{ 0x800f0447, KEY_AUDIO },		/* My Music */
-	{ 0x800f0448, KEY_PVR },		/* RecordedTV */
-	{ 0x800f0449, KEY_CAMERA },
-	{ 0x800f044a, KEY_VIDEO },
-	{ 0x800f044c, KEY_LANGUAGE },
-	{ 0x800f044d, KEY_TITLE },
-	{ 0x800f044e, KEY_PRINT },	/* Print - HP OEM version of remote */
-
-	{ 0x800f0450, KEY_RADIO },
-
-	{ 0x800f045a, KEY_SUBTITLE },		/* Caption/Teletext */
-	{ 0x800f045b, KEY_RED },
-	{ 0x800f045c, KEY_GREEN },
-	{ 0x800f045d, KEY_YELLOW },
-	{ 0x800f045e, KEY_BLUE },
-
-	{ 0x800f0465, KEY_POWER2 },	/* TV Power */
-	{ 0x800f046e, KEY_PLAYPAUSE },
-	{ 0x800f046f, KEY_MEDIA },	/* Start media application (NEW) */
-
-	{ 0x800f0480, KEY_BRIGHTNESSDOWN },
-	{ 0x800f0481, KEY_PLAYPAUSE },
-};
-
-static struct rc_keymap rc6_mce_map = {
-	.map = {
-		.scan    = rc6_mce,
-		.size    = ARRAY_SIZE(rc6_mce),
-		.ir_type = IR_TYPE_RC6,
-		.name    = RC_MAP_RC6_MCE,
-	}
-};
-
-static int __init init_rc_map_rc6_mce(void)
-{
-	return ir_register_map(&rc6_mce_map);
-}
-
-static void __exit exit_rc_map_rc6_mce(void)
-{
-	ir_unregister_map(&rc6_mce_map);
-}
-
-module_init(init_rc_map_rc6_mce)
-module_exit(exit_rc_map_rc6_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c
deleted file mode 100644
index ab1a6d2baf72..000000000000
--- a/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Zogis Real Audio 220 - 32 keys IR */
-
-static struct ir_scancode real_audio_220_32_keys[] = {
-	{ 0x1c, KEY_RADIO},
-	{ 0x12, KEY_POWER2},
-
-	{ 0x01, KEY_1},
-	{ 0x02, KEY_2},
-	{ 0x03, KEY_3},
-	{ 0x04, KEY_4},
-	{ 0x05, KEY_5},
-	{ 0x06, KEY_6},
-	{ 0x07, KEY_7},
-	{ 0x08, KEY_8},
-	{ 0x09, KEY_9},
-	{ 0x00, KEY_0},
-
-	{ 0x0c, KEY_VOLUMEUP},
-	{ 0x18, KEY_VOLUMEDOWN},
-	{ 0x0b, KEY_CHANNELUP},
-	{ 0x15, KEY_CHANNELDOWN},
-	{ 0x16, KEY_ENTER},
-
-	{ 0x11, KEY_LIST},		/* Source */
-	{ 0x0d, KEY_AUDIO},		/* stereo */
-
-	{ 0x0f, KEY_PREVIOUS},		/* Prev */
-	{ 0x1b, KEY_TIME},		/* Timeshift */
-	{ 0x1a, KEY_NEXT},		/* Next */
-
-	{ 0x0e, KEY_STOP},
-	{ 0x1f, KEY_PLAY},
-	{ 0x1e, KEY_PLAYPAUSE},		/* Pause */
-
-	{ 0x1d, KEY_RECORD},
-	{ 0x13, KEY_MUTE},
-	{ 0x19, KEY_CAMERA},		/* Snapshot */
-
-};
-
-static struct rc_keymap real_audio_220_32_keys_map = {
-	.map = {
-		.scan    = real_audio_220_32_keys,
-		.size    = ARRAY_SIZE(real_audio_220_32_keys),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_REAL_AUDIO_220_32_KEYS,
-	}
-};
-
-static int __init init_rc_map_real_audio_220_32_keys(void)
-{
-	return ir_register_map(&real_audio_220_32_keys_map);
-}
-
-static void __exit exit_rc_map_real_audio_220_32_keys(void)
-{
-	ir_unregister_map(&real_audio_220_32_keys_map);
-}
-
-module_init(init_rc_map_real_audio_220_32_keys)
-module_exit(exit_rc_map_real_audio_220_32_keys)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-streamzap.c b/drivers/media/IR/keymaps/rc-streamzap.c
deleted file mode 100644
index df32013a321c..000000000000
--- a/drivers/media/IR/keymaps/rc-streamzap.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* rc-streamzap.c - Keytable for Streamzap PC Remote, for use
- * with the Streamzap PC Remote IR Receiver.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode streamzap[] = {
-/*
- * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
- * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
- * an additional RC-5-sz decoder is being deployed to support it, but it
- * may be possible to merge it back with the standard RC-5 decoder.
- */
-	{ 0x28c0, KEY_NUMERIC_0 },
-	{ 0x28c1, KEY_NUMERIC_1 },
-	{ 0x28c2, KEY_NUMERIC_2 },
-	{ 0x28c3, KEY_NUMERIC_3 },
-	{ 0x28c4, KEY_NUMERIC_4 },
-	{ 0x28c5, KEY_NUMERIC_5 },
-	{ 0x28c6, KEY_NUMERIC_6 },
-	{ 0x28c7, KEY_NUMERIC_7 },
-	{ 0x28c8, KEY_NUMERIC_8 },
-	{ 0x28c9, KEY_NUMERIC_9 },
-	{ 0x28ca, KEY_POWER },
-	{ 0x28cb, KEY_MUTE },
-	{ 0x28cc, KEY_CHANNELUP },
-	{ 0x28cd, KEY_VOLUMEUP },
-	{ 0x28ce, KEY_CHANNELDOWN },
-	{ 0x28cf, KEY_VOLUMEDOWN },
-	{ 0x28d0, KEY_UP },
-	{ 0x28d1, KEY_LEFT },
-	{ 0x28d2, KEY_OK },
-	{ 0x28d3, KEY_RIGHT },
-	{ 0x28d4, KEY_DOWN },
-	{ 0x28d5, KEY_MENU },
-	{ 0x28d6, KEY_EXIT },
-	{ 0x28d7, KEY_PLAY },
-	{ 0x28d8, KEY_PAUSE },
-	{ 0x28d9, KEY_STOP },
-	{ 0x28da, KEY_BACK },
-	{ 0x28db, KEY_FORWARD },
-	{ 0x28dc, KEY_RECORD },
-	{ 0x28dd, KEY_REWIND },
-	{ 0x28de, KEY_FASTFORWARD },
-	{ 0x28e0, KEY_RED },
-	{ 0x28e1, KEY_GREEN },
-	{ 0x28e2, KEY_YELLOW },
-	{ 0x28e3, KEY_BLUE },
-
-};
-
-static struct rc_keymap streamzap_map = {
-	.map = {
-		.scan    = streamzap,
-		.size    = ARRAY_SIZE(streamzap),
-		.ir_type = IR_TYPE_RC5_SZ,
-		.name    = RC_MAP_STREAMZAP,
-	}
-};
-
-static int __init init_rc_map_streamzap(void)
-{
-	return ir_register_map(&streamzap_map);
-}
-
-static void __exit exit_rc_map_streamzap(void)
-{
-	ir_unregister_map(&streamzap_map);
-}
-
-module_init(init_rc_map_streamzap)
-module_exit(exit_rc_map_streamzap)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-tbs-nec.c b/drivers/media/IR/keymaps/rc-tbs-nec.c
deleted file mode 100644
index 3309631e6f80..000000000000
--- a/drivers/media/IR/keymaps/rc-tbs-nec.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* tbs-nec.h - Keytable for tbs_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode tbs_nec[] = {
-	{ 0x04, KEY_POWER2},	/*power*/
-	{ 0x14, KEY_MUTE},	/*mute*/
-	{ 0x07, KEY_1},
-	{ 0x06, KEY_2},
-	{ 0x05, KEY_3},
-	{ 0x0b, KEY_4},
-	{ 0x0a, KEY_5},
-	{ 0x09, KEY_6},
-	{ 0x0f, KEY_7},
-	{ 0x0e, KEY_8},
-	{ 0x0d, KEY_9},
-	{ 0x12, KEY_0},
-	{ 0x16, KEY_CHANNELUP},	/*ch+*/
-	{ 0x11, KEY_CHANNELDOWN},/*ch-*/
-	{ 0x13, KEY_VOLUMEUP},	/*vol+*/
-	{ 0x0c, KEY_VOLUMEDOWN},/*vol-*/
-	{ 0x03, KEY_RECORD},	/*rec*/
-	{ 0x18, KEY_PAUSE},	/*pause*/
-	{ 0x19, KEY_OK},	/*ok*/
-	{ 0x1a, KEY_CAMERA},	/* snapshot */
-	{ 0x01, KEY_UP},
-	{ 0x10, KEY_LEFT},
-	{ 0x02, KEY_RIGHT},
-	{ 0x08, KEY_DOWN},
-	{ 0x15, KEY_FAVORITES},
-	{ 0x17, KEY_SUBTITLE},
-	{ 0x1d, KEY_ZOOM},
-	{ 0x1f, KEY_EXIT},
-	{ 0x1e, KEY_MENU},
-	{ 0x1c, KEY_EPG},
-	{ 0x00, KEY_PREVIOUS},
-	{ 0x1b, KEY_MODE},
-};
-
-static struct rc_keymap tbs_nec_map = {
-	.map = {
-		.scan    = tbs_nec,
-		.size    = ARRAY_SIZE(tbs_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TBS_NEC,
-	}
-};
-
-static int __init init_rc_map_tbs_nec(void)
-{
-	return ir_register_map(&tbs_nec_map);
-}
-
-static void __exit exit_rc_map_tbs_nec(void)
-{
-	ir_unregister_map(&tbs_nec_map);
-}
-
-module_init(init_rc_map_tbs_nec)
-module_exit(exit_rc_map_tbs_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c
deleted file mode 100644
index 5326a0b444c1..000000000000
--- a/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Terratec Cinergy Hybrid T USB XS
-   Devin Heitmueller <dheitmueller@linuxtv.org>
- */
-
-static struct ir_scancode terratec_cinergy_xs[] = {
-	{ 0x41, KEY_HOME},
-	{ 0x01, KEY_POWER},
-	{ 0x42, KEY_MENU},
-	{ 0x02, KEY_1},
-	{ 0x03, KEY_2},
-	{ 0x04, KEY_3},
-	{ 0x43, KEY_SUBTITLE},
-	{ 0x05, KEY_4},
-	{ 0x06, KEY_5},
-	{ 0x07, KEY_6},
-	{ 0x44, KEY_TEXT},
-	{ 0x08, KEY_7},
-	{ 0x09, KEY_8},
-	{ 0x0a, KEY_9},
-	{ 0x45, KEY_DELETE},
-	{ 0x0b, KEY_TUNER},
-	{ 0x0c, KEY_0},
-	{ 0x0d, KEY_MODE},
-	{ 0x46, KEY_TV},
-	{ 0x47, KEY_DVD},
-	{ 0x49, KEY_VIDEO},
-	{ 0x4b, KEY_AUX},
-	{ 0x10, KEY_UP},
-	{ 0x11, KEY_LEFT},
-	{ 0x12, KEY_OK},
-	{ 0x13, KEY_RIGHT},
-	{ 0x14, KEY_DOWN},
-	{ 0x0f, KEY_EPG},
-	{ 0x16, KEY_INFO},
-	{ 0x4d, KEY_BACKSPACE},
-	{ 0x1c, KEY_VOLUMEUP},
-	{ 0x4c, KEY_PLAY},
-	{ 0x1b, KEY_CHANNELUP},
-	{ 0x1e, KEY_VOLUMEDOWN},
-	{ 0x1d, KEY_MUTE},
-	{ 0x1f, KEY_CHANNELDOWN},
-	{ 0x17, KEY_RED},
-	{ 0x18, KEY_GREEN},
-	{ 0x19, KEY_YELLOW},
-	{ 0x1a, KEY_BLUE},
-	{ 0x58, KEY_RECORD},
-	{ 0x48, KEY_STOP},
-	{ 0x40, KEY_PAUSE},
-	{ 0x54, KEY_LAST},
-	{ 0x4e, KEY_REWIND},
-	{ 0x4f, KEY_FASTFORWARD},
-	{ 0x5c, KEY_NEXT},
-};
-
-static struct rc_keymap terratec_cinergy_xs_map = {
-	.map = {
-		.scan    = terratec_cinergy_xs,
-		.size    = ARRAY_SIZE(terratec_cinergy_xs),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TERRATEC_CINERGY_XS,
-	}
-};
-
-static int __init init_rc_map_terratec_cinergy_xs(void)
-{
-	return ir_register_map(&terratec_cinergy_xs_map);
-}
-
-static void __exit exit_rc_map_terratec_cinergy_xs(void)
-{
-	ir_unregister_map(&terratec_cinergy_xs_map);
-}
-
-module_init(init_rc_map_terratec_cinergy_xs)
-module_exit(exit_rc_map_terratec_cinergy_xs)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-terratec-slim.c b/drivers/media/IR/keymaps/rc-terratec-slim.c
deleted file mode 100644
index 10dee4c1deff..000000000000
--- a/drivers/media/IR/keymaps/rc-terratec-slim.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * TerraTec remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* TerraTec slim remote, 7 rows, 4 columns. */
-/* Uses NEC extended 0x02bd. */
-static struct ir_scancode terratec_slim[] = {
-	{ 0x02bd00, KEY_1 },
-	{ 0x02bd01, KEY_2 },
-	{ 0x02bd02, KEY_3 },
-	{ 0x02bd03, KEY_4 },
-	{ 0x02bd04, KEY_5 },
-	{ 0x02bd05, KEY_6 },
-	{ 0x02bd06, KEY_7 },
-	{ 0x02bd07, KEY_8 },
-	{ 0x02bd08, KEY_9 },
-	{ 0x02bd09, KEY_0 },
-	{ 0x02bd0a, KEY_MUTE },
-	{ 0x02bd0b, KEY_NEW },             /* symbol: PIP */
-	{ 0x02bd0e, KEY_VOLUMEDOWN },
-	{ 0x02bd0f, KEY_PLAYPAUSE },
-	{ 0x02bd10, KEY_RIGHT },
-	{ 0x02bd11, KEY_LEFT },
-	{ 0x02bd12, KEY_UP },
-	{ 0x02bd13, KEY_DOWN },
-	{ 0x02bd15, KEY_OK },
-	{ 0x02bd16, KEY_STOP },
-	{ 0x02bd17, KEY_CAMERA },          /* snapshot */
-	{ 0x02bd18, KEY_CHANNELUP },
-	{ 0x02bd19, KEY_RECORD },
-	{ 0x02bd1a, KEY_CHANNELDOWN },
-	{ 0x02bd1c, KEY_ESC },
-	{ 0x02bd1f, KEY_VOLUMEUP },
-	{ 0x02bd44, KEY_EPG },
-	{ 0x02bd45, KEY_POWER2 },          /* [red power button] */
-};
-
-static struct rc_keymap terratec_slim_map = {
-	.map = {
-		.scan    = terratec_slim,
-		.size    = ARRAY_SIZE(terratec_slim),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_TERRATEC_SLIM,
-	}
-};
-
-static int __init init_rc_map_terratec_slim(void)
-{
-	return ir_register_map(&terratec_slim_map);
-}
-
-static void __exit exit_rc_map_terratec_slim(void)
-{
-	ir_unregister_map(&terratec_slim_map);
-}
-
-module_init(init_rc_map_terratec_slim)
-module_exit(exit_rc_map_terratec_slim)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-tevii-nec.c b/drivers/media/IR/keymaps/rc-tevii-nec.c
deleted file mode 100644
index e30d411c07bb..000000000000
--- a/drivers/media/IR/keymaps/rc-tevii-nec.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* tevii-nec.h - Keytable for tevii_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode tevii_nec[] = {
-	{ 0x0a, KEY_POWER2},
-	{ 0x0c, KEY_MUTE},
-	{ 0x11, KEY_1},
-	{ 0x12, KEY_2},
-	{ 0x13, KEY_3},
-	{ 0x14, KEY_4},
-	{ 0x15, KEY_5},
-	{ 0x16, KEY_6},
-	{ 0x17, KEY_7},
-	{ 0x18, KEY_8},
-	{ 0x19, KEY_9},
-	{ 0x10, KEY_0},
-	{ 0x1c, KEY_MENU},
-	{ 0x0f, KEY_VOLUMEDOWN},
-	{ 0x1a, KEY_LAST},
-	{ 0x0e, KEY_OPEN},
-	{ 0x04, KEY_RECORD},
-	{ 0x09, KEY_VOLUMEUP},
-	{ 0x08, KEY_CHANNELUP},
-	{ 0x07, KEY_PVR},
-	{ 0x0b, KEY_TIME},
-	{ 0x02, KEY_RIGHT},
-	{ 0x03, KEY_LEFT},
-	{ 0x00, KEY_UP},
-	{ 0x1f, KEY_OK},
-	{ 0x01, KEY_DOWN},
-	{ 0x05, KEY_TUNER},
-	{ 0x06, KEY_CHANNELDOWN},
-	{ 0x40, KEY_PLAYPAUSE},
-	{ 0x1e, KEY_REWIND},
-	{ 0x1b, KEY_FAVORITES},
-	{ 0x1d, KEY_BACK},
-	{ 0x4d, KEY_FASTFORWARD},
-	{ 0x44, KEY_EPG},
-	{ 0x4c, KEY_INFO},
-	{ 0x41, KEY_AB},
-	{ 0x43, KEY_AUDIO},
-	{ 0x45, KEY_SUBTITLE},
-	{ 0x4a, KEY_LIST},
-	{ 0x46, KEY_F1},
-	{ 0x47, KEY_F2},
-	{ 0x5e, KEY_F3},
-	{ 0x5c, KEY_F4},
-	{ 0x52, KEY_F5},
-	{ 0x5a, KEY_F6},
-	{ 0x56, KEY_MODE},
-	{ 0x58, KEY_SWITCHVIDEOMODE},
-};
-
-static struct rc_keymap tevii_nec_map = {
-	.map = {
-		.scan    = tevii_nec,
-		.size    = ARRAY_SIZE(tevii_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TEVII_NEC,
-	}
-};
-
-static int __init init_rc_map_tevii_nec(void)
-{
-	return ir_register_map(&tevii_nec_map);
-}
-
-static void __exit exit_rc_map_tevii_nec(void)
-{
-	ir_unregister_map(&tevii_nec_map);
-}
-
-module_init(init_rc_map_tevii_nec)
-module_exit(exit_rc_map_tevii_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-total-media-in-hand.c b/drivers/media/IR/keymaps/rc-total-media-in-hand.c
deleted file mode 100644
index fd1985763781..000000000000
--- a/drivers/media/IR/keymaps/rc-total-media-in-hand.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Total Media In Hand remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Uses NEC extended 0x02bd */
-static struct ir_scancode total_media_in_hand[] = {
-	{ 0x02bd00, KEY_1 },
-	{ 0x02bd01, KEY_2 },
-	{ 0x02bd02, KEY_3 },
-	{ 0x02bd03, KEY_4 },
-	{ 0x02bd04, KEY_5 },
-	{ 0x02bd05, KEY_6 },
-	{ 0x02bd06, KEY_7 },
-	{ 0x02bd07, KEY_8 },
-	{ 0x02bd08, KEY_9 },
-	{ 0x02bd09, KEY_0 },
-	{ 0x02bd0a, KEY_MUTE },
-	{ 0x02bd0b, KEY_CYCLEWINDOWS },    /* yellow, [min / max] */
-	{ 0x02bd0c, KEY_VIDEO },           /* TV / AV */
-	{ 0x02bd0e, KEY_VOLUMEDOWN },
-	{ 0x02bd0f, KEY_TIME },            /* TimeShift */
-	{ 0x02bd10, KEY_RIGHT },           /* right arrow */
-	{ 0x02bd11, KEY_LEFT },            /* left arrow */
-	{ 0x02bd12, KEY_UP },              /* up arrow */
-	{ 0x02bd13, KEY_DOWN },            /* down arrow */
-	{ 0x02bd14, KEY_POWER2 },          /* [red] */
-	{ 0x02bd15, KEY_OK },              /* OK */
-	{ 0x02bd16, KEY_STOP },
-	{ 0x02bd17, KEY_CAMERA },          /* Snapshot */
-	{ 0x02bd18, KEY_CHANNELUP },
-	{ 0x02bd19, KEY_RECORD },
-	{ 0x02bd1a, KEY_CHANNELDOWN },
-	{ 0x02bd1c, KEY_ESC },             /* Esc */
-	{ 0x02bd1e, KEY_PLAY },
-	{ 0x02bd1f, KEY_VOLUMEUP },
-	{ 0x02bd40, KEY_PAUSE },
-	{ 0x02bd41, KEY_FASTFORWARD },     /* FF >> */
-	{ 0x02bd42, KEY_REWIND },          /* FR << */
-	{ 0x02bd43, KEY_ZOOM },            /* [window + mouse pointer] */
-	{ 0x02bd44, KEY_SHUFFLE },         /* Shuffle */
-	{ 0x02bd45, KEY_INFO },            /* [red (I)] */
-};
-
-static struct rc_keymap total_media_in_hand_map = {
-	.map = {
-		.scan    = total_media_in_hand,
-		.size    = ARRAY_SIZE(total_media_in_hand),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_TOTAL_MEDIA_IN_HAND,
-	}
-};
-
-static int __init init_rc_map_total_media_in_hand(void)
-{
-	return ir_register_map(&total_media_in_hand_map);
-}
-
-static void __exit exit_rc_map_total_media_in_hand(void)
-{
-	ir_unregister_map(&total_media_in_hand_map);
-}
-
-module_init(init_rc_map_total_media_in_hand)
-module_exit(exit_rc_map_total_media_in_hand)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-trekstor.c b/drivers/media/IR/keymaps/rc-trekstor.c
deleted file mode 100644
index 91092caca452..000000000000
--- a/drivers/media/IR/keymaps/rc-trekstor.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * TrekStor remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License along
- *    with this program; if not, write to the Free Software Foundation, Inc.,
- *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* TrekStor DVB-T USB Stick remote controller. */
-/* Imported from af9015.h.
-   Initial keytable was from Marc Schneider <macke@macke.org> */
-static struct ir_scancode trekstor[] = {
-	{ 0x0084, KEY_0 },
-	{ 0x0085, KEY_MUTE },            /* Mute */
-	{ 0x0086, KEY_HOMEPAGE },        /* Home */
-	{ 0x0087, KEY_UP },              /* Up */
-	{ 0x0088, KEY_OK },              /* OK */
-	{ 0x0089, KEY_RIGHT },           /* Right */
-	{ 0x008a, KEY_FASTFORWARD },     /* Fast forward */
-	{ 0x008b, KEY_VOLUMEUP },        /* Volume + */
-	{ 0x008c, KEY_DOWN },            /* Down */
-	{ 0x008d, KEY_PLAY },            /* Play/Pause */
-	{ 0x008e, KEY_STOP },            /* Stop */
-	{ 0x008f, KEY_EPG },             /* Info/EPG */
-	{ 0x0090, KEY_7 },
-	{ 0x0091, KEY_4 },
-	{ 0x0092, KEY_1 },
-	{ 0x0093, KEY_CHANNELDOWN },     /* Channel - */
-	{ 0x0094, KEY_8 },
-	{ 0x0095, KEY_5 },
-	{ 0x0096, KEY_2 },
-	{ 0x0097, KEY_CHANNELUP },       /* Channel + */
-	{ 0x0098, KEY_9 },
-	{ 0x0099, KEY_6 },
-	{ 0x009a, KEY_3 },
-	{ 0x009b, KEY_VOLUMEDOWN },      /* Volume - */
-	{ 0x009c, KEY_TV },              /* TV */
-	{ 0x009d, KEY_RECORD },          /* Record */
-	{ 0x009e, KEY_REWIND },          /* Rewind */
-	{ 0x009f, KEY_LEFT },            /* Left */
-};
-
-static struct rc_keymap trekstor_map = {
-	.map = {
-		.scan    = trekstor,
-		.size    = ARRAY_SIZE(trekstor),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_TREKSTOR,
-	}
-};
-
-static int __init init_rc_map_trekstor(void)
-{
-	return ir_register_map(&trekstor_map);
-}
-
-static void __exit exit_rc_map_trekstor(void)
-{
-	ir_unregister_map(&trekstor_map);
-}
-
-module_init(init_rc_map_trekstor)
-module_exit(exit_rc_map_trekstor)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/IR/keymaps/rc-tt-1500.c b/drivers/media/IR/keymaps/rc-tt-1500.c
deleted file mode 100644
index bc88de011d5d..000000000000
--- a/drivers/media/IR/keymaps/rc-tt-1500.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* tt-1500.h - Keytable for tt_1500 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* for the Technotrend 1500 bundled remotes (grey and black): */
-
-static struct ir_scancode tt_1500[] = {
-	{ 0x01, KEY_POWER },
-	{ 0x02, KEY_SHUFFLE },		/* ? double-arrow key */
-	{ 0x03, KEY_1 },
-	{ 0x04, KEY_2 },
-	{ 0x05, KEY_3 },
-	{ 0x06, KEY_4 },
-	{ 0x07, KEY_5 },
-	{ 0x08, KEY_6 },
-	{ 0x09, KEY_7 },
-	{ 0x0a, KEY_8 },
-	{ 0x0b, KEY_9 },
-	{ 0x0c, KEY_0 },
-	{ 0x0d, KEY_UP },
-	{ 0x0e, KEY_LEFT },
-	{ 0x0f, KEY_OK },
-	{ 0x10, KEY_RIGHT },
-	{ 0x11, KEY_DOWN },
-	{ 0x12, KEY_INFO },
-	{ 0x13, KEY_EXIT },
-	{ 0x14, KEY_RED },
-	{ 0x15, KEY_GREEN },
-	{ 0x16, KEY_YELLOW },
-	{ 0x17, KEY_BLUE },
-	{ 0x18, KEY_MUTE },
-	{ 0x19, KEY_TEXT },
-	{ 0x1a, KEY_MODE },		/* ? TV/Radio */
-	{ 0x21, KEY_OPTION },
-	{ 0x22, KEY_EPG },
-	{ 0x23, KEY_CHANNELUP },
-	{ 0x24, KEY_CHANNELDOWN },
-	{ 0x25, KEY_VOLUMEUP },
-	{ 0x26, KEY_VOLUMEDOWN },
-	{ 0x27, KEY_SETUP },
-	{ 0x3a, KEY_RECORD },		/* these keys are only in the black remote */
-	{ 0x3b, KEY_PLAY },
-	{ 0x3c, KEY_STOP },
-	{ 0x3d, KEY_REWIND },
-	{ 0x3e, KEY_PAUSE },
-	{ 0x3f, KEY_FORWARD },
-};
-
-static struct rc_keymap tt_1500_map = {
-	.map = {
-		.scan    = tt_1500,
-		.size    = ARRAY_SIZE(tt_1500),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TT_1500,
-	}
-};
-
-static int __init init_rc_map_tt_1500(void)
-{
-	return ir_register_map(&tt_1500_map);
-}
-
-static void __exit exit_rc_map_tt_1500(void)
-{
-	ir_unregister_map(&tt_1500_map);
-}
-
-module_init(init_rc_map_tt_1500)
-module_exit(exit_rc_map_tt_1500)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-twinhan1027.c b/drivers/media/IR/keymaps/rc-twinhan1027.c
deleted file mode 100644
index 0b5d356c2d84..000000000000
--- a/drivers/media/IR/keymaps/rc-twinhan1027.c
+++ /dev/null
@@ -1,87 +0,0 @@
-#include <media/rc-map.h>
-
-static struct ir_scancode twinhan_vp1027[] = {
-	{ 0x16, KEY_POWER2 },
-	{ 0x17, KEY_FAVORITES },
-	{ 0x0f, KEY_TEXT },
-	{ 0x48, KEY_INFO},
-	{ 0x1c, KEY_EPG },
-	{ 0x04, KEY_LIST },
-
-	{ 0x03, KEY_1 },
-	{ 0x01, KEY_2 },
-	{ 0x06, KEY_3 },
-	{ 0x09, KEY_4 },
-	{ 0x1d, KEY_5 },
-	{ 0x1f, KEY_6 },
-	{ 0x0d, KEY_7 },
-	{ 0x19, KEY_8 },
-	{ 0x1b, KEY_9 },
-	{ 0x15, KEY_0 },
-
-	{ 0x0c, KEY_CANCEL },
-	{ 0x4a, KEY_CLEAR },
-	{ 0x13, KEY_BACKSPACE },
-	{ 0x00, KEY_TAB },
-
-	{ 0x4b, KEY_UP },
-	{ 0x51, KEY_DOWN },
-	{ 0x4e, KEY_LEFT },
-	{ 0x52, KEY_RIGHT },
-	{ 0x4f, KEY_ENTER },
-
-	{ 0x1e, KEY_VOLUMEUP },
-	{ 0x0a, KEY_VOLUMEDOWN },
-	{ 0x02, KEY_CHANNELDOWN },
-	{ 0x05, KEY_CHANNELUP },
-	{ 0x11, KEY_RECORD },
-
-	{ 0x14, KEY_PLAY },
-	{ 0x4c, KEY_PAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x40, KEY_REWIND },
-	{ 0x12, KEY_FASTFORWARD },
-	{ 0x41, KEY_PREVIOUSSONG },
-	{ 0x42, KEY_NEXTSONG },
-	{ 0x54, KEY_SAVE },
-	{ 0x50, KEY_LANGUAGE },
-	{ 0x47, KEY_MEDIA },
-	{ 0x4d, KEY_SCREEN },
-	{ 0x43, KEY_SUBTITLE },
-	{ 0x10, KEY_MUTE },
-	{ 0x49, KEY_AUDIO },
-	{ 0x07, KEY_SLEEP },
-	{ 0x08, KEY_VIDEO },
-	{ 0x0e, KEY_AGAIN },
-	{ 0x45, KEY_EQUAL },
-	{ 0x46, KEY_MINUS },
-	{ 0x18, KEY_RED },
-	{ 0x53, KEY_GREEN },
-	{ 0x5e, KEY_YELLOW },
-	{ 0x5f, KEY_BLUE },
-};
-
-static struct rc_keymap twinhan_vp1027_map = {
-	.map = {
-		.scan    = twinhan_vp1027,
-		.size    = ARRAY_SIZE(twinhan_vp1027),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TWINHAN_VP1027_DVBS,
-	}
-};
-
-static int __init init_rc_map_twinhan_vp1027(void)
-{
-	return ir_register_map(&twinhan_vp1027_map);
-}
-
-static void __exit exit_rc_map_twinhan_vp1027(void)
-{
-	ir_unregister_map(&twinhan_vp1027_map);
-}
-
-module_init(init_rc_map_twinhan_vp1027)
-module_exit(exit_rc_map_twinhan_vp1027)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sergey Ivanov <123kash@gmail.com>");
diff --git a/drivers/media/IR/keymaps/rc-videomate-s350.c b/drivers/media/IR/keymaps/rc-videomate-s350.c
deleted file mode 100644
index 4df7fcd1d2fc..000000000000
--- a/drivers/media/IR/keymaps/rc-videomate-s350.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* videomate-s350.h - Keytable for videomate_s350 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode videomate_s350[] = {
-	{ 0x00, KEY_TV},
-	{ 0x01, KEY_DVD},
-	{ 0x04, KEY_RECORD},
-	{ 0x05, KEY_VIDEO},	/* TV/Video */
-	{ 0x07, KEY_STOP},
-	{ 0x08, KEY_PLAYPAUSE},
-	{ 0x0a, KEY_REWIND},
-	{ 0x0f, KEY_FASTFORWARD},
-	{ 0x10, KEY_CHANNELUP},
-	{ 0x12, KEY_VOLUMEUP},
-	{ 0x13, KEY_CHANNELDOWN},
-	{ 0x14, KEY_MUTE},
-	{ 0x15, KEY_VOLUMEDOWN},
-	{ 0x16, KEY_1},
-	{ 0x17, KEY_2},
-	{ 0x18, KEY_3},
-	{ 0x19, KEY_4},
-	{ 0x1a, KEY_5},
-	{ 0x1b, KEY_6},
-	{ 0x1c, KEY_7},
-	{ 0x1d, KEY_8},
-	{ 0x1e, KEY_9},
-	{ 0x1f, KEY_0},
-	{ 0x21, KEY_SLEEP},
-	{ 0x24, KEY_ZOOM},
-	{ 0x25, KEY_LAST},	/* Recall */
-	{ 0x26, KEY_SUBTITLE},	/* CC */
-	{ 0x27, KEY_LANGUAGE},	/* MTS */
-	{ 0x29, KEY_CHANNEL},	/* SURF */
-	{ 0x2b, KEY_A},
-	{ 0x2c, KEY_B},
-	{ 0x2f, KEY_CAMERA},	/* Snapshot */
-	{ 0x23, KEY_RADIO},
-	{ 0x02, KEY_PREVIOUSSONG},
-	{ 0x06, KEY_NEXTSONG},
-	{ 0x03, KEY_EPG},
-	{ 0x09, KEY_SETUP},
-	{ 0x22, KEY_BACKSPACE},
-	{ 0x0c, KEY_UP},
-	{ 0x0e, KEY_DOWN},
-	{ 0x0b, KEY_LEFT},
-	{ 0x0d, KEY_RIGHT},
-	{ 0x11, KEY_ENTER},
-	{ 0x20, KEY_TEXT},
-};
-
-static struct rc_keymap videomate_s350_map = {
-	.map = {
-		.scan    = videomate_s350,
-		.size    = ARRAY_SIZE(videomate_s350),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_VIDEOMATE_S350,
-	}
-};
-
-static int __init init_rc_map_videomate_s350(void)
-{
-	return ir_register_map(&videomate_s350_map);
-}
-
-static void __exit exit_rc_map_videomate_s350(void)
-{
-	ir_unregister_map(&videomate_s350_map);
-}
-
-module_init(init_rc_map_videomate_s350)
-module_exit(exit_rc_map_videomate_s350)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c b/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c
deleted file mode 100644
index 776b0a638d87..000000000000
--- a/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode videomate_tv_pvr[] = {
-	{ 0x14, KEY_MUTE },
-	{ 0x24, KEY_ZOOM },
-
-	{ 0x01, KEY_DVD },
-	{ 0x23, KEY_RADIO },
-	{ 0x00, KEY_TV },
-
-	{ 0x0a, KEY_REWIND },
-	{ 0x08, KEY_PLAYPAUSE },
-	{ 0x0f, KEY_FORWARD },
-
-	{ 0x02, KEY_PREVIOUS },
-	{ 0x07, KEY_STOP },
-	{ 0x06, KEY_NEXT },
-
-	{ 0x0c, KEY_UP },
-	{ 0x0e, KEY_DOWN },
-	{ 0x0b, KEY_LEFT },
-	{ 0x0d, KEY_RIGHT },
-	{ 0x11, KEY_OK },
-
-	{ 0x03, KEY_MENU },
-	{ 0x09, KEY_SETUP },
-	{ 0x05, KEY_VIDEO },
-	{ 0x22, KEY_CHANNEL },
-
-	{ 0x12, KEY_VOLUMEUP },
-	{ 0x15, KEY_VOLUMEDOWN },
-	{ 0x10, KEY_CHANNELUP },
-	{ 0x13, KEY_CHANNELDOWN },
-
-	{ 0x04, KEY_RECORD },
-
-	{ 0x16, KEY_1 },
-	{ 0x17, KEY_2 },
-	{ 0x18, KEY_3 },
-	{ 0x19, KEY_4 },
-	{ 0x1a, KEY_5 },
-	{ 0x1b, KEY_6 },
-	{ 0x1c, KEY_7 },
-	{ 0x1d, KEY_8 },
-	{ 0x1e, KEY_9 },
-	{ 0x1f, KEY_0 },
-
-	{ 0x20, KEY_LANGUAGE },
-	{ 0x21, KEY_SLEEP },
-};
-
-static struct rc_keymap videomate_tv_pvr_map = {
-	.map = {
-		.scan    = videomate_tv_pvr,
-		.size    = ARRAY_SIZE(videomate_tv_pvr),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_VIDEOMATE_TV_PVR,
-	}
-};
-
-static int __init init_rc_map_videomate_tv_pvr(void)
-{
-	return ir_register_map(&videomate_tv_pvr_map);
-}
-
-static void __exit exit_rc_map_videomate_tv_pvr(void)
-{
-	ir_unregister_map(&videomate_tv_pvr_map);
-}
-
-module_init(init_rc_map_videomate_tv_pvr)
-module_exit(exit_rc_map_videomate_tv_pvr)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c
deleted file mode 100644
index 9d2d550aaa90..000000000000
--- a/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Leadtek Winfast TV USB II Deluxe remote
-   Magnus Alm <magnus.alm@gmail.com>
- */
-
-static struct ir_scancode winfast_usbii_deluxe[] = {
-	{ 0x62, KEY_0},
-	{ 0x75, KEY_1},
-	{ 0x76, KEY_2},
-	{ 0x77, KEY_3},
-	{ 0x79, KEY_4},
-	{ 0x7a, KEY_5},
-	{ 0x7b, KEY_6},
-	{ 0x7d, KEY_7},
-	{ 0x7e, KEY_8},
-	{ 0x7f, KEY_9},
-
-	{ 0x38, KEY_CAMERA},		/* SNAPSHOT */
-	{ 0x37, KEY_RECORD},		/* RECORD */
-	{ 0x35, KEY_TIME},		/* TIMESHIFT */
-
-	{ 0x74, KEY_VOLUMEUP},		/* VOLUMEUP */
-	{ 0x78, KEY_VOLUMEDOWN},	/* VOLUMEDOWN */
-	{ 0x64, KEY_MUTE},		/* MUTE */
-
-	{ 0x21, KEY_CHANNEL},		/* SURF */
-	{ 0x7c, KEY_CHANNELUP},		/* CHANNELUP */
-	{ 0x60, KEY_CHANNELDOWN},	/* CHANNELDOWN */
-	{ 0x61, KEY_LAST},		/* LAST CHANNEL (RECALL) */
-
-	{ 0x72, KEY_VIDEO}, 		/* INPUT MODES (TV/FM) */
-
-	{ 0x70, KEY_POWER2},		/* TV ON/OFF */
-
-	{ 0x39, KEY_CYCLEWINDOWS},	/* MINIMIZE (BOSS) */
-	{ 0x3a, KEY_NEW},		/* PIP */
-	{ 0x73, KEY_ZOOM},		/* FULLSECREEN */
-
-	{ 0x66, KEY_INFO},		/* OSD (DISPLAY) */
-
-	{ 0x31, KEY_DOT},		/* '.' */
-	{ 0x63, KEY_ENTER},		/* ENTER */
-
-};
-
-static struct rc_keymap winfast_usbii_deluxe_map = {
-	.map = {
-		.scan    = winfast_usbii_deluxe,
-		.size    = ARRAY_SIZE(winfast_usbii_deluxe),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_WINFAST_USBII_DELUXE,
-	}
-};
-
-static int __init init_rc_map_winfast_usbii_deluxe(void)
-{
-	return ir_register_map(&winfast_usbii_deluxe_map);
-}
-
-static void __exit exit_rc_map_winfast_usbii_deluxe(void)
-{
-	ir_unregister_map(&winfast_usbii_deluxe_map);
-}
-
-module_init(init_rc_map_winfast_usbii_deluxe)
-module_exit(exit_rc_map_winfast_usbii_deluxe)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-winfast.c b/drivers/media/IR/keymaps/rc-winfast.c
deleted file mode 100644
index 0e90a3bd9499..000000000000
--- a/drivers/media/IR/keymaps/rc-winfast.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* winfast.h - Keytable for winfast Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
-
-static struct ir_scancode winfast[] = {
-	/* Keys 0 to 9 */
-	{ 0x12, KEY_0 },
-	{ 0x05, KEY_1 },
-	{ 0x06, KEY_2 },
-	{ 0x07, KEY_3 },
-	{ 0x09, KEY_4 },
-	{ 0x0a, KEY_5 },
-	{ 0x0b, KEY_6 },
-	{ 0x0d, KEY_7 },
-	{ 0x0e, KEY_8 },
-	{ 0x0f, KEY_9 },
-
-	{ 0x00, KEY_POWER },
-	{ 0x1b, KEY_AUDIO },		/* Audio Source */
-	{ 0x02, KEY_TUNER },		/* TV/FM, not on Y0400052 */
-	{ 0x1e, KEY_VIDEO },		/* Video Source */
-	{ 0x16, KEY_INFO },		/* Display information */
-	{ 0x04, KEY_VOLUMEUP },
-	{ 0x08, KEY_VOLUMEDOWN },
-	{ 0x0c, KEY_CHANNELUP },
-	{ 0x10, KEY_CHANNELDOWN },
-	{ 0x03, KEY_ZOOM },		/* fullscreen */
-	{ 0x1f, KEY_TEXT },		/* closed caption/teletext */
-	{ 0x20, KEY_SLEEP },
-	{ 0x29, KEY_CLEAR },		/* boss key */
-	{ 0x14, KEY_MUTE },
-	{ 0x2b, KEY_RED },
-	{ 0x2c, KEY_GREEN },
-	{ 0x2d, KEY_YELLOW },
-	{ 0x2e, KEY_BLUE },
-	{ 0x18, KEY_KPPLUS },		/* fine tune + , not on Y040052 */
-	{ 0x19, KEY_KPMINUS },		/* fine tune - , not on Y040052 */
-	{ 0x2a, KEY_MEDIA },		/* PIP (Picture in picture */
-	{ 0x21, KEY_DOT },
-	{ 0x13, KEY_ENTER },
-	{ 0x11, KEY_LAST },		/* Recall (last channel */
-	{ 0x22, KEY_PREVIOUS },
-	{ 0x23, KEY_PLAYPAUSE },
-	{ 0x24, KEY_NEXT },
-	{ 0x25, KEY_TIME },		/* Time Shifting */
-	{ 0x26, KEY_STOP },
-	{ 0x27, KEY_RECORD },
-	{ 0x28, KEY_SAVE },		/* Screenshot */
-	{ 0x2f, KEY_MENU },
-	{ 0x30, KEY_CANCEL },
-	{ 0x31, KEY_CHANNEL },		/* Channel Surf */
-	{ 0x32, KEY_SUBTITLE },
-	{ 0x33, KEY_LANGUAGE },
-	{ 0x34, KEY_REWIND },
-	{ 0x35, KEY_FASTFORWARD },
-	{ 0x36, KEY_TV },
-	{ 0x37, KEY_RADIO },		/* FM */
-	{ 0x38, KEY_DVD },
-
-	{ 0x1a, KEY_MODE},		/* change to MCE mode on Y04G0051 */
-	{ 0x3e, KEY_F21 },		/* MCE +VOL, on Y04G0033 */
-	{ 0x3a, KEY_F22 },		/* MCE -VOL, on Y04G0033 */
-	{ 0x3b, KEY_F23 },		/* MCE +CH,  on Y04G0033 */
-	{ 0x3f, KEY_F24 }		/* MCE -CH,  on Y04G0033 */
-};
-
-static struct rc_keymap winfast_map = {
-	.map = {
-		.scan    = winfast,
-		.size    = ARRAY_SIZE(winfast),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_WINFAST,
-	}
-};
-
-static int __init init_rc_map_winfast(void)
-{
-	return ir_register_map(&winfast_map);
-}
-
-static void __exit exit_rc_map_winfast(void)
-{
-	ir_unregister_map(&winfast_map);
-}
-
-module_init(init_rc_map_winfast)
-module_exit(exit_rc_map_winfast)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/lirc_dev.c b/drivers/media/IR/lirc_dev.c
deleted file mode 100644
index 756656e17bdd..000000000000
--- a/drivers/media/IR/lirc_dev.c
+++ /dev/null
@@ -1,814 +0,0 @@
-/*
- * LIRC base driver
- *
- * by Artur Lipowski <alipowski@interia.pl>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/ioctl.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/kthread.h>
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/cdev.h>
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-static int debug;
-
-#define IRCTL_DEV_NAME	"BaseRemoteCtl"
-#define NOPLUG		-1
-#define LOGHEAD		"lirc_dev (%s[%d]): "
-
-static dev_t lirc_base_dev;
-
-struct irctl {
-	struct lirc_driver d;
-	int attached;
-	int open;
-
-	struct mutex irctl_lock;
-	struct lirc_buffer *buf;
-	unsigned int chunk_size;
-
-	struct task_struct *task;
-	long jiffies_to_wait;
-};
-
-static DEFINE_MUTEX(lirc_dev_lock);
-
-static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
-
-/* Only used for sysfs but defined to void otherwise */
-static struct class *lirc_class;
-
-/*  helper function
- *  initializes the irctl structure
- */
-static void lirc_irctl_init(struct irctl *ir)
-{
-	mutex_init(&ir->irctl_lock);
-	ir->d.minor = NOPLUG;
-}
-
-static void lirc_irctl_cleanup(struct irctl *ir)
-{
-	dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor);
-
-	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
-
-	if (ir->buf != ir->d.rbuf) {
-		lirc_buffer_free(ir->buf);
-		kfree(ir->buf);
-	}
-	ir->buf = NULL;
-}
-
-/*  helper function
- *  reads key codes from driver and puts them into buffer
- *  returns 0 on success
- */
-static int lirc_add_to_buf(struct irctl *ir)
-{
-	if (ir->d.add_to_buf) {
-		int res = -ENODATA;
-		int got_data = 0;
-
-		/*
-		 * service the device as long as it is returning
-		 * data and we have space
-		 */
-get_data:
-		res = ir->d.add_to_buf(ir->d.data, ir->buf);
-		if (res == 0) {
-			got_data++;
-			goto get_data;
-		}
-
-		if (res == -ENODEV)
-			kthread_stop(ir->task);
-
-		return got_data ? 0 : res;
-	}
-
-	return 0;
-}
-
-/* main function of the polling thread
- */
-static int lirc_thread(void *irctl)
-{
-	struct irctl *ir = irctl;
-
-	dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n",
-		ir->d.name, ir->d.minor);
-
-	do {
-		if (ir->open) {
-			if (ir->jiffies_to_wait) {
-				set_current_state(TASK_INTERRUPTIBLE);
-				schedule_timeout(ir->jiffies_to_wait);
-			}
-			if (kthread_should_stop())
-				break;
-			if (!lirc_add_to_buf(ir))
-				wake_up_interruptible(&ir->buf->wait_poll);
-		} else {
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
-		}
-	} while (!kthread_should_stop());
-
-	dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n",
-		ir->d.name, ir->d.minor);
-
-	return 0;
-}
-
-
-static struct file_operations lirc_dev_fops = {
-	.owner		= THIS_MODULE,
-	.read		= lirc_dev_fop_read,
-	.write		= lirc_dev_fop_write,
-	.poll		= lirc_dev_fop_poll,
-	.unlocked_ioctl	= lirc_dev_fop_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl	= lirc_dev_fop_ioctl,
-#endif
-	.open		= lirc_dev_fop_open,
-	.release	= lirc_dev_fop_close,
-	.llseek		= noop_llseek,
-};
-
-static int lirc_cdev_add(struct irctl *ir)
-{
-	int retval;
-	struct lirc_driver *d = &ir->d;
-	struct cdev *cdev = &cdevs[d->minor];
-
-	if (d->fops) {
-		cdev_init(cdev, d->fops);
-		cdev->owner = d->owner;
-	} else {
-		cdev_init(cdev, &lirc_dev_fops);
-		cdev->owner = THIS_MODULE;
-	}
-	kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
-
-	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
-	if (retval)
-		kobject_put(&cdev->kobj);
-
-	return retval;
-}
-
-int lirc_register_driver(struct lirc_driver *d)
-{
-	struct irctl *ir;
-	int minor;
-	int bytes_in_key;
-	unsigned int chunk_size;
-	unsigned int buffer_size;
-	int err;
-
-	if (!d) {
-		printk(KERN_ERR "lirc_dev: lirc_register_driver: "
-		       "driver pointer must be not NULL!\n");
-		err = -EBADRQC;
-		goto out;
-	}
-
-	if (!d->dev) {
-		printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__);
-		err = -EINVAL;
-		goto out;
-	}
-
-	if (MAX_IRCTL_DEVICES <= d->minor) {
-		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-			"\"minor\" must be between 0 and %d (%d)!\n",
-			MAX_IRCTL_DEVICES-1, d->minor);
-		err = -EBADRQC;
-		goto out;
-	}
-
-	if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
-		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-			"code length in bits for minor (%d) "
-			"must be less than %d!\n",
-			d->minor, BUFLEN * 8);
-		err = -EBADRQC;
-		goto out;
-	}
-
-	dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n",
-		d->sample_rate);
-	if (d->sample_rate) {
-		if (2 > d->sample_rate || HZ < d->sample_rate) {
-			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-				"sample_rate must be between 2 and %d!\n", HZ);
-			err = -EBADRQC;
-			goto out;
-		}
-		if (!d->add_to_buf) {
-			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-				"add_to_buf cannot be NULL when "
-				"sample_rate is set\n");
-			err = -EBADRQC;
-			goto out;
-		}
-	} else if (!(d->fops && d->fops->read) && !d->rbuf) {
-		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-			"fops->read and rbuf cannot all be NULL!\n");
-		err = -EBADRQC;
-		goto out;
-	} else if (!d->rbuf) {
-		if (!(d->fops && d->fops->read && d->fops->poll &&
-		      d->fops->unlocked_ioctl)) {
-			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-				"neither read, poll nor unlocked_ioctl can be NULL!\n");
-			err = -EBADRQC;
-			goto out;
-		}
-	}
-
-	mutex_lock(&lirc_dev_lock);
-
-	minor = d->minor;
-
-	if (minor < 0) {
-		/* find first free slot for driver */
-		for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++)
-			if (!irctls[minor])
-				break;
-		if (MAX_IRCTL_DEVICES == minor) {
-			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-				"no free slots for drivers!\n");
-			err = -ENOMEM;
-			goto out_lock;
-		}
-	} else if (irctls[minor]) {
-		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-			"minor (%d) just registered!\n", minor);
-		err = -EBUSY;
-		goto out_lock;
-	}
-
-	ir = kzalloc(sizeof(struct irctl), GFP_KERNEL);
-	if (!ir) {
-		err = -ENOMEM;
-		goto out_lock;
-	}
-	lirc_irctl_init(ir);
-	irctls[minor] = ir;
-	d->minor = minor;
-
-	if (d->sample_rate) {
-		ir->jiffies_to_wait = HZ / d->sample_rate;
-	} else {
-		/* it means - wait for external event in task queue */
-		ir->jiffies_to_wait = 0;
-	}
-
-	/* some safety check 8-) */
-	d->name[sizeof(d->name)-1] = '\0';
-
-	bytes_in_key = BITS_TO_LONGS(d->code_length) +
-			(d->code_length % 8 ? 1 : 0);
-	buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key;
-	chunk_size  = d->chunk_size  ? d->chunk_size  : bytes_in_key;
-
-	if (d->rbuf) {
-		ir->buf = d->rbuf;
-	} else {
-		ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-		if (!ir->buf) {
-			err = -ENOMEM;
-			goto out_lock;
-		}
-		err = lirc_buffer_init(ir->buf, chunk_size, buffer_size);
-		if (err) {
-			kfree(ir->buf);
-			goto out_lock;
-		}
-	}
-	ir->chunk_size = ir->buf->chunk_size;
-
-	if (d->features == 0)
-		d->features = LIRC_CAN_REC_LIRCCODE;
-
-	ir->d = *d;
-
-	device_create(lirc_class, ir->d.dev,
-		      MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL,
-		      "lirc%u", ir->d.minor);
-
-	if (d->sample_rate) {
-		/* try to fire up polling thread */
-		ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
-		if (IS_ERR(ir->task)) {
-			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
-				"cannot run poll thread for minor = %d\n",
-				d->minor);
-			err = -ECHILD;
-			goto out_sysfs;
-		}
-	}
-
-	err = lirc_cdev_add(ir);
-	if (err)
-		goto out_sysfs;
-
-	ir->attached = 1;
-	mutex_unlock(&lirc_dev_lock);
-
-	dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n",
-		 ir->d.name, ir->d.minor);
-	return minor;
-
-out_sysfs:
-	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
-out_lock:
-	mutex_unlock(&lirc_dev_lock);
-out:
-	return err;
-}
-EXPORT_SYMBOL(lirc_register_driver);
-
-int lirc_unregister_driver(int minor)
-{
-	struct irctl *ir;
-	struct cdev *cdev;
-
-	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
-		printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
-		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
-		return -EBADRQC;
-	}
-
-	ir = irctls[minor];
-	if (!ir) {
-		printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct "
-		       "for minor %d!\n", __func__, minor);
-		return -ENOENT;
-	}
-
-	cdev = &cdevs[minor];
-
-	mutex_lock(&lirc_dev_lock);
-
-	if (ir->d.minor != minor) {
-		printk(KERN_ERR "lirc_dev: %s: minor (%d) device not "
-		       "registered!\n", __func__, minor);
-		mutex_unlock(&lirc_dev_lock);
-		return -ENOENT;
-	}
-
-	/* end up polling thread */
-	if (ir->task)
-		kthread_stop(ir->task);
-
-	dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n",
-		ir->d.name, ir->d.minor);
-
-	ir->attached = 0;
-	if (ir->open) {
-		dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n",
-			ir->d.name, ir->d.minor);
-		wake_up_interruptible(&ir->buf->wait_poll);
-		mutex_lock(&ir->irctl_lock);
-		ir->d.set_use_dec(ir->d.data);
-		module_put(cdev->owner);
-		mutex_unlock(&ir->irctl_lock);
-	} else {
-		lirc_irctl_cleanup(ir);
-		cdev_del(cdev);
-		kfree(ir);
-		irctls[minor] = NULL;
-	}
-
-	mutex_unlock(&lirc_dev_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(lirc_unregister_driver);
-
-int lirc_dev_fop_open(struct inode *inode, struct file *file)
-{
-	struct irctl *ir;
-	struct cdev *cdev;
-	int retval = 0;
-
-	if (iminor(inode) >= MAX_IRCTL_DEVICES) {
-		printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
-		       iminor(inode));
-		return -ENODEV;
-	}
-
-	if (mutex_lock_interruptible(&lirc_dev_lock))
-		return -ERESTARTSYS;
-
-	ir = irctls[iminor(inode)];
-	if (!ir) {
-		retval = -ENODEV;
-		goto error;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor);
-
-	if (ir->d.minor == NOPLUG) {
-		retval = -ENODEV;
-		goto error;
-	}
-
-	if (ir->open) {
-		retval = -EBUSY;
-		goto error;
-	}
-
-	cdev = &cdevs[iminor(inode)];
-	if (try_module_get(cdev->owner)) {
-		ir->open++;
-		retval = ir->d.set_use_inc(ir->d.data);
-
-		if (retval) {
-			module_put(cdev->owner);
-			ir->open--;
-		} else {
-			lirc_buffer_clear(ir->buf);
-		}
-		if (ir->task)
-			wake_up_process(ir->task);
-	}
-
-error:
-	if (ir)
-		dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n",
-			ir->d.name, ir->d.minor, retval);
-
-	mutex_unlock(&lirc_dev_lock);
-
-	nonseekable_open(inode, file);
-
-	return retval;
-}
-EXPORT_SYMBOL(lirc_dev_fop_open);
-
-int lirc_dev_fop_close(struct inode *inode, struct file *file)
-{
-	struct irctl *ir = irctls[iminor(inode)];
-	struct cdev *cdev = &cdevs[iminor(inode)];
-
-	if (!ir) {
-		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
-		return -EINVAL;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
-
-	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
-
-	ir->open--;
-	if (ir->attached) {
-		ir->d.set_use_dec(ir->d.data);
-		module_put(cdev->owner);
-	} else {
-		lirc_irctl_cleanup(ir);
-		cdev_del(cdev);
-		irctls[ir->d.minor] = NULL;
-		kfree(ir);
-	}
-
-	mutex_unlock(&lirc_dev_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(lirc_dev_fop_close);
-
-unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
-{
-	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-	unsigned int ret;
-
-	if (!ir) {
-		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
-		return POLLERR;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
-
-	if (!ir->attached)
-		return POLLERR;
-
-	poll_wait(file, &ir->buf->wait_poll, wait);
-
-	if (ir->buf)
-		if (lirc_buffer_empty(ir->buf))
-			ret = 0;
-		else
-			ret = POLLIN | POLLRDNORM;
-	else
-		ret = POLLERR;
-
-	dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
-		ir->d.name, ir->d.minor, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL(lirc_dev_fop_poll);
-
-long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	__u32 mode;
-	int result = 0;
-	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-
-	if (!ir) {
-		printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__);
-		return -ENODEV;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n",
-		ir->d.name, ir->d.minor, cmd);
-
-	if (ir->d.minor == NOPLUG || !ir->attached) {
-		dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
-			ir->d.name, ir->d.minor);
-		return -ENODEV;
-	}
-
-	mutex_lock(&ir->irctl_lock);
-
-	switch (cmd) {
-	case LIRC_GET_FEATURES:
-		result = put_user(ir->d.features, (__u32 *)arg);
-		break;
-	case LIRC_GET_REC_MODE:
-		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
-			result = -ENOSYS;
-			break;
-		}
-
-		result = put_user(LIRC_REC2MODE
-				  (ir->d.features & LIRC_CAN_REC_MASK),
-				  (__u32 *)arg);
-		break;
-	case LIRC_SET_REC_MODE:
-		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
-			result = -ENOSYS;
-			break;
-		}
-
-		result = get_user(mode, (__u32 *)arg);
-		if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
-			result = -EINVAL;
-		/*
-		 * FIXME: We should actually set the mode somehow but
-		 * for now, lirc_serial doesn't support mode changing either
-		 */
-		break;
-	case LIRC_GET_LENGTH:
-		result = put_user(ir->d.code_length, (__u32 *)arg);
-		break;
-	case LIRC_GET_MIN_TIMEOUT:
-		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
-		    ir->d.min_timeout == 0) {
-			result = -ENOSYS;
-			break;
-		}
-
-		result = put_user(ir->d.min_timeout, (__u32 *)arg);
-		break;
-	case LIRC_GET_MAX_TIMEOUT:
-		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
-		    ir->d.max_timeout == 0) {
-			result = -ENOSYS;
-			break;
-		}
-
-		result = put_user(ir->d.max_timeout, (__u32 *)arg);
-		break;
-	default:
-		result = -EINVAL;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n",
-		ir->d.name, ir->d.minor, result);
-
-	mutex_unlock(&ir->irctl_lock);
-
-	return result;
-}
-EXPORT_SYMBOL(lirc_dev_fop_ioctl);
-
-ssize_t lirc_dev_fop_read(struct file *file,
-			  char *buffer,
-			  size_t length,
-			  loff_t *ppos)
-{
-	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-	unsigned char *buf;
-	int ret = 0, written = 0;
-	DECLARE_WAITQUEUE(wait, current);
-
-	if (!ir) {
-		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
-		return -ENODEV;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor);
-
-	buf = kzalloc(ir->chunk_size, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (mutex_lock_interruptible(&ir->irctl_lock)) {
-		ret = -ERESTARTSYS;
-		goto out_unlocked;
-	}
-	if (!ir->attached) {
-		ret = -ENODEV;
-		goto out_locked;
-	}
-
-	if (length % ir->chunk_size) {
-		ret = -EINVAL;
-		goto out_locked;
-	}
-
-	/*
-	 * we add ourselves to the task queue before buffer check
-	 * to avoid losing scan code (in case when queue is awaken somewhere
-	 * between while condition checking and scheduling)
-	 */
-	add_wait_queue(&ir->buf->wait_poll, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/*
-	 * while we didn't provide 'length' bytes, device is opened in blocking
-	 * mode and 'copy_to_user' is happy, wait for data.
-	 */
-	while (written < length && ret == 0) {
-		if (lirc_buffer_empty(ir->buf)) {
-			/* According to the read(2) man page, 'written' can be
-			 * returned as less than 'length', instead of blocking
-			 * again, returning -EWOULDBLOCK, or returning
-			 * -ERESTARTSYS */
-			if (written)
-				break;
-			if (file->f_flags & O_NONBLOCK) {
-				ret = -EWOULDBLOCK;
-				break;
-			}
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-
-			mutex_unlock(&ir->irctl_lock);
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-
-			if (mutex_lock_interruptible(&ir->irctl_lock)) {
-				ret = -ERESTARTSYS;
-				remove_wait_queue(&ir->buf->wait_poll, &wait);
-				set_current_state(TASK_RUNNING);
-				goto out_unlocked;
-			}
-
-			if (!ir->attached) {
-				ret = -ENODEV;
-				break;
-			}
-		} else {
-			lirc_buffer_read(ir->buf, buf);
-			ret = copy_to_user((void *)buffer+written, buf,
-					   ir->buf->chunk_size);
-			if (!ret)
-				written += ir->buf->chunk_size;
-			else
-				ret = -EFAULT;
-		}
-	}
-
-	remove_wait_queue(&ir->buf->wait_poll, &wait);
-	set_current_state(TASK_RUNNING);
-
-out_locked:
-	mutex_unlock(&ir->irctl_lock);
-
-out_unlocked:
-	kfree(buf);
-	dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
-		ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
-
-	return ret ? ret : written;
-}
-EXPORT_SYMBOL(lirc_dev_fop_read);
-
-void *lirc_get_pdata(struct file *file)
-{
-	void *data = NULL;
-
-	if (file && file->f_dentry && file->f_dentry->d_inode &&
-	    file->f_dentry->d_inode->i_rdev) {
-		struct irctl *ir;
-		ir = irctls[iminor(file->f_dentry->d_inode)];
-		data = ir->d.data;
-	}
-
-	return data;
-}
-EXPORT_SYMBOL(lirc_get_pdata);
-
-
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
-			   size_t length, loff_t *ppos)
-{
-	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-
-	if (!ir) {
-		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
-		return -ENODEV;
-	}
-
-	dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor);
-
-	if (!ir->attached)
-		return -ENODEV;
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(lirc_dev_fop_write);
-
-
-static int __init lirc_dev_init(void)
-{
-	int retval;
-
-	lirc_class = class_create(THIS_MODULE, "lirc");
-	if (IS_ERR(lirc_class)) {
-		retval = PTR_ERR(lirc_class);
-		printk(KERN_ERR "lirc_dev: class_create failed\n");
-		goto error;
-	}
-
-	retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES,
-				     IRCTL_DEV_NAME);
-	if (retval) {
-		class_destroy(lirc_class);
-		printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
-		goto error;
-	}
-
-
-	printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
-	       "major %d \n", MAJOR(lirc_base_dev));
-
-error:
-	return retval;
-}
-
-
-
-static void __exit lirc_dev_exit(void)
-{
-	class_destroy(lirc_class);
-	unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
-	printk(KERN_INFO "lirc_dev: module unloaded\n");
-}
-
-module_init(lirc_dev_init);
-module_exit(lirc_dev_exit);
-
-MODULE_DESCRIPTION("LIRC base driver module");
-MODULE_AUTHOR("Artur Lipowski");
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
deleted file mode 100644
index 392ca24132da..000000000000
--- a/drivers/media/IR/mceusb.c
+++ /dev/null
@@ -1,1333 +0,0 @@
-/*
- * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
- * Conti, Martin Blatter and Daniel Melander, the latter of which was
- * in turn also based on the lirc_atiusb driver by Paul Miller. The
- * two mce drivers were merged into one by Jarod Wilson, with transmit
- * support for the 1st-gen device added primarily by Patrick Calhoun,
- * with a bit of tweaks by Jarod. Debugging improvements and proper
- * support for what appears to be 3rd-gen hardware added by Jarod.
- * Initial port from lirc driver to ir-core drivery by Jarod, based
- * partially on a port to an earlier proposed IR infrastructure by
- * Jon Smirl, which included enhancements and simplifications to the
- * incoming IR buffer parsing routines.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#define DRIVER_VERSION	"1.91"
-#define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
-#define DRIVER_DESC	"Windows Media Center Ed. eHome Infrared Transceiver " \
-			"device driver"
-#define DRIVER_NAME	"mceusb"
-
-#define USB_BUFLEN		32 /* USB reception buffer length */
-#define USB_CTRL_MSG_SZ		2  /* Size of usb ctrl msg on gen1 hw */
-#define MCE_G1_INIT_MSGS	40 /* Init messages on gen1 hw to throw out */
-#define MS_TO_NS(msec)		((msec) * 1000)
-
-/* MCE constants */
-#define MCE_CMDBUF_SIZE		384  /* MCE Command buffer length */
-#define MCE_TIME_UNIT		50   /* Approx 50us resolution */
-#define MCE_CODE_LENGTH		5    /* Normal length of packet (with header) */
-#define MCE_PACKET_SIZE		4    /* Normal length of packet (without header) */
-#define MCE_IRDATA_HEADER	0x84 /* Actual header format is 0x80 + num_bytes */
-#define MCE_IRDATA_TRAILER	0x80 /* End of IR data */
-#define MCE_TX_HEADER_LENGTH	3    /* # of bytes in the initializing tx header */
-#define MCE_MAX_CHANNELS	2    /* Two transmitters, hardware dependent? */
-#define MCE_DEFAULT_TX_MASK	0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
-#define MCE_PULSE_BIT		0x80 /* Pulse bit, MSB set == PULSE else SPACE */
-#define MCE_PULSE_MASK		0x7f /* Pulse mask */
-#define MCE_MAX_PULSE_LENGTH	0x7f /* Longest transmittable pulse symbol */
-
-#define MCE_HW_CMD_HEADER	0xff	/* MCE hardware command header */
-#define MCE_COMMAND_HEADER	0x9f	/* MCE command header */
-#define MCE_COMMAND_MASK	0xe0	/* Mask out command bits */
-#define MCE_COMMAND_NULL	0x00	/* These show up various places... */
-/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
- * then we're looking at a raw IR data sample */
-#define MCE_COMMAND_IRDATA	0x80
-#define MCE_PACKET_LENGTH_MASK	0x1f /* Packet length mask */
-
-/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
-#define MCE_CMD_SIG_END		0x01	/* End of signal */
-#define MCE_CMD_PING		0x03	/* Ping device */
-#define MCE_CMD_UNKNOWN		0x04	/* Unknown */
-#define MCE_CMD_UNKNOWN2	0x05	/* Unknown */
-#define MCE_CMD_S_CARRIER	0x06	/* Set TX carrier frequency */
-#define MCE_CMD_G_CARRIER	0x07	/* Get TX carrier frequency */
-#define MCE_CMD_S_TXMASK	0x08	/* Set TX port bitmask */
-#define MCE_CMD_UNKNOWN3	0x09	/* Unknown */
-#define MCE_CMD_UNKNOWN4	0x0a	/* Unknown */
-#define MCE_CMD_G_REVISION	0x0b	/* Get hw/sw revision */
-#define MCE_CMD_S_TIMEOUT	0x0c	/* Set RX timeout value */
-#define MCE_CMD_G_TIMEOUT	0x0d	/* Get RX timeout value */
-#define MCE_CMD_UNKNOWN5	0x0e	/* Unknown */
-#define MCE_CMD_UNKNOWN6	0x0f	/* Unknown */
-#define MCE_CMD_G_RXPORTSTS	0x11	/* Get RX port status */
-#define MCE_CMD_G_TXMASK	0x13	/* Set TX port bitmask */
-#define MCE_CMD_S_RXSENSOR	0x14	/* Set RX sensor (std/learning) */
-#define MCE_CMD_G_RXSENSOR	0x15	/* Get RX sensor (std/learning) */
-#define MCE_RSP_PULSE_COUNT	0x15	/* RX pulse count (only if learning) */
-#define MCE_CMD_TX_PORTS	0x16	/* Get number of TX ports */
-#define MCE_CMD_G_WAKESRC	0x17	/* Get wake source */
-#define MCE_CMD_UNKNOWN7	0x18	/* Unknown */
-#define MCE_CMD_UNKNOWN8	0x19	/* Unknown */
-#define MCE_CMD_UNKNOWN9	0x1b	/* Unknown */
-#define MCE_CMD_DEVICE_RESET	0xaa	/* Reset the hardware */
-#define MCE_RSP_CMD_INVALID	0xfe	/* Invalid command issued */
-
-
-/* module parameters */
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-/* general constants */
-#define SEND_FLAG_IN_PROGRESS	1
-#define SEND_FLAG_COMPLETE	2
-#define RECV_FLAG_IN_PROGRESS	3
-#define RECV_FLAG_COMPLETE	4
-
-#define MCEUSB_RX		1
-#define MCEUSB_TX		2
-
-#define VENDOR_PHILIPS		0x0471
-#define VENDOR_SMK		0x0609
-#define VENDOR_TATUNG		0x1460
-#define VENDOR_GATEWAY		0x107b
-#define VENDOR_SHUTTLE		0x1308
-#define VENDOR_SHUTTLE2		0x051c
-#define VENDOR_MITSUMI		0x03ee
-#define VENDOR_TOPSEED		0x1784
-#define VENDOR_RICAVISION	0x179d
-#define VENDOR_ITRON		0x195d
-#define VENDOR_FIC		0x1509
-#define VENDOR_LG		0x043e
-#define VENDOR_MICROSOFT	0x045e
-#define VENDOR_FORMOSA		0x147a
-#define VENDOR_FINTEK		0x1934
-#define VENDOR_PINNACLE		0x2304
-#define VENDOR_ECS		0x1019
-#define VENDOR_WISTRON		0x0fb8
-#define VENDOR_COMPRO		0x185b
-#define VENDOR_NORTHSTAR	0x04eb
-#define VENDOR_REALTEK		0x0bda
-#define VENDOR_TIVO		0x105a
-#define VENDOR_CONEXANT		0x0572
-
-enum mceusb_model_type {
-	MCE_GEN2 = 0,		/* Most boards */
-	MCE_GEN1,
-	MCE_GEN3,
-	MCE_GEN2_TX_INV,
-	POLARIS_EVK,
-	CX_HYBRID_TV,
-};
-
-struct mceusb_model {
-	u32 mce_gen1:1;
-	u32 mce_gen2:1;
-	u32 mce_gen3:1;
-	u32 tx_mask_normal:1;
-	u32 is_polaris:1;
-	u32 no_tx:1;
-
-	const char *rc_map;	/* Allow specify a per-board map */
-	const char *name;	/* per-board name */
-};
-
-static const struct mceusb_model mceusb_model[] = {
-	[MCE_GEN1] = {
-		.mce_gen1 = 1,
-		.tx_mask_normal = 1,
-	},
-	[MCE_GEN2] = {
-		.mce_gen2 = 1,
-	},
-	[MCE_GEN2_TX_INV] = {
-		.mce_gen2 = 1,
-		.tx_mask_normal = 1,
-	},
-	[MCE_GEN3] = {
-		.mce_gen3 = 1,
-		.tx_mask_normal = 1,
-	},
-	[POLARIS_EVK] = {
-		.is_polaris = 1,
-		/*
-		 * In fact, the EVK is shipped without
-		 * remotes, but we should have something handy,
-		 * to allow testing it
-		 */
-		.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
-		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
-	},
-	[CX_HYBRID_TV] = {
-		.is_polaris = 1,
-		.no_tx = 1, /* tx isn't wired up at all */
-		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
-	},
-};
-
-static struct usb_device_id mceusb_dev_table[] = {
-	/* Original Microsoft MCE IR Transceiver (often HP-branded) */
-	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d),
-	  .driver_info = MCE_GEN1 },
-	/* Philips Infrared Transceiver - Sahara branded */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
-	/* Philips Infrared Transceiver - HP branded */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x060c),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Philips SRM5100 */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
-	/* Philips Infrared Transceiver - Omaura */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
-	/* Philips Infrared Transceiver - Spinel plus */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
-	/* Philips eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
-	/* Philips/Spinel plus IR transceiver for ASUS */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
-	/* Philips/Spinel plus IR transceiver for ASUS */
-	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
-	/* Realtek MCE IR Receiver */
-	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
-	/* SMK/Toshiba G83C0004D410 */
-	{ USB_DEVICE(VENDOR_SMK, 0x031d),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* SMK eHome Infrared Transceiver (Sony VAIO) */
-	{ USB_DEVICE(VENDOR_SMK, 0x0322),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* bundled with Hauppauge PVR-150 */
-	{ USB_DEVICE(VENDOR_SMK, 0x0334),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* SMK eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
-	/* Tatung eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
-	/* Shuttle eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
-	/* Shuttle eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
-	/* Gateway eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
-	/* Mitsumi */
-	{ USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
-	/* Topseed eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x0001),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Topseed HP eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x0006),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Topseed eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x0007),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Topseed eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008),
-	  .driver_info = MCE_GEN3 },
-	/* Topseed eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x000a),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Topseed eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011),
-	  .driver_info = MCE_GEN2_TX_INV },
-	/* Ricavision internal Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
-	/* Itron ione Libra Q-11 */
-	{ USB_DEVICE(VENDOR_ITRON, 0x7002) },
-	/* FIC eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_FIC, 0x9242) },
-	/* LG eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_LG, 0x9803) },
-	/* Microsoft MCE Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
-	/* Formosa eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
-	/* Formosa21 / eHome Infrared Receiver */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
-	/* Formosa aim / Trust MCE Infrared Receiver */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
-	/* Formosa Industrial Computing / Beanbag Emulation Device */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
-	/* Formosa21 / eHome Infrared Receiver */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
-	/* Formosa Industrial Computing AIM IR605/A */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
-	/* Formosa Industrial Computing */
-	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
-	/* Fintek eHome Infrared Transceiver (HP branded) */
-	{ USB_DEVICE(VENDOR_FINTEK, 0x5168) },
-	/* Fintek eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
-	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
-	{ USB_DEVICE(VENDOR_FINTEK, 0x0702) },
-	/* Pinnacle Remote Kit */
-	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225),
-	  .driver_info = MCE_GEN3 },
-	/* Elitegroup Computer Systems IR */
-	{ USB_DEVICE(VENDOR_ECS, 0x0f38) },
-	/* Wistron Corp. eHome Infrared Receiver */
-	{ USB_DEVICE(VENDOR_WISTRON, 0x0002) },
-	/* Compro K100 */
-	{ USB_DEVICE(VENDOR_COMPRO, 0x3020) },
-	/* Compro K100 v2 */
-	{ USB_DEVICE(VENDOR_COMPRO, 0x3082) },
-	/* Northstar Systems, Inc. eHome Infrared Transceiver */
-	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
-	/* TiVo PC IR Receiver */
-	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
-	/* Conexant Hybrid TV "Shelby" Polaris SDK */
-	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
-	  .driver_info = POLARIS_EVK },
-	/* Conexant Hybrid TV RDU253S Polaris */
-	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
-	  .driver_info = CX_HYBRID_TV },
-	/* Terminating entry */
-	{ }
-};
-
-/* data structure for each usb transceiver */
-struct mceusb_dev {
-	/* ir-core bits */
-	struct ir_dev_props *props;
-
-	/* optional features we can enable */
-	bool carrier_report_enabled;
-	bool learning_enabled;
-
-	/* core device bits */
-	struct device *dev;
-	struct input_dev *idev;
-
-	/* usb */
-	struct usb_device *usbdev;
-	struct urb *urb_in;
-	struct usb_endpoint_descriptor *usb_ep_in;
-	struct usb_endpoint_descriptor *usb_ep_out;
-
-	/* buffers and dma */
-	unsigned char *buf_in;
-	unsigned int len_in;
-	dma_addr_t dma_in;
-	dma_addr_t dma_out;
-
-	enum {
-		CMD_HEADER = 0,
-		SUBCMD,
-		CMD_DATA,
-		PARSE_IRDATA,
-	} parser_state;
-
-	u8 cmd, rem;		/* Remaining IR data bytes in packet */
-
-	struct {
-		u32 connected:1;
-		u32 tx_mask_normal:1;
-		u32 microsoft_gen1:1;
-		u32 no_tx:1;
-	} flags;
-
-	/* transmit support */
-	int send_flags;
-	u32 carrier;
-	unsigned char tx_mask;
-
-	char name[128];
-	char phys[64];
-	enum mceusb_model_type model;
-};
-
-/*
- * MCE Device Command Strings
- * Device command responses vary from device to device...
- * - DEVICE_RESET resets the hardware to its default state
- * - GET_REVISION fetches the hardware/software revision, common
- *   replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
- * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
- *   device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
- *   meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
- *   ((clk / frequency) - 1)
- * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
- *   response in the form of 9f 0c msb lsb
- * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
- *   the form of 9f 08 bm, where bm is the bitmask
- * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
- *   general use one or short-range learning one, in the form of
- *   9f 14 ss, where ss is either 01 for long-range or 02 for short
- * - SET_CARRIER_FREQ sets a new carrier mode and frequency
- * - SET_TX_BITMASK sets the transmitter bitmask
- * - SET_RX_TIMEOUT sets the receiver timeout
- * - SET_RX_SENSOR sets which receiver sensor to use
- */
-static char DEVICE_RESET[]	= {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
-				   MCE_CMD_DEVICE_RESET};
-static char GET_REVISION[]	= {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
-static char GET_UNKNOWN[]	= {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
-static char GET_UNKNOWN2[]	= {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
-static char GET_CARRIER_FREQ[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
-static char GET_RX_TIMEOUT[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
-static char GET_TX_BITMASK[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
-static char GET_RX_SENSOR[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
-/* sub in desired values in lower byte or bytes for full command */
-/* FIXME: make use of these for transmit.
-static char SET_CARRIER_FREQ[]	= {MCE_COMMAND_HEADER,
-				   MCE_CMD_S_CARRIER, 0x00, 0x00};
-static char SET_TX_BITMASK[]	= {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
-static char SET_RX_TIMEOUT[]	= {MCE_COMMAND_HEADER,
-				   MCE_CMD_S_TIMEOUT, 0x00, 0x00};
-static char SET_RX_SENSOR[]	= {MCE_COMMAND_HEADER,
-				   MCE_CMD_S_RXSENSOR, 0x00};
-*/
-
-static int mceusb_cmdsize(u8 cmd, u8 subcmd)
-{
-	int datasize = 0;
-
-	switch (cmd) {
-	case MCE_COMMAND_NULL:
-		if (subcmd == MCE_HW_CMD_HEADER)
-			datasize = 1;
-		break;
-	case MCE_HW_CMD_HEADER:
-		switch (subcmd) {
-		case MCE_CMD_G_REVISION:
-			datasize = 2;
-			break;
-		}
-	case MCE_COMMAND_HEADER:
-		switch (subcmd) {
-		case MCE_CMD_UNKNOWN:
-		case MCE_CMD_S_CARRIER:
-		case MCE_CMD_S_TIMEOUT:
-		case MCE_RSP_PULSE_COUNT:
-			datasize = 2;
-			break;
-		case MCE_CMD_SIG_END:
-		case MCE_CMD_S_TXMASK:
-		case MCE_CMD_S_RXSENSOR:
-			datasize = 1;
-			break;
-		}
-	}
-	return datasize;
-}
-
-static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
-				 int offset, int len, bool out)
-{
-	char codes[USB_BUFLEN * 3 + 1];
-	char inout[9];
-	u8 cmd, subcmd, data1, data2;
-	struct device *dev = ir->dev;
-	int i, start, skip = 0;
-
-	if (!debug)
-		return;
-
-	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
-	if (ir->flags.microsoft_gen1 && !out && !offset)
-		skip = 2;
-
-	if (len <= skip)
-		return;
-
-	for (i = 0; i < len && i < USB_BUFLEN; i++)
-		snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff);
-
-	dev_info(dev, "%sx data: %s(length=%d)\n",
-		 (out ? "t" : "r"), codes, len);
-
-	if (out)
-		strcpy(inout, "Request\0");
-	else
-		strcpy(inout, "Got\0");
-
-	start  = offset + skip;
-	cmd    = buf[start] & 0xff;
-	subcmd = buf[start + 1] & 0xff;
-	data1  = buf[start + 2] & 0xff;
-	data2  = buf[start + 3] & 0xff;
-
-	switch (cmd) {
-	case MCE_COMMAND_NULL:
-		if ((subcmd == MCE_HW_CMD_HEADER) &&
-		    (data1 == MCE_CMD_DEVICE_RESET))
-			dev_info(dev, "Device reset requested\n");
-		else
-			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
-				 cmd, subcmd);
-		break;
-	case MCE_HW_CMD_HEADER:
-		switch (subcmd) {
-		case MCE_CMD_G_REVISION:
-			if (len == 2)
-				dev_info(dev, "Get hw/sw rev?\n");
-			else
-				dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
-					 "0x%02x 0x%02x\n", data1, data2,
-					 buf[start + 4], buf[start + 5]);
-			break;
-		case MCE_CMD_DEVICE_RESET:
-			dev_info(dev, "Device reset requested\n");
-			break;
-		case MCE_RSP_CMD_INVALID:
-			dev_info(dev, "Previous command not supported\n");
-			break;
-		case MCE_CMD_UNKNOWN7:
-		case MCE_CMD_UNKNOWN9:
-		default:
-			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
-				 cmd, subcmd);
-			break;
-		}
-		break;
-	case MCE_COMMAND_HEADER:
-		switch (subcmd) {
-		case MCE_CMD_SIG_END:
-			dev_info(dev, "End of signal\n");
-			break;
-		case MCE_CMD_PING:
-			dev_info(dev, "Ping\n");
-			break;
-		case MCE_CMD_UNKNOWN:
-			dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
-				 data1, data2);
-			break;
-		case MCE_CMD_S_CARRIER:
-			dev_info(dev, "%s carrier mode and freq of "
-				 "0x%02x 0x%02x\n", inout, data1, data2);
-			break;
-		case MCE_CMD_G_CARRIER:
-			dev_info(dev, "Get carrier mode and freq\n");
-			break;
-		case MCE_CMD_S_TXMASK:
-			dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
-				 inout, data1);
-			break;
-		case MCE_CMD_S_TIMEOUT:
-			/* value is in units of 50us, so x*50/100 or x/2 ms */
-			dev_info(dev, "%s receive timeout of %d ms\n",
-				 inout, ((data1 << 8) | data2) / 2);
-			break;
-		case MCE_CMD_G_TIMEOUT:
-			dev_info(dev, "Get receive timeout\n");
-			break;
-		case MCE_CMD_G_TXMASK:
-			dev_info(dev, "Get transmit blaster mask\n");
-			break;
-		case MCE_CMD_S_RXSENSOR:
-			dev_info(dev, "%s %s-range receive sensor in use\n",
-				 inout, data1 == 0x02 ? "short" : "long");
-			break;
-		case MCE_CMD_G_RXSENSOR:
-		/* aka MCE_RSP_PULSE_COUNT */
-			if (out)
-				dev_info(dev, "Get receive sensor\n");
-			else if (ir->learning_enabled)
-				dev_info(dev, "RX pulse count: %d\n",
-					 ((data1 << 8) | data2));
-			break;
-		case MCE_RSP_CMD_INVALID:
-			dev_info(dev, "Error! Hardware is likely wedged...\n");
-			break;
-		case MCE_CMD_UNKNOWN2:
-		case MCE_CMD_UNKNOWN3:
-		case MCE_CMD_UNKNOWN5:
-		default:
-			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
-				 cmd, subcmd);
-			break;
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (cmd == MCE_IRDATA_TRAILER)
-		dev_info(dev, "End of raw IR data\n");
-	else if ((cmd != MCE_COMMAND_HEADER) &&
-		 ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA))
-		dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
-}
-
-static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
-{
-	struct mceusb_dev *ir;
-	int len;
-
-	if (!urb)
-		return;
-
-	ir = urb->context;
-	if (ir) {
-		len = urb->actual_length;
-
-		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
-			urb->status, len);
-
-		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
-	}
-
-}
-
-/* request incoming or send outgoing usb packet - used to initialize remote */
-static void mce_request_packet(struct mceusb_dev *ir,
-			       struct usb_endpoint_descriptor *ep,
-			       unsigned char *data, int size, int urb_type)
-{
-	int res;
-	struct urb *async_urb;
-	struct device *dev = ir->dev;
-	unsigned char *async_buf;
-
-	if (urb_type == MCEUSB_TX) {
-		async_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (unlikely(!async_urb)) {
-			dev_err(dev, "Error, couldn't allocate urb!\n");
-			return;
-		}
-
-		async_buf = kzalloc(size, GFP_KERNEL);
-		if (!async_buf) {
-			dev_err(dev, "Error, couldn't allocate buf!\n");
-			usb_free_urb(async_urb);
-			return;
-		}
-
-		/* outbound data */
-		usb_fill_int_urb(async_urb, ir->usbdev,
-			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
-			async_buf, size, (usb_complete_t)mce_async_callback,
-			ir, ep->bInterval);
-		memcpy(async_buf, data, size);
-
-	} else if (urb_type == MCEUSB_RX) {
-		/* standard request */
-		async_urb = ir->urb_in;
-		ir->send_flags = RECV_FLAG_IN_PROGRESS;
-
-	} else {
-		dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
-		return;
-	}
-
-	dev_dbg(dev, "receive request called (size=%#x)\n", size);
-
-	async_urb->transfer_buffer_length = size;
-	async_urb->dev = ir->usbdev;
-
-	res = usb_submit_urb(async_urb, GFP_ATOMIC);
-	if (res) {
-		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
-		return;
-	}
-	dev_dbg(dev, "receive request complete (res=%d)\n", res);
-}
-
-static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
-{
-	mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
-}
-
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
-{
-	mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
-}
-
-/* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
-{
-	struct mceusb_dev *ir = priv;
-	int i, ret = 0;
-	int count, cmdcount = 0;
-	unsigned char *cmdbuf; /* MCE command buffer */
-	long signal_duration = 0; /* Singnal length in us */
-	struct timeval start_time, end_time;
-
-	do_gettimeofday(&start_time);
-
-	count = n / sizeof(int);
-
-	cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
-	if (!cmdbuf)
-		return -ENOMEM;
-
-	/* MCE tx init header */
-	cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
-	cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
-	cmdbuf[cmdcount++] = ir->tx_mask;
-
-	/* Generate mce packet data */
-	for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
-		signal_duration += txbuf[i];
-		txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
-
-		do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
-
-			/* Insert mce packet header every 4th entry */
-			if ((cmdcount < MCE_CMDBUF_SIZE) &&
-			    (cmdcount - MCE_TX_HEADER_LENGTH) %
-			     MCE_CODE_LENGTH == 0)
-				cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
-
-			/* Insert mce packet data */
-			if (cmdcount < MCE_CMDBUF_SIZE)
-				cmdbuf[cmdcount++] =
-					(txbuf[i] < MCE_PULSE_BIT ?
-					 txbuf[i] : MCE_MAX_PULSE_LENGTH) |
-					 (i & 1 ? 0x00 : MCE_PULSE_BIT);
-			else {
-				ret = -EINVAL;
-				goto out;
-			}
-
-		} while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
-			 (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
-	}
-
-	/* Fix packet length in last header */
-	cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
-		MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) %
-		MCE_CODE_LENGTH - 1;
-
-	/* Check if we have room for the empty packet at the end */
-	if (cmdcount >= MCE_CMDBUF_SIZE) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* All mce commands end with an empty packet (0x80) */
-	cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
-
-	/* Transmit the command to the mce device */
-	mce_async_out(ir, cmdbuf, cmdcount);
-
-	/*
-	 * The lircd gap calculation expects the write function to
-	 * wait the time it takes for the ircommand to be sent before
-	 * it returns.
-	 */
-	do_gettimeofday(&end_time);
-	signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
-			   (end_time.tv_sec - start_time.tv_sec) * 1000000;
-
-	/* delay with the closest number of ticks */
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(usecs_to_jiffies(signal_duration));
-
-out:
-	kfree(cmdbuf);
-	return ret ? ret : n;
-}
-
-/* Sets active IR outputs -- mce devices typically have two */
-static int mceusb_set_tx_mask(void *priv, u32 mask)
-{
-	struct mceusb_dev *ir = priv;
-
-	if (ir->flags.tx_mask_normal)
-		ir->tx_mask = mask;
-	else
-		ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
-				mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
-
-	return 0;
-}
-
-/* Sets the send carrier frequency and mode */
-static int mceusb_set_tx_carrier(void *priv, u32 carrier)
-{
-	struct mceusb_dev *ir = priv;
-	int clk = 10000000;
-	int prescaler = 0, divisor = 0;
-	unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
-				    MCE_CMD_S_CARRIER, 0x00, 0x00 };
-
-	/* Carrier has changed */
-	if (ir->carrier != carrier) {
-
-		if (carrier == 0) {
-			ir->carrier = carrier;
-			cmdbuf[2] = MCE_CMD_SIG_END;
-			cmdbuf[3] = MCE_IRDATA_TRAILER;
-			dev_dbg(ir->dev, "%s: disabling carrier "
-				"modulation\n", __func__);
-			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
-			return carrier;
-		}
-
-		for (prescaler = 0; prescaler < 4; ++prescaler) {
-			divisor = (clk >> (2 * prescaler)) / carrier;
-			if (divisor <= 0xff) {
-				ir->carrier = carrier;
-				cmdbuf[2] = prescaler;
-				cmdbuf[3] = divisor;
-				dev_dbg(ir->dev, "%s: requesting %u HZ "
-					"carrier\n", __func__, carrier);
-
-				/* Transmit new carrier to mce device */
-				mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
-				return carrier;
-			}
-		}
-
-		return -EINVAL;
-
-	}
-
-	return carrier;
-}
-
-/*
- * We don't do anything but print debug spew for many of the command bits
- * we receive from the hardware, but some of them are useful information
- * we want to store so that we can use them.
- */
-static void mceusb_handle_command(struct mceusb_dev *ir, int index)
-{
-	u8 hi = ir->buf_in[index + 1] & 0xff;
-	u8 lo = ir->buf_in[index + 2] & 0xff;
-
-	switch (ir->buf_in[index]) {
-	/* 2-byte return value commands */
-	case MCE_CMD_S_TIMEOUT:
-		ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
-		break;
-
-	/* 1-byte return value commands */
-	case MCE_CMD_S_TXMASK:
-		ir->tx_mask = hi;
-		break;
-	case MCE_CMD_S_RXSENSOR:
-		ir->learning_enabled = (hi == 0x02);
-		break;
-	default:
-		break;
-	}
-}
-
-static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
-{
-	DEFINE_IR_RAW_EVENT(rawir);
-	int i = 0;
-
-	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
-	if (ir->flags.microsoft_gen1)
-		i = 2;
-
-	/* if there's no data, just return now */
-	if (buf_len <= i)
-		return;
-
-	for (; i < buf_len; i++) {
-		switch (ir->parser_state) {
-		case SUBCMD:
-			ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
-			mceusb_dev_printdata(ir, ir->buf_in, i - 1,
-					     ir->rem + 2, false);
-			mceusb_handle_command(ir, i);
-			ir->parser_state = CMD_DATA;
-			break;
-		case PARSE_IRDATA:
-			ir->rem--;
-			rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
-			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
-					 * MS_TO_NS(MCE_TIME_UNIT);
-
-			dev_dbg(ir->dev, "Storing %s with duration %d\n",
-				rawir.pulse ? "pulse" : "space",
-				rawir.duration);
-
-			ir_raw_event_store_with_filter(ir->idev, &rawir);
-			break;
-		case CMD_DATA:
-			ir->rem--;
-			break;
-		case CMD_HEADER:
-			/* decode mce packets of the form (84),AA,BB,CC,DD */
-			/* IR data packets can span USB messages - rem */
-			ir->cmd = ir->buf_in[i];
-			if ((ir->cmd == MCE_COMMAND_HEADER) ||
-			    ((ir->cmd & MCE_COMMAND_MASK) !=
-			     MCE_COMMAND_IRDATA)) {
-				ir->parser_state = SUBCMD;
-				continue;
-			}
-			ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
-			mceusb_dev_printdata(ir, ir->buf_in,
-					     i, ir->rem + 1, false);
-			if (ir->rem)
-				ir->parser_state = PARSE_IRDATA;
-			break;
-		}
-
-		if (ir->parser_state != CMD_HEADER && !ir->rem)
-			ir->parser_state = CMD_HEADER;
-	}
-	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
-	ir_raw_event_handle(ir->idev);
-}
-
-static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
-{
-	struct mceusb_dev *ir;
-	int buf_len;
-
-	if (!urb)
-		return;
-
-	ir = urb->context;
-	if (!ir) {
-		usb_unlink_urb(urb);
-		return;
-	}
-
-	buf_len = urb->actual_length;
-
-	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
-		ir->send_flags = SEND_FLAG_COMPLETE;
-		dev_dbg(ir->dev, "setup answer received %d bytes\n",
-			buf_len);
-	}
-
-	switch (urb->status) {
-	/* success */
-	case 0:
-		mceusb_process_ir_data(ir, buf_len);
-		break;
-
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		usb_unlink_urb(urb);
-		return;
-
-	case -EPIPE:
-	default:
-		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
-		break;
-	}
-
-	usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static void mceusb_gen1_init(struct mceusb_dev *ir)
-{
-	int ret;
-	int maxp = ir->len_in;
-	struct device *dev = ir->dev;
-	char *data;
-
-	data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
-	if (!data) {
-		dev_err(dev, "%s: memory allocation failed!\n", __func__);
-		return;
-	}
-
-	/*
-	 * This is a strange one. Windows issues a set address to the device
-	 * on the receive control pipe and expect a certain value pair back
-	 */
-	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
-			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
-			      data, USB_CTRL_MSG_SZ, HZ * 3);
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
-		__func__, data[0], data[1]);
-
-	/* set feature: bit rate 38400 bps */
-	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
-			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
-			      0xc04e, 0x0000, NULL, 0, HZ * 3);
-
-	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-
-	/* bRequest 4: set char length to 8 bits */
-	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
-			      4, USB_TYPE_VENDOR,
-			      0x0808, 0x0000, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
-
-	/* bRequest 2: set handshaking to use DTR/DSR */
-	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
-			      2, USB_TYPE_VENDOR,
-			      0x0000, 0x0100, NULL, 0, HZ * 3);
-	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
-
-	/* device reset */
-	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
-
-	/* get hw/sw revision? */
-	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
-
-	kfree(data);
-};
-
-static void mceusb_gen2_init(struct mceusb_dev *ir)
-{
-	int maxp = ir->len_in;
-
-	/* device reset */
-	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
-	mce_sync_in(ir, NULL, maxp);
-
-	/* get hw/sw revision? */
-	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
-	mce_sync_in(ir, NULL, maxp);
-
-	/* unknown what the next two actually return... */
-	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
-	mce_sync_in(ir, NULL, maxp);
-	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
-	mce_sync_in(ir, NULL, maxp);
-}
-
-static void mceusb_get_parameters(struct mceusb_dev *ir)
-{
-	int maxp = ir->len_in;
-
-	/* get the carrier and frequency */
-	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
-	mce_sync_in(ir, NULL, maxp);
-
-	if (!ir->flags.no_tx) {
-		/* get the transmitter bitmask */
-		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-		mce_sync_in(ir, NULL, maxp);
-	}
-
-	/* get receiver timeout value */
-	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
-	mce_sync_in(ir, NULL, maxp);
-
-	/* get receiver sensor setting */
-	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
-	mce_sync_in(ir, NULL, maxp);
-}
-
-static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
-{
-	struct input_dev *idev;
-	struct ir_dev_props *props;
-	struct device *dev = ir->dev;
-	const char *rc_map = RC_MAP_RC6_MCE;
-	const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
-	int ret = -ENODEV;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
-
-	ret = -ENOMEM;
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
-	}
-
-	if (mceusb_model[ir->model].name)
-		name = mceusb_model[ir->model].name;
-
-	snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
-		 name,
-		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
-		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
-
-	idev->name = ir->name;
-	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
-	strlcat(ir->phys, "/input0", sizeof(ir->phys));
-	idev->phys = ir->phys;
-
-	props->priv = ir;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->timeout = MS_TO_NS(1000);
-	if (!ir->flags.no_tx) {
-		props->s_tx_mask = mceusb_set_tx_mask;
-		props->s_tx_carrier = mceusb_set_tx_carrier;
-		props->tx_ir = mceusb_tx_ir;
-	}
-
-	ir->props = props;
-
-	usb_to_input_id(ir->usbdev, &idev->id);
-	idev->dev.parent = ir->dev;
-
-	if (mceusb_model[ir->model].rc_map)
-		rc_map = mceusb_model[ir->model].rc_map;
-
-	ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
-	if (ret < 0) {
-		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
-	}
-
-	return idev;
-
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
-	return NULL;
-}
-
-static int __devinit mceusb_dev_probe(struct usb_interface *intf,
-				      const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *idesc;
-	struct usb_endpoint_descriptor *ep = NULL;
-	struct usb_endpoint_descriptor *ep_in = NULL;
-	struct usb_endpoint_descriptor *ep_out = NULL;
-	struct mceusb_dev *ir = NULL;
-	int pipe, maxp, i;
-	char buf[63], name[128] = "";
-	enum mceusb_model_type model = id->driver_info;
-	bool is_gen3;
-	bool is_microsoft_gen1;
-	bool tx_mask_normal;
-	bool is_polaris;
-
-	dev_dbg(&intf->dev, "%s called\n", __func__);
-
-	idesc  = intf->cur_altsetting;
-
-	is_gen3 = mceusb_model[model].mce_gen3;
-	is_microsoft_gen1 = mceusb_model[model].mce_gen1;
-	tx_mask_normal = mceusb_model[model].tx_mask_normal;
-	is_polaris = mceusb_model[model].is_polaris;
-
-	if (is_polaris) {
-		/* Interface 0 is IR */
-		if (idesc->desc.bInterfaceNumber)
-			return -ENODEV;
-	}
-
-	/* step through the endpoints to find first bulk in and out endpoint */
-	for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
-		ep = &idesc->endpoint[i].desc;
-
-		if ((ep_in == NULL)
-			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-			    == USB_DIR_IN)
-			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-			    == USB_ENDPOINT_XFER_BULK)
-			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-			    == USB_ENDPOINT_XFER_INT))) {
-
-			ep_in = ep;
-			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
-			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable inbound endpoint "
-				"found\n");
-		}
-
-		if ((ep_out == NULL)
-			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-			    == USB_DIR_OUT)
-			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-			    == USB_ENDPOINT_XFER_BULK)
-			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-			    == USB_ENDPOINT_XFER_INT))) {
-
-			ep_out = ep;
-			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
-			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, "acceptable outbound endpoint "
-				"found\n");
-		}
-	}
-	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
-		return -ENODEV;
-	}
-
-	pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-	ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
-	if (!ir)
-		goto mem_alloc_fail;
-
-	ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
-	if (!ir->buf_in)
-		goto buf_in_alloc_fail;
-
-	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!ir->urb_in)
-		goto urb_in_alloc_fail;
-
-	ir->usbdev = dev;
-	ir->dev = &intf->dev;
-	ir->len_in = maxp;
-	ir->flags.microsoft_gen1 = is_microsoft_gen1;
-	ir->flags.tx_mask_normal = tx_mask_normal;
-	ir->flags.no_tx = mceusb_model[model].no_tx;
-	ir->model = model;
-
-	/* Saving usb interface data for use by the transmitter routine */
-	ir->usb_ep_in = ep_in;
-	ir->usb_ep_out = ep_out;
-
-	if (dev->descriptor.iManufacturer
-	    && usb_string(dev, dev->descriptor.iManufacturer,
-			  buf, sizeof(buf)) > 0)
-		strlcpy(name, buf, sizeof(name));
-	if (dev->descriptor.iProduct
-	    && usb_string(dev, dev->descriptor.iProduct,
-			  buf, sizeof(buf)) > 0)
-		snprintf(name + strlen(name), sizeof(name) - strlen(name),
-			 " %s", buf);
-
-	ir->idev = mceusb_init_input_dev(ir);
-	if (!ir->idev)
-		goto input_dev_fail;
-
-	/* flush buffers on the device */
-	mce_sync_in(ir, NULL, maxp);
-	mce_sync_in(ir, NULL, maxp);
-
-	/* wire up inbound data handler */
-	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
-		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
-	ir->urb_in->transfer_dma = ir->dma_in;
-	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* initialize device */
-	if (ir->flags.microsoft_gen1)
-		mceusb_gen1_init(ir);
-	else if (!is_gen3)
-		mceusb_gen2_init(ir);
-
-	mceusb_get_parameters(ir);
-
-	if (!ir->flags.no_tx)
-		mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
-
-	usb_set_intfdata(intf, ir);
-
-	dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
-		 dev->bus->busnum, dev->devnum);
-
-	return 0;
-
-	/* Error-handling path */
-input_dev_fail:
-	usb_free_urb(ir->urb_in);
-urb_in_alloc_fail:
-	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
-buf_in_alloc_fail:
-	kfree(ir);
-mem_alloc_fail:
-	dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
-
-	return -ENOMEM;
-}
-
-
-static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct mceusb_dev *ir = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-
-	if (!ir)
-		return;
-
-	ir->usbdev = NULL;
-	ir_input_unregister(ir->idev);
-	usb_kill_urb(ir->urb_in);
-	usb_free_urb(ir->urb_in);
-	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
-
-	kfree(ir);
-}
-
-static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct mceusb_dev *ir = usb_get_intfdata(intf);
-	dev_info(ir->dev, "suspend\n");
-	usb_kill_urb(ir->urb_in);
-	return 0;
-}
-
-static int mceusb_dev_resume(struct usb_interface *intf)
-{
-	struct mceusb_dev *ir = usb_get_intfdata(intf);
-	dev_info(ir->dev, "resume\n");
-	if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
-		return -EIO;
-	return 0;
-}
-
-static struct usb_driver mceusb_dev_driver = {
-	.name =		DRIVER_NAME,
-	.probe =	mceusb_dev_probe,
-	.disconnect =	mceusb_dev_disconnect,
-	.suspend =	mceusb_dev_suspend,
-	.resume =	mceusb_dev_resume,
-	.reset_resume =	mceusb_dev_resume,
-	.id_table =	mceusb_dev_table
-};
-
-static int __init mceusb_dev_init(void)
-{
-	int ret;
-
-	ret = usb_register(&mceusb_dev_driver);
-	if (ret < 0)
-		printk(KERN_ERR DRIVER_NAME
-		       ": usb register failed, result = %d\n", ret);
-
-	return ret;
-}
-
-static void __exit mceusb_dev_exit(void)
-{
-	usb_deregister(&mceusb_dev_driver);
-}
-
-module_init(mceusb_dev_init);
-module_exit(mceusb_dev_exit);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/media/IR/nuvoton-cir.c b/drivers/media/IR/nuvoton-cir.c
deleted file mode 100644
index acc729c79cec..000000000000
--- a/drivers/media/IR/nuvoton-cir.c
+++ /dev/null
@@ -1,1252 +0,0 @@
-/*
- * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
- *
- * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
- * Copyright (C) 2009 Nuvoton PS Team
- *
- * Special thanks to Nuvoton for providing hardware, spec sheets and
- * sample code upon which portions of this driver are based. Indirect
- * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
- * modeled after.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <linux/pci_ids.h>
-
-#include "nuvoton-cir.h"
-
-static char *chip_id = "w836x7hg";
-
-/* write val to config reg */
-static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg)
-{
-	outb(reg, nvt->cr_efir);
-	outb(val, nvt->cr_efdr);
-}
-
-/* read val from config reg */
-static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg)
-{
-	outb(reg, nvt->cr_efir);
-	return inb(nvt->cr_efdr);
-}
-
-/* update config register bit without changing other bits */
-static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
-{
-	u8 tmp = nvt_cr_read(nvt, reg) | val;
-	nvt_cr_write(nvt, tmp, reg);
-}
-
-/* clear config register bit without changing other bits */
-static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
-{
-	u8 tmp = nvt_cr_read(nvt, reg) & ~val;
-	nvt_cr_write(nvt, tmp, reg);
-}
-
-/* enter extended function mode */
-static inline void nvt_efm_enable(struct nvt_dev *nvt)
-{
-	/* Enabling Extended Function Mode explicitly requires writing 2x */
-	outb(EFER_EFM_ENABLE, nvt->cr_efir);
-	outb(EFER_EFM_ENABLE, nvt->cr_efir);
-}
-
-/* exit extended function mode */
-static inline void nvt_efm_disable(struct nvt_dev *nvt)
-{
-	outb(EFER_EFM_DISABLE, nvt->cr_efir);
-}
-
-/*
- * When you want to address a specific logical device, write its logical
- * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
- * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
- */
-static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
-{
-	outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
-	outb(ldev, nvt->cr_efdr);
-}
-
-/* write val to cir config register */
-static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset)
-{
-	outb(val, nvt->cir_addr + offset);
-}
-
-/* read val from cir config register */
-static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset)
-{
-	u8 val;
-
-	val = inb(nvt->cir_addr + offset);
-
-	return val;
-}
-
-/* write val to cir wake register */
-static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt,
-					  u8 val, u8 offset)
-{
-	outb(val, nvt->cir_wake_addr + offset);
-}
-
-/* read val from cir wake config register */
-static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset)
-{
-	u8 val;
-
-	val = inb(nvt->cir_wake_addr + offset);
-
-	return val;
-}
-
-#define pr_reg(text, ...) \
-	printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__)
-
-/* dump current cir register contents */
-static void cir_dump_regs(struct nvt_dev *nvt)
-{
-	nvt_efm_enable(nvt);
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-
-	pr_reg("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME);
-	pr_reg(" * CR CIR ACTIVE :   0x%x\n",
-	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
-	pr_reg(" * CR CIR BASE ADDR: 0x%x\n",
-	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
-		nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
-	pr_reg(" * CR CIR IRQ NUM:   0x%x\n",
-	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
-
-	nvt_efm_disable(nvt);
-
-	pr_reg("%s: Dump CIR registers:\n", NVT_DRIVER_NAME);
-	pr_reg(" * IRCON:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON));
-	pr_reg(" * IRSTS:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS));
-	pr_reg(" * IREN:      0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN));
-	pr_reg(" * RXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT));
-	pr_reg(" * CP:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CP));
-	pr_reg(" * CC:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CC));
-	pr_reg(" * SLCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH));
-	pr_reg(" * SLCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL));
-	pr_reg(" * FIFOCON:   0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON));
-	pr_reg(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS));
-	pr_reg(" * SRXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO));
-	pr_reg(" * TXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT));
-	pr_reg(" * STXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO));
-	pr_reg(" * FCCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH));
-	pr_reg(" * FCCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL));
-	pr_reg(" * IRFSM:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM));
-}
-
-/* dump current cir wake register contents */
-static void cir_wake_dump_regs(struct nvt_dev *nvt)
-{
-	u8 i, fifo_len;
-
-	nvt_efm_enable(nvt);
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
-
-	pr_reg("%s: Dump CIR WAKE logical device registers:\n",
-	       NVT_DRIVER_NAME);
-	pr_reg(" * CR CIR WAKE ACTIVE :   0x%x\n",
-	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
-	pr_reg(" * CR CIR WAKE BASE ADDR: 0x%x\n",
-	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
-		nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
-	pr_reg(" * CR CIR WAKE IRQ NUM:   0x%x\n",
-	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
-
-	nvt_efm_disable(nvt);
-
-	pr_reg("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME);
-	pr_reg(" * IRCON:          0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON));
-	pr_reg(" * IRSTS:          0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS));
-	pr_reg(" * IREN:           0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN));
-	pr_reg(" * FIFO CMP DEEP:  0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP));
-	pr_reg(" * FIFO CMP TOL:   0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL));
-	pr_reg(" * FIFO COUNT:     0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT));
-	pr_reg(" * SLCH:           0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH));
-	pr_reg(" * SLCL:           0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL));
-	pr_reg(" * FIFOCON:        0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON));
-	pr_reg(" * SRXFSTS:        0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS));
-	pr_reg(" * SAMPLE RX FIFO: 0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO));
-	pr_reg(" * WR FIFO DATA:   0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA));
-	pr_reg(" * RD FIFO ONLY:   0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
-	pr_reg(" * RD FIFO ONLY IDX: 0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX));
-	pr_reg(" * FIFO IGNORE:    0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE));
-	pr_reg(" * IRFSM:          0x%x\n",
-	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM));
-
-	fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
-	pr_reg("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len);
-	pr_reg("* Contents = ");
-	for (i = 0; i < fifo_len; i++)
-		printk(KERN_CONT "%02x ",
-		       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
-	printk(KERN_CONT "\n");
-}
-
-/* detect hardware features */
-static int nvt_hw_detect(struct nvt_dev *nvt)
-{
-	unsigned long flags;
-	u8 chip_major, chip_minor;
-	int ret = 0;
-
-	nvt_efm_enable(nvt);
-
-	/* Check if we're wired for the alternate EFER setup */
-	chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
-	if (chip_major == 0xff) {
-		nvt->cr_efir = CR_EFIR2;
-		nvt->cr_efdr = CR_EFDR2;
-		nvt_efm_enable(nvt);
-		chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
-	}
-
-	chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
-	nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
-
-	if (chip_major != CHIP_ID_HIGH &&
-	    (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
-		ret = -ENODEV;
-
-	nvt_efm_disable(nvt);
-
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->chip_major = chip_major;
-	nvt->chip_minor = chip_minor;
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
-	return ret;
-}
-
-static void nvt_cir_ldev_init(struct nvt_dev *nvt)
-{
-	u8 val;
-
-	/* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */
-	val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL);
-	val &= OUTPUT_PIN_SEL_MASK;
-	val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB);
-	nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL);
-
-	/* Select CIR logical device and enable */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
-	nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
-
-	nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
-
-	nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
-		nvt->cir_addr, nvt->cir_irq);
-}
-
-static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
-{
-	/* Select ACPI logical device, enable it and CIR Wake */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	/* Enable CIR Wake via PSOUT# (Pin60) */
-	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
-
-	/* enable cir interrupt of mouse/keyboard IRQ event */
-	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
-
-	/* enable pme interrupt of cir wakeup event */
-	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
-
-	/* Select CIR Wake logical device and enable */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
-	nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
-
-	nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
-
-	nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
-		nvt->cir_wake_addr, nvt->cir_wake_irq);
-}
-
-/* clear out the hardware's cir rx fifo */
-static void nvt_clear_cir_fifo(struct nvt_dev *nvt)
-{
-	u8 val;
-
-	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
-	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
-}
-
-/* clear out the hardware's cir wake rx fifo */
-static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
-{
-	u8 val;
-
-	val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
-	nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
-			       CIR_WAKE_FIFOCON);
-}
-
-/* clear out the hardware's cir tx fifo */
-static void nvt_clear_tx_fifo(struct nvt_dev *nvt)
-{
-	u8 val;
-
-	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
-	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON);
-}
-
-/* enable RX Trigger Level Reach and Packet End interrupts */
-static void nvt_set_cir_iren(struct nvt_dev *nvt)
-{
-	u8 iren;
-
-	iren = CIR_IREN_RTR | CIR_IREN_PE;
-	nvt_cir_reg_write(nvt, iren, CIR_IREN);
-}
-
-static void nvt_cir_regs_init(struct nvt_dev *nvt)
-{
-	/* set sample limit count (PE interrupt raised when reached) */
-	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
-	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
-
-	/* set fifo irq trigger levels */
-	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV |
-			  CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON);
-
-	/*
-	 * Enable TX and RX, specify carrier on = low, off = high, and set
-	 * sample period (currently 50us)
-	 */
-	nvt_cir_reg_write(nvt,
-			  CIR_IRCON_TXEN | CIR_IRCON_RXEN |
-			  CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
-			  CIR_IRCON);
-
-	/* clear hardware rx and tx fifos */
-	nvt_clear_cir_fifo(nvt);
-	nvt_clear_tx_fifo(nvt);
-
-	/* clear any and all stray interrupts */
-	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
-	/* and finally, enable interrupts */
-	nvt_set_cir_iren(nvt);
-}
-
-static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
-{
-	/* set number of bytes needed for wake key comparison (default 67) */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
-
-	/* set tolerance/variance allowed per byte during wake compare */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
-			       CIR_WAKE_FIFO_CMP_TOL);
-
-	/* set sample limit count (PE interrupt raised when reached) */
-	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
-	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
-
-	/* set cir wake fifo rx trigger level (currently 67) */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
-			       CIR_WAKE_FIFOCON);
-
-	/*
-	 * Enable TX and RX, specific carrier on = low, off = high, and set
-	 * sample period (currently 50us)
-	 */
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
-			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
-			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
-			       CIR_WAKE_IRCON);
-
-	/* clear cir wake rx fifo */
-	nvt_clear_cir_wake_fifo(nvt);
-
-	/* clear any and all stray interrupts */
-	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
-}
-
-static void nvt_enable_wake(struct nvt_dev *nvt)
-{
-	nvt_efm_enable(nvt);
-
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
-	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
-	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
-	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
-
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_efm_disable(nvt);
-
-	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
-			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
-			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
-			       CIR_WAKE_IRCON);
-	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
-	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
-}
-
-/* rx carrier detect only works in learning mode, must be called w/nvt_lock */
-static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
-{
-	u32 count, carrier, duration = 0;
-	int i;
-
-	count = nvt_cir_reg_read(nvt, CIR_FCCL) |
-		nvt_cir_reg_read(nvt, CIR_FCCH) << 8;
-
-	for (i = 0; i < nvt->pkts; i++) {
-		if (nvt->buf[i] & BUF_PULSE_BIT)
-			duration += nvt->buf[i] & BUF_LEN_MASK;
-	}
-
-	duration *= SAMPLE_PERIOD;
-
-	if (!count || !duration) {
-		nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)",
-		       count, duration);
-		return 0;
-	}
-
-	carrier = (count * 1000000) / duration;
-
-	if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER))
-		nvt_dbg("WTF? Carrier frequency out of range!");
-
-	nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
-		carrier, count, duration);
-
-	return carrier;
-}
-
-/*
- * set carrier frequency
- *
- * set carrier on 2 registers: CP & CC
- * always set CP as 0x81
- * set CC by SPEC, CC = 3MHz/carrier - 1
- */
-static int nvt_set_tx_carrier(void *data, u32 carrier)
-{
-	struct nvt_dev *nvt = data;
-	u16 val;
-
-	nvt_cir_reg_write(nvt, 1, CIR_CP);
-	val = 3000000 / (carrier) - 1;
-	nvt_cir_reg_write(nvt, val & 0xff, CIR_CC);
-
-	nvt_dbg("cp: 0x%x cc: 0x%x\n",
-		nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC));
-
-	return 0;
-}
-
-/*
- * nvt_tx_ir
- *
- * 1) clean TX fifo first (handled by AP)
- * 2) copy data from user space
- * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
- * 4) send 9 packets to TX FIFO to open TTR
- * in interrupt_handler:
- * 5) send all data out
- * go back to write():
- * 6) disable TX interrupts, re-enable RX interupts
- *
- * The key problem of this function is user space data may larger than
- * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
- * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
- * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
- * set TXFCONT as 0xff, until buf_count less than 0xff.
- */
-static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
-{
-	struct nvt_dev *nvt = priv;
-	unsigned long flags;
-	size_t cur_count;
-	unsigned int i;
-	u8 iren;
-	int ret;
-
-	spin_lock_irqsave(&nvt->tx.lock, flags);
-
-	if (n >= TX_BUF_LEN) {
-		nvt->tx.buf_count = cur_count = TX_BUF_LEN;
-		ret = TX_BUF_LEN;
-	} else {
-		nvt->tx.buf_count = cur_count = n;
-		ret = n;
-	}
-
-	memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
-
-	nvt->tx.cur_buf_num = 0;
-
-	/* save currently enabled interrupts */
-	iren = nvt_cir_reg_read(nvt, CIR_IREN);
-
-	/* now disable all interrupts, save TFU & TTR */
-	nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
-
-	nvt->tx.tx_state = ST_TX_REPLY;
-
-	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
-			  CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
-
-	/* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
-	for (i = 0; i < 9; i++)
-		nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
-
-	spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
-	wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
-
-	spin_lock_irqsave(&nvt->tx.lock, flags);
-	nvt->tx.tx_state = ST_TX_NONE;
-	spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
-	/* restore enabled interrupts to prior state */
-	nvt_cir_reg_write(nvt, iren, CIR_IREN);
-
-	return ret;
-}
-
-/* dump contents of the last rx buffer we got from the hw rx fifo */
-static void nvt_dump_rx_buf(struct nvt_dev *nvt)
-{
-	int i;
-
-	printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts);
-	for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++)
-		printk(KERN_CONT "0x%02x ", nvt->buf[i]);
-	printk(KERN_CONT "\n");
-}
-
-/*
- * Process raw data in rx driver buffer, store it in raw IR event kfifo,
- * trigger decode when appropriate.
- *
- * We get IR data samples one byte at a time. If the msb is set, its a pulse,
- * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
- * (default 50us) intervals for that pulse/space. A discrete signal is
- * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
- * to signal more IR coming (repeats) or end of IR, respectively. We store
- * sample data in the raw event kfifo until we see 0x7<something> (except f)
- * or 0x80, at which time, we trigger a decode operation.
- */
-static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
-{
-	DEFINE_IR_RAW_EVENT(rawir);
-	unsigned int count;
-	u32 carrier;
-	u8 sample;
-	int i;
-
-	nvt_dbg_verbose("%s firing", __func__);
-
-	if (debug)
-		nvt_dump_rx_buf(nvt);
-
-	if (nvt->carrier_detect_enabled)
-		carrier = nvt_rx_carrier_detect(nvt);
-
-	count = nvt->pkts;
-	nvt_dbg_verbose("Processing buffer of len %d", count);
-
-	init_ir_raw_event(&rawir);
-
-	for (i = 0; i < count; i++) {
-		nvt->pkts--;
-		sample = nvt->buf[i];
-
-		rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
-		rawir.duration = (sample & BUF_LEN_MASK)
-					* SAMPLE_PERIOD * 1000;
-
-		if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
-			if (nvt->rawir.pulse == rawir.pulse)
-				nvt->rawir.duration += rawir.duration;
-			else {
-				nvt->rawir.duration = rawir.duration;
-				nvt->rawir.pulse = rawir.pulse;
-			}
-			continue;
-		}
-
-		rawir.duration += nvt->rawir.duration;
-
-		init_ir_raw_event(&nvt->rawir);
-		nvt->rawir.duration = 0;
-		nvt->rawir.pulse = rawir.pulse;
-
-		if (sample == BUF_PULSE_BIT)
-			rawir.pulse = false;
-
-		if (rawir.duration) {
-			nvt_dbg("Storing %s with duration %d",
-				rawir.pulse ? "pulse" : "space",
-				rawir.duration);
-
-			ir_raw_event_store(nvt->rdev, &rawir);
-		}
-
-		/*
-		 * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
-		 * indicates end of IR signal, but new data incoming. In both
-		 * cases, it means we're ready to call ir_raw_event_handle
-		 */
-		if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
-			nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
-			ir_raw_event_handle(nvt->rdev);
-		}
-	}
-
-	nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
-	ir_raw_event_handle(nvt->rdev);
-
-	if (nvt->pkts) {
-		nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
-		nvt->pkts = 0;
-	}
-
-	nvt_dbg_verbose("%s done", __func__);
-}
-
-static void nvt_handle_rx_fifo_overrun(struct nvt_dev *nvt)
-{
-	nvt_pr(KERN_WARNING, "RX FIFO overrun detected, flushing data!");
-
-	nvt->pkts = 0;
-	nvt_clear_cir_fifo(nvt);
-	ir_raw_event_reset(nvt->rdev);
-}
-
-/* copy data from hardware rx fifo into driver buffer */
-static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
-{
-	unsigned long flags;
-	u8 fifocount, val;
-	unsigned int b_idx;
-	bool overrun = false;
-	int i;
-
-	/* Get count of how many bytes to read from RX FIFO */
-	fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT);
-	/* if we get 0xff, probably means the logical dev is disabled */
-	if (fifocount == 0xff)
-		return;
-	/* watch out for a fifo overrun condition */
-	else if (fifocount > RX_BUF_LEN) {
-		overrun = true;
-		fifocount = RX_BUF_LEN;
-	}
-
-	nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
-
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-
-	b_idx = nvt->pkts;
-
-	/* This should never happen, but lets check anyway... */
-	if (b_idx + fifocount > RX_BUF_LEN) {
-		nvt_process_rx_ir_data(nvt);
-		b_idx = 0;
-	}
-
-	/* Read fifocount bytes from CIR Sample RX FIFO register */
-	for (i = 0; i < fifocount; i++) {
-		val = nvt_cir_reg_read(nvt, CIR_SRXFIFO);
-		nvt->buf[b_idx + i] = val;
-	}
-
-	nvt->pkts += fifocount;
-	nvt_dbg("%s: pkts now %d", __func__, nvt->pkts);
-
-	nvt_process_rx_ir_data(nvt);
-
-	if (overrun)
-		nvt_handle_rx_fifo_overrun(nvt);
-
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-}
-
-static void nvt_cir_log_irqs(u8 status, u8 iren)
-{
-	nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
-		status, iren,
-		status & CIR_IRSTS_RDR	? " RDR"	: "",
-		status & CIR_IRSTS_RTR	? " RTR"	: "",
-		status & CIR_IRSTS_PE	? " PE"		: "",
-		status & CIR_IRSTS_RFO	? " RFO"	: "",
-		status & CIR_IRSTS_TE	? " TE"		: "",
-		status & CIR_IRSTS_TTR	? " TTR"	: "",
-		status & CIR_IRSTS_TFU	? " TFU"	: "",
-		status & CIR_IRSTS_GH	? " GH"		: "",
-		status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE |
-			   CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR |
-			   CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
-}
-
-static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
-{
-	unsigned long flags;
-	bool tx_inactive;
-	u8 tx_state;
-
-	spin_lock_irqsave(&nvt->tx.lock, flags);
-	tx_state = nvt->tx.tx_state;
-	spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
-	tx_inactive = (tx_state == ST_TX_NONE);
-
-	return tx_inactive;
-}
-
-/* interrupt service routine for incoming and outgoing CIR data */
-static irqreturn_t nvt_cir_isr(int irq, void *data)
-{
-	struct nvt_dev *nvt = data;
-	u8 status, iren, cur_state;
-	unsigned long flags;
-
-	nvt_dbg_verbose("%s firing", __func__);
-
-	nvt_efm_enable(nvt);
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_efm_disable(nvt);
-
-	/*
-	 * Get IR Status register contents. Write 1 to ack/clear
-	 *
-	 * bit: reg name      - description
-	 *   7: CIR_IRSTS_RDR - RX Data Ready
-	 *   6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
-	 *   5: CIR_IRSTS_PE  - Packet End
-	 *   4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
-	 *   3: CIR_IRSTS_TE  - TX FIFO Empty
-	 *   2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
-	 *   1: CIR_IRSTS_TFU - TX FIFO Underrun
-	 *   0: CIR_IRSTS_GH  - Min Length Detected
-	 */
-	status = nvt_cir_reg_read(nvt, CIR_IRSTS);
-	if (!status) {
-		nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
-		nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-		return IRQ_RETVAL(IRQ_NONE);
-	}
-
-	/* ack/clear all irq flags we've got */
-	nvt_cir_reg_write(nvt, status, CIR_IRSTS);
-	nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
-
-	/* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
-	iren = nvt_cir_reg_read(nvt, CIR_IREN);
-	if (!iren) {
-		nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
-		return IRQ_RETVAL(IRQ_NONE);
-	}
-
-	if (debug)
-		nvt_cir_log_irqs(status, iren);
-
-	if (status & CIR_IRSTS_RTR) {
-		/* FIXME: add code for study/learn mode */
-		/* We only do rx if not tx'ing */
-		if (nvt_cir_tx_inactive(nvt))
-			nvt_get_rx_ir_data(nvt);
-	}
-
-	if (status & CIR_IRSTS_PE) {
-		if (nvt_cir_tx_inactive(nvt))
-			nvt_get_rx_ir_data(nvt);
-
-		spin_lock_irqsave(&nvt->nvt_lock, flags);
-
-		cur_state = nvt->study_state;
-
-		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
-		if (cur_state == ST_STUDY_NONE)
-			nvt_clear_cir_fifo(nvt);
-	}
-
-	if (status & CIR_IRSTS_TE)
-		nvt_clear_tx_fifo(nvt);
-
-	if (status & CIR_IRSTS_TTR) {
-		unsigned int pos, count;
-		u8 tmp;
-
-		spin_lock_irqsave(&nvt->tx.lock, flags);
-
-		pos = nvt->tx.cur_buf_num;
-		count = nvt->tx.buf_count;
-
-		/* Write data into the hardware tx fifo while pos < count */
-		if (pos < count) {
-			nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
-			nvt->tx.cur_buf_num++;
-		/* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
-		} else {
-			tmp = nvt_cir_reg_read(nvt, CIR_IREN);
-			nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
-		}
-
-		spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
-	}
-
-	if (status & CIR_IRSTS_TFU) {
-		spin_lock_irqsave(&nvt->tx.lock, flags);
-		if (nvt->tx.tx_state == ST_TX_REPLY) {
-			nvt->tx.tx_state = ST_TX_REQUEST;
-			wake_up(&nvt->tx.queue);
-		}
-		spin_unlock_irqrestore(&nvt->tx.lock, flags);
-	}
-
-	nvt_dbg_verbose("%s done", __func__);
-	return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-/* Interrupt service routine for CIR Wake */
-static irqreturn_t nvt_cir_wake_isr(int irq, void *data)
-{
-	u8 status, iren, val;
-	struct nvt_dev *nvt = data;
-	unsigned long flags;
-
-	nvt_dbg_wake("%s firing", __func__);
-
-	status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
-	if (!status)
-		return IRQ_RETVAL(IRQ_NONE);
-
-	if (status & CIR_WAKE_IRSTS_IR_PENDING)
-		nvt_clear_cir_wake_fifo(nvt);
-
-	nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
-	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
-
-	/* Interrupt may be shared with CIR, bail if Wake not enabled */
-	iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
-	if (!iren) {
-		nvt_dbg_wake("%s exiting, wake not enabled", __func__);
-		return IRQ_RETVAL(IRQ_HANDLED);
-	}
-
-	if ((status & CIR_WAKE_IRSTS_PE) &&
-	    (nvt->wake_state == ST_WAKE_START)) {
-		while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
-			val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
-			nvt_dbg("setting wake up key: 0x%x", val);
-		}
-
-		nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
-		spin_lock_irqsave(&nvt->nvt_lock, flags);
-		nvt->wake_state = ST_WAKE_FINISH;
-		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-	}
-
-	nvt_dbg_wake("%s done", __func__);
-	return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-static void nvt_enable_cir(struct nvt_dev *nvt)
-{
-	/* set function enable flags */
-	nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
-			  CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
-			  CIR_IRCON);
-
-	nvt_efm_enable(nvt);
-
-	/* enable the CIR logical device */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_efm_disable(nvt);
-
-	/* clear all pending interrupts */
-	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
-	/* enable interrupts */
-	nvt_set_cir_iren(nvt);
-}
-
-static void nvt_disable_cir(struct nvt_dev *nvt)
-{
-	/* disable CIR interrupts */
-	nvt_cir_reg_write(nvt, 0, CIR_IREN);
-
-	/* clear any and all pending interrupts */
-	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
-	/* clear all function enable flags */
-	nvt_cir_reg_write(nvt, 0, CIR_IRCON);
-
-	/* clear hardware rx and tx fifos */
-	nvt_clear_cir_fifo(nvt);
-	nvt_clear_tx_fifo(nvt);
-
-	nvt_efm_enable(nvt);
-
-	/* disable the CIR logical device */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_efm_disable(nvt);
-}
-
-static int nvt_open(void *data)
-{
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = true;
-	nvt_enable_cir(nvt);
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
-	return 0;
-}
-
-static void nvt_close(void *data)
-{
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->in_use = false;
-	nvt_disable_cir(nvt);
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-}
-
-/* Allocate memory, probe hardware, and initialize everything */
-static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
-{
-	struct nvt_dev *nvt = NULL;
-	struct input_dev *rdev = NULL;
-	struct ir_dev_props *props = NULL;
-	int ret = -ENOMEM;
-
-	nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
-	if (!nvt)
-		return ret;
-
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props)
-		goto failure;
-
-	/* input device for IR remote (and tx) */
-	rdev = input_allocate_device();
-	if (!rdev)
-		goto failure;
-
-	ret = -ENODEV;
-	/* validate pnp resources */
-	if (!pnp_port_valid(pdev, 0) ||
-	    pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) {
-		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
-		goto failure;
-	}
-
-	if (!pnp_irq_valid(pdev, 0)) {
-		dev_err(&pdev->dev, "PNP IRQ not valid!\n");
-		goto failure;
-	}
-
-	if (!pnp_port_valid(pdev, 1) ||
-	    pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) {
-		dev_err(&pdev->dev, "Wake PNP Port not valid!\n");
-		goto failure;
-	}
-
-	nvt->cir_addr = pnp_port_start(pdev, 0);
-	nvt->cir_irq  = pnp_irq(pdev, 0);
-
-	nvt->cir_wake_addr = pnp_port_start(pdev, 1);
-	/* irq is always shared between cir and cir wake */
-	nvt->cir_wake_irq  = nvt->cir_irq;
-
-	nvt->cr_efir = CR_EFIR;
-	nvt->cr_efdr = CR_EFDR;
-
-	spin_lock_init(&nvt->nvt_lock);
-	spin_lock_init(&nvt->tx.lock);
-	init_ir_raw_event(&nvt->rawir);
-
-	ret = -EBUSY;
-	/* now claim resources */
-	if (!request_region(nvt->cir_addr,
-			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
-		goto failure;
-
-	if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED,
-			NVT_DRIVER_NAME, (void *)nvt))
-		goto failure;
-
-	if (!request_region(nvt->cir_wake_addr,
-			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
-		goto failure;
-
-	if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED,
-			NVT_DRIVER_NAME, (void *)nvt))
-		goto failure;
-
-	pnp_set_drvdata(pdev, nvt);
-	nvt->pdev = pdev;
-
-	init_waitqueue_head(&nvt->tx.queue);
-
-	ret = nvt_hw_detect(nvt);
-	if (ret)
-		goto failure;
-
-	/* Initialize CIR & CIR Wake Logical Devices */
-	nvt_efm_enable(nvt);
-	nvt_cir_ldev_init(nvt);
-	nvt_cir_wake_ldev_init(nvt);
-	nvt_efm_disable(nvt);
-
-	/* Initialize CIR & CIR Wake Config Registers */
-	nvt_cir_regs_init(nvt);
-	nvt_cir_wake_regs_init(nvt);
-
-	/* Set up ir-core props */
-	props->priv = nvt;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->open = nvt_open;
-	props->close = nvt_close;
-#if 0
-	props->min_timeout = XYZ;
-	props->max_timeout = XYZ;
-	props->timeout = XYZ;
-	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
-	props->rx_resolution = XYZ;
-
-	/* tx bits */
-	props->tx_resolution = XYZ;
-#endif
-	props->tx_ir = nvt_tx_ir;
-	props->s_tx_carrier = nvt_set_tx_carrier;
-
-	rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
-	rdev->id.bustype = BUS_HOST;
-	rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
-	rdev->id.product = nvt->chip_major;
-	rdev->id.version = nvt->chip_minor;
-
-	nvt->props = props;
-	nvt->rdev = rdev;
-
-	device_set_wakeup_capable(&pdev->dev, 1);
-	device_set_wakeup_enable(&pdev->dev, 1);
-
-	ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
-	if (ret)
-		goto failure;
-
-	nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
-	if (debug) {
-		cir_dump_regs(nvt);
-		cir_wake_dump_regs(nvt);
-	}
-
-	return 0;
-
-failure:
-	if (nvt->cir_irq)
-		free_irq(nvt->cir_irq, nvt);
-	if (nvt->cir_addr)
-		release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
-
-	if (nvt->cir_wake_irq)
-		free_irq(nvt->cir_wake_irq, nvt);
-	if (nvt->cir_wake_addr)
-		release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
-
-	input_free_device(rdev);
-	kfree(props);
-	kfree(nvt);
-
-	return ret;
-}
-
-static void __devexit nvt_remove(struct pnp_dev *pdev)
-{
-	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	/* disable CIR */
-	nvt_cir_reg_write(nvt, 0, CIR_IREN);
-	nvt_disable_cir(nvt);
-	/* enable CIR Wake (for IR power-on) */
-	nvt_enable_wake(nvt);
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
-	/* free resources */
-	free_irq(nvt->cir_irq, nvt);
-	free_irq(nvt->cir_wake_irq, nvt);
-	release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
-	release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
-
-	ir_input_unregister(nvt->rdev);
-
-	kfree(nvt->props);
-	kfree(nvt);
-}
-
-static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
-{
-	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
-	unsigned long flags;
-
-	nvt_dbg("%s called", __func__);
-
-	/* zero out misc state tracking */
-	spin_lock_irqsave(&nvt->nvt_lock, flags);
-	nvt->study_state = ST_STUDY_NONE;
-	nvt->wake_state = ST_WAKE_NONE;
-	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
-	spin_lock_irqsave(&nvt->tx.lock, flags);
-	nvt->tx.tx_state = ST_TX_NONE;
-	spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
-	/* disable all CIR interrupts */
-	nvt_cir_reg_write(nvt, 0, CIR_IREN);
-
-	nvt_efm_enable(nvt);
-
-	/* disable cir logical dev */
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_efm_disable(nvt);
-
-	/* make sure wake is enabled */
-	nvt_enable_wake(nvt);
-
-	return 0;
-}
-
-static int nvt_resume(struct pnp_dev *pdev)
-{
-	int ret = 0;
-	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
-
-	nvt_dbg("%s called", __func__);
-
-	/* open interrupt */
-	nvt_set_cir_iren(nvt);
-
-	/* Enable CIR logical device */
-	nvt_efm_enable(nvt);
-	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
-	nvt_efm_disable(nvt);
-
-	nvt_cir_regs_init(nvt);
-	nvt_cir_wake_regs_init(nvt);
-
-	return ret;
-}
-
-static void nvt_shutdown(struct pnp_dev *pdev)
-{
-	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
-	nvt_enable_wake(nvt);
-}
-
-static const struct pnp_device_id nvt_ids[] = {
-	{ "WEC0530", 0 },   /* CIR */
-	{ "NTN0530", 0 },   /* CIR for new chip's pnp id*/
-	{ "", 0 },
-};
-
-static struct pnp_driver nvt_driver = {
-	.name		= NVT_DRIVER_NAME,
-	.id_table	= nvt_ids,
-	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
-	.probe		= nvt_probe,
-	.remove		= __devexit_p(nvt_remove),
-	.suspend	= nvt_suspend,
-	.resume		= nvt_resume,
-	.shutdown	= nvt_shutdown,
-};
-
-int nvt_init(void)
-{
-	return pnp_register_driver(&nvt_driver);
-}
-
-void nvt_exit(void)
-{
-	pnp_unregister_driver(&nvt_driver);
-}
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging output");
-
-MODULE_DEVICE_TABLE(pnp, nvt_ids);
-MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
-
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_LICENSE("GPL");
-
-module_init(nvt_init);
-module_exit(nvt_exit);
diff --git a/drivers/media/IR/nuvoton-cir.h b/drivers/media/IR/nuvoton-cir.h
deleted file mode 100644
index 62dc53017c8e..000000000000
--- a/drivers/media/IR/nuvoton-cir.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
- *
- * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
- * Copyright (C) 2009 Nuvoton PS Team
- *
- * Special thanks to Nuvoton for providing hardware, spec sheets and
- * sample code upon which portions of this driver are based. Indirect
- * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
- * modeled after.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/spinlock.h>
-#include <linux/ioctl.h>
-
-/* platform driver name to register */
-#define NVT_DRIVER_NAME "nuvoton-cir"
-
-/* debugging module parameter */
-static int debug;
-
-
-#define nvt_pr(level, text, ...) \
-	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
-
-#define nvt_dbg(text, ...) \
-	if (debug) \
-		printk(KERN_DEBUG \
-			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-#define nvt_dbg_verbose(text, ...) \
-	if (debug > 1) \
-		printk(KERN_DEBUG \
-			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-#define nvt_dbg_wake(text, ...) \
-	if (debug > 2) \
-		printk(KERN_DEBUG \
-			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-
-/*
- * Original lirc driver said min value of 76, and recommended value of 256
- * for the buffer length, but then used 2048. Never mind that the size of the
- * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
- * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
- * and I don't have TX-capable hardware to test/debug on...
- */
-#define TX_BUF_LEN 256
-#define RX_BUF_LEN 32
-
-struct nvt_dev {
-	struct pnp_dev *pdev;
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
-	struct ir_raw_event rawir;
-
-	spinlock_t nvt_lock;
-	bool in_use;
-
-	/* for rx */
-	u8 buf[RX_BUF_LEN];
-	unsigned int pkts;
-
-	struct {
-		spinlock_t lock;
-		u8 buf[TX_BUF_LEN];
-		unsigned int buf_count;
-		unsigned int cur_buf_num;
-		wait_queue_head_t queue;
-		u8 tx_state;
-	} tx;
-
-	/* EFER Config register index/data pair */
-	u8 cr_efir;
-	u8 cr_efdr;
-
-	/* hardware I/O settings */
-	unsigned long cir_addr;
-	unsigned long cir_wake_addr;
-	int cir_irq;
-	int cir_wake_irq;
-
-	/* hardware id */
-	u8 chip_major;
-	u8 chip_minor;
-
-	/* hardware features */
-	bool hw_learning_capable;
-	bool hw_tx_capable;
-
-	/* rx settings */
-	bool learning_enabled;
-	bool carrier_detect_enabled;
-
-	/* track cir wake state */
-	u8 wake_state;
-	/* for study */
-	u8 study_state;
-	/* carrier period = 1 / frequency */
-	u32 carrier;
-};
-
-/* study states */
-#define ST_STUDY_NONE      0x0
-#define ST_STUDY_START     0x1
-#define ST_STUDY_CARRIER   0x2
-#define ST_STUDY_ALL_RECV  0x4
-
-/* wake states */
-#define ST_WAKE_NONE	0x0
-#define ST_WAKE_START	0x1
-#define ST_WAKE_FINISH	0x2
-
-/* receive states */
-#define ST_RX_WAIT_7F		0x1
-#define ST_RX_WAIT_HEAD		0x2
-#define ST_RX_WAIT_SILENT_END	0x4
-
-/* send states */
-#define ST_TX_NONE	0x0
-#define ST_TX_REQUEST	0x2
-#define ST_TX_REPLY	0x4
-
-/* buffer packet constants */
-#define BUF_PULSE_BIT	0x80
-#define BUF_LEN_MASK	0x7f
-#define BUF_REPEAT_BYTE	0x70
-#define BUF_REPEAT_MASK	0xf0
-
-/* CIR settings */
-
-/* total length of CIR and CIR WAKE */
-#define CIR_IOREG_LENGTH	0x0f
-
-/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
-#define CIR_RX_LIMIT_COUNT	0x7d0
-
-/* CIR Regs */
-#define CIR_IRCON	0x00
-#define CIR_IRSTS	0x01
-#define CIR_IREN	0x02
-#define CIR_RXFCONT	0x03
-#define CIR_CP		0x04
-#define CIR_CC		0x05
-#define CIR_SLCH	0x06
-#define CIR_SLCL	0x07
-#define CIR_FIFOCON	0x08
-#define CIR_IRFIFOSTS	0x09
-#define CIR_SRXFIFO	0x0a
-#define CIR_TXFCONT	0x0b
-#define CIR_STXFIFO	0x0c
-#define CIR_FCCH	0x0d
-#define CIR_FCCL	0x0e
-#define CIR_IRFSM	0x0f
-
-/* CIR IRCON settings */
-#define CIR_IRCON_RECV	 0x80
-#define CIR_IRCON_WIREN	 0x40
-#define CIR_IRCON_TXEN	 0x20
-#define CIR_IRCON_RXEN	 0x10
-#define CIR_IRCON_WRXINV 0x08
-#define CIR_IRCON_RXINV	 0x04
-
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_1	0x00
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_25	0x01
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_50	0x02
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_100	0x03
-
-/* FIXME: make this a runtime option */
-/* select sample period as 50us */
-#define CIR_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
-
-/* CIR IRSTS settings */
-#define CIR_IRSTS_RDR	0x80
-#define CIR_IRSTS_RTR	0x40
-#define CIR_IRSTS_PE	0x20
-#define CIR_IRSTS_RFO	0x10
-#define CIR_IRSTS_TE	0x08
-#define CIR_IRSTS_TTR	0x04
-#define CIR_IRSTS_TFU	0x02
-#define CIR_IRSTS_GH	0x01
-
-/* CIR IREN settings */
-#define CIR_IREN_RDR	0x80
-#define CIR_IREN_RTR	0x40
-#define CIR_IREN_PE	0x20
-#define CIR_IREN_RFO	0x10
-#define CIR_IREN_TE	0x08
-#define CIR_IREN_TTR	0x04
-#define CIR_IREN_TFU	0x02
-#define CIR_IREN_GH	0x01
-
-/* CIR FIFOCON settings */
-#define CIR_FIFOCON_TXFIFOCLR		0x80
-
-#define CIR_FIFOCON_TX_TRIGGER_LEV_31	0x00
-#define CIR_FIFOCON_TX_TRIGGER_LEV_24	0x10
-#define CIR_FIFOCON_TX_TRIGGER_LEV_16	0x20
-#define CIR_FIFOCON_TX_TRIGGER_LEV_8	0x30
-
-/* FIXME: make this a runtime option */
-/* select TX trigger level as 16 */
-#define CIR_FIFOCON_TX_TRIGGER_LEV	CIR_FIFOCON_TX_TRIGGER_LEV_16
-
-#define CIR_FIFOCON_RXFIFOCLR		0x08
-
-#define CIR_FIFOCON_RX_TRIGGER_LEV_1	0x00
-#define CIR_FIFOCON_RX_TRIGGER_LEV_8	0x01
-#define CIR_FIFOCON_RX_TRIGGER_LEV_16	0x02
-#define CIR_FIFOCON_RX_TRIGGER_LEV_24	0x03
-
-/* FIXME: make this a runtime option */
-/* select RX trigger level as 24 */
-#define CIR_FIFOCON_RX_TRIGGER_LEV	CIR_FIFOCON_RX_TRIGGER_LEV_24
-
-/* CIR IRFIFOSTS settings */
-#define CIR_IRFIFOSTS_IR_PENDING	0x80
-#define CIR_IRFIFOSTS_RX_GS		0x40
-#define CIR_IRFIFOSTS_RX_FTA		0x20
-#define CIR_IRFIFOSTS_RX_EMPTY		0x10
-#define CIR_IRFIFOSTS_RX_FULL		0x08
-#define CIR_IRFIFOSTS_TX_FTA		0x04
-#define CIR_IRFIFOSTS_TX_EMPTY		0x02
-#define CIR_IRFIFOSTS_TX_FULL		0x01
-
-
-/* CIR WAKE UP Regs */
-#define CIR_WAKE_IRCON			0x00
-#define CIR_WAKE_IRSTS			0x01
-#define CIR_WAKE_IREN			0x02
-#define CIR_WAKE_FIFO_CMP_DEEP		0x03
-#define CIR_WAKE_FIFO_CMP_TOL		0x04
-#define CIR_WAKE_FIFO_COUNT		0x05
-#define CIR_WAKE_SLCH			0x06
-#define CIR_WAKE_SLCL			0x07
-#define CIR_WAKE_FIFOCON		0x08
-#define CIR_WAKE_SRXFSTS		0x09
-#define CIR_WAKE_SAMPLE_RX_FIFO		0x0a
-#define CIR_WAKE_WR_FIFO_DATA		0x0b
-#define CIR_WAKE_RD_FIFO_ONLY		0x0c
-#define CIR_WAKE_RD_FIFO_ONLY_IDX	0x0d
-#define CIR_WAKE_FIFO_IGNORE		0x0e
-#define CIR_WAKE_IRFSM			0x0f
-
-/* CIR WAKE UP IRCON settings */
-#define CIR_WAKE_IRCON_DEC_RST		0x80
-#define CIR_WAKE_IRCON_MODE1		0x40
-#define CIR_WAKE_IRCON_MODE0		0x20
-#define CIR_WAKE_IRCON_RXEN		0x10
-#define CIR_WAKE_IRCON_R		0x08
-#define CIR_WAKE_IRCON_RXINV		0x04
-
-/* FIXME/jarod: make this a runtime option */
-/* select a same sample period like cir register */
-#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
-
-/* CIR WAKE IRSTS Bits */
-#define CIR_WAKE_IRSTS_RDR		0x80
-#define CIR_WAKE_IRSTS_RTR		0x40
-#define CIR_WAKE_IRSTS_PE		0x20
-#define CIR_WAKE_IRSTS_RFO		0x10
-#define CIR_WAKE_IRSTS_GH		0x08
-#define CIR_WAKE_IRSTS_IR_PENDING	0x01
-
-/* CIR WAKE UP IREN Bits */
-#define CIR_WAKE_IREN_RDR		0x80
-#define CIR_WAKE_IREN_RTR		0x40
-#define CIR_WAKE_IREN_PE		0x20
-#define CIR_WAKE_IREN_RFO		0x10
-#define CIR_WAKE_IREN_TE		0x08
-#define CIR_WAKE_IREN_TTR		0x04
-#define CIR_WAKE_IREN_TFU		0x02
-#define CIR_WAKE_IREN_GH		0x01
-
-/* CIR WAKE FIFOCON settings */
-#define CIR_WAKE_FIFOCON_RXFIFOCLR	0x08
-
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67	0x00
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66	0x01
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65	0x02
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64	0x03
-
-/* FIXME: make this a runtime option */
-/* select WAKE UP RX trigger level as 67 */
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV	CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
-
-/* CIR WAKE SRXFSTS settings */
-#define CIR_WAKE_IRFIFOSTS_RX_GS	0x80
-#define CIR_WAKE_IRFIFOSTS_RX_FTA	0x40
-#define CIR_WAKE_IRFIFOSTS_RX_EMPTY	0x20
-#define CIR_WAKE_IRFIFOSTS_RX_FULL	0x10
-
-/* CIR Wake FIFO buffer is 67 bytes long */
-#define CIR_WAKE_FIFO_LEN		67
-/* CIR Wake byte comparison tolerance */
-#define CIR_WAKE_CMP_TOLERANCE		5
-
-/*
- * Extended Function Enable Registers:
- *  Extended Function Index Register
- *  Extended Function Data Register
- */
-#define CR_EFIR			0x2e
-#define CR_EFDR			0x2f
-
-/* Possible alternate EFER values, depends on how the chip is wired */
-#define CR_EFIR2		0x4e
-#define CR_EFDR2		0x4f
-
-/* Extended Function Mode enable/disable magic values */
-#define EFER_EFM_ENABLE		0x87
-#define EFER_EFM_DISABLE	0xaa
-
-/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
-#define CHIP_ID_HIGH		0xb4
-#define CHIP_ID_LOW		0x72
-#define CHIP_ID_LOW2		0x73
-
-/* Config regs we need to care about */
-#define CR_SOFTWARE_RESET	0x02
-#define CR_LOGICAL_DEV_SEL	0x07
-#define CR_CHIP_ID_HI		0x20
-#define CR_CHIP_ID_LO		0x21
-#define CR_DEV_POWER_DOWN	0x22 /* bit 2 is CIR power, default power on */
-#define CR_OUTPUT_PIN_SEL	0x27
-#define CR_LOGICAL_DEV_EN	0x30 /* valid for all logical devices */
-/* next three regs valid for both the CIR and CIR_WAKE logical devices */
-#define CR_CIR_BASE_ADDR_HI	0x60
-#define CR_CIR_BASE_ADDR_LO	0x61
-#define CR_CIR_IRQ_RSRC		0x70
-/* next three regs valid only for ACPI logical dev */
-#define CR_ACPI_CIR_WAKE	0xe0
-#define CR_ACPI_IRQ_EVENTS	0xf6
-#define CR_ACPI_IRQ_EVENTS2	0xf7
-
-/* Logical devices that we need to care about */
-#define LOGICAL_DEV_LPT		0x01
-#define LOGICAL_DEV_CIR		0x06
-#define LOGICAL_DEV_ACPI	0x0a
-#define LOGICAL_DEV_CIR_WAKE	0x0e
-
-#define LOGICAL_DEV_DISABLE	0x00
-#define LOGICAL_DEV_ENABLE	0x01
-
-#define CIR_WAKE_ENABLE_BIT	0x08
-#define CIR_INTR_MOUSE_IRQ_BIT	0x80
-#define PME_INTR_CIR_PASS_BIT	0x08
-
-#define OUTPUT_PIN_SEL_MASK	0xbc
-#define OUTPUT_ENABLE_CIR	0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
-#define OUTPUT_ENABLE_CIRWB	0x40 /* enable wide-band sensor */
-
-/* MCE CIR signal length, related on sample period */
-
-/* MCE CIR controller signal length: about 43ms
- * 43ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define CONTROLLER_BUF_LEN_MIN 830
-
-/* MCE CIR keyboard signal length: about 26ms
- * 26ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define KEYBOARD_BUF_LEN_MAX 650
-#define KEYBOARD_BUF_LEN_MIN 610
-
-/* MCE CIR mouse signal length: about 24ms
- * 24ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define MOUSE_BUF_LEN_MIN 565
-
-#define CIR_SAMPLE_PERIOD 50
-#define CIR_SAMPLE_LOW_INACCURACY 0.85
-
-/* MAX silence time that driver will sent to lirc */
-#define MAX_SILENCE_TIME 60000
-
-#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
-#define SAMPLE_PERIOD 100
-
-#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
-#define SAMPLE_PERIOD 50
-
-#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
-#define SAMPLE_PERIOD 25
-
-#else
-#define SAMPLE_PERIOD 1
-#endif
-
-/* as VISTA MCE definition, valid carrier value */
-#define MAX_CARRIER 60000
-#define MIN_CARRIER 30000
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
deleted file mode 100644
index 689143f2fff0..000000000000
--- a/drivers/media/IR/rc-map.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <media/ir-core.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-/* Used to handle IR raw handler extensions */
-static LIST_HEAD(rc_map_list);
-static DEFINE_SPINLOCK(rc_map_lock);
-
-static struct rc_keymap *seek_rc_map(const char *name)
-{
-	struct rc_keymap *map = NULL;
-
-	spin_lock(&rc_map_lock);
-	list_for_each_entry(map, &rc_map_list, list) {
-		if (!strcmp(name, map->map.name)) {
-			spin_unlock(&rc_map_lock);
-			return map;
-		}
-	}
-	spin_unlock(&rc_map_lock);
-
-	return NULL;
-}
-
-struct ir_scancode_table *get_rc_map(const char *name)
-{
-
-	struct rc_keymap *map;
-
-	map = seek_rc_map(name);
-#ifdef MODULE
-	if (!map) {
-		int rc = request_module(name);
-		if (rc < 0) {
-			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
-			return NULL;
-		}
-		msleep(20);	/* Give some time for IR to register */
-
-		map = seek_rc_map(name);
-	}
-#endif
-	if (!map) {
-		printk(KERN_ERR "IR keymap %s not found\n", name);
-		return NULL;
-	}
-
-	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
-
-	return &map->map;
-}
-EXPORT_SYMBOL_GPL(get_rc_map);
-
-int ir_register_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_add_tail(&map->list, &rc_map_list);
-	spin_unlock(&rc_map_lock);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_register_map);
-
-void ir_unregister_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_del(&map->list);
-	spin_unlock(&rc_map_lock);
-}
-EXPORT_SYMBOL_GPL(ir_unregister_map);
-
-
-static struct ir_scancode empty[] = {
-	{ 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
-	.map = {
-		.scan    = empty,
-		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EMPTY,
-	}
-};
-
-int ir_rcmap_init(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
-	ir_unregister_map(&empty_map);
-}
diff --git a/drivers/media/IR/streamzap.c b/drivers/media/IR/streamzap.c
deleted file mode 100644
index 3a20aef67d08..000000000000
--- a/drivers/media/IR/streamzap.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Streamzap Remote Control driver
- *
- * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
- * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
- *
- * This driver was based on the work of Greg Wickham and Adrian
- * Dewhurst. It was substantially rewritten to support correct signal
- * gaps and now maintains a delay buffer, which is used to present
- * consistent timing behaviour to user space applications. Without the
- * delay buffer an ugly hack would be required in lircd, which can
- * cause sluggish signal decoding in certain situations.
- *
- * Ported to in-kernel ir-core interface by Jarod Wilson
- *
- * This driver is based on the USB skeleton driver packaged with the
- * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#define DRIVER_VERSION	"1.61"
-#define DRIVER_NAME	"streamzap"
-#define DRIVER_DESC	"Streamzap Remote Control driver"
-
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-#define USB_STREAMZAP_VENDOR_ID		0x0e9c
-#define USB_STREAMZAP_PRODUCT_ID	0x0000
-
-/* table of devices that work with this driver */
-static struct usb_device_id streamzap_table[] = {
-	/* Streamzap Remote Control */
-	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, streamzap_table);
-
-#define SZ_PULSE_MASK 0xf0
-#define SZ_SPACE_MASK 0x0f
-#define SZ_TIMEOUT    0xff
-#define SZ_RESOLUTION 256
-
-/* number of samples buffered */
-#define SZ_BUF_LEN 128
-
-/* from ir-rc5-sz-decoder.c */
-#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
-#define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
-#else
-#define load_rc5_sz_decode()    0
-#endif
-
-enum StreamzapDecoderState {
-	PulseSpace,
-	FullPulse,
-	FullSpace,
-	IgnorePulse
-};
-
-/* structure to hold our device specific stuff */
-struct streamzap_ir {
-
-	/* ir-core */
-	struct ir_dev_props *props;
-
-	/* core device info */
-	struct device *dev;
-	struct input_dev *idev;
-
-	/* usb */
-	struct usb_device	*usbdev;
-	struct usb_interface	*interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct urb		*urb_in;
-
-	/* buffer & dma */
-	unsigned char		*buf_in;
-	dma_addr_t		dma_in;
-	unsigned int		buf_in_len;
-
-	/* track what state we're in */
-	enum StreamzapDecoderState decoder_state;
-	/* tracks whether we are currently receiving some signal */
-	bool			idle;
-	/* sum of signal lengths received since signal start */
-	unsigned long		sum;
-	/* start time of signal; necessary for gap tracking */
-	struct timeval		signal_last;
-	struct timeval		signal_start;
-	bool			timeout_enabled;
-
-	char			name[128];
-	char			phys[64];
-};
-
-
-/* local function prototypes */
-static int streamzap_probe(struct usb_interface *interface,
-			   const struct usb_device_id *id);
-static void streamzap_disconnect(struct usb_interface *interface);
-static void streamzap_callback(struct urb *urb);
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
-static int streamzap_resume(struct usb_interface *intf);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver streamzap_driver = {
-	.name =		DRIVER_NAME,
-	.probe =	streamzap_probe,
-	.disconnect =	streamzap_disconnect,
-	.suspend =	streamzap_suspend,
-	.resume =	streamzap_resume,
-	.id_table =	streamzap_table,
-};
-
-static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
-{
-	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
-		(rawir.pulse ? "pulse" : "space"), rawir.duration);
-	ir_raw_event_store_with_filter(sz->idev, &rawir);
-}
-
-static void sz_push_full_pulse(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	DEFINE_IR_RAW_EVENT(rawir);
-
-	if (sz->idle) {
-		long deltv;
-
-		sz->signal_last = sz->signal_start;
-		do_gettimeofday(&sz->signal_start);
-
-		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
-		rawir.pulse = false;
-		if (deltv > 15) {
-			/* really long time */
-			rawir.duration = IR_MAX_DURATION;
-		} else {
-			rawir.duration = (int)(deltv * 1000000 +
-				sz->signal_start.tv_usec -
-				sz->signal_last.tv_usec);
-			rawir.duration -= sz->sum;
-			rawir.duration *= 1000;
-			rawir.duration &= IR_MAX_DURATION;
-		}
-		sz_push(sz, rawir);
-
-		sz->idle = false;
-		sz->sum = 0;
-	}
-
-	rawir.pulse = true;
-	rawir.duration = ((int) value) * SZ_RESOLUTION;
-	rawir.duration += SZ_RESOLUTION / 2;
-	sz->sum += rawir.duration;
-	rawir.duration *= 1000;
-	rawir.duration &= IR_MAX_DURATION;
-	sz_push(sz, rawir);
-}
-
-static void sz_push_half_pulse(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
-}
-
-static void sz_push_full_space(struct streamzap_ir *sz,
-			       unsigned char value)
-{
-	DEFINE_IR_RAW_EVENT(rawir);
-
-	rawir.pulse = false;
-	rawir.duration = ((int) value) * SZ_RESOLUTION;
-	rawir.duration += SZ_RESOLUTION / 2;
-	sz->sum += rawir.duration;
-	rawir.duration *= 1000;
-	sz_push(sz, rawir);
-}
-
-static void sz_push_half_space(struct streamzap_ir *sz,
-			       unsigned long value)
-{
-	sz_push_full_space(sz, value & SZ_SPACE_MASK);
-}
-
-/**
- * streamzap_callback - usb IRQ handler callback
- *
- * This procedure is invoked on reception of data from
- * the usb remote.
- */
-static void streamzap_callback(struct urb *urb)
-{
-	struct streamzap_ir *sz;
-	unsigned int i;
-	int len;
-
-	if (!urb)
-		return;
-
-	sz = urb->context;
-	len = urb->actual_length;
-
-	switch (urb->status) {
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/*
-		 * this urb is terminated, clean up.
-		 * sz might already be invalid at this point
-		 */
-		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
-		return;
-	default:
-		break;
-	}
-
-	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
-	for (i = 0; i < len; i++) {
-		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
-			i, (unsigned char)sz->buf_in[i]);
-		switch (sz->decoder_state) {
-		case PulseSpace:
-			if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
-				SZ_PULSE_MASK) {
-				sz->decoder_state = FullPulse;
-				continue;
-			} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
-					== SZ_SPACE_MASK) {
-				sz_push_half_pulse(sz, sz->buf_in[i]);
-				sz->decoder_state = FullSpace;
-				continue;
-			} else {
-				sz_push_half_pulse(sz, sz->buf_in[i]);
-				sz_push_half_space(sz, sz->buf_in[i]);
-			}
-			break;
-		case FullPulse:
-			sz_push_full_pulse(sz, sz->buf_in[i]);
-			sz->decoder_state = IgnorePulse;
-			break;
-		case FullSpace:
-			if (sz->buf_in[i] == SZ_TIMEOUT) {
-				DEFINE_IR_RAW_EVENT(rawir);
-
-				rawir.pulse = false;
-				rawir.duration = sz->props->timeout;
-				sz->idle = true;
-				if (sz->timeout_enabled)
-					sz_push(sz, rawir);
-				ir_raw_event_handle(sz->idev);
-			} else {
-				sz_push_full_space(sz, sz->buf_in[i]);
-			}
-			sz->decoder_state = PulseSpace;
-			break;
-		case IgnorePulse:
-			if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
-				SZ_SPACE_MASK) {
-				sz->decoder_state = FullSpace;
-				continue;
-			}
-			sz_push_half_space(sz, sz->buf_in[i]);
-			sz->decoder_state = PulseSpace;
-			break;
-		}
-	}
-
-	usb_submit_urb(urb, GFP_ATOMIC);
-
-	return;
-}
-
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
-{
-	struct input_dev *idev;
-	struct ir_dev_props *props;
-	struct device *dev = sz->dev;
-	int ret;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
-
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
-	}
-
-	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
-		 "Receiver (%04x:%04x)",
-		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
-		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
-	idev->name = sz->name;
-	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
-	strlcat(sz->phys, "/input0", sizeof(sz->phys));
-	idev->phys = sz->phys;
-
-	props->priv = sz;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-
-	sz->props = props;
-
-	usb_to_input_id(sz->usbdev, &idev->id);
-	idev->dev.parent = sz->dev;
-
-	ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
-	if (ret < 0) {
-		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
-	}
-
-	return idev;
-
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
-	return NULL;
-}
-
-/**
- *	streamzap_probe
- *
- *	Called by usb-core to associated with a candidate device
- *	On any failure the return value is the ERROR
- *	On success return 0
- */
-static int __devinit streamzap_probe(struct usb_interface *intf,
-				     const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	struct usb_host_interface *iface_host;
-	struct streamzap_ir *sz = NULL;
-	char buf[63], name[128] = "";
-	int retval = -ENOMEM;
-	int pipe, maxp;
-
-	/* Allocate space for device driver specific data */
-	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
-	if (!sz)
-		return -ENOMEM;
-
-	sz->usbdev = usbdev;
-	sz->interface = intf;
-
-	/* Check to ensure endpoint information matches requirements */
-	iface_host = intf->cur_altsetting;
-
-	if (iface_host->desc.bNumEndpoints != 1) {
-		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
-			__func__, iface_host->desc.bNumEndpoints);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	sz->endpoint = &(iface_host->endpoint[0].desc);
-	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-	    != USB_DIR_IN) {
-		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
-			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-	    != USB_ENDPOINT_XFER_INT) {
-		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
-			"02%02x\n", __func__, sz->endpoint->bmAttributes);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
-
-	if (maxp == 0) {
-		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
-			__func__);
-		retval = -ENODEV;
-		goto free_sz;
-	}
-
-	/* Allocate the USB buffer and IRQ URB */
-	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
-	if (!sz->buf_in)
-		goto free_sz;
-
-	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!sz->urb_in)
-		goto free_buf_in;
-
-	sz->dev = &intf->dev;
-	sz->buf_in_len = maxp;
-
-	if (usbdev->descriptor.iManufacturer
-	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
-			  buf, sizeof(buf)) > 0)
-		strlcpy(name, buf, sizeof(name));
-
-	if (usbdev->descriptor.iProduct
-	    && usb_string(usbdev, usbdev->descriptor.iProduct,
-			  buf, sizeof(buf)) > 0)
-		snprintf(name + strlen(name), sizeof(name) - strlen(name),
-			 " %s", buf);
-
-	sz->idev = streamzap_init_input_dev(sz);
-	if (!sz->idev)
-		goto input_dev_fail;
-
-	sz->idle = true;
-	sz->decoder_state = PulseSpace;
-	/* FIXME: don't yet have a way to set this */
-	sz->timeout_enabled = true;
-	sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
-				IR_MAX_DURATION) | 0x03000000);
-	#if 0
-	/* not yet supported, depends on patches from maxim */
-	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
-	sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
-	sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
-	#endif
-
-	do_gettimeofday(&sz->signal_start);
-
-	/* Complete final initialisations */
-	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
-			 maxp, (usb_complete_t)streamzap_callback,
-			 sz, sz->endpoint->bInterval);
-	sz->urb_in->transfer_dma = sz->dma_in;
-	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	usb_set_intfdata(intf, sz);
-
-	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
-		dev_err(sz->dev, "urb submit failed\n");
-
-	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
-		 usbdev->bus->busnum, usbdev->devnum);
-
-	/* Load the streamzap not-quite-rc5 decoder too */
-	load_rc5_sz_decode();
-
-	return 0;
-
-input_dev_fail:
-	usb_free_urb(sz->urb_in);
-free_buf_in:
-	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
-free_sz:
-	kfree(sz);
-
-	return retval;
-}
-
-/**
- * streamzap_disconnect
- *
- * Called by the usb core when the device is removed from the system.
- *
- * This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->usbdev.  It is also supposed to terminate any currently
- * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
- * does not provide any way to do this.
- */
-static void streamzap_disconnect(struct usb_interface *interface)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(interface);
-	struct usb_device *usbdev = interface_to_usbdev(interface);
-
-	usb_set_intfdata(interface, NULL);
-
-	if (!sz)
-		return;
-
-	sz->usbdev = NULL;
-	ir_input_unregister(sz->idev);
-	usb_kill_urb(sz->urb_in);
-	usb_free_urb(sz->urb_in);
-	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
-	kfree(sz);
-}
-
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(intf);
-
-	usb_kill_urb(sz->urb_in);
-
-	return 0;
-}
-
-static int streamzap_resume(struct usb_interface *intf)
-{
-	struct streamzap_ir *sz = usb_get_intfdata(intf);
-
-	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
-		dev_err(sz->dev, "Error sumbiting urb\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- *	streamzap_init
- */
-static int __init streamzap_init(void)
-{
-	int ret;
-
-	/* register this driver with the USB subsystem */
-	ret = usb_register(&streamzap_driver);
-	if (ret < 0)
-		printk(KERN_ERR DRIVER_NAME ": usb register failed, "
-		       "result = %d\n", ret);
-
-	return ret;
-}
-
-/**
- *	streamzap_exit
- */
-static void __exit streamzap_exit(void)
-{
-	usb_deregister(&streamzap_driver);
-}
-
-
-module_init(streamzap_init);
-module_exit(streamzap_exit);
-
-MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index a28541b2b1a2..c21dfc28482e 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -99,7 +99,7 @@ config VIDEO_MEDIA
 comment "Multimedia drivers"
 
 source "drivers/media/common/Kconfig"
-source "drivers/media/IR/Kconfig"
+source "drivers/media/rc/Kconfig"
 
 #
 # Tuner drivers for DVB and V4L
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 499b0810d019..b603ea645ede 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y += common/ IR/ video/
+obj-y += common/ rc/ video/
 
 obj-$(CONFIG_VIDEO_DEV) += radio/
 obj-$(CONFIG_DVB_CORE)  += dvb/
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
new file mode 100644
index 000000000000..d05003d0995f
--- /dev/null
+++ b/drivers/media/rc/Kconfig
@@ -0,0 +1,167 @@
+menuconfig IR_CORE
+	tristate "Infrared remote controller adapters"
+	depends on INPUT
+	default INPUT
+	---help---
+	  Enable support for Remote Controllers on Linux. This is
+	  needed in order to support several video capture adapters.
+
+	  Enable this option if you have a video capture board even
+	  if you don't need IR, as otherwise, you may not be able to
+	  compile the driver for your adapter.
+
+config IR_LEGACY
+	tristate
+	depends on IR_CORE
+	default IR_CORE
+
+if IR_CORE
+
+config LIRC
+	tristate
+	default y
+
+	---help---
+	   Enable this option to build the Linux Infrared Remote
+	   Control (LIRC) core device interface driver. The LIRC
+	   interface passes raw IR to and from userspace, where the
+	   LIRC daemon handles protocol decoding for IR reception and
+	   encoding for IR transmitting (aka "blasting").
+
+source "drivers/media/rc/keymaps/Kconfig"
+
+config IR_NEC_DECODER
+	tristate "Enable IR raw decoder for the NEC protocol"
+	depends on IR_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have IR with NEC protocol, and
+	   if the IR is decoded in software
+
+config IR_RC5_DECODER
+	tristate "Enable IR raw decoder for the RC-5 protocol"
+	depends on IR_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have IR with RC-5 protocol, and
+	   if the IR is decoded in software
+
+config IR_RC6_DECODER
+	tristate "Enable IR raw decoder for the RC6 protocol"
+	depends on IR_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have an infrared remote control which
+	   uses the RC6 protocol, and you need software decoding support.
+
+config IR_JVC_DECODER
+	tristate "Enable IR raw decoder for the JVC protocol"
+	depends on IR_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have an infrared remote control which
+	   uses the JVC protocol, and you need software decoding support.
+
+config IR_SONY_DECODER
+	tristate "Enable IR raw decoder for the Sony protocol"
+	depends on IR_CORE
+	default y
+
+	---help---
+	   Enable this option if you have an infrared remote control which
+	   uses the Sony protocol, and you need software decoding support.
+
+config IR_RC5_SZ_DECODER
+	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
+	depends on IR_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have IR with RC-5 (streamzap) protocol,
+	   and if the IR is decoded in software. (The Streamzap PC Remote
+	   uses an IR protocol that is almost standard RC-5, but not quite,
+	   as it uses an additional bit).
+
+config IR_LIRC_CODEC
+	tristate "Enable IR to LIRC bridge"
+	depends on IR_CORE
+	depends on LIRC
+	default y
+
+	---help---
+	   Enable this option to pass raw IR to and from userspace via
+	   the LIRC interface.
+
+config IR_ENE
+	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transceiver made by ENE.
+
+	   You can see if you have it by looking at lspnp output.
+	   Output should include ENE0100 ENE0200 or something similar.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called ene_ir.
+
+config IR_IMON
+	tristate "SoundGraph iMON Receiver and Display"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+	   IR Receiver and/or LCD/VFD/VGA display.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called imon.
+
+config IR_MCEUSB
+	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a Windows Media Center Edition
+	   eHome Infrared Transceiver.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called mceusb.
+
+config IR_NUVOTON
+	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+	depends on PNP
+	depends on IR_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by Nuvoton (formerly Winbond). This chip is
+	   found in the ASRock ION 330HT, as well as assorted Intel
+	   DP55-series motherboards (and of course, possibly others).
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called nuvoton-cir.
+
+config IR_STREAMZAP
+	tristate "Streamzap PC Remote IR Receiver"
+	depends on USB_ARCH_HAS_HCD
+	depends on IR_CORE
+	select USB
+	---help---
+	   Say Y here if you want to use a Streamzap PC Remote
+	   Infrared Receiver.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called streamzap.
+
+endif #IR_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
new file mode 100644
index 000000000000..38873cff3429
--- /dev/null
+++ b/drivers/media/rc/Makefile
@@ -0,0 +1,22 @@
+ir-common-objs  := ir-functions.o
+ir-core-objs	:= ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
+
+obj-y += keymaps/
+
+obj-$(CONFIG_IR_CORE) += ir-core.o
+obj-$(CONFIG_IR_LEGACY) += ir-common.o
+obj-$(CONFIG_LIRC) += lirc_dev.o
+obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
+obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
+obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
+obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
+obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
+obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
+obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
+
+# stand-alone IR receivers/transmitters
+obj-$(CONFIG_IR_IMON) += imon.o
+obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
new file mode 100644
index 000000000000..7637babcd262
--- /dev/null
+++ b/drivers/media/rc/ene_ir.c
@@ -0,0 +1,1217 @@
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * Special thanks to:
+ *   Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore
+ *    bringing to life support for transmission & learning mode.
+ *
+ *   Charlie Andrews <charliethepilot@googlemail.com> for lots of help in
+ *   bringing up the support of new firmware buffer that is popular
+ *   on latest notebooks
+ *
+ *   ENE for partial device documentation
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
+
+static int sample_period;
+static bool learning_mode_force;
+static int debug;
+static bool txsim;
+
+static void ene_set_reg_addr(struct ene_device *dev, u16 reg)
+{
+	outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+	outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+}
+
+/* read a hardware register */
+static u8 ene_read_reg(struct ene_device *dev, u16 reg)
+{
+	u8 retval;
+	ene_set_reg_addr(dev, reg);
+	retval = inb(dev->hw_io + ENE_IO);
+	dbg_regs("reg %04x == %02x", reg, retval);
+	return retval;
+}
+
+/* write a hardware register */
+static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+	dbg_regs("reg %04x <- %02x", reg, value);
+	ene_set_reg_addr(dev, reg);
+	outb(value, dev->hw_io + ENE_IO);
+}
+
+/* Set bits in hardware register */
+static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
+{
+	dbg_regs("reg %04x |= %02x", reg, mask);
+	ene_set_reg_addr(dev, reg);
+	outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);
+}
+
+/* Clear bits in hardware register */
+static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
+{
+	dbg_regs("reg %04x &= ~%02x ", reg, mask);
+	ene_set_reg_addr(dev, reg);
+	outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);
+}
+
+/* A helper to set/clear a bit in register according to boolean variable */
+static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,
+								bool set)
+{
+	if (set)
+		ene_set_reg_mask(dev, reg, mask);
+	else
+		ene_clear_reg_mask(dev, reg, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+	u8 chip_major, chip_minor;
+	u8 hw_revision, old_ver;
+	u8 fw_reg2, fw_reg1;
+
+	ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
+	chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);
+	chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);
+	ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
+
+	hw_revision = ene_read_reg(dev, ENE_ECHV);
+	old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);
+
+	dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +
+		(ene_read_reg(dev, ENE_PLLFRL) >> 4);
+
+	if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)
+		dev->rx_period_adjust =
+			dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
+
+	if (hw_revision == 0xFF) {
+		ene_warn("device seems to be disabled");
+		ene_warn("send a mail to lirc-list@lists.sourceforge.net");
+		ene_warn("please attach output of acpidump and dmidecode");
+		return -ENODEV;
+	}
+
+	ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
+		chip_major, chip_minor, old_ver, hw_revision);
+
+	ene_notice("PLL freq = %d", dev->pll_freq);
+
+	if (chip_major == 0x33) {
+		ene_warn("chips 0x33xx aren't supported");
+		return -ENODEV;
+	}
+
+	if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_C;
+		ene_notice("KB3926C detected");
+	} else if (old_ver == 0x24 && hw_revision == 0xC0) {
+		dev->hw_revision = ENE_HW_B;
+		ene_notice("KB3926B detected");
+	} else {
+		dev->hw_revision = ENE_HW_D;
+		ene_notice("KB3926D or higher detected");
+	}
+
+	/* detect features hardware supports */
+	if (dev->hw_revision < ENE_HW_C)
+		return 0;
+
+	fw_reg1 = ene_read_reg(dev, ENE_FW1);
+	fw_reg2 = ene_read_reg(dev, ENE_FW2);
+
+	ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
+
+	dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
+	dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
+	dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);
+
+	if (dev->hw_learning_and_tx_capable)
+		dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
+
+	ene_notice("Hardware features:");
+
+	if (dev->hw_learning_and_tx_capable) {
+		ene_notice("* Supports transmitting & learning mode");
+		ene_notice("   This feature is rare and therefore,");
+		ene_notice("   you are welcome to test it,");
+		ene_notice("   and/or contact the author via:");
+		ene_notice("   lirc-list@lists.sourceforge.net");
+		ene_notice("   or maximlevitsky@gmail.com");
+
+		ene_notice("* Uses GPIO %s for IR raw input",
+			dev->hw_use_gpio_0a ? "40" : "0A");
+
+		if (dev->hw_fan_input)
+			ene_notice("* Uses unused fan feedback input as source"
+					" of demodulated IR data");
+	}
+
+	if (!dev->hw_fan_input)
+		ene_notice("* Uses GPIO %s for IR demodulated input",
+			dev->hw_use_gpio_0a ? "0A" : "40");
+
+	if (dev->hw_extra_buffer)
+		ene_notice("* Uses new style input buffer");
+	return 0;
+}
+
+/* Read properities of hw sample buffer */
+static void ene_rx_setup_hw_buffer(struct ene_device *dev)
+{
+	u16 tmp;
+
+	ene_rx_read_hw_pointer(dev);
+	dev->r_pointer = dev->w_pointer;
+
+	if (!dev->hw_extra_buffer) {
+		dev->buffer_len = ENE_FW_PACKET_SIZE * 2;
+		return;
+	}
+
+	tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);
+	tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;
+	dev->extra_buf1_address = tmp;
+
+	dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);
+
+	tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);
+	tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;
+	dev->extra_buf2_address = tmp;
+
+	dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);
+
+	dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
+
+	ene_notice("Hardware uses 2 extended buffers:");
+	ene_notice("  0x%04x - len : %d", dev->extra_buf1_address,
+						dev->extra_buf1_len);
+	ene_notice("  0x%04x - len : %d", dev->extra_buf2_address,
+						dev->extra_buf2_len);
+
+	ene_notice("Total buffer len = %d", dev->buffer_len);
+
+	if (dev->buffer_len > 64 || dev->buffer_len < 16)
+		goto error;
+
+	if (dev->extra_buf1_address > 0xFBFC ||
+					dev->extra_buf1_address < 0xEC00)
+		goto error;
+
+	if (dev->extra_buf2_address > 0xFBFC ||
+					dev->extra_buf2_address < 0xEC00)
+		goto error;
+
+	if (dev->r_pointer > dev->buffer_len)
+		goto error;
+
+	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+	return;
+error:
+	ene_warn("Error validating extra buffers, device probably won't work");
+	dev->hw_extra_buffer = false;
+	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+}
+
+
+/* Restore the pointers to extra buffers - to make module reload work*/
+static void ene_rx_restore_hw_buffer(struct ene_device *dev)
+{
+	if (!dev->hw_extra_buffer)
+		return;
+
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,
+				dev->extra_buf1_address & 0xFF);
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,
+				dev->extra_buf1_address >> 8);
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);
+
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,
+				dev->extra_buf2_address & 0xFF);
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,
+				dev->extra_buf2_address >> 8);
+	ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,
+				dev->extra_buf2_len);
+	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+}
+
+/* Read hardware write pointer */
+static void ene_rx_read_hw_pointer(struct ene_device *dev)
+{
+	if (dev->hw_extra_buffer)
+		dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);
+	else
+		dev->w_pointer = ene_read_reg(dev, ENE_FW2)
+			& ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;
+
+	dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",
+		dev->w_pointer, dev->r_pointer);
+}
+
+/* Gets address of next sample from HW ring buffer */
+static int ene_rx_get_sample_reg(struct ene_device *dev)
+{
+	int r_pointer;
+
+	if (dev->r_pointer == dev->w_pointer) {
+		dbg_verbose("RB: hit end, try update w_pointer");
+		ene_rx_read_hw_pointer(dev);
+	}
+
+	if (dev->r_pointer == dev->w_pointer) {
+		dbg_verbose("RB: end of data at %d", dev->r_pointer);
+		return 0;
+	}
+
+	dbg_verbose("RB: reading at offset %d", dev->r_pointer);
+	r_pointer = dev->r_pointer;
+
+	dev->r_pointer++;
+	if (dev->r_pointer == dev->buffer_len)
+		dev->r_pointer = 0;
+
+	dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);
+
+	if (r_pointer < 8) {
+		dbg_verbose("RB: read at main buffer at %d", r_pointer);
+		return ENE_FW_SAMPLE_BUFFER + r_pointer;
+	}
+
+	r_pointer -= 8;
+
+	if (r_pointer < dev->extra_buf1_len) {
+		dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);
+		return dev->extra_buf1_address + r_pointer;
+	}
+
+	r_pointer -= dev->extra_buf1_len;
+
+	if (r_pointer < dev->extra_buf2_len) {
+		dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);
+		return dev->extra_buf2_address + r_pointer;
+	}
+
+	dbg("attempt to read beyong ring bufer end");
+	return 0;
+}
+
+/* Sense current received carrier */
+void ene_rx_sense_carrier(struct ene_device *dev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+
+	int carrier, duty_cycle;
+	int period = ene_read_reg(dev, ENE_CIRCAR_PRD);
+	int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);
+
+	if (!(period & ENE_CIRCAR_PRD_VALID))
+		return;
+
+	period &= ~ENE_CIRCAR_PRD_VALID;
+
+	if (!period)
+		return;
+
+	dbg("RX: hardware carrier period = %02x", period);
+	dbg("RX: hardware carrier pulse period = %02x", hperiod);
+
+	carrier = 2000000 / period;
+	duty_cycle = (hperiod * 100) / period;
+	dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",
+						carrier, duty_cycle);
+	if (dev->carrier_detect_enabled) {
+		ev.carrier_report = true;
+		ev.carrier = carrier;
+		ev.duty_cycle = duty_cycle;
+		ir_raw_event_store(dev->idev, &ev);
+	}
+}
+
+/* this enables/disables the CIR RX engine */
+static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)
+{
+	ene_set_clear_reg_mask(dev, ENE_CIRCFG,
+			ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);
+}
+
+/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/
+static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)
+{
+	ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);
+}
+
+/*
+ * this enables alternative input via fan tachometer sensor and bypasses
+ * the hw CIR engine
+ */
+static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)
+{
+	if (!dev->hw_fan_input)
+		return;
+
+	if (!enable)
+		ene_write_reg(dev, ENE_FAN_AS_IN1, 0);
+	else {
+		ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+		ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+	}
+}
+
+/* setup the receiver for RX*/
+static void ene_rx_setup(struct ene_device *dev)
+{
+	bool learning_mode = dev->learning_mode_enabled ||
+					dev->carrier_detect_enabled;
+	int sample_period_adjust = 0;
+
+	dbg("RX: setup receiver, learning mode = %d", learning_mode);
+
+
+	/* This selects RLC input and clears CFG2 settings */
+	ene_write_reg(dev, ENE_CIRCFG2, 0x00);
+
+	/* set sample period*/
+	if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)
+		sample_period_adjust =
+			dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;
+
+	ene_write_reg(dev, ENE_CIRRLC_CFG,
+			(sample_period + sample_period_adjust) |
+						ENE_CIRRLC_CFG_OVERFLOW);
+	/* revB doesn't support inputs */
+	if (dev->hw_revision < ENE_HW_C)
+		goto select_timeout;
+
+	if (learning_mode) {
+
+		WARN_ON(!dev->hw_learning_and_tx_capable);
+
+		/* Enable the opposite of the normal input
+		That means that if GPIO40 is normally used, use GPIO0A
+		and vice versa.
+		This input will carry non demodulated
+		signal, and we will tell the hw to demodulate it itself */
+		ene_rx_select_input(dev, !dev->hw_use_gpio_0a);
+		dev->rx_fan_input_inuse = false;
+
+		/* Enable carrier demodulation */
+		ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
+
+		/* Enable carrier detection */
+		ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);
+		ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,
+			dev->carrier_detect_enabled || debug);
+	} else {
+		if (dev->hw_fan_input)
+			dev->rx_fan_input_inuse = true;
+		else
+			ene_rx_select_input(dev, dev->hw_use_gpio_0a);
+
+		/* Disable carrier detection & demodulation */
+		ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
+		ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);
+	}
+
+select_timeout:
+	if (dev->rx_fan_input_inuse) {
+		dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+
+		/* Fan input doesn't support timeouts, it just ends the
+			input with a maximum sample */
+		dev->props->min_timeout = dev->props->max_timeout =
+			MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+				ENE_FW_SAMPLE_PERIOD_FAN);
+	} else {
+		dev->props->rx_resolution = MS_TO_NS(sample_period);
+
+		/* Theoreticly timeout is unlimited, but we cap it
+		 * because it was seen that on one device, it
+		 * would stop sending spaces after around 250 msec.
+		 * Besides, this is close to 2^32 anyway and timeout is u32.
+		 */
+		dev->props->min_timeout = MS_TO_NS(127 * sample_period);
+		dev->props->max_timeout = MS_TO_NS(200000);
+	}
+
+	if (dev->hw_learning_and_tx_capable)
+		dev->props->tx_resolution = MS_TO_NS(sample_period);
+
+	if (dev->props->timeout > dev->props->max_timeout)
+		dev->props->timeout = dev->props->max_timeout;
+	if (dev->props->timeout < dev->props->min_timeout)
+		dev->props->timeout = dev->props->min_timeout;
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+	u8 reg_value;
+
+	/* Enable system interrupt */
+	if (dev->hw_revision < ENE_HW_C) {
+		ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+		ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+	} else {
+		reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;
+		reg_value |= ENE_IRQ_UNK_EN;
+		reg_value &= ~ENE_IRQ_STATUS;
+		reg_value |= (dev->irq & ENE_IRQ_MASK);
+		ene_write_reg(dev, ENE_IRQ, reg_value);
+	}
+
+	/* Enable inputs */
+	ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);
+	ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);
+
+	/* ack any pending irqs - just in case */
+	ene_irq_status(dev);
+
+	/* enable firmware bits */
+	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	/* enter idle mode */
+	ir_raw_event_set_idle(dev->idev, true);
+	dev->rx_enabled = true;
+}
+
+/* Disable the device receiver */
+static void ene_rx_disable(struct ene_device *dev)
+{
+	/* disable inputs */
+	ene_rx_enable_cir_engine(dev, false);
+	ene_rx_enable_fan_input(dev, false);
+
+	/* disable hardware IRQ and firmware flag */
+	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+	ir_raw_event_set_idle(dev->idev, true);
+	dev->rx_enabled = false;
+}
+
+/* This resets the receiver. Usefull to stop stream of spaces at end of
+ * transmission
+ */
+static void ene_rx_reset(struct ene_device *dev)
+{
+	ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
+	ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
+}
+
+/* Set up the TX carrier frequency and duty cycle */
+static void ene_tx_set_carrier(struct ene_device *dev)
+{
+	u8 tx_puls_width;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_set_clear_reg_mask(dev, ENE_CIRCFG,
+		ENE_CIRCFG_TX_CARR, dev->tx_period > 0);
+
+	if (!dev->tx_period)
+		goto unlock;
+
+	BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);
+
+	tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);
+
+	if (!tx_puls_width)
+		tx_puls_width = 1;
+
+	dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);
+	dbg("TX: pulse width = %d * 500 ns", tx_puls_width);
+
+	ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);
+	ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);
+unlock:
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* Enable/disable transmitters */
+static void ene_tx_set_transmitters(struct ene_device *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,
+					!!(dev->transmitter_mask & 0x01));
+	ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,
+					!!(dev->transmitter_mask & 0x02));
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* prepare transmission */
+static void ene_tx_enable(struct ene_device *dev)
+{
+	u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);
+	u8 fwreg2 = ene_read_reg(dev, ENE_FW2);
+
+	dev->saved_conf1 = conf1;
+
+	/* Show information about currently connected transmitter jacks */
+	if (fwreg2 & ENE_FW2_EMMITER1_CONN)
+		dbg("TX: Transmitter #1 is connected");
+
+	if (fwreg2 & ENE_FW2_EMMITER2_CONN)
+		dbg("TX: Transmitter #2 is connected");
+
+	if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
+		ene_warn("TX: transmitter cable isn't connected!");
+
+	/* disable receive on revc */
+	if (dev->hw_revision == ENE_HW_C)
+		conf1 &= ~ENE_CIRCFG_RX_EN;
+
+	/* Enable TX engine */
+	conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;
+	ene_write_reg(dev, ENE_CIRCFG, conf1);
+}
+
+/* end transmission */
+static void ene_tx_disable(struct ene_device *dev)
+{
+	ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);
+	dev->tx_buffer = NULL;
+}
+
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+	u8 raw_tx;
+	u32 sample;
+	bool pulse = dev->tx_sample_pulse;
+
+	if (!dev->tx_buffer) {
+		ene_warn("TX: BUG: attempt to transmit NULL buffer");
+		return;
+	}
+
+	/* Grab next TX sample */
+	if (!dev->tx_sample) {
+
+		if (dev->tx_pos == dev->tx_len) {
+			if (!dev->tx_done) {
+				dbg("TX: no more data to send");
+				dev->tx_done = true;
+				goto exit;
+			} else {
+				dbg("TX: last sample sent by hardware");
+				ene_tx_disable(dev);
+				complete(&dev->tx_complete);
+				return;
+			}
+		}
+
+		sample = dev->tx_buffer[dev->tx_pos++];
+		dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+		dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);
+
+		if (!dev->tx_sample)
+			dev->tx_sample = 1;
+	}
+
+	raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);
+	dev->tx_sample -= raw_tx;
+
+	dbg("TX: sample %8d (%s)", raw_tx * sample_period,
+						pulse ? "pulse" : "space");
+	if (pulse)
+		raw_tx |= ENE_CIRRLC_OUT_PULSE;
+
+	ene_write_reg(dev,
+		dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);
+
+	dev->tx_reg = !dev->tx_reg;
+exit:
+	/* simulate TX done interrupt */
+	if (txsim)
+		mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_tx_sample(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+	u8 irq_status;
+	u8 fw_flags1, fw_flags2;
+	int retval = 0;
+
+	fw_flags2 = ene_read_reg(dev, ENE_FW2);
+
+	if (dev->hw_revision < ENE_HW_C) {
+		irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);
+
+		if (!(irq_status & ENEB_IRQ_STATUS_IR))
+			return 0;
+
+		ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);
+		return ENE_IRQ_RX;
+	}
+
+	irq_status = ene_read_reg(dev, ENE_IRQ);
+	if (!(irq_status & ENE_IRQ_STATUS))
+		return 0;
+
+	/* original driver does that twice - a workaround ? */
+	ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
+	ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
+
+	/* check RX interrupt */
+	if (fw_flags2 & ENE_FW2_RXIRQ) {
+		retval |= ENE_IRQ_RX;
+		ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);
+	}
+
+	/* check TX interrupt */
+	fw_flags1 = ene_read_reg(dev, ENE_FW1);
+	if (fw_flags1 & ENE_FW1_TXIRQ) {
+		ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+		retval |= ENE_IRQ_TX;
+	}
+
+	return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+	u16 hw_value, reg;
+	int hw_sample, irq_status;
+	bool pulse;
+	unsigned long flags;
+	irqreturn_t retval = IRQ_NONE;
+	struct ene_device *dev = (struct ene_device *)data;
+	DEFINE_IR_RAW_EVENT(ev);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	dbg_verbose("ISR called");
+	ene_rx_read_hw_pointer(dev);
+	irq_status = ene_irq_status(dev);
+
+	if (!irq_status)
+		goto unlock;
+
+	retval = IRQ_HANDLED;
+
+	if (irq_status & ENE_IRQ_TX) {
+		dbg_verbose("TX interrupt");
+		if (!dev->hw_learning_and_tx_capable) {
+			dbg("TX interrupt on unsupported device!");
+			goto unlock;
+		}
+		ene_tx_sample(dev);
+	}
+
+	if (!(irq_status & ENE_IRQ_RX))
+		goto unlock;
+
+	dbg_verbose("RX interrupt");
+
+	if (dev->hw_learning_and_tx_capable)
+		ene_rx_sense_carrier(dev);
+
+	/* On hardware that don't support extra buffer we need to trust
+		the interrupt and not track the read pointer */
+	if (!dev->hw_extra_buffer)
+		dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;
+
+	while (1) {
+
+		reg = ene_rx_get_sample_reg(dev);
+
+		dbg_verbose("next sample to read at: %04x", reg);
+		if (!reg)
+			break;
+
+		hw_value = ene_read_reg(dev, reg);
+
+		if (dev->rx_fan_input_inuse) {
+
+			int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;
+
+			/* read high part of the sample */
+			hw_value |= ene_read_reg(dev, reg + offset) << 8;
+			pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;
+
+			/* clear space bit, and other unused bits */
+			hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;
+			hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;
+
+		} else {
+			pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);
+			hw_value &= ~ENE_FW_SAMPLE_SPACE;
+			hw_sample = hw_value * sample_period;
+
+			if (dev->rx_period_adjust) {
+				hw_sample *= 100;
+				hw_sample /= (100 + dev->rx_period_adjust);
+			}
+		}
+
+		if (!dev->hw_extra_buffer && !hw_sample) {
+			dev->r_pointer = dev->w_pointer;
+			continue;
+		}
+
+		dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+		ev.duration = MS_TO_NS(hw_sample);
+		ev.pulse = pulse;
+		ir_raw_event_store_with_filter(dev->idev, &ev);
+	}
+
+	ir_raw_event_handle(dev->idev);
+unlock:
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_default_settings(struct ene_device *dev)
+{
+	dev->tx_period = 32;
+	dev->tx_duty_cycle = 50; /*%*/
+	dev->transmitter_mask = 0x03;
+	dev->learning_mode_enabled = learning_mode_force;
+
+	/* Set reasonable default timeout */
+	dev->props->timeout = MS_TO_NS(150000);
+}
+
+/* Upload all hardware settings at once. Used at load and resume time */
+static void ene_setup_hw_settings(struct ene_device *dev)
+{
+	if (dev->hw_learning_and_tx_capable) {
+		ene_tx_set_carrier(dev);
+		ene_tx_set_transmitters(dev);
+	}
+
+	ene_rx_setup(dev);
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_rx_disable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+	/* invalid txmask */
+	if (!tx_mask || tx_mask & ~0x03) {
+		dbg("TX: invalid mask");
+		/* return count of transmitters */
+		return 2;
+	}
+
+	dev->transmitter_mask = tx_mask;
+	ene_tx_set_transmitters(dev);
+	return 0;
+}
+
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	u32 period = 2000000 / carrier;
+
+	dbg("TX: attempt to set tx carrier to %d kHz", carrier);
+
+	if (period && (period > ENE_CIRMOD_PRD_MAX ||
+			period < ENE_CIRMOD_PRD_MIN)) {
+
+		dbg("TX: out of range %d-%d kHz carrier",
+			2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);
+		return -1;
+	}
+
+	dev->tx_period = period;
+	ene_tx_set_carrier(dev);
+	return 0;
+}
+
+/*outside interface : set tx duty cycle */
+static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	dbg("TX: setting duty cycle to %d%%", duty_cycle);
+	dev->tx_duty_cycle = duty_cycle;
+	ene_tx_set_carrier(dev);
+	return 0;
+}
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+	if (enable == dev->learning_mode_enabled)
+		return 0;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->learning_mode_enabled = enable;
+	ene_rx_disable(dev);
+	ene_rx_setup(dev);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+static int ene_set_carrier_report(void *data, int enable)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	if (enable == dev->carrier_detect_enabled)
+		return 0;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	dev->carrier_detect_enabled = enable;
+	ene_rx_disable(dev);
+	ene_rx_setup(dev);
+	ene_rx_enable(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+	return 0;
+}
+
+/* outside interface: enable or disable idle mode */
+static void ene_set_idle(void *data, bool idle)
+{
+	if (idle) {
+		ene_rx_reset((struct ene_device *)data);
+		dbg("RX: end of data");
+	}
+}
+
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+	struct ene_device *dev = (struct ene_device *)data;
+	unsigned long flags;
+
+	dev->tx_buffer = buf;
+	dev->tx_len = n / sizeof(int);
+	dev->tx_pos = 0;
+	dev->tx_reg = 0;
+	dev->tx_done = 0;
+	dev->tx_sample = 0;
+	dev->tx_sample_pulse = 0;
+
+	dbg("TX: %d samples", dev->tx_len);
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+
+	ene_tx_enable(dev);
+
+	/* Transmit first two samples */
+	ene_tx_sample(dev);
+	ene_tx_sample(dev);
+
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+		dbg("TX: timeout");
+		spin_lock_irqsave(&dev->hw_lock, flags);
+		ene_tx_disable(dev);
+		spin_unlock_irqrestore(&dev->hw_lock, flags);
+	} else
+		dbg("TX: done");
+	return n;
+}
+
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
+{
+	int error = -ENOMEM;
+	struct ir_dev_props *ir_props;
+	struct input_dev *input_dev;
+	struct ene_device *dev;
+
+	/* allocate memory */
+	input_dev = input_allocate_device();
+	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+	if (!input_dev || !ir_props || !dev)
+		goto error1;
+
+	/* validate resources */
+	error = -ENODEV;
+
+	if (!pnp_port_valid(pnp_dev, 0) ||
+	    pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
+		goto error;
+
+	if (!pnp_irq_valid(pnp_dev, 0))
+		goto error;
+
+	spin_lock_init(&dev->hw_lock);
+
+	/* claim the resources */
+	error = -EBUSY;
+	dev->hw_io = pnp_port_start(pnp_dev, 0);
+	if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
+		dev->hw_io = -1;
+		dev->irq = -1;
+		goto error;
+	}
+
+	dev->irq = pnp_irq(pnp_dev, 0);
+	if (request_irq(dev->irq, ene_isr,
+			IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
+		dev->irq = -1;
+		goto error;
+	}
+
+	pnp_set_drvdata(pnp_dev, dev);
+	dev->pnp_dev = pnp_dev;
+
+	/* don't allow too short/long sample periods */
+	if (sample_period < 5 || sample_period > 0x7F)
+		sample_period = ENE_DEFAULT_SAMPLE_PERIOD;
+
+	/* detect hardware version and features */
+	error = ene_hw_detect(dev);
+	if (error)
+		goto error;
+
+	if (!dev->hw_learning_and_tx_capable && txsim) {
+		dev->hw_learning_and_tx_capable = true;
+		setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+						(long unsigned int)dev);
+		ene_warn("Simulation of TX activated");
+	}
+
+	if (!dev->hw_learning_and_tx_capable)
+		learning_mode_force = false;
+
+	ir_props->driver_type = RC_DRIVER_IR_RAW;
+	ir_props->allowed_protos = IR_TYPE_ALL;
+	ir_props->priv = dev;
+	ir_props->open = ene_open;
+	ir_props->close = ene_close;
+	ir_props->s_idle = ene_set_idle;
+
+	dev->props = ir_props;
+	dev->idev = input_dev;
+
+	if (dev->hw_learning_and_tx_capable) {
+		ir_props->s_learning_mode = ene_set_learning_mode;
+		init_completion(&dev->tx_complete);
+		ir_props->tx_ir = ene_transmit;
+		ir_props->s_tx_mask = ene_set_tx_mask;
+		ir_props->s_tx_carrier = ene_set_tx_carrier;
+		ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
+		ir_props->s_carrier_report = ene_set_carrier_report;
+	}
+
+	ene_rx_setup_hw_buffer(dev);
+	ene_setup_default_settings(dev);
+	ene_setup_hw_settings(dev);
+
+	device_set_wakeup_capable(&pnp_dev->dev, true);
+	device_set_wakeup_enable(&pnp_dev->dev, true);
+
+	if (dev->hw_learning_and_tx_capable)
+		input_dev->name = "ENE eHome Infrared Remote Transceiver";
+	else
+		input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+	error = -ENODEV;
+	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+							ENE_DRIVER_NAME))
+		goto error;
+
+	ene_notice("driver has been succesfully loaded");
+	return 0;
+error:
+	if (dev && dev->irq >= 0)
+		free_irq(dev->irq, dev);
+	if (dev && dev->hw_io >= 0)
+		release_region(dev->hw_io, ENE_IO_SIZE);
+error1:
+	input_free_device(input_dev);
+	kfree(ir_props);
+	kfree(dev);
+	return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->hw_lock, flags);
+	ene_rx_disable(dev);
+	ene_rx_restore_hw_buffer(dev);
+	spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+	free_irq(dev->irq, dev);
+	release_region(dev->hw_io, ENE_IO_SIZE);
+	ir_input_unregister(dev->idev);
+	kfree(dev->props);
+	kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+	enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+	dbg("wake on IR %s", enable ? "enabled" : "disabled");
+	ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, true);
+
+	/* TODO: add support for wake pattern */
+	return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_setup_hw_settings(dev);
+
+	if (dev->rx_enabled)
+		ene_rx_enable(dev);
+
+	ene_enable_wake(dev, false);
+	return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+	struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+	ene_enable_wake(dev, true);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+	{.id = "ENE0100",},
+	{.id = "ENE0200",},
+	{.id = "ENE0201",},
+	{.id = "ENE0202",},
+	{},
+};
+
+static struct pnp_driver ene_driver = {
+	.name = ENE_DRIVER_NAME,
+	.id_table = ene_ids,
+	.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+	.probe = ene_probe,
+	.remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+	.suspend = ene_suspend,
+	.resume = ene_resume,
+#endif
+	.shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+	return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+	pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(learning_mode_force, bool, S_IRUGO);
+MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+	"Simulate TX features on unsupported hardware (dangerous)");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+	("Infrared input driver for KB3926B/C/D/E/F "
+	"(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
new file mode 100644
index 000000000000..f5870667a433
--- /dev/null
+++ b/drivers/media/rc/ene_ir.h
@@ -0,0 +1,262 @@
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_IO_SIZE		4
+
+/* 8 bytes of samples, divided in 2 packets*/
+#define ENE_FW_SAMPLE_BUFFER	0xF8F0	/* sample buffer */
+#define ENE_FW_SAMPLE_SPACE	0x80	/* sample is space */
+#define ENE_FW_PACKET_SIZE	4
+
+/* first firmware flag register */
+#define ENE_FW1			0xF8F8  /* flagr */
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_HAS_EXTRA_BUF	0x04	/* fw uses extra buffer*/
+#define ENE_FW1_EXTRA_BUF_HND	0x08	/* extra buffer handshake bit*/
+#define ENE_FW1_LED_ON		0x10	/* turn on a led */
+
+#define ENE_FW1_WPATTERN	0x20	/* enable wake pattern */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware flag register */
+#define ENE_FW2			0xF8F9  /* flagw */
+#define ENE_FW2_BUF_WPTR	0x01	/* which half of the buffer to read */
+#define ENE_FW2_RXIRQ		0x04	/* RX IRQ pending*/
+#define ENE_FW2_GP0A		0x08	/* Use GPIO0A for demodulated input */
+#define ENE_FW2_EMMITER1_CONN	0x10	/* TX emmiter 1 connected */
+#define ENE_FW2_EMMITER2_CONN	0x20	/* TX emmiter 2 connected */
+
+#define ENE_FW2_FAN_INPUT	0x40	/* fan input used for demodulated data*/
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* firmware RX pointer for new style buffer */
+#define ENE_FW_RX_POINTER	0xF8FA
+
+/* high parts of samples for fan input (8 samples)*/
+#define ENE_FW_SMPL_BUF_FAN	0xF8FB
+#define ENE_FW_SMPL_BUF_FAN_PLS	0x8000	/* combined sample is pulse */
+#define ENE_FW_SMPL_BUF_FAN_MSK	0x0FFF  /* combined sample maximum value */
+#define ENE_FW_SAMPLE_PERIOD_FAN 61	/* fan input has fixed sample period */
+
+/* transmitter ports */
+#define ENE_GPIOFS1		0xFC01
+#define ENE_GPIOFS1_GPIO0D	0x20	/* enable tx output on GPIO0D */
+#define ENE_GPIOFS8		0xFC08
+#define ENE_GPIOFS8_GPIO41	0x02	/* enable tx output on GPIO40 */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+
+/* IRQ registers block (for revision C,D) */
+#define ENE_IRQ			0xFE9B	/* new irq settings register */
+#define ENE_IRQ_MASK		0x0F	/* irq number mask */
+#define ENE_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENE_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR Config register #1 */
+#define ENE_CIRCFG		0xFEC0
+#define ENE_CIRCFG_RX_EN	0x01	/* RX enable */
+#define ENE_CIRCFG_RX_IRQ	0x02	/* Enable hardware interrupt */
+#define ENE_CIRCFG_REV_POL	0x04	/* Input polarity reversed */
+#define ENE_CIRCFG_CARR_DEMOD	0x08	/* Enable carrier demodulator */
+
+#define ENE_CIRCFG_TX_EN	0x10	/* TX enable */
+#define ENE_CIRCFG_TX_IRQ	0x20	/* Send interrupt on TX done */
+#define ENE_CIRCFG_TX_POL_REV	0x40	/* TX polarity reversed */
+#define ENE_CIRCFG_TX_CARR	0x80	/* send TX carrier or not */
+
+/* CIR config register #2 */
+#define ENE_CIRCFG2		0xFEC1
+#define ENE_CIRCFG2_RLC		0x00
+#define ENE_CIRCFG2_RC5		0x01
+#define ENE_CIRCFG2_RC6		0x02
+#define ENE_CIRCFG2_NEC		0x03
+#define ENE_CIRCFG2_CARR_DETECT	0x10	/* Enable carrier detection */
+#define ENE_CIRCFG2_GPIO0A	0x20	/* Use GPIO0A instead of GPIO40 for input */
+#define ENE_CIRCFG2_FAST_SAMPL1	0x40	/* Fast leading pulse detection for RC6 */
+#define ENE_CIRCFG2_FAST_SAMPL2	0x80	/* Fast data detection for RC6 */
+
+/* Knobs for protocol decoding - will document when/if will use them */
+#define ENE_CIRPF		0xFEC2
+#define ENE_CIRHIGH		0xFEC3
+#define ENE_CIRBIT		0xFEC4
+#define ENE_CIRSTART		0xFEC5
+#define ENE_CIRSTART2		0xFEC6
+
+/* Actual register which contains RLC RX data - read by firmware */
+#define ENE_CIRDAT_IN		0xFEC7
+
+
+/* RLC configuration - sample period (1us resulution) + idle mode */
+#define ENE_CIRRLC_CFG		0xFEC8
+#define ENE_CIRRLC_CFG_OVERFLOW	0x80	/* interrupt on overflows if set */
+#define ENE_DEFAULT_SAMPLE_PERIOD 50
+
+/* Two byte RLC TX buffer */
+#define ENE_CIRRLC_OUT0		0xFEC9
+#define ENE_CIRRLC_OUT1		0xFECA
+#define ENE_CIRRLC_OUT_PULSE	0x80	/* Transmitted sample is pulse */
+#define ENE_CIRRLC_OUT_MASK	0x7F
+
+
+/* Carrier detect setting
+ * Low nibble  - number of carrier pulses to average
+ * High nibble - number of initial carrier pulses to discard
+ */
+#define ENE_CIRCAR_PULS		0xFECB
+
+/* detected RX carrier period (resolution: 500 ns) */
+#define ENE_CIRCAR_PRD		0xFECC
+#define ENE_CIRCAR_PRD_VALID	0x80	/* data valid content valid */
+
+/* detected RX carrier pulse width (resolution: 500 ns) */
+#define ENE_CIRCAR_HPRD		0xFECD
+
+/* TX period (resolution: 500 ns, minimum 2)*/
+#define ENE_CIRMOD_PRD		0xFECE
+#define ENE_CIRMOD_PRD_POL	0x80	/* TX carrier polarity*/
+
+#define ENE_CIRMOD_PRD_MAX	0x7F	/* 15.87 kHz */
+#define ENE_CIRMOD_PRD_MIN	0x02	/* 1 Mhz */
+
+/* TX pulse width (resolution: 500 ns)*/
+#define ENE_CIRMOD_HPRD		0xFECF
+
+/* Hardware versions */
+#define ENE_ECHV		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+#define ENE_DEFAULT_PLL_FREQ	1000
+
+#define ENE_ECSTS		0xFF1D
+#define ENE_ECSTS_RSRVD		0x04
+
+#define ENE_ECVER_MAJOR		0xFF1E	/* chip version */
+#define ENE_ECVER_MINOR		0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"ene_ir"
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D or later */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
+
+#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
+#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
+
+
+#define __dbg(level, format, ...) \
+	do { \
+		if (debug >= level) \
+			printk(KERN_DEBUG ENE_DRIVER_NAME \
+				": " format "\n", ## __VA_ARGS__); \
+	} while (0)
+
+
+#define dbg(format, ...)		__dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...)	__dbg(2, format, ## __VA_ARGS__)
+#define dbg_regs(format, ...)		__dbg(3, format, ## __VA_ARGS__)
+
+#define MS_TO_NS(msec) ((msec) * 1000)
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+
+	/* hw IO settings */
+	long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	bool hw_use_gpio_0a;			/* gpio0a is demodulated input*/
+	bool hw_extra_buffer;			/* hardware has 'extra buffer' */
+	bool hw_fan_input;			/* fan input is IR data source */
+	bool hw_learning_and_tx_capable;	/* learning & tx capable */
+	int  pll_freq;
+	int buffer_len;
+
+	/* Extra RX buffer location */
+	int extra_buf1_address;
+	int extra_buf1_len;
+	int extra_buf2_address;
+	int extra_buf2_len;
+
+	/* HW state*/
+	int r_pointer;				/* pointer to next sample to read */
+	int w_pointer;				/* pointer to next sample hw will write */
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+	unsigned int tx_sample;			/* current sample for TX */
+	bool tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	int *tx_buffer;				/* input samples buffer*/
+	int tx_pos;				/* position in that bufer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/* TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_mode_enabled;		/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
+	bool rx_enabled;
+};
+
+static int ene_irq_status(struct ene_device *dev);
+static void ene_rx_read_hw_pointer(struct ene_device *dev);
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
new file mode 100644
index 000000000000..79f4f58c2ea4
--- /dev/null
+++ b/drivers/media/rc/imon.c
@@ -0,0 +1,2465 @@
+/*
+ *   imon.c:	input and display driver for SoundGraph iMON IR/VFD/LCD
+ *
+ *   Copyright(C) 2010  Jarod Wilson <jarod@wilsonet.com>
+ *   Portions based on the original lirc_imon driver,
+ *	Copyright(C) 2004  Venky Raju(dev@venky.ws)
+ *
+ *   Huge thanks to R. Geoff Newbury for invaluable debugging on the
+ *   0xffdc iMON devices, and for sending me one to hack on, without
+ *   which the support for them wouldn't be nearly as good. Thanks
+ *   also to the numerous 0xffdc device owners that tested auto-config
+ *   support for me and provided debug dumps from their devices.
+ *
+ *   imon is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
+#define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME	"imon"
+#define MOD_VERSION	"0.9.2"
+
+#define DISPLAY_MINOR_BASE	144
+#define DEVICE_NAME	"lcd%d"
+
+#define BUF_CHUNK_SIZE	8
+#define BUF_SIZE	128
+
+#define BIT_DURATION	250	/* each bit received is 250us */
+
+#define IMON_CLOCK_ENABLE_PACKETS	2
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+		      const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback_intf0(struct urb *urb);
+static void usb_rx_callback_intf1(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos);
+
+/* LCD file_operations override function prototypes */
+static ssize_t lcd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos);
+
+/*** G L O B A L S ***/
+
+struct imon_context {
+	struct device *dev;
+	struct ir_dev_props *props;
+	/* Newer devices have two interfaces */
+	struct usb_device *usbdev_intf0;
+	struct usb_device *usbdev_intf1;
+
+	bool display_supported;		/* not all controllers do */
+	bool display_isopen;		/* display port has been opened */
+	bool rf_device;			/* true if iMON 2.4G LT/DT RF device */
+	bool rf_isassociating;		/* RF remote associating */
+	bool dev_present_intf0;		/* USB device presence, interface 0 */
+	bool dev_present_intf1;		/* USB device presence, interface 1 */
+
+	struct mutex lock;		/* to lock this object */
+	wait_queue_head_t remove_ok;	/* For unexpected USB disconnects */
+
+	struct usb_endpoint_descriptor *rx_endpoint_intf0;
+	struct usb_endpoint_descriptor *rx_endpoint_intf1;
+	struct usb_endpoint_descriptor *tx_endpoint;
+	struct urb *rx_urb_intf0;
+	struct urb *rx_urb_intf1;
+	struct urb *tx_urb;
+	bool tx_control;
+	unsigned char usb_rx_buf[8];
+	unsigned char usb_tx_buf[8];
+
+	struct tx_t {
+		unsigned char data_buf[35];	/* user data buffer */
+		struct completion finished;	/* wait for write to finish */
+		bool busy;			/* write in progress */
+		int status;			/* status of tx completion */
+	} tx;
+
+	u16 vendor;			/* usb vendor ID */
+	u16 product;			/* usb product ID */
+
+	struct input_dev *rdev;		/* input device for remote */
+	struct input_dev *idev;		/* input device for panel & IR mouse */
+	struct input_dev *touch;	/* input device for touchscreen */
+
+	spinlock_t kc_lock;		/* make sure we get keycodes right */
+	u32 kc;				/* current input keycode */
+	u32 last_keycode;		/* last reported input keycode */
+	u32 rc_scancode;		/* the computed remote scancode */
+	u8 rc_toggle;			/* the computed remote toggle bit */
+	u64 ir_type;			/* iMON or MCE (RC6) IR protocol? */
+	bool release_code;		/* some keys send a release code */
+
+	u8 display_type;		/* store the display type */
+	bool pad_mouse;			/* toggle kbd(0)/mouse(1) mode */
+
+	char name_rdev[128];		/* rc input device name */
+	char phys_rdev[64];		/* rc input device phys path */
+
+	char name_idev[128];		/* input device name */
+	char phys_idev[64];		/* input device phys path */
+
+	char name_touch[128];		/* touch screen name */
+	char phys_touch[64];		/* touch screen phys path */
+	struct timer_list ttimer;	/* touch screen timer */
+	int touch_x;			/* x coordinate on touchscreen */
+	int touch_y;			/* y coordinate on touchscreen */
+};
+
+#define TOUCH_TIMEOUT	(HZ/30)
+
+/* vfd character device file operations */
+static const struct file_operations vfd_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &display_open,
+	.write		= &vfd_write,
+	.release	= &display_close,
+	.llseek		= noop_llseek,
+};
+
+/* lcd character device file operations */
+static const struct file_operations lcd_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &display_open,
+	.write		= &lcd_write,
+	.release	= &display_close,
+	.llseek		= noop_llseek,
+};
+
+enum {
+	IMON_DISPLAY_TYPE_AUTO = 0,
+	IMON_DISPLAY_TYPE_VFD  = 1,
+	IMON_DISPLAY_TYPE_LCD  = 2,
+	IMON_DISPLAY_TYPE_VGA  = 3,
+	IMON_DISPLAY_TYPE_NONE = 4,
+};
+
+enum {
+	IMON_KEY_IMON	= 0,
+	IMON_KEY_MCE	= 1,
+	IMON_KEY_PANEL	= 2,
+};
+
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2). This driver only supports
+ * the ffdc and later devices, which do onboard decoding.
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+	/*
+	 * Several devices with this same device ID, all use iMON_PAD.inf
+	 * SoundGraph iMON PAD (IR & VFD)
+	 * SoundGraph iMON PAD (IR & LCD)
+	 * SoundGraph iMON Knob (IR only)
+	 */
+	{ USB_DEVICE(0x15c2, 0xffdc) },
+
+	/*
+	 * Newer devices, all driven by the latest iMON Windows driver, full
+	 * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
+	 * Need user input to fill in details on unknown devices.
+	 */
+	/* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
+	{ USB_DEVICE(0x15c2, 0x0034) },
+	/* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
+	{ USB_DEVICE(0x15c2, 0x0035) },
+	/* SoundGraph iMON OEM VFD (IR & VFD) */
+	{ USB_DEVICE(0x15c2, 0x0036) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0037) },
+	/* SoundGraph iMON OEM LCD (IR & LCD) */
+	{ USB_DEVICE(0x15c2, 0x0038) },
+	/* SoundGraph iMON UltraBay (IR & LCD) */
+	{ USB_DEVICE(0x15c2, 0x0039) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003a) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003b) },
+	/* SoundGraph iMON OEM Inside (IR only) */
+	{ USB_DEVICE(0x15c2, 0x003c) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003d) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003e) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x003f) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0040) },
+	/* SoundGraph iMON MINI (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0041) },
+	/* Antec Veris Multimedia Station EZ External (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0042) },
+	/* Antec Veris Multimedia Station Basic Internal (IR only) */
+	{ USB_DEVICE(0x15c2, 0x0043) },
+	/* Antec Veris Multimedia Station Elite (IR & VFD) */
+	{ USB_DEVICE(0x15c2, 0x0044) },
+	/* Antec Veris Multimedia Station Premiere (IR & LCD) */
+	{ USB_DEVICE(0x15c2, 0x0045) },
+	/* device specifics unknown */
+	{ USB_DEVICE(0x15c2, 0x0046) },
+	{}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+	.name		= MOD_NAME,
+	.probe		= imon_probe,
+	.disconnect	= imon_disconnect,
+	.suspend	= imon_suspend,
+	.resume		= imon_resume,
+	.id_table	= imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_vfd_class = {
+	.name		= DEVICE_NAME,
+	.fops		= &vfd_fops,
+	.minor_base	= DISPLAY_MINOR_BASE,
+};
+
+static struct usb_class_driver imon_lcd_class = {
+	.name		= DEVICE_NAME,
+	.fops		= &lcd_fops,
+	.minor_base	= DISPLAY_MINOR_BASE,
+};
+
+/* imon receiver front panel/knob key table */
+static const struct {
+	u64 hw_code;
+	u32 keycode;
+} imon_panel_key_table[] = {
+	{ 0x000000000f00ffeell, KEY_PROG1 }, /* Go */
+	{ 0x000000001f00ffeell, KEY_AUDIO },
+	{ 0x000000002000ffeell, KEY_VIDEO },
+	{ 0x000000002100ffeell, KEY_CAMERA },
+	{ 0x000000002700ffeell, KEY_DVD },
+	{ 0x000000002300ffeell, KEY_TV },
+	{ 0x000000000500ffeell, KEY_PREVIOUS },
+	{ 0x000000000700ffeell, KEY_REWIND },
+	{ 0x000000000400ffeell, KEY_STOP },
+	{ 0x000000003c00ffeell, KEY_PLAYPAUSE },
+	{ 0x000000000800ffeell, KEY_FASTFORWARD },
+	{ 0x000000000600ffeell, KEY_NEXT },
+	{ 0x000000010000ffeell, KEY_RIGHT },
+	{ 0x000001000000ffeell, KEY_LEFT },
+	{ 0x000000003d00ffeell, KEY_SELECT },
+	{ 0x000100000000ffeell, KEY_VOLUMEUP },
+	{ 0x010000000000ffeell, KEY_VOLUMEDOWN },
+	{ 0x000000000100ffeell, KEY_MUTE },
+	/* 0xffdc iMON MCE VFD */
+	{ 0x00010000ffffffeell, KEY_VOLUMEUP },
+	{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+	/* iMON Knob values */
+	{ 0x000100ffffffffeell, KEY_VOLUMEUP },
+	{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
+	{ 0x000008ffffffffeell, KEY_MUTE },
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+/* Module bookkeeping bits */
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+
+static bool debug;
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
+
+/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
+static int display_type;
+module_param(display_type, int, S_IRUGO);
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
+		 "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+
+static int pad_stabilize = 1;
+module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
+		 "presses in arrow key mode. 0=disable, 1=enable (default).");
+
+/*
+ * In certain use cases, mouse mode isn't really helpful, and could actually
+ * cause confusion, so allow disabling it when the IR device is open.
+ */
+static bool nomouse;
+module_param(nomouse, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
+		 "open. 0=don't disable, 1=disable. (default: don't disable)");
+
+/* threshold at which a pad push registers as an arrow key in kbd mode */
+static int pad_thresh;
+module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
+		 "arrow key in kbd mode (default: 28)");
+
+
+static void free_imon_context(struct imon_context *ictx)
+{
+	struct device *dev = ictx->dev;
+
+	usb_free_urb(ictx->tx_urb);
+	usb_free_urb(ictx->rx_urb_intf0);
+	usb_free_urb(ictx->rx_urb_intf1);
+	kfree(ictx);
+
+	dev_dbg(dev, "%s: iMON context freed\n", __func__);
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+	struct usb_interface *interface;
+	struct imon_context *ictx = NULL;
+	int subminor;
+	int retval = 0;
+
+	/* prevent races with disconnect */
+	mutex_lock(&driver_lock);
+
+	subminor = iminor(inode);
+	interface = usb_find_interface(&imon_driver, subminor);
+	if (!interface) {
+		pr_err("could not find interface for minor %d\n", subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+	ictx = usb_get_intfdata(interface);
+
+	if (!ictx) {
+		pr_err("no context found for minor %d\n", subminor);
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->display_supported) {
+		pr_err("display not supported by device\n");
+		retval = -ENODEV;
+	} else if (ictx->display_isopen) {
+		pr_err("display port is already open\n");
+		retval = -EBUSY;
+	} else {
+		ictx->display_isopen = true;
+		file->private_data = ictx;
+		dev_dbg(ictx->dev, "display port opened\n");
+	}
+
+	mutex_unlock(&ictx->lock);
+
+exit:
+	mutex_unlock(&driver_lock);
+	return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+	struct imon_context *ictx = NULL;
+	int retval = 0;
+
+	ictx = file->private_data;
+
+	if (!ictx) {
+		pr_err("no context for device\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->display_supported) {
+		pr_err("display not supported by device\n");
+		retval = -ENODEV;
+	} else if (!ictx->display_isopen) {
+		pr_err("display is not open\n");
+		retval = -EIO;
+	} else {
+		ictx->display_isopen = false;
+		dev_dbg(ictx->dev, "display port closed\n");
+		if (!ictx->dev_present_intf0) {
+			/*
+			 * Device disconnected before close and IR port is not
+			 * open. If IR port is open, context will be deleted by
+			 * ir_close.
+			 */
+			mutex_unlock(&ictx->lock);
+			free_imon_context(ictx);
+			return retval;
+		}
+	}
+
+	mutex_unlock(&ictx->lock);
+	return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with ictx->lock held.
+ */
+static int send_packet(struct imon_context *ictx)
+{
+	unsigned int pipe;
+	unsigned long timeout;
+	int interval = 0;
+	int retval = 0;
+	struct usb_ctrlrequest *control_req = NULL;
+
+	/* Check if we need to use control or interrupt urb */
+	if (!ictx->tx_control) {
+		pipe = usb_sndintpipe(ictx->usbdev_intf0,
+				      ictx->tx_endpoint->bEndpointAddress);
+		interval = ictx->tx_endpoint->bInterval;
+
+		usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
+				 ictx->usb_tx_buf,
+				 sizeof(ictx->usb_tx_buf),
+				 usb_tx_callback, ictx, interval);
+
+		ictx->tx_urb->actual_length = 0;
+	} else {
+		/* fill request into kmalloc'ed space: */
+		control_req = kmalloc(sizeof(struct usb_ctrlrequest),
+				      GFP_KERNEL);
+		if (control_req == NULL)
+			return -ENOMEM;
+
+		/* setup packet is '21 09 0200 0001 0008' */
+		control_req->bRequestType = 0x21;
+		control_req->bRequest = 0x09;
+		control_req->wValue = cpu_to_le16(0x0200);
+		control_req->wIndex = cpu_to_le16(0x0001);
+		control_req->wLength = cpu_to_le16(0x0008);
+
+		/* control pipe is endpoint 0x00 */
+		pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
+
+		/* build the control urb */
+		usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
+				     pipe, (unsigned char *)control_req,
+				     ictx->usb_tx_buf,
+				     sizeof(ictx->usb_tx_buf),
+				     usb_tx_callback, ictx);
+		ictx->tx_urb->actual_length = 0;
+	}
+
+	init_completion(&ictx->tx.finished);
+	ictx->tx.busy = true;
+	smp_rmb(); /* ensure later readers know we're busy */
+
+	retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
+	if (retval) {
+		ictx->tx.busy = false;
+		smp_rmb(); /* ensure later readers know we're not busy */
+		pr_err("error submitting urb(%d)\n", retval);
+	} else {
+		/* Wait for transmission to complete (or abort) */
+		mutex_unlock(&ictx->lock);
+		retval = wait_for_completion_interruptible(
+				&ictx->tx.finished);
+		if (retval)
+			pr_err("task interrupted\n");
+		mutex_lock(&ictx->lock);
+
+		retval = ictx->tx.status;
+		if (retval)
+			pr_err("packet tx failed (%d)\n", retval);
+	}
+
+	kfree(control_req);
+
+	/*
+	 * Induce a mandatory 5ms delay before returning, as otherwise,
+	 * send_packet can get called so rapidly as to overwhelm the device,
+	 * particularly on faster systems and/or those with quirky usb.
+	 */
+	timeout = msecs_to_jiffies(5);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(timeout);
+
+	return retval;
+}
+
+/**
+ * Sends an associate packet to the iMON 2.4G.
+ *
+ * This might not be such a good idea, since it has an id collision with
+ * some versions of the "IR & VFD" combo. The only way to determine if it
+ * is an RF version is to look at the product description string. (Which
+ * we currently do not fetch).
+ */
+static int send_associate_24g(struct imon_context *ictx)
+{
+	int retval;
+	const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
+					  0x00, 0x00, 0x00, 0x20 };
+
+	if (!ictx) {
+		pr_err("no context for device\n");
+		return -ENODEV;
+	}
+
+	if (!ictx->dev_present_intf0) {
+		pr_err("no iMON device present\n");
+		return -ENODEV;
+	}
+
+	memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
+	retval = send_packet(ictx);
+
+	return retval;
+}
+
+/**
+ * Sends packets to setup and show clock on iMON display
+ *
+ * Arguments: year - last 2 digits of year, month - 1..12,
+ * day - 1..31, dow - day of the week (0-Sun...6-Sat),
+ * hour - 0..23, minute - 0..59, second - 0..59
+ */
+static int send_set_imon_clock(struct imon_context *ictx,
+			       unsigned int year, unsigned int month,
+			       unsigned int day, unsigned int dow,
+			       unsigned int hour, unsigned int minute,
+			       unsigned int second)
+{
+	unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
+	int retval = 0;
+	int i;
+
+	if (!ictx) {
+		pr_err("no context for device\n");
+		return -ENODEV;
+	}
+
+	switch (ictx->display_type) {
+	case IMON_DISPLAY_TYPE_LCD:
+		clock_enable_pkt[0][0] = 0x80;
+		clock_enable_pkt[0][1] = year;
+		clock_enable_pkt[0][2] = month-1;
+		clock_enable_pkt[0][3] = day;
+		clock_enable_pkt[0][4] = hour;
+		clock_enable_pkt[0][5] = minute;
+		clock_enable_pkt[0][6] = second;
+
+		clock_enable_pkt[1][0] = 0x80;
+		clock_enable_pkt[1][1] = 0;
+		clock_enable_pkt[1][2] = 0;
+		clock_enable_pkt[1][3] = 0;
+		clock_enable_pkt[1][4] = 0;
+		clock_enable_pkt[1][5] = 0;
+		clock_enable_pkt[1][6] = 0;
+
+		if (ictx->product == 0xffdc) {
+			clock_enable_pkt[0][7] = 0x50;
+			clock_enable_pkt[1][7] = 0x51;
+		} else {
+			clock_enable_pkt[0][7] = 0x88;
+			clock_enable_pkt[1][7] = 0x8a;
+		}
+
+		break;
+
+	case IMON_DISPLAY_TYPE_VFD:
+		clock_enable_pkt[0][0] = year;
+		clock_enable_pkt[0][1] = month-1;
+		clock_enable_pkt[0][2] = day;
+		clock_enable_pkt[0][3] = dow;
+		clock_enable_pkt[0][4] = hour;
+		clock_enable_pkt[0][5] = minute;
+		clock_enable_pkt[0][6] = second;
+		clock_enable_pkt[0][7] = 0x40;
+
+		clock_enable_pkt[1][0] = 0;
+		clock_enable_pkt[1][1] = 0;
+		clock_enable_pkt[1][2] = 1;
+		clock_enable_pkt[1][3] = 0;
+		clock_enable_pkt[1][4] = 0;
+		clock_enable_pkt[1][5] = 0;
+		clock_enable_pkt[1][6] = 0;
+		clock_enable_pkt[1][7] = 0x42;
+
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
+		memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
+		retval = send_packet(ictx);
+		if (retval) {
+			pr_err("send_packet failed for packet %d\n", i);
+			break;
+		}
+	}
+
+	return retval;
+}
+
+/**
+ * These are the sysfs functions to handle the association on the iMON 2.4G LT.
+ */
+static ssize_t show_associate_remote(struct device *d,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct imon_context *ictx = dev_get_drvdata(d);
+
+	if (!ictx)
+		return -ENODEV;
+
+	mutex_lock(&ictx->lock);
+	if (ictx->rf_isassociating)
+		strcpy(buf, "associating\n");
+	else
+		strcpy(buf, "closed\n");
+
+	dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
+		 "instructions on how to associate your iMON 2.4G DT/LT "
+		 "remote\n");
+	mutex_unlock(&ictx->lock);
+	return strlen(buf);
+}
+
+static ssize_t store_associate_remote(struct device *d,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct imon_context *ictx;
+
+	ictx = dev_get_drvdata(d);
+
+	if (!ictx)
+		return -ENODEV;
+
+	mutex_lock(&ictx->lock);
+	ictx->rf_isassociating = true;
+	send_associate_24g(ictx);
+	mutex_unlock(&ictx->lock);
+
+	return count;
+}
+
+/**
+ * sysfs functions to control internal imon clock
+ */
+static ssize_t show_imon_clock(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct imon_context *ictx = dev_get_drvdata(d);
+	size_t len;
+
+	if (!ictx)
+		return -ENODEV;
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->display_supported) {
+		len = snprintf(buf, PAGE_SIZE, "Not supported.");
+	} else {
+		len = snprintf(buf, PAGE_SIZE,
+			"To set the clock on your iMON display:\n"
+			"# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
+			"%s", ictx->display_isopen ?
+			"\nNOTE: imon device must be closed\n" : "");
+	}
+
+	mutex_unlock(&ictx->lock);
+
+	return len;
+}
+
+static ssize_t store_imon_clock(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct imon_context *ictx = dev_get_drvdata(d);
+	ssize_t retval;
+	unsigned int year, month, day, dow, hour, minute, second;
+
+	if (!ictx)
+		return -ENODEV;
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->display_supported) {
+		retval = -ENODEV;
+		goto exit;
+	} else if (ictx->display_isopen) {
+		retval = -EBUSY;
+		goto exit;
+	}
+
+	if (sscanf(buf, "%u %u %u %u %u %u %u",	&year, &month, &day, &dow,
+		   &hour, &minute, &second) != 7) {
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if ((month < 1 || month > 12) ||
+	    (day < 1 || day > 31) || (dow > 6) ||
+	    (hour > 23) || (minute > 59) || (second > 59)) {
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	retval = send_set_imon_clock(ictx, year, month, day, dow,
+				     hour, minute, second);
+	if (retval)
+		goto exit;
+
+	retval = count;
+exit:
+	mutex_unlock(&ictx->lock);
+
+	return retval;
+}
+
+
+static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
+		   store_imon_clock);
+
+static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
+		   store_associate_remote);
+
+static struct attribute *imon_display_sysfs_entries[] = {
+	&dev_attr_imon_clock.attr,
+	NULL
+};
+
+static struct attribute_group imon_display_attr_group = {
+	.attrs = imon_display_sysfs_entries
+};
+
+static struct attribute *imon_rf_sysfs_entries[] = {
+	&dev_attr_associate_remote.attr,
+	NULL
+};
+
+static struct attribute_group imon_rf_attr_group = {
+	.attrs = imon_rf_sysfs_entries
+};
+
+/**
+ * Writes data to the VFD.  The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data.  If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos)
+{
+	int i;
+	int offset;
+	int seq;
+	int retval = 0;
+	struct imon_context *ictx;
+	const unsigned char vfd_packet6[] = {
+		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+
+	ictx = file->private_data;
+	if (!ictx) {
+		pr_err("no context for device\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->dev_present_intf0) {
+		pr_err("no iMON device present\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes <= 0 || n_bytes > 32) {
+		pr_err("invalid payload size\n");
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+
+	/* Pad with spaces */
+	for (i = n_bytes; i < 32; ++i)
+		ictx->tx.data_buf[i] = ' ';
+
+	for (i = 32; i < 35; ++i)
+		ictx->tx.data_buf[i] = 0xFF;
+
+	offset = 0;
+	seq = 0;
+
+	do {
+		memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
+		ictx->usb_tx_buf[7] = (unsigned char) seq;
+
+		retval = send_packet(ictx);
+		if (retval) {
+			pr_err("send packet failed for packet #%d\n", seq / 2);
+			goto exit;
+		} else {
+			seq += 2;
+			offset += 7;
+		}
+
+	} while (offset < 35);
+
+	/* Send packet #6 */
+	memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+	ictx->usb_tx_buf[7] = (unsigned char) seq;
+	retval = send_packet(ictx);
+	if (retval)
+		pr_err("send packet failed for packet #%d\n", seq / 2);
+
+exit:
+	mutex_unlock(&ictx->lock);
+
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Writes data to the LCD.  The iMON OEM LCD screen expects 8-byte
+ * packets. We accept data as 16 hexadecimal digits, followed by a
+ * newline (to make it easy to drive the device from a command-line
+ * -- even though the actual binary data is a bit complicated).
+ *
+ * The device itself is not a "traditional" text-mode display. It's
+ * actually a 16x96 pixel bitmap display. That means if you want to
+ * display text, you've got to have your own "font" and translate the
+ * text into bitmaps for display. This is really flexible (you can
+ * display whatever diacritics you need, and so on), but it's also
+ * a lot more complicated than most LCDs...
+ */
+static ssize_t lcd_write(struct file *file, const char *buf,
+			 size_t n_bytes, loff_t *pos)
+{
+	int retval = 0;
+	struct imon_context *ictx;
+
+	ictx = file->private_data;
+	if (!ictx) {
+		pr_err("no context for device\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&ictx->lock);
+
+	if (!ictx->display_supported) {
+		pr_err("no iMON display present\n");
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (n_bytes != 8) {
+		pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes);
+		retval = -EINVAL;
+		goto exit;
+	}
+
+	if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
+		retval = -EFAULT;
+		goto exit;
+	}
+
+	retval = send_packet(ictx);
+	if (retval) {
+		pr_err("send packet failed!\n");
+		goto exit;
+	} else {
+		dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
+			__func__, (int) n_bytes);
+	}
+exit:
+	mutex_unlock(&ictx->lock);
+	return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+	struct imon_context *ictx;
+
+	if (!urb)
+		return;
+	ictx = (struct imon_context *)urb->context;
+	if (!ictx)
+		return;
+
+	ictx->tx.status = urb->status;
+
+	/* notify waiters that write has finished */
+	ictx->tx.busy = false;
+	smp_rmb(); /* ensure later readers know we're not busy */
+	complete(&ictx->tx.finished);
+}
+
+/**
+ * report touchscreen input
+ */
+static void imon_touch_display_timeout(unsigned long data)
+{
+	struct imon_context *ictx = (struct imon_context *)data;
+
+	if (ictx->display_type != IMON_DISPLAY_TYPE_VGA)
+		return;
+
+	input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+	input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+	input_report_key(ictx->touch, BTN_TOUCH, 0x00);
+	input_sync(ictx->touch);
+}
+
+/**
+ * iMON IR receivers support two different signal sets -- those used by
+ * the iMON remotes, and those used by the Windows MCE remotes (which is
+ * really just RC-6), but only one or the other at a time, as the signals
+ * are decoded onboard the receiver.
+ */
+int imon_ir_change_protocol(void *priv, u64 ir_type)
+{
+	int retval;
+	struct imon_context *ictx = priv;
+	struct device *dev = ictx->dev;
+	bool pad_mouse;
+	unsigned char ir_proto_packet[] = {
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
+
+	if (ir_type && !(ir_type & ictx->props->allowed_protos))
+		dev_warn(dev, "Looks like you're trying to use an IR protocol "
+			 "this device does not support\n");
+
+	switch (ir_type) {
+	case IR_TYPE_RC6:
+		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
+		ir_proto_packet[0] = 0x01;
+		pad_mouse = false;
+		break;
+	case IR_TYPE_UNKNOWN:
+	case IR_TYPE_OTHER:
+		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
+		if (pad_stabilize && !nomouse)
+			pad_mouse = true;
+		else {
+			dev_dbg(dev, "PAD stabilize functionality disabled\n");
+			pad_mouse = false;
+		}
+		/* ir_proto_packet[0] = 0x00; // already the default */
+		ir_type = IR_TYPE_OTHER;
+		break;
+	default:
+		dev_warn(dev, "Unsupported IR protocol specified, overriding "
+			 "to iMON IR protocol\n");
+		if (pad_stabilize && !nomouse)
+			pad_mouse = true;
+		else {
+			dev_dbg(dev, "PAD stabilize functionality disabled\n");
+			pad_mouse = false;
+		}
+		/* ir_proto_packet[0] = 0x00; // already the default */
+		ir_type = IR_TYPE_OTHER;
+		break;
+	}
+
+	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
+
+	retval = send_packet(ictx);
+	if (retval)
+		goto out;
+
+	ictx->ir_type = ir_type;
+	ictx->pad_mouse = pad_mouse;
+
+out:
+	return retval;
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+	int usecs = 0;
+	int sec   = 0;
+
+	if (b->tv_usec > a->tv_usec) {
+		usecs = 1000000;
+		sec--;
+	}
+
+	usecs += a->tv_usec - b->tv_usec;
+
+	sec += a->tv_sec - b->tv_sec;
+	sec *= 1000;
+	usecs /= 1000;
+	sec += usecs;
+
+	if (sec < 0)
+		sec = 1000;
+
+	return sec;
+}
+
+/**
+ * The directional pad behaves a bit differently, depending on whether this is
+ * one of the older ffdc devices or a newer device. Newer devices appear to
+ * have a higher resolution matrix for more precise mouse movement, but it
+ * makes things overly sensitive in keyboard mode, so we do some interesting
+ * contortions to make it less touchy. Older devices run through the same
+ * routine with shorter timeout and a smaller threshold.
+ */
+static int stabilize(int a, int b, u16 timeout, u16 threshold)
+{
+	struct timeval ct;
+	static struct timeval prev_time = {0, 0};
+	static struct timeval hit_time  = {0, 0};
+	static int x, y, prev_result, hits;
+	int result = 0;
+	int msec, msec_hit;
+
+	do_gettimeofday(&ct);
+	msec = tv2int(&ct, &prev_time);
+	msec_hit = tv2int(&ct, &hit_time);
+
+	if (msec > 100) {
+		x = 0;
+		y = 0;
+		hits = 0;
+	}
+
+	x += a;
+	y += b;
+
+	prev_time = ct;
+
+	if (abs(x) > threshold || abs(y) > threshold) {
+		if (abs(y) > abs(x))
+			result = (y > 0) ? 0x7F : 0x80;
+		else
+			result = (x > 0) ? 0x7F00 : 0x8000;
+
+		x = 0;
+		y = 0;
+
+		if (result == prev_result) {
+			hits++;
+
+			if (hits > 3) {
+				switch (result) {
+				case 0x7F:
+					y = 17 * threshold / 30;
+					break;
+				case 0x80:
+					y -= 17 * threshold / 30;
+					break;
+				case 0x7F00:
+					x = 17 * threshold / 30;
+					break;
+				case 0x8000:
+					x -= 17 * threshold / 30;
+					break;
+				}
+			}
+
+			if (hits == 2 && msec_hit < timeout) {
+				result = 0;
+				hits = 1;
+			}
+		} else {
+			prev_result = result;
+			hits = 1;
+			hit_time = ct;
+		}
+	}
+
+	return result;
+}
+
+static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
+{
+	u32 keycode;
+	u32 release;
+	bool is_release_code = false;
+
+	/* Look for the initial press of a button */
+	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	ictx->rc_toggle = 0x0;
+	ictx->rc_scancode = scancode;
+
+	/* Look for the release of a button */
+	if (keycode == KEY_RESERVED) {
+		release = scancode & ~0x4000;
+		keycode = ir_g_keycode_from_table(ictx->rdev, release);
+		if (keycode != KEY_RESERVED)
+			is_release_code = true;
+	}
+
+	ictx->release_code = is_release_code;
+
+	return keycode;
+}
+
+static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
+{
+	u32 keycode;
+
+#define MCE_KEY_MASK 0x7000
+#define MCE_TOGGLE_BIT 0x8000
+
+	/*
+	 * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx
+	 * (the toggle bit flipping between alternating key presses), while
+	 * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep
+	 * the table trim, we always or in the bits to look up 0x8000ff4xx,
+	 * but we can't or them into all codes, as some keys are decoded in
+	 * a different way w/o the same use of the toggle bit...
+	 */
+	if (scancode & 0x80000000)
+		scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
+
+	ictx->rc_scancode = scancode;
+	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+
+	/* not used in mce mode, but make sure we know its false */
+	ictx->release_code = false;
+
+	return keycode;
+}
+
+static u32 imon_panel_key_lookup(u64 code)
+{
+	int i;
+	u32 keycode = KEY_RESERVED;
+
+	for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+		if (imon_panel_key_table[i].hw_code == (code | 0xffee)) {
+			keycode = imon_panel_key_table[i].keycode;
+			break;
+		}
+	}
+
+	return keycode;
+}
+
+static bool imon_mouse_event(struct imon_context *ictx,
+			     unsigned char *buf, int len)
+{
+	char rel_x = 0x00, rel_y = 0x00;
+	u8 right_shift = 1;
+	bool mouse_input = true;
+	int dir = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ictx->kc_lock, flags);
+
+	/* newer iMON device PAD or mouse button */
+	if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
+		rel_x = buf[2];
+		rel_y = buf[3];
+		right_shift = 1;
+	/* 0xffdc iMON PAD or mouse button input */
+	} else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
+			!((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
+		rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+			(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+		if (buf[0] & 0x02)
+			rel_x |= ~0x0f;
+		rel_x = rel_x + rel_x / 2;
+		rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+			(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+		if (buf[0] & 0x01)
+			rel_y |= ~0x0f;
+		rel_y = rel_y + rel_y / 2;
+		right_shift = 2;
+	/* some ffdc devices decode mouse buttons differently... */
+	} else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
+		right_shift = 2;
+	/* ch+/- buttons, which we use for an emulated scroll wheel */
+	} else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
+		dir = 1;
+	} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
+		dir = -1;
+	} else
+		mouse_input = false;
+
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+	if (mouse_input) {
+		dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
+
+		if (dir) {
+			input_report_rel(ictx->idev, REL_WHEEL, dir);
+		} else if (rel_x || rel_y) {
+			input_report_rel(ictx->idev, REL_X, rel_x);
+			input_report_rel(ictx->idev, REL_Y, rel_y);
+		} else {
+			input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
+			input_report_key(ictx->idev, BTN_RIGHT,
+					 buf[1] >> right_shift & 0x1);
+		}
+		input_sync(ictx->idev);
+		spin_lock_irqsave(&ictx->kc_lock, flags);
+		ictx->last_keycode = ictx->kc;
+		spin_unlock_irqrestore(&ictx->kc_lock, flags);
+	}
+
+	return mouse_input;
+}
+
+static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
+{
+	mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
+	ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
+	ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
+	input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+	input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+	input_report_key(ictx->touch, BTN_TOUCH, 0x01);
+	input_sync(ictx->touch);
+}
+
+static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
+{
+	int dir = 0;
+	char rel_x = 0x00, rel_y = 0x00;
+	u16 timeout, threshold;
+	u32 scancode = KEY_RESERVED;
+	unsigned long flags;
+
+	/*
+	 * The imon directional pad functions more like a touchpad. Bytes 3 & 4
+	 * contain a position coordinate (x,y), with each component ranging
+	 * from -14 to 14. We want to down-sample this to only 4 discrete values
+	 * for up/down/left/right arrow keys. Also, when you get too close to
+	 * diagonals, it has a tendancy to jump back and forth, so lets try to
+	 * ignore when they get too close.
+	 */
+	if (ictx->product != 0xffdc) {
+		/* first, pad to 8 bytes so it conforms with everything else */
+		buf[5] = buf[6] = buf[7] = 0;
+		timeout = 500;	/* in msecs */
+		/* (2*threshold) x (2*threshold) square */
+		threshold = pad_thresh ? pad_thresh : 28;
+		rel_x = buf[2];
+		rel_y = buf[3];
+
+		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
+				dir = stabilize((int)rel_x, (int)rel_y,
+						timeout, threshold);
+				if (!dir) {
+					spin_lock_irqsave(&ictx->kc_lock,
+							  flags);
+					ictx->kc = KEY_UNKNOWN;
+					spin_unlock_irqrestore(&ictx->kc_lock,
+							       flags);
+					return;
+				}
+				buf[2] = dir & 0xFF;
+				buf[3] = (dir >> 8) & 0xFF;
+				scancode = be32_to_cpu(*((u32 *)buf));
+			}
+		} else {
+			/*
+			 * Hack alert: instead of using keycodes, we have
+			 * to use hard-coded scancodes here...
+			 */
+			if (abs(rel_y) > abs(rel_x)) {
+				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+				buf[3] = 0;
+				if (rel_y > 0)
+					scancode = 0x01007f00; /* KEY_DOWN */
+				else
+					scancode = 0x01008000; /* KEY_UP */
+			} else {
+				buf[2] = 0;
+				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+				if (rel_x > 0)
+					scancode = 0x0100007f; /* KEY_RIGHT */
+				else
+					scancode = 0x01000080; /* KEY_LEFT */
+			}
+		}
+
+	/*
+	 * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
+	 * device (15c2:ffdc). The remote generates various codes from
+	 * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
+	 * 0x688301b7 and the right one 0x688481b7. All other keys generate
+	 * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
+	 * reversed endianess. Extract direction from buffer, rotate endianess,
+	 * adjust sign and feed the values into stabilize(). The resulting codes
+	 * will be 0x01008000, 0x01007F00, which match the newer devices.
+	 */
+	} else {
+		timeout = 10;	/* in msecs */
+		/* (2*threshold) x (2*threshold) square */
+		threshold = pad_thresh ? pad_thresh : 15;
+
+		/* buf[1] is x */
+		rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+			(buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+		if (buf[0] & 0x02)
+			rel_x |= ~0x10+1;
+		/* buf[2] is y */
+		rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+			(buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+		if (buf[0] & 0x01)
+			rel_y |= ~0x10+1;
+
+		buf[0] = 0x01;
+		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
+
+		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+			dir = stabilize((int)rel_x, (int)rel_y,
+					timeout, threshold);
+			if (!dir) {
+				spin_lock_irqsave(&ictx->kc_lock, flags);
+				ictx->kc = KEY_UNKNOWN;
+				spin_unlock_irqrestore(&ictx->kc_lock, flags);
+				return;
+			}
+			buf[2] = dir & 0xFF;
+			buf[3] = (dir >> 8) & 0xFF;
+			scancode = be32_to_cpu(*((u32 *)buf));
+		} else {
+			/*
+			 * Hack alert: instead of using keycodes, we have
+			 * to use hard-coded scancodes here...
+			 */
+			if (abs(rel_y) > abs(rel_x)) {
+				buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+				buf[3] = 0;
+				if (rel_y > 0)
+					scancode = 0x01007f00; /* KEY_DOWN */
+				else
+					scancode = 0x01008000; /* KEY_UP */
+			} else {
+				buf[2] = 0;
+				buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+				if (rel_x > 0)
+					scancode = 0x0100007f; /* KEY_RIGHT */
+				else
+					scancode = 0x01000080; /* KEY_LEFT */
+			}
+		}
+	}
+
+	if (scancode) {
+		spin_lock_irqsave(&ictx->kc_lock, flags);
+		ictx->kc = imon_remote_key_lookup(ictx, scancode);
+		spin_unlock_irqrestore(&ictx->kc_lock, flags);
+	}
+}
+
+/**
+ * figure out if these is a press or a release. We don't actually
+ * care about repeats, as those will be auto-generated within the IR
+ * subsystem for repeating scancodes.
+ */
+static int imon_parse_press_type(struct imon_context *ictx,
+				 unsigned char *buf, u8 ktype)
+{
+	int press_type = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ictx->kc_lock, flags);
+
+	/* key release of 0x02XXXXXX key */
+	if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00)
+		ictx->kc = ictx->last_keycode;
+
+	/* mouse button release on (some) 0xffdc devices */
+	else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 &&
+		 buf[2] == 0x81 && buf[3] == 0xb7)
+		ictx->kc = ictx->last_keycode;
+
+	/* mouse button release on (some other) 0xffdc devices */
+	else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 &&
+		 buf[2] == 0x81 && buf[3] == 0xb7)
+		ictx->kc = ictx->last_keycode;
+
+	/* mce-specific button handling, no keyup events */
+	else if (ktype == IMON_KEY_MCE) {
+		ictx->rc_toggle = buf[2];
+		press_type = 1;
+
+	/* incoherent or irrelevant data */
+	} else if (ictx->kc == KEY_RESERVED)
+		press_type = -EINVAL;
+
+	/* key release of 0xXXXXXXb7 key */
+	else if (ictx->release_code)
+		press_type = 0;
+
+	/* this is a button press */
+	else
+		press_type = 1;
+
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+	return press_type;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *ictx,
+				 struct urb *urb, int intf)
+{
+	int len = urb->actual_length;
+	unsigned char *buf = urb->transfer_buffer;
+	struct device *dev = ictx->dev;
+	unsigned long flags;
+	u32 kc;
+	bool norelease = false;
+	int i;
+	u64 scancode;
+	int press_type = 0;
+	int msec;
+	struct timeval t;
+	static struct timeval prev_time = { 0, 0 };
+	u8 ktype;
+
+	/* filter out junk data on the older 0xffdc imon devices */
+	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
+		return;
+
+	/* Figure out what key was pressed */
+	if (len == 8 && buf[7] == 0xee) {
+		scancode = be64_to_cpu(*((u64 *)buf));
+		ktype = IMON_KEY_PANEL;
+		kc = imon_panel_key_lookup(scancode);
+	} else {
+		scancode = be32_to_cpu(*((u32 *)buf));
+		if (ictx->ir_type == IR_TYPE_RC6) {
+			ktype = IMON_KEY_IMON;
+			if (buf[0] == 0x80)
+				ktype = IMON_KEY_MCE;
+			kc = imon_mce_key_lookup(ictx, scancode);
+		} else {
+			ktype = IMON_KEY_IMON;
+			kc = imon_remote_key_lookup(ictx, scancode);
+		}
+	}
+
+	spin_lock_irqsave(&ictx->kc_lock, flags);
+	/* keyboard/mouse mode toggle button */
+	if (kc == KEY_KEYBOARD && !ictx->release_code) {
+		ictx->last_keycode = kc;
+		if (!nomouse) {
+			ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
+			dev_dbg(dev, "toggling to %s mode\n",
+				ictx->pad_mouse ? "mouse" : "keyboard");
+			spin_unlock_irqrestore(&ictx->kc_lock, flags);
+			return;
+		} else {
+			ictx->pad_mouse = 0;
+			dev_dbg(dev, "mouse mode disabled, passing key value\n");
+		}
+	}
+
+	ictx->kc = kc;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+	/* send touchscreen events through input subsystem if touchpad data */
+	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
+	    buf[7] == 0x86) {
+		imon_touch_event(ictx, buf);
+		return;
+
+	/* look for mouse events with pad in mouse mode */
+	} else if (ictx->pad_mouse) {
+		if (imon_mouse_event(ictx, buf, len))
+			return;
+	}
+
+	/* Now for some special handling to convert pad input to arrow keys */
+	if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
+	    ((len == 8) && (buf[0] & 0x40) &&
+	     !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
+		len = 8;
+		imon_pad_to_keys(ictx, buf);
+		norelease = true;
+	}
+
+	if (debug) {
+		printk(KERN_INFO "intf%d decoded packet: ", intf);
+		for (i = 0; i < len; ++i)
+			printk("%02x ", buf[i]);
+		printk("\n");
+	}
+
+	press_type = imon_parse_press_type(ictx, buf, ktype);
+	if (press_type < 0)
+		goto not_input_data;
+
+	spin_lock_irqsave(&ictx->kc_lock, flags);
+	if (ictx->kc == KEY_UNKNOWN)
+		goto unknown_key;
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+	if (ktype != IMON_KEY_PANEL) {
+		if (press_type == 0)
+			ir_keyup(ictx->rdev);
+		else {
+			ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+			spin_lock_irqsave(&ictx->kc_lock, flags);
+			ictx->last_keycode = ictx->kc;
+			spin_unlock_irqrestore(&ictx->kc_lock, flags);
+		}
+		return;
+	}
+
+	/* Only panel type events left to process now */
+	spin_lock_irqsave(&ictx->kc_lock, flags);
+
+	/* KEY_MUTE repeats from knob need to be suppressed */
+	if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
+		do_gettimeofday(&t);
+		msec = tv2int(&t, &prev_time);
+		prev_time = t;
+		if (msec < ictx->idev->rep[REP_DELAY]) {
+			spin_unlock_irqrestore(&ictx->kc_lock, flags);
+			return;
+		}
+	}
+	kc = ictx->kc;
+
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+	input_report_key(ictx->idev, kc, press_type);
+	input_sync(ictx->idev);
+
+	/* panel keys don't generate a release */
+	input_report_key(ictx->idev, kc, 0);
+	input_sync(ictx->idev);
+
+	ictx->last_keycode = kc;
+
+	return;
+
+unknown_key:
+	spin_unlock_irqrestore(&ictx->kc_lock, flags);
+	dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__,
+		 (long long)scancode);
+	return;
+
+not_input_data:
+	if (len != 8) {
+		dev_warn(dev, "imon %s: invalid incoming packet "
+			 "size (len = %d, intf%d)\n", __func__, len, intf);
+		return;
+	}
+
+	/* iMON 2.4G associate frame */
+	if (buf[0] == 0x00 &&
+	    buf[2] == 0xFF &&				/* REFID */
+	    buf[3] == 0xFF &&
+	    buf[4] == 0xFF &&
+	    buf[5] == 0xFF &&				/* iMON 2.4G */
+	   ((buf[6] == 0x4E && buf[7] == 0xDF) ||	/* LT */
+	    (buf[6] == 0x5E && buf[7] == 0xDF))) {	/* DT */
+		dev_warn(dev, "%s: remote associated refid=%02X\n",
+			 __func__, buf[1]);
+		ictx->rf_isassociating = false;
+	}
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback_intf0(struct urb *urb)
+{
+	struct imon_context *ictx;
+	int intfnum = 0;
+
+	if (!urb)
+		return;
+
+	ictx = (struct imon_context *)urb->context;
+	if (!ictx)
+		return;
+
+	switch (urb->status) {
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case -ESHUTDOWN:	/* transport endpoint was shut down */
+		break;
+
+	case 0:
+		imon_incoming_packet(ictx, urb, intfnum);
+		break;
+
+	default:
+		dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+}
+
+static void usb_rx_callback_intf1(struct urb *urb)
+{
+	struct imon_context *ictx;
+	int intfnum = 1;
+
+	if (!urb)
+		return;
+
+	ictx = (struct imon_context *)urb->context;
+	if (!ictx)
+		return;
+
+	switch (urb->status) {
+	case -ENOENT:		/* usbcore unlink successful! */
+		return;
+
+	case -ESHUTDOWN:	/* transport endpoint was shut down */
+		break;
+
+	case 0:
+		imon_incoming_packet(ictx, urb, intfnum);
+		break;
+
+	default:
+		dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+			 __func__, urb->status);
+		break;
+	}
+
+	usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+}
+
+/*
+ * The 0x15c2:0xffdc device ID was used for umpteen different imon
+ * devices, and all of them constantly spew interrupts, even when there
+ * is no actual data to report. However, byte 6 of this buffer looks like
+ * its unique across device variants, so we're trying to key off that to
+ * figure out which display type (if any) and what IR protocol the device
+ * actually supports. These devices have their IR protocol hard-coded into
+ * their firmware, they can't be changed on the fly like the newer hardware.
+ */
+static void imon_get_ffdc_type(struct imon_context *ictx)
+{
+	u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
+	u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
+	u64 allowed_protos = IR_TYPE_OTHER;
+
+	switch (ffdc_cfg_byte) {
+	/* iMON Knob, no display, iMON IR + vol knob */
+	case 0x21:
+		dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
+		ictx->display_supported = false;
+		break;
+	/* iMON 2.4G LT (usb stick), no display, iMON RF */
+	case 0x4e:
+		dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
+		ictx->display_supported = false;
+		ictx->rf_device = true;
+		break;
+	/* iMON VFD, no IR (does have vol knob tho) */
+	case 0x35:
+		dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
+		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		break;
+	/* iMON VFD, iMON IR */
+	case 0x24:
+	case 0x85:
+		dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR");
+		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		break;
+	/* iMON VFD, MCE IR */
+	case 0x9e:
+		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
+		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		allowed_protos = IR_TYPE_RC6;
+		break;
+	/* iMON LCD, MCE IR */
+	case 0x9f:
+		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
+		detected_display_type = IMON_DISPLAY_TYPE_LCD;
+		allowed_protos = IR_TYPE_RC6;
+		break;
+	default:
+		dev_info(ictx->dev, "Unknown 0xffdc device, "
+			 "defaulting to VFD and iMON IR");
+		detected_display_type = IMON_DISPLAY_TYPE_VFD;
+		break;
+	}
+
+	printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
+
+	ictx->display_type = detected_display_type;
+	ictx->props->allowed_protos = allowed_protos;
+	ictx->ir_type = allowed_protos;
+}
+
+static void imon_set_display_type(struct imon_context *ictx)
+{
+	u8 configured_display_type = IMON_DISPLAY_TYPE_VFD;
+
+	/*
+	 * Try to auto-detect the type of display if the user hasn't set
+	 * it by hand via the display_type modparam. Default is VFD.
+	 */
+
+	if (display_type == IMON_DISPLAY_TYPE_AUTO) {
+		switch (ictx->product) {
+		case 0xffdc:
+			/* set in imon_get_ffdc_type() */
+			configured_display_type = ictx->display_type;
+			break;
+		case 0x0034:
+		case 0x0035:
+			configured_display_type = IMON_DISPLAY_TYPE_VGA;
+			break;
+		case 0x0038:
+		case 0x0039:
+		case 0x0045:
+			configured_display_type = IMON_DISPLAY_TYPE_LCD;
+			break;
+		case 0x003c:
+		case 0x0041:
+		case 0x0042:
+		case 0x0043:
+			configured_display_type = IMON_DISPLAY_TYPE_NONE;
+			ictx->display_supported = false;
+			break;
+		case 0x0036:
+		case 0x0044:
+		default:
+			configured_display_type = IMON_DISPLAY_TYPE_VFD;
+			break;
+		}
+	} else {
+		configured_display_type = display_type;
+		if (display_type == IMON_DISPLAY_TYPE_NONE)
+			ictx->display_supported = false;
+		else
+			ictx->display_supported = true;
+		dev_info(ictx->dev, "%s: overriding display type to %d via "
+			 "modparam\n", __func__, display_type);
+	}
+
+	ictx->display_type = configured_display_type;
+}
+
+static struct input_dev *imon_init_rdev(struct imon_context *ictx)
+{
+	struct input_dev *rdev;
+	struct ir_dev_props *props;
+	int ret;
+	char *ir_codes = NULL;
+	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
+					    0x00, 0x00, 0x00, 0x88 };
+
+	rdev = input_allocate_device();
+	props = kzalloc(sizeof(*props), GFP_KERNEL);
+	if (!rdev || !props) {
+		dev_err(ictx->dev, "remote control dev allocation failed\n");
+		goto out;
+	}
+
+	snprintf(ictx->name_rdev, sizeof(ictx->name_rdev),
+		 "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
+	usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev,
+		      sizeof(ictx->phys_rdev));
+	strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
+
+	rdev->name = ictx->name_rdev;
+	rdev->phys = ictx->phys_rdev;
+	usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
+	rdev->dev.parent = ictx->dev;
+	rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_set_drvdata(rdev, ictx);
+
+	props->priv = ictx;
+	props->driver_type = RC_DRIVER_SCANCODE;
+	props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
+	props->change_protocol = imon_ir_change_protocol;
+	ictx->props = props;
+
+	/* Enable front-panel buttons and/or knobs */
+	memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
+	ret = send_packet(ictx);
+	/* Not fatal, but warn about it */
+	if (ret)
+		dev_info(ictx->dev, "panel buttons/knobs setup failed\n");
+
+	if (ictx->product == 0xffdc)
+		imon_get_ffdc_type(ictx);
+
+	imon_set_display_type(ictx);
+
+	if (ictx->ir_type == IR_TYPE_RC6)
+		ir_codes = RC_MAP_IMON_MCE;
+	else
+		ir_codes = RC_MAP_IMON_PAD;
+
+	ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
+	if (ret < 0) {
+		dev_err(ictx->dev, "remote input dev register failed\n");
+		goto out;
+	}
+
+	return rdev;
+
+out:
+	kfree(props);
+	input_free_device(rdev);
+	return NULL;
+}
+
+static struct input_dev *imon_init_idev(struct imon_context *ictx)
+{
+	struct input_dev *idev;
+	int ret, i;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(ictx->dev, "input dev allocation failed\n");
+		goto out;
+	}
+
+	snprintf(ictx->name_idev, sizeof(ictx->name_idev),
+		 "iMON Panel, Knob and Mouse(%04x:%04x)",
+		 ictx->vendor, ictx->product);
+	idev->name = ictx->name_idev;
+
+	usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
+		      sizeof(ictx->phys_idev));
+	strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev));
+	idev->phys = ictx->phys_idev;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
+
+	idev->keybit[BIT_WORD(BTN_MOUSE)] =
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+	idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
+		BIT_MASK(REL_WHEEL);
+
+	/* panel and/or knob code support */
+	for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+		u32 kc = imon_panel_key_table[i].keycode;
+		__set_bit(kc, idev->keybit);
+	}
+
+	usb_to_input_id(ictx->usbdev_intf0, &idev->id);
+	idev->dev.parent = ictx->dev;
+	input_set_drvdata(idev, ictx);
+
+	ret = input_register_device(idev);
+	if (ret < 0) {
+		dev_err(ictx->dev, "input dev register failed\n");
+		goto out;
+	}
+
+	return idev;
+
+out:
+	input_free_device(idev);
+	return NULL;
+}
+
+static struct input_dev *imon_init_touch(struct imon_context *ictx)
+{
+	struct input_dev *touch;
+	int ret;
+
+	touch = input_allocate_device();
+	if (!touch) {
+		dev_err(ictx->dev, "touchscreen input dev allocation failed\n");
+		goto touch_alloc_failed;
+	}
+
+	snprintf(ictx->name_touch, sizeof(ictx->name_touch),
+		 "iMON USB Touchscreen (%04x:%04x)",
+		 ictx->vendor, ictx->product);
+	touch->name = ictx->name_touch;
+
+	usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
+		      sizeof(ictx->phys_touch));
+	strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch));
+	touch->phys = ictx->phys_touch;
+
+	touch->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	touch->keybit[BIT_WORD(BTN_TOUCH)] =
+		BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(touch, ABS_X,
+			     0x00, 0xfff, 0, 0);
+	input_set_abs_params(touch, ABS_Y,
+			     0x00, 0xfff, 0, 0);
+
+	input_set_drvdata(touch, ictx);
+
+	usb_to_input_id(ictx->usbdev_intf1, &touch->id);
+	touch->dev.parent = ictx->dev;
+	ret = input_register_device(touch);
+	if (ret <  0) {
+		dev_info(ictx->dev, "touchscreen input dev register failed\n");
+		goto touch_register_failed;
+	}
+
+	return touch;
+
+touch_register_failed:
+	input_free_device(ictx->touch);
+
+touch_alloc_failed:
+	return NULL;
+}
+
+static bool imon_find_endpoints(struct imon_context *ictx,
+				struct usb_host_interface *iface_desc)
+{
+	struct usb_endpoint_descriptor *ep;
+	struct usb_endpoint_descriptor *rx_endpoint = NULL;
+	struct usb_endpoint_descriptor *tx_endpoint = NULL;
+	int ifnum = iface_desc->desc.bInterfaceNumber;
+	int num_endpts = iface_desc->desc.bNumEndpoints;
+	int i, ep_dir, ep_type;
+	bool ir_ep_found = false;
+	bool display_ep_found = false;
+	bool tx_control = false;
+
+	/*
+	 * Scan the endpoint list and set:
+	 *	first input endpoint = IR endpoint
+	 *	first output endpoint = display endpoint
+	 */
+	for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+		ep = &iface_desc->endpoint[i].desc;
+		ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+		ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+		if (!ir_ep_found && ep_dir == USB_DIR_IN &&
+		    ep_type == USB_ENDPOINT_XFER_INT) {
+
+			rx_endpoint = ep;
+			ir_ep_found = true;
+			dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
+
+		} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
+			   ep_type == USB_ENDPOINT_XFER_INT) {
+			tx_endpoint = ep;
+			display_ep_found = true;
+			dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
+		}
+	}
+
+	if (ifnum == 0) {
+		ictx->rx_endpoint_intf0 = rx_endpoint;
+		/*
+		 * tx is used to send characters to lcd/vfd, associate RF
+		 * remotes, set IR protocol, and maybe more...
+		 */
+		ictx->tx_endpoint = tx_endpoint;
+	} else {
+		ictx->rx_endpoint_intf1 = rx_endpoint;
+	}
+
+	/*
+	 * If we didn't find a display endpoint, this is probably one of the
+	 * newer iMON devices that use control urb instead of interrupt
+	 */
+	if (!display_ep_found) {
+		tx_control = true;
+		display_ep_found = true;
+		dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
+			"interface OUT endpoint\n", __func__);
+	}
+
+	/*
+	 * Some iMON receivers have no display. Unfortunately, it seems
+	 * that SoundGraph recycles device IDs between devices both with
+	 * and without... :\
+	 */
+	if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
+		display_ep_found = false;
+		dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
+	}
+
+	/*
+	 * iMON Touch devices have a VGA touchscreen, but no "display", as
+	 * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
+	 */
+	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+		display_ep_found = false;
+		dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
+	}
+
+	/* Input endpoint is mandatory */
+	if (!ir_ep_found)
+		pr_err("no valid input (IR) endpoint found\n");
+
+	ictx->tx_control = tx_control;
+
+	if (display_ep_found)
+		ictx->display_supported = true;
+
+	return ir_ep_found;
+
+}
+
+static struct imon_context *imon_init_intf0(struct usb_interface *intf)
+{
+	struct imon_context *ictx;
+	struct urb *rx_urb;
+	struct urb *tx_urb;
+	struct device *dev = &intf->dev;
+	struct usb_host_interface *iface_desc;
+	int ret = -ENOMEM;
+
+	ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+	if (!ictx) {
+		dev_err(dev, "%s: kzalloc failed for context", __func__);
+		goto exit;
+	}
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!rx_urb) {
+		dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
+		goto rx_urb_alloc_failed;
+	}
+	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tx_urb) {
+		dev_err(dev, "%s: usb_alloc_urb failed for display urb",
+			__func__);
+		goto tx_urb_alloc_failed;
+	}
+
+	mutex_init(&ictx->lock);
+	spin_lock_init(&ictx->kc_lock);
+
+	mutex_lock(&ictx->lock);
+
+	ictx->dev = dev;
+	ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
+	ictx->dev_present_intf0 = true;
+	ictx->rx_urb_intf0 = rx_urb;
+	ictx->tx_urb = tx_urb;
+	ictx->rf_device = false;
+
+	ictx->vendor  = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
+	ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
+
+	ret = -ENODEV;
+	iface_desc = intf->cur_altsetting;
+	if (!imon_find_endpoints(ictx, iface_desc)) {
+		goto find_endpoint_failed;
+	}
+
+	ictx->idev = imon_init_idev(ictx);
+	if (!ictx->idev) {
+		dev_err(dev, "%s: input device setup failed\n", __func__);
+		goto idev_setup_failed;
+	}
+
+	ictx->rdev = imon_init_rdev(ictx);
+	if (!ictx->rdev) {
+		dev_err(dev, "%s: rc device setup failed\n", __func__);
+		goto rdev_setup_failed;
+	}
+
+	usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+		usb_rcvintpipe(ictx->usbdev_intf0,
+			ictx->rx_endpoint_intf0->bEndpointAddress),
+		ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+		usb_rx_callback_intf0, ictx,
+		ictx->rx_endpoint_intf0->bInterval);
+
+	ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
+	if (ret) {
+		pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);
+		goto urb_submit_failed;
+	}
+
+	return ictx;
+
+urb_submit_failed:
+	ir_input_unregister(ictx->rdev);
+rdev_setup_failed:
+	input_unregister_device(ictx->idev);
+idev_setup_failed:
+find_endpoint_failed:
+	mutex_unlock(&ictx->lock);
+	usb_free_urb(tx_urb);
+tx_urb_alloc_failed:
+	usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+	kfree(ictx);
+exit:
+	dev_err(dev, "unable to initialize intf0, err %d\n", ret);
+
+	return NULL;
+}
+
+static struct imon_context *imon_init_intf1(struct usb_interface *intf,
+					    struct imon_context *ictx)
+{
+	struct urb *rx_urb;
+	struct usb_host_interface *iface_desc;
+	int ret = -ENOMEM;
+
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!rx_urb) {
+		pr_err("usb_alloc_urb failed for IR urb\n");
+		goto rx_urb_alloc_failed;
+	}
+
+	mutex_lock(&ictx->lock);
+
+	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+		init_timer(&ictx->ttimer);
+		ictx->ttimer.data = (unsigned long)ictx;
+		ictx->ttimer.function = imon_touch_display_timeout;
+	}
+
+	ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
+	ictx->dev_present_intf1 = true;
+	ictx->rx_urb_intf1 = rx_urb;
+
+	ret = -ENODEV;
+	iface_desc = intf->cur_altsetting;
+	if (!imon_find_endpoints(ictx, iface_desc))
+		goto find_endpoint_failed;
+
+	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+		ictx->touch = imon_init_touch(ictx);
+		if (!ictx->touch)
+			goto touch_setup_failed;
+	} else
+		ictx->touch = NULL;
+
+	usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+		usb_rcvintpipe(ictx->usbdev_intf1,
+			ictx->rx_endpoint_intf1->bEndpointAddress),
+		ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+		usb_rx_callback_intf1, ictx,
+		ictx->rx_endpoint_intf1->bInterval);
+
+	ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
+
+	if (ret) {
+		pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);
+		goto urb_submit_failed;
+	}
+
+	return ictx;
+
+urb_submit_failed:
+	if (ictx->touch)
+		input_unregister_device(ictx->touch);
+touch_setup_failed:
+find_endpoint_failed:
+	mutex_unlock(&ictx->lock);
+	usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+	dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+
+	return NULL;
+}
+
+static void imon_init_display(struct imon_context *ictx,
+			      struct usb_interface *intf)
+{
+	int ret;
+
+	dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
+
+	/* set up sysfs entry for built-in clock */
+	ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
+	if (ret)
+		dev_err(ictx->dev, "Could not create display sysfs "
+			"entries(%d)", ret);
+
+	if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+		ret = usb_register_dev(intf, &imon_lcd_class);
+	else
+		ret = usb_register_dev(intf, &imon_vfd_class);
+	if (ret)
+		/* Not a fatal error, so ignore */
+		dev_info(ictx->dev, "could not get a minor number for "
+			 "display\n");
+
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int __devinit imon_probe(struct usb_interface *interface,
+				const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = NULL;
+	struct usb_host_interface *iface_desc = NULL;
+	struct usb_interface *first_if;
+	struct device *dev = &interface->dev;
+	int ifnum, code_length, sysfs_err;
+	int ret = 0;
+	struct imon_context *ictx = NULL;
+	struct imon_context *first_if_ctx = NULL;
+	u16 vendor, product;
+
+	code_length = BUF_CHUNK_SIZE * 8;
+
+	usbdev     = usb_get_dev(interface_to_usbdev(interface));
+	iface_desc = interface->cur_altsetting;
+	ifnum      = iface_desc->desc.bInterfaceNumber;
+	vendor     = le16_to_cpu(usbdev->descriptor.idVendor);
+	product    = le16_to_cpu(usbdev->descriptor.idProduct);
+
+	dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+		__func__, vendor, product, ifnum);
+
+	/* prevent races probing devices w/multiple interfaces */
+	mutex_lock(&driver_lock);
+
+	first_if = usb_ifnum_to_if(usbdev, 0);
+	first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
+
+	if (ifnum == 0) {
+		ictx = imon_init_intf0(interface);
+		if (!ictx) {
+			pr_err("failed to initialize context!\n");
+			ret = -ENODEV;
+			goto fail;
+		}
+
+	} else {
+	/* this is the secondary interface on the device */
+		ictx = imon_init_intf1(interface, first_if_ctx);
+		if (!ictx) {
+			pr_err("failed to attach to context!\n");
+			ret = -ENODEV;
+			goto fail;
+		}
+
+	}
+
+	usb_set_intfdata(interface, ictx);
+
+	if (ifnum == 0) {
+		if (product == 0xffdc && ictx->rf_device) {
+			sysfs_err = sysfs_create_group(&interface->dev.kobj,
+						       &imon_rf_attr_group);
+			if (sysfs_err)
+				pr_err("Could not create RF sysfs entries(%d)\n",
+				       sysfs_err);
+		}
+
+		if (ictx->display_supported)
+			imon_init_display(ictx, interface);
+	}
+
+	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+	mutex_unlock(&ictx->lock);
+	mutex_unlock(&driver_lock);
+
+	return 0;
+
+fail:
+	mutex_unlock(&driver_lock);
+	dev_err(dev, "unable to register, err %d\n", ret);
+
+	return ret;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void __devexit imon_disconnect(struct usb_interface *interface)
+{
+	struct imon_context *ictx;
+	struct device *dev;
+	int ifnum;
+
+	/* prevent races with multi-interface device probing and display_open */
+	mutex_lock(&driver_lock);
+
+	ictx = usb_get_intfdata(interface);
+	dev = ictx->dev;
+	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	mutex_lock(&ictx->lock);
+
+	/*
+	 * sysfs_remove_group is safe to call even if sysfs_create_group
+	 * hasn't been called
+	 */
+	sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group);
+	sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group);
+
+	usb_set_intfdata(interface, NULL);
+
+	/* Abort ongoing write */
+	if (ictx->tx.busy) {
+		usb_kill_urb(ictx->tx_urb);
+		complete_all(&ictx->tx.finished);
+	}
+
+	if (ifnum == 0) {
+		ictx->dev_present_intf0 = false;
+		usb_kill_urb(ictx->rx_urb_intf0);
+		input_unregister_device(ictx->idev);
+		ir_input_unregister(ictx->rdev);
+		if (ictx->display_supported) {
+			if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+				usb_deregister_dev(interface, &imon_lcd_class);
+			else
+				usb_deregister_dev(interface, &imon_vfd_class);
+		}
+	} else {
+		ictx->dev_present_intf1 = false;
+		usb_kill_urb(ictx->rx_urb_intf1);
+		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+			input_unregister_device(ictx->touch);
+	}
+
+	if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) {
+		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+			del_timer_sync(&ictx->ttimer);
+		mutex_unlock(&ictx->lock);
+		if (!ictx->display_isopen)
+			free_imon_context(ictx);
+	} else
+		mutex_unlock(&ictx->lock);
+
+	mutex_unlock(&driver_lock);
+
+	dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
+		__func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct imon_context *ictx = usb_get_intfdata(intf);
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum == 0)
+		usb_kill_urb(ictx->rx_urb_intf0);
+	else
+		usb_kill_urb(ictx->rx_urb_intf1);
+
+	return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+	int rc = 0;
+	struct imon_context *ictx = usb_get_intfdata(intf);
+	int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (ifnum == 0) {
+		usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+			usb_rcvintpipe(ictx->usbdev_intf0,
+				ictx->rx_endpoint_intf0->bEndpointAddress),
+			ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+			usb_rx_callback_intf0, ictx,
+			ictx->rx_endpoint_intf0->bInterval);
+
+		rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+
+	} else {
+		usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+			usb_rcvintpipe(ictx->usbdev_intf1,
+				ictx->rx_endpoint_intf1->bEndpointAddress),
+			ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+			usb_rx_callback_intf1, ictx,
+			ictx->rx_endpoint_intf1->bInterval);
+
+		rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+	}
+
+	return rc;
+}
+
+static int __init imon_init(void)
+{
+	int rc;
+
+	rc = usb_register(&imon_driver);
+	if (rc) {
+		pr_err("usb register failed(%d)\n", rc);
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+static void __exit imon_exit(void)
+{
+	usb_deregister(&imon_driver);
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
diff --git a/drivers/media/rc/ir-core-priv.h b/drivers/media/rc/ir-core-priv.h
new file mode 100644
index 000000000000..81c936bd793f
--- /dev/null
+++ b/drivers/media/rc/ir-core-priv.h
@@ -0,0 +1,203 @@
+/*
+ * Remote Controller core raw events header
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _IR_RAW_EVENT
+#define _IR_RAW_EVENT
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <media/ir-core.h>
+
+struct ir_raw_handler {
+	struct list_head list;
+
+	u64 protocols; /* which are handled by this handler */
+	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+
+	/* These two should only be used by the lirc decoder */
+	int (*raw_register)(struct input_dev *input_dev);
+	int (*raw_unregister)(struct input_dev *input_dev);
+};
+
+struct ir_raw_event_ctrl {
+	struct list_head		list;		/* to keep track of raw clients */
+	struct task_struct		*thread;
+	spinlock_t			lock;
+	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
+	ktime_t				last_event;	/* when last event occurred */
+	enum raw_event_type		last_type;	/* last event type */
+	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
+	u64				enabled_protocols; /* enabled raw protocol decoders */
+
+	/* raw decoder state follows */
+	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
+	struct nec_dec {
+		int state;
+		unsigned count;
+		u32 bits;
+		bool is_nec_x;
+		bool necx_repeat;
+	} nec;
+	struct rc5_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc5;
+	struct rc6_dec {
+		int state;
+		u8 header;
+		u32 body;
+		bool toggle;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc6;
+	struct sony_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+	} sony;
+	struct jvc_dec {
+		int state;
+		u16 bits;
+		u16 old_bits;
+		unsigned count;
+		bool first;
+		bool toggle;
+	} jvc;
+	struct rc5_sz_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc5_sz;
+	struct lirc_codec {
+		struct ir_input_dev *ir_dev;
+		struct lirc_driver *drv;
+		int carrier_low;
+
+		ktime_t gap_start;
+		u64 gap_duration;
+		bool gap;
+		bool send_timeout_reports;
+
+	} lirc;
+};
+
+/* macros for IR decoders */
+static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+	return d1 > (d2 - margin);
+}
+
+static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+	return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
+}
+
+static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
+{
+	return x->pulse != y->pulse;
+}
+
+static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
+{
+	if (duration > ev->duration)
+		ev->duration = 0;
+	else
+		ev->duration -= duration;
+}
+
+/* Returns true if event is normal pulse/space event */
+static inline bool is_timing_event(struct ir_raw_event ev)
+{
+	return !ev.carrier_report && !ev.reset;
+}
+
+#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
+#define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
+/*
+ * Routines from ir-sysfs.c - Meant to be called only internally inside
+ * ir-core
+ */
+int ir_register_input(struct input_dev *input_dev);
+
+int ir_register_class(struct input_dev *input_dev);
+void ir_unregister_class(struct input_dev *input_dev);
+
+/*
+ * Routines from ir-raw-event.c to be used internally and by decoders
+ */
+u64 ir_raw_get_allowed_protocols(void);
+int ir_raw_event_register(struct input_dev *input_dev);
+void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_init(void);
+
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
+/*
+ * Decoder initialization code
+ *
+ * Those load logic are called during ir-core init, and automatically
+ * loads the compiled decoders for their usage with IR raw events
+ */
+
+/* from ir-nec-decoder.c */
+#ifdef CONFIG_IR_NEC_DECODER_MODULE
+#define load_nec_decode()	request_module("ir-nec-decoder")
+#else
+#define load_nec_decode()	0
+#endif
+
+/* from ir-rc5-decoder.c */
+#ifdef CONFIG_IR_RC5_DECODER_MODULE
+#define load_rc5_decode()	request_module("ir-rc5-decoder")
+#else
+#define load_rc5_decode()	0
+#endif
+
+/* from ir-rc6-decoder.c */
+#ifdef CONFIG_IR_RC6_DECODER_MODULE
+#define load_rc6_decode()	request_module("ir-rc6-decoder")
+#else
+#define load_rc6_decode()	0
+#endif
+
+/* from ir-jvc-decoder.c */
+#ifdef CONFIG_IR_JVC_DECODER_MODULE
+#define load_jvc_decode()	request_module("ir-jvc-decoder")
+#else
+#define load_jvc_decode()	0
+#endif
+
+/* from ir-sony-decoder.c */
+#ifdef CONFIG_IR_SONY_DECODER_MODULE
+#define load_sony_decode()	request_module("ir-sony-decoder")
+#else
+#define load_sony_decode()	0
+#endif
+
+/* from ir-lirc-codec.c */
+#ifdef CONFIG_IR_LIRC_CODEC_MODULE
+#define load_lirc_codec()	request_module("ir-lirc-codec")
+#else
+#define load_lirc_codec()	0
+#endif
+
+
+#endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/rc/ir-functions.c b/drivers/media/rc/ir-functions.c
new file mode 100644
index 000000000000..ec021c92527a
--- /dev/null
+++ b/drivers/media/rc/ir-functions.c
@@ -0,0 +1,120 @@
+/*
+ * some common functions to handle infrared remote protocol decoding for
+ * drivers which have not yet been (or can't be) converted to use the
+ * regular protocol decoders...
+ *
+ * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <media/ir-common.h>
+#include "ir-core-priv.h"
+
+/* -------------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+
+/* RC5 decoding stuff, moved from bttv-input.c to share it with
+ * saa7134 */
+
+/* decode raw bit pattern to RC5 code */
+static u32 ir_rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+			break;
+		case 3:
+			IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
+			return 0;
+		}
+	}
+	IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+void ir_rc5_timer_end(unsigned long data)
+{
+	struct card_ir *ir = (struct card_ir *)data;
+	struct timeval tv;
+	unsigned long current_jiffies;
+	u32 gap;
+	u32 rc5 = 0;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* signal we're ready to start a new code */
+	ir->active = 0;
+
+	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		IR_dprintk(1, "ir-common: spurious timer_end\n");
+		return;
+	}
+
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
+	} else {
+		ir->code = (ir->code << ir->shift_by) | 1;
+		rc5 = ir_rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != ir->start) {
+			IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == ir->addr) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code */
+			ir_keydown(ir->dev, instr, toggle);
+			IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
+				   instr, toggle);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
new file mode 100644
index 000000000000..63dca6e5458b
--- /dev/null
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -0,0 +1,199 @@
+/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define JVC_NBITS		16		/* dev(8) + func(8) */
+#define JVC_UNIT		525000		/* ns */
+#define JVC_HEADER_PULSE	(16 * JVC_UNIT) /* lack of header -> repeat */
+#define JVC_HEADER_SPACE	(8  * JVC_UNIT)
+#define JVC_BIT_PULSE		(1  * JVC_UNIT)
+#define JVC_BIT_0_SPACE		(1  * JVC_UNIT)
+#define JVC_BIT_1_SPACE		(3  * JVC_UNIT)
+#define JVC_TRAILER_PULSE	(1  * JVC_UNIT)
+#define	JVC_TRAILER_SPACE	(35 * JVC_UNIT)
+
+enum jvc_state {
+	STATE_INACTIVE,
+	STATE_HEADER_SPACE,
+	STATE_BIT_PULSE,
+	STATE_BIT_SPACE,
+	STATE_TRAILER_PULSE,
+	STATE_TRAILER_SPACE,
+	STATE_CHECK_REPEAT,
+};
+
+/**
+ * ir_jvc_decode() - Decode one JVC pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @duration:   the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct jvc_dec *data = &ir_dev->raw->jvc;
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2))
+		goto out;
+
+	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+again:
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->count = 0;
+		data->first = true;
+		data->toggle = !data->toggle;
+		data->state = STATE_HEADER_SPACE;
+		return 0;
+
+	case STATE_HEADER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_PULSE;
+		return 0;
+
+	case STATE_BIT_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_SPACE;
+		return 0;
+
+	case STATE_BIT_SPACE:
+		if (ev.pulse)
+			break;
+
+		data->bits <<= 1;
+		if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
+			data->bits |= 1;
+			decrease_duration(&ev, JVC_BIT_1_SPACE);
+		} else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
+			decrease_duration(&ev, JVC_BIT_0_SPACE);
+		else
+			break;
+		data->count++;
+
+		if (data->count == JVC_NBITS)
+			data->state = STATE_TRAILER_PULSE;
+		else
+			data->state = STATE_BIT_PULSE;
+		return 0;
+
+	case STATE_TRAILER_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_TRAILER_SPACE;
+		return 0;
+
+	case STATE_TRAILER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2))
+			break;
+
+		if (data->first) {
+			u32 scancode;
+			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
+				   (bitrev8((data->bits >> 0) & 0xff) << 0);
+			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
+			ir_keydown(input_dev, scancode, data->toggle);
+			data->first = false;
+			data->old_bits = data->bits;
+		} else if (data->bits == data->old_bits) {
+			IR_dprintk(1, "JVC repeat\n");
+			ir_repeat(input_dev);
+		} else {
+			IR_dprintk(1, "JVC invalid repeat msg\n");
+			break;
+		}
+
+		data->count = 0;
+		data->state = STATE_CHECK_REPEAT;
+		return 0;
+
+	case STATE_CHECK_REPEAT:
+		if (!ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			data->state = STATE_INACTIVE;
+  else
+			data->state = STATE_BIT_PULSE;
+		goto again;
+	}
+
+out:
+	IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler jvc_handler = {
+	.protocols	= IR_TYPE_JVC,
+	.decode		= ir_jvc_decode,
+};
+
+static int __init ir_jvc_decode_init(void)
+{
+	ir_raw_handler_register(&jvc_handler);
+
+	printk(KERN_INFO "IR JVC protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_jvc_decode_exit(void)
+{
+	ir_raw_handler_unregister(&jvc_handler);
+}
+
+module_init(ir_jvc_decode_init);
+module_exit(ir_jvc_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("JVC IR protocol decoder");
diff --git a/drivers/media/rc/ir-keytable.c b/drivers/media/rc/ir-keytable.c
new file mode 100644
index 000000000000..8039110350d3
--- /dev/null
+++ b/drivers/media/rc/ir-keytable.c
@@ -0,0 +1,766 @@
+/* ir-keytable.c - handle IR scancode->keycode tables
+ *
+ * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "ir-core-priv.h"
+
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE	256
+#define IR_TAB_MAX_SIZE	8192
+
+/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
+#define IR_KEYPRESS_TIMEOUT 250
+
+/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_tab:	the ir_scancode_table to initialize
+ * @name:	name to assign to the table
+ * @ir_type:	ir type to assign to the new table
+ * @size:	initial size of the table
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will initialize the ir_scancode_table and will allocate
+ * memory to hold at least the specified number elements.
+ */
+static int ir_create_table(struct ir_scancode_table *rc_tab,
+			   const char *name, u64 ir_type, size_t size)
+{
+	rc_tab->name = name;
+	rc_tab->ir_type = ir_type;
+	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
+	if (!rc_tab->scan)
+		return -ENOMEM;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_tab->size, rc_tab->alloc);
+	return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_tab:	the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct ir_scancode_table *rc_tab)
+{
+	rc_tab->size = 0;
+	kfree(rc_tab->scan);
+	rc_tab->scan = NULL;
+}
+
+/**
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_tab:	the ir_scancode_table to resize
+ * @gfp_flags:	gfp flags to use when allocating memory
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will shrink the ir_scancode_table if it has lots of
+ * unused entries and grow it if it is full.
+ */
+static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
+{
+	unsigned int oldalloc = rc_tab->alloc;
+	unsigned int newalloc = oldalloc;
+	struct ir_scancode *oldscan = rc_tab->scan;
+	struct ir_scancode *newscan;
+
+	if (rc_tab->size == rc_tab->len) {
+		/* All entries in use -> grow keytable */
+		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+			return -ENOMEM;
+
+		newalloc *= 2;
+		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+	}
+
+	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+		/* Less than 1/3 of entries in use -> shrink keytable */
+		newalloc /= 2;
+		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+	}
+
+	if (newalloc == oldalloc)
+		return 0;
+
+	newscan = kmalloc(newalloc, gfp_flags);
+	if (!newscan) {
+		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+		return -ENOMEM;
+	}
+
+	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
+	rc_tab->scan = newscan;
+	rc_tab->alloc = newalloc;
+	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+	kfree(oldscan);
+	return 0;
+}
+
+/**
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @rc_tab:	scancode table to be adjusted
+ * @index:	index of the mapping that needs to be updated
+ * @keycode:	the desired keycode
+ * @return:	previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycopde mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct input_dev *dev,
+				      struct ir_scancode_table *rc_tab,
+				      unsigned int index,
+				      unsigned int new_keycode)
+{
+	int old_keycode = rc_tab->scan[index].keycode;
+	int i;
+
+	/* Did the user wish to remove the mapping? */
+	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+			   index, rc_tab->scan[index].scancode);
+		rc_tab->len--;
+		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
+			(rc_tab->len - index) * sizeof(struct ir_scancode));
+	} else {
+		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+			   index,
+			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
+			   rc_tab->scan[index].scancode, new_keycode);
+		rc_tab->scan[index].keycode = new_keycode;
+		__set_bit(new_keycode, dev->keybit);
+	}
+
+	if (old_keycode != KEY_RESERVED) {
+		/* A previous mapping was updated... */
+		__clear_bit(old_keycode, dev->keybit);
+		/* ... but another scancode might use the same keycode */
+		for (i = 0; i < rc_tab->len; i++) {
+			if (rc_tab->scan[i].keycode == old_keycode) {
+				__set_bit(old_keycode, dev->keybit);
+				break;
+			}
+		}
+
+		/* Possibly shrink the keytable, failure is not a problem */
+		ir_resize_table(rc_tab, GFP_ATOMIC);
+	}
+
+	return old_keycode;
+}
+
+/**
+ * ir_locate_scancode() - set a keycode in the scancode->keycode table
+ * @ir_dev:	the struct ir_input_dev device descriptor
+ * @rc_tab:	scancode table to be searched
+ * @scancode:	the desired scancode
+ * @resize:	controls whether we allowed to resize the table to
+ *		accomodate not yet present scancodes
+ * @return:	index of the mapping containing scancode in question
+ *		or -1U in case of failure.
+ *
+ * This routine is used to locate given scancode in ir_scancode_table.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
+ */
+static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+					  struct ir_scancode_table *rc_tab,
+					  unsigned int scancode,
+					  bool resize)
+{
+	unsigned int i;
+
+	/*
+	 * Unfortunately, some hardware-based IR decoders don't provide
+	 * all bits for the complete IR code. In general, they provide only
+	 * the command part of the IR code. Yet, as it is possible to replace
+	 * the provided IR with another one, it is needed to allow loading
+	 * IR tables from other remotes. So,
+	 */
+	if (ir_dev->props && ir_dev->props->scanmask)
+		scancode &= ir_dev->props->scanmask;
+
+	/* First check if we already have a mapping for this ir command */
+	for (i = 0; i < rc_tab->len; i++) {
+		if (rc_tab->scan[i].scancode == scancode)
+			return i;
+
+		/* Keytable is sorted from lowest to highest scancode */
+		if (rc_tab->scan[i].scancode >= scancode)
+			break;
+	}
+
+	/* No previous mapping found, we might need to grow the table */
+	if (rc_tab->size == rc_tab->len) {
+		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+			return -1U;
+	}
+
+	/* i is the proper index to insert our new keycode */
+	if (i < rc_tab->len)
+		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
+			(rc_tab->len - i) * sizeof(struct ir_scancode));
+	rc_tab->scan[i].scancode = scancode;
+	rc_tab->scan[i].keycode = KEY_RESERVED;
+	rc_tab->len++;
+
+	return i;
+}
+
+/**
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	result
+ * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ */
+static int ir_setkeycode(struct input_dev *dev,
+			 const struct input_keymap_entry *ke,
+			 unsigned int *old_keycode)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int index;
+	unsigned int scancode;
+	int retval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+		if (index >= rc_tab->len) {
+			retval = -EINVAL;
+			goto out;
+		}
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+		if (index >= rc_tab->len) {
+			retval = -ENOMEM;
+			goto out;
+		}
+	}
+
+	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+
+out:
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	return retval;
+}
+
+/**
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @to:		the struct ir_scancode_table to copy entries to
+ * @from:	the struct ir_scancode_table to copy entries from
+ * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle table initialization.
+ */
+static int ir_setkeytable(struct ir_input_dev *ir_dev,
+			  const struct ir_scancode_table *from)
+{
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int i, index;
+	int rc;
+
+	rc = ir_create_table(&ir_dev->rc_tab,
+			     from->name, from->ir_type, from->size);
+	if (rc)
+		return rc;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_tab->size, rc_tab->alloc);
+
+	for (i = 0; i < from->size; i++) {
+		index = ir_establish_scancode(ir_dev, rc_tab,
+					      from->scan[i].scancode, false);
+		if (index >= rc_tab->len) {
+			rc = -ENOMEM;
+			break;
+		}
+
+		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+				  from->scan[i].keycode);
+	}
+
+	if (rc)
+		ir_free_table(rc_tab);
+
+	return rc;
+}
+
+/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_tab:	the &struct ir_scancode_table to search
+ * @scancode:	scancode to look for in the table
+ * @return:	index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+					  unsigned int scancode)
+{
+	int start = 0;
+	int end = rc_tab->len - 1;
+	int mid;
+
+	while (start <= end) {
+		mid = (start + end) / 2;
+		if (rc_tab->scan[mid].scancode < scancode)
+			start = mid + 1;
+		else if (rc_tab->scan[mid].scancode > scancode)
+			end = mid - 1;
+		else
+			return mid;
+	}
+
+	return -1U;
+}
+
+/**
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	used to return the keycode, if found, or KEY_RESERVED
+ * @return:	always returns zero.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ */
+static int ir_getkeycode(struct input_dev *dev,
+			 struct input_keymap_entry *ke)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct ir_scancode *entry;
+	unsigned long flags;
+	unsigned int index;
+	unsigned int scancode;
+	int retval;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_lookup_by_scancode(rc_tab, scancode);
+	}
+
+	if (index >= rc_tab->len) {
+		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+				   scancode);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	entry = &rc_tab->scan[index];
+
+	ke->index = index;
+	ke->keycode = entry->keycode;
+	ke->len = sizeof(entry->scancode);
+	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+	retval = 0;
+
+out:
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	return retval;
+}
+
+/**
+ * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @scancode:	the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int keycode;
+	unsigned int index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	index = ir_lookup_by_scancode(rc_tab, scancode);
+	keycode = index < rc_tab->len ?
+			rc_tab->scan[index].keycode : KEY_RESERVED;
+
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+	if (keycode != KEY_RESERVED)
+		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+			   dev->name, scancode, keycode);
+
+	return keycode;
+}
+EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+
+/**
+ * ir_do_keyup() - internal function to signal the release of a keypress
+ * @ir:         the struct ir_input_dev descriptor of the device
+ *
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keyup(struct ir_input_dev *ir)
+{
+	if (!ir->keypressed)
+		return;
+
+	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
+	input_report_key(ir->input_dev, ir->last_keycode, 0);
+	input_sync(ir->input_dev);
+	ir->keypressed = false;
+}
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev:        the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keyup(ir);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keyup);
+
+/**
+ * ir_timer_keyup() - generates a keyup event after a timeout
+ * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
+ *
+ * This routine will generate a keyup event some time after a keydown event
+ * is generated when no further activity has been detected.
+ */
+static void ir_timer_keyup(unsigned long cookie)
+{
+	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+	unsigned long flags;
+
+	/*
+	 * ir->keyup_jiffies is used to prevent a race condition if a
+	 * hardware interrupt occurs at this point and the keyup timer
+	 * event is moved further into the future as a result.
+	 *
+	 * The timer will then be reactivated and this function called
+	 * again in the future. We need to exit gracefully in that case
+	 * to allow the input subsystem to do its auto-repeat magic or
+	 * a keyup event might follow immediately after the keydown.
+	 */
+	spin_lock_irqsave(&ir->keylock, flags);
+	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
+		ir_do_keyup(ir);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+
+/**
+ * ir_repeat() - notifies the IR core that a key is still pressed
+ * @dev:        the struct input_dev descriptor of the device
+ *
+ * This routine is used by IR decoders when a repeat message which does
+ * not include the necessary bits to reproduce the scancode has been
+ * received.
+ */
+void ir_repeat(struct input_dev *dev)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+
+	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
+	if (!ir->keypressed)
+		goto out;
+
+	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+
+out:
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_repeat);
+
+/**
+ * ir_do_keydown() - internal function to process a keypress
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode of the keypress
+ * @keycode:    the keycode of the keypress
+ * @toggle:     the toggle value of the keypress
+ *
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+			  u32 keycode, u8 toggle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
+	/* Repeat event? */
+	if (ir->keypressed &&
+	    ir->last_scancode == scancode &&
+	    ir->last_toggle == toggle)
+		return;
+
+	/* Release old keypress */
+	ir_do_keyup(ir);
+
+	ir->last_scancode = scancode;
+	ir->last_toggle = toggle;
+	ir->last_keycode = keycode;
+
+	if (keycode == KEY_RESERVED)
+		return;
+
+	/* Register a keypress */
+	ir->keypressed = true;
+	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
+		   dev->name, keycode, scancode);
+	input_report_key(dev, ir->last_keycode, 1);
+	input_sync(dev);
+}
+
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+
+	if (ir->keypressed) {
+		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+	}
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown);
+
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ *                          an automatic keyup event at a later time
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
+static int ir_open(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	return ir_dev->props->open(ir_dev->props->priv);
+}
+
+static void ir_close(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	ir_dev->props->close(ir_dev->props->priv);
+}
+
+/**
+ * __ir_input_register() - sets the IR keycode table and add the handlers
+ *			    for keymap table get/set
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
+ *
+ * This routine is used to initialize the input infrastructure
+ * to work with an IR.
+ * It will register the input/evdev interface for the device and
+ * register the syfs code for IR class
+ */
+int __ir_input_register(struct input_dev *input_dev,
+		      const struct ir_scancode_table *rc_tab,
+		      struct ir_dev_props *props,
+		      const char *driver_name)
+{
+	struct ir_input_dev *ir_dev;
+	int rc;
+
+	if (rc_tab->scan == NULL || !rc_tab->size)
+		return -EINVAL;
+
+	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
+	if (!ir_dev)
+		return -ENOMEM;
+
+	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
+	if (!ir_dev->driver_name) {
+		rc = -ENOMEM;
+		goto out_dev;
+	}
+
+	input_dev->getkeycode_new = ir_getkeycode;
+	input_dev->setkeycode_new = ir_setkeycode;
+	input_set_drvdata(input_dev, ir_dev);
+	ir_dev->input_dev = input_dev;
+
+	spin_lock_init(&ir_dev->rc_tab.lock);
+	spin_lock_init(&ir_dev->keylock);
+	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
+
+	if (props) {
+		ir_dev->props = props;
+		if (props->open)
+			input_dev->open = ir_open;
+		if (props->close)
+			input_dev->close = ir_close;
+	}
+
+	set_bit(EV_KEY, input_dev->evbit);
+	set_bit(EV_REP, input_dev->evbit);
+	set_bit(EV_MSC, input_dev->evbit);
+	set_bit(MSC_SCAN, input_dev->mscbit);
+
+	rc = ir_setkeytable(ir_dev, rc_tab);
+	if (rc)
+		goto out_name;
+
+	rc = ir_register_class(input_dev);
+	if (rc < 0)
+		goto out_table;
+
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+			rc = ir_raw_event_register(input_dev);
+			if (rc < 0)
+				goto out_event;
+		}
+
+	rc = ir_register_input(input_dev);
+	if (rc < 0)
+		goto out_event;
+
+	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+		   driver_name, rc_tab->name,
+		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+			" in raw mode" : "");
+
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes.
+	 */
+	input_dev->rep[REP_DELAY] = 500;
+
+	return 0;
+
+out_event:
+	ir_unregister_class(input_dev);
+out_table:
+	ir_free_table(&ir_dev->rc_tab);
+out_name:
+	kfree(ir_dev->driver_name);
+out_dev:
+	kfree(ir_dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(__ir_input_register);
+
+/**
+ * ir_input_unregister() - unregisters IR and frees resources
+ * @input_dev:	the struct input_dev descriptor of the device
+
+ * This routine is used to free memory and de-register interfaces.
+ */
+void ir_input_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	if (!ir_dev)
+		return;
+
+	IR_dprintk(1, "Freed keycode table\n");
+
+	del_timer_sync(&ir_dev->timer_keyup);
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+			ir_raw_event_unregister(input_dev);
+
+	ir_free_table(&ir_dev->rc_tab);
+
+	ir_unregister_class(input_dev);
+
+	kfree(ir_dev->driver_name);
+	kfree(ir_dev);
+}
+EXPORT_SYMBOL_GPL(ir_input_unregister);
+
+int ir_core_debug;    /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(ir_core_debug);
+module_param_named(debug, ir_core_debug, int, 0644);
+
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
new file mode 100644
index 000000000000..9fc0db9d344d
--- /dev/null
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -0,0 +1,410 @@
+/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
+ *
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+#include <media/ir-core.h>
+#include "ir-core-priv.h"
+
+#define LIRCBUF_SIZE 256
+
+/**
+ * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
+ *		      lircd userspace daemon for decoding.
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @duration:	the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the lirc interfaces aren't wired up.
+ */
+static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+	int sample;
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+		return 0;
+
+	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+		return -EINVAL;
+
+	/* Packet start */
+	if (ev.reset)
+		return 0;
+
+	/* Carrier reports */
+	if (ev.carrier_report) {
+		sample = LIRC_FREQUENCY(ev.carrier);
+
+	/* Packet end */
+	} else if (ev.timeout) {
+
+		if (lirc->gap)
+			return 0;
+
+		lirc->gap_start = ktime_get();
+		lirc->gap = true;
+		lirc->gap_duration = ev.duration;
+
+		if (!lirc->send_timeout_reports)
+			return 0;
+
+		sample = LIRC_TIMEOUT(ev.duration / 1000);
+
+	/* Normal sample */
+	} else {
+
+		if (lirc->gap) {
+			int gap_sample;
+
+			lirc->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
+				lirc->gap_start));
+
+			/* Convert to ms and cap by LIRC_VALUE_MASK */
+			do_div(lirc->gap_duration, 1000);
+			lirc->gap_duration = min(lirc->gap_duration,
+							(u64)LIRC_VALUE_MASK);
+
+			gap_sample = LIRC_SPACE(lirc->gap_duration);
+			lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+						(unsigned char *) &gap_sample);
+			lirc->gap = false;
+		}
+
+		sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
+					LIRC_SPACE(ev.duration / 1000);
+	}
+
+	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+			  (unsigned char *) &sample);
+	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+
+	return 0;
+}
+
+static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
+				   size_t n, loff_t *ppos)
+{
+	struct lirc_codec *lirc;
+	struct ir_input_dev *ir_dev;
+	int *txbuf; /* buffer with values to transmit */
+	int ret = 0, count;
+
+	lirc = lirc_get_pdata(file);
+	if (!lirc)
+		return -EFAULT;
+
+	if (n % sizeof(int))
+		return -EINVAL;
+
+	count = n / sizeof(int);
+	if (count > LIRCBUF_SIZE || count % 2 == 0)
+		return -EINVAL;
+
+	txbuf = memdup_user(buf, n);
+	if (IS_ERR(txbuf))
+		return PTR_ERR(txbuf);
+
+	ir_dev = lirc->ir_dev;
+	if (!ir_dev) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (ir_dev->props && ir_dev->props->tx_ir)
+		ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+
+out:
+	kfree(txbuf);
+	return ret;
+}
+
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+			unsigned long __user arg)
+{
+	struct lirc_codec *lirc;
+	struct ir_input_dev *ir_dev;
+	int ret = 0;
+	void *drv_data;
+	__u32 val = 0, tmp;
+
+	lirc = lirc_get_pdata(filep);
+	if (!lirc)
+		return -EFAULT;
+
+	ir_dev = lirc->ir_dev;
+	if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+		return -EFAULT;
+
+	drv_data = ir_dev->props->priv;
+
+	if (_IOC_DIR(cmd) & _IOC_WRITE) {
+		ret = get_user(val, (__u32 *)arg);
+		if (ret)
+			return ret;
+	}
+
+	switch (cmd) {
+
+	/* legacy support */
+	case LIRC_GET_SEND_MODE:
+		val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+		break;
+
+	case LIRC_SET_SEND_MODE:
+		if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+			return -EINVAL;
+		return 0;
+
+	/* TX settings */
+	case LIRC_SET_TRANSMITTER_MASK:
+		if (!ir_dev->props->s_tx_mask)
+			return -EINVAL;
+
+		return ir_dev->props->s_tx_mask(drv_data, val);
+
+	case LIRC_SET_SEND_CARRIER:
+		if (!ir_dev->props->s_tx_carrier)
+			return -EINVAL;
+
+		return ir_dev->props->s_tx_carrier(drv_data, val);
+
+	case LIRC_SET_SEND_DUTY_CYCLE:
+		if (!ir_dev->props->s_tx_duty_cycle)
+			return -ENOSYS;
+
+		if (val <= 0 || val >= 100)
+			return -EINVAL;
+
+		return ir_dev->props->s_tx_duty_cycle(drv_data, val);
+
+	/* RX settings */
+	case LIRC_SET_REC_CARRIER:
+		if (!ir_dev->props->s_rx_carrier_range)
+			return -ENOSYS;
+
+		if (val <= 0)
+			return -EINVAL;
+
+		return ir_dev->props->s_rx_carrier_range(drv_data,
+			ir_dev->raw->lirc.carrier_low, val);
+
+	case LIRC_SET_REC_CARRIER_RANGE:
+		if (val <= 0)
+			return -EINVAL;
+
+		ir_dev->raw->lirc.carrier_low = val;
+		return 0;
+
+	case LIRC_GET_REC_RESOLUTION:
+		val = ir_dev->props->rx_resolution;
+		break;
+
+	case LIRC_SET_WIDEBAND_RECEIVER:
+		if (!ir_dev->props->s_learning_mode)
+			return -ENOSYS;
+
+		return ir_dev->props->s_learning_mode(drv_data, !!val);
+
+	case LIRC_SET_MEASURE_CARRIER_MODE:
+		if (!ir_dev->props->s_carrier_report)
+			return -ENOSYS;
+
+		return ir_dev->props->s_carrier_report(drv_data, !!val);
+
+	/* Generic timeout support */
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->min_timeout / 1000;
+		break;
+
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+		val = ir_dev->props->max_timeout / 1000;
+		break;
+
+	case LIRC_SET_REC_TIMEOUT:
+		if (!ir_dev->props->max_timeout)
+			return -ENOSYS;
+
+		tmp = val * 1000;
+
+		if (tmp < ir_dev->props->min_timeout ||
+			tmp > ir_dev->props->max_timeout)
+				return -EINVAL;
+
+		ir_dev->props->timeout = tmp;
+		break;
+
+	case LIRC_SET_REC_TIMEOUT_REPORTS:
+		lirc->send_timeout_reports = !!val;
+		break;
+
+	default:
+		return lirc_dev_fop_ioctl(filep, cmd, arg);
+	}
+
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		ret = put_user(val, (__u32 *)arg);
+
+	return ret;
+}
+
+static int ir_lirc_open(void *data)
+{
+	return 0;
+}
+
+static void ir_lirc_close(void *data)
+{
+	return;
+}
+
+static struct file_operations lirc_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ir_lirc_transmit_ir,
+	.unlocked_ioctl	= ir_lirc_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= ir_lirc_ioctl,
+#endif
+	.read		= lirc_dev_fop_read,
+	.poll		= lirc_dev_fop_poll,
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+	.llseek		= no_llseek,
+};
+
+static int ir_lirc_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct lirc_driver *drv;
+	struct lirc_buffer *rbuf;
+	int rc = -ENOMEM;
+	unsigned long features;
+
+	drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+	if (!drv)
+		return rc;
+
+	rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+	if (!rbuf)
+		goto rbuf_alloc_failed;
+
+	rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
+	if (rc)
+		goto rbuf_init_failed;
+
+	features = LIRC_CAN_REC_MODE2;
+	if (ir_dev->props->tx_ir) {
+
+		features |= LIRC_CAN_SEND_PULSE;
+		if (ir_dev->props->s_tx_mask)
+			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
+		if (ir_dev->props->s_tx_carrier)
+			features |= LIRC_CAN_SET_SEND_CARRIER;
+
+		if (ir_dev->props->s_tx_duty_cycle)
+			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+	}
+
+	if (ir_dev->props->s_rx_carrier_range)
+		features |= LIRC_CAN_SET_REC_CARRIER |
+			LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+	if (ir_dev->props->s_learning_mode)
+		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+	if (ir_dev->props->s_carrier_report)
+		features |= LIRC_CAN_MEASURE_CARRIER;
+
+
+	if (ir_dev->props->max_timeout)
+		features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
+	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
+		 ir_dev->driver_name);
+	drv->minor = -1;
+	drv->features = features;
+	drv->data = &ir_dev->raw->lirc;
+	drv->rbuf = rbuf;
+	drv->set_use_inc = &ir_lirc_open;
+	drv->set_use_dec = &ir_lirc_close;
+	drv->code_length = sizeof(struct ir_raw_event) * 8;
+	drv->fops = &lirc_fops;
+	drv->dev = &ir_dev->dev;
+	drv->owner = THIS_MODULE;
+
+	drv->minor = lirc_register_driver(drv);
+	if (drv->minor < 0) {
+		rc = -ENODEV;
+		goto lirc_register_failed;
+	}
+
+	ir_dev->raw->lirc.drv = drv;
+	ir_dev->raw->lirc.ir_dev = ir_dev;
+	return 0;
+
+lirc_register_failed:
+rbuf_init_failed:
+	kfree(rbuf);
+rbuf_alloc_failed:
+	kfree(drv);
+
+	return rc;
+}
+
+static int ir_lirc_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+
+	lirc_unregister_driver(lirc->drv->minor);
+	lirc_buffer_free(lirc->drv->rbuf);
+	kfree(lirc->drv);
+
+	return 0;
+}
+
+static struct ir_raw_handler lirc_handler = {
+	.protocols	= IR_TYPE_LIRC,
+	.decode		= ir_lirc_decode,
+	.raw_register	= ir_lirc_register,
+	.raw_unregister	= ir_lirc_unregister,
+};
+
+static int __init ir_lirc_codec_init(void)
+{
+	ir_raw_handler_register(&lirc_handler);
+
+	printk(KERN_INFO "IR LIRC bridge handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_lirc_codec_exit(void)
+{
+	ir_raw_handler_unregister(&lirc_handler);
+}
+
+module_init(ir_lirc_codec_init);
+module_exit(ir_lirc_codec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("LIRC IR handler bridge");
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
new file mode 100644
index 000000000000..70993f79c8a2
--- /dev/null
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -0,0 +1,217 @@
+/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define NEC_NBITS		32
+#define NEC_UNIT		562500  /* ns */
+#define NEC_HEADER_PULSE	(16 * NEC_UNIT)
+#define NECX_HEADER_PULSE	(8  * NEC_UNIT) /* Less common NEC variant */
+#define NEC_HEADER_SPACE	(8  * NEC_UNIT)
+#define NEC_REPEAT_SPACE	(4  * NEC_UNIT)
+#define NEC_BIT_PULSE		(1  * NEC_UNIT)
+#define NEC_BIT_0_SPACE		(1  * NEC_UNIT)
+#define NEC_BIT_1_SPACE		(3  * NEC_UNIT)
+#define	NEC_TRAILER_PULSE	(1  * NEC_UNIT)
+#define	NEC_TRAILER_SPACE	(10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS	1
+
+enum nec_state {
+	STATE_INACTIVE,
+	STATE_HEADER_SPACE,
+	STATE_BIT_PULSE,
+	STATE_BIT_SPACE,
+	STATE_TRAILER_PULSE,
+	STATE_TRAILER_SPACE,
+};
+
+/**
+ * ir_nec_decode() - Decode one NEC pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @duration:	the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct nec_dec *data = &ir_dev->raw->nec;
+	u32 scancode;
+	u8 address, not_address, command, not_command;
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+			data->is_nec_x = false;
+			data->necx_repeat = false;
+		} else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+			data->is_nec_x = true;
+		else
+			break;
+
+		data->count = 0;
+		data->state = STATE_HEADER_SPACE;
+		return 0;
+
+	case STATE_HEADER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) {
+			data->state = STATE_BIT_PULSE;
+			return 0;
+		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
+			ir_repeat(input_dev);
+			IR_dprintk(1, "Repeat last key\n");
+			data->state = STATE_TRAILER_PULSE;
+			return 0;
+		}
+
+		break;
+
+	case STATE_BIT_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_SPACE;
+		return 0;
+
+	case STATE_BIT_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+			geq_margin(ev.duration,
+			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+				IR_dprintk(1, "Repeat last key\n");
+				ir_repeat(input_dev);
+				data->state = STATE_INACTIVE;
+				return 0;
+
+		} else if (data->count > NECX_REPEAT_BITS)
+			data->necx_repeat = false;
+
+		data->bits <<= 1;
+		if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
+			data->bits |= 1;
+		else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
+			break;
+		data->count++;
+
+		if (data->count == NEC_NBITS)
+			data->state = STATE_TRAILER_PULSE;
+		else
+			data->state = STATE_BIT_PULSE;
+
+		return 0;
+
+	case STATE_TRAILER_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2))
+			break;
+
+		data->state = STATE_TRAILER_SPACE;
+		return 0;
+
+	case STATE_TRAILER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
+			break;
+
+		address     = bitrev8((data->bits >> 24) & 0xff);
+		not_address = bitrev8((data->bits >> 16) & 0xff);
+		command	    = bitrev8((data->bits >>  8) & 0xff);
+		not_command = bitrev8((data->bits >>  0) & 0xff);
+
+		if ((command ^ not_command) != 0xff) {
+			IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
+				   data->bits);
+			break;
+		}
+
+		if ((address ^ not_address) != 0xff) {
+			/* Extended NEC */
+			scancode = address     << 16 |
+				   not_address <<  8 |
+				   command;
+			IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode);
+		} else {
+			/* Normal NEC */
+			scancode = address << 8 | command;
+			IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
+		}
+
+		if (data->is_nec_x)
+			data->necx_repeat = true;
+
+		ir_keydown(input_dev, scancode, 0);
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler nec_handler = {
+	.protocols	= IR_TYPE_NEC,
+	.decode		= ir_nec_decode,
+};
+
+static int __init ir_nec_decode_init(void)
+{
+	ir_raw_handler_register(&nec_handler);
+
+	printk(KERN_INFO "IR NEC protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_nec_decode_exit(void)
+{
+	ir_raw_handler_unregister(&nec_handler);
+}
+
+module_init(ir_nec_decode_init);
+module_exit(ir_nec_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("NEC IR protocol decoder");
diff --git a/drivers/media/rc/ir-raw-event.c b/drivers/media/rc/ir-raw-event.c
new file mode 100644
index 000000000000..a06a07e4e0b1
--- /dev/null
+++ b/drivers/media/rc/ir-raw-event.c
@@ -0,0 +1,382 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include "ir-core-priv.h"
+
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE      512
+
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
+/* Used to handle IR raw handler extensions */
+static DEFINE_MUTEX(ir_raw_handler_lock);
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
+
+#ifdef MODULE
+/* Used to load the decoders */
+static struct work_struct wq_load;
+#endif
+
+static int ir_raw_event_thread(void *data)
+{
+	struct ir_raw_event ev;
+	struct ir_raw_handler *handler;
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+	int retval;
+
+	while (!kthread_should_stop()) {
+
+		spin_lock_irq(&raw->lock);
+		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+
+		if (!retval) {
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			if (kthread_should_stop())
+				set_current_state(TASK_RUNNING);
+
+			spin_unlock_irq(&raw->lock);
+			schedule();
+			continue;
+		}
+
+		spin_unlock_irq(&raw->lock);
+
+
+		BUG_ON(retval != sizeof(ev));
+
+		mutex_lock(&ir_raw_handler_lock);
+		list_for_each_entry(handler, &ir_raw_handler_list, list)
+			handler->decode(raw->input_dev, ev);
+		raw->prev_ev = ev;
+		mutex_unlock(&ir_raw_handler_lock);
+	}
+
+	return 0;
+}
+
+/**
+ * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
+ * @input_dev:	the struct input_dev device descriptor
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This routine (which may be called from an interrupt context) stores a
+ * pulse/space duration for the raw ir decoding state machines. Pulses are
+ * signalled as positive values and spaces as negative values. A zero value
+ * will reset the decoding state machines.
+ */
+int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+
+	if (!ir->raw)
+		return -EINVAL;
+
+	IR_dprintk(2, "sample: (%05dus %s)\n",
+		TO_US(ev->duration), TO_STR(ev->pulse));
+
+	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store);
+
+/**
+ * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines. This is used by
+ * hardware which does not provide durations directly but only interrupts
+ * (or similar events) on state change.
+ */
+int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+{
+	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
+	ktime_t			now;
+	s64			delta; /* ns */
+	struct ir_raw_event	ev;
+	int			rc = 0;
+
+	if (!ir->raw)
+		return -EINVAL;
+
+	now = ktime_get();
+	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+	/* Check for a long duration since last event or if we're
+	 * being called for the first time, note that delta can't
+	 * possibly be negative.
+	 */
+	ev.duration = 0;
+	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+		type |= IR_START_EVENT;
+	else
+		ev.duration = delta;
+
+	if (type & IR_START_EVENT)
+		ir_raw_event_reset(input_dev);
+	else if (ir->raw->last_type & IR_SPACE) {
+		ev.pulse = false;
+		rc = ir_raw_event_store(input_dev, &ev);
+	} else if (ir->raw->last_type & IR_PULSE) {
+		ev.pulse = true;
+		rc = ir_raw_event_store(input_dev, &ev);
+	} else
+		return 0;
+
+	ir->raw->last_event = now;
+	ir->raw->last_type = type;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, false);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout) {
+		ir_raw_event_set_idle(input_dev, true);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+/**
+ * ir_raw_event_set_idle() - hint the ir core if device is receiving
+ * IR data or not
+ * @input_dev: the struct input_dev device descriptor
+ * @idle: the hint value
+ */
+void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!ir->props || !ir->raw)
+		return;
+
+	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
+
+	if (idle) {
+		raw->this_ev.timeout = true;
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		init_ir_raw_event(&raw->this_ev);
+	}
+
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
+ * ir_raw_event_handle() - schedules the decoding of stored ir data
+ * @input_dev:	the struct input_dev device descriptor
+ *
+ * This routine will signal the workqueue to start decoding stored ir data.
+ */
+void ir_raw_event_handle(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	unsigned long flags;
+
+	if (!ir->raw)
+		return;
+
+	spin_lock_irqsave(&ir->raw->lock, flags);
+	wake_up_process(ir->raw->thread);
+	spin_unlock_irqrestore(&ir->raw->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_handle);
+
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+	u64 protocols;
+	mutex_lock(&ir_raw_handler_lock);
+	protocols = available_protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+	return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	int rc;
+	struct ir_raw_handler *handler;
+
+	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
+	if (!ir->raw)
+		return -ENOMEM;
+
+	ir->raw->input_dev = input_dev;
+
+	ir->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+			 GFP_KERNEL);
+	if (rc < 0) {
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return rc;
+	}
+
+	spin_lock_init(&ir->raw->lock);
+	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+			"rc%u",  (unsigned int)ir->devno);
+
+	if (IS_ERR(ir->raw->thread)) {
+		int ret = PTR_ERR(ir->raw->thread);
+
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return ret;
+	}
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir->raw->list, &ir_raw_client_list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_register)
+			handler->raw_register(ir->raw->input_dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+
+void ir_raw_event_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_handler *handler;
+
+	if (!ir->raw)
+		return;
+
+	kthread_stop(ir->raw->thread);
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&ir->raw->list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_unregister)
+			handler->raw_unregister(ir->raw->input_dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	kfifo_free(&ir->raw->kfifo);
+	kfree(ir->raw);
+	ir->raw = NULL;
+}
+
+/*
+ * Extension interface - used to register the IR decoders
+ */
+
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+	if (ir_raw_handler->raw_register)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_register(raw->input_dev);
+	available_protocols |= ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ir_raw_handler_register);
+
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&ir_raw_handler->list);
+	if (ir_raw_handler->raw_unregister)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_unregister(raw->input_dev);
+	available_protocols &= ~ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+}
+EXPORT_SYMBOL(ir_raw_handler_unregister);
+
+#ifdef MODULE
+static void init_decoders(struct work_struct *work)
+{
+	/* Load the decoder modules */
+
+	load_nec_decode();
+	load_rc5_decode();
+	load_rc6_decode();
+	load_jvc_decode();
+	load_sony_decode();
+	load_lirc_codec();
+
+	/* If needed, we may later add some init code. In this case,
+	   it is needed to change the CONFIG_MODULE test at ir-core.h
+	 */
+}
+#endif
+
+void ir_raw_init(void)
+{
+#ifdef MODULE
+	INIT_WORK(&wq_load, init_decoders);
+	schedule_work(&wq_load);
+#endif
+}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
new file mode 100644
index 000000000000..572ed4ca8c68
--- /dev/null
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -0,0 +1,190 @@
+/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+/*
+ * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols.
+ * There are other variants that use a different number of bits.
+ * This is currently unsupported.
+ * It considers a carrier of 36 kHz, with a total of 14/20 bits, where
+ * the first two bits are start bits, and a third one is a filing bit
+ */
+
+#include "ir-core-priv.h"
+
+#define RC5_NBITS		14
+#define RC5X_NBITS		20
+#define CHECK_RC5X_NBITS	8
+#define RC5_UNIT		888888 /* ns */
+#define RC5_BIT_START		(1 * RC5_UNIT)
+#define RC5_BIT_END		(1 * RC5_UNIT)
+#define RC5X_SPACE		(4 * RC5_UNIT)
+
+enum rc5_state {
+	STATE_INACTIVE,
+	STATE_BIT_START,
+	STATE_BIT_END,
+	STATE_CHECK_RC5X,
+	STATE_FINISHED,
+};
+
+/**
+ * ir_rc5_decode() - Decode one RC-5 pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct rc5_dec *data = &ir_dev->raw->rc5;
+	u8 toggle;
+	u32 scancode;
+
+        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+                return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+		goto out;
+
+again:
+	IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+		return 0;
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		data->state = STATE_BIT_START;
+		data->count = 1;
+		/* We just need enough bits to get to STATE_CHECK_RC5X */
+		data->wanted_bits = RC5X_NBITS;
+		decrease_duration(&ev, RC5_BIT_START);
+		goto again;
+
+	case STATE_BIT_START:
+		if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
+			break;
+
+		data->bits <<= 1;
+		if (!ev.pulse)
+			data->bits |= 1;
+		data->count++;
+		data->state = STATE_BIT_END;
+		return 0;
+
+	case STATE_BIT_END:
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+			break;
+
+		if (data->count == data->wanted_bits)
+			data->state = STATE_FINISHED;
+		else if (data->count == CHECK_RC5X_NBITS)
+			data->state = STATE_CHECK_RC5X;
+		else
+			data->state = STATE_BIT_START;
+
+		decrease_duration(&ev, RC5_BIT_END);
+		goto again;
+
+	case STATE_CHECK_RC5X:
+		if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
+			/* RC5X */
+			data->wanted_bits = RC5X_NBITS;
+			decrease_duration(&ev, RC5X_SPACE);
+		} else {
+			/* RC5 */
+			data->wanted_bits = RC5_NBITS;
+		}
+		data->state = STATE_BIT_START;
+		goto again;
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		if (data->wanted_bits == RC5X_NBITS) {
+			/* RC5X */
+			u8 xdata, command, system;
+			xdata    = (data->bits & 0x0003F) >> 0;
+			command  = (data->bits & 0x00FC0) >> 6;
+			system   = (data->bits & 0x1F000) >> 12;
+			toggle   = (data->bits & 0x20000) ? 1 : 0;
+			command += (data->bits & 0x01000) ? 0 : 0x40;
+			scancode = system << 16 | command << 8 | xdata;
+
+			IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
+				   scancode, toggle);
+
+		} else {
+			/* RC5 */
+			u8 command, system;
+			command  = (data->bits & 0x0003F) >> 0;
+			system   = (data->bits & 0x007C0) >> 6;
+			toggle   = (data->bits & 0x00800) ? 1 : 0;
+			command += (data->bits & 0x01000) ? 0 : 0x40;
+			scancode = system << 8 | command;
+
+			IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
+				   scancode, toggle);
+		}
+
+		ir_keydown(input_dev, scancode, toggle);
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler rc5_handler = {
+	.protocols	= IR_TYPE_RC5,
+	.decode		= ir_rc5_decode,
+};
+
+static int __init ir_rc5_decode_init(void)
+{
+	ir_raw_handler_register(&rc5_handler);
+
+	printk(KERN_INFO "IR RC5(x) protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_rc5_decode_exit(void)
+{
+	ir_raw_handler_unregister(&rc5_handler);
+}
+
+module_init(ir_rc5_decode_init);
+module_exit(ir_rc5_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("RC5(x) IR protocol decoder");
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
new file mode 100644
index 000000000000..7c413501a3f7
--- /dev/null
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -0,0 +1,154 @@
+/* ir-rc5-sz-decoder.c - handle RC5 Streamzap IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+/*
+ * This code handles the 15 bit RC5-ish protocol used by the Streamzap
+ * PC Remote.
+ * It considers a carrier of 36 kHz, with a total of 15 bits, where
+ * the first two bits are start bits, and a third one is a filing bit
+ */
+
+#include "ir-core-priv.h"
+
+#define RC5_SZ_NBITS		15
+#define RC5_UNIT		888888 /* ns */
+#define RC5_BIT_START		(1 * RC5_UNIT)
+#define RC5_BIT_END		(1 * RC5_UNIT)
+
+enum rc5_sz_state {
+	STATE_INACTIVE,
+	STATE_BIT_START,
+	STATE_BIT_END,
+	STATE_FINISHED,
+};
+
+/**
+ * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
+	u8 toggle, command, system;
+	u32 scancode;
+
+        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+                return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+		goto out;
+
+again:
+	IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+		return 0;
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		data->state = STATE_BIT_START;
+		data->count = 1;
+		data->wanted_bits = RC5_SZ_NBITS;
+		decrease_duration(&ev, RC5_BIT_START);
+		goto again;
+
+	case STATE_BIT_START:
+		if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
+			break;
+
+		data->bits <<= 1;
+		if (!ev.pulse)
+			data->bits |= 1;
+		data->count++;
+		data->state = STATE_BIT_END;
+		return 0;
+
+	case STATE_BIT_END:
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+			break;
+
+		if (data->count == data->wanted_bits)
+			data->state = STATE_FINISHED;
+		else
+			data->state = STATE_BIT_START;
+
+		decrease_duration(&ev, RC5_BIT_END);
+		goto again;
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		/* RC5-sz */
+		command  = (data->bits & 0x0003F) >> 0;
+		system   = (data->bits & 0x02FC0) >> 6;
+		toggle   = (data->bits & 0x01000) ? 1 : 0;
+		scancode = system << 6 | command;
+
+		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
+			   scancode, toggle);
+
+		ir_keydown(input_dev, scancode, toggle);
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler rc5_sz_handler = {
+	.protocols	= IR_TYPE_RC5_SZ,
+	.decode		= ir_rc5_sz_decode,
+};
+
+static int __init ir_rc5_sz_decode_init(void)
+{
+	ir_raw_handler_register(&rc5_sz_handler);
+
+	printk(KERN_INFO "IR RC5 (streamzap) protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_rc5_sz_decode_exit(void)
+{
+	ir_raw_handler_unregister(&rc5_sz_handler);
+}
+
+module_init(ir_rc5_sz_decode_init);
+module_exit(ir_rc5_sz_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("RC5 (streamzap) IR protocol decoder");
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
new file mode 100644
index 000000000000..d25da91f44ff
--- /dev/null
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -0,0 +1,281 @@
+/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "ir-core-priv.h"
+
+/*
+ * This decoder currently supports:
+ * RC6-0-16	(standard toggle bit in header)
+ * RC6-6A-24	(no toggle bit)
+ * RC6-6A-32	(MCE version with toggle bit in body)
+ */
+
+#define RC6_UNIT		444444	/* us */
+#define RC6_HEADER_NBITS	4	/* not including toggle bit */
+#define RC6_0_NBITS		16
+#define RC6_6A_SMALL_NBITS	24
+#define RC6_6A_LARGE_NBITS	32
+#define RC6_PREFIX_PULSE	(6 * RC6_UNIT)
+#define RC6_PREFIX_SPACE	(2 * RC6_UNIT)
+#define RC6_BIT_START		(1 * RC6_UNIT)
+#define RC6_BIT_END		(1 * RC6_UNIT)
+#define RC6_TOGGLE_START	(2 * RC6_UNIT)
+#define RC6_TOGGLE_END		(2 * RC6_UNIT)
+#define RC6_MODE_MASK		0x07	/* for the header bits */
+#define RC6_STARTBIT_MASK	0x08	/* for the header bits */
+#define RC6_6A_MCE_TOGGLE_MASK	0x8000	/* for the body bits */
+
+enum rc6_mode {
+	RC6_MODE_0,
+	RC6_MODE_6A,
+	RC6_MODE_UNKNOWN,
+};
+
+enum rc6_state {
+	STATE_INACTIVE,
+	STATE_PREFIX_SPACE,
+	STATE_HEADER_BIT_START,
+	STATE_HEADER_BIT_END,
+	STATE_TOGGLE_START,
+	STATE_TOGGLE_END,
+	STATE_BODY_BIT_START,
+	STATE_BODY_BIT_END,
+	STATE_FINISHED,
+};
+
+static enum rc6_mode rc6_mode(struct rc6_dec *data)
+{
+	switch (data->header & RC6_MODE_MASK) {
+	case 0:
+		return RC6_MODE_0;
+	case 6:
+		if (!data->toggle)
+			return RC6_MODE_6A;
+		/* fall through */
+	default:
+		return RC6_MODE_UNKNOWN;
+	}
+}
+
+/**
+ * ir_rc6_decode() - Decode one RC6 pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct rc6_dec *data = &ir_dev->raw->rc6;
+	u32 scancode;
+	u8 toggle;
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+		goto out;
+
+again:
+	IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+		return 0;
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		/* Note: larger margin on first pulse since each RC6_UNIT
+		   is quite short and some hardware takes some time to
+		   adjust to the signal */
+		if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
+			break;
+
+		data->state = STATE_PREFIX_SPACE;
+		data->count = 0;
+		return 0;
+
+	case STATE_PREFIX_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
+			break;
+
+		data->state = STATE_HEADER_BIT_START;
+		return 0;
+
+	case STATE_HEADER_BIT_START:
+		if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
+			break;
+
+		data->header <<= 1;
+		if (ev.pulse)
+			data->header |= 1;
+		data->count++;
+		data->state = STATE_HEADER_BIT_END;
+		return 0;
+
+	case STATE_HEADER_BIT_END:
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+			break;
+
+		if (data->count == RC6_HEADER_NBITS)
+			data->state = STATE_TOGGLE_START;
+		else
+			data->state = STATE_HEADER_BIT_START;
+
+		decrease_duration(&ev, RC6_BIT_END);
+		goto again;
+
+	case STATE_TOGGLE_START:
+		if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
+			break;
+
+		data->toggle = ev.pulse;
+		data->state = STATE_TOGGLE_END;
+		return 0;
+
+	case STATE_TOGGLE_END:
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
+		    !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
+			break;
+
+		if (!(data->header & RC6_STARTBIT_MASK)) {
+			IR_dprintk(1, "RC6 invalid start bit\n");
+			break;
+		}
+
+		data->state = STATE_BODY_BIT_START;
+		decrease_duration(&ev, RC6_TOGGLE_END);
+		data->count = 0;
+
+		switch (rc6_mode(data)) {
+		case RC6_MODE_0:
+			data->wanted_bits = RC6_0_NBITS;
+			break;
+		case RC6_MODE_6A:
+			/* This might look weird, but we basically
+			   check the value of the first body bit to
+			   determine the number of bits in mode 6A */
+			if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
+			    geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+				data->wanted_bits = RC6_6A_LARGE_NBITS;
+			else
+				data->wanted_bits = RC6_6A_SMALL_NBITS;
+			break;
+		default:
+			IR_dprintk(1, "RC6 unknown mode\n");
+			goto out;
+		}
+		goto again;
+
+	case STATE_BODY_BIT_START:
+		if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
+			break;
+
+		data->body <<= 1;
+		if (ev.pulse)
+			data->body |= 1;
+		data->count++;
+		data->state = STATE_BODY_BIT_END;
+		return 0;
+
+	case STATE_BODY_BIT_END:
+		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+			break;
+
+		if (data->count == data->wanted_bits)
+			data->state = STATE_FINISHED;
+		else
+			data->state = STATE_BODY_BIT_START;
+
+		decrease_duration(&ev, RC6_BIT_END);
+		goto again;
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		switch (rc6_mode(data)) {
+		case RC6_MODE_0:
+			scancode = data->body & 0xffff;
+			toggle = data->toggle;
+			IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
+				   scancode, toggle);
+			break;
+		case RC6_MODE_6A:
+			if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
+				toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
+				scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
+			} else {
+				toggle = 0;
+				scancode = data->body & 0xffffff;
+			}
+
+			IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
+				   scancode, toggle);
+			break;
+		default:
+			IR_dprintk(1, "RC6 unknown mode\n");
+			goto out;
+		}
+
+		ir_keydown(input_dev, scancode, toggle);
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler rc6_handler = {
+	.protocols	= IR_TYPE_RC6,
+	.decode		= ir_rc6_decode,
+};
+
+static int __init ir_rc6_decode_init(void)
+{
+	ir_raw_handler_register(&rc6_handler);
+
+	printk(KERN_INFO "IR RC6 protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_rc6_decode_exit(void)
+{
+	ir_raw_handler_unregister(&rc6_handler);
+}
+
+module_init(ir_rc6_decode_init);
+module_exit(ir_rc6_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("RC6 IR protocol decoder");
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
new file mode 100644
index 000000000000..2d15730822bc
--- /dev/null
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -0,0 +1,182 @@
+/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define SONY_UNIT		600000 /* ns */
+#define SONY_HEADER_PULSE	(4 * SONY_UNIT)
+#define	SONY_HEADER_SPACE	(1 * SONY_UNIT)
+#define SONY_BIT_0_PULSE	(1 * SONY_UNIT)
+#define SONY_BIT_1_PULSE	(2 * SONY_UNIT)
+#define SONY_BIT_SPACE		(1 * SONY_UNIT)
+#define SONY_TRAILER_SPACE	(10 * SONY_UNIT) /* minimum */
+
+enum sony_state {
+	STATE_INACTIVE,
+	STATE_HEADER_SPACE,
+	STATE_BIT_PULSE,
+	STATE_BIT_SPACE,
+	STATE_FINISHED,
+};
+
+/**
+ * ir_sony_decode() - Decode one Sony pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @ev:         the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct sony_dec *data = &ir_dev->raw->sony;
+	u32 scancode;
+	u8 device, subdevice, function;
+
+	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
+		goto out;
+
+	IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
+			break;
+
+		data->count = 0;
+		data->state = STATE_HEADER_SPACE;
+		return 0;
+
+	case STATE_HEADER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_PULSE;
+		return 0;
+
+	case STATE_BIT_PULSE:
+		if (!ev.pulse)
+			break;
+
+		data->bits <<= 1;
+		if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
+			data->bits |= 1;
+		else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
+			break;
+
+		data->count++;
+		data->state = STATE_BIT_SPACE;
+		return 0;
+
+	case STATE_BIT_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
+			break;
+
+		decrease_duration(&ev, SONY_BIT_SPACE);
+
+		if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
+			data->state = STATE_BIT_PULSE;
+			return 0;
+		}
+
+		data->state = STATE_FINISHED;
+		/* Fall through */
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
+			break;
+
+		switch (data->count) {
+		case 12:
+			device    = bitrev8((data->bits <<  3) & 0xF8);
+			subdevice = 0;
+			function  = bitrev8((data->bits >>  4) & 0xFE);
+			break;
+		case 15:
+			device    = bitrev8((data->bits >>  0) & 0xFF);
+			subdevice = 0;
+			function  = bitrev8((data->bits >>  7) & 0xFD);
+			break;
+		case 20:
+			device    = bitrev8((data->bits >>  5) & 0xF8);
+			subdevice = bitrev8((data->bits >>  0) & 0xFF);
+			function  = bitrev8((data->bits >> 12) & 0xFE);
+			break;
+		default:
+			IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
+			goto out;
+		}
+
+		scancode = device << 16 | subdevice << 8 | function;
+		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
+		ir_keydown(input_dev, scancode, 0);
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static struct ir_raw_handler sony_handler = {
+	.protocols	= IR_TYPE_SONY,
+	.decode		= ir_sony_decode,
+};
+
+static int __init ir_sony_decode_init(void)
+{
+	ir_raw_handler_register(&sony_handler);
+
+	printk(KERN_INFO "IR Sony protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_sony_decode_exit(void)
+{
+	ir_raw_handler_unregister(&sony_handler);
+}
+
+module_init(ir_sony_decode_init);
+module_exit(ir_sony_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Sony IR protocol decoder");
diff --git a/drivers/media/rc/ir-sysfs.c b/drivers/media/rc/ir-sysfs.c
new file mode 100644
index 000000000000..38423a8da871
--- /dev/null
+++ b/drivers/media/rc/ir-sysfs.c
@@ -0,0 +1,362 @@
+/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include "ir-core-priv.h"
+
+#define IRRCV_NUM_DEVICES	256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+	.name		= "rc",
+	.devnode	= ir_devnode,
+};
+
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ IR_TYPE_UNKNOWN,	"unknown"	},
+	{ IR_TYPE_RC5,		"rc-5"		},
+	{ IR_TYPE_NEC,		"nec"		},
+	{ IR_TYPE_RC6,		"rc-6"		},
+	{ IR_TYPE_JVC,		"jvc"		},
+	{ IR_TYPE_SONY,		"sony"		},
+	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ IR_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *d,
+			      struct device_attribute *mattr, char *buf)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	u64 allowed, enabled;
+	char *tmp = buf;
+	int i;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = ir_dev->rc_tab.ir_type;
+		allowed = ir_dev->props->allowed_protos;
+	} else if (ir_dev->raw) {
+		enabled = ir_dev->raw->enabled_protocols;
+		allowed = ir_raw_get_allowed_protocols();
+	} else
+		return sprintf(tmp, "[builtin]\n");
+
+	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+		   (long long)allowed,
+		   (long long)enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
+
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+	return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *d,
+			       struct device_attribute *mattr,
+			       const char *data,
+			       size_t len)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	bool enable, disable;
+	const char *tmp;
+	u64 type;
+	u64 mask;
+	int rc, i, count = 0;
+	unsigned long flags;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+		type = ir_dev->rc_tab.ir_type;
+	else if (ir_dev->raw)
+		type = ir_dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
+
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
+
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
+	}
+
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
+		return -EINVAL;
+	}
+
+	if (ir_dev->props && ir_dev->props->change_protocol) {
+		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+						    type);
+		if (rc < 0) {
+			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+				   (long long)type);
+			return -EINVAL;
+		}
+	}
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+		ir_dev->rc_tab.ir_type = type;
+		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	} else {
+		ir_dev->raw->enabled_protocols = type;
+	}
+
+	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+		   (long long)type);
+
+	return len;
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...)					\
+	do {								\
+		int err = add_uevent_var(env, fmt, val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+
+	if (ir_dev->rc_tab.name)
+		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
+	if (ir_dev->driver_name)
+		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+
+	return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+		   show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+	&dev_attr_protocols.attr,
+	NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+	.attrs	= rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+	&rc_dev_attr_grp,
+	NULL
+};
+
+static struct device_type rc_dev_type = {
+	.groups		= rc_dev_attr_groups,
+	.uevent		= rc_dev_uevent,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+int ir_register_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int devno = find_first_zero_bit(&ir_core_dev_number,
+					IRRCV_NUM_DEVICES);
+
+	if (unlikely(devno < 0))
+		return devno;
+
+	ir_dev->dev.type = &rc_dev_type;
+	ir_dev->devno = devno;
+
+	ir_dev->dev.class = &ir_input_class;
+	ir_dev->dev.parent = input_dev->dev.parent;
+	input_dev->dev.parent = &ir_dev->dev;
+	dev_set_name(&ir_dev->dev, "rc%d", devno);
+	dev_set_drvdata(&ir_dev->dev, ir_dev);
+	return  device_register(&ir_dev->dev);
+};
+
+/**
+ * ir_register_input - registers ir input device with input subsystem
+ * @input_dev:	the struct input_dev descriptor of the device
+ */
+
+int ir_register_input(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int rc;
+	const char *path;
+
+
+	rc = input_register_device(input_dev);
+	if (rc < 0) {
+		device_del(&ir_dev->dev);
+		return rc;
+	}
+
+	__module_get(THIS_MODULE);
+
+	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+	printk(KERN_INFO "%s: %s as %s\n",
+		dev_name(&ir_dev->dev),
+		input_dev->name ? input_dev->name : "Unspecified device",
+		path ? path : "N/A");
+	kfree(path);
+
+	set_bit(ir_dev->devno, &ir_core_dev_number);
+	return 0;
+}
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ *			   /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+void ir_unregister_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	input_set_drvdata(input_dev, NULL);
+	clear_bit(ir_dev->devno, &ir_core_dev_number);
+	input_unregister_device(input_dev);
+	device_del(&ir_dev->dev);
+
+	module_put(THIS_MODULE);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init ir_core_init(void)
+{
+	int rc = class_register(&ir_input_class);
+	if (rc) {
+		printk(KERN_ERR "ir_core: unable to register rc class\n");
+		return rc;
+	}
+
+	/* Initialize/load the decoders/keymap code that will be used */
+	ir_raw_init();
+	ir_rcmap_init();
+
+	return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
new file mode 100644
index 000000000000..14b22f58f823
--- /dev/null
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -0,0 +1,15 @@
+config RC_MAP
+	tristate "Compile Remote Controller keymap modules"
+	depends on IR_CORE
+	default y
+
+	---help---
+	   This option enables the compilation of lots of Remote
+	   Controller tables. They are short tables, but if you
+	   don't use a remote controller, or prefer to load the
+	   tables on userspace, you should disable it.
+
+	   The ir-keytable program, available at v4l-utils package
+	   provide the tool and the same RC maps for load from
+	   userspace. Its available at
+			http://git.linuxtv.org/v4l-utils
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
new file mode 100644
index 000000000000..3194d391bbd4
--- /dev/null
+++ b/drivers/media/rc/keymaps/Makefile
@@ -0,0 +1,86 @@
+obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
+			rc-alink-dtu-m.o \
+			rc-anysee.o \
+			rc-apac-viewcomp.o \
+			rc-asus-pc39.o \
+			rc-ati-tv-wonder-hd-600.o \
+			rc-avermedia-a16d.o \
+			rc-avermedia.o \
+			rc-avermedia-cardbus.o \
+			rc-avermedia-dvbt.o \
+			rc-avermedia-m135a.o \
+			rc-avermedia-m733a-rm-k6.o \
+			rc-avermedia-rm-ks.o \
+			rc-avertv-303.o \
+			rc-azurewave-ad-tu700.o \
+			rc-behold.o \
+			rc-behold-columbus.o \
+			rc-budget-ci-old.o \
+			rc-cinergy-1400.o \
+			rc-cinergy.o \
+			rc-dib0700-nec.o \
+			rc-dib0700-rc5.o \
+			rc-digitalnow-tinytwin.o \
+			rc-digittrade.o \
+			rc-dm1105-nec.o \
+			rc-dntv-live-dvb-t.o \
+			rc-dntv-live-dvbt-pro.o \
+			rc-em-terratec.o \
+			rc-encore-enltv2.o \
+			rc-encore-enltv.o \
+			rc-encore-enltv-fm53.o \
+			rc-evga-indtube.o \
+			rc-eztv.o \
+			rc-flydvb.o \
+			rc-flyvideo.o \
+			rc-fusionhdtv-mce.o \
+			rc-gadmei-rm008z.o \
+			rc-genius-tvgo-a11mce.o \
+			rc-gotview7135.o \
+			rc-hauppauge-new.o \
+			rc-imon-mce.o \
+			rc-imon-pad.o \
+			rc-iodata-bctv7e.o \
+			rc-kaiomy.o \
+			rc-kworld-315u.o \
+			rc-kworld-plus-tv-analog.o \
+			rc-leadtek-y04g0051.o \
+			rc-lirc.o \
+			rc-lme2510.o \
+			rc-manli.o \
+			rc-msi-digivox-ii.o \
+			rc-msi-digivox-iii.o \
+			rc-msi-tvanywhere.o \
+			rc-msi-tvanywhere-plus.o \
+			rc-nebula.o \
+			rc-nec-terratec-cinergy-xs.o \
+			rc-norwood.o \
+			rc-npgtech.o \
+			rc-pctv-sedna.o \
+			rc-pinnacle-color.o \
+			rc-pinnacle-grey.o \
+			rc-pinnacle-pctv-hd.o \
+			rc-pixelview.o \
+			rc-pixelview-mk12.o \
+			rc-pixelview-new.o \
+			rc-powercolor-real-angel.o \
+			rc-proteus-2309.o \
+			rc-purpletv.o \
+			rc-pv951.o \
+			rc-rc5-hauppauge-new.o \
+			rc-rc5-tv.o \
+			rc-rc6-mce.o \
+			rc-real-audio-220-32-keys.o \
+			rc-streamzap.o \
+			rc-tbs-nec.o \
+			rc-terratec-cinergy-xs.o \
+			rc-terratec-slim.o \
+			rc-tevii-nec.o \
+			rc-total-media-in-hand.o \
+			rc-trekstor.o \
+			rc-tt-1500.o \
+			rc-twinhan1027.o \
+			rc-videomate-s350.o \
+			rc-videomate-tv-pvr.o \
+			rc-winfast.o \
+			rc-winfast-usbii-deluxe.o
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
new file mode 100644
index 000000000000..b17283176ecd
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -0,0 +1,89 @@
+/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* ADS Tech Instant TV DVB-T PCI Remote */
+
+static struct ir_scancode adstech_dvb_t_pci[] = {
+	/* Keys 0 to 9 */
+	{ 0x4d, KEY_0 },
+	{ 0x57, KEY_1 },
+	{ 0x4f, KEY_2 },
+	{ 0x53, KEY_3 },
+	{ 0x56, KEY_4 },
+	{ 0x4e, KEY_5 },
+	{ 0x5e, KEY_6 },
+	{ 0x54, KEY_7 },
+	{ 0x4c, KEY_8 },
+	{ 0x5c, KEY_9 },
+
+	{ 0x5b, KEY_POWER },
+	{ 0x5f, KEY_MUTE },
+	{ 0x55, KEY_GOTO },
+	{ 0x5d, KEY_SEARCH },
+	{ 0x17, KEY_EPG },		/* Guide */
+	{ 0x1f, KEY_MENU },
+	{ 0x0f, KEY_UP },
+	{ 0x46, KEY_DOWN },
+	{ 0x16, KEY_LEFT },
+	{ 0x1e, KEY_RIGHT },
+	{ 0x0e, KEY_SELECT },		/* Enter */
+	{ 0x5a, KEY_INFO },
+	{ 0x52, KEY_EXIT },
+	{ 0x59, KEY_PREVIOUS },
+	{ 0x51, KEY_NEXT },
+	{ 0x58, KEY_REWIND },
+	{ 0x50, KEY_FORWARD },
+	{ 0x44, KEY_PLAYPAUSE },
+	{ 0x07, KEY_STOP },
+	{ 0x1b, KEY_RECORD },
+	{ 0x13, KEY_TUNER },		/* Live */
+	{ 0x0a, KEY_A },
+	{ 0x12, KEY_B },
+	{ 0x03, KEY_PROG1 },		/* 1 */
+	{ 0x01, KEY_PROG2 },		/* 2 */
+	{ 0x00, KEY_PROG3 },		/* 3 */
+	{ 0x06, KEY_DVD },
+	{ 0x48, KEY_AUX },		/* Photo */
+	{ 0x40, KEY_VIDEO },
+	{ 0x19, KEY_AUDIO },		/* Music */
+	{ 0x0b, KEY_CHANNELUP },
+	{ 0x08, KEY_CHANNELDOWN },
+	{ 0x15, KEY_VOLUMEUP },
+	{ 0x1c, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap adstech_dvb_t_pci_map = {
+	.map = {
+		.scan    = adstech_dvb_t_pci,
+		.size    = ARRAY_SIZE(adstech_dvb_t_pci),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_ADSTECH_DVB_T_PCI,
+	}
+};
+
+static int __init init_rc_map_adstech_dvb_t_pci(void)
+{
+	return ir_register_map(&adstech_dvb_t_pci_map);
+}
+
+static void __exit exit_rc_map_adstech_dvb_t_pci(void)
+{
+	ir_unregister_map(&adstech_dvb_t_pci_map);
+}
+
+module_init(init_rc_map_adstech_dvb_t_pci)
+module_exit(exit_rc_map_adstech_dvb_t_pci)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
new file mode 100644
index 000000000000..ddfee7f8093d
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -0,0 +1,68 @@
+/*
+ * A-Link DTU(m) remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
+static struct ir_scancode alink_dtu_m[] = {
+	{ 0x0800, KEY_VOLUMEUP },
+	{ 0x0801, KEY_1 },
+	{ 0x0802, KEY_3 },
+	{ 0x0803, KEY_7 },
+	{ 0x0804, KEY_9 },
+	{ 0x0805, KEY_NEW },             /* symbol: PIP */
+	{ 0x0806, KEY_0 },
+	{ 0x0807, KEY_CHANNEL },         /* JUMP */
+	{ 0x080d, KEY_5 },
+	{ 0x080f, KEY_2 },
+	{ 0x0812, KEY_POWER2 },
+	{ 0x0814, KEY_CHANNELUP },
+	{ 0x0816, KEY_VOLUMEDOWN },
+	{ 0x0818, KEY_6 },
+	{ 0x081a, KEY_MUTE },
+	{ 0x081b, KEY_8 },
+	{ 0x081c, KEY_4 },
+	{ 0x081d, KEY_CHANNELDOWN },
+};
+
+static struct rc_keymap alink_dtu_m_map = {
+	.map = {
+		.scan    = alink_dtu_m,
+		.size    = ARRAY_SIZE(alink_dtu_m),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_ALINK_DTU_M,
+	}
+};
+
+static int __init init_rc_map_alink_dtu_m(void)
+{
+	return ir_register_map(&alink_dtu_m_map);
+}
+
+static void __exit exit_rc_map_alink_dtu_m(void)
+{
+	ir_unregister_map(&alink_dtu_m_map);
+}
+
+module_init(init_rc_map_alink_dtu_m)
+module_exit(exit_rc_map_alink_dtu_m)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
new file mode 100644
index 000000000000..30d70498cfed
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -0,0 +1,93 @@
+/*
+ * Anysee remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode anysee[] = {
+	{ 0x0800, KEY_0 },
+	{ 0x0801, KEY_1 },
+	{ 0x0802, KEY_2 },
+	{ 0x0803, KEY_3 },
+	{ 0x0804, KEY_4 },
+	{ 0x0805, KEY_5 },
+	{ 0x0806, KEY_6 },
+	{ 0x0807, KEY_7 },
+	{ 0x0808, KEY_8 },
+	{ 0x0809, KEY_9 },
+	{ 0x080a, KEY_POWER2 },          /* [red power button] */
+	{ 0x080b, KEY_VIDEO },           /* [*] MODE */
+	{ 0x080c, KEY_CHANNEL },         /* [symbol counterclockwise arrow] */
+	{ 0x080d, KEY_NEXT },            /* [>>|] */
+	{ 0x080e, KEY_MENU },            /* MENU */
+	{ 0x080f, KEY_EPG },             /* [EPG] */
+	{ 0x0810, KEY_CLEAR },           /* EXIT */
+	{ 0x0811, KEY_CHANNELUP },
+	{ 0x0812, KEY_VOLUMEDOWN },
+	{ 0x0813, KEY_VOLUMEUP },
+	{ 0x0814, KEY_CHANNELDOWN },
+	{ 0x0815, KEY_OK },
+	{ 0x0816, KEY_RADIO },           /* [symbol TV/radio] */
+	{ 0x0817, KEY_INFO },            /* [i] */
+	{ 0x0818, KEY_PREVIOUS },        /* [|<<] */
+	{ 0x0819, KEY_FAVORITES },       /* FAV. */
+	{ 0x081a, KEY_SUBTITLE },        /* Subtitle */
+	{ 0x081b, KEY_CAMERA },          /* [symbol camera] */
+	{ 0x081c, KEY_YELLOW },
+	{ 0x081d, KEY_RED },
+	{ 0x081e, KEY_LANGUAGE },        /* [symbol Second Audio Program] */
+	{ 0x081f, KEY_GREEN },
+	{ 0x0820, KEY_SLEEP },           /* Sleep */
+	{ 0x0821, KEY_SCREEN },          /* 16:9 / 4:3 */
+	{ 0x0822, KEY_ZOOM },            /* SIZE */
+	{ 0x0824, KEY_FN },              /* [F1] */
+	{ 0x0825, KEY_FN },              /* [F2] */
+	{ 0x0842, KEY_MUTE },            /* symbol mute */
+	{ 0x0844, KEY_BLUE },
+	{ 0x0847, KEY_TEXT },            /* TEXT */
+	{ 0x0848, KEY_STOP },
+	{ 0x0849, KEY_RECORD },
+	{ 0x0850, KEY_PLAY },
+	{ 0x0851, KEY_PAUSE },
+};
+
+static struct rc_keymap anysee_map = {
+	.map = {
+		.scan    = anysee,
+		.size    = ARRAY_SIZE(anysee),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_ANYSEE,
+	}
+};
+
+static int __init init_rc_map_anysee(void)
+{
+	return ir_register_map(&anysee_map);
+}
+
+static void __exit exit_rc_map_anysee(void)
+{
+	ir_unregister_map(&anysee_map);
+}
+
+module_init(init_rc_map_anysee)
+module_exit(exit_rc_map_anysee)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
new file mode 100644
index 000000000000..0ef2b562baf0
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -0,0 +1,80 @@
+/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Attila Kondoros <attila.kondoros@chello.hu> */
+
+static struct ir_scancode apac_viewcomp[] = {
+
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+	{ 0x00, KEY_0 },
+	{ 0x17, KEY_LAST },		/* +100 */
+	{ 0x0a, KEY_LIST },		/* recall */
+
+
+	{ 0x1c, KEY_TUNER },		/* TV/FM */
+	{ 0x15, KEY_SEARCH },		/* scan */
+	{ 0x12, KEY_POWER },		/* power */
+	{ 0x1f, KEY_VOLUMEDOWN },	/* vol up */
+	{ 0x1b, KEY_VOLUMEUP },		/* vol down */
+	{ 0x1e, KEY_CHANNELDOWN },	/* chn up */
+	{ 0x1a, KEY_CHANNELUP },	/* chn down */
+
+	{ 0x11, KEY_VIDEO },		/* video */
+	{ 0x0f, KEY_ZOOM },		/* full screen */
+	{ 0x13, KEY_MUTE },		/* mute/unmute */
+	{ 0x10, KEY_TEXT },		/* min */
+
+	{ 0x0d, KEY_STOP },		/* freeze */
+	{ 0x0e, KEY_RECORD },		/* record */
+	{ 0x1d, KEY_PLAYPAUSE },	/* stop */
+	{ 0x19, KEY_PLAY },		/* play */
+
+	{ 0x16, KEY_GOTO },		/* osd */
+	{ 0x14, KEY_REFRESH },		/* default */
+	{ 0x0c, KEY_KPPLUS },		/* fine tune >>>> */
+	{ 0x18, KEY_KPMINUS },		/* fine tune <<<< */
+};
+
+static struct rc_keymap apac_viewcomp_map = {
+	.map = {
+		.scan    = apac_viewcomp,
+		.size    = ARRAY_SIZE(apac_viewcomp),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_APAC_VIEWCOMP,
+	}
+};
+
+static int __init init_rc_map_apac_viewcomp(void)
+{
+	return ir_register_map(&apac_viewcomp_map);
+}
+
+static void __exit exit_rc_map_apac_viewcomp(void)
+{
+	ir_unregister_map(&apac_viewcomp_map);
+}
+
+module_init(init_rc_map_apac_viewcomp)
+module_exit(exit_rc_map_apac_viewcomp)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
new file mode 100644
index 000000000000..2996e0a3b8d5
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -0,0 +1,91 @@
+/* asus-pc39.h - Keytable for asus_pc39 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Marc Fargas <telenieko@telenieko.com>
+ * this is the remote control that comes with the asus p7131
+ * which has a label saying is "Model PC-39"
+ */
+
+static struct ir_scancode asus_pc39[] = {
+	/* Keys 0 to 9 */
+	{ 0x082a, KEY_0 },
+	{ 0x0816, KEY_1 },
+	{ 0x0812, KEY_2 },
+	{ 0x0814, KEY_3 },
+	{ 0x0836, KEY_4 },
+	{ 0x0832, KEY_5 },
+	{ 0x0834, KEY_6 },
+	{ 0x080e, KEY_7 },
+	{ 0x080a, KEY_8 },
+	{ 0x080c, KEY_9 },
+
+	{ 0x0801, KEY_RADIO },		/* radio */
+	{ 0x083c, KEY_MENU },		/* dvd/menu */
+	{ 0x0815, KEY_VOLUMEUP },
+	{ 0x0826, KEY_VOLUMEDOWN },
+	{ 0x0808, KEY_UP },
+	{ 0x0804, KEY_DOWN },
+	{ 0x0818, KEY_LEFT },
+	{ 0x0810, KEY_RIGHT },
+	{ 0x081a, KEY_VIDEO },		/* video */
+	{ 0x0806, KEY_AUDIO },		/* music */
+
+	{ 0x081e, KEY_TV },		/* tv */
+	{ 0x0822, KEY_EXIT },		/* back */
+	{ 0x0835, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x0824, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x0825, KEY_ENTER },		/* enter */
+
+	{ 0x0839, KEY_PAUSE },		/* play/pause */
+	{ 0x0821, KEY_PREVIOUS },		/* rew */
+	{ 0x0819, KEY_NEXT },		/* forward */
+	{ 0x0831, KEY_REWIND },		/* backward << */
+	{ 0x0805, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x0809, KEY_STOP },
+	{ 0x0811, KEY_RECORD },		/* recording */
+	{ 0x0829, KEY_POWER },		/* the button that reads "close" */
+
+	{ 0x082e, KEY_ZOOM },		/* full screen */
+	{ 0x082c, KEY_MACRO },		/* recall */
+	{ 0x081c, KEY_HOME },		/* home */
+	{ 0x083a, KEY_PVR },		/* picture */
+	{ 0x0802, KEY_MUTE },		/* mute */
+	{ 0x083e, KEY_DVD },		/* dvd */
+};
+
+static struct rc_keymap asus_pc39_map = {
+	.map = {
+		.scan    = asus_pc39,
+		.size    = ARRAY_SIZE(asus_pc39),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_ASUS_PC39,
+	}
+};
+
+static int __init init_rc_map_asus_pc39(void)
+{
+	return ir_register_map(&asus_pc39_map);
+}
+
+static void __exit exit_rc_map_asus_pc39(void)
+{
+	ir_unregister_map(&asus_pc39_map);
+}
+
+module_init(init_rc_map_asus_pc39)
+module_exit(exit_rc_map_asus_pc39)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
new file mode 100644
index 000000000000..8edfd293d010
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -0,0 +1,69 @@
+/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* ATI TV Wonder HD 600 USB
+   Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+
+static struct ir_scancode ati_tv_wonder_hd_600[] = {
+	{ 0x00, KEY_RECORD},		/* Row 1 */
+	{ 0x01, KEY_PLAYPAUSE},
+	{ 0x02, KEY_STOP},
+	{ 0x03, KEY_POWER},
+	{ 0x04, KEY_PREVIOUS},	/* Row 2 */
+	{ 0x05, KEY_REWIND},
+	{ 0x06, KEY_FORWARD},
+	{ 0x07, KEY_NEXT},
+	{ 0x08, KEY_EPG},		/* Row 3 */
+	{ 0x09, KEY_HOME},
+	{ 0x0a, KEY_MENU},
+	{ 0x0b, KEY_CHANNELUP},
+	{ 0x0c, KEY_BACK},		/* Row 4 */
+	{ 0x0d, KEY_UP},
+	{ 0x0e, KEY_INFO},
+	{ 0x0f, KEY_CHANNELDOWN},
+	{ 0x10, KEY_LEFT},		/* Row 5 */
+	{ 0x11, KEY_SELECT},
+	{ 0x12, KEY_RIGHT},
+	{ 0x13, KEY_VOLUMEUP},
+	{ 0x14, KEY_LAST},		/* Row 6 */
+	{ 0x15, KEY_DOWN},
+	{ 0x16, KEY_MUTE},
+	{ 0x17, KEY_VOLUMEDOWN},
+};
+
+static struct rc_keymap ati_tv_wonder_hd_600_map = {
+	.map = {
+		.scan    = ati_tv_wonder_hd_600,
+		.size    = ARRAY_SIZE(ati_tv_wonder_hd_600),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_ATI_TV_WONDER_HD_600,
+	}
+};
+
+static int __init init_rc_map_ati_tv_wonder_hd_600(void)
+{
+	return ir_register_map(&ati_tv_wonder_hd_600_map);
+}
+
+static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
+{
+	ir_unregister_map(&ati_tv_wonder_hd_600_map);
+}
+
+module_init(init_rc_map_ati_tv_wonder_hd_600)
+module_exit(exit_rc_map_ati_tv_wonder_hd_600)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
new file mode 100644
index 000000000000..12f043587f2e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -0,0 +1,75 @@
+/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode avermedia_a16d[] = {
+	{ 0x20, KEY_LIST},
+	{ 0x00, KEY_POWER},
+	{ 0x28, KEY_1},
+	{ 0x18, KEY_2},
+	{ 0x38, KEY_3},
+	{ 0x24, KEY_4},
+	{ 0x14, KEY_5},
+	{ 0x34, KEY_6},
+	{ 0x2c, KEY_7},
+	{ 0x1c, KEY_8},
+	{ 0x3c, KEY_9},
+	{ 0x12, KEY_SUBTITLE},
+	{ 0x22, KEY_0},
+	{ 0x32, KEY_REWIND},
+	{ 0x3a, KEY_SHUFFLE},
+	{ 0x02, KEY_PRINT},
+	{ 0x11, KEY_CHANNELDOWN},
+	{ 0x31, KEY_CHANNELUP},
+	{ 0x0c, KEY_ZOOM},
+	{ 0x1e, KEY_VOLUMEDOWN},
+	{ 0x3e, KEY_VOLUMEUP},
+	{ 0x0a, KEY_MUTE},
+	{ 0x04, KEY_AUDIO},
+	{ 0x26, KEY_RECORD},
+	{ 0x06, KEY_PLAY},
+	{ 0x36, KEY_STOP},
+	{ 0x16, KEY_PAUSE},
+	{ 0x2e, KEY_REWIND},
+	{ 0x0e, KEY_FASTFORWARD},
+	{ 0x30, KEY_TEXT},
+	{ 0x21, KEY_GREEN},
+	{ 0x01, KEY_BLUE},
+	{ 0x08, KEY_EPG},
+	{ 0x2a, KEY_MENU},
+};
+
+static struct rc_keymap avermedia_a16d_map = {
+	.map = {
+		.scan    = avermedia_a16d,
+		.size    = ARRAY_SIZE(avermedia_a16d),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_AVERMEDIA_A16D,
+	}
+};
+
+static int __init init_rc_map_avermedia_a16d(void)
+{
+	return ir_register_map(&avermedia_a16d_map);
+}
+
+static void __exit exit_rc_map_avermedia_a16d(void)
+{
+	ir_unregister_map(&avermedia_a16d_map);
+}
+
+module_init(init_rc_map_avermedia_a16d)
+module_exit(exit_rc_map_avermedia_a16d)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
new file mode 100644
index 000000000000..2a945b02e8ca
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -0,0 +1,97 @@
+/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
+
+static struct ir_scancode avermedia_cardbus[] = {
+	{ 0x00, KEY_POWER },
+	{ 0x01, KEY_TUNER },		/* TV/FM */
+	{ 0x03, KEY_TEXT },		/* Teletext */
+	{ 0x04, KEY_EPG },
+	{ 0x05, KEY_1 },
+	{ 0x06, KEY_2 },
+	{ 0x07, KEY_3 },
+	{ 0x08, KEY_AUDIO },
+	{ 0x09, KEY_4 },
+	{ 0x0a, KEY_5 },
+	{ 0x0b, KEY_6 },
+	{ 0x0c, KEY_ZOOM },		/* Full screen */
+	{ 0x0d, KEY_7 },
+	{ 0x0e, KEY_8 },
+	{ 0x0f, KEY_9 },
+	{ 0x10, KEY_PAGEUP },		/* 16-CH PREV */
+	{ 0x11, KEY_0 },
+	{ 0x12, KEY_INFO },
+	{ 0x13, KEY_AGAIN },		/* CH RTN - channel return */
+	{ 0x14, KEY_MUTE },
+	{ 0x15, KEY_EDIT },		/* Autoscan */
+	{ 0x17, KEY_SAVE },		/* Screenshot */
+	{ 0x18, KEY_PLAYPAUSE },
+	{ 0x19, KEY_RECORD },
+	{ 0x1a, KEY_PLAY },
+	{ 0x1b, KEY_STOP },
+	{ 0x1c, KEY_FASTFORWARD },
+	{ 0x1d, KEY_REWIND },
+	{ 0x1e, KEY_VOLUMEDOWN },
+	{ 0x1f, KEY_VOLUMEUP },
+	{ 0x22, KEY_SLEEP },		/* Sleep */
+	{ 0x23, KEY_ZOOM },		/* Aspect */
+	{ 0x26, KEY_SCREEN },		/* Pos */
+	{ 0x27, KEY_ANGLE },		/* Size */
+	{ 0x28, KEY_SELECT },		/* Select */
+	{ 0x29, KEY_BLUE },		/* Blue/Picture */
+	{ 0x2a, KEY_BACKSPACE },	/* Back */
+	{ 0x2b, KEY_MEDIA },		/* PIP (Picture-in-picture) */
+	{ 0x2c, KEY_DOWN },
+	{ 0x2e, KEY_DOT },
+	{ 0x2f, KEY_TV },		/* Live TV */
+	{ 0x32, KEY_LEFT },
+	{ 0x33, KEY_CLEAR },		/* Clear */
+	{ 0x35, KEY_RED },		/* Red/TV */
+	{ 0x36, KEY_UP },
+	{ 0x37, KEY_HOME },		/* Home */
+	{ 0x39, KEY_GREEN },		/* Green/Video */
+	{ 0x3d, KEY_YELLOW },		/* Yellow/Music */
+	{ 0x3e, KEY_OK },		/* Ok */
+	{ 0x3f, KEY_RIGHT },
+	{ 0x40, KEY_NEXT },		/* Next */
+	{ 0x41, KEY_PREVIOUS },		/* Previous */
+	{ 0x42, KEY_CHANNELDOWN },	/* Channel down */
+	{ 0x43, KEY_CHANNELUP },	/* Channel up */
+};
+
+static struct rc_keymap avermedia_cardbus_map = {
+	.map = {
+		.scan    = avermedia_cardbus,
+		.size    = ARRAY_SIZE(avermedia_cardbus),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_AVERMEDIA_CARDBUS,
+	}
+};
+
+static int __init init_rc_map_avermedia_cardbus(void)
+{
+	return ir_register_map(&avermedia_cardbus_map);
+}
+
+static void __exit exit_rc_map_avermedia_cardbus(void)
+{
+	ir_unregister_map(&avermedia_cardbus_map);
+}
+
+module_init(init_rc_map_avermedia_cardbus)
+module_exit(exit_rc_map_avermedia_cardbus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
new file mode 100644
index 000000000000..39dde6222875
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -0,0 +1,78 @@
+/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Matt Jesson <dvb@jesson.eclipse.co.uk */
+
+static struct ir_scancode avermedia_dvbt[] = {
+	{ 0x28, KEY_0 },		/* '0' / 'enter' */
+	{ 0x22, KEY_1 },		/* '1' */
+	{ 0x12, KEY_2 },		/* '2' / 'up arrow' */
+	{ 0x32, KEY_3 },		/* '3' */
+	{ 0x24, KEY_4 },		/* '4' / 'left arrow' */
+	{ 0x14, KEY_5 },		/* '5' */
+	{ 0x34, KEY_6 },		/* '6' / 'right arrow' */
+	{ 0x26, KEY_7 },		/* '7' */
+	{ 0x16, KEY_8 },		/* '8' / 'down arrow' */
+	{ 0x36, KEY_9 },		/* '9' */
+
+	{ 0x20, KEY_LIST },		/* 'source' */
+	{ 0x10, KEY_TEXT },		/* 'teletext' */
+	{ 0x00, KEY_POWER },		/* 'power' */
+	{ 0x04, KEY_AUDIO },		/* 'audio' */
+	{ 0x06, KEY_ZOOM },		/* 'full screen' */
+	{ 0x18, KEY_VIDEO },		/* 'display' */
+	{ 0x38, KEY_SEARCH },		/* 'loop' */
+	{ 0x08, KEY_INFO },		/* 'preview' */
+	{ 0x2a, KEY_REWIND },		/* 'backward <<' */
+	{ 0x1a, KEY_FASTFORWARD },	/* 'forward >>' */
+	{ 0x3a, KEY_RECORD },		/* 'capture' */
+	{ 0x0a, KEY_MUTE },		/* 'mute' */
+	{ 0x2c, KEY_RECORD },		/* 'record' */
+	{ 0x1c, KEY_PAUSE },		/* 'pause' */
+	{ 0x3c, KEY_STOP },		/* 'stop' */
+	{ 0x0c, KEY_PLAY },		/* 'play' */
+	{ 0x2e, KEY_RED },		/* 'red' */
+	{ 0x01, KEY_BLUE },		/* 'blue' / 'cancel' */
+	{ 0x0e, KEY_YELLOW },		/* 'yellow' / 'ok' */
+	{ 0x21, KEY_GREEN },		/* 'green' */
+	{ 0x11, KEY_CHANNELDOWN },	/* 'channel -' */
+	{ 0x31, KEY_CHANNELUP },	/* 'channel +' */
+	{ 0x1e, KEY_VOLUMEDOWN },	/* 'volume -' */
+	{ 0x3e, KEY_VOLUMEUP },		/* 'volume +' */
+};
+
+static struct rc_keymap avermedia_dvbt_map = {
+	.map = {
+		.scan    = avermedia_dvbt,
+		.size    = ARRAY_SIZE(avermedia_dvbt),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_AVERMEDIA_DVBT,
+	}
+};
+
+static int __init init_rc_map_avermedia_dvbt(void)
+{
+	return ir_register_map(&avermedia_dvbt_map);
+}
+
+static void __exit exit_rc_map_avermedia_dvbt(void)
+{
+	ir_unregister_map(&avermedia_dvbt_map);
+}
+
+module_init(init_rc_map_avermedia_dvbt)
+module_exit(exit_rc_map_avermedia_dvbt)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
new file mode 100644
index 000000000000..e4471fb2ad1e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -0,0 +1,147 @@
+/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M135A with RM-JX and RM-K6 remote controls
+ *
+ * On Avermedia M135A with IR model RM-JX, the same codes exist on both
+ * Positivo (BR) and original IR, initial version and remote control codes
+ * added by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Positivo also ships Avermedia M135A with model RM-K6, extra control
+ * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m135a[] = {
+	/* RM-JX */
+	{ 0x0200, KEY_POWER2 },
+	{ 0x022e, KEY_DOT },		/* '.' */
+	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
+
+	{ 0x0205, KEY_1 },
+	{ 0x0206, KEY_2 },
+	{ 0x0207, KEY_3 },
+	{ 0x0209, KEY_4 },
+	{ 0x020a, KEY_5 },
+	{ 0x020b, KEY_6 },
+	{ 0x020d, KEY_7 },
+	{ 0x020e, KEY_8 },
+	{ 0x020f, KEY_9 },
+	{ 0x0211, KEY_0 },
+
+	{ 0x0213, KEY_RIGHT },		/* -> or L */
+	{ 0x0212, KEY_LEFT },		/* <- or R */
+
+	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
+	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
+
+	{ 0x0303, KEY_CHANNELUP },
+	{ 0x0302, KEY_CHANNELDOWN },
+	{ 0x021f, KEY_VOLUMEUP },
+	{ 0x021e, KEY_VOLUMEDOWN },
+	{ 0x020c, KEY_ENTER },		/* Full Screen */
+
+	{ 0x0214, KEY_MUTE },
+	{ 0x0208, KEY_AUDIO },
+
+	{ 0x0203, KEY_TEXT },		/* Teletext */
+	{ 0x0204, KEY_EPG },
+	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
+
+	{ 0x021d, KEY_RED },
+	{ 0x021c, KEY_YELLOW },
+	{ 0x0301, KEY_GREEN },
+	{ 0x0300, KEY_BLUE },
+
+	{ 0x021a, KEY_PLAYPAUSE },
+	{ 0x0219, KEY_RECORD },
+	{ 0x0218, KEY_PLAY },
+	{ 0x021b, KEY_STOP },
+
+	/* RM-K6 */
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m135a_map = {
+	.map = {
+		.scan    = avermedia_m135a,
+		.size    = ARRAY_SIZE(avermedia_m135a),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M135A,
+	}
+};
+
+static int __init init_rc_map_avermedia_m135a(void)
+{
+	return ir_register_map(&avermedia_m135a_map);
+}
+
+static void __exit exit_rc_map_avermedia_m135a(void)
+{
+	ir_unregister_map(&avermedia_m135a_map);
+}
+
+module_init(init_rc_map_avermedia_m135a)
+module_exit(exit_rc_map_avermedia_m135a)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
new file mode 100644
index 000000000000..cf8d45717cb3
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -0,0 +1,95 @@
+/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
+ *
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M733A with IR model RM-K6
+ * This is the stock remote controller used with Positivo machines with M733A
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m733a_rm_k6[] = {
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m733a_rm_k6_map = {
+	.map = {
+		.scan    = avermedia_m733a_rm_k6,
+		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
+	}
+};
+
+static int __init init_rc_map_avermedia_m733a_rm_k6(void)
+{
+	return ir_register_map(&avermedia_m733a_rm_k6_map);
+}
+
+static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
+{
+	ir_unregister_map(&avermedia_m733a_rm_k6_map);
+}
+
+module_init(init_rc_map_avermedia_m733a_rm_k6)
+module_exit(exit_rc_map_avermedia_m733a_rm_k6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
new file mode 100644
index 000000000000..9ee60906c861
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -0,0 +1,79 @@
+/*
+ * AverMedia RM-KS remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
+   and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
+/* FIXME: mappings are not 100% correct? */
+static struct ir_scancode avermedia_rm_ks[] = {
+	{ 0x0501, KEY_POWER2 },
+	{ 0x0502, KEY_CHANNELUP },
+	{ 0x0503, KEY_CHANNELDOWN },
+	{ 0x0504, KEY_VOLUMEUP },
+	{ 0x0505, KEY_VOLUMEDOWN },
+	{ 0x0506, KEY_MUTE },
+	{ 0x0507, KEY_RIGHT },
+	{ 0x0508, KEY_PROG1 },
+	{ 0x0509, KEY_1 },
+	{ 0x050a, KEY_2 },
+	{ 0x050b, KEY_3 },
+	{ 0x050c, KEY_4 },
+	{ 0x050d, KEY_5 },
+	{ 0x050e, KEY_6 },
+	{ 0x050f, KEY_7 },
+	{ 0x0510, KEY_8 },
+	{ 0x0511, KEY_9 },
+	{ 0x0512, KEY_0 },
+	{ 0x0513, KEY_AUDIO },
+	{ 0x0515, KEY_EPG },
+	{ 0x0516, KEY_PLAY },
+	{ 0x0517, KEY_RECORD },
+	{ 0x0518, KEY_STOP },
+	{ 0x051c, KEY_BACK },
+	{ 0x051d, KEY_FORWARD },
+	{ 0x054d, KEY_LEFT },
+	{ 0x0556, KEY_ZOOM },
+};
+
+static struct rc_keymap avermedia_rm_ks_map = {
+	.map = {
+		.scan    = avermedia_rm_ks,
+		.size    = ARRAY_SIZE(avermedia_rm_ks),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_RM_KS,
+	}
+};
+
+static int __init init_rc_map_avermedia_rm_ks(void)
+{
+	return ir_register_map(&avermedia_rm_ks_map);
+}
+
+static void __exit exit_rc_map_avermedia_rm_ks(void)
+{
+	ir_unregister_map(&avermedia_rm_ks_map);
+}
+
+module_init(init_rc_map_avermedia_rm_ks)
+module_exit(exit_rc_map_avermedia_rm_ks)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
new file mode 100644
index 000000000000..21effd5bfb0d
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -0,0 +1,86 @@
+/* avermedia.h - Keytable for avermedia Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Alex Hermann <gaaf@gmx.net> */
+
+static struct ir_scancode avermedia[] = {
+	{ 0x28, KEY_1 },
+	{ 0x18, KEY_2 },
+	{ 0x38, KEY_3 },
+	{ 0x24, KEY_4 },
+	{ 0x14, KEY_5 },
+	{ 0x34, KEY_6 },
+	{ 0x2c, KEY_7 },
+	{ 0x1c, KEY_8 },
+	{ 0x3c, KEY_9 },
+	{ 0x22, KEY_0 },
+
+	{ 0x20, KEY_TV },		/* TV/FM */
+	{ 0x10, KEY_CD },		/* CD */
+	{ 0x30, KEY_TEXT },		/* TELETEXT */
+	{ 0x00, KEY_POWER },		/* POWER */
+
+	{ 0x08, KEY_VIDEO },		/* VIDEO */
+	{ 0x04, KEY_AUDIO },		/* AUDIO */
+	{ 0x0c, KEY_ZOOM },		/* FULL SCREEN */
+
+	{ 0x12, KEY_SUBTITLE },		/* DISPLAY */
+	{ 0x32, KEY_REWIND },		/* LOOP	*/
+	{ 0x02, KEY_PRINT },		/* PREVIEW */
+
+	{ 0x2a, KEY_SEARCH },		/* AUTOSCAN */
+	{ 0x1a, KEY_SLEEP },		/* FREEZE */
+	{ 0x3a, KEY_CAMERA },		/* SNAPSHOT */
+	{ 0x0a, KEY_MUTE },		/* MUTE */
+
+	{ 0x26, KEY_RECORD },		/* RECORD */
+	{ 0x16, KEY_PAUSE },		/* PAUSE */
+	{ 0x36, KEY_STOP },		/* STOP */
+	{ 0x06, KEY_PLAY },		/* PLAY */
+
+	{ 0x2e, KEY_RED },		/* RED */
+	{ 0x21, KEY_GREEN },		/* GREEN */
+	{ 0x0e, KEY_YELLOW },		/* YELLOW */
+	{ 0x01, KEY_BLUE },		/* BLUE */
+
+	{ 0x1e, KEY_VOLUMEDOWN },	/* VOLUME- */
+	{ 0x3e, KEY_VOLUMEUP },		/* VOLUME+ */
+	{ 0x11, KEY_CHANNELDOWN },	/* CHANNEL/PAGE- */
+	{ 0x31, KEY_CHANNELUP }		/* CHANNEL/PAGE+ */
+};
+
+static struct rc_keymap avermedia_map = {
+	.map = {
+		.scan    = avermedia,
+		.size    = ARRAY_SIZE(avermedia),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_AVERMEDIA,
+	}
+};
+
+static int __init init_rc_map_avermedia(void)
+{
+	return ir_register_map(&avermedia_map);
+}
+
+static void __exit exit_rc_map_avermedia(void)
+{
+	ir_unregister_map(&avermedia_map);
+}
+
+module_init(init_rc_map_avermedia)
+module_exit(exit_rc_map_avermedia)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
new file mode 100644
index 000000000000..971c59d6f9d6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -0,0 +1,85 @@
+/* avertv-303.h - Keytable for avertv_303 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* AVERTV STUDIO 303 Remote */
+
+static struct ir_scancode avertv_303[] = {
+	{ 0x2a, KEY_1 },
+	{ 0x32, KEY_2 },
+	{ 0x3a, KEY_3 },
+	{ 0x4a, KEY_4 },
+	{ 0x52, KEY_5 },
+	{ 0x5a, KEY_6 },
+	{ 0x6a, KEY_7 },
+	{ 0x72, KEY_8 },
+	{ 0x7a, KEY_9 },
+	{ 0x0e, KEY_0 },
+
+	{ 0x02, KEY_POWER },
+	{ 0x22, KEY_VIDEO },
+	{ 0x42, KEY_AUDIO },
+	{ 0x62, KEY_ZOOM },
+	{ 0x0a, KEY_TV },
+	{ 0x12, KEY_CD },
+	{ 0x1a, KEY_TEXT },
+
+	{ 0x16, KEY_SUBTITLE },
+	{ 0x1e, KEY_REWIND },
+	{ 0x06, KEY_PRINT },
+
+	{ 0x2e, KEY_SEARCH },
+	{ 0x36, KEY_SLEEP },
+	{ 0x3e, KEY_SHUFFLE },
+	{ 0x26, KEY_MUTE },
+
+	{ 0x4e, KEY_RECORD },
+	{ 0x56, KEY_PAUSE },
+	{ 0x5e, KEY_STOP },
+	{ 0x46, KEY_PLAY },
+
+	{ 0x6e, KEY_RED },
+	{ 0x0b, KEY_GREEN },
+	{ 0x66, KEY_YELLOW },
+	{ 0x03, KEY_BLUE },
+
+	{ 0x76, KEY_LEFT },
+	{ 0x7e, KEY_RIGHT },
+	{ 0x13, KEY_DOWN },
+	{ 0x1b, KEY_UP },
+};
+
+static struct rc_keymap avertv_303_map = {
+	.map = {
+		.scan    = avertv_303,
+		.size    = ARRAY_SIZE(avertv_303),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_AVERTV_303,
+	}
+};
+
+static int __init init_rc_map_avertv_303(void)
+{
+	return ir_register_map(&avertv_303_map);
+}
+
+static void __exit exit_rc_map_avertv_303(void)
+{
+	ir_unregister_map(&avertv_303_map);
+}
+
+module_init(init_rc_map_avertv_303)
+module_exit(exit_rc_map_avertv_303)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
new file mode 100644
index 000000000000..e0876147d471
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -0,0 +1,102 @@
+/*
+ * TwinHan AzureWave AD-TU700(704J) remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode azurewave_ad_tu700[] = {
+	{ 0x0000, KEY_TAB },             /* Tab */
+	{ 0x0001, KEY_2 },
+	{ 0x0002, KEY_CHANNELDOWN },
+	{ 0x0003, KEY_1 },
+	{ 0x0004, KEY_MENU },            /* Record List */
+	{ 0x0005, KEY_CHANNELUP },
+	{ 0x0006, KEY_3 },
+	{ 0x0007, KEY_SLEEP },           /* Hibernate */
+	{ 0x0008, KEY_VIDEO },           /* A/V */
+	{ 0x0009, KEY_4 },
+	{ 0x000a, KEY_VOLUMEDOWN },
+	{ 0x000c, KEY_CANCEL },          /* Cancel */
+	{ 0x000d, KEY_7 },
+	{ 0x000e, KEY_AGAIN },           /* Recall */
+	{ 0x000f, KEY_TEXT },            /* Teletext */
+	{ 0x0010, KEY_MUTE },
+	{ 0x0011, KEY_RECORD },
+	{ 0x0012, KEY_FASTFORWARD },     /* FF >> */
+	{ 0x0013, KEY_BACK },            /* Back */
+	{ 0x0014, KEY_PLAY },
+	{ 0x0015, KEY_0 },
+	{ 0x0016, KEY_POWER2 },          /* [red power button] */
+	{ 0x0017, KEY_FAVORITES },       /* Favorite List */
+	{ 0x0018, KEY_RED },
+	{ 0x0019, KEY_8 },
+	{ 0x001a, KEY_STOP },
+	{ 0x001b, KEY_9 },
+	{ 0x001c, KEY_EPG },             /* Info/EPG */
+	{ 0x001d, KEY_5 },
+	{ 0x001e, KEY_VOLUMEUP },
+	{ 0x001f, KEY_6 },
+	{ 0x0040, KEY_REWIND },          /* FR << */
+	{ 0x0041, KEY_PREVIOUS },        /* Replay */
+	{ 0x0042, KEY_NEXT },            /* Skip */
+	{ 0x0043, KEY_SUBTITLE },        /* Subtitle / CC */
+	{ 0x0045, KEY_KPPLUS },          /* Zoom+ */
+	{ 0x0046, KEY_KPMINUS },         /* Zoom- */
+	{ 0x0047, KEY_NEW },             /* PIP */
+	{ 0x0048, KEY_INFO },            /* Preview */
+	{ 0x0049, KEY_MODE },            /* L/R */
+	{ 0x004a, KEY_CLEAR },           /* Clear */
+	{ 0x004b, KEY_UP },              /* up arrow */
+	{ 0x004c, KEY_PAUSE },
+	{ 0x004d, KEY_ZOOM },            /* Full Screen */
+	{ 0x004e, KEY_LEFT },            /* left arrow */
+	{ 0x004f, KEY_OK },              /* Enter / ok */
+	{ 0x0050, KEY_LANGUAGE },        /* SAP */
+	{ 0x0051, KEY_DOWN },            /* down arrow */
+	{ 0x0052, KEY_RIGHT },           /* right arrow */
+	{ 0x0053, KEY_GREEN },
+	{ 0x0054, KEY_CAMERA },          /* Capture */
+	{ 0x005e, KEY_YELLOW },
+	{ 0x005f, KEY_BLUE },
+};
+
+static struct rc_keymap azurewave_ad_tu700_map = {
+	.map = {
+		.scan    = azurewave_ad_tu700,
+		.size    = ARRAY_SIZE(azurewave_ad_tu700),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AZUREWAVE_AD_TU700,
+	}
+};
+
+static int __init init_rc_map_azurewave_ad_tu700(void)
+{
+	return ir_register_map(&azurewave_ad_tu700_map);
+}
+
+static void __exit exit_rc_map_azurewave_ad_tu700(void)
+{
+	ir_unregister_map(&azurewave_ad_tu700_map);
+}
+
+module_init(init_rc_map_azurewave_ad_tu700)
+module_exit(exit_rc_map_azurewave_ad_tu700)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
new file mode 100644
index 000000000000..9f56c98fef5b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -0,0 +1,108 @@
+/* behold-columbus.h - Keytable for behold_columbus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Beholder Intl. Ltd. 2008
+ * Dmitry Belimov d.belimov@google.com
+ * Keytable is used by BeholdTV Columbus
+ * The "ascii-art picture" below (in comments, first row
+ * is the keycode in hex, and subsequent row(s) shows
+ * the button labels (several variants when appropriate)
+ * helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode behold_columbus[] = {
+
+	/*  0x13   0x11   0x1C   0x12  *
+	 *  Mute  Source  TV/FM  Power *
+	 *                             */
+
+	{ 0x13, KEY_MUTE },
+	{ 0x11, KEY_PROPS },
+	{ 0x1C, KEY_TUNER },	/* KEY_TV/KEY_RADIO	*/
+	{ 0x12, KEY_POWER },
+
+	/*  0x01    0x02    0x03  0x0D    *
+	 *   1       2       3   Stereo   *
+	 *                        	  *
+	 *  0x04    0x05    0x06  0x19    *
+	 *   4       5       6   Snapshot *
+	 *                        	  *
+	 *  0x07    0x08    0x09  0x10    *
+	 *   7       8       9    Zoom 	  *
+	 *                                */
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x0D, KEY_SETUP },	  /* Setup key */
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x19, KEY_CAMERA },	/* Snapshot key */
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+	{ 0x10, KEY_ZOOM },
+
+	/*  0x0A    0x00    0x0B       0x0C   *
+	 * RECALL    0    ChannelUp  VolumeUp *
+	 *                                    */
+	{ 0x0A, KEY_AGAIN },
+	{ 0x00, KEY_0 },
+	{ 0x0B, KEY_CHANNELUP },
+	{ 0x0C, KEY_VOLUMEUP },
+
+	/*   0x1B      0x1D      0x15        0x18     *
+	 * Timeshift  Record  ChannelDown  VolumeDown *
+	 *                                            */
+
+	{ 0x1B, KEY_TIME },
+	{ 0x1D, KEY_RECORD },
+	{ 0x15, KEY_CHANNELDOWN },
+	{ 0x18, KEY_VOLUMEDOWN },
+
+	/*   0x0E   0x1E     0x0F     0x1A  *
+	 *   Stop   Pause  Previouse  Next  *
+	 *                                  */
+
+	{ 0x0E, KEY_STOP },
+	{ 0x1E, KEY_PAUSE },
+	{ 0x0F, KEY_PREVIOUS },
+	{ 0x1A, KEY_NEXT },
+
+};
+
+static struct rc_keymap behold_columbus_map = {
+	.map = {
+		.scan    = behold_columbus,
+		.size    = ARRAY_SIZE(behold_columbus),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_BEHOLD_COLUMBUS,
+	}
+};
+
+static int __init init_rc_map_behold_columbus(void)
+{
+	return ir_register_map(&behold_columbus_map);
+}
+
+static void __exit exit_rc_map_behold_columbus(void)
+{
+	ir_unregister_map(&behold_columbus_map);
+}
+
+module_init(init_rc_map_behold_columbus)
+module_exit(exit_rc_map_behold_columbus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
new file mode 100644
index 000000000000..abc140b2098b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -0,0 +1,141 @@
+/* behold.h - Keytable for behold Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Igor Kuznetsov <igk72@ya.ru>
+ * Andrey J. Melnikov <temnota@kmv.ru>
+ *
+ * Keytable is used by BeholdTV 60x series, M6 series at
+ * least, and probably other cards too.
+ * The "ascii-art picture" below (in comments, first row
+ * is the keycode in hex, and subsequent row(s) shows
+ * the button labels (several variants when appropriate)
+ * helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode behold[] = {
+
+	/*  0x1c            0x12  *
+	 *  TV/FM          POWER  *
+	 *                        */
+	{ 0x1c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
+	{ 0x12, KEY_POWER },
+
+	/*  0x01    0x02    0x03  *
+	 *   1       2       3    *
+	 *                        *
+	 *  0x04    0x05    0x06  *
+	 *   4       5       6    *
+	 *                        *
+	 *  0x07    0x08    0x09  *
+	 *   7       8       9    *
+	 *                        */
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	/*  0x0a    0x00    0x17  *
+	 * RECALL    0      MODE  *
+	 *                        */
+	{ 0x0a, KEY_AGAIN },
+	{ 0x00, KEY_0 },
+	{ 0x17, KEY_MODE },
+
+	/*  0x14          0x10    *
+	 * ASPECT      FULLSCREEN *
+	 *                        */
+	{ 0x14, KEY_SCREEN },
+	{ 0x10, KEY_ZOOM },
+
+	/*          0x0b          *
+	 *           Up           *
+	 *                        *
+	 *  0x18    0x16    0x0c  *
+	 *  Left     Ok     Right *
+	 *                        *
+	 *         0x015          *
+	 *         Down           *
+	 *                        */
+	{ 0x0b, KEY_CHANNELUP },
+	{ 0x18, KEY_VOLUMEDOWN },
+	{ 0x16, KEY_OK },		/* XXX KEY_ENTER */
+	{ 0x0c, KEY_VOLUMEUP },
+	{ 0x15, KEY_CHANNELDOWN },
+
+	/*  0x11            0x0d  *
+	 *  MUTE            INFO  *
+	 *                        */
+	{ 0x11, KEY_MUTE },
+	{ 0x0d, KEY_INFO },
+
+	/*  0x0f    0x1b    0x1a  *
+	 * RECORD PLAY/PAUSE STOP *
+	 *                        *
+	 *  0x0e    0x1f    0x1e  *
+	 *TELETEXT  AUDIO  SOURCE *
+	 *           RED   YELLOW *
+	 *                        */
+	{ 0x0f, KEY_RECORD },
+	{ 0x1b, KEY_PLAYPAUSE },
+	{ 0x1a, KEY_STOP },
+	{ 0x0e, KEY_TEXT },
+	{ 0x1f, KEY_RED },	/*XXX KEY_AUDIO	*/
+	{ 0x1e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
+
+	/*  0x1d   0x13     0x19  *
+	 * SLEEP  PREVIEW   DVB   *
+	 *         GREEN    BLUE  *
+	 *                        */
+	{ 0x1d, KEY_SLEEP },
+	{ 0x13, KEY_GREEN },
+	{ 0x19, KEY_BLUE },	/* XXX KEY_SAT	*/
+
+	/*  0x58           0x5c   *
+	 * FREEZE        SNAPSHOT *
+	 *                        */
+	{ 0x58, KEY_SLOW },
+	{ 0x5c, KEY_CAMERA },
+
+};
+
+static struct rc_keymap behold_map = {
+	.map = {
+		.scan    = behold,
+		.size    = ARRAY_SIZE(behold),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_BEHOLD,
+	}
+};
+
+static int __init init_rc_map_behold(void)
+{
+	return ir_register_map(&behold_map);
+}
+
+static void __exit exit_rc_map_behold(void)
+{
+	ir_unregister_map(&behold_map);
+}
+
+module_init(init_rc_map_behold)
+module_exit(exit_rc_map_behold)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
new file mode 100644
index 000000000000..64c2ac913338
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -0,0 +1,92 @@
+/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* From reading the following remotes:
+ * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
+ * Hauppauge (from NOVA-CI-s box product)
+ * This is a "middle of the road" approach, differences are noted
+ */
+
+static struct ir_scancode budget_ci_old[] = {
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+	{ 0x0a, KEY_ENTER },
+	{ 0x0b, KEY_RED },
+	{ 0x0c, KEY_POWER },		/* RADIO on Hauppauge */
+	{ 0x0d, KEY_MUTE },
+	{ 0x0f, KEY_A },		/* TV on Hauppauge */
+	{ 0x10, KEY_VOLUMEUP },
+	{ 0x11, KEY_VOLUMEDOWN },
+	{ 0x14, KEY_B },
+	{ 0x1c, KEY_UP },
+	{ 0x1d, KEY_DOWN },
+	{ 0x1e, KEY_OPTION },		/* RESERVED on Hauppauge */
+	{ 0x1f, KEY_BREAK },
+	{ 0x20, KEY_CHANNELUP },
+	{ 0x21, KEY_CHANNELDOWN },
+	{ 0x22, KEY_PREVIOUS },		/* Prev Ch on Zenith, SOURCE on Hauppauge */
+	{ 0x24, KEY_RESTART },
+	{ 0x25, KEY_OK },
+	{ 0x26, KEY_CYCLEWINDOWS },	/* MINIMIZE on Hauppauge */
+	{ 0x28, KEY_ENTER },		/* VCR mode on Zenith */
+	{ 0x29, KEY_PAUSE },
+	{ 0x2b, KEY_RIGHT },
+	{ 0x2c, KEY_LEFT },
+	{ 0x2e, KEY_MENU },		/* FULL SCREEN on Hauppauge */
+	{ 0x30, KEY_SLOW },
+	{ 0x31, KEY_PREVIOUS },		/* VCR mode on Zenith */
+	{ 0x32, KEY_REWIND },
+	{ 0x34, KEY_FASTFORWARD },
+	{ 0x35, KEY_PLAY },
+	{ 0x36, KEY_STOP },
+	{ 0x37, KEY_RECORD },
+	{ 0x38, KEY_TUNER },		/* TV/VCR on Zenith */
+	{ 0x3a, KEY_C },
+	{ 0x3c, KEY_EXIT },
+	{ 0x3d, KEY_POWER2 },
+	{ 0x3e, KEY_TUNER },
+};
+
+static struct rc_keymap budget_ci_old_map = {
+	.map = {
+		.scan    = budget_ci_old,
+		.size    = ARRAY_SIZE(budget_ci_old),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_BUDGET_CI_OLD,
+	}
+};
+
+static int __init init_rc_map_budget_ci_old(void)
+{
+	return ir_register_map(&budget_ci_old_map);
+}
+
+static void __exit exit_rc_map_budget_ci_old(void)
+{
+	ir_unregister_map(&budget_ci_old_map);
+}
+
+module_init(init_rc_map_budget_ci_old)
+module_exit(exit_rc_map_budget_ci_old)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
new file mode 100644
index 000000000000..074f2c2c2c61
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -0,0 +1,84 @@
+/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Cinergy 1400 DVB-T */
+
+static struct ir_scancode cinergy_1400[] = {
+	{ 0x01, KEY_POWER },
+	{ 0x02, KEY_1 },
+	{ 0x03, KEY_2 },
+	{ 0x04, KEY_3 },
+	{ 0x05, KEY_4 },
+	{ 0x06, KEY_5 },
+	{ 0x07, KEY_6 },
+	{ 0x08, KEY_7 },
+	{ 0x09, KEY_8 },
+	{ 0x0a, KEY_9 },
+	{ 0x0c, KEY_0 },
+
+	{ 0x0b, KEY_VIDEO },
+	{ 0x0d, KEY_REFRESH },
+	{ 0x0e, KEY_SELECT },
+	{ 0x0f, KEY_EPG },
+	{ 0x10, KEY_UP },
+	{ 0x11, KEY_LEFT },
+	{ 0x12, KEY_OK },
+	{ 0x13, KEY_RIGHT },
+	{ 0x14, KEY_DOWN },
+	{ 0x15, KEY_TEXT },
+	{ 0x16, KEY_INFO },
+
+	{ 0x17, KEY_RED },
+	{ 0x18, KEY_GREEN },
+	{ 0x19, KEY_YELLOW },
+	{ 0x1a, KEY_BLUE },
+
+	{ 0x1b, KEY_CHANNELUP },
+	{ 0x1c, KEY_VOLUMEUP },
+	{ 0x1d, KEY_MUTE },
+	{ 0x1e, KEY_VOLUMEDOWN },
+	{ 0x1f, KEY_CHANNELDOWN },
+
+	{ 0x40, KEY_PAUSE },
+	{ 0x4c, KEY_PLAY },
+	{ 0x58, KEY_RECORD },
+	{ 0x54, KEY_PREVIOUS },
+	{ 0x48, KEY_STOP },
+	{ 0x5c, KEY_NEXT },
+};
+
+static struct rc_keymap cinergy_1400_map = {
+	.map = {
+		.scan    = cinergy_1400,
+		.size    = ARRAY_SIZE(cinergy_1400),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_CINERGY_1400,
+	}
+};
+
+static int __init init_rc_map_cinergy_1400(void)
+{
+	return ir_register_map(&cinergy_1400_map);
+}
+
+static void __exit exit_rc_map_cinergy_1400(void)
+{
+	ir_unregister_map(&cinergy_1400_map);
+}
+
+module_init(init_rc_map_cinergy_1400)
+module_exit(exit_rc_map_cinergy_1400)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
new file mode 100644
index 000000000000..cf84c3dba742
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -0,0 +1,78 @@
+/* cinergy.h - Keytable for cinergy Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode cinergy[] = {
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0a, KEY_POWER },
+	{ 0x0b, KEY_PROG1 },		/* app */
+	{ 0x0c, KEY_ZOOM },		/* zoom/fullscreen */
+	{ 0x0d, KEY_CHANNELUP },	/* channel */
+	{ 0x0e, KEY_CHANNELDOWN },	/* channel- */
+	{ 0x0f, KEY_VOLUMEUP },
+	{ 0x10, KEY_VOLUMEDOWN },
+	{ 0x11, KEY_TUNER },		/* AV */
+	{ 0x12, KEY_NUMLOCK },		/* -/-- */
+	{ 0x13, KEY_AUDIO },		/* audio */
+	{ 0x14, KEY_MUTE },
+	{ 0x15, KEY_UP },
+	{ 0x16, KEY_DOWN },
+	{ 0x17, KEY_LEFT },
+	{ 0x18, KEY_RIGHT },
+	{ 0x19, BTN_LEFT, },
+	{ 0x1a, BTN_RIGHT, },
+	{ 0x1b, KEY_WWW },		/* text */
+	{ 0x1c, KEY_REWIND },
+	{ 0x1d, KEY_FORWARD },
+	{ 0x1e, KEY_RECORD },
+	{ 0x1f, KEY_PLAY },
+	{ 0x20, KEY_PREVIOUSSONG },
+	{ 0x21, KEY_NEXTSONG },
+	{ 0x22, KEY_PAUSE },
+	{ 0x23, KEY_STOP },
+};
+
+static struct rc_keymap cinergy_map = {
+	.map = {
+		.scan    = cinergy,
+		.size    = ARRAY_SIZE(cinergy),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_CINERGY,
+	}
+};
+
+static int __init init_rc_map_cinergy(void)
+{
+	return ir_register_map(&cinergy_map);
+}
+
+static void __exit exit_rc_map_cinergy(void)
+{
+	ir_unregister_map(&cinergy_map);
+}
+
+module_init(init_rc_map_cinergy)
+module_exit(exit_rc_map_cinergy)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
new file mode 100644
index 000000000000..ae1832038fbe
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -0,0 +1,124 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_nec_table[] = {
+	/* Key codes for the Pixelview SBTVD remote */
+	{ 0x8613, KEY_MUTE },
+	{ 0x8612, KEY_POWER },
+	{ 0x8601, KEY_1 },
+	{ 0x8602, KEY_2 },
+	{ 0x8603, KEY_3 },
+	{ 0x8604, KEY_4 },
+	{ 0x8605, KEY_5 },
+	{ 0x8606, KEY_6 },
+	{ 0x8607, KEY_7 },
+	{ 0x8608, KEY_8 },
+	{ 0x8609, KEY_9 },
+	{ 0x8600, KEY_0 },
+	{ 0x860d, KEY_CHANNELUP },
+	{ 0x8619, KEY_CHANNELDOWN },
+	{ 0x8610, KEY_VOLUMEUP },
+	{ 0x860c, KEY_VOLUMEDOWN },
+
+	{ 0x860a, KEY_CAMERA },
+	{ 0x860b, KEY_ZOOM },
+	{ 0x861b, KEY_BACKSPACE },
+	{ 0x8615, KEY_ENTER },
+
+	{ 0x861d, KEY_UP },
+	{ 0x861e, KEY_DOWN },
+	{ 0x860e, KEY_LEFT },
+	{ 0x860f, KEY_RIGHT },
+
+	{ 0x8618, KEY_RECORD },
+	{ 0x861a, KEY_STOP },
+
+	/* Key codes for the EvolutePC TVWay+ remote */
+	{ 0x7a00, KEY_MENU },
+	{ 0x7a01, KEY_RECORD },
+	{ 0x7a02, KEY_PLAY },
+	{ 0x7a03, KEY_STOP },
+	{ 0x7a10, KEY_CHANNELUP },
+	{ 0x7a11, KEY_CHANNELDOWN },
+	{ 0x7a12, KEY_VOLUMEUP },
+	{ 0x7a13, KEY_VOLUMEDOWN },
+	{ 0x7a40, KEY_POWER },
+	{ 0x7a41, KEY_MUTE },
+
+	/* Key codes for the Elgato EyeTV Diversity silver remote */
+	{ 0x4501, KEY_POWER },
+	{ 0x4502, KEY_MUTE },
+	{ 0x4503, KEY_1 },
+	{ 0x4504, KEY_2 },
+	{ 0x4505, KEY_3 },
+	{ 0x4506, KEY_4 },
+	{ 0x4507, KEY_5 },
+	{ 0x4508, KEY_6 },
+	{ 0x4509, KEY_7 },
+	{ 0x450a, KEY_8 },
+	{ 0x450b, KEY_9 },
+	{ 0x450c, KEY_LAST },
+	{ 0x450d, KEY_0 },
+	{ 0x450e, KEY_ENTER },
+	{ 0x450f, KEY_RED },
+	{ 0x4510, KEY_CHANNELUP },
+	{ 0x4511, KEY_GREEN },
+	{ 0x4512, KEY_VOLUMEDOWN },
+	{ 0x4513, KEY_OK },
+	{ 0x4514, KEY_VOLUMEUP },
+	{ 0x4515, KEY_YELLOW },
+	{ 0x4516, KEY_CHANNELDOWN },
+	{ 0x4517, KEY_BLUE },
+	{ 0x4518, KEY_LEFT }, /* Skip backwards */
+	{ 0x4519, KEY_PLAYPAUSE },
+	{ 0x451a, KEY_RIGHT }, /* Skip forward */
+	{ 0x451b, KEY_REWIND },
+	{ 0x451c, KEY_L }, /* Live */
+	{ 0x451d, KEY_FASTFORWARD },
+	{ 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
+	{ 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
+	{ 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
+	{ 0x4541, KEY_SCREEN }, /*  Full screen toggle, 'Hold' for Teletext */
+	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
+};
+
+static struct rc_keymap dib0700_nec_map = {
+	.map = {
+		.scan    = dib0700_nec_table,
+		.size    = ARRAY_SIZE(dib0700_nec_table),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_DIB0700_NEC_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_nec_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_nec_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
new file mode 100644
index 000000000000..4a4797cfd77d
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -0,0 +1,235 @@
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_rc5_table[] = {
+	/* Key codes for the tiny Pinnacle remote*/
+	{ 0x0700, KEY_MUTE },
+	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
+	{ 0x0739, KEY_POWER },
+	{ 0x0703, KEY_VOLUMEUP },
+	{ 0x0709, KEY_VOLUMEDOWN },
+	{ 0x0706, KEY_CHANNELUP },
+	{ 0x070c, KEY_CHANNELDOWN },
+	{ 0x070f, KEY_1 },
+	{ 0x0715, KEY_2 },
+	{ 0x0710, KEY_3 },
+	{ 0x0718, KEY_4 },
+	{ 0x071b, KEY_5 },
+	{ 0x071e, KEY_6 },
+	{ 0x0711, KEY_7 },
+	{ 0x0721, KEY_8 },
+	{ 0x0712, KEY_9 },
+	{ 0x0727, KEY_0 },
+	{ 0x0724, KEY_SCREEN }, /* 'Square' key */
+	{ 0x072a, KEY_TEXT },   /* 'T' key */
+	{ 0x072d, KEY_REWIND },
+	{ 0x0730, KEY_PLAY },
+	{ 0x0733, KEY_FASTFORWARD },
+	{ 0x0736, KEY_RECORD },
+	{ 0x073c, KEY_STOP },
+	{ 0x073f, KEY_CANCEL }, /* '?' key */
+
+	/* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
+	{ 0xeb01, KEY_POWER },
+	{ 0xeb02, KEY_1 },
+	{ 0xeb03, KEY_2 },
+	{ 0xeb04, KEY_3 },
+	{ 0xeb05, KEY_4 },
+	{ 0xeb06, KEY_5 },
+	{ 0xeb07, KEY_6 },
+	{ 0xeb08, KEY_7 },
+	{ 0xeb09, KEY_8 },
+	{ 0xeb0a, KEY_9 },
+	{ 0xeb0b, KEY_VIDEO },
+	{ 0xeb0c, KEY_0 },
+	{ 0xeb0d, KEY_REFRESH },
+	{ 0xeb0f, KEY_EPG },
+	{ 0xeb10, KEY_UP },
+	{ 0xeb11, KEY_LEFT },
+	{ 0xeb12, KEY_OK },
+	{ 0xeb13, KEY_RIGHT },
+	{ 0xeb14, KEY_DOWN },
+	{ 0xeb16, KEY_INFO },
+	{ 0xeb17, KEY_RED },
+	{ 0xeb18, KEY_GREEN },
+	{ 0xeb19, KEY_YELLOW },
+	{ 0xeb1a, KEY_BLUE },
+	{ 0xeb1b, KEY_CHANNELUP },
+	{ 0xeb1c, KEY_VOLUMEUP },
+	{ 0xeb1d, KEY_MUTE },
+	{ 0xeb1e, KEY_VOLUMEDOWN },
+	{ 0xeb1f, KEY_CHANNELDOWN },
+	{ 0xeb40, KEY_PAUSE },
+	{ 0xeb41, KEY_HOME },
+	{ 0xeb42, KEY_MENU }, /* DVD Menu */
+	{ 0xeb43, KEY_SUBTITLE },
+	{ 0xeb44, KEY_TEXT }, /* Teletext */
+	{ 0xeb45, KEY_DELETE },
+	{ 0xeb46, KEY_TV },
+	{ 0xeb47, KEY_DVD },
+	{ 0xeb48, KEY_STOP },
+	{ 0xeb49, KEY_VIDEO },
+	{ 0xeb4a, KEY_AUDIO }, /* Music */
+	{ 0xeb4b, KEY_SCREEN }, /* Pic */
+	{ 0xeb4c, KEY_PLAY },
+	{ 0xeb4d, KEY_BACK },
+	{ 0xeb4e, KEY_REWIND },
+	{ 0xeb4f, KEY_FASTFORWARD },
+	{ 0xeb54, KEY_PREVIOUS },
+	{ 0xeb58, KEY_RECORD },
+	{ 0xeb5c, KEY_NEXT },
+
+	/* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
+	{ 0x1e00, KEY_0 },
+	{ 0x1e01, KEY_1 },
+	{ 0x1e02, KEY_2 },
+	{ 0x1e03, KEY_3 },
+	{ 0x1e04, KEY_4 },
+	{ 0x1e05, KEY_5 },
+	{ 0x1e06, KEY_6 },
+	{ 0x1e07, KEY_7 },
+	{ 0x1e08, KEY_8 },
+	{ 0x1e09, KEY_9 },
+	{ 0x1e0a, KEY_KPASTERISK },
+	{ 0x1e0b, KEY_RED },
+	{ 0x1e0c, KEY_RADIO },
+	{ 0x1e0d, KEY_MENU },
+	{ 0x1e0e, KEY_GRAVE }, /* # */
+	{ 0x1e0f, KEY_MUTE },
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+	{ 0x1e12, KEY_CHANNEL },
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e18, KEY_VIDEO },
+	{ 0x1e19, KEY_AUDIO },
+	{ 0x1e1a, KEY_MEDIA },
+	{ 0x1e1b, KEY_EPG },
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e1e, KEY_NEXT },
+	{ 0x1e1f, KEY_BACK },
+	{ 0x1e20, KEY_CHANNELUP },
+	{ 0x1e21, KEY_CHANNELDOWN },
+	{ 0x1e24, KEY_LAST }, /* Skip backwards */
+	{ 0x1e25, KEY_OK },
+	{ 0x1e29, KEY_BLUE},
+	{ 0x1e2e, KEY_GREEN },
+	{ 0x1e30, KEY_PAUSE },
+	{ 0x1e32, KEY_REWIND },
+	{ 0x1e34, KEY_FASTFORWARD },
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e36, KEY_STOP },
+	{ 0x1e37, KEY_RECORD },
+	{ 0x1e38, KEY_YELLOW },
+	{ 0x1e3b, KEY_GOTO },
+	{ 0x1e3d, KEY_POWER },
+
+	/* Key codes for the Leadtek Winfast DTV Dongle */
+	{ 0x0042, KEY_POWER },
+	{ 0x077c, KEY_TUNER },
+	{ 0x0f4e, KEY_PRINT }, /* PREVIEW */
+	{ 0x0840, KEY_SCREEN }, /* full screen toggle*/
+	{ 0x0f71, KEY_DOT }, /* frequency */
+	{ 0x0743, KEY_0 },
+	{ 0x0c41, KEY_1 },
+	{ 0x0443, KEY_2 },
+	{ 0x0b7f, KEY_3 },
+	{ 0x0e41, KEY_4 },
+	{ 0x0643, KEY_5 },
+	{ 0x097f, KEY_6 },
+	{ 0x0d7e, KEY_7 },
+	{ 0x057c, KEY_8 },
+	{ 0x0a40, KEY_9 },
+	{ 0x0e4e, KEY_CLEAR },
+	{ 0x047c, KEY_CHANNEL }, /* show channel number */
+	{ 0x0f41, KEY_LAST }, /* recall */
+	{ 0x0342, KEY_MUTE },
+	{ 0x064c, KEY_RESERVED }, /* PIP button*/
+	{ 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
+	{ 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
+	{ 0x0b70, KEY_RECORD },
+	{ 0x037d, KEY_VOLUMEUP },
+	{ 0x017d, KEY_VOLUMEDOWN },
+	{ 0x0242, KEY_CHANNELUP },
+	{ 0x007d, KEY_CHANNELDOWN },
+
+	/* Key codes for Nova-TD "credit card" remote control. */
+	{ 0x1d00, KEY_0 },
+	{ 0x1d01, KEY_1 },
+	{ 0x1d02, KEY_2 },
+	{ 0x1d03, KEY_3 },
+	{ 0x1d04, KEY_4 },
+	{ 0x1d05, KEY_5 },
+	{ 0x1d06, KEY_6 },
+	{ 0x1d07, KEY_7 },
+	{ 0x1d08, KEY_8 },
+	{ 0x1d09, KEY_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_CHANNEL },
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },
+	{ 0x1d1f, KEY_BACK },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+};
+
+static struct rc_keymap dib0700_rc5_map = {
+	.map = {
+		.scan    = dib0700_rc5_table,
+		.size    = ARRAY_SIZE(dib0700_rc5_table),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_DIB0700_RC5_TABLE,
+	}
+};
+
+static int __init init_rc_map(void)
+{
+	return ir_register_map(&dib0700_rc5_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+	ir_unregister_map(&dib0700_rc5_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
new file mode 100644
index 000000000000..63e469e2dd21
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -0,0 +1,98 @@
+/*
+ * DigitalNow TinyTwin remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode digitalnow_tinytwin[] = {
+	{ 0x0000, KEY_MUTE },            /* [symbol speaker] */
+	{ 0x0001, KEY_VOLUMEUP },
+	{ 0x0002, KEY_POWER2 },          /* TV [power button] */
+	{ 0x0003, KEY_2 },
+	{ 0x0004, KEY_3 },
+	{ 0x0005, KEY_4 },
+	{ 0x0006, KEY_6 },
+	{ 0x0007, KEY_7 },
+	{ 0x0008, KEY_8 },
+	{ 0x0009, KEY_NUMERIC_STAR },    /* [*] */
+	{ 0x000a, KEY_0 },
+	{ 0x000b, KEY_NUMERIC_POUND },   /* [#] */
+	{ 0x000c, KEY_RIGHT },           /* [right arrow] */
+	{ 0x000d, KEY_HOMEPAGE },        /* [symbol home] Start */
+	{ 0x000e, KEY_RED },             /* [red] Videos */
+	{ 0x0010, KEY_POWER },           /* PC [power button] */
+	{ 0x0011, KEY_YELLOW },          /* [yellow] Pictures */
+	{ 0x0012, KEY_DOWN },            /* [down arrow] */
+	{ 0x0013, KEY_GREEN },           /* [green] Music */
+	{ 0x0014, KEY_CYCLEWINDOWS },    /* BACK */
+	{ 0x0015, KEY_FAVORITES },       /* MORE */
+	{ 0x0016, KEY_UP },              /* [up arrow] */
+	{ 0x0017, KEY_LEFT },            /* [left arrow] */
+	{ 0x0018, KEY_OK },              /* OK */
+	{ 0x0019, KEY_BLUE },            /* [blue] MyTV */
+	{ 0x001a, KEY_REWIND },          /* REW [<<] */
+	{ 0x001b, KEY_PLAY },            /* PLAY */
+	{ 0x001c, KEY_5 },
+	{ 0x001d, KEY_9 },
+	{ 0x001e, KEY_VOLUMEDOWN },
+	{ 0x001f, KEY_1 },
+	{ 0x0040, KEY_STOP },            /* STOP */
+	{ 0x0042, KEY_PAUSE },           /* PAUSE */
+	{ 0x0043, KEY_SCREEN },          /* Aspect */
+	{ 0x0044, KEY_FORWARD },         /* FWD [>>] */
+	{ 0x0045, KEY_NEXT },            /* SKIP */
+	{ 0x0048, KEY_RECORD },          /* RECORD */
+	{ 0x0049, KEY_VIDEO },           /* RTV */
+	{ 0x004a, KEY_EPG },             /* Guide */
+	{ 0x004b, KEY_CHANNELUP },
+	{ 0x004c, KEY_HELP },            /* Help */
+	{ 0x004d, KEY_RADIO },           /* Radio */
+	{ 0x004f, KEY_CHANNELDOWN },
+	{ 0x0050, KEY_DVD },             /* DVD */
+	{ 0x0051, KEY_AUDIO },           /* Audio */
+	{ 0x0052, KEY_TITLE },           /* Title */
+	{ 0x0053, KEY_NEW },             /* [symbol PIP?] */
+	{ 0x0057, KEY_MENU },            /* Mouse */
+	{ 0x005a, KEY_PREVIOUS },        /* REPLAY */
+};
+
+static struct rc_keymap digitalnow_tinytwin_map = {
+	.map = {
+		.scan    = digitalnow_tinytwin,
+		.size    = ARRAY_SIZE(digitalnow_tinytwin),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_DIGITALNOW_TINYTWIN,
+	}
+};
+
+static int __init init_rc_map_digitalnow_tinytwin(void)
+{
+	return ir_register_map(&digitalnow_tinytwin_map);
+}
+
+static void __exit exit_rc_map_digitalnow_tinytwin(void)
+{
+	ir_unregister_map(&digitalnow_tinytwin_map);
+}
+
+module_init(init_rc_map_digitalnow_tinytwin)
+module_exit(exit_rc_map_digitalnow_tinytwin)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
new file mode 100644
index 000000000000..5dece78e19c5
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -0,0 +1,82 @@
+/*
+ * Digittrade DVB-T USB Stick remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Digittrade DVB-T USB Stick remote controller. */
+/* Imported from af9015.h.
+   Initial keytable was from Alain Kalker <miki@dds.nl> */
+
+/* Digittrade DVB-T USB Stick */
+static struct ir_scancode digittrade[] = {
+	{ 0x0000, KEY_9 },
+	{ 0x0001, KEY_EPG },             /* EPG */
+	{ 0x0002, KEY_VOLUMEDOWN },      /* Vol Dn */
+	{ 0x0003, KEY_TEXT },            /* TELETEXT */
+	{ 0x0004, KEY_8 },
+	{ 0x0005, KEY_MUTE },            /* MUTE */
+	{ 0x0006, KEY_POWER2 },          /* POWER */
+	{ 0x0009, KEY_ZOOM },            /* FULLSCREEN */
+	{ 0x000a, KEY_RECORD },          /* RECORD */
+	{ 0x000d, KEY_SUBTITLE },        /* SUBTITLE */
+	{ 0x000e, KEY_STOP },            /* STOP */
+	{ 0x0010, KEY_OK },              /* RETURN */
+	{ 0x0011, KEY_2 },
+	{ 0x0012, KEY_4 },
+	{ 0x0015, KEY_3 },
+	{ 0x0016, KEY_5 },
+	{ 0x0017, KEY_CHANNELDOWN },     /* Ch Dn */
+	{ 0x0019, KEY_CHANNELUP },       /* CH Up */
+	{ 0x001a, KEY_PAUSE },           /* PAUSE */
+	{ 0x001b, KEY_1 },
+	{ 0x001d, KEY_AUDIO },           /* DUAL SOUND */
+	{ 0x001e, KEY_PLAY },            /* PLAY */
+	{ 0x001f, KEY_CAMERA },          /* SNAPSHOT */
+	{ 0x0040, KEY_VOLUMEUP },        /* Vol Up */
+	{ 0x0048, KEY_7 },
+	{ 0x004c, KEY_6 },
+	{ 0x004d, KEY_PLAYPAUSE },       /* TIMESHIFT */
+	{ 0x0054, KEY_0 },
+};
+
+static struct rc_keymap digittrade_map = {
+	.map = {
+		.scan    = digittrade,
+		.size    = ARRAY_SIZE(digittrade),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_DIGITTRADE,
+	}
+};
+
+static int __init init_rc_map_digittrade(void)
+{
+	return ir_register_map(&digittrade_map);
+}
+
+static void __exit exit_rc_map_digittrade(void)
+{
+	ir_unregister_map(&digittrade_map);
+}
+
+module_init(init_rc_map_digittrade)
+module_exit(exit_rc_map_digittrade)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
new file mode 100644
index 000000000000..90684d0efea3
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -0,0 +1,76 @@
+/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DVBWorld remotes
+   Igor M. Liplianin <liplianin@me.by>
+ */
+
+static struct ir_scancode dm1105_nec[] = {
+	{ 0x0a, KEY_POWER2},		/* power */
+	{ 0x0c, KEY_MUTE},		/* mute */
+	{ 0x11, KEY_1},
+	{ 0x12, KEY_2},
+	{ 0x13, KEY_3},
+	{ 0x14, KEY_4},
+	{ 0x15, KEY_5},
+	{ 0x16, KEY_6},
+	{ 0x17, KEY_7},
+	{ 0x18, KEY_8},
+	{ 0x19, KEY_9},
+	{ 0x10, KEY_0},
+	{ 0x1c, KEY_CHANNELUP},		/* ch+ */
+	{ 0x0f, KEY_CHANNELDOWN},	/* ch- */
+	{ 0x1a, KEY_VOLUMEUP},		/* vol+ */
+	{ 0x0e, KEY_VOLUMEDOWN},	/* vol- */
+	{ 0x04, KEY_RECORD},		/* rec */
+	{ 0x09, KEY_CHANNEL},		/* fav */
+	{ 0x08, KEY_BACKSPACE},		/* rewind */
+	{ 0x07, KEY_FASTFORWARD},	/* fast */
+	{ 0x0b, KEY_PAUSE},		/* pause */
+	{ 0x02, KEY_ESC},		/* cancel */
+	{ 0x03, KEY_TAB},		/* tab */
+	{ 0x00, KEY_UP},		/* up */
+	{ 0x1f, KEY_ENTER},		/* ok */
+	{ 0x01, KEY_DOWN},		/* down */
+	{ 0x05, KEY_RECORD},		/* cap */
+	{ 0x06, KEY_STOP},		/* stop */
+	{ 0x40, KEY_ZOOM},		/* full */
+	{ 0x1e, KEY_TV},		/* tvmode */
+	{ 0x1b, KEY_B},			/* recall */
+};
+
+static struct rc_keymap dm1105_nec_map = {
+	.map = {
+		.scan    = dm1105_nec,
+		.size    = ARRAY_SIZE(dm1105_nec),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_DM1105_NEC,
+	}
+};
+
+static int __init init_rc_map_dm1105_nec(void)
+{
+	return ir_register_map(&dm1105_nec_map);
+}
+
+static void __exit exit_rc_map_dm1105_nec(void)
+{
+	ir_unregister_map(&dm1105_nec_map);
+}
+
+module_init(init_rc_map_dm1105_nec)
+module_exit(exit_rc_map_dm1105_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
new file mode 100644
index 000000000000..8a4027af964a
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -0,0 +1,78 @@
+/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DigitalNow DNTV Live DVB-T Remote */
+
+static struct ir_scancode dntv_live_dvb_t[] = {
+	{ 0x00, KEY_ESC },		/* 'go up a level?' */
+	/* Keys 0 to 9 */
+	{ 0x0a, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0b, KEY_TUNER },		/* tv/fm */
+	{ 0x0c, KEY_SEARCH },		/* scan */
+	{ 0x0d, KEY_STOP },
+	{ 0x0e, KEY_PAUSE },
+	{ 0x0f, KEY_LIST },		/* source */
+
+	{ 0x10, KEY_MUTE },
+	{ 0x11, KEY_REWIND },		/* backward << */
+	{ 0x12, KEY_POWER },
+	{ 0x13, KEY_CAMERA },		/* snap */
+	{ 0x14, KEY_AUDIO },		/* stereo */
+	{ 0x15, KEY_CLEAR },		/* reset */
+	{ 0x16, KEY_PLAY },
+	{ 0x17, KEY_ENTER },
+	{ 0x18, KEY_ZOOM },		/* full screen */
+	{ 0x19, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x1a, KEY_CHANNELUP },
+	{ 0x1b, KEY_VOLUMEUP },
+	{ 0x1c, KEY_INFO },		/* preview */
+	{ 0x1d, KEY_RECORD },		/* record */
+	{ 0x1e, KEY_CHANNELDOWN },
+	{ 0x1f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap dntv_live_dvb_t_map = {
+	.map = {
+		.scan    = dntv_live_dvb_t,
+		.size    = ARRAY_SIZE(dntv_live_dvb_t),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_DNTV_LIVE_DVB_T,
+	}
+};
+
+static int __init init_rc_map_dntv_live_dvb_t(void)
+{
+	return ir_register_map(&dntv_live_dvb_t_map);
+}
+
+static void __exit exit_rc_map_dntv_live_dvb_t(void)
+{
+	ir_unregister_map(&dntv_live_dvb_t_map);
+}
+
+module_init(init_rc_map_dntv_live_dvb_t)
+module_exit(exit_rc_map_dntv_live_dvb_t)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
new file mode 100644
index 000000000000..6f4d60764d59
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -0,0 +1,97 @@
+/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DigitalNow DNTV Live! DVB-T Pro Remote */
+
+static struct ir_scancode dntv_live_dvbt_pro[] = {
+	{ 0x16, KEY_POWER },
+	{ 0x5b, KEY_HOME },
+
+	{ 0x55, KEY_TV },		/* live tv */
+	{ 0x58, KEY_TUNER },		/* digital Radio */
+	{ 0x5a, KEY_RADIO },		/* FM radio */
+	{ 0x59, KEY_DVD },		/* dvd menu */
+	{ 0x03, KEY_1 },
+	{ 0x01, KEY_2 },
+	{ 0x06, KEY_3 },
+	{ 0x09, KEY_4 },
+	{ 0x1d, KEY_5 },
+	{ 0x1f, KEY_6 },
+	{ 0x0d, KEY_7 },
+	{ 0x19, KEY_8 },
+	{ 0x1b, KEY_9 },
+	{ 0x0c, KEY_CANCEL },
+	{ 0x15, KEY_0 },
+	{ 0x4a, KEY_CLEAR },
+	{ 0x13, KEY_BACK },
+	{ 0x00, KEY_TAB },
+	{ 0x4b, KEY_UP },
+	{ 0x4e, KEY_LEFT },
+	{ 0x4f, KEY_OK },
+	{ 0x52, KEY_RIGHT },
+	{ 0x51, KEY_DOWN },
+	{ 0x1e, KEY_VOLUMEUP },
+	{ 0x0a, KEY_VOLUMEDOWN },
+	{ 0x02, KEY_CHANNELDOWN },
+	{ 0x05, KEY_CHANNELUP },
+	{ 0x11, KEY_RECORD },
+	{ 0x14, KEY_PLAY },
+	{ 0x4c, KEY_PAUSE },
+	{ 0x1a, KEY_STOP },
+	{ 0x40, KEY_REWIND },
+	{ 0x12, KEY_FASTFORWARD },
+	{ 0x41, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x42, KEY_NEXTSONG },		/* skip >| */
+	{ 0x54, KEY_CAMERA },		/* capture */
+	{ 0x50, KEY_LANGUAGE },		/* sap */
+	{ 0x47, KEY_TV2 },		/* pip */
+	{ 0x4d, KEY_SCREEN },
+	{ 0x43, KEY_SUBTITLE },
+	{ 0x10, KEY_MUTE },
+	{ 0x49, KEY_AUDIO },		/* l/r */
+	{ 0x07, KEY_SLEEP },
+	{ 0x08, KEY_VIDEO },		/* a/v */
+	{ 0x0e, KEY_PREVIOUS },		/* recall */
+	{ 0x45, KEY_ZOOM },		/* zoom + */
+	{ 0x46, KEY_ANGLE },		/* zoom - */
+	{ 0x56, KEY_RED },
+	{ 0x57, KEY_GREEN },
+	{ 0x5c, KEY_YELLOW },
+	{ 0x5d, KEY_BLUE },
+};
+
+static struct rc_keymap dntv_live_dvbt_pro_map = {
+	.map = {
+		.scan    = dntv_live_dvbt_pro,
+		.size    = ARRAY_SIZE(dntv_live_dvbt_pro),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_DNTV_LIVE_DVBT_PRO,
+	}
+};
+
+static int __init init_rc_map_dntv_live_dvbt_pro(void)
+{
+	return ir_register_map(&dntv_live_dvbt_pro_map);
+}
+
+static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
+{
+	ir_unregister_map(&dntv_live_dvbt_pro_map);
+}
+
+module_init(init_rc_map_dntv_live_dvbt_pro)
+module_exit(exit_rc_map_dntv_live_dvbt_pro)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
new file mode 100644
index 000000000000..3130c9c29e6b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -0,0 +1,69 @@
+/* em-terratec.h - Keytable for em_terratec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode em_terratec[] = {
+	{ 0x01, KEY_CHANNEL },
+	{ 0x02, KEY_SELECT },
+	{ 0x03, KEY_MUTE },
+	{ 0x04, KEY_POWER },
+	{ 0x05, KEY_1 },
+	{ 0x06, KEY_2 },
+	{ 0x07, KEY_3 },
+	{ 0x08, KEY_CHANNELUP },
+	{ 0x09, KEY_4 },
+	{ 0x0a, KEY_5 },
+	{ 0x0b, KEY_6 },
+	{ 0x0c, KEY_CHANNELDOWN },
+	{ 0x0d, KEY_7 },
+	{ 0x0e, KEY_8 },
+	{ 0x0f, KEY_9 },
+	{ 0x10, KEY_VOLUMEUP },
+	{ 0x11, KEY_0 },
+	{ 0x12, KEY_MENU },
+	{ 0x13, KEY_PRINT },
+	{ 0x14, KEY_VOLUMEDOWN },
+	{ 0x16, KEY_PAUSE },
+	{ 0x18, KEY_RECORD },
+	{ 0x19, KEY_REWIND },
+	{ 0x1a, KEY_PLAY },
+	{ 0x1b, KEY_FORWARD },
+	{ 0x1c, KEY_BACKSPACE },
+	{ 0x1e, KEY_STOP },
+	{ 0x40, KEY_ZOOM },
+};
+
+static struct rc_keymap em_terratec_map = {
+	.map = {
+		.scan    = em_terratec,
+		.size    = ARRAY_SIZE(em_terratec),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EM_TERRATEC,
+	}
+};
+
+static int __init init_rc_map_em_terratec(void)
+{
+	return ir_register_map(&em_terratec_map);
+}
+
+static void __exit exit_rc_map_em_terratec(void)
+{
+	ir_unregister_map(&em_terratec_map);
+}
+
+module_init(init_rc_map_em_terratec)
+module_exit(exit_rc_map_em_terratec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
new file mode 100644
index 000000000000..4b816967877e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -0,0 +1,81 @@
+/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV-FM v5.3
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode encore_enltv_fm53[] = {
+	{ 0x10, KEY_POWER2},
+	{ 0x06, KEY_MUTE},
+
+	{ 0x09, KEY_1},
+	{ 0x1d, KEY_2},
+	{ 0x1f, KEY_3},
+	{ 0x19, KEY_4},
+	{ 0x1b, KEY_5},
+	{ 0x11, KEY_6},
+	{ 0x17, KEY_7},
+	{ 0x12, KEY_8},
+	{ 0x16, KEY_9},
+	{ 0x48, KEY_0},
+
+	{ 0x04, KEY_LIST},		/* -/-- */
+	{ 0x40, KEY_LAST},		/* recall */
+
+	{ 0x02, KEY_MODE},		/* TV/AV */
+	{ 0x05, KEY_CAMERA},		/* SNAPSHOT */
+
+	{ 0x4c, KEY_CHANNELUP},		/* UP */
+	{ 0x00, KEY_CHANNELDOWN},	/* DOWN */
+	{ 0x0d, KEY_VOLUMEUP},		/* RIGHT */
+	{ 0x15, KEY_VOLUMEDOWN},	/* LEFT */
+	{ 0x49, KEY_ENTER},		/* OK */
+
+	{ 0x54, KEY_RECORD},
+	{ 0x4d, KEY_PLAY},		/* pause */
+
+	{ 0x1e, KEY_MENU},		/* video setting */
+	{ 0x0e, KEY_RIGHT},		/* <- */
+	{ 0x1a, KEY_LEFT},		/* -> */
+
+	{ 0x0a, KEY_CLEAR},		/* video default */
+	{ 0x0c, KEY_ZOOM},		/* hide pannel */
+	{ 0x47, KEY_SLEEP},		/* shutdown */
+};
+
+static struct rc_keymap encore_enltv_fm53_map = {
+	.map = {
+		.scan    = encore_enltv_fm53,
+		.size    = ARRAY_SIZE(encore_enltv_fm53),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_ENCORE_ENLTV_FM53,
+	}
+};
+
+static int __init init_rc_map_encore_enltv_fm53(void)
+{
+	return ir_register_map(&encore_enltv_fm53_map);
+}
+
+static void __exit exit_rc_map_encore_enltv_fm53(void)
+{
+	ir_unregister_map(&encore_enltv_fm53_map);
+}
+
+module_init(init_rc_map_encore_enltv_fm53)
+module_exit(exit_rc_map_encore_enltv_fm53)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
new file mode 100644
index 000000000000..9fabffd28cc9
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -0,0 +1,112 @@
+/* encore-enltv.h - Keytable for encore_enltv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV-FM  - black plastic, white front cover with white glowing buttons
+    Juan Pablo Sormani <sorman@gmail.com> */
+
+static struct ir_scancode encore_enltv[] = {
+
+	/* Power button does nothing, neither in Windows app,
+	 although it sends data (used for BIOS wakeup?) */
+	{ 0x0d, KEY_MUTE },
+
+	{ 0x1e, KEY_TV },
+	{ 0x00, KEY_VIDEO },
+	{ 0x01, KEY_AUDIO },		/* music */
+	{ 0x02, KEY_MHP },		/* picture */
+
+	{ 0x1f, KEY_1 },
+	{ 0x03, KEY_2 },
+	{ 0x04, KEY_3 },
+	{ 0x05, KEY_4 },
+	{ 0x1c, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x1d, KEY_9 },
+	{ 0x0a, KEY_0 },
+
+	{ 0x09, KEY_LIST },		/* -/-- */
+	{ 0x0b, KEY_LAST },		/* recall */
+
+	{ 0x14, KEY_HOME },		/* win start menu */
+	{ 0x15, KEY_EXIT },		/* exit */
+	{ 0x16, KEY_CHANNELUP },	/* UP */
+	{ 0x12, KEY_CHANNELDOWN },	/* DOWN */
+	{ 0x0c, KEY_VOLUMEUP },		/* RIGHT */
+	{ 0x17, KEY_VOLUMEDOWN },	/* LEFT */
+
+	{ 0x18, KEY_ENTER },		/* OK */
+
+	{ 0x0e, KEY_ESC },
+	{ 0x13, KEY_CYCLEWINDOWS },	/* desktop */
+	{ 0x11, KEY_TAB },
+	{ 0x19, KEY_SWITCHVIDEOMODE },	/* switch */
+
+	{ 0x1a, KEY_MENU },
+	{ 0x1b, KEY_ZOOM },		/* fullscreen */
+	{ 0x44, KEY_TIME },		/* time shift */
+	{ 0x40, KEY_MODE },		/* source */
+
+	{ 0x5a, KEY_RECORD },
+	{ 0x42, KEY_PLAY },		/* play/pause */
+	{ 0x45, KEY_STOP },
+	{ 0x43, KEY_CAMERA },		/* camera icon */
+
+	{ 0x48, KEY_REWIND },
+	{ 0x4a, KEY_FASTFORWARD },
+	{ 0x49, KEY_PREVIOUS },
+	{ 0x4b, KEY_NEXT },
+
+	{ 0x4c, KEY_FAVORITES },	/* tv wall */
+	{ 0x4d, KEY_SOUND },		/* DVD sound */
+	{ 0x4e, KEY_LANGUAGE },		/* DVD lang */
+	{ 0x4f, KEY_TEXT },		/* DVD text */
+
+	{ 0x50, KEY_SLEEP },		/* shutdown */
+	{ 0x51, KEY_MODE },		/* stereo > main */
+	{ 0x52, KEY_SELECT },		/* stereo > sap */
+	{ 0x53, KEY_PROG1 },		/* teletext */
+
+
+	{ 0x59, KEY_RED },		/* AP1 */
+	{ 0x41, KEY_GREEN },		/* AP2 */
+	{ 0x47, KEY_YELLOW },		/* AP3 */
+	{ 0x57, KEY_BLUE },		/* AP4 */
+};
+
+static struct rc_keymap encore_enltv_map = {
+	.map = {
+		.scan    = encore_enltv,
+		.size    = ARRAY_SIZE(encore_enltv),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_ENCORE_ENLTV,
+	}
+};
+
+static int __init init_rc_map_encore_enltv(void)
+{
+	return ir_register_map(&encore_enltv_map);
+}
+
+static void __exit exit_rc_map_encore_enltv(void)
+{
+	ir_unregister_map(&encore_enltv_map);
+}
+
+module_init(init_rc_map_encore_enltv)
+module_exit(exit_rc_map_encore_enltv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
new file mode 100644
index 000000000000..efefd5166618
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -0,0 +1,90 @@
+/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
+    Mauro Carvalho Chehab <mchehab@infradead.org> */
+
+static struct ir_scancode encore_enltv2[] = {
+	{ 0x4c, KEY_POWER2 },
+	{ 0x4a, KEY_TUNER },
+	{ 0x40, KEY_1 },
+	{ 0x60, KEY_2 },
+	{ 0x50, KEY_3 },
+	{ 0x70, KEY_4 },
+	{ 0x48, KEY_5 },
+	{ 0x68, KEY_6 },
+	{ 0x58, KEY_7 },
+	{ 0x78, KEY_8 },
+	{ 0x44, KEY_9 },
+	{ 0x54, KEY_0 },
+
+	{ 0x64, KEY_LAST },		/* +100 */
+	{ 0x4e, KEY_AGAIN },		/* Recall */
+
+	{ 0x6c, KEY_SWITCHVIDEOMODE },	/* Video Source */
+	{ 0x5e, KEY_MENU },
+	{ 0x56, KEY_SCREEN },
+	{ 0x7a, KEY_SETUP },
+
+	{ 0x46, KEY_MUTE },
+	{ 0x5c, KEY_MODE },		/* Stereo */
+	{ 0x74, KEY_INFO },
+	{ 0x7c, KEY_CLEAR },
+
+	{ 0x55, KEY_UP },
+	{ 0x49, KEY_DOWN },
+	{ 0x7e, KEY_LEFT },
+	{ 0x59, KEY_RIGHT },
+	{ 0x6a, KEY_ENTER },
+
+	{ 0x42, KEY_VOLUMEUP },
+	{ 0x62, KEY_VOLUMEDOWN },
+	{ 0x52, KEY_CHANNELUP },
+	{ 0x72, KEY_CHANNELDOWN },
+
+	{ 0x41, KEY_RECORD },
+	{ 0x51, KEY_CAMERA },		/* Snapshot */
+	{ 0x75, KEY_TIME },		/* Timeshift */
+	{ 0x71, KEY_TV2 },		/* PIP */
+
+	{ 0x45, KEY_REWIND },
+	{ 0x6f, KEY_PAUSE },
+	{ 0x7d, KEY_FORWARD },
+	{ 0x79, KEY_STOP },
+};
+
+static struct rc_keymap encore_enltv2_map = {
+	.map = {
+		.scan    = encore_enltv2,
+		.size    = ARRAY_SIZE(encore_enltv2),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_ENCORE_ENLTV2,
+	}
+};
+
+static int __init init_rc_map_encore_enltv2(void)
+{
+	return ir_register_map(&encore_enltv2_map);
+}
+
+static void __exit exit_rc_map_encore_enltv2(void)
+{
+	ir_unregister_map(&encore_enltv2_map);
+}
+
+module_init(init_rc_map_encore_enltv2)
+module_exit(exit_rc_map_encore_enltv2)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
new file mode 100644
index 000000000000..3f3fb13813b3
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -0,0 +1,61 @@
+/* evga-indtube.h - Keytable for evga_indtube Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* EVGA inDtube
+   Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+
+static struct ir_scancode evga_indtube[] = {
+	{ 0x12, KEY_POWER},
+	{ 0x02, KEY_MODE},	/* TV */
+	{ 0x14, KEY_MUTE},
+	{ 0x1a, KEY_CHANNELUP},
+	{ 0x16, KEY_TV2},	/* PIP */
+	{ 0x1d, KEY_VOLUMEUP},
+	{ 0x05, KEY_CHANNELDOWN},
+	{ 0x0f, KEY_PLAYPAUSE},
+	{ 0x19, KEY_VOLUMEDOWN},
+	{ 0x1c, KEY_REWIND},
+	{ 0x0d, KEY_RECORD},
+	{ 0x18, KEY_FORWARD},
+	{ 0x1e, KEY_PREVIOUS},
+	{ 0x1b, KEY_STOP},
+	{ 0x1f, KEY_NEXT},
+	{ 0x13, KEY_CAMERA},
+};
+
+static struct rc_keymap evga_indtube_map = {
+	.map = {
+		.scan    = evga_indtube,
+		.size    = ARRAY_SIZE(evga_indtube),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EVGA_INDTUBE,
+	}
+};
+
+static int __init init_rc_map_evga_indtube(void)
+{
+	return ir_register_map(&evga_indtube_map);
+}
+
+static void __exit exit_rc_map_evga_indtube(void)
+{
+	ir_unregister_map(&evga_indtube_map);
+}
+
+module_init(init_rc_map_evga_indtube)
+module_exit(exit_rc_map_evga_indtube)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
new file mode 100644
index 000000000000..660907a78db9
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -0,0 +1,96 @@
+/* eztv.h - Keytable for eztv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Alfons Geser <a.geser@cox.net>
+ * updates from Job D. R. Borges <jobdrb@ig.com.br> */
+
+static struct ir_scancode eztv[] = {
+	{ 0x12, KEY_POWER },
+	{ 0x01, KEY_TV },	/* DVR */
+	{ 0x15, KEY_DVD },	/* DVD */
+	{ 0x17, KEY_AUDIO },	/* music */
+				/* DVR mode / DVD mode / music mode */
+
+	{ 0x1b, KEY_MUTE },	/* mute */
+	{ 0x02, KEY_LANGUAGE },	/* MTS/SAP / audio / autoseek */
+	{ 0x1e, KEY_SUBTITLE },	/* closed captioning / subtitle / seek */
+	{ 0x16, KEY_ZOOM },	/* full screen */
+	{ 0x1c, KEY_VIDEO },	/* video source / eject / delall */
+	{ 0x1d, KEY_RESTART },	/* playback / angle / del */
+	{ 0x2f, KEY_SEARCH },	/* scan / menu / playlist */
+	{ 0x30, KEY_CHANNEL },	/* CH surfing / bookmark / memo */
+
+	{ 0x31, KEY_HELP },	/* help */
+	{ 0x32, KEY_MODE },	/* num/memo */
+	{ 0x33, KEY_ESC },	/* cancel */
+
+	{ 0x0c, KEY_UP },	/* up */
+	{ 0x10, KEY_DOWN },	/* down */
+	{ 0x08, KEY_LEFT },	/* left */
+	{ 0x04, KEY_RIGHT },	/* right */
+	{ 0x03, KEY_SELECT },	/* select */
+
+	{ 0x1f, KEY_REWIND },	/* rewind */
+	{ 0x20, KEY_PLAYPAUSE },/* play/pause */
+	{ 0x29, KEY_FORWARD },	/* forward */
+	{ 0x14, KEY_AGAIN },	/* repeat */
+	{ 0x2b, KEY_RECORD },	/* recording */
+	{ 0x2c, KEY_STOP },	/* stop */
+	{ 0x2d, KEY_PLAY },	/* play */
+	{ 0x2e, KEY_CAMERA },	/* snapshot / shuffle */
+
+	{ 0x00, KEY_0 },
+	{ 0x05, KEY_1 },
+	{ 0x06, KEY_2 },
+	{ 0x07, KEY_3 },
+	{ 0x09, KEY_4 },
+	{ 0x0a, KEY_5 },
+	{ 0x0b, KEY_6 },
+	{ 0x0d, KEY_7 },
+	{ 0x0e, KEY_8 },
+	{ 0x0f, KEY_9 },
+
+	{ 0x2a, KEY_VOLUMEUP },
+	{ 0x11, KEY_VOLUMEDOWN },
+	{ 0x18, KEY_CHANNELUP },/* CH.tracking up */
+	{ 0x19, KEY_CHANNELDOWN },/* CH.tracking down */
+
+	{ 0x13, KEY_ENTER },	/* enter */
+	{ 0x21, KEY_DOT },	/* . (decimal dot) */
+};
+
+static struct rc_keymap eztv_map = {
+	.map = {
+		.scan    = eztv,
+		.size    = ARRAY_SIZE(eztv),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EZTV,
+	}
+};
+
+static int __init init_rc_map_eztv(void)
+{
+	return ir_register_map(&eztv_map);
+}
+
+static void __exit exit_rc_map_eztv(void)
+{
+	ir_unregister_map(&eztv_map);
+}
+
+module_init(init_rc_map_eztv)
+module_exit(exit_rc_map_eztv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
new file mode 100644
index 000000000000..a173c81035f4
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -0,0 +1,77 @@
+/* flydvb.h - Keytable for flydvb Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode flydvb[] = {
+	{ 0x01, KEY_ZOOM },		/* Full Screen */
+	{ 0x00, KEY_POWER },		/* Power */
+
+	{ 0x03, KEY_1 },
+	{ 0x04, KEY_2 },
+	{ 0x05, KEY_3 },
+	{ 0x07, KEY_4 },
+	{ 0x08, KEY_5 },
+	{ 0x09, KEY_6 },
+	{ 0x0b, KEY_7 },
+	{ 0x0c, KEY_8 },
+	{ 0x0d, KEY_9 },
+	{ 0x06, KEY_AGAIN },		/* Recall */
+	{ 0x0f, KEY_0 },
+	{ 0x10, KEY_MUTE },		/* Mute */
+	{ 0x02, KEY_RADIO },		/* TV/Radio */
+	{ 0x1b, KEY_LANGUAGE },		/* SAP (Second Audio Program) */
+
+	{ 0x14, KEY_VOLUMEUP },		/* VOL+ */
+	{ 0x17, KEY_VOLUMEDOWN },	/* VOL- */
+	{ 0x12, KEY_CHANNELUP },	/* CH+ */
+	{ 0x13, KEY_CHANNELDOWN },	/* CH- */
+	{ 0x1d, KEY_ENTER },		/* Enter */
+
+	{ 0x1a, KEY_MODE },		/* PIP */
+	{ 0x18, KEY_TUNER },		/* Source */
+
+	{ 0x1e, KEY_RECORD },		/* Record/Pause */
+	{ 0x15, KEY_ANGLE },		/* Swap (no label on key) */
+	{ 0x1c, KEY_PAUSE },		/* Timeshift/Pause */
+	{ 0x19, KEY_BACK },		/* Rewind << */
+	{ 0x0a, KEY_PLAYPAUSE },	/* Play/Pause */
+	{ 0x1f, KEY_FORWARD },		/* Forward >> */
+	{ 0x16, KEY_PREVIOUS },		/* Back |<< */
+	{ 0x11, KEY_STOP },		/* Stop */
+	{ 0x0e, KEY_NEXT },		/* End >>| */
+};
+
+static struct rc_keymap flydvb_map = {
+	.map = {
+		.scan    = flydvb,
+		.size    = ARRAY_SIZE(flydvb),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_FLYDVB,
+	}
+};
+
+static int __init init_rc_map_flydvb(void)
+{
+	return ir_register_map(&flydvb_map);
+}
+
+static void __exit exit_rc_map_flydvb(void)
+{
+	ir_unregister_map(&flydvb_map);
+}
+
+module_init(init_rc_map_flydvb)
+module_exit(exit_rc_map_flydvb)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
new file mode 100644
index 000000000000..9c73043cbdba
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -0,0 +1,70 @@
+/* flyvideo.h - Keytable for flyvideo Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode flyvideo[] = {
+	{ 0x0f, KEY_0 },
+	{ 0x03, KEY_1 },
+	{ 0x04, KEY_2 },
+	{ 0x05, KEY_3 },
+	{ 0x07, KEY_4 },
+	{ 0x08, KEY_5 },
+	{ 0x09, KEY_6 },
+	{ 0x0b, KEY_7 },
+	{ 0x0c, KEY_8 },
+	{ 0x0d, KEY_9 },
+
+	{ 0x0e, KEY_MODE },	/* Air/Cable */
+	{ 0x11, KEY_VIDEO },	/* Video */
+	{ 0x15, KEY_AUDIO },	/* Audio */
+	{ 0x00, KEY_POWER },	/* Power */
+	{ 0x18, KEY_TUNER },	/* AV Source */
+	{ 0x02, KEY_ZOOM },	/* Fullscreen */
+	{ 0x1a, KEY_LANGUAGE },	/* Stereo */
+	{ 0x1b, KEY_MUTE },	/* Mute */
+	{ 0x14, KEY_VOLUMEUP },	/* Volume + */
+	{ 0x17, KEY_VOLUMEDOWN },/* Volume - */
+	{ 0x12, KEY_CHANNELUP },/* Channel + */
+	{ 0x13, KEY_CHANNELDOWN },/* Channel - */
+	{ 0x06, KEY_AGAIN },	/* Recall */
+	{ 0x10, KEY_ENTER },	/* Enter */
+
+	{ 0x19, KEY_BACK },	/* Rewind  ( <<< ) */
+	{ 0x1f, KEY_FORWARD },	/* Forward ( >>> ) */
+	{ 0x0a, KEY_ANGLE },	/* no label, may be used as the PAUSE button */
+};
+
+static struct rc_keymap flyvideo_map = {
+	.map = {
+		.scan    = flyvideo,
+		.size    = ARRAY_SIZE(flyvideo),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_FLYVIDEO,
+	}
+};
+
+static int __init init_rc_map_flyvideo(void)
+{
+	return ir_register_map(&flyvideo_map);
+}
+
+static void __exit exit_rc_map_flyvideo(void)
+{
+	ir_unregister_map(&flyvideo_map);
+}
+
+module_init(init_rc_map_flyvideo)
+module_exit(exit_rc_map_flyvideo)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
new file mode 100644
index 000000000000..cdb10389b10e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -0,0 +1,98 @@
+/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DViCO FUSION HDTV MCE remote */
+
+static struct ir_scancode fusionhdtv_mce[] = {
+
+	{ 0x0b, KEY_1 },
+	{ 0x17, KEY_2 },
+	{ 0x1b, KEY_3 },
+	{ 0x07, KEY_4 },
+	{ 0x50, KEY_5 },
+	{ 0x54, KEY_6 },
+	{ 0x48, KEY_7 },
+	{ 0x4c, KEY_8 },
+	{ 0x58, KEY_9 },
+	{ 0x03, KEY_0 },
+
+	{ 0x5e, KEY_OK },
+	{ 0x51, KEY_UP },
+	{ 0x53, KEY_DOWN },
+	{ 0x5b, KEY_LEFT },
+	{ 0x5f, KEY_RIGHT },
+
+	{ 0x02, KEY_TV },		/* Labeled DTV on remote */
+	{ 0x0e, KEY_MP3 },
+	{ 0x1a, KEY_DVD },
+	{ 0x1e, KEY_FAVORITES },	/* Labeled CPF on remote */
+	{ 0x16, KEY_SETUP },
+	{ 0x46, KEY_POWER2 },		/* TV On/Off button on remote */
+	{ 0x0a, KEY_EPG },		/* Labeled Guide on remote */
+
+	{ 0x49, KEY_BACK },
+	{ 0x59, KEY_INFO },		/* Labeled MORE on remote */
+	{ 0x4d, KEY_MENU },		/* Labeled DVDMENU on remote */
+	{ 0x55, KEY_CYCLEWINDOWS },	/* Labeled ALT-TAB on remote */
+
+	{ 0x0f, KEY_PREVIOUSSONG },	/* Labeled |<< REPLAY on remote */
+	{ 0x12, KEY_NEXTSONG },		/* Labeled >>| SKIP on remote */
+	{ 0x42, KEY_ENTER },		/* Labeled START with a green
+					   MS windows logo on remote */
+
+	{ 0x15, KEY_VOLUMEUP },
+	{ 0x05, KEY_VOLUMEDOWN },
+	{ 0x11, KEY_CHANNELUP },
+	{ 0x09, KEY_CHANNELDOWN },
+
+	{ 0x52, KEY_CAMERA },
+	{ 0x5a, KEY_TUNER },
+	{ 0x19, KEY_OPEN },
+
+	{ 0x13, KEY_MODE },		/* 4:3 16:9 select */
+	{ 0x1f, KEY_ZOOM },
+
+	{ 0x43, KEY_REWIND },
+	{ 0x47, KEY_PLAYPAUSE },
+	{ 0x4f, KEY_FASTFORWARD },
+	{ 0x57, KEY_MUTE },
+	{ 0x0d, KEY_STOP },
+	{ 0x01, KEY_RECORD },
+	{ 0x4e, KEY_POWER },
+};
+
+static struct rc_keymap fusionhdtv_mce_map = {
+	.map = {
+		.scan    = fusionhdtv_mce,
+		.size    = ARRAY_SIZE(fusionhdtv_mce),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_FUSIONHDTV_MCE,
+	}
+};
+
+static int __init init_rc_map_fusionhdtv_mce(void)
+{
+	return ir_register_map(&fusionhdtv_mce_map);
+}
+
+static void __exit exit_rc_map_fusionhdtv_mce(void)
+{
+	ir_unregister_map(&fusionhdtv_mce_map);
+}
+
+module_init(init_rc_map_fusionhdtv_mce)
+module_exit(exit_rc_map_fusionhdtv_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
new file mode 100644
index 000000000000..c16c0d1263ac
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -0,0 +1,81 @@
+/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* GADMEI UTV330+ RM008Z remote
+   Shine Liu <shinel@foxmail.com>
+ */
+
+static struct ir_scancode gadmei_rm008z[] = {
+	{ 0x14, KEY_POWER2},		/* POWER OFF */
+	{ 0x0c, KEY_MUTE},		/* MUTE */
+
+	{ 0x18, KEY_TV},		/* TV */
+	{ 0x0e, KEY_VIDEO},		/* AV */
+	{ 0x0b, KEY_AUDIO},		/* SV */
+	{ 0x0f, KEY_RADIO},		/* FM */
+
+	{ 0x00, KEY_1},
+	{ 0x01, KEY_2},
+	{ 0x02, KEY_3},
+	{ 0x03, KEY_4},
+	{ 0x04, KEY_5},
+	{ 0x05, KEY_6},
+	{ 0x06, KEY_7},
+	{ 0x07, KEY_8},
+	{ 0x08, KEY_9},
+	{ 0x09, KEY_0},
+	{ 0x0a, KEY_INFO},		/* OSD */
+	{ 0x1c, KEY_BACKSPACE},		/* LAST */
+
+	{ 0x0d, KEY_PLAY},		/* PLAY */
+	{ 0x1e, KEY_CAMERA},		/* SNAPSHOT */
+	{ 0x1a, KEY_RECORD},		/* RECORD */
+	{ 0x17, KEY_STOP},		/* STOP */
+
+	{ 0x1f, KEY_UP},		/* UP */
+	{ 0x44, KEY_DOWN},		/* DOWN */
+	{ 0x46, KEY_TAB},		/* BACK */
+	{ 0x4a, KEY_ZOOM},		/* FULLSECREEN */
+
+	{ 0x10, KEY_VOLUMEUP},		/* VOLUMEUP */
+	{ 0x11, KEY_VOLUMEDOWN},	/* VOLUMEDOWN */
+	{ 0x12, KEY_CHANNELUP},		/* CHANNELUP */
+	{ 0x13, KEY_CHANNELDOWN},	/* CHANNELDOWN */
+	{ 0x15, KEY_ENTER},		/* OK */
+};
+
+static struct rc_keymap gadmei_rm008z_map = {
+	.map = {
+		.scan    = gadmei_rm008z,
+		.size    = ARRAY_SIZE(gadmei_rm008z),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_GADMEI_RM008Z,
+	}
+};
+
+static int __init init_rc_map_gadmei_rm008z(void)
+{
+	return ir_register_map(&gadmei_rm008z_map);
+}
+
+static void __exit exit_rc_map_gadmei_rm008z(void)
+{
+	ir_unregister_map(&gadmei_rm008z_map);
+}
+
+module_init(init_rc_map_gadmei_rm008z)
+module_exit(exit_rc_map_gadmei_rm008z)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
new file mode 100644
index 000000000000..89f8e384e52a
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -0,0 +1,84 @@
+/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Remote control for the Genius TVGO A11MCE
+ * Adrian Pardini <pardo.bsso@gmail.com>
+ */
+
+static struct ir_scancode genius_tvgo_a11mce[] = {
+	/* Keys 0 to 9 */
+	{ 0x48, KEY_0 },
+	{ 0x09, KEY_1 },
+	{ 0x1d, KEY_2 },
+	{ 0x1f, KEY_3 },
+	{ 0x19, KEY_4 },
+	{ 0x1b, KEY_5 },
+	{ 0x11, KEY_6 },
+	{ 0x17, KEY_7 },
+	{ 0x12, KEY_8 },
+	{ 0x16, KEY_9 },
+
+	{ 0x54, KEY_RECORD },		/* recording */
+	{ 0x06, KEY_MUTE },		/* mute */
+	{ 0x10, KEY_POWER },
+	{ 0x40, KEY_LAST },		/* recall */
+	{ 0x4c, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x00, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x0d, KEY_VOLUMEUP },
+	{ 0x15, KEY_VOLUMEDOWN },
+	{ 0x4d, KEY_OK },		/* also labeled as Pause */
+	{ 0x1c, KEY_ZOOM },		/* full screen and Stop*/
+	{ 0x02, KEY_MODE },		/* AV Source or Rewind*/
+	{ 0x04, KEY_LIST },		/* -/-- */
+	/* small arrows above numbers */
+	{ 0x1a, KEY_NEXT },		/* also Fast Forward */
+	{ 0x0e, KEY_PREVIOUS },		/* also Rewind */
+	/* these are in a rather non standard layout and have
+	an alternate name written */
+	{ 0x1e, KEY_UP },		/* Video Setting */
+	{ 0x0a, KEY_DOWN },		/* Video Default */
+	{ 0x05, KEY_CAMERA },		/* Snapshot */
+	{ 0x0c, KEY_RIGHT },		/* Hide Panel */
+	/* Four buttons without label */
+	{ 0x49, KEY_RED },
+	{ 0x0b, KEY_GREEN },
+	{ 0x13, KEY_YELLOW },
+	{ 0x50, KEY_BLUE },
+};
+
+static struct rc_keymap genius_tvgo_a11mce_map = {
+	.map = {
+		.scan    = genius_tvgo_a11mce,
+		.size    = ARRAY_SIZE(genius_tvgo_a11mce),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_GENIUS_TVGO_A11MCE,
+	}
+};
+
+static int __init init_rc_map_genius_tvgo_a11mce(void)
+{
+	return ir_register_map(&genius_tvgo_a11mce_map);
+}
+
+static void __exit exit_rc_map_genius_tvgo_a11mce(void)
+{
+	ir_unregister_map(&genius_tvgo_a11mce_map);
+}
+
+module_init(init_rc_map_genius_tvgo_a11mce)
+module_exit(exit_rc_map_genius_tvgo_a11mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
new file mode 100644
index 000000000000..52f025bb35f6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -0,0 +1,79 @@
+/* gotview7135.h - Keytable for gotview7135 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mike Baikov <mike@baikov.com> */
+
+static struct ir_scancode gotview7135[] = {
+
+	{ 0x11, KEY_POWER },
+	{ 0x35, KEY_TV },
+	{ 0x1b, KEY_0 },
+	{ 0x29, KEY_1 },
+	{ 0x19, KEY_2 },
+	{ 0x39, KEY_3 },
+	{ 0x1f, KEY_4 },
+	{ 0x2c, KEY_5 },
+	{ 0x21, KEY_6 },
+	{ 0x24, KEY_7 },
+	{ 0x18, KEY_8 },
+	{ 0x2b, KEY_9 },
+	{ 0x3b, KEY_AGAIN },	/* LOOP */
+	{ 0x06, KEY_AUDIO },
+	{ 0x31, KEY_PRINT },	/* PREVIEW */
+	{ 0x3e, KEY_VIDEO },
+	{ 0x10, KEY_CHANNELUP },
+	{ 0x20, KEY_CHANNELDOWN },
+	{ 0x0c, KEY_VOLUMEDOWN },
+	{ 0x28, KEY_VOLUMEUP },
+	{ 0x08, KEY_MUTE },
+	{ 0x26, KEY_SEARCH },	/* SCAN */
+	{ 0x3f, KEY_CAMERA },	/* SNAPSHOT */
+	{ 0x12, KEY_RECORD },
+	{ 0x32, KEY_STOP },
+	{ 0x3c, KEY_PLAY },
+	{ 0x1d, KEY_REWIND },
+	{ 0x2d, KEY_PAUSE },
+	{ 0x0d, KEY_FORWARD },
+	{ 0x05, KEY_ZOOM },	/*FULL*/
+
+	{ 0x2a, KEY_F21 },	/* LIVE TIMESHIFT */
+	{ 0x0e, KEY_F22 },	/* MIN TIMESHIFT */
+	{ 0x1e, KEY_TIME },	/* TIMESHIFT */
+	{ 0x38, KEY_F24 },	/* NORMAL TIMESHIFT */
+};
+
+static struct rc_keymap gotview7135_map = {
+	.map = {
+		.scan    = gotview7135,
+		.size    = ARRAY_SIZE(gotview7135),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_GOTVIEW7135,
+	}
+};
+
+static int __init init_rc_map_gotview7135(void)
+{
+	return ir_register_map(&gotview7135_map);
+}
+
+static void __exit exit_rc_map_gotview7135(void)
+{
+	ir_unregister_map(&gotview7135_map);
+}
+
+module_init(init_rc_map_gotview7135)
+module_exit(exit_rc_map_gotview7135)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
new file mode 100644
index 000000000000..c6f8cd7c5186
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c
@@ -0,0 +1,100 @@
+/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Hauppauge: the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ * almost rc5 coding, but some non-standard keys */
+
+static struct ir_scancode hauppauge_new[] = {
+	/* Keys 0 to 9 */
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0a, KEY_TEXT },		/* keypad asterisk as well */
+	{ 0x0b, KEY_RED },		/* red button */
+	{ 0x0c, KEY_RADIO },
+	{ 0x0d, KEY_MENU },
+	{ 0x0e, KEY_SUBTITLE },		/* also the # key */
+	{ 0x0f, KEY_MUTE },
+	{ 0x10, KEY_VOLUMEUP },
+	{ 0x11, KEY_VOLUMEDOWN },
+	{ 0x12, KEY_PREVIOUS },		/* previous channel */
+	{ 0x14, KEY_UP },
+	{ 0x15, KEY_DOWN },
+	{ 0x16, KEY_LEFT },
+	{ 0x17, KEY_RIGHT },
+	{ 0x18, KEY_VIDEO },		/* Videos */
+	{ 0x19, KEY_AUDIO },		/* Music */
+	/* 0x1a: Pictures - presume this means
+	   "Multimedia Home Platform" -
+	   no "PICTURES" key in input.h
+	 */
+	{ 0x1a, KEY_MHP },
+
+	{ 0x1b, KEY_EPG },		/* Guide */
+	{ 0x1c, KEY_TV },
+	{ 0x1e, KEY_NEXTSONG },		/* skip >| */
+	{ 0x1f, KEY_EXIT },		/* back/exit */
+	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x22, KEY_CHANNEL },		/* source (old black remote) */
+	{ 0x24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x25, KEY_ENTER },		/* OK */
+	{ 0x26, KEY_SLEEP },		/* minimize (old black remote) */
+	{ 0x29, KEY_BLUE },		/* blue key */
+	{ 0x2e, KEY_GREEN },		/* green button */
+	{ 0x30, KEY_PAUSE },		/* pause */
+	{ 0x32, KEY_REWIND },		/* backward << */
+	{ 0x34, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x35, KEY_PLAY },
+	{ 0x36, KEY_STOP },
+	{ 0x37, KEY_RECORD },		/* recording */
+	{ 0x38, KEY_YELLOW },		/* yellow key */
+	{ 0x3b, KEY_SELECT },		/* top right button */
+	{ 0x3c, KEY_ZOOM },		/* full */
+	{ 0x3d, KEY_POWER },		/* system power (green button) */
+};
+
+static struct rc_keymap hauppauge_new_map = {
+	.map = {
+		.scan    = hauppauge_new,
+		.size    = ARRAY_SIZE(hauppauge_new),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_HAUPPAUGE_NEW,
+	}
+};
+
+static int __init init_rc_map_hauppauge_new(void)
+{
+	return ir_register_map(&hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_hauppauge_new(void)
+{
+	ir_unregister_map(&hauppauge_new_map);
+}
+
+module_init(init_rc_map_hauppauge_new)
+module_exit(exit_rc_map_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
new file mode 100644
index 000000000000..e49f350e3a0d
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -0,0 +1,142 @@
+/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use
+ * with the SoundGraph iMON/Antec Veris hardware IR decoder
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* mce-mode imon mce remote key table */
+static struct ir_scancode imon_mce[] = {
+	/* keys sorted mostly by frequency of use to optimize lookups */
+	{ 0x800ff415, KEY_REWIND },
+	{ 0x800ff414, KEY_FASTFORWARD },
+	{ 0x800ff41b, KEY_PREVIOUS },
+	{ 0x800ff41a, KEY_NEXT },
+
+	{ 0x800ff416, KEY_PLAY },
+	{ 0x800ff418, KEY_PAUSE },
+	{ 0x800ff419, KEY_STOP },
+	{ 0x800ff417, KEY_RECORD },
+
+	{ 0x02000052, KEY_UP },
+	{ 0x02000051, KEY_DOWN },
+	{ 0x02000050, KEY_LEFT },
+	{ 0x0200004f, KEY_RIGHT },
+
+	{ 0x800ff41e, KEY_UP },
+	{ 0x800ff41f, KEY_DOWN },
+	{ 0x800ff420, KEY_LEFT },
+	{ 0x800ff421, KEY_RIGHT },
+
+	/* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */
+	{ 0x800ff40b, KEY_ENTER },
+	{ 0x02000028, KEY_ENTER },
+/* the OK and Enter buttons decode to the same value on some remotes
+	{ 0x02000028, KEY_OK }, */
+	{ 0x800ff422, KEY_OK },
+	{ 0x0200002a, KEY_EXIT },
+	{ 0x800ff423, KEY_EXIT },
+	{ 0x02000029, KEY_DELETE },
+	/* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */
+	{ 0x800ff40a, KEY_DELETE },
+
+	{ 0x800ff40e, KEY_MUTE },
+	{ 0x800ff410, KEY_VOLUMEUP },
+	{ 0x800ff411, KEY_VOLUMEDOWN },
+	{ 0x800ff412, KEY_CHANNELUP },
+	{ 0x800ff413, KEY_CHANNELDOWN },
+
+	{ 0x0200001e, KEY_NUMERIC_1 },
+	{ 0x0200001f, KEY_NUMERIC_2 },
+	{ 0x02000020, KEY_NUMERIC_3 },
+	{ 0x02000021, KEY_NUMERIC_4 },
+	{ 0x02000022, KEY_NUMERIC_5 },
+	{ 0x02000023, KEY_NUMERIC_6 },
+	{ 0x02000024, KEY_NUMERIC_7 },
+	{ 0x02000025, KEY_NUMERIC_8 },
+	{ 0x02000026, KEY_NUMERIC_9 },
+	{ 0x02000027, KEY_NUMERIC_0 },
+
+	{ 0x800ff401, KEY_NUMERIC_1 },
+	{ 0x800ff402, KEY_NUMERIC_2 },
+	{ 0x800ff403, KEY_NUMERIC_3 },
+	{ 0x800ff404, KEY_NUMERIC_4 },
+	{ 0x800ff405, KEY_NUMERIC_5 },
+	{ 0x800ff406, KEY_NUMERIC_6 },
+	{ 0x800ff407, KEY_NUMERIC_7 },
+	{ 0x800ff408, KEY_NUMERIC_8 },
+	{ 0x800ff409, KEY_NUMERIC_9 },
+	{ 0x800ff400, KEY_NUMERIC_0 },
+
+	{ 0x02200025, KEY_NUMERIC_STAR },
+	{ 0x02200020, KEY_NUMERIC_POUND },
+	/* 0x800ff41d also KEY_BLUE on some receivers */
+	{ 0x800ff41d, KEY_NUMERIC_STAR },
+	/* 0x800ff41c also KEY_PREVIOUS on some receivers */
+	{ 0x800ff41c, KEY_NUMERIC_POUND },
+
+	{ 0x800ff446, KEY_TV },
+	{ 0x800ff447, KEY_AUDIO }, /* My Music */
+	{ 0x800ff448, KEY_PVR }, /* RecordedTV */
+	{ 0x800ff449, KEY_CAMERA },
+	{ 0x800ff44a, KEY_VIDEO },
+	/* 0x800ff424 also KEY_MENU on some receivers */
+	{ 0x800ff424, KEY_DVD },
+	/* 0x800ff425 also KEY_GREEN on some receivers */
+	{ 0x800ff425, KEY_TUNER }, /* LiveTV */
+	{ 0x800ff450, KEY_RADIO },
+
+	{ 0x800ff44c, KEY_LANGUAGE },
+	{ 0x800ff427, KEY_ZOOM }, /* Aspect */
+
+	{ 0x800ff45b, KEY_RED },
+	{ 0x800ff45c, KEY_GREEN },
+	{ 0x800ff45d, KEY_YELLOW },
+	{ 0x800ff45e, KEY_BLUE },
+
+	{ 0x800ff466, KEY_RED },
+	/* { 0x800ff425, KEY_GREEN }, */
+	{ 0x800ff468, KEY_YELLOW },
+	/* { 0x800ff41d, KEY_BLUE }, */
+
+	{ 0x800ff40f, KEY_INFO },
+	{ 0x800ff426, KEY_EPG }, /* Guide */
+	{ 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */
+	{ 0x800ff44d, KEY_TITLE },
+
+	{ 0x800ff40c, KEY_POWER },
+	{ 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */
+
+};
+
+static struct rc_keymap imon_mce_map = {
+	.map = {
+		.scan    = imon_mce,
+		.size    = ARRAY_SIZE(imon_mce),
+		/* its RC6, but w/a hardware decoder */
+		.ir_type = IR_TYPE_RC6,
+		.name    = RC_MAP_IMON_MCE,
+	}
+};
+
+static int __init init_rc_map_imon_mce(void)
+{
+	return ir_register_map(&imon_mce_map);
+}
+
+static void __exit exit_rc_map_imon_mce(void)
+{
+	ir_unregister_map(&imon_mce_map);
+}
+
+module_init(init_rc_map_imon_mce)
+module_exit(exit_rc_map_imon_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
new file mode 100644
index 000000000000..bc4db72f02e6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -0,0 +1,156 @@
+/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris
+ * RM-200 Remote Control
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * standard imon remote key table, which isn't really entirely
+ * "standard", as different receivers decode the same key on the
+ * same remote to different hex codes, and the silkscreened names
+ * vary a bit between the SoundGraph and Antec remotes... ugh.
+ */
+static struct ir_scancode imon_pad[] = {
+	/* keys sorted mostly by frequency of use to optimize lookups */
+	{ 0x2a8195b7, KEY_REWIND },
+	{ 0x298315b7, KEY_REWIND },
+	{ 0x2b8115b7, KEY_FASTFORWARD },
+	{ 0x2b8315b7, KEY_FASTFORWARD },
+	{ 0x2b9115b7, KEY_PREVIOUS },
+	{ 0x298195b7, KEY_NEXT },
+
+	{ 0x2a8115b7, KEY_PLAY },
+	{ 0x2a8315b7, KEY_PLAY },
+	{ 0x2a9115b7, KEY_PAUSE },
+	{ 0x2b9715b7, KEY_STOP },
+	{ 0x298115b7, KEY_RECORD },
+
+	{ 0x01008000, KEY_UP },
+	{ 0x01007f00, KEY_DOWN },
+	{ 0x01000080, KEY_LEFT },
+	{ 0x0100007f, KEY_RIGHT },
+
+	{ 0x2aa515b7, KEY_UP },
+	{ 0x289515b7, KEY_DOWN },
+	{ 0x29a515b7, KEY_LEFT },
+	{ 0x2ba515b7, KEY_RIGHT },
+
+	{ 0x0200002c, KEY_SPACE }, /* Select/Space */
+	{ 0x2a9315b7, KEY_SPACE }, /* Select/Space */
+	{ 0x02000028, KEY_ENTER },
+	{ 0x28a195b7, KEY_ENTER },
+	{ 0x288195b7, KEY_EXIT },
+	{ 0x02000029, KEY_ESC },
+	{ 0x2bb715b7, KEY_ESC },
+	{ 0x0200002a, KEY_BACKSPACE },
+	{ 0x28a115b7, KEY_BACKSPACE },
+
+	{ 0x2b9595b7, KEY_MUTE },
+	{ 0x28a395b7, KEY_VOLUMEUP },
+	{ 0x28a595b7, KEY_VOLUMEDOWN },
+	{ 0x289395b7, KEY_CHANNELUP },
+	{ 0x288795b7, KEY_CHANNELDOWN },
+
+	{ 0x0200001e, KEY_NUMERIC_1 },
+	{ 0x0200001f, KEY_NUMERIC_2 },
+	{ 0x02000020, KEY_NUMERIC_3 },
+	{ 0x02000021, KEY_NUMERIC_4 },
+	{ 0x02000022, KEY_NUMERIC_5 },
+	{ 0x02000023, KEY_NUMERIC_6 },
+	{ 0x02000024, KEY_NUMERIC_7 },
+	{ 0x02000025, KEY_NUMERIC_8 },
+	{ 0x02000026, KEY_NUMERIC_9 },
+	{ 0x02000027, KEY_NUMERIC_0 },
+
+	{ 0x28b595b7, KEY_NUMERIC_1 },
+	{ 0x2bb195b7, KEY_NUMERIC_2 },
+	{ 0x28b195b7, KEY_NUMERIC_3 },
+	{ 0x2a8595b7, KEY_NUMERIC_4 },
+	{ 0x299595b7, KEY_NUMERIC_5 },
+	{ 0x2aa595b7, KEY_NUMERIC_6 },
+	{ 0x2b9395b7, KEY_NUMERIC_7 },
+	{ 0x2a8515b7, KEY_NUMERIC_8 },
+	{ 0x2aa115b7, KEY_NUMERIC_9 },
+	{ 0x2ba595b7, KEY_NUMERIC_0 },
+
+	{ 0x02200025, KEY_NUMERIC_STAR },
+	{ 0x28b515b7, KEY_NUMERIC_STAR },
+	{ 0x02200020, KEY_NUMERIC_POUND },
+	{ 0x29a115b7, KEY_NUMERIC_POUND },
+
+	{ 0x2b8515b7, KEY_VIDEO },
+	{ 0x299195b7, KEY_AUDIO },
+	{ 0x2ba115b7, KEY_CAMERA },
+	{ 0x28a515b7, KEY_TV },
+	{ 0x29a395b7, KEY_DVD },
+	{ 0x29a295b7, KEY_DVD },
+
+	/* the Menu key between DVD and Subtitle on the RM-200... */
+	{ 0x2ba385b7, KEY_MENU },
+	{ 0x2ba395b7, KEY_MENU },
+
+	{ 0x288515b7, KEY_BOOKMARKS },
+	{ 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */
+	{ 0x298595b7, KEY_SUBTITLE },
+	{ 0x2b8595b7, KEY_LANGUAGE },
+
+	{ 0x29a595b7, KEY_ZOOM },
+	{ 0x2aa395b7, KEY_SCREEN }, /* FullScreen */
+
+	{ 0x299115b7, KEY_KEYBOARD },
+	{ 0x299135b7, KEY_KEYBOARD },
+
+	{ 0x01010000, BTN_LEFT },
+	{ 0x01020000, BTN_RIGHT },
+	{ 0x01010080, BTN_LEFT },
+	{ 0x01020080, BTN_RIGHT },
+	{ 0x688301b7, BTN_LEFT },
+	{ 0x688481b7, BTN_RIGHT },
+
+	{ 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */
+	{ 0x2b8395b7, KEY_TIME }, /* Timer */
+
+	{ 0x289115b7, KEY_POWER },
+	{ 0x29b195b7, KEY_EJECTCD }, /* the one next to play */
+	{ 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */
+
+	{ 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */
+	{ 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/
+	{ 0x02000065, KEY_COMPOSE }, /* RightMenu */
+	{ 0x28b715b7, KEY_COMPOSE }, /* RightMenu */
+	{ 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */
+	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
+};
+
+static struct rc_keymap imon_pad_map = {
+	.map = {
+		.scan    = imon_pad,
+		.size    = ARRAY_SIZE(imon_pad),
+		/* actual protocol details unknown, hardware decoder */
+		.ir_type = IR_TYPE_OTHER,
+		.name    = RC_MAP_IMON_PAD,
+	}
+};
+
+static int __init init_rc_map_imon_pad(void)
+{
+	return ir_register_map(&imon_pad_map);
+}
+
+static void __exit exit_rc_map_imon_pad(void)
+{
+	ir_unregister_map(&imon_pad_map);
+}
+
+module_init(init_rc_map_imon_pad)
+module_exit(exit_rc_map_imon_pad)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
new file mode 100644
index 000000000000..ef6600259fc0
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -0,0 +1,88 @@
+/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* IO-DATA BCTV7E Remote */
+
+static struct ir_scancode iodata_bctv7e[] = {
+	{ 0x40, KEY_TV },
+	{ 0x20, KEY_RADIO },		/* FM */
+	{ 0x60, KEY_EPG },
+	{ 0x00, KEY_POWER },
+
+	/* Keys 0 to 9 */
+	{ 0x44, KEY_0 },		/* 10 */
+	{ 0x50, KEY_1 },
+	{ 0x30, KEY_2 },
+	{ 0x70, KEY_3 },
+	{ 0x48, KEY_4 },
+	{ 0x28, KEY_5 },
+	{ 0x68, KEY_6 },
+	{ 0x58, KEY_7 },
+	{ 0x38, KEY_8 },
+	{ 0x78, KEY_9 },
+
+	{ 0x10, KEY_L },		/* Live */
+	{ 0x08, KEY_TIME },		/* Time Shift */
+
+	{ 0x18, KEY_PLAYPAUSE },	/* Play */
+
+	{ 0x24, KEY_ENTER },		/* 11 */
+	{ 0x64, KEY_ESC },		/* 12 */
+	{ 0x04, KEY_M },		/* Multi */
+
+	{ 0x54, KEY_VIDEO },
+	{ 0x34, KEY_CHANNELUP },
+	{ 0x74, KEY_VOLUMEUP },
+	{ 0x14, KEY_MUTE },
+
+	{ 0x4c, KEY_VCR },		/* SVIDEO */
+	{ 0x2c, KEY_CHANNELDOWN },
+	{ 0x6c, KEY_VOLUMEDOWN },
+	{ 0x0c, KEY_ZOOM },
+
+	{ 0x5c, KEY_PAUSE },
+	{ 0x3c, KEY_RED },		/* || (red) */
+	{ 0x7c, KEY_RECORD },		/* recording */
+	{ 0x1c, KEY_STOP },
+
+	{ 0x41, KEY_REWIND },		/* backward << */
+	{ 0x21, KEY_PLAY },
+	{ 0x61, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x01, KEY_NEXT },		/* skip >| */
+};
+
+static struct rc_keymap iodata_bctv7e_map = {
+	.map = {
+		.scan    = iodata_bctv7e,
+		.size    = ARRAY_SIZE(iodata_bctv7e),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_IODATA_BCTV7E,
+	}
+};
+
+static int __init init_rc_map_iodata_bctv7e(void)
+{
+	return ir_register_map(&iodata_bctv7e_map);
+}
+
+static void __exit exit_rc_map_iodata_bctv7e(void)
+{
+	ir_unregister_map(&iodata_bctv7e_map);
+}
+
+module_init(init_rc_map_iodata_bctv7e)
+module_exit(exit_rc_map_iodata_bctv7e)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
new file mode 100644
index 000000000000..4c7883ba0f15
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -0,0 +1,87 @@
+/* kaiomy.h - Keytable for kaiomy Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kaiomy TVnPC U2
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode kaiomy[] = {
+	{ 0x43, KEY_POWER2},
+	{ 0x01, KEY_LIST},
+	{ 0x0b, KEY_ZOOM},
+	{ 0x03, KEY_POWER},
+
+	{ 0x04, KEY_1},
+	{ 0x08, KEY_2},
+	{ 0x02, KEY_3},
+
+	{ 0x0f, KEY_4},
+	{ 0x05, KEY_5},
+	{ 0x06, KEY_6},
+
+	{ 0x0c, KEY_7},
+	{ 0x0d, KEY_8},
+	{ 0x0a, KEY_9},
+
+	{ 0x11, KEY_0},
+
+	{ 0x09, KEY_CHANNELUP},
+	{ 0x07, KEY_CHANNELDOWN},
+
+	{ 0x0e, KEY_VOLUMEUP},
+	{ 0x13, KEY_VOLUMEDOWN},
+
+	{ 0x10, KEY_HOME},
+	{ 0x12, KEY_ENTER},
+
+	{ 0x14, KEY_RECORD},
+	{ 0x15, KEY_STOP},
+	{ 0x16, KEY_PLAY},
+	{ 0x17, KEY_MUTE},
+
+	{ 0x18, KEY_UP},
+	{ 0x19, KEY_DOWN},
+	{ 0x1a, KEY_LEFT},
+	{ 0x1b, KEY_RIGHT},
+
+	{ 0x1c, KEY_RED},
+	{ 0x1d, KEY_GREEN},
+	{ 0x1e, KEY_YELLOW},
+	{ 0x1f, KEY_BLUE},
+};
+
+static struct rc_keymap kaiomy_map = {
+	.map = {
+		.scan    = kaiomy,
+		.size    = ARRAY_SIZE(kaiomy),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_KAIOMY,
+	}
+};
+
+static int __init init_rc_map_kaiomy(void)
+{
+	return ir_register_map(&kaiomy_map);
+}
+
+static void __exit exit_rc_map_kaiomy(void)
+{
+	ir_unregister_map(&kaiomy_map);
+}
+
+module_init(init_rc_map_kaiomy)
+module_exit(exit_rc_map_kaiomy)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
new file mode 100644
index 000000000000..618c817374e6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -0,0 +1,83 @@
+/* kworld-315u.h - Keytable for kworld_315u Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kworld 315U
+ */
+
+static struct ir_scancode kworld_315u[] = {
+	{ 0x6143, KEY_POWER },
+	{ 0x6101, KEY_TUNER },		/* source */
+	{ 0x610b, KEY_ZOOM },
+	{ 0x6103, KEY_POWER2 },		/* shutdown */
+
+	{ 0x6104, KEY_1 },
+	{ 0x6108, KEY_2 },
+	{ 0x6102, KEY_3 },
+	{ 0x6109, KEY_CHANNELUP },
+
+	{ 0x610f, KEY_4 },
+	{ 0x6105, KEY_5 },
+	{ 0x6106, KEY_6 },
+	{ 0x6107, KEY_CHANNELDOWN },
+
+	{ 0x610c, KEY_7 },
+	{ 0x610d, KEY_8 },
+	{ 0x610a, KEY_9 },
+	{ 0x610e, KEY_VOLUMEUP },
+
+	{ 0x6110, KEY_LAST },
+	{ 0x6111, KEY_0 },
+	{ 0x6112, KEY_ENTER },
+	{ 0x6113, KEY_VOLUMEDOWN },
+
+	{ 0x6114, KEY_RECORD },
+	{ 0x6115, KEY_STOP },
+	{ 0x6116, KEY_PLAY },
+	{ 0x6117, KEY_MUTE },
+
+	{ 0x6118, KEY_UP },
+	{ 0x6119, KEY_DOWN },
+	{ 0x611a, KEY_LEFT },
+	{ 0x611b, KEY_RIGHT },
+
+	{ 0x611c, KEY_RED },
+	{ 0x611d, KEY_GREEN },
+	{ 0x611e, KEY_YELLOW },
+	{ 0x611f, KEY_BLUE },
+};
+
+static struct rc_keymap kworld_315u_map = {
+	.map = {
+		.scan    = kworld_315u,
+		.size    = ARRAY_SIZE(kworld_315u),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_KWORLD_315U,
+	}
+};
+
+static int __init init_rc_map_kworld_315u(void)
+{
+	return ir_register_map(&kworld_315u_map);
+}
+
+static void __exit exit_rc_map_kworld_315u(void)
+{
+	ir_unregister_map(&kworld_315u_map);
+}
+
+module_init(init_rc_map_kworld_315u)
+module_exit(exit_rc_map_kworld_315u)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
new file mode 100644
index 000000000000..366732f1f7b7
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -0,0 +1,99 @@
+/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kworld Plus TV Analog Lite PCI IR
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode kworld_plus_tv_analog[] = {
+	{ 0x0c, KEY_PROG1 },		/* Kworld key */
+	{ 0x16, KEY_CLOSECD },		/* -> ) */
+	{ 0x1d, KEY_POWER2 },
+
+	{ 0x00, KEY_1 },
+	{ 0x01, KEY_2 },
+	{ 0x02, KEY_3 },		/* Two keys have the same code: 3 and left */
+	{ 0x03, KEY_4 },		/* Two keys have the same code: 3 and right */
+	{ 0x04, KEY_5 },
+	{ 0x05, KEY_6 },
+	{ 0x06, KEY_7 },
+	{ 0x07, KEY_8 },
+	{ 0x08, KEY_9 },
+	{ 0x0a, KEY_0 },
+
+	{ 0x09, KEY_AGAIN },
+	{ 0x14, KEY_MUTE },
+
+	{ 0x20, KEY_UP },
+	{ 0x21, KEY_DOWN },
+	{ 0x0b, KEY_ENTER },
+
+	{ 0x10, KEY_CHANNELUP },
+	{ 0x11, KEY_CHANNELDOWN },
+
+	/* Couldn't map key left/key right since those
+	   conflict with '3' and '4' scancodes
+	   I dunno what the original driver does
+	 */
+
+	{ 0x13, KEY_VOLUMEUP },
+	{ 0x12, KEY_VOLUMEDOWN },
+
+	/* The lower part of the IR
+	   There are several duplicated keycodes there.
+	   Most of them conflict with digits.
+	   Add mappings just to the unused scancodes.
+	   Somehow, the original driver has a way to know,
+	   but this doesn't seem to be on some GPIO.
+	   Also, it is not related to the time between keyup
+	   and keydown.
+	 */
+	{ 0x19, KEY_TIME},		/* Timeshift */
+	{ 0x1a, KEY_STOP},
+	{ 0x1b, KEY_RECORD},
+
+	{ 0x22, KEY_TEXT},
+
+	{ 0x15, KEY_AUDIO},		/* ((*)) */
+	{ 0x0f, KEY_ZOOM},
+	{ 0x1c, KEY_CAMERA},		/* snapshot */
+
+	{ 0x18, KEY_RED},		/* B */
+	{ 0x23, KEY_GREEN},		/* C */
+};
+
+static struct rc_keymap kworld_plus_tv_analog_map = {
+	.map = {
+		.scan    = kworld_plus_tv_analog,
+		.size    = ARRAY_SIZE(kworld_plus_tv_analog),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_KWORLD_PLUS_TV_ANALOG,
+	}
+};
+
+static int __init init_rc_map_kworld_plus_tv_analog(void)
+{
+	return ir_register_map(&kworld_plus_tv_analog_map);
+}
+
+static void __exit exit_rc_map_kworld_plus_tv_analog(void)
+{
+	ir_unregister_map(&kworld_plus_tv_analog_map);
+}
+
+module_init(init_rc_map_kworld_plus_tv_analog)
+module_exit(exit_rc_map_kworld_plus_tv_analog)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
new file mode 100644
index 000000000000..7521315fd876
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -0,0 +1,99 @@
+/*
+ * LeadTek Y04G0051 remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode leadtek_y04g0051[] = {
+	{ 0x0300, KEY_POWER2 },
+	{ 0x0303, KEY_SCREEN },
+	{ 0x0304, KEY_RIGHT },
+	{ 0x0305, KEY_1 },
+	{ 0x0306, KEY_2 },
+	{ 0x0307, KEY_3 },
+	{ 0x0308, KEY_LEFT },
+	{ 0x0309, KEY_4 },
+	{ 0x030a, KEY_5 },
+	{ 0x030b, KEY_6 },
+	{ 0x030c, KEY_UP },
+	{ 0x030d, KEY_7 },
+	{ 0x030e, KEY_8 },
+	{ 0x030f, KEY_9 },
+	{ 0x0310, KEY_DOWN },
+	{ 0x0311, KEY_AGAIN },
+	{ 0x0312, KEY_0 },
+	{ 0x0313, KEY_OK },              /* 1st ok */
+	{ 0x0314, KEY_MUTE },
+	{ 0x0316, KEY_OK },              /* 2nd ok */
+	{ 0x031e, KEY_VIDEO },           /* 2nd video */
+	{ 0x031b, KEY_AUDIO },
+	{ 0x031f, KEY_TEXT },
+	{ 0x0340, KEY_SLEEP },
+	{ 0x0341, KEY_DOT },
+	{ 0x0342, KEY_REWIND },
+	{ 0x0343, KEY_PLAY },
+	{ 0x0344, KEY_FASTFORWARD },
+	{ 0x0345, KEY_TIME },
+	{ 0x0346, KEY_STOP },            /* 2nd stop */
+	{ 0x0347, KEY_RECORD },
+	{ 0x0348, KEY_CAMERA },
+	{ 0x0349, KEY_ESC },
+	{ 0x034a, KEY_NEW },
+	{ 0x034b, KEY_RED },
+	{ 0x034c, KEY_GREEN },
+	{ 0x034d, KEY_YELLOW },
+	{ 0x034e, KEY_BLUE },
+	{ 0x034f, KEY_MENU },
+	{ 0x0350, KEY_STOP },            /* 1st stop */
+	{ 0x0351, KEY_CHANNEL },
+	{ 0x0352, KEY_VIDEO },           /* 1st video */
+	{ 0x0353, KEY_EPG },
+	{ 0x0354, KEY_PREVIOUS },
+	{ 0x0355, KEY_NEXT },
+	{ 0x0356, KEY_TV },
+	{ 0x035a, KEY_VOLUMEDOWN },
+	{ 0x035b, KEY_CHANNELUP },
+	{ 0x035e, KEY_VOLUMEUP },
+	{ 0x035f, KEY_CHANNELDOWN },
+};
+
+static struct rc_keymap leadtek_y04g0051_map = {
+	.map = {
+		.scan    = leadtek_y04g0051,
+		.size    = ARRAY_SIZE(leadtek_y04g0051),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_LEADTEK_Y04G0051,
+	}
+};
+
+static int __init init_rc_map_leadtek_y04g0051(void)
+{
+	return ir_register_map(&leadtek_y04g0051_map);
+}
+
+static void __exit exit_rc_map_leadtek_y04g0051(void)
+{
+	ir_unregister_map(&leadtek_y04g0051_map);
+}
+
+module_init(init_rc_map_leadtek_y04g0051)
+module_exit(exit_rc_map_leadtek_y04g0051)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
new file mode 100644
index 000000000000..43fcf9035082
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -0,0 +1,41 @@
+/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
+ * all raw IR data to the lirc userspace decoder.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/ir-core.h>
+
+static struct ir_scancode lirc[] = {
+	{ },
+};
+
+static struct rc_keymap lirc_map = {
+	.map = {
+		.scan    = lirc,
+		.size    = ARRAY_SIZE(lirc),
+		.ir_type = IR_TYPE_LIRC,
+		.name    = RC_MAP_LIRC,
+	}
+};
+
+static int __init init_rc_map_lirc(void)
+{
+	return ir_register_map(&lirc_map);
+}
+
+static void __exit exit_rc_map_lirc(void)
+{
+	ir_unregister_map(&lirc_map);
+}
+
+module_init(init_rc_map_lirc)
+module_exit(exit_rc_map_lirc)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
new file mode 100644
index 000000000000..40dcf0b4e21a
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -0,0 +1,68 @@
+/* LME2510 remote control
+ *
+ *
+ * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+
+static struct ir_scancode lme2510_rc[] = {
+	{ 0xba45, KEY_0 },
+	{ 0xa05f, KEY_1 },
+	{ 0xaf50, KEY_2 },
+	{ 0xa25d, KEY_3 },
+	{ 0xbe41, KEY_4 },
+	{ 0xf50a, KEY_5 },
+	{ 0xbd42, KEY_6 },
+	{ 0xb847, KEY_7 },
+	{ 0xb649, KEY_8 },
+	{ 0xfa05, KEY_9 },
+	{ 0xbc43, KEY_POWER },
+	{ 0xb946, KEY_SUBTITLE },
+	{ 0xf906, KEY_PAUSE },
+	{ 0xfc03, KEY_MEDIA_REPEAT},
+	{ 0xfd02, KEY_PAUSE },
+	{ 0xa15e, KEY_VOLUMEUP },
+	{ 0xa35c, KEY_VOLUMEDOWN },
+	{ 0xf609, KEY_CHANNELUP },
+	{ 0xe51a, KEY_CHANNELDOWN },
+	{ 0xe11e, KEY_PLAY },
+	{ 0xe41b, KEY_ZOOM },
+	{ 0xa659, KEY_MUTE },
+	{ 0xa55a, KEY_TV },
+	{ 0xe718, KEY_RECORD },
+	{ 0xf807, KEY_EPG },
+	{ 0xfe01, KEY_STOP },
+
+};
+
+static struct rc_keymap lme2510_map = {
+	.map = {
+		.scan    = lme2510_rc,
+		.size    = ARRAY_SIZE(lme2510_rc),
+		.ir_type = IR_TYPE_UNKNOWN,
+		.name    = RC_MAP_LME2510,
+	}
+};
+
+static int __init init_rc_lme2510_map(void)
+{
+	return ir_register_map(&lme2510_map);
+}
+
+static void __exit exit_rc_lme2510_map(void)
+{
+	ir_unregister_map(&lme2510_map);
+}
+
+module_init(init_rc_lme2510_map)
+module_exit(exit_rc_lme2510_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
new file mode 100644
index 000000000000..0f590b3d01c0
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -0,0 +1,134 @@
+/* manli.h - Keytable for manli Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Michael Tokarev <mjt@tls.msk.ru>
+   keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
+   least, and probably other cards too.
+   The "ascii-art picture" below (in comments, first row
+   is the keycode in hex, and subsequent row(s) shows
+   the button labels (several variants when appropriate)
+   helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode manli[] = {
+
+	/*  0x1c            0x12  *
+	 * FUNCTION         POWER *
+	 *   FM              (|)  *
+	 *                        */
+	{ 0x1c, KEY_RADIO },	/*XXX*/
+	{ 0x12, KEY_POWER },
+
+	/*  0x01    0x02    0x03  *
+	 *   1       2       3    *
+	 *                        *
+	 *  0x04    0x05    0x06  *
+	 *   4       5       6    *
+	 *                        *
+	 *  0x07    0x08    0x09  *
+	 *   7       8       9    *
+	 *                        */
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	/*  0x0a    0x00    0x17  *
+	 * RECALL    0      +100  *
+	 *                  PLUS  *
+	 *                        */
+	{ 0x0a, KEY_AGAIN },	/*XXX KEY_REWIND? */
+	{ 0x00, KEY_0 },
+	{ 0x17, KEY_DIGITS },	/*XXX*/
+
+	/*  0x14            0x10  *
+	 *  MENU            INFO  *
+	 *  OSD                   */
+	{ 0x14, KEY_MENU },
+	{ 0x10, KEY_INFO },
+
+	/*          0x0b          *
+	 *           Up           *
+	 *                        *
+	 *  0x18    0x16    0x0c  *
+	 *  Left     Ok     Right *
+	 *                        *
+	 *         0x015          *
+	 *         Down           *
+	 *                        */
+	{ 0x0b, KEY_UP },
+	{ 0x18, KEY_LEFT },
+	{ 0x16, KEY_OK },	/*XXX KEY_SELECT? KEY_ENTER? */
+	{ 0x0c, KEY_RIGHT },
+	{ 0x15, KEY_DOWN },
+
+	/*  0x11            0x0d  *
+	 *  TV/AV           MODE  *
+	 *  SOURCE         STEREO *
+	 *                        */
+	{ 0x11, KEY_TV },	/*XXX*/
+	{ 0x0d, KEY_MODE },	/*XXX there's no KEY_STEREO	*/
+
+	/*  0x0f    0x1b    0x1a  *
+	 *  AUDIO   Vol+    Chan+ *
+	 *        TIMESHIFT???    *
+	 *                        *
+	 *  0x0e    0x1f    0x1e  *
+	 *  SLEEP   Vol-    Chan- *
+	 *                        */
+	{ 0x0f, KEY_AUDIO },
+	{ 0x1b, KEY_VOLUMEUP },
+	{ 0x1a, KEY_CHANNELUP },
+	{ 0x0e, KEY_TIME },
+	{ 0x1f, KEY_VOLUMEDOWN },
+	{ 0x1e, KEY_CHANNELDOWN },
+
+	/*         0x13     0x19  *
+	 *         MUTE   SNAPSHOT*
+	 *                        */
+	{ 0x13, KEY_MUTE },
+	{ 0x19, KEY_CAMERA },
+
+	/* 0x1d unused ? */
+};
+
+static struct rc_keymap manli_map = {
+	.map = {
+		.scan    = manli,
+		.size    = ARRAY_SIZE(manli),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_MANLI,
+	}
+};
+
+static int __init init_rc_map_manli(void)
+{
+	return ir_register_map(&manli_map);
+}
+
+static void __exit exit_rc_map_manli(void)
+{
+	ir_unregister_map(&manli_map);
+}
+
+module_init(init_rc_map_manli)
+module_exit(exit_rc_map_manli)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
new file mode 100644
index 000000000000..67237fbf9e4b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -0,0 +1,67 @@
+/*
+ * MSI DIGIVOX mini II remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode msi_digivox_ii[] = {
+	{ 0x0002, KEY_2 },
+	{ 0x0003, KEY_UP },              /* up */
+	{ 0x0004, KEY_3 },
+	{ 0x0005, KEY_CHANNELDOWN },
+	{ 0x0008, KEY_5 },
+	{ 0x0009, KEY_0 },
+	{ 0x000b, KEY_8 },
+	{ 0x000d, KEY_DOWN },            /* down */
+	{ 0x0010, KEY_9 },
+	{ 0x0011, KEY_7 },
+	{ 0x0014, KEY_VOLUMEUP },
+	{ 0x0015, KEY_CHANNELUP },
+	{ 0x0016, KEY_OK },
+	{ 0x0017, KEY_POWER2 },
+	{ 0x001a, KEY_1 },
+	{ 0x001c, KEY_4 },
+	{ 0x001d, KEY_6 },
+	{ 0x001f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap msi_digivox_ii_map = {
+	.map = {
+		.scan    = msi_digivox_ii,
+		.size    = ARRAY_SIZE(msi_digivox_ii),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_MSI_DIGIVOX_II,
+	}
+};
+
+static int __init init_rc_map_msi_digivox_ii(void)
+{
+	return ir_register_map(&msi_digivox_ii_map);
+}
+
+static void __exit exit_rc_map_msi_digivox_ii(void)
+{
+	ir_unregister_map(&msi_digivox_ii_map);
+}
+
+module_init(init_rc_map_msi_digivox_ii)
+module_exit(exit_rc_map_msi_digivox_ii)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
new file mode 100644
index 000000000000..882056e52ef9
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -0,0 +1,85 @@
+/*
+ * MSI DIGIVOX mini III remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* MSI DIGIVOX mini III */
+/* Uses NEC extended 0x61d6. */
+/* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
+   since rc-kworld-315u.c lacks NEC extended address byte. */
+static struct ir_scancode msi_digivox_iii[] = {
+	{ 0x61d601, KEY_VIDEO },           /* Source */
+	{ 0x61d602, KEY_3 },
+	{ 0x61d603, KEY_POWER },           /* ShutDown */
+	{ 0x61d604, KEY_1 },
+	{ 0x61d605, KEY_5 },
+	{ 0x61d606, KEY_6 },
+	{ 0x61d607, KEY_CHANNELDOWN },     /* CH- */
+	{ 0x61d608, KEY_2 },
+	{ 0x61d609, KEY_CHANNELUP },       /* CH+ */
+	{ 0x61d60a, KEY_9 },
+	{ 0x61d60b, KEY_ZOOM },            /* Zoom */
+	{ 0x61d60c, KEY_7 },
+	{ 0x61d60d, KEY_8 },
+	{ 0x61d60e, KEY_VOLUMEUP },        /* Vol+ */
+	{ 0x61d60f, KEY_4 },
+	{ 0x61d610, KEY_ESC },             /* [back up arrow] */
+	{ 0x61d611, KEY_0 },
+	{ 0x61d612, KEY_OK },              /* [enter arrow] */
+	{ 0x61d613, KEY_VOLUMEDOWN },      /* Vol- */
+	{ 0x61d614, KEY_RECORD },          /* Rec */
+	{ 0x61d615, KEY_STOP },            /* Stop */
+	{ 0x61d616, KEY_PLAY },            /* Play */
+	{ 0x61d617, KEY_MUTE },            /* Mute */
+	{ 0x61d618, KEY_UP },
+	{ 0x61d619, KEY_DOWN },
+	{ 0x61d61a, KEY_LEFT },
+	{ 0x61d61b, KEY_RIGHT },
+	{ 0x61d61c, KEY_RED },
+	{ 0x61d61d, KEY_GREEN },
+	{ 0x61d61e, KEY_YELLOW },
+	{ 0x61d61f, KEY_BLUE },
+	{ 0x61d643, KEY_POWER2 },          /* [red power button] */
+};
+
+static struct rc_keymap msi_digivox_iii_map = {
+	.map = {
+		.scan    = msi_digivox_iii,
+		.size    = ARRAY_SIZE(msi_digivox_iii),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_MSI_DIGIVOX_III,
+	}
+};
+
+static int __init init_rc_map_msi_digivox_iii(void)
+{
+	return ir_register_map(&msi_digivox_iii_map);
+}
+
+static void __exit exit_rc_map_msi_digivox_iii(void)
+{
+	ir_unregister_map(&msi_digivox_iii_map);
+}
+
+module_init(init_rc_map_msi_digivox_iii)
+module_exit(exit_rc_map_msi_digivox_iii)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
new file mode 100644
index 000000000000..eb8e42c18ff9
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -0,0 +1,123 @@
+/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+  Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
+  is marked "KS003". The controller is I2C at address 0x30, but does not seem
+  to respond to probes until a read is performed from a valid device.
+  I don't know why...
+
+  Note: This remote may be of similar or identical design to the
+  Pixelview remote (?).  The raw codes and duplicate button codes
+  appear to be the same.
+
+  Henry Wong <henry@stuffedcow.net>
+  Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
+*/
+
+static struct ir_scancode msi_tvanywhere_plus[] = {
+
+/*  ---- Remote Button Layout ----
+
+    POWER   SOURCE  SCAN    MUTE
+    TV/FM   1       2       3
+    |>      4       5       6
+    <|      7       8       9
+    ^^UP    0       +       RECALL
+    vvDN    RECORD  STOP    PLAY
+
+	MINIMIZE          ZOOM
+
+		  CH+
+      VOL-                   VOL+
+		  CH-
+
+	SNAPSHOT           MTS
+
+     <<      FUNC    >>     RESET
+*/
+
+	{ 0x01, KEY_1 },		/* 1 */
+	{ 0x0b, KEY_2 },		/* 2 */
+	{ 0x1b, KEY_3 },		/* 3 */
+	{ 0x05, KEY_4 },		/* 4 */
+	{ 0x09, KEY_5 },		/* 5 */
+	{ 0x15, KEY_6 },		/* 6 */
+	{ 0x06, KEY_7 },		/* 7 */
+	{ 0x0a, KEY_8 },		/* 8 */
+	{ 0x12, KEY_9 },		/* 9 */
+	{ 0x02, KEY_0 },		/* 0 */
+	{ 0x10, KEY_KPPLUS },		/* + */
+	{ 0x13, KEY_AGAIN },		/* Recall */
+
+	{ 0x1e, KEY_POWER },		/* Power */
+	{ 0x07, KEY_TUNER },		/* Source */
+	{ 0x1c, KEY_SEARCH },		/* Scan */
+	{ 0x18, KEY_MUTE },		/* Mute */
+
+	{ 0x03, KEY_RADIO },		/* TV/FM */
+	/* The next four keys are duplicates that appear to send the
+	   same IR code as Ch+, Ch-, >>, and << .  The raw code assigned
+	   to them is the actual code + 0x20 - they will never be
+	   detected as such unless some way is discovered to distinguish
+	   these buttons from those that have the same code. */
+	{ 0x3f, KEY_RIGHT },		/* |> and Ch+ */
+	{ 0x37, KEY_LEFT },		/* <| and Ch- */
+	{ 0x2c, KEY_UP },		/* ^^Up and >> */
+	{ 0x24, KEY_DOWN },		/* vvDn and << */
+
+	{ 0x00, KEY_RECORD },		/* Record */
+	{ 0x08, KEY_STOP },		/* Stop */
+	{ 0x11, KEY_PLAY },		/* Play */
+
+	{ 0x0f, KEY_CLOSE },		/* Minimize */
+	{ 0x19, KEY_ZOOM },		/* Zoom */
+	{ 0x1a, KEY_CAMERA },		/* Snapshot */
+	{ 0x0d, KEY_LANGUAGE },		/* MTS */
+
+	{ 0x14, KEY_VOLUMEDOWN },	/* Vol- */
+	{ 0x16, KEY_VOLUMEUP },		/* Vol+ */
+	{ 0x17, KEY_CHANNELDOWN },	/* Ch- */
+	{ 0x1f, KEY_CHANNELUP },	/* Ch+ */
+
+	{ 0x04, KEY_REWIND },		/* << */
+	{ 0x0e, KEY_MENU },		/* Function */
+	{ 0x0c, KEY_FASTFORWARD },	/* >> */
+	{ 0x1d, KEY_RESTART },		/* Reset */
+};
+
+static struct rc_keymap msi_tvanywhere_plus_map = {
+	.map = {
+		.scan    = msi_tvanywhere_plus,
+		.size    = ARRAY_SIZE(msi_tvanywhere_plus),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_MSI_TVANYWHERE_PLUS,
+	}
+};
+
+static int __init init_rc_map_msi_tvanywhere_plus(void)
+{
+	return ir_register_map(&msi_tvanywhere_plus_map);
+}
+
+static void __exit exit_rc_map_msi_tvanywhere_plus(void)
+{
+	ir_unregister_map(&msi_tvanywhere_plus_map);
+}
+
+module_init(init_rc_map_msi_tvanywhere_plus)
+module_exit(exit_rc_map_msi_tvanywhere_plus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
new file mode 100644
index 000000000000..ef411854f067
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -0,0 +1,69 @@
+/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* MSI TV@nywhere MASTER remote */
+
+static struct ir_scancode msi_tvanywhere[] = {
+	/* Keys 0 to 9 */
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0c, KEY_MUTE },
+	{ 0x0f, KEY_SCREEN },		/* Full Screen */
+	{ 0x10, KEY_FN },		/* Funtion */
+	{ 0x11, KEY_TIME },		/* Time shift */
+	{ 0x12, KEY_POWER },
+	{ 0x13, KEY_MEDIA },		/* MTS */
+	{ 0x14, KEY_SLOW },
+	{ 0x16, KEY_REWIND },		/* backward << */
+	{ 0x17, KEY_ENTER },		/* Return */
+	{ 0x18, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x1a, KEY_CHANNELUP },
+	{ 0x1b, KEY_VOLUMEUP },
+	{ 0x1e, KEY_CHANNELDOWN },
+	{ 0x1f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap msi_tvanywhere_map = {
+	.map = {
+		.scan    = msi_tvanywhere,
+		.size    = ARRAY_SIZE(msi_tvanywhere),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_MSI_TVANYWHERE,
+	}
+};
+
+static int __init init_rc_map_msi_tvanywhere(void)
+{
+	return ir_register_map(&msi_tvanywhere_map);
+}
+
+static void __exit exit_rc_map_msi_tvanywhere(void)
+{
+	ir_unregister_map(&msi_tvanywhere_map);
+}
+
+module_init(init_rc_map_msi_tvanywhere)
+module_exit(exit_rc_map_msi_tvanywhere)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
new file mode 100644
index 000000000000..ccc50eb402ec
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -0,0 +1,96 @@
+/* nebula.h - Keytable for nebula Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode nebula[] = {
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+	{ 0x0a, KEY_TV },
+	{ 0x0b, KEY_AUX },
+	{ 0x0c, KEY_DVD },
+	{ 0x0d, KEY_POWER },
+	{ 0x0e, KEY_MHP },	/* labelled 'Picture' */
+	{ 0x0f, KEY_AUDIO },
+	{ 0x10, KEY_INFO },
+	{ 0x11, KEY_F13 },	/* 16:9 */
+	{ 0x12, KEY_F14 },	/* 14:9 */
+	{ 0x13, KEY_EPG },
+	{ 0x14, KEY_EXIT },
+	{ 0x15, KEY_MENU },
+	{ 0x16, KEY_UP },
+	{ 0x17, KEY_DOWN },
+	{ 0x18, KEY_LEFT },
+	{ 0x19, KEY_RIGHT },
+	{ 0x1a, KEY_ENTER },
+	{ 0x1b, KEY_CHANNELUP },
+	{ 0x1c, KEY_CHANNELDOWN },
+	{ 0x1d, KEY_VOLUMEUP },
+	{ 0x1e, KEY_VOLUMEDOWN },
+	{ 0x1f, KEY_RED },
+	{ 0x20, KEY_GREEN },
+	{ 0x21, KEY_YELLOW },
+	{ 0x22, KEY_BLUE },
+	{ 0x23, KEY_SUBTITLE },
+	{ 0x24, KEY_F15 },	/* AD */
+	{ 0x25, KEY_TEXT },
+	{ 0x26, KEY_MUTE },
+	{ 0x27, KEY_REWIND },
+	{ 0x28, KEY_STOP },
+	{ 0x29, KEY_PLAY },
+	{ 0x2a, KEY_FASTFORWARD },
+	{ 0x2b, KEY_F16 },	/* chapter */
+	{ 0x2c, KEY_PAUSE },
+	{ 0x2d, KEY_PLAY },
+	{ 0x2e, KEY_RECORD },
+	{ 0x2f, KEY_F17 },	/* picture in picture */
+	{ 0x30, KEY_KPPLUS },	/* zoom in */
+	{ 0x31, KEY_KPMINUS },	/* zoom out */
+	{ 0x32, KEY_F18 },	/* capture */
+	{ 0x33, KEY_F19 },	/* web */
+	{ 0x34, KEY_EMAIL },
+	{ 0x35, KEY_PHONE },
+	{ 0x36, KEY_PC },
+};
+
+static struct rc_keymap nebula_map = {
+	.map = {
+		.scan    = nebula,
+		.size    = ARRAY_SIZE(nebula),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_NEBULA,
+	}
+};
+
+static int __init init_rc_map_nebula(void)
+{
+	return ir_register_map(&nebula_map);
+}
+
+static void __exit exit_rc_map_nebula(void)
+{
+	ir_unregister_map(&nebula_map);
+}
+
+module_init(init_rc_map_nebula)
+module_exit(exit_rc_map_nebula)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
new file mode 100644
index 000000000000..e1b54d20db60
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -0,0 +1,105 @@
+/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Terratec Cinergy Hybrid T USB XS FM
+   Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+static struct ir_scancode nec_terratec_cinergy_xs[] = {
+	{ 0x1441, KEY_HOME},
+	{ 0x1401, KEY_POWER2},
+
+	{ 0x1442, KEY_MENU},		/* DVD menu */
+	{ 0x1443, KEY_SUBTITLE},
+	{ 0x1444, KEY_TEXT},		/* Teletext */
+	{ 0x1445, KEY_DELETE},
+
+	{ 0x1402, KEY_1},
+	{ 0x1403, KEY_2},
+	{ 0x1404, KEY_3},
+	{ 0x1405, KEY_4},
+	{ 0x1406, KEY_5},
+	{ 0x1407, KEY_6},
+	{ 0x1408, KEY_7},
+	{ 0x1409, KEY_8},
+	{ 0x140a, KEY_9},
+	{ 0x140c, KEY_0},
+
+	{ 0x140b, KEY_TUNER},		/* AV */
+	{ 0x140d, KEY_MODE},		/* A.B */
+
+	{ 0x1446, KEY_TV},
+	{ 0x1447, KEY_DVD},
+	{ 0x1449, KEY_VIDEO},
+	{ 0x144a, KEY_RADIO},		/* Music */
+	{ 0x144b, KEY_CAMERA},		/* PIC */
+
+	{ 0x1410, KEY_UP},
+	{ 0x1411, KEY_LEFT},
+	{ 0x1412, KEY_OK},
+	{ 0x1413, KEY_RIGHT},
+	{ 0x1414, KEY_DOWN},
+
+	{ 0x140f, KEY_EPG},
+	{ 0x1416, KEY_INFO},
+	{ 0x144d, KEY_BACKSPACE},
+
+	{ 0x141c, KEY_VOLUMEUP},
+	{ 0x141e, KEY_VOLUMEDOWN},
+
+	{ 0x144c, KEY_PLAY},
+	{ 0x141d, KEY_MUTE},
+
+	{ 0x141b, KEY_CHANNELUP},
+	{ 0x141f, KEY_CHANNELDOWN},
+
+	{ 0x1417, KEY_RED},
+	{ 0x1418, KEY_GREEN},
+	{ 0x1419, KEY_YELLOW},
+	{ 0x141a, KEY_BLUE},
+
+	{ 0x1458, KEY_RECORD},
+	{ 0x1448, KEY_STOP},
+	{ 0x1440, KEY_PAUSE},
+
+	{ 0x1454, KEY_LAST},
+	{ 0x144e, KEY_REWIND},
+	{ 0x144f, KEY_FASTFORWARD},
+	{ 0x145c, KEY_NEXT},
+};
+
+static struct rc_keymap nec_terratec_cinergy_xs_map = {
+	.map = {
+		.scan    = nec_terratec_cinergy_xs,
+		.size    = ARRAY_SIZE(nec_terratec_cinergy_xs),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+	}
+};
+
+static int __init init_rc_map_nec_terratec_cinergy_xs(void)
+{
+	return ir_register_map(&nec_terratec_cinergy_xs_map);
+}
+
+static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
+{
+	ir_unregister_map(&nec_terratec_cinergy_xs_map);
+}
+
+module_init(init_rc_map_nec_terratec_cinergy_xs)
+module_exit(exit_rc_map_nec_terratec_cinergy_xs)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
new file mode 100644
index 000000000000..e5849a6b3f05
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -0,0 +1,85 @@
+/* norwood.h - Keytable for norwood Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Norwood Micro (non-Pro) TV Tuner
+   By Peter Naulls <peter@chocky.org>
+   Key comments are the functions given in the manual */
+
+static struct ir_scancode norwood[] = {
+	/* Keys 0 to 9 */
+	{ 0x20, KEY_0 },
+	{ 0x21, KEY_1 },
+	{ 0x22, KEY_2 },
+	{ 0x23, KEY_3 },
+	{ 0x24, KEY_4 },
+	{ 0x25, KEY_5 },
+	{ 0x26, KEY_6 },
+	{ 0x27, KEY_7 },
+	{ 0x28, KEY_8 },
+	{ 0x29, KEY_9 },
+
+	{ 0x78, KEY_TUNER },		/* Video Source        */
+	{ 0x2c, KEY_EXIT },		/* Open/Close software */
+	{ 0x2a, KEY_SELECT },		/* 2 Digit Select      */
+	{ 0x69, KEY_AGAIN },		/* Recall              */
+
+	{ 0x32, KEY_BRIGHTNESSUP },	/* Brightness increase */
+	{ 0x33, KEY_BRIGHTNESSDOWN },	/* Brightness decrease */
+	{ 0x6b, KEY_KPPLUS },		/* (not named >>>>>)   */
+	{ 0x6c, KEY_KPMINUS },		/* (not named <<<<<)   */
+
+	{ 0x2d, KEY_MUTE },		/* Mute                */
+	{ 0x30, KEY_VOLUMEUP },		/* Volume up           */
+	{ 0x31, KEY_VOLUMEDOWN },	/* Volume down         */
+	{ 0x60, KEY_CHANNELUP },	/* Channel up          */
+	{ 0x61, KEY_CHANNELDOWN },	/* Channel down        */
+
+	{ 0x3f, KEY_RECORD },		/* Record              */
+	{ 0x37, KEY_PLAY },		/* Play                */
+	{ 0x36, KEY_PAUSE },		/* Pause               */
+	{ 0x2b, KEY_STOP },		/* Stop                */
+	{ 0x67, KEY_FASTFORWARD },	/* Foward              */
+	{ 0x66, KEY_REWIND },		/* Rewind              */
+	{ 0x3e, KEY_SEARCH },		/* Auto Scan           */
+	{ 0x2e, KEY_CAMERA },		/* Capture Video       */
+	{ 0x6d, KEY_MENU },		/* Show/Hide Control   */
+	{ 0x2f, KEY_ZOOM },		/* Full Screen         */
+	{ 0x34, KEY_RADIO },		/* FM                  */
+	{ 0x65, KEY_POWER },		/* Computer power      */
+};
+
+static struct rc_keymap norwood_map = {
+	.map = {
+		.scan    = norwood,
+		.size    = ARRAY_SIZE(norwood),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_NORWOOD,
+	}
+};
+
+static int __init init_rc_map_norwood(void)
+{
+	return ir_register_map(&norwood_map);
+}
+
+static void __exit exit_rc_map_norwood(void)
+{
+	ir_unregister_map(&norwood_map);
+}
+
+module_init(init_rc_map_norwood)
+module_exit(exit_rc_map_norwood)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
new file mode 100644
index 000000000000..b9ece1e90296
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -0,0 +1,80 @@
+/* npgtech.h - Keytable for npgtech Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode npgtech[] = {
+	{ 0x1d, KEY_SWITCHVIDEOMODE },	/* switch inputs */
+	{ 0x2a, KEY_FRONT },
+
+	{ 0x3e, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x06, KEY_3 },
+	{ 0x0a, KEY_4 },
+	{ 0x0e, KEY_5 },
+	{ 0x12, KEY_6 },
+	{ 0x16, KEY_7 },
+	{ 0x1a, KEY_8 },
+	{ 0x1e, KEY_9 },
+	{ 0x3a, KEY_0 },
+	{ 0x22, KEY_NUMLOCK },		/* -/-- */
+	{ 0x20, KEY_REFRESH },
+
+	{ 0x03, KEY_BRIGHTNESSDOWN },
+	{ 0x28, KEY_AUDIO },
+	{ 0x3c, KEY_CHANNELUP },
+	{ 0x3f, KEY_VOLUMEDOWN },
+	{ 0x2e, KEY_MUTE },
+	{ 0x3b, KEY_VOLUMEUP },
+	{ 0x00, KEY_CHANNELDOWN },
+	{ 0x07, KEY_BRIGHTNESSUP },
+	{ 0x2c, KEY_TEXT },
+
+	{ 0x37, KEY_RECORD },
+	{ 0x17, KEY_PLAY },
+	{ 0x13, KEY_PAUSE },
+	{ 0x26, KEY_STOP },
+	{ 0x18, KEY_FASTFORWARD },
+	{ 0x14, KEY_REWIND },
+	{ 0x33, KEY_ZOOM },
+	{ 0x32, KEY_KEYBOARD },
+	{ 0x30, KEY_GOTO },		/* Pointing arrow */
+	{ 0x36, KEY_MACRO },		/* Maximize/Minimize (yellow) */
+	{ 0x0b, KEY_RADIO },
+	{ 0x10, KEY_POWER },
+
+};
+
+static struct rc_keymap npgtech_map = {
+	.map = {
+		.scan    = npgtech,
+		.size    = ARRAY_SIZE(npgtech),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_NPGTECH,
+	}
+};
+
+static int __init init_rc_map_npgtech(void)
+{
+	return ir_register_map(&npgtech_map);
+}
+
+static void __exit exit_rc_map_npgtech(void)
+{
+	ir_unregister_map(&npgtech_map);
+}
+
+module_init(init_rc_map_npgtech)
+module_exit(exit_rc_map_npgtech)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
new file mode 100644
index 000000000000..4129bb44a25b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -0,0 +1,80 @@
+/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mapping for the 28 key remote control as seen at
+   http://www.sednacomputer.com/photo/cardbus-tv.jpg
+   Pavel Mihaylov <bin@bash.info>
+   Also for the remote bundled with Kozumi KTV-01C card */
+
+static struct ir_scancode pctv_sedna[] = {
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0a, KEY_AGAIN },	/* Recall */
+	{ 0x0b, KEY_CHANNELUP },
+	{ 0x0c, KEY_VOLUMEUP },
+	{ 0x0d, KEY_MODE },	/* Stereo */
+	{ 0x0e, KEY_STOP },
+	{ 0x0f, KEY_PREVIOUSSONG },
+	{ 0x10, KEY_ZOOM },
+	{ 0x11, KEY_TUNER },	/* Source */
+	{ 0x12, KEY_POWER },
+	{ 0x13, KEY_MUTE },
+	{ 0x15, KEY_CHANNELDOWN },
+	{ 0x18, KEY_VOLUMEDOWN },
+	{ 0x19, KEY_CAMERA },	/* Snapshot */
+	{ 0x1a, KEY_NEXTSONG },
+	{ 0x1b, KEY_TIME },	/* Time Shift */
+	{ 0x1c, KEY_RADIO },	/* FM Radio */
+	{ 0x1d, KEY_RECORD },
+	{ 0x1e, KEY_PAUSE },
+	/* additional codes for Kozumi's remote */
+	{ 0x14, KEY_INFO },	/* OSD */
+	{ 0x16, KEY_OK },	/* OK */
+	{ 0x17, KEY_DIGITS },	/* Plus */
+	{ 0x1f, KEY_PLAY },	/* Play */
+};
+
+static struct rc_keymap pctv_sedna_map = {
+	.map = {
+		.scan    = pctv_sedna,
+		.size    = ARRAY_SIZE(pctv_sedna),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PCTV_SEDNA,
+	}
+};
+
+static int __init init_rc_map_pctv_sedna(void)
+{
+	return ir_register_map(&pctv_sedna_map);
+}
+
+static void __exit exit_rc_map_pctv_sedna(void)
+{
+	ir_unregister_map(&pctv_sedna_map);
+}
+
+module_init(init_rc_map_pctv_sedna)
+module_exit(exit_rc_map_pctv_sedna)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
new file mode 100644
index 000000000000..326e023ce126
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -0,0 +1,94 @@
+/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pinnacle_color[] = {
+	{ 0x59, KEY_MUTE },
+	{ 0x4a, KEY_POWER },
+
+	{ 0x18, KEY_TEXT },
+	{ 0x26, KEY_TV },
+	{ 0x3d, KEY_PRINT },
+
+	{ 0x48, KEY_RED },
+	{ 0x04, KEY_GREEN },
+	{ 0x11, KEY_YELLOW },
+	{ 0x00, KEY_BLUE },
+
+	{ 0x2d, KEY_VOLUMEUP },
+	{ 0x1e, KEY_VOLUMEDOWN },
+
+	{ 0x49, KEY_MENU },
+
+	{ 0x16, KEY_CHANNELUP },
+	{ 0x17, KEY_CHANNELDOWN },
+
+	{ 0x20, KEY_UP },
+	{ 0x21, KEY_DOWN },
+	{ 0x22, KEY_LEFT },
+	{ 0x23, KEY_RIGHT },
+	{ 0x0d, KEY_SELECT },
+
+	{ 0x08, KEY_BACK },
+	{ 0x07, KEY_REFRESH },
+
+	{ 0x2f, KEY_ZOOM },
+	{ 0x29, KEY_RECORD },
+
+	{ 0x4b, KEY_PAUSE },
+	{ 0x4d, KEY_REWIND },
+	{ 0x2e, KEY_PLAY },
+	{ 0x4e, KEY_FORWARD },
+	{ 0x53, KEY_PREVIOUS },
+	{ 0x4c, KEY_STOP },
+	{ 0x54, KEY_NEXT },
+
+	{ 0x69, KEY_0 },
+	{ 0x6a, KEY_1 },
+	{ 0x6b, KEY_2 },
+	{ 0x6c, KEY_3 },
+	{ 0x6d, KEY_4 },
+	{ 0x6e, KEY_5 },
+	{ 0x6f, KEY_6 },
+	{ 0x70, KEY_7 },
+	{ 0x71, KEY_8 },
+	{ 0x72, KEY_9 },
+
+	{ 0x74, KEY_CHANNEL },
+	{ 0x0a, KEY_BACKSPACE },
+};
+
+static struct rc_keymap pinnacle_color_map = {
+	.map = {
+		.scan    = pinnacle_color,
+		.size    = ARRAY_SIZE(pinnacle_color),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PINNACLE_COLOR,
+	}
+};
+
+static int __init init_rc_map_pinnacle_color(void)
+{
+	return ir_register_map(&pinnacle_color_map);
+}
+
+static void __exit exit_rc_map_pinnacle_color(void)
+{
+	ir_unregister_map(&pinnacle_color_map);
+}
+
+module_init(init_rc_map_pinnacle_color)
+module_exit(exit_rc_map_pinnacle_color)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
new file mode 100644
index 000000000000..14cb772515c6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -0,0 +1,89 @@
+/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pinnacle_grey[] = {
+	{ 0x3a, KEY_0 },
+	{ 0x31, KEY_1 },
+	{ 0x32, KEY_2 },
+	{ 0x33, KEY_3 },
+	{ 0x34, KEY_4 },
+	{ 0x35, KEY_5 },
+	{ 0x36, KEY_6 },
+	{ 0x37, KEY_7 },
+	{ 0x38, KEY_8 },
+	{ 0x39, KEY_9 },
+
+	{ 0x2f, KEY_POWER },
+
+	{ 0x2e, KEY_P },
+	{ 0x1f, KEY_L },
+	{ 0x2b, KEY_I },
+
+	{ 0x2d, KEY_SCREEN },
+	{ 0x1e, KEY_ZOOM },
+	{ 0x1b, KEY_VOLUMEUP },
+	{ 0x0f, KEY_VOLUMEDOWN },
+	{ 0x17, KEY_CHANNELUP },
+	{ 0x1c, KEY_CHANNELDOWN },
+	{ 0x25, KEY_INFO },
+
+	{ 0x3c, KEY_MUTE },
+
+	{ 0x3d, KEY_LEFT },
+	{ 0x3b, KEY_RIGHT },
+
+	{ 0x3f, KEY_UP },
+	{ 0x3e, KEY_DOWN },
+	{ 0x1a, KEY_ENTER },
+
+	{ 0x1d, KEY_MENU },
+	{ 0x19, KEY_AGAIN },
+	{ 0x16, KEY_PREVIOUSSONG },
+	{ 0x13, KEY_NEXTSONG },
+	{ 0x15, KEY_PAUSE },
+	{ 0x0e, KEY_REWIND },
+	{ 0x0d, KEY_PLAY },
+	{ 0x0b, KEY_STOP },
+	{ 0x07, KEY_FORWARD },
+	{ 0x27, KEY_RECORD },
+	{ 0x26, KEY_TUNER },
+	{ 0x29, KEY_TEXT },
+	{ 0x2a, KEY_MEDIA },
+	{ 0x18, KEY_EPG },
+};
+
+static struct rc_keymap pinnacle_grey_map = {
+	.map = {
+		.scan    = pinnacle_grey,
+		.size    = ARRAY_SIZE(pinnacle_grey),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PINNACLE_GREY,
+	}
+};
+
+static int __init init_rc_map_pinnacle_grey(void)
+{
+	return ir_register_map(&pinnacle_grey_map);
+}
+
+static void __exit exit_rc_map_pinnacle_grey(void)
+{
+	ir_unregister_map(&pinnacle_grey_map);
+}
+
+module_init(init_rc_map_pinnacle_grey)
+module_exit(exit_rc_map_pinnacle_grey)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
new file mode 100644
index 000000000000..835bf4ef8de7
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -0,0 +1,73 @@
+/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Pinnacle PCTV HD 800i mini remote */
+
+static struct ir_scancode pinnacle_pctv_hd[] = {
+
+	{ 0x0f, KEY_1 },
+	{ 0x15, KEY_2 },
+	{ 0x10, KEY_3 },
+	{ 0x18, KEY_4 },
+	{ 0x1b, KEY_5 },
+	{ 0x1e, KEY_6 },
+	{ 0x11, KEY_7 },
+	{ 0x21, KEY_8 },
+	{ 0x12, KEY_9 },
+	{ 0x27, KEY_0 },
+
+	{ 0x24, KEY_ZOOM },
+	{ 0x2a, KEY_SUBTITLE },
+
+	{ 0x00, KEY_MUTE },
+	{ 0x01, KEY_ENTER },	/* Pinnacle Logo */
+	{ 0x39, KEY_POWER },
+
+	{ 0x03, KEY_VOLUMEUP },
+	{ 0x09, KEY_VOLUMEDOWN },
+	{ 0x06, KEY_CHANNELUP },
+	{ 0x0c, KEY_CHANNELDOWN },
+
+	{ 0x2d, KEY_REWIND },
+	{ 0x30, KEY_PLAYPAUSE },
+	{ 0x33, KEY_FASTFORWARD },
+	{ 0x3c, KEY_STOP },
+	{ 0x36, KEY_RECORD },
+	{ 0x3f, KEY_EPG },	/* Labeled "?" */
+};
+
+static struct rc_keymap pinnacle_pctv_hd_map = {
+	.map = {
+		.scan    = pinnacle_pctv_hd,
+		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PINNACLE_PCTV_HD,
+	}
+};
+
+static int __init init_rc_map_pinnacle_pctv_hd(void)
+{
+	return ir_register_map(&pinnacle_pctv_hd_map);
+}
+
+static void __exit exit_rc_map_pinnacle_pctv_hd(void)
+{
+	ir_unregister_map(&pinnacle_pctv_hd_map);
+}
+
+module_init(init_rc_map_pinnacle_pctv_hd)
+module_exit(exit_rc_map_pinnacle_pctv_hd)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
new file mode 100644
index 000000000000..5a735d569a8b
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -0,0 +1,83 @@
+/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Keytable for MK-F12 IR remote provided together with Pixelview
+ * Ultra Pro Remote Controller. Uses NEC extended format.
+ */
+static struct ir_scancode pixelview_mk12[] = {
+	{ 0x866b03, KEY_TUNER },	/* Timeshift */
+	{ 0x866b1e, KEY_POWER2 },	/* power */
+
+	{ 0x866b01, KEY_1 },
+	{ 0x866b0b, KEY_2 },
+	{ 0x866b1b, KEY_3 },
+	{ 0x866b05, KEY_4 },
+	{ 0x866b09, KEY_5 },
+	{ 0x866b15, KEY_6 },
+	{ 0x866b06, KEY_7 },
+	{ 0x866b0a, KEY_8 },
+	{ 0x866b12, KEY_9 },
+	{ 0x866b02, KEY_0 },
+
+	{ 0x866b13, KEY_AGAIN },	/* loop */
+	{ 0x866b10, KEY_DIGITS },	/* +100 */
+
+	{ 0x866b00, KEY_MEDIA },	/* source */
+	{ 0x866b18, KEY_MUTE },		/* mute */
+	{ 0x866b19, KEY_CAMERA },	/* snapshot */
+	{ 0x866b1a, KEY_SEARCH },	/* scan */
+
+	{ 0x866b16, KEY_CHANNELUP },	/* chn + */
+	{ 0x866b14, KEY_CHANNELDOWN },	/* chn - */
+	{ 0x866b1f, KEY_VOLUMEUP },	/* vol + */
+	{ 0x866b17, KEY_VOLUMEDOWN },	/* vol - */
+	{ 0x866b1c, KEY_ZOOM },		/* zoom */
+
+	{ 0x866b04, KEY_REWIND },
+	{ 0x866b0e, KEY_RECORD },
+	{ 0x866b0c, KEY_FORWARD },
+
+	{ 0x866b1d, KEY_STOP },
+	{ 0x866b08, KEY_PLAY },
+	{ 0x866b0f, KEY_PAUSE },
+
+	{ 0x866b0d, KEY_TV },
+	{ 0x866b07, KEY_RADIO },	/* FM */
+};
+
+static struct rc_keymap pixelview_map = {
+	.map = {
+		.scan    = pixelview_mk12,
+		.size    = ARRAY_SIZE(pixelview_mk12),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_PIXELVIEW_MK12,
+	}
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+	return ir_register_map(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+	ir_unregister_map(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
new file mode 100644
index 000000000000..7bbbbf5735e6
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -0,0 +1,83 @@
+/* pixelview-new.h - Keytable for pixelview_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+   present on PV MPEG 8000GT
+ */
+
+static struct ir_scancode pixelview_new[] = {
+	{ 0x3c, KEY_TIME },		/* Timeshift */
+	{ 0x12, KEY_POWER },
+
+	{ 0x3d, KEY_1 },
+	{ 0x38, KEY_2 },
+	{ 0x18, KEY_3 },
+	{ 0x35, KEY_4 },
+	{ 0x39, KEY_5 },
+	{ 0x15, KEY_6 },
+	{ 0x36, KEY_7 },
+	{ 0x3a, KEY_8 },
+	{ 0x1e, KEY_9 },
+	{ 0x3e, KEY_0 },
+
+	{ 0x1c, KEY_AGAIN },		/* LOOP	*/
+	{ 0x3f, KEY_MEDIA },		/* Source */
+	{ 0x1f, KEY_LAST },		/* +100 */
+	{ 0x1b, KEY_MUTE },
+
+	{ 0x17, KEY_CHANNELDOWN },
+	{ 0x16, KEY_CHANNELUP },
+	{ 0x10, KEY_VOLUMEUP },
+	{ 0x14, KEY_VOLUMEDOWN },
+	{ 0x13, KEY_ZOOM },
+
+	{ 0x19, KEY_CAMERA },		/* SNAPSHOT */
+	{ 0x1a, KEY_SEARCH },		/* scan */
+
+	{ 0x37, KEY_REWIND },		/* << */
+	{ 0x32, KEY_RECORD },		/* o (red) */
+	{ 0x33, KEY_FORWARD },		/* >> */
+	{ 0x11, KEY_STOP },		/* square */
+	{ 0x3b, KEY_PLAY },		/* > */
+	{ 0x30, KEY_PLAYPAUSE },	/* || */
+
+	{ 0x31, KEY_TV },
+	{ 0x34, KEY_RADIO },
+};
+
+static struct rc_keymap pixelview_new_map = {
+	.map = {
+		.scan    = pixelview_new,
+		.size    = ARRAY_SIZE(pixelview_new),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PIXELVIEW_NEW,
+	}
+};
+
+static int __init init_rc_map_pixelview_new(void)
+{
+	return ir_register_map(&pixelview_new_map);
+}
+
+static void __exit exit_rc_map_pixelview_new(void)
+{
+	ir_unregister_map(&pixelview_new_map);
+}
+
+module_init(init_rc_map_pixelview_new)
+module_exit(exit_rc_map_pixelview_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
new file mode 100644
index 000000000000..82ff12e182a0
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -0,0 +1,82 @@
+/* pixelview.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pixelview[] = {
+
+	{ 0x1e, KEY_POWER },	/* power */
+	{ 0x07, KEY_MEDIA },	/* source */
+	{ 0x1c, KEY_SEARCH },	/* scan */
+
+
+	{ 0x03, KEY_TUNER },		/* TV/FM */
+
+	{ 0x00, KEY_RECORD },
+	{ 0x08, KEY_STOP },
+	{ 0x11, KEY_PLAY },
+
+	{ 0x1a, KEY_PLAYPAUSE },	/* freeze */
+	{ 0x19, KEY_ZOOM },		/* zoom */
+	{ 0x0f, KEY_TEXT },		/* min */
+
+	{ 0x01, KEY_1 },
+	{ 0x0b, KEY_2 },
+	{ 0x1b, KEY_3 },
+	{ 0x05, KEY_4 },
+	{ 0x09, KEY_5 },
+	{ 0x15, KEY_6 },
+	{ 0x06, KEY_7 },
+	{ 0x0a, KEY_8 },
+	{ 0x12, KEY_9 },
+	{ 0x02, KEY_0 },
+	{ 0x10, KEY_LAST },		/* +100 */
+	{ 0x13, KEY_LIST },		/* recall */
+
+	{ 0x1f, KEY_CHANNELUP },	/* chn down */
+	{ 0x17, KEY_CHANNELDOWN },	/* chn up */
+	{ 0x16, KEY_VOLUMEUP },		/* vol down */
+	{ 0x14, KEY_VOLUMEDOWN },	/* vol up */
+
+	{ 0x04, KEY_KPMINUS },		/* <<< */
+	{ 0x0e, KEY_SETUP },		/* function */
+	{ 0x0c, KEY_KPPLUS },		/* >>> */
+
+	{ 0x0d, KEY_GOTO },		/* mts */
+	{ 0x1d, KEY_REFRESH },		/* reset */
+	{ 0x18, KEY_MUTE },		/* mute/unmute */
+};
+
+static struct rc_keymap pixelview_map = {
+	.map = {
+		.scan    = pixelview,
+		.size    = ARRAY_SIZE(pixelview),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PIXELVIEW,
+	}
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+	return ir_register_map(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+	ir_unregister_map(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
new file mode 100644
index 000000000000..7cef8190a224
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -0,0 +1,81 @@
+/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Remote control for Powercolor Real Angel 330
+ * Daniel Fraga <fragabr@gmail.com>
+ */
+
+static struct ir_scancode powercolor_real_angel[] = {
+	{ 0x38, KEY_SWITCHVIDEOMODE },	/* switch inputs */
+	{ 0x0c, KEY_MEDIA },		/* Turn ON/OFF App */
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+	{ 0x0a, KEY_DIGITS },		/* single, double, tripple digit */
+	{ 0x29, KEY_PREVIOUS },		/* previous channel */
+	{ 0x12, KEY_BRIGHTNESSUP },
+	{ 0x13, KEY_BRIGHTNESSDOWN },
+	{ 0x2b, KEY_MODE },		/* stereo/mono */
+	{ 0x2c, KEY_TEXT },		/* teletext */
+	{ 0x20, KEY_CHANNELUP },	/* channel up */
+	{ 0x21, KEY_CHANNELDOWN },	/* channel down */
+	{ 0x10, KEY_VOLUMEUP },		/* volume up */
+	{ 0x11, KEY_VOLUMEDOWN },	/* volume down */
+	{ 0x0d, KEY_MUTE },
+	{ 0x1f, KEY_RECORD },
+	{ 0x17, KEY_PLAY },
+	{ 0x16, KEY_PAUSE },
+	{ 0x0b, KEY_STOP },
+	{ 0x27, KEY_FASTFORWARD },
+	{ 0x26, KEY_REWIND },
+	{ 0x1e, KEY_SEARCH },		/* autoscan */
+	{ 0x0e, KEY_CAMERA },		/* snapshot */
+	{ 0x2d, KEY_SETUP },
+	{ 0x0f, KEY_SCREEN },		/* full screen */
+	{ 0x14, KEY_RADIO },		/* FM radio */
+	{ 0x25, KEY_POWER },		/* power */
+};
+
+static struct rc_keymap powercolor_real_angel_map = {
+	.map = {
+		.scan    = powercolor_real_angel,
+		.size    = ARRAY_SIZE(powercolor_real_angel),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_POWERCOLOR_REAL_ANGEL,
+	}
+};
+
+static int __init init_rc_map_powercolor_real_angel(void)
+{
+	return ir_register_map(&powercolor_real_angel_map);
+}
+
+static void __exit exit_rc_map_powercolor_real_angel(void)
+{
+	ir_unregister_map(&powercolor_real_angel_map);
+}
+
+module_init(init_rc_map_powercolor_real_angel)
+module_exit(exit_rc_map_powercolor_real_angel)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
new file mode 100644
index 000000000000..22e92d39dee5
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -0,0 +1,69 @@
+/* proteus-2309.h - Keytable for proteus_2309 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Michal Majchrowicz <mmajchrowicz@gmail.com> */
+
+static struct ir_scancode proteus_2309[] = {
+	/* numeric */
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x5c, KEY_POWER },		/* power       */
+	{ 0x20, KEY_ZOOM },		/* full screen */
+	{ 0x0f, KEY_BACKSPACE },	/* recall      */
+	{ 0x1b, KEY_ENTER },		/* mute        */
+	{ 0x41, KEY_RECORD },		/* record      */
+	{ 0x43, KEY_STOP },		/* stop        */
+	{ 0x16, KEY_S },
+	{ 0x1a, KEY_POWER2 },		/* off         */
+	{ 0x2e, KEY_RED },
+	{ 0x1f, KEY_CHANNELDOWN },	/* channel -   */
+	{ 0x1c, KEY_CHANNELUP },	/* channel +   */
+	{ 0x10, KEY_VOLUMEDOWN },	/* volume -    */
+	{ 0x1e, KEY_VOLUMEUP },		/* volume +    */
+	{ 0x14, KEY_F1 },
+};
+
+static struct rc_keymap proteus_2309_map = {
+	.map = {
+		.scan    = proteus_2309,
+		.size    = ARRAY_SIZE(proteus_2309),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PROTEUS_2309,
+	}
+};
+
+static int __init init_rc_map_proteus_2309(void)
+{
+	return ir_register_map(&proteus_2309_map);
+}
+
+static void __exit exit_rc_map_proteus_2309(void)
+{
+	ir_unregister_map(&proteus_2309_map);
+}
+
+module_init(init_rc_map_proteus_2309)
+module_exit(exit_rc_map_proteus_2309)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
new file mode 100644
index 000000000000..4e20fc2269f7
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -0,0 +1,81 @@
+/* purpletv.h - Keytable for purpletv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode purpletv[] = {
+	{ 0x03, KEY_POWER },
+	{ 0x6f, KEY_MUTE },
+	{ 0x10, KEY_BACKSPACE },	/* Recall */
+
+	{ 0x11, KEY_0 },
+	{ 0x04, KEY_1 },
+	{ 0x05, KEY_2 },
+	{ 0x06, KEY_3 },
+	{ 0x08, KEY_4 },
+	{ 0x09, KEY_5 },
+	{ 0x0a, KEY_6 },
+	{ 0x0c, KEY_7 },
+	{ 0x0d, KEY_8 },
+	{ 0x0e, KEY_9 },
+	{ 0x12, KEY_DOT },	/* 100+ */
+
+	{ 0x07, KEY_VOLUMEUP },
+	{ 0x0b, KEY_VOLUMEDOWN },
+	{ 0x1a, KEY_KPPLUS },
+	{ 0x18, KEY_KPMINUS },
+	{ 0x15, KEY_UP },
+	{ 0x1d, KEY_DOWN },
+	{ 0x0f, KEY_CHANNELUP },
+	{ 0x13, KEY_CHANNELDOWN },
+	{ 0x48, KEY_ZOOM },
+
+	{ 0x1b, KEY_VIDEO },	/* Video source */
+	{ 0x1f, KEY_CAMERA },	/* Snapshot */
+	{ 0x49, KEY_LANGUAGE },	/* MTS Select */
+	{ 0x19, KEY_SEARCH },	/* Auto Scan */
+
+	{ 0x4b, KEY_RECORD },
+	{ 0x46, KEY_PLAY },
+	{ 0x45, KEY_PAUSE },	/* Pause */
+	{ 0x44, KEY_STOP },
+	{ 0x43, KEY_TIME },	/* Time Shift */
+	{ 0x17, KEY_CHANNEL },	/* SURF CH */
+	{ 0x40, KEY_FORWARD },	/* Forward ? */
+	{ 0x42, KEY_REWIND },	/* Backward ? */
+
+};
+
+static struct rc_keymap purpletv_map = {
+	.map = {
+		.scan    = purpletv,
+		.size    = ARRAY_SIZE(purpletv),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PURPLETV,
+	}
+};
+
+static int __init init_rc_map_purpletv(void)
+{
+	return ir_register_map(&purpletv_map);
+}
+
+static void __exit exit_rc_map_purpletv(void)
+{
+	ir_unregister_map(&purpletv_map);
+}
+
+module_init(init_rc_map_purpletv)
+module_exit(exit_rc_map_purpletv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
new file mode 100644
index 000000000000..36679e706cf3
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -0,0 +1,78 @@
+/* pv951.h - Keytable for pv951 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mark Phalan <phalanm@o2.ie> */
+
+static struct ir_scancode pv951[] = {
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x12, KEY_POWER },
+	{ 0x10, KEY_MUTE },
+	{ 0x1f, KEY_VOLUMEDOWN },
+	{ 0x1b, KEY_VOLUMEUP },
+	{ 0x1a, KEY_CHANNELUP },
+	{ 0x1e, KEY_CHANNELDOWN },
+	{ 0x0e, KEY_PAGEUP },
+	{ 0x1d, KEY_PAGEDOWN },
+	{ 0x13, KEY_SOUND },
+
+	{ 0x18, KEY_KPPLUSMINUS },	/* CH +/- */
+	{ 0x16, KEY_SUBTITLE },		/* CC */
+	{ 0x0d, KEY_TEXT },		/* TTX */
+	{ 0x0b, KEY_TV },		/* AIR/CBL */
+	{ 0x11, KEY_PC },		/* PC/TV */
+	{ 0x17, KEY_OK },		/* CH RTN */
+	{ 0x19, KEY_MODE },		/* FUNC */
+	{ 0x0c, KEY_SEARCH },		/* AUTOSCAN */
+
+	/* Not sure what to do with these ones! */
+	{ 0x0f, KEY_SELECT },		/* SOURCE */
+	{ 0x0a, KEY_KPPLUS },		/* +100 */
+	{ 0x14, KEY_EQUAL },		/* SYNC */
+	{ 0x1c, KEY_MEDIA },		/* PC/TV */
+};
+
+static struct rc_keymap pv951_map = {
+	.map = {
+		.scan    = pv951,
+		.size    = ARRAY_SIZE(pv951),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_PV951,
+	}
+};
+
+static int __init init_rc_map_pv951(void)
+{
+	return ir_register_map(&pv951_map);
+}
+
+static void __exit exit_rc_map_pv951(void)
+{
+	ir_unregister_map(&pv951_map);
+}
+
+module_init(init_rc_map_pv951)
+module_exit(exit_rc_map_pv951)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
new file mode 100644
index 000000000000..cc6b8f548747
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -0,0 +1,103 @@
+/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Hauppauge:the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ *
+ * This table contains the complete RC5 code, instead of just the data part
+ */
+
+static struct ir_scancode rc5_hauppauge_new[] = {
+	/* Keys 0 to 9 */
+	{ 0x1e00, KEY_0 },
+	{ 0x1e01, KEY_1 },
+	{ 0x1e02, KEY_2 },
+	{ 0x1e03, KEY_3 },
+	{ 0x1e04, KEY_4 },
+	{ 0x1e05, KEY_5 },
+	{ 0x1e06, KEY_6 },
+	{ 0x1e07, KEY_7 },
+	{ 0x1e08, KEY_8 },
+	{ 0x1e09, KEY_9 },
+
+	{ 0x1e0a, KEY_TEXT },		/* keypad asterisk as well */
+	{ 0x1e0b, KEY_RED },		/* red button */
+	{ 0x1e0c, KEY_RADIO },
+	{ 0x1e0d, KEY_MENU },
+	{ 0x1e0e, KEY_SUBTITLE },		/* also the # key */
+	{ 0x1e0f, KEY_MUTE },
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+	{ 0x1e12, KEY_PREVIOUS },		/* previous channel */
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e18, KEY_VIDEO },		/* Videos */
+	{ 0x1e19, KEY_AUDIO },		/* Music */
+	/* 0x1e1a: Pictures - presume this means
+	   "Multimedia Home Platform" -
+	   no "PICTURES" key in input.h
+	 */
+	{ 0x1e1a, KEY_MHP },
+
+	{ 0x1e1b, KEY_EPG },		/* Guide */
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e1e, KEY_NEXTSONG },		/* skip >| */
+	{ 0x1e1f, KEY_EXIT },		/* back/exit */
+	{ 0x1e20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x1e21, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x1e22, KEY_CHANNEL },		/* source (old black remote) */
+	{ 0x1e24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x1e25, KEY_ENTER },		/* OK */
+	{ 0x1e26, KEY_SLEEP },		/* minimize (old black remote) */
+	{ 0x1e29, KEY_BLUE },		/* blue key */
+	{ 0x1e2e, KEY_GREEN },		/* green button */
+	{ 0x1e30, KEY_PAUSE },		/* pause */
+	{ 0x1e32, KEY_REWIND },		/* backward << */
+	{ 0x1e34, KEY_FASTFORWARD },	/* forward >> */
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e36, KEY_STOP },
+	{ 0x1e37, KEY_RECORD },		/* recording */
+	{ 0x1e38, KEY_YELLOW },		/* yellow key */
+	{ 0x1e3b, KEY_SELECT },		/* top right button */
+	{ 0x1e3c, KEY_ZOOM },		/* full */
+	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
+};
+
+static struct rc_keymap rc5_hauppauge_new_map = {
+	.map = {
+		.scan    = rc5_hauppauge_new,
+		.size    = ARRAY_SIZE(rc5_hauppauge_new),
+		.ir_type = IR_TYPE_RC5,
+		.name    = RC_MAP_RC5_HAUPPAUGE_NEW,
+	}
+};
+
+static int __init init_rc_map_rc5_hauppauge_new(void)
+{
+	return ir_register_map(&rc5_hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_rc5_hauppauge_new(void)
+{
+	ir_unregister_map(&rc5_hauppauge_new_map);
+}
+
+module_init(init_rc_map_rc5_hauppauge_new)
+module_exit(exit_rc_map_rc5_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
new file mode 100644
index 000000000000..73cce2f8ddfb
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-rc5-tv.c
@@ -0,0 +1,81 @@
+/* rc5-tv.h - Keytable for rc5_tv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* generic RC5 keytable                                          */
+/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
+/* used by old (black) Hauppauge remotes                         */
+
+static struct ir_scancode rc5_tv[] = {
+	/* Keys 0 to 9 */
+	{ 0x00, KEY_0 },
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+	{ 0x03, KEY_3 },
+	{ 0x04, KEY_4 },
+	{ 0x05, KEY_5 },
+	{ 0x06, KEY_6 },
+	{ 0x07, KEY_7 },
+	{ 0x08, KEY_8 },
+	{ 0x09, KEY_9 },
+
+	{ 0x0b, KEY_CHANNEL },		/* channel / program (japan: 11) */
+	{ 0x0c, KEY_POWER },		/* standby */
+	{ 0x0d, KEY_MUTE },		/* mute / demute */
+	{ 0x0f, KEY_TV },		/* display */
+	{ 0x10, KEY_VOLUMEUP },
+	{ 0x11, KEY_VOLUMEDOWN },
+	{ 0x12, KEY_BRIGHTNESSUP },
+	{ 0x13, KEY_BRIGHTNESSDOWN },
+	{ 0x1e, KEY_SEARCH },		/* search + */
+	{ 0x20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x21, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x22, KEY_CHANNEL },		/* alt / channel */
+	{ 0x23, KEY_LANGUAGE },		/* 1st / 2nd language */
+	{ 0x26, KEY_SLEEP },		/* sleeptimer */
+	{ 0x2e, KEY_MENU },		/* 2nd controls (USA: menu) */
+	{ 0x30, KEY_PAUSE },
+	{ 0x32, KEY_REWIND },
+	{ 0x33, KEY_GOTO },
+	{ 0x35, KEY_PLAY },
+	{ 0x36, KEY_STOP },
+	{ 0x37, KEY_RECORD },		/* recording */
+	{ 0x3c, KEY_TEXT },		/* teletext submode (Japan: 12) */
+	{ 0x3d, KEY_SUSPEND },		/* system standby */
+
+};
+
+static struct rc_keymap rc5_tv_map = {
+	.map = {
+		.scan    = rc5_tv,
+		.size    = ARRAY_SIZE(rc5_tv),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_RC5_TV,
+	}
+};
+
+static int __init init_rc_map_rc5_tv(void)
+{
+	return ir_register_map(&rc5_tv_map);
+}
+
+static void __exit exit_rc_map_rc5_tv(void)
+{
+	ir_unregister_map(&rc5_tv_map);
+}
+
+module_init(init_rc_map_rc5_tv)
+module_exit(exit_rc_map_rc5_tv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
new file mode 100644
index 000000000000..6da955dfef48
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -0,0 +1,113 @@
+/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use
+ * with the Media Center Edition eHome Infrared Transceiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc6_mce[] = {
+
+	{ 0x800f0400, KEY_NUMERIC_0 },
+	{ 0x800f0401, KEY_NUMERIC_1 },
+	{ 0x800f0402, KEY_NUMERIC_2 },
+	{ 0x800f0403, KEY_NUMERIC_3 },
+	{ 0x800f0404, KEY_NUMERIC_4 },
+	{ 0x800f0405, KEY_NUMERIC_5 },
+	{ 0x800f0406, KEY_NUMERIC_6 },
+	{ 0x800f0407, KEY_NUMERIC_7 },
+	{ 0x800f0408, KEY_NUMERIC_8 },
+	{ 0x800f0409, KEY_NUMERIC_9 },
+
+	{ 0x800f040a, KEY_DELETE },
+	{ 0x800f040b, KEY_ENTER },
+	{ 0x800f040c, KEY_POWER },		/* PC Power */
+	{ 0x800f040d, KEY_PROG1 },		/* Windows MCE button */
+	{ 0x800f040e, KEY_MUTE },
+	{ 0x800f040f, KEY_INFO },
+
+	{ 0x800f0410, KEY_VOLUMEUP },
+	{ 0x800f0411, KEY_VOLUMEDOWN },
+	{ 0x800f0412, KEY_CHANNELUP },
+	{ 0x800f0413, KEY_CHANNELDOWN },
+
+	{ 0x800f0414, KEY_FASTFORWARD },
+	{ 0x800f0415, KEY_REWIND },
+	{ 0x800f0416, KEY_PLAY },
+	{ 0x800f0417, KEY_RECORD },
+	{ 0x800f0418, KEY_PAUSE },
+	{ 0x800f046e, KEY_PLAYPAUSE },
+	{ 0x800f0419, KEY_STOP },
+	{ 0x800f041a, KEY_NEXT },
+	{ 0x800f041b, KEY_PREVIOUS },
+	{ 0x800f041c, KEY_NUMERIC_POUND },
+	{ 0x800f041d, KEY_NUMERIC_STAR },
+
+	{ 0x800f041e, KEY_UP },
+	{ 0x800f041f, KEY_DOWN },
+	{ 0x800f0420, KEY_LEFT },
+	{ 0x800f0421, KEY_RIGHT },
+
+	{ 0x800f0422, KEY_OK },
+	{ 0x800f0423, KEY_EXIT },
+	{ 0x800f0424, KEY_DVD },
+	{ 0x800f0425, KEY_TUNER },		/* LiveTV */
+	{ 0x800f0426, KEY_EPG },		/* Guide */
+	{ 0x800f0427, KEY_ZOOM },		/* Aspect */
+
+	{ 0x800f043a, KEY_BRIGHTNESSUP },
+
+	{ 0x800f0446, KEY_TV },
+	{ 0x800f0447, KEY_AUDIO },		/* My Music */
+	{ 0x800f0448, KEY_PVR },		/* RecordedTV */
+	{ 0x800f0449, KEY_CAMERA },
+	{ 0x800f044a, KEY_VIDEO },
+	{ 0x800f044c, KEY_LANGUAGE },
+	{ 0x800f044d, KEY_TITLE },
+	{ 0x800f044e, KEY_PRINT },	/* Print - HP OEM version of remote */
+
+	{ 0x800f0450, KEY_RADIO },
+
+	{ 0x800f045a, KEY_SUBTITLE },		/* Caption/Teletext */
+	{ 0x800f045b, KEY_RED },
+	{ 0x800f045c, KEY_GREEN },
+	{ 0x800f045d, KEY_YELLOW },
+	{ 0x800f045e, KEY_BLUE },
+
+	{ 0x800f0465, KEY_POWER2 },	/* TV Power */
+	{ 0x800f046e, KEY_PLAYPAUSE },
+	{ 0x800f046f, KEY_MEDIA },	/* Start media application (NEW) */
+
+	{ 0x800f0480, KEY_BRIGHTNESSDOWN },
+	{ 0x800f0481, KEY_PLAYPAUSE },
+};
+
+static struct rc_keymap rc6_mce_map = {
+	.map = {
+		.scan    = rc6_mce,
+		.size    = ARRAY_SIZE(rc6_mce),
+		.ir_type = IR_TYPE_RC6,
+		.name    = RC_MAP_RC6_MCE,
+	}
+};
+
+static int __init init_rc_map_rc6_mce(void)
+{
+	return ir_register_map(&rc6_mce_map);
+}
+
+static void __exit exit_rc_map_rc6_mce(void)
+{
+	ir_unregister_map(&rc6_mce_map);
+}
+
+module_init(init_rc_map_rc6_mce)
+module_exit(exit_rc_map_rc6_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
new file mode 100644
index 000000000000..ab1a6d2baf72
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -0,0 +1,78 @@
+/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Zogis Real Audio 220 - 32 keys IR */
+
+static struct ir_scancode real_audio_220_32_keys[] = {
+	{ 0x1c, KEY_RADIO},
+	{ 0x12, KEY_POWER2},
+
+	{ 0x01, KEY_1},
+	{ 0x02, KEY_2},
+	{ 0x03, KEY_3},
+	{ 0x04, KEY_4},
+	{ 0x05, KEY_5},
+	{ 0x06, KEY_6},
+	{ 0x07, KEY_7},
+	{ 0x08, KEY_8},
+	{ 0x09, KEY_9},
+	{ 0x00, KEY_0},
+
+	{ 0x0c, KEY_VOLUMEUP},
+	{ 0x18, KEY_VOLUMEDOWN},
+	{ 0x0b, KEY_CHANNELUP},
+	{ 0x15, KEY_CHANNELDOWN},
+	{ 0x16, KEY_ENTER},
+
+	{ 0x11, KEY_LIST},		/* Source */
+	{ 0x0d, KEY_AUDIO},		/* stereo */
+
+	{ 0x0f, KEY_PREVIOUS},		/* Prev */
+	{ 0x1b, KEY_TIME},		/* Timeshift */
+	{ 0x1a, KEY_NEXT},		/* Next */
+
+	{ 0x0e, KEY_STOP},
+	{ 0x1f, KEY_PLAY},
+	{ 0x1e, KEY_PLAYPAUSE},		/* Pause */
+
+	{ 0x1d, KEY_RECORD},
+	{ 0x13, KEY_MUTE},
+	{ 0x19, KEY_CAMERA},		/* Snapshot */
+
+};
+
+static struct rc_keymap real_audio_220_32_keys_map = {
+	.map = {
+		.scan    = real_audio_220_32_keys,
+		.size    = ARRAY_SIZE(real_audio_220_32_keys),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_REAL_AUDIO_220_32_KEYS,
+	}
+};
+
+static int __init init_rc_map_real_audio_220_32_keys(void)
+{
+	return ir_register_map(&real_audio_220_32_keys_map);
+}
+
+static void __exit exit_rc_map_real_audio_220_32_keys(void)
+{
+	ir_unregister_map(&real_audio_220_32_keys_map);
+}
+
+module_init(init_rc_map_real_audio_220_32_keys)
+module_exit(exit_rc_map_real_audio_220_32_keys)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
new file mode 100644
index 000000000000..df32013a321c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -0,0 +1,82 @@
+/* rc-streamzap.c - Keytable for Streamzap PC Remote, for use
+ * with the Streamzap PC Remote IR Receiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode streamzap[] = {
+/*
+ * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
+ * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
+ * an additional RC-5-sz decoder is being deployed to support it, but it
+ * may be possible to merge it back with the standard RC-5 decoder.
+ */
+	{ 0x28c0, KEY_NUMERIC_0 },
+	{ 0x28c1, KEY_NUMERIC_1 },
+	{ 0x28c2, KEY_NUMERIC_2 },
+	{ 0x28c3, KEY_NUMERIC_3 },
+	{ 0x28c4, KEY_NUMERIC_4 },
+	{ 0x28c5, KEY_NUMERIC_5 },
+	{ 0x28c6, KEY_NUMERIC_6 },
+	{ 0x28c7, KEY_NUMERIC_7 },
+	{ 0x28c8, KEY_NUMERIC_8 },
+	{ 0x28c9, KEY_NUMERIC_9 },
+	{ 0x28ca, KEY_POWER },
+	{ 0x28cb, KEY_MUTE },
+	{ 0x28cc, KEY_CHANNELUP },
+	{ 0x28cd, KEY_VOLUMEUP },
+	{ 0x28ce, KEY_CHANNELDOWN },
+	{ 0x28cf, KEY_VOLUMEDOWN },
+	{ 0x28d0, KEY_UP },
+	{ 0x28d1, KEY_LEFT },
+	{ 0x28d2, KEY_OK },
+	{ 0x28d3, KEY_RIGHT },
+	{ 0x28d4, KEY_DOWN },
+	{ 0x28d5, KEY_MENU },
+	{ 0x28d6, KEY_EXIT },
+	{ 0x28d7, KEY_PLAY },
+	{ 0x28d8, KEY_PAUSE },
+	{ 0x28d9, KEY_STOP },
+	{ 0x28da, KEY_BACK },
+	{ 0x28db, KEY_FORWARD },
+	{ 0x28dc, KEY_RECORD },
+	{ 0x28dd, KEY_REWIND },
+	{ 0x28de, KEY_FASTFORWARD },
+	{ 0x28e0, KEY_RED },
+	{ 0x28e1, KEY_GREEN },
+	{ 0x28e2, KEY_YELLOW },
+	{ 0x28e3, KEY_BLUE },
+
+};
+
+static struct rc_keymap streamzap_map = {
+	.map = {
+		.scan    = streamzap,
+		.size    = ARRAY_SIZE(streamzap),
+		.ir_type = IR_TYPE_RC5_SZ,
+		.name    = RC_MAP_STREAMZAP,
+	}
+};
+
+static int __init init_rc_map_streamzap(void)
+{
+	return ir_register_map(&streamzap_map);
+}
+
+static void __exit exit_rc_map_streamzap(void)
+{
+	ir_unregister_map(&streamzap_map);
+}
+
+module_init(init_rc_map_streamzap)
+module_exit(exit_rc_map_streamzap)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
new file mode 100644
index 000000000000..3309631e6f80
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -0,0 +1,73 @@
+/* tbs-nec.h - Keytable for tbs_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode tbs_nec[] = {
+	{ 0x04, KEY_POWER2},	/*power*/
+	{ 0x14, KEY_MUTE},	/*mute*/
+	{ 0x07, KEY_1},
+	{ 0x06, KEY_2},
+	{ 0x05, KEY_3},
+	{ 0x0b, KEY_4},
+	{ 0x0a, KEY_5},
+	{ 0x09, KEY_6},
+	{ 0x0f, KEY_7},
+	{ 0x0e, KEY_8},
+	{ 0x0d, KEY_9},
+	{ 0x12, KEY_0},
+	{ 0x16, KEY_CHANNELUP},	/*ch+*/
+	{ 0x11, KEY_CHANNELDOWN},/*ch-*/
+	{ 0x13, KEY_VOLUMEUP},	/*vol+*/
+	{ 0x0c, KEY_VOLUMEDOWN},/*vol-*/
+	{ 0x03, KEY_RECORD},	/*rec*/
+	{ 0x18, KEY_PAUSE},	/*pause*/
+	{ 0x19, KEY_OK},	/*ok*/
+	{ 0x1a, KEY_CAMERA},	/* snapshot */
+	{ 0x01, KEY_UP},
+	{ 0x10, KEY_LEFT},
+	{ 0x02, KEY_RIGHT},
+	{ 0x08, KEY_DOWN},
+	{ 0x15, KEY_FAVORITES},
+	{ 0x17, KEY_SUBTITLE},
+	{ 0x1d, KEY_ZOOM},
+	{ 0x1f, KEY_EXIT},
+	{ 0x1e, KEY_MENU},
+	{ 0x1c, KEY_EPG},
+	{ 0x00, KEY_PREVIOUS},
+	{ 0x1b, KEY_MODE},
+};
+
+static struct rc_keymap tbs_nec_map = {
+	.map = {
+		.scan    = tbs_nec,
+		.size    = ARRAY_SIZE(tbs_nec),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TBS_NEC,
+	}
+};
+
+static int __init init_rc_map_tbs_nec(void)
+{
+	return ir_register_map(&tbs_nec_map);
+}
+
+static void __exit exit_rc_map_tbs_nec(void)
+{
+	ir_unregister_map(&tbs_nec_map);
+}
+
+module_init(init_rc_map_tbs_nec)
+module_exit(exit_rc_map_tbs_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
new file mode 100644
index 000000000000..5326a0b444c1
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -0,0 +1,92 @@
+/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Terratec Cinergy Hybrid T USB XS
+   Devin Heitmueller <dheitmueller@linuxtv.org>
+ */
+
+static struct ir_scancode terratec_cinergy_xs[] = {
+	{ 0x41, KEY_HOME},
+	{ 0x01, KEY_POWER},
+	{ 0x42, KEY_MENU},
+	{ 0x02, KEY_1},
+	{ 0x03, KEY_2},
+	{ 0x04, KEY_3},
+	{ 0x43, KEY_SUBTITLE},
+	{ 0x05, KEY_4},
+	{ 0x06, KEY_5},
+	{ 0x07, KEY_6},
+	{ 0x44, KEY_TEXT},
+	{ 0x08, KEY_7},
+	{ 0x09, KEY_8},
+	{ 0x0a, KEY_9},
+	{ 0x45, KEY_DELETE},
+	{ 0x0b, KEY_TUNER},
+	{ 0x0c, KEY_0},
+	{ 0x0d, KEY_MODE},
+	{ 0x46, KEY_TV},
+	{ 0x47, KEY_DVD},
+	{ 0x49, KEY_VIDEO},
+	{ 0x4b, KEY_AUX},
+	{ 0x10, KEY_UP},
+	{ 0x11, KEY_LEFT},
+	{ 0x12, KEY_OK},
+	{ 0x13, KEY_RIGHT},
+	{ 0x14, KEY_DOWN},
+	{ 0x0f, KEY_EPG},
+	{ 0x16, KEY_INFO},
+	{ 0x4d, KEY_BACKSPACE},
+	{ 0x1c, KEY_VOLUMEUP},
+	{ 0x4c, KEY_PLAY},
+	{ 0x1b, KEY_CHANNELUP},
+	{ 0x1e, KEY_VOLUMEDOWN},
+	{ 0x1d, KEY_MUTE},
+	{ 0x1f, KEY_CHANNELDOWN},
+	{ 0x17, KEY_RED},
+	{ 0x18, KEY_GREEN},
+	{ 0x19, KEY_YELLOW},
+	{ 0x1a, KEY_BLUE},
+	{ 0x58, KEY_RECORD},
+	{ 0x48, KEY_STOP},
+	{ 0x40, KEY_PAUSE},
+	{ 0x54, KEY_LAST},
+	{ 0x4e, KEY_REWIND},
+	{ 0x4f, KEY_FASTFORWARD},
+	{ 0x5c, KEY_NEXT},
+};
+
+static struct rc_keymap terratec_cinergy_xs_map = {
+	.map = {
+		.scan    = terratec_cinergy_xs,
+		.size    = ARRAY_SIZE(terratec_cinergy_xs),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TERRATEC_CINERGY_XS,
+	}
+};
+
+static int __init init_rc_map_terratec_cinergy_xs(void)
+{
+	return ir_register_map(&terratec_cinergy_xs_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_xs(void)
+{
+	ir_unregister_map(&terratec_cinergy_xs_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_xs)
+module_exit(exit_rc_map_terratec_cinergy_xs)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
new file mode 100644
index 000000000000..10dee4c1deff
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -0,0 +1,79 @@
+/*
+ * TerraTec remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* TerraTec slim remote, 7 rows, 4 columns. */
+/* Uses NEC extended 0x02bd. */
+static struct ir_scancode terratec_slim[] = {
+	{ 0x02bd00, KEY_1 },
+	{ 0x02bd01, KEY_2 },
+	{ 0x02bd02, KEY_3 },
+	{ 0x02bd03, KEY_4 },
+	{ 0x02bd04, KEY_5 },
+	{ 0x02bd05, KEY_6 },
+	{ 0x02bd06, KEY_7 },
+	{ 0x02bd07, KEY_8 },
+	{ 0x02bd08, KEY_9 },
+	{ 0x02bd09, KEY_0 },
+	{ 0x02bd0a, KEY_MUTE },
+	{ 0x02bd0b, KEY_NEW },             /* symbol: PIP */
+	{ 0x02bd0e, KEY_VOLUMEDOWN },
+	{ 0x02bd0f, KEY_PLAYPAUSE },
+	{ 0x02bd10, KEY_RIGHT },
+	{ 0x02bd11, KEY_LEFT },
+	{ 0x02bd12, KEY_UP },
+	{ 0x02bd13, KEY_DOWN },
+	{ 0x02bd15, KEY_OK },
+	{ 0x02bd16, KEY_STOP },
+	{ 0x02bd17, KEY_CAMERA },          /* snapshot */
+	{ 0x02bd18, KEY_CHANNELUP },
+	{ 0x02bd19, KEY_RECORD },
+	{ 0x02bd1a, KEY_CHANNELDOWN },
+	{ 0x02bd1c, KEY_ESC },
+	{ 0x02bd1f, KEY_VOLUMEUP },
+	{ 0x02bd44, KEY_EPG },
+	{ 0x02bd45, KEY_POWER2 },          /* [red power button] */
+};
+
+static struct rc_keymap terratec_slim_map = {
+	.map = {
+		.scan    = terratec_slim,
+		.size    = ARRAY_SIZE(terratec_slim),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_TERRATEC_SLIM,
+	}
+};
+
+static int __init init_rc_map_terratec_slim(void)
+{
+	return ir_register_map(&terratec_slim_map);
+}
+
+static void __exit exit_rc_map_terratec_slim(void)
+{
+	ir_unregister_map(&terratec_slim_map);
+}
+
+module_init(init_rc_map_terratec_slim)
+module_exit(exit_rc_map_terratec_slim)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
new file mode 100644
index 000000000000..e30d411c07bb
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -0,0 +1,88 @@
+/* tevii-nec.h - Keytable for tevii_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode tevii_nec[] = {
+	{ 0x0a, KEY_POWER2},
+	{ 0x0c, KEY_MUTE},
+	{ 0x11, KEY_1},
+	{ 0x12, KEY_2},
+	{ 0x13, KEY_3},
+	{ 0x14, KEY_4},
+	{ 0x15, KEY_5},
+	{ 0x16, KEY_6},
+	{ 0x17, KEY_7},
+	{ 0x18, KEY_8},
+	{ 0x19, KEY_9},
+	{ 0x10, KEY_0},
+	{ 0x1c, KEY_MENU},
+	{ 0x0f, KEY_VOLUMEDOWN},
+	{ 0x1a, KEY_LAST},
+	{ 0x0e, KEY_OPEN},
+	{ 0x04, KEY_RECORD},
+	{ 0x09, KEY_VOLUMEUP},
+	{ 0x08, KEY_CHANNELUP},
+	{ 0x07, KEY_PVR},
+	{ 0x0b, KEY_TIME},
+	{ 0x02, KEY_RIGHT},
+	{ 0x03, KEY_LEFT},
+	{ 0x00, KEY_UP},
+	{ 0x1f, KEY_OK},
+	{ 0x01, KEY_DOWN},
+	{ 0x05, KEY_TUNER},
+	{ 0x06, KEY_CHANNELDOWN},
+	{ 0x40, KEY_PLAYPAUSE},
+	{ 0x1e, KEY_REWIND},
+	{ 0x1b, KEY_FAVORITES},
+	{ 0x1d, KEY_BACK},
+	{ 0x4d, KEY_FASTFORWARD},
+	{ 0x44, KEY_EPG},
+	{ 0x4c, KEY_INFO},
+	{ 0x41, KEY_AB},
+	{ 0x43, KEY_AUDIO},
+	{ 0x45, KEY_SUBTITLE},
+	{ 0x4a, KEY_LIST},
+	{ 0x46, KEY_F1},
+	{ 0x47, KEY_F2},
+	{ 0x5e, KEY_F3},
+	{ 0x5c, KEY_F4},
+	{ 0x52, KEY_F5},
+	{ 0x5a, KEY_F6},
+	{ 0x56, KEY_MODE},
+	{ 0x58, KEY_SWITCHVIDEOMODE},
+};
+
+static struct rc_keymap tevii_nec_map = {
+	.map = {
+		.scan    = tevii_nec,
+		.size    = ARRAY_SIZE(tevii_nec),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TEVII_NEC,
+	}
+};
+
+static int __init init_rc_map_tevii_nec(void)
+{
+	return ir_register_map(&tevii_nec_map);
+}
+
+static void __exit exit_rc_map_tevii_nec(void)
+{
+	ir_unregister_map(&tevii_nec_map);
+}
+
+module_init(init_rc_map_tevii_nec)
+module_exit(exit_rc_map_tevii_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
new file mode 100644
index 000000000000..fd1985763781
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -0,0 +1,85 @@
+/*
+ * Total Media In Hand remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Uses NEC extended 0x02bd */
+static struct ir_scancode total_media_in_hand[] = {
+	{ 0x02bd00, KEY_1 },
+	{ 0x02bd01, KEY_2 },
+	{ 0x02bd02, KEY_3 },
+	{ 0x02bd03, KEY_4 },
+	{ 0x02bd04, KEY_5 },
+	{ 0x02bd05, KEY_6 },
+	{ 0x02bd06, KEY_7 },
+	{ 0x02bd07, KEY_8 },
+	{ 0x02bd08, KEY_9 },
+	{ 0x02bd09, KEY_0 },
+	{ 0x02bd0a, KEY_MUTE },
+	{ 0x02bd0b, KEY_CYCLEWINDOWS },    /* yellow, [min / max] */
+	{ 0x02bd0c, KEY_VIDEO },           /* TV / AV */
+	{ 0x02bd0e, KEY_VOLUMEDOWN },
+	{ 0x02bd0f, KEY_TIME },            /* TimeShift */
+	{ 0x02bd10, KEY_RIGHT },           /* right arrow */
+	{ 0x02bd11, KEY_LEFT },            /* left arrow */
+	{ 0x02bd12, KEY_UP },              /* up arrow */
+	{ 0x02bd13, KEY_DOWN },            /* down arrow */
+	{ 0x02bd14, KEY_POWER2 },          /* [red] */
+	{ 0x02bd15, KEY_OK },              /* OK */
+	{ 0x02bd16, KEY_STOP },
+	{ 0x02bd17, KEY_CAMERA },          /* Snapshot */
+	{ 0x02bd18, KEY_CHANNELUP },
+	{ 0x02bd19, KEY_RECORD },
+	{ 0x02bd1a, KEY_CHANNELDOWN },
+	{ 0x02bd1c, KEY_ESC },             /* Esc */
+	{ 0x02bd1e, KEY_PLAY },
+	{ 0x02bd1f, KEY_VOLUMEUP },
+	{ 0x02bd40, KEY_PAUSE },
+	{ 0x02bd41, KEY_FASTFORWARD },     /* FF >> */
+	{ 0x02bd42, KEY_REWIND },          /* FR << */
+	{ 0x02bd43, KEY_ZOOM },            /* [window + mouse pointer] */
+	{ 0x02bd44, KEY_SHUFFLE },         /* Shuffle */
+	{ 0x02bd45, KEY_INFO },            /* [red (I)] */
+};
+
+static struct rc_keymap total_media_in_hand_map = {
+	.map = {
+		.scan    = total_media_in_hand,
+		.size    = ARRAY_SIZE(total_media_in_hand),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_TOTAL_MEDIA_IN_HAND,
+	}
+};
+
+static int __init init_rc_map_total_media_in_hand(void)
+{
+	return ir_register_map(&total_media_in_hand_map);
+}
+
+static void __exit exit_rc_map_total_media_in_hand(void)
+{
+	ir_unregister_map(&total_media_in_hand_map);
+}
+
+module_init(init_rc_map_total_media_in_hand)
+module_exit(exit_rc_map_total_media_in_hand)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
new file mode 100644
index 000000000000..91092caca452
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -0,0 +1,80 @@
+/*
+ * TrekStor remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* TrekStor DVB-T USB Stick remote controller. */
+/* Imported from af9015.h.
+   Initial keytable was from Marc Schneider <macke@macke.org> */
+static struct ir_scancode trekstor[] = {
+	{ 0x0084, KEY_0 },
+	{ 0x0085, KEY_MUTE },            /* Mute */
+	{ 0x0086, KEY_HOMEPAGE },        /* Home */
+	{ 0x0087, KEY_UP },              /* Up */
+	{ 0x0088, KEY_OK },              /* OK */
+	{ 0x0089, KEY_RIGHT },           /* Right */
+	{ 0x008a, KEY_FASTFORWARD },     /* Fast forward */
+	{ 0x008b, KEY_VOLUMEUP },        /* Volume + */
+	{ 0x008c, KEY_DOWN },            /* Down */
+	{ 0x008d, KEY_PLAY },            /* Play/Pause */
+	{ 0x008e, KEY_STOP },            /* Stop */
+	{ 0x008f, KEY_EPG },             /* Info/EPG */
+	{ 0x0090, KEY_7 },
+	{ 0x0091, KEY_4 },
+	{ 0x0092, KEY_1 },
+	{ 0x0093, KEY_CHANNELDOWN },     /* Channel - */
+	{ 0x0094, KEY_8 },
+	{ 0x0095, KEY_5 },
+	{ 0x0096, KEY_2 },
+	{ 0x0097, KEY_CHANNELUP },       /* Channel + */
+	{ 0x0098, KEY_9 },
+	{ 0x0099, KEY_6 },
+	{ 0x009a, KEY_3 },
+	{ 0x009b, KEY_VOLUMEDOWN },      /* Volume - */
+	{ 0x009c, KEY_TV },              /* TV */
+	{ 0x009d, KEY_RECORD },          /* Record */
+	{ 0x009e, KEY_REWIND },          /* Rewind */
+	{ 0x009f, KEY_LEFT },            /* Left */
+};
+
+static struct rc_keymap trekstor_map = {
+	.map = {
+		.scan    = trekstor,
+		.size    = ARRAY_SIZE(trekstor),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_TREKSTOR,
+	}
+};
+
+static int __init init_rc_map_trekstor(void)
+{
+	return ir_register_map(&trekstor_map);
+}
+
+static void __exit exit_rc_map_trekstor(void)
+{
+	ir_unregister_map(&trekstor_map);
+}
+
+module_init(init_rc_map_trekstor)
+module_exit(exit_rc_map_trekstor)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
new file mode 100644
index 000000000000..bc88de011d5d
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -0,0 +1,82 @@
+/* tt-1500.h - Keytable for tt_1500 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* for the Technotrend 1500 bundled remotes (grey and black): */
+
+static struct ir_scancode tt_1500[] = {
+	{ 0x01, KEY_POWER },
+	{ 0x02, KEY_SHUFFLE },		/* ? double-arrow key */
+	{ 0x03, KEY_1 },
+	{ 0x04, KEY_2 },
+	{ 0x05, KEY_3 },
+	{ 0x06, KEY_4 },
+	{ 0x07, KEY_5 },
+	{ 0x08, KEY_6 },
+	{ 0x09, KEY_7 },
+	{ 0x0a, KEY_8 },
+	{ 0x0b, KEY_9 },
+	{ 0x0c, KEY_0 },
+	{ 0x0d, KEY_UP },
+	{ 0x0e, KEY_LEFT },
+	{ 0x0f, KEY_OK },
+	{ 0x10, KEY_RIGHT },
+	{ 0x11, KEY_DOWN },
+	{ 0x12, KEY_INFO },
+	{ 0x13, KEY_EXIT },
+	{ 0x14, KEY_RED },
+	{ 0x15, KEY_GREEN },
+	{ 0x16, KEY_YELLOW },
+	{ 0x17, KEY_BLUE },
+	{ 0x18, KEY_MUTE },
+	{ 0x19, KEY_TEXT },
+	{ 0x1a, KEY_MODE },		/* ? TV/Radio */
+	{ 0x21, KEY_OPTION },
+	{ 0x22, KEY_EPG },
+	{ 0x23, KEY_CHANNELUP },
+	{ 0x24, KEY_CHANNELDOWN },
+	{ 0x25, KEY_VOLUMEUP },
+	{ 0x26, KEY_VOLUMEDOWN },
+	{ 0x27, KEY_SETUP },
+	{ 0x3a, KEY_RECORD },		/* these keys are only in the black remote */
+	{ 0x3b, KEY_PLAY },
+	{ 0x3c, KEY_STOP },
+	{ 0x3d, KEY_REWIND },
+	{ 0x3e, KEY_PAUSE },
+	{ 0x3f, KEY_FORWARD },
+};
+
+static struct rc_keymap tt_1500_map = {
+	.map = {
+		.scan    = tt_1500,
+		.size    = ARRAY_SIZE(tt_1500),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TT_1500,
+	}
+};
+
+static int __init init_rc_map_tt_1500(void)
+{
+	return ir_register_map(&tt_1500_map);
+}
+
+static void __exit exit_rc_map_tt_1500(void)
+{
+	ir_unregister_map(&tt_1500_map);
+}
+
+module_init(init_rc_map_tt_1500)
+module_exit(exit_rc_map_tt_1500)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
new file mode 100644
index 000000000000..0b5d356c2d84
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -0,0 +1,87 @@
+#include <media/rc-map.h>
+
+static struct ir_scancode twinhan_vp1027[] = {
+	{ 0x16, KEY_POWER2 },
+	{ 0x17, KEY_FAVORITES },
+	{ 0x0f, KEY_TEXT },
+	{ 0x48, KEY_INFO},
+	{ 0x1c, KEY_EPG },
+	{ 0x04, KEY_LIST },
+
+	{ 0x03, KEY_1 },
+	{ 0x01, KEY_2 },
+	{ 0x06, KEY_3 },
+	{ 0x09, KEY_4 },
+	{ 0x1d, KEY_5 },
+	{ 0x1f, KEY_6 },
+	{ 0x0d, KEY_7 },
+	{ 0x19, KEY_8 },
+	{ 0x1b, KEY_9 },
+	{ 0x15, KEY_0 },
+
+	{ 0x0c, KEY_CANCEL },
+	{ 0x4a, KEY_CLEAR },
+	{ 0x13, KEY_BACKSPACE },
+	{ 0x00, KEY_TAB },
+
+	{ 0x4b, KEY_UP },
+	{ 0x51, KEY_DOWN },
+	{ 0x4e, KEY_LEFT },
+	{ 0x52, KEY_RIGHT },
+	{ 0x4f, KEY_ENTER },
+
+	{ 0x1e, KEY_VOLUMEUP },
+	{ 0x0a, KEY_VOLUMEDOWN },
+	{ 0x02, KEY_CHANNELDOWN },
+	{ 0x05, KEY_CHANNELUP },
+	{ 0x11, KEY_RECORD },
+
+	{ 0x14, KEY_PLAY },
+	{ 0x4c, KEY_PAUSE },
+	{ 0x1a, KEY_STOP },
+	{ 0x40, KEY_REWIND },
+	{ 0x12, KEY_FASTFORWARD },
+	{ 0x41, KEY_PREVIOUSSONG },
+	{ 0x42, KEY_NEXTSONG },
+	{ 0x54, KEY_SAVE },
+	{ 0x50, KEY_LANGUAGE },
+	{ 0x47, KEY_MEDIA },
+	{ 0x4d, KEY_SCREEN },
+	{ 0x43, KEY_SUBTITLE },
+	{ 0x10, KEY_MUTE },
+	{ 0x49, KEY_AUDIO },
+	{ 0x07, KEY_SLEEP },
+	{ 0x08, KEY_VIDEO },
+	{ 0x0e, KEY_AGAIN },
+	{ 0x45, KEY_EQUAL },
+	{ 0x46, KEY_MINUS },
+	{ 0x18, KEY_RED },
+	{ 0x53, KEY_GREEN },
+	{ 0x5e, KEY_YELLOW },
+	{ 0x5f, KEY_BLUE },
+};
+
+static struct rc_keymap twinhan_vp1027_map = {
+	.map = {
+		.scan    = twinhan_vp1027,
+		.size    = ARRAY_SIZE(twinhan_vp1027),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TWINHAN_VP1027_DVBS,
+	}
+};
+
+static int __init init_rc_map_twinhan_vp1027(void)
+{
+	return ir_register_map(&twinhan_vp1027_map);
+}
+
+static void __exit exit_rc_map_twinhan_vp1027(void)
+{
+	ir_unregister_map(&twinhan_vp1027_map);
+}
+
+module_init(init_rc_map_twinhan_vp1027)
+module_exit(exit_rc_map_twinhan_vp1027)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sergey Ivanov <123kash@gmail.com>");
diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
new file mode 100644
index 000000000000..4df7fcd1d2fc
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -0,0 +1,85 @@
+/* videomate-s350.h - Keytable for videomate_s350 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode videomate_s350[] = {
+	{ 0x00, KEY_TV},
+	{ 0x01, KEY_DVD},
+	{ 0x04, KEY_RECORD},
+	{ 0x05, KEY_VIDEO},	/* TV/Video */
+	{ 0x07, KEY_STOP},
+	{ 0x08, KEY_PLAYPAUSE},
+	{ 0x0a, KEY_REWIND},
+	{ 0x0f, KEY_FASTFORWARD},
+	{ 0x10, KEY_CHANNELUP},
+	{ 0x12, KEY_VOLUMEUP},
+	{ 0x13, KEY_CHANNELDOWN},
+	{ 0x14, KEY_MUTE},
+	{ 0x15, KEY_VOLUMEDOWN},
+	{ 0x16, KEY_1},
+	{ 0x17, KEY_2},
+	{ 0x18, KEY_3},
+	{ 0x19, KEY_4},
+	{ 0x1a, KEY_5},
+	{ 0x1b, KEY_6},
+	{ 0x1c, KEY_7},
+	{ 0x1d, KEY_8},
+	{ 0x1e, KEY_9},
+	{ 0x1f, KEY_0},
+	{ 0x21, KEY_SLEEP},
+	{ 0x24, KEY_ZOOM},
+	{ 0x25, KEY_LAST},	/* Recall */
+	{ 0x26, KEY_SUBTITLE},	/* CC */
+	{ 0x27, KEY_LANGUAGE},	/* MTS */
+	{ 0x29, KEY_CHANNEL},	/* SURF */
+	{ 0x2b, KEY_A},
+	{ 0x2c, KEY_B},
+	{ 0x2f, KEY_CAMERA},	/* Snapshot */
+	{ 0x23, KEY_RADIO},
+	{ 0x02, KEY_PREVIOUSSONG},
+	{ 0x06, KEY_NEXTSONG},
+	{ 0x03, KEY_EPG},
+	{ 0x09, KEY_SETUP},
+	{ 0x22, KEY_BACKSPACE},
+	{ 0x0c, KEY_UP},
+	{ 0x0e, KEY_DOWN},
+	{ 0x0b, KEY_LEFT},
+	{ 0x0d, KEY_RIGHT},
+	{ 0x11, KEY_ENTER},
+	{ 0x20, KEY_TEXT},
+};
+
+static struct rc_keymap videomate_s350_map = {
+	.map = {
+		.scan    = videomate_s350,
+		.size    = ARRAY_SIZE(videomate_s350),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_VIDEOMATE_S350,
+	}
+};
+
+static int __init init_rc_map_videomate_s350(void)
+{
+	return ir_register_map(&videomate_s350_map);
+}
+
+static void __exit exit_rc_map_videomate_s350(void)
+{
+	ir_unregister_map(&videomate_s350_map);
+}
+
+module_init(init_rc_map_videomate_s350)
+module_exit(exit_rc_map_videomate_s350)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
new file mode 100644
index 000000000000..776b0a638d87
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -0,0 +1,87 @@
+/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode videomate_tv_pvr[] = {
+	{ 0x14, KEY_MUTE },
+	{ 0x24, KEY_ZOOM },
+
+	{ 0x01, KEY_DVD },
+	{ 0x23, KEY_RADIO },
+	{ 0x00, KEY_TV },
+
+	{ 0x0a, KEY_REWIND },
+	{ 0x08, KEY_PLAYPAUSE },
+	{ 0x0f, KEY_FORWARD },
+
+	{ 0x02, KEY_PREVIOUS },
+	{ 0x07, KEY_STOP },
+	{ 0x06, KEY_NEXT },
+
+	{ 0x0c, KEY_UP },
+	{ 0x0e, KEY_DOWN },
+	{ 0x0b, KEY_LEFT },
+	{ 0x0d, KEY_RIGHT },
+	{ 0x11, KEY_OK },
+
+	{ 0x03, KEY_MENU },
+	{ 0x09, KEY_SETUP },
+	{ 0x05, KEY_VIDEO },
+	{ 0x22, KEY_CHANNEL },
+
+	{ 0x12, KEY_VOLUMEUP },
+	{ 0x15, KEY_VOLUMEDOWN },
+	{ 0x10, KEY_CHANNELUP },
+	{ 0x13, KEY_CHANNELDOWN },
+
+	{ 0x04, KEY_RECORD },
+
+	{ 0x16, KEY_1 },
+	{ 0x17, KEY_2 },
+	{ 0x18, KEY_3 },
+	{ 0x19, KEY_4 },
+	{ 0x1a, KEY_5 },
+	{ 0x1b, KEY_6 },
+	{ 0x1c, KEY_7 },
+	{ 0x1d, KEY_8 },
+	{ 0x1e, KEY_9 },
+	{ 0x1f, KEY_0 },
+
+	{ 0x20, KEY_LANGUAGE },
+	{ 0x21, KEY_SLEEP },
+};
+
+static struct rc_keymap videomate_tv_pvr_map = {
+	.map = {
+		.scan    = videomate_tv_pvr,
+		.size    = ARRAY_SIZE(videomate_tv_pvr),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_VIDEOMATE_TV_PVR,
+	}
+};
+
+static int __init init_rc_map_videomate_tv_pvr(void)
+{
+	return ir_register_map(&videomate_tv_pvr_map);
+}
+
+static void __exit exit_rc_map_videomate_tv_pvr(void)
+{
+	ir_unregister_map(&videomate_tv_pvr_map);
+}
+
+module_init(init_rc_map_videomate_tv_pvr)
+module_exit(exit_rc_map_videomate_tv_pvr)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
new file mode 100644
index 000000000000..9d2d550aaa90
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -0,0 +1,82 @@
+/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Leadtek Winfast TV USB II Deluxe remote
+   Magnus Alm <magnus.alm@gmail.com>
+ */
+
+static struct ir_scancode winfast_usbii_deluxe[] = {
+	{ 0x62, KEY_0},
+	{ 0x75, KEY_1},
+	{ 0x76, KEY_2},
+	{ 0x77, KEY_3},
+	{ 0x79, KEY_4},
+	{ 0x7a, KEY_5},
+	{ 0x7b, KEY_6},
+	{ 0x7d, KEY_7},
+	{ 0x7e, KEY_8},
+	{ 0x7f, KEY_9},
+
+	{ 0x38, KEY_CAMERA},		/* SNAPSHOT */
+	{ 0x37, KEY_RECORD},		/* RECORD */
+	{ 0x35, KEY_TIME},		/* TIMESHIFT */
+
+	{ 0x74, KEY_VOLUMEUP},		/* VOLUMEUP */
+	{ 0x78, KEY_VOLUMEDOWN},	/* VOLUMEDOWN */
+	{ 0x64, KEY_MUTE},		/* MUTE */
+
+	{ 0x21, KEY_CHANNEL},		/* SURF */
+	{ 0x7c, KEY_CHANNELUP},		/* CHANNELUP */
+	{ 0x60, KEY_CHANNELDOWN},	/* CHANNELDOWN */
+	{ 0x61, KEY_LAST},		/* LAST CHANNEL (RECALL) */
+
+	{ 0x72, KEY_VIDEO}, 		/* INPUT MODES (TV/FM) */
+
+	{ 0x70, KEY_POWER2},		/* TV ON/OFF */
+
+	{ 0x39, KEY_CYCLEWINDOWS},	/* MINIMIZE (BOSS) */
+	{ 0x3a, KEY_NEW},		/* PIP */
+	{ 0x73, KEY_ZOOM},		/* FULLSECREEN */
+
+	{ 0x66, KEY_INFO},		/* OSD (DISPLAY) */
+
+	{ 0x31, KEY_DOT},		/* '.' */
+	{ 0x63, KEY_ENTER},		/* ENTER */
+
+};
+
+static struct rc_keymap winfast_usbii_deluxe_map = {
+	.map = {
+		.scan    = winfast_usbii_deluxe,
+		.size    = ARRAY_SIZE(winfast_usbii_deluxe),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_WINFAST_USBII_DELUXE,
+	}
+};
+
+static int __init init_rc_map_winfast_usbii_deluxe(void)
+{
+	return ir_register_map(&winfast_usbii_deluxe_map);
+}
+
+static void __exit exit_rc_map_winfast_usbii_deluxe(void)
+{
+	ir_unregister_map(&winfast_usbii_deluxe_map);
+}
+
+module_init(init_rc_map_winfast_usbii_deluxe)
+module_exit(exit_rc_map_winfast_usbii_deluxe)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
new file mode 100644
index 000000000000..0e90a3bd9499
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -0,0 +1,102 @@
+/* winfast.h - Keytable for winfast Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
+
+static struct ir_scancode winfast[] = {
+	/* Keys 0 to 9 */
+	{ 0x12, KEY_0 },
+	{ 0x05, KEY_1 },
+	{ 0x06, KEY_2 },
+	{ 0x07, KEY_3 },
+	{ 0x09, KEY_4 },
+	{ 0x0a, KEY_5 },
+	{ 0x0b, KEY_6 },
+	{ 0x0d, KEY_7 },
+	{ 0x0e, KEY_8 },
+	{ 0x0f, KEY_9 },
+
+	{ 0x00, KEY_POWER },
+	{ 0x1b, KEY_AUDIO },		/* Audio Source */
+	{ 0x02, KEY_TUNER },		/* TV/FM, not on Y0400052 */
+	{ 0x1e, KEY_VIDEO },		/* Video Source */
+	{ 0x16, KEY_INFO },		/* Display information */
+	{ 0x04, KEY_VOLUMEUP },
+	{ 0x08, KEY_VOLUMEDOWN },
+	{ 0x0c, KEY_CHANNELUP },
+	{ 0x10, KEY_CHANNELDOWN },
+	{ 0x03, KEY_ZOOM },		/* fullscreen */
+	{ 0x1f, KEY_TEXT },		/* closed caption/teletext */
+	{ 0x20, KEY_SLEEP },
+	{ 0x29, KEY_CLEAR },		/* boss key */
+	{ 0x14, KEY_MUTE },
+	{ 0x2b, KEY_RED },
+	{ 0x2c, KEY_GREEN },
+	{ 0x2d, KEY_YELLOW },
+	{ 0x2e, KEY_BLUE },
+	{ 0x18, KEY_KPPLUS },		/* fine tune + , not on Y040052 */
+	{ 0x19, KEY_KPMINUS },		/* fine tune - , not on Y040052 */
+	{ 0x2a, KEY_MEDIA },		/* PIP (Picture in picture */
+	{ 0x21, KEY_DOT },
+	{ 0x13, KEY_ENTER },
+	{ 0x11, KEY_LAST },		/* Recall (last channel */
+	{ 0x22, KEY_PREVIOUS },
+	{ 0x23, KEY_PLAYPAUSE },
+	{ 0x24, KEY_NEXT },
+	{ 0x25, KEY_TIME },		/* Time Shifting */
+	{ 0x26, KEY_STOP },
+	{ 0x27, KEY_RECORD },
+	{ 0x28, KEY_SAVE },		/* Screenshot */
+	{ 0x2f, KEY_MENU },
+	{ 0x30, KEY_CANCEL },
+	{ 0x31, KEY_CHANNEL },		/* Channel Surf */
+	{ 0x32, KEY_SUBTITLE },
+	{ 0x33, KEY_LANGUAGE },
+	{ 0x34, KEY_REWIND },
+	{ 0x35, KEY_FASTFORWARD },
+	{ 0x36, KEY_TV },
+	{ 0x37, KEY_RADIO },		/* FM */
+	{ 0x38, KEY_DVD },
+
+	{ 0x1a, KEY_MODE},		/* change to MCE mode on Y04G0051 */
+	{ 0x3e, KEY_F21 },		/* MCE +VOL, on Y04G0033 */
+	{ 0x3a, KEY_F22 },		/* MCE -VOL, on Y04G0033 */
+	{ 0x3b, KEY_F23 },		/* MCE +CH,  on Y04G0033 */
+	{ 0x3f, KEY_F24 }		/* MCE -CH,  on Y04G0033 */
+};
+
+static struct rc_keymap winfast_map = {
+	.map = {
+		.scan    = winfast,
+		.size    = ARRAY_SIZE(winfast),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_WINFAST,
+	}
+};
+
+static int __init init_rc_map_winfast(void)
+{
+	return ir_register_map(&winfast_map);
+}
+
+static void __exit exit_rc_map_winfast(void)
+{
+	ir_unregister_map(&winfast_map);
+}
+
+module_init(init_rc_map_winfast)
+module_exit(exit_rc_map_winfast)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
new file mode 100644
index 000000000000..756656e17bdd
--- /dev/null
+++ b/drivers/media/rc/lirc_dev.c
@@ -0,0 +1,814 @@
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+static int debug;
+
+#define IRCTL_DEV_NAME	"BaseRemoteCtl"
+#define NOPLUG		-1
+#define LOGHEAD		"lirc_dev (%s[%d]): "
+
+static dev_t lirc_base_dev;
+
+struct irctl {
+	struct lirc_driver d;
+	int attached;
+	int open;
+
+	struct mutex irctl_lock;
+	struct lirc_buffer *buf;
+	unsigned int chunk_size;
+
+	struct task_struct *task;
+	long jiffies_to_wait;
+};
+
+static DEFINE_MUTEX(lirc_dev_lock);
+
+static struct irctl *irctls[MAX_IRCTL_DEVICES];
+static struct cdev cdevs[MAX_IRCTL_DEVICES];
+
+/* Only used for sysfs but defined to void otherwise */
+static struct class *lirc_class;
+
+/*  helper function
+ *  initializes the irctl structure
+ */
+static void lirc_irctl_init(struct irctl *ir)
+{
+	mutex_init(&ir->irctl_lock);
+	ir->d.minor = NOPLUG;
+}
+
+static void lirc_irctl_cleanup(struct irctl *ir)
+{
+	dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor);
+
+	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+
+	if (ir->buf != ir->d.rbuf) {
+		lirc_buffer_free(ir->buf);
+		kfree(ir->buf);
+	}
+	ir->buf = NULL;
+}
+
+/*  helper function
+ *  reads key codes from driver and puts them into buffer
+ *  returns 0 on success
+ */
+static int lirc_add_to_buf(struct irctl *ir)
+{
+	if (ir->d.add_to_buf) {
+		int res = -ENODATA;
+		int got_data = 0;
+
+		/*
+		 * service the device as long as it is returning
+		 * data and we have space
+		 */
+get_data:
+		res = ir->d.add_to_buf(ir->d.data, ir->buf);
+		if (res == 0) {
+			got_data++;
+			goto get_data;
+		}
+
+		if (res == -ENODEV)
+			kthread_stop(ir->task);
+
+		return got_data ? 0 : res;
+	}
+
+	return 0;
+}
+
+/* main function of the polling thread
+ */
+static int lirc_thread(void *irctl)
+{
+	struct irctl *ir = irctl;
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n",
+		ir->d.name, ir->d.minor);
+
+	do {
+		if (ir->open) {
+			if (ir->jiffies_to_wait) {
+				set_current_state(TASK_INTERRUPTIBLE);
+				schedule_timeout(ir->jiffies_to_wait);
+			}
+			if (kthread_should_stop())
+				break;
+			if (!lirc_add_to_buf(ir))
+				wake_up_interruptible(&ir->buf->wait_poll);
+		} else {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule();
+		}
+	} while (!kthread_should_stop());
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n",
+		ir->d.name, ir->d.minor);
+
+	return 0;
+}
+
+
+static struct file_operations lirc_dev_fops = {
+	.owner		= THIS_MODULE,
+	.read		= lirc_dev_fop_read,
+	.write		= lirc_dev_fop_write,
+	.poll		= lirc_dev_fop_poll,
+	.unlocked_ioctl	= lirc_dev_fop_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= lirc_dev_fop_ioctl,
+#endif
+	.open		= lirc_dev_fop_open,
+	.release	= lirc_dev_fop_close,
+	.llseek		= noop_llseek,
+};
+
+static int lirc_cdev_add(struct irctl *ir)
+{
+	int retval;
+	struct lirc_driver *d = &ir->d;
+	struct cdev *cdev = &cdevs[d->minor];
+
+	if (d->fops) {
+		cdev_init(cdev, d->fops);
+		cdev->owner = d->owner;
+	} else {
+		cdev_init(cdev, &lirc_dev_fops);
+		cdev->owner = THIS_MODULE;
+	}
+	kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+
+	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
+	if (retval)
+		kobject_put(&cdev->kobj);
+
+	return retval;
+}
+
+int lirc_register_driver(struct lirc_driver *d)
+{
+	struct irctl *ir;
+	int minor;
+	int bytes_in_key;
+	unsigned int chunk_size;
+	unsigned int buffer_size;
+	int err;
+
+	if (!d) {
+		printk(KERN_ERR "lirc_dev: lirc_register_driver: "
+		       "driver pointer must be not NULL!\n");
+		err = -EBADRQC;
+		goto out;
+	}
+
+	if (!d->dev) {
+		printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__);
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (MAX_IRCTL_DEVICES <= d->minor) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"\"minor\" must be between 0 and %d (%d)!\n",
+			MAX_IRCTL_DEVICES-1, d->minor);
+		err = -EBADRQC;
+		goto out;
+	}
+
+	if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"code length in bits for minor (%d) "
+			"must be less than %d!\n",
+			d->minor, BUFLEN * 8);
+		err = -EBADRQC;
+		goto out;
+	}
+
+	dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n",
+		d->sample_rate);
+	if (d->sample_rate) {
+		if (2 > d->sample_rate || HZ < d->sample_rate) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"sample_rate must be between 2 and %d!\n", HZ);
+			err = -EBADRQC;
+			goto out;
+		}
+		if (!d->add_to_buf) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"add_to_buf cannot be NULL when "
+				"sample_rate is set\n");
+			err = -EBADRQC;
+			goto out;
+		}
+	} else if (!(d->fops && d->fops->read) && !d->rbuf) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"fops->read and rbuf cannot all be NULL!\n");
+		err = -EBADRQC;
+		goto out;
+	} else if (!d->rbuf) {
+		if (!(d->fops && d->fops->read && d->fops->poll &&
+		      d->fops->unlocked_ioctl)) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"neither read, poll nor unlocked_ioctl can be NULL!\n");
+			err = -EBADRQC;
+			goto out;
+		}
+	}
+
+	mutex_lock(&lirc_dev_lock);
+
+	minor = d->minor;
+
+	if (minor < 0) {
+		/* find first free slot for driver */
+		for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++)
+			if (!irctls[minor])
+				break;
+		if (MAX_IRCTL_DEVICES == minor) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"no free slots for drivers!\n");
+			err = -ENOMEM;
+			goto out_lock;
+		}
+	} else if (irctls[minor]) {
+		dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+			"minor (%d) just registered!\n", minor);
+		err = -EBUSY;
+		goto out_lock;
+	}
+
+	ir = kzalloc(sizeof(struct irctl), GFP_KERNEL);
+	if (!ir) {
+		err = -ENOMEM;
+		goto out_lock;
+	}
+	lirc_irctl_init(ir);
+	irctls[minor] = ir;
+	d->minor = minor;
+
+	if (d->sample_rate) {
+		ir->jiffies_to_wait = HZ / d->sample_rate;
+	} else {
+		/* it means - wait for external event in task queue */
+		ir->jiffies_to_wait = 0;
+	}
+
+	/* some safety check 8-) */
+	d->name[sizeof(d->name)-1] = '\0';
+
+	bytes_in_key = BITS_TO_LONGS(d->code_length) +
+			(d->code_length % 8 ? 1 : 0);
+	buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key;
+	chunk_size  = d->chunk_size  ? d->chunk_size  : bytes_in_key;
+
+	if (d->rbuf) {
+		ir->buf = d->rbuf;
+	} else {
+		ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+		if (!ir->buf) {
+			err = -ENOMEM;
+			goto out_lock;
+		}
+		err = lirc_buffer_init(ir->buf, chunk_size, buffer_size);
+		if (err) {
+			kfree(ir->buf);
+			goto out_lock;
+		}
+	}
+	ir->chunk_size = ir->buf->chunk_size;
+
+	if (d->features == 0)
+		d->features = LIRC_CAN_REC_LIRCCODE;
+
+	ir->d = *d;
+
+	device_create(lirc_class, ir->d.dev,
+		      MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL,
+		      "lirc%u", ir->d.minor);
+
+	if (d->sample_rate) {
+		/* try to fire up polling thread */
+		ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
+		if (IS_ERR(ir->task)) {
+			dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+				"cannot run poll thread for minor = %d\n",
+				d->minor);
+			err = -ECHILD;
+			goto out_sysfs;
+		}
+	}
+
+	err = lirc_cdev_add(ir);
+	if (err)
+		goto out_sysfs;
+
+	ir->attached = 1;
+	mutex_unlock(&lirc_dev_lock);
+
+	dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n",
+		 ir->d.name, ir->d.minor);
+	return minor;
+
+out_sysfs:
+	device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+out_lock:
+	mutex_unlock(&lirc_dev_lock);
+out:
+	return err;
+}
+EXPORT_SYMBOL(lirc_register_driver);
+
+int lirc_unregister_driver(int minor)
+{
+	struct irctl *ir;
+	struct cdev *cdev;
+
+	if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
+		printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
+		       "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+		return -EBADRQC;
+	}
+
+	ir = irctls[minor];
+	if (!ir) {
+		printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct "
+		       "for minor %d!\n", __func__, minor);
+		return -ENOENT;
+	}
+
+	cdev = &cdevs[minor];
+
+	mutex_lock(&lirc_dev_lock);
+
+	if (ir->d.minor != minor) {
+		printk(KERN_ERR "lirc_dev: %s: minor (%d) device not "
+		       "registered!\n", __func__, minor);
+		mutex_unlock(&lirc_dev_lock);
+		return -ENOENT;
+	}
+
+	/* end up polling thread */
+	if (ir->task)
+		kthread_stop(ir->task);
+
+	dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n",
+		ir->d.name, ir->d.minor);
+
+	ir->attached = 0;
+	if (ir->open) {
+		dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n",
+			ir->d.name, ir->d.minor);
+		wake_up_interruptible(&ir->buf->wait_poll);
+		mutex_lock(&ir->irctl_lock);
+		ir->d.set_use_dec(ir->d.data);
+		module_put(cdev->owner);
+		mutex_unlock(&ir->irctl_lock);
+	} else {
+		lirc_irctl_cleanup(ir);
+		cdev_del(cdev);
+		kfree(ir);
+		irctls[minor] = NULL;
+	}
+
+	mutex_unlock(&lirc_dev_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(lirc_unregister_driver);
+
+int lirc_dev_fop_open(struct inode *inode, struct file *file)
+{
+	struct irctl *ir;
+	struct cdev *cdev;
+	int retval = 0;
+
+	if (iminor(inode) >= MAX_IRCTL_DEVICES) {
+		printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
+		       iminor(inode));
+		return -ENODEV;
+	}
+
+	if (mutex_lock_interruptible(&lirc_dev_lock))
+		return -ERESTARTSYS;
+
+	ir = irctls[iminor(inode)];
+	if (!ir) {
+		retval = -ENODEV;
+		goto error;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor);
+
+	if (ir->d.minor == NOPLUG) {
+		retval = -ENODEV;
+		goto error;
+	}
+
+	if (ir->open) {
+		retval = -EBUSY;
+		goto error;
+	}
+
+	cdev = &cdevs[iminor(inode)];
+	if (try_module_get(cdev->owner)) {
+		ir->open++;
+		retval = ir->d.set_use_inc(ir->d.data);
+
+		if (retval) {
+			module_put(cdev->owner);
+			ir->open--;
+		} else {
+			lirc_buffer_clear(ir->buf);
+		}
+		if (ir->task)
+			wake_up_process(ir->task);
+	}
+
+error:
+	if (ir)
+		dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n",
+			ir->d.name, ir->d.minor, retval);
+
+	mutex_unlock(&lirc_dev_lock);
+
+	nonseekable_open(inode, file);
+
+	return retval;
+}
+EXPORT_SYMBOL(lirc_dev_fop_open);
+
+int lirc_dev_fop_close(struct inode *inode, struct file *file)
+{
+	struct irctl *ir = irctls[iminor(inode)];
+	struct cdev *cdev = &cdevs[iminor(inode)];
+
+	if (!ir) {
+		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+		return -EINVAL;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
+
+	WARN_ON(mutex_lock_killable(&lirc_dev_lock));
+
+	ir->open--;
+	if (ir->attached) {
+		ir->d.set_use_dec(ir->d.data);
+		module_put(cdev->owner);
+	} else {
+		lirc_irctl_cleanup(ir);
+		cdev_del(cdev);
+		irctls[ir->d.minor] = NULL;
+		kfree(ir);
+	}
+
+	mutex_unlock(&lirc_dev_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(lirc_dev_fop_close);
+
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+	unsigned int ret;
+
+	if (!ir) {
+		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+		return POLLERR;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
+
+	if (!ir->attached)
+		return POLLERR;
+
+	poll_wait(file, &ir->buf->wait_poll, wait);
+
+	if (ir->buf)
+		if (lirc_buffer_empty(ir->buf))
+			ret = 0;
+		else
+			ret = POLLIN | POLLRDNORM;
+	else
+		ret = POLLERR;
+
+	dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
+		ir->d.name, ir->d.minor, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(lirc_dev_fop_poll);
+
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	__u32 mode;
+	int result = 0;
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+
+	if (!ir) {
+		printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__);
+		return -ENODEV;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n",
+		ir->d.name, ir->d.minor, cmd);
+
+	if (ir->d.minor == NOPLUG || !ir->attached) {
+		dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
+			ir->d.name, ir->d.minor);
+		return -ENODEV;
+	}
+
+	mutex_lock(&ir->irctl_lock);
+
+	switch (cmd) {
+	case LIRC_GET_FEATURES:
+		result = put_user(ir->d.features, (__u32 *)arg);
+		break;
+	case LIRC_GET_REC_MODE:
+		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(LIRC_REC2MODE
+				  (ir->d.features & LIRC_CAN_REC_MASK),
+				  (__u32 *)arg);
+		break;
+	case LIRC_SET_REC_MODE:
+		if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = get_user(mode, (__u32 *)arg);
+		if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
+			result = -EINVAL;
+		/*
+		 * FIXME: We should actually set the mode somehow but
+		 * for now, lirc_serial doesn't support mode changing either
+		 */
+		break;
+	case LIRC_GET_LENGTH:
+		result = put_user(ir->d.code_length, (__u32 *)arg);
+		break;
+	case LIRC_GET_MIN_TIMEOUT:
+		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+		    ir->d.min_timeout == 0) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(ir->d.min_timeout, (__u32 *)arg);
+		break;
+	case LIRC_GET_MAX_TIMEOUT:
+		if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+		    ir->d.max_timeout == 0) {
+			result = -ENOSYS;
+			break;
+		}
+
+		result = put_user(ir->d.max_timeout, (__u32 *)arg);
+		break;
+	default:
+		result = -EINVAL;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n",
+		ir->d.name, ir->d.minor, result);
+
+	mutex_unlock(&ir->irctl_lock);
+
+	return result;
+}
+EXPORT_SYMBOL(lirc_dev_fop_ioctl);
+
+ssize_t lirc_dev_fop_read(struct file *file,
+			  char *buffer,
+			  size_t length,
+			  loff_t *ppos)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+	unsigned char *buf;
+	int ret = 0, written = 0;
+	DECLARE_WAITQUEUE(wait, current);
+
+	if (!ir) {
+		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+		return -ENODEV;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor);
+
+	buf = kzalloc(ir->chunk_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (mutex_lock_interruptible(&ir->irctl_lock)) {
+		ret = -ERESTARTSYS;
+		goto out_unlocked;
+	}
+	if (!ir->attached) {
+		ret = -ENODEV;
+		goto out_locked;
+	}
+
+	if (length % ir->chunk_size) {
+		ret = -EINVAL;
+		goto out_locked;
+	}
+
+	/*
+	 * we add ourselves to the task queue before buffer check
+	 * to avoid losing scan code (in case when queue is awaken somewhere
+	 * between while condition checking and scheduling)
+	 */
+	add_wait_queue(&ir->buf->wait_poll, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	/*
+	 * while we didn't provide 'length' bytes, device is opened in blocking
+	 * mode and 'copy_to_user' is happy, wait for data.
+	 */
+	while (written < length && ret == 0) {
+		if (lirc_buffer_empty(ir->buf)) {
+			/* According to the read(2) man page, 'written' can be
+			 * returned as less than 'length', instead of blocking
+			 * again, returning -EWOULDBLOCK, or returning
+			 * -ERESTARTSYS */
+			if (written)
+				break;
+			if (file->f_flags & O_NONBLOCK) {
+				ret = -EWOULDBLOCK;
+				break;
+			}
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+
+			mutex_unlock(&ir->irctl_lock);
+			schedule();
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			if (mutex_lock_interruptible(&ir->irctl_lock)) {
+				ret = -ERESTARTSYS;
+				remove_wait_queue(&ir->buf->wait_poll, &wait);
+				set_current_state(TASK_RUNNING);
+				goto out_unlocked;
+			}
+
+			if (!ir->attached) {
+				ret = -ENODEV;
+				break;
+			}
+		} else {
+			lirc_buffer_read(ir->buf, buf);
+			ret = copy_to_user((void *)buffer+written, buf,
+					   ir->buf->chunk_size);
+			if (!ret)
+				written += ir->buf->chunk_size;
+			else
+				ret = -EFAULT;
+		}
+	}
+
+	remove_wait_queue(&ir->buf->wait_poll, &wait);
+	set_current_state(TASK_RUNNING);
+
+out_locked:
+	mutex_unlock(&ir->irctl_lock);
+
+out_unlocked:
+	kfree(buf);
+	dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
+		ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
+
+	return ret ? ret : written;
+}
+EXPORT_SYMBOL(lirc_dev_fop_read);
+
+void *lirc_get_pdata(struct file *file)
+{
+	void *data = NULL;
+
+	if (file && file->f_dentry && file->f_dentry->d_inode &&
+	    file->f_dentry->d_inode->i_rdev) {
+		struct irctl *ir;
+		ir = irctls[iminor(file->f_dentry->d_inode)];
+		data = ir->d.data;
+	}
+
+	return data;
+}
+EXPORT_SYMBOL(lirc_get_pdata);
+
+
+ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
+			   size_t length, loff_t *ppos)
+{
+	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+
+	if (!ir) {
+		printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+		return -ENODEV;
+	}
+
+	dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor);
+
+	if (!ir->attached)
+		return -ENODEV;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(lirc_dev_fop_write);
+
+
+static int __init lirc_dev_init(void)
+{
+	int retval;
+
+	lirc_class = class_create(THIS_MODULE, "lirc");
+	if (IS_ERR(lirc_class)) {
+		retval = PTR_ERR(lirc_class);
+		printk(KERN_ERR "lirc_dev: class_create failed\n");
+		goto error;
+	}
+
+	retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES,
+				     IRCTL_DEV_NAME);
+	if (retval) {
+		class_destroy(lirc_class);
+		printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
+		goto error;
+	}
+
+
+	printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
+	       "major %d \n", MAJOR(lirc_base_dev));
+
+error:
+	return retval;
+}
+
+
+
+static void __exit lirc_dev_exit(void)
+{
+	class_destroy(lirc_class);
+	unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
+	printk(KERN_INFO "lirc_dev: module unloaded\n");
+}
+
+module_init(lirc_dev_init);
+module_exit(lirc_dev_exit);
+
+MODULE_DESCRIPTION("LIRC base driver module");
+MODULE_AUTHOR("Artur Lipowski");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
new file mode 100644
index 000000000000..392ca24132da
--- /dev/null
+++ b/drivers/media/rc/mceusb.c
@@ -0,0 +1,1333 @@
+/*
+ * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
+ * Conti, Martin Blatter and Daniel Melander, the latter of which was
+ * in turn also based on the lirc_atiusb driver by Paul Miller. The
+ * two mce drivers were merged into one by Jarod Wilson, with transmit
+ * support for the 1st-gen device added primarily by Patrick Calhoun,
+ * with a bit of tweaks by Jarod. Debugging improvements and proper
+ * support for what appears to be 3rd-gen hardware added by Jarod.
+ * Initial port from lirc driver to ir-core drivery by Jarod, based
+ * partially on a port to an earlier proposed IR infrastructure by
+ * Jon Smirl, which included enhancements and simplifications to the
+ * incoming IR buffer parsing routines.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION	"1.91"
+#define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
+#define DRIVER_DESC	"Windows Media Center Ed. eHome Infrared Transceiver " \
+			"device driver"
+#define DRIVER_NAME	"mceusb"
+
+#define USB_BUFLEN		32 /* USB reception buffer length */
+#define USB_CTRL_MSG_SZ		2  /* Size of usb ctrl msg on gen1 hw */
+#define MCE_G1_INIT_MSGS	40 /* Init messages on gen1 hw to throw out */
+#define MS_TO_NS(msec)		((msec) * 1000)
+
+/* MCE constants */
+#define MCE_CMDBUF_SIZE		384  /* MCE Command buffer length */
+#define MCE_TIME_UNIT		50   /* Approx 50us resolution */
+#define MCE_CODE_LENGTH		5    /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE		4    /* Normal length of packet (without header) */
+#define MCE_IRDATA_HEADER	0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_IRDATA_TRAILER	0x80 /* End of IR data */
+#define MCE_TX_HEADER_LENGTH	3    /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS	2    /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK	0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT		0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK		0x7f /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH	0x7f /* Longest transmittable pulse symbol */
+
+#define MCE_HW_CMD_HEADER	0xff	/* MCE hardware command header */
+#define MCE_COMMAND_HEADER	0x9f	/* MCE command header */
+#define MCE_COMMAND_MASK	0xe0	/* Mask out command bits */
+#define MCE_COMMAND_NULL	0x00	/* These show up various places... */
+/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
+ * then we're looking at a raw IR data sample */
+#define MCE_COMMAND_IRDATA	0x80
+#define MCE_PACKET_LENGTH_MASK	0x1f /* Packet length mask */
+
+/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+#define MCE_CMD_SIG_END		0x01	/* End of signal */
+#define MCE_CMD_PING		0x03	/* Ping device */
+#define MCE_CMD_UNKNOWN		0x04	/* Unknown */
+#define MCE_CMD_UNKNOWN2	0x05	/* Unknown */
+#define MCE_CMD_S_CARRIER	0x06	/* Set TX carrier frequency */
+#define MCE_CMD_G_CARRIER	0x07	/* Get TX carrier frequency */
+#define MCE_CMD_S_TXMASK	0x08	/* Set TX port bitmask */
+#define MCE_CMD_UNKNOWN3	0x09	/* Unknown */
+#define MCE_CMD_UNKNOWN4	0x0a	/* Unknown */
+#define MCE_CMD_G_REVISION	0x0b	/* Get hw/sw revision */
+#define MCE_CMD_S_TIMEOUT	0x0c	/* Set RX timeout value */
+#define MCE_CMD_G_TIMEOUT	0x0d	/* Get RX timeout value */
+#define MCE_CMD_UNKNOWN5	0x0e	/* Unknown */
+#define MCE_CMD_UNKNOWN6	0x0f	/* Unknown */
+#define MCE_CMD_G_RXPORTSTS	0x11	/* Get RX port status */
+#define MCE_CMD_G_TXMASK	0x13	/* Set TX port bitmask */
+#define MCE_CMD_S_RXSENSOR	0x14	/* Set RX sensor (std/learning) */
+#define MCE_CMD_G_RXSENSOR	0x15	/* Get RX sensor (std/learning) */
+#define MCE_RSP_PULSE_COUNT	0x15	/* RX pulse count (only if learning) */
+#define MCE_CMD_TX_PORTS	0x16	/* Get number of TX ports */
+#define MCE_CMD_G_WAKESRC	0x17	/* Get wake source */
+#define MCE_CMD_UNKNOWN7	0x18	/* Unknown */
+#define MCE_CMD_UNKNOWN8	0x19	/* Unknown */
+#define MCE_CMD_UNKNOWN9	0x1b	/* Unknown */
+#define MCE_CMD_DEVICE_RESET	0xaa	/* Reset the hardware */
+#define MCE_RSP_CMD_INVALID	0xfe	/* Invalid command issued */
+
+
+/* module parameters */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* general constants */
+#define SEND_FLAG_IN_PROGRESS	1
+#define SEND_FLAG_COMPLETE	2
+#define RECV_FLAG_IN_PROGRESS	3
+#define RECV_FLAG_COMPLETE	4
+
+#define MCEUSB_RX		1
+#define MCEUSB_TX		2
+
+#define VENDOR_PHILIPS		0x0471
+#define VENDOR_SMK		0x0609
+#define VENDOR_TATUNG		0x1460
+#define VENDOR_GATEWAY		0x107b
+#define VENDOR_SHUTTLE		0x1308
+#define VENDOR_SHUTTLE2		0x051c
+#define VENDOR_MITSUMI		0x03ee
+#define VENDOR_TOPSEED		0x1784
+#define VENDOR_RICAVISION	0x179d
+#define VENDOR_ITRON		0x195d
+#define VENDOR_FIC		0x1509
+#define VENDOR_LG		0x043e
+#define VENDOR_MICROSOFT	0x045e
+#define VENDOR_FORMOSA		0x147a
+#define VENDOR_FINTEK		0x1934
+#define VENDOR_PINNACLE		0x2304
+#define VENDOR_ECS		0x1019
+#define VENDOR_WISTRON		0x0fb8
+#define VENDOR_COMPRO		0x185b
+#define VENDOR_NORTHSTAR	0x04eb
+#define VENDOR_REALTEK		0x0bda
+#define VENDOR_TIVO		0x105a
+#define VENDOR_CONEXANT		0x0572
+
+enum mceusb_model_type {
+	MCE_GEN2 = 0,		/* Most boards */
+	MCE_GEN1,
+	MCE_GEN3,
+	MCE_GEN2_TX_INV,
+	POLARIS_EVK,
+	CX_HYBRID_TV,
+};
+
+struct mceusb_model {
+	u32 mce_gen1:1;
+	u32 mce_gen2:1;
+	u32 mce_gen3:1;
+	u32 tx_mask_normal:1;
+	u32 is_polaris:1;
+	u32 no_tx:1;
+
+	const char *rc_map;	/* Allow specify a per-board map */
+	const char *name;	/* per-board name */
+};
+
+static const struct mceusb_model mceusb_model[] = {
+	[MCE_GEN1] = {
+		.mce_gen1 = 1,
+		.tx_mask_normal = 1,
+	},
+	[MCE_GEN2] = {
+		.mce_gen2 = 1,
+	},
+	[MCE_GEN2_TX_INV] = {
+		.mce_gen2 = 1,
+		.tx_mask_normal = 1,
+	},
+	[MCE_GEN3] = {
+		.mce_gen3 = 1,
+		.tx_mask_normal = 1,
+	},
+	[POLARIS_EVK] = {
+		.is_polaris = 1,
+		/*
+		 * In fact, the EVK is shipped without
+		 * remotes, but we should have something handy,
+		 * to allow testing it
+		 */
+		.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
+	},
+	[CX_HYBRID_TV] = {
+		.is_polaris = 1,
+		.no_tx = 1, /* tx isn't wired up at all */
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
+	},
+};
+
+static struct usb_device_id mceusb_dev_table[] = {
+	/* Original Microsoft MCE IR Transceiver (often HP-branded) */
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x006d),
+	  .driver_info = MCE_GEN1 },
+	/* Philips Infrared Transceiver - Sahara branded */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
+	/* Philips Infrared Transceiver - HP branded */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060c),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Philips SRM5100 */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
+	/* Philips Infrared Transceiver - Omaura */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
+	/* Philips Infrared Transceiver - Spinel plus */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
+	/* Philips eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+	/* Philips/Spinel plus IR transceiver for ASUS */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+	/* Realtek MCE IR Receiver */
+	{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
+	/* SMK/Toshiba G83C0004D410 */
+	{ USB_DEVICE(VENDOR_SMK, 0x031d),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* SMK eHome Infrared Transceiver (Sony VAIO) */
+	{ USB_DEVICE(VENDOR_SMK, 0x0322),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* bundled with Hauppauge PVR-150 */
+	{ USB_DEVICE(VENDOR_SMK, 0x0334),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* SMK eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+	/* Tatung eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+	/* Shuttle eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
+	/* Shuttle eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
+	/* Gateway eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
+	/* Mitsumi */
+	{ USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0001),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Topseed HP eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0006),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0007),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0008),
+	  .driver_info = MCE_GEN3 },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x000a),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Topseed eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_TOPSEED, 0x0011),
+	  .driver_info = MCE_GEN2_TX_INV },
+	/* Ricavision internal Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
+	/* Itron ione Libra Q-11 */
+	{ USB_DEVICE(VENDOR_ITRON, 0x7002) },
+	/* FIC eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FIC, 0x9242) },
+	/* LG eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_LG, 0x9803) },
+	/* Microsoft MCE Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
+	/* Formosa eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
+	/* Formosa21 / eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
+	/* Formosa aim / Trust MCE Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
+	/* Formosa Industrial Computing / Beanbag Emulation Device */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
+	/* Formosa21 / eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
+	/* Formosa Industrial Computing AIM IR605/A */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
+	/* Formosa Industrial Computing */
+	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+	/* Fintek eHome Infrared Transceiver (HP branded) */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x5168) },
+	/* Fintek eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x0702) },
+	/* Pinnacle Remote Kit */
+	{ USB_DEVICE(VENDOR_PINNACLE, 0x0225),
+	  .driver_info = MCE_GEN3 },
+	/* Elitegroup Computer Systems IR */
+	{ USB_DEVICE(VENDOR_ECS, 0x0f38) },
+	/* Wistron Corp. eHome Infrared Receiver */
+	{ USB_DEVICE(VENDOR_WISTRON, 0x0002) },
+	/* Compro K100 */
+	{ USB_DEVICE(VENDOR_COMPRO, 0x3020) },
+	/* Compro K100 v2 */
+	{ USB_DEVICE(VENDOR_COMPRO, 0x3082) },
+	/* Northstar Systems, Inc. eHome Infrared Transceiver */
+	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
+	/* TiVo PC IR Receiver */
+	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
+	/* Conexant Hybrid TV "Shelby" Polaris SDK */
+	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
+	  .driver_info = POLARIS_EVK },
+	/* Conexant Hybrid TV RDU253S Polaris */
+	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
+	  .driver_info = CX_HYBRID_TV },
+	/* Terminating entry */
+	{ }
+};
+
+/* data structure for each usb transceiver */
+struct mceusb_dev {
+	/* ir-core bits */
+	struct ir_dev_props *props;
+
+	/* optional features we can enable */
+	bool carrier_report_enabled;
+	bool learning_enabled;
+
+	/* core device bits */
+	struct device *dev;
+	struct input_dev *idev;
+
+	/* usb */
+	struct usb_device *usbdev;
+	struct urb *urb_in;
+	struct usb_endpoint_descriptor *usb_ep_in;
+	struct usb_endpoint_descriptor *usb_ep_out;
+
+	/* buffers and dma */
+	unsigned char *buf_in;
+	unsigned int len_in;
+	dma_addr_t dma_in;
+	dma_addr_t dma_out;
+
+	enum {
+		CMD_HEADER = 0,
+		SUBCMD,
+		CMD_DATA,
+		PARSE_IRDATA,
+	} parser_state;
+
+	u8 cmd, rem;		/* Remaining IR data bytes in packet */
+
+	struct {
+		u32 connected:1;
+		u32 tx_mask_normal:1;
+		u32 microsoft_gen1:1;
+		u32 no_tx:1;
+	} flags;
+
+	/* transmit support */
+	int send_flags;
+	u32 carrier;
+	unsigned char tx_mask;
+
+	char name[128];
+	char phys[64];
+	enum mceusb_model_type model;
+};
+
+/*
+ * MCE Device Command Strings
+ * Device command responses vary from device to device...
+ * - DEVICE_RESET resets the hardware to its default state
+ * - GET_REVISION fetches the hardware/software revision, common
+ *   replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
+ * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
+ *   device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
+ *   meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
+ *   ((clk / frequency) - 1)
+ * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
+ *   response in the form of 9f 0c msb lsb
+ * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
+ *   the form of 9f 08 bm, where bm is the bitmask
+ * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
+ *   general use one or short-range learning one, in the form of
+ *   9f 14 ss, where ss is either 01 for long-range or 02 for short
+ * - SET_CARRIER_FREQ sets a new carrier mode and frequency
+ * - SET_TX_BITMASK sets the transmitter bitmask
+ * - SET_RX_TIMEOUT sets the receiver timeout
+ * - SET_RX_SENSOR sets which receiver sensor to use
+ */
+static char DEVICE_RESET[]	= {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
+				   MCE_CMD_DEVICE_RESET};
+static char GET_REVISION[]	= {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
+static char GET_UNKNOWN[]	= {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
+static char GET_UNKNOWN2[]	= {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
+static char GET_CARRIER_FREQ[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
+static char GET_RX_TIMEOUT[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
+static char GET_TX_BITMASK[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
+static char GET_RX_SENSOR[]	= {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
+/* sub in desired values in lower byte or bytes for full command */
+/* FIXME: make use of these for transmit.
+static char SET_CARRIER_FREQ[]	= {MCE_COMMAND_HEADER,
+				   MCE_CMD_S_CARRIER, 0x00, 0x00};
+static char SET_TX_BITMASK[]	= {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
+static char SET_RX_TIMEOUT[]	= {MCE_COMMAND_HEADER,
+				   MCE_CMD_S_TIMEOUT, 0x00, 0x00};
+static char SET_RX_SENSOR[]	= {MCE_COMMAND_HEADER,
+				   MCE_CMD_S_RXSENSOR, 0x00};
+*/
+
+static int mceusb_cmdsize(u8 cmd, u8 subcmd)
+{
+	int datasize = 0;
+
+	switch (cmd) {
+	case MCE_COMMAND_NULL:
+		if (subcmd == MCE_HW_CMD_HEADER)
+			datasize = 1;
+		break;
+	case MCE_HW_CMD_HEADER:
+		switch (subcmd) {
+		case MCE_CMD_G_REVISION:
+			datasize = 2;
+			break;
+		}
+	case MCE_COMMAND_HEADER:
+		switch (subcmd) {
+		case MCE_CMD_UNKNOWN:
+		case MCE_CMD_S_CARRIER:
+		case MCE_CMD_S_TIMEOUT:
+		case MCE_RSP_PULSE_COUNT:
+			datasize = 2;
+			break;
+		case MCE_CMD_SIG_END:
+		case MCE_CMD_S_TXMASK:
+		case MCE_CMD_S_RXSENSOR:
+			datasize = 1;
+			break;
+		}
+	}
+	return datasize;
+}
+
+static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
+				 int offset, int len, bool out)
+{
+	char codes[USB_BUFLEN * 3 + 1];
+	char inout[9];
+	u8 cmd, subcmd, data1, data2;
+	struct device *dev = ir->dev;
+	int i, start, skip = 0;
+
+	if (!debug)
+		return;
+
+	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+	if (ir->flags.microsoft_gen1 && !out && !offset)
+		skip = 2;
+
+	if (len <= skip)
+		return;
+
+	for (i = 0; i < len && i < USB_BUFLEN; i++)
+		snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff);
+
+	dev_info(dev, "%sx data: %s(length=%d)\n",
+		 (out ? "t" : "r"), codes, len);
+
+	if (out)
+		strcpy(inout, "Request\0");
+	else
+		strcpy(inout, "Got\0");
+
+	start  = offset + skip;
+	cmd    = buf[start] & 0xff;
+	subcmd = buf[start + 1] & 0xff;
+	data1  = buf[start + 2] & 0xff;
+	data2  = buf[start + 3] & 0xff;
+
+	switch (cmd) {
+	case MCE_COMMAND_NULL:
+		if ((subcmd == MCE_HW_CMD_HEADER) &&
+		    (data1 == MCE_CMD_DEVICE_RESET))
+			dev_info(dev, "Device reset requested\n");
+		else
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+		break;
+	case MCE_HW_CMD_HEADER:
+		switch (subcmd) {
+		case MCE_CMD_G_REVISION:
+			if (len == 2)
+				dev_info(dev, "Get hw/sw rev?\n");
+			else
+				dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
+					 "0x%02x 0x%02x\n", data1, data2,
+					 buf[start + 4], buf[start + 5]);
+			break;
+		case MCE_CMD_DEVICE_RESET:
+			dev_info(dev, "Device reset requested\n");
+			break;
+		case MCE_RSP_CMD_INVALID:
+			dev_info(dev, "Previous command not supported\n");
+			break;
+		case MCE_CMD_UNKNOWN7:
+		case MCE_CMD_UNKNOWN9:
+		default:
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+			break;
+		}
+		break;
+	case MCE_COMMAND_HEADER:
+		switch (subcmd) {
+		case MCE_CMD_SIG_END:
+			dev_info(dev, "End of signal\n");
+			break;
+		case MCE_CMD_PING:
+			dev_info(dev, "Ping\n");
+			break;
+		case MCE_CMD_UNKNOWN:
+			dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
+				 data1, data2);
+			break;
+		case MCE_CMD_S_CARRIER:
+			dev_info(dev, "%s carrier mode and freq of "
+				 "0x%02x 0x%02x\n", inout, data1, data2);
+			break;
+		case MCE_CMD_G_CARRIER:
+			dev_info(dev, "Get carrier mode and freq\n");
+			break;
+		case MCE_CMD_S_TXMASK:
+			dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
+				 inout, data1);
+			break;
+		case MCE_CMD_S_TIMEOUT:
+			/* value is in units of 50us, so x*50/100 or x/2 ms */
+			dev_info(dev, "%s receive timeout of %d ms\n",
+				 inout, ((data1 << 8) | data2) / 2);
+			break;
+		case MCE_CMD_G_TIMEOUT:
+			dev_info(dev, "Get receive timeout\n");
+			break;
+		case MCE_CMD_G_TXMASK:
+			dev_info(dev, "Get transmit blaster mask\n");
+			break;
+		case MCE_CMD_S_RXSENSOR:
+			dev_info(dev, "%s %s-range receive sensor in use\n",
+				 inout, data1 == 0x02 ? "short" : "long");
+			break;
+		case MCE_CMD_G_RXSENSOR:
+		/* aka MCE_RSP_PULSE_COUNT */
+			if (out)
+				dev_info(dev, "Get receive sensor\n");
+			else if (ir->learning_enabled)
+				dev_info(dev, "RX pulse count: %d\n",
+					 ((data1 << 8) | data2));
+			break;
+		case MCE_RSP_CMD_INVALID:
+			dev_info(dev, "Error! Hardware is likely wedged...\n");
+			break;
+		case MCE_CMD_UNKNOWN2:
+		case MCE_CMD_UNKNOWN3:
+		case MCE_CMD_UNKNOWN5:
+		default:
+			dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+				 cmd, subcmd);
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (cmd == MCE_IRDATA_TRAILER)
+		dev_info(dev, "End of raw IR data\n");
+	else if ((cmd != MCE_COMMAND_HEADER) &&
+		 ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA))
+		dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
+}
+
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct mceusb_dev *ir;
+	int len;
+
+	if (!urb)
+		return;
+
+	ir = urb->context;
+	if (ir) {
+		len = urb->actual_length;
+
+		dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+			urb->status, len);
+
+		mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
+	}
+
+}
+
+/* request incoming or send outgoing usb packet - used to initialize remote */
+static void mce_request_packet(struct mceusb_dev *ir,
+			       struct usb_endpoint_descriptor *ep,
+			       unsigned char *data, int size, int urb_type)
+{
+	int res;
+	struct urb *async_urb;
+	struct device *dev = ir->dev;
+	unsigned char *async_buf;
+
+	if (urb_type == MCEUSB_TX) {
+		async_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (unlikely(!async_urb)) {
+			dev_err(dev, "Error, couldn't allocate urb!\n");
+			return;
+		}
+
+		async_buf = kzalloc(size, GFP_KERNEL);
+		if (!async_buf) {
+			dev_err(dev, "Error, couldn't allocate buf!\n");
+			usb_free_urb(async_urb);
+			return;
+		}
+
+		/* outbound data */
+		usb_fill_int_urb(async_urb, ir->usbdev,
+			usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
+			async_buf, size, (usb_complete_t)mce_async_callback,
+			ir, ep->bInterval);
+		memcpy(async_buf, data, size);
+
+	} else if (urb_type == MCEUSB_RX) {
+		/* standard request */
+		async_urb = ir->urb_in;
+		ir->send_flags = RECV_FLAG_IN_PROGRESS;
+
+	} else {
+		dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
+		return;
+	}
+
+	dev_dbg(dev, "receive request called (size=%#x)\n", size);
+
+	async_urb->transfer_buffer_length = size;
+	async_urb->dev = ir->usbdev;
+
+	res = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (res) {
+		dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+		return;
+	}
+	dev_dbg(dev, "receive request complete (res=%d)\n", res);
+}
+
+static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+	mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
+}
+
+static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+	mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
+}
+
+/* Send data out the IR blaster port(s) */
+static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+{
+	struct mceusb_dev *ir = priv;
+	int i, ret = 0;
+	int count, cmdcount = 0;
+	unsigned char *cmdbuf; /* MCE command buffer */
+	long signal_duration = 0; /* Singnal length in us */
+	struct timeval start_time, end_time;
+
+	do_gettimeofday(&start_time);
+
+	count = n / sizeof(int);
+
+	cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
+	if (!cmdbuf)
+		return -ENOMEM;
+
+	/* MCE tx init header */
+	cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
+	cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
+	cmdbuf[cmdcount++] = ir->tx_mask;
+
+	/* Generate mce packet data */
+	for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
+		signal_duration += txbuf[i];
+		txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
+
+		do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
+
+			/* Insert mce packet header every 4th entry */
+			if ((cmdcount < MCE_CMDBUF_SIZE) &&
+			    (cmdcount - MCE_TX_HEADER_LENGTH) %
+			     MCE_CODE_LENGTH == 0)
+				cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
+
+			/* Insert mce packet data */
+			if (cmdcount < MCE_CMDBUF_SIZE)
+				cmdbuf[cmdcount++] =
+					(txbuf[i] < MCE_PULSE_BIT ?
+					 txbuf[i] : MCE_MAX_PULSE_LENGTH) |
+					 (i & 1 ? 0x00 : MCE_PULSE_BIT);
+			else {
+				ret = -EINVAL;
+				goto out;
+			}
+
+		} while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
+			 (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
+	}
+
+	/* Fix packet length in last header */
+	cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
+		MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) %
+		MCE_CODE_LENGTH - 1;
+
+	/* Check if we have room for the empty packet at the end */
+	if (cmdcount >= MCE_CMDBUF_SIZE) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* All mce commands end with an empty packet (0x80) */
+	cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
+
+	/* Transmit the command to the mce device */
+	mce_async_out(ir, cmdbuf, cmdcount);
+
+	/*
+	 * The lircd gap calculation expects the write function to
+	 * wait the time it takes for the ircommand to be sent before
+	 * it returns.
+	 */
+	do_gettimeofday(&end_time);
+	signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
+			   (end_time.tv_sec - start_time.tv_sec) * 1000000;
+
+	/* delay with the closest number of ticks */
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(signal_duration));
+
+out:
+	kfree(cmdbuf);
+	return ret ? ret : n;
+}
+
+/* Sets active IR outputs -- mce devices typically have two */
+static int mceusb_set_tx_mask(void *priv, u32 mask)
+{
+	struct mceusb_dev *ir = priv;
+
+	if (ir->flags.tx_mask_normal)
+		ir->tx_mask = mask;
+	else
+		ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
+				mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
+
+	return 0;
+}
+
+/* Sets the send carrier frequency and mode */
+static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+{
+	struct mceusb_dev *ir = priv;
+	int clk = 10000000;
+	int prescaler = 0, divisor = 0;
+	unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
+				    MCE_CMD_S_CARRIER, 0x00, 0x00 };
+
+	/* Carrier has changed */
+	if (ir->carrier != carrier) {
+
+		if (carrier == 0) {
+			ir->carrier = carrier;
+			cmdbuf[2] = MCE_CMD_SIG_END;
+			cmdbuf[3] = MCE_IRDATA_TRAILER;
+			dev_dbg(ir->dev, "%s: disabling carrier "
+				"modulation\n", __func__);
+			mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+			return carrier;
+		}
+
+		for (prescaler = 0; prescaler < 4; ++prescaler) {
+			divisor = (clk >> (2 * prescaler)) / carrier;
+			if (divisor <= 0xff) {
+				ir->carrier = carrier;
+				cmdbuf[2] = prescaler;
+				cmdbuf[3] = divisor;
+				dev_dbg(ir->dev, "%s: requesting %u HZ "
+					"carrier\n", __func__, carrier);
+
+				/* Transmit new carrier to mce device */
+				mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+				return carrier;
+			}
+		}
+
+		return -EINVAL;
+
+	}
+
+	return carrier;
+}
+
+/*
+ * We don't do anything but print debug spew for many of the command bits
+ * we receive from the hardware, but some of them are useful information
+ * we want to store so that we can use them.
+ */
+static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+{
+	u8 hi = ir->buf_in[index + 1] & 0xff;
+	u8 lo = ir->buf_in[index + 2] & 0xff;
+
+	switch (ir->buf_in[index]) {
+	/* 2-byte return value commands */
+	case MCE_CMD_S_TIMEOUT:
+		ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+		break;
+
+	/* 1-byte return value commands */
+	case MCE_CMD_S_TXMASK:
+		ir->tx_mask = hi;
+		break;
+	case MCE_CMD_S_RXSENSOR:
+		ir->learning_enabled = (hi == 0x02);
+		break;
+	default:
+		break;
+	}
+}
+
+static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
+{
+	DEFINE_IR_RAW_EVENT(rawir);
+	int i = 0;
+
+	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+	if (ir->flags.microsoft_gen1)
+		i = 2;
+
+	/* if there's no data, just return now */
+	if (buf_len <= i)
+		return;
+
+	for (; i < buf_len; i++) {
+		switch (ir->parser_state) {
+		case SUBCMD:
+			ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
+			mceusb_dev_printdata(ir, ir->buf_in, i - 1,
+					     ir->rem + 2, false);
+			mceusb_handle_command(ir, i);
+			ir->parser_state = CMD_DATA;
+			break;
+		case PARSE_IRDATA:
+			ir->rem--;
+			rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
+			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
+					 * MS_TO_NS(MCE_TIME_UNIT);
+
+			dev_dbg(ir->dev, "Storing %s with duration %d\n",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+
+			ir_raw_event_store_with_filter(ir->idev, &rawir);
+			break;
+		case CMD_DATA:
+			ir->rem--;
+			break;
+		case CMD_HEADER:
+			/* decode mce packets of the form (84),AA,BB,CC,DD */
+			/* IR data packets can span USB messages - rem */
+			ir->cmd = ir->buf_in[i];
+			if ((ir->cmd == MCE_COMMAND_HEADER) ||
+			    ((ir->cmd & MCE_COMMAND_MASK) !=
+			     MCE_COMMAND_IRDATA)) {
+				ir->parser_state = SUBCMD;
+				continue;
+			}
+			ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
+			mceusb_dev_printdata(ir, ir->buf_in,
+					     i, ir->rem + 1, false);
+			if (ir->rem)
+				ir->parser_state = PARSE_IRDATA;
+			break;
+		}
+
+		if (ir->parser_state != CMD_HEADER && !ir->rem)
+			ir->parser_state = CMD_HEADER;
+	}
+	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+	ir_raw_event_handle(ir->idev);
+}
+
+static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
+{
+	struct mceusb_dev *ir;
+	int buf_len;
+
+	if (!urb)
+		return;
+
+	ir = urb->context;
+	if (!ir) {
+		usb_unlink_urb(urb);
+		return;
+	}
+
+	buf_len = urb->actual_length;
+
+	if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+		ir->send_flags = SEND_FLAG_COMPLETE;
+		dev_dbg(ir->dev, "setup answer received %d bytes\n",
+			buf_len);
+	}
+
+	switch (urb->status) {
+	/* success */
+	case 0:
+		mceusb_process_ir_data(ir, buf_len);
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		usb_unlink_urb(urb);
+		return;
+
+	case -EPIPE:
+	default:
+		dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+		break;
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void mceusb_gen1_init(struct mceusb_dev *ir)
+{
+	int ret;
+	int maxp = ir->len_in;
+	struct device *dev = ir->dev;
+	char *data;
+
+	data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
+	if (!data) {
+		dev_err(dev, "%s: memory allocation failed!\n", __func__);
+		return;
+	}
+
+	/*
+	 * This is a strange one. Windows issues a set address to the device
+	 * on the receive control pipe and expect a certain value pair back
+	 */
+	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+			      USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
+			      data, USB_CTRL_MSG_SZ, HZ * 3);
+	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+	dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+		__func__, data[0], data[1]);
+
+	/* set feature: bit rate 38400 bps */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+			      0xc04e, 0x0000, NULL, 0, HZ * 3);
+
+	dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+
+	/* bRequest 4: set char length to 8 bits */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      4, USB_TYPE_VENDOR,
+			      0x0808, 0x0000, NULL, 0, HZ * 3);
+	dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+
+	/* bRequest 2: set handshaking to use DTR/DSR */
+	ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+			      2, USB_TYPE_VENDOR,
+			      0x0000, 0x0100, NULL, 0, HZ * 3);
+	dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+
+	/* device reset */
+	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get hw/sw revision? */
+	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+	mce_sync_in(ir, NULL, maxp);
+
+	kfree(data);
+};
+
+static void mceusb_gen2_init(struct mceusb_dev *ir)
+{
+	int maxp = ir->len_in;
+
+	/* device reset */
+	mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get hw/sw revision? */
+	mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* unknown what the next two actually return... */
+	mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
+	mce_sync_in(ir, NULL, maxp);
+	mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
+	mce_sync_in(ir, NULL, maxp);
+}
+
+static void mceusb_get_parameters(struct mceusb_dev *ir)
+{
+	int maxp = ir->len_in;
+
+	/* get the carrier and frequency */
+	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
+	mce_sync_in(ir, NULL, maxp);
+
+	if (!ir->flags.no_tx) {
+		/* get the transmitter bitmask */
+		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+		mce_sync_in(ir, NULL, maxp);
+	}
+
+	/* get receiver timeout value */
+	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
+	mce_sync_in(ir, NULL, maxp);
+
+	/* get receiver sensor setting */
+	mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
+	mce_sync_in(ir, NULL, maxp);
+}
+
+static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+{
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	struct device *dev = ir->dev;
+	const char *rc_map = RC_MAP_RC6_MCE;
+	const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
+	int ret = -ENODEV;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(dev, "remote input dev allocation failed\n");
+		goto idev_alloc_failed;
+	}
+
+	ret = -ENOMEM;
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props) {
+		dev_err(dev, "remote ir dev props allocation failed\n");
+		goto props_alloc_failed;
+	}
+
+	if (mceusb_model[ir->model].name)
+		name = mceusb_model[ir->model].name;
+
+	snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
+		 name,
+		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
+		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
+
+	idev->name = ir->name;
+	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+	idev->phys = ir->phys;
+
+	props->priv = ir;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	props->allowed_protos = IR_TYPE_ALL;
+	props->timeout = MS_TO_NS(1000);
+	if (!ir->flags.no_tx) {
+		props->s_tx_mask = mceusb_set_tx_mask;
+		props->s_tx_carrier = mceusb_set_tx_carrier;
+		props->tx_ir = mceusb_tx_ir;
+	}
+
+	ir->props = props;
+
+	usb_to_input_id(ir->usbdev, &idev->id);
+	idev->dev.parent = ir->dev;
+
+	if (mceusb_model[ir->model].rc_map)
+		rc_map = mceusb_model[ir->model].rc_map;
+
+	ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
+	if (ret < 0) {
+		dev_err(dev, "remote input device register failed\n");
+		goto irdev_failed;
+	}
+
+	return idev;
+
+irdev_failed:
+	kfree(props);
+props_alloc_failed:
+	input_free_device(idev);
+idev_alloc_failed:
+	return NULL;
+}
+
+static int __devinit mceusb_dev_probe(struct usb_interface *intf,
+				      const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *idesc;
+	struct usb_endpoint_descriptor *ep = NULL;
+	struct usb_endpoint_descriptor *ep_in = NULL;
+	struct usb_endpoint_descriptor *ep_out = NULL;
+	struct mceusb_dev *ir = NULL;
+	int pipe, maxp, i;
+	char buf[63], name[128] = "";
+	enum mceusb_model_type model = id->driver_info;
+	bool is_gen3;
+	bool is_microsoft_gen1;
+	bool tx_mask_normal;
+	bool is_polaris;
+
+	dev_dbg(&intf->dev, "%s called\n", __func__);
+
+	idesc  = intf->cur_altsetting;
+
+	is_gen3 = mceusb_model[model].mce_gen3;
+	is_microsoft_gen1 = mceusb_model[model].mce_gen1;
+	tx_mask_normal = mceusb_model[model].tx_mask_normal;
+	is_polaris = mceusb_model[model].is_polaris;
+
+	if (is_polaris) {
+		/* Interface 0 is IR */
+		if (idesc->desc.bInterfaceNumber)
+			return -ENODEV;
+	}
+
+	/* step through the endpoints to find first bulk in and out endpoint */
+	for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
+		ep = &idesc->endpoint[i].desc;
+
+		if ((ep_in == NULL)
+			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+			    == USB_DIR_IN)
+			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_BULK)
+			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_INT))) {
+
+			ep_in = ep;
+			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+			ep_in->bInterval = 1;
+			dev_dbg(&intf->dev, "acceptable inbound endpoint "
+				"found\n");
+		}
+
+		if ((ep_out == NULL)
+			&& ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+			    == USB_DIR_OUT)
+			&& (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_BULK)
+			|| ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			    == USB_ENDPOINT_XFER_INT))) {
+
+			ep_out = ep;
+			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+			ep_out->bInterval = 1;
+			dev_dbg(&intf->dev, "acceptable outbound endpoint "
+				"found\n");
+		}
+	}
+	if (ep_in == NULL) {
+		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+		return -ENODEV;
+	}
+
+	pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
+	if (!ir)
+		goto mem_alloc_fail;
+
+	ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+	if (!ir->buf_in)
+		goto buf_in_alloc_fail;
+
+	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ir->urb_in)
+		goto urb_in_alloc_fail;
+
+	ir->usbdev = dev;
+	ir->dev = &intf->dev;
+	ir->len_in = maxp;
+	ir->flags.microsoft_gen1 = is_microsoft_gen1;
+	ir->flags.tx_mask_normal = tx_mask_normal;
+	ir->flags.no_tx = mceusb_model[model].no_tx;
+	ir->model = model;
+
+	/* Saving usb interface data for use by the transmitter routine */
+	ir->usb_ep_in = ep_in;
+	ir->usb_ep_out = ep_out;
+
+	if (dev->descriptor.iManufacturer
+	    && usb_string(dev, dev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+	if (dev->descriptor.iProduct
+	    && usb_string(dev, dev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	ir->idev = mceusb_init_input_dev(ir);
+	if (!ir->idev)
+		goto input_dev_fail;
+
+	/* flush buffers on the device */
+	mce_sync_in(ir, NULL, maxp);
+	mce_sync_in(ir, NULL, maxp);
+
+	/* wire up inbound data handler */
+	usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+		maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
+	ir->urb_in->transfer_dma = ir->dma_in;
+	ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* initialize device */
+	if (ir->flags.microsoft_gen1)
+		mceusb_gen1_init(ir);
+	else if (!is_gen3)
+		mceusb_gen2_init(ir);
+
+	mceusb_get_parameters(ir);
+
+	if (!ir->flags.no_tx)
+		mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+
+	usb_set_intfdata(intf, ir);
+
+	dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
+		 dev->bus->busnum, dev->devnum);
+
+	return 0;
+
+	/* Error-handling path */
+input_dev_fail:
+	usb_free_urb(ir->urb_in);
+urb_in_alloc_fail:
+	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
+buf_in_alloc_fail:
+	kfree(ir);
+mem_alloc_fail:
+	dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
+
+	return -ENOMEM;
+}
+
+
+static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	if (!ir)
+		return;
+
+	ir->usbdev = NULL;
+	ir_input_unregister(ir->idev);
+	usb_kill_urb(ir->urb_in);
+	usb_free_urb(ir->urb_in);
+	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+	kfree(ir);
+}
+
+static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+	dev_info(ir->dev, "suspend\n");
+	usb_kill_urb(ir->urb_in);
+	return 0;
+}
+
+static int mceusb_dev_resume(struct usb_interface *intf)
+{
+	struct mceusb_dev *ir = usb_get_intfdata(intf);
+	dev_info(ir->dev, "resume\n");
+	if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
+		return -EIO;
+	return 0;
+}
+
+static struct usb_driver mceusb_dev_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	mceusb_dev_probe,
+	.disconnect =	mceusb_dev_disconnect,
+	.suspend =	mceusb_dev_suspend,
+	.resume =	mceusb_dev_resume,
+	.reset_resume =	mceusb_dev_resume,
+	.id_table =	mceusb_dev_table
+};
+
+static int __init mceusb_dev_init(void)
+{
+	int ret;
+
+	ret = usb_register(&mceusb_dev_driver);
+	if (ret < 0)
+		printk(KERN_ERR DRIVER_NAME
+		       ": usb register failed, result = %d\n", ret);
+
+	return ret;
+}
+
+static void __exit mceusb_dev_exit(void)
+{
+	usb_deregister(&mceusb_dev_driver);
+}
+
+module_init(mceusb_dev_init);
+module_exit(mceusb_dev_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
new file mode 100644
index 000000000000..acc729c79cec
--- /dev/null
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -0,0 +1,1252 @@
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <linux/pci_ids.h>
+
+#include "nuvoton-cir.h"
+
+static char *chip_id = "w836x7hg";
+
+/* write val to config reg */
+static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	outb(reg, nvt->cr_efir);
+	outb(val, nvt->cr_efdr);
+}
+
+/* read val from config reg */
+static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg)
+{
+	outb(reg, nvt->cr_efir);
+	return inb(nvt->cr_efdr);
+}
+
+/* update config register bit without changing other bits */
+static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	u8 tmp = nvt_cr_read(nvt, reg) | val;
+	nvt_cr_write(nvt, tmp, reg);
+}
+
+/* clear config register bit without changing other bits */
+static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+	u8 tmp = nvt_cr_read(nvt, reg) & ~val;
+	nvt_cr_write(nvt, tmp, reg);
+}
+
+/* enter extended function mode */
+static inline void nvt_efm_enable(struct nvt_dev *nvt)
+{
+	/* Enabling Extended Function Mode explicitly requires writing 2x */
+	outb(EFER_EFM_ENABLE, nvt->cr_efir);
+	outb(EFER_EFM_ENABLE, nvt->cr_efir);
+}
+
+/* exit extended function mode */
+static inline void nvt_efm_disable(struct nvt_dev *nvt)
+{
+	outb(EFER_EFM_DISABLE, nvt->cr_efir);
+}
+
+/*
+ * When you want to address a specific logical device, write its logical
+ * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
+ * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
+ */
+static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
+{
+	outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
+	outb(ldev, nvt->cr_efdr);
+}
+
+/* write val to cir config register */
+static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset)
+{
+	outb(val, nvt->cir_addr + offset);
+}
+
+/* read val from cir config register */
+static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+	u8 val;
+
+	val = inb(nvt->cir_addr + offset);
+
+	return val;
+}
+
+/* write val to cir wake register */
+static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt,
+					  u8 val, u8 offset)
+{
+	outb(val, nvt->cir_wake_addr + offset);
+}
+
+/* read val from cir wake config register */
+static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+	u8 val;
+
+	val = inb(nvt->cir_wake_addr + offset);
+
+	return val;
+}
+
+#define pr_reg(text, ...) \
+	printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+/* dump current cir register contents */
+static void cir_dump_regs(struct nvt_dev *nvt)
+{
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+
+	pr_reg("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME);
+	pr_reg(" * CR CIR ACTIVE :   0x%x\n",
+	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+	pr_reg(" * CR CIR BASE ADDR: 0x%x\n",
+	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+		nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+	pr_reg(" * CR CIR IRQ NUM:   0x%x\n",
+	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+	nvt_efm_disable(nvt);
+
+	pr_reg("%s: Dump CIR registers:\n", NVT_DRIVER_NAME);
+	pr_reg(" * IRCON:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON));
+	pr_reg(" * IRSTS:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS));
+	pr_reg(" * IREN:      0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN));
+	pr_reg(" * RXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT));
+	pr_reg(" * CP:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CP));
+	pr_reg(" * CC:        0x%x\n", nvt_cir_reg_read(nvt, CIR_CC));
+	pr_reg(" * SLCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH));
+	pr_reg(" * SLCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL));
+	pr_reg(" * FIFOCON:   0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON));
+	pr_reg(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS));
+	pr_reg(" * SRXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO));
+	pr_reg(" * TXFCONT:   0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT));
+	pr_reg(" * STXFIFO:   0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO));
+	pr_reg(" * FCCH:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH));
+	pr_reg(" * FCCL:      0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL));
+	pr_reg(" * IRFSM:     0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM));
+}
+
+/* dump current cir wake register contents */
+static void cir_wake_dump_regs(struct nvt_dev *nvt)
+{
+	u8 i, fifo_len;
+
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+
+	pr_reg("%s: Dump CIR WAKE logical device registers:\n",
+	       NVT_DRIVER_NAME);
+	pr_reg(" * CR CIR WAKE ACTIVE :   0x%x\n",
+	       nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+	pr_reg(" * CR CIR WAKE BASE ADDR: 0x%x\n",
+	       (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+		nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+	pr_reg(" * CR CIR WAKE IRQ NUM:   0x%x\n",
+	       nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+	nvt_efm_disable(nvt);
+
+	pr_reg("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME);
+	pr_reg(" * IRCON:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON));
+	pr_reg(" * IRSTS:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS));
+	pr_reg(" * IREN:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN));
+	pr_reg(" * FIFO CMP DEEP:  0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP));
+	pr_reg(" * FIFO CMP TOL:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL));
+	pr_reg(" * FIFO COUNT:     0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT));
+	pr_reg(" * SLCH:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH));
+	pr_reg(" * SLCL:           0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL));
+	pr_reg(" * FIFOCON:        0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON));
+	pr_reg(" * SRXFSTS:        0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS));
+	pr_reg(" * SAMPLE RX FIFO: 0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO));
+	pr_reg(" * WR FIFO DATA:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA));
+	pr_reg(" * RD FIFO ONLY:   0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+	pr_reg(" * RD FIFO ONLY IDX: 0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX));
+	pr_reg(" * FIFO IGNORE:    0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE));
+	pr_reg(" * IRFSM:          0x%x\n",
+	       nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM));
+
+	fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
+	pr_reg("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len);
+	pr_reg("* Contents = ");
+	for (i = 0; i < fifo_len; i++)
+		printk(KERN_CONT "%02x ",
+		       nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+	printk(KERN_CONT "\n");
+}
+
+/* detect hardware features */
+static int nvt_hw_detect(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	u8 chip_major, chip_minor;
+	int ret = 0;
+
+	nvt_efm_enable(nvt);
+
+	/* Check if we're wired for the alternate EFER setup */
+	chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+	if (chip_major == 0xff) {
+		nvt->cr_efir = CR_EFIR2;
+		nvt->cr_efdr = CR_EFDR2;
+		nvt_efm_enable(nvt);
+		chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+	}
+
+	chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
+	nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
+
+	if (chip_major != CHIP_ID_HIGH &&
+	    (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
+		ret = -ENODEV;
+
+	nvt_efm_disable(nvt);
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->chip_major = chip_major;
+	nvt->chip_minor = chip_minor;
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	return ret;
+}
+
+static void nvt_cir_ldev_init(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	/* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */
+	val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL);
+	val &= OUTPUT_PIN_SEL_MASK;
+	val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB);
+	nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL);
+
+	/* Select CIR logical device and enable */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
+	nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+	nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
+
+	nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
+		nvt->cir_addr, nvt->cir_irq);
+}
+
+static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
+{
+	/* Select ACPI logical device, enable it and CIR Wake */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	/* Enable CIR Wake via PSOUT# (Pin60) */
+	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+
+	/* enable cir interrupt of mouse/keyboard IRQ event */
+	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+
+	/* enable pme interrupt of cir wakeup event */
+	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+	/* Select CIR Wake logical device and enable */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
+	nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+	nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
+
+	nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
+		nvt->cir_wake_addr, nvt->cir_wake_irq);
+}
+
+/* clear out the hardware's cir rx fifo */
+static void nvt_clear_cir_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+}
+
+/* clear out the hardware's cir wake rx fifo */
+static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
+	nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
+			       CIR_WAKE_FIFOCON);
+}
+
+/* clear out the hardware's cir tx fifo */
+static void nvt_clear_tx_fifo(struct nvt_dev *nvt)
+{
+	u8 val;
+
+	val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+	nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON);
+}
+
+/* enable RX Trigger Level Reach and Packet End interrupts */
+static void nvt_set_cir_iren(struct nvt_dev *nvt)
+{
+	u8 iren;
+
+	iren = CIR_IREN_RTR | CIR_IREN_PE;
+	nvt_cir_reg_write(nvt, iren, CIR_IREN);
+}
+
+static void nvt_cir_regs_init(struct nvt_dev *nvt)
+{
+	/* set sample limit count (PE interrupt raised when reached) */
+	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
+	nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
+
+	/* set fifo irq trigger levels */
+	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV |
+			  CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON);
+
+	/*
+	 * Enable TX and RX, specify carrier on = low, off = high, and set
+	 * sample period (currently 50us)
+	 */
+	nvt_cir_reg_write(nvt,
+			  CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+			  CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+			  CIR_IRCON);
+
+	/* clear hardware rx and tx fifos */
+	nvt_clear_cir_fifo(nvt);
+	nvt_clear_tx_fifo(nvt);
+
+	/* clear any and all stray interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* and finally, enable interrupts */
+	nvt_set_cir_iren(nvt);
+}
+
+static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
+{
+	/* set number of bytes needed for wake key comparison (default 67) */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
+
+	/* set tolerance/variance allowed per byte during wake compare */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
+			       CIR_WAKE_FIFO_CMP_TOL);
+
+	/* set sample limit count (PE interrupt raised when reached) */
+	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
+	nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
+
+	/* set cir wake fifo rx trigger level (currently 67) */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
+			       CIR_WAKE_FIFOCON);
+
+	/*
+	 * Enable TX and RX, specific carrier on = low, off = high, and set
+	 * sample period (currently 50us)
+	 */
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
+			       CIR_WAKE_IRCON);
+
+	/* clear cir wake rx fifo */
+	nvt_clear_cir_wake_fifo(nvt);
+
+	/* clear any and all stray interrupts */
+	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+}
+
+static void nvt_enable_wake(struct nvt_dev *nvt)
+{
+	nvt_efm_enable(nvt);
+
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+	nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+	nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+	nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+			       CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+			       CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
+			       CIR_WAKE_IRCON);
+	nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+}
+
+/* rx carrier detect only works in learning mode, must be called w/nvt_lock */
+static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
+{
+	u32 count, carrier, duration = 0;
+	int i;
+
+	count = nvt_cir_reg_read(nvt, CIR_FCCL) |
+		nvt_cir_reg_read(nvt, CIR_FCCH) << 8;
+
+	for (i = 0; i < nvt->pkts; i++) {
+		if (nvt->buf[i] & BUF_PULSE_BIT)
+			duration += nvt->buf[i] & BUF_LEN_MASK;
+	}
+
+	duration *= SAMPLE_PERIOD;
+
+	if (!count || !duration) {
+		nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)",
+		       count, duration);
+		return 0;
+	}
+
+	carrier = (count * 1000000) / duration;
+
+	if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER))
+		nvt_dbg("WTF? Carrier frequency out of range!");
+
+	nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
+		carrier, count, duration);
+
+	return carrier;
+}
+
+/*
+ * set carrier frequency
+ *
+ * set carrier on 2 registers: CP & CC
+ * always set CP as 0x81
+ * set CC by SPEC, CC = 3MHz/carrier - 1
+ */
+static int nvt_set_tx_carrier(void *data, u32 carrier)
+{
+	struct nvt_dev *nvt = data;
+	u16 val;
+
+	nvt_cir_reg_write(nvt, 1, CIR_CP);
+	val = 3000000 / (carrier) - 1;
+	nvt_cir_reg_write(nvt, val & 0xff, CIR_CC);
+
+	nvt_dbg("cp: 0x%x cc: 0x%x\n",
+		nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC));
+
+	return 0;
+}
+
+/*
+ * nvt_tx_ir
+ *
+ * 1) clean TX fifo first (handled by AP)
+ * 2) copy data from user space
+ * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
+ * 4) send 9 packets to TX FIFO to open TTR
+ * in interrupt_handler:
+ * 5) send all data out
+ * go back to write():
+ * 6) disable TX interrupts, re-enable RX interupts
+ *
+ * The key problem of this function is user space data may larger than
+ * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
+ * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
+ * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
+ * set TXFCONT as 0xff, until buf_count less than 0xff.
+ */
+static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+{
+	struct nvt_dev *nvt = priv;
+	unsigned long flags;
+	size_t cur_count;
+	unsigned int i;
+	u8 iren;
+	int ret;
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+
+	if (n >= TX_BUF_LEN) {
+		nvt->tx.buf_count = cur_count = TX_BUF_LEN;
+		ret = TX_BUF_LEN;
+	} else {
+		nvt->tx.buf_count = cur_count = n;
+		ret = n;
+	}
+
+	memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
+
+	nvt->tx.cur_buf_num = 0;
+
+	/* save currently enabled interrupts */
+	iren = nvt_cir_reg_read(nvt, CIR_IREN);
+
+	/* now disable all interrupts, save TFU & TTR */
+	nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
+
+	nvt->tx.tx_state = ST_TX_REPLY;
+
+	nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
+			  CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+
+	/* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
+	for (i = 0; i < 9; i++)
+		nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
+
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	nvt->tx.tx_state = ST_TX_NONE;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	/* restore enabled interrupts to prior state */
+	nvt_cir_reg_write(nvt, iren, CIR_IREN);
+
+	return ret;
+}
+
+/* dump contents of the last rx buffer we got from the hw rx fifo */
+static void nvt_dump_rx_buf(struct nvt_dev *nvt)
+{
+	int i;
+
+	printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts);
+	for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++)
+		printk(KERN_CONT "0x%02x ", nvt->buf[i]);
+	printk(KERN_CONT "\n");
+}
+
+/*
+ * Process raw data in rx driver buffer, store it in raw IR event kfifo,
+ * trigger decode when appropriate.
+ *
+ * We get IR data samples one byte at a time. If the msb is set, its a pulse,
+ * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
+ * (default 50us) intervals for that pulse/space. A discrete signal is
+ * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
+ * to signal more IR coming (repeats) or end of IR, respectively. We store
+ * sample data in the raw event kfifo until we see 0x7<something> (except f)
+ * or 0x80, at which time, we trigger a decode operation.
+ */
+static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
+{
+	DEFINE_IR_RAW_EVENT(rawir);
+	unsigned int count;
+	u32 carrier;
+	u8 sample;
+	int i;
+
+	nvt_dbg_verbose("%s firing", __func__);
+
+	if (debug)
+		nvt_dump_rx_buf(nvt);
+
+	if (nvt->carrier_detect_enabled)
+		carrier = nvt_rx_carrier_detect(nvt);
+
+	count = nvt->pkts;
+	nvt_dbg_verbose("Processing buffer of len %d", count);
+
+	init_ir_raw_event(&rawir);
+
+	for (i = 0; i < count; i++) {
+		nvt->pkts--;
+		sample = nvt->buf[i];
+
+		rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
+		rawir.duration = (sample & BUF_LEN_MASK)
+					* SAMPLE_PERIOD * 1000;
+
+		if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
+			if (nvt->rawir.pulse == rawir.pulse)
+				nvt->rawir.duration += rawir.duration;
+			else {
+				nvt->rawir.duration = rawir.duration;
+				nvt->rawir.pulse = rawir.pulse;
+			}
+			continue;
+		}
+
+		rawir.duration += nvt->rawir.duration;
+
+		init_ir_raw_event(&nvt->rawir);
+		nvt->rawir.duration = 0;
+		nvt->rawir.pulse = rawir.pulse;
+
+		if (sample == BUF_PULSE_BIT)
+			rawir.pulse = false;
+
+		if (rawir.duration) {
+			nvt_dbg("Storing %s with duration %d",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+
+			ir_raw_event_store(nvt->rdev, &rawir);
+		}
+
+		/*
+		 * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
+		 * indicates end of IR signal, but new data incoming. In both
+		 * cases, it means we're ready to call ir_raw_event_handle
+		 */
+		if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
+			nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
+			ir_raw_event_handle(nvt->rdev);
+		}
+	}
+
+	nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
+	ir_raw_event_handle(nvt->rdev);
+
+	if (nvt->pkts) {
+		nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
+		nvt->pkts = 0;
+	}
+
+	nvt_dbg_verbose("%s done", __func__);
+}
+
+static void nvt_handle_rx_fifo_overrun(struct nvt_dev *nvt)
+{
+	nvt_pr(KERN_WARNING, "RX FIFO overrun detected, flushing data!");
+
+	nvt->pkts = 0;
+	nvt_clear_cir_fifo(nvt);
+	ir_raw_event_reset(nvt->rdev);
+}
+
+/* copy data from hardware rx fifo into driver buffer */
+static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	u8 fifocount, val;
+	unsigned int b_idx;
+	bool overrun = false;
+	int i;
+
+	/* Get count of how many bytes to read from RX FIFO */
+	fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT);
+	/* if we get 0xff, probably means the logical dev is disabled */
+	if (fifocount == 0xff)
+		return;
+	/* watch out for a fifo overrun condition */
+	else if (fifocount > RX_BUF_LEN) {
+		overrun = true;
+		fifocount = RX_BUF_LEN;
+	}
+
+	nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+	b_idx = nvt->pkts;
+
+	/* This should never happen, but lets check anyway... */
+	if (b_idx + fifocount > RX_BUF_LEN) {
+		nvt_process_rx_ir_data(nvt);
+		b_idx = 0;
+	}
+
+	/* Read fifocount bytes from CIR Sample RX FIFO register */
+	for (i = 0; i < fifocount; i++) {
+		val = nvt_cir_reg_read(nvt, CIR_SRXFIFO);
+		nvt->buf[b_idx + i] = val;
+	}
+
+	nvt->pkts += fifocount;
+	nvt_dbg("%s: pkts now %d", __func__, nvt->pkts);
+
+	nvt_process_rx_ir_data(nvt);
+
+	if (overrun)
+		nvt_handle_rx_fifo_overrun(nvt);
+
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+static void nvt_cir_log_irqs(u8 status, u8 iren)
+{
+	nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
+		status, iren,
+		status & CIR_IRSTS_RDR	? " RDR"	: "",
+		status & CIR_IRSTS_RTR	? " RTR"	: "",
+		status & CIR_IRSTS_PE	? " PE"		: "",
+		status & CIR_IRSTS_RFO	? " RFO"	: "",
+		status & CIR_IRSTS_TE	? " TE"		: "",
+		status & CIR_IRSTS_TTR	? " TTR"	: "",
+		status & CIR_IRSTS_TFU	? " TFU"	: "",
+		status & CIR_IRSTS_GH	? " GH"		: "",
+		status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE |
+			   CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR |
+			   CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
+}
+
+static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
+{
+	unsigned long flags;
+	bool tx_inactive;
+	u8 tx_state;
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	tx_state = nvt->tx.tx_state;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	tx_inactive = (tx_state == ST_TX_NONE);
+
+	return tx_inactive;
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t nvt_cir_isr(int irq, void *data)
+{
+	struct nvt_dev *nvt = data;
+	u8 status, iren, cur_state;
+	unsigned long flags;
+
+	nvt_dbg_verbose("%s firing", __func__);
+
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_efm_disable(nvt);
+
+	/*
+	 * Get IR Status register contents. Write 1 to ack/clear
+	 *
+	 * bit: reg name      - description
+	 *   7: CIR_IRSTS_RDR - RX Data Ready
+	 *   6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
+	 *   5: CIR_IRSTS_PE  - Packet End
+	 *   4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
+	 *   3: CIR_IRSTS_TE  - TX FIFO Empty
+	 *   2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
+	 *   1: CIR_IRSTS_TFU - TX FIFO Underrun
+	 *   0: CIR_IRSTS_GH  - Min Length Detected
+	 */
+	status = nvt_cir_reg_read(nvt, CIR_IRSTS);
+	if (!status) {
+		nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
+		nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	/* ack/clear all irq flags we've got */
+	nvt_cir_reg_write(nvt, status, CIR_IRSTS);
+	nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
+
+	/* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
+	iren = nvt_cir_reg_read(nvt, CIR_IREN);
+	if (!iren) {
+		nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	if (debug)
+		nvt_cir_log_irqs(status, iren);
+
+	if (status & CIR_IRSTS_RTR) {
+		/* FIXME: add code for study/learn mode */
+		/* We only do rx if not tx'ing */
+		if (nvt_cir_tx_inactive(nvt))
+			nvt_get_rx_ir_data(nvt);
+	}
+
+	if (status & CIR_IRSTS_PE) {
+		if (nvt_cir_tx_inactive(nvt))
+			nvt_get_rx_ir_data(nvt);
+
+		spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+		cur_state = nvt->study_state;
+
+		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+		if (cur_state == ST_STUDY_NONE)
+			nvt_clear_cir_fifo(nvt);
+	}
+
+	if (status & CIR_IRSTS_TE)
+		nvt_clear_tx_fifo(nvt);
+
+	if (status & CIR_IRSTS_TTR) {
+		unsigned int pos, count;
+		u8 tmp;
+
+		spin_lock_irqsave(&nvt->tx.lock, flags);
+
+		pos = nvt->tx.cur_buf_num;
+		count = nvt->tx.buf_count;
+
+		/* Write data into the hardware tx fifo while pos < count */
+		if (pos < count) {
+			nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
+			nvt->tx.cur_buf_num++;
+		/* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
+		} else {
+			tmp = nvt_cir_reg_read(nvt, CIR_IREN);
+			nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
+		}
+
+		spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	}
+
+	if (status & CIR_IRSTS_TFU) {
+		spin_lock_irqsave(&nvt->tx.lock, flags);
+		if (nvt->tx.tx_state == ST_TX_REPLY) {
+			nvt->tx.tx_state = ST_TX_REQUEST;
+			wake_up(&nvt->tx.queue);
+		}
+		spin_unlock_irqrestore(&nvt->tx.lock, flags);
+	}
+
+	nvt_dbg_verbose("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+/* Interrupt service routine for CIR Wake */
+static irqreturn_t nvt_cir_wake_isr(int irq, void *data)
+{
+	u8 status, iren, val;
+	struct nvt_dev *nvt = data;
+	unsigned long flags;
+
+	nvt_dbg_wake("%s firing", __func__);
+
+	status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
+	if (!status)
+		return IRQ_RETVAL(IRQ_NONE);
+
+	if (status & CIR_WAKE_IRSTS_IR_PENDING)
+		nvt_clear_cir_wake_fifo(nvt);
+
+	nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
+	nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
+
+	/* Interrupt may be shared with CIR, bail if Wake not enabled */
+	iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
+	if (!iren) {
+		nvt_dbg_wake("%s exiting, wake not enabled", __func__);
+		return IRQ_RETVAL(IRQ_HANDLED);
+	}
+
+	if ((status & CIR_WAKE_IRSTS_PE) &&
+	    (nvt->wake_state == ST_WAKE_START)) {
+		while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
+			val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
+			nvt_dbg("setting wake up key: 0x%x", val);
+		}
+
+		nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+		spin_lock_irqsave(&nvt->nvt_lock, flags);
+		nvt->wake_state = ST_WAKE_FINISH;
+		spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+	}
+
+	nvt_dbg_wake("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+static void nvt_enable_cir(struct nvt_dev *nvt)
+{
+	/* set function enable flags */
+	nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+			  CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+			  CIR_IRCON);
+
+	nvt_efm_enable(nvt);
+
+	/* enable the CIR logical device */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	/* clear all pending interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* enable interrupts */
+	nvt_set_cir_iren(nvt);
+}
+
+static void nvt_disable_cir(struct nvt_dev *nvt)
+{
+	/* disable CIR interrupts */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+	/* clear any and all pending interrupts */
+	nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+	/* clear all function enable flags */
+	nvt_cir_reg_write(nvt, 0, CIR_IRCON);
+
+	/* clear hardware rx and tx fifos */
+	nvt_clear_cir_fifo(nvt);
+	nvt_clear_tx_fifo(nvt);
+
+	nvt_efm_enable(nvt);
+
+	/* disable the CIR logical device */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+}
+
+static int nvt_open(void *data)
+{
+	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->in_use = true;
+	nvt_enable_cir(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	return 0;
+}
+
+static void nvt_close(void *data)
+{
+	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->in_use = false;
+	nvt_disable_cir(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+/* Allocate memory, probe hardware, and initialize everything */
+static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
+{
+	struct nvt_dev *nvt = NULL;
+	struct input_dev *rdev = NULL;
+	struct ir_dev_props *props = NULL;
+	int ret = -ENOMEM;
+
+	nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
+	if (!nvt)
+		return ret;
+
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props)
+		goto failure;
+
+	/* input device for IR remote (and tx) */
+	rdev = input_allocate_device();
+	if (!rdev)
+		goto failure;
+
+	ret = -ENODEV;
+	/* validate pnp resources */
+	if (!pnp_port_valid(pdev, 0) ||
+	    pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) {
+		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_irq_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "PNP IRQ not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_port_valid(pdev, 1) ||
+	    pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) {
+		dev_err(&pdev->dev, "Wake PNP Port not valid!\n");
+		goto failure;
+	}
+
+	nvt->cir_addr = pnp_port_start(pdev, 0);
+	nvt->cir_irq  = pnp_irq(pdev, 0);
+
+	nvt->cir_wake_addr = pnp_port_start(pdev, 1);
+	/* irq is always shared between cir and cir wake */
+	nvt->cir_wake_irq  = nvt->cir_irq;
+
+	nvt->cr_efir = CR_EFIR;
+	nvt->cr_efdr = CR_EFDR;
+
+	spin_lock_init(&nvt->nvt_lock);
+	spin_lock_init(&nvt->tx.lock);
+	init_ir_raw_event(&nvt->rawir);
+
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(nvt->cir_addr,
+			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED,
+			NVT_DRIVER_NAME, (void *)nvt))
+		goto failure;
+
+	if (!request_region(nvt->cir_wake_addr,
+			    CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED,
+			NVT_DRIVER_NAME, (void *)nvt))
+		goto failure;
+
+	pnp_set_drvdata(pdev, nvt);
+	nvt->pdev = pdev;
+
+	init_waitqueue_head(&nvt->tx.queue);
+
+	ret = nvt_hw_detect(nvt);
+	if (ret)
+		goto failure;
+
+	/* Initialize CIR & CIR Wake Logical Devices */
+	nvt_efm_enable(nvt);
+	nvt_cir_ldev_init(nvt);
+	nvt_cir_wake_ldev_init(nvt);
+	nvt_efm_disable(nvt);
+
+	/* Initialize CIR & CIR Wake Config Registers */
+	nvt_cir_regs_init(nvt);
+	nvt_cir_wake_regs_init(nvt);
+
+	/* Set up ir-core props */
+	props->priv = nvt;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	props->allowed_protos = IR_TYPE_ALL;
+	props->open = nvt_open;
+	props->close = nvt_close;
+#if 0
+	props->min_timeout = XYZ;
+	props->max_timeout = XYZ;
+	props->timeout = XYZ;
+	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+	props->rx_resolution = XYZ;
+
+	/* tx bits */
+	props->tx_resolution = XYZ;
+#endif
+	props->tx_ir = nvt_tx_ir;
+	props->s_tx_carrier = nvt_set_tx_carrier;
+
+	rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+	rdev->id.bustype = BUS_HOST;
+	rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
+	rdev->id.product = nvt->chip_major;
+	rdev->id.version = nvt->chip_minor;
+
+	nvt->props = props;
+	nvt->rdev = rdev;
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+	device_set_wakeup_enable(&pdev->dev, 1);
+
+	ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+	if (ret)
+		goto failure;
+
+	nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+	if (debug) {
+		cir_dump_regs(nvt);
+		cir_wake_dump_regs(nvt);
+	}
+
+	return 0;
+
+failure:
+	if (nvt->cir_irq)
+		free_irq(nvt->cir_irq, nvt);
+	if (nvt->cir_addr)
+		release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+
+	if (nvt->cir_wake_irq)
+		free_irq(nvt->cir_wake_irq, nvt);
+	if (nvt->cir_wake_addr)
+		release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+	input_free_device(rdev);
+	kfree(props);
+	kfree(nvt);
+
+	return ret;
+}
+
+static void __devexit nvt_remove(struct pnp_dev *pdev)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	/* disable CIR */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+	nvt_disable_cir(nvt);
+	/* enable CIR Wake (for IR power-on) */
+	nvt_enable_wake(nvt);
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	/* free resources */
+	free_irq(nvt->cir_irq, nvt);
+	free_irq(nvt->cir_wake_irq, nvt);
+	release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+	release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+	ir_input_unregister(nvt->rdev);
+
+	kfree(nvt->props);
+	kfree(nvt);
+}
+
+static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	nvt_dbg("%s called", __func__);
+
+	/* zero out misc state tracking */
+	spin_lock_irqsave(&nvt->nvt_lock, flags);
+	nvt->study_state = ST_STUDY_NONE;
+	nvt->wake_state = ST_WAKE_NONE;
+	spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+	spin_lock_irqsave(&nvt->tx.lock, flags);
+	nvt->tx.tx_state = ST_TX_NONE;
+	spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+	/* disable all CIR interrupts */
+	nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+	nvt_efm_enable(nvt);
+
+	/* disable cir logical dev */
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	/* make sure wake is enabled */
+	nvt_enable_wake(nvt);
+
+	return 0;
+}
+
+static int nvt_resume(struct pnp_dev *pdev)
+{
+	int ret = 0;
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+
+	nvt_dbg("%s called", __func__);
+
+	/* open interrupt */
+	nvt_set_cir_iren(nvt);
+
+	/* Enable CIR logical device */
+	nvt_efm_enable(nvt);
+	nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+	nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+	nvt_efm_disable(nvt);
+
+	nvt_cir_regs_init(nvt);
+	nvt_cir_wake_regs_init(nvt);
+
+	return ret;
+}
+
+static void nvt_shutdown(struct pnp_dev *pdev)
+{
+	struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+	nvt_enable_wake(nvt);
+}
+
+static const struct pnp_device_id nvt_ids[] = {
+	{ "WEC0530", 0 },   /* CIR */
+	{ "NTN0530", 0 },   /* CIR for new chip's pnp id*/
+	{ "", 0 },
+};
+
+static struct pnp_driver nvt_driver = {
+	.name		= NVT_DRIVER_NAME,
+	.id_table	= nvt_ids,
+	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
+	.probe		= nvt_probe,
+	.remove		= __devexit_p(nvt_remove),
+	.suspend	= nvt_suspend,
+	.resume		= nvt_resume,
+	.shutdown	= nvt_shutdown,
+};
+
+int nvt_init(void)
+{
+	return pnp_register_driver(&nvt_driver);
+}
+
+void nvt_exit(void)
+{
+	pnp_unregister_driver(&nvt_driver);
+}
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+MODULE_DEVICE_TABLE(pnp, nvt_ids);
+MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
+
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(nvt_init);
+module_exit(nvt_exit);
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
new file mode 100644
index 000000000000..62dc53017c8e
--- /dev/null
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -0,0 +1,408 @@
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+
+/* platform driver name to register */
+#define NVT_DRIVER_NAME "nuvoton-cir"
+
+/* debugging module parameter */
+static int debug;
+
+
+#define nvt_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define nvt_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_wake(text, ...) \
+	if (debug > 2) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+/*
+ * Original lirc driver said min value of 76, and recommended value of 256
+ * for the buffer length, but then used 2048. Never mind that the size of the
+ * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
+ * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
+ * and I don't have TX-capable hardware to test/debug on...
+ */
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct nvt_dev {
+	struct pnp_dev *pdev;
+	struct input_dev *rdev;
+	struct ir_dev_props *props;
+	struct ir_raw_event rawir;
+
+	spinlock_t nvt_lock;
+	bool in_use;
+
+	/* for rx */
+	u8 buf[RX_BUF_LEN];
+	unsigned int pkts;
+
+	struct {
+		spinlock_t lock;
+		u8 buf[TX_BUF_LEN];
+		unsigned int buf_count;
+		unsigned int cur_buf_num;
+		wait_queue_head_t queue;
+		u8 tx_state;
+	} tx;
+
+	/* EFER Config register index/data pair */
+	u8 cr_efir;
+	u8 cr_efdr;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	unsigned long cir_wake_addr;
+	int cir_irq;
+	int cir_wake_irq;
+
+	/* hardware id */
+	u8 chip_major;
+	u8 chip_minor;
+
+	/* hardware features */
+	bool hw_learning_capable;
+	bool hw_tx_capable;
+
+	/* rx settings */
+	bool learning_enabled;
+	bool carrier_detect_enabled;
+
+	/* track cir wake state */
+	u8 wake_state;
+	/* for study */
+	u8 study_state;
+	/* carrier period = 1 / frequency */
+	u32 carrier;
+};
+
+/* study states */
+#define ST_STUDY_NONE      0x0
+#define ST_STUDY_START     0x1
+#define ST_STUDY_CARRIER   0x2
+#define ST_STUDY_ALL_RECV  0x4
+
+/* wake states */
+#define ST_WAKE_NONE	0x0
+#define ST_WAKE_START	0x1
+#define ST_WAKE_FINISH	0x2
+
+/* receive states */
+#define ST_RX_WAIT_7F		0x1
+#define ST_RX_WAIT_HEAD		0x2
+#define ST_RX_WAIT_SILENT_END	0x4
+
+/* send states */
+#define ST_TX_NONE	0x0
+#define ST_TX_REQUEST	0x2
+#define ST_TX_REPLY	0x4
+
+/* buffer packet constants */
+#define BUF_PULSE_BIT	0x80
+#define BUF_LEN_MASK	0x7f
+#define BUF_REPEAT_BYTE	0x70
+#define BUF_REPEAT_MASK	0xf0
+
+/* CIR settings */
+
+/* total length of CIR and CIR WAKE */
+#define CIR_IOREG_LENGTH	0x0f
+
+/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
+#define CIR_RX_LIMIT_COUNT	0x7d0
+
+/* CIR Regs */
+#define CIR_IRCON	0x00
+#define CIR_IRSTS	0x01
+#define CIR_IREN	0x02
+#define CIR_RXFCONT	0x03
+#define CIR_CP		0x04
+#define CIR_CC		0x05
+#define CIR_SLCH	0x06
+#define CIR_SLCL	0x07
+#define CIR_FIFOCON	0x08
+#define CIR_IRFIFOSTS	0x09
+#define CIR_SRXFIFO	0x0a
+#define CIR_TXFCONT	0x0b
+#define CIR_STXFIFO	0x0c
+#define CIR_FCCH	0x0d
+#define CIR_FCCL	0x0e
+#define CIR_IRFSM	0x0f
+
+/* CIR IRCON settings */
+#define CIR_IRCON_RECV	 0x80
+#define CIR_IRCON_WIREN	 0x40
+#define CIR_IRCON_TXEN	 0x20
+#define CIR_IRCON_RXEN	 0x10
+#define CIR_IRCON_WRXINV 0x08
+#define CIR_IRCON_RXINV	 0x04
+
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_1	0x00
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_25	0x01
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_50	0x02
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_100	0x03
+
+/* FIXME: make this a runtime option */
+/* select sample period as 50us */
+#define CIR_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR IRSTS settings */
+#define CIR_IRSTS_RDR	0x80
+#define CIR_IRSTS_RTR	0x40
+#define CIR_IRSTS_PE	0x20
+#define CIR_IRSTS_RFO	0x10
+#define CIR_IRSTS_TE	0x08
+#define CIR_IRSTS_TTR	0x04
+#define CIR_IRSTS_TFU	0x02
+#define CIR_IRSTS_GH	0x01
+
+/* CIR IREN settings */
+#define CIR_IREN_RDR	0x80
+#define CIR_IREN_RTR	0x40
+#define CIR_IREN_PE	0x20
+#define CIR_IREN_RFO	0x10
+#define CIR_IREN_TE	0x08
+#define CIR_IREN_TTR	0x04
+#define CIR_IREN_TFU	0x02
+#define CIR_IREN_GH	0x01
+
+/* CIR FIFOCON settings */
+#define CIR_FIFOCON_TXFIFOCLR		0x80
+
+#define CIR_FIFOCON_TX_TRIGGER_LEV_31	0x00
+#define CIR_FIFOCON_TX_TRIGGER_LEV_24	0x10
+#define CIR_FIFOCON_TX_TRIGGER_LEV_16	0x20
+#define CIR_FIFOCON_TX_TRIGGER_LEV_8	0x30
+
+/* FIXME: make this a runtime option */
+/* select TX trigger level as 16 */
+#define CIR_FIFOCON_TX_TRIGGER_LEV	CIR_FIFOCON_TX_TRIGGER_LEV_16
+
+#define CIR_FIFOCON_RXFIFOCLR		0x08
+
+#define CIR_FIFOCON_RX_TRIGGER_LEV_1	0x00
+#define CIR_FIFOCON_RX_TRIGGER_LEV_8	0x01
+#define CIR_FIFOCON_RX_TRIGGER_LEV_16	0x02
+#define CIR_FIFOCON_RX_TRIGGER_LEV_24	0x03
+
+/* FIXME: make this a runtime option */
+/* select RX trigger level as 24 */
+#define CIR_FIFOCON_RX_TRIGGER_LEV	CIR_FIFOCON_RX_TRIGGER_LEV_24
+
+/* CIR IRFIFOSTS settings */
+#define CIR_IRFIFOSTS_IR_PENDING	0x80
+#define CIR_IRFIFOSTS_RX_GS		0x40
+#define CIR_IRFIFOSTS_RX_FTA		0x20
+#define CIR_IRFIFOSTS_RX_EMPTY		0x10
+#define CIR_IRFIFOSTS_RX_FULL		0x08
+#define CIR_IRFIFOSTS_TX_FTA		0x04
+#define CIR_IRFIFOSTS_TX_EMPTY		0x02
+#define CIR_IRFIFOSTS_TX_FULL		0x01
+
+
+/* CIR WAKE UP Regs */
+#define CIR_WAKE_IRCON			0x00
+#define CIR_WAKE_IRSTS			0x01
+#define CIR_WAKE_IREN			0x02
+#define CIR_WAKE_FIFO_CMP_DEEP		0x03
+#define CIR_WAKE_FIFO_CMP_TOL		0x04
+#define CIR_WAKE_FIFO_COUNT		0x05
+#define CIR_WAKE_SLCH			0x06
+#define CIR_WAKE_SLCL			0x07
+#define CIR_WAKE_FIFOCON		0x08
+#define CIR_WAKE_SRXFSTS		0x09
+#define CIR_WAKE_SAMPLE_RX_FIFO		0x0a
+#define CIR_WAKE_WR_FIFO_DATA		0x0b
+#define CIR_WAKE_RD_FIFO_ONLY		0x0c
+#define CIR_WAKE_RD_FIFO_ONLY_IDX	0x0d
+#define CIR_WAKE_FIFO_IGNORE		0x0e
+#define CIR_WAKE_IRFSM			0x0f
+
+/* CIR WAKE UP IRCON settings */
+#define CIR_WAKE_IRCON_DEC_RST		0x80
+#define CIR_WAKE_IRCON_MODE1		0x40
+#define CIR_WAKE_IRCON_MODE0		0x20
+#define CIR_WAKE_IRCON_RXEN		0x10
+#define CIR_WAKE_IRCON_R		0x08
+#define CIR_WAKE_IRCON_RXINV		0x04
+
+/* FIXME/jarod: make this a runtime option */
+/* select a same sample period like cir register */
+#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR WAKE IRSTS Bits */
+#define CIR_WAKE_IRSTS_RDR		0x80
+#define CIR_WAKE_IRSTS_RTR		0x40
+#define CIR_WAKE_IRSTS_PE		0x20
+#define CIR_WAKE_IRSTS_RFO		0x10
+#define CIR_WAKE_IRSTS_GH		0x08
+#define CIR_WAKE_IRSTS_IR_PENDING	0x01
+
+/* CIR WAKE UP IREN Bits */
+#define CIR_WAKE_IREN_RDR		0x80
+#define CIR_WAKE_IREN_RTR		0x40
+#define CIR_WAKE_IREN_PE		0x20
+#define CIR_WAKE_IREN_RFO		0x10
+#define CIR_WAKE_IREN_TE		0x08
+#define CIR_WAKE_IREN_TTR		0x04
+#define CIR_WAKE_IREN_TFU		0x02
+#define CIR_WAKE_IREN_GH		0x01
+
+/* CIR WAKE FIFOCON settings */
+#define CIR_WAKE_FIFOCON_RXFIFOCLR	0x08
+
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67	0x00
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66	0x01
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65	0x02
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64	0x03
+
+/* FIXME: make this a runtime option */
+/* select WAKE UP RX trigger level as 67 */
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV	CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
+
+/* CIR WAKE SRXFSTS settings */
+#define CIR_WAKE_IRFIFOSTS_RX_GS	0x80
+#define CIR_WAKE_IRFIFOSTS_RX_FTA	0x40
+#define CIR_WAKE_IRFIFOSTS_RX_EMPTY	0x20
+#define CIR_WAKE_IRFIFOSTS_RX_FULL	0x10
+
+/* CIR Wake FIFO buffer is 67 bytes long */
+#define CIR_WAKE_FIFO_LEN		67
+/* CIR Wake byte comparison tolerance */
+#define CIR_WAKE_CMP_TOLERANCE		5
+
+/*
+ * Extended Function Enable Registers:
+ *  Extended Function Index Register
+ *  Extended Function Data Register
+ */
+#define CR_EFIR			0x2e
+#define CR_EFDR			0x2f
+
+/* Possible alternate EFER values, depends on how the chip is wired */
+#define CR_EFIR2		0x4e
+#define CR_EFDR2		0x4f
+
+/* Extended Function Mode enable/disable magic values */
+#define EFER_EFM_ENABLE		0x87
+#define EFER_EFM_DISABLE	0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH		0xb4
+#define CHIP_ID_LOW		0x72
+#define CHIP_ID_LOW2		0x73
+
+/* Config regs we need to care about */
+#define CR_SOFTWARE_RESET	0x02
+#define CR_LOGICAL_DEV_SEL	0x07
+#define CR_CHIP_ID_HI		0x20
+#define CR_CHIP_ID_LO		0x21
+#define CR_DEV_POWER_DOWN	0x22 /* bit 2 is CIR power, default power on */
+#define CR_OUTPUT_PIN_SEL	0x27
+#define CR_LOGICAL_DEV_EN	0x30 /* valid for all logical devices */
+/* next three regs valid for both the CIR and CIR_WAKE logical devices */
+#define CR_CIR_BASE_ADDR_HI	0x60
+#define CR_CIR_BASE_ADDR_LO	0x61
+#define CR_CIR_IRQ_RSRC		0x70
+/* next three regs valid only for ACPI logical dev */
+#define CR_ACPI_CIR_WAKE	0xe0
+#define CR_ACPI_IRQ_EVENTS	0xf6
+#define CR_ACPI_IRQ_EVENTS2	0xf7
+
+/* Logical devices that we need to care about */
+#define LOGICAL_DEV_LPT		0x01
+#define LOGICAL_DEV_CIR		0x06
+#define LOGICAL_DEV_ACPI	0x0a
+#define LOGICAL_DEV_CIR_WAKE	0x0e
+
+#define LOGICAL_DEV_DISABLE	0x00
+#define LOGICAL_DEV_ENABLE	0x01
+
+#define CIR_WAKE_ENABLE_BIT	0x08
+#define CIR_INTR_MOUSE_IRQ_BIT	0x80
+#define PME_INTR_CIR_PASS_BIT	0x08
+
+#define OUTPUT_PIN_SEL_MASK	0xbc
+#define OUTPUT_ENABLE_CIR	0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
+#define OUTPUT_ENABLE_CIRWB	0x40 /* enable wide-band sensor */
+
+/* MCE CIR signal length, related on sample period */
+
+/* MCE CIR controller signal length: about 43ms
+ * 43ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define CONTROLLER_BUF_LEN_MIN 830
+
+/* MCE CIR keyboard signal length: about 26ms
+ * 26ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define KEYBOARD_BUF_LEN_MAX 650
+#define KEYBOARD_BUF_LEN_MIN 610
+
+/* MCE CIR mouse signal length: about 24ms
+ * 24ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define MOUSE_BUF_LEN_MIN 565
+
+#define CIR_SAMPLE_PERIOD 50
+#define CIR_SAMPLE_LOW_INACCURACY 0.85
+
+/* MAX silence time that driver will sent to lirc */
+#define MAX_SILENCE_TIME 60000
+
+#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
+#define SAMPLE_PERIOD 100
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
+#define SAMPLE_PERIOD 50
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
+#define SAMPLE_PERIOD 25
+
+#else
+#define SAMPLE_PERIOD 1
+#endif
+
+/* as VISTA MCE definition, valid carrier value */
+#define MAX_CARRIER 60000
+#define MIN_CARRIER 30000
diff --git a/drivers/media/rc/rc-map.c b/drivers/media/rc/rc-map.c
new file mode 100644
index 000000000000..689143f2fff0
--- /dev/null
+++ b/drivers/media/rc/rc-map.c
@@ -0,0 +1,107 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <media/ir-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+/* Used to handle IR raw handler extensions */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+static struct rc_keymap *seek_rc_map(const char *name)
+{
+	struct rc_keymap *map = NULL;
+
+	spin_lock(&rc_map_lock);
+	list_for_each_entry(map, &rc_map_list, list) {
+		if (!strcmp(name, map->map.name)) {
+			spin_unlock(&rc_map_lock);
+			return map;
+		}
+	}
+	spin_unlock(&rc_map_lock);
+
+	return NULL;
+}
+
+struct ir_scancode_table *get_rc_map(const char *name)
+{
+
+	struct rc_keymap *map;
+
+	map = seek_rc_map(name);
+#ifdef MODULE
+	if (!map) {
+		int rc = request_module(name);
+		if (rc < 0) {
+			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+			return NULL;
+		}
+		msleep(20);	/* Give some time for IR to register */
+
+		map = seek_rc_map(name);
+	}
+#endif
+	if (!map) {
+		printk(KERN_ERR "IR keymap %s not found\n", name);
+		return NULL;
+	}
+
+	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+	return &map->map;
+}
+EXPORT_SYMBOL_GPL(get_rc_map);
+
+int ir_register_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_add_tail(&map->list, &rc_map_list);
+	spin_unlock(&rc_map_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_register_map);
+
+void ir_unregister_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_del(&map->list);
+	spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+
+static struct ir_scancode empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+int ir_rcmap_init(void)
+{
+	return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+	ir_unregister_map(&empty_map);
+}
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
new file mode 100644
index 000000000000..3a20aef67d08
--- /dev/null
+++ b/drivers/media/rc/streamzap.c
@@ -0,0 +1,572 @@
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION	"1.61"
+#define DRIVER_NAME	"streamzap"
+#define DRIVER_DESC	"Streamzap Remote Control driver"
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define USB_STREAMZAP_VENDOR_ID		0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID	0x0000
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+	/* Streamzap Remote Control */
+	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+	/* Terminating entry */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define SZ_PULSE_MASK 0xf0
+#define SZ_SPACE_MASK 0x0f
+#define SZ_TIMEOUT    0xff
+#define SZ_RESOLUTION 256
+
+/* number of samples buffered */
+#define SZ_BUF_LEN 128
+
+/* from ir-rc5-sz-decoder.c */
+#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
+#define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
+#else
+#define load_rc5_sz_decode()    0
+#endif
+
+enum StreamzapDecoderState {
+	PulseSpace,
+	FullPulse,
+	FullSpace,
+	IgnorePulse
+};
+
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+	/* ir-core */
+	struct ir_dev_props *props;
+
+	/* core device info */
+	struct device *dev;
+	struct input_dev *idev;
+
+	/* usb */
+	struct usb_device	*usbdev;
+	struct usb_interface	*interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct urb		*urb_in;
+
+	/* buffer & dma */
+	unsigned char		*buf_in;
+	dma_addr_t		dma_in;
+	unsigned int		buf_in_len;
+
+	/* track what state we're in */
+	enum StreamzapDecoderState decoder_state;
+	/* tracks whether we are currently receiving some signal */
+	bool			idle;
+	/* sum of signal lengths received since signal start */
+	unsigned long		sum;
+	/* start time of signal; necessary for gap tracking */
+	struct timeval		signal_last;
+	struct timeval		signal_start;
+	bool			timeout_enabled;
+
+	char			name[128];
+	char			phys[64];
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void streamzap_callback(struct urb *urb);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver streamzap_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	streamzap_probe,
+	.disconnect =	streamzap_disconnect,
+	.suspend =	streamzap_suspend,
+	.resume =	streamzap_resume,
+	.id_table =	streamzap_table,
+};
+
+static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
+{
+	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
+		(rawir.pulse ? "pulse" : "space"), rawir.duration);
+	ir_raw_event_store_with_filter(sz->idev, &rawir);
+}
+
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	if (sz->idle) {
+		long deltv;
+
+		sz->signal_last = sz->signal_start;
+		do_gettimeofday(&sz->signal_start);
+
+		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+		rawir.pulse = false;
+		if (deltv > 15) {
+			/* really long time */
+			rawir.duration = IR_MAX_DURATION;
+		} else {
+			rawir.duration = (int)(deltv * 1000000 +
+				sz->signal_start.tv_usec -
+				sz->signal_last.tv_usec);
+			rawir.duration -= sz->sum;
+			rawir.duration *= 1000;
+			rawir.duration &= IR_MAX_DURATION;
+		}
+		sz_push(sz, rawir);
+
+		sz->idle = false;
+		sz->sum = 0;
+	}
+
+	rawir.pulse = true;
+	rawir.duration = ((int) value) * SZ_RESOLUTION;
+	rawir.duration += SZ_RESOLUTION / 2;
+	sz->sum += rawir.duration;
+	rawir.duration *= 1000;
+	rawir.duration &= IR_MAX_DURATION;
+	sz_push(sz, rawir);
+}
+
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
+}
+
+static void sz_push_full_space(struct streamzap_ir *sz,
+			       unsigned char value)
+{
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	rawir.pulse = false;
+	rawir.duration = ((int) value) * SZ_RESOLUTION;
+	rawir.duration += SZ_RESOLUTION / 2;
+	sz->sum += rawir.duration;
+	rawir.duration *= 1000;
+	sz_push(sz, rawir);
+}
+
+static void sz_push_half_space(struct streamzap_ir *sz,
+			       unsigned long value)
+{
+	sz_push_full_space(sz, value & SZ_SPACE_MASK);
+}
+
+/**
+ * streamzap_callback - usb IRQ handler callback
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void streamzap_callback(struct urb *urb)
+{
+	struct streamzap_ir *sz;
+	unsigned int i;
+	int len;
+
+	if (!urb)
+		return;
+
+	sz = urb->context;
+	len = urb->actual_length;
+
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/*
+		 * this urb is terminated, clean up.
+		 * sz might already be invalid at this point
+		 */
+		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
+		return;
+	default:
+		break;
+	}
+
+	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
+	for (i = 0; i < len; i++) {
+		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
+			i, (unsigned char)sz->buf_in[i]);
+		switch (sz->decoder_state) {
+		case PulseSpace:
+			if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
+				SZ_PULSE_MASK) {
+				sz->decoder_state = FullPulse;
+				continue;
+			} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
+					== SZ_SPACE_MASK) {
+				sz_push_half_pulse(sz, sz->buf_in[i]);
+				sz->decoder_state = FullSpace;
+				continue;
+			} else {
+				sz_push_half_pulse(sz, sz->buf_in[i]);
+				sz_push_half_space(sz, sz->buf_in[i]);
+			}
+			break;
+		case FullPulse:
+			sz_push_full_pulse(sz, sz->buf_in[i]);
+			sz->decoder_state = IgnorePulse;
+			break;
+		case FullSpace:
+			if (sz->buf_in[i] == SZ_TIMEOUT) {
+				DEFINE_IR_RAW_EVENT(rawir);
+
+				rawir.pulse = false;
+				rawir.duration = sz->props->timeout;
+				sz->idle = true;
+				if (sz->timeout_enabled)
+					sz_push(sz, rawir);
+				ir_raw_event_handle(sz->idev);
+			} else {
+				sz_push_full_space(sz, sz->buf_in[i]);
+			}
+			sz->decoder_state = PulseSpace;
+			break;
+		case IgnorePulse:
+			if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
+				SZ_SPACE_MASK) {
+				sz->decoder_state = FullSpace;
+				continue;
+			}
+			sz_push_half_space(sz, sz->buf_in[i]);
+			sz->decoder_state = PulseSpace;
+			break;
+		}
+	}
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+
+	return;
+}
+
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+	struct device *dev = sz->dev;
+	int ret;
+
+	idev = input_allocate_device();
+	if (!idev) {
+		dev_err(dev, "remote input dev allocation failed\n");
+		goto idev_alloc_failed;
+	}
+
+	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+	if (!props) {
+		dev_err(dev, "remote ir dev props allocation failed\n");
+		goto props_alloc_failed;
+	}
+
+	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+		 "Receiver (%04x:%04x)",
+		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
+		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+	idev->name = sz->name;
+	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+	strlcat(sz->phys, "/input0", sizeof(sz->phys));
+	idev->phys = sz->phys;
+
+	props->priv = sz;
+	props->driver_type = RC_DRIVER_IR_RAW;
+	props->allowed_protos = IR_TYPE_ALL;
+
+	sz->props = props;
+
+	usb_to_input_id(sz->usbdev, &idev->id);
+	idev->dev.parent = sz->dev;
+
+	ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
+	if (ret < 0) {
+		dev_err(dev, "remote input device register failed\n");
+		goto irdev_failed;
+	}
+
+	return idev;
+
+irdev_failed:
+	kfree(props);
+props_alloc_failed:
+	input_free_device(idev);
+idev_alloc_failed:
+	return NULL;
+}
+
+/**
+ *	streamzap_probe
+ *
+ *	Called by usb-core to associated with a candidate device
+ *	On any failure the return value is the ERROR
+ *	On success return 0
+ */
+static int __devinit streamzap_probe(struct usb_interface *intf,
+				     const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_interface *iface_host;
+	struct streamzap_ir *sz = NULL;
+	char buf[63], name[128] = "";
+	int retval = -ENOMEM;
+	int pipe, maxp;
+
+	/* Allocate space for device driver specific data */
+	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+	if (!sz)
+		return -ENOMEM;
+
+	sz->usbdev = usbdev;
+	sz->interface = intf;
+
+	/* Check to ensure endpoint information matches requirements */
+	iface_host = intf->cur_altsetting;
+
+	if (iface_host->desc.bNumEndpoints != 1) {
+		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+			__func__, iface_host->desc.bNumEndpoints);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	sz->endpoint = &(iface_host->endpoint[0].desc);
+	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+	    != USB_DIR_IN) {
+		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+	    != USB_ENDPOINT_XFER_INT) {
+		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+			"02%02x\n", __func__, sz->endpoint->bmAttributes);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+	if (maxp == 0) {
+		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+			__func__);
+		retval = -ENODEV;
+		goto free_sz;
+	}
+
+	/* Allocate the USB buffer and IRQ URB */
+	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+	if (!sz->buf_in)
+		goto free_sz;
+
+	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+	if (!sz->urb_in)
+		goto free_buf_in;
+
+	sz->dev = &intf->dev;
+	sz->buf_in_len = maxp;
+
+	if (usbdev->descriptor.iManufacturer
+	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
+			  buf, sizeof(buf)) > 0)
+		strlcpy(name, buf, sizeof(name));
+
+	if (usbdev->descriptor.iProduct
+	    && usb_string(usbdev, usbdev->descriptor.iProduct,
+			  buf, sizeof(buf)) > 0)
+		snprintf(name + strlen(name), sizeof(name) - strlen(name),
+			 " %s", buf);
+
+	sz->idev = streamzap_init_input_dev(sz);
+	if (!sz->idev)
+		goto input_dev_fail;
+
+	sz->idle = true;
+	sz->decoder_state = PulseSpace;
+	/* FIXME: don't yet have a way to set this */
+	sz->timeout_enabled = true;
+	sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
+				IR_MAX_DURATION) | 0x03000000);
+	#if 0
+	/* not yet supported, depends on patches from maxim */
+	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+	sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
+	sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
+	#endif
+
+	do_gettimeofday(&sz->signal_start);
+
+	/* Complete final initialisations */
+	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+			 maxp, (usb_complete_t)streamzap_callback,
+			 sz, sz->endpoint->bInterval);
+	sz->urb_in->transfer_dma = sz->dma_in;
+	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_set_intfdata(intf, sz);
+
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+		dev_err(sz->dev, "urb submit failed\n");
+
+	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+		 usbdev->bus->busnum, usbdev->devnum);
+
+	/* Load the streamzap not-quite-rc5 decoder too */
+	load_rc5_sz_decode();
+
+	return 0;
+
+input_dev_fail:
+	usb_free_urb(sz->urb_in);
+free_buf_in:
+	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+	kfree(sz);
+
+	return retval;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->usbdev.  It is also supposed to terminate any currently
+ * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	usb_set_intfdata(interface, NULL);
+
+	if (!sz)
+		return;
+
+	sz->usbdev = NULL;
+	ir_input_unregister(sz->idev);
+	usb_kill_urb(sz->urb_in);
+	usb_free_urb(sz->urb_in);
+	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+	kfree(sz);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	usb_kill_urb(sz->urb_in);
+
+	return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+	struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+		dev_err(sz->dev, "Error sumbiting urb\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ *	streamzap_init
+ */
+static int __init streamzap_init(void)
+{
+	int ret;
+
+	/* register this driver with the USB subsystem */
+	ret = usb_register(&streamzap_driver);
+	if (ret < 0)
+		printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+		       "result = %d\n", ret);
+
+	return ret;
+}
+
+/**
+ *	streamzap_exit
+ */
+static void __exit streamzap_exit(void)
+{
+	usb_deregister(&streamzap_driver);
+}
+
+
+module_init(streamzap_init);
+module_exit(streamzap_exit);
+
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
-- 
cgit v1.2.3


From f62de675f796a992011c598c405a3d6fada9aa20 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 9 Nov 2010 23:09:57 -0300
Subject: [media] Rename rc-core files from ir- to rc-

As protocol decoders are specific to InfraRed, keep their names as-is.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Makefile            |   4 +-
 drivers/media/rc/ir-core-priv.h      | 203 ----------
 drivers/media/rc/ir-functions.c      |   2 +-
 drivers/media/rc/ir-jvc-decoder.c    |   2 +-
 drivers/media/rc/ir-keytable.c       | 766 -----------------------------------
 drivers/media/rc/ir-lirc-codec.c     |   2 +-
 drivers/media/rc/ir-nec-decoder.c    |   2 +-
 drivers/media/rc/ir-raw-event.c      | 382 -----------------
 drivers/media/rc/ir-rc5-decoder.c    |   2 +-
 drivers/media/rc/ir-rc5-sz-decoder.c |   2 +-
 drivers/media/rc/ir-rc6-decoder.c    |   2 +-
 drivers/media/rc/ir-sony-decoder.c   |   2 +-
 drivers/media/rc/ir-sysfs.c          | 362 -----------------
 drivers/media/rc/rc-core-priv.h      | 203 ++++++++++
 drivers/media/rc/rc-main.c           | 766 +++++++++++++++++++++++++++++++++++
 drivers/media/rc/rc-raw.c            | 382 +++++++++++++++++
 drivers/media/rc/rc-sysfs.c          | 362 +++++++++++++++++
 17 files changed, 1723 insertions(+), 1723 deletions(-)
 delete mode 100644 drivers/media/rc/ir-core-priv.h
 delete mode 100644 drivers/media/rc/ir-keytable.c
 delete mode 100644 drivers/media/rc/ir-raw-event.c
 delete mode 100644 drivers/media/rc/ir-sysfs.c
 create mode 100644 drivers/media/rc/rc-core-priv.h
 create mode 100644 drivers/media/rc/rc-main.c
 create mode 100644 drivers/media/rc/rc-raw.c
 create mode 100644 drivers/media/rc/rc-sysfs.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 38873cff3429..479a8f4c3a9e 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,9 +1,9 @@
 ir-common-objs  := ir-functions.o
-ir-core-objs	:= ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
+rc-core-objs	:= rc-main.o rc-sysfs.o rc-raw.o rc-map.o
 
 obj-y += keymaps/
 
-obj-$(CONFIG_IR_CORE) += ir-core.o
+obj-$(CONFIG_IR_CORE) += rc-core.o
 obj-$(CONFIG_IR_LEGACY) += ir-common.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
diff --git a/drivers/media/rc/ir-core-priv.h b/drivers/media/rc/ir-core-priv.h
deleted file mode 100644
index 81c936bd793f..000000000000
--- a/drivers/media/rc/ir-core-priv.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Remote Controller core raw events header
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IR_RAW_EVENT
-#define _IR_RAW_EVENT
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <media/ir-core.h>
-
-struct ir_raw_handler {
-	struct list_head list;
-
-	u64 protocols; /* which are handled by this handler */
-	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
-
-	/* These two should only be used by the lirc decoder */
-	int (*raw_register)(struct input_dev *input_dev);
-	int (*raw_unregister)(struct input_dev *input_dev);
-};
-
-struct ir_raw_event_ctrl {
-	struct list_head		list;		/* to keep track of raw clients */
-	struct task_struct		*thread;
-	spinlock_t			lock;
-	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
-	ktime_t				last_event;	/* when last event occurred */
-	enum raw_event_type		last_type;	/* last event type */
-	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
-	u64				enabled_protocols; /* enabled raw protocol decoders */
-
-	/* raw decoder state follows */
-	struct ir_raw_event prev_ev;
-	struct ir_raw_event this_ev;
-	struct nec_dec {
-		int state;
-		unsigned count;
-		u32 bits;
-		bool is_nec_x;
-		bool necx_repeat;
-	} nec;
-	struct rc5_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc5;
-	struct rc6_dec {
-		int state;
-		u8 header;
-		u32 body;
-		bool toggle;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc6;
-	struct sony_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-	} sony;
-	struct jvc_dec {
-		int state;
-		u16 bits;
-		u16 old_bits;
-		unsigned count;
-		bool first;
-		bool toggle;
-	} jvc;
-	struct rc5_sz_dec {
-		int state;
-		u32 bits;
-		unsigned count;
-		unsigned wanted_bits;
-	} rc5_sz;
-	struct lirc_codec {
-		struct ir_input_dev *ir_dev;
-		struct lirc_driver *drv;
-		int carrier_low;
-
-		ktime_t gap_start;
-		u64 gap_duration;
-		bool gap;
-		bool send_timeout_reports;
-
-	} lirc;
-};
-
-/* macros for IR decoders */
-static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
-	return d1 > (d2 - margin);
-}
-
-static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
-	return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
-}
-
-static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
-{
-	return x->pulse != y->pulse;
-}
-
-static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
-{
-	if (duration > ev->duration)
-		ev->duration = 0;
-	else
-		ev->duration -= duration;
-}
-
-/* Returns true if event is normal pulse/space event */
-static inline bool is_timing_event(struct ir_raw_event ev)
-{
-	return !ev.carrier_report && !ev.reset;
-}
-
-#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
-#define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
-
-/*
- * Routines from ir-raw-event.c to be used internally and by decoders
- */
-u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_init(void);
-
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
-/*
- * Decoder initialization code
- *
- * Those load logic are called during ir-core init, and automatically
- * loads the compiled decoders for their usage with IR raw events
- */
-
-/* from ir-nec-decoder.c */
-#ifdef CONFIG_IR_NEC_DECODER_MODULE
-#define load_nec_decode()	request_module("ir-nec-decoder")
-#else
-#define load_nec_decode()	0
-#endif
-
-/* from ir-rc5-decoder.c */
-#ifdef CONFIG_IR_RC5_DECODER_MODULE
-#define load_rc5_decode()	request_module("ir-rc5-decoder")
-#else
-#define load_rc5_decode()	0
-#endif
-
-/* from ir-rc6-decoder.c */
-#ifdef CONFIG_IR_RC6_DECODER_MODULE
-#define load_rc6_decode()	request_module("ir-rc6-decoder")
-#else
-#define load_rc6_decode()	0
-#endif
-
-/* from ir-jvc-decoder.c */
-#ifdef CONFIG_IR_JVC_DECODER_MODULE
-#define load_jvc_decode()	request_module("ir-jvc-decoder")
-#else
-#define load_jvc_decode()	0
-#endif
-
-/* from ir-sony-decoder.c */
-#ifdef CONFIG_IR_SONY_DECODER_MODULE
-#define load_sony_decode()	request_module("ir-sony-decoder")
-#else
-#define load_sony_decode()	0
-#endif
-
-/* from ir-lirc-codec.c */
-#ifdef CONFIG_IR_LIRC_CODEC_MODULE
-#define load_lirc_codec()	request_module("ir-lirc-codec")
-#else
-#define load_lirc_codec()	0
-#endif
-
-
-#endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/rc/ir-functions.c b/drivers/media/rc/ir-functions.c
index ec021c92527a..14397d0541d8 100644
--- a/drivers/media/rc/ir-functions.c
+++ b/drivers/media/rc/ir-functions.c
@@ -24,7 +24,7 @@
 #include <linux/string.h>
 #include <linux/jiffies.h>
 #include <media/ir-common.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 /* -------------------------------------------------------------------------- */
 
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index 63dca6e5458b..d83a5f64bfe4 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define JVC_NBITS		16		/* dev(8) + func(8) */
 #define JVC_UNIT		525000		/* ns */
diff --git a/drivers/media/rc/ir-keytable.c b/drivers/media/rc/ir-keytable.c
deleted file mode 100644
index 8039110350d3..000000000000
--- a/drivers/media/rc/ir-keytable.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/* ir-keytable.c - handle IR scancode->keycode tables
- *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include "ir-core-priv.h"
-
-/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
-#define IR_TAB_MIN_SIZE	256
-#define IR_TAB_MAX_SIZE	8192
-
-/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
-#define IR_KEYPRESS_TIMEOUT 250
-
-/**
- * ir_create_table() - initializes a scancode table
- * @rc_tab:	the ir_scancode_table to initialize
- * @name:	name to assign to the table
- * @ir_type:	ir type to assign to the new table
- * @size:	initial size of the table
- * @return:	zero on success or a negative error code
- *
- * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
- */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
-			   const char *name, u64 ir_type, size_t size)
-{
-	rc_tab->name = name;
-	rc_tab->ir_type = ir_type;
-	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
-	if (!rc_tab->scan)
-		return -ENOMEM;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-	return 0;
-}
-
-/**
- * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab:	the table whose mappings need to be freed
- *
- * This routine will free memory alloctaed for key mappings used by given
- * scancode table.
- */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
-{
-	rc_tab->size = 0;
-	kfree(rc_tab->scan);
-	rc_tab->scan = NULL;
-}
-
-/**
- * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab:	the ir_scancode_table to resize
- * @gfp_flags:	gfp flags to use when allocating memory
- * @return:	zero on success or a negative error code
- *
- * This routine will shrink the ir_scancode_table if it has lots of
- * unused entries and grow it if it is full.
- */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
-{
-	unsigned int oldalloc = rc_tab->alloc;
-	unsigned int newalloc = oldalloc;
-	struct ir_scancode *oldscan = rc_tab->scan;
-	struct ir_scancode *newscan;
-
-	if (rc_tab->size == rc_tab->len) {
-		/* All entries in use -> grow keytable */
-		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
-			return -ENOMEM;
-
-		newalloc *= 2;
-		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
-	}
-
-	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
-		/* Less than 1/3 of entries in use -> shrink keytable */
-		newalloc /= 2;
-		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
-	}
-
-	if (newalloc == oldalloc)
-		return 0;
-
-	newscan = kmalloc(newalloc, gfp_flags);
-	if (!newscan) {
-		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
-		return -ENOMEM;
-	}
-
-	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
-	rc_tab->scan = newscan;
-	rc_tab->alloc = newalloc;
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	kfree(oldscan);
-	return 0;
-}
-
-/**
- * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @rc_tab:	scancode table to be adjusted
- * @index:	index of the mapping that needs to be updated
- * @keycode:	the desired keycode
- * @return:	previous keycode assigned to the mapping
- *
- * This routine is used to update scancode->keycopde mapping at given
- * position.
- */
-static unsigned int ir_update_mapping(struct input_dev *dev,
-				      struct ir_scancode_table *rc_tab,
-				      unsigned int index,
-				      unsigned int new_keycode)
-{
-	int old_keycode = rc_tab->scan[index].keycode;
-	int i;
-
-	/* Did the user wish to remove the mapping? */
-	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
-		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
-			   index, rc_tab->scan[index].scancode);
-		rc_tab->len--;
-		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
-			(rc_tab->len - index) * sizeof(struct ir_scancode));
-	} else {
-		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
-			   index,
-			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
-			   rc_tab->scan[index].scancode, new_keycode);
-		rc_tab->scan[index].keycode = new_keycode;
-		__set_bit(new_keycode, dev->keybit);
-	}
-
-	if (old_keycode != KEY_RESERVED) {
-		/* A previous mapping was updated... */
-		__clear_bit(old_keycode, dev->keybit);
-		/* ... but another scancode might use the same keycode */
-		for (i = 0; i < rc_tab->len; i++) {
-			if (rc_tab->scan[i].keycode == old_keycode) {
-				__set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-
-		/* Possibly shrink the keytable, failure is not a problem */
-		ir_resize_table(rc_tab, GFP_ATOMIC);
-	}
-
-	return old_keycode;
-}
-
-/**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev:	the struct ir_input_dev device descriptor
- * @rc_tab:	scancode table to be searched
- * @scancode:	the desired scancode
- * @resize:	controls whether we allowed to resize the table to
- *		accomodate not yet present scancodes
- * @return:	index of the mapping containing scancode in question
- *		or -1U in case of failure.
- *
- * This routine is used to locate given scancode in ir_scancode_table.
- * If scancode is not yet present the routine will allocate a new slot
- * for it.
- */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
-					  struct ir_scancode_table *rc_tab,
-					  unsigned int scancode,
-					  bool resize)
-{
-	unsigned int i;
-
-	/*
-	 * Unfortunately, some hardware-based IR decoders don't provide
-	 * all bits for the complete IR code. In general, they provide only
-	 * the command part of the IR code. Yet, as it is possible to replace
-	 * the provided IR with another one, it is needed to allow loading
-	 * IR tables from other remotes. So,
-	 */
-	if (ir_dev->props && ir_dev->props->scanmask)
-		scancode &= ir_dev->props->scanmask;
-
-	/* First check if we already have a mapping for this ir command */
-	for (i = 0; i < rc_tab->len; i++) {
-		if (rc_tab->scan[i].scancode == scancode)
-			return i;
-
-		/* Keytable is sorted from lowest to highest scancode */
-		if (rc_tab->scan[i].scancode >= scancode)
-			break;
-	}
-
-	/* No previous mapping found, we might need to grow the table */
-	if (rc_tab->size == rc_tab->len) {
-		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
-			return -1U;
-	}
-
-	/* i is the proper index to insert our new keycode */
-	if (i < rc_tab->len)
-		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
-			(rc_tab->len - i) * sizeof(struct ir_scancode));
-	rc_tab->scan[i].scancode = scancode;
-	rc_tab->scan[i].keycode = KEY_RESERVED;
-	rc_tab->len++;
-
-	return i;
-}
-
-/**
- * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	result
- * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
- *
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- */
-static int ir_setkeycode(struct input_dev *dev,
-			 const struct input_keymap_entry *ke,
-			 unsigned int *old_keycode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-		if (index >= rc_tab->len) {
-			retval = -EINVAL;
-			goto out;
-		}
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
-		if (index >= rc_tab->len) {
-			retval = -ENOMEM;
-			goto out;
-		}
-	}
-
-	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @to:		the struct ir_scancode_table to copy entries to
- * @from:	the struct ir_scancode_table to copy entries from
- * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
- *
- * This routine is used to handle table initialization.
- */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
-			  const struct ir_scancode_table *from)
-{
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int i, index;
-	int rc;
-
-	rc = ir_create_table(&ir_dev->rc_tab,
-			     from->name, from->ir_type, from->size);
-	if (rc)
-		return rc;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-
-	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(ir_dev, rc_tab,
-					      from->scan[i].scancode, false);
-		if (index >= rc_tab->len) {
-			rc = -ENOMEM;
-			break;
-		}
-
-		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
-				  from->scan[i].keycode);
-	}
-
-	if (rc)
-		ir_free_table(rc_tab);
-
-	return rc;
-}
-
-/**
- * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab:	the &struct ir_scancode_table to search
- * @scancode:	scancode to look for in the table
- * @return:	index in the table, -1U if not found
- *
- * This routine performs binary search in RC keykeymap table for
- * given scancode.
- */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
-					  unsigned int scancode)
-{
-	int start = 0;
-	int end = rc_tab->len - 1;
-	int mid;
-
-	while (start <= end) {
-		mid = (start + end) / 2;
-		if (rc_tab->scan[mid].scancode < scancode)
-			start = mid + 1;
-		else if (rc_tab->scan[mid].scancode > scancode)
-			end = mid - 1;
-		else
-			return mid;
-	}
-
-	return -1U;
-}
-
-/**
- * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	used to return the keycode, if found, or KEY_RESERVED
- * @return:	always returns zero.
- *
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- */
-static int ir_getkeycode(struct input_dev *dev,
-			 struct input_keymap_entry *ke)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	struct ir_scancode *entry;
-	unsigned long flags;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_lookup_by_scancode(rc_tab, scancode);
-	}
-
-	if (index >= rc_tab->len) {
-		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
-			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
-				   scancode);
-		retval = -EINVAL;
-		goto out;
-	}
-
-	entry = &rc_tab->scan[index];
-
-	ke->index = index;
-	ke->keycode = entry->keycode;
-	ke->len = sizeof(entry->scancode);
-	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
-	retval = 0;
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev:	the struct input_dev descriptor of the device
- * @scancode:	the scancode that we're seeking
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
- */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int keycode;
-	unsigned int index;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	index = ir_lookup_by_scancode(rc_tab, scancode);
-	keycode = index < rc_tab->len ?
-			rc_tab->scan[index].keycode : KEY_RESERVED;
-
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-
-	if (keycode != KEY_RESERVED)
-		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
-			   dev->name, scancode, keycode);
-
-	return keycode;
-}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
-
-/**
- * ir_do_keyup() - internal function to signal the release of a keypress
- * @ir:         the struct ir_input_dev descriptor of the device
- *
- * This function is used internally to release a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keyup(struct ir_input_dev *ir)
-{
-	if (!ir->keypressed)
-		return;
-
-	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
-	input_report_key(ir->input_dev, ir->last_keycode, 0);
-	input_sync(ir->input_dev);
-	ir->keypressed = false;
-}
-
-/**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev:        the struct input_dev descriptor of the device
- *
- * This routine is used to signal that a key has been released on the
- * remote control.
- */
-void ir_keyup(struct input_dev *dev)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keyup);
-
-/**
- * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
- *
- * This routine will generate a keyup event some time after a keydown event
- * is generated when no further activity has been detected.
- */
-static void ir_timer_keyup(unsigned long cookie)
-{
-	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
-	unsigned long flags;
-
-	/*
-	 * ir->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
-		ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-
-/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev:        the struct input_dev descriptor of the device
- *
- * This routine is used by IR decoders when a repeat message which does
- * not include the necessary bits to reproduce the scancode has been
- * received.
- */
-void ir_repeat(struct input_dev *dev)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-
-	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
-
-	if (!ir->keypressed)
-		goto out;
-
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-
-out:
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_repeat);
-
-/**
- * ir_do_keydown() - internal function to process a keypress
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode of the keypress
- * @keycode:    the keycode of the keypress
- * @toggle:     the toggle value of the keypress
- *
- * This function is used internally to register a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keydown(struct input_dev *dev, int scancode,
-			  u32 keycode, u8 toggle)
-{
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	input_event(dev, EV_MSC, MSC_SCAN, scancode);
-
-	/* Repeat event? */
-	if (ir->keypressed &&
-	    ir->last_scancode == scancode &&
-	    ir->last_toggle == toggle)
-		return;
-
-	/* Release old keypress */
-	ir_do_keyup(ir);
-
-	ir->last_scancode = scancode;
-	ir->last_toggle = toggle;
-	ir->last_keycode = keycode;
-
-	if (keycode == KEY_RESERVED)
-		return;
-
-	/* Register a keypress */
-	ir->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->name, keycode, scancode);
-	input_report_key(dev, ir->last_keycode, 1);
-	input_sync(dev);
-}
-
-/**
- * ir_keydown() - generates input event for a key press
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
- */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
-
-	if (ir->keypressed) {
-		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-	}
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown);
-
-/**
- * ir_keydown_notimeout() - generates input event for a key press without
- *                          an automatic keyup event at a later time
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
- */
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
-
-static int ir_open(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- *			    for keymap table get/set
- * @input_dev:	the struct input_dev descriptor of the device
- * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
-		      const struct ir_scancode_table *rc_tab,
-		      struct ir_dev_props *props,
-		      const char *driver_name)
-{
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (rc_tab->scan == NULL || !rc_tab->size)
-		return -EINVAL;
-
-	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
-	if (!ir_dev)
-		return -ENOMEM;
-
-	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
-	if (!ir_dev->driver_name) {
-		rc = -ENOMEM;
-		goto out_dev;
-	}
-
-	input_dev->getkeycode_new = ir_getkeycode;
-	input_dev->setkeycode_new = ir_setkeycode;
-	input_set_drvdata(input_dev, ir_dev);
-	ir_dev->input_dev = input_dev;
-
-	spin_lock_init(&ir_dev->rc_tab.lock);
-	spin_lock_init(&ir_dev->keylock);
-	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
-	if (props) {
-		ir_dev->props = props;
-		if (props->open)
-			input_dev->open = ir_open;
-		if (props->close)
-			input_dev->close = ir_close;
-	}
-
-	set_bit(EV_KEY, input_dev->evbit);
-	set_bit(EV_REP, input_dev->evbit);
-	set_bit(EV_MSC, input_dev->evbit);
-	set_bit(MSC_SCAN, input_dev->mscbit);
-
-	rc = ir_setkeytable(ir_dev, rc_tab);
-	if (rc)
-		goto out_name;
-
-	rc = ir_register_class(input_dev);
-	if (rc < 0)
-		goto out_table;
-
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-			rc = ir_raw_event_register(input_dev);
-			if (rc < 0)
-				goto out_event;
-		}
-
-	rc = ir_register_input(input_dev);
-	if (rc < 0)
-		goto out_event;
-
-	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
-		   driver_name, rc_tab->name,
-		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
-			" in raw mode" : "");
-
-	/*
-	 * Default delay of 250ms is too short for some protocols, expecially
-	 * since the timeout is currently set to 250ms. Increase it to 500ms,
-	 * to avoid wrong repetition of the keycodes.
-	 */
-	input_dev->rep[REP_DELAY] = 500;
-
-	return 0;
-
-out_event:
-	ir_unregister_class(input_dev);
-out_table:
-	ir_free_table(&ir_dev->rc_tab);
-out_name:
-	kfree(ir_dev->driver_name);
-out_dev:
-	kfree(ir_dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev:	the struct input_dev descriptor of the device
-
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	if (!ir_dev)
-		return;
-
-	IR_dprintk(1, "Freed keycode table\n");
-
-	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-			ir_raw_event_unregister(input_dev);
-
-	ir_free_table(&ir_dev->rc_tab);
-
-	ir_unregister_class(input_dev);
-
-	kfree(ir_dev->driver_name);
-	kfree(ir_dev);
-}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
-
-int ir_core_debug;    /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 9fc0db9d344d..9345995dbf14 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -17,7 +17,7 @@
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
 #include <media/ir-core.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define LIRCBUF_SIZE 256
 
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 70993f79c8a2..cad4e994aa78 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define NEC_NBITS		32
 #define NEC_UNIT		562500  /* ns */
diff --git a/drivers/media/rc/ir-raw-event.c b/drivers/media/rc/ir-raw-event.c
deleted file mode 100644
index a06a07e4e0b1..000000000000
--- a/drivers/media/rc/ir-raw-event.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/kthread.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/freezer.h>
-#include "ir-core-priv.h"
-
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE      512
-
-/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
-static LIST_HEAD(ir_raw_client_list);
-
-/* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
-static LIST_HEAD(ir_raw_handler_list);
-static u64 available_protocols;
-
-#ifdef MODULE
-/* Used to load the decoders */
-static struct work_struct wq_load;
-#endif
-
-static int ir_raw_event_thread(void *data)
-{
-	struct ir_raw_event ev;
-	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
-	int retval;
-
-	while (!kthread_should_stop()) {
-
-		spin_lock_irq(&raw->lock);
-		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
-
-		if (!retval) {
-			set_current_state(TASK_INTERRUPTIBLE);
-
-			if (kthread_should_stop())
-				set_current_state(TASK_RUNNING);
-
-			spin_unlock_irq(&raw->lock);
-			schedule();
-			continue;
-		}
-
-		spin_unlock_irq(&raw->lock);
-
-
-		BUG_ON(retval != sizeof(ev));
-
-		mutex_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
-		raw->prev_ev = ev;
-		mutex_unlock(&ir_raw_handler_lock);
-	}
-
-	return 0;
-}
-
-/**
- * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev:	the struct input_dev device descriptor
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This routine (which may be called from an interrupt context) stores a
- * pulse/space duration for the raw ir decoding state machines. Pulses are
- * signalled as positive values and spaces as negative values. A zero value
- * will reset the decoding state machines.
- */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
-	if (!ir->raw)
-		return -EINVAL;
-
-	IR_dprintk(2, "sample: (%05dus %s)\n",
-		TO_US(ev->duration), TO_STR(ev->pulse));
-
-	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
-		return -ENOMEM;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store);
-
-/**
- * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev:	the struct input_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) is used to
- * store the beginning of an ir pulse or space (or the start/end of ir
- * reception) for the raw ir decoding state machines. This is used by
- * hardware which does not provide durations directly but only interrupts
- * (or similar events) on state change.
- */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
-{
-	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
-	ktime_t			now;
-	s64			delta; /* ns */
-	struct ir_raw_event	ev;
-	int			rc = 0;
-
-	if (!ir->raw)
-		return -EINVAL;
-
-	now = ktime_get();
-	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
-
-	/* Check for a long duration since last event or if we're
-	 * being called for the first time, note that delta can't
-	 * possibly be negative.
-	 */
-	ev.duration = 0;
-	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
-		type |= IR_START_EVENT;
-	else
-		ev.duration = delta;
-
-	if (type & IR_START_EVENT)
-		ir_raw_event_reset(input_dev);
-	else if (ir->raw->last_type & IR_SPACE) {
-		ev.pulse = false;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else if (ir->raw->last_type & IR_PULSE) {
-		ev.pulse = true;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else
-		return 0;
-
-	ir->raw->last_event = now;
-	ir->raw->last_type = type;
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
-
-/**
- * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev:	the struct input_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
- * This routine is intended for devices with limited internal buffer
- * It automerges samples of same type, and handles timeouts
- */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-						struct ir_raw_event *ev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!raw || !ir->props)
-		return -EINVAL;
-
-	/* Ignore spaces in idle mode */
-	if (ir->idle && !ev->pulse)
-		return 0;
-	else if (ir->idle)
-		ir_raw_event_set_idle(input_dev, false);
-
-	if (!raw->this_ev.duration) {
-		raw->this_ev = *ev;
-	} else if (ev->pulse == raw->this_ev.pulse) {
-		raw->this_ev.duration += ev->duration;
-	} else {
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		raw->this_ev = *ev;
-	}
-
-	/* Enter idle mode if nessesary */
-	if (!ev->pulse && ir->props->timeout &&
-		raw->this_ev.duration >= ir->props->timeout) {
-		ir_raw_event_set_idle(input_dev, true);
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
-
-/**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
- */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!ir->props || !ir->raw)
-		return;
-
-	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
-
-	if (idle) {
-		raw->this_ev.timeout = true;
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		init_ir_raw_event(&raw->this_ev);
-	}
-
-	if (ir->props->s_idle)
-		ir->props->s_idle(ir->props->priv, idle);
-	ir->idle = idle;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
-
-/**
- * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev:	the struct input_dev device descriptor
- *
- * This routine will signal the workqueue to start decoding stored ir data.
- */
-void ir_raw_event_handle(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	unsigned long flags;
-
-	if (!ir->raw)
-		return;
-
-	spin_lock_irqsave(&ir->raw->lock, flags);
-	wake_up_process(ir->raw->thread);
-	spin_unlock_irqrestore(&ir->raw->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_handle);
-
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_allowed_protocols()
-{
-	u64 protocols;
-	mutex_lock(&ir_raw_handler_lock);
-	protocols = available_protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-	return protocols;
-}
-
-/*
- * Used to (un)register raw event clients
- */
-int ir_raw_event_register(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	int rc;
-	struct ir_raw_handler *handler;
-
-	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
-	if (!ir->raw)
-		return -ENOMEM;
-
-	ir->raw->input_dev = input_dev;
-
-	ir->raw->enabled_protocols = ~0;
-	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
-			 GFP_KERNEL);
-	if (rc < 0) {
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
-	}
-
-	spin_lock_init(&ir->raw->lock);
-	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
-			"rc%u",  (unsigned int)ir->devno);
-
-	if (IS_ERR(ir->raw->thread)) {
-		int ret = PTR_ERR(ir->raw->thread);
-
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return ret;
-	}
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir->raw->list, &ir_raw_client_list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_register)
-			handler->raw_register(ir->raw->input_dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-}
-
-void ir_raw_event_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_handler *handler;
-
-	if (!ir->raw)
-		return;
-
-	kthread_stop(ir->raw->thread);
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir->raw->list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_unregister)
-			handler->raw_unregister(ir->raw->input_dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	kfifo_free(&ir->raw->kfifo);
-	kfree(ir->raw);
-	ir->raw = NULL;
-}
-
-/*
- * Extension interface - used to register the IR decoders
- */
-
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
-	if (ir_raw_handler->raw_register)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_register(raw->input_dev);
-	available_protocols |= ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ir_raw_handler_register);
-
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir_raw_handler->list);
-	if (ir_raw_handler->raw_unregister)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_unregister(raw->input_dev);
-	available_protocols &= ~ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-}
-EXPORT_SYMBOL(ir_raw_handler_unregister);
-
-#ifdef MODULE
-static void init_decoders(struct work_struct *work)
-{
-	/* Load the decoder modules */
-
-	load_nec_decode();
-	load_rc5_decode();
-	load_rc6_decode();
-	load_jvc_decode();
-	load_sony_decode();
-	load_lirc_codec();
-
-	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at ir-core.h
-	 */
-}
-#endif
-
-void ir_raw_init(void)
-{
-#ifdef MODULE
-	INIT_WORK(&wq_load, init_decoders);
-	schedule_work(&wq_load);
-#endif
-}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index 572ed4ca8c68..c07f6e0bb962 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -20,7 +20,7 @@
  * the first two bits are start bits, and a third one is a filing bit
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define RC5_NBITS		14
 #define RC5X_NBITS		20
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index 7c413501a3f7..0c3b6eb4ccd6 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -20,7 +20,7 @@
  * the first two bits are start bits, and a third one is a filing bit
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define RC5_SZ_NBITS		15
 #define RC5_UNIT		888888 /* ns */
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index d25da91f44ff..48e82be5e01e 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 /*
  * This decoder currently supports:
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 2d15730822bc..0a5cadbf9bfb 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define SONY_UNIT		600000 /* ns */
 #define SONY_HEADER_PULSE	(4 * SONY_UNIT)
diff --git a/drivers/media/rc/ir-sysfs.c b/drivers/media/rc/ir-sysfs.c
deleted file mode 100644
index 38423a8da871..000000000000
--- a/drivers/media/rc/ir-sysfs.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "ir-core-priv.h"
-
-#define IRRCV_NUM_DEVICES	256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
-	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
-	.name		= "rc",
-	.devnode	= ir_devnode,
-};
-
-static struct {
-	u64	type;
-	char	*name;
-} proto_names[] = {
-	{ IR_TYPE_UNKNOWN,	"unknown"	},
-	{ IR_TYPE_RC5,		"rc-5"		},
-	{ IR_TYPE_NEC,		"nec"		},
-	{ IR_TYPE_RC6,		"rc-6"		},
-	{ IR_TYPE_JVC,		"jvc"		},
-	{ IR_TYPE_SONY,		"sony"		},
-	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ IR_TYPE_LIRC,		"lirc"		},
-};
-
-#define PROTO_NONE	"none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
-			      struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 allowed, enabled;
-	char *tmp = buf;
-	int i;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = ir_dev->rc_tab.ir_type;
-		allowed = ir_dev->props->allowed_protos;
-	} else if (ir_dev->raw) {
-		enabled = ir_dev->raw->enabled_protocols;
-		allowed = ir_raw_get_allowed_protocols();
-	} else
-		return sprintf(tmp, "[builtin]\n");
-
-	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
-		   (long long)allowed,
-		   (long long)enabled);
-
-	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-		if (allowed & enabled & proto_names[i].type)
-			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
-		else if (allowed & proto_names[i].type)
-			tmp += sprintf(tmp, "%s ", proto_names[i].name);
-	}
-
-	if (tmp != buf)
-		tmp--;
-	*tmp = '\n';
-	return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the input buffer
- * @len:	length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
-			       struct device_attribute *mattr,
-			       const char *data,
-			       size_t len)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	bool enable, disable;
-	const char *tmp;
-	u64 type;
-	u64 mask;
-	int rc, i, count = 0;
-	unsigned long flags;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else if (ir_dev->raw)
-		type = ir_dev->raw->enabled_protocols;
-	else {
-		IR_dprintk(1, "Protocol switching not supported\n");
-		return -EINVAL;
-	}
-
-	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
-		if (!*tmp)
-			break;
-
-		if (*tmp == '+') {
-			enable = true;
-			disable = false;
-			tmp++;
-		} else if (*tmp == '-') {
-			enable = false;
-			disable = true;
-			tmp++;
-		} else {
-			enable = false;
-			disable = false;
-		}
-
-		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
-			tmp += sizeof(PROTO_NONE);
-			mask = 0;
-			count++;
-		} else {
-			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
-					tmp += strlen(proto_names[i].name);
-					mask = proto_names[i].type;
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(proto_names)) {
-				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
-				return -EINVAL;
-			}
-			count++;
-		}
-
-		if (enable)
-			type |= mask;
-		else if (disable)
-			type &= ~mask;
-		else
-			type = mask;
-	}
-
-	if (!count) {
-		IR_dprintk(1, "Protocol not specified\n");
-		return -EINVAL;
-	}
-
-	if (ir_dev->props && ir_dev->props->change_protocol) {
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    type);
-		if (rc < 0) {
-			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
-				   (long long)type);
-			return -EINVAL;
-		}
-	}
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-		ir_dev->rc_tab.ir_type = type;
-		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
-	} else {
-		ir_dev->raw->enabled_protocols = type;
-	}
-
-	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
-		   (long long)type);
-
-	return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...)					\
-	do {								\
-		int err = add_uevent_var(env, fmt, val);		\
-		if (err)						\
-			return err;					\
-	} while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
-	if (ir_dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
-	if (ir_dev->driver_name)
-		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
-	return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-		   show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
-	&dev_attr_protocols.attr,
-	NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
-	.attrs	= rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
-	&rc_dev_attr_grp,
-	NULL
-};
-
-static struct device_type rc_dev_type = {
-	.groups		= rc_dev_attr_groups,
-	.uevent		= rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int devno = find_first_zero_bit(&ir_core_dev_number,
-					IRRCV_NUM_DEVICES);
-
-	if (unlikely(devno < 0))
-		return devno;
-
-	ir_dev->dev.type = &rc_dev_type;
-	ir_dev->devno = devno;
-
-	ir_dev->dev.class = &ir_input_class;
-	ir_dev->dev.parent = input_dev->dev.parent;
-	input_dev->dev.parent = &ir_dev->dev;
-	dev_set_name(&ir_dev->dev, "rc%d", devno);
-	dev_set_drvdata(&ir_dev->dev, ir_dev);
-	return  device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev:	the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int rc;
-	const char *path;
-
-
-	rc = input_register_device(input_dev);
-	if (rc < 0) {
-		device_del(&ir_dev->dev);
-		return rc;
-	}
-
-	__module_get(THIS_MODULE);
-
-	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "%s: %s as %s\n",
-		dev_name(&ir_dev->dev),
-		input_dev->name ? input_dev->name : "Unspecified device",
-		path ? path : "N/A");
-	kfree(path);
-
-	set_bit(ir_dev->devno, &ir_core_dev_number);
-	return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- *			   /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	input_set_drvdata(input_dev, NULL);
-	clear_bit(ir_dev->devno, &ir_core_dev_number);
-	input_unregister_device(input_dev);
-	device_del(&ir_dev->dev);
-
-	module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
-	int rc = class_register(&ir_input_class);
-	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
-		return rc;
-	}
-
-	/* Initialize/load the decoders/keymap code that will be used */
-	ir_raw_init();
-	ir_rcmap_init();
-
-	return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
-	class_unregister(&ir_input_class);
-	ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
new file mode 100644
index 000000000000..81c936bd793f
--- /dev/null
+++ b/drivers/media/rc/rc-core-priv.h
@@ -0,0 +1,203 @@
+/*
+ * Remote Controller core raw events header
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _IR_RAW_EVENT
+#define _IR_RAW_EVENT
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <media/ir-core.h>
+
+struct ir_raw_handler {
+	struct list_head list;
+
+	u64 protocols; /* which are handled by this handler */
+	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+
+	/* These two should only be used by the lirc decoder */
+	int (*raw_register)(struct input_dev *input_dev);
+	int (*raw_unregister)(struct input_dev *input_dev);
+};
+
+struct ir_raw_event_ctrl {
+	struct list_head		list;		/* to keep track of raw clients */
+	struct task_struct		*thread;
+	spinlock_t			lock;
+	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
+	ktime_t				last_event;	/* when last event occurred */
+	enum raw_event_type		last_type;	/* last event type */
+	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
+	u64				enabled_protocols; /* enabled raw protocol decoders */
+
+	/* raw decoder state follows */
+	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
+	struct nec_dec {
+		int state;
+		unsigned count;
+		u32 bits;
+		bool is_nec_x;
+		bool necx_repeat;
+	} nec;
+	struct rc5_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc5;
+	struct rc6_dec {
+		int state;
+		u8 header;
+		u32 body;
+		bool toggle;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc6;
+	struct sony_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+	} sony;
+	struct jvc_dec {
+		int state;
+		u16 bits;
+		u16 old_bits;
+		unsigned count;
+		bool first;
+		bool toggle;
+	} jvc;
+	struct rc5_sz_dec {
+		int state;
+		u32 bits;
+		unsigned count;
+		unsigned wanted_bits;
+	} rc5_sz;
+	struct lirc_codec {
+		struct ir_input_dev *ir_dev;
+		struct lirc_driver *drv;
+		int carrier_low;
+
+		ktime_t gap_start;
+		u64 gap_duration;
+		bool gap;
+		bool send_timeout_reports;
+
+	} lirc;
+};
+
+/* macros for IR decoders */
+static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+	return d1 > (d2 - margin);
+}
+
+static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+	return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
+}
+
+static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
+{
+	return x->pulse != y->pulse;
+}
+
+static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
+{
+	if (duration > ev->duration)
+		ev->duration = 0;
+	else
+		ev->duration -= duration;
+}
+
+/* Returns true if event is normal pulse/space event */
+static inline bool is_timing_event(struct ir_raw_event ev)
+{
+	return !ev.carrier_report && !ev.reset;
+}
+
+#define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
+#define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
+/*
+ * Routines from ir-sysfs.c - Meant to be called only internally inside
+ * ir-core
+ */
+int ir_register_input(struct input_dev *input_dev);
+
+int ir_register_class(struct input_dev *input_dev);
+void ir_unregister_class(struct input_dev *input_dev);
+
+/*
+ * Routines from ir-raw-event.c to be used internally and by decoders
+ */
+u64 ir_raw_get_allowed_protocols(void);
+int ir_raw_event_register(struct input_dev *input_dev);
+void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_init(void);
+
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
+/*
+ * Decoder initialization code
+ *
+ * Those load logic are called during ir-core init, and automatically
+ * loads the compiled decoders for their usage with IR raw events
+ */
+
+/* from ir-nec-decoder.c */
+#ifdef CONFIG_IR_NEC_DECODER_MODULE
+#define load_nec_decode()	request_module("ir-nec-decoder")
+#else
+#define load_nec_decode()	0
+#endif
+
+/* from ir-rc5-decoder.c */
+#ifdef CONFIG_IR_RC5_DECODER_MODULE
+#define load_rc5_decode()	request_module("ir-rc5-decoder")
+#else
+#define load_rc5_decode()	0
+#endif
+
+/* from ir-rc6-decoder.c */
+#ifdef CONFIG_IR_RC6_DECODER_MODULE
+#define load_rc6_decode()	request_module("ir-rc6-decoder")
+#else
+#define load_rc6_decode()	0
+#endif
+
+/* from ir-jvc-decoder.c */
+#ifdef CONFIG_IR_JVC_DECODER_MODULE
+#define load_jvc_decode()	request_module("ir-jvc-decoder")
+#else
+#define load_jvc_decode()	0
+#endif
+
+/* from ir-sony-decoder.c */
+#ifdef CONFIG_IR_SONY_DECODER_MODULE
+#define load_sony_decode()	request_module("ir-sony-decoder")
+#else
+#define load_sony_decode()	0
+#endif
+
+/* from ir-lirc-codec.c */
+#ifdef CONFIG_IR_LIRC_CODEC_MODULE
+#define load_lirc_codec()	request_module("ir-lirc-codec")
+#else
+#define load_lirc_codec()	0
+#endif
+
+
+#endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
new file mode 100644
index 000000000000..d6de2e25315e
--- /dev/null
+++ b/drivers/media/rc/rc-main.c
@@ -0,0 +1,766 @@
+/* ir-keytable.c - handle IR scancode->keycode tables
+ *
+ * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rc-core-priv.h"
+
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE	256
+#define IR_TAB_MAX_SIZE	8192
+
+/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
+#define IR_KEYPRESS_TIMEOUT 250
+
+/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_tab:	the ir_scancode_table to initialize
+ * @name:	name to assign to the table
+ * @ir_type:	ir type to assign to the new table
+ * @size:	initial size of the table
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will initialize the ir_scancode_table and will allocate
+ * memory to hold at least the specified number elements.
+ */
+static int ir_create_table(struct ir_scancode_table *rc_tab,
+			   const char *name, u64 ir_type, size_t size)
+{
+	rc_tab->name = name;
+	rc_tab->ir_type = ir_type;
+	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
+	if (!rc_tab->scan)
+		return -ENOMEM;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_tab->size, rc_tab->alloc);
+	return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_tab:	the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct ir_scancode_table *rc_tab)
+{
+	rc_tab->size = 0;
+	kfree(rc_tab->scan);
+	rc_tab->scan = NULL;
+}
+
+/**
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_tab:	the ir_scancode_table to resize
+ * @gfp_flags:	gfp flags to use when allocating memory
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will shrink the ir_scancode_table if it has lots of
+ * unused entries and grow it if it is full.
+ */
+static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
+{
+	unsigned int oldalloc = rc_tab->alloc;
+	unsigned int newalloc = oldalloc;
+	struct ir_scancode *oldscan = rc_tab->scan;
+	struct ir_scancode *newscan;
+
+	if (rc_tab->size == rc_tab->len) {
+		/* All entries in use -> grow keytable */
+		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+			return -ENOMEM;
+
+		newalloc *= 2;
+		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+	}
+
+	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+		/* Less than 1/3 of entries in use -> shrink keytable */
+		newalloc /= 2;
+		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+	}
+
+	if (newalloc == oldalloc)
+		return 0;
+
+	newscan = kmalloc(newalloc, gfp_flags);
+	if (!newscan) {
+		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+		return -ENOMEM;
+	}
+
+	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
+	rc_tab->scan = newscan;
+	rc_tab->alloc = newalloc;
+	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+	kfree(oldscan);
+	return 0;
+}
+
+/**
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @rc_tab:	scancode table to be adjusted
+ * @index:	index of the mapping that needs to be updated
+ * @keycode:	the desired keycode
+ * @return:	previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycopde mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct input_dev *dev,
+				      struct ir_scancode_table *rc_tab,
+				      unsigned int index,
+				      unsigned int new_keycode)
+{
+	int old_keycode = rc_tab->scan[index].keycode;
+	int i;
+
+	/* Did the user wish to remove the mapping? */
+	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+			   index, rc_tab->scan[index].scancode);
+		rc_tab->len--;
+		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
+			(rc_tab->len - index) * sizeof(struct ir_scancode));
+	} else {
+		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+			   index,
+			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
+			   rc_tab->scan[index].scancode, new_keycode);
+		rc_tab->scan[index].keycode = new_keycode;
+		__set_bit(new_keycode, dev->keybit);
+	}
+
+	if (old_keycode != KEY_RESERVED) {
+		/* A previous mapping was updated... */
+		__clear_bit(old_keycode, dev->keybit);
+		/* ... but another scancode might use the same keycode */
+		for (i = 0; i < rc_tab->len; i++) {
+			if (rc_tab->scan[i].keycode == old_keycode) {
+				__set_bit(old_keycode, dev->keybit);
+				break;
+			}
+		}
+
+		/* Possibly shrink the keytable, failure is not a problem */
+		ir_resize_table(rc_tab, GFP_ATOMIC);
+	}
+
+	return old_keycode;
+}
+
+/**
+ * ir_locate_scancode() - set a keycode in the scancode->keycode table
+ * @ir_dev:	the struct ir_input_dev device descriptor
+ * @rc_tab:	scancode table to be searched
+ * @scancode:	the desired scancode
+ * @resize:	controls whether we allowed to resize the table to
+ *		accomodate not yet present scancodes
+ * @return:	index of the mapping containing scancode in question
+ *		or -1U in case of failure.
+ *
+ * This routine is used to locate given scancode in ir_scancode_table.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
+ */
+static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+					  struct ir_scancode_table *rc_tab,
+					  unsigned int scancode,
+					  bool resize)
+{
+	unsigned int i;
+
+	/*
+	 * Unfortunately, some hardware-based IR decoders don't provide
+	 * all bits for the complete IR code. In general, they provide only
+	 * the command part of the IR code. Yet, as it is possible to replace
+	 * the provided IR with another one, it is needed to allow loading
+	 * IR tables from other remotes. So,
+	 */
+	if (ir_dev->props && ir_dev->props->scanmask)
+		scancode &= ir_dev->props->scanmask;
+
+	/* First check if we already have a mapping for this ir command */
+	for (i = 0; i < rc_tab->len; i++) {
+		if (rc_tab->scan[i].scancode == scancode)
+			return i;
+
+		/* Keytable is sorted from lowest to highest scancode */
+		if (rc_tab->scan[i].scancode >= scancode)
+			break;
+	}
+
+	/* No previous mapping found, we might need to grow the table */
+	if (rc_tab->size == rc_tab->len) {
+		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+			return -1U;
+	}
+
+	/* i is the proper index to insert our new keycode */
+	if (i < rc_tab->len)
+		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
+			(rc_tab->len - i) * sizeof(struct ir_scancode));
+	rc_tab->scan[i].scancode = scancode;
+	rc_tab->scan[i].keycode = KEY_RESERVED;
+	rc_tab->len++;
+
+	return i;
+}
+
+/**
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	result
+ * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ */
+static int ir_setkeycode(struct input_dev *dev,
+			 const struct input_keymap_entry *ke,
+			 unsigned int *old_keycode)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int index;
+	unsigned int scancode;
+	int retval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+		if (index >= rc_tab->len) {
+			retval = -EINVAL;
+			goto out;
+		}
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+		if (index >= rc_tab->len) {
+			retval = -ENOMEM;
+			goto out;
+		}
+	}
+
+	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+
+out:
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	return retval;
+}
+
+/**
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @to:		the struct ir_scancode_table to copy entries to
+ * @from:	the struct ir_scancode_table to copy entries from
+ * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle table initialization.
+ */
+static int ir_setkeytable(struct ir_input_dev *ir_dev,
+			  const struct ir_scancode_table *from)
+{
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int i, index;
+	int rc;
+
+	rc = ir_create_table(&ir_dev->rc_tab,
+			     from->name, from->ir_type, from->size);
+	if (rc)
+		return rc;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_tab->size, rc_tab->alloc);
+
+	for (i = 0; i < from->size; i++) {
+		index = ir_establish_scancode(ir_dev, rc_tab,
+					      from->scan[i].scancode, false);
+		if (index >= rc_tab->len) {
+			rc = -ENOMEM;
+			break;
+		}
+
+		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+				  from->scan[i].keycode);
+	}
+
+	if (rc)
+		ir_free_table(rc_tab);
+
+	return rc;
+}
+
+/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_tab:	the &struct ir_scancode_table to search
+ * @scancode:	scancode to look for in the table
+ * @return:	index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+					  unsigned int scancode)
+{
+	int start = 0;
+	int end = rc_tab->len - 1;
+	int mid;
+
+	while (start <= end) {
+		mid = (start + end) / 2;
+		if (rc_tab->scan[mid].scancode < scancode)
+			start = mid + 1;
+		else if (rc_tab->scan[mid].scancode > scancode)
+			end = mid - 1;
+		else
+			return mid;
+	}
+
+	return -1U;
+}
+
+/**
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
+ * @dev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	used to return the keycode, if found, or KEY_RESERVED
+ * @return:	always returns zero.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ */
+static int ir_getkeycode(struct input_dev *dev,
+			 struct input_keymap_entry *ke)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct ir_scancode *entry;
+	unsigned long flags;
+	unsigned int index;
+	unsigned int scancode;
+	int retval;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_lookup_by_scancode(rc_tab, scancode);
+	}
+
+	if (index >= rc_tab->len) {
+		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+				   scancode);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	entry = &rc_tab->scan[index];
+
+	ke->index = index;
+	ke->keycode = entry->keycode;
+	ke->len = sizeof(entry->scancode);
+	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+	retval = 0;
+
+out:
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	return retval;
+}
+
+/**
+ * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @scancode:	the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	unsigned int keycode;
+	unsigned int index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_tab->lock, flags);
+
+	index = ir_lookup_by_scancode(rc_tab, scancode);
+	keycode = index < rc_tab->len ?
+			rc_tab->scan[index].keycode : KEY_RESERVED;
+
+	spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+	if (keycode != KEY_RESERVED)
+		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+			   dev->name, scancode, keycode);
+
+	return keycode;
+}
+EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+
+/**
+ * ir_do_keyup() - internal function to signal the release of a keypress
+ * @ir:         the struct ir_input_dev descriptor of the device
+ *
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keyup(struct ir_input_dev *ir)
+{
+	if (!ir->keypressed)
+		return;
+
+	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
+	input_report_key(ir->input_dev, ir->last_keycode, 0);
+	input_sync(ir->input_dev);
+	ir->keypressed = false;
+}
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev:        the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keyup(ir);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keyup);
+
+/**
+ * ir_timer_keyup() - generates a keyup event after a timeout
+ * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
+ *
+ * This routine will generate a keyup event some time after a keydown event
+ * is generated when no further activity has been detected.
+ */
+static void ir_timer_keyup(unsigned long cookie)
+{
+	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+	unsigned long flags;
+
+	/*
+	 * ir->keyup_jiffies is used to prevent a race condition if a
+	 * hardware interrupt occurs at this point and the keyup timer
+	 * event is moved further into the future as a result.
+	 *
+	 * The timer will then be reactivated and this function called
+	 * again in the future. We need to exit gracefully in that case
+	 * to allow the input subsystem to do its auto-repeat magic or
+	 * a keyup event might follow immediately after the keydown.
+	 */
+	spin_lock_irqsave(&ir->keylock, flags);
+	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
+		ir_do_keyup(ir);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+
+/**
+ * ir_repeat() - notifies the IR core that a key is still pressed
+ * @dev:        the struct input_dev descriptor of the device
+ *
+ * This routine is used by IR decoders when a repeat message which does
+ * not include the necessary bits to reproduce the scancode has been
+ * received.
+ */
+void ir_repeat(struct input_dev *dev)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+
+	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
+	if (!ir->keypressed)
+		goto out;
+
+	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+
+out:
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_repeat);
+
+/**
+ * ir_do_keydown() - internal function to process a keypress
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode of the keypress
+ * @keycode:    the keycode of the keypress
+ * @toggle:     the toggle value of the keypress
+ *
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+			  u32 keycode, u8 toggle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+
+	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
+	/* Repeat event? */
+	if (ir->keypressed &&
+	    ir->last_scancode == scancode &&
+	    ir->last_toggle == toggle)
+		return;
+
+	/* Release old keypress */
+	ir_do_keyup(ir);
+
+	ir->last_scancode = scancode;
+	ir->last_toggle = toggle;
+	ir->last_keycode = keycode;
+
+	if (keycode == KEY_RESERVED)
+		return;
+
+	/* Register a keypress */
+	ir->keypressed = true;
+	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
+		   dev->name, keycode, scancode);
+	input_report_key(dev, ir->last_keycode, 1);
+	input_sync(dev);
+}
+
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+
+	if (ir->keypressed) {
+		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+	}
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown);
+
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ *                          an automatic keyup event at a later time
+ * @dev:        the struct input_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	struct ir_input_dev *ir = input_get_drvdata(dev);
+	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&ir->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+	spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
+static int ir_open(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	return ir_dev->props->open(ir_dev->props->priv);
+}
+
+static void ir_close(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	ir_dev->props->close(ir_dev->props->priv);
+}
+
+/**
+ * __ir_input_register() - sets the IR keycode table and add the handlers
+ *			    for keymap table get/set
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
+ *
+ * This routine is used to initialize the input infrastructure
+ * to work with an IR.
+ * It will register the input/evdev interface for the device and
+ * register the syfs code for IR class
+ */
+int __ir_input_register(struct input_dev *input_dev,
+		      const struct ir_scancode_table *rc_tab,
+		      struct ir_dev_props *props,
+		      const char *driver_name)
+{
+	struct ir_input_dev *ir_dev;
+	int rc;
+
+	if (rc_tab->scan == NULL || !rc_tab->size)
+		return -EINVAL;
+
+	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
+	if (!ir_dev)
+		return -ENOMEM;
+
+	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
+	if (!ir_dev->driver_name) {
+		rc = -ENOMEM;
+		goto out_dev;
+	}
+
+	input_dev->getkeycode_new = ir_getkeycode;
+	input_dev->setkeycode_new = ir_setkeycode;
+	input_set_drvdata(input_dev, ir_dev);
+	ir_dev->input_dev = input_dev;
+
+	spin_lock_init(&ir_dev->rc_tab.lock);
+	spin_lock_init(&ir_dev->keylock);
+	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
+
+	if (props) {
+		ir_dev->props = props;
+		if (props->open)
+			input_dev->open = ir_open;
+		if (props->close)
+			input_dev->close = ir_close;
+	}
+
+	set_bit(EV_KEY, input_dev->evbit);
+	set_bit(EV_REP, input_dev->evbit);
+	set_bit(EV_MSC, input_dev->evbit);
+	set_bit(MSC_SCAN, input_dev->mscbit);
+
+	rc = ir_setkeytable(ir_dev, rc_tab);
+	if (rc)
+		goto out_name;
+
+	rc = ir_register_class(input_dev);
+	if (rc < 0)
+		goto out_table;
+
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+			rc = ir_raw_event_register(input_dev);
+			if (rc < 0)
+				goto out_event;
+		}
+
+	rc = ir_register_input(input_dev);
+	if (rc < 0)
+		goto out_event;
+
+	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+		   driver_name, rc_tab->name,
+		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+			" in raw mode" : "");
+
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes.
+	 */
+	input_dev->rep[REP_DELAY] = 500;
+
+	return 0;
+
+out_event:
+	ir_unregister_class(input_dev);
+out_table:
+	ir_free_table(&ir_dev->rc_tab);
+out_name:
+	kfree(ir_dev->driver_name);
+out_dev:
+	kfree(ir_dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(__ir_input_register);
+
+/**
+ * ir_input_unregister() - unregisters IR and frees resources
+ * @input_dev:	the struct input_dev descriptor of the device
+
+ * This routine is used to free memory and de-register interfaces.
+ */
+void ir_input_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	if (!ir_dev)
+		return;
+
+	IR_dprintk(1, "Freed keycode table\n");
+
+	del_timer_sync(&ir_dev->timer_keyup);
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+			ir_raw_event_unregister(input_dev);
+
+	ir_free_table(&ir_dev->rc_tab);
+
+	ir_unregister_class(input_dev);
+
+	kfree(ir_dev->driver_name);
+	kfree(ir_dev);
+}
+EXPORT_SYMBOL_GPL(ir_input_unregister);
+
+int ir_core_debug;    /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(ir_core_debug);
+module_param_named(debug, ir_core_debug, int, 0644);
+
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
new file mode 100644
index 000000000000..d6c556e3f0d8
--- /dev/null
+++ b/drivers/media/rc/rc-raw.c
@@ -0,0 +1,382 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include "rc-core-priv.h"
+
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE      512
+
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
+/* Used to handle IR raw handler extensions */
+static DEFINE_MUTEX(ir_raw_handler_lock);
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
+
+#ifdef MODULE
+/* Used to load the decoders */
+static struct work_struct wq_load;
+#endif
+
+static int ir_raw_event_thread(void *data)
+{
+	struct ir_raw_event ev;
+	struct ir_raw_handler *handler;
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+	int retval;
+
+	while (!kthread_should_stop()) {
+
+		spin_lock_irq(&raw->lock);
+		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+
+		if (!retval) {
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			if (kthread_should_stop())
+				set_current_state(TASK_RUNNING);
+
+			spin_unlock_irq(&raw->lock);
+			schedule();
+			continue;
+		}
+
+		spin_unlock_irq(&raw->lock);
+
+
+		BUG_ON(retval != sizeof(ev));
+
+		mutex_lock(&ir_raw_handler_lock);
+		list_for_each_entry(handler, &ir_raw_handler_list, list)
+			handler->decode(raw->input_dev, ev);
+		raw->prev_ev = ev;
+		mutex_unlock(&ir_raw_handler_lock);
+	}
+
+	return 0;
+}
+
+/**
+ * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
+ * @input_dev:	the struct input_dev device descriptor
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This routine (which may be called from an interrupt context) stores a
+ * pulse/space duration for the raw ir decoding state machines. Pulses are
+ * signalled as positive values and spaces as negative values. A zero value
+ * will reset the decoding state machines.
+ */
+int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+
+	if (!ir->raw)
+		return -EINVAL;
+
+	IR_dprintk(2, "sample: (%05dus %s)\n",
+		TO_US(ev->duration), TO_STR(ev->pulse));
+
+	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store);
+
+/**
+ * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines. This is used by
+ * hardware which does not provide durations directly but only interrupts
+ * (or similar events) on state change.
+ */
+int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+{
+	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
+	ktime_t			now;
+	s64			delta; /* ns */
+	struct ir_raw_event	ev;
+	int			rc = 0;
+
+	if (!ir->raw)
+		return -EINVAL;
+
+	now = ktime_get();
+	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+	/* Check for a long duration since last event or if we're
+	 * being called for the first time, note that delta can't
+	 * possibly be negative.
+	 */
+	ev.duration = 0;
+	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+		type |= IR_START_EVENT;
+	else
+		ev.duration = delta;
+
+	if (type & IR_START_EVENT)
+		ir_raw_event_reset(input_dev);
+	else if (ir->raw->last_type & IR_SPACE) {
+		ev.pulse = false;
+		rc = ir_raw_event_store(input_dev, &ev);
+	} else if (ir->raw->last_type & IR_PULSE) {
+		ev.pulse = true;
+		rc = ir_raw_event_store(input_dev, &ev);
+	} else
+		return 0;
+
+	ir->raw->last_event = now;
+	ir->raw->last_type = type;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, false);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout) {
+		ir_raw_event_set_idle(input_dev, true);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+/**
+ * ir_raw_event_set_idle() - hint the ir core if device is receiving
+ * IR data or not
+ * @input_dev: the struct input_dev device descriptor
+ * @idle: the hint value
+ */
+void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!ir->props || !ir->raw)
+		return;
+
+	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
+
+	if (idle) {
+		raw->this_ev.timeout = true;
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		init_ir_raw_event(&raw->this_ev);
+	}
+
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
+ * ir_raw_event_handle() - schedules the decoding of stored ir data
+ * @input_dev:	the struct input_dev device descriptor
+ *
+ * This routine will signal the workqueue to start decoding stored ir data.
+ */
+void ir_raw_event_handle(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	unsigned long flags;
+
+	if (!ir->raw)
+		return;
+
+	spin_lock_irqsave(&ir->raw->lock, flags);
+	wake_up_process(ir->raw->thread);
+	spin_unlock_irqrestore(&ir->raw->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_handle);
+
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+	u64 protocols;
+	mutex_lock(&ir_raw_handler_lock);
+	protocols = available_protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+	return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	int rc;
+	struct ir_raw_handler *handler;
+
+	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
+	if (!ir->raw)
+		return -ENOMEM;
+
+	ir->raw->input_dev = input_dev;
+
+	ir->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+			 GFP_KERNEL);
+	if (rc < 0) {
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return rc;
+	}
+
+	spin_lock_init(&ir->raw->lock);
+	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+			"rc%u",  (unsigned int)ir->devno);
+
+	if (IS_ERR(ir->raw->thread)) {
+		int ret = PTR_ERR(ir->raw->thread);
+
+		kfree(ir->raw);
+		ir->raw = NULL;
+		return ret;
+	}
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir->raw->list, &ir_raw_client_list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_register)
+			handler->raw_register(ir->raw->input_dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+
+void ir_raw_event_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_handler *handler;
+
+	if (!ir->raw)
+		return;
+
+	kthread_stop(ir->raw->thread);
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&ir->raw->list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_unregister)
+			handler->raw_unregister(ir->raw->input_dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	kfifo_free(&ir->raw->kfifo);
+	kfree(ir->raw);
+	ir->raw = NULL;
+}
+
+/*
+ * Extension interface - used to register the IR decoders
+ */
+
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+	if (ir_raw_handler->raw_register)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_register(raw->input_dev);
+	available_protocols |= ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ir_raw_handler_register);
+
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&ir_raw_handler->list);
+	if (ir_raw_handler->raw_unregister)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_unregister(raw->input_dev);
+	available_protocols &= ~ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+}
+EXPORT_SYMBOL(ir_raw_handler_unregister);
+
+#ifdef MODULE
+static void init_decoders(struct work_struct *work)
+{
+	/* Load the decoder modules */
+
+	load_nec_decode();
+	load_rc5_decode();
+	load_rc6_decode();
+	load_jvc_decode();
+	load_sony_decode();
+	load_lirc_codec();
+
+	/* If needed, we may later add some init code. In this case,
+	   it is needed to change the CONFIG_MODULE test at ir-core.h
+	 */
+}
+#endif
+
+void ir_raw_init(void)
+{
+#ifdef MODULE
+	INIT_WORK(&wq_load, init_decoders);
+	schedule_work(&wq_load);
+#endif
+}
diff --git a/drivers/media/rc/rc-sysfs.c b/drivers/media/rc/rc-sysfs.c
new file mode 100644
index 000000000000..a5f81d107ed4
--- /dev/null
+++ b/drivers/media/rc/rc-sysfs.c
@@ -0,0 +1,362 @@
+/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include "rc-core-priv.h"
+
+#define IRRCV_NUM_DEVICES	256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+	.name		= "rc",
+	.devnode	= ir_devnode,
+};
+
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ IR_TYPE_UNKNOWN,	"unknown"	},
+	{ IR_TYPE_RC5,		"rc-5"		},
+	{ IR_TYPE_NEC,		"nec"		},
+	{ IR_TYPE_RC6,		"rc-6"		},
+	{ IR_TYPE_JVC,		"jvc"		},
+	{ IR_TYPE_SONY,		"sony"		},
+	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ IR_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *d,
+			      struct device_attribute *mattr, char *buf)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	u64 allowed, enabled;
+	char *tmp = buf;
+	int i;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = ir_dev->rc_tab.ir_type;
+		allowed = ir_dev->props->allowed_protos;
+	} else if (ir_dev->raw) {
+		enabled = ir_dev->raw->enabled_protocols;
+		allowed = ir_raw_get_allowed_protocols();
+	} else
+		return sprintf(tmp, "[builtin]\n");
+
+	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+		   (long long)allowed,
+		   (long long)enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
+
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+	return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *d,
+			       struct device_attribute *mattr,
+			       const char *data,
+			       size_t len)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	bool enable, disable;
+	const char *tmp;
+	u64 type;
+	u64 mask;
+	int rc, i, count = 0;
+	unsigned long flags;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+		type = ir_dev->rc_tab.ir_type;
+	else if (ir_dev->raw)
+		type = ir_dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
+
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
+
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
+	}
+
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
+		return -EINVAL;
+	}
+
+	if (ir_dev->props && ir_dev->props->change_protocol) {
+		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+						    type);
+		if (rc < 0) {
+			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+				   (long long)type);
+			return -EINVAL;
+		}
+	}
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+		ir_dev->rc_tab.ir_type = type;
+		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	} else {
+		ir_dev->raw->enabled_protocols = type;
+	}
+
+	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+		   (long long)type);
+
+	return len;
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...)					\
+	do {								\
+		int err = add_uevent_var(env, fmt, val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+
+	if (ir_dev->rc_tab.name)
+		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
+	if (ir_dev->driver_name)
+		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+
+	return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+		   show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+	&dev_attr_protocols.attr,
+	NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+	.attrs	= rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+	&rc_dev_attr_grp,
+	NULL
+};
+
+static struct device_type rc_dev_type = {
+	.groups		= rc_dev_attr_groups,
+	.uevent		= rc_dev_uevent,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+int ir_register_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int devno = find_first_zero_bit(&ir_core_dev_number,
+					IRRCV_NUM_DEVICES);
+
+	if (unlikely(devno < 0))
+		return devno;
+
+	ir_dev->dev.type = &rc_dev_type;
+	ir_dev->devno = devno;
+
+	ir_dev->dev.class = &ir_input_class;
+	ir_dev->dev.parent = input_dev->dev.parent;
+	input_dev->dev.parent = &ir_dev->dev;
+	dev_set_name(&ir_dev->dev, "rc%d", devno);
+	dev_set_drvdata(&ir_dev->dev, ir_dev);
+	return  device_register(&ir_dev->dev);
+};
+
+/**
+ * ir_register_input - registers ir input device with input subsystem
+ * @input_dev:	the struct input_dev descriptor of the device
+ */
+
+int ir_register_input(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int rc;
+	const char *path;
+
+
+	rc = input_register_device(input_dev);
+	if (rc < 0) {
+		device_del(&ir_dev->dev);
+		return rc;
+	}
+
+	__module_get(THIS_MODULE);
+
+	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+	printk(KERN_INFO "%s: %s as %s\n",
+		dev_name(&ir_dev->dev),
+		input_dev->name ? input_dev->name : "Unspecified device",
+		path ? path : "N/A");
+	kfree(path);
+
+	set_bit(ir_dev->devno, &ir_core_dev_number);
+	return 0;
+}
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ *			   /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+void ir_unregister_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	input_set_drvdata(input_dev, NULL);
+	clear_bit(ir_dev->devno, &ir_core_dev_number);
+	input_unregister_device(input_dev);
+	device_del(&ir_dev->dev);
+
+	module_put(THIS_MODULE);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init ir_core_init(void)
+{
+	int rc = class_register(&ir_input_class);
+	if (rc) {
+		printk(KERN_ERR "ir_core: unable to register rc class\n");
+		return rc;
+	}
+
+	/* Initialize/load the decoders/keymap code that will be used */
+	ir_raw_init();
+	ir_rcmap_init();
+
+	return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
-- 
cgit v1.2.3


From bc2a6c5719efd74ce841ad0f0c9b6ea2590da6da Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 9 Nov 2010 23:18:24 -0300
Subject: [media] rc-core: Merge rc-sysfs.c into rc-main.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Makefile   |   2 +-
 drivers/media/rc/rc-main.c  | 349 +++++++++++++++++++++++++++++++++++++++++-
 drivers/media/rc/rc-sysfs.c | 362 --------------------------------------------
 3 files changed, 348 insertions(+), 365 deletions(-)
 delete mode 100644 drivers/media/rc/rc-sysfs.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 479a8f4c3a9e..5a1112cfe8ec 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,5 +1,5 @@
 ir-common-objs  := ir-functions.o
-rc-core-objs	:= rc-main.o rc-sysfs.o rc-raw.o rc-map.o
+rc-core-objs	:= rc-main.o rc-raw.o rc-map.o
 
 obj-y += keymaps/
 
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d6de2e25315e..d7726776f937 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1,6 +1,6 @@
-/* ir-keytable.c - handle IR scancode->keycode tables
+/* rc-core.c - handle IR scancode->keycode tables
  *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
  *
  * This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -15,8 +15,14 @@
 
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 #include "rc-core-priv.h"
 
+#define IRRCV_NUM_DEVICES	256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
 /* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
 #define IR_TAB_MIN_SIZE	256
 #define IR_TAB_MAX_SIZE	8192
@@ -758,6 +764,345 @@ void ir_input_unregister(struct input_dev *input_dev)
 }
 EXPORT_SYMBOL_GPL(ir_input_unregister);
 
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+	.name		= "rc",
+	.devnode	= ir_devnode,
+};
+
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ IR_TYPE_UNKNOWN,	"unknown"	},
+	{ IR_TYPE_RC5,		"rc-5"		},
+	{ IR_TYPE_NEC,		"nec"		},
+	{ IR_TYPE_RC6,		"rc-6"		},
+	{ IR_TYPE_JVC,		"jvc"		},
+	{ IR_TYPE_SONY,		"sony"		},
+	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ IR_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *d,
+			      struct device_attribute *mattr, char *buf)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	u64 allowed, enabled;
+	char *tmp = buf;
+	int i;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = ir_dev->rc_tab.ir_type;
+		allowed = ir_dev->props->allowed_protos;
+	} else if (ir_dev->raw) {
+		enabled = ir_dev->raw->enabled_protocols;
+		allowed = ir_raw_get_allowed_protocols();
+	} else
+		return sprintf(tmp, "[builtin]\n");
+
+	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+		   (long long)allowed,
+		   (long long)enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
+
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+	return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @d:		the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *d,
+			       struct device_attribute *mattr,
+			       const char *data,
+			       size_t len)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	bool enable, disable;
+	const char *tmp;
+	u64 type;
+	u64 mask;
+	int rc, i, count = 0;
+	unsigned long flags;
+
+	/* Device is being removed */
+	if (!ir_dev)
+		return -EINVAL;
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+		type = ir_dev->rc_tab.ir_type;
+	else if (ir_dev->raw)
+		type = ir_dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
+
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
+
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
+	}
+
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
+		return -EINVAL;
+	}
+
+	if (ir_dev->props && ir_dev->props->change_protocol) {
+		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+						    type);
+		if (rc < 0) {
+			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+				   (long long)type);
+			return -EINVAL;
+		}
+	}
+
+	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+		ir_dev->rc_tab.ir_type = type;
+		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	} else {
+		ir_dev->raw->enabled_protocols = type;
+	}
+
+	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+		   (long long)type);
+
+	return len;
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...)					\
+	do {								\
+		int err = add_uevent_var(env, fmt, val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+
+	if (ir_dev->rc_tab.name)
+		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
+	if (ir_dev->driver_name)
+		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+
+	return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+		   show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+	&dev_attr_protocols.attr,
+	NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+	.attrs	= rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+	&rc_dev_attr_grp,
+	NULL
+};
+
+static struct device_type rc_dev_type = {
+	.groups		= rc_dev_attr_groups,
+	.uevent		= rc_dev_uevent,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+int ir_register_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int devno = find_first_zero_bit(&ir_core_dev_number,
+					IRRCV_NUM_DEVICES);
+
+	if (unlikely(devno < 0))
+		return devno;
+
+	ir_dev->dev.type = &rc_dev_type;
+	ir_dev->devno = devno;
+
+	ir_dev->dev.class = &ir_input_class;
+	ir_dev->dev.parent = input_dev->dev.parent;
+	input_dev->dev.parent = &ir_dev->dev;
+	dev_set_name(&ir_dev->dev, "rc%d", devno);
+	dev_set_drvdata(&ir_dev->dev, ir_dev);
+	return  device_register(&ir_dev->dev);
+};
+
+/**
+ * ir_register_input - registers ir input device with input subsystem
+ * @input_dev:	the struct input_dev descriptor of the device
+ */
+
+int ir_register_input(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	int rc;
+	const char *path;
+
+
+	rc = input_register_device(input_dev);
+	if (rc < 0) {
+		device_del(&ir_dev->dev);
+		return rc;
+	}
+
+	__module_get(THIS_MODULE);
+
+	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+	printk(KERN_INFO "%s: %s as %s\n",
+		dev_name(&ir_dev->dev),
+		input_dev->name ? input_dev->name : "Unspecified device",
+		path ? path : "N/A");
+	kfree(path);
+
+	set_bit(ir_dev->devno, &ir_core_dev_number);
+	return 0;
+}
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ *			   /sys/class/rc/rc?
+ * @input_dev:	the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+void ir_unregister_class(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	input_set_drvdata(input_dev, NULL);
+	clear_bit(ir_dev->devno, &ir_core_dev_number);
+	input_unregister_device(input_dev);
+	device_del(&ir_dev->dev);
+
+	module_put(THIS_MODULE);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init ir_core_init(void)
+{
+	int rc = class_register(&ir_input_class);
+	if (rc) {
+		printk(KERN_ERR "ir_core: unable to register rc class\n");
+		return rc;
+	}
+
+	/* Initialize/load the decoders/keymap code that will be used */
+	ir_raw_init();
+	ir_rcmap_init();
+
+	return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+	class_unregister(&ir_input_class);
+	ir_rcmap_cleanup();
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
+
 int ir_core_debug;    /* ir_debug level (0,1,2) */
 EXPORT_SYMBOL_GPL(ir_core_debug);
 module_param_named(debug, ir_core_debug, int, 0644);
diff --git a/drivers/media/rc/rc-sysfs.c b/drivers/media/rc/rc-sysfs.c
deleted file mode 100644
index a5f81d107ed4..000000000000
--- a/drivers/media/rc/rc-sysfs.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "rc-core-priv.h"
-
-#define IRRCV_NUM_DEVICES	256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
-	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
-	.name		= "rc",
-	.devnode	= ir_devnode,
-};
-
-static struct {
-	u64	type;
-	char	*name;
-} proto_names[] = {
-	{ IR_TYPE_UNKNOWN,	"unknown"	},
-	{ IR_TYPE_RC5,		"rc-5"		},
-	{ IR_TYPE_NEC,		"nec"		},
-	{ IR_TYPE_RC6,		"rc-6"		},
-	{ IR_TYPE_JVC,		"jvc"		},
-	{ IR_TYPE_SONY,		"sony"		},
-	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ IR_TYPE_LIRC,		"lirc"		},
-};
-
-#define PROTO_NONE	"none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
-			      struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 allowed, enabled;
-	char *tmp = buf;
-	int i;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = ir_dev->rc_tab.ir_type;
-		allowed = ir_dev->props->allowed_protos;
-	} else if (ir_dev->raw) {
-		enabled = ir_dev->raw->enabled_protocols;
-		allowed = ir_raw_get_allowed_protocols();
-	} else
-		return sprintf(tmp, "[builtin]\n");
-
-	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
-		   (long long)allowed,
-		   (long long)enabled);
-
-	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-		if (allowed & enabled & proto_names[i].type)
-			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
-		else if (allowed & proto_names[i].type)
-			tmp += sprintf(tmp, "%s ", proto_names[i].name);
-	}
-
-	if (tmp != buf)
-		tmp--;
-	*tmp = '\n';
-	return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the input buffer
- * @len:	length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
-			       struct device_attribute *mattr,
-			       const char *data,
-			       size_t len)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	bool enable, disable;
-	const char *tmp;
-	u64 type;
-	u64 mask;
-	int rc, i, count = 0;
-	unsigned long flags;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else if (ir_dev->raw)
-		type = ir_dev->raw->enabled_protocols;
-	else {
-		IR_dprintk(1, "Protocol switching not supported\n");
-		return -EINVAL;
-	}
-
-	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
-		if (!*tmp)
-			break;
-
-		if (*tmp == '+') {
-			enable = true;
-			disable = false;
-			tmp++;
-		} else if (*tmp == '-') {
-			enable = false;
-			disable = true;
-			tmp++;
-		} else {
-			enable = false;
-			disable = false;
-		}
-
-		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
-			tmp += sizeof(PROTO_NONE);
-			mask = 0;
-			count++;
-		} else {
-			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
-					tmp += strlen(proto_names[i].name);
-					mask = proto_names[i].type;
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(proto_names)) {
-				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
-				return -EINVAL;
-			}
-			count++;
-		}
-
-		if (enable)
-			type |= mask;
-		else if (disable)
-			type &= ~mask;
-		else
-			type = mask;
-	}
-
-	if (!count) {
-		IR_dprintk(1, "Protocol not specified\n");
-		return -EINVAL;
-	}
-
-	if (ir_dev->props && ir_dev->props->change_protocol) {
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    type);
-		if (rc < 0) {
-			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
-				   (long long)type);
-			return -EINVAL;
-		}
-	}
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-		ir_dev->rc_tab.ir_type = type;
-		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
-	} else {
-		ir_dev->raw->enabled_protocols = type;
-	}
-
-	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
-		   (long long)type);
-
-	return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...)					\
-	do {								\
-		int err = add_uevent_var(env, fmt, val);		\
-		if (err)						\
-			return err;					\
-	} while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
-	if (ir_dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
-	if (ir_dev->driver_name)
-		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
-	return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-		   show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
-	&dev_attr_protocols.attr,
-	NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
-	.attrs	= rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
-	&rc_dev_attr_grp,
-	NULL
-};
-
-static struct device_type rc_dev_type = {
-	.groups		= rc_dev_attr_groups,
-	.uevent		= rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int devno = find_first_zero_bit(&ir_core_dev_number,
-					IRRCV_NUM_DEVICES);
-
-	if (unlikely(devno < 0))
-		return devno;
-
-	ir_dev->dev.type = &rc_dev_type;
-	ir_dev->devno = devno;
-
-	ir_dev->dev.class = &ir_input_class;
-	ir_dev->dev.parent = input_dev->dev.parent;
-	input_dev->dev.parent = &ir_dev->dev;
-	dev_set_name(&ir_dev->dev, "rc%d", devno);
-	dev_set_drvdata(&ir_dev->dev, ir_dev);
-	return  device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev:	the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int rc;
-	const char *path;
-
-
-	rc = input_register_device(input_dev);
-	if (rc < 0) {
-		device_del(&ir_dev->dev);
-		return rc;
-	}
-
-	__module_get(THIS_MODULE);
-
-	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "%s: %s as %s\n",
-		dev_name(&ir_dev->dev),
-		input_dev->name ? input_dev->name : "Unspecified device",
-		path ? path : "N/A");
-	kfree(path);
-
-	set_bit(ir_dev->devno, &ir_core_dev_number);
-	return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- *			   /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	input_set_drvdata(input_dev, NULL);
-	clear_bit(ir_dev->devno, &ir_core_dev_number);
-	input_unregister_device(input_dev);
-	device_del(&ir_dev->dev);
-
-	module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
-	int rc = class_register(&ir_input_class);
-	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
-		return rc;
-	}
-
-	/* Initialize/load the decoders/keymap code that will be used */
-	ir_raw_init();
-	ir_rcmap_init();
-
-	return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
-	class_unregister(&ir_input_class);
-	ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
-- 
cgit v1.2.3


From 631493ecacd81f1af74de459c1d16f7ffa6c82c0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 9 Nov 2010 23:44:27 -0300
Subject: [media] rc-core: merge rc-map.c into rc-main.c

With this change, all rc-core functions are into just one file, except
for the rc-raw specific functions.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Makefile  |   2 +-
 drivers/media/rc/rc-main.c |  94 ++++++++++++++++++++++++++++++++++++++-
 drivers/media/rc/rc-map.c  | 107 ---------------------------------------------
 3 files changed, 94 insertions(+), 109 deletions(-)
 delete mode 100644 drivers/media/rc/rc-map.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 5a1112cfe8ec..1eb24e6bc55c 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,5 +1,5 @@
 ir-common-objs  := ir-functions.o
-rc-core-objs	:= rc-main.o rc-raw.o rc-map.o
+rc-core-objs	:= rc-main.o rc-raw.o
 
 obj-y += keymaps/
 
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d7726776f937..afcf0a88464d 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -12,7 +12,9 @@
  *  GNU General Public License for more details.
  */
 
-
+#include <media/ir-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/device.h>
@@ -30,6 +32,96 @@ static unsigned long ir_core_dev_number;
 /* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
 #define IR_KEYPRESS_TIMEOUT 250
 
+/* Used to handle IR raw handler extensions */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+static struct rc_keymap *seek_rc_map(const char *name)
+{
+	struct rc_keymap *map = NULL;
+
+	spin_lock(&rc_map_lock);
+	list_for_each_entry(map, &rc_map_list, list) {
+		if (!strcmp(name, map->map.name)) {
+			spin_unlock(&rc_map_lock);
+			return map;
+		}
+	}
+	spin_unlock(&rc_map_lock);
+
+	return NULL;
+}
+
+struct ir_scancode_table *get_rc_map(const char *name)
+{
+
+	struct rc_keymap *map;
+
+	map = seek_rc_map(name);
+#ifdef MODULE
+	if (!map) {
+		int rc = request_module(name);
+		if (rc < 0) {
+			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+			return NULL;
+		}
+		msleep(20);	/* Give some time for IR to register */
+
+		map = seek_rc_map(name);
+	}
+#endif
+	if (!map) {
+		printk(KERN_ERR "IR keymap %s not found\n", name);
+		return NULL;
+	}
+
+	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+	return &map->map;
+}
+EXPORT_SYMBOL_GPL(get_rc_map);
+
+int ir_register_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_add_tail(&map->list, &rc_map_list);
+	spin_unlock(&rc_map_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_register_map);
+
+void ir_unregister_map(struct rc_keymap *map)
+{
+	spin_lock(&rc_map_lock);
+	list_del(&map->list);
+	spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+
+static struct ir_scancode empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+int ir_rcmap_init(void)
+{
+	return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+	ir_unregister_map(&empty_map);
+}
+
 /**
  * ir_create_table() - initializes a scancode table
  * @rc_tab:	the ir_scancode_table to initialize
diff --git a/drivers/media/rc/rc-map.c b/drivers/media/rc/rc-map.c
deleted file mode 100644
index 689143f2fff0..000000000000
--- a/drivers/media/rc/rc-map.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <media/ir-core.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-/* Used to handle IR raw handler extensions */
-static LIST_HEAD(rc_map_list);
-static DEFINE_SPINLOCK(rc_map_lock);
-
-static struct rc_keymap *seek_rc_map(const char *name)
-{
-	struct rc_keymap *map = NULL;
-
-	spin_lock(&rc_map_lock);
-	list_for_each_entry(map, &rc_map_list, list) {
-		if (!strcmp(name, map->map.name)) {
-			spin_unlock(&rc_map_lock);
-			return map;
-		}
-	}
-	spin_unlock(&rc_map_lock);
-
-	return NULL;
-}
-
-struct ir_scancode_table *get_rc_map(const char *name)
-{
-
-	struct rc_keymap *map;
-
-	map = seek_rc_map(name);
-#ifdef MODULE
-	if (!map) {
-		int rc = request_module(name);
-		if (rc < 0) {
-			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
-			return NULL;
-		}
-		msleep(20);	/* Give some time for IR to register */
-
-		map = seek_rc_map(name);
-	}
-#endif
-	if (!map) {
-		printk(KERN_ERR "IR keymap %s not found\n", name);
-		return NULL;
-	}
-
-	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
-
-	return &map->map;
-}
-EXPORT_SYMBOL_GPL(get_rc_map);
-
-int ir_register_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_add_tail(&map->list, &rc_map_list);
-	spin_unlock(&rc_map_lock);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_register_map);
-
-void ir_unregister_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_del(&map->list);
-	spin_unlock(&rc_map_lock);
-}
-EXPORT_SYMBOL_GPL(ir_unregister_map);
-
-
-static struct ir_scancode empty[] = {
-	{ 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
-	.map = {
-		.scan    = empty,
-		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EMPTY,
-	}
-};
-
-int ir_rcmap_init(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
-	ir_unregister_map(&empty_map);
-}
-- 
cgit v1.2.3


From 4c7b355df6e7f05304e05f6b7a286e59a5f1cc54 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=A4rdeman?= <david@hardeman.nu>
Date: Wed, 10 Nov 2010 11:04:19 -0300
Subject: [media] rc-core: Code cleanup after merging rc-sysfs and rc-map into
 rc-main
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

[mchehab@redhat.com: this patch were originally bundled with some renaming
stuff and with the file merges, as seen at:
https://patchwork.kernel.org/patch/291092/.

Instead of using the original approach, I wrote the rename patches and the
code merge as separate changes, then applied the difference on this patch.
This way, it is easier to see the real changes at the code, and will be easier
to merge upstream, especially if some conflict rises on the renaming patches]

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/rc-core-priv.h | 10 ----------
 drivers/media/rc/rc-main.c      | 30 +++++++++++++-----------------
 2 files changed, 13 insertions(+), 27 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 81c936bd793f..4be075780ad0 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -129,14 +129,6 @@ static inline bool is_timing_event(struct ir_raw_event ev)
 
 #define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
 
 /*
  * Routines from ir-raw-event.c to be used internally and by decoders
@@ -148,8 +140,6 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
 
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
 /*
  * Decoder initialization code
  *
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index afcf0a88464d..67a6bd5d9497 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -32,10 +32,16 @@ static unsigned long ir_core_dev_number;
 /* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
 #define IR_KEYPRESS_TIMEOUT 250
 
-/* Used to handle IR raw handler extensions */
+/* Used to keep track of known keymaps */
 static LIST_HEAD(rc_map_list);
 static DEFINE_SPINLOCK(rc_map_lock);
 
+/* Forward declarations */
+static int ir_register_class(struct input_dev *input_dev);
+static void ir_unregister_class(struct input_dev *input_dev);
+static int ir_register_input(struct input_dev *input_dev);
+
+
 static struct rc_keymap *seek_rc_map(const char *name)
 {
 	struct rc_keymap *map = NULL;
@@ -112,16 +118,6 @@ static struct rc_keymap empty_map = {
 	}
 };
 
-int ir_rcmap_init(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
-	ir_unregister_map(&empty_map);
-}
-
 /**
  * ir_create_table() - initializes a scancode table
  * @rc_tab:	the ir_scancode_table to initialize
@@ -265,7 +261,7 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
 }
 
 /**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
+ * ir_establish_scancode() - set a keycode in the scancode->keycode table
  * @ir_dev:	the struct ir_input_dev device descriptor
  * @rc_tab:	scancode table to be searched
  * @scancode:	the desired scancode
@@ -1097,7 +1093,7 @@ static struct device_type rc_dev_type = {
  *
  * This routine is used to register the syfs code for IR class
  */
-int ir_register_class(struct input_dev *input_dev)
+static int ir_register_class(struct input_dev *input_dev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
 	int devno = find_first_zero_bit(&ir_core_dev_number,
@@ -1122,7 +1118,7 @@ int ir_register_class(struct input_dev *input_dev)
  * @input_dev:	the struct input_dev descriptor of the device
  */
 
-int ir_register_input(struct input_dev *input_dev)
+static int ir_register_input(struct input_dev *input_dev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
 	int rc;
@@ -1155,7 +1151,7 @@ int ir_register_input(struct input_dev *input_dev)
  *
  * This routine is used to unregister the syfs code for IR class
  */
-void ir_unregister_class(struct input_dev *input_dev)
+static void ir_unregister_class(struct input_dev *input_dev)
 {
 	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
 
@@ -1181,7 +1177,7 @@ static int __init ir_core_init(void)
 
 	/* Initialize/load the decoders/keymap code that will be used */
 	ir_raw_init();
-	ir_rcmap_init();
+	ir_register_map(&empty_map);
 
 	return 0;
 }
@@ -1189,7 +1185,7 @@ static int __init ir_core_init(void)
 static void __exit ir_core_exit(void)
 {
 	class_unregister(&ir_input_class);
-	ir_rcmap_cleanup();
+	ir_unregister_map(&empty_map);
 }
 
 module_init(ir_core_init);
-- 
cgit v1.2.3


From d8b4b5822f51e2142b731b42c81e3f03eec475b2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 29 Oct 2010 16:08:23 -0300
Subject: [media] ir-core: make struct rc_dev the primary interface
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch merges the ir_input_dev and ir_dev_props structs into a single
struct called rc_dev. The drivers and various functions in rc-core used
by the drivers are also changed to use rc_dev as the primary interface
when dealing with rc-core.

This means that the input_dev is abstracted away from the drivers which
is necessary if we ever want to support multiple input devs per rc device.

The new API is similar to what the input subsystem uses, i.e:
rc_device_alloc()
rc_device_free()
rc_device_register()
rc_device_unregister()

[mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts]
Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dm1105/dm1105.c           |  42 +-
 drivers/media/dvb/dvb-usb/af9015.c          |  16 +-
 drivers/media/dvb/dvb-usb/anysee.c          |   2 +-
 drivers/media/dvb/dvb-usb/dib0700.h         |   2 +-
 drivers/media/dvb/dvb-usb/dib0700_core.c    |   8 +-
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 144 +++----
 drivers/media/dvb/dvb-usb/dvb-usb-remote.c  |  77 ++--
 drivers/media/dvb/dvb-usb/dvb-usb.h         |  12 +-
 drivers/media/dvb/dvb-usb/lmedm04.c         |  41 +-
 drivers/media/dvb/mantis/mantis_common.h    |   4 +-
 drivers/media/dvb/mantis/mantis_input.c     |  72 ++--
 drivers/media/dvb/siano/smscoreapi.c        |   2 +-
 drivers/media/dvb/siano/smsir.c             |  52 +--
 drivers/media/dvb/siano/smsir.h             |   3 +-
 drivers/media/dvb/ttpci/budget-ci.c         |  49 +--
 drivers/media/rc/ene_ir.c                   | 129 +++---
 drivers/media/rc/ene_ir.h                   |   3 +-
 drivers/media/rc/imon.c                     |  58 ++-
 drivers/media/rc/ir-jvc-decoder.c           |  13 +-
 drivers/media/rc/ir-lirc-codec.c            | 121 +++---
 drivers/media/rc/ir-nec-decoder.c           |  15 +-
 drivers/media/rc/ir-rc5-decoder.c           |  13 +-
 drivers/media/rc/ir-rc5-sz-decoder.c        |  13 +-
 drivers/media/rc/ir-rc6-decoder.c           |  17 +-
 drivers/media/rc/ir-sony-decoder.c          |  11 +-
 drivers/media/rc/mceusb.c                   | 112 +++--
 drivers/media/rc/nuvoton-cir.c              |  85 ++--
 drivers/media/rc/nuvoton-cir.h              |   3 +-
 drivers/media/rc/rc-core-priv.h             |  16 +-
 drivers/media/rc/rc-main.c                  | 612 +++++++++++++---------------
 drivers/media/rc/rc-raw.c                   | 191 ++++-----
 drivers/media/rc/streamzap.c                |  73 ++--
 drivers/media/video/bt8xx/bttv-input.c      |  41 +-
 drivers/media/video/cx231xx/cx231xx.h       |   8 +
 drivers/media/video/cx23885/cx23885-input.c |  64 ++-
 drivers/media/video/cx23885/cx23885.h       |   3 +-
 drivers/media/video/cx88/cx88-input.c       |  96 +++--
 drivers/media/video/em28xx/em28xx-input.c   |  72 ++--
 drivers/media/video/ir-kbd-i2c.c            |  25 +-
 drivers/media/video/saa7134/saa7134-input.c |  72 ++--
 40 files changed, 1104 insertions(+), 1288 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 5d404f1bf036..d1a43858f29c 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -26,7 +26,6 @@
 #include <linux/proc_fs.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
-#include <linux/input.h>
 #include <linux/slab.h>
 #include <media/ir-core.h>
 
@@ -266,7 +265,7 @@ static void dm1105_card_list(struct pci_dev *pci)
 
 /* infrared remote control */
 struct infrared {
-	struct input_dev	*input_dev;
+	struct rc_dev		*dev;
 	char			input_phys[32];
 	struct work_struct	work;
 	u32			ir_command;
@@ -532,7 +531,7 @@ static void dm1105_emit_key(struct work_struct *work)
 
 	data = (ircom >> 8) & 0x7f;
 
-	ir_keydown(ir->input_dev, data, 0);
+	ir_keydown(ir->dev, data, 0);
 }
 
 /* work handler */
@@ -593,46 +592,47 @@ static irqreturn_t dm1105_irq(int irq, void *dev_id)
 
 int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
 {
-	struct input_dev *input_dev;
-	char *ir_codes = RC_MAP_DM1105_NEC;
+	struct rc_dev *dev;
 	int err = -ENOMEM;
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
+	dev = rc_allocate_device();
+	if (!dev)
 		return -ENOMEM;
 
-	dm1105->ir.input_dev = input_dev;
 	snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
 		"pci-%s/ir0", pci_name(dm1105->pdev));
 
-	input_dev->name = "DVB on-card IR receiver";
-	input_dev->phys = dm1105->ir.input_phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->driver_name = MODULE_NAME;
+	dev->map_name = RC_MAP_DM1105_NEC;
+	dev->driver_type = RC_DRIVER_SCANCODE;
+	dev->input_name = "DVB on-card IR receiver";
+	dev->input_phys = dm1105->ir.input_phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
 	if (dm1105->pdev->subsystem_vendor) {
-		input_dev->id.vendor = dm1105->pdev->subsystem_vendor;
-		input_dev->id.product = dm1105->pdev->subsystem_device;
+		dev->input_id.vendor = dm1105->pdev->subsystem_vendor;
+		dev->input_id.product = dm1105->pdev->subsystem_device;
 	} else {
-		input_dev->id.vendor = dm1105->pdev->vendor;
-		input_dev->id.product = dm1105->pdev->device;
+		dev->input_id.vendor = dm1105->pdev->vendor;
+		dev->input_id.product = dm1105->pdev->device;
 	}
-
-	input_dev->dev.parent = &dm1105->pdev->dev;
+	dev->dev.parent = &dm1105->pdev->dev;
 
 	INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
 
-	err = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err < 0) {
-		input_free_device(input_dev);
+		rc_free_device(dev);
 		return err;
 	}
 
+	dm1105->ir.dev = dev;
 	return 0;
 }
 
 void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
 {
-	ir_input_unregister(dm1105->ir.input_dev);
+	rc_unregister_device(dm1105->ir.dev);
 }
 
 static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 31c0a0ed39f5..8b9ab3002e11 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1041,13 +1041,13 @@ static int af9015_rc_query(struct dvb_usb_device *d)
 				priv->rc_keycode = buf[12] << 16 |
 					buf[13] << 8 | buf[14];
 			}
-			ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+			ir_keydown(d->rc_dev, priv->rc_keycode, 0);
 		} else {
 			priv->rc_keycode = 0; /* clear just for sure */
 		}
 	} else if (priv->rc_repeat != buf[6] || buf[0]) {
 		deb_rc("%s: key repeated\n", __func__);
-		ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+		ir_keydown(d->rc_dev, priv->rc_keycode, 0);
 	} else {
 		deb_rc("%s: no key press\n", __func__);
 	}
@@ -1348,9 +1348,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = IR_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1478,9 +1476,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = IR_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1592,9 +1588,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = IR_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 1759d26bca42..c6e4ba53ad61 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -394,7 +394,7 @@ static int anysee_rc_query(struct dvb_usb_device *d)
 
 	if (ircode[0]) {
 		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
-		ir_keydown(d->rc_input_dev, 0x08 << 8 | ircode[1], 0);
+		ir_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
 	}
 
 	return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index c2c9d236ec7e..1e7d780332b5 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -60,7 +60,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(void *priv, u64 ir_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 ir_type);
 
 extern int dib0700_device_count;
 extern int dvb_usb_dib0700_ir_proto;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 48397f103d32..3b58f4575689 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,9 +471,9 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
-int dib0700_change_protocol(void *priv, u64 ir_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 ir_type)
 {
-	struct dvb_usb_device *d = priv;
+	struct dvb_usb_device *d = rc->priv;
 	struct dib0700_state *st = d->priv;
 	u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
 	int new_proto, ret;
@@ -535,7 +535,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 	if (d == NULL)
 		return;
 
-	if (d->rc_input_dev == NULL) {
+	if (d->rc_dev == NULL) {
 		/* This will occur if disable_rc_polling=1 */
 		usb_free_urb(purb);
 		return;
@@ -600,7 +600,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		goto resubmit;
 	}
 
-	ir_keydown(d->rc_input_dev, keycode, toggle);
+	ir_keydown(d->rc_dev, keycode, toggle);
 
 resubmit:
 	/* Clean the buffer before we requeue */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e06acd1fecb6..be167f2bea33 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -520,13 +520,13 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 			d->last_event = keycode;
 		}
 
-		ir_keydown(d->rc_input_dev, keycode, 0);
+		ir_keydown(d->rc_dev, keycode, 0);
 		break;
 	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
 		keycode = key[3-2] << 8 | key[3-3];
 		toggle = key[3-1];
-		ir_keydown(d->rc_input_dev, keycode, toggle);
+		ir_keydown(d->rc_dev, keycode, toggle);
 
 		break;
 	}
@@ -1924,12 +1924,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -1960,12 +1958,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2021,12 +2017,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2065,12 +2059,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2143,12 +2135,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2189,12 +2179,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2259,12 +2247,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2308,12 +2294,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2379,12 +2363,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2417,12 +2399,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2487,12 +2467,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2533,12 +2511,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 2,
@@ -2584,12 +2560,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2623,12 +2597,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = IR_TYPE_RC5 |
+					    IR_TYPE_RC6 |
+					    IR_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	},
 };
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index b579fed3ab3f..bbba149a2ceb 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -106,10 +106,10 @@ static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
 			d->last_event = event;
 		case REMOTE_KEY_REPEAT:
 			deb_rc("key repeated\n");
-			input_event(d->rc_input_dev, EV_KEY, event, 1);
-			input_sync(d->rc_input_dev);
-			input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
-			input_sync(d->rc_input_dev);
+			input_event(d->input_dev, EV_KEY, event, 1);
+			input_sync(d->input_dev);
+			input_event(d->input_dev, EV_KEY, d->last_event, 0);
+			input_sync(d->input_dev);
 			break;
 		default:
 			break;
@@ -154,10 +154,22 @@ schedule:
 	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
 }
 
-static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d,
-				      struct input_dev *input_dev)
+static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
 {
 	int i, err, rc_interval;
+	struct input_dev *input_dev;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_dev->name = "IR-receiver inside an USB DVB receiver";
+	input_dev->phys = d->rc_phys;
+	usb_to_input_id(d->udev, &input_dev->id);
+	input_dev->dev.parent = &d->udev->dev;
+	d->input_dev = input_dev;
+	d->rc_dev = NULL;
 
 	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
 	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
@@ -221,18 +233,34 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 			      msecs_to_jiffies(d->props.rc.core.rc_interval));
 }
 
-static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
-				       struct input_dev *input_dev)
+static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
 {
 	int err, rc_interval;
+	struct rc_dev *dev;
+
+	dev = rc_allocate_device();
+	if (!dev)
+		return -ENOMEM;
 
-	d->props.rc.core.rc_props.priv = d;
-	err = ir_input_register(input_dev,
-				 d->props.rc.core.rc_codes,
-				 &d->props.rc.core.rc_props,
-				 d->props.rc.core.module_name);
-	if (err < 0)
+	dev->driver_name = d->props.rc.core.module_name;
+	dev->map_name = d->props.rc.core.rc_codes;
+	dev->change_protocol = d->props.rc.core.change_protocol;
+	dev->allowed_protos = d->props.rc.core.allowed_protos;
+	dev->driver_type = RC_DRIVER_SCANCODE;
+	usb_to_input_id(d->udev, &dev->input_id);
+	dev->input_name = "IR-receiver inside an USB DVB receiver";
+	dev->input_phys = d->rc_phys;
+	dev->dev.parent = &d->udev->dev;
+	dev->priv = d;
+
+	err = rc_register_device(dev);
+	if (err < 0) {
+		rc_free_device(dev);
 		return err;
+	}
+
+	d->input_dev = NULL;
+	d->rc_dev = dev;
 
 	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
 		return 0;
@@ -251,7 +279,6 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
 
 int dvb_usb_remote_init(struct dvb_usb_device *d)
 {
-	struct input_dev *input_dev;
 	int err;
 
 	if (dvb_usb_disable_rc_polling)
@@ -267,26 +294,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
 	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->name = "IR-receiver inside an USB DVB receiver";
-	input_dev->phys = d->rc_phys;
-	usb_to_input_id(d->udev, &input_dev->id);
-	input_dev->dev.parent = &d->udev->dev;
-
 	/* Start the remote-control polling. */
 	if (d->props.rc.legacy.rc_interval < 40)
 		d->props.rc.legacy.rc_interval = 100; /* default */
 
-	d->rc_input_dev = input_dev;
-
 	if (d->props.rc.mode == DVB_RC_LEGACY)
-		err = legacy_dvb_usb_remote_init(d, input_dev);
+		err = legacy_dvb_usb_remote_init(d);
 	else
-		err = rc_core_dvb_usb_remote_init(d, input_dev);
+		err = rc_core_dvb_usb_remote_init(d);
 	if (err)
 		return err;
 
@@ -301,9 +316,9 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d)
 		cancel_rearming_delayed_work(&d->rc_query_work);
 		flush_scheduled_work();
 		if (d->props.rc.mode == DVB_RC_LEGACY)
-			input_unregister_device(d->rc_input_dev);
+			input_unregister_device(d->input_dev);
 		else
-			ir_input_unregister(d->rc_input_dev);
+			rc_unregister_device(d->rc_dev);
 	}
 	d->state &= ~DVB_USB_STATE_REMOTE;
 	return 0;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 34f7b3ba8cc7..83aa9826560f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -180,18 +180,20 @@ struct dvb_rc_legacy {
  * struct dvb_rc properties of remote controller, using rc-core
  * @rc_codes: name of rc codes table
  * @protocol: type of protocol(s) currently used by the driver
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
  * @rc_query: called to query an event event.
  * @rc_interval: time in ms between two queries.
- * @rc_props: remote controller properties
  * @bulk_mode: device supports bulk mode for RC (disable polling mode)
  */
 struct dvb_rc {
 	char *rc_codes;
 	u64 protocol;
+	u64 allowed_protos;
+	int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
 	char *module_name;
 	int (*rc_query) (struct dvb_usb_device *d);
 	int rc_interval;
-	struct ir_dev_props rc_props;
 	bool bulk_mode;				/* uses bulk mode */
 };
 
@@ -385,7 +387,8 @@ struct dvb_usb_adapter {
  *
  * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
  *
- * @rc_input_dev: input device for the remote control.
+ * @rc_dev: rc device for the remote control (rc-core mode)
+ * @input_dev: input device for the remote control (legacy mode)
  * @rc_query_work: struct work_struct frequent rc queries
  * @last_event: last triggered event
  * @last_state: last state (no, pressed, repeat)
@@ -418,7 +421,8 @@ struct dvb_usb_device {
 	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
 
 	/* remote control */
-	struct input_dev *rc_input_dev;
+	struct rc_dev *rc_dev;
+	struct input_dev *input_dev;
 	char rc_phys[64];
 	struct delayed_work rc_query_work;
 	u32 last_event;
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index de7f1fbec92e..d8f1b150e1cb 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -198,7 +198,7 @@ static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
 	deb_info(1, "INT Key Keypress =%04x", keypress);
 
 	if (keypress > 0)
-		ir_keydown(d->rc_input_dev, keypress, 0);
+		ir_keydown(d->rc_dev, keypress, 0);
 
 	return 0;
 }
@@ -555,42 +555,39 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 static int lme2510_int_service(struct dvb_usb_adapter *adap)
 {
 	struct dvb_usb_device *d = adap->dev;
-	struct input_dev *input_dev;
-	char *ir_codes = RC_MAP_LME2510;
-	int ret = 0;
+	struct rc_dev *rc;
+	int ret;
 
 	info("STA Configuring Remote");
 
-	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
-
-	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
+	rc = rc_allocate_device();
+	if (!rc)
 		return -ENOMEM;
 
-	input_dev->name = "LME2510 Remote Control";
-	input_dev->phys = d->rc_phys;
-
-	usb_to_input_id(d->udev, &input_dev->id);
+	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
-	ret |= ir_input_register(input_dev, ir_codes, NULL, "LME 2510");
+	rc->input_name = "LME2510 Remote Control";
+	rc->input_phys = d->rc_phys;
+	rc->map_name = RC_MAP_LME2510;
+	rc->driver_name = "LME 2510";
+	usb_to_input_id(d->udev, &rc->input_id);
 
+	ret = rc_register_device(rc);
 	if (ret) {
-		input_free_device(input_dev);
+		rc_free_device(rc);
 		return ret;
 	}
+	d->rc_dev = rc;
 
-	d->rc_input_dev = input_dev;
 	/* Start the Interupt */
 	ret = lme2510_int_read(adap);
-
 	if (ret < 0) {
-		ir_input_unregister(input_dev);
-		input_free_device(input_dev);
+		rc_unregister_device(rc);
+		return -ENODEV;
 	}
 
-	return (ret < 0) ? -ENODEV : 0;
+	return 0;
 }
 
 static u8 check_sum(u8 *p, u8 len)
@@ -1025,7 +1022,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
 		usb_free_coherent(d->udev, 5000, st->buffer,
 				  st->lme_urb->transfer_dma);
 		info("Interupt Service Stopped");
-		ir_input_unregister(d->rc_input_dev);
+		rc_unregister_device(d->rc_dev);
 		info("Remote Stopped");
 	}
 	return buffer;
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index d0b645a483c9..bd400d21b81f 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -171,7 +171,9 @@ struct mantis_pci {
 	struct work_struct	uart_work;
 	spinlock_t		uart_lock;
 
-	struct input_dev	*rc;
+	struct rc_dev		*rc;
+	char			input_name[80];
+	char			input_phys[80];
 };
 
 #define MANTIS_HIF_STATUS	(mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index a99489b8418b..209f2110e20c 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,6 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/input.h>
 #include <media/ir-core.h>
 #include <linux/pci.h>
 
@@ -33,6 +32,7 @@
 #include "mantis_uart.h"
 
 #define MODULE_NAME "mantis_core"
+#define RC_MAP_MANTIS "rc-mantis"
 
 static struct ir_scancode mantis_ir_table[] = {
 	{ 0x29, KEY_POWER	},
@@ -95,53 +95,65 @@ static struct ir_scancode mantis_ir_table[] = {
 	{ 0x00, KEY_BLUE	},
 };
 
-struct ir_scancode_table ir_mantis = {
-	.scan = mantis_ir_table,
-	.size = ARRAY_SIZE(mantis_ir_table),
+static struct rc_keymap ir_mantis_map = {
+	.map = {
+		.scan = mantis_ir_table,
+		.size = ARRAY_SIZE(mantis_ir_table),
+		.ir_type = IR_TYPE_UNKNOWN,
+		.name = RC_MAP_MANTIS,
+	}
 };
-EXPORT_SYMBOL_GPL(ir_mantis);
 
 int mantis_input_init(struct mantis_pci *mantis)
 {
-	struct input_dev *rc;
-	char name[80], dev[80];
+	struct rc_dev *dev;
 	int err;
 
-	rc = input_allocate_device();
-	if (!rc) {
-		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
-		return -ENOMEM;
-	}
+	err = ir_register_map(&ir_mantis_map);
+	if (err)
+		goto out;
 
-	sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+	dev = rc_allocate_device();
+	if (!dev) {
+		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
+		err = -ENOMEM;
+		goto out_map;
+	}
 
-	rc->name = name;
-	rc->phys = dev;
+	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
 
-	rc->id.bustype	= BUS_PCI;
-	rc->id.vendor	= mantis->vendor_id;
-	rc->id.product	= mantis->device_id;
-	rc->id.version	= 1;
-	rc->dev		= mantis->pdev->dev;
+	dev->input_name         = mantis->input_name;
+	dev->input_phys         = mantis->input_phys;
+	dev->input_id.bustype   = BUS_PCI;
+	dev->input_id.vendor    = mantis->vendor_id;
+	dev->input_id.product   = mantis->device_id;
+	dev->input_id.version   = 1;
+	dev->driver_name        = MODULE_NAME;
+	dev->map_name           = RC_MAP_MANTIS;
+	dev->dev.parent         = &mantis->pdev->dev;
 
-	err = __ir_input_register(rc, &ir_mantis, NULL, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		input_free_device(rc);
-		return -ENODEV;
+		goto out_dev;
 	}
 
-	mantis->rc = rc;
-
+	mantis->rc = dev;
 	return 0;
+
+out_dev:
+	rc_free_device(dev);
+out_map:
+	ir_unregister_map(&ir_mantis_map);
+out:
+	return err;
 }
 
 int mantis_exit(struct mantis_pci *mantis)
 {
-	struct input_dev *rc = mantis->rc;
-
-	ir_input_unregister(rc);
-
+	rc_unregister_device(mantis->rc);
+	ir_unregister_map(&ir_mantis_map);
 	return 0;
 }
+
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 135e45bd00c7..78765ed28063 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -438,7 +438,7 @@ static int smscore_init_ir(struct smscore_device_t *coredev)
 	int rc;
 	void *buffer;
 
-	coredev->ir.input_dev = NULL;
+	coredev->ir.dev = NULL;
 	ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
 	if (ir_io) {/* only if IR port exist we use IR sub-module */
 		sms_info("IR loading");
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index a27c44a8af5a..ebd73059b518 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -45,25 +45,24 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
 		ev.duration = abs(samples[i]) * 1000; /* Convert to ns */
 		ev.pulse = (samples[i] > 0) ? false : true;
 
-		ir_raw_event_store(coredev->ir.input_dev, &ev);
+		ir_raw_event_store(coredev->ir.dev, &ev);
 	}
-	ir_raw_event_handle(coredev->ir.input_dev);
+	ir_raw_event_handle(coredev->ir.dev);
 }
 
 int sms_ir_init(struct smscore_device_t *coredev)
 {
-	struct input_dev *input_dev;
+	int err;
 	int board_id = smscore_get_board_id(coredev);
+	struct rc_dev *dev;
 
-	sms_log("Allocating input device");
-	input_dev = input_allocate_device();
-	if (!input_dev)	{
+	sms_log("Allocating rc device");
+	dev = rc_allocate_device();
+	if (!dev) {
 		sms_err("Not enough memory");
 		return -ENOMEM;
 	}
 
-	coredev->ir.input_dev = input_dev;
-
 	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
 	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
 	sms_log("IR port %d, timeout %d ms",
@@ -75,38 +74,41 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
 	strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
 
-	input_dev->name = coredev->ir.name;
-	input_dev->phys = coredev->ir.phys;
-	input_dev->dev.parent = coredev->device;
+	dev->input_name = coredev->ir.name;
+	dev->input_phys = coredev->ir.phys;
+	dev->dev.parent = coredev->device;
 
 #if 0
 	/* TODO: properly initialize the parameters bellow */
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.version = 1;
-	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	dev->input_id.bustype = BUS_USB;
+	dev->input_id.version = 1;
+	dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
 #endif
 
-	coredev->ir.props.priv = coredev;
-	coredev->ir.props.driver_type = RC_DRIVER_IR_RAW;
-	coredev->ir.props.allowed_protos = IR_TYPE_ALL;
+	dev->priv = coredev;
+	dev->driver_type = RC_DRIVER_IR_RAW;
+	dev->allowed_protos = IR_TYPE_ALL;
+	dev->map_name = sms_get_board(board_id)->rc_codes;
+	dev->driver_name = MODULE_NAME;
 
-	sms_log("Input device (IR) %s is set for key events", input_dev->name);
+	sms_log("Input device (IR) %s is set for key events", dev->input_name);
 
-	if (ir_input_register(input_dev, sms_get_board(board_id)->rc_codes,
-			      &coredev->ir.props, MODULE_NAME)) {
+	err = rc_register_device(dev);
+	if (err < 0) {
 		sms_err("Failed to register device");
-		input_free_device(input_dev);
-		return -EACCES;
+		rc_free_device(dev);
+		return err;
 	}
 
+	coredev->ir.dev = dev;
 	return 0;
 }
 
 void sms_ir_exit(struct smscore_device_t *coredev)
 {
-	if (coredev->ir.input_dev)
-		ir_input_unregister(coredev->ir.input_dev);
+	if (coredev->ir.dev)
+		rc_unregister_device(coredev->ir.dev);
 
 	sms_log("");
 }
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index 926e247523bd..c2f68a460ee1 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -35,13 +35,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 struct smscore_device_t;
 
 struct ir_t {
-	struct input_dev *input_dev;
+	struct rc_dev *dev;
 	char name[40];
 	char phys[32];
 
 	char *rc_codes;
 	u64 protocol;
-	struct ir_dev_props props;
 
 	u32 timeout;
 	u32 controller;
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index a9c2c326df4b..9aca0f37993b 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/spinlock.h>
 #include <media/ir-core.h>
 
@@ -96,7 +95,7 @@ MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct budget_ci_ir {
-	struct input_dev *dev;
+	struct rc_dev *dev;
 	struct tasklet_struct msp430_irq_tasklet;
 	char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
 	char phys[32];
@@ -118,7 +117,7 @@ struct budget_ci {
 static void msp430_ir_interrupt(unsigned long data)
 {
 	struct budget_ci *budget_ci = (struct budget_ci *) data;
-	struct input_dev *dev = budget_ci->ir.dev;
+	struct rc_dev *dev = budget_ci->ir.dev;
 	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
 
 	/*
@@ -166,13 +165,11 @@ static void msp430_ir_interrupt(unsigned long data)
 static int msp430_ir_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *input_dev = budget_ci->ir.dev;
+	struct rc_dev *dev;
 	int error;
-	char *ir_codes = NULL;
 
-
-	budget_ci->ir.dev = input_dev = input_allocate_device();
-	if (!input_dev) {
+	dev = rc_allocate_device();
+	if (!dev) {
 		printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
 		return -ENOMEM;
 	}
@@ -182,19 +179,19 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
 		 "pci-%s/ir0", pci_name(saa->pci));
 
-	input_dev->name = budget_ci->ir.name;
-
-	input_dev->phys = budget_ci->ir.phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->driver_name = MODULE_NAME;
+	dev->input_name = budget_ci->ir.name;
+	dev->input_phys = budget_ci->ir.phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
 	if (saa->pci->subsystem_vendor) {
-		input_dev->id.vendor = saa->pci->subsystem_vendor;
-		input_dev->id.product = saa->pci->subsystem_device;
+		dev->input_id.vendor = saa->pci->subsystem_vendor;
+		dev->input_id.product = saa->pci->subsystem_device;
 	} else {
-		input_dev->id.vendor = saa->pci->vendor;
-		input_dev->id.product = saa->pci->device;
+		dev->input_id.vendor = saa->pci->vendor;
+		dev->input_id.product = saa->pci->device;
 	}
-	input_dev->dev.parent = &saa->pci->dev;
+	dev->dev.parent = &saa->pci->dev;
 
 	if (rc5_device < 0)
 		budget_ci->ir.rc5_device = IR_DEVICE_ANY;
@@ -208,7 +205,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	case 0x1011:
 	case 0x1012:
 		/* The hauppauge keymap is a superset of these remotes */
-		ir_codes = RC_MAP_HAUPPAUGE_NEW;
+		dev->map_name = RC_MAP_HAUPPAUGE_NEW;
 
 		if (rc5_device < 0)
 			budget_ci->ir.rc5_device = 0x1f;
@@ -218,23 +215,22 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	case 0x1019:
 	case 0x101a:
 		/* for the Technotrend 1500 bundled remote */
-		ir_codes = RC_MAP_TT_1500;
+		dev->map_name = RC_MAP_TT_1500;
 		break;
 	default:
 		/* unknown remote */
-		ir_codes = RC_MAP_BUDGET_CI_OLD;
+		dev->map_name = RC_MAP_BUDGET_CI_OLD;
 		break;
 	}
 
-	error = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+	error = rc_register_device(dev);
 	if (error) {
 		printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+		rc_free_device(dev);
 		return error;
 	}
 
-	/* note: these must be after input_register_device */
-	input_dev->rep[REP_DELAY] = 400;
-	input_dev->rep[REP_PERIOD] = 250;
+	budget_ci->ir.dev = dev;
 
 	tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
 		     (unsigned long) budget_ci);
@@ -248,13 +244,12 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 static void msp430_ir_deinit(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *dev = budget_ci->ir.dev;
 
 	SAA7146_IER_DISABLE(saa, MASK_06);
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 	tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
 
-	ir_input_unregister(dev);
+	rc_unregister_device(budget_ci->ir.dev);
 }
 
 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 7637babcd262..0a4151f03c7e 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -37,9 +37,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/input.h>
 #include <media/ir-core.h>
-#include <media/ir-common.h>
 #include "ene_ir.h"
 
 static int sample_period;
@@ -357,7 +355,7 @@ void ene_rx_sense_carrier(struct ene_device *dev)
 		ev.carrier_report = true;
 		ev.carrier = carrier;
 		ev.duty_cycle = duty_cycle;
-		ir_raw_event_store(dev->idev, &ev);
+		ir_raw_event_store(dev->rdev, &ev);
 	}
 }
 
@@ -448,32 +446,32 @@ static void ene_rx_setup(struct ene_device *dev)
 
 select_timeout:
 	if (dev->rx_fan_input_inuse) {
-		dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+		dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
 
 		/* Fan input doesn't support timeouts, it just ends the
 			input with a maximum sample */
-		dev->props->min_timeout = dev->props->max_timeout =
+		dev->rdev->min_timeout = dev->rdev->max_timeout =
 			MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
 				ENE_FW_SAMPLE_PERIOD_FAN);
 	} else {
-		dev->props->rx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->rx_resolution = MS_TO_NS(sample_period);
 
 		/* Theoreticly timeout is unlimited, but we cap it
 		 * because it was seen that on one device, it
 		 * would stop sending spaces after around 250 msec.
 		 * Besides, this is close to 2^32 anyway and timeout is u32.
 		 */
-		dev->props->min_timeout = MS_TO_NS(127 * sample_period);
-		dev->props->max_timeout = MS_TO_NS(200000);
+		dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
+		dev->rdev->max_timeout = MS_TO_NS(200000);
 	}
 
 	if (dev->hw_learning_and_tx_capable)
-		dev->props->tx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->tx_resolution = MS_TO_NS(sample_period);
 
-	if (dev->props->timeout > dev->props->max_timeout)
-		dev->props->timeout = dev->props->max_timeout;
-	if (dev->props->timeout < dev->props->min_timeout)
-		dev->props->timeout = dev->props->min_timeout;
+	if (dev->rdev->timeout > dev->rdev->max_timeout)
+		dev->rdev->timeout = dev->rdev->max_timeout;
+	if (dev->rdev->timeout < dev->rdev->min_timeout)
+		dev->rdev->timeout = dev->rdev->min_timeout;
 }
 
 /* Enable the device for receive */
@@ -504,7 +502,7 @@ static void ene_rx_enable(struct ene_device *dev)
 	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
 
 	/* enter idle mode */
-	ir_raw_event_set_idle(dev->idev, true);
+	ir_raw_event_set_idle(dev->rdev, true);
 	dev->rx_enabled = true;
 }
 
@@ -518,7 +516,7 @@ static void ene_rx_disable(struct ene_device *dev)
 	/* disable hardware IRQ and firmware flag */
 	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
 
-	ir_raw_event_set_idle(dev->idev, true);
+	ir_raw_event_set_idle(dev->rdev, true);
 	dev->rx_enabled = false;
 }
 
@@ -805,10 +803,10 @@ static irqreturn_t ene_isr(int irq, void *data)
 
 		ev.duration = MS_TO_NS(hw_sample);
 		ev.pulse = pulse;
-		ir_raw_event_store_with_filter(dev->idev, &ev);
+		ir_raw_event_store_with_filter(dev->rdev, &ev);
 	}
 
-	ir_raw_event_handle(dev->idev);
+	ir_raw_event_handle(dev->rdev);
 unlock:
 	spin_unlock_irqrestore(&dev->hw_lock, flags);
 	return retval;
@@ -823,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
 	dev->learning_mode_enabled = learning_mode_force;
 
 	/* Set reasonable default timeout */
-	dev->props->timeout = MS_TO_NS(150000);
+	dev->rdev->timeout = MS_TO_NS(150000);
 }
 
 /* Upload all hardware settings at once. Used at load and resume time */
@@ -838,9 +836,9 @@ static void ene_setup_hw_settings(struct ene_device *dev)
 }
 
 /* outside interface: called on first open*/
-static int ene_open(void *data)
+static int ene_open(struct rc_dev *rdev)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->hw_lock, flags);
@@ -850,9 +848,9 @@ static int ene_open(void *data)
 }
 
 /* outside interface: called on device close*/
-static void ene_close(void *data)
+static void ene_close(struct rc_dev *rdev)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 	spin_lock_irqsave(&dev->hw_lock, flags);
 
@@ -861,9 +859,9 @@ static void ene_close(void *data)
 }
 
 /* outside interface: set transmitter mask */
-static int ene_set_tx_mask(void *data, u32 tx_mask)
+static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	dbg("TX: attempt to set transmitter mask %02x", tx_mask);
 
 	/* invalid txmask */
@@ -879,9 +877,9 @@ static int ene_set_tx_mask(void *data, u32 tx_mask)
 }
 
 /* outside interface : set tx carrier */
-static int ene_set_tx_carrier(void *data, u32 carrier)
+static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	u32 period = 2000000 / carrier;
 
 	dbg("TX: attempt to set tx carrier to %d kHz", carrier);
@@ -900,9 +898,9 @@ static int ene_set_tx_carrier(void *data, u32 carrier)
 }
 
 /*outside interface : set tx duty cycle */
-static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
+static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	dbg("TX: setting duty cycle to %d%%", duty_cycle);
 	dev->tx_duty_cycle = duty_cycle;
 	ene_tx_set_carrier(dev);
@@ -910,9 +908,9 @@ static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
 }
 
 /* outside interface: enable learning mode */
-static int ene_set_learning_mode(void *data, int enable)
+static int ene_set_learning_mode(struct rc_dev *rdev, int enable)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 	if (enable == dev->learning_mode_enabled)
 		return 0;
@@ -926,9 +924,9 @@ static int ene_set_learning_mode(void *data, int enable)
 	return 0;
 }
 
-static int ene_set_carrier_report(void *data, int enable)
+static int ene_set_carrier_report(struct rc_dev *rdev, int enable)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	if (enable == dev->carrier_detect_enabled)
@@ -944,18 +942,20 @@ static int ene_set_carrier_report(void *data, int enable)
 }
 
 /* outside interface: enable or disable idle mode */
-static void ene_set_idle(void *data, bool idle)
+static void ene_set_idle(struct rc_dev *rdev, bool idle)
 {
+	struct ene_device *dev = rdev->priv;
+
 	if (idle) {
-		ene_rx_reset((struct ene_device *)data);
+		ene_rx_reset(dev);
 		dbg("RX: end of data");
 	}
 }
 
 /* outside interface: transmit */
-static int ene_transmit(void *data, int *buf, u32 n)
+static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	dev->tx_buffer = buf;
@@ -992,16 +992,13 @@ static int ene_transmit(void *data, int *buf, u32 n)
 static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 {
 	int error = -ENOMEM;
-	struct ir_dev_props *ir_props;
-	struct input_dev *input_dev;
+	struct rc_dev *rdev;
 	struct ene_device *dev;
 
 	/* allocate memory */
-	input_dev = input_allocate_device();
-	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
 	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!input_dev || !ir_props || !dev)
+	rdev = rc_allocate_device();
+	if (!dev || !rdev)
 		goto error1;
 
 	/* validate resources */
@@ -1054,24 +1051,25 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	if (!dev->hw_learning_and_tx_capable)
 		learning_mode_force = false;
 
-	ir_props->driver_type = RC_DRIVER_IR_RAW;
-	ir_props->allowed_protos = IR_TYPE_ALL;
-	ir_props->priv = dev;
-	ir_props->open = ene_open;
-	ir_props->close = ene_close;
-	ir_props->s_idle = ene_set_idle;
-
-	dev->props = ir_props;
-	dev->idev = input_dev;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->priv = dev;
+	rdev->open = ene_open;
+	rdev->close = ene_close;
+	rdev->s_idle = ene_set_idle;
+	rdev->driver_name = ENE_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
+	rdev->input_name = "ENE eHome Infrared Remote Receiver";
 
 	if (dev->hw_learning_and_tx_capable) {
-		ir_props->s_learning_mode = ene_set_learning_mode;
+		rdev->s_learning_mode = ene_set_learning_mode;
 		init_completion(&dev->tx_complete);
-		ir_props->tx_ir = ene_transmit;
-		ir_props->s_tx_mask = ene_set_tx_mask;
-		ir_props->s_tx_carrier = ene_set_tx_carrier;
-		ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
-		ir_props->s_carrier_report = ene_set_carrier_report;
+		rdev->tx_ir = ene_transmit;
+		rdev->s_tx_mask = ene_set_tx_mask;
+		rdev->s_tx_carrier = ene_set_tx_carrier;
+		rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;
+		rdev->s_carrier_report = ene_set_carrier_report;
+		rdev->input_name = "ENE eHome Infrared Remote Transceiver";
 	}
 
 	ene_rx_setup_hw_buffer(dev);
@@ -1081,16 +1079,11 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	device_set_wakeup_capable(&pnp_dev->dev, true);
 	device_set_wakeup_enable(&pnp_dev->dev, true);
 
-	if (dev->hw_learning_and_tx_capable)
-		input_dev->name = "ENE eHome Infrared Remote Transceiver";
-	else
-		input_dev->name = "ENE eHome Infrared Remote Receiver";
-
-	error = -ENODEV;
-	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
-							ENE_DRIVER_NAME))
+	error = rc_register_device(rdev);
+	if (error < 0)
 		goto error;
 
+	dev->rdev = rdev;
 	ene_notice("driver has been succesfully loaded");
 	return 0;
 error:
@@ -1099,8 +1092,7 @@ error:
 	if (dev && dev->hw_io >= 0)
 		release_region(dev->hw_io, ENE_IO_SIZE);
 error1:
-	input_free_device(input_dev);
-	kfree(ir_props);
+	rc_free_device(rdev);
 	kfree(dev);
 	return error;
 }
@@ -1118,8 +1110,7 @@ static void ene_remove(struct pnp_dev *pnp_dev)
 
 	free_irq(dev->irq, dev);
 	release_region(dev->hw_io, ENE_IO_SIZE);
-	ir_input_unregister(dev->idev);
-	kfree(dev->props);
+	rc_unregister_device(dev->rdev);
 	kfree(dev);
 }
 
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
index f5870667a433..c179baf34cb4 100644
--- a/drivers/media/rc/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -205,8 +205,7 @@
 
 struct ene_device {
 	struct pnp_dev *pnp_dev;
-	struct input_dev *idev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 
 	/* hw IO settings */
 	long hw_io;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 79f4f58c2ea4..8d4b35d1ae56 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -88,7 +88,6 @@ static ssize_t lcd_write(struct file *file, const char *buf,
 
 struct imon_context {
 	struct device *dev;
-	struct ir_dev_props *props;
 	/* Newer devices have two interfaces */
 	struct usb_device *usbdev_intf0;
 	struct usb_device *usbdev_intf1;
@@ -123,7 +122,7 @@ struct imon_context {
 	u16 vendor;			/* usb vendor ID */
 	u16 product;			/* usb product ID */
 
-	struct input_dev *rdev;		/* input device for remote */
+	struct rc_dev *rdev;		/* rc-core device for remote */
 	struct input_dev *idev;		/* input device for panel & IR mouse */
 	struct input_dev *touch;	/* input device for touchscreen */
 
@@ -984,16 +983,16 @@ static void imon_touch_display_timeout(unsigned long data)
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
  */
-int imon_ir_change_protocol(void *priv, u64 ir_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 {
 	int retval;
-	struct imon_context *ictx = priv;
+	struct imon_context *ictx = rc->priv;
 	struct device *dev = ictx->dev;
 	bool pad_mouse;
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
-	if (ir_type && !(ir_type & ictx->props->allowed_protos))
+	if (ir_type && !(ir_type & rc->allowed_protos))
 		dev_warn(dev, "Looks like you're trying to use an IR protocol "
 			 "this device does not support\n");
 
@@ -1757,7 +1756,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 	printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
 
 	ictx->display_type = detected_display_type;
-	ictx->props->allowed_protos = allowed_protos;
+	ictx->rdev->allowed_protos = allowed_protos;
 	ictx->ir_type = allowed_protos;
 }
 
@@ -1811,18 +1810,15 @@ static void imon_set_display_type(struct imon_context *ictx)
 	ictx->display_type = configured_display_type;
 }
 
-static struct input_dev *imon_init_rdev(struct imon_context *ictx)
+static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 {
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	int ret;
-	char *ir_codes = NULL;
 	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
 					    0x00, 0x00, 0x00, 0x88 };
 
-	rdev = input_allocate_device();
-	props = kzalloc(sizeof(*props), GFP_KERNEL);
-	if (!rdev || !props) {
+	rdev = rc_allocate_device();
+	if (!rdev) {
 		dev_err(ictx->dev, "remote control dev allocation failed\n");
 		goto out;
 	}
@@ -1833,18 +1829,20 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 		      sizeof(ictx->phys_rdev));
 	strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
 
-	rdev->name = ictx->name_rdev;
-	rdev->phys = ictx->phys_rdev;
-	usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
+	rdev->input_name = ictx->name_rdev;
+	rdev->input_phys = ictx->phys_rdev;
+	usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id);
 	rdev->dev.parent = ictx->dev;
-	rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_drvdata(rdev, ictx);
 
-	props->priv = ictx;
-	props->driver_type = RC_DRIVER_SCANCODE;
-	props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
-	props->change_protocol = imon_ir_change_protocol;
-	ictx->props = props;
+	rdev->priv = ictx;
+	rdev->driver_type = RC_DRIVER_SCANCODE;
+	rdev->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
+	rdev->change_protocol = imon_ir_change_protocol;
+	rdev->driver_name = MOD_NAME;
+	if (ictx->ir_type == IR_TYPE_RC6)
+		rdev->map_name = RC_MAP_IMON_MCE;
+	else
+		rdev->map_name = RC_MAP_IMON_PAD;
 
 	/* Enable front-panel buttons and/or knobs */
 	memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
@@ -1858,12 +1856,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 
 	imon_set_display_type(ictx);
 
-	if (ictx->ir_type == IR_TYPE_RC6)
-		ir_codes = RC_MAP_IMON_MCE;
-	else
-		ir_codes = RC_MAP_IMON_PAD;
-
-	ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
+	ret = rc_register_device(rdev);
 	if (ret < 0) {
 		dev_err(ictx->dev, "remote input dev register failed\n");
 		goto out;
@@ -1872,8 +1865,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 	return rdev;
 
 out:
-	kfree(props);
-	input_free_device(rdev);
+	rc_free_device(rdev);
 	return NULL;
 }
 
@@ -2144,7 +2136,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 	return ictx;
 
 urb_submit_failed:
-	ir_input_unregister(ictx->rdev);
+	rc_unregister_device(ictx->rdev);
 rdev_setup_failed:
 	input_unregister_device(ictx->idev);
 idev_setup_failed:
@@ -2371,7 +2363,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
 		ictx->dev_present_intf0 = false;
 		usb_kill_urb(ictx->rx_urb_intf0);
 		input_unregister_device(ictx->idev);
-		ir_input_unregister(ictx->rdev);
+		rc_unregister_device(ictx->rdev);
 		if (ictx->display_supported) {
 			if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
 				usb_deregister_dev(interface, &imon_lcd_class);
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index d83a5f64bfe4..cfe0e70440a5 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -37,17 +37,16 @@ enum jvc_state {
 
 /**
  * ir_jvc_decode() - Decode one JVC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @duration:   the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct jvc_dec *data = &ir_dev->raw->jvc;
+	struct jvc_dec *data = &dev->raw->jvc;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
+	if (!(dev->raw->enabled_protocols & IR_TYPE_JVC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -140,12 +139,12 @@ again:
 			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
 				   (bitrev8((data->bits >> 0) & 0xff) << 0);
 			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
-			ir_keydown(input_dev, scancode, data->toggle);
+			ir_keydown(dev, scancode, data->toggle);
 			data->first = false;
 			data->old_bits = data->bits;
 		} else if (data->bits == data->old_bits) {
 			IR_dprintk(1, "JVC repeat\n");
-			ir_repeat(input_dev);
+			ir_repeat(dev);
 		} else {
 			IR_dprintk(1, "JVC invalid repeat msg\n");
 			break;
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 9345995dbf14..ceabea6053de 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -24,21 +24,20 @@
 /**
  * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
  *		      lircd userspace daemon for decoding.
- * @input_dev:	the struct input_dev descriptor of the device
+ * @input_dev:	the struct rc_dev descriptor of the device
  * @duration:	the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the lirc interfaces aren't wired up.
  */
-static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+	struct lirc_codec *lirc = &dev->raw->lirc;
 	int sample;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+	if (!(dev->raw->enabled_protocols & IR_TYPE_LIRC))
 		return 0;
 
-	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+	if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
 		return -EINVAL;
 
 	/* Packet start */
@@ -79,7 +78,7 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 							(u64)LIRC_VALUE_MASK);
 
 			gap_sample = LIRC_SPACE(lirc->gap_duration);
-			lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+			lirc_buffer_write(dev->raw->lirc.drv->rbuf,
 						(unsigned char *) &gap_sample);
 			lirc->gap = false;
 		}
@@ -88,9 +87,9 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 					LIRC_SPACE(ev.duration / 1000);
 	}
 
-	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+	lirc_buffer_write(dev->raw->lirc.drv->rbuf,
 			  (unsigned char *) &sample);
-	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+	wake_up(&dev->raw->lirc.drv->rbuf->wait_poll);
 
 	return 0;
 }
@@ -99,7 +98,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 				   size_t n, loff_t *ppos)
 {
 	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
+	struct rc_dev *dev;
 	int *txbuf; /* buffer with values to transmit */
 	int ret = 0, count;
 
@@ -118,14 +117,14 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 	if (IS_ERR(txbuf))
 		return PTR_ERR(txbuf);
 
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev) {
+	dev = lirc->dev;
+	if (!dev) {
 		ret = -EFAULT;
 		goto out;
 	}
 
-	if (ir_dev->props && ir_dev->props->tx_ir)
-		ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+	if (dev->tx_ir)
+		ret = dev->tx_ir(dev, txbuf, (u32)n);
 
 out:
 	kfree(txbuf);
@@ -136,21 +135,18 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 			unsigned long __user arg)
 {
 	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
+	struct rc_dev *dev;
 	int ret = 0;
-	void *drv_data;
 	__u32 val = 0, tmp;
 
 	lirc = lirc_get_pdata(filep);
 	if (!lirc)
 		return -EFAULT;
 
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+	dev = lirc->dev;
+	if (!dev)
 		return -EFAULT;
 
-	drv_data = ir_dev->props->priv;
-
 	if (_IOC_DIR(cmd) & _IOC_WRITE) {
 		ret = get_user(val, (__u32 *)arg);
 		if (ret)
@@ -171,84 +167,85 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 
 	/* TX settings */
 	case LIRC_SET_TRANSMITTER_MASK:
-		if (!ir_dev->props->s_tx_mask)
+		if (!dev->s_tx_mask)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_mask(drv_data, val);
+		return dev->s_tx_mask(dev, val);
 
 	case LIRC_SET_SEND_CARRIER:
-		if (!ir_dev->props->s_tx_carrier)
+		if (!dev->s_tx_carrier)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_carrier(drv_data, val);
+		return dev->s_tx_carrier(dev, val);
 
 	case LIRC_SET_SEND_DUTY_CYCLE:
-		if (!ir_dev->props->s_tx_duty_cycle)
+		if (!dev->s_tx_duty_cycle)
 			return -ENOSYS;
 
 		if (val <= 0 || val >= 100)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_duty_cycle(drv_data, val);
+		return dev->s_tx_duty_cycle(dev, val);
 
 	/* RX settings */
 	case LIRC_SET_REC_CARRIER:
-		if (!ir_dev->props->s_rx_carrier_range)
+		if (!dev->s_rx_carrier_range)
 			return -ENOSYS;
 
 		if (val <= 0)
 			return -EINVAL;
 
-		return ir_dev->props->s_rx_carrier_range(drv_data,
-			ir_dev->raw->lirc.carrier_low, val);
+		return dev->s_rx_carrier_range(dev,
+					       dev->raw->lirc.carrier_low,
+					       val);
 
 	case LIRC_SET_REC_CARRIER_RANGE:
 		if (val <= 0)
 			return -EINVAL;
 
-		ir_dev->raw->lirc.carrier_low = val;
+		dev->raw->lirc.carrier_low = val;
 		return 0;
 
 	case LIRC_GET_REC_RESOLUTION:
-		val = ir_dev->props->rx_resolution;
+		val = dev->rx_resolution;
 		break;
 
 	case LIRC_SET_WIDEBAND_RECEIVER:
-		if (!ir_dev->props->s_learning_mode)
+		if (!dev->s_learning_mode)
 			return -ENOSYS;
 
-		return ir_dev->props->s_learning_mode(drv_data, !!val);
+		return dev->s_learning_mode(dev, !!val);
 
 	case LIRC_SET_MEASURE_CARRIER_MODE:
-		if (!ir_dev->props->s_carrier_report)
+		if (!dev->s_carrier_report)
 			return -ENOSYS;
 
-		return ir_dev->props->s_carrier_report(drv_data, !!val);
+		return dev->s_carrier_report(dev, !!val);
 
 	/* Generic timeout support */
 	case LIRC_GET_MIN_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
-		val = ir_dev->props->min_timeout / 1000;
+		val = dev->min_timeout / 1000;
 		break;
 
 	case LIRC_GET_MAX_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
-		val = ir_dev->props->max_timeout / 1000;
+		val = dev->max_timeout / 1000;
 		break;
 
 	case LIRC_SET_REC_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
 
 		tmp = val * 1000;
 
-		if (tmp < ir_dev->props->min_timeout ||
-			tmp > ir_dev->props->max_timeout)
+		if (tmp < dev->min_timeout ||
+		    tmp > dev->max_timeout)
 				return -EINVAL;
 
-		ir_dev->props->timeout = tmp;
+		dev->timeout = tmp;
 		break;
 
 	case LIRC_SET_REC_TIMEOUT_REPORTS:
@@ -289,9 +286,8 @@ static struct file_operations lirc_fops = {
 	.llseek		= no_llseek,
 };
 
-static int ir_lirc_register(struct input_dev *input_dev)
+static int ir_lirc_register(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
 	struct lirc_driver *drv;
 	struct lirc_buffer *rbuf;
 	int rc = -ENOMEM;
@@ -310,44 +306,40 @@ static int ir_lirc_register(struct input_dev *input_dev)
 		goto rbuf_init_failed;
 
 	features = LIRC_CAN_REC_MODE2;
-	if (ir_dev->props->tx_ir) {
-
+	if (dev->tx_ir) {
 		features |= LIRC_CAN_SEND_PULSE;
-		if (ir_dev->props->s_tx_mask)
+		if (dev->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
-		if (ir_dev->props->s_tx_carrier)
+		if (dev->s_tx_carrier)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
-
-		if (ir_dev->props->s_tx_duty_cycle)
+		if (dev->s_tx_duty_cycle)
 			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
 	}
 
-	if (ir_dev->props->s_rx_carrier_range)
+	if (dev->s_rx_carrier_range)
 		features |= LIRC_CAN_SET_REC_CARRIER |
 			LIRC_CAN_SET_REC_CARRIER_RANGE;
 
-	if (ir_dev->props->s_learning_mode)
+	if (dev->s_learning_mode)
 		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
 
-	if (ir_dev->props->s_carrier_report)
+	if (dev->s_carrier_report)
 		features |= LIRC_CAN_MEASURE_CARRIER;
 
-
-	if (ir_dev->props->max_timeout)
+	if (dev->max_timeout)
 		features |= LIRC_CAN_SET_REC_TIMEOUT;
 
-
 	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
-		 ir_dev->driver_name);
+		 dev->driver_name);
 	drv->minor = -1;
 	drv->features = features;
-	drv->data = &ir_dev->raw->lirc;
+	drv->data = &dev->raw->lirc;
 	drv->rbuf = rbuf;
 	drv->set_use_inc = &ir_lirc_open;
 	drv->set_use_dec = &ir_lirc_close;
 	drv->code_length = sizeof(struct ir_raw_event) * 8;
 	drv->fops = &lirc_fops;
-	drv->dev = &ir_dev->dev;
+	drv->dev = &dev->dev;
 	drv->owner = THIS_MODULE;
 
 	drv->minor = lirc_register_driver(drv);
@@ -356,8 +348,8 @@ static int ir_lirc_register(struct input_dev *input_dev)
 		goto lirc_register_failed;
 	}
 
-	ir_dev->raw->lirc.drv = drv;
-	ir_dev->raw->lirc.ir_dev = ir_dev;
+	dev->raw->lirc.drv = drv;
+	dev->raw->lirc.dev = dev;
 	return 0;
 
 lirc_register_failed:
@@ -369,10 +361,9 @@ rbuf_alloc_failed:
 	return rc;
 }
 
-static int ir_lirc_unregister(struct input_dev *input_dev)
+static int ir_lirc_unregister(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+	struct lirc_codec *lirc = &dev->raw->lirc;
 
 	lirc_unregister_driver(lirc->drv->minor);
 	lirc_buffer_free(lirc->drv->rbuf);
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index cad4e994aa78..8ff157a140ca 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -39,19 +39,18 @@ enum nec_state {
 
 /**
  * ir_nec_decode() - Decode one NEC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @duration:	the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct nec_dec *data = &ir_dev->raw->nec;
+	struct nec_dec *data = &dev->raw->nec;
 	u32 scancode;
 	u8 address, not_address, command, not_command;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
+	if (!(dev->raw->enabled_protocols & IR_TYPE_NEC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -89,7 +88,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 			data->state = STATE_BIT_PULSE;
 			return 0;
 		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			ir_repeat(input_dev);
+			ir_repeat(dev);
 			IR_dprintk(1, "Repeat last key\n");
 			data->state = STATE_TRAILER_PULSE;
 			return 0;
@@ -115,7 +114,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 			geq_margin(ev.duration,
 			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
 				IR_dprintk(1, "Repeat last key\n");
-				ir_repeat(input_dev);
+				ir_repeat(dev);
 				data->state = STATE_INACTIVE;
 				return 0;
 
@@ -179,7 +178,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (data->is_nec_x)
 			data->necx_repeat = true;
 
-		ir_keydown(input_dev, scancode, 0);
+		ir_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index c07f6e0bb962..dae6f9a9b662 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -40,19 +40,18 @@ enum rc5_state {
 
 /**
  * ir_rc5_decode() - Decode one RC-5 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_dec *data = &ir_dev->raw->rc5;
+	struct rc5_dec *data = &dev->raw->rc5;
 	u8 toggle;
 	u32 scancode;
 
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+        if (!(dev->raw->enabled_protocols & IR_TYPE_RC5))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -96,7 +95,7 @@ again:
 		return 0;
 
 	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -151,7 +150,7 @@ again:
 				   scancode, toggle);
 		}
 
-		ir_keydown(input_dev, scancode, toggle);
+		ir_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index 0c3b6eb4ccd6..d8a53c02c1e4 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -36,19 +36,18 @@ enum rc5_sz_state {
 
 /**
  * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
+	struct rc5_sz_dec *data = &dev->raw->rc5_sz;
 	u8 toggle, command, system;
 	u32 scancode;
 
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+        if (!(dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -91,7 +90,7 @@ again:
 		return 0;
 
 	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -115,7 +114,7 @@ again:
 		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
 			   scancode, toggle);
 
-		ir_keydown(input_dev, scancode, toggle);
+		ir_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 48e82be5e01e..2435bbd1dbcc 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -70,19 +70,18 @@ static enum rc6_mode rc6_mode(struct rc6_dec *data)
 
 /**
  * ir_rc6_decode() - Decode one RC6 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc6_dec *data = &ir_dev->raw->rc6;
+	struct rc6_dec *data = &dev->raw->rc6;
 	u32 scancode;
 	u8 toggle;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
+	if (!(dev->raw->enabled_protocols & IR_TYPE_RC6))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -139,7 +138,7 @@ again:
 		return 0;
 
 	case STATE_HEADER_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == RC6_HEADER_NBITS)
@@ -159,7 +158,7 @@ again:
 		return 0;
 
 	case STATE_TOGGLE_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
+		if (!is_transition(&ev, &dev->raw->prev_ev) ||
 		    !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
 			break;
 
@@ -204,7 +203,7 @@ again:
 		return 0;
 
 	case STATE_BODY_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -243,7 +242,7 @@ again:
 			goto out;
 		}
 
-		ir_keydown(input_dev, scancode, toggle);
+		ir_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 0a5cadbf9bfb..3138520fb9e7 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -33,19 +33,18 @@ enum sony_state {
 
 /**
  * ir_sony_decode() - Decode one Sony pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:         the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct sony_dec *data = &ir_dev->raw->sony;
+	struct sony_dec *data = &dev->raw->sony;
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
+	if (!(dev->raw->enabled_protocols & IR_TYPE_SONY))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -144,7 +143,7 @@ static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 
 		scancode = device << 16 | subdevice << 8 | function;
 		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
-		ir_keydown(input_dev, scancode, 0);
+		ir_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 392ca24132da..539bec2974b7 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -35,7 +35,6 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
 #include <media/ir-core.h>
@@ -317,7 +316,7 @@ static struct usb_device_id mceusb_dev_table[] = {
 /* data structure for each usb transceiver */
 struct mceusb_dev {
 	/* ir-core bits */
-	struct ir_dev_props *props;
+	struct rc_dev *rc;
 
 	/* optional features we can enable */
 	bool carrier_report_enabled;
@@ -325,7 +324,6 @@ struct mceusb_dev {
 
 	/* core device bits */
 	struct device *dev;
-	struct input_dev *idev;
 
 	/* usb */
 	struct usb_device *usbdev;
@@ -663,9 +661,9 @@ static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
 }
 
 /* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 	int i, ret = 0;
 	int count, cmdcount = 0;
 	unsigned char *cmdbuf; /* MCE command buffer */
@@ -749,9 +747,9 @@ out:
 }
 
 /* Sets active IR outputs -- mce devices typically have two */
-static int mceusb_set_tx_mask(void *priv, u32 mask)
+static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 
 	if (ir->flags.tx_mask_normal)
 		ir->tx_mask = mask;
@@ -763,9 +761,9 @@ static int mceusb_set_tx_mask(void *priv, u32 mask)
 }
 
 /* Sets the send carrier frequency and mode */
-static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 	int clk = 10000000;
 	int prescaler = 0, divisor = 0;
 	unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
@@ -819,7 +817,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
 	switch (ir->buf_in[index]) {
 	/* 2-byte return value commands */
 	case MCE_CMD_S_TIMEOUT:
-		ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+		ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2);
 		break;
 
 	/* 1-byte return value commands */
@@ -866,7 +864,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
-			ir_raw_event_store_with_filter(ir->idev, &rawir);
+			ir_raw_event_store_with_filter(ir->rc, &rawir);
 			break;
 		case CMD_DATA:
 			ir->rem--;
@@ -893,7 +891,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			ir->parser_state = CMD_HEADER;
 	}
 	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
-	ir_raw_event_handle(ir->idev);
+	ir_raw_event_handle(ir->rc);
 }
 
 static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
@@ -1035,72 +1033,54 @@ static void mceusb_get_parameters(struct mceusb_dev *ir)
 	mce_sync_in(ir, NULL, maxp);
 }
 
-static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 {
-	struct input_dev *idev;
-	struct ir_dev_props *props;
 	struct device *dev = ir->dev;
-	const char *rc_map = RC_MAP_RC6_MCE;
-	const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
-	int ret = -ENODEV;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
+	struct rc_dev *rc;
+	int ret;
 
-	ret = -ENOMEM;
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
+	rc = rc_allocate_device();
+	if (!rc) {
+		dev_err(dev, "remote dev allocation failed\n");
+		goto out;
 	}
 
-	if (mceusb_model[ir->model].name)
-		name = mceusb_model[ir->model].name;
-
 	snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
-		 name,
+		 mceusb_model[ir->model].name ?
+		 	mceusb_model[ir->model].name :
+			"Media Center Ed. eHome Infrared Remote Transceiver",
 		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
 		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
 
-	idev->name = ir->name;
 	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
-	strlcat(ir->phys, "/input0", sizeof(ir->phys));
-	idev->phys = ir->phys;
 
-	props->priv = ir;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->timeout = MS_TO_NS(1000);
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	usb_to_input_id(ir->usbdev, &rc->input_id);
+	rc->dev.parent = dev;
+	rc->priv = ir;
+	rc->driver_type = RC_DRIVER_IR_RAW;
+	rc->allowed_protos = IR_TYPE_ALL;
+	rc->timeout = MS_TO_NS(1000);
 	if (!ir->flags.no_tx) {
-		props->s_tx_mask = mceusb_set_tx_mask;
-		props->s_tx_carrier = mceusb_set_tx_carrier;
-		props->tx_ir = mceusb_tx_ir;
+		rc->s_tx_mask = mceusb_set_tx_mask;
+		rc->s_tx_carrier = mceusb_set_tx_carrier;
+		rc->tx_ir = mceusb_tx_ir;
 	}
+	rc->driver_name = DRIVER_NAME;
+	rc->map_name = mceusb_model[ir->model].rc_map ?
+			mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE;
 
-	ir->props = props;
-
-	usb_to_input_id(ir->usbdev, &idev->id);
-	idev->dev.parent = ir->dev;
-
-	if (mceusb_model[ir->model].rc_map)
-		rc_map = mceusb_model[ir->model].rc_map;
-
-	ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
+	ret = rc_register_device(rc);
 	if (ret < 0) {
-		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
+		dev_err(dev, "remote dev registration failed\n");
+		goto out;
 	}
 
-	return idev;
+	return rc;
 
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
+out:
+	rc_free_device(rc);
 	return NULL;
 }
 
@@ -1212,9 +1192,9 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
 			 " %s", buf);
 
-	ir->idev = mceusb_init_input_dev(ir);
-	if (!ir->idev)
-		goto input_dev_fail;
+	ir->rc = mceusb_init_rc_dev(ir);
+	if (!ir->rc)
+		goto rc_dev_fail;
 
 	/* flush buffers on the device */
 	mce_sync_in(ir, NULL, maxp);
@@ -1235,7 +1215,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	mceusb_get_parameters(ir);
 
 	if (!ir->flags.no_tx)
-		mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+		mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK);
 
 	usb_set_intfdata(intf, ir);
 
@@ -1245,7 +1225,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	return 0;
 
 	/* Error-handling path */
-input_dev_fail:
+rc_dev_fail:
 	usb_free_urb(ir->urb_in);
 urb_in_alloc_fail:
 	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
@@ -1269,7 +1249,7 @@ static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
 		return;
 
 	ir->usbdev = NULL;
-	ir_input_unregister(ir->idev);
+	rc_unregister_device(ir->rc);
 	usb_kill_urb(ir->urb_in);
 	usb_free_urb(ir->urb_in);
 	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index acc729c79cec..0ce328f9dacf 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -32,7 +32,6 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/input.h>
 #include <media/ir-core.h>
 #include <linux/pci_ids.h>
 
@@ -476,9 +475,9 @@ static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
  * always set CP as 0x81
  * set CC by SPEC, CC = 3MHz/carrier - 1
  */
-static int nvt_set_tx_carrier(void *data, u32 carrier)
+static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 {
-	struct nvt_dev *nvt = data;
+	struct nvt_dev *nvt = dev->priv;
 	u16 val;
 
 	nvt_cir_reg_write(nvt, 1, CIR_CP);
@@ -509,9 +508,9 @@ static int nvt_set_tx_carrier(void *data, u32 carrier)
  * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
  * set TXFCONT as 0xff, until buf_count less than 0xff.
  */
-static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 {
-	struct nvt_dev *nvt = priv;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 	size_t cur_count;
 	unsigned int i;
@@ -948,9 +947,9 @@ static void nvt_disable_cir(struct nvt_dev *nvt)
 	nvt_efm_disable(nvt);
 }
 
-static int nvt_open(void *data)
+static int nvt_open(struct rc_dev *dev)
 {
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -961,9 +960,9 @@ static int nvt_open(void *data)
 	return 0;
 }
 
-static void nvt_close(void *data)
+static void nvt_close(struct rc_dev *dev)
 {
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -975,21 +974,16 @@ static void nvt_close(void *data)
 /* Allocate memory, probe hardware, and initialize everything */
 static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 {
-	struct nvt_dev *nvt = NULL;
-	struct input_dev *rdev = NULL;
-	struct ir_dev_props *props = NULL;
+	struct nvt_dev *nvt;
+	struct rc_dev *rdev;
 	int ret = -ENOMEM;
 
 	nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
 	if (!nvt)
 		return ret;
 
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props)
-		goto failure;
-
 	/* input device for IR remote (and tx) */
-	rdev = input_allocate_device();
+	rdev = rc_allocate_device();
 	if (!rdev)
 		goto failure;
 
@@ -1063,41 +1057,38 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	nvt_cir_regs_init(nvt);
 	nvt_cir_wake_regs_init(nvt);
 
-	/* Set up ir-core props */
-	props->priv = nvt;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->open = nvt_open;
-	props->close = nvt_close;
+	/* Set up the rc device */
+	rdev->priv = nvt;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->open = nvt_open;
+	rdev->close = nvt_close;
+	rdev->tx_ir = nvt_tx_ir;
+	rdev->s_tx_carrier = nvt_set_tx_carrier;
+	rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = PCI_VENDOR_ID_WINBOND2;
+	rdev->input_id.product = nvt->chip_major;
+	rdev->input_id.version = nvt->chip_minor;
+	rdev->driver_name = NVT_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
 #if 0
-	props->min_timeout = XYZ;
-	props->max_timeout = XYZ;
-	props->timeout = XYZ;
+	rdev->min_timeout = XYZ;
+	rdev->max_timeout = XYZ;
+	rdev->timeout = XYZ;
 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
-	props->rx_resolution = XYZ;
-
+	rdev->rx_resolution = XYZ;
 	/* tx bits */
-	props->tx_resolution = XYZ;
+	rdev->tx_resolution = XYZ;
 #endif
-	props->tx_ir = nvt_tx_ir;
-	props->s_tx_carrier = nvt_set_tx_carrier;
-
-	rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
-	rdev->id.bustype = BUS_HOST;
-	rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
-	rdev->id.product = nvt->chip_major;
-	rdev->id.version = nvt->chip_minor;
-
-	nvt->props = props;
-	nvt->rdev = rdev;
 
-	device_set_wakeup_capable(&pdev->dev, 1);
-	device_set_wakeup_enable(&pdev->dev, 1);
-
-	ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+	ret = rc_register_device(rdev);
 	if (ret)
 		goto failure;
 
+	device_set_wakeup_capable(&pdev->dev, 1);
+	device_set_wakeup_enable(&pdev->dev, 1);
+	nvt->rdev = rdev;
 	nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
 	if (debug) {
 		cir_dump_regs(nvt);
@@ -1117,8 +1108,7 @@ failure:
 	if (nvt->cir_wake_addr)
 		release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
 
-	input_free_device(rdev);
-	kfree(props);
+	rc_free_device(rdev);
 	kfree(nvt);
 
 	return ret;
@@ -1143,9 +1133,8 @@ static void __devexit nvt_remove(struct pnp_dev *pdev)
 	release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
 	release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
 
-	ir_input_unregister(nvt->rdev);
+	rc_unregister_device(nvt->rdev);
 
-	kfree(nvt->props);
 	kfree(nvt);
 }
 
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 62dc53017c8e..1df82351cb03 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -66,8 +66,7 @@ static int debug;
 
 struct nvt_dev {
 	struct pnp_dev *pdev;
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 4be075780ad0..3616c32d3f87 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -24,11 +24,11 @@ struct ir_raw_handler {
 	struct list_head list;
 
 	u64 protocols; /* which are handled by this handler */
-	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+	int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
 
 	/* These two should only be used by the lirc decoder */
-	int (*raw_register)(struct input_dev *input_dev);
-	int (*raw_unregister)(struct input_dev *input_dev);
+	int (*raw_register)(struct rc_dev *dev);
+	int (*raw_unregister)(struct rc_dev *dev);
 };
 
 struct ir_raw_event_ctrl {
@@ -38,7 +38,7 @@ struct ir_raw_event_ctrl {
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
-	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
+	struct rc_dev			*dev;		/* pointer to the parent rc_dev */
 	u64				enabled_protocols; /* enabled raw protocol decoders */
 
 	/* raw decoder state follows */
@@ -85,7 +85,7 @@ struct ir_raw_event_ctrl {
 		unsigned wanted_bits;
 	} rc5_sz;
 	struct lirc_codec {
-		struct ir_input_dev *ir_dev;
+		struct rc_dev *dev;
 		struct lirc_driver *drv;
 		int carrier_low;
 
@@ -131,11 +131,11 @@ static inline bool is_timing_event(struct ir_raw_event ev)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
 
 /*
- * Routines from ir-raw-event.c to be used internally and by decoders
+ * Routines from rc-raw.c to be used internally and by decoders
  */
 u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_event_register(struct rc_dev *dev);
+void ir_raw_event_unregister(struct rc_dev *dev);
 int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 67a6bd5d9497..5b67eea96ebb 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -20,11 +20,6 @@
 #include <linux/device.h>
 #include "rc-core-priv.h"
 
-#define IRRCV_NUM_DEVICES	256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
 /* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
 #define IR_TAB_MIN_SIZE	256
 #define IR_TAB_MAX_SIZE	8192
@@ -36,12 +31,6 @@ static unsigned long ir_core_dev_number;
 static LIST_HEAD(rc_map_list);
 static DEFINE_SPINLOCK(rc_map_lock);
 
-/* Forward declarations */
-static int ir_register_class(struct input_dev *input_dev);
-static void ir_unregister_class(struct input_dev *input_dev);
-static int ir_register_input(struct input_dev *input_dev);
-
-
 static struct rc_keymap *seek_rc_map(const char *name)
 {
 	struct rc_keymap *map = NULL;
@@ -127,7 +116,7 @@ static struct rc_keymap empty_map = {
  * @return:	zero on success or a negative error code
  *
  * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
+ * memory to hold at least the specified number of elements.
  */
 static int ir_create_table(struct ir_scancode_table *rc_tab,
 			   const char *name, u64 ir_type, size_t size)
@@ -209,16 +198,16 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
 
 /**
  * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @rc_tab:	scancode table to be adjusted
  * @index:	index of the mapping that needs to be updated
  * @keycode:	the desired keycode
  * @return:	previous keycode assigned to the mapping
  *
- * This routine is used to update scancode->keycopde mapping at given
+ * This routine is used to update scancode->keycode mapping at given
  * position.
  */
-static unsigned int ir_update_mapping(struct input_dev *dev,
+static unsigned int ir_update_mapping(struct rc_dev *dev,
 				      struct ir_scancode_table *rc_tab,
 				      unsigned int index,
 				      unsigned int new_keycode)
@@ -239,16 +228,16 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
 			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
 			   rc_tab->scan[index].scancode, new_keycode);
 		rc_tab->scan[index].keycode = new_keycode;
-		__set_bit(new_keycode, dev->keybit);
+		__set_bit(new_keycode, dev->input_dev->keybit);
 	}
 
 	if (old_keycode != KEY_RESERVED) {
 		/* A previous mapping was updated... */
-		__clear_bit(old_keycode, dev->keybit);
+		__clear_bit(old_keycode, dev->input_dev->keybit);
 		/* ... but another scancode might use the same keycode */
 		for (i = 0; i < rc_tab->len; i++) {
 			if (rc_tab->scan[i].keycode == old_keycode) {
-				__set_bit(old_keycode, dev->keybit);
+				__set_bit(old_keycode, dev->input_dev->keybit);
 				break;
 			}
 		}
@@ -262,7 +251,7 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
 
 /**
  * ir_establish_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev:	the struct ir_input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @rc_tab:	scancode table to be searched
  * @scancode:	the desired scancode
  * @resize:	controls whether we allowed to resize the table to
@@ -274,7 +263,7 @@ static unsigned int ir_update_mapping(struct input_dev *dev,
  * If scancode is not yet present the routine will allocate a new slot
  * for it.
  */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+static unsigned int ir_establish_scancode(struct rc_dev *dev,
 					  struct ir_scancode_table *rc_tab,
 					  unsigned int scancode,
 					  bool resize)
@@ -286,10 +275,11 @@ static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
 	 * all bits for the complete IR code. In general, they provide only
 	 * the command part of the IR code. Yet, as it is possible to replace
 	 * the provided IR with another one, it is needed to allow loading
-	 * IR tables from other remotes. So,
+	 * IR tables from other remotes. So, we support specifying a mask to
+	 * indicate the valid bits of the scancodes.
 	 */
-	if (ir_dev->props && ir_dev->props->scanmask)
-		scancode &= ir_dev->props->scanmask;
+	if (dev->scanmask)
+		scancode &= dev->scanmask;
 
 	/* First check if we already have a mapping for this ir command */
 	for (i = 0; i < rc_tab->len; i++) {
@@ -320,19 +310,19 @@ static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
 
 /**
  * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
+ * @idev:	the struct input_dev device descriptor
  * @scancode:	the desired scancode
  * @keycode:	result
  * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
  *
  * This routine is used to handle evdev EVIOCSKEY ioctl.
  */
-static int ir_setkeycode(struct input_dev *dev,
+static int ir_setkeycode(struct input_dev *idev,
 			 const struct input_keymap_entry *ke,
 			 unsigned int *old_keycode)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct rc_dev *rdev = input_get_drvdata(idev);
+	struct ir_scancode_table *rc_tab = &rdev->rc_tab;
 	unsigned int index;
 	unsigned int scancode;
 	int retval;
@@ -351,14 +341,14 @@ static int ir_setkeycode(struct input_dev *dev,
 		if (retval)
 			goto out;
 
-		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+		index = ir_establish_scancode(rdev, rc_tab, scancode, true);
 		if (index >= rc_tab->len) {
 			retval = -ENOMEM;
 			goto out;
 		}
 	}
 
-	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+	*old_keycode = ir_update_mapping(rdev, rc_tab, index, ke->keycode);
 
 out:
 	spin_unlock_irqrestore(&rc_tab->lock, flags);
@@ -367,22 +357,22 @@ out:
 
 /**
  * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @to:		the struct ir_scancode_table to copy entries to
  * @from:	the struct ir_scancode_table to copy entries from
  * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
  *
  * This routine is used to handle table initialization.
  */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
+static int ir_setkeytable(struct rc_dev *dev,
 			  const struct ir_scancode_table *from)
 {
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct ir_scancode_table *rc_tab = &dev->rc_tab;
 	unsigned int i, index;
 	int rc;
 
-	rc = ir_create_table(&ir_dev->rc_tab,
-			     from->name, from->ir_type, from->size);
+	rc = ir_create_table(rc_tab, from->name,
+			     from->ir_type, from->size);
 	if (rc)
 		return rc;
 
@@ -390,14 +380,14 @@ static int ir_setkeytable(struct ir_input_dev *ir_dev,
 		   rc_tab->size, rc_tab->alloc);
 
 	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(ir_dev, rc_tab,
+		index = ir_establish_scancode(dev, rc_tab,
 					      from->scan[i].scancode, false);
 		if (index >= rc_tab->len) {
 			rc = -ENOMEM;
 			break;
 		}
 
-		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+		ir_update_mapping(dev, rc_tab, index,
 				  from->scan[i].keycode);
 	}
 
@@ -409,7 +399,7 @@ static int ir_setkeytable(struct ir_input_dev *ir_dev,
 
 /**
  * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab:	the &struct ir_scancode_table to search
+ * @rc_tab:	the struct ir_scancode_table to search
  * @scancode:	scancode to look for in the table
  * @return:	index in the table, -1U if not found
  *
@@ -438,18 +428,18 @@ static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab
 
 /**
  * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
+ * @idev:	the struct input_dev device descriptor
  * @scancode:	the desired scancode
  * @keycode:	used to return the keycode, if found, or KEY_RESERVED
  * @return:	always returns zero.
  *
  * This routine is used to handle evdev EVIOCGKEY ioctl.
  */
-static int ir_getkeycode(struct input_dev *dev,
+static int ir_getkeycode(struct input_dev *idev,
 			 struct input_keymap_entry *ke)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct rc_dev *rdev = input_get_drvdata(idev);
+	struct ir_scancode_table *rc_tab = &rdev->rc_tab;
 	struct ir_scancode *entry;
 	unsigned long flags;
 	unsigned int index;
@@ -492,18 +482,17 @@ out:
 
 /**
  * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev:	the struct input_dev descriptor of the device
- * @scancode:	the scancode that we're seeking
+ * @dev:	the struct rc_dev descriptor of the device
+ * @scancode:	the scancode to look for
+ * @return:	the corresponding keycode, or KEY_RESERVED
  *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
+ * This routine is used by drivers which need to convert a scancode to a
+ * keycode. Normally it should not be used since drivers should have no
+ * interest in keycodes.
  */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+	struct ir_scancode_table *rc_tab = &dev->rc_tab;
 	unsigned int keycode;
 	unsigned int index;
 	unsigned long flags;
@@ -518,7 +507,7 @@ u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
 
 	if (keycode != KEY_RESERVED)
 		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
-			   dev->name, scancode, keycode);
+			   dev->input_name, scancode, keycode);
 
 	return keycode;
 }
@@ -526,50 +515,49 @@ EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
 
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
- * @ir:         the struct ir_input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  *
  * This function is used internally to release a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keyup(struct ir_input_dev *ir)
+static void ir_do_keyup(struct rc_dev *dev)
 {
-	if (!ir->keypressed)
+	if (!dev->keypressed)
 		return;
 
-	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
-	input_report_key(ir->input_dev, ir->last_keycode, 0);
-	input_sync(ir->input_dev);
-	ir->keypressed = false;
+	IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
+	input_report_key(dev->input_dev, dev->last_keycode, 0);
+	input_sync(dev->input_dev);
+	dev->keypressed = false;
 }
 
 /**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev:        the struct input_dev descriptor of the device
+ * ir_keyup() - signals the release of a keypress
+ * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used to signal that a key has been released on the
  * remote control.
  */
-void ir_keyup(struct input_dev *dev)
+void ir_keyup(struct rc_dev *dev)
 {
 	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
 
-	spin_lock_irqsave(&ir->keylock, flags);
-	ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
+	spin_lock_irqsave(&dev->keylock, flags);
+	ir_do_keyup(dev);
+	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_keyup);
 
 /**
  * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
+ * @cookie:	a pointer to the struct rc_dev for the device
  *
  * This routine will generate a keyup event some time after a keydown event
  * is generated when no further activity has been detected.
  */
 static void ir_timer_keyup(unsigned long cookie)
 {
-	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+	struct rc_dev *dev = (struct rc_dev *)cookie;
 	unsigned long flags;
 
 	/*
@@ -582,43 +570,42 @@ static void ir_timer_keyup(unsigned long cookie)
 	 * to allow the input subsystem to do its auto-repeat magic or
 	 * a keyup event might follow immediately after the keydown.
 	 */
-	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
-		ir_do_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
+	spin_lock_irqsave(&dev->keylock, flags);
+	if (time_is_before_eq_jiffies(dev->keyup_jiffies))
+		ir_do_keyup(dev);
+	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 
 /**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev:        the struct input_dev descriptor of the device
+ * ir_repeat() - signals that a key is still pressed
+ * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used by IR decoders when a repeat message which does
  * not include the necessary bits to reproduce the scancode has been
  * received.
  */
-void ir_repeat(struct input_dev *dev)
+void ir_repeat(struct rc_dev *dev)
 {
 	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
 
-	spin_lock_irqsave(&ir->keylock, flags);
+	spin_lock_irqsave(&dev->keylock, flags);
 
-	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
 
-	if (!ir->keypressed)
+	if (!dev->keypressed)
 		goto out;
 
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+	dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+	mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
 
 out:
-	spin_unlock_irqrestore(&ir->keylock, flags);
+	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_repeat);
 
 /**
  * ir_do_keydown() - internal function to process a keypress
- * @dev:        the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode of the keypress
  * @keycode:    the keycode of the keypress
  * @toggle:     the toggle value of the keypress
@@ -626,231 +613,96 @@ EXPORT_SYMBOL_GPL(ir_repeat);
  * This function is used internally to register a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keydown(struct input_dev *dev, int scancode,
+static void ir_do_keydown(struct rc_dev *dev, int scancode,
 			  u32 keycode, u8 toggle)
 {
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	input_event(dev, EV_MSC, MSC_SCAN, scancode);
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
 	/* Repeat event? */
-	if (ir->keypressed &&
-	    ir->last_scancode == scancode &&
-	    ir->last_toggle == toggle)
+	if (dev->keypressed &&
+	    dev->last_scancode == scancode &&
+	    dev->last_toggle == toggle)
 		return;
 
 	/* Release old keypress */
-	ir_do_keyup(ir);
+	ir_do_keyup(dev);
 
-	ir->last_scancode = scancode;
-	ir->last_toggle = toggle;
-	ir->last_keycode = keycode;
+	dev->last_scancode = scancode;
+	dev->last_toggle = toggle;
+	dev->last_keycode = keycode;
 
 	if (keycode == KEY_RESERVED)
 		return;
 
 	/* Register a keypress */
-	ir->keypressed = true;
+	dev->keypressed = true;
 	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->name, keycode, scancode);
-	input_report_key(dev, ir->last_keycode, 1);
-	input_sync(dev);
+		   dev->input_name, keycode, scancode);
+	input_report_key(dev->input_dev, dev->last_keycode, 1);
+	input_sync(dev->input_dev);
 }
 
 /**
  * ir_keydown() - generates input event for a key press
- * @dev:        the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
  *              support toggle values, this should be set to zero)
  *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
+ * This routine is used to signal that a key has been pressed on the
+ * remote control.
  */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
 	u32 keycode = ir_g_keycode_from_table(dev, scancode);
 
-	spin_lock_irqsave(&ir->keylock, flags);
+	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
 
-	if (ir->keypressed) {
-		ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-		mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+	if (dev->keypressed) {
+		dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+		mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
 	}
-	spin_unlock_irqrestore(&ir->keylock, flags);
+	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_keydown);
 
 /**
  * ir_keydown_notimeout() - generates input event for a key press without
  *                          an automatic keyup event at a later time
- * @dev:        the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
  *              support toggle values, this should be set to zero)
  *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
+ * This routine is used to signal that a key has been pressed on the
+ * remote control. The driver must manually call ir_keyup() at a later stage.
  */
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
 	u32 keycode = ir_g_keycode_from_table(dev, scancode);
 
-	spin_lock_irqsave(&ir->keylock, flags);
+	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
-	spin_unlock_irqrestore(&ir->keylock, flags);
+	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
 
-static int ir_open(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- *			    for keymap table get/set
- * @input_dev:	the struct input_dev descriptor of the device
- * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
-		      const struct ir_scancode_table *rc_tab,
-		      struct ir_dev_props *props,
-		      const char *driver_name)
+static int ir_open(struct input_dev *idev)
 {
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (rc_tab->scan == NULL || !rc_tab->size)
-		return -EINVAL;
-
-	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
-	if (!ir_dev)
-		return -ENOMEM;
-
-	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
-	if (!ir_dev->driver_name) {
-		rc = -ENOMEM;
-		goto out_dev;
-	}
-
-	input_dev->getkeycode_new = ir_getkeycode;
-	input_dev->setkeycode_new = ir_setkeycode;
-	input_set_drvdata(input_dev, ir_dev);
-	ir_dev->input_dev = input_dev;
-
-	spin_lock_init(&ir_dev->rc_tab.lock);
-	spin_lock_init(&ir_dev->keylock);
-	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
-	if (props) {
-		ir_dev->props = props;
-		if (props->open)
-			input_dev->open = ir_open;
-		if (props->close)
-			input_dev->close = ir_close;
-	}
-
-	set_bit(EV_KEY, input_dev->evbit);
-	set_bit(EV_REP, input_dev->evbit);
-	set_bit(EV_MSC, input_dev->evbit);
-	set_bit(MSC_SCAN, input_dev->mscbit);
-
-	rc = ir_setkeytable(ir_dev, rc_tab);
-	if (rc)
-		goto out_name;
+	struct rc_dev *rdev = input_get_drvdata(idev);
 
-	rc = ir_register_class(input_dev);
-	if (rc < 0)
-		goto out_table;
-
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-			rc = ir_raw_event_register(input_dev);
-			if (rc < 0)
-				goto out_event;
-		}
-
-	rc = ir_register_input(input_dev);
-	if (rc < 0)
-		goto out_event;
-
-	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
-		   driver_name, rc_tab->name,
-		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
-			" in raw mode" : "");
-
-	/*
-	 * Default delay of 250ms is too short for some protocols, expecially
-	 * since the timeout is currently set to 250ms. Increase it to 500ms,
-	 * to avoid wrong repetition of the keycodes.
-	 */
-	input_dev->rep[REP_DELAY] = 500;
-
-	return 0;
-
-out_event:
-	ir_unregister_class(input_dev);
-out_table:
-	ir_free_table(&ir_dev->rc_tab);
-out_name:
-	kfree(ir_dev->driver_name);
-out_dev:
-	kfree(ir_dev);
-	return rc;
+	return rdev->open(rdev);
 }
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev:	the struct input_dev descriptor of the device
 
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
+static void ir_close(struct input_dev *idev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	if (!ir_dev)
-		return;
-
-	IR_dprintk(1, "Freed keycode table\n");
+	struct rc_dev *rdev = input_get_drvdata(idev);
 
-	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-			ir_raw_event_unregister(input_dev);
-
-	ir_free_table(&ir_dev->rc_tab);
-
-	ir_unregister_class(input_dev);
-
-	kfree(ir_dev->driver_name);
-	kfree(ir_dev);
+	rdev->close(rdev);
 }
-EXPORT_SYMBOL_GPL(ir_input_unregister);
 
 /* class for /sys/class/rc */
 static char *ir_devnode(struct device *dev, mode_t *mode)
@@ -881,7 +733,7 @@ static struct {
 
 /**
  * show_protocols() - shows the current IR protocol(s)
- * @d:		the device descriptor
+ * @device:	the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the output buffer
  *
@@ -890,26 +742,25 @@ static struct {
  * It returns the protocol names of supported protocols.
  * Enabled protocols are printed in brackets.
  */
-static ssize_t show_protocols(struct device *d,
+static ssize_t show_protocols(struct device *device,
 			      struct device_attribute *mattr, char *buf)
 {
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	struct rc_dev *dev = to_rc_dev(device);
 	u64 allowed, enabled;
 	char *tmp = buf;
 	int i;
 
 	/* Device is being removed */
-	if (!ir_dev)
+	if (!dev)
 		return -EINVAL;
 
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = ir_dev->rc_tab.ir_type;
-		allowed = ir_dev->props->allowed_protos;
-	} else if (ir_dev->raw) {
-		enabled = ir_dev->raw->enabled_protocols;
+	if (dev->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = dev->rc_tab.ir_type;
+		allowed = dev->allowed_protos;
+	} else {
+		enabled = dev->raw->enabled_protocols;
 		allowed = ir_raw_get_allowed_protocols();
-	} else
-		return sprintf(tmp, "[builtin]\n");
+	}
 
 	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
 		   (long long)allowed,
@@ -930,12 +781,12 @@ static ssize_t show_protocols(struct device *d,
 
 /**
  * store_protocols() - changes the current IR protocol(s)
- * @d:		the device descriptor
+ * @device:	the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the input buffer
  * @len:	length of the input buffer
  *
- * This routine is a callback routine for changing the IR protocol type.
+ * This routine is for changing the IR protocol type.
  * It is trigged by writing to /sys/class/rc/rc?/protocols.
  * Writing "+proto" will add a protocol to the list of enabled protocols.
  * Writing "-proto" will remove a protocol from the list of enabled protocols.
@@ -944,12 +795,12 @@ static ssize_t show_protocols(struct device *d,
  * Returns -EINVAL if an invalid protocol combination or unknown protocol name
  * is used, otherwise @len.
  */
-static ssize_t store_protocols(struct device *d,
+static ssize_t store_protocols(struct device *device,
 			       struct device_attribute *mattr,
 			       const char *data,
 			       size_t len)
 {
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	struct rc_dev *dev = to_rc_dev(device);
 	bool enable, disable;
 	const char *tmp;
 	u64 type;
@@ -958,13 +809,13 @@ static ssize_t store_protocols(struct device *d,
 	unsigned long flags;
 
 	/* Device is being removed */
-	if (!ir_dev)
+	if (!dev)
 		return -EINVAL;
 
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else if (ir_dev->raw)
-		type = ir_dev->raw->enabled_protocols;
+	if (dev->driver_type == RC_DRIVER_SCANCODE)
+		type = dev->rc_tab.ir_type;
+	else if (dev->raw)
+		type = dev->raw->enabled_protocols;
 	else {
 		IR_dprintk(1, "Protocol switching not supported\n");
 		return -EINVAL;
@@ -1019,9 +870,8 @@ static ssize_t store_protocols(struct device *d,
 		return -EINVAL;
 	}
 
-	if (ir_dev->props && ir_dev->props->change_protocol) {
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    type);
+	if (dev->change_protocol) {
+		rc = dev->change_protocol(dev, type);
 		if (rc < 0) {
 			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
 				   (long long)type);
@@ -1029,12 +879,12 @@ static ssize_t store_protocols(struct device *d,
 		}
 	}
 
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-		ir_dev->rc_tab.ir_type = type;
-		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+	if (dev->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&dev->rc_tab.lock, flags);
+		dev->rc_tab.ir_type = type;
+		spin_unlock_irqrestore(&dev->rc_tab.lock, flags);
 	} else {
-		ir_dev->raw->enabled_protocols = type;
+		dev->raw->enabled_protocols = type;
 	}
 
 	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
@@ -1043,6 +893,14 @@ static ssize_t store_protocols(struct device *d,
 	return len;
 }
 
+static void rc_dev_release(struct device *device)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+
+	kfree(dev);
+	module_put(THIS_MODULE);
+}
+
 #define ADD_HOTPLUG_VAR(fmt, val...)					\
 	do {								\
 		int err = add_uevent_var(env, fmt, val);		\
@@ -1052,12 +910,12 @@ static ssize_t store_protocols(struct device *d,
 
 static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 {
-	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+	struct rc_dev *dev = to_rc_dev(device);
 
-	if (ir_dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
-	if (ir_dev->driver_name)
-		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+	if (dev->rc_tab.name)
+		ADD_HOTPLUG_VAR("NAME=%s", dev->rc_tab.name);
+	if (dev->driver_name)
+		ADD_HOTPLUG_VAR("DRV_NAME=%s", dev->driver_name);
 
 	return 0;
 }
@@ -1084,84 +942,162 @@ static const struct attribute_group *rc_dev_attr_groups[] = {
 
 static struct device_type rc_dev_type = {
 	.groups		= rc_dev_attr_groups,
+	.release	= rc_dev_release,
 	.uevent		= rc_dev_uevent,
 };
 
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-static int ir_register_class(struct input_dev *input_dev)
+struct rc_dev *rc_allocate_device(void)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int devno = find_first_zero_bit(&ir_core_dev_number,
-					IRRCV_NUM_DEVICES);
-
-	if (unlikely(devno < 0))
-		return devno;
-
-	ir_dev->dev.type = &rc_dev_type;
-	ir_dev->devno = devno;
-
-	ir_dev->dev.class = &ir_input_class;
-	ir_dev->dev.parent = input_dev->dev.parent;
-	input_dev->dev.parent = &ir_dev->dev;
-	dev_set_name(&ir_dev->dev, "rc%d", devno);
-	dev_set_drvdata(&ir_dev->dev, ir_dev);
-	return  device_register(&ir_dev->dev);
-};
+	struct rc_dev *dev;
 
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev:	the struct input_dev descriptor of the device
- */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	dev->input_dev = input_allocate_device();
+	if (!dev->input_dev) {
+		kfree(dev);
+		return NULL;
+	}
+
+	dev->input_dev->getkeycode_new = ir_getkeycode;
+	dev->input_dev->setkeycode_new = ir_setkeycode;
+	input_set_drvdata(dev->input_dev, dev);
+
+	spin_lock_init(&dev->rc_tab.lock);
+	spin_lock_init(&dev->keylock);
+	setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
 
-static int ir_register_input(struct input_dev *input_dev)
+	dev->dev.type = &rc_dev_type;
+	dev->dev.class = &ir_input_class;
+	device_initialize(&dev->dev);
+
+	__module_get(THIS_MODULE);
+	return dev;
+}
+EXPORT_SYMBOL_GPL(rc_allocate_device);
+
+void rc_free_device(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int rc;
+	if (dev) {
+		input_free_device(dev->input_dev);
+		put_device(&dev->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(rc_free_device);
+
+int rc_register_device(struct rc_dev *dev)
+{
+	static atomic_t devno = ATOMIC_INIT(0);
+	struct ir_scancode_table *rc_tab;
 	const char *path;
+	int rc;
 
+	if (!dev || !dev->map_name)
+		return -EINVAL;
 
-	rc = input_register_device(input_dev);
-	if (rc < 0) {
-		device_del(&ir_dev->dev);
+	rc_tab = get_rc_map(dev->map_name);
+	if (!rc_tab)
+		rc_tab = get_rc_map(RC_MAP_EMPTY);
+	if (!rc_tab || !rc_tab->scan || rc_tab->size == 0)
+		return -EINVAL;
+
+	set_bit(EV_KEY, dev->input_dev->evbit);
+	set_bit(EV_REP, dev->input_dev->evbit);
+	set_bit(EV_MSC, dev->input_dev->evbit);
+	set_bit(MSC_SCAN, dev->input_dev->mscbit);
+	if (dev->open)
+		dev->input_dev->open = ir_open;
+	if (dev->close)
+		dev->input_dev->close = ir_close;
+
+	dev->devno = (unsigned long)(atomic_inc_return(&devno) - 1);
+	dev_set_name(&dev->dev, "rc%ld", dev->devno);
+	dev_set_drvdata(&dev->dev, dev);
+	rc = device_add(&dev->dev);
+	if (rc)
 		return rc;
-	}
 
-	__module_get(THIS_MODULE);
+	rc = ir_setkeytable(dev, rc_tab);
+	if (rc)
+		goto out_dev;
+
+	dev->input_dev->dev.parent = &dev->dev;
+	memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+	dev->input_dev->phys = dev->input_phys;
+	dev->input_dev->name = dev->input_name;
+	rc = input_register_device(dev->input_dev);
+	if (rc)
+		goto out_table;
 
-	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes. Note that this must be
+	 * set after the call to input_register_device().
+	 */
+	dev->input_dev->rep[REP_DELAY] = 500;
+
+	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
 	printk(KERN_INFO "%s: %s as %s\n",
-		dev_name(&ir_dev->dev),
-		input_dev->name ? input_dev->name : "Unspecified device",
+		dev_name(&dev->dev),
+		dev->input_name ? dev->input_name : "Unspecified device",
 		path ? path : "N/A");
 	kfree(path);
 
-	set_bit(ir_dev->devno, &ir_core_dev_number);
+	if (dev->driver_type == RC_DRIVER_IR_RAW) {
+		rc = ir_raw_event_register(dev);
+		if (rc < 0)
+			goto out_input;
+	}
+
+	if (dev->change_protocol) {
+		rc = dev->change_protocol(dev, rc_tab->ir_type);
+		if (rc < 0)
+			goto out_raw;
+	}
+
+	IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
+		   dev->devno,
+		   dev->driver_name ? dev->driver_name : "unknown",
+		   rc_tab->name ? rc_tab->name : "unknown",
+		   dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+
 	return 0;
+
+out_raw:
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		ir_raw_event_unregister(dev);
+out_input:
+	input_unregister_device(dev->input_dev);
+	dev->input_dev = NULL;
+out_table:
+	ir_free_table(&dev->rc_tab);
+out_dev:
+	device_del(&dev->dev);
+	return rc;
 }
+EXPORT_SYMBOL_GPL(rc_register_device);
 
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- *			   /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-static void ir_unregister_class(struct input_dev *input_dev)
+void rc_unregister_device(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	if (!dev)
+		return;
 
-	input_set_drvdata(input_dev, NULL);
-	clear_bit(ir_dev->devno, &ir_core_dev_number);
-	input_unregister_device(input_dev);
-	device_del(&ir_dev->dev);
+	del_timer_sync(&dev->timer_keyup);
 
-	module_put(THIS_MODULE);
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		ir_raw_event_unregister(dev);
+
+	input_unregister_device(dev->input_dev);
+	dev->input_dev = NULL;
+
+	ir_free_table(&dev->rc_tab);
+	IR_dprintk(1, "Freed keycode table\n");
+
+	device_unregister(&dev->dev);
 }
+EXPORT_SYMBOL_GPL(rc_unregister_device);
 
 /*
  * Init/exit code for the module. Basically, creates/removes /sys/class/rc
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
index d6c556e3f0d8..ab9b1e4071c0 100644
--- a/drivers/media/rc/rc-raw.c
+++ b/drivers/media/rc/rc-raw.c
@@ -64,7 +64,7 @@ static int ir_raw_event_thread(void *data)
 
 		mutex_lock(&ir_raw_handler_lock);
 		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
+			handler->decode(raw->dev, ev);
 		raw->prev_ev = ev;
 		mutex_unlock(&ir_raw_handler_lock);
 	}
@@ -74,7 +74,7 @@ static int ir_raw_event_thread(void *data)
 
 /**
  * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This routine (which may be called from an interrupt context) stores a
@@ -82,17 +82,15 @@ static int ir_raw_event_thread(void *data)
  * signalled as positive values and spaces as negative values. A zero value
  * will reset the decoding state machines.
  */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
-	if (!ir->raw)
+	if (!dev->raw)
 		return -EINVAL;
 
 	IR_dprintk(2, "sample: (%05dus %s)\n",
-		TO_US(ev->duration), TO_STR(ev->pulse));
+		   TO_US(ev->duration), TO_STR(ev->pulse));
 
-	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+	if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
 		return -ENOMEM;
 
 	return 0;
@@ -101,7 +99,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
 
 /**
  * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @type:	the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) is used to
@@ -110,50 +108,49 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
  * hardware which does not provide durations directly but only interrupts
  * (or similar events) on state change.
  */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
 {
-	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
 	ktime_t			now;
 	s64			delta; /* ns */
 	struct ir_raw_event	ev;
 	int			rc = 0;
 
-	if (!ir->raw)
+	if (!dev->raw)
 		return -EINVAL;
 
 	now = ktime_get();
-	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
 
 	/* Check for a long duration since last event or if we're
 	 * being called for the first time, note that delta can't
 	 * possibly be negative.
 	 */
 	ev.duration = 0;
-	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
 		type |= IR_START_EVENT;
 	else
 		ev.duration = delta;
 
 	if (type & IR_START_EVENT)
-		ir_raw_event_reset(input_dev);
-	else if (ir->raw->last_type & IR_SPACE) {
+		ir_raw_event_reset(dev);
+	else if (dev->raw->last_type & IR_SPACE) {
 		ev.pulse = false;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else if (ir->raw->last_type & IR_PULSE) {
+		rc = ir_raw_event_store(dev, &ev);
+	} else if (dev->raw->last_type & IR_PULSE) {
 		ev.pulse = true;
-		rc = ir_raw_event_store(input_dev, &ev);
+		rc = ir_raw_event_store(dev, &ev);
 	} else
 		return 0;
 
-	ir->raw->last_event = now;
-	ir->raw->last_type = type;
+	dev->raw->last_event = now;
+	dev->raw->last_type = type;
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
 /**
  * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @type:	the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) works
@@ -161,84 +158,76 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
  * This routine is intended for devices with limited internal buffer
  * It automerges samples of same type, and handles timeouts
  */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-						struct ir_raw_event *ev)
+int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!raw || !ir->props)
+	if (!dev->raw)
 		return -EINVAL;
 
 	/* Ignore spaces in idle mode */
-	if (ir->idle && !ev->pulse)
+	if (dev->idle && !ev->pulse)
 		return 0;
-	else if (ir->idle)
-		ir_raw_event_set_idle(input_dev, false);
-
-	if (!raw->this_ev.duration) {
-		raw->this_ev = *ev;
-	} else if (ev->pulse == raw->this_ev.pulse) {
-		raw->this_ev.duration += ev->duration;
-	} else {
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		raw->this_ev = *ev;
+	else if (dev->idle)
+		ir_raw_event_set_idle(dev, false);
+
+	if (!dev->raw->this_ev.duration)
+		dev->raw->this_ev = *ev;
+	else if (ev->pulse == dev->raw->this_ev.pulse)
+		dev->raw->this_ev.duration += ev->duration;
+	else {
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		dev->raw->this_ev = *ev;
 	}
 
 	/* Enter idle mode if nessesary */
-	if (!ev->pulse && ir->props->timeout &&
-		raw->this_ev.duration >= ir->props->timeout) {
-		ir_raw_event_set_idle(input_dev, true);
-	}
+	if (!ev->pulse && dev->timeout &&
+	    dev->raw->this_ev.duration >= dev->timeout)
+		ir_raw_event_set_idle(dev, true);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
 
 /**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
+ * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not
+ * @dev:	the struct rc_dev device descriptor
+ * @idle:	whether the device is idle or not
  */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!ir->props || !ir->raw)
+	if (!dev->raw)
 		return;
 
 	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
 
 	if (idle) {
-		raw->this_ev.timeout = true;
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		init_ir_raw_event(&raw->this_ev);
+		dev->raw->this_ev.timeout = true;
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		init_ir_raw_event(&dev->raw->this_ev);
 	}
 
-	if (ir->props->s_idle)
-		ir->props->s_idle(ir->props->priv, idle);
-	ir->idle = idle;
+	if (dev->s_idle)
+		dev->s_idle(dev, idle);
+
+	dev->idle = idle;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
 
 /**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  *
- * This routine will signal the workqueue to start decoding stored ir data.
+ * This routine will tell rc-core to start decoding stored ir data.
  */
-void ir_raw_event_handle(struct input_dev *input_dev)
+void ir_raw_event_handle(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	unsigned long flags;
 
-	if (!ir->raw)
+	if (!dev->raw)
 		return;
 
-	spin_lock_irqsave(&ir->raw->lock, flags);
-	wake_up_process(ir->raw->thread);
-	spin_unlock_irqrestore(&ir->raw->lock, flags);
+	spin_lock_irqsave(&dev->raw->lock, flags);
+	wake_up_process(dev->raw->thread);
+	spin_unlock_irqrestore(&dev->raw->lock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
@@ -256,69 +245,69 @@ ir_raw_get_allowed_protocols()
 /*
  * Used to (un)register raw event clients
  */
-int ir_raw_event_register(struct input_dev *input_dev)
+int ir_raw_event_register(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	int rc;
 	struct ir_raw_handler *handler;
 
-	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
-	if (!ir->raw)
-		return -ENOMEM;
+	if (!dev)
+		return -EINVAL;
 
-	ir->raw->input_dev = input_dev;
+	dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
+	if (!dev->raw)
+		return -ENOMEM;
 
-	ir->raw->enabled_protocols = ~0;
-	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+	dev->raw->dev = dev;
+	dev->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&dev->raw->kfifo,
+			 sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
-	if (rc < 0) {
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
-	}
+	if (rc < 0)
+		goto out;
 
-	spin_lock_init(&ir->raw->lock);
-	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
-			"rc%u",  (unsigned int)ir->devno);
+	spin_lock_init(&dev->raw->lock);
+	dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
+				       "rc%ld", dev->devno);
 
-	if (IS_ERR(ir->raw->thread)) {
-		int ret = PTR_ERR(ir->raw->thread);
-
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return ret;
+	if (IS_ERR(dev->raw->thread)) {
+		rc = PTR_ERR(dev->raw->thread);
+		goto out;
 	}
 
 	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir->raw->list, &ir_raw_client_list);
+	list_add_tail(&dev->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_register)
-			handler->raw_register(ir->raw->input_dev);
+			handler->raw_register(dev);
 	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
+
+out:
+	kfree(dev->raw);
+	dev->raw = NULL;
+	return rc;
 }
 
-void ir_raw_event_unregister(struct input_dev *input_dev)
+void ir_raw_event_unregister(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	struct ir_raw_handler *handler;
 
-	if (!ir->raw)
+	if (!dev || !dev->raw)
 		return;
 
-	kthread_stop(ir->raw->thread);
+	kthread_stop(dev->raw->thread);
 
 	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir->raw->list);
+	list_del(&dev->raw->list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
-			handler->raw_unregister(ir->raw->input_dev);
+			handler->raw_unregister(dev);
 	mutex_unlock(&ir_raw_handler_lock);
 
-	kfifo_free(&ir->raw->kfifo);
-	kfree(ir->raw);
-	ir->raw = NULL;
+	kfifo_free(&dev->raw->kfifo);
+	kfree(dev->raw);
+	dev->raw = NULL;
 }
 
 /*
@@ -333,7 +322,7 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
 	if (ir_raw_handler->raw_register)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_register(raw->input_dev);
+			ir_raw_handler->raw_register(raw->dev);
 	available_protocols |= ir_raw_handler->protocols;
 	mutex_unlock(&ir_raw_handler_lock);
 
@@ -349,7 +338,7 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
 	list_del(&ir_raw_handler->list);
 	if (ir_raw_handler->raw_unregister)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_unregister(raw->input_dev);
+			ir_raw_handler->raw_unregister(raw->dev);
 	available_protocols &= ~ir_raw_handler->protocols;
 	mutex_unlock(&ir_raw_handler_lock);
 }
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 3a20aef67d08..f05f5c173fdf 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -34,7 +34,6 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
 #include <media/ir-core.h>
@@ -86,13 +85,11 @@ enum StreamzapDecoderState {
 
 /* structure to hold our device specific stuff */
 struct streamzap_ir {
-
 	/* ir-core */
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 
 	/* core device info */
 	struct device *dev;
-	struct input_dev *idev;
 
 	/* usb */
 	struct usb_device	*usbdev;
@@ -143,7 +140,7 @@ static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
 {
 	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
 		(rawir.pulse ? "pulse" : "space"), rawir.duration);
-	ir_raw_event_store_with_filter(sz->idev, &rawir);
+	ir_raw_event_store_with_filter(sz->rdev, &rawir);
 }
 
 static void sz_push_full_pulse(struct streamzap_ir *sz,
@@ -271,11 +268,11 @@ static void streamzap_callback(struct urb *urb)
 				DEFINE_IR_RAW_EVENT(rawir);
 
 				rawir.pulse = false;
-				rawir.duration = sz->props->timeout;
+				rawir.duration = sz->rdev->timeout;
 				sz->idle = true;
 				if (sz->timeout_enabled)
 					sz_push(sz, rawir);
-				ir_raw_event_handle(sz->idev);
+				ir_raw_event_handle(sz->rdev);
 			} else {
 				sz_push_full_space(sz, sz->buf_in[i]);
 			}
@@ -298,57 +295,43 @@ static void streamzap_callback(struct urb *urb)
 	return;
 }
 
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 {
-	struct input_dev *idev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	struct device *dev = sz->dev;
 	int ret;
 
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
-
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
+	rdev = rc_allocate_device();
+	if (!rdev) {
+		dev_err(dev, "remote dev allocation failed\n");
+		goto out;
 	}
 
 	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
 		 "Receiver (%04x:%04x)",
 		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
 		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
-	idev->name = sz->name;
 	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
 	strlcat(sz->phys, "/input0", sizeof(sz->phys));
-	idev->phys = sz->phys;
-
-	props->priv = sz;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-
-	sz->props = props;
 
-	usb_to_input_id(sz->usbdev, &idev->id);
-	idev->dev.parent = sz->dev;
+	rdev->input_name = sz->name;
+	rdev->input_phys = sz->phys;
+	rdev->priv = sz;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->driver_name = DRIVER_NAME;
+	rdev->map_name = RC_MAP_STREAMZAP;
 
-	ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
+	ret = rc_register_device(rdev);
 	if (ret < 0) {
 		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
+		goto out;
 	}
 
-	return idev;
+	return rdev;
 
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
+out:
+	rc_free_device(rdev);
 	return NULL;
 }
 
@@ -437,15 +420,15 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
 			 " %s", buf);
 
-	sz->idev = streamzap_init_input_dev(sz);
-	if (!sz->idev)
-		goto input_dev_fail;
+	sz->rdev = streamzap_init_rc_dev(sz);
+	if (!sz->rdev)
+		goto rc_dev_fail;
 
 	sz->idle = true;
 	sz->decoder_state = PulseSpace;
 	/* FIXME: don't yet have a way to set this */
 	sz->timeout_enabled = true;
-	sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
+	sz->rdev->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
 				IR_MAX_DURATION) | 0x03000000);
 	#if 0
 	/* not yet supported, depends on patches from maxim */
@@ -476,7 +459,7 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
 
 	return 0;
 
-input_dev_fail:
+rc_dev_fail:
 	usb_free_urb(sz->urb_in);
 free_buf_in:
 	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
@@ -507,7 +490,7 @@ static void streamzap_disconnect(struct usb_interface *interface)
 		return;
 
 	sz->usbdev = NULL;
-	ir_input_unregister(sz->idev);
+	rc_unregister_device(sz->rdev);
 	usb_kill_urb(sz->urb_in);
 	usb_free_urb(sz->urb_in);
 	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index eb71c3ae36de..4b4f6137c6c5 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -31,10 +31,6 @@
 
 static int ir_debug;
 module_param(ir_debug, int, 0644);
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
 
 static int ir_rc5_remote_gap = 885;
 module_param(ir_rc5_remote_gap, int, 0644);
@@ -317,15 +313,15 @@ int bttv_input_init(struct bttv *btv)
 {
 	struct card_ir *ir;
 	char *ir_codes = NULL;
-	struct input_dev *input_dev;
+	struct rc_dev *rc;
 	int err = -ENOMEM;
 
 	if (!btv->has_remote)
 		return -ENODEV;
 
 	ir = kzalloc(sizeof(*ir),GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	rc = rc_allocate_device();
+	if (!ir || !rc)
 		goto err_out_free;
 
 	/* detect & configure */
@@ -431,44 +427,43 @@ int bttv_input_init(struct bttv *btv)
 	}
 
 	/* init input device */
-	ir->dev = input_dev;
+	ir->dev = rc;
 
 	snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
 		 btv->c.type);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(btv->c.pci));
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (btv->c.pci->subsystem_vendor) {
-		input_dev->id.vendor  = btv->c.pci->subsystem_vendor;
-		input_dev->id.product = btv->c.pci->subsystem_device;
+		rc->input_id.vendor  = btv->c.pci->subsystem_vendor;
+		rc->input_id.product = btv->c.pci->subsystem_device;
 	} else {
-		input_dev->id.vendor  = btv->c.pci->vendor;
-		input_dev->id.product = btv->c.pci->device;
+		rc->input_id.vendor  = btv->c.pci->vendor;
+		rc->input_id.product = btv->c.pci->device;
 	}
-	input_dev->dev.parent = &btv->c.pci->dev;
+	rc->dev.parent = &btv->c.pci->dev;
+	rc->map_name = ir_codes;
+	rc->driver_name = MODULE_NAME;
 
 	btv->remote = ir;
 	bttv_ir_start(btv, ir);
 
 	/* all done */
-	err = ir_input_register(btv->remote->dev, ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_stop;
 
-	/* the remote isn't as bouncy as a keyboard */
-	ir->dev->rep[REP_DELAY] = repeat_delay;
-	ir->dev->rep[REP_PERIOD] = repeat_period;
-
 	return 0;
 
  err_out_stop:
 	bttv_ir_stop(btv);
 	btv->remote = NULL;
  err_out_free:
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -479,7 +474,7 @@ void bttv_input_fini(struct bttv *btv)
 		return;
 
 	bttv_ir_stop(btv);
-	ir_input_unregister(btv->remote->dev);
+	rc_unregister_device(btv->remote->dev);
 	kfree(btv->remote);
 	btv->remote = NULL;
 }
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index a09cef43d98d..c439e778c4b1 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -607,7 +607,15 @@ struct cx231xx_ir_t {
 	char name[40];
 	char phys[32];
 
+#if 0	
+	/*
+	 * Due to a Kconfig change, cx231xx-input is not being compiled.
+	 * This structure disappeared, but other fixes are also needed.
+	 * So, as a workaround, let's just comment this struct and let a
+	 * latter patch fix it.
+	 */
 	struct ir_dev_props props;
+#endif
 
 	/* I2C keyboard data */
 	struct IR_i2c_init_data    init_data;
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index bb61870b8d6e..f1bb3a8683c1 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -35,7 +35,6 @@
  *  02110-1301, USA.
  */
 
-#include <linux/input.h>
 #include <linux/slab.h>
 #include <media/ir-core.h>
 #include <media/v4l2-subdev.h>
@@ -62,16 +61,16 @@ static void cx23885_input_process_measurements(struct cx23885_dev *dev,
 		count = num / sizeof(struct ir_raw_event);
 
 		for (i = 0; i < count; i++) {
-			ir_raw_event_store(kernel_ir->inp_dev,
+			ir_raw_event_store(kernel_ir->rc,
 					   &ir_core_event[i]);
 			handle = true;
 		}
 	} while (num != 0);
 
 	if (overrun)
-		ir_raw_event_reset(kernel_ir->inp_dev);
+		ir_raw_event_reset(kernel_ir->rc);
 	else if (handle)
-		ir_raw_event_handle(kernel_ir->inp_dev);
+		ir_raw_event_handle(kernel_ir->rc);
 }
 
 void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
@@ -197,9 +196,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	return 0;
 }
 
-static int cx23885_input_ir_open(void *priv)
+static int cx23885_input_ir_open(struct rc_dev *rc)
 {
-	struct cx23885_kernel_ir *kernel_ir = priv;
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
 
 	if (kernel_ir->cx == NULL)
 		return -ENODEV;
@@ -234,9 +233,9 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 	flush_scheduled_work();
 }
 
-static void cx23885_input_ir_close(void *priv)
+static void cx23885_input_ir_close(struct rc_dev *rc)
 {
-	struct cx23885_kernel_ir *kernel_ir = priv;
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
 
 	if (kernel_ir->cx != NULL)
 		cx23885_input_ir_stop(kernel_ir->cx);
@@ -245,9 +244,7 @@ static void cx23885_input_ir_close(void *priv)
 int cx23885_input_init(struct cx23885_dev *dev)
 {
 	struct cx23885_kernel_ir *kernel_ir;
-	struct input_dev *inp_dev;
-	struct ir_dev_props *props;
-
+	struct rc_dev *rc;
 	char *rc_map;
 	enum rc_driver_type driver_type;
 	unsigned long allowed_protos;
@@ -294,37 +291,36 @@ int cx23885_input_init(struct cx23885_dev *dev)
 				    pci_name(dev->pci));
 
 	/* input device */
-	inp_dev = input_allocate_device();
-	if (inp_dev == NULL) {
+	rc = rc_allocate_device();
+	if (!rc) {
 		ret = -ENOMEM;
 		goto err_out_free;
 	}
 
-	kernel_ir->inp_dev = inp_dev;
-	inp_dev->name = kernel_ir->name;
-	inp_dev->phys = kernel_ir->phys;
-	inp_dev->id.bustype = BUS_PCI;
-	inp_dev->id.version = 1;
+	kernel_ir->rc = rc;
+	rc->input_name = kernel_ir->name;
+	rc->input_phys = kernel_ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (dev->pci->subsystem_vendor) {
-		inp_dev->id.vendor  = dev->pci->subsystem_vendor;
-		inp_dev->id.product = dev->pci->subsystem_device;
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
 	} else {
-		inp_dev->id.vendor  = dev->pci->vendor;
-		inp_dev->id.product = dev->pci->device;
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
 	}
-	inp_dev->dev.parent = &dev->pci->dev;
-
-	/* kernel ir device properties */
-	props = &kernel_ir->props;
-	props->driver_type = driver_type;
-	props->allowed_protos = allowed_protos;
-	props->priv = kernel_ir;
-	props->open = cx23885_input_ir_open;
-	props->close = cx23885_input_ir_close;
+	rc->dev.parent = &dev->pci->dev;
+	rc->driver_type = driver_type;
+	rc->allowed_protos = allowed_protos;
+	rc->priv = kernel_ir;
+	rc->open = cx23885_input_ir_open;
+	rc->close = cx23885_input_ir_close;
+	rc->map_name = rc_map;
+	rc->driver_name = MODULE_NAME;
 
 	/* Go */
 	dev->kernel_ir = kernel_ir;
-	ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME);
+	ret = rc_register_device(rc);
 	if (ret)
 		goto err_out_stop;
 
@@ -333,7 +329,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 err_out_stop:
 	cx23885_input_ir_stop(dev);
 	dev->kernel_ir = NULL;
-	/* TODO: double check clean-up of kernel_ir->inp_dev */
+	rc_free_device(rc);
 err_out_free:
 	kfree(kernel_ir->phys);
 	kfree(kernel_ir->name);
@@ -348,7 +344,7 @@ void cx23885_input_fini(struct cx23885_dev *dev)
 
 	if (dev->kernel_ir == NULL)
 		return;
-	ir_input_unregister(dev->kernel_ir->inp_dev);
+	rc_unregister_device(dev->kernel_ir->rc);
 	kfree(dev->kernel_ir->phys);
 	kfree(dev->kernel_ir->name);
 	kfree(dev->kernel_ir);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index ed94b17dd8a5..f350d88944e8 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -310,8 +310,7 @@ struct cx23885_kernel_ir {
 	char			*name;
 	char			*phys;
 
-	struct input_dev	*inp_dev;
-	struct ir_dev_props	props;
+	struct rc_dev		*rc;
 };
 
 struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 8c41124befbd..3b2ef45d6348 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -24,7 +24,6 @@
 
 #include <linux/init.h>
 #include <linux/hrtimer.h>
-#include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -38,8 +37,7 @@
 
 struct cx88_IR {
 	struct cx88_core *core;
-	struct input_dev *input;
-	struct ir_dev_props props;
+	struct rc_dev *dev;
 
 	int users;
 
@@ -125,26 +123,26 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 
 		data = (data << 4) | ((gpio_key & 0xf0) >> 4);
 
-		ir_keydown(ir->input, data, 0);
+		ir_keydown(ir->dev, data, 0);
 
 	} else if (ir->mask_keydown) {
 		/* bit set on keydown */
 		if (gpio & ir->mask_keydown)
-			ir_keydown_notimeout(ir->input, data, 0);
+			ir_keydown_notimeout(ir->dev, data, 0);
 		else
-			ir_keyup(ir->input);
+			ir_keyup(ir->dev);
 
 	} else if (ir->mask_keyup) {
 		/* bit cleared on keydown */
 		if (0 == (gpio & ir->mask_keyup))
-			ir_keydown_notimeout(ir->input, data, 0);
+			ir_keydown_notimeout(ir->dev, data, 0);
 		else
-			ir_keyup(ir->input);
+			ir_keyup(ir->dev);
 
 	} else {
 		/* can't distinguish keydown/up :-/ */
-		ir_keydown_notimeout(ir->input, data, 0);
-		ir_keyup(ir->input);
+		ir_keydown_notimeout(ir->dev, data, 0);
+		ir_keyup(ir->dev);
 	}
 }
 
@@ -219,17 +217,17 @@ void cx88_ir_stop(struct cx88_core *core)
 		__cx88_ir_stop(core);
 }
 
-static int cx88_ir_open(void *priv)
+static int cx88_ir_open(struct rc_dev *rc)
 {
-	struct cx88_core *core = priv;
+	struct cx88_core *core = rc->priv;
 
 	core->ir->users++;
 	return __cx88_ir_start(core);
 }
 
-static void cx88_ir_close(void *priv)
+static void cx88_ir_close(struct rc_dev *rc)
 {
-	struct cx88_core *core = priv;
+	struct cx88_core *core = rc->priv;
 
 	core->ir->users--;
 	if (!core->ir->users)
@@ -241,7 +239,7 @@ static void cx88_ir_close(void *priv)
 int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 {
 	struct cx88_IR *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *dev;
 	char *ir_codes = NULL;
 	u64 ir_type = IR_TYPE_OTHER;
 	int err = -ENOMEM;
@@ -250,11 +248,11 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 				 */
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	dev = rc_allocate_device();
+	if (!ir || !dev)
 		goto err_out_free;
 
-	ir->input = input_dev;
+	ir->dev = dev;
 
 	/* detect & configure */
 	switch (core->boardnr) {
@@ -435,43 +433,45 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->input_name = ir->name;
+	dev->input_phys = ir->phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
 	if (pci->subsystem_vendor) {
-		input_dev->id.vendor = pci->subsystem_vendor;
-		input_dev->id.product = pci->subsystem_device;
+		dev->input_id.vendor = pci->subsystem_vendor;
+		dev->input_id.product = pci->subsystem_device;
 	} else {
-		input_dev->id.vendor = pci->vendor;
-		input_dev->id.product = pci->device;
+		dev->input_id.vendor = pci->vendor;
+		dev->input_id.product = pci->device;
 	}
-	input_dev->dev.parent = &pci->dev;
-	/* record handles to ourself */
-	ir->core = core;
-	core->ir = ir;
+	dev->dev.parent = &pci->dev;
+	dev->map_name = ir_codes;
+	dev->driver_name = MODULE_NAME;
+	dev->priv = core;
+	dev->open = cx88_ir_open;
+	dev->close = cx88_ir_close;
+	dev->scanmask = hardware_mask;
 
 	if (ir->sampling) {
-		ir_type = IR_TYPE_ALL;
-		ir->props.driver_type = RC_DRIVER_IR_RAW;
-		ir->props.timeout = 10 * 1000 * 1000; /* 10 ms */
-	} else
-		ir->props.driver_type = RC_DRIVER_SCANCODE;
-
-	ir->props.priv = core;
-	ir->props.open = cx88_ir_open;
-	ir->props.close = cx88_ir_close;
-	ir->props.scanmask = hardware_mask;
-	ir->props.allowed_protos = ir_type;
+		dev->driver_type = RC_DRIVER_IR_RAW;
+		dev->timeout = 10 * 1000 * 1000; /* 10 ms */
+	} else {
+		dev->driver_type = RC_DRIVER_SCANCODE;
+		dev->allowed_protos = ir_type;
+	}
+
+	ir->core = core;
+	core->ir = ir;
 
 	/* all done */
-	err = ir_input_register(ir->input, ir_codes, &ir->props, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err)
 		goto err_out_free;
 
 	return 0;
 
- err_out_free:
+err_out_free:
+	rc_free_device(dev);
 	core->ir = NULL;
 	kfree(ir);
 	return err;
@@ -486,7 +486,7 @@ int cx88_ir_fini(struct cx88_core *core)
 		return 0;
 
 	cx88_ir_stop(core);
-	ir_input_unregister(ir->input);
+	rc_unregister_device(ir->dev);
 	kfree(ir);
 
 	/* done */
@@ -502,7 +502,6 @@ void cx88_ir_irq(struct cx88_core *core)
 	u32 samples;
 	unsigned todo, bits;
 	struct ir_raw_event ev;
-	struct ir_input_dev *irdev;
 
 	if (!ir || !ir->sampling)
 		return;
@@ -513,9 +512,8 @@ void cx88_ir_irq(struct cx88_core *core)
 	 * represents a pulse.
 	 */
 	samples = cx_read(MO_SAMPLE_IO);
-       	irdev = input_get_drvdata(ir->input);
 
-	if (samples == 0xff && irdev->idle)
+	if (samples == 0xff && ir->dev->idle)
 		return;
 
 	init_ir_raw_event(&ev);
@@ -523,10 +521,10 @@ void cx88_ir_irq(struct cx88_core *core)
 		ev.pulse = samples & 0x80000000 ? false : true;
 		bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
 		ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
-		ir_raw_event_store_with_filter(ir->input, &ev);
+		ir_raw_event_store_with_filter(ir->dev, &ev);
 		samples <<= bits;
 	}
-	ir_raw_event_handle(ir->input);
+	ir_raw_event_handle(ir->dev);
 }
 
 void cx88_i2c_init_ir(struct cx88_core *core)
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 6759cd5570dd..b7d3999f0417 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/slab.h>
 
@@ -64,7 +63,7 @@ struct em28xx_ir_poll_result {
 
 struct em28xx_IR {
 	struct em28xx *dev;
-	struct input_dev *input;
+	struct rc_dev *rc;
 	char name[32];
 	char phys[32];
 
@@ -75,10 +74,6 @@ struct em28xx_IR {
 	unsigned int last_readcount;
 
 	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
-
-	/* IR device properties */
-
-	struct ir_dev_props props;
 };
 
 /**********************************************************
@@ -302,12 +297,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 			poll_result.toggle_bit, poll_result.read_count,
 			poll_result.rc_address, poll_result.rc_data[0]);
 		if (ir->full_code)
-			ir_keydown(ir->input,
+			ir_keydown(ir->rc,
 				   poll_result.rc_address << 8 |
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 		else
-			ir_keydown(ir->input,
+			ir_keydown(ir->rc,
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 
@@ -331,9 +326,9 @@ static void em28xx_ir_work(struct work_struct *work)
 	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
-static int em28xx_ir_start(void *priv)
+static int em28xx_ir_start(struct rc_dev *rc)
 {
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc->priv;
 
 	INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
 	schedule_delayed_work(&ir->work, 0);
@@ -341,17 +336,17 @@ static int em28xx_ir_start(void *priv)
 	return 0;
 }
 
-static void em28xx_ir_stop(void *priv)
+static void em28xx_ir_stop(struct rc_dev *rc)
 {
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc->priv;
 
 	cancel_delayed_work_sync(&ir->work);
 }
 
-int em28xx_ir_change_protocol(void *priv, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 ir_type)
 {
 	int rc = 0;
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc_dev->priv;
 	struct em28xx *dev = ir->dev;
 	u8 ir_config = EM2874_IR_RC5;
 
@@ -391,7 +386,7 @@ int em28xx_ir_change_protocol(void *priv, u64 ir_type)
 int em28xx_ir_init(struct em28xx *dev)
 {
 	struct em28xx_IR *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *rc;
 	int err = -ENOMEM;
 
 	if (dev->board.ir_codes == NULL) {
@@ -400,28 +395,27 @@ int em28xx_ir_init(struct em28xx *dev)
 	}
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	rc = rc_allocate_device();
+	if (!ir || !rc)
 		goto err_out_free;
 
 	/* record handles to ourself */
 	ir->dev = dev;
 	dev->ir = ir;
-
-	ir->input = input_dev;
+	ir->rc = rc;
 
 	/*
 	 * em2874 supports more protocols. For now, let's just announce
 	 * the two protocols that were already tested
 	 */
-	ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-	ir->props.priv = ir;
-	ir->props.change_protocol = em28xx_ir_change_protocol;
-	ir->props.open = em28xx_ir_start;
-	ir->props.close = em28xx_ir_stop;
+	rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+	rc->priv = ir;
+	rc->change_protocol = em28xx_ir_change_protocol;
+	rc->open = em28xx_ir_start;
+	rc->close = em28xx_ir_stop;
 
 	/* By default, keep protocol field untouched */
-	err = em28xx_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
+	err = em28xx_ir_change_protocol(rc, IR_TYPE_UNKNOWN);
 	if (err)
 		goto err_out_free;
 
@@ -435,27 +429,27 @@ int em28xx_ir_init(struct em28xx *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.version = 1;
-	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
-
-	input_dev->dev.parent = &dev->udev->dev;
-
-
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_USB;
+	rc->input_id.version = 1;
+	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	rc->dev.parent = &dev->udev->dev;
+	rc->map_name = dev->board.ir_codes;
+	rc->driver_name = MODULE_NAME;
 
 	/* all done */
-	err = ir_input_register(ir->input, dev->board.ir_codes,
-				&ir->props, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_stop;
 
 	return 0;
+
  err_out_stop:
 	dev->ir = NULL;
  err_out_free:
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -468,8 +462,8 @@ int em28xx_ir_fini(struct em28xx *dev)
 	if (!ir)
 		return 0;
 
-	em28xx_ir_stop(ir);
-	ir_input_unregister(ir->input);
+	em28xx_ir_stop(ir->rc);
+	rc_unregister_device(ir->rc);
 	kfree(ir);
 
 	/* done */
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index a78883a6e0e7..83b59a195230 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -252,7 +252,7 @@ static void ir_key_poll(struct IR_i2c *ir)
 	}
 
 	if (rc)
-		ir_keydown(ir->input, ir_key, 0);
+		ir_keydown(ir->rc, ir_key, 0);
 }
 
 static void ir_work(struct work_struct *work)
@@ -271,20 +271,20 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	const char *name = NULL;
 	u64 ir_type = IR_TYPE_UNKNOWN;
 	struct IR_i2c *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *rc;
 	struct i2c_adapter *adap = client->adapter;
 	unsigned short addr = client->addr;
 	int err;
 
 	ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev) {
+	rc = rc_allocate_device();
+	if (!ir || !rc) {
 		err = -ENOMEM;
 		goto err_out_free;
 	}
 
 	ir->c = client;
-	ir->input = input_dev;
+	ir->rc = rc;
 	ir->polling_interval = DEFAULT_POLLING_INTERVAL;
 	i2c_set_clientdata(client, ir);
 
@@ -383,16 +383,18 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 dev_name(&client->dev));
 
 	/* init + register input device */
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->name       = ir->name;
-	input_dev->phys       = ir->phys;
+	rc->input_id.bustype = BUS_I2C;
+	rc->input_name       = ir->name;
+	rc->input_phys       = ir->phys;
+	rc->map_name         = ir->ir_codes;
+	rc->driver_name      = MODULE_NAME;
 
-	err = ir_input_register(ir->input, ir->ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_free;
 
 	printk(MODULE_NAME ": %s detected at %s [%s]\n",
-	       ir->input->name, ir->input->phys, adap->name);
+	       ir->name, ir->phys, adap->name);
 
 	/* start polling via eventd */
 	INIT_DELAYED_WORK(&ir->work, ir_work);
@@ -401,6 +403,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return 0;
 
  err_out_free:
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -413,7 +416,7 @@ static int ir_remove(struct i2c_client *client)
 	cancel_delayed_work_sync(&ir->work);
 
 	/* unregister device */
-	ir_input_unregister(ir->input);
+	rc_unregister_device(ir->rc);
 
 	/* free memory */
 	kfree(ir);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 3e37593a328f..fbb2ff171008 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/slab.h>
 
 #include "saa7134-reg.h"
@@ -45,14 +44,6 @@ MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=g
 static int ir_rc5_remote_gap = 885;
 module_param(ir_rc5_remote_gap, int, 0644);
 
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "delay before key repeat started");
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
-MODULE_PARM_DESC(repeat_period, "repeat period between "
-    "keypresses when key is down");
-
 static unsigned int disable_other_ir;
 module_param(disable_other_ir, int, 0644);
 MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
@@ -523,17 +514,17 @@ void saa7134_ir_stop(struct saa7134_dev *dev)
 		__saa7134_ir_stop(dev);
 }
 
-static int saa7134_ir_open(void *priv)
+static int saa7134_ir_open(struct rc_dev *rc)
 {
-	struct saa7134_dev *dev = priv;
+	struct saa7134_dev *dev = rc->priv;
 
 	dev->remote->users++;
 	return __saa7134_ir_start(dev);
 }
 
-static void saa7134_ir_close(void *priv)
+static void saa7134_ir_close(struct rc_dev *rc)
 {
-	struct saa7134_dev *dev = priv;
+	struct saa7134_dev *dev = rc->priv;
 
 	dev->remote->users--;
 	if (!dev->remote->users)
@@ -541,9 +532,9 @@ static void saa7134_ir_close(void *priv)
 }
 
 
-static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
+static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 {
-	struct saa7134_dev *dev = priv;
+	struct saa7134_dev *dev = rc->priv;
 	struct card_ir *ir = dev->remote;
 	u32 nec_gpio, rc5_gpio;
 
@@ -577,7 +568,7 @@ static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
 	struct card_ir *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *rc;
 	char *ir_codes = NULL;
 	u32 mask_keycode = 0;
 	u32 mask_keydown = 0;
@@ -822,13 +813,13 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	}
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev) {
+	rc = rc_allocate_device();
+	if (!ir || !rc) {
 		err = -ENOMEM;
 		goto err_out_free;
 	}
 
-	ir->dev = input_dev;
+	ir->dev = rc;
 	dev->remote = ir;
 
 	ir->running = 0;
@@ -848,43 +839,40 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(dev->pci));
 
-
-	ir->props.priv = dev;
-	ir->props.open = saa7134_ir_open;
-	ir->props.close = saa7134_ir_close;
-
+	rc->priv = dev;
+	rc->open = saa7134_ir_open;
+	rc->close = saa7134_ir_close;
 	if (raw_decode)
-		ir->props.driver_type = RC_DRIVER_IR_RAW;
+		rc->driver_type = RC_DRIVER_IR_RAW;
 
 	if (!raw_decode && allow_protocol_change) {
-		ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-		ir->props.change_protocol = saa7134_ir_change_protocol;
+		rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+		rc->change_protocol = saa7134_ir_change_protocol;
 	}
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (dev->pci->subsystem_vendor) {
-		input_dev->id.vendor  = dev->pci->subsystem_vendor;
-		input_dev->id.product = dev->pci->subsystem_device;
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
 	} else {
-		input_dev->id.vendor  = dev->pci->vendor;
-		input_dev->id.product = dev->pci->device;
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
 	}
-	input_dev->dev.parent = &dev->pci->dev;
+	rc->dev.parent = &dev->pci->dev;
+	rc->map_name = ir_codes;
+	rc->driver_name = MODULE_NAME;
 
-	err = ir_input_register(ir->dev, ir_codes, &ir->props, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_free;
 
-	/* the remote isn't as bouncy as a keyboard */
-	ir->dev->rep[REP_DELAY] = repeat_delay;
-	ir->dev->rep[REP_PERIOD] = repeat_period;
-
 	return 0;
 
 err_out_free:
+	rc_free_device(rc);
 	dev->remote = NULL;
 	kfree(ir);
 	return err;
@@ -896,7 +884,7 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 		return;
 
 	saa7134_ir_stop(dev);
-	ir_input_unregister(dev->remote->dev);
+	rc_unregister_device(dev->remote->dev);
 	kfree(dev->remote);
 	dev->remote = NULL;
 }
-- 
cgit v1.2.3


From 5b2e303f6df1e0b1a903950c5d613a20c8c71a37 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=A4rdeman?= <david@hardeman.nu>
Date: Fri, 29 Oct 2010 16:08:28 -0300
Subject: [media] rc-core: convert winbond-cir
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Move winbond-cir from drivers/input/misc/ into drivers/media/rc/
and convert it to use rc-core.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Kconfig       |  17 +
 drivers/media/rc/Makefile      |   1 +
 drivers/media/rc/winbond-cir.c | 932 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 950 insertions(+)
 create mode 100644 drivers/media/rc/winbond-cir.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index d05003d0995f..2d1546889c9b 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -164,4 +164,21 @@ config IR_STREAMZAP
 	   To compile this driver as a module, choose M here: the
 	   module will be called streamzap.
 
+config IR_WINBOND_CIR
+        tristate "Winbond IR remote control"
+        depends on X86 && PNP
+	depends on IR_CORE
+        select NEW_LEDS
+        select LEDS_CLASS
+        select LEDS_TRIGGERS
+        select BITREVERSE
+	---help---
+           Say Y here if you want to use the IR remote functionality found
+           in some Winbond SuperI/O chips. Currently only the WPCD376I
+           chip is supported (included in some Intel Media series
+	   motherboards).
+
+           To compile this driver as a module, choose M here: the module will
+	   be called winbond_cir.
+
 endif #IR_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 1eb24e6bc55c..859c12cc03ff 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_IR_MCEUSB) += mceusb.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
+obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
new file mode 100644
index 000000000000..0ee16ec23bbf
--- /dev/null
+++ b/drivers/media/rc/winbond-cir.c
@@ -0,0 +1,932 @@
+/*
+ *  winbond-cir.c - Driver for the Consumer IR functionality of Winbond
+ *                  SuperI/O chips.
+ *
+ *  Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
+ *  could probably support others (Winbond WEC102X, NatSemi, etc)
+ *  with minor modifications.
+ *
+ *  Original Author: David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
+ *
+ *  Dedicated to my daughter Matilda, without whose loving attention this
+ *  driver would have been finished in half the time and with a fraction
+ *  of the bugs.
+ *
+ *  Written using:
+ *    o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
+ *    o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
+ *    o DSDT dumps
+ *
+ *  Supported features:
+ *    o Wake-On-CIR functionality
+ *
+ *  To do:
+ *    o Learning
+ *    o IR Transmit
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include <linux/spinlock.h>
+#include <linux/pci_ids.h>
+#include <linux/io.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+#include <media/ir-core.h>
+
+#define DRVNAME "winbond-cir"
+
+/* CEIR Wake-Up Registers, relative to data->wbase                      */
+#define WBCIR_REG_WCEIR_CTL	0x03 /* CEIR Receiver Control		*/
+#define WBCIR_REG_WCEIR_STS	0x04 /* CEIR Receiver Status		*/
+#define WBCIR_REG_WCEIR_EV_EN	0x05 /* CEIR Receiver Event Enable	*/
+#define WBCIR_REG_WCEIR_CNTL	0x06 /* CEIR Receiver Counter Low	*/
+#define WBCIR_REG_WCEIR_CNTH	0x07 /* CEIR Receiver Counter High	*/
+#define WBCIR_REG_WCEIR_INDEX	0x08 /* CEIR Receiver Index		*/
+#define WBCIR_REG_WCEIR_DATA	0x09 /* CEIR Receiver Data		*/
+#define WBCIR_REG_WCEIR_CSL	0x0A /* CEIR Re. Compare Strlen		*/
+#define WBCIR_REG_WCEIR_CFG1	0x0B /* CEIR Re. Configuration 1	*/
+#define WBCIR_REG_WCEIR_CFG2	0x0C /* CEIR Re. Configuration 2	*/
+
+/* CEIR Enhanced Functionality Registers, relative to data->ebase       */
+#define WBCIR_REG_ECEIR_CTS	0x00 /* Enhanced IR Control Status	*/
+#define WBCIR_REG_ECEIR_CCTL	0x01 /* Infrared Counter Control	*/
+#define WBCIR_REG_ECEIR_CNT_LO	0x02 /* Infrared Counter LSB		*/
+#define WBCIR_REG_ECEIR_CNT_HI	0x03 /* Infrared Counter MSB		*/
+#define WBCIR_REG_ECEIR_IREM	0x04 /* Infrared Emitter Status		*/
+
+/* SP3 Banked Registers, relative to data->sbase                        */
+#define WBCIR_REG_SP3_BSR	0x03 /* Bank Select, all banks		*/
+				      /* Bank 0				*/
+#define WBCIR_REG_SP3_RXDATA	0x00 /* FIFO RX data (r)		*/
+#define WBCIR_REG_SP3_TXDATA	0x00 /* FIFO TX data (w)		*/
+#define WBCIR_REG_SP3_IER	0x01 /* Interrupt Enable		*/
+#define WBCIR_REG_SP3_EIR	0x02 /* Event Identification (r)	*/
+#define WBCIR_REG_SP3_FCR	0x02 /* FIFO Control (w)		*/
+#define WBCIR_REG_SP3_MCR	0x04 /* Mode Control			*/
+#define WBCIR_REG_SP3_LSR	0x05 /* Link Status			*/
+#define WBCIR_REG_SP3_MSR	0x06 /* Modem Status			*/
+#define WBCIR_REG_SP3_ASCR	0x07 /* Aux Status and Control		*/
+				      /* Bank 2				*/
+#define WBCIR_REG_SP3_BGDL	0x00 /* Baud Divisor LSB		*/
+#define WBCIR_REG_SP3_BGDH	0x01 /* Baud Divisor MSB		*/
+#define WBCIR_REG_SP3_EXCR1	0x02 /* Extended Control 1		*/
+#define WBCIR_REG_SP3_EXCR2	0x04 /* Extended Control 2		*/
+#define WBCIR_REG_SP3_TXFLV	0x06 /* TX FIFO Level			*/
+#define WBCIR_REG_SP3_RXFLV	0x07 /* RX FIFO Level			*/
+				      /* Bank 3				*/
+#define WBCIR_REG_SP3_MRID	0x00 /* Module Identification		*/
+#define WBCIR_REG_SP3_SH_LCR	0x01 /* LCR Shadow			*/
+#define WBCIR_REG_SP3_SH_FCR	0x02 /* FCR Shadow			*/
+				      /* Bank 4				*/
+#define WBCIR_REG_SP3_IRCR1	0x02 /* Infrared Control 1		*/
+				      /* Bank 5				*/
+#define WBCIR_REG_SP3_IRCR2	0x04 /* Infrared Control 2		*/
+				      /* Bank 6				*/
+#define WBCIR_REG_SP3_IRCR3	0x00 /* Infrared Control 3		*/
+#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width			*/
+				      /* Bank 7				*/
+#define WBCIR_REG_SP3_IRRXDC	0x00 /* IR RX Demod Control		*/
+#define WBCIR_REG_SP3_IRTXMC	0x01 /* IR TX Mod Control		*/
+#define WBCIR_REG_SP3_RCCFG	0x02 /* CEIR Config			*/
+#define WBCIR_REG_SP3_IRCFG1	0x04 /* Infrared Config 1		*/
+#define WBCIR_REG_SP3_IRCFG4	0x07 /* Infrared Config 4		*/
+
+/*
+ * Magic values follow
+ */
+
+/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_NONE		0x00
+/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_RX		0x01
+/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
+#define WBCIR_IRQ_ERR		0x04
+/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
+#define WBCIR_LED_ENABLE	0x80
+/* RX data available bit for WBCIR_REG_SP3_LSR */
+#define WBCIR_RX_AVAIL		0x01
+/* RX disable bit for WBCIR_REG_SP3_ASCR */
+#define WBCIR_RX_DISABLE	0x20
+/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
+#define WBCIR_EXT_ENABLE	0x01
+/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_COMPARE	0x10
+/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
+#define WBCIR_REGSEL_MASK	0x20
+/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
+#define WBCIR_REG_ADDR0		0x00
+
+/* Valid banks for the SP3 UART */
+enum wbcir_bank {
+	WBCIR_BANK_0          = 0x00,
+	WBCIR_BANK_1          = 0x80,
+	WBCIR_BANK_2          = 0xE0,
+	WBCIR_BANK_3          = 0xE4,
+	WBCIR_BANK_4          = 0xE8,
+	WBCIR_BANK_5          = 0xEC,
+	WBCIR_BANK_6          = 0xF0,
+	WBCIR_BANK_7          = 0xF4,
+};
+
+/* Supported power-on IR Protocols */
+enum wbcir_protocol {
+	IR_PROTOCOL_RC5          = 0x0,
+	IR_PROTOCOL_NEC          = 0x1,
+	IR_PROTOCOL_RC6          = 0x2,
+};
+
+/* Misc */
+#define WBCIR_NAME	"Winbond CIR"
+#define WBCIR_ID_FAMILY          0xF1 /* Family ID for the WPCD376I	*/
+#define	WBCIR_ID_CHIP            0x04 /* Chip ID for the WPCD376I	*/
+#define INVALID_SCANCODE   0x7FFFFFFF /* Invalid with all protos	*/
+#define WAKEUP_IOMEM_LEN         0x10 /* Wake-Up I/O Reg Len		*/
+#define EHFUNC_IOMEM_LEN         0x10 /* Enhanced Func I/O Reg Len	*/
+#define SP_IOMEM_LEN             0x08 /* Serial Port 3 (IR) Reg Len	*/
+
+/* Per-device data */
+struct wbcir_data {
+	spinlock_t spinlock;
+
+	unsigned long wbase;        /* Wake-Up Baseaddr		*/
+	unsigned long ebase;        /* Enhanced Func. Baseaddr	*/
+	unsigned long sbase;        /* Serial Port Baseaddr	*/
+	unsigned int  irq;          /* Serial Port IRQ		*/
+
+	struct rc_dev *dev;
+
+	struct led_trigger *rxtrigger;
+	struct led_trigger *txtrigger;
+	struct led_classdev led;
+
+	/* RX irdata state */
+	bool irdata_active;
+	bool irdata_error;
+	struct ir_raw_event ev;
+};
+
+static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
+module_param(protocol, uint, 0444);
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
+		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
+
+static int invert; /* default = 0 */
+module_param(invert, bool, 0444);
+MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
+
+static unsigned int wake_sc = 0x800F040C;
+module_param(wake_sc, uint, 0644);
+MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
+
+static unsigned int wake_rc6mode = 6;
+module_param(wake_rc6mode, uint, 0644);
+MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
+		 "(0 = 0, 6 = 6A, default)");
+
+
+
+/*****************************************************************************
+ *
+ * UTILITY FUNCTIONS
+ *
+ *****************************************************************************/
+
+/* Caller needs to hold wbcir_lock */
+static void
+wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
+{
+	u8 val;
+
+	val = inb(addr);
+	val = ((val & ~mask) | (bits & mask));
+	outb(val, addr);
+}
+
+/* Selects the register bank for the serial port */
+static inline void
+wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
+{
+	outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
+}
+
+static enum led_brightness
+wbcir_led_brightness_get(struct led_classdev *led_cdev)
+{
+	struct wbcir_data *data = container_of(led_cdev,
+					       struct wbcir_data,
+					       led);
+
+	if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
+		return LED_FULL;
+	else
+		return LED_OFF;
+}
+
+static void
+wbcir_led_brightness_set(struct led_classdev *led_cdev,
+			 enum led_brightness brightness)
+{
+	struct wbcir_data *data = container_of(led_cdev,
+					       struct wbcir_data,
+					       led);
+
+	wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
+		       brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
+		       WBCIR_LED_ENABLE);
+}
+
+/* Manchester encodes bits to RC6 message cells (see wbcir_shutdown) */
+static u8
+wbcir_to_rc6cells(u8 val)
+{
+	u8 coded = 0x00;
+	int i;
+
+	val &= 0x0F;
+	for (i = 0; i < 4; i++) {
+		if (val & 0x01)
+			coded |= 0x02 << (i * 2);
+		else
+			coded |= 0x01 << (i * 2);
+		val >>= 1;
+	}
+
+	return coded;
+}
+
+/*****************************************************************************
+ *
+ * INTERRUPT FUNCTIONS
+ *
+ *****************************************************************************/
+
+static irqreturn_t
+wbcir_irq_handler(int irqno, void *cookie)
+{
+	struct pnp_dev *device = cookie;
+	struct wbcir_data *data = pnp_get_drvdata(device);
+	unsigned long flags;
+	u8 irdata[8];
+	u8 disable = true;
+	u8 status;
+	int i;
+
+	spin_lock_irqsave(&data->spinlock, flags);
+
+	wbcir_select_bank(data, WBCIR_BANK_0);
+
+	status = inb(data->sbase + WBCIR_REG_SP3_EIR);
+
+	if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
+		spin_unlock_irqrestore(&data->spinlock, flags);
+		return IRQ_NONE;
+	}
+
+	/* Check for e.g. buffer overflow */
+	if (status & WBCIR_IRQ_ERR) {
+		data->irdata_error = true;
+		ir_raw_event_reset(data->dev);
+	}
+
+	if (!(status & WBCIR_IRQ_RX))
+		goto out;
+
+	if (!data->irdata_active) {
+		data->irdata_active = true;
+		led_trigger_event(data->rxtrigger, LED_FULL);
+	}
+
+	/* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
+	insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
+
+	for (i = 0; i < 8; i++) {
+		u8 pulse;
+		u32 duration;
+
+		if (irdata[i] != 0xFF && irdata[i] != 0x00)
+			disable = false;
+
+		if (data->irdata_error)
+			continue;
+
+		pulse = irdata[i] & 0x80 ? false : true;
+		duration = (irdata[i] & 0x7F) * 10000; /* ns */
+
+		if (data->ev.pulse != pulse) {
+			if (data->ev.duration != 0) {
+				ir_raw_event_store(data->dev, &data->ev);
+				data->ev.duration = 0;
+			}
+
+			data->ev.pulse = pulse;
+		}
+
+		data->ev.duration += duration;
+	}
+
+	if (disable) {
+		if (data->ev.duration != 0 && !data->irdata_error) {
+			ir_raw_event_store(data->dev, &data->ev);
+			data->ev.duration = 0;
+		}
+
+		/* Set RXINACTIVE */
+		outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
+
+		/* Drain the FIFO */
+		while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
+			inb(data->sbase + WBCIR_REG_SP3_RXDATA);
+
+		ir_raw_event_reset(data->dev);
+		data->irdata_error = false;
+		data->irdata_active = false;
+		led_trigger_event(data->rxtrigger, LED_OFF);
+	}
+
+	ir_raw_event_handle(data->dev);
+
+out:
+	spin_unlock_irqrestore(&data->spinlock, flags);
+	return IRQ_HANDLED;
+}
+
+
+
+/*****************************************************************************
+ *
+ * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
+ *
+ *****************************************************************************/
+
+static void
+wbcir_shutdown(struct pnp_dev *device)
+{
+	struct device *dev = &device->dev;
+	struct wbcir_data *data = pnp_get_drvdata(device);
+	int do_wake = 1;
+	u8 match[11];
+	u8 mask[11];
+	u8 rc6_csl = 0;
+	int i;
+
+	memset(match, 0, sizeof(match));
+	memset(mask, 0, sizeof(mask));
+
+	if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
+		do_wake = 0;
+		goto finish;
+	}
+
+	switch (protocol) {
+	case IR_PROTOCOL_RC5:
+		if (wake_sc > 0xFFF) {
+			do_wake = 0;
+			dev_err(dev, "RC5 - Invalid wake scancode\n");
+			break;
+		}
+
+		/* Mask = 13 bits, ex toggle */
+		mask[0] = 0xFF;
+		mask[1] = 0x17;
+
+		match[0]  = (wake_sc & 0x003F);      /* 6 command bits */
+		match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
+		match[1]  = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
+		if (!(wake_sc & 0x0040))             /* 2nd start bit  */
+			match[1] |= 0x10;
+
+		break;
+
+	case IR_PROTOCOL_NEC:
+		if (wake_sc > 0xFFFFFF) {
+			do_wake = 0;
+			dev_err(dev, "NEC - Invalid wake scancode\n");
+			break;
+		}
+
+		mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
+
+		match[1] = bitrev8((wake_sc & 0xFF));
+		match[0] = ~match[1];
+
+		match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
+		if (wake_sc > 0xFFFF)
+			match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
+		else
+			match[2] = ~match[3];
+
+		break;
+
+	case IR_PROTOCOL_RC6:
+
+		if (wake_rc6mode == 0) {
+			if (wake_sc > 0xFFFF) {
+				do_wake = 0;
+				dev_err(dev, "RC6 - Invalid wake scancode\n");
+				break;
+			}
+
+			/* Command */
+			match[0] = wbcir_to_rc6cells(wake_sc >>  0);
+			mask[0]  = 0xFF;
+			match[1] = wbcir_to_rc6cells(wake_sc >>  4);
+			mask[1]  = 0xFF;
+
+			/* Address */
+			match[2] = wbcir_to_rc6cells(wake_sc >>  8);
+			mask[2]  = 0xFF;
+			match[3] = wbcir_to_rc6cells(wake_sc >> 12);
+			mask[3]  = 0xFF;
+
+			/* Header */
+			match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
+			mask[4]  = 0xF0;
+			match[5] = 0x09; /* start bit = 1, mode2 = 0 */
+			mask[5]  = 0x0F;
+
+			rc6_csl = 44;
+
+		} else if (wake_rc6mode == 6) {
+			i = 0;
+
+			/* Command */
+			match[i]  = wbcir_to_rc6cells(wake_sc >>  0);
+			mask[i++] = 0xFF;
+			match[i]  = wbcir_to_rc6cells(wake_sc >>  4);
+			mask[i++] = 0xFF;
+
+			/* Address + Toggle */
+			match[i]  = wbcir_to_rc6cells(wake_sc >>  8);
+			mask[i++] = 0xFF;
+			match[i]  = wbcir_to_rc6cells(wake_sc >> 12);
+			mask[i++] = 0x3F;
+
+			/* Customer bits 7 - 0 */
+			match[i]  = wbcir_to_rc6cells(wake_sc >> 16);
+			mask[i++] = 0xFF;
+			match[i]  = wbcir_to_rc6cells(wake_sc >> 20);
+			mask[i++] = 0xFF;
+
+			if (wake_sc & 0x80000000) {
+				/* Customer range bit and bits 15 - 8 */
+				match[i]  = wbcir_to_rc6cells(wake_sc >> 24);
+				mask[i++] = 0xFF;
+				match[i]  = wbcir_to_rc6cells(wake_sc >> 28);
+				mask[i++] = 0xFF;
+				rc6_csl = 76;
+			} else if (wake_sc <= 0x007FFFFF) {
+				rc6_csl = 60;
+			} else {
+				do_wake = 0;
+				dev_err(dev, "RC6 - Invalid wake scancode\n");
+				break;
+			}
+
+			/* Header */
+			match[i]  = 0x93; /* mode1 = mode0 = 1, submode = 0 */
+			mask[i++] = 0xFF;
+			match[i]  = 0x0A; /* start bit = 1, mode2 = 1 */
+			mask[i++] = 0x0F;
+
+		} else {
+			do_wake = 0;
+			dev_err(dev, "RC6 - Invalid wake mode\n");
+		}
+
+		break;
+
+	default:
+		do_wake = 0;
+		break;
+	}
+
+finish:
+	if (do_wake) {
+		/* Set compare and compare mask */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+			       WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
+			       0x3F);
+		outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
+			       WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
+			       0x3F);
+		outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
+
+		/* RC6 Compare String Len */
+		outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
+
+		/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+		/* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
+
+		/* Set CEIR_EN */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
+
+	} else {
+		/* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+		/* Clear CEIR_EN */
+		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+	}
+
+	/* Disable interrupts */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+	/* Disable LED */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+
+	/*
+	 * ACPI will set the HW disable bit for SP3 which means that the
+	 * output signals are left in an undefined state which may cause
+	 * spurious interrupts which we need to ignore until the hardware
+	 * is reinitialized.
+	 */
+	disable_irq(data->irq);
+}
+
+static int
+wbcir_suspend(struct pnp_dev *device, pm_message_t state)
+{
+	wbcir_shutdown(device);
+	return 0;
+}
+
+static void
+wbcir_init_hw(struct wbcir_data *data)
+{
+	u8 tmp;
+
+	/* Disable interrupts */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+	/* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
+	tmp = protocol << 4;
+	if (invert)
+		tmp |= 0x08;
+	outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
+
+	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+	/* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+	/* Set RC5 cell time to correspond to 36 kHz */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
+
+	/* Set IRTX_INV */
+	if (invert)
+		outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
+	else
+		outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
+
+	/*
+	 * Clear IR LED, set SP3 clock to 24Mhz
+	 * set SP3_IRRX_SW to binary 01, helpfully not documented
+	 */
+	outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
+
+	/* Enable extended mode */
+	wbcir_select_bank(data, WBCIR_BANK_2);
+	outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
+
+	/*
+	 * Configure baud generator, IR data will be sampled at
+	 * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
+	 *
+	 * The ECIR registers include a flag to change the
+	 * 24Mhz clock freq to 48Mhz.
+	 *
+	 * It's not documented in the specs, but fifo levels
+	 * other than 16 seems to be unsupported.
+	 */
+
+	/* prescaler 1.0, tx/rx fifo lvl 16 */
+	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
+
+	/* Set baud divisor to generate one byte per bit/cell */
+	switch (protocol) {
+	case IR_PROTOCOL_RC5:
+		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	case IR_PROTOCOL_RC6:
+		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	case IR_PROTOCOL_NEC:
+		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	}
+	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+	/* Set CEIR mode */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
+	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
+	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
+
+	/* Disable RX demod, run-length encoding/decoding, set freq span */
+	wbcir_select_bank(data, WBCIR_BANK_7);
+	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+
+	/* Disable timer */
+	wbcir_select_bank(data, WBCIR_BANK_4);
+	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
+
+	/* Enable MSR interrupt, Clear AUX_IRX */
+	wbcir_select_bank(data, WBCIR_BANK_5);
+	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
+
+	/* Disable CRC */
+	wbcir_select_bank(data, WBCIR_BANK_6);
+	outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
+
+	/* Set RX/TX (de)modulation freq, not really used */
+	wbcir_select_bank(data, WBCIR_BANK_7);
+	outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
+	outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
+
+	/* Set invert and pin direction */
+	if (invert)
+		outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
+	else
+		outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
+
+	/* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
+
+	/* Clear AUX status bits */
+	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
+
+	/* Clear IR decoding state */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+	data->irdata_error = false;
+	data->ev.duration = 0;
+	ir_raw_event_reset(data->dev);
+	ir_raw_event_handle(data->dev);
+
+	/* Enable interrupts */
+	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+}
+
+static int
+wbcir_resume(struct pnp_dev *device)
+{
+	struct wbcir_data *data = pnp_get_drvdata(device);
+
+	wbcir_init_hw(data);
+	enable_irq(data->irq);
+
+	return 0;
+}
+
+static int __devinit
+wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
+{
+	struct device *dev = &device->dev;
+	struct wbcir_data *data;
+	int err;
+
+	if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
+	      pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
+	      pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
+		dev_err(dev, "Invalid resources\n");
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	pnp_set_drvdata(device, data);
+
+	spin_lock_init(&data->spinlock);
+	data->ebase = pnp_port_start(device, 0);
+	data->wbase = pnp_port_start(device, 1);
+	data->sbase = pnp_port_start(device, 2);
+	data->irq = pnp_irq(device, 0);
+
+	if (data->wbase == 0 || data->ebase == 0 ||
+	    data->sbase == 0 || data->irq == 0) {
+		err = -ENODEV;
+		dev_err(dev, "Invalid resources\n");
+		goto exit_free_data;
+	}
+
+	dev_dbg(&device->dev, "Found device "
+		"(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
+		data->wbase, data->ebase, data->sbase, data->irq);
+
+	if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
+		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+			data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
+		err = -EBUSY;
+		goto exit_free_data;
+	}
+
+	if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
+		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+			data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
+		err = -EBUSY;
+		goto exit_release_wbase;
+	}
+
+	if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
+		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+			data->sbase, data->sbase + SP_IOMEM_LEN - 1);
+		err = -EBUSY;
+		goto exit_release_ebase;
+	}
+
+	err = request_irq(data->irq, wbcir_irq_handler,
+			  IRQF_DISABLED, DRVNAME, device);
+	if (err) {
+		dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
+		err = -EBUSY;
+		goto exit_release_sbase;
+	}
+
+	led_trigger_register_simple("cir-tx", &data->txtrigger);
+	if (!data->txtrigger) {
+		err = -ENOMEM;
+		goto exit_free_irq;
+	}
+
+	led_trigger_register_simple("cir-rx", &data->rxtrigger);
+	if (!data->rxtrigger) {
+		err = -ENOMEM;
+		goto exit_unregister_txtrigger;
+	}
+
+	data->led.name = "cir::activity";
+	data->led.default_trigger = "cir-rx";
+	data->led.brightness_set = wbcir_led_brightness_set;
+	data->led.brightness_get = wbcir_led_brightness_get;
+	err = led_classdev_register(&device->dev, &data->led);
+	if (err)
+		goto exit_unregister_rxtrigger;
+
+	data->dev = rc_allocate_device();
+	if (!data->dev) {
+		err = -ENOMEM;
+		goto exit_unregister_led;
+	}
+
+	data->dev->driver_name = WBCIR_NAME;
+	data->dev->input_name = WBCIR_NAME;
+	data->dev->input_phys = "wbcir/cir0";
+	data->dev->input_id.bustype = BUS_HOST;
+	data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
+	data->dev->input_id.product = WBCIR_ID_FAMILY;
+	data->dev->input_id.version = WBCIR_ID_CHIP;
+	data->dev->priv = data;
+	data->dev->dev.parent = &device->dev;
+
+	err = rc_register_device(data->dev);
+	if (err)
+		goto exit_free_rc;
+
+	device_init_wakeup(&device->dev, 1);
+
+	wbcir_init_hw(data);
+
+	return 0;
+
+exit_free_rc:
+	rc_free_device(data->dev);
+exit_unregister_led:
+	led_classdev_unregister(&data->led);
+exit_unregister_rxtrigger:
+	led_trigger_unregister_simple(data->rxtrigger);
+exit_unregister_txtrigger:
+	led_trigger_unregister_simple(data->txtrigger);
+exit_free_irq:
+	free_irq(data->irq, device);
+exit_release_sbase:
+	release_region(data->sbase, SP_IOMEM_LEN);
+exit_release_ebase:
+	release_region(data->ebase, EHFUNC_IOMEM_LEN);
+exit_release_wbase:
+	release_region(data->wbase, WAKEUP_IOMEM_LEN);
+exit_free_data:
+	kfree(data);
+	pnp_set_drvdata(device, NULL);
+exit:
+	return err;
+}
+
+static void __devexit
+wbcir_remove(struct pnp_dev *device)
+{
+	struct wbcir_data *data = pnp_get_drvdata(device);
+
+	/* Disable interrupts */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+	free_irq(data->irq, device);
+
+	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
+
+	/* Clear CEIR_EN */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
+
+	/* Clear BUFF_EN, END_EN, MATCH_EN */
+	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
+
+	rc_unregister_device(data->dev);
+
+	led_trigger_unregister_simple(data->rxtrigger);
+	led_trigger_unregister_simple(data->txtrigger);
+	led_classdev_unregister(&data->led);
+
+	/* This is ok since &data->led isn't actually used */
+	wbcir_led_brightness_set(&data->led, LED_OFF);
+
+	release_region(data->wbase, WAKEUP_IOMEM_LEN);
+	release_region(data->ebase, EHFUNC_IOMEM_LEN);
+	release_region(data->sbase, SP_IOMEM_LEN);
+
+	kfree(data);
+
+	pnp_set_drvdata(device, NULL);
+}
+
+static const struct pnp_device_id wbcir_ids[] = {
+	{ "WEC1022", 0 },
+	{ "", 0 }
+};
+MODULE_DEVICE_TABLE(pnp, wbcir_ids);
+
+static struct pnp_driver wbcir_driver = {
+	.name     = WBCIR_NAME,
+	.id_table = wbcir_ids,
+	.probe    = wbcir_probe,
+	.remove   = __devexit_p(wbcir_remove),
+	.suspend  = wbcir_suspend,
+	.resume   = wbcir_resume,
+	.shutdown = wbcir_shutdown
+};
+
+static int __init
+wbcir_init(void)
+{
+	int ret;
+
+	switch (protocol) {
+	case IR_PROTOCOL_RC5:
+	case IR_PROTOCOL_NEC:
+	case IR_PROTOCOL_RC6:
+		break;
+	default:
+		printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n");
+	}
+
+	ret = pnp_register_driver(&wbcir_driver);
+	if (ret)
+		printk(KERN_ERR DRVNAME ": Unable to register driver\n");
+
+	return ret;
+}
+
+static void __exit
+wbcir_exit(void)
+{
+	pnp_unregister_driver(&wbcir_driver);
+}
+
+module_init(wbcir_init);
+module_exit(wbcir_exit);
+
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 2eb258327722de3ed4d84ce1b9add2bad21a0ec4 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 12 Nov 2010 09:02:40 -0300
Subject: [media] ir-kbd-i2c: add rc_dev as a parameter to the driver

There are several fields on rc_dev that drivers can benefit. Allow drivers
to pass it as a parameter to the driver.

For now, the rc_dev parameter is optional. If drivers don't pass it, create
them internally. However, the best is to create rc_dev inside the drivers,
in order to fill other fields, like open(), close(), driver_name, etc.
So, a latter patch making it mandatory and changing the caller drivers is
welcome.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ir-kbd-i2c.c | 45 +++++++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 83b59a195230..de0060fa33f1 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -271,20 +271,16 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	const char *name = NULL;
 	u64 ir_type = IR_TYPE_UNKNOWN;
 	struct IR_i2c *ir;
-	struct rc_dev *rc;
+	struct rc_dev *rc = NULL;
 	struct i2c_adapter *adap = client->adapter;
 	unsigned short addr = client->addr;
 	int err;
 
-	ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
-	rc = rc_allocate_device();
-	if (!ir || !rc) {
-		err = -ENOMEM;
-		goto err_out_free;
-	}
+	ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
 
 	ir->c = client;
-	ir->rc = rc;
 	ir->polling_interval = DEFAULT_POLLING_INTERVAL;
 	i2c_set_clientdata(client, ir);
 
@@ -333,6 +329,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 						client->dev.platform_data;
 
 		ir_codes = init_data->ir_codes;
+		rc = init_data->rc_dev;
+
 		name = init_data->name;
 		if (init_data->type)
 			ir_type = init_data->type;
@@ -366,6 +364,19 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 	}
 
+	if (!rc) {
+		/*
+		 * If platform_data doesn't specify rc_dev, initilize it
+		 * internally
+		 */
+		rc = rc_allocate_device();
+		if (!rc) {
+			err = -ENOMEM;
+			goto err_out_free;
+		}
+	}
+	ir->rc = rc;
+
 	/* Make sure we are all setup before going on */
 	if (!name || !ir->get_key || !ir_type || !ir_codes) {
 		dprintk(1, ": Unsupported device at address 0x%02x\n",
@@ -382,12 +393,21 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 dev_name(&adap->dev),
 		 dev_name(&client->dev));
 
-	/* init + register input device */
+	/*
+	 * Initialize input_dev fields
+	 * It doesn't make sense to allow overriding them via platform_data
+	 */
 	rc->input_id.bustype = BUS_I2C;
-	rc->input_name       = ir->name;
 	rc->input_phys       = ir->phys;
-	rc->map_name         = ir->ir_codes;
-	rc->driver_name      = MODULE_NAME;
+	rc->input_name	     = ir->name;
+
+	/*
+	 * Initialize the other fields of rc_dev
+	 */
+	rc->map_name       = ir->ir_codes;
+	rc->allowed_protos = ir_type;
+	if (!rc->driver_name)
+		rc->driver_name = MODULE_NAME;
 
 	err = rc_register_device(rc);
 	if (err)
@@ -403,6 +423,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return 0;
 
  err_out_free:
+	/* Only frees rc if it were allocated internally */
 	rc_free_device(rc);
 	kfree(ir);
 	return err;
-- 
cgit v1.2.3


From 141bb0dc2d0ad03202aef7c070555cd970ca6bf9 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 11 Nov 2010 08:14:16 -0300
Subject: [media] cx231xx: Fix i2c support at cx231xx-input

There was a bug at cx231xx-input, where it were registering the remote
controls twice, one via ir-kbd-i2c and another directly.
Also, the patch that added rc_register_device() broke compilation for it.

This patch fixes cx231xx-input by fixing the depends on, to point to the
new symbol, and initializing the scanmask via platform_data.

While here, also fix Kconfig symbol change for IR core dependencies.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/Kconfig         |  2 +-
 drivers/media/video/cx231xx/cx231xx-input.c | 55 +++++++++--------------------
 drivers/media/video/cx231xx/cx231xx.h       | 21 +----------
 3 files changed, 19 insertions(+), 59 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index ab7d5df50f55..d6a235007a7d 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -16,7 +16,7 @@ config VIDEO_CX231XX
 
 config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
-	depends on VIDEO_IR
+	depends on IR_CORE
 	depends on VIDEO_CX231XX
 	default y
 	---help---
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 6725244c400c..65d951e03c17 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -29,6 +29,8 @@ static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
 {
 	u8	cmd;
 
+	dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__);
+
 		/* poll IR chip */
 	if (1 != i2c_master_recv(ir->c, &cmd, 1))
 		return -EIO;
@@ -40,7 +42,7 @@ static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
 	if (cmd == 0xff)
 		return 0;
 
-	dev_dbg(&ir->input->dev, "scancode = %02x\n", cmd);
+	dev_dbg(&ir->rc->input_dev->dev, "scancode = %02x\n", cmd);
 
 	*ir_key = cmd;
 	*ir_raw = cmd;
@@ -49,9 +51,7 @@ static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
 
 int cx231xx_ir_init(struct cx231xx *dev)
 {
-	struct input_dev *input_dev;
 	struct i2c_board_info info;
-	int rc;
 	u8 ir_i2c_bus;
 
 	dev_dbg(&dev->udev->dev, "%s\n", __func__);
@@ -60,34 +60,18 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	if (!cx231xx_boards[dev->model].rc_map)
 		return -ENODEV;
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
 	request_module("ir-kbd-i2c");
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
-	memset(&dev->ir.init_data, 0, sizeof(dev->ir.init_data));
+	memset(&dev->init_data, 0, sizeof(dev->init_data));
+	dev->init_data.rc_dev = rc_allocate_device();
+	if (!dev->init_data.rc_dev)
+		return -ENOMEM;
 
-	dev->ir.input_dev = input_dev;
-	dev->ir.init_data.name = cx231xx_boards[dev->model].name;
-	dev->ir.props.priv = dev;
-	dev->ir.props.allowed_protos = IR_TYPE_NEC;
-	snprintf(dev->ir.name, sizeof(dev->ir.name),
-		 "cx231xx IR (%s)", cx231xx_boards[dev->model].name);
-	usb_make_path(dev->udev, dev->ir.phys, sizeof(dev->ir.phys));
-	strlcat(dev->ir.phys, "/input0", sizeof(dev->ir.phys));
+	dev->init_data.name = cx231xx_boards[dev->model].name;
 
 	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-	info.platform_data = &dev->ir.init_data;
-
-	input_dev->name = dev->ir.name;
-	input_dev->phys = dev->ir.phys;
-	input_dev->dev.parent = &dev->udev->dev;
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.version = 1;
-	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	info.platform_data = &dev->init_data;
 
 	/*
 	 * Board-dependent values
@@ -95,28 +79,23 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	 * For now, there's just one type of hardware design using
 	 * an i2c device.
 	 */
-	dev->ir.init_data.get_key = get_key_isdbt;
-	dev->ir.init_data.ir_codes = cx231xx_boards[dev->model].rc_map;
+	dev->init_data.get_key = get_key_isdbt;
+	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map;
 	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
-	dev->ir.props.scanmask = 0xff;
+	dev->init_data.rc_dev->scanmask = 0xff;
+	dev->init_data.rc_dev->driver_name = "cx231xx";
+	dev->init_data.type = IR_TYPE_NEC;
 	info.addr = 0x30;
 
-	rc = ir_input_register(input_dev, cx231xx_boards[dev->model].rc_map,
-			       &dev->ir.props, MODULE_NAME);
-	if (rc < 0)
-		return rc;
-
 	/* Load and bind ir-kbd-i2c */
 	ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
+	dev_dbg(&dev->udev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
+		ir_i2c_bus, info.addr);
 	i2c_new_device(&dev->i2c_bus[ir_i2c_bus].i2c_adap, &info);
 
-	return rc;
+	return 0;
 }
 
 void cx231xx_ir_exit(struct cx231xx *dev)
 {
-	if (dev->ir.input_dev) {
-		ir_input_unregister(dev->ir.input_dev);
-		dev->ir.input_dev = NULL;
-	}
 }
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index c439e778c4b1..fcccc9d2a08e 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -602,25 +602,6 @@ struct cx231xx_tsport {
 	void                       *port_priv;
 };
 
-struct cx231xx_ir_t {
-	struct input_dev *input_dev;
-	char name[40];
-	char phys[32];
-
-#if 0	
-	/*
-	 * Due to a Kconfig change, cx231xx-input is not being compiled.
-	 * This structure disappeared, but other fixes are also needed.
-	 * So, as a workaround, let's just comment this struct and let a
-	 * latter patch fix it.
-	 */
-	struct ir_dev_props props;
-#endif
-
-	/* I2C keyboard data */
-	struct IR_i2c_init_data    init_data;
-};
-
 /* main device struct */
 struct cx231xx {
 	/* generic device properties */
@@ -631,7 +612,7 @@ struct cx231xx {
 	struct cx231xx_board board;
 
 	/* For I2C IR support */
-	struct cx231xx_ir_t ir;
+	struct IR_i2c_init_data    init_data;
 
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int vbi_stream_on:1;	/* Locks streams for VBI */
-- 
cgit v1.2.3


From 9e21ccaa69674e1b0aa887722801258f7de842db Mon Sep 17 00:00:00 2001
From: VDR User <user.vdr@gmail.com>
Date: Sat, 30 Oct 2010 15:49:49 -0300
Subject: [media] dvb-usb-gp8psk: get firmware and fpga versions

This patch adds retrieval of firmware and FPGA versions of Genpix devices.
That information is useful for users who experience performance differences
with the various firmware versions, and may want to use a specific firmware
that best suits their needs.

Example dmesg output:
gp8psk: FW Version = 2.09.4 (0x20904)  Build 2009/04/02
gp8psk: FPGA Version = 1

Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/gp8psk.c | 28 ++++++++++++++++++++++++++++
 drivers/media/dvb/dvb-usb/gp8psk.h |  8 +++++++-
 2 files changed, 35 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index c821293dbc22..1cb3d9a66e02 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -24,6 +24,33 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
+{
+	return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
+}
+
+static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
+{
+	return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1));
+}
+
+static void gp8psk_info(struct dvb_usb_device *d)
+{
+	u8 fpga_vers, fw_vers[6];
+
+	if (!gp8psk_get_fw_version(d, fw_vers))
+		info("FW Version = %i.%02i.%i (0x%x)  Build %4i/%02i/%02i",
+		fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
+		2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
+	else
+		info("failed to get FW version");
+
+	if (!gp8psk_get_fpga_version(d, &fpga_vers))
+		info("FPGA Version = %i", fpga_vers);
+	else
+		info("failed to get FPGA version");
+}
+
 int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
 {
 	int ret = 0,try = 0;
@@ -146,6 +173,7 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
 			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
 				return -EINVAL;
+			gp8psk_info(d);
 		}
 
 		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index e83a57506cfa..831749a518cb 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -25,7 +25,6 @@ extern int dvb_usb_gp8psk_debug;
 #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
 #define deb_rc(args...)   dprintk(dvb_usb_gp8psk_debug,0x04,args)
 #define deb_fe(args...)   dprintk(dvb_usb_gp8psk_debug,0x08,args)
-/* gp8psk commands */
 
 /* Twinhan Vendor requests */
 #define TH_COMMAND_IN                     0xC0
@@ -49,8 +48,10 @@ extern int dvb_usb_gp8psk_debug;
 #define SET_DVB_MODE                    0x8E
 #define SET_DN_SWITCH                   0x8F
 #define GET_SIGNAL_LOCK                 0x90    /* in */
+#define GET_FW_VERS			0x92
 #define GET_SERIAL_NUMBER               0x93    /* in */
 #define USE_EXTRA_VOLT                  0x94
+#define GET_FPGA_VERS			0x95
 #define CW3K_INIT			0x9d
 
 /* PSK_configuration bits */
@@ -88,6 +89,11 @@ extern int dvb_usb_gp8psk_debug;
 #define PRODUCT_STRING_READ               0x0D
 #define FW_BCD_VERSION_READ               0x14
 
+/* firmware revision id's */
+#define GP8PSK_FW_REV1			0x020604
+#define GP8PSK_FW_REV2			0x020704
+#define GP8PSK_FW_VERS(_fw_vers)	((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
+
 extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
 extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
 extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
-- 
cgit v1.2.3


From 1ce6a1433572c650247480e1bbbca6bd61db7874 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 30 Oct 2010 18:08:31 -0300
Subject: [media] drivers/media/video: Update WARN uses

Add missing newlines.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s5p-fimc/fimc-core.c | 2 +-
 drivers/media/video/sr030pc30.c          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index bb99f2d805d3..817aa66627f6 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -543,7 +543,7 @@ static void fimc_dma_run(void *priv)
 	unsigned long flags;
 	u32 ret;
 
-	if (WARN(!ctx, "null hardware context"))
+	if (WARN(!ctx, "null hardware context\n"))
 		return;
 
 	fimc = ctx->fimc_dev;
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index c9dc67aba980..864696b7a006 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -735,7 +735,7 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	const struct sr030pc30_platform_data *pdata = info->pdata;
 	int ret;
 
-	if (WARN(pdata == NULL, "No platform data!"))
+	if (WARN(pdata == NULL, "No platform data!\n"))
 		return -ENOMEM;
 
 	/*
-- 
cgit v1.2.3


From 76e4a9a7164263d8ffe816920f84a91e7dfee444 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 1 Nov 2010 06:25:39 -0300
Subject: [media] tea6415c: return -EIO if i2c_check_functionality fails

If the adapter does not support I2C_FUNC_SMBUS_WRITE_BYTE,
return -EIO instead of 0.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tea6415c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 3e99cea8e4dc..19621ed523ec 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -148,7 +148,7 @@ static int tea6415c_probe(struct i2c_client *client,
 
 	/* let's see whether this adapter can support what we need */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
-		return 0;
+		return -EIO;
 
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
-- 
cgit v1.2.3


From 0e72cc8b8d48ba05e705f432fb99aaa0ea6737c6 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 2 Nov 2010 00:22:23 -0300
Subject: [media] saa7164: make buffer smaller

This isn't a runtime bug, it's just to make static checkers happy.

In vidioc_querycap() we copy a saa7164_dev ->name driver array into a
v4l2_capability -> driver array.  The ->driver array is only 16 chars
long so ->name also can't be more than 16 characters.

The ->name gets set in v4l2_capability() and it always is less than 16
characters so we can easily make the buffer smaller.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 2 +-
 drivers/media/video/saa7164/saa7164.h      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index e1bac5051460..b66f78f7042c 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -1001,7 +1001,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
 	atomic_inc(&dev->refcount);
 	dev->nr = saa7164_devcount++;
 
-	sprintf(dev->name, "saa7164[%d]", dev->nr);
+	snprintf(dev->name, sizeof(dev->name), "saa7164[%d]", dev->nr);
 
 	mutex_lock(&devlist);
 	list_add_tail(&dev->devlist, &saa7164_devlist);
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 041ae8e20f68..74df9c627a96 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -447,7 +447,7 @@ struct saa7164_dev {
 	int	nr;
 	int	hwrevision;
 	u32	board;
-	char	name[32];
+	char	name[16];
 
 	/* firmware status */
 	struct saa7164_fw_status	fw_status;
-- 
cgit v1.2.3


From bc25068495b110fcdf35a22f43d32637e99fd018 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Fri, 12 Nov 2010 18:32:36 -0300
Subject: [media] saa7164: Checkpatch compliance cleanup

Checkpatch compliance cleanup across files in the saa7164 driver.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-api.c     | 123 +++++++++++++++++---------
 drivers/media/video/saa7164/saa7164-buffer.c  |  92 ++++++++++---------
 drivers/media/video/saa7164/saa7164-bus.c     |  16 ++--
 drivers/media/video/saa7164/saa7164-cards.c   |   2 +-
 drivers/media/video/saa7164/saa7164-cmd.c     |  10 ++-
 drivers/media/video/saa7164/saa7164-core.c    |  38 ++++----
 drivers/media/video/saa7164/saa7164-encoder.c |  33 ++++---
 drivers/media/video/saa7164/saa7164-fw.c      |   8 +-
 drivers/media/video/saa7164/saa7164-i2c.c     |   4 +-
 drivers/media/video/saa7164/saa7164-vbi.c     |  37 +++++---
 drivers/media/video/saa7164/saa7164.h         |  15 ++--
 11 files changed, 215 insertions(+), 163 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index ad3bc4154176..bd86d970f4c2 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -40,9 +40,8 @@ int saa7164_api_get_load_info(struct saa7164_dev *dev, struct tmFwInfoStruct *i)
 
 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		GET_FW_STATUS_CONTROL, sizeof(struct tmFwInfoStruct), i);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
 
 	printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad);
 
@@ -63,14 +62,15 @@ int saa7164_api_collect_debug(struct saa7164_dev *dev)
 
 		ret = saa7164_cmd_send(dev, 0, GET_CUR,
 			GET_DEBUG_DATA_CONTROL, sizeof(d), &d);
-		if (ret != SAA_OK) {
-			printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-		}
+		if (ret != SAA_OK)
+			printk(KERN_ERR "%s() error, ret = 0x%x\n",
+				__func__, ret);
 
 		if (d.dwResult != SAA_OK)
 			break;
 
-		printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr, d.ucDebugData);
+		printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr,
+			d.ucDebugData);
 	}
 
 	return 0;
@@ -86,9 +86,9 @@ int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level)
 	/* Retrieve current state */
 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
+
 	dprintk(DBGLVL_API, "%s() Was %d\n", __func__, lvl.dwDebugLevel);
 
 	lvl.dwDebugLevel = level;
@@ -96,9 +96,8 @@ int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level)
 	/* set new state */
 	ret = saa7164_cmd_send(dev, 0, SET_CUR,
 		SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
 
 	return ret;
 }
@@ -152,8 +151,10 @@ int saa7164_api_set_vbi_format(struct saa7164_port *port)
 				dprintk(DBGLVL_API, "SET/COMMIT Verified\n");
 
 			dprintk(DBGLVL_API, "rsp.bmHint = 0x%x\n", rsp.bmHint);
-			dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n", rsp.bFormatIndex);
-			dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n", rsp.bFrameIndex);
+			dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n",
+				rsp.bFormatIndex);
+			dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n",
+				rsp.bFrameIndex);
 		} else
 			printk(KERN_ERR "%s() compare failed\n", __func__);
 	}
@@ -210,14 +211,17 @@ int saa7164_api_set_encoder(struct saa7164_port *port)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
 	/* Establish video bitrates */
-	if (port->encoder_params.bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
+	if (port->encoder_params.bitrate_mode ==
+		V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
 		vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_CONSTANT;
 	else
 		vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK;
 	vb.dwVideoBitRate = port->encoder_params.bitrate;
 	vb.dwVideoBitRatePeak = port->encoder_params.bitrate_peak;
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR,
-		EU_VIDEO_BIT_RATE_CONTROL, sizeof(struct tmComResEncVideoBitRate), &vb);
+		EU_VIDEO_BIT_RATE_CONTROL,
+		sizeof(struct tmComResEncVideoBitRate),
+		&vb);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -226,9 +230,12 @@ int saa7164_api_set_encoder(struct saa7164_port *port)
 	ab.dwAudioBitRate = 384000;
 	ab.dwAudioBitRatePeak = ab.dwAudioBitRate;
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR,
-		EU_AUDIO_BIT_RATE_CONTROL, sizeof(struct tmComResEncAudioBitRate), &ab);
+		EU_AUDIO_BIT_RATE_CONTROL,
+		sizeof(struct tmComResEncAudioBitRate),
+		&ab);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__,
+			ret);
 
 	saa7164_api_set_aspect_ratio(port);
 	saa7164_api_set_gop_size(port);
@@ -244,7 +251,8 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 	struct tmComResEncVideoInputAspectRatio ar;
 	int ret;
 
-	dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, port->hwcfg.sourceid);
+	dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__,
+		port->hwcfg.sourceid);
 
 	port->encoder_profile = 0;
 	port->video_format = 0;
@@ -257,7 +265,8 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR,
-		EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8), &port->video_resolution);
+		EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8),
+		&port->video_resolution);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -294,13 +303,20 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 	dprintk(DBGLVL_ENC, "video_format    = %d\n", port->video_format);
 	dprintk(DBGLVL_ENC, "audio_format    = %d\n", port->audio_format);
 	dprintk(DBGLVL_ENC, "video_resolution= %d\n", port->video_resolution);
-	dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n", v.ucVideoBitRateMode);
-	dprintk(DBGLVL_ENC, "v.dwVideoBitRate     = %d\n", v.dwVideoBitRate);
-	dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n", v.dwVideoBitRatePeak);
-	dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n", a.ucAudioBitRateMode);
-	dprintk(DBGLVL_ENC, "a.dwVideoBitRate     = %d\n", a.dwAudioBitRate);
-	dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n", a.dwAudioBitRatePeak);
-	dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n", ar.width, ar.height);
+	dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n",
+		v.ucVideoBitRateMode);
+	dprintk(DBGLVL_ENC, "v.dwVideoBitRate     = %d\n",
+		v.dwVideoBitRate);
+	dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n",
+		v.dwVideoBitRatePeak);
+	dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n",
+		a.ucAudioBitRateMode);
+	dprintk(DBGLVL_ENC, "a.dwVideoBitRate     = %d\n",
+		a.dwAudioBitRate);
+	dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n",
+		a.dwAudioBitRatePeak);
+	dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n",
+		ar.width, ar.height);
 
 	return ret;
 }
@@ -439,7 +455,8 @@ int saa7164_api_set_videomux(struct saa7164_port *port)
 
 	/* Audio Mux */
 	ret = saa7164_cmd_send(port->dev, port->audfeat.sourceid, SET_CUR,
-		SU_INPUT_SELECT_CONTROL, sizeof(u8), &inputs[port->mux_input - 1]);
+		SU_INPUT_SELECT_CONTROL, sizeof(u8),
+		&inputs[port->mux_input - 1]);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -492,7 +509,8 @@ int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level)
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
-	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v);
+	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__,
+		level, min, max, v);
 
 	v = level;
 	if (v < min)
@@ -517,7 +535,8 @@ int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level)
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
-	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v);
+	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__,
+		level, min, max, v);
 
 	return ret;
 }
@@ -539,7 +558,8 @@ int saa7164_api_set_audio_std(struct saa7164_port *port)
 	lvl.ucSAP_Level = TMHW_LEV_ADJ_SAPLEV_DEFAULT;
 	lvl.ucADC_Level = TMHW_LEV_ADJ_ADCLEV_DEFAULT;
 	ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR,
-		AUDIO_DEFAULT_CONTROL, sizeof(struct tmComResAudioDefaults), &lvl);
+		AUDIO_DEFAULT_CONTROL, sizeof(struct tmComResAudioDefaults),
+		&lvl);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -555,7 +575,8 @@ int saa7164_api_set_audio_std(struct saa7164_port *port)
 	ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR,
 		TU_STANDARD_CONTROL, sizeof(tvaudio), &tvaudio);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n",
+			__func__, ret);
 	return ret;
 }
 
@@ -575,7 +596,9 @@ int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect)
 	ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR,
 		TU_STANDARD_AUTO_CONTROL, sizeof(p), &p);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR
+			"%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n",
+			__func__, ret);
 
 	return ret;
 }
@@ -646,9 +669,9 @@ int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val)
 		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
-
-	//saa7164_dumphex16(dev, buf, 16);
-
+#if 0
+	saa7164_dumphex16(dev, buf, 16);
+#endif
 	return ret == SAA_OK ? 0 : -EIO;
 }
 
@@ -696,7 +719,8 @@ int saa7164_api_configure_dif(struct saa7164_port *port, u32 std)
 	} else {
 		/* Unknown standard, assume DTV */
 		dprintk(DBGLVL_API, " Unknown (assuming DTV)\n");
-		saa7164_api_set_dif(port, 0x00, 0x80); /* Undefined Video Standard */
+		/* Undefinded Video Standard */
+		saa7164_api_set_dif(port, 0x00, 0x80);
 		agc_disable = 1;
 	}
 
@@ -933,7 +957,7 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 		if (hdr->type != CS_INTERFACE)
 			return SAA_ERR_NOT_SUPPORTED;
 
-		dprintk(DBGLVL_API, "@ 0x%x = \n", idx);
+		dprintk(DBGLVL_API, "@ 0x%x =\n", idx);
 		switch (hdr->subtype) {
 		case GENERAL_REQUEST:
 			dprintk(DBGLVL_API, " GENERAL_REQUEST\n");
@@ -1085,7 +1109,8 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 						vbiport = &dev->ports[SAA7164_PORT_VBI2];
 					memcpy(&vbiport->hwcfg, vcoutputtermhdr,
 						sizeof(*vcoutputtermhdr));
-					memcpy(&vbiport->vbi_fmt_ntsc, vbifmt, sizeof(*vbifmt));
+					memcpy(&vbiport->vbi_fmt_ntsc, vbifmt,
+						sizeof(*vbifmt));
 					saa7164_api_configure_port_vbi(dev,
 						vbiport);
 					break;
@@ -1134,7 +1159,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->tunerunit, tunerunithdr,
 					sizeof(struct tmComResTunerDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d] tuner)\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d] tuner)\n",
+					encport->nr);
 			}
 			break;
 		case VC_SELECTOR_UNIT:
@@ -1163,7 +1190,8 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->vidproc, pdh,
 					sizeof(struct tmComResProcDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case FEATURE_UNIT:
@@ -1181,15 +1209,18 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 				encport = &dev->ports[SAA7164_PORT_ENC2];
 			memcpy(&encport->audfeat, afd,
 				sizeof(struct tmComResAFeatureDescrHeader));
-			dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+			dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n",
+				encport->nr);
 			break;
 		case ENCODER_UNIT:
 			edh = (struct tmComResEncoderDescrHeader *)(buf + idx);
 			dprintk(DBGLVL_API, " ENCODER_UNIT\n");
 			dprintk(DBGLVL_API, "  subtype = 0x%x\n", edh->subtype);
 			dprintk(DBGLVL_API, "  unitid = 0x%x\n", edh->unitid);
-			dprintk(DBGLVL_API, "  vsourceid = 0x%x\n", edh->vsourceid);
-			dprintk(DBGLVL_API, "  asourceid = 0x%x\n", edh->asourceid);
+			dprintk(DBGLVL_API, "  vsourceid = 0x%x\n",
+			edh->vsourceid);
+			dprintk(DBGLVL_API, "  asourceid = 0x%x\n",
+				edh->asourceid);
 			dprintk(DBGLVL_API, "  iunit = 0x%x\n", edh->iunit);
 			if (edh->iunit == edh->unitid) {
 				if (currpath == 1)
@@ -1198,7 +1229,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->encunit, edh,
 					sizeof(struct tmComResEncoderDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case EXTENSION_UNIT:
@@ -1262,7 +1295,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->ifunit, exthdr,
 					sizeof(struct tmComResExtDevDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case PVC_INFRARED_UNIT:
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 7230912acc7d..ddd25211c9e8 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -24,46 +24,46 @@
 #include "saa7164.h"
 
 /* The PCI address space for buffer handling looks like this:
-
- +-u32 wide-------------+
- |                      +
- +-u64 wide------------------------------------+
- +                                             +
- +----------------------+
- | CurrentBufferPtr     + Pointer to current PCI buffer >-+
- +----------------------+                                 |
- | Unused               +                                 |
- +----------------------+                                 |
- | Pitch                + = 188 (bytes)                   |
- +----------------------+                                 |
- | PCI buffer size      + = pitch * number of lines (312) |
- +----------------------+                                 |
- |0| Buf0 Write Offset  +                                 |
- +----------------------+                                 v
- |1| Buf1 Write Offset  +                                 |
- +----------------------+                                 |
- |2| Buf2 Write Offset  +                                 |
- +----------------------+                                 |
- |3| Buf3 Write Offset  +                                 |
- +----------------------+                                 |
- ... More write offsets                                   |
- +---------------------------------------------+          |
- +0| set of ptrs to PCI pagetables             +          |
- +---------------------------------------------+          |
- +1| set of ptrs to PCI pagetables             + <--------+
- +---------------------------------------------+
- +2| set of ptrs to PCI pagetables             +
- +---------------------------------------------+
- +3| set of ptrs to PCI pagetables             + >--+
- +---------------------------------------------+    |
- ... More buffer pointers                           |  +----------------+
-						    +->| pt[0] TS data  |
-						    |  +----------------+
-						    |
-						    |  +----------------+
-						    +->| pt[1] TS data  |
-						    |  +----------------+
-						    | etc
+ *
+ * +-u32 wide-------------+
+ * |                      +
+ * +-u64 wide------------------------------------+
+ * +                                             +
+ * +----------------------+
+ * | CurrentBufferPtr     + Pointer to current PCI buffer >-+
+ * +----------------------+                                 |
+ * | Unused               +                                 |
+ * +----------------------+                                 |
+ * | Pitch                + = 188 (bytes)                   |
+ * +----------------------+                                 |
+ * | PCI buffer size      + = pitch * number of lines (312) |
+ * +----------------------+                                 |
+ * |0| Buf0 Write Offset  +                                 |
+ * +----------------------+                                 v
+ * |1| Buf1 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |2| Buf2 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |3| Buf3 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * ... More write offsets                                   |
+ * +---------------------------------------------+          |
+ * +0| set of ptrs to PCI pagetables             +          |
+ * +---------------------------------------------+          |
+ * +1| set of ptrs to PCI pagetables             + <--------+
+ * +---------------------------------------------+
+ * +2| set of ptrs to PCI pagetables             +
+ * +---------------------------------------------+
+ * +3| set of ptrs to PCI pagetables             + >--+
+ * +---------------------------------------------+    |
+ * ... More buffer pointers                           |  +----------------+
+ *						    +->| pt[0] TS data  |
+ *						    |  +----------------+
+ *						    |
+ *						    |  +----------------+
+ *						    +->| pt[1] TS data  |
+ *						    |  +----------------+
+ *						    | etc
  */
 
 void saa7164_buffer_display(struct saa7164_buffer *buf)
@@ -283,7 +283,8 @@ int saa7164_buffer_cfg_port(struct saa7164_port *port)
 	return 0;
 }
 
-struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev, u32 len)
+struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev,
+	u32 len)
 {
 	struct saa7164_user_buffer *buf;
 
@@ -313,12 +314,9 @@ void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf)
 	if (!buf)
 		return;
 
-	if (buf->data) {
-		kfree(buf->data);
-		buf->data = 0;
-	}
+	kfree(buf->data);
+	buf->data = 0;
 
-	if (buf)
-		kfree(buf);
+	kfree(buf);
 }
 
diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c
index 30d5283da41e..b2b0d97101d0 100644
--- a/drivers/media/video/saa7164/saa7164-bus.c
+++ b/drivers/media/video/saa7164/saa7164-bus.c
@@ -43,7 +43,8 @@ int saa7164_bus_setup(struct saa7164_dev *dev)
 
 	b->m_dwSizeGetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
 
-	b->m_dwSetWritePos	= ((u32)dev->intfdesc.BARLocation) + (2 * sizeof(u64));
+	b->m_dwSetWritePos	= ((u32)dev->intfdesc.BARLocation) +
+		(2 * sizeof(u64));
 	b->m_dwSetReadPos	= b->m_dwSetWritePos + (1 * sizeof(u32));
 
 	b->m_dwGetWritePos	= b->m_dwSetWritePos + (2 * sizeof(u32));
@@ -105,7 +106,8 @@ void saa7164_bus_verify(struct saa7164_dev *dev)
 	}
 }
 
-void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m, void *buf)
+void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m,
+	void *buf)
 {
 	dprintk(DBGLVL_BUS, "Dumping msg structure:\n");
 	dprintk(DBGLVL_BUS, " .id               = %d\n",   m->id);
@@ -129,7 +131,8 @@ void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m, void *
  *  SAA_OK     The function executed successfully.
  *  < 0        One or more members are not initialized.
  */
-int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf)
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u32 bytes_to_write, free_write_space, timeout, curr_srp, curr_swp;
@@ -294,14 +297,15 @@ out:
 /*
  * Receive a command or a response from the bus. The implementation does not
  * know if it is a command or a response it simply dequeues the data,
- * depending on the bus information given in the struct tmComResBusInfo structure.
+ * depending on the bus information given in the struct tmComResBusInfo
+ * structure.
  *
  * Return Value:
  *  0          The function executed successfully.
  *  < 0        One or more members are not initialized.
  */
-int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf,
-	int peekonly)
+int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf, int peekonly)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u32 bytes_to_read, write_distance, curr_grp, curr_gwp,
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 4cb634e952a6..69822a4e7275 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -482,7 +482,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
 
-		msleep(10);
+		msleep(20);
 
 		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
 		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 301a9e302f45..a97ae17b36c2 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -122,8 +122,8 @@ int saa7164_irq_dequeue(struct saa7164_dev *dev)
 				return ret;
 		}
 
-		/* It's unlikely to have more than 4 or 5 pending messages, ensure we exit
-		 * at some point regardles.
+		/* It's unlikely to have more than 4 or 5 pending messages,
+		 * ensure we exit at some point regardless.
 		 */
 	} while (i++ < 32);
 
@@ -186,7 +186,8 @@ int saa7164_cmd_dequeue(struct saa7164_dev *dev)
 	return SAA_OK;
 }
 
-int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf)
+int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg,
+	void *buf)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u8 cmd_sent;
@@ -292,7 +293,8 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 			 * We typically are signalled in < 50ms but it can
 			 * take MUCH longer.
 			 */
-			wait_event_timeout(*q, dev->cmds[seqno].signalled, (HZ * waitsecs));
+			wait_event_timeout(*q, dev->cmds[seqno].signalled,
+				(HZ * waitsecs));
 			r = time_before(jiffies, stamp + (HZ * waitsecs));
 			if (r)
 				ret = SAA_OK;
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index b66f78f7042c..d6bf3f82cc34 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -40,12 +40,12 @@ MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>");
 MODULE_LICENSE("GPL");
 
 /*
-  1 Basic
-  2
-  4 i2c
-  8 api
- 16 cmd
- 32 bus
+ *  1 Basic
+ *  2
+ *  4 i2c
+ *  8 api
+ * 16 cmd
+ * 32 bus
  */
 
 unsigned int saa_debug;
@@ -82,7 +82,8 @@ MODULE_PARM_DESC(crc_checking, "enable crc sanity checking on buffers");
 
 unsigned int guard_checking = 1;
 module_param(guard_checking, int, 0644);
-MODULE_PARM_DESC(guard_checking, "enable dma sanity checking for buffer overruns");
+MODULE_PARM_DESC(guard_checking,
+	"enable dma sanity checking for buffer overruns");
 
 static unsigned int saa7164_devcount;
 
@@ -123,7 +124,9 @@ static void saa7164_pack_verifier(struct saa7164_buffer *buf)
 		if ((*(p + i + 0) != 0x00) || (*(p + i + 1) != 0x00) ||
 			(*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) {
 			printk(KERN_ERR "No pack at 0x%x\n", i);
-//			saa7164_dumphex16FF(buf->port->dev, (p + i), 32);
+#if 0
+			saa7164_dumphex16FF(buf->port->dev, (p + i), 32);
+#endif
 		}
 	}
 }
@@ -199,19 +202,16 @@ static void saa7164_histogram_reset(struct saa7164_histogram *hg, char *name)
 	strcpy(hg->name, name);
 
 	/* First 30ms x 1ms */
-	for (i = 0; i < 30; i++) {
+	for (i = 0; i < 30; i++)
 		hg->counter1[0 + i].val = i;
-	}
 
 	/* 30 - 200ms x 10ms  */
-	for (i = 0; i < 18; i++) {
+	for (i = 0; i < 18; i++)
 		hg->counter1[30 + i].val = 30 + (i * 10);
-	}
 
 	/* 200 - 2000ms x 100ms  */
-	for (i = 0; i < 15; i++) {
+	for (i = 0; i < 15; i++)
 		hg->counter1[48 + i].val = 200 + (i * 200);
-	}
 
 	/* Catch all massive value (2secs) */
 	hg->counter1[55].val = 2000;
@@ -315,7 +315,9 @@ static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr)
 					(*(p + buf->actual_size + 0x13) != 0xff)) {
 						printk(KERN_ERR "%s() buf %p guard buffer breach\n",
 							__func__, buf);
-//						saa7164_dumphex16FF(dev, (p + buf->actual_size) - 32 , 64);
+#if 0
+						saa7164_dumphex16FF(dev, (p + buf->actual_size) - 32 , 64);
+#endif
 				}
 			}
 
@@ -961,9 +963,7 @@ static int saa7164_port_init(struct saa7164_dev *dev, int portnr)
 
 		/* We need a deferred interrupt handler for cmd handling */
 		INIT_WORK(&port->workenc, saa7164_work_enchandler);
-	}
-	else
-	if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
+	} else if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
 		port->type = SAA7164_MPEG_VBI;
 
 		/* We need a deferred interrupt handler for cmd handling */
@@ -1169,7 +1169,7 @@ static int saa7164_proc_open(struct inode *inode, struct file *filp)
 	return single_open(filp, saa7164_proc_show, NULL);
 }
 
-static struct file_operations saa7164_proc_fops = {
+static const struct file_operations saa7164_proc_fops = {
 	.open		= saa7164_proc_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index cbb53d0ee979..1838408cd5cb 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -125,16 +125,22 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
 
 	dprintk(DBGLVL_ENC, "%s()\n", __func__);
 
-	if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) {
-		dprintk(DBGLVL_ENC, "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n", __func__);
+	if (port->encoder_params.stream_type ==
+		V4L2_MPEG_STREAM_TYPE_MPEG2_PS) {
+		dprintk(DBGLVL_ENC,
+			"%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n",
+			__func__);
 		params->samplesperline = 128;
 		params->numberoflines = 256;
 		params->pitch = 128;
 		params->numpagetables = 2 +
 			((SAA7164_PS_NUMBER_OF_LINES * 128) / PAGE_SIZE);
 	} else
-	if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_TS) {
-		dprintk(DBGLVL_ENC, "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n", __func__);
+	if (port->encoder_params.stream_type ==
+		V4L2_MPEG_STREAM_TYPE_MPEG2_TS) {
+		dprintk(DBGLVL_ENC,
+			"%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n",
+			__func__);
 		params->samplesperline = 188;
 		params->numberoflines = 312;
 		params->pitch = 188;
@@ -826,7 +832,8 @@ static int fill_queryctrl(struct saa7164_encoder_params *params,
 		return v4l2_ctrl_query_fill(c, 1, 255, 1, 15);
 	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
 		return v4l2_ctrl_query_fill(c,
-			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_CBR,
 			1, V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
 	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
 		return v4l2_ctrl_query_fill(c,
@@ -1113,7 +1120,9 @@ struct saa7164_user_buffer *saa7164_enc_next_buf(struct saa7164_port *port)
 		if (crc_checking) {
 			crc = crc32(0, ubuf->data, ubuf->actual_size);
 			if (crc != ubuf->crc) {
-				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", __func__,
+				printk(KERN_ERR
+		"%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
+					__func__,
 					ubuf, ubuf->crc, crc);
 			}
 		}
@@ -1201,9 +1210,8 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		buffer += cnt;
 		ret += cnt;
 
-		if (ubuf->pos > ubuf->actual_size) {
+		if (ubuf->pos > ubuf->actual_size)
 			printk(KERN_ERR "read() pos > actual, huh?\n");
-		}
 
 		if (ubuf->pos == ubuf->actual_size) {
 
@@ -1227,16 +1235,16 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		}
 	}
 err:
-	if (!ret && !ubuf) {
+	if (!ret && !ubuf)
 		ret = -EAGAIN;
-	}
 
 	return ret;
 }
 
 static unsigned int fops_poll(struct file *file, poll_table *wait)
 {
-	struct saa7164_encoder_fh *fh = (struct saa7164_encoder_fh *)file->private_data;
+	struct saa7164_encoder_fh *fh =
+		(struct saa7164_encoder_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
 	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
@@ -1249,9 +1257,8 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	saa7164_histogram_update(&port->poll_interval,
 		port->last_poll_msecs_diff);
 
-	if (!video_is_registered(port->v4l_device)) {
+	if (!video_is_registered(port->v4l_device))
 		return -EIO;
-	}
 
 	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
 		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index 484533c32bb1..22b02323dca9 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -178,7 +178,7 @@ int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
 			goto out;
 		}
 
-		msleep(10);
+		msleep(10); /* Checkpatch throws a < 20ms warning */
 		if (timeout++ > 60)
 			break;
 	}
@@ -235,7 +235,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 		while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 			dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
 				__func__, err_flags);
-			msleep(10);
+			msleep(10); /* Checkpatch throws a < 20ms warning */
 
 			if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 				printk(KERN_ERR "%s() firmware corrupt\n",
@@ -294,7 +294,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 			while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 				dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
 					__func__, err_flags);
-				msleep(10);
+				msleep(10); /* Checkpatch throws a < 20ms warning */
 
 				if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 					printk(KERN_ERR
@@ -365,7 +365,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 
 			first_timeout = SAA_DEVICE_TIMEOUT;
 			while (first_timeout) {
-				msleep(10);
+				msleep(10); /* Checkpatch throws a < 20ms warning */
 
 				version =
 					saa7164_getcurrentfirmwareversion(dev);
diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
index b5167d33650a..26148f76cba2 100644
--- a/drivers/media/video/saa7164/saa7164-i2c.c
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -23,7 +23,7 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include "saa7164.h"
 
@@ -65,7 +65,7 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 	}
 	return num;
 
- err:
+err:
 	return retval;
 }
 
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 323c7cdca37b..8abbe6d661e4 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -51,11 +51,15 @@ static void saa7164_vbi_configure(struct saa7164_port *port)
 	/* Set up the DIF (enable it) for analog mode by default */
 	saa7164_api_initialize_dif(port);
 
-//	/* Configure the correct video standard */
-//	saa7164_api_configure_dif(port, port->encodernorm.id);
+	/* Configure the correct video standard */
+#if 0
+	saa7164_api_configure_dif(port, port->encodernorm.id);
+#endif
 
-//	/* Ensure the audio decoder is correct configured */
-//	saa7164_api_set_audio_std(port);
+#if 0
+	/* Ensure the audio decoder is correct configured */
+	saa7164_api_set_audio_std(port);
+#endif
 	dprintk(DBGLVL_VBI, "%s() ends\n", __func__);
 }
 
@@ -919,8 +923,10 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
 	saa7164_vbi_buffers_alloc(port);
 
 	/* Configure the encoder with any cache values */
-//	saa7164_api_set_encoder(port);
-//	saa7164_api_get_encoder(port);
+#if 0
+	saa7164_api_set_encoder(port);
+	saa7164_api_get_encoder(port);
+#endif
 
 	/* Place the empty buffers on the hardware */
 	saa7164_buffer_cfg_port(port);
@@ -1060,7 +1066,8 @@ struct saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port)
 		if (crc_checking) {
 			crc = crc32(0, ubuf->data, ubuf->actual_size);
 			if (crc != ubuf->crc) {
-				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", __func__,
+				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
+					__func__,
 					ubuf, ubuf->crc, crc);
 			}
 		}
@@ -1148,9 +1155,8 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		buffer += cnt;
 		ret += cnt;
 
-		if (ubuf->pos > ubuf->actual_size) {
+		if (ubuf->pos > ubuf->actual_size)
 			printk(KERN_ERR "read() pos > actual, huh?\n");
-		}
 
 		if (ubuf->pos == ubuf->actual_size) {
 
@@ -1197,9 +1203,8 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	saa7164_histogram_update(&port->poll_interval,
 		port->last_poll_msecs_diff);
 
-	if (!video_is_registered(port->v4l_device)) {
+	if (!video_is_registered(port->v4l_device))
 		return -EIO;
-	}
 
 	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
 		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
@@ -1257,10 +1262,14 @@ static const struct v4l2_ioctl_ops vbi_ioctl_ops = {
 	.vidioc_try_ext_ctrls	 = vidioc_try_ext_ctrls,
 	.vidioc_log_status	 = vidioc_log_status,
 	.vidioc_queryctrl	 = vidioc_queryctrl,
-//	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
+#if 0
+	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
+#endif
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-//	.vidioc_g_register	 = saa7164_g_register,
-//	.vidioc_s_register	 = saa7164_s_register,
+#if 0
+	.vidioc_g_register	 = saa7164_g_register,
+	.vidioc_s_register	 = saa7164_s_register,
+#endif
 #endif
 	.vidioc_g_fmt_vbi_cap	 = saa7164_vbi_fmt,
 	.vidioc_try_fmt_vbi_cap	 = saa7164_vbi_fmt,
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 74df9c627a96..16745d2fb349 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -113,7 +113,8 @@
 #define DBGLVL_THR 4096
 #define DBGLVL_CPU 8192
 
-#define SAA7164_NORMS (V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443)
+#define SAA7164_NORMS \
+	(V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443)
 
 enum port_t {
 	SAA7164_MPEG_UNDEFINED = 0,
@@ -182,15 +183,11 @@ struct saa7164_subid {
 
 struct saa7164_encoder_fh {
 	struct saa7164_port *port;
-//	u32 freq;
-//	u32 tuner_type;
 	atomic_t v4l_reading;
 };
 
 struct saa7164_vbi_fh {
 	struct saa7164_port *port;
-//	u32 freq;
-//	u32 tuner_type;
 	atomic_t v4l_reading;
 };
 
@@ -265,8 +262,6 @@ struct saa7164_ctrl {
 struct saa7164_tvnorm {
 	char		*name;
 	v4l2_std_id	id;
-//	u32		cxiformat;
-//	u32		cxoformat;
 };
 
 struct saa7164_encoder_params {
@@ -510,7 +505,8 @@ extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus,
 /* saa7164-bus.c                                               */
 int saa7164_bus_setup(struct saa7164_dev *dev);
 void saa7164_bus_dump(struct saa7164_dev *dev);
-int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf);
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf);
 int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
 	void *buf, int peekonly);
 
@@ -552,7 +548,8 @@ int saa7164_api_get_videomux(struct saa7164_port *port);
 int saa7164_api_set_vbi_format(struct saa7164_port *port);
 int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level);
 int saa7164_api_collect_debug(struct saa7164_dev *dev);
-int saa7164_api_get_load_info(struct saa7164_dev *dev, struct tmFwInfoStruct *i);
+int saa7164_api_get_load_info(struct saa7164_dev *dev,
+	struct tmFwInfoStruct *i);
 
 /* ----------------------------------------------------------- */
 /* saa7164-cards.c                                             */
-- 
cgit v1.2.3


From c0b33bdc5b8d9c1120dece660480d4dd86b817ee Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 27 Oct 2010 09:12:30 -0300
Subject: [media] gspca-stv06xx: support bandwidth changing

stv06xx devices have only one altsetting, but the actual used
bandwidth can be programmed through a register. We were already
setting this register lower then the max packetsize of the altsetting
indicates. This patch makes the gspca-stv06xx update the usb descriptor
for the alt setting to reflect the actual packetsize in use, so that
the usb subsystem uses the correct information for scheduling usb transfers.

This patch also tries to fallback to lower speeds in case a ENOSPC error
is received when submitting urbs, but currently this is only supported
with stv06xx cams with the pb0100 sensor, as this is the only one for
which we know how to change the framerate.

This patch is based on an initial incomplete patch by
Lee Jones <lee.jones@canonical.com>

Signed-off-by: Lee Jones <lee.jones@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx.c        | 55 +++++++++++++++++++++-
 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h   | 11 ++++-
 drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c | 18 +++++--
 drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h |  3 ++
 drivers/media/video/gspca/stv06xx/stv06xx_sensor.h |  4 ++
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.c | 17 +------
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.h |  3 ++
 drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h |  9 ++--
 8 files changed, 93 insertions(+), 27 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 544d5f72a1e3..28ea4175b80e 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -263,7 +263,21 @@ static int stv06xx_init(struct gspca_dev *gspca_dev)
 static int stv06xx_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int err;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+	int err, packet_size;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
+	if (err < 0)
+		return err;
 
 	/* Prepare the sensor for start */
 	err = sd->sensor->start(sd);
@@ -282,6 +296,43 @@ out:
 	return (err < 0) ? err : 0;
 }
 
+static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct usb_host_interface *alt;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	alt->endpoint[0].desc.wMaxPacketSize =
+		cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
+
+	return 0;
+}
+
+static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev)
+{
+	int ret, packet_size, min_packet_size;
+	struct usb_host_interface *alt;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
+	if (packet_size <= min_packet_size)
+		return -EIO;
+
+	packet_size -= 100;
+	if (packet_size < min_packet_size)
+		packet_size = min_packet_size;
+	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size);
+
+	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
+	if (ret < 0)
+		PDEBUG(D_ERR|D_STREAM, "set alt 1 err %d", ret);
+
+	return ret;
+}
+
 static void stv06xx_stopN(struct gspca_dev *gspca_dev)
 {
 	int err;
@@ -462,6 +513,8 @@ static const struct sd_desc sd_desc = {
 	.start = stv06xx_start,
 	.stopN = stv06xx_stopN,
 	.pkt_scan = stv06xx_pkt_scan,
+	.isoc_init = stv06xx_isoc_init,
+	.isoc_nego = stv06xx_isoc_nego,
 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
 	.int_pkt_scan = sd_int_pkt_scan,
 #endif
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
index cf3d0ccc1121..b538dce96f78 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
@@ -146,6 +146,11 @@ const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = {
 	.i2c_addr = (0x55 << 1),
 	.i2c_len = 1,
 
+	/* FIXME (see if we can lower min_packet_size, needs testing, and also
+	   adjusting framerate when the bandwidth gets lower) */
+	.min_packet_size = { 847 },
+	.max_packet_size = { 847 },
+
 	.init = hdcs_init,
 	.probe = hdcs_probe_1x00,
 	.start = hdcs_start,
@@ -160,6 +165,11 @@ const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = {
 	.i2c_addr = (0x55 << 1),
 	.i2c_len = 1,
 
+	/* FIXME (see if we can lower min_packet_size, needs testing, and also
+	   adjusting framerate when the bandwidthm gets lower) */
+	.min_packet_size = { 847 },
+	.max_packet_size = { 847 },
+
 	.init = hdcs_init,
 	.probe = hdcs_probe_1020,
 	.start = hdcs_start,
@@ -177,7 +187,6 @@ static const u16 stv_bridge_init[][2] = {
 	{STV_REG04, 0x07},
 
 	{STV_SCAN_RATE, 0x20},
-	{STV_ISO_SIZE_L, 847},
 	{STV_Y_CTRL, 0x01},
 	{STV_X_CTRL, 0x0a}
 };
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
index 285221e6b390..ac47b4c94388 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
@@ -208,11 +208,24 @@ static int pb0100_probe(struct sd *sd)
 
 static int pb0100_start(struct sd *sd)
 {
-	int err;
+	int err, packet_size, max_packet_size;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
 	struct cam *cam = &sd->gspca_dev.cam;
 	s32 *sensor_settings = sd->sensor_priv;
 	u32 mode = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
 
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+
+	/* If we don't have enough bandwidth use a lower framerate */
+	max_packet_size = sd->sensor->max_packet_size[sd->gspca_dev.curr_mode];
+	if (packet_size < max_packet_size)
+		stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1));
+	else
+		stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(5)|BIT(3)|BIT(1));
+
 	/* Setup sensor window */
 	if (mode & PB0100_CROP_TO_VGA) {
 		stv06xx_write_sensor(sd, PB_RSTART, 30);
@@ -328,9 +341,6 @@ static int pb0100_init(struct sd *sd)
 	stv06xx_write_bridge(sd, STV_REG03, 0x45);
 	stv06xx_write_bridge(sd, STV_REG04, 0x07);
 
-	/* ISO-Size (0x27b: 635... why? - HDCS uses 847) */
-	stv06xx_write_bridge(sd, STV_ISO_SIZE_L, 847);
-
 	/* Scan/timing for the sensor */
 	stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1));
 	stv06xx_write_sensor(sd, PB_CFILLIN, 14);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
index 4de4fa5ebc57..757de246dc75 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
@@ -138,6 +138,9 @@ const struct stv06xx_sensor stv06xx_sensor_pb0100 = {
 	.i2c_addr = 0xba,
 	.i2c_len = 2,
 
+	.min_packet_size = { 635, 847 },
+	.max_packet_size = { 847, 923 },
+
 	.init = pb0100_init,
 	.probe = pb0100_probe,
 	.start = pb0100_start,
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
index 934b9cebc1ab..fb229d8ded58 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
@@ -53,6 +53,10 @@ struct stv06xx_sensor {
 	/* length of an i2c word */
 	u8 i2c_len;
 
+	/* Isoc packet size (per mode) */
+	int min_packet_size[4];
+	int max_packet_size[4];
+
 	/* Probes if the sensor is connected */
 	int (*probe)(struct sd *sd);
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index ea677b5d071e..42f3a1e41188 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -213,7 +213,6 @@ static int st6422_init(struct sd *sd)
 		{ 0x150e, 0x8e },
 		{ 0x150f, 0x37 },
 		{ 0x15c0, 0x00 },
-		{ 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */
 		{ 0x15c3, 0x08 },	/* 0x04/0x14 ... test pictures ??? */
 
 
@@ -237,23 +236,9 @@ static void st6422_disconnect(struct sd *sd)
 
 static int st6422_start(struct sd *sd)
 {
-	int err, packet_size;
+	int err;
 	struct cam *cam = &sd->gspca_dev.cam;
 	s32 *sensor_settings = sd->sensor_priv;
-	struct usb_host_interface *alt;
-	struct usb_interface *intf;
-
-	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
-	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
-	if (!alt) {
-		err("Couldn't get altsetting");
-		return -EIO;
-	}
-
-	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
-	err = stv06xx_write_bridge(sd, 0x15c1, packet_size);
-	if (err < 0)
-		return err;
 
 	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
 		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
index b2d45fe50522..12608aebe50b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -49,6 +49,9 @@ static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
 
 const struct stv06xx_sensor stv06xx_sensor_st6422 = {
 	.name = "ST6422",
+	/* No known way to lower framerate in case of less bandwidth */
+	.min_packet_size = { 300, 847 },
+	.max_packet_size = { 300, 847 },
 	.init = st6422_init,
 	.probe = st6422_probe,
 	.start = st6422_start,
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index b3b5508473bc..7fe3587f5f71 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -197,6 +197,10 @@ const struct stv06xx_sensor stv06xx_sensor_vv6410 = {
 	.i2c_flush = 5,
 	.i2c_addr = 0x20,
 	.i2c_len = 1,
+	/* FIXME (see if we can lower packet_size-s, needs testing, and also
+	   adjusting framerate when the bandwidth gets lower) */
+	.min_packet_size = { 1023 },
+	.max_packet_size = { 1023 },
 	.init = vv6410_init,
 	.probe = vv6410_probe,
 	.start = vv6410_start,
@@ -220,10 +224,6 @@ static const u8 x1536[] = {	/* 0x1536 - 0x153b */
 	0x02, 0x00, 0x60, 0x01, 0x20, 0x01
 };
 
-static const u8 x15c1[] = {	/* 0x15c1 - 0x15c2 */
-	0xff, 0x03 /* Output word 0x03ff = 1023 (ISO size) */
-};
-
 static const struct stv_init stv_bridge_init[] = {
 	/* This reg is written twice. Some kind of reset? */
 	{NULL,  0x1620, 0x80},
@@ -232,7 +232,6 @@ static const struct stv_init stv_bridge_init[] = {
 	{NULL,  0x1423, 0x04},
 	{x1500, 0x1500, ARRAY_SIZE(x1500)},
 	{x1536, 0x1536, ARRAY_SIZE(x1536)},
-	{x15c1, 0x15c1, ARRAY_SIZE(x15c1)}
 };
 
 static const u8 vv6410_sensor_init[][2] = {
-- 
cgit v1.2.3


From 14653e64e9db48e91cbd00fba335a6a459e66cc9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 11 Nov 2010 06:17:01 -0300
Subject: [media] gspca - ov519: Handle the snapshot on capture stop when
 CONFIG_INPUT=m
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 19f943e45ca2..7e86faf12f5b 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -3940,7 +3940,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	if (sd->bridge == BRIDGE_W9968CF)
 		w9968cf_stop0(sd);
 
-#ifdef CONFIG_INPUT
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
 	/* If the last button state is pressed, release it now! */
 	if (sd->snapshot_pressed) {
 		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
-- 
cgit v1.2.3


From d65174c06f2bf4ff73d1c71960be317b89561c06 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 11 Nov 2010 06:20:42 -0300
Subject: [media] gspca - ov519: Don't do USB exchanges after disconnection
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c   | 2 ++
 drivers/media/video/gspca/w996Xcf.c | 6 ++----
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 7e86faf12f5b..ed70229b0276 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -3937,6 +3937,8 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (!sd->gspca_dev.present)
+		return;
 	if (sd->bridge == BRIDGE_W9968CF)
 		w9968cf_stop0(sd);
 
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 4066ac8c45a0..b5a93e379570 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -549,10 +549,8 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 
 static void w9968cf_stop0(struct sd *sd)
 {
-	if (sd->gspca_dev.present) {
-		reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
-		reg_w(sd, 0x16, 0x0000); /* stop video capture */
-	}
+	reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
+	reg_w(sd, 0x16, 0x0000); /* stop video capture */
 }
 
 /* The w9968cf docs say that a 0 sized packet means EOF (and also SOF
-- 
cgit v1.2.3


From 9d1593a84c09e57a9565baab931a6cf116120e05 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 11 Nov 2010 08:04:06 -0300
Subject: [media] gspca - ov519: Change types '__xx' to 'xx'
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c   | 82 ++++++++++++++++++-------------------
 drivers/media/video/gspca/w996Xcf.c |  2 +-
 2 files changed, 42 insertions(+), 42 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index ed70229b0276..8355c63ad55b 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -75,7 +75,7 @@ struct sd {
 
 	struct gspca_ctrl ctrls[NCTRL];
 
-	__u8 packet_nr;
+	u8 packet_nr;
 
 	char bridge;
 #define BRIDGE_OV511		0
@@ -94,20 +94,20 @@ struct sd {
 	char snapshot_needs_reset;
 
 	/* Determined by sensor type */
-	__u8 sif;
+	u8 sif;
 
-	__u8 quality;
+	u8 quality;
 #define QUALITY_MIN 50
 #define QUALITY_MAX 70
 #define QUALITY_DEF 50
 
-	__u8 stopped;		/* Streaming is temporarily paused */
-	__u8 first_frame;
+	u8 stopped;		/* Streaming is temporarily paused */
+	u8 first_frame;
 
-	__u8 frame_rate;	/* current Framerate */
-	__u8 clockdiv;		/* clockdiv override */
+	u8 frame_rate;		/* current Framerate */
+	u8 clockdiv;		/* clockdiv override */
 
-	char sensor;		/* Type of image sensor chip (SEN_*) */
+	u8 sensor;		/* Type of image sensor chip (SEN_*) */
 #define SEN_UNKNOWN 0
 #define SEN_OV2610 1
 #define SEN_OV3610 2
@@ -594,12 +594,12 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
 
 struct ov_regvals {
-	__u8 reg;
-	__u8 val;
+	u8 reg;
+	u8 val;
 };
 struct ov_i2c_regvals {
-	__u8 reg;
-	__u8 val;
+	u8 reg;
+	u8 val;
 };
 
 /* Settings for OV2610 camera chip */
@@ -1825,7 +1825,7 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 }
 
 /* Write a OV519 register */
-static int reg_w(struct sd *sd, __u16 index, __u16 value)
+static int reg_w(struct sd *sd, u16 index, u16 value)
 {
 	int ret, req = 0;
 
@@ -1868,7 +1868,7 @@ leave:
 
 /* Read from a OV519 register, note not valid for the w9968cf!! */
 /* returns: negative is error, pos or zero is data */
-static int reg_r(struct sd *sd, __u16 index)
+static int reg_r(struct sd *sd, u16 index)
 {
 	int ret;
 	int req;
@@ -1902,7 +1902,7 @@ static int reg_r(struct sd *sd, __u16 index)
 
 /* Read 8 values from a OV519 register */
 static int reg_r8(struct sd *sd,
-		  __u16 index)
+		  u16 index)
 {
 	int ret;
 
@@ -1927,12 +1927,12 @@ static int reg_r8(struct sd *sd,
  * of their respective state in "value".
  */
 static int reg_w_mask(struct sd *sd,
-			__u16 index,
-			__u8 value,
-			__u8 mask)
+			u16 index,
+			u8 value,
+			u8 mask)
 {
 	int ret;
-	__u8 oldval;
+	u8 oldval;
 
 	if (mask != 0xff) {
 		value &= mask;			/* Enforce mask on value */
@@ -1950,7 +1950,7 @@ static int reg_w_mask(struct sd *sd,
  * Writes multiple (n) byte value to a single register. Only valid with certain
  * registers (0x30 and 0xc4 - 0xce).
  */
-static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
+static int ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
 {
 	int ret;
 
@@ -1970,7 +1970,7 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
 	return 0;
 }
 
-static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static int ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int rc, retries;
 
@@ -2011,7 +2011,7 @@ static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
 	return 0;
 }
 
-static int ov511_i2c_r(struct sd *sd, __u8 reg)
+static int ov511_i2c_r(struct sd *sd, u8 reg)
 {
 	int rc, value, retries;
 
@@ -2092,8 +2092,8 @@ static int ov511_i2c_r(struct sd *sd, __u8 reg)
  * always succeeds regardless of whether the sensor is present and working.
  */
 static int ov518_i2c_w(struct sd *sd,
-		__u8 reg,
-		__u8 value)
+		u8 reg,
+		u8 value)
 {
 	int rc;
 
@@ -2126,7 +2126,7 @@ static int ov518_i2c_w(struct sd *sd,
  * This is normally only called from i2c_r(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int ov518_i2c_r(struct sd *sd, __u8 reg)
+static int ov518_i2c_r(struct sd *sd, u8 reg)
 {
 	int rc, value;
 
@@ -2149,7 +2149,7 @@ static int ov518_i2c_r(struct sd *sd, __u8 reg)
 	return value;
 }
 
-static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static int ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int ret;
 
@@ -2157,7 +2157,7 @@ static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
 			0x02,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			(__u16)value, (__u16)reg, NULL, 0, 500);
+			(u16) value, (u16) reg, NULL, 0, 500);
 
 	if (ret < 0) {
 		err("i2c 0x%02x -> [0x%02x] failed", value, reg);
@@ -2168,7 +2168,7 @@ static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
 	return 0;
 }
 
-static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
+static int ovfx2_i2c_r(struct sd *sd, u8 reg)
 {
 	int ret;
 
@@ -2176,7 +2176,7 @@ static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
 			0x03,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0, (__u16)reg, sd->gspca_dev.usb_buf, 1, 500);
+			0, (u16) reg, sd->gspca_dev.usb_buf, 1, 500);
 
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
@@ -2187,7 +2187,7 @@ static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
 	return ret;
 }
 
-static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static int i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int ret = -1;
 
@@ -2224,7 +2224,7 @@ static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
 	return ret;
 }
 
-static int i2c_r(struct sd *sd, __u8 reg)
+static int i2c_r(struct sd *sd, u8 reg)
 {
 	int ret = -1;
 
@@ -2261,12 +2261,12 @@ static int i2c_r(struct sd *sd, __u8 reg)
  * of their respective state in "value".
  */
 static int i2c_w_mask(struct sd *sd,
-		   __u8 reg,
-		   __u8 value,
-		   __u8 mask)
+			u8 reg,
+			u8 value,
+			u8 mask)
 {
 	int rc;
-	__u8 oldval;
+	u8 oldval;
 
 	value &= mask;			/* Enforce mask on value */
 	rc = i2c_r(sd, reg);
@@ -2334,12 +2334,12 @@ static inline int ov51x_restart(struct sd *sd)
 	return 0;
 }
 
-static int ov51x_set_slave_ids(struct sd *sd, __u8 slave);
+static int ov51x_set_slave_ids(struct sd *sd, u8 slave);
 
 /* This does an initial reset of an OmniVision sensor and ensures that I2C
  * is synchronized. Returns <0 on failure.
  */
-static int init_ov_sensor(struct sd *sd, __u8 slave)
+static int init_ov_sensor(struct sd *sd, u8 slave)
 {
 	int i;
 
@@ -2378,7 +2378,7 @@ static int init_ov_sensor(struct sd *sd, __u8 slave)
  * Sets I2C read and write slave IDs. Returns <0 for error
  */
 static int ov51x_set_slave_ids(struct sd *sd,
-				__u8 slave)
+				u8 slave)
 {
 	int rc;
 
@@ -3601,7 +3601,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
 	int qvga, xstart, xend, ystart, yend;
-	__u8 v;
+	u8 v;
 
 	gspca_dev = &sd->gspca_dev;
 	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
@@ -4213,7 +4213,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
 		break;
 	case SEN_OV8610: {
-		static const __u8 ctab[] = {
+		static const u8 ctab[] = {
 			0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f
 		};
 
@@ -4223,7 +4223,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	    }
 	case SEN_OV7620:
 	case SEN_OV7620AE: {
-		static const __u8 ctab[] = {
+		static const u8 ctab[] = {
 			0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
 			0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
 		};
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index b5a93e379570..5d7342089e47 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -59,7 +59,7 @@ static const struct v4l2_pix_format w9968cf_vga_mode[] = {
 		.colorspace = V4L2_COLORSPACE_JPEG},
 };
 
-static int reg_w(struct sd *sd, __u16 index, __u16 value);
+static int reg_w(struct sd *sd, u16 index, u16 value);
 
 /*--------------------------------------------------------------------------
   Write 64-bit data to the fast serial bus registers.
-- 
cgit v1.2.3


From d6fa66384b38165126ce2866b4bdff756c6fc761 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 11 Nov 2010 08:05:50 -0300
Subject: [media] gspca - ov519: Reduce the size of some variables
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 8355c63ad55b..d73e1c75541b 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -124,9 +124,9 @@ struct sd {
 #define SEN_OV8610 13
 
 	u8 sensor_addr;
-	int sensor_width;
-	int sensor_height;
-	int sensor_reg_cache[256];
+	u16 sensor_width;
+	u16 sensor_height;
+	s16 sensor_reg_cache[256];
 
 	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
-- 
cgit v1.2.3


From 7bbe6b8d1f63c2f7482c93d8cd986b1774e6436d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Thu, 11 Nov 2010 08:27:24 -0300
Subject: [media] gspca - ov519: Define the sensor types in an enum
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch also checks if the sensor is well detected at connection time.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index d73e1c75541b..5da1a4e3737d 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -107,21 +107,7 @@ struct sd {
 	u8 frame_rate;		/* current Framerate */
 	u8 clockdiv;		/* clockdiv override */
 
-	u8 sensor;		/* Type of image sensor chip (SEN_*) */
-#define SEN_UNKNOWN 0
-#define SEN_OV2610 1
-#define SEN_OV3610 2
-#define SEN_OV6620 3
-#define SEN_OV6630 4
-#define SEN_OV66308AF 5
-#define SEN_OV7610 6
-#define SEN_OV7620 7
-#define SEN_OV7620AE 8
-#define SEN_OV7640 9
-#define SEN_OV7648 10
-#define SEN_OV7670 11
-#define SEN_OV76BE 12
-#define SEN_OV8610 13
+	s8 sensor;		/* Type of image sensor chip (SEN_*) */
 
 	u8 sensor_addr;
 	u16 sensor_width;
@@ -130,6 +116,21 @@ struct sd {
 
 	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
+enum sensors {
+	SEN_OV2610,
+	SEN_OV3610,
+	SEN_OV6620,
+	SEN_OV6630,
+	SEN_OV66308AF,
+	SEN_OV7610,
+	SEN_OV7620,
+	SEN_OV7620AE,
+	SEN_OV7640,
+	SEN_OV7648,
+	SEN_OV7670,
+	SEN_OV76BE,
+	SEN_OV8610,
+};
 
 /* Note this is a bit of a hack, but the w9968cf driver needs the code for all
    the ov sensors which is already present here. When we have the time we
@@ -3010,6 +3011,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	/* The OV519 must be more aggressive about sensor detection since
 	 * I2C write will never fail if the sensor is not present. We have
 	 * to try to initialize the sensor to detect its presence */
+	sd->sensor = -1;
 
 	/* Test for 76xx */
 	if (init_ov_sensor(sd, OV7xx0_SID) >= 0) {
@@ -3040,6 +3042,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		goto error;
 	}
 
+	if (sd->sensor < 0)
+		goto error;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -3117,7 +3122,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
-	return -EBUSY;
+	return -EINVAL;
 }
 
 /* this function is called at probe and resume time */
-- 
cgit v1.2.3


From 9be1d6cde936dcf9a325eeee01ed64005c98d456 Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Fri, 12 Nov 2010 04:32:35 -0300
Subject: [media] gspca - cpia1: Fix error check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It looks to me like it was intended to check the return value
at this point.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/cpia1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
index 80b8dae5e619..c1ae05f4661f 100644
--- a/drivers/media/video/gspca/cpia1.c
+++ b/drivers/media/video/gspca/cpia1.c
@@ -829,7 +829,7 @@ static int goto_low_power(struct gspca_dev *gspca_dev)
 	if (ret)
 		return ret;
 
-	do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+	ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
 	if (ret)
 		return ret;
 
-- 
cgit v1.2.3


From 87bae740fd50df49337017b3ccbed9dbaeaad610 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 05:31:34 -0300
Subject: [media] gspca - ov519: Cleanup source
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

- move hexadecimal value to lowercase
- remove/add empty lines and spaces
- comment unused macros
- change some comments

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c   | 265 ++++++++++++++++++------------------
 drivers/media/video/gspca/w996Xcf.c |  27 ++--
 2 files changed, 143 insertions(+), 149 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 5da1a4e3737d..85fc4336b796 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -226,7 +226,7 @@ static const struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_MENU,
 		.name    = "Light frequency filter",
 		.minimum = 0,
-		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.maximum = 2,	/* 0: no flicker, 1: 50Hz, 2:60Hz, 3: auto */
 		.step    = 1,
 		.default_value = 0,
 	    },
@@ -413,7 +413,6 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 		.priv = 0},
 };
 
-
 /* Registers common to OV511 / OV518 */
 #define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
 #define R51x_SYS_RESET			0x50
@@ -421,7 +420,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 	#define	OV511_RESET_OMNICE	0x08
 #define R51x_SYS_INIT			0x53
 #define R51x_SYS_SNAP			0x52
-#define R51x_SYS_CUST_ID		0x5F
+#define R51x_SYS_CUST_ID		0x5f
 #define R51x_COMP_LUT_BEGIN		0x80
 
 /* OV511 Camera interface register numbers */
@@ -436,13 +435,13 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define R511_CAM_OPTS			0x18
 
 #define R511_SNAP_FRAME			0x19
-#define R511_SNAP_PXCNT			0x1A
-#define R511_SNAP_LNCNT			0x1B
-#define R511_SNAP_PXDIV			0x1C
-#define R511_SNAP_LNDIV			0x1D
-#define R511_SNAP_UV_EN			0x1E
-#define R511_SNAP_UV_EN			0x1E
-#define R511_SNAP_OPTS			0x1F
+#define R511_SNAP_PXCNT			0x1a
+#define R511_SNAP_LNCNT			0x1b
+#define R511_SNAP_PXDIV			0x1c
+#define R511_SNAP_LNDIV			0x1d
+#define R511_SNAP_UV_EN			0x1e
+#define R511_SNAP_UV_EN			0x1e
+#define R511_SNAP_OPTS			0x1f
 
 #define R511_DRAM_FLOW_CTL		0x20
 #define R511_FIFO_OPTS			0x31
@@ -467,13 +466,13 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV519_R25_FORMAT		0x25
 
 /* OV519 System Controller register numbers */
-#define OV519_SYS_RESET1 0x51
-#define OV519_SYS_EN_CLK1 0x54
+#define OV519_SYS_RESET1		0x51
+#define OV519_SYS_EN_CLK1		0x54
 
 #define OV519_GPIO_DATA_OUT0		0x71
 #define OV519_GPIO_IO_CTRL0		0x72
 
-#define OV511_ENDPOINT_ADDRESS  1	/* Isoc endpoint number */
+/*#define OV511_ENDPOINT_ADDRESS 1	 * Isoc endpoint number */
 
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
@@ -528,71 +527,71 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV7610_REG_COM_I	0x29	/* misc settings */
 
 /* OV7670 registers */
-#define OV7670_REG_GAIN        0x00    /* Gain lower 8 bits (rest in vref) */
-#define OV7670_REG_BLUE        0x01    /* blue gain */
-#define OV7670_REG_RED         0x02    /* red gain */
-#define OV7670_REG_VREF        0x03    /* Pieces of GAIN, VSTART, VSTOP */
-#define OV7670_REG_COM1        0x04    /* Control 1 */
-#define OV7670_REG_AECHH       0x07    /* AEC MS 5 bits */
-#define OV7670_REG_COM3        0x0c    /* Control 3 */
-#define OV7670_REG_COM4        0x0d    /* Control 4 */
-#define OV7670_REG_COM5        0x0e    /* All "reserved" */
-#define OV7670_REG_COM6        0x0f    /* Control 6 */
-#define OV7670_REG_AECH        0x10    /* More bits of AEC value */
-#define OV7670_REG_CLKRC       0x11    /* Clock control */
-#define OV7670_REG_COM7        0x12    /* Control 7 */
-#define   OV7670_COM7_FMT_VGA    0x00
-#define   OV7670_COM7_YUV        0x00    /* YUV */
-#define   OV7670_COM7_FMT_QVGA   0x10    /* QVGA format */
-#define   OV7670_COM7_FMT_MASK   0x38
-#define   OV7670_COM7_RESET      0x80    /* Register reset */
-#define OV7670_REG_COM8        0x13    /* Control 8 */
-#define   OV7670_COM8_AEC        0x01    /* Auto exposure enable */
-#define   OV7670_COM8_AWB        0x02    /* White balance enable */
-#define   OV7670_COM8_AGC        0x04    /* Auto gain enable */
-#define   OV7670_COM8_BFILT      0x20    /* Band filter enable */
-#define   OV7670_COM8_AECSTEP    0x40    /* Unlimited AEC step size */
-#define   OV7670_COM8_FASTAEC    0x80    /* Enable fast AGC/AEC */
-#define OV7670_REG_COM9        0x14    /* Control 9  - gain ceiling */
-#define OV7670_REG_COM10       0x15    /* Control 10 */
-#define OV7670_REG_HSTART      0x17    /* Horiz start high bits */
-#define OV7670_REG_HSTOP       0x18    /* Horiz stop high bits */
-#define OV7670_REG_VSTART      0x19    /* Vert start high bits */
-#define OV7670_REG_VSTOP       0x1a    /* Vert stop high bits */
-#define OV7670_REG_MVFP        0x1e    /* Mirror / vflip */
-#define   OV7670_MVFP_VFLIP	 0x10    /* vertical flip */
-#define   OV7670_MVFP_MIRROR     0x20    /* Mirror image */
-#define OV7670_REG_AEW         0x24    /* AGC upper limit */
-#define OV7670_REG_AEB         0x25    /* AGC lower limit */
-#define OV7670_REG_VPT         0x26    /* AGC/AEC fast mode op region */
-#define OV7670_REG_HREF        0x32    /* HREF pieces */
-#define OV7670_REG_TSLB        0x3a    /* lots of stuff */
-#define OV7670_REG_COM11       0x3b    /* Control 11 */
-#define   OV7670_COM11_EXP       0x02
-#define   OV7670_COM11_HZAUTO    0x10    /* Auto detect 50/60 Hz */
-#define OV7670_REG_COM12       0x3c    /* Control 12 */
-#define OV7670_REG_COM13       0x3d    /* Control 13 */
-#define   OV7670_COM13_GAMMA     0x80    /* Gamma enable */
-#define   OV7670_COM13_UVSAT     0x40    /* UV saturation auto adjustment */
-#define OV7670_REG_COM14       0x3e    /* Control 14 */
-#define OV7670_REG_EDGE        0x3f    /* Edge enhancement factor */
-#define OV7670_REG_COM15       0x40    /* Control 15 */
-#define   OV7670_COM15_R00FF     0xc0    /*            00 to FF */
-#define OV7670_REG_COM16       0x41    /* Control 16 */
-#define   OV7670_COM16_AWBGAIN   0x08    /* AWB gain enable */
-#define OV7670_REG_BRIGHT      0x55    /* Brightness */
-#define OV7670_REG_CONTRAS     0x56    /* Contrast control */
-#define OV7670_REG_GFIX        0x69    /* Fix gain control */
-#define OV7670_REG_RGB444      0x8c    /* RGB 444 control */
-#define OV7670_REG_HAECC1      0x9f    /* Hist AEC/AGC control 1 */
-#define OV7670_REG_HAECC2      0xa0    /* Hist AEC/AGC control 2 */
-#define OV7670_REG_BD50MAX     0xa5    /* 50hz banding step limit */
-#define OV7670_REG_HAECC3      0xa6    /* Hist AEC/AGC control 3 */
-#define OV7670_REG_HAECC4      0xa7    /* Hist AEC/AGC control 4 */
-#define OV7670_REG_HAECC5      0xa8    /* Hist AEC/AGC control 5 */
-#define OV7670_REG_HAECC6      0xa9    /* Hist AEC/AGC control 6 */
-#define OV7670_REG_HAECC7      0xaa    /* Hist AEC/AGC control 7 */
-#define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
+#define OV7670_REG_GAIN		0x00	/* Gain lower 8 bits (rest in vref) */
+#define OV7670_REG_BLUE		0x01	/* blue gain */
+#define OV7670_REG_RED		0x02	/* red gain */
+#define OV7670_REG_VREF		0x03	/* Pieces of GAIN, VSTART, VSTOP */
+#define OV7670_REG_COM1		0x04	/* Control 1 */
+/*#define OV7670_REG_AECHH	0x07	 * AEC MS 5 bits */
+#define OV7670_REG_COM3		0x0c	/* Control 3 */
+#define OV7670_REG_COM4		0x0d	/* Control 4 */
+#define OV7670_REG_COM5		0x0e	/* All "reserved" */
+#define OV7670_REG_COM6		0x0f	/* Control 6 */
+#define OV7670_REG_AECH		0x10	/* More bits of AEC value */
+#define OV7670_REG_CLKRC	0x11	/* Clock control */
+#define OV7670_REG_COM7		0x12	/* Control 7 */
+#define   OV7670_COM7_FMT_VGA	 0x00
+/*#define   OV7670_COM7_YUV	 0x00	 * YUV */
+#define   OV7670_COM7_FMT_QVGA	 0x10	/* QVGA format */
+#define   OV7670_COM7_FMT_MASK	 0x38
+#define   OV7670_COM7_RESET	 0x80	/* Register reset */
+#define OV7670_REG_COM8		0x13	/* Control 8 */
+#define   OV7670_COM8_AEC	 0x01	/* Auto exposure enable */
+#define   OV7670_COM8_AWB	 0x02	/* White balance enable */
+#define   OV7670_COM8_AGC	 0x04	/* Auto gain enable */
+#define   OV7670_COM8_BFILT	 0x20	/* Band filter enable */
+#define   OV7670_COM8_AECSTEP	 0x40	/* Unlimited AEC step size */
+#define   OV7670_COM8_FASTAEC	 0x80	/* Enable fast AGC/AEC */
+#define OV7670_REG_COM9		0x14	/* Control 9 - gain ceiling */
+#define OV7670_REG_COM10	0x15	/* Control 10 */
+#define OV7670_REG_HSTART	0x17	/* Horiz start high bits */
+#define OV7670_REG_HSTOP	0x18	/* Horiz stop high bits */
+#define OV7670_REG_VSTART	0x19	/* Vert start high bits */
+#define OV7670_REG_VSTOP	0x1a	/* Vert stop high bits */
+#define OV7670_REG_MVFP		0x1e	/* Mirror / vflip */
+#define   OV7670_MVFP_VFLIP	 0x10	/* vertical flip */
+#define   OV7670_MVFP_MIRROR	 0x20	/* Mirror image */
+#define OV7670_REG_AEW		0x24	/* AGC upper limit */
+#define OV7670_REG_AEB		0x25	/* AGC lower limit */
+#define OV7670_REG_VPT		0x26	/* AGC/AEC fast mode op region */
+#define OV7670_REG_HREF		0x32	/* HREF pieces */
+#define OV7670_REG_TSLB		0x3a	/* lots of stuff */
+#define OV7670_REG_COM11	0x3b	/* Control 11 */
+#define   OV7670_COM11_EXP	 0x02
+#define   OV7670_COM11_HZAUTO	 0x10	/* Auto detect 50/60 Hz */
+#define OV7670_REG_COM12	0x3c	/* Control 12 */
+#define OV7670_REG_COM13	0x3d	/* Control 13 */
+#define   OV7670_COM13_GAMMA	 0x80	/* Gamma enable */
+#define   OV7670_COM13_UVSAT	 0x40	/* UV saturation auto adjustment */
+#define OV7670_REG_COM14	0x3e	/* Control 14 */
+#define OV7670_REG_EDGE		0x3f	/* Edge enhancement factor */
+#define OV7670_REG_COM15	0x40	/* Control 15 */
+/*#define   OV7670_COM15_R00FF	 0xc0	 *	00 to FF */
+#define OV7670_REG_COM16	0x41	/* Control 16 */
+#define   OV7670_COM16_AWBGAIN	 0x08	/* AWB gain enable */
+#define OV7670_REG_BRIGHT	0x55	/* Brightness */
+#define OV7670_REG_CONTRAS	0x56	/* Contrast control */
+#define OV7670_REG_GFIX		0x69	/* Fix gain control */
+#define OV7670_REG_RGB444	0x8c	/* RGB 444 control */
+#define OV7670_REG_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
+#define OV7670_REG_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
+#define OV7670_REG_BD50MAX	0xa5	/* 50hz banding step limit */
+#define OV7670_REG_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
+#define OV7670_REG_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
+#define OV7670_REG_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
+#define OV7670_REG_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
+#define OV7670_REG_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
+#define OV7670_REG_BD60MAX	0xab	/* 60hz banding step limit */
 
 struct ov_regvals {
 	u8 reg;
@@ -618,7 +617,6 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 * "wait 4096 external clock ... to make sure the sensor is
 	 * stable and ready to access registers" i.e. 160us at 24MHz
 	 */
-
 	{ 0x12, 0x80 }, /* COMH reset */
 	{ 0x12, 0x00 }, /* QXGA, master */
 
@@ -651,7 +649,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMI[0] "Exposure control"
 	 *                  =   0 (0x00) .......0 "Manual"
 	 */
-	{ 0x13, 0xC0 },
+	{ 0x13, 0xc0 },
 
 	/*
 	 * 09 COMC "Common Control C"
@@ -707,7 +705,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COME[0] "Auto zero circuit select"
 	 *                  =   1 (0x01) .......1 "On"
 	 */
-	{ 0x0d, 0xA1 },
+	{ 0x0d, 0xa1 },
 
 	/*
 	 * 0E COMF "Common Control F"
@@ -771,7 +769,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMJ[0] "Reserved"
 	 *                  =   0 (0x00) .......0
 	 */
-	{ 0x14, 0xC6 },
+	{ 0x14, 0xc6 },
 
 	/*
 	 * 15 COMK "Common Control K"
@@ -877,7 +875,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    FVOPT[7:0] "Range"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x3c, 0x1F },
+	{ 0x3c, 0x1f },
 
 	/*
 	 * 44 Undocumented  =   0 (0x00) 00000000
@@ -926,7 +924,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    48[7:0] "It's a secret"
 	 *                  = 192 (0xC0) 11000000
 	 */
-	{ 0x48, 0xC0 },
+	{ 0x48, 0xc0 },
 
 	/*
 	 * 49 Undocumented  =  25 (0x19) 00011001
@@ -940,18 +938,18 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    4B[7:0] "It's a secret"
 	 *                  = 128 (0x80) 10000000
 	 */
-	{ 0x4B, 0x80 },
+	{ 0x4b, 0x80 },
 
 	/*
 	 * 4D Undocumented  = 196 (0xC4) 11000100
 	 *    4D[7:0] "It's a secret"
 	 *                  = 196 (0xC4) 11000100
 	 */
-	{ 0x4D, 0xC4 },
+	{ 0x4d, 0xc4 },
 
 	/*
 	 * 35 VREF "Reference Voltage Control"
-	 *                  =  76 (0x4C) 01001100
+	 *                  =  76 (0x4c) 01001100
 	 *    VREF[7:5] "Column high reference control"
 	 *                  =   2 (0x02) 010..... "higher voltage"
 	 *    VREF[4:2] "Column low reference control"
@@ -959,21 +957,21 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    VREF[1:0] "Reserved"
 	 *                  =   0 (0x00) ......00
 	 */
-	{ 0x35, 0x4C },
+	{ 0x35, 0x4c },
 
 	/*
 	 * 3D Undocumented  =   0 (0x00) 00000000
 	 *    3D[7:0] "It's a secret"
 	 *                  =   0 (0x00) 00000000
 	 */
-	{ 0x3D, 0x00 },
+	{ 0x3d, 0x00 },
 
 	/*
 	 * 3E Undocumented  =   0 (0x00) 00000000
 	 *    3E[7:0] "It's a secret"
 	 *                  =   0 (0x00) 00000000
 	 */
-	{ 0x3E, 0x00 },
+	{ 0x3e, 0x00 },
 
 	/*
 	 * 3B FREFB "Internal Reference Adjustment"
@@ -1013,7 +1011,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    VBLM[3:0] "Sensor current control"
 	 *                  =  10 (0x0A) ....1010
 	 */
-	{ 0x34, 0x5A },
+	{ 0x34, 0x5a },
 
 	/*
 	 * 3B FREFB "Internal Reference Adjustment"
@@ -1079,7 +1077,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x17, 0x1F },
+	{ 0x17, 0x1f },
 
 	/*
 	 * 18 HREFEND "Horizontal window end"
@@ -1087,7 +1085,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
 	 *                  =  95 (0x5F) 01011111
 	 */
-	{ 0x18, 0x5F },
+	{ 0x18, 0x5f },
 
 	/*
 	 * 19 VSTRT "Vertical window start"
@@ -1127,7 +1125,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
 	 *                  =   2 (0x02) ......10
 	 */
-	{ 0x03, 0x4A },
+	{ 0x03, 0x4a },
 
 	/*
 	 * 11 CLKRC "Clock Rate Control"
@@ -1184,7 +1182,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x17, 0x1F },
+	{ 0x17, 0x1f },
 
 	/*
 	 * 18 HREFEND "Horizontal window end"
@@ -1192,7 +1190,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
 	 *                  =  95 (0x5F) 01011111
 	 */
-	{ 0x18, 0x5F },
+	{ 0x18, 0x5f },
 
 	/*
 	 * 19 VSTRT "Vertical window start"
@@ -1232,7 +1230,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
 	 *                  =   2 (0x02) ......10
 	 */
-	{ 0x03, 0x4A },
+	{ 0x03, 0x4a },
 
 	/*
 	 * 02 RED "Red Gain Control"
@@ -1242,7 +1240,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    RED[6:0] "Value"
 	 *                  =  47 (0x2F) .0101111
 	 */
-	{ 0x02, 0xAF },
+	{ 0x02, 0xaf },
 
 	/*
 	 * 2D ADDVSL "VSYNC Pulse Width"
@@ -1250,7 +1248,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    ADDVSL[7:0] "VSYNC pulse width, LSB"
 	 *                  = 210 (0xD2) 11010010
 	 */
-	{ 0x2d, 0xD2 },
+	{ 0x2d, 0xd2 },
 
 	/*
 	 * 00 GAIN          =  24 (0x18) 00011000
@@ -1273,7 +1271,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    BLUE[6:0] "Value"
 	 *                  = 112 (0x70) .1110000
 	 */
-	{ 0x01, 0xF0 },
+	{ 0x01, 0xf0 },
 
 	/*
 	 * 10 AEC "Automatic Exposure Control"
@@ -1281,14 +1279,14 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    AEC[7:0] "Automatic Exposure Control, 8 MSBs"
 	 *                  =  10 (0x0A) 00001010
 	 */
-	{ 0x10, 0x0A },
-
-	{ 0xE1, 0x67 },
-	{ 0xE3, 0x03 },
-	{ 0xE4, 0x26 },
-	{ 0xE5, 0x3E },
-	{ 0xF8, 0x01 },
-	{ 0xFF, 0x01 },
+	{ 0x10, 0x0a },
+
+	{ 0xe1, 0x67 },
+	{ 0xe3, 0x03 },
+	{ 0xe4, 0x26 },
+	{ 0xe5, 0x3e },
+	{ 0xf8, 0x01 },
+	{ 0xff, 0x01 },
 };
 
 static const struct ov_i2c_regvals norm_6x20[] = {
@@ -1297,7 +1295,7 @@ static const struct ov_i2c_regvals norm_6x20[] = {
 	{ 0x03, 0x60 },
 	{ 0x05, 0x7f }, /* For when autoadjust is off */
 	{ 0x07, 0xa8 },
-	/* The ratio of 0x0c and 0x0d  controls the white point */
+	/* The ratio of 0x0c and 0x0d controls the white point */
 	{ 0x0c, 0x24 },
 	{ 0x0d, 0x24 },
 	{ 0x0f, 0x15 }, /* COMS */
@@ -2217,7 +2215,7 @@ static int i2c_w(struct sd *sd, u8 reg, u8 value)
 		/* Up on sensor reset empty the register cache */
 		if (reg == 0x12 && (value & 0x80))
 			memset(sd->sensor_reg_cache, -1,
-			       sizeof(sd->sensor_reg_cache));
+				sizeof(sd->sensor_reg_cache));
 		else
 			sd->sensor_reg_cache[reg] = value;
 	}
@@ -2366,6 +2364,7 @@ static int init_ov_sensor(struct sd *sd, u8 slave)
 			return -EIO;
 		/* Wait for it to initialize */
 		msleep(150);
+
 		/* Dummy read to sync I2C */
 		if (i2c_r(sd, 0x00) < 0)
 			return -EIO;
@@ -2457,7 +2456,7 @@ static int ov_hires_configure(struct sd *sd)
 		sd->sensor = SEN_OV3610;
 	} else {
 		err("Error unknown sensor type: 0x%02x%02x",
-		       high, low);
+			high, low);
 		return -1;
 	}
 
@@ -2499,7 +2498,6 @@ static int ov7xx0_configure(struct sd *sd)
 {
 	int rc, high, low;
 
-
 	PDEBUG(D_PROBE, "starting OV7xx0 configuration");
 
 	/* Detect sensor (sub)type */
@@ -2711,7 +2709,6 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 		6, 6, 6, 6, 7, 7, 7, 8,
 		7, 7, 6, 7, 7, 7, 8, 8
 	};
-
 	const unsigned char uvQuanTable518[] = {
 		6, 6, 6, 7, 7, 7, 7, 7,
 		6, 6, 6, 7, 7, 7, 7, 7,
@@ -2728,11 +2725,11 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 	if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
 		pYTable = yQuanTable511;
 		pUVTable = uvQuanTable511;
-		size  = 32;
+		size = 32;
 	} else {
 		pYTable = yQuanTable518;
 		pUVTable = uvQuanTable518;
-		size  = 16;
+		size = 16;
 	}
 
 	for (i = 0; i < size; i++) {
@@ -2893,7 +2890,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 
 	/* First 5 bits of custom ID reg are a revision ID on OV518 */
 	PDEBUG(D_PROBE, "Device revision %d",
-	       0x1F & reg_r(sd, R51x_SYS_CUST_ID));
+		0x1f & reg_r(sd, R51x_SYS_CUST_ID));
 
 	rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
 	if (rc < 0)
@@ -2933,18 +2930,18 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 static int ov519_configure(struct sd *sd)
 {
 	static const struct ov_regvals init_519[] = {
-		{ 0x5a,  0x6d }, /* EnableSystem */
-		{ 0x53,  0x9b },
-		{ 0x54,  0xff }, /* set bit2 to enable jpeg */
-		{ 0x5d,  0x03 },
-		{ 0x49,  0x01 },
-		{ 0x48,  0x00 },
+		{ 0x5a, 0x6d }, /* EnableSystem */
+		{ 0x53, 0x9b },
+		{ 0x54, 0xff }, /* set bit2 to enable jpeg */
+		{ 0x5d, 0x03 },
+		{ 0x49, 0x01 },
+		{ 0x48, 0x00 },
 		/* Set LED pin to output mode. Bit 4 must be cleared or sensor
 		 * detection will fail. This deserves further investigation. */
 		{ OV519_GPIO_IO_CTRL0,   0xee },
-		{ 0x51,  0x0f }, /* SetUsbInit */
-		{ 0x51,  0x00 },
-		{ 0x22,  0x00 },
+		{ 0x51, 0x0f }, /* SetUsbInit */
+		{ 0x51, 0x00 },
+		{ 0x22, 0x00 },
 		/* windows reads 0x55 at this point*/
 	};
 
@@ -3335,7 +3332,6 @@ static int ov518_mode_init_regs(struct sd *sd)
 	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
 	/******** Set the mode ********/
-
 	reg_w(sd, 0x2b, 0);
 	reg_w(sd, 0x2c, 0);
 	reg_w(sd, 0x2d, 0);
@@ -3369,7 +3365,7 @@ static int ov518_mode_init_regs(struct sd *sd)
 	/* Windows driver does this here; who knows why */
 	reg_w(sd, 0x2f, 0x80);
 
-	/******** Set the framerate  ********/
+	/******** Set the framerate ********/
 	sd->clockdiv = 1;
 
 	/* Mode independent, but framerate dependent, regs */
@@ -3436,7 +3432,6 @@ static int ov518_mode_init_regs(struct sd *sd)
 	return 0;
 }
 
-
 /* Sets up the OV519 with the given image parameters
  *
  * OV519 needs a completely different approach, until we can figure out what
@@ -3609,7 +3604,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 	u8 v;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -3777,8 +3772,8 @@ static int set_ov_sensor_window(struct sd *sd)
 		return mode_init_ov_sensor_regs(sd);
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
-	crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
+	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
+	crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
 
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
@@ -4458,14 +4453,14 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4064),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4068),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0155),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
 	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
 	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
@@ -4479,7 +4474,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 },
 	{USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 },
 	{USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF },
-	{USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 },
+	{USB_DEVICE(0x8020, 0xef04), .driver_info = BRIDGE_OVFX2 },
 	{}
 };
 
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 5d7342089e47..8bffde198a15 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -150,10 +150,10 @@ static int w9968cf_upload_quantizationtables(struct sd *sd)
 	ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
 
 	for (i = 0, j = 0; i < 32; i++, j += 2) {
-		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
-		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
-		ret += reg_w(sd, 0x40+i, a);
-		ret += reg_w(sd, 0x60+i, b);
+		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j + 1]) << 8);
+		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j + 1]) << 8);
+		reg_w(sd, 0x40 + i, a);
+		reg_w(sd, 0x60 + i, b);
 	}
 	ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
 
@@ -351,7 +351,6 @@ static int w9968cf_i2c_r(struct sd *sd, u8 reg)
 	return ret;
 }
 
-
 /*--------------------------------------------------------------------------
   Turn on the LED on some webcams. A beep should be heard too.
   Return 0 on success, a negative number otherwise.
@@ -381,11 +380,11 @@ static int w9968cf_init(struct sd *sd)
 	int ret = 0;
 	unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
 		      y0 = 0x0000,
-		      u0 = y0 + hw_bufsize/2,
-		      v0 = u0 + hw_bufsize/4,
-		      y1 = v0 + hw_bufsize/4,
-		      u1 = y1 + hw_bufsize/2,
-		      v1 = u1 + hw_bufsize/4;
+		      u0 = y0 + hw_bufsize / 2,
+		      v0 = u0 + hw_bufsize / 4,
+		      y1 = v0 + hw_bufsize / 4,
+		      u1 = y1 + hw_bufsize / 2,
+		      v1 = u1 + hw_bufsize / 4;
 
 	ret += reg_w(sd, 0x00, 0xff00); /* power off */
 	ret += reg_w(sd, 0x00, 0xbf10); /* power on */
@@ -456,8 +455,8 @@ static int w9968cf_set_crop_window(struct sd *sd)
 	fw = SC(sd->gspca_dev.width) / max_width;
 	fh = SC(sd->gspca_dev.height) / max_height;
 
-	cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width)/fh;
-	ch = (fw >= fh) ? SC(sd->gspca_dev.height)/fw : max_height;
+	cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width) / fh;
+	ch = (fw >= fh) ? SC(sd->gspca_dev.height) / fw : max_height;
 
 	sd->sensor_width = max_width;
 	sd->sensor_height = max_height;
@@ -489,8 +488,8 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 	/* Y & UV frame buffer strides (in WORD) */
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
-		ret += reg_w(sd, 0x2c, sd->gspca_dev.width/2);
-		ret += reg_w(sd, 0x2d, sd->gspca_dev.width/4);
+		ret += reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
+		ret += reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
 	} else
 		ret += reg_w(sd, 0x2c, sd->gspca_dev.width);
 
-- 
cgit v1.2.3


From 218678032589895f29f4ee01b9c330caaab44274 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 06:12:09 -0300
Subject: [media] gspca - ov519: Set their numbers in the ov519 and ov7670
 register names
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 246 +++++++++++++++++++-------------------
 1 file changed, 123 insertions(+), 123 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 85fc4336b796..519dec9774fd 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -466,8 +466,8 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV519_R25_FORMAT		0x25
 
 /* OV519 System Controller register numbers */
-#define OV519_SYS_RESET1		0x51
-#define OV519_SYS_EN_CLK1		0x54
+#define OV519_R51_RESET1		0x51
+#define OV519_R54_EN_CLK1		0x54
 
 #define OV519_GPIO_DATA_OUT0		0x71
 #define OV519_GPIO_IO_CTRL0		0x72
@@ -527,71 +527,71 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV7610_REG_COM_I	0x29	/* misc settings */
 
 /* OV7670 registers */
-#define OV7670_REG_GAIN		0x00	/* Gain lower 8 bits (rest in vref) */
-#define OV7670_REG_BLUE		0x01	/* blue gain */
-#define OV7670_REG_RED		0x02	/* red gain */
-#define OV7670_REG_VREF		0x03	/* Pieces of GAIN, VSTART, VSTOP */
-#define OV7670_REG_COM1		0x04	/* Control 1 */
-/*#define OV7670_REG_AECHH	0x07	 * AEC MS 5 bits */
-#define OV7670_REG_COM3		0x0c	/* Control 3 */
-#define OV7670_REG_COM4		0x0d	/* Control 4 */
-#define OV7670_REG_COM5		0x0e	/* All "reserved" */
-#define OV7670_REG_COM6		0x0f	/* Control 6 */
-#define OV7670_REG_AECH		0x10	/* More bits of AEC value */
-#define OV7670_REG_CLKRC	0x11	/* Clock control */
-#define OV7670_REG_COM7		0x12	/* Control 7 */
+#define OV7670_R00_GAIN		0x00	/* Gain lower 8 bits (rest in vref) */
+#define OV7670_R01_BLUE		0x01	/* blue gain */
+#define OV7670_R02_RED		0x02	/* red gain */
+#define OV7670_R03_VREF		0x03	/* Pieces of GAIN, VSTART, VSTOP */
+#define OV7670_R04_COM1		0x04	/* Control 1 */
+/*#define OV7670_R07_AECHH	0x07	 * AEC MS 5 bits */
+#define OV7670_R0C_COM3		0x0c	/* Control 3 */
+#define OV7670_R0D_COM4		0x0d	/* Control 4 */
+#define OV7670_R0E_COM5		0x0e	/* All "reserved" */
+#define OV7670_R0F_COM6		0x0f	/* Control 6 */
+#define OV7670_R10_AECH		0x10	/* More bits of AEC value */
+#define OV7670_R11_CLKRC	0x11	/* Clock control */
+#define OV7670_R12_COM7		0x12	/* Control 7 */
 #define   OV7670_COM7_FMT_VGA	 0x00
 /*#define   OV7670_COM7_YUV	 0x00	 * YUV */
 #define   OV7670_COM7_FMT_QVGA	 0x10	/* QVGA format */
 #define   OV7670_COM7_FMT_MASK	 0x38
 #define   OV7670_COM7_RESET	 0x80	/* Register reset */
-#define OV7670_REG_COM8		0x13	/* Control 8 */
+#define OV7670_R13_COM8		0x13	/* Control 8 */
 #define   OV7670_COM8_AEC	 0x01	/* Auto exposure enable */
 #define   OV7670_COM8_AWB	 0x02	/* White balance enable */
 #define   OV7670_COM8_AGC	 0x04	/* Auto gain enable */
 #define   OV7670_COM8_BFILT	 0x20	/* Band filter enable */
 #define   OV7670_COM8_AECSTEP	 0x40	/* Unlimited AEC step size */
 #define   OV7670_COM8_FASTAEC	 0x80	/* Enable fast AGC/AEC */
-#define OV7670_REG_COM9		0x14	/* Control 9 - gain ceiling */
-#define OV7670_REG_COM10	0x15	/* Control 10 */
-#define OV7670_REG_HSTART	0x17	/* Horiz start high bits */
-#define OV7670_REG_HSTOP	0x18	/* Horiz stop high bits */
-#define OV7670_REG_VSTART	0x19	/* Vert start high bits */
-#define OV7670_REG_VSTOP	0x1a	/* Vert stop high bits */
-#define OV7670_REG_MVFP		0x1e	/* Mirror / vflip */
+#define OV7670_R14_COM9		0x14	/* Control 9 - gain ceiling */
+#define OV7670_R15_COM10	0x15	/* Control 10 */
+#define OV7670_R17_HSTART	0x17	/* Horiz start high bits */
+#define OV7670_R18_HSTOP	0x18	/* Horiz stop high bits */
+#define OV7670_R19_VSTART	0x19	/* Vert start high bits */
+#define OV7670_R1A_VSTOP	0x1a	/* Vert stop high bits */
+#define OV7670_R1E_MVFP		0x1e	/* Mirror / vflip */
 #define   OV7670_MVFP_VFLIP	 0x10	/* vertical flip */
 #define   OV7670_MVFP_MIRROR	 0x20	/* Mirror image */
-#define OV7670_REG_AEW		0x24	/* AGC upper limit */
-#define OV7670_REG_AEB		0x25	/* AGC lower limit */
-#define OV7670_REG_VPT		0x26	/* AGC/AEC fast mode op region */
-#define OV7670_REG_HREF		0x32	/* HREF pieces */
-#define OV7670_REG_TSLB		0x3a	/* lots of stuff */
-#define OV7670_REG_COM11	0x3b	/* Control 11 */
+#define OV7670_R24_AEW		0x24	/* AGC upper limit */
+#define OV7670_R25_AEB		0x25	/* AGC lower limit */
+#define OV7670_R26_VPT		0x26	/* AGC/AEC fast mode op region */
+#define OV7670_R32_HREF		0x32	/* HREF pieces */
+#define OV7670_R3A_TSLB		0x3a	/* lots of stuff */
+#define OV7670_R3B_COM11	0x3b	/* Control 11 */
 #define   OV7670_COM11_EXP	 0x02
 #define   OV7670_COM11_HZAUTO	 0x10	/* Auto detect 50/60 Hz */
-#define OV7670_REG_COM12	0x3c	/* Control 12 */
-#define OV7670_REG_COM13	0x3d	/* Control 13 */
+#define OV7670_R3C_COM12	0x3c	/* Control 12 */
+#define OV7670_R3D_COM13	0x3d	/* Control 13 */
 #define   OV7670_COM13_GAMMA	 0x80	/* Gamma enable */
 #define   OV7670_COM13_UVSAT	 0x40	/* UV saturation auto adjustment */
-#define OV7670_REG_COM14	0x3e	/* Control 14 */
-#define OV7670_REG_EDGE		0x3f	/* Edge enhancement factor */
-#define OV7670_REG_COM15	0x40	/* Control 15 */
+#define OV7670_R3E_COM14	0x3e	/* Control 14 */
+#define OV7670_R3F_EDGE		0x3f	/* Edge enhancement factor */
+#define OV7670_R40_COM15	0x40	/* Control 15 */
 /*#define   OV7670_COM15_R00FF	 0xc0	 *	00 to FF */
-#define OV7670_REG_COM16	0x41	/* Control 16 */
+#define OV7670_R41_COM16	0x41	/* Control 16 */
 #define   OV7670_COM16_AWBGAIN	 0x08	/* AWB gain enable */
-#define OV7670_REG_BRIGHT	0x55	/* Brightness */
-#define OV7670_REG_CONTRAS	0x56	/* Contrast control */
-#define OV7670_REG_GFIX		0x69	/* Fix gain control */
-#define OV7670_REG_RGB444	0x8c	/* RGB 444 control */
-#define OV7670_REG_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
-#define OV7670_REG_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
-#define OV7670_REG_BD50MAX	0xa5	/* 50hz banding step limit */
-#define OV7670_REG_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
-#define OV7670_REG_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
-#define OV7670_REG_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
-#define OV7670_REG_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
-#define OV7670_REG_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
-#define OV7670_REG_BD60MAX	0xab	/* 60hz banding step limit */
+#define OV7670_R55_BRIGHT	0x55	/* Brightness */
+#define OV7670_R56_CONTRAS	0x56	/* Contrast control */
+#define OV7670_R69_GFIX		0x69	/* Fix gain control */
+/*#define OV7670_R8C_RGB444	0x8c	 * RGB 444 control */
+#define OV7670_R9F_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
+#define OV7670_RA0_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
+#define OV7670_RA5_BD50MAX	0xa5	/* 50hz banding step limit */
+#define OV7670_RA6_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
+#define OV7670_RA7_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
+#define OV7670_RA8_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
+#define OV7670_RA9_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
+#define OV7670_RAA_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
+#define OV7670_RAB_BD60MAX	0xab	/* 60hz banding step limit */
 
 struct ov_regvals {
 	u8 reg;
@@ -1463,7 +1463,7 @@ static const struct ov_i2c_regvals norm_7620[] = {
 	{ 0x00, 0x00 },		/* gain */
 	{ 0x01, 0x80 },		/* blue gain */
 	{ 0x02, 0x80 },		/* red gain */
-	{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
+	{ 0x03, 0xc0 },		/* OV7670_R03_VREF */
 	{ 0x06, 0x60 },
 	{ 0x07, 0x00 },
 	{ 0x0c, 0x24 },
@@ -1534,30 +1534,30 @@ static const struct ov_i2c_regvals norm_7640[] = {
 /* 7670. Defaults taken from OmniVision provided data,
 *  as provided by Jonathan Corbet of OLPC		*/
 static const struct ov_i2c_regvals norm_7670[] = {
-	{ OV7670_REG_COM7, OV7670_COM7_RESET },
-	{ OV7670_REG_TSLB, 0x04 },		/* OV */
-	{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
-	{ OV7670_REG_CLKRC, 0x01 },
+	{ OV7670_R12_COM7, OV7670_COM7_RESET },
+	{ OV7670_R3A_TSLB, 0x04 },		/* OV */
+	{ OV7670_R12_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+	{ OV7670_R11_CLKRC, 0x01 },
 /*
  * Set the hardware window.  These values from OV don't entirely
  * make sense - hstop is less than hstart.  But they work...
  */
-	{ OV7670_REG_HSTART, 0x13 },
-	{ OV7670_REG_HSTOP, 0x01 },
-	{ OV7670_REG_HREF, 0xb6 },
-	{ OV7670_REG_VSTART, 0x02 },
-	{ OV7670_REG_VSTOP, 0x7a },
-	{ OV7670_REG_VREF, 0x0a },
-
-	{ OV7670_REG_COM3, 0x00 },
-	{ OV7670_REG_COM14, 0x00 },
+	{ OV7670_R17_HSTART, 0x13 },
+	{ OV7670_R18_HSTOP, 0x01 },
+	{ OV7670_R32_HREF, 0xb6 },
+	{ OV7670_R19_VSTART, 0x02 },
+	{ OV7670_R1A_VSTOP, 0x7a },
+	{ OV7670_R03_VREF, 0x0a },
+
+	{ OV7670_R0C_COM3, 0x00 },
+	{ OV7670_R3E_COM14, 0x00 },
 /* Mystery scaling numbers */
 	{ 0x70, 0x3a },
 	{ 0x71, 0x35 },
 	{ 0x72, 0x11 },
 	{ 0x73, 0xf0 },
 	{ 0xa2, 0x02 },
-/*	{ OV7670_REG_COM10, 0x0 }, */
+/*	{ OV7670_R15_COM10, 0x0 }, */
 
 /* Gamma curve values */
 	{ 0x7a, 0x20 },
@@ -1579,37 +1579,37 @@ static const struct ov_i2c_regvals norm_7670[] = {
 
 /* AGC and AEC parameters.  Note we start by disabling those features,
    then turn them only after tweaking the values. */
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			 | OV7670_COM8_AECSTEP
 			 | OV7670_COM8_BFILT },
-	{ OV7670_REG_GAIN, 0x00 },
-	{ OV7670_REG_AECH, 0x00 },
-	{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
-	{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
-	{ OV7670_REG_BD50MAX, 0x05 },
-	{ OV7670_REG_BD60MAX, 0x07 },
-	{ OV7670_REG_AEW, 0x95 },
-	{ OV7670_REG_AEB, 0x33 },
-	{ OV7670_REG_VPT, 0xe3 },
-	{ OV7670_REG_HAECC1, 0x78 },
-	{ OV7670_REG_HAECC2, 0x68 },
+	{ OV7670_R00_GAIN, 0x00 },
+	{ OV7670_R10_AECH, 0x00 },
+	{ OV7670_R0D_COM4, 0x40 }, /* magic reserved bit */
+	{ OV7670_R14_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+	{ OV7670_RA5_BD50MAX, 0x05 },
+	{ OV7670_RAB_BD60MAX, 0x07 },
+	{ OV7670_R24_AEW, 0x95 },
+	{ OV7670_R25_AEB, 0x33 },
+	{ OV7670_R26_VPT, 0xe3 },
+	{ OV7670_R9F_HAECC1, 0x78 },
+	{ OV7670_RA0_HAECC2, 0x68 },
 	{ 0xa1, 0x03 }, /* magic */
-	{ OV7670_REG_HAECC3, 0xd8 },
-	{ OV7670_REG_HAECC4, 0xd8 },
-	{ OV7670_REG_HAECC5, 0xf0 },
-	{ OV7670_REG_HAECC6, 0x90 },
-	{ OV7670_REG_HAECC7, 0x94 },
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_RA6_HAECC3, 0xd8 },
+	{ OV7670_RA7_HAECC4, 0xd8 },
+	{ OV7670_RA8_HAECC5, 0xf0 },
+	{ OV7670_RA9_HAECC6, 0x90 },
+	{ OV7670_RAA_HAECC7, 0x94 },
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			| OV7670_COM8_AECSTEP
 			| OV7670_COM8_BFILT
 			| OV7670_COM8_AGC
 			| OV7670_COM8_AEC },
 
 /* Almost all of these are magic "reserved" values.  */
-	{ OV7670_REG_COM5, 0x61 },
-	{ OV7670_REG_COM6, 0x4b },
+	{ OV7670_R0E_COM5, 0x61 },
+	{ OV7670_R0F_COM6, 0x4b },
 	{ 0x16, 0x02 },
-	{ OV7670_REG_MVFP, 0x07 },
+	{ OV7670_R1E_MVFP, 0x07 },
 	{ 0x21, 0x02 },
 	{ 0x22, 0x91 },
 	{ 0x29, 0x07 },
@@ -1618,10 +1618,10 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x37, 0x1d },
 	{ 0x38, 0x71 },
 	{ 0x39, 0x2a },
-	{ OV7670_REG_COM12, 0x78 },
+	{ OV7670_R3C_COM12, 0x78 },
 	{ 0x4d, 0x40 },
 	{ 0x4e, 0x20 },
-	{ OV7670_REG_GFIX, 0x00 },
+	{ OV7670_R69_GFIX, 0x00 },
 	{ 0x6b, 0x4a },
 	{ 0x74, 0x10 },
 	{ 0x8d, 0x4f },
@@ -1656,9 +1656,9 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x6f, 0x9f },
 					/* "9e for advance AWB" */
 	{ 0x6a, 0x40 },
-	{ OV7670_REG_BLUE, 0x40 },
-	{ OV7670_REG_RED, 0x60 },
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_R01_BLUE, 0x40 },
+	{ OV7670_R02_RED, 0x60 },
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			| OV7670_COM8_AECSTEP
 			| OV7670_COM8_BFILT
 			| OV7670_COM8_AGC
@@ -1674,22 +1674,22 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x54, 0x80 },
 	{ 0x58, 0x9e },
 
-	{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
-	{ OV7670_REG_EDGE, 0x00 },
+	{ OV7670_R41_COM16, OV7670_COM16_AWBGAIN },
+	{ OV7670_R3F_EDGE, 0x00 },
 	{ 0x75, 0x05 },
 	{ 0x76, 0xe1 },
 	{ 0x4c, 0x00 },
 	{ 0x77, 0x01 },
-	{ OV7670_REG_COM13, OV7670_COM13_GAMMA
+	{ OV7670_R3D_COM13, OV7670_COM13_GAMMA
 			  | OV7670_COM13_UVSAT
 			  | 2},		/* was 3 */
 	{ 0x4b, 0x09 },
 	{ 0xc9, 0x60 },
-	{ OV7670_REG_COM16, 0x38 },
+	{ OV7670_R41_COM16, 0x38 },
 	{ 0x56, 0x40 },
 
 	{ 0x34, 0x11 },
-	{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+	{ OV7670_R3B_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
 	{ 0xa4, 0x88 },
 	{ 0x96, 0x00 },
 	{ 0x97, 0x30 },
@@ -2290,7 +2290,7 @@ static inline int ov51x_stop(struct sd *sd)
 	case BRIDGE_OV518PLUS:
 		return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+		return reg_w(sd, OV519_R51_RESET1, 0x0f);
 	case BRIDGE_OVFX2:
 		return reg_w_mask(sd, 0x0f, 0x00, 0x02);
 	case BRIDGE_W9968CF:
@@ -2323,7 +2323,7 @@ static inline int ov51x_restart(struct sd *sd)
 			return rc;
 		return reg_w(sd, R51x_SYS_RESET, 0x00);
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_SYS_RESET1, 0x00);
+		return reg_w(sd, OV519_R51_RESET1, 0x00);
 	case BRIDGE_OVFX2:
 		return reg_w_mask(sd, 0x0f, 0x02, 0x02);
 	case BRIDGE_W9968CF:
@@ -2932,15 +2932,15 @@ static int ov519_configure(struct sd *sd)
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a, 0x6d }, /* EnableSystem */
 		{ 0x53, 0x9b },
-		{ 0x54, 0xff }, /* set bit2 to enable jpeg */
+		{ OV519_R54_EN_CLK1, 0xff }, /* set bit2 to enable jpeg */
 		{ 0x5d, 0x03 },
 		{ 0x49, 0x01 },
 		{ 0x48, 0x00 },
 		/* Set LED pin to output mode. Bit 4 must be cleared or sensor
 		 * detection will fail. This deserves further investigation. */
 		{ OV519_GPIO_IO_CTRL0,   0xee },
-		{ 0x51, 0x0f }, /* SetUsbInit */
-		{ 0x51, 0x00 },
+		{ OV519_R51_RESET1, 0x0f },
+		{ OV519_R51_RESET1, 0x00 },
 		{ 0x22, 0x00 },
 		/* windows reads 0x55 at this point*/
 	};
@@ -3444,7 +3444,7 @@ static int ov519_mode_init_regs(struct sd *sd)
 	static const struct ov_regvals mode_init_519_ov7670[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
 		{ 0x53,	0x9f }, /* was 9b in 1.65-1.08 */
-		{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+		{ OV519_R54_EN_CLK1, 0x0f }, /* bit2 (jpeg enable) */
 		{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
 		{ 0xa3,	0x18 },
 		{ 0xa4,	0x04 },
@@ -3467,7 +3467,7 @@ static int ov519_mode_init_regs(struct sd *sd)
 	static const struct ov_regvals mode_init_519[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
 		{ 0x53,	0x9f }, /* was 9b in 1.65-1.08 */
-		{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+		{ OV519_R54_EN_CLK1, 0x0f }, /* bit2 (jpeg enable) */
 		{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
 		{ 0xa3,	0x18 },
 		{ 0xa4,	0x04 },
@@ -3687,11 +3687,11 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		/* set COM7_FMT_VGA or COM7_FMT_QVGA
 		 * do we need to set anything else?
 		 *	HSTART etc are set in set_ov_sensor_window itself */
-		i2c_w_mask(sd, OV7670_REG_COM7,
+		i2c_w_mask(sd, OV7670_R12_COM7,
 			 qvga ? OV7670_COM7_FMT_QVGA : OV7670_COM7_FMT_VGA,
 			 OV7670_COM7_FMT_MASK);
 		i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
-		i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB,
+		i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_AWB,
 				OV7670_COM8_AWB);
 		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
@@ -3707,21 +3707,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		}
 		/* OV7670 hardware window registers are split across
 		 * multiple locations */
-		i2c_w(sd, OV7670_REG_HSTART, xstart >> 3);
-		i2c_w(sd, OV7670_REG_HSTOP, xend >> 3);
-		v = i2c_r(sd, OV7670_REG_HREF);
+		i2c_w(sd, OV7670_R17_HSTART, xstart >> 3);
+		i2c_w(sd, OV7670_R18_HSTOP, xend >> 3);
+		v = i2c_r(sd, OV7670_R32_HREF);
 		v = (v & 0xc0) | ((xend & 0x7) << 3) | (xstart & 0x07);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
-		i2c_w(sd, OV7670_REG_HREF, v);
+		i2c_w(sd, OV7670_R32_HREF, v);
 
-		i2c_w(sd, OV7670_REG_VSTART, ystart >> 2);
-		i2c_w(sd, OV7670_REG_VSTOP, yend >> 2);
-		v = i2c_r(sd, OV7670_REG_VREF);
+		i2c_w(sd, OV7670_R19_VSTART, ystart >> 2);
+		i2c_w(sd, OV7670_R1A_VSTOP, yend >> 2);
+		v = i2c_r(sd, OV7670_R03_VREF);
 		v = (v & 0xc0) | ((yend & 0x3) << 2) | (ystart & 0x03);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
-		i2c_w(sd, OV7670_REG_VREF, v);
+		i2c_w(sd, OV7670_R03_VREF, v);
 		break;
 	case SEN_OV6620:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
@@ -3751,7 +3751,7 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 		return;
 	if (sd->gspca_dev.streaming)
 		ov51x_stop(sd);
-	i2c_w_mask(sd, OV7670_REG_MVFP,
+	i2c_w_mask(sd, OV7670_R1E_MVFP,
 		OV7670_MVFP_MIRROR * sd->ctrls[HFLIP].val
 			| OV7670_MVFP_VFLIP * sd->ctrls[VFLIP].val,
 		OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP);
@@ -4191,8 +4191,8 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		break;
 	case SEN_OV7670:
 /*win trace
- *		i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */
-		i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val));
+ *		i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_AEC); */
+		i2c_w(sd, OV7670_R55_BRIGHT, ov7670_abs_to_sm(val));
 		break;
 	}
 }
@@ -4234,7 +4234,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	    }
 	case SEN_OV7670:
 		/* check that this isn't just the same as ov7610 */
-		i2c_w(sd, OV7670_REG_CONTRAS, val >> 1);
+		i2c_w(sd, OV7670_R56_CONTRAS, val >> 1);
 		break;
 	}
 }
@@ -4294,22 +4294,22 @@ static void setfreq_i(struct sd *sd)
 	if (sd->sensor == SEN_OV7670) {
 		switch (sd->ctrls[FREQ].val) {
 		case 0: /* Banding filter disabled */
-			i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_BFILT);
 			break;
 		case 1: /* 50 hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18);
+			i2c_w_mask(sd, OV7670_R3B_COM11, 0x08, 0x18);
 			break;
 		case 2: /* 60 hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18);
+			i2c_w_mask(sd, OV7670_R3B_COM11, 0x00, 0x18);
 			break;
-		case 3: /* Auto hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+		case 3: /* Auto hz - ov7670 only */
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO,
+			i2c_w_mask(sd, OV7670_R3B_COM11, OV7670_COM11_HZAUTO,
 				   0x18);
 			break;
 		}
-- 
cgit v1.2.3


From 83db76886c0b0a32a0c8d35b4dc3dc1d8f1287d4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 07:14:08 -0300
Subject: [media] gspca - ov519: Define the disabled controls in a table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 62 +++++++++++++++++++++++++++++----------
 1 file changed, 47 insertions(+), 15 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 519dec9774fd..f6c62be00949 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -234,6 +234,51 @@ static const struct ctrl sd_ctrls[] = {
 	},
 };
 
+/* table of the disabled controls */
+static const unsigned ctrl_dis[] = {
+[SEN_OV2610] =		(1 << NCTRL) - 1,	/* no control */
+
+[SEN_OV3610] =		(1 << NCTRL) - 1,	/* no control */
+
+[SEN_OV6620] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV6630] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV66308AF] =	(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7610] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7620] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7620AE] =	(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7640] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << AUTOBRIGHT) |
+			(1 << CONTRAST),
+
+[SEN_OV7648] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << AUTOBRIGHT) |
+			(1 << CONTRAST),
+
+[SEN_OV7670] =		(1 << COLORS) |
+			(1 << AUTOBRIGHT),
+
+[SEN_OV76BE] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV8610] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << FREQ),
+};
+
 static const struct v4l2_pix_format ov519_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
@@ -3099,22 +3144,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		break;
 	}
 	gspca_dev->cam.ctrls = sd->ctrls;
-	if (sd->sensor == SEN_OV7670)
-		gspca_dev->ctrl_dis = 1 << COLORS;
-	else
-		gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP);
 	sd->quality = QUALITY_DEF;
-	if (sd->sensor == SEN_OV7640 ||
-	    sd->sensor == SEN_OV7648)
-		gspca_dev->ctrl_dis |= (1 << AUTOBRIGHT) | (1 << CONTRAST);
-	if (sd->sensor == SEN_OV7670)
-		gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT;
-	/* OV8610 Frequency filter control should work but needs testing */
-	if (sd->sensor == SEN_OV8610)
-		gspca_dev->ctrl_dis |= 1 << FREQ;
-	/* No controls for the OV2610/OV3610 */
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		gspca_dev->ctrl_dis |= (1 << NCTRL) - 1;
+
+	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
 
 	return 0;
 error:
-- 
cgit v1.2.3


From f8f20188e863dfb43ac53364da0b8865d37c97e2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 07:54:02 -0300
Subject: [media] gspca - ov519: Propagate errors to higher level
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c   | 536 ++++++++++++++----------------------
 drivers/media/video/gspca/w996Xcf.c | 282 +++++++++----------
 2 files changed, 327 insertions(+), 491 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index f6c62be00949..0591ced5d021 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -1869,10 +1869,13 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 }
 
 /* Write a OV519 register */
-static int reg_w(struct sd *sd, u16 index, u16 value)
+static void reg_w(struct sd *sd, u16 index, u16 value)
 {
 	int ret, req = 0;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -1903,11 +1906,11 @@ leave:
 	if (ret < 0) {
 		err("Write reg 0x%04x -> [0x%02x] failed",
 		       value, index);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
+		return;
 	}
 
 	PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
-	return 0;
 }
 
 /* Read from a OV519 register, note not valid for the w9968cf!! */
@@ -1917,6 +1920,9 @@ static int reg_r(struct sd *sd, u16 index)
 	int ret;
 	int req;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -1938,8 +1944,10 @@ static int reg_r(struct sd *sd, u16 index)
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
 		PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
-	} else
+	} else {
 		err("Read reg [0x%02x] failed", index);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
@@ -1950,16 +1958,21 @@ static int reg_r8(struct sd *sd,
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
 			1,			/* REQ_IO */
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index, sd->gspca_dev.usb_buf, 8, 500);
 
-	if (ret >= 0)
+	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-	else
+	} else {
 		err("Read reg 8 [0x%02x] failed", index);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
@@ -1970,7 +1983,7 @@ static int reg_r8(struct sd *sd,
  * that are in the same position as 0's in "mask" are preserved, regardless
  * of their respective state in "value".
  */
-static int reg_w_mask(struct sd *sd,
+static void reg_w_mask(struct sd *sd,
 			u16 index,
 			u8 value,
 			u8 mask)
@@ -1982,22 +1995,25 @@ static int reg_w_mask(struct sd *sd,
 		value &= mask;			/* Enforce mask on value */
 		ret = reg_r(sd, index);
 		if (ret < 0)
-			return ret;
+			return;
 
 		oldval = ret & ~mask;		/* Clear the masked bits */
 		value |= oldval;		/* Set the desired bits */
 	}
-	return reg_w(sd, index, value);
+	reg_w(sd, index, value);
 }
 
 /*
  * Writes multiple (n) byte value to a single register. Only valid with certain
  * registers (0x30 and 0xc4 - 0xce).
  */
-static int ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
+static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	*((__le32 *) sd->gspca_dev.usb_buf) = __cpu_to_le32(value);
 
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -2008,13 +2024,11 @@ static int ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
 			sd->gspca_dev.usb_buf, n, 500);
 	if (ret < 0) {
 		err("Write reg32 [%02x] %08x failed", index, value);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
-static int ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int rc, retries;
 
@@ -2023,36 +2037,28 @@ static int ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
 	/* Three byte write cycle */
 	for (retries = 6; ; ) {
 		/* Select camera register */
-		rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_SADDR_3, reg);
 
 		/* Write "value" to I2C data port of OV511 */
-		rc = reg_w(sd, R51x_I2C_DATA, value);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_DATA, value);
 
 		/* Initiate 3-byte write cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x01);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x01);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
 		} while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
 
 		if (rc < 0)
-			return rc;
+			return;
 
 		if ((rc & 2) == 0) /* Ack? */
 			break;
 		if (--retries < 0) {
 			PDEBUG(D_USBO, "i2c write retries exhausted");
-			return -1;
+			return;
 		}
 	}
-
-	return 0;
 }
 
 static int ov511_i2c_r(struct sd *sd, u8 reg)
@@ -2062,14 +2068,10 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
 	/* Two byte write cycle */
 	for (retries = 6; ; ) {
 		/* Select camera register */
-		rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_SADDR_2, reg);
 
 		/* Initiate 2-byte write cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x03);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x03);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
@@ -2093,9 +2095,7 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
 	/* Two byte read cycle */
 	for (retries = 6; ; ) {
 		/* Initiate 2-byte read cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x05);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x05);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
@@ -2108,9 +2108,7 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
 			break;
 
 		/* I2C abort */
-		rc = reg_w(sd, R511_I2C_CTL, 0x10);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x10);
 
 		if (--retries < 0) {
 			PDEBUG(D_USBI, "i2c read retries exhausted");
@@ -2123,9 +2121,7 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
 	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
 
 	/* This is needed to make i2c_w() work */
-	rc = reg_w(sd, R511_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R511_I2C_CTL, 0x05);
 
 	return value;
 }
@@ -2135,32 +2131,24 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int ov518_i2c_w(struct sd *sd,
+static void ov518_i2c_w(struct sd *sd,
 		u8 reg,
 		u8 value)
 {
-	int rc;
-
 	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
 
 	/* Select camera register */
-	rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_SADDR_3, reg);
 
 	/* Write "value" to I2C data port of OV511 */
-	rc = reg_w(sd, R51x_I2C_DATA, value);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_DATA, value);
 
 	/* Initiate 3-byte write cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x01);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x01);
 
 	/* wait for write complete */
 	msleep(4);
-	return reg_r8(sd, R518_I2C_CTL);
+	reg_r8(sd, R518_I2C_CTL);
 }
 
 /*
@@ -2172,31 +2160,28 @@ static int ov518_i2c_w(struct sd *sd,
  */
 static int ov518_i2c_r(struct sd *sd, u8 reg)
 {
-	int rc, value;
+	int value;
 
 	/* Select camera register */
-	rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_SADDR_2, reg);
 
 	/* Initiate 2-byte write cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x03);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x03);
 
 	/* Initiate 2-byte read cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x05);
 	value = reg_r(sd, R51x_I2C_DATA);
 	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
 	return value;
 }
 
-static int ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
 			0x02,
@@ -2205,17 +2190,19 @@ static int ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
 
 	if (ret < 0) {
 		err("i2c 0x%02x -> [0x%02x] failed", value, reg);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
 
 	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
-	return 0;
 }
 
 static int ovfx2_i2c_r(struct sd *sd, u8 reg)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
 			0x03,
@@ -2225,38 +2212,38 @@ static int ovfx2_i2c_r(struct sd *sd, u8 reg)
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
 		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret);
-	} else
+	} else {
 		err("i2c read [0x%02x] failed", reg);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
 
-static int i2c_w(struct sd *sd, u8 reg, u8 value)
+static void i2c_w(struct sd *sd, u8 reg, u8 value)
 {
-	int ret = -1;
-
 	if (sd->sensor_reg_cache[reg] == value)
-		return 0;
+		return;
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_i2c_w(sd, reg, value);
+		ov511_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 	case BRIDGE_OV519:
-		ret = ov518_i2c_w(sd, reg, value);
+		ov518_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_OVFX2:
-		ret = ovfx2_i2c_w(sd, reg, value);
+		ovfx2_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_W9968CF:
-		ret = w9968cf_i2c_w(sd, reg, value);
+		w9968cf_i2c_w(sd, reg, value);
 		break;
 	}
 
-	if (ret >= 0) {
+	if (sd->gspca_dev.usb_err >= 0) {
 		/* Up on sensor reset empty the register cache */
 		if (reg == 0x12 && (value & 0x80))
 			memset(sd->sensor_reg_cache, -1,
@@ -2264,8 +2251,6 @@ static int i2c_w(struct sd *sd, u8 reg, u8 value)
 		else
 			sd->sensor_reg_cache[reg] = value;
 	}
-
-	return ret;
 }
 
 static int i2c_r(struct sd *sd, u8 reg)
@@ -2304,7 +2289,7 @@ static int i2c_r(struct sd *sd, u8 reg)
  * that are in the same position as 0's in "mask" are preserved, regardless
  * of their respective state in "value".
  */
-static int i2c_w_mask(struct sd *sd,
+static void i2c_w_mask(struct sd *sd,
 			u8 reg,
 			u8 value,
 			u8 mask)
@@ -2315,70 +2300,72 @@ static int i2c_w_mask(struct sd *sd,
 	value &= mask;			/* Enforce mask on value */
 	rc = i2c_r(sd, reg);
 	if (rc < 0)
-		return rc;
+		return;
 	oldval = rc & ~mask;		/* Clear the masked bits */
 	value |= oldval;		/* Set the desired bits */
-	return i2c_w(sd, reg, value);
+	i2c_w(sd, reg, value);
 }
 
 /* Temporarily stops OV511 from functioning. Must do this before changing
  * registers while the camera is streaming */
-static inline int ov51x_stop(struct sd *sd)
+static inline void ov51x_stop(struct sd *sd)
 {
 	PDEBUG(D_STREAM, "stopping");
 	sd->stopped = 1;
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		return reg_w(sd, R51x_SYS_RESET, 0x3d);
+		reg_w(sd, R51x_SYS_RESET, 0x3d);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+		reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+		break;
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_R51_RESET1, 0x0f);
+		reg_w(sd, OV519_R51_RESET1, 0x0f);
+		break;
 	case BRIDGE_OVFX2:
-		return reg_w_mask(sd, 0x0f, 0x00, 0x02);
+		reg_w_mask(sd, 0x0f, 0x00, 0x02);
+		break;
 	case BRIDGE_W9968CF:
-		return reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+		reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+		break;
 	}
-
-	return 0;
 }
 
 /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
  * actually stopped (for performance). */
-static inline int ov51x_restart(struct sd *sd)
+static inline void ov51x_restart(struct sd *sd)
 {
-	int rc;
-
 	PDEBUG(D_STREAM, "restarting");
 	if (!sd->stopped)
-		return 0;
+		return;
 	sd->stopped = 0;
 
 	/* Reinitialize the stream */
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		return reg_w(sd, R51x_SYS_RESET, 0x00);
+		reg_w(sd, R51x_SYS_RESET, 0x00);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		rc = reg_w(sd, 0x2f, 0x80);
-		if (rc < 0)
-			return rc;
-		return reg_w(sd, R51x_SYS_RESET, 0x00);
+		reg_w(sd, 0x2f, 0x80);
+		reg_w(sd, R51x_SYS_RESET, 0x00);
+		break;
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_R51_RESET1, 0x00);
+		reg_w(sd, OV519_R51_RESET1, 0x00);
+		break;
 	case BRIDGE_OVFX2:
-		return reg_w_mask(sd, 0x0f, 0x02, 0x02);
+		reg_w_mask(sd, 0x0f, 0x02, 0x02);
+		break;
 	case BRIDGE_W9968CF:
-		return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+		reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+		break;
 	}
-
-	return 0;
 }
 
-static int ov51x_set_slave_ids(struct sd *sd, u8 slave);
+static void ov51x_set_slave_ids(struct sd *sd, u8 slave);
 
 /* This does an initial reset of an OmniVision sensor and ensures that I2C
  * is synchronized. Returns <0 on failure.
@@ -2387,12 +2374,10 @@ static int init_ov_sensor(struct sd *sd, u8 slave)
 {
 	int i;
 
-	if (ov51x_set_slave_ids(sd, slave) < 0)
-		return -EIO;
+	ov51x_set_slave_ids(sd, slave);
 
 	/* Reset the sensor */
-	if (i2c_w(sd, 0x12, 0x80) < 0)
-		return -EIO;
+	i2c_w(sd, 0x12, 0x80);
 
 	/* Wait for it to initialize */
 	msleep(150);
@@ -2405,16 +2390,16 @@ static int init_ov_sensor(struct sd *sd, u8 slave)
 		}
 
 		/* Reset the sensor */
-		if (i2c_w(sd, 0x12, 0x80) < 0)
-			return -EIO;
+		i2c_w(sd, 0x12, 0x80);
+
 		/* Wait for it to initialize */
 		msleep(150);
 
 		/* Dummy read to sync I2C */
 		if (i2c_r(sd, 0x00) < 0)
-			return -EIO;
+			return -1;
 	}
-	return -EIO;
+	return -1;
 }
 
 /* Set the read and write slave IDs. The "slave" argument is the write slave,
@@ -2422,53 +2407,40 @@ static int init_ov_sensor(struct sd *sd, u8 slave)
  * This should not be called from outside the i2c I/O functions.
  * Sets I2C read and write slave IDs. Returns <0 for error
  */
-static int ov51x_set_slave_ids(struct sd *sd,
+static void ov51x_set_slave_ids(struct sd *sd,
 				u8 slave)
 {
-	int rc;
-
 	switch (sd->bridge) {
 	case BRIDGE_OVFX2:
-		return reg_w(sd, OVFX2_I2C_ADDR, slave);
+		reg_w(sd, OVFX2_I2C_ADDR, slave);
+		return;
 	case BRIDGE_W9968CF:
 		sd->sensor_addr = slave;
-		return 0;
+		return;
 	}
 
-	rc = reg_w(sd, R51x_I2C_W_SID, slave);
-	if (rc < 0)
-		return rc;
-	return reg_w(sd, R51x_I2C_R_SID, slave + 1);
+	reg_w(sd, R51x_I2C_W_SID, slave);
+	reg_w(sd, R51x_I2C_R_SID, slave + 1);
 }
 
-static int write_regvals(struct sd *sd,
+static void write_regvals(struct sd *sd,
 			 const struct ov_regvals *regvals,
 			 int n)
 {
-	int rc;
-
 	while (--n >= 0) {
-		rc = reg_w(sd, regvals->reg, regvals->val);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, regvals->reg, regvals->val);
 		regvals++;
 	}
-	return 0;
 }
 
-static int write_i2c_regvals(struct sd *sd,
-			     const struct ov_i2c_regvals *regvals,
-			     int n)
+static void write_i2c_regvals(struct sd *sd,
+			const struct ov_i2c_regvals *regvals,
+			int n)
 {
-	int rc;
-
 	while (--n >= 0) {
-		rc = i2c_w(sd, regvals->reg, regvals->val);
-		if (rc < 0)
-			return rc;
+		i2c_w(sd, regvals->reg, regvals->val);
 		regvals++;
 	}
-	return 0;
 }
 
 /****************************************************************************
@@ -2478,13 +2450,13 @@ static int write_i2c_regvals(struct sd *sd,
  ***************************************************************************/
 
 /* This initializes the OV2x10 / OV3610 / OV3620 */
-static int ov_hires_configure(struct sd *sd)
+static void ov_hires_configure(struct sd *sd)
 {
 	int high, low;
 
 	if (sd->bridge != BRIDGE_OVFX2) {
 		err("error hires sensors only supported with ovfx2");
-		return -1;
+		return;
 	}
 
 	PDEBUG(D_PROBE, "starting ov hires configuration");
@@ -2502,18 +2474,13 @@ static int ov_hires_configure(struct sd *sd)
 	} else {
 		err("Error unknown sensor type: 0x%02x%02x",
 			high, low);
-		return -1;
 	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
-
 /* This initializes the OV8110, OV8610 sensor. The OV8110 uses
  * the same register settings as the OV8610, since they are very similar.
  */
-static int ov8xx0_configure(struct sd *sd)
+static void ov8xx0_configure(struct sd *sd)
 {
 	int rc;
 
@@ -2523,23 +2490,18 @@ static int ov8xx0_configure(struct sd *sd)
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
-	if ((rc & 3) == 1) {
+	if ((rc & 3) == 1)
 		sd->sensor = SEN_OV8610;
-	} else {
+	else
 		err("Unknown image sensor version: %d", rc & 3);
-		return -1;
-	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
 /* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
  * the same register settings as the OV7610, since they are very similar.
  */
-static int ov7xx0_configure(struct sd *sd)
+static void ov7xx0_configure(struct sd *sd)
 {
 	int rc, high, low;
 
@@ -2552,7 +2514,7 @@ static int ov7xx0_configure(struct sd *sd)
 	 * it appears to be wrongly detected as a 7610 by default */
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
 	if ((rc & 3) == 3) {
 		/* quick hack to make OV7670s work */
@@ -2580,19 +2542,19 @@ static int ov7xx0_configure(struct sd *sd)
 		high = i2c_r(sd, 0x0a);
 		if (high < 0) {
 			PDEBUG(D_ERR, "Error detecting camera chip PID");
-			return high;
+			return;
 		}
 		low = i2c_r(sd, 0x0b);
 		if (low < 0) {
 			PDEBUG(D_ERR, "Error detecting camera chip VER");
-			return low;
+			return;
 		}
 		if (high == 0x76) {
 			switch (low) {
 			case 0x30:
 				err("Sensor is an OV7630/OV7635");
 				err("7630 is not supported by this driver");
-				return -1;
+				return;
 			case 0x40:
 				PDEBUG(D_PROBE, "Sensor is an OV7645");
 				sd->sensor = SEN_OV7640; /* FIXME */
@@ -2607,7 +2569,7 @@ static int ov7xx0_configure(struct sd *sd)
 				break;
 			default:
 				PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
-				return -1;
+				return;
 			}
 		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV7620");
@@ -2615,15 +2577,11 @@ static int ov7xx0_configure(struct sd *sd)
 		}
 	} else {
 		err("Unknown image sensor version: %d", rc & 3);
-		return -1;
 	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
 /* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
-static int ov6xx0_configure(struct sd *sd)
+static void ov6xx0_configure(struct sd *sd)
 {
 	int rc;
 	PDEBUG(D_PROBE, "starting OV6xx0 configuration");
@@ -2632,7 +2590,7 @@ static int ov6xx0_configure(struct sd *sd)
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
 
 	/* Ugh. The first two bits are the version bits, but
@@ -2663,13 +2621,11 @@ static int ov6xx0_configure(struct sd *sd)
 		break;
 	default:
 		err("FATAL: Unknown sensor version: 0x%02x", rc);
-		return -1;
+		return;
 	}
 
 	/* Set sensor-specific vars */
 	sd->sif = 1;
-
-	return 0;
 }
 
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
@@ -2723,7 +2679,7 @@ static void sd_reset_snapshot(struct gspca_dev *gspca_dev)
 	}
 }
 
-static int ov51x_upload_quan_tables(struct sd *sd)
+static void ov51x_upload_quan_tables(struct sd *sd)
 {
 	const unsigned char yQuanTable511[] = {
 		0, 1, 1, 2, 2, 3, 3, 4,
@@ -2763,7 +2719,7 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 
 	const unsigned char *pYTable, *pUVTable;
 	unsigned char val0, val1;
-	int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
+	int i, size, reg = R51x_COMP_LUT_BEGIN;
 
 	PDEBUG(D_PROBE, "Uploading quantization tables");
 
@@ -2783,30 +2739,23 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg, val0);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, reg, val0);
 
 		val0 = *pUVTable++;
 		val1 = *pUVTable++;
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg + size, val0);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, reg + size, val0);
 
 		reg++;
 	}
-
-	return 0;
 }
 
 /* This initializes the OV511/OV511+ and the sensor */
-static int ov511_configure(struct gspca_dev *gspca_dev)
+static void ov511_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int rc;
 
 	/* For 511 and 511+ */
 	const struct ov_regvals init_511[] = {
@@ -2852,42 +2801,27 @@ static int ov511_configure(struct gspca_dev *gspca_dev)
 
 	PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
 
-	rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
-	if (rc < 0)
-		return rc;
+	write_regvals(sd, init_511, ARRAY_SIZE(init_511));
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
-		rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
 		break;
 	case BRIDGE_OV511PLUS:
-		rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
 		break;
 	}
 
 	/* Init compression */
-	rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
-	if (rc < 0)
-		return rc;
-
-	rc = ov51x_upload_quan_tables(sd);
-	if (rc < 0) {
-		PDEBUG(D_ERR, "Error uploading quantization tables");
-		return rc;
-	}
+	write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
 
-	return 0;
+	ov51x_upload_quan_tables(sd);
 }
 
 /* This initializes the OV518/OV518+ and the sensor */
-static int ov518_configure(struct gspca_dev *gspca_dev)
+static void ov518_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int rc;
 
 	/* For 518 and 518+ */
 	const struct ov_regvals init_518[] = {
@@ -2937,42 +2871,26 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 	PDEBUG(D_PROBE, "Device revision %d",
 		0x1f & reg_r(sd, R51x_SYS_CUST_ID));
 
-	rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
-	if (rc < 0)
-		return rc;
+	write_regvals(sd, init_518, ARRAY_SIZE(init_518));
 
 	/* Set LED GPIO pin to output mode */
-	rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
-	if (rc < 0)
-		return rc;
+	reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
 
 	switch (sd->bridge) {
 	case BRIDGE_OV518:
-		rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
 		break;
 	case BRIDGE_OV518PLUS:
-		rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
 		break;
 	}
 
-	rc = ov51x_upload_quan_tables(sd);
-	if (rc < 0) {
-		PDEBUG(D_ERR, "Error uploading quantization tables");
-		return rc;
-	}
-
-	rc = reg_w(sd, 0x2f, 0x80);
-	if (rc < 0)
-		return rc;
+	ov51x_upload_quan_tables(sd);
 
-	return 0;
+	reg_w(sd, 0x2f, 0x80);
 }
 
-static int ov519_configure(struct sd *sd)
+static void ov519_configure(struct sd *sd)
 {
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a, 0x6d }, /* EnableSystem */
@@ -2990,10 +2908,10 @@ static int ov519_configure(struct sd *sd)
 		/* windows reads 0x55 at this point*/
 	};
 
-	return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
+	write_regvals(sd, init_519, ARRAY_SIZE(init_519));
 }
 
-static int ovfx2_configure(struct sd *sd)
+static void ovfx2_configure(struct sd *sd)
 {
 	static const struct ov_regvals init_fx2[] = {
 		{ 0x00, 0x60 },
@@ -3007,7 +2925,7 @@ static int ovfx2_configure(struct sd *sd)
 
 	sd->stopped = 1;
 
-	return write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
+	write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
 }
 
 /* this function is called at probe time */
@@ -3016,7 +2934,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam = &gspca_dev->cam;
-	int ret = 0;
 
 	sd->bridge = id->driver_info & BRIDGE_MASK;
 	sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
@@ -3024,30 +2941,27 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_configure(gspca_dev);
+		ov511_configure(gspca_dev);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		ret = ov518_configure(gspca_dev);
+		ov518_configure(gspca_dev);
 		break;
 	case BRIDGE_OV519:
-		ret = ov519_configure(sd);
+		ov519_configure(sd);
 		break;
 	case BRIDGE_OVFX2:
-		ret = ovfx2_configure(sd);
+		ovfx2_configure(sd);
 		cam->bulk_size = OVFX2_BULK_SIZE;
 		cam->bulk_nurbs = MAX_NURBS;
 		cam->bulk = 1;
 		break;
 	case BRIDGE_W9968CF:
-		ret = w9968cf_configure(sd);
+		w9968cf_configure(sd);
 		cam->reverse_alts = 1;
 		break;
 	}
 
-	if (ret)
-		goto error;
-
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* The OV519 must be more aggressive about sensor detection since
@@ -3057,28 +2971,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	/* Test for 76xx */
 	if (init_ov_sensor(sd, OV7xx0_SID) >= 0) {
-		if (ov7xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV7xx0");
-			goto error;
-		}
+		ov7xx0_configure(sd);
+
 	/* Test for 6xx0 */
 	} else if (init_ov_sensor(sd, OV6xx0_SID) >= 0) {
-		if (ov6xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV6xx0");
-			goto error;
-		}
+		ov6xx0_configure(sd);
+
 	/* Test for 8xx0 */
 	} else if (init_ov_sensor(sd, OV8xx0_SID) >= 0) {
-		if (ov8xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV8xx0");
-			goto error;
-		}
+		ov8xx0_configure(sd);
+
 	/* Test for 3xxx / 2xxx */
 	} else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
-		if (ov_hires_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure high res OV");
-			goto error;
-		}
+		ov_hires_configure(sd);
 	} else {
 		err("Can't determine sensor slave IDs");
 		goto error;
@@ -3139,8 +3044,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			cam->nmodes--;
 
 		/* w9968cf needs initialisation once the sensor is known */
-		if (w9968cf_init(sd) < 0)
-			goto error;
+		w9968cf_init(sd);
 		break;
 	}
 	gspca_dev->cam.ctrls = sd->ctrls;
@@ -3148,7 +3052,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
 
-	return 0;
+	return gspca_dev->usb_err;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
 	return -EINVAL;
@@ -3162,67 +3066,57 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	/* initialize the sensor */
 	switch (sd->sensor) {
 	case SEN_OV2610:
-		if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610));
+
 		/* Enable autogain, autoexpo, awb, bandfilter */
-		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
-			return -EIO;
+		i2c_w_mask(sd, 0x13, 0x27, 0x27);
 		break;
 	case SEN_OV3610:
-		if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b));
+
 		/* Enable autogain, autoexpo, awb, bandfilter */
-		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
-			return -EIO;
+		i2c_w_mask(sd, 0x13, 0x27, 0x27);
 		break;
 	case SEN_OV6620:
-		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20));
 		break;
 	case SEN_OV6630:
 	case SEN_OV66308AF:
 		sd->ctrls[CONTRAST].def = 200;
 				 /* The default is too low for the ov6630 */
-		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30));
 		break;
 	default:
 /*	case SEN_OV7610: */
 /*	case SEN_OV76BE: */
-		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
-			return -EIO;
-		if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610));
+		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
 		break;
 	case SEN_OV7620:
 	case SEN_OV7620AE:
-		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620));
 		break;
 	case SEN_OV7640:
 	case SEN_OV7648:
-		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640));
 		break;
 	case SEN_OV7670:
 		sd->ctrls[FREQ].max = 3;	/* auto */
 		sd->ctrls[FREQ].def = 3;
-		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670));
 		break;
 	case SEN_OV8610:
-		if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
 		break;
 	}
-	return 0;
+	return gspca_dev->usb_err;
 }
 
 /* Set up the OV511/OV511+ with the given image parameters.
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov511_mode_init_regs(struct sd *sd)
+static void ov511_mode_init_regs(struct sd *sd)
 {
 	int hsegs, vsegs, packet_size, fps, needed;
 	int interlaced = 0;
@@ -3233,7 +3127,8 @@ static int ov511_mode_init_regs(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt) {
 		err("Couldn't get altsetting");
-		return -EIO;
+		sd->gspca_dev.usb_err = -EIO;
+		return;
 	}
 
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
@@ -3336,8 +3231,6 @@ static int ov511_mode_init_regs(struct sd *sd)
 
 	reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
 	reg_w(sd, R51x_SYS_RESET, 0);
-
-	return 0;
 }
 
 /* Sets up the OV518/OV518+ with the given image parameters
@@ -3347,7 +3240,7 @@ static int ov511_mode_init_regs(struct sd *sd)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov518_mode_init_regs(struct sd *sd)
+static void ov518_mode_init_regs(struct sd *sd)
 {
 	int hsegs, vsegs, packet_size;
 	struct usb_host_interface *alt;
@@ -3357,7 +3250,8 @@ static int ov518_mode_init_regs(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt) {
 		err("Couldn't get altsetting");
-		return -EIO;
+		sd->gspca_dev.usb_err = -EIO;
+		return;
 	}
 
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
@@ -3460,8 +3354,6 @@ static int ov518_mode_init_regs(struct sd *sd)
 	}
 
 	reg_w(sd, 0x2f, 0x80);
-
-	return 0;
 }
 
 /* Sets up the OV519 with the given image parameters
@@ -3471,7 +3363,7 @@ static int ov518_mode_init_regs(struct sd *sd)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov519_mode_init_regs(struct sd *sd)
+static void ov519_mode_init_regs(struct sd *sd)
 {
 	static const struct ov_regvals mode_init_519_ov7670[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
@@ -3519,18 +3411,15 @@ static int ov519_mode_init_regs(struct sd *sd)
 
 	/******** Set the mode ********/
 	if (sd->sensor != SEN_OV7670) {
-		if (write_regvals(sd, mode_init_519,
-				  ARRAY_SIZE(mode_init_519)))
-			return -EIO;
+		write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519));
 		if (sd->sensor == SEN_OV7640 ||
 		    sd->sensor == SEN_OV7648) {
 			/* Select 8-bit input mode */
 			reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
 		}
 	} else {
-		if (write_regvals(sd, mode_init_519_ov7670,
-				  ARRAY_SIZE(mode_init_519_ov7670)))
-			return -EIO;
+		write_regvals(sd, mode_init_519_ov7670,
+				ARRAY_SIZE(mode_init_519_ov7670));
 	}
 
 	reg_w(sd, OV519_R10_H_SIZE,	sd->gspca_dev.width >> 4);
@@ -3626,10 +3515,9 @@ static int ov519_mode_init_regs(struct sd *sd)
 		}
 		break;
 	}
-	return 0;
 }
 
-static int mode_init_ov_sensor_regs(struct sd *sd)
+static void mode_init_ov_sensor_regs(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
 	int qvga, xstart, xend, ystart, yend;
@@ -3648,7 +3536,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
 		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
 		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
-		return 0;
+		return;
 	case SEN_OV3610:
 		if (qvga) {
 			xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
@@ -3672,7 +3560,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w(sd, 0x18, xend >> 4);
 		i2c_w(sd, 0x19, ystart >> 3);
 		i2c_w(sd, 0x1a, yend >> 3);
-		return 0;
+		return;
 	case SEN_OV8610:
 		/* For OV8610 qvga means qsvga */
 		i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5);
@@ -3766,13 +3654,11 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
 		break;
 	default:
-		return -EINVAL;
+		return;
 	}
 
 	/******** Clock programming ********/
 	i2c_w(sd, 0x11, sd->clockdiv);
-
-	return 0;
 }
 
 static void sethvflip(struct gspca_dev *gspca_dev)
@@ -3791,18 +3677,18 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 		ov51x_restart(sd);
 }
 
-static int set_ov_sensor_window(struct sd *sd)
+static void set_ov_sensor_window(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
 	int qvga, crop;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
-	int ret;
 
 	/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
 	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 ||
-	    sd->sensor == SEN_OV7670)
-		return mode_init_ov_sensor_regs(sd);
-
+	    sd->sensor == SEN_OV7670) {
+		mode_init_ov_sensor_regs(sd);
+		return;
+	}
 	gspca_dev = &sd->gspca_dev;
 	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
 	crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
@@ -3852,7 +3738,7 @@ static int set_ov_sensor_window(struct sd *sd)
 		vwsbase = vwebase = 0x03;
 		break;
 	default:
-		return -EINVAL;
+		return;
 	}
 
 	switch (sd->sensor) {
@@ -3887,23 +3773,18 @@ static int set_ov_sensor_window(struct sd *sd)
 		}
 	}
 
-	ret = mode_init_ov_sensor_regs(sd);
-	if (ret < 0)
-		return ret;
+	mode_init_ov_sensor_regs(sd);
 
 	i2c_w(sd, 0x17, hwsbase);
 	i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale));
 	i2c_w(sd, 0x19, vwsbase);
 	i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale));
-
-	return 0;
 }
 
 /* -- start the camera -- */
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int ret = 0;
 
 	/* Default for most bridges, allow bridge_mode_init_regs to override */
 	sd->sensor_width = sd->gspca_dev.width;
@@ -3912,26 +3793,22 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_mode_init_regs(sd);
+		ov511_mode_init_regs(sd);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		ret = ov518_mode_init_regs(sd);
+		ov518_mode_init_regs(sd);
 		break;
 	case BRIDGE_OV519:
-		ret = ov519_mode_init_regs(sd);
+		ov519_mode_init_regs(sd);
 		break;
 	/* case BRIDGE_OVFX2: nothing to do */
 	case BRIDGE_W9968CF:
-		ret = w9968cf_mode_init_regs(sd);
+		w9968cf_mode_init_regs(sd);
 		break;
 	}
-	if (ret < 0)
-		goto out;
 
-	ret = set_ov_sensor_window(sd);
-	if (ret < 0)
-		goto out;
+	set_ov_sensor_window(sd);
 
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
@@ -3947,14 +3824,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	sd->first_frame = 3;
 
-	ret = ov51x_restart(sd);
-	if (ret < 0)
-		goto out;
+	ov51x_restart(sd);
 	ov51x_led_control(sd, 1);
-	return 0;
-out:
-	PDEBUG(D_ERR, "camera start error:%d", ret);
-	return ret;
+	return gspca_dev->usb_err;
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 8bffde198a15..4a9e622e5e1b 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -59,18 +59,21 @@ static const struct v4l2_pix_format w9968cf_vga_mode[] = {
 		.colorspace = V4L2_COLORSPACE_JPEG},
 };
 
-static int reg_w(struct sd *sd, u16 index, u16 value);
+static void reg_w(struct sd *sd, u16 index, u16 value);
 
 /*--------------------------------------------------------------------------
   Write 64-bit data to the fast serial bus registers.
   Return 0 on success, -1 otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_write_fsb(struct sd *sd, u16* data)
+static void w9968cf_write_fsb(struct sd *sd, u16* data)
 {
 	struct usb_device *udev = sd->gspca_dev.dev;
 	u16 value;
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	value = *data++;
 	memcpy(sd->gspca_dev.usb_buf, data, 6);
 
@@ -79,20 +82,21 @@ static int w9968cf_write_fsb(struct sd *sd, u16* data)
 			      value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
 	if (ret < 0) {
 		err("Write FSB registers failed (%d)", ret);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
 /*--------------------------------------------------------------------------
   Write data to the serial bus control register.
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_write_sb(struct sd *sd, u16 value)
+static void w9968cf_write_sb(struct sd *sd, u16 value)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	/* We don't use reg_w here, as that would cause all writes when
 	   bitbanging i2c to be logged, making the logs impossible to read */
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -105,10 +109,8 @@ static int w9968cf_write_sb(struct sd *sd, u16 value)
 
 	if (ret < 0) {
 		err("Write SB reg [01] %04x failed", value);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
 /*--------------------------------------------------------------------------
@@ -119,6 +121,9 @@ static int w9968cf_read_sb(struct sd *sd)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	/* We don't use reg_r here, as the w9968cf is special and has 16
 	   bit registers instead of 8 bit */
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -126,11 +131,13 @@ static int w9968cf_read_sb(struct sd *sd)
 			1,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, 0x01, sd->gspca_dev.usb_buf, 2, 500);
-	if (ret >= 0)
+	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0] |
 		      (sd->gspca_dev.usb_buf[1] << 8);
-	else
+	} else {
 		err("Read SB reg [01] failed");
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	udelay(W9968CF_I2C_BUS_DELAY);
 
@@ -142,12 +149,12 @@ static int w9968cf_read_sb(struct sd *sd)
   This function is called by w9968cf_start_transfer().
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_upload_quantizationtables(struct sd *sd)
+static void w9968cf_upload_quantizationtables(struct sd *sd)
 {
 	u16 a, b;
-	int ret = 0, i, j;
+	int i, j;
 
-	ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
+	reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
 
 	for (i = 0, j = 0; i < 32; i++, j += 2) {
 		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j + 1]) << 8);
@@ -155,9 +162,7 @@ static int w9968cf_upload_quantizationtables(struct sd *sd)
 		reg_w(sd, 0x40 + i, a);
 		reg_w(sd, 0x60 + i, b);
 	}
-	ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
-
-	return ret;
+	reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
 }
 
 /****************************************************************************
@@ -168,50 +173,39 @@ static int w9968cf_upload_quantizationtables(struct sd *sd)
  * i2c_adap_read_byte()                                                     *
  ****************************************************************************/
 
-static int w9968cf_smbus_start(struct sd *sd)
+static void w9968cf_smbus_start(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
 }
 
-static int w9968cf_smbus_stop(struct sd *sd)
+static void w9968cf_smbus_stop(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+	w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
 }
 
-static int w9968cf_smbus_write_byte(struct sd *sd, u8 v)
+static void w9968cf_smbus_write_byte(struct sd *sd, u8 v)
 {
 	u8 bit;
-	int ret = 0, sda;
+	int sda;
 
 	for (bit = 0 ; bit < 8 ; bit++) {
 		sda = (v & 0x80) ? 2 : 0;
 		v <<= 1;
 		/* SDE=1, SDA=sda, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x10 | sda);
+		w9968cf_write_sb(sd, 0x10 | sda);
 		/* SDE=1, SDA=sda, SCL=1 */
-		ret += w9968cf_write_sb(sd, 0x11 | sda);
+		w9968cf_write_sb(sd, 0x11 | sda);
 		/* SDE=1, SDA=sda, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x10 | sda);
+		w9968cf_write_sb(sd, 0x10 | sda);
 	}
-
-	return ret;
 }
 
-static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
+static void w9968cf_smbus_read_byte(struct sd *sd, u8 *v)
 {
 	u8 bit;
-	int ret = 0;
 
 	/* No need to ensure SDA is high as we are always called after
 	   read_ack which ends with SDA high */
@@ -219,51 +213,40 @@ static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
 	for (bit = 0 ; bit < 8 ; bit++) {
 		*v <<= 1;
 		/* SDE=1, SDA=1, SCL=1 */
-		ret += w9968cf_write_sb(sd, 0x0013);
+		w9968cf_write_sb(sd, 0x0013);
 		*v |= (w9968cf_read_sb(sd) & 0x0008) ? 1 : 0;
 		/* SDE=1, SDA=1, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x0012);
+		w9968cf_write_sb(sd, 0x0012);
 	}
-
-	return ret;
 }
 
-static int w9968cf_smbus_write_nack(struct sd *sd)
+static void w9968cf_smbus_write_nack(struct sd *sd)
 {
-	int ret = 0;
-
 	/* No need to ensure SDA is high as we are always called after
 	   read_byte which ends with SDA high */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
 }
 
-static int w9968cf_smbus_read_ack(struct sd *sd)
+static void w9968cf_smbus_read_ack(struct sd *sd)
 {
-	int ret = 0, sda;
+	int sda;
 
 	/* Ensure SDA is high before raising clock to avoid a spurious stop */
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
 	sda = w9968cf_read_sb(sd);
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-	if (sda < 0)
-		ret += sda;
-	else if (sda & 0x08) {
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+	if (sda >= 0 && (sda & 0x08)) {
 		PDEBUG(D_USBI, "Did not receive i2c ACK");
-		ret += -1;
+		sd->gspca_dev.usb_err = -EIO;
 	}
-
-	return ret;
 }
 
 /* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	u16* data = (u16 *)sd->gspca_dev.usb_buf;
-	int ret = 0;
 
 	data[0] = 0x082f | ((sd->sensor_addr & 0x80) ? 0x1500 : 0x0);
 	data[0] |= (sd->sensor_addr & 0x40) ? 0x4000 : 0x0;
@@ -276,7 +259,7 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[3] = 0x1d20 | ((sd->sensor_addr & 0x02) ? 0x0001 : 0x0);
 	data[3] |= (sd->sensor_addr & 0x01) ? 0x0054 : 0x0;
 
-	ret += w9968cf_write_fsb(sd, data);
+	w9968cf_write_fsb(sd, data);
 
 	data[0] = 0x8208 | ((reg & 0x80) ? 0x0015 : 0x0);
 	data[0] |= (reg & 0x40) ? 0x0540 : 0x0;
@@ -290,7 +273,7 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[2] |= (reg & 0x01) ? 0x5400 : 0x0;
 	data[3] = 0x001d;
 
-	ret += w9968cf_write_fsb(sd, data);
+	w9968cf_write_fsb(sd, data);
 
 	data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
 	data[0] |= (value & 0x40) ? 0x0540 : 0x0;
@@ -304,14 +287,9 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[2] |= (value & 0x01) ? 0x5400 : 0x0;
 	data[3] = 0xfe1d;
 
-	ret += w9968cf_write_fsb(sd, data);
-
-	if (!ret)
-		PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
-	else
-		PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
+	w9968cf_write_fsb(sd, data);
 
-	return ret;
+	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
 }
 
 /* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
@@ -321,28 +299,28 @@ static int w9968cf_i2c_r(struct sd *sd, u8 reg)
 	u8 value;
 
 	/* Fast serial bus data control disable */
-	ret += w9968cf_write_sb(sd, 0x0013); /* don't change ! */
-
-	ret += w9968cf_smbus_start(sd);
-	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_write_byte(sd, reg);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_stop(sd);
-	ret += w9968cf_smbus_start(sd);
-	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_read_byte(sd, &value);
+	w9968cf_write_sb(sd, 0x0013); /* don't change ! */
+
+	w9968cf_smbus_start(sd);
+	w9968cf_smbus_write_byte(sd, sd->sensor_addr);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_write_byte(sd, reg);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_stop(sd);
+	w9968cf_smbus_start(sd);
+	w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_read_byte(sd, &value);
 	/* signal we don't want to read anymore, the v4l1 driver used to
 	   send an ack here which is very wrong! (and then fixed
 	   the issues this gave by retrying reads) */
-	ret += w9968cf_smbus_write_nack(sd);
-	ret += w9968cf_smbus_stop(sd);
+	w9968cf_smbus_write_nack(sd);
+	w9968cf_smbus_stop(sd);
 
 	/* Fast serial bus data control re-enable */
-	ret += w9968cf_write_sb(sd, 0x0030);
+	w9968cf_write_sb(sd, 0x0030);
 
-	if (!ret) {
+	if (sd->gspca_dev.usb_err >= 0) {
 		ret = value;
 		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
 	} else
@@ -355,29 +333,21 @@ static int w9968cf_i2c_r(struct sd *sd, u8 reg)
   Turn on the LED on some webcams. A beep should be heard too.
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_configure(struct sd *sd)
+static void w9968cf_configure(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += reg_w(sd, 0x00, 0xff00); /* power-down */
-	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
-	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
-	ret += reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
-	ret += reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
-	ret += reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
-	ret += reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
-
-	if (ret)
-		PDEBUG(D_ERR, "Couldn't turn on the LED");
+	reg_w(sd, 0x00, 0xff00); /* power-down */
+	reg_w(sd, 0x00, 0xbf17); /* reset everything */
+	reg_w(sd, 0x00, 0xbf10); /* normal operation */
+	reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
+	reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
+	reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
+	reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
 
 	sd->stopped = 1;
-
-	return ret;
 }
 
-static int w9968cf_init(struct sd *sd)
+static void w9968cf_init(struct sd *sd)
 {
-	int ret = 0;
 	unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
 		      y0 = 0x0000,
 		      u0 = y0 + hw_bufsize / 2,
@@ -386,43 +356,41 @@ static int w9968cf_init(struct sd *sd)
 		      u1 = y1 + hw_bufsize / 2,
 		      v1 = u1 + hw_bufsize / 4;
 
-	ret += reg_w(sd, 0x00, 0xff00); /* power off */
-	ret += reg_w(sd, 0x00, 0xbf10); /* power on */
-
-	ret += reg_w(sd, 0x03, 0x405d); /* DRAM timings */
-	ret += reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
+	reg_w(sd, 0x00, 0xff00); /* power off */
+	reg_w(sd, 0x00, 0xbf10); /* power on */
 
-	ret += reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
-	ret += reg_w(sd, 0x21, y0 >> 16);    /* Y buf.0, high */
-	ret += reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
-	ret += reg_w(sd, 0x25, u0 >> 16);    /* U buf.0, high */
-	ret += reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
-	ret += reg_w(sd, 0x29, v0 >> 16);    /* V buf.0, high */
+	reg_w(sd, 0x03, 0x405d); /* DRAM timings */
+	reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
 
-	ret += reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
-	ret += reg_w(sd, 0x23, y1 >> 16);    /* Y buf.1, high */
-	ret += reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
-	ret += reg_w(sd, 0x27, u1 >> 16);    /* U buf.1, high */
-	ret += reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
-	ret += reg_w(sd, 0x2b, v1 >> 16);    /* V buf.1, high */
+	reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
+	reg_w(sd, 0x21, y0 >> 16);    /* Y buf.0, high */
+	reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
+	reg_w(sd, 0x25, u0 >> 16);    /* U buf.0, high */
+	reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
+	reg_w(sd, 0x29, v0 >> 16);    /* V buf.0, high */
 
-	ret += reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
-	ret += reg_w(sd, 0x33, y1 >> 16);    /* JPEG buf 0 high */
+	reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
+	reg_w(sd, 0x23, y1 >> 16);    /* Y buf.1, high */
+	reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
+	reg_w(sd, 0x27, u1 >> 16);    /* U buf.1, high */
+	reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
+	reg_w(sd, 0x2b, v1 >> 16);    /* V buf.1, high */
 
-	ret += reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
-	ret += reg_w(sd, 0x35, y1 >> 16);    /* JPEG bug 1 high */
+	reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
+	reg_w(sd, 0x33, y1 >> 16);    /* JPEG buf 0 high */
 
-	ret += reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
-	ret += reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
-	ret += reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
-	ret += reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
+	reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
+	reg_w(sd, 0x35, y1 >> 16);    /* JPEG bug 1 high */
 
-	return ret;
+	reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
+	reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
+	reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
+	reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
 }
 
-static int w9968cf_set_crop_window(struct sd *sd)
+static void w9968cf_set_crop_window(struct sd *sd)
 {
-	int ret = 0, start_cropx, start_cropy,  x, y, fw, fh, cw, ch,
+	int start_cropx, start_cropy,  x, y, fw, fh, cw, ch,
 	    max_width, max_height;
 
 	if (sd->sif) {
@@ -464,42 +432,40 @@ static int w9968cf_set_crop_window(struct sd *sd)
 	x = (max_width - cw) / 2;
 	y = (max_height - ch) / 2;
 
-	ret += reg_w(sd, 0x10, start_cropx + x);
-	ret += reg_w(sd, 0x11, start_cropy + y);
-	ret += reg_w(sd, 0x12, start_cropx + x + cw);
-	ret += reg_w(sd, 0x13, start_cropy + y + ch);
-
-	return ret;
+	reg_w(sd, 0x10, start_cropx + x);
+	reg_w(sd, 0x11, start_cropy + y);
+	reg_w(sd, 0x12, start_cropx + x + cw);
+	reg_w(sd, 0x13, start_cropy + y + ch);
 }
 
-static int w9968cf_mode_init_regs(struct sd *sd)
+static void w9968cf_mode_init_regs(struct sd *sd)
 {
-	int ret = 0, val, vs_polarity, hs_polarity;
+	int val, vs_polarity, hs_polarity;
 
-	ret += w9968cf_set_crop_window(sd);
+	w9968cf_set_crop_window(sd);
 
-	ret += reg_w(sd, 0x14, sd->gspca_dev.width);
-	ret += reg_w(sd, 0x15, sd->gspca_dev.height);
+	reg_w(sd, 0x14, sd->gspca_dev.width);
+	reg_w(sd, 0x15, sd->gspca_dev.height);
 
 	/* JPEG width & height */
-	ret += reg_w(sd, 0x30, sd->gspca_dev.width);
-	ret += reg_w(sd, 0x31, sd->gspca_dev.height);
+	reg_w(sd, 0x30, sd->gspca_dev.width);
+	reg_w(sd, 0x31, sd->gspca_dev.height);
 
 	/* Y & UV frame buffer strides (in WORD) */
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
-		ret += reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
-		ret += reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
+		reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
+		reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
 	} else
-		ret += reg_w(sd, 0x2c, sd->gspca_dev.width);
+		reg_w(sd, 0x2c, sd->gspca_dev.width);
 
-	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
-	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
+	reg_w(sd, 0x00, 0xbf17); /* reset everything */
+	reg_w(sd, 0x00, 0xbf10); /* normal operation */
 
 	/* Transfer size in WORDS (for UYVY format only) */
 	val = sd->gspca_dev.width * sd->gspca_dev.height;
-	ret += reg_w(sd, 0x3d, val & 0xffff); /* low bits */
-	ret += reg_w(sd, 0x3e, val >> 16);    /* high bits */
+	reg_w(sd, 0x3d, val & 0xffff); /* low bits */
+	reg_w(sd, 0x3e, val >> 16);    /* high bits */
 
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
@@ -507,7 +473,7 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 		jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
 			    sd->gspca_dev.width, 0x22); /* JPEG 420 */
 		jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-		ret += w9968cf_upload_quantizationtables(sd);
+		w9968cf_upload_quantizationtables(sd);
 	}
 
 	/* Video Capture Control Register */
@@ -539,11 +505,9 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 
 	val |= 0x8000; /* capt. enable */
 
-	ret += reg_w(sd, 0x16, val);
+	reg_w(sd, 0x16, val);
 
 	sd->gspca_dev.empty_packet = 0;
-
-	return ret;
 }
 
 static void w9968cf_stop0(struct sd *sd)
-- 
cgit v1.2.3


From 858ea5e941fad6a2f38d0c9722bbb842d46662fb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 13:53:10 -0300
Subject: [media] gspca - ov519: Clearer debug and error messages
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 0591ced5d021..7ae304d0ebf6 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -1885,6 +1885,8 @@ static void reg_w(struct sd *sd, u16 index, u16 value)
 		req = 0x0a;
 		/* fall through */
 	case BRIDGE_W9968CF:
+		PDEBUG(D_USBO, "SET %02x %04x %04x",
+				req, value, index);
 		ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
 			req,
@@ -1895,6 +1897,8 @@ static void reg_w(struct sd *sd, u16 index, u16 value)
 		req = 1;
 	}
 
+	PDEBUG(D_USBO, "SET %02x 0000 %04x %02x",
+			req, index, value);
 	sd->gspca_dev.usb_buf[0] = value;
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
@@ -1904,13 +1908,10 @@ static void reg_w(struct sd *sd, u16 index, u16 value)
 			sd->gspca_dev.usb_buf, 1, 500);
 leave:
 	if (ret < 0) {
-		err("Write reg 0x%04x -> [0x%02x] failed",
-		       value, index);
+		err("reg_w %02x failed %d", index, ret);
 		sd->gspca_dev.usb_err = ret;
 		return;
 	}
-
-	PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
 }
 
 /* Read from a OV519 register, note not valid for the w9968cf!! */
@@ -1943,9 +1944,10 @@ static int reg_r(struct sd *sd, u16 index)
 
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-		PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
+		PDEBUG(D_USBI, "GET %02x 0000 %04x %02x",
+			req, index, ret);
 	} else {
-		err("Read reg [0x%02x] failed", index);
+		err("reg_r %02x failed %d", index, ret);
 		sd->gspca_dev.usb_err = ret;
 	}
 
@@ -1970,7 +1972,7 @@ static int reg_r8(struct sd *sd,
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
 	} else {
-		err("Read reg 8 [0x%02x] failed", index);
+		err("reg_r8 %02x failed %d", index, ret);
 		sd->gspca_dev.usb_err = ret;
 	}
 
@@ -2023,7 +2025,7 @@ static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
 			0, index,
 			sd->gspca_dev.usb_buf, n, 500);
 	if (ret < 0) {
-		err("Write reg32 [%02x] %08x failed", index, value);
+		err("reg_w32 %02x failed %d", index, ret);
 		sd->gspca_dev.usb_err = ret;
 	}
 }
@@ -2032,7 +2034,7 @@ static void ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int rc, retries;
 
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	PDEBUG(D_USBO, "ov511_i2c_w %02x %02x", reg, value);
 
 	/* Three byte write cycle */
 	for (retries = 6; ; ) {
@@ -2118,7 +2120,7 @@ static int ov511_i2c_r(struct sd *sd, u8 reg)
 
 	value = reg_r(sd, R51x_I2C_DATA);
 
-	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+	PDEBUG(D_USBI, "ov511_i2c_r %02x %02x", reg, value);
 
 	/* This is needed to make i2c_w() work */
 	reg_w(sd, R511_I2C_CTL, 0x05);
@@ -2135,7 +2137,7 @@ static void ov518_i2c_w(struct sd *sd,
 		u8 reg,
 		u8 value)
 {
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	PDEBUG(D_USBO, "ov518_i2c_w %02x %02x", reg, value);
 
 	/* Select camera register */
 	reg_w(sd, R51x_I2C_SADDR_3, reg);
@@ -2171,7 +2173,7 @@ static int ov518_i2c_r(struct sd *sd, u8 reg)
 	/* Initiate 2-byte read cycle */
 	reg_w(sd, R518_I2C_CTL, 0x05);
 	value = reg_r(sd, R51x_I2C_DATA);
-	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+	PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value);
 	return value;
 }
 
@@ -2189,11 +2191,11 @@ static void ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
 			(u16) value, (u16) reg, NULL, 0, 500);
 
 	if (ret < 0) {
-		err("i2c 0x%02x -> [0x%02x] failed", value, reg);
+		err("ovfx2_i2c_w %02x failed %d", reg, ret);
 		sd->gspca_dev.usb_err = ret;
 	}
 
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	PDEBUG(D_USBO, "ovfx2_i2c_w %02x %02x", reg, value);
 }
 
 static int ovfx2_i2c_r(struct sd *sd, u8 reg)
@@ -2211,9 +2213,9 @@ static int ovfx2_i2c_r(struct sd *sd, u8 reg)
 
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret);
+		PDEBUG(D_USBI, "ovfx2_i2c_r %02x %02x", reg, ret);
 	} else {
-		err("i2c read [0x%02x] failed", reg);
+		err("ovfx2_i2c_r %02x failed %d", reg, ret);
 		sd->gspca_dev.usb_err = ret;
 	}
 
@@ -2472,7 +2474,7 @@ static void ov_hires_configure(struct sd *sd)
 		PDEBUG(D_PROBE, "Sensor is an OV3610");
 		sd->sensor = SEN_OV3610;
 	} else {
-		err("Error unknown sensor type: 0x%02x%02x",
+		err("Error unknown sensor type: %02x%02x",
 			high, low);
 	}
 }
-- 
cgit v1.2.3


From e2817029b3f139bd85360536153467bd8f7f863b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 13:59:48 -0300
Subject: [media] gspca - ov519: Check the disabled controls at start time only
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 7ae304d0ebf6..d60322047265 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -3667,8 +3667,6 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor != SEN_OV7670)
-		return;
 	if (sd->gspca_dev.streaming)
 		ov51x_stop(sd);
 	i2c_w_mask(sd, OV7670_R1E_MVFP,
@@ -3812,12 +3810,18 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	set_ov_sensor_window(sd);
 
-	setcontrast(gspca_dev);
-	setbrightness(gspca_dev);
-	setcolors(gspca_dev);
-	sethvflip(gspca_dev);
-	setautobright(gspca_dev);
-	setfreq_i(sd);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << CONTRAST)))
+		setcontrast(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << BRIGHTNESS)))
+		setbrightness(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << COLORS)))
+		setcolors(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & ((1 << HFLIP) | (1 << VFLIP))))
+		sethvflip(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << AUTOBRIGHT)))
+		setautobright(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << FREQ)))
+		setfreq_i(sd);
 
 	/* Force clear snapshot state in case the snapshot button was
 	   pressed while we weren't streaming */
@@ -4184,19 +4188,11 @@ static void setautobright(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7648 ||
-	    sd->sensor == SEN_OV7670 ||
-	    sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		return;
-
 	i2c_w_mask(sd, 0x2d, sd->ctrls[AUTOBRIGHT].val ? 0x10 : 0x00, 0x10);
 }
 
 static void setfreq_i(struct sd *sd)
 {
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		return;
-
 	if (sd->sensor == SEN_OV7670) {
 		switch (sd->ctrls[FREQ].val) {
 		case 0: /* Banding filter disabled */
-- 
cgit v1.2.3


From a23acec4bca79f2168a5aeacc8d85386b70ae522 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 15:07:35 -0300
Subject: [media] gspca - ov519: Simplify the LED control functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index d60322047265..2484e5222d4a 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2639,14 +2639,14 @@ static void ov51x_led_control(struct sd *sd, int on)
 	switch (sd->bridge) {
 	/* OV511 has no LED control */
 	case BRIDGE_OV511PLUS:
-		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0);
+		reg_w(sd, R511_SYS_LED_CTL, on);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02);
+		reg_w_mask(sd, R518_GPIO_OUT, 0x02 * on, 0x02);
 		break;
 	case BRIDGE_OV519:
-		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, on, 1);
 		break;
 	}
 }
@@ -2938,7 +2938,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam = &gspca_dev->cam;
 
 	sd->bridge = id->driver_info & BRIDGE_MASK;
-	sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
+	sd->invert_led = (id->driver_info & BRIDGE_INVERT_LED) != 0;
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
-- 
cgit v1.2.3


From 5927abcb21d0dd10c960517453e37302acf2269e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 15:32:29 -0300
Subject: [media] gspca - ov519: Change the ov519 start and stop sequences
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

- start and stop streaming are done via the FRAR
- streaming suspend (for control change) is done by video reset

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 2484e5222d4a..43b86b1b57fb 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2325,6 +2325,8 @@ static inline void ov51x_stop(struct sd *sd)
 		break;
 	case BRIDGE_OV519:
 		reg_w(sd, OV519_R51_RESET1, 0x0f);
+		reg_w(sd, OV519_R51_RESET1, 0x00);
+		reg_w(sd, 0x22, 0x00);		/* FRAR */
 		break;
 	case BRIDGE_OVFX2:
 		reg_w_mask(sd, 0x0f, 0x00, 0x02);
@@ -2356,7 +2358,9 @@ static inline void ov51x_restart(struct sd *sd)
 		reg_w(sd, R51x_SYS_RESET, 0x00);
 		break;
 	case BRIDGE_OV519:
+		reg_w(sd, OV519_R51_RESET1, 0x0f);
 		reg_w(sd, OV519_R51_RESET1, 0x00);
+		reg_w(sd, 0x22, 0x1d);		/* FRAR */
 		break;
 	case BRIDGE_OVFX2:
 		reg_w_mask(sd, 0x0f, 0x02, 0x02);
@@ -3668,13 +3672,13 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	if (sd->gspca_dev.streaming)
-		ov51x_stop(sd);
+		reg_w(sd, OV519_R51_RESET1, 0x0f);	/* block stream */
 	i2c_w_mask(sd, OV7670_R1E_MVFP,
 		OV7670_MVFP_MIRROR * sd->ctrls[HFLIP].val
 			| OV7670_MVFP_VFLIP * sd->ctrls[VFLIP].val,
 		OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP);
 	if (sd->gspca_dev.streaming)
-		ov51x_restart(sd);
+		reg_w(sd, OV519_R51_RESET1, 0x00);	/* restart stream */
 }
 
 static void set_ov_sensor_window(struct sd *sd)
-- 
cgit v1.2.3


From b4e96ea30a211c0979e9e0ea10f39dfa50afb8fa Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Fri, 12 Nov 2010 16:13:17 -0300
Subject: [media] gspca - ov519: Initialize the ov519 snapshot register
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 43b86b1b57fb..1d0fb4d91db4 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -513,6 +513,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /* OV519 System Controller register numbers */
 #define OV519_R51_RESET1		0x51
 #define OV519_R54_EN_CLK1		0x54
+#define OV519_R57_SNAPSHOT		0x57
 
 #define OV519_GPIO_DATA_OUT0		0x71
 #define OV519_GPIO_IO_CTRL0		0x72
@@ -3864,6 +3865,8 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		sd->snapshot_pressed = 0;
 	}
 #endif
+	if (sd->bridge == BRIDGE_OV519)
+		reg_w(sd, OV519_R57_SNAPSHOT, 0x23);
 }
 
 static void ov51x_handle_button(struct gspca_dev *gspca_dev, u8 state)
-- 
cgit v1.2.3


From 7491f785dd02bc35551e0463d798959b15644c1d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 13 Nov 2010 03:56:41 -0300
Subject: [media] gspca - ov519: Re-initialize the webcam at resume time
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 90 ++++++++++++++++++++++-----------------
 1 file changed, 52 insertions(+), 38 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 1d0fb4d91db4..08f07c3488d8 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2948,28 +2948,64 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ov511_configure(gspca_dev);
+		cam->cam_mode = ov511_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		ov518_configure(gspca_dev);
+		cam->cam_mode = ov518_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
 		break;
 	case BRIDGE_OV519:
-		ov519_configure(sd);
+		cam->cam_mode = ov519_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+		sd->invert_led = !sd->invert_led;
 		break;
 	case BRIDGE_OVFX2:
-		ovfx2_configure(sd);
+		cam->cam_mode = ov519_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
 		cam->bulk_size = OVFX2_BULK_SIZE;
 		cam->bulk_nurbs = MAX_NURBS;
 		cam->bulk = 1;
 		break;
 	case BRIDGE_W9968CF:
-		w9968cf_configure(sd);
+		cam->cam_mode = w9968cf_vga_mode;
+		cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
 		cam->reverse_alts = 1;
 		break;
 	}
 
-	ov51x_led_control(sd, 0);	/* turn LED off */
+	gspca_dev->cam.ctrls = sd->ctrls;
+	sd->quality = QUALITY_DEF;
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ov511_configure(gspca_dev);
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ov518_configure(gspca_dev);
+		break;
+	case BRIDGE_OV519:
+		ov519_configure(sd);
+		break;
+	case BRIDGE_OVFX2:
+		ovfx2_configure(sd);
+		break;
+	case BRIDGE_W9968CF:
+		w9968cf_configure(sd);
+		break;
+	}
 
 	/* The OV519 must be more aggressive about sensor detection since
 	 * I2C write will never fail if the sensor is not present. We have
@@ -2999,32 +3035,25 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	if (sd->sensor < 0)
 		goto error;
 
+	ov51x_led_control(sd, 0);	/* turn LED off */
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		if (!sd->sif) {
-			cam->cam_mode = ov511_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov511_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov511_sif_mode);
 		}
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		if (!sd->sif) {
-			cam->cam_mode = ov518_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov518_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov518_sif_mode);
 		}
 		break;
 	case BRIDGE_OV519:
-		if (!sd->sif) {
-			cam->cam_mode = ov519_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov519_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
@@ -3036,40 +3065,22 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		} else if (sd->sensor == SEN_OV3610) {
 			cam->cam_mode = ovfx2_ov3610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
-		} else if (!sd->sif) {
-			cam->cam_mode = ov519_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
-		} else {
+		} else if (sd->sif) {
 			cam->cam_mode = ov519_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
 		break;
 	case BRIDGE_W9968CF:
-		cam->cam_mode = w9968cf_vga_mode;
-		cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
 		if (sd->sif)
-			cam->nmodes--;
+			cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode) - 1;
 
 		/* w9968cf needs initialisation once the sensor is known */
 		w9968cf_init(sd);
 		break;
 	}
-	gspca_dev->cam.ctrls = sd->ctrls;
-	sd->quality = QUALITY_DEF;
 
 	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
 
-	return gspca_dev->usb_err;
-error:
-	PDEBUG(D_ERR, "OV519 Config failed");
-	return -EINVAL;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
 	/* initialize the sensor */
 	switch (sd->sensor) {
 	case SEN_OV2610:
@@ -3117,6 +3128,9 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		break;
 	}
 	return gspca_dev->usb_err;
+error:
+	PDEBUG(D_ERR, "OV519 Config failed");
+	return -EINVAL;
 }
 
 /* Set up the OV511/OV511+ with the given image parameters.
-- 
cgit v1.2.3


From 42e142f6b72493b5daec9950c4c83d20ccf56a0d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 13 Nov 2010 05:10:27 -0300
Subject: [media] gspca - ov519: New sensor ov7660 with bridge ov530 (ov519)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

[mchehab@redhat.com: Some CodingStyle fixes]
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 394 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 386 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 08f07c3488d8..0ed21dbb46cd 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -82,7 +82,7 @@ struct sd {
 #define BRIDGE_OV511PLUS	1
 #define BRIDGE_OV518		2
 #define BRIDGE_OV518PLUS	3
-#define BRIDGE_OV519		4
+#define BRIDGE_OV519		4		/* = ov530 */
 #define BRIDGE_OVFX2		5
 #define BRIDGE_W9968CF		6
 #define BRIDGE_MASK		7
@@ -127,6 +127,7 @@ enum sensors {
 	SEN_OV7620AE,
 	SEN_OV7640,
 	SEN_OV7648,
+	SEN_OV7660,
 	SEN_OV7670,
 	SEN_OV76BE,
 	SEN_OV8610,
@@ -183,7 +184,7 @@ static const struct ctrl sd_ctrls[] = {
 	    },
 	    .set_control = setcolors,
 	},
-/* The flip controls work with ov7670 only */
+/* The flip controls work for sensors ov7660 and ov7670 only */
 [HFLIP] = {
 	    {
 		.id      = V4L2_CID_HFLIP,
@@ -268,6 +269,8 @@ static const unsigned ctrl_dis[] = {
 			(1 << AUTOBRIGHT) |
 			(1 << CONTRAST),
 
+[SEN_OV7660] =		(1 << AUTOBRIGHT),
+
 [SEN_OV7670] =		(1 << COLORS) |
 			(1 << AUTOBRIGHT),
 
@@ -572,7 +575,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV7610_REG_ID_LOW	0x1d	/* manufacturer ID LSB */
 #define OV7610_REG_COM_I	0x29	/* misc settings */
 
-/* OV7670 registers */
+/* OV7660 and OV7670 registers */
 #define OV7670_R00_GAIN		0x00	/* Gain lower 8 bits (rest in vref) */
 #define OV7670_R01_BLUE		0x01	/* blue gain */
 #define OV7670_R02_RED		0x02	/* red gain */
@@ -625,6 +628,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /*#define   OV7670_COM15_R00FF	 0xc0	 *	00 to FF */
 #define OV7670_R41_COM16	0x41	/* Control 16 */
 #define   OV7670_COM16_AWBGAIN	 0x08	/* AWB gain enable */
+/* end of ov7660 common registers */
 #define OV7670_R55_BRIGHT	0x55	/* Brightness */
 #define OV7670_R56_CONTRAS	0x56	/* Contrast control */
 #define OV7670_R69_GFIX		0x69	/* Fix gain control */
@@ -1577,6 +1581,150 @@ static const struct ov_i2c_regvals norm_7640[] = {
 	{ 0x12, 0x14 },
 };
 
+static const struct ov_regvals init_519_ov7660[] = {
+	{ 0x5d,	0x03 }, /* Turn off suspend mode */
+	{ 0x53,	0x9b }, /* 0x9f enables the (unused) microcontroller */
+	{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+	{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
+	{ 0xa3,	0x18 },
+	{ 0xa4,	0x04 },
+	{ 0xa5,	0x28 },
+	{ 0x37,	0x00 },	/* SetUsbInit */
+	{ 0x55,	0x02 }, /* 4.096 Mhz audio clock */
+	/* Enable both fields, YUV Input, disable defect comp (why?) */
+	{ 0x20,	0x0c },	/* 0x0d does U <-> V swap */
+	{ 0x21,	0x38 },
+	{ 0x22,	0x1d },
+	{ 0x17,	0x50 }, /* undocumented */
+	{ 0x37,	0x00 }, /* undocumented */
+	{ 0x40,	0xff }, /* I2C timeout counter */
+	{ 0x46,	0x00 }, /* I2C clock prescaler */
+};
+static const struct ov_i2c_regvals norm_7660[] = {
+	{OV7670_R12_COM7, OV7670_COM7_RESET},
+	{OV7670_R11_CLKRC, 0x81},
+	{0x92, 0x00},			/* DM_LNL */
+	{0x93, 0x00},			/* DM_LNH */
+	{0x9d, 0x4c},			/* BD50ST */
+	{0x9e, 0x3f},			/* BD60ST */
+	{OV7670_R3B_COM11, 0x02},
+	{OV7670_R13_COM8, 0xf5},
+	{OV7670_R10_AECH, 0x00},
+	{OV7670_R00_GAIN, 0x00},
+	{OV7670_R01_BLUE, 0x7c},
+	{OV7670_R02_RED, 0x9d},
+	{OV7670_R12_COM7, 0x00},
+	{OV7670_R04_COM1, 00},
+	{OV7670_R18_HSTOP, 0x01},
+	{OV7670_R17_HSTART, 0x13},
+	{OV7670_R32_HREF, 0x92},
+	{OV7670_R19_VSTART, 0x02},
+	{OV7670_R1A_VSTOP, 0x7a},
+	{OV7670_R03_VREF, 0x00},
+	{OV7670_R0E_COM5, 0x04},
+	{OV7670_R0F_COM6, 0x62},
+	{OV7670_R15_COM10, 0x00},
+	{0x16, 0x02},			/* RSVD */
+	{0x1b, 0x00},			/* PSHFT */
+	{OV7670_R1E_MVFP, 0x01},
+	{0x29, 0x3c},			/* RSVD */
+	{0x33, 0x00},			/* CHLF */
+	{0x34, 0x07},			/* ARBLM */
+	{0x35, 0x84},			/* RSVD */
+	{0x36, 0x00},			/* RSVD */
+	{0x37, 0x04},			/* ADC */
+	{0x39, 0x43},			/* OFON */
+	{OV7670_R3A_TSLB, 0x00},
+	{OV7670_R3C_COM12, 0x6c},
+	{OV7670_R3D_COM13, 0x98},
+	{OV7670_R3F_EDGE, 0x23},
+	{OV7670_R40_COM15, 0xc1},
+	{OV7670_R41_COM16, 0x22},
+	{0x6b, 0x0a},			/* DBLV */
+	{0xa1, 0x08},			/* RSVD */
+	{0x69, 0x80},			/* HV */
+	{0x43, 0xf0},			/* RSVD.. */
+	{0x44, 0x10},
+	{0x45, 0x78},
+	{0x46, 0xa8},
+	{0x47, 0x60},
+	{0x48, 0x80},
+	{0x59, 0xba},
+	{0x5a, 0x9a},
+	{0x5b, 0x22},
+	{0x5c, 0xb9},
+	{0x5d, 0x9b},
+	{0x5e, 0x10},
+	{0x5f, 0xe0},
+	{0x60, 0x85},
+	{0x61, 0x60},
+	{0x9f, 0x9d},			/* RSVD */
+	{0xa0, 0xa0},			/* DSPC2 */
+	{0x4f, 0x60},			/* matrix */
+	{0x50, 0x64},
+	{0x51, 0x04},
+	{0x52, 0x18},
+	{0x53, 0x3c},
+	{0x54, 0x54},
+	{0x55, 0x40},
+	{0x56, 0x40},
+	{0x57, 0x40},
+	{0x58, 0x0d},			/* matrix sign */
+	{0x8b, 0xcc},			/* RSVD */
+	{0x8c, 0xcc},
+	{0x8d, 0xcf},
+	{0x6c, 0x40},			/* gamma curve */
+	{0x6d, 0xe0},
+	{0x6e, 0xa0},
+	{0x6f, 0x80},
+	{0x70, 0x70},
+	{0x71, 0x80},
+	{0x72, 0x60},
+	{0x73, 0x60},
+	{0x74, 0x50},
+	{0x75, 0x40},
+	{0x76, 0x38},
+	{0x77, 0x3c},
+	{0x78, 0x32},
+	{0x79, 0x1a},
+	{0x7a, 0x28},
+	{0x7b, 0x24},
+	{0x7c, 0x04},			/* gamma curve */
+	{0x7d, 0x12},
+	{0x7e, 0x26},
+	{0x7f, 0x46},
+	{0x80, 0x54},
+	{0x81, 0x64},
+	{0x82, 0x70},
+	{0x83, 0x7c},
+	{0x84, 0x86},
+	{0x85, 0x8e},
+	{0x86, 0x9c},
+	{0x87, 0xab},
+	{0x88, 0xc4},
+	{0x89, 0xd1},
+	{0x8a, 0xe5},
+	{OV7670_R14_COM9, 0x1e},
+	{OV7670_R24_AEW, 0x80},
+	{OV7670_R25_AEB, 0x72},
+	{OV7670_R26_VPT, 0xb3},
+	{0x62, 0x80},			/* LCC1 */
+	{0x63, 0x80},			/* LCC2 */
+	{0x64, 0x06},			/* LCC3 */
+	{0x65, 0x00},			/* LCC4 */
+	{0x66, 0x01},			/* LCC5 */
+	{0x94, 0x0e},			/* RSVD.. */
+	{0x95, 0x14},
+	{OV7670_R13_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| 0x10
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AWB
+			| OV7670_COM8_AEC},
+	{0xa1, 0xc8}
+};
+
 /* 7670. Defaults taken from OmniVision provided data,
 *  as provided by Jonathan Corbet of OLPC		*/
 static const struct ov_i2c_regvals norm_7670[] = {
@@ -2574,6 +2722,11 @@ static void ov7xx0_configure(struct sd *sd)
 				PDEBUG(D_PROBE, "Sensor is an OV7648");
 				sd->sensor = SEN_OV7648;
 				break;
+			case 0x60:
+				PDEBUG(D_PROBE, "Sensor is a OV7660");
+				sd->sensor = SEN_OV7660;
+				sd->invert_led = 0;
+				break;
 			default:
 				PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
 				return;
@@ -2935,6 +3088,91 @@ static void ovfx2_configure(struct sd *sd)
 	write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
 }
 
+/* set the mode */
+/* This function works for ov7660 only */
+static void ov519_set_mode(struct sd *sd)
+{
+	static const struct ov_regvals bridge_ov7660[2][10] = {
+		{{0x10, 0x14}, {0x11, 0x1e}, {0x12, 0x00}, {0x13, 0x00},
+		 {0x14, 0x00}, {0x15, 0x00}, {0x16, 0x00}, {0x20, 0x0c},
+		 {0x25, 0x01}, {0x26, 0x00}},
+		{{0x10, 0x28}, {0x11, 0x3c}, {0x12, 0x00}, {0x13, 0x00},
+		 {0x14, 0x00}, {0x15, 0x00}, {0x16, 0x00}, {0x20, 0x0c},
+		 {0x25, 0x03}, {0x26, 0x00}}
+	};
+	static const struct ov_i2c_regvals sensor_ov7660[2][3] = {
+		{{0x12, 0x00}, {0x24, 0x00}, {0x0c, 0x0c}},
+		{{0x12, 0x00}, {0x04, 0x00}, {0x0c, 0x00}}
+	};
+	static const struct ov_i2c_regvals sensor_ov7660_2[] = {
+		{OV7670_R17_HSTART, 0x13},
+		{OV7670_R18_HSTOP, 0x01},
+		{OV7670_R32_HREF, 0x92},
+		{OV7670_R19_VSTART, 0x02},
+		{OV7670_R1A_VSTOP, 0x7a},
+		{OV7670_R03_VREF, 0x00},
+/*		{0x33, 0x00}, */
+/*		{0x34, 0x07}, */
+/*		{0x36, 0x00}, */
+/*		{0x6b, 0x0a}, */
+	};
+
+	write_regvals(sd, bridge_ov7660[sd->gspca_dev.curr_mode],
+			ARRAY_SIZE(bridge_ov7660[0]));
+	write_i2c_regvals(sd, sensor_ov7660[sd->gspca_dev.curr_mode],
+			ARRAY_SIZE(sensor_ov7660[0]));
+	write_i2c_regvals(sd, sensor_ov7660_2,
+			ARRAY_SIZE(sensor_ov7660_2));
+}
+
+/* set the frame rate */
+/* This function works for sensors ov7640, ov7648 ov7660 and ov7670 only */
+static void ov519_set_fr(struct sd *sd)
+{
+	int fr;
+	u8 clock;
+	/* frame rate table with indices:
+	 *	- mode = 0: 320x240, 1: 640x480
+	 *	- fr rate = 0: 30, 1: 25, 2: 20, 3: 15, 4: 10, 5: 5
+	 *	- reg = 0: bridge a4, 1: bridge 23, 2: sensor 11 (clock)
+	 */
+	static const u8 fr_tb[2][6][3] = {
+		{{0x04, 0xff, 0x00},
+		 {0x04, 0x1f, 0x00},
+		 {0x04, 0x1b, 0x00},
+		 {0x04, 0x15, 0x00},
+		 {0x04, 0x09, 0x00},
+		 {0x04, 0x01, 0x00}},
+		{{0x0c, 0xff, 0x00},
+		 {0x0c, 0x1f, 0x00},
+		 {0x0c, 0x1b, 0x00},
+		 {0x04, 0xff, 0x01},
+		 {0x04, 0x1f, 0x01},
+		 {0x04, 0x1b, 0x01}},
+	};
+
+	if (frame_rate > 0)
+		sd->frame_rate = frame_rate;
+	if (sd->frame_rate >= 30)
+		fr = 0;
+	else if (sd->frame_rate >= 25)
+		fr = 1;
+	else if (sd->frame_rate >= 20)
+		fr = 2;
+	else if (sd->frame_rate >= 15)
+		fr = 3;
+	else if (sd->frame_rate >= 10)
+		fr = 4;
+	else
+		fr = 5;
+	reg_w(sd, 0xa4, fr_tb[sd->gspca_dev.curr_mode][fr][0]);
+	reg_w(sd, 0x23, fr_tb[sd->gspca_dev.curr_mode][fr][1]);
+	clock = fr_tb[sd->gspca_dev.curr_mode][fr][2];
+	if (sd->sensor == SEN_OV7660)
+		clock |= 0x80;		/* enable double clock */
+	ov518_i2c_w(sd, OV7670_R11_CLKRC, clock);
+}
+
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
@@ -3118,6 +3356,34 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case SEN_OV7648:
 		write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640));
 		break;
+	case SEN_OV7660:
+		i2c_w(sd, OV7670_R12_COM7, OV7670_COM7_RESET);
+		msleep(14);
+		reg_w(sd, OV519_R57_SNAPSHOT, 0x23);
+		write_regvals(sd, init_519_ov7660,
+				ARRAY_SIZE(init_519_ov7660));
+		write_i2c_regvals(sd, norm_7660, ARRAY_SIZE(norm_7660));
+		sd->gspca_dev.curr_mode = 1;	/* 640x480 */
+		sd->frame_rate = 15;
+		ov519_set_mode(sd);
+		ov519_set_fr(sd);
+		sd->ctrls[COLORS].max = 4;	/* 0..4 */
+		sd->ctrls[COLORS].val =
+			sd->ctrls[COLORS].def = 2;
+		setcolors(gspca_dev);
+		sd->ctrls[CONTRAST].max = 6;	/* 0..6 */
+		sd->ctrls[CONTRAST].val =
+			sd->ctrls[CONTRAST].def = 3;
+		setcontrast(gspca_dev);
+		sd->ctrls[BRIGHTNESS].max = 6;	/* 0..6 */
+		sd->ctrls[BRIGHTNESS].val =
+			sd->ctrls[BRIGHTNESS].def = 3;
+		setbrightness(gspca_dev);
+		sd_reset_snapshot(gspca_dev);
+		ov51x_restart(sd);
+		ov51x_stop(sd);			/* not in win traces */
+		ov51x_led_control(sd, 0);
+		break;
 	case SEN_OV7670:
 		sd->ctrls[FREQ].max = 3;	/* auto */
 		sd->ctrls[FREQ].def = 3;
@@ -3431,16 +3697,21 @@ static void ov519_mode_init_regs(struct sd *sd)
 	};
 
 	/******** Set the mode ********/
-	if (sd->sensor != SEN_OV7670) {
+	switch (sd->sensor) {
+	default:
 		write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519));
 		if (sd->sensor == SEN_OV7640 ||
 		    sd->sensor == SEN_OV7648) {
 			/* Select 8-bit input mode */
 			reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
 		}
-	} else {
+		break;
+	case SEN_OV7660:
+		return;		/* done by ov519_set_mode/fr() */
+	case SEN_OV7670:
 		write_regvals(sd, mode_init_519_ov7670,
 				ARRAY_SIZE(mode_init_519_ov7670));
+		break;
 	}
 
 	reg_w(sd, OV519_R10_H_SIZE,	sd->gspca_dev.width >> 4);
@@ -3682,6 +3953,7 @@ static void mode_init_ov_sensor_regs(struct sd *sd)
 	i2c_w(sd, 0x11, sd->clockdiv);
 }
 
+/* this function works for bridge ov519 and sensors ov7660 and ov7670 only */
 static void sethvflip(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -3703,11 +3975,18 @@ static void set_ov_sensor_window(struct sd *sd)
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
 
 	/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 ||
-	    sd->sensor == SEN_OV7670) {
+	switch (sd->sensor) {
+	case SEN_OV2610:
+	case SEN_OV3610:
+	case SEN_OV7670:
 		mode_init_ov_sensor_regs(sd);
 		return;
+	case SEN_OV7660:
+		ov519_set_mode(sd);
+		ov519_set_fr(sd);
+		return;
 	}
+
 	gspca_dev = &sd->gspca_dev;
 	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
 	crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
@@ -4101,6 +4380,22 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals brit_7660[][7] = {
+		{{0x0f, 0x6a}, {0x24, 0x40}, {0x25, 0x2b}, {0x26, 0x90},
+			{0x27, 0xe0}, {0x28, 0xe0}, {0x2c, 0xe0}},
+		{{0x0f, 0x6a}, {0x24, 0x50}, {0x25, 0x40}, {0x26, 0xa1},
+			{0x27, 0xc0}, {0x28, 0xc0}, {0x2c, 0xc0}},
+		{{0x0f, 0x6a}, {0x24, 0x68}, {0x25, 0x58}, {0x26, 0xc2},
+			{0x27, 0xa0}, {0x28, 0xa0}, {0x2c, 0xa0}},
+		{{0x0f, 0x6a}, {0x24, 0x70}, {0x25, 0x68}, {0x26, 0xd3},
+			{0x27, 0x80}, {0x28, 0x80}, {0x2c, 0x80}},
+		{{0x0f, 0x6a}, {0x24, 0x80}, {0x25, 0x70}, {0x26, 0xd3},
+			{0x27, 0x20}, {0x28, 0x20}, {0x2c, 0x20}},
+		{{0x0f, 0x6a}, {0x24, 0x88}, {0x25, 0x78}, {0x26, 0xd3},
+			{0x27, 0x40}, {0x28, 0x40}, {0x2c, 0x40}},
+		{{0x0f, 0x6a}, {0x24, 0x90}, {0x25, 0x80}, {0x26, 0xd4},
+			{0x27, 0x60}, {0x28, 0x60}, {0x2c, 0x60}}
+	};
 
 	val = sd->ctrls[BRIGHTNESS].val;
 	switch (sd->sensor) {
@@ -4120,6 +4415,10 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		if (!sd->ctrls[AUTOBRIGHT].val)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
+	case SEN_OV7660:
+		write_i2c_regvals(sd, brit_7660[val],
+				ARRAY_SIZE(brit_7660[0]));
+		break;
 	case SEN_OV7670:
 /*win trace
  *		i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_AEC); */
@@ -4132,6 +4431,64 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals contrast_7660[][31] = {
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf8}, {0x6f, 0xa0},
+		 {0x70, 0x58}, {0x71, 0x38}, {0x72, 0x30}, {0x73, 0x30},
+		 {0x74, 0x28}, {0x75, 0x28}, {0x76, 0x24}, {0x77, 0x24},
+		 {0x78, 0x22}, {0x79, 0x28}, {0x7a, 0x2a}, {0x7b, 0x34},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3d}, {0x7f, 0x65},
+		 {0x80, 0x70}, {0x81, 0x77}, {0x82, 0x7d}, {0x83, 0x83},
+		 {0x84, 0x88}, {0x85, 0x8d}, {0x86, 0x96}, {0x87, 0x9f},
+		 {0x88, 0xb0}, {0x89, 0xc4}, {0x8a, 0xd9}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf8}, {0x6f, 0x94},
+		 {0x70, 0x58}, {0x71, 0x40}, {0x72, 0x30}, {0x73, 0x30},
+		 {0x74, 0x30}, {0x75, 0x30}, {0x76, 0x2c}, {0x77, 0x24},
+		 {0x78, 0x22}, {0x79, 0x28}, {0x7a, 0x2a}, {0x7b, 0x31},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3d}, {0x7f, 0x62},
+		 {0x80, 0x6d}, {0x81, 0x75}, {0x82, 0x7b}, {0x83, 0x81},
+		 {0x84, 0x87}, {0x85, 0x8d}, {0x86, 0x98}, {0x87, 0xa1},
+		 {0x88, 0xb2}, {0x89, 0xc6}, {0x8a, 0xdb}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf0}, {0x6f, 0x84},
+		 {0x70, 0x58}, {0x71, 0x48}, {0x72, 0x40}, {0x73, 0x40},
+		 {0x74, 0x28}, {0x75, 0x28}, {0x76, 0x28}, {0x77, 0x24},
+		 {0x78, 0x26}, {0x79, 0x28}, {0x7a, 0x28}, {0x7b, 0x34},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3c}, {0x7f, 0x5d},
+		 {0x80, 0x68}, {0x81, 0x71}, {0x82, 0x79}, {0x83, 0x81},
+		 {0x84, 0x86}, {0x85, 0x8b}, {0x86, 0x95}, {0x87, 0x9e},
+		 {0x88, 0xb1}, {0x89, 0xc5}, {0x8a, 0xd9}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf0}, {0x6f, 0x70},
+		 {0x70, 0x58}, {0x71, 0x58}, {0x72, 0x48}, {0x73, 0x48},
+		 {0x74, 0x38}, {0x75, 0x40}, {0x76, 0x34}, {0x77, 0x34},
+		 {0x78, 0x2e}, {0x79, 0x28}, {0x7a, 0x24}, {0x7b, 0x22},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3c}, {0x7f, 0x58},
+		 {0x80, 0x63}, {0x81, 0x6e}, {0x82, 0x77}, {0x83, 0x80},
+		 {0x84, 0x87}, {0x85, 0x8f}, {0x86, 0x9c}, {0x87, 0xa9},
+		 {0x88, 0xc0}, {0x89, 0xd4}, {0x8a, 0xe6}},
+		{{0x6c, 0xa0}, {0x6d, 0xf0}, {0x6e, 0x90}, {0x6f, 0x80},
+		 {0x70, 0x70}, {0x71, 0x80}, {0x72, 0x60}, {0x73, 0x60},
+		 {0x74, 0x58}, {0x75, 0x60}, {0x76, 0x4c}, {0x77, 0x38},
+		 {0x78, 0x38}, {0x79, 0x2a}, {0x7a, 0x20}, {0x7b, 0x0e},
+		 {0x7c, 0x0a}, {0x7d, 0x14}, {0x7e, 0x26}, {0x7f, 0x46},
+		 {0x80, 0x54}, {0x81, 0x64}, {0x82, 0x70}, {0x83, 0x7c},
+		 {0x84, 0x87}, {0x85, 0x93}, {0x86, 0xa6}, {0x87, 0xb4},
+		 {0x88, 0xd0}, {0x89, 0xe5}, {0x8a, 0xf5}},
+		{{0x6c, 0x60}, {0x6d, 0x80}, {0x6e, 0x60}, {0x6f, 0x80},
+		 {0x70, 0x80}, {0x71, 0x80}, {0x72, 0x88}, {0x73, 0x30},
+		 {0x74, 0x70}, {0x75, 0x68}, {0x76, 0x64}, {0x77, 0x50},
+		 {0x78, 0x3c}, {0x79, 0x22}, {0x7a, 0x10}, {0x7b, 0x08},
+		 {0x7c, 0x06}, {0x7d, 0x0e}, {0x7e, 0x1a}, {0x7f, 0x3a},
+		 {0x80, 0x4a}, {0x81, 0x5a}, {0x82, 0x6b}, {0x83, 0x7b},
+		 {0x84, 0x89}, {0x85, 0x96}, {0x86, 0xaf}, {0x87, 0xc3},
+		 {0x88, 0xe1}, {0x89, 0xf2}, {0x8a, 0xfa}},
+		{{0x6c, 0x20}, {0x6d, 0x40}, {0x6e, 0x20}, {0x6f, 0x60},
+		 {0x70, 0x88}, {0x71, 0xc8}, {0x72, 0xc0}, {0x73, 0xb8},
+		 {0x74, 0xa8}, {0x75, 0xb8}, {0x76, 0x80}, {0x77, 0x5c},
+		 {0x78, 0x26}, {0x79, 0x10}, {0x7a, 0x08}, {0x7b, 0x04},
+		 {0x7c, 0x02}, {0x7d, 0x06}, {0x7e, 0x0a}, {0x7f, 0x22},
+		 {0x80, 0x33}, {0x81, 0x4c}, {0x82, 0x64}, {0x83, 0x7b},
+		 {0x84, 0x90}, {0x85, 0xa7}, {0x86, 0xc7}, {0x87, 0xde},
+		 {0x88, 0xf1}, {0x89, 0xf9}, {0x8a, 0xfd}},
+	};
 
 	val = sd->ctrls[CONTRAST].val;
 	switch (sd->sensor) {
@@ -4163,6 +4520,10 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, 0x64, ctab[val >> 4]);
 		break;
 	    }
+	case SEN_OV7660:
+		write_i2c_regvals(sd, contrast_7660[val],
+					ARRAY_SIZE(contrast_7660[0]));
+		break;
 	case SEN_OV7670:
 		/* check that this isn't just the same as ov7610 */
 		i2c_w(sd, OV7670_R56_CONTRAS, val >> 1);
@@ -4174,6 +4535,18 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals colors_7660[][6] = {
+		{{0x4f, 0x28}, {0x50, 0x2a}, {0x51, 0x02}, {0x52, 0x0a},
+		 {0x53, 0x19}, {0x54, 0x23}},
+		{{0x4f, 0x47}, {0x50, 0x4a}, {0x51, 0x03}, {0x52, 0x11},
+		 {0x53, 0x2c}, {0x54, 0x3e}},
+		{{0x4f, 0x66}, {0x50, 0x6b}, {0x51, 0x05}, {0x52, 0x19},
+		 {0x53, 0x40}, {0x54, 0x59}},
+		{{0x4f, 0x84}, {0x50, 0x8b}, {0x51, 0x06}, {0x52, 0x20},
+		 {0x53, 0x53}, {0x54, 0x73}},
+		{{0x4f, 0xa3}, {0x50, 0xab}, {0x51, 0x08}, {0x52, 0x28},
+		 {0x53, 0x66}, {0x54, 0x8e}},
+	};
 
 	val = sd->ctrls[COLORS].val;
 	switch (sd->sensor) {
@@ -4197,6 +4570,10 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	case SEN_OV7648:
 		i2c_w(sd, OV7610_REG_SAT, val & 0xf0);
 		break;
+	case SEN_OV7660:
+		write_i2c_regvals(sd, colors_7660[val],
+					ARRAY_SIZE(colors_7660[0]));
+		break;
 	case SEN_OV7670:
 		/* supported later once I work out how to do it
 		 * transparently fail now! */
@@ -4214,7 +4591,8 @@ static void setautobright(struct gspca_dev *gspca_dev)
 
 static void setfreq_i(struct sd *sd)
 {
-	if (sd->sensor == SEN_OV7670) {
+	if (sd->sensor == SEN_OV7660
+	 || sd->sensor == SEN_OV7670) {
 		switch (sd->ctrls[FREQ].val) {
 		case 0: /* Banding filter disabled */
 			i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_BFILT);
-- 
cgit v1.2.3


From 101b25b55ec48354bc40b9102b4f7922c9ad9eae Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 5 Nov 2010 00:07:39 -0300
Subject: [media] drivers/media: Use vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ngene/ngene-core.c  | 3 +--
 drivers/media/video/mx3_camera.c      | 3 +--
 drivers/media/video/pwc/pwc-if.c      | 3 +--
 drivers/media/video/videobuf-dma-sg.c | 3 +--
 4 files changed, 4 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 3a7ef71087be..c7809f7da02e 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -1536,12 +1536,11 @@ int __devinit ngene_probe(struct pci_dev *pci_dev,
 	if (pci_enable_device(pci_dev) < 0)
 		return -ENODEV;
 
-	dev = vmalloc(sizeof(struct ngene));
+	dev = vzalloc(sizeof(struct ngene));
 	if (dev == NULL) {
 		stat = -ENOMEM;
 		goto fail0;
 	}
-	memset(dev, 0, sizeof(struct ngene));
 
 	dev->pci_dev = pci_dev;
 	dev->card_info = (struct ngene_info *)id->driver_data;
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index aa871c2936b3..330d42e15498 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -1186,13 +1186,12 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev)
 		goto egetres;
 	}
 
-	mx3_cam = vmalloc(sizeof(*mx3_cam));
+	mx3_cam = vzalloc(sizeof(*mx3_cam));
 	if (!mx3_cam) {
 		dev_err(&pdev->dev, "Could not allocate mx3 camera object\n");
 		err = -ENOMEM;
 		goto ealloc;
 	}
-	memset(mx3_cam, 0, sizeof(*mx3_cam));
 
 	mx3_cam->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(mx3_cam->clk)) {
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index f3dc89da4c4e..b821065e3870 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -287,14 +287,13 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
 	/* create frame buffers, and make circular ring */
 	for (i = 0; i < default_fbufs; i++) {
 		if (pdev->fbuf[i].data == NULL) {
-			kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
+			kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
 			if (kbuf == NULL) {
 				PWC_ERROR("Failed to allocate frame buffer %d.\n", i);
 				return -ENOMEM;
 			}
 			PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf);
 			pdev->fbuf[i].data = kbuf;
-			memset(kbuf, 0, PWC_FRAME_SIZE);
 		}
 	}
 
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 20f227ee2b3e..ab684e807034 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -69,10 +69,9 @@ static struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt,
 	struct page *pg;
 	int i;
 
-	sglist = vmalloc(nr_pages * sizeof(*sglist));
+	sglist = vzalloc(nr_pages * sizeof(*sglist));
 	if (NULL == sglist)
 		return NULL;
-	memset(sglist, 0, nr_pages * sizeof(*sglist));
 	sg_init_table(sglist, nr_pages);
 	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
 		pg = vmalloc_to_page(virt);
-- 
cgit v1.2.3


From 70de39183a8b5ba0a0cd884ff46c1d81dbe939db Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 13 Nov 2010 16:23:06 -0300
Subject: [media] saa7134: use rc-core raw decoders for Encore FM 5.3

Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index fbb2ff171008..4878f4653faf 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -767,9 +767,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV_FM53:
 		ir_codes     = RC_MAP_ENCORE_ENLTV_FM53;
-		mask_keydown = 0x0040000;
-		mask_keycode = 0x00007f;
-		nec_gpio = 1;
+		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
+		mask_keyup   = 0x0040000;
+		mask_keycode = 0xffff;
+		raw_decode   = 1;
 		break;
 	case SAA7134_BOARD_10MOONSTVMASTER3:
 		ir_codes     = RC_MAP_ENCORE_ENLTV;
-- 
cgit v1.2.3


From 6c7e653ff668d939174aa7023736f4a40fd2be08 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 13 Nov 2010 16:19:54 -0300
Subject: [media] saa7134: Remove legacy IR decoding logic inside the module

The only IR left still using the old raw decoders on saa7134 is ENCORE
FM 5.3. As it is now using the standard rc-core raw decoders, lots
of old code can be removed from saa7134.

Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 219 +---------------------------
 drivers/media/video/saa7134/saa7134.h       |   2 +-
 2 files changed, 3 insertions(+), 218 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 4878f4653faf..72562b8cf3be 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -54,11 +54,8 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
 
-/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
-static int saa7134_rc5_irq(struct saa7134_dev *dev);
-static int saa7134_nec_irq(struct saa7134_dev *dev);
+/* Helper function for raw decoding at GPIO16 or GPIO18 */
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
-static void nec_task(unsigned long data);
 
 /* -------------------- GPIO generic keycode builder -------------------- */
 
@@ -397,12 +394,8 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 	if (!ir->running)
 		return;
 
-	if (ir->nec_gpio) {
-		saa7134_nec_irq(dev);
-	} else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) {
+	if (!ir->polling && !ir->raw_decode) {
 		build_key(dev);
-	} else if (ir->rc5_gpio) {
-		saa7134_rc5_irq(dev);
 	} else if (ir->raw_decode) {
 		saa7134_raw_decode_irq(dev);
 	}
@@ -448,17 +441,6 @@ static int __saa7134_ir_start(void *priv)
 			    (unsigned long)dev);
 		ir->timer.expires  = jiffies + HZ;
 		add_timer(&ir->timer);
-	} else if (ir->rc5_gpio) {
-		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
-		ir->timer_end.data = (unsigned long)ir;
-		ir->shift_by = 2;
-		ir->start = 0x2;
-		ir->addr = 0x17;
-		ir->rc5_remote_gap = ir_rc5_remote_gap;
-	} else if (ir->nec_gpio) {
-		tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
@@ -486,10 +468,6 @@ static void __saa7134_ir_stop(void *priv)
 		return;
 	if (dev->remote->polling)
 		del_timer_sync(&dev->remote->timer);
-	else if (ir->rc5_gpio)
-		del_timer_sync(&ir->timer_end);
-	else if (ir->nec_gpio)
-		tasklet_kill(&ir->tlet);
 	else if (ir->raw_decode) {
 		del_timer_sync(&ir->timer_end);
 		ir->active = 0;
@@ -531,40 +509,6 @@ static void saa7134_ir_close(struct rc_dev *rc)
 		__saa7134_ir_stop(dev);
 }
 
-
-static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
-{
-	struct saa7134_dev *dev = rc->priv;
-	struct card_ir *ir = dev->remote;
-	u32 nec_gpio, rc5_gpio;
-
-	if (ir_type == IR_TYPE_RC5) {
-		dprintk("Changing protocol to RC5\n");
-		nec_gpio = 0;
-		rc5_gpio = 1;
-	} else if (ir_type == IR_TYPE_NEC) {
-		dprintk("Changing protocol to NEC\n");
-		nec_gpio = 1;
-		rc5_gpio = 0;
-	} else {
-		dprintk("IR protocol type %ud is not supported\n",
-			(unsigned)ir_type);
-		return -EINVAL;
-	}
-
-	if (ir->running) {
-		saa7134_ir_stop(dev);
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-		saa7134_ir_start(dev);
-	} else {
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-	}
-
-	return 0;
-}
-
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
 	struct card_ir *ir;
@@ -574,10 +518,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
 	int polling      = 0;
-	int rc5_gpio	 = 0;
-	int nec_gpio	 = 0;
 	int raw_decode   = 0;
-	int allow_protocol_change = 0;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -830,8 +771,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->mask_keydown = mask_keydown;
 	ir->mask_keyup   = mask_keyup;
 	ir->polling      = polling;
-	ir->rc5_gpio	 = rc5_gpio;
-	ir->nec_gpio	 = nec_gpio;
 	ir->raw_decode	 = raw_decode;
 
 	/* init input device */
@@ -846,11 +785,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	if (raw_decode)
 		rc->driver_type = RC_DRIVER_IR_RAW;
 
-	if (!raw_decode && allow_protocol_change) {
-		rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-		rc->change_protocol = saa7134_ir_change_protocol;
-	}
-
 	rc->input_name = ir->name;
 	rc->input_phys = ir->phys;
 	rc->input_id.bustype = BUS_PCI;
@@ -1024,152 +958,3 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 
 	return 1;
 }
-
-static int saa7134_rc5_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-	struct timeval tv;
-	u32 gap;
-	unsigned long current_jiffies, timeout;
-
-	/* get time of bit */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* active code => add bit */
-	if (ir->active) {
-		/* only if in the code (otherwise spurious IRQ or timer
-		   late) */
-		if (ir->last_bit < 28) {
-			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
-			    ir_rc5_remote_gap;
-			ir->code |= 1 << ir->last_bit;
-		}
-		/* starting new code */
-	} else {
-		ir->active = 1;
-		ir->code = 0;
-		ir->base_time = tv;
-		ir->last_bit = 0;
-
-		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
-		mod_timer(&ir->timer_end, timeout);
-	}
-
-	return 1;
-}
-
-static void nec_task(unsigned long data)
-{
-	struct saa7134_dev *dev = (struct saa7134_dev *) data;
-	struct card_ir *ir;
-	struct timeval tv;
-	int count, pulse, oldpulse, gap;
-	u32 ircode = 0, not_code = 0;
-	int ngap = 0;
-
-	if (!data) {
-		printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
-		/* GPIO will be kept disabled */
-		return;
-	}
-
-	ir = dev->remote;
-
-	/* rising SAA7134_GPIO_GPRESCAN reads the status */
-	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-
-	oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
-	pulse = oldpulse;
-
-	do_gettimeofday(&tv);
-	ir->base_time = tv;
-
-	/* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
-	   Unfortunately, using IRQ to decode pulse didn't work, since it uses
-	   a pulse train of 38KHz. This means one pulse on each 52 us
-	 */
-	do {
-		/* Wait until the end of pulse/space or 5 ms */
-		for (count = 0; count < 500; count++)  {
-			udelay(10);
-			/* rising SAA7134_GPIO_GPRESCAN reads the status */
-			saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
-				& ir->mask_keydown;
-			if (pulse != oldpulse)
-				break;
-		}
-
-		do_gettimeofday(&tv);
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-				tv.tv_usec - ir->base_time.tv_usec;
-
-		if (!pulse) {
-			/* Bit 0 has 560 us, while bit 1 has 1120 us.
-			   Do something only if bit == 1
-			 */
-			if (ngap && (gap > 560 + 280)) {
-				unsigned int shift = ngap - 1;
-
-				/* Address first, then command */
-				if (shift < 8) {
-					shift += 8;
-					ircode |= 1 << shift;
-				} else if (shift < 16) {
-					not_code |= 1 << shift;
-				} else if (shift < 24) {
-					shift -= 16;
-					ircode |= 1 << shift;
-				} else {
-					shift -= 24;
-					not_code |= 1 << shift;
-				}
-			}
-			ngap++;
-		}
-
-
-		ir->base_time = tv;
-
-		/* TIMEOUT - Long pulse */
-		if (gap >= 5000)
-			break;
-		oldpulse = pulse;
-	} while (ngap < 32);
-
-	if (ngap == 32) {
-		/* FIXME: should check if not_code == ~ircode */
-		ir->code = ir_extract_bits(ircode, ir->mask_keycode);
-
-		dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
-			 ir->code, ircode, not_code);
-
-		ir_keydown(ir->dev, ir->code, 0);
-	} else {
-		dprintk("Repeat last key\n");
-		ir_repeat(ir->dev);
-	}
-
-	saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-}
-
-static int saa7134_nec_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-
-	saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-	tasklet_schedule(&ir->tlet);
-
-	return 1;
-}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 4e37b8bfb6fa..a6c726fe4c5d 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>
-- 
cgit v1.2.3


From 8ea43d0a2f87b8460f46ddb7b42b5eb17c5385d2 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 13 Nov 2010 16:49:10 -0300
Subject: [media] rc: Remove ir-common module

Now, just one old bttv board uses the old RC5 raw decoding routines.
Its conversion to rc-core requires the generation of IRQ data for both
positive and negative transitions at the IRQ line. I'm not sure if
bttv driver supports it or if the transitions will be reliable enough.
So, due to the lack of hardware for testing, the better for now is to
just move the legacy routines to bttv driver, and wait for someone with
a Nebula Digi could help to port it to use also rc-core raw decoders.

Acked-by: Hermann Pitton <hermann-pitton@arcor.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 226 +++++++++++++++++++++++++++-
 drivers/media/video/saa7134/saa7134.h       |   2 +-
 2 files changed, 221 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 72562b8cf3be..fbb2ff171008 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -54,8 +54,11 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
 
-/* Helper function for raw decoding at GPIO16 or GPIO18 */
+/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
+static int saa7134_rc5_irq(struct saa7134_dev *dev);
+static int saa7134_nec_irq(struct saa7134_dev *dev);
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
+static void nec_task(unsigned long data);
 
 /* -------------------- GPIO generic keycode builder -------------------- */
 
@@ -394,8 +397,12 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 	if (!ir->running)
 		return;
 
-	if (!ir->polling && !ir->raw_decode) {
+	if (ir->nec_gpio) {
+		saa7134_nec_irq(dev);
+	} else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) {
 		build_key(dev);
+	} else if (ir->rc5_gpio) {
+		saa7134_rc5_irq(dev);
 	} else if (ir->raw_decode) {
 		saa7134_raw_decode_irq(dev);
 	}
@@ -441,6 +448,17 @@ static int __saa7134_ir_start(void *priv)
 			    (unsigned long)dev);
 		ir->timer.expires  = jiffies + HZ;
 		add_timer(&ir->timer);
+	} else if (ir->rc5_gpio) {
+		/* set timer_end for code completion */
+		init_timer(&ir->timer_end);
+		ir->timer_end.function = ir_rc5_timer_end;
+		ir->timer_end.data = (unsigned long)ir;
+		ir->shift_by = 2;
+		ir->start = 0x2;
+		ir->addr = 0x17;
+		ir->rc5_remote_gap = ir_rc5_remote_gap;
+	} else if (ir->nec_gpio) {
+		tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
@@ -468,6 +486,10 @@ static void __saa7134_ir_stop(void *priv)
 		return;
 	if (dev->remote->polling)
 		del_timer_sync(&dev->remote->timer);
+	else if (ir->rc5_gpio)
+		del_timer_sync(&ir->timer_end);
+	else if (ir->nec_gpio)
+		tasklet_kill(&ir->tlet);
 	else if (ir->raw_decode) {
 		del_timer_sync(&ir->timer_end);
 		ir->active = 0;
@@ -509,6 +531,40 @@ static void saa7134_ir_close(struct rc_dev *rc)
 		__saa7134_ir_stop(dev);
 }
 
+
+static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
+{
+	struct saa7134_dev *dev = rc->priv;
+	struct card_ir *ir = dev->remote;
+	u32 nec_gpio, rc5_gpio;
+
+	if (ir_type == IR_TYPE_RC5) {
+		dprintk("Changing protocol to RC5\n");
+		nec_gpio = 0;
+		rc5_gpio = 1;
+	} else if (ir_type == IR_TYPE_NEC) {
+		dprintk("Changing protocol to NEC\n");
+		nec_gpio = 1;
+		rc5_gpio = 0;
+	} else {
+		dprintk("IR protocol type %ud is not supported\n",
+			(unsigned)ir_type);
+		return -EINVAL;
+	}
+
+	if (ir->running) {
+		saa7134_ir_stop(dev);
+		ir->nec_gpio = nec_gpio;
+		ir->rc5_gpio = rc5_gpio;
+		saa7134_ir_start(dev);
+	} else {
+		ir->nec_gpio = nec_gpio;
+		ir->rc5_gpio = rc5_gpio;
+	}
+
+	return 0;
+}
+
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
 	struct card_ir *ir;
@@ -518,7 +574,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
 	int polling      = 0;
+	int rc5_gpio	 = 0;
+	int nec_gpio	 = 0;
 	int raw_decode   = 0;
+	int allow_protocol_change = 0;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -708,10 +767,9 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV_FM53:
 		ir_codes     = RC_MAP_ENCORE_ENLTV_FM53;
-		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
-		mask_keyup   = 0x0040000;
-		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		mask_keydown = 0x0040000;
+		mask_keycode = 0x00007f;
+		nec_gpio = 1;
 		break;
 	case SAA7134_BOARD_10MOONSTVMASTER3:
 		ir_codes     = RC_MAP_ENCORE_ENLTV;
@@ -771,6 +829,8 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->mask_keydown = mask_keydown;
 	ir->mask_keyup   = mask_keyup;
 	ir->polling      = polling;
+	ir->rc5_gpio	 = rc5_gpio;
+	ir->nec_gpio	 = nec_gpio;
 	ir->raw_decode	 = raw_decode;
 
 	/* init input device */
@@ -785,6 +845,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	if (raw_decode)
 		rc->driver_type = RC_DRIVER_IR_RAW;
 
+	if (!raw_decode && allow_protocol_change) {
+		rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+		rc->change_protocol = saa7134_ir_change_protocol;
+	}
+
 	rc->input_name = ir->name;
 	rc->input_phys = ir->phys;
 	rc->input_id.bustype = BUS_PCI;
@@ -958,3 +1023,152 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 
 	return 1;
 }
+
+static int saa7134_rc5_irq(struct saa7134_dev *dev)
+{
+	struct card_ir *ir = dev->remote;
+	struct timeval tv;
+	u32 gap;
+	unsigned long current_jiffies, timeout;
+
+	/* get time of bit */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* active code => add bit */
+	if (ir->active) {
+		/* only if in the code (otherwise spurious IRQ or timer
+		   late) */
+		if (ir->last_bit < 28) {
+			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+			    ir_rc5_remote_gap;
+			ir->code |= 1 << ir->last_bit;
+		}
+		/* starting new code */
+	} else {
+		ir->active = 1;
+		ir->code = 0;
+		ir->base_time = tv;
+		ir->last_bit = 0;
+
+		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+		mod_timer(&ir->timer_end, timeout);
+	}
+
+	return 1;
+}
+
+static void nec_task(unsigned long data)
+{
+	struct saa7134_dev *dev = (struct saa7134_dev *) data;
+	struct card_ir *ir;
+	struct timeval tv;
+	int count, pulse, oldpulse, gap;
+	u32 ircode = 0, not_code = 0;
+	int ngap = 0;
+
+	if (!data) {
+		printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
+		/* GPIO will be kept disabled */
+		return;
+	}
+
+	ir = dev->remote;
+
+	/* rising SAA7134_GPIO_GPRESCAN reads the status */
+	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+	oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
+	pulse = oldpulse;
+
+	do_gettimeofday(&tv);
+	ir->base_time = tv;
+
+	/* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
+	   Unfortunately, using IRQ to decode pulse didn't work, since it uses
+	   a pulse train of 38KHz. This means one pulse on each 52 us
+	 */
+	do {
+		/* Wait until the end of pulse/space or 5 ms */
+		for (count = 0; count < 500; count++)  {
+			udelay(10);
+			/* rising SAA7134_GPIO_GPRESCAN reads the status */
+			saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+			saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+			pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
+				& ir->mask_keydown;
+			if (pulse != oldpulse)
+				break;
+		}
+
+		do_gettimeofday(&tv);
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+				tv.tv_usec - ir->base_time.tv_usec;
+
+		if (!pulse) {
+			/* Bit 0 has 560 us, while bit 1 has 1120 us.
+			   Do something only if bit == 1
+			 */
+			if (ngap && (gap > 560 + 280)) {
+				unsigned int shift = ngap - 1;
+
+				/* Address first, then command */
+				if (shift < 8) {
+					shift += 8;
+					ircode |= 1 << shift;
+				} else if (shift < 16) {
+					not_code |= 1 << shift;
+				} else if (shift < 24) {
+					shift -= 16;
+					ircode |= 1 << shift;
+				} else {
+					shift -= 24;
+					not_code |= 1 << shift;
+				}
+			}
+			ngap++;
+		}
+
+
+		ir->base_time = tv;
+
+		/* TIMEOUT - Long pulse */
+		if (gap >= 5000)
+			break;
+		oldpulse = pulse;
+	} while (ngap < 32);
+
+	if (ngap == 32) {
+		/* FIXME: should check if not_code == ~ircode */
+		ir->code = ir_extract_bits(ircode, ir->mask_keycode);
+
+		dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
+			 ir->code, ircode, not_code);
+
+		ir_keydown(ir->dev, ir->code, 0);
+	} else {
+		dprintk("Repeat last key\n");
+		ir_repeat(ir->dev);
+	}
+
+	saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+}
+
+static int saa7134_nec_irq(struct saa7134_dev *dev)
+{
+	struct card_ir *ir = dev->remote;
+
+	saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+	tasklet_schedule(&ir->tlet);
+
+	return 1;
+}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index a6c726fe4c5d..4e37b8bfb6fa 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>
-- 
cgit v1.2.3


From 13d28e4917fb6cf6898e8998f01ab83b3f468aeb Mon Sep 17 00:00:00 2001
From: Matthias Schwarzott <zzam@gentoo.org>
Date: Sun, 7 Nov 2010 10:57:13 -0300
Subject: [media] IX2505V: i2c transfer error code ignored

It seems that ix2505v driver ignores a i2c error in ix2505v_read_status_reg.
This looks like a typing error using (ret = 1) instead of correct (ret == 1).

Acked-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/ix2505v.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c
index 55f2eba7bc96..6360c681ded9 100644
--- a/drivers/media/dvb/frontends/ix2505v.c
+++ b/drivers/media/dvb/frontends/ix2505v.c
@@ -72,7 +72,7 @@ static int ix2505v_read_status_reg(struct ix2505v_state *state)
 	ret = i2c_transfer(state->i2c, msg, 1);
 	deb_i2c("Read %s ", __func__);
 
-	return (ret = 1) ? (int) b2[0] : -1;
+	return (ret == 1) ? (int) b2[0] : -1;
 }
 
 static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
-- 
cgit v1.2.3


From 9eae42e5a216059a146b3fbbe24b4fdc0b10c723 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Richard=20R=C3=B6jfors?= <richard.rojfors@pelagicore.com>
Date: Mon, 8 Nov 2010 10:45:44 -0300
Subject: [media] media: Add timberdale video-in driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds the timberdale video-in driver.

The video IP of timberdale delivers the video data via DMA.
The driver uses the DMA api to handle DMA transfers, and make use
of the V4L2 video buffers to handle buffers against user space.

If available the driver uses an encoder to get/set the video standard

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig     |   9 +
 drivers/media/video/Makefile    |   1 +
 drivers/media/video/timblogiw.c | 894 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 904 insertions(+)
 create mode 100644 drivers/media/video/timblogiw.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 22feac4d1e8f..73962d601bf3 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -666,6 +666,15 @@ config VIDEO_HEXIUM_GEMINI
 	  To compile this driver as a module, choose M here: the
 	  module will be called hexium_gemini.
 
+config VIDEO_TIMBERDALE
+	tristate "Support for timberdale Video In/LogiWIN"
+	depends on VIDEO_V4L2 && I2C
+	select TIMB_DMA
+	select VIDEO_ADV7180
+	select VIDEOBUF_DMA_CONTIG
+	---help---
+	Add support for the Video In peripherial of the timberdale FPGA.
+
 source "drivers/media/video/cx88/Kconfig"
 
 source "drivers/media/video/cx23885/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index af79d476a4c8..482f14b3ff84 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
 obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
+obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
new file mode 100644
index 000000000000..bddcdb6ffef5
--- /dev/null
+++ b/drivers/media/video/timblogiw.c
@@ -0,0 +1,894 @@
+/*
+ * timblogiw.c timberdale FPGA LogiWin Video In driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA LogiWin Video In
+ */
+
+#include <linux/version.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/timb_video.h>
+
+#define DRIVER_NAME			"timb-video"
+
+#define TIMBLOGIWIN_NAME		"Timberdale Video-In"
+#define TIMBLOGIW_VERSION_CODE		0x04
+
+#define TIMBLOGIW_LINES_PER_DESC	44
+#define TIMBLOGIW_MAX_VIDEO_MEM		16
+
+#define TIMBLOGIW_HAS_DECODER(lw)	(lw->pdata.encoder.module_name)
+
+
+struct timblogiw {
+	struct video_device		video_dev;
+	struct v4l2_device		v4l2_dev; /* mutual exclusion */
+	struct mutex			lock;
+	struct device			*dev;
+	struct timb_video_platform_data pdata;
+	struct v4l2_subdev		*sd_enc;	/* encoder */
+	bool				opened;
+};
+
+struct timblogiw_tvnorm {
+	v4l2_std_id std;
+	u16     width;
+	u16     height;
+	u8	fps;
+};
+
+struct timblogiw_fh {
+	struct videobuf_queue		vb_vidq;
+	struct timblogiw_tvnorm const	*cur_norm;
+	struct list_head		capture;
+	struct dma_chan			*chan;
+	spinlock_t			queue_lock; /* mutual exclusion */
+	unsigned int			frame_count;
+};
+
+struct timblogiw_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer	vb;
+	struct scatterlist	sg[16];
+	dma_cookie_t		cookie;
+	struct timblogiw_fh	*fh;
+};
+
+const struct timblogiw_tvnorm timblogiw_tvnorms[] = {
+	{
+		.std			= V4L2_STD_PAL,
+		.width			= 720,
+		.height			= 576,
+		.fps			= 25
+	},
+	{
+		.std			= V4L2_STD_NTSC,
+		.width			= 720,
+		.height			= 480,
+		.fps			= 30
+	}
+};
+
+static int timblogiw_bytes_per_line(const struct timblogiw_tvnorm *norm)
+{
+	return norm->width * 2;
+}
+
+
+static int timblogiw_frame_size(const struct timblogiw_tvnorm *norm)
+{
+	return norm->height * timblogiw_bytes_per_line(norm);
+}
+
+static const struct timblogiw_tvnorm *timblogiw_get_norm(const v4l2_std_id std)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
+		if (timblogiw_tvnorms[i].std & std)
+			return timblogiw_tvnorms + i;
+
+	/* default to first element */
+	return timblogiw_tvnorms;
+}
+
+static void timblogiw_dma_cb(void *data)
+{
+	struct timblogiw_buffer *buf = data;
+	struct timblogiw_fh *fh = buf->fh;
+	struct videobuf_buffer *vb = &buf->vb;
+
+	spin_lock(&fh->queue_lock);
+
+	/* mark the transfer done */
+	buf->cookie = -1;
+
+	fh->frame_count++;
+
+	if (vb->state != VIDEOBUF_ERROR) {
+		list_del(&vb->queue);
+		do_gettimeofday(&vb->ts);
+		vb->field_count = fh->frame_count * 2;
+		vb->state = VIDEOBUF_DONE;
+
+		wake_up(&vb->done);
+	}
+
+	if (!list_empty(&fh->capture)) {
+		vb = list_entry(fh->capture.next, struct videobuf_buffer,
+			queue);
+		vb->state = VIDEOBUF_ACTIVE;
+	}
+
+	spin_unlock(&fh->queue_lock);
+}
+
+static bool timblogiw_dma_filter_fn(struct dma_chan *chan, void *filter_param)
+{
+	return chan->chan_id == (int)filter_param;
+}
+
+/* IOCTL functions */
+
+static int timblogiw_g_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n", __func__);
+
+	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	mutex_lock(&lw->lock);
+
+	format->fmt.pix.width = fh->cur_norm->width;
+	format->fmt.pix.height = fh->cur_norm->height;
+	format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	format->fmt.pix.bytesperline = timblogiw_bytes_per_line(fh->cur_norm);
+	format->fmt.pix.sizeimage = timblogiw_frame_size(fh->cur_norm);
+	format->fmt.pix.field = V4L2_FIELD_NONE;
+
+	mutex_unlock(&lw->lock);
+
+	return 0;
+}
+
+static int timblogiw_try_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct v4l2_pix_format *pix = &format->fmt.pix;
+
+	dev_dbg(&vdev->dev,
+		"%s - width=%d, height=%d, pixelformat=%d, field=%d\n"
+		"bytes per line %d, size image: %d, colorspace: %d\n",
+		__func__,
+		pix->width, pix->height, pix->pixelformat, pix->field,
+		pix->bytesperline, pix->sizeimage, pix->colorspace);
+
+	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (pix->field != V4L2_FIELD_NONE)
+		return -EINVAL;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int timblogiw_s_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+	struct v4l2_pix_format *pix = &format->fmt.pix;
+	int err;
+
+	mutex_lock(&lw->lock);
+
+	err = timblogiw_try_fmt(file, priv, format);
+	if (err)
+		goto out;
+
+	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
+		dev_err(&vdev->dev, "%s queue busy\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	pix->width = fh->cur_norm->width;
+	pix->height = fh->cur_norm->height;
+
+out:
+	mutex_unlock(&lw->lock);
+	return err;
+}
+
+static int timblogiw_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *cap)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+	memset(cap, 0, sizeof(*cap));
+	strncpy(cap->card, TIMBLOGIWIN_NAME, sizeof(cap->card)-1);
+	strncpy(cap->driver, DRIVER_NAME, sizeof(cap->card)-1);
+	strlcpy(cap->bus_info, vdev->name, sizeof(cap->bus_info));
+	cap->version = TIMBLOGIW_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+		V4L2_CAP_READWRITE;
+
+	return 0;
+}
+
+static int timblogiw_enum_fmt(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s, index: %d\n",  __func__, fmt->index);
+
+	if (fmt->index != 0)
+		return -EINVAL;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = 0;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	strncpy(fmt->description, "4:2:2, packed, YUYV",
+		sizeof(fmt->description)-1);
+	fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	return 0;
+}
+
+static int timblogiw_g_parm(struct file *file, void *priv,
+	struct v4l2_streamparm *sp)
+{
+	struct timblogiw_fh *fh = priv;
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	cp->timeperframe.numerator = 1;
+	cp->timeperframe.denominator = fh->cur_norm->fps;
+
+	return 0;
+}
+
+static int timblogiw_reqbufs(struct file *file, void  *priv,
+	struct v4l2_requestbuffers *rb)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_reqbufs(&fh->vb_vidq, rb);
+}
+
+static int timblogiw_querybuf(struct file *file, void  *priv,
+	struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_querybuf(&fh->vb_vidq, b);
+}
+
+static int timblogiw_qbuf(struct file *file, void  *priv, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_qbuf(&fh->vb_vidq, b);
+}
+
+static int timblogiw_dqbuf(struct file *file, void  *priv,
+	struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+}
+
+static int timblogiw_g_std(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	*std = fh->cur_norm->std;
+	return 0;
+}
+
+static int timblogiw_s_std(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+	int err = 0;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	mutex_lock(&lw->lock);
+
+	if (TIMBLOGIW_HAS_DECODER(lw))
+		err = v4l2_subdev_call(lw->sd_enc, core, s_std, *std);
+
+	if (!err)
+		fh->cur_norm = timblogiw_get_norm(*std);
+
+	mutex_unlock(&lw->lock);
+
+	return err;
+}
+
+static int timblogiw_enuminput(struct file *file, void  *priv,
+	struct v4l2_input *inp)
+{
+	struct video_device *vdev = video_devdata(file);
+	int i;
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	if (inp->index != 0)
+		return -EINVAL;
+
+	memset(inp, 0, sizeof(*inp));
+	inp->index = 0;
+
+	strncpy(inp->name, "Timb input 1", sizeof(inp->name) - 1);
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+
+	inp->std = 0;
+	for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
+		inp->std |= timblogiw_tvnorms[i].std;
+
+	return 0;
+}
+
+static int timblogiw_g_input(struct file *file, void  *priv,
+	unsigned int *input)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	*input = 0;
+
+	return 0;
+}
+
+static int timblogiw_s_input(struct file *file, void  *priv, unsigned int input)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	if (input != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int timblogiw_streamon(struct file *file, void  *priv, unsigned int type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		dev_dbg(&vdev->dev, "%s - No capture device\n", __func__);
+		return -EINVAL;
+	}
+
+	fh->frame_count = 0;
+	return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int timblogiw_streamoff(struct file *file, void  *priv,
+	unsigned int type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n",  __func__);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamoff(&fh->vb_vidq);
+}
+
+static int timblogiw_querystd(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n",  __func__);
+
+	if (TIMBLOGIW_HAS_DECODER(lw))
+		return v4l2_subdev_call(lw->sd_enc, video, querystd, std);
+	else {
+		*std = fh->cur_norm->std;
+		return 0;
+	}
+}
+
+static int timblogiw_enum_framesizes(struct file *file, void  *priv,
+	struct v4l2_frmsizeenum *fsize)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s - index: %d, format: %d\n",  __func__,
+		fsize->index, fsize->pixel_format);
+
+	if ((fsize->index != 0) ||
+		(fsize->pixel_format != V4L2_PIX_FMT_UYVY))
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete.width = fh->cur_norm->width;
+	fsize->discrete.height = fh->cur_norm->height;
+
+	return 0;
+}
+
+/* Video buffer functions */
+
+static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
+	unsigned int *size)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+
+	*size = timblogiw_frame_size(fh->cur_norm);
+
+	if (!*count)
+		*count = 32;
+
+	while (*size * *count > TIMBLOGIW_MAX_VIDEO_MEM * 1024 * 1024)
+		(*count)--;
+
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+	enum v4l2_field field)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+	unsigned int data_size = timblogiw_frame_size(fh->cur_norm);
+	int err = 0;
+
+	if (vb->baddr && vb->bsize < data_size)
+		/* User provided buffer, but it is too small */
+		return -ENOMEM;
+
+	vb->size = data_size;
+	vb->width = fh->cur_norm->width;
+	vb->height = fh->cur_norm->height;
+	vb->field = field;
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		int i;
+		unsigned int size;
+		unsigned int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
+			timblogiw_bytes_per_line(fh->cur_norm);
+		dma_addr_t addr;
+
+		sg_init_table(buf->sg, ARRAY_SIZE(buf->sg));
+
+		err = videobuf_iolock(vq, vb, NULL);
+		if (err)
+			goto err;
+
+		addr = videobuf_to_dma_contig(vb);
+		for (i = 0, size = 0; size < data_size; i++) {
+			sg_dma_address(buf->sg + i) = addr + size;
+			size += bytes_per_desc;
+			sg_dma_len(buf->sg + i) = (size > data_size) ?
+				(bytes_per_desc - (size - data_size)) :
+				bytes_per_desc;
+		}
+
+		vb->state = VIDEOBUF_PREPARED;
+		buf->cookie = -1;
+		buf->fh = fh;
+	}
+
+	return 0;
+
+err:
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+	return err;
+}
+
+static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+	struct dma_async_tx_descriptor *desc;
+	int sg_elems;
+	int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
+		timblogiw_bytes_per_line(fh->cur_norm);
+
+	sg_elems = timblogiw_frame_size(fh->cur_norm) / bytes_per_desc;
+	sg_elems +=
+		(timblogiw_frame_size(fh->cur_norm) % bytes_per_desc) ? 1 : 0;
+
+	if (list_empty(&fh->capture))
+		vb->state = VIDEOBUF_ACTIVE;
+	else
+		vb->state = VIDEOBUF_QUEUED;
+
+	list_add_tail(&vb->queue, &fh->capture);
+
+	spin_unlock_irq(&fh->queue_lock);
+
+	desc = fh->chan->device->device_prep_slave_sg(fh->chan,
+		buf->sg, sg_elems, DMA_FROM_DEVICE,
+		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
+	if (!desc) {
+		spin_lock_irq(&fh->queue_lock);
+		list_del_init(&vb->queue);
+		vb->state = VIDEOBUF_PREPARED;
+		return;
+	}
+
+	desc->callback_param = buf;
+	desc->callback = timblogiw_dma_cb;
+
+	buf->cookie = desc->tx_submit(desc);
+
+	spin_lock_irq(&fh->queue_lock);
+}
+
+static void buffer_release(struct videobuf_queue *vq,
+	struct videobuf_buffer *vb)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+
+	videobuf_waiton(vq, vb, 0, 0);
+	if (buf->cookie >= 0)
+		dma_sync_wait(fh->chan, buf->cookie);
+
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops timblogiw_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+};
+
+/* Device Operations functions */
+
+static int timblogiw_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh;
+	v4l2_std_id std;
+	dma_cap_mask_t mask;
+	int err = 0;
+
+	dev_dbg(&vdev->dev, "%s: entry\n", __func__);
+
+	mutex_lock(&lw->lock);
+	if (lw->opened) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (TIMBLOGIW_HAS_DECODER(lw) && !lw->sd_enc) {
+		struct i2c_adapter *adapt;
+
+		/* find the video decoder */
+		adapt = i2c_get_adapter(lw->pdata.i2c_adapter);
+		if (!adapt) {
+			dev_err(&vdev->dev, "No I2C bus #%d\n",
+				lw->pdata.i2c_adapter);
+			err = -ENODEV;
+			goto out;
+		}
+
+		/* now find the encoder */
+		lw->sd_enc = v4l2_i2c_new_subdev_board(&lw->v4l2_dev, adapt,
+			lw->pdata.encoder.info, NULL);
+
+		i2c_put_adapter(adapt);
+
+		if (!lw->sd_enc) {
+			dev_err(&vdev->dev, "Failed to get encoder: %s\n",
+				lw->pdata.encoder.module_name);
+			err = -ENODEV;
+			goto out;
+		}
+	}
+
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (!fh) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	fh->cur_norm = timblogiw_tvnorms;
+	timblogiw_querystd(file, fh, &std);
+	fh->cur_norm = timblogiw_get_norm(std);
+
+	INIT_LIST_HEAD(&fh->capture);
+	spin_lock_init(&fh->queue_lock);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_PRIVATE, mask);
+
+	/* find the DMA channel */
+	fh->chan = dma_request_channel(mask, timblogiw_dma_filter_fn,
+			(void *)lw->pdata.dma_channel);
+	if (!fh->chan) {
+		dev_err(&vdev->dev, "Failed to get DMA channel\n");
+		kfree(fh);
+		err = -ENODEV;
+		goto out;
+	}
+
+	file->private_data = fh;
+	videobuf_queue_dma_contig_init(&fh->vb_vidq,
+		&timblogiw_video_qops, lw->dev, &fh->queue_lock,
+		V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
+		sizeof(struct timblogiw_buffer), fh, NULL);
+
+	lw->opened = true;
+out:
+	mutex_unlock(&lw->lock);
+
+	return err;
+}
+
+static int timblogiw_close(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	videobuf_stop(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vidq);
+
+	dma_release_channel(fh->chan);
+
+	kfree(fh);
+
+	mutex_lock(&lw->lock);
+	lw->opened = false;
+	mutex_unlock(&lw->lock);
+	return 0;
+}
+
+static ssize_t timblogiw_read(struct file *file, char __user *data,
+	size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0,
+		file->f_flags & O_NONBLOCK);
+}
+
+static unsigned int timblogiw_poll(struct file *file,
+	struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_poll_stream(file, &fh->vb_vidq, wait);
+}
+
+static int timblogiw_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n", __func__);
+
+	return videobuf_mmap_mapper(&fh->vb_vidq, vma);
+}
+
+/* Platform device functions */
+
+static const __devinitdata struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
+	.vidioc_querycap		= timblogiw_querycap,
+	.vidioc_enum_fmt_vid_cap	= timblogiw_enum_fmt,
+	.vidioc_g_fmt_vid_cap		= timblogiw_g_fmt,
+	.vidioc_try_fmt_vid_cap		= timblogiw_try_fmt,
+	.vidioc_s_fmt_vid_cap		= timblogiw_s_fmt,
+	.vidioc_g_parm			= timblogiw_g_parm,
+	.vidioc_reqbufs			= timblogiw_reqbufs,
+	.vidioc_querybuf		= timblogiw_querybuf,
+	.vidioc_qbuf			= timblogiw_qbuf,
+	.vidioc_dqbuf			= timblogiw_dqbuf,
+	.vidioc_g_std			= timblogiw_g_std,
+	.vidioc_s_std			= timblogiw_s_std,
+	.vidioc_enum_input		= timblogiw_enuminput,
+	.vidioc_g_input			= timblogiw_g_input,
+	.vidioc_s_input			= timblogiw_s_input,
+	.vidioc_streamon		= timblogiw_streamon,
+	.vidioc_streamoff		= timblogiw_streamoff,
+	.vidioc_querystd		= timblogiw_querystd,
+	.vidioc_enum_framesizes		= timblogiw_enum_framesizes,
+};
+
+static const __devinitdata struct v4l2_file_operations timblogiw_fops = {
+	.owner		= THIS_MODULE,
+	.open		= timblogiw_open,
+	.release	= timblogiw_close,
+	.unlocked_ioctl		= video_ioctl2, /* V4L2 ioctl handler */
+	.mmap		= timblogiw_mmap,
+	.read		= timblogiw_read,
+	.poll		= timblogiw_poll,
+};
+
+static const __devinitdata struct video_device timblogiw_template = {
+	.name		= TIMBLOGIWIN_NAME,
+	.fops		= &timblogiw_fops,
+	.ioctl_ops	= &timblogiw_ioctl_ops,
+	.release	= video_device_release_empty,
+	.minor		= -1,
+	.tvnorms	= V4L2_STD_PAL | V4L2_STD_NTSC
+};
+
+static int __devinit timblogiw_probe(struct platform_device *pdev)
+{
+	int err;
+	struct timblogiw *lw = NULL;
+	struct timb_video_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	if (!pdata->encoder.module_name)
+		dev_info(&pdev->dev, "Running without decoder\n");
+
+	lw = kzalloc(sizeof(*lw), GFP_KERNEL);
+	if (!lw) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	if (pdev->dev.parent)
+		lw->dev = pdev->dev.parent;
+	else
+		lw->dev = &pdev->dev;
+
+	memcpy(&lw->pdata, pdata, sizeof(lw->pdata));
+
+	mutex_init(&lw->lock);
+
+	lw->video_dev = timblogiw_template;
+
+	strlcpy(lw->v4l2_dev.name, DRIVER_NAME, sizeof(lw->v4l2_dev.name));
+	err = v4l2_device_register(NULL, &lw->v4l2_dev);
+	if (err)
+		goto err_register;
+
+	lw->video_dev.v4l2_dev = &lw->v4l2_dev;
+
+	platform_set_drvdata(pdev, lw);
+	video_set_drvdata(&lw->video_dev, lw);
+
+	err = video_register_device(&lw->video_dev, VFL_TYPE_GRABBER, 0);
+	if (err) {
+		dev_err(&pdev->dev, "Error reg video: %d\n", err);
+		goto err_request;
+	}
+
+
+	return 0;
+
+err_request:
+	platform_set_drvdata(pdev, NULL);
+	v4l2_device_unregister(&lw->v4l2_dev);
+err_register:
+	kfree(lw);
+err:
+	dev_err(&pdev->dev, "Failed to register: %d\n", err);
+
+	return err;
+}
+
+static int __devexit timblogiw_remove(struct platform_device *pdev)
+{
+	struct timblogiw *lw = platform_get_drvdata(pdev);
+
+	video_unregister_device(&lw->video_dev);
+
+	v4l2_device_unregister(&lw->v4l2_dev);
+
+	kfree(lw);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver timblogiw_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= timblogiw_probe,
+	.remove		= __devexit_p(timblogiw_remove),
+};
+
+/* Module functions */
+
+static int __init timblogiw_init(void)
+{
+	return platform_driver_register(&timblogiw_platform_driver);
+}
+
+static void __exit timblogiw_exit(void)
+{
+	platform_driver_unregister(&timblogiw_platform_driver);
+}
+
+module_init(timblogiw_init);
+module_exit(timblogiw_exit);
+
+MODULE_DESCRIPTION(TIMBLOGIWIN_NAME);
+MODULE_AUTHOR("Pelagicore AB <info@pelagicore.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
-- 
cgit v1.2.3


From 9c0147b6941e082f52dcbb9688d0e6e5f359744f Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 24 Nov 2010 16:41:09 -0300
Subject: [media] timblogiw: fix kconfig & build error

timblogiw uses dma() interfaces and it selects TIMB_DMA for that
support.  However, drivers/dma/ is not built unless
CONFIG_DMA_ENGINE is enabled, so select/enable that symbol also.

drivers/built-in.o: In function `timblogiw_close':
timblogiw.c:(.text+0x4419fe): undefined reference to `dma_release_channel'
drivers/built-in.o: In function `buffer_release':
timblogiw.c:(.text+0x441a8d): undefined reference to `dma_sync_wait'
drivers/built-in.o: In function `timblogiw_open':
timblogiw.c:(.text+0x44212b): undefined reference to `__dma_request_channel'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 73962d601bf3..963b3e6c4a97 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -669,6 +669,7 @@ config VIDEO_HEXIUM_GEMINI
 config VIDEO_TIMBERDALE
 	tristate "Support for timberdale Video In/LogiWIN"
 	depends on VIDEO_V4L2 && I2C
+	select DMA_ENGINE
 	select TIMB_DMA
 	select VIDEO_ADV7180
 	select VIDEOBUF_DMA_CONTIG
-- 
cgit v1.2.3


From 9a9dcb4a19c29ec01e7d249e3dae2d589af86480 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Mon, 8 Nov 2010 20:08:41 -0300
Subject: [media] cx231xx-417: Remove unnecessary casts of void ptr returning
 alloc function return values

Hi,

The [vk][cmz]alloc(_node) family of functions return void pointers which
it's completely unnecessary/pointless to cast to other pointer types since
that happens implicitly.

This patch removes such casts from drivers/media/

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-417.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c
index 4c7cac3b6254..fc9526a5b746 100644
--- a/drivers/media/video/cx231xx/cx231xx-417.c
+++ b/drivers/media/video/cx231xx/cx231xx-417.c
@@ -940,14 +940,14 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
 	u16 _buffer_size = 4096;
 	u8 *p_buffer;
 
-	p_current_fw = (u32 *)vmalloc(1884180*4);
+	p_current_fw = vmalloc(1884180 * 4);
 	p_fw = p_current_fw;
 	if (p_current_fw == 0) {
 		dprintk(2, "FAIL!!!\n");
 		return -1;
 	}
 
-	p_buffer = (u8 *)vmalloc(4096);
+	p_buffer = vmalloc(4096);
 	if (p_buffer == 0) {
 		dprintk(2, "FAIL!!!\n");
 		return -1;
-- 
cgit v1.2.3


From c0ff9f4c24a2571943c0d0991c2cb9ac90dc1915 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 10 Nov 2010 11:14:13 -0300
Subject: [media] media: video: do not clear 'driver' from an i2c_client

The i2c-core does this already.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/imx074.c     | 2 +-
 drivers/media/video/mt9m001.c    | 1 -
 drivers/media/video/mt9m111.c    | 1 -
 drivers/media/video/mt9t031.c    | 1 -
 drivers/media/video/mt9v022.c    | 1 -
 drivers/media/video/rj54n1cb0c.c | 1 -
 6 files changed, 1 insertion(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 27b5dfdfbb93..b9c91c1839f8 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -467,7 +467,7 @@ static int imx074_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	client->driver = NULL;
+	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 
 	return 0;
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index fcb4cd941853..f7fc88d240e6 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -798,7 +798,6 @@ static int mt9m001_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9m001_video_remove(icd);
-	client->driver = NULL;
 	kfree(mt9m001);
 
 	return 0;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 525a16e73285..53fa2a7bf156 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -1092,7 +1092,6 @@ static int mt9m111_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	client->driver = NULL;
 	kfree(mt9m111);
 
 	return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 9bd44a816ea1..7ce279c3751d 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -896,7 +896,6 @@ static int mt9t031_remove(struct i2c_client *client)
 
 	if (icd)
 		icd->ops = NULL;
-	client->driver = NULL;
 	kfree(mt9t031);
 
 	return 0;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index b96171cc79f9..6a784c87e5ff 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -930,7 +930,6 @@ static int mt9v022_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9v022_video_remove(icd);
-	client->driver = NULL;
 	kfree(mt9v022);
 
 	return 0;
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index d2fa2d43ff19..57e11b6f19fb 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -1460,7 +1460,6 @@ static int rj54n1_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	client->driver = NULL;
 	kfree(rj54n1);
 
 	return 0;
-- 
cgit v1.2.3


From e6f199f3e7e10112adfa80700ecc00b056b5a62e Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 10 Nov 2010 09:28:19 -0300
Subject: [media] i2c: Remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit. This is obsolete meanwhile, so fix it and hope the word will spread.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/imx074.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index b9c91c1839f8..1a1169115716 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -467,7 +467,6 @@ static int imx074_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 
 	return 0;
-- 
cgit v1.2.3


From 116d588ea21cf0278a4de1e3272e9c3220a647e7 Mon Sep 17 00:00:00 2001
From: Manu Abraham <abraham.manu@gmail.com>
Date: Thu, 11 Feb 2010 04:11:05 -0300
Subject: [media] Mantis, hopper: use MODULE_DEVICE_TABLE
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

use the macro to make modules auto-loadable

Thanks to Ozan Çağlayan <ozan@pardus.org.tr> for pointing it out

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/mantis/hopper_cards.c | 2 ++
 drivers/media/dvb/mantis/mantis_cards.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 09e9fc785189..70e73afefb3d 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -251,6 +251,8 @@ static struct pci_device_id hopper_pci_table[] = {
 	{ }
 };
 
+MODULE_DEVICE_TABLE(pci, hopper_pci_table);
+
 static struct pci_driver hopper_pci_driver = {
 	.name		= DRIVER_NAME,
 	.id_table	= hopper_pci_table,
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index cf4b39ffdaad..40da225098cc 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -281,6 +281,8 @@ static struct pci_device_id mantis_pci_table[] = {
 	{ }
 };
 
+MODULE_DEVICE_TABLE(pci, mantis_pci_table);
+
 static struct pci_driver mantis_pci_driver = {
 	.name		= DRIVER_NAME,
 	.id_table	= mantis_pci_table,
-- 
cgit v1.2.3


From 9c81496a88b04206d0607b23b298b6529da1fcb0 Mon Sep 17 00:00:00 2001
From: Marko Ristola <marko.ristola@kolumbus.fi>
Date: Sun, 14 Nov 2010 14:09:04 -0300
Subject: [media] Mantis: append tasklet maintenance for DVB stream delivery

After dvb-core has called mantis-fe->stop_feed(dvbdmxfeed)
the last time (count to zero), no data should ever be copied
with dvb_dmx_swfilter() by a tasklet: the target structure
might be in an unusable state. Caller of mantis_fe->stop_feed()
assumes that feeding is stopped after stop_feed() has been
called, ie. dvb_dmx_swfilter() isn't running, and won't be called.

There is a risk that dvb_dmx_swfilter() references freed resources
(memory or spinlocks or ???) causing instabilities. Thus
tasklet_disable(&mantis->tasklet) must be called inside of
mantis-fe->stop_feed(dvbdmxfeed) when necessary.

Signed-off-by: Marko Ristola <marko.ristola@kolumbus.fi>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/mantis/mantis_dvb.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
index 99d82eec3b03..a9864f7134e1 100644
--- a/drivers/media/dvb/mantis/mantis_dvb.c
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -117,6 +117,7 @@ static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 	if (mantis->feeds == 1)	 {
 		dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
 		mantis_dma_start(mantis);
+		tasklet_enable(&mantis->tasklet);
 	}
 
 	return mantis->feeds;
@@ -136,6 +137,7 @@ static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 	mantis->feeds--;
 	if (mantis->feeds == 0) {
 		dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+		tasklet_disable(&mantis->tasklet);
 		mantis_dma_stop(mantis);
 	}
 
@@ -216,6 +218,7 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis)
 
 	dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
 	tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+	tasklet_disable(&mantis->tasklet);
 	if (mantis->hwconfig) {
 		result = config->frontend_init(mantis, mantis->fe);
 		if (result < 0) {
-- 
cgit v1.2.3


From a22407faba57c3624beea1a9fad7cbdcf5a19a1a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>
Date: Sun, 14 Nov 2010 14:24:36 -0300
Subject: [media] Mantis: use dvb_attach to avoid double dereferencing on
 module removal
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Convert the driver to use the dvb_attach macro to avoid the hard dependency
on the frontend drivers.  The hard dependecy will result in loading a
number of unused frontends, and unwanted automatic dereferencing.

This fixes a bug where unloading the mantis driver will derefence any
attached frontend twice, which will cause an oops if the same frontend is
used by another driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/mantis/hopper_vp3028.c | 2 +-
 drivers/media/dvb/mantis/mantis_vp1033.c | 2 +-
 drivers/media/dvb/mantis/mantis_vp1034.c | 2 +-
 drivers/media/dvb/mantis/mantis_vp1041.c | 6 +++---
 drivers/media/dvb/mantis/mantis_vp2033.c | 4 ++--
 drivers/media/dvb/mantis/mantis_vp2040.c | 4 ++--
 drivers/media/dvb/mantis/mantis_vp3030.c | 4 ++--
 7 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
index 96674c78e86b..567ed24f2de3 100644
--- a/drivers/media/dvb/mantis/hopper_vp3028.c
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -57,7 +57,7 @@ static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	if (err == 0) {
 		msleep(250);
 		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = zl10353_attach(&hopper_vp3028_config, adapter);
+		fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter);
 
 		if (!fe)
 			return -1;
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
index 4a723bda0031..deec927c7f7a 100644
--- a/drivers/media/dvb/mantis/mantis_vp1033.c
+++ b/drivers/media/dvb/mantis/mantis_vp1033.c
@@ -173,7 +173,7 @@ static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
-		fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+		fe = dvb_attach(stv0299_attach, &lgtdqcs001f_config, adapter);
 
 		if (fe) {
 			fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
index 8e6ae558ee57..bf62338a1745 100644
--- a/drivers/media/dvb/mantis/mantis_vp1034.c
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -82,7 +82,7 @@ static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
-		fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+		fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
 		if (fe) {
 			dprintk(MANTIS_ERROR, 1,
 			"found MB86A16 DVB-S/DSS frontend @0x%02x",
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index d1aa2bc0c155..38a436ca2fdf 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -316,14 +316,14 @@ static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	if (err == 0) {
 		mantis_frontend_soft_reset(mantis);
 		msleep(250);
-		mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+		mantis->fe = dvb_attach(stb0899_attach, &vp1041_stb0899_config, adapter);
 		if (mantis->fe) {
 			dprintk(MANTIS_ERROR, 1,
 				"found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
 				vp1041_stb0899_config.demod_address);
 
-			if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
-				if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+			if (dvb_attach(stb6100_attach, mantis->fe, &vp1041_stb6100_config, adapter)) {
+				if (!dvb_attach(lnbp21_attach, mantis->fe, adapter, 0, 0))
 					dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
 			}
 		} else {
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
index 10ce81790a8c..06da0ddf05a7 100644
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -132,7 +132,7 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+		fe = dvb_attach(tda10021_attach, &vp2033_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
@@ -141,7 +141,7 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2033_tda1002x_cu1216_config.demod_address);
 		} else {
-			fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+			fe = dvb_attach(tda10023_attach, &vp2033_tda10023_cu1216_config,
 					     adapter,
 					     read_pwm(mantis));
 
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
index a7ca233e800b..f72b137b7652 100644
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -132,7 +132,7 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+		fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
@@ -141,7 +141,7 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2040_tda1002x_cu1216_config.demod_address);
 		} else {
-			fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+			fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config,
 					     adapter,
 					     read_pwm(mantis));
 
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
index 1f4334214953..be4d87c04149 100644
--- a/drivers/media/dvb/mantis/mantis_vp3030.c
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -68,12 +68,12 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	if (err == 0) {
 		msleep(250);
 		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = zl10353_attach(&mantis_vp3030_config, adapter);
+		fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);
 
 		if (!fe)
 			return -1;
 
-		tda665x_attach(fe, &env57h12d5_config, adapter);
+		dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
 	} else {
 		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
 			adapter->name,
-- 
cgit v1.2.3


From 3037fd14302d635426996fb7f6fcf7cb98dc15b9 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 14 Nov 2010 14:56:00 -0300
Subject: [media] Mantis: Rename gpio_set_bits to mantis_gpio_set_bits

This function is declared extern and exported, and should not be given
a generic name which may conflict with gpiolib in future.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/mantis/hopper_vp3028.c |  4 ++--
 drivers/media/dvb/mantis/mantis_dvb.c    | 14 +++++++-------
 drivers/media/dvb/mantis/mantis_ioc.c    |  4 ++--
 drivers/media/dvb/mantis/mantis_ioc.h    |  2 +-
 drivers/media/dvb/mantis/mantis_vp1034.c |  8 ++++----
 drivers/media/dvb/mantis/mantis_vp3030.c |  4 ++--
 6 files changed, 18 insertions(+), 18 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
index 567ed24f2de3..68a29f8bdf73 100644
--- a/drivers/media/dvb/mantis/hopper_vp3028.c
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -47,11 +47,11 @@ static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	err = mantis_frontend_power(mantis, POWER_ON);
 	if (err == 0) {
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
index a9864f7134e1..e5180e45d310 100644
--- a/drivers/media/dvb/mantis/mantis_dvb.c
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -47,15 +47,15 @@ int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
 	switch (power) {
 	case POWER_ON:
 		dprintk(MANTIS_DEBUG, 1, "Power ON");
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
 		break;
 
 	case POWER_OFF:
 		dprintk(MANTIS_DEBUG, 1, "Power OFF");
-		gpio_set_bits(mantis, config->power, POWER_OFF);
+		mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
 		msleep(100);
 		break;
 
@@ -73,13 +73,13 @@ void mantis_frontend_soft_reset(struct mantis_pci *mantis)
 	struct mantis_hwconfig *config = mantis->hwconfig;
 
 	dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
 
 	return;
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
index fe31cfb0b158..479086dbb9a8 100644
--- a/drivers/media/dvb/mantis/mantis_ioc.c
+++ b/drivers/media/dvb/mantis/mantis_ioc.c
@@ -75,7 +75,7 @@ int mantis_get_mac(struct mantis_pci *mantis)
 EXPORT_SYMBOL_GPL(mantis_get_mac);
 
 /* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 {
 	u32 cur;
 
@@ -90,7 +90,7 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
 	mmwrite(0x00, MANTIS_GPIF_DOUT);
 }
-EXPORT_SYMBOL_GPL(gpio_set_bits);
+EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
 
 int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
 {
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
index 188fe5a81614..d56e002b2955 100644
--- a/drivers/media/dvb/mantis/mantis_ioc.h
+++ b/drivers/media/dvb/mantis/mantis_ioc.h
@@ -44,7 +44,7 @@ enum mantis_stream_control {
 };
 
 extern int mantis_get_mac(struct mantis_pci *mantis);
-extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
 
 extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
 
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
index bf62338a1745..26bc0cbe84d4 100644
--- a/drivers/media/dvb/mantis/mantis_vp1034.c
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -50,13 +50,13 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 0);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 0);
 		break;
 	case SEC_VOLTAGE_18:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 1);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 1);
 		break;
 	case SEC_VOLTAGE_OFF:
 		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
index be4d87c04149..c09308cd3ac6 100644
--- a/drivers/media/dvb/mantis/mantis_vp3030.c
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -59,11 +59,11 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	if (err == 0) {
 		msleep(250);
-- 
cgit v1.2.3


From f14bfe94e459cb070a489e1786f26d54e9e7b5de Mon Sep 17 00:00:00 2001
From: Manu Abraham <abraham.manu@gmail.com>
Date: Sun, 14 Nov 2010 15:52:10 -0300
Subject: [media] stb6100: Improve tuner performance

- Reduce the amount of white noise present, which causes the
  demodulator a significant time to acquire a frontend lock
  on a whole. Frontend shows a large significant improvement in
  performance.

Thanks to Peter Nayler for helping to identify the potential
hotspots and fixing them.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/stb6100.c | 193 ++++++++++++++++++++++------------
 1 file changed, 127 insertions(+), 66 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index 80a9e4cba631..db66248fed46 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -51,7 +51,7 @@ module_param(verbose, int, 0644);
 		if (x > y)								\
 			printk(format, ##arg);						\
 	}										\
-} while(0)
+} while (0)
 
 struct stb6100_lkup {
 	u32 val_low;
@@ -157,13 +157,25 @@ static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
 	u8 regs[STB6100_NUMREGS];
 	int rc;
 
+	struct i2c_msg msg = {
+		.addr	= state->config->tuner_address + reg,
+		.flags	= I2C_M_RD,
+		.buf	= regs,
+		.len	= 1
+	};
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+
 	if (unlikely(reg >= STB6100_NUMREGS)) {
 		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
 		return -EINVAL;
 	}
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
-		return rc;
-	return (unsigned int)regs[reg];
+	if (unlikely(verbose > FE_DEBUG)) {
+		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
+		dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[reg], regs[0]);
+	}
+
+	return (unsigned int)regs[0];
 }
 
 static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
@@ -211,20 +223,17 @@ static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
 	return stb6100_write_reg_range(state, &data, reg, 1);
 }
 
-static int stb6100_write_regs(struct stb6100_state *state, u8 regs[])
-{
-	stb6100_normalise_regs(regs);
-	return stb6100_write_reg_range(state, &regs[1], 1, STB6100_NUMREGS - 1);
-}
 
 static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
 {
 	int rc;
 	struct stb6100_state *state = fe->tuner_priv;
 
-	if ((rc = stb6100_read_reg(state, STB6100_LD)) < 0)
+	rc = stb6100_read_reg(state, STB6100_LD);
+	if (rc < 0) {
+		dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
 		return rc;
-
+	}
 	return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
 }
 
@@ -234,7 +243,8 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 	u8 f;
 	struct stb6100_state *state = fe->tuner_priv;
 
-	if ((rc = stb6100_read_reg(state, STB6100_F)) < 0)
+	rc = stb6100_read_reg(state, STB6100_F);
+	if (rc < 0)
 		return rc;
 	f = rc & STB6100_F_F;
 
@@ -265,14 +275,21 @@ static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
 	/* Turn on LPF bandwidth setting clock control,
 	 * set bandwidth, wait 10ms, turn off.
 	 */
-	if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK)) < 0)
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
+	if (rc < 0)
 		return rc;
-	if ((rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp)) < 0)
+	rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
+	if (rc < 0)
 		return rc;
-	msleep(1);
-	if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d)) < 0)
+
+	msleep(5);  /*  This is dangerous as another (related) thread may start */
+
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
+	if (rc < 0)
 		return rc;
 
+	msleep(10);  /*  This is dangerous as another (related) thread may start */
+
 	return 0;
 }
 
@@ -284,7 +301,8 @@ static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 	struct stb6100_state *state = fe->tuner_priv;
 	u8 regs[STB6100_NUMREGS];
 
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
+	rc = stb6100_read_regs(state, regs);
+	if (rc < 0)
 		return rc;
 
 	odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
@@ -312,8 +330,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 	u8 regs[STB6100_NUMREGS];
 	u8 g, psd2, odiv;
 
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
-		return rc;
+	dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
 
 	if (fe->ops.get_frontend) {
 		dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
@@ -321,96 +338,140 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 	}
 	srate = p.u.qpsk.symbol_rate;
 
-	regs[STB6100_DLB] = 0xdc;
-	/* Disable LPEN */
-	regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL Loop disabled */
+	/* Set up tuner cleanly, LPF calibration on */
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
+	if (rc < 0)
+		return rc;  /* allow LPF calibration */
 
-	if ((rc = stb6100_write_regs(state, regs)) < 0)
+	/* PLL Loop disabled, bias on, VCO on, synth on */
+	regs[STB6100_LPEN] = 0xeb;
+	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
+	if (rc < 0)
 		return rc;
 
-	/* Baseband gain.	*/
-	if (srate >= 15000000)
-		g = 9;  //  +4 dB
-	else if (srate >= 5000000)
-		g = 11; //  +8 dB
-	else
-		g = 14; // +14 dB
-
-	regs[STB6100_G] = (regs[STB6100_G] & ~STB6100_G_G) | g;
-	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
-	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
+	/* Program the registers with their data values */
 
 	/* VCO divide ratio (LO divide ratio, VCO prescaler enable).	*/
 	if (frequency <= 1075000)
 		odiv = 1;
 	else
 		odiv = 0;
-	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_ODIV) | (odiv << STB6100_VCO_ODIV_SHIFT);
 
-	if ((frequency > 1075000) && (frequency <= 1325000))
-		psd2 = 0;
-	else
-		psd2 = 1;
-	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
+	/* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
+	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 
 	/* OSM	*/
 	for (ptr = lkup;
 	     (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
 	     ptr++);
+
 	if (ptr->val_high == 0) {
 		printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
 		return -EINVAL;
 	}
 	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
+		return rc;
 
+	if ((frequency > 1075000) && (frequency <= 1325000))
+		psd2 = 0;
+	else
+		psd2 = 1;
 	/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4)			*/
 	fvco = frequency << (1 + odiv);
 	/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1)))	*/
 	nint = fvco / (state->reference << psd2);
 	/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9	*/
 	nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
-					 << (9 - psd2),
-				  state->reference);
+					 << (9 - psd2), state->reference);
+
+	/* NI */
+	regs[STB6100_NI] = nint;
+	rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
+	if (rc < 0)
+		return rc;
+
+	/* NF */
+	regs[STB6100_NF_LSB] = nfrac;
+	rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
+	if (rc < 0)
+		return rc;
+
+	/* K */
+	regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
+	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
+	rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
+	if (rc < 0)
+		return rc;
+
+	/* G Baseband gain. */
+	if (srate >= 15000000)
+		g = 9;  /*  +4 dB */
+	else if (srate >= 5000000)
+		g = 11; /*  +8 dB */
+	else
+		g = 14; /* +14 dB */
+
+	regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
+	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
+	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
+	rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
+	if (rc < 0)
+		return rc;
+
+	/* F we don't write as it is set up in BW set */
+
+	/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
+	regs[STB6100_DLB] = 0xcc;
+	rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
+	if (rc < 0)
+		return rc;
+
 	dprintk(verbose, FE_DEBUG, 1,
 		"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
 		frequency, srate, (unsigned int)g, (unsigned int)odiv,
 		(unsigned int)psd2, state->reference,
 		ptr->reg, fvco, nint, nfrac);
-	regs[STB6100_NI] = nint;
-	regs[STB6100_NF_LSB] = nfrac;
-	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
-	regs[STB6100_VCO] |= STB6100_VCO_OSCH;		/* VCO search enabled		*/
-	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* VCO search clock off		*/
-	regs[STB6100_FCCK] |= STB6100_FCCK_FCCK;	/* LPF BW setting clock enabled	*/
-	regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN;	/* PLL loop disabled		*/
-	/* Power up. */
-	regs[STB6100_LPEN] |= STB6100_LPEN_SYNP	| STB6100_LPEN_OSCP | STB6100_LPEN_BEN;
 
-	msleep(2);
-	if ((rc = stb6100_write_regs(state, regs)) < 0)
+	/* Set up the test registers */
+	regs[STB6100_TEST1] = 0x8f;
+	rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
+	if (rc < 0)
+		return rc;
+	regs[STB6100_TEST3] = 0xde;
+	rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
+	if (rc < 0)
 		return rc;
 
-	msleep(2);
-	regs[STB6100_LPEN] |= STB6100_LPEN_LPEN;	/* PLL loop enabled		*/
-	if ((rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN])) < 0)
+	/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
+	regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
+	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
+	if (rc < 0)
 		return rc;
 
+	msleep(2);
+
+	/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
 	regs[STB6100_VCO] &= ~STB6100_VCO_OCK;		/* VCO fast search		*/
-	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
 		return rc;
 
-	msleep(10);					/* wait for LO to lock		*/
+	msleep(10);  /*  This is dangerous as another (related) thread may start */ /* wait for LO to lock */
+
 	regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;		/* vco search disabled		*/
 	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* search clock off		*/
-	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
-		return rc;
-	regs[STB6100_FCCK] &= ~STB6100_FCCK_FCCK;       /* LPF BW clock disabled	*/
-	stb6100_normalise_regs(regs);
-	if ((rc = stb6100_write_reg_range(state, &regs[1], 1, STB6100_NUMREGS - 3)) < 0)
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
 		return rc;
 
-	msleep(100);
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
+	if (rc < 0)
+		return rc;  /* Stop LPF calibration */
 
+	msleep(10);  /*  This is dangerous as another (related) thread may start */
+		     /* wait for stabilisation, (should not be necessary)		*/
 	return 0;
 }
 
@@ -433,8 +494,8 @@ static int stb6100_init(struct dvb_frontend *fe)
 	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
 	state->reference	= status->refclock / 1000;	/* kHz	*/
 
-	/* Set default bandwidth.	*/
-	return stb6100_set_bandwidth(fe, state->bandwidth);
+	/* Set default bandwidth. Modified, PN 13-May-10	*/
+	return 0;
 }
 
 static int stb6100_get_state(struct dvb_frontend *fe,
-- 
cgit v1.2.3


From 1697c8dfba72fd182d670a68dca157f64dd3b1f2 Mon Sep 17 00:00:00 2001
From: Manu Abraham <abraham.manu@gmail.com>
Date: Sun, 14 Nov 2010 16:01:47 -0300
Subject: [media] stb0899: fix diseqc messages getting lost

- Some badly written applications in conjuction with certain SEC devices
  do send too many messages causing the DiSEqC bus to get congested. As
  a result, the end devices do get confused and hence do not respond.
  The issue was found by Julian Scheel.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/stb0899_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index 8e38fcee564e..37a222d9ddb3 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -714,7 +714,7 @@ static int stb0899_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_ma
 	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
 	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0);
 	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-
+	msleep(100);
 	return 0;
 }
 
-- 
cgit v1.2.3


From bce8d0fe4af4b3a1e46e66cd6116d6389ad0cc22 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 09:58:09 -0300
Subject: [media] rc: remove ir-common module
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Something weird happened with commit 740069e6e043403199dbe2b42256722fb814f6ae.
Instead of dong the right thing, it got somehow corrupted and reverted the
rc changes.

Thanks to David Härdeman for pointing me about the problem.

This patch should be merged with 740069e6e04 before sending upstream.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Kconfig                    |   5 -
 drivers/media/rc/Makefile                   |   2 -
 drivers/media/rc/ir-functions.c             | 120 ---------------
 drivers/media/video/bt8xx/Kconfig           |   2 +-
 drivers/media/video/bt8xx/bttv-input.c      | 105 ++++++++++++-
 drivers/media/video/saa7134/Kconfig         |   2 +-
 drivers/media/video/saa7134/saa7134-input.c | 226 +---------------------------
 drivers/media/video/saa7134/saa7134.h       |   2 +-
 8 files changed, 108 insertions(+), 356 deletions(-)
 delete mode 100644 drivers/media/rc/ir-functions.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 2d1546889c9b..ef19375899ec 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -10,11 +10,6 @@ menuconfig IR_CORE
 	  if you don't need IR, as otherwise, you may not be able to
 	  compile the driver for your adapter.
 
-config IR_LEGACY
-	tristate
-	depends on IR_CORE
-	default IR_CORE
-
 if IR_CORE
 
 config LIRC
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 859c12cc03ff..8c0e4cb19551 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,10 +1,8 @@
-ir-common-objs  := ir-functions.o
 rc-core-objs	:= rc-main.o rc-raw.o
 
 obj-y += keymaps/
 
 obj-$(CONFIG_IR_CORE) += rc-core.o
-obj-$(CONFIG_IR_LEGACY) += ir-common.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/rc/ir-functions.c b/drivers/media/rc/ir-functions.c
deleted file mode 100644
index 14397d0541d8..000000000000
--- a/drivers/media/rc/ir-functions.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * some common functions to handle infrared remote protocol decoding for
- * drivers which have not yet been (or can't be) converted to use the
- * regular protocol decoders...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-#include <media/ir-common.h>
-#include "rc-core-priv.h"
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-/* RC5 decoding stuff, moved from bttv-input.c to share it with
- * saa7134 */
-
-/* decode raw bit pattern to RC5 code */
-static u32 ir_rc5_decode(unsigned int code)
-{
-	unsigned int org_code = code;
-	unsigned int pair;
-	unsigned int rc5 = 0;
-	int i;
-
-	for (i = 0; i < 14; ++i) {
-		pair = code & 0x3;
-		code >>= 2;
-
-		rc5 <<= 1;
-		switch (pair) {
-		case 0:
-		case 2:
-			break;
-		case 1:
-			rc5 |= 1;
-			break;
-		case 3:
-			IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
-			return 0;
-		}
-	}
-	IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
-		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-	return rc5;
-}
-
-void ir_rc5_timer_end(unsigned long data)
-{
-	struct card_ir *ir = (struct card_ir *)data;
-	struct timeval tv;
-	unsigned long current_jiffies;
-	u32 gap;
-	u32 rc5 = 0;
-
-	/* get time */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* signal we're ready to start a new code */
-	ir->active = 0;
-
-	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
-	if (gap < 28000) {
-		IR_dprintk(1, "ir-common: spurious timer_end\n");
-		return;
-	}
-
-	if (ir->last_bit < 20) {
-		/* ignore spurious codes (caused by light/other remotes) */
-		IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
-	} else {
-		ir->code = (ir->code << ir->shift_by) | 1;
-		rc5 = ir_rc5_decode(ir->code);
-
-		/* two start bits? */
-		if (RC5_START(rc5) != ir->start) {
-			IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
-
-			/* right address? */
-		} else if (RC5_ADDR(rc5) == ir->addr) {
-			u32 toggle = RC5_TOGGLE(rc5);
-			u32 instr = RC5_INSTR(rc5);
-
-			/* Good code */
-			ir_keydown(ir->dev, instr, toggle);
-			IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
-				   instr, toggle);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 659e44873440..3c7c0a572c45 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_BT848
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on IR_LEGACY
+	depends on IR_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 4b4f6137c6c5..e8f60ab58db6 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -140,7 +140,100 @@ static void bttv_input_timer(unsigned long data)
 	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
 }
 
-/* ---------------------------------------------------------------*/
+/*
+ * FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
+ * on the rc-core way. As we need to be sure that both IRQ transitions are
+ * properly triggered, Better to touch it only with this hardware for
+ * testing.
+ */
+
+/* decode raw bit pattern to RC5 code */
+static u32 bttv_rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+		break;
+		case 3:
+			dprintk(KERN_INFO DEVNAME ":rc5_decode(%x) bad code\n",
+				org_code);
+			return 0;
+		}
+	}
+	dprintk(KERN_INFO DEVNAME ":"
+		"code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+void bttv_rc5_timer_end(unsigned long data)
+{
+	struct card_ir *ir = (struct card_ir *)data;
+	struct timeval tv;
+	unsigned long current_jiffies;
+	u32 gap;
+	u32 rc5 = 0;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* signal we're ready to start a new code */
+	ir->active = 0;
+
+	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		dprintk(KERN_INFO DEVNAME ": spurious timer_end\n");
+		return;
+	}
+
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		dprintk(KERN_INFO DEVNAME ": short code: %x\n", ir->code);
+	} else {
+		ir->code = (ir->code << ir->shift_by) | 1;
+		rc5 = bttv_rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != ir->start) {
+			printk(KERN_INFO DEVNAME ":"
+			       " rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == ir->addr) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code */
+			ir_keydown(ir->dev, instr, toggle);
+			dprintk(KERN_INFO DEVNAME ":"
+				" instruction %x, toggle %x\n",
+				instr, toggle);
+		}
+	}
+}
 
 static int bttv_rc5_irq(struct bttv *btv)
 {
@@ -206,7 +299,7 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
+		ir->timer_end.function = bttv_rc5_timer_end;
 		ir->timer_end.data = (unsigned long)ir;
 		ir->shift_by = 1;
 		ir->start = 3;
@@ -283,10 +376,10 @@ void __devinit init_bttv_i2c_ir(struct bttv *btv)
 	default:
 		/*
 		 * The external IR receiver is at i2c address 0x34 (0x35 for
-                 * reads).  Future Hauppauge cards will have an internal
-                 * receiver at 0x30 (0x31 for reads).  In theory, both can be
-                 * fitted, and Hauppauge suggest an external overrides an
-                 * internal.
+		 * reads).  Future Hauppauge cards will have an internal
+		 * receiver at 0x30 (0x31 for reads).  In theory, both can be
+		 * fitted, and Hauppauge suggest an external overrides an
+		 * internal.
 		 * That's why we probe 0x1a (~0x34) first. CB
 		 */
 
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 32a95a2d66a1..e03bff9e4246 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
 
 config VIDEO_SAA7134_RC
 	bool "Philips SAA7134 Remote Controller support"
-	depends on IR_LEGACY
+	depends on IR_CORE
 	depends on VIDEO_SAA7134
 	default y
 	---help---
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index fbb2ff171008..72562b8cf3be 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -54,11 +54,8 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
 
-/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
-static int saa7134_rc5_irq(struct saa7134_dev *dev);
-static int saa7134_nec_irq(struct saa7134_dev *dev);
+/* Helper function for raw decoding at GPIO16 or GPIO18 */
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
-static void nec_task(unsigned long data);
 
 /* -------------------- GPIO generic keycode builder -------------------- */
 
@@ -397,12 +394,8 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 	if (!ir->running)
 		return;
 
-	if (ir->nec_gpio) {
-		saa7134_nec_irq(dev);
-	} else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) {
+	if (!ir->polling && !ir->raw_decode) {
 		build_key(dev);
-	} else if (ir->rc5_gpio) {
-		saa7134_rc5_irq(dev);
 	} else if (ir->raw_decode) {
 		saa7134_raw_decode_irq(dev);
 	}
@@ -448,17 +441,6 @@ static int __saa7134_ir_start(void *priv)
 			    (unsigned long)dev);
 		ir->timer.expires  = jiffies + HZ;
 		add_timer(&ir->timer);
-	} else if (ir->rc5_gpio) {
-		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
-		ir->timer_end.data = (unsigned long)ir;
-		ir->shift_by = 2;
-		ir->start = 0x2;
-		ir->addr = 0x17;
-		ir->rc5_remote_gap = ir_rc5_remote_gap;
-	} else if (ir->nec_gpio) {
-		tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
@@ -486,10 +468,6 @@ static void __saa7134_ir_stop(void *priv)
 		return;
 	if (dev->remote->polling)
 		del_timer_sync(&dev->remote->timer);
-	else if (ir->rc5_gpio)
-		del_timer_sync(&ir->timer_end);
-	else if (ir->nec_gpio)
-		tasklet_kill(&ir->tlet);
 	else if (ir->raw_decode) {
 		del_timer_sync(&ir->timer_end);
 		ir->active = 0;
@@ -531,40 +509,6 @@ static void saa7134_ir_close(struct rc_dev *rc)
 		__saa7134_ir_stop(dev);
 }
 
-
-static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
-{
-	struct saa7134_dev *dev = rc->priv;
-	struct card_ir *ir = dev->remote;
-	u32 nec_gpio, rc5_gpio;
-
-	if (ir_type == IR_TYPE_RC5) {
-		dprintk("Changing protocol to RC5\n");
-		nec_gpio = 0;
-		rc5_gpio = 1;
-	} else if (ir_type == IR_TYPE_NEC) {
-		dprintk("Changing protocol to NEC\n");
-		nec_gpio = 1;
-		rc5_gpio = 0;
-	} else {
-		dprintk("IR protocol type %ud is not supported\n",
-			(unsigned)ir_type);
-		return -EINVAL;
-	}
-
-	if (ir->running) {
-		saa7134_ir_stop(dev);
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-		saa7134_ir_start(dev);
-	} else {
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-	}
-
-	return 0;
-}
-
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
 	struct card_ir *ir;
@@ -574,10 +518,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
 	int polling      = 0;
-	int rc5_gpio	 = 0;
-	int nec_gpio	 = 0;
 	int raw_decode   = 0;
-	int allow_protocol_change = 0;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -767,9 +708,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV_FM53:
 		ir_codes     = RC_MAP_ENCORE_ENLTV_FM53;
-		mask_keydown = 0x0040000;
-		mask_keycode = 0x00007f;
-		nec_gpio = 1;
+		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
+		mask_keyup   = 0x0040000;
+		mask_keycode = 0xffff;
+		raw_decode   = 1;
 		break;
 	case SAA7134_BOARD_10MOONSTVMASTER3:
 		ir_codes     = RC_MAP_ENCORE_ENLTV;
@@ -829,8 +771,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->mask_keydown = mask_keydown;
 	ir->mask_keyup   = mask_keyup;
 	ir->polling      = polling;
-	ir->rc5_gpio	 = rc5_gpio;
-	ir->nec_gpio	 = nec_gpio;
 	ir->raw_decode	 = raw_decode;
 
 	/* init input device */
@@ -845,11 +785,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	if (raw_decode)
 		rc->driver_type = RC_DRIVER_IR_RAW;
 
-	if (!raw_decode && allow_protocol_change) {
-		rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-		rc->change_protocol = saa7134_ir_change_protocol;
-	}
-
 	rc->input_name = ir->name;
 	rc->input_phys = ir->phys;
 	rc->input_id.bustype = BUS_PCI;
@@ -1023,152 +958,3 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 
 	return 1;
 }
-
-static int saa7134_rc5_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-	struct timeval tv;
-	u32 gap;
-	unsigned long current_jiffies, timeout;
-
-	/* get time of bit */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* active code => add bit */
-	if (ir->active) {
-		/* only if in the code (otherwise spurious IRQ or timer
-		   late) */
-		if (ir->last_bit < 28) {
-			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
-			    ir_rc5_remote_gap;
-			ir->code |= 1 << ir->last_bit;
-		}
-		/* starting new code */
-	} else {
-		ir->active = 1;
-		ir->code = 0;
-		ir->base_time = tv;
-		ir->last_bit = 0;
-
-		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
-		mod_timer(&ir->timer_end, timeout);
-	}
-
-	return 1;
-}
-
-static void nec_task(unsigned long data)
-{
-	struct saa7134_dev *dev = (struct saa7134_dev *) data;
-	struct card_ir *ir;
-	struct timeval tv;
-	int count, pulse, oldpulse, gap;
-	u32 ircode = 0, not_code = 0;
-	int ngap = 0;
-
-	if (!data) {
-		printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
-		/* GPIO will be kept disabled */
-		return;
-	}
-
-	ir = dev->remote;
-
-	/* rising SAA7134_GPIO_GPRESCAN reads the status */
-	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-
-	oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
-	pulse = oldpulse;
-
-	do_gettimeofday(&tv);
-	ir->base_time = tv;
-
-	/* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
-	   Unfortunately, using IRQ to decode pulse didn't work, since it uses
-	   a pulse train of 38KHz. This means one pulse on each 52 us
-	 */
-	do {
-		/* Wait until the end of pulse/space or 5 ms */
-		for (count = 0; count < 500; count++)  {
-			udelay(10);
-			/* rising SAA7134_GPIO_GPRESCAN reads the status */
-			saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
-				& ir->mask_keydown;
-			if (pulse != oldpulse)
-				break;
-		}
-
-		do_gettimeofday(&tv);
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-				tv.tv_usec - ir->base_time.tv_usec;
-
-		if (!pulse) {
-			/* Bit 0 has 560 us, while bit 1 has 1120 us.
-			   Do something only if bit == 1
-			 */
-			if (ngap && (gap > 560 + 280)) {
-				unsigned int shift = ngap - 1;
-
-				/* Address first, then command */
-				if (shift < 8) {
-					shift += 8;
-					ircode |= 1 << shift;
-				} else if (shift < 16) {
-					not_code |= 1 << shift;
-				} else if (shift < 24) {
-					shift -= 16;
-					ircode |= 1 << shift;
-				} else {
-					shift -= 24;
-					not_code |= 1 << shift;
-				}
-			}
-			ngap++;
-		}
-
-
-		ir->base_time = tv;
-
-		/* TIMEOUT - Long pulse */
-		if (gap >= 5000)
-			break;
-		oldpulse = pulse;
-	} while (ngap < 32);
-
-	if (ngap == 32) {
-		/* FIXME: should check if not_code == ~ircode */
-		ir->code = ir_extract_bits(ircode, ir->mask_keycode);
-
-		dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
-			 ir->code, ircode, not_code);
-
-		ir_keydown(ir->dev, ir->code, 0);
-	} else {
-		dprintk("Repeat last key\n");
-		ir_repeat(ir->dev);
-	}
-
-	saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-}
-
-static int saa7134_nec_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-
-	saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-	tasklet_schedule(&ir->tlet);
-
-	return 1;
-}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 4e37b8bfb6fa..a6c726fe4c5d 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>
-- 
cgit v1.2.3


From a6e3b81f6198654207c4e972e7ed91931e53e93c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 10:05:29 -0300
Subject: [media] rc: Remove ir-common.h

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-input.c      |  5 ++++
 drivers/media/video/bt8xx/bttv.h            |  1 -
 drivers/media/video/bt8xx/bttvp.h           | 43 ++++++++++++++++++++++++++++-
 drivers/media/video/saa7134/saa7134-input.c | 30 ++++++++++----------
 drivers/media/video/saa7134/saa7134.h       | 23 ++++++++++++++-
 5 files changed, 84 insertions(+), 18 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index e8f60ab58db6..e4df7f85f9df 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -147,6 +147,11 @@ static void bttv_input_timer(unsigned long data)
  * testing.
  */
 
+#define RC5_START(x)	(((x) >> 12) & 3)
+#define RC5_TOGGLE(x)	(((x) >> 11) & 1)
+#define RC5_ADDR(x)	(((x) >> 6) & 31)
+#define RC5_INSTR(x)	((x) & 63)
+
 /* decode raw bit pattern to RC5 code */
 static u32 bttv_rc5_decode(unsigned int code)
 {
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 6fd2a8ebda1e..fd62bf15d779 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -17,7 +17,6 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-device.h>
-#include <media/ir-common.h>
 #include <media/i2c-addr.h>
 #include <media/tuner.h>
 
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 157285b434c9..0bbdd481e336 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,7 @@
 #include <linux/device.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/tveeprom.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
 #include <media/ir-kbd-i2c.h>
 
 #include "bt848.h"
@@ -120,6 +120,47 @@ struct bttv_format {
 	int  hshift,vshift;   /* for planar modes   */
 };
 
+struct card_ir {
+	struct rc_dev           *dev;
+
+	char                    name[32];
+	char                    phys[32];
+#if 0
+	int                     users;
+	u32                     running:1;
+#endif
+	/* Usual gpio signalling */
+	u32                     mask_keycode;
+	u32                     mask_keydown;
+	u32                     mask_keyup;
+	u32                     polling;
+	u32                     last_gpio;
+	int                     shift_by;
+	int                     start; // What should RC5_START() be
+	int                     addr; // What RC5_ADDR() should be.
+	int                     rc5_remote_gap;
+	struct work_struct      work;
+	struct timer_list       timer;
+
+	/* RC5 gpio */
+	u32 rc5_gpio;
+	struct timer_list timer_end;    /* timer_end for code completion */
+	u32 last_bit;                   /* last raw bit seen */
+	u32 code;                       /* raw code under construction */
+	struct timeval base_time;       /* time of last seen code */
+	int active;                     /* building raw code */
+
+#if 0
+	/* NEC decoding */
+	u32                     nec_gpio;
+	struct tasklet_struct   tlet;
+
+	/* IR core raw decoding */
+	u32                     raw_decode;
+#endif
+};
+
+
 /* ---------------------------------------------------------- */
 
 struct bttv_geometry {
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 72562b8cf3be..900e7985d9b3 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -61,7 +61,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
 
 static int build_key(struct saa7134_dev *dev)
 {
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 	u32 gpio, data;
 
 	/* here comes the additional handshake steps for some cards */
@@ -385,7 +385,7 @@ static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
 	if (!dev || !dev->remote)
 		return;
@@ -404,7 +404,7 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 static void saa7134_input_timer(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev *)data;
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 
 	build_key(dev);
 	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
@@ -413,17 +413,17 @@ static void saa7134_input_timer(unsigned long data)
 static void ir_raw_decode_timer_end(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev *)data;
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 
 	ir_raw_event_handle(dev->remote->dev);
 
-	ir->active = 0;
+	ir->active = false;
 }
 
 static int __saa7134_ir_start(void *priv)
 {
 	struct saa7134_dev *dev = priv;
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
 	if (!dev)
 		return -EINVAL;
@@ -435,7 +435,7 @@ static int __saa7134_ir_start(void *priv)
 	if (ir->running)
 		return 0;
 
-	ir->running = 1;
+	ir->running = true;
 	if (ir->polling) {
 		setup_timer(&ir->timer, saa7134_input_timer,
 			    (unsigned long)dev);
@@ -446,7 +446,7 @@ static int __saa7134_ir_start(void *priv)
 		init_timer(&ir->timer_end);
 		ir->timer_end.function = ir_raw_decode_timer_end;
 		ir->timer_end.data = (unsigned long)dev;
-		ir->active = 0;
+		ir->active = false;
 	}
 
 	return 0;
@@ -455,7 +455,7 @@ static int __saa7134_ir_start(void *priv)
 static void __saa7134_ir_stop(void *priv)
 {
 	struct saa7134_dev *dev = priv;
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
 	if (!dev)
 		return;
@@ -470,10 +470,10 @@ static void __saa7134_ir_stop(void *priv)
 		del_timer_sync(&dev->remote->timer);
 	else if (ir->raw_decode) {
 		del_timer_sync(&ir->timer_end);
-		ir->active = 0;
+		ir->active = false;
 	}
 
-	ir->running = 0;
+	ir->running = false;
 
 	return;
 }
@@ -511,7 +511,7 @@ static void saa7134_ir_close(struct rc_dev *rc)
 
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 	struct rc_dev *rc;
 	char *ir_codes = NULL;
 	u32 mask_keycode = 0;
@@ -764,7 +764,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->dev = rc;
 	dev->remote = ir;
 
-	ir->running = 0;
+	ir->running = false;
 
 	/* init hardware-specific stuff */
 	ir->mask_keycode = mask_keycode;
@@ -934,7 +934,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 {
-	struct card_ir	*ir = dev->remote;
+	struct saa7134_card_ir	*ir = dev->remote;
 	unsigned long 	timeout;
 	int space;
 
@@ -953,7 +953,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	if (!ir->active) {
 		timeout = jiffies + jiffies_to_msecs(15);
 		mod_timer(&ir->timer_end, timeout);
-		ir->active = 1;
+		ir->active = true;
 	}
 
 	return 1;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index a6c726fe4c5d..c6ef95ec68f2 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -119,6 +119,27 @@ struct saa7134_format {
 	unsigned int   uvswap:1;
 };
 
+struct saa7134_card_ir {
+	struct rc_dev		*dev;
+
+	char                    name[32];
+	char                    phys[32];
+	int                     users;
+
+	u32			polling;
+        u32			last_gpio;
+        u32			mask_keycode, mask_keydown, mask_keyup;
+
+	bool                    running;
+	bool			active;
+
+	struct timer_list       timer;
+	struct timer_list	timer_end;    /* timer_end for code completion */
+
+	/* IR core raw decoding */
+	u32                     raw_decode;
+};
+
 /* ----------------------------------------------------------- */
 /* card configuration                                          */
 
@@ -530,7 +551,7 @@ struct saa7134_dev {
 
 	/* infrared remote */
 	int                        has_remote;
-	struct card_ir		   *remote;
+	struct saa7134_card_ir		   *remote;
 
 	/* pci i/o */
 	char                       name[32];
-- 
cgit v1.2.3


From 6bda96447cef24fbf97a798b1ea664224d5fdc25 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 13:28:38 -0300
Subject: [media] rc: rename the remaining things to rc_core

The Remote Controller subsystem is meant to be used not only by Infra Red
but also for similar types of Remote Controllers. The core is not specific
to Infra Red. As such, rename:
	- ir-core.h to rc-core.h
	- IR_CORE to RC_CORE
	- namespace inside rc-core.c/rc-core.h

To be consistent with the other changes.

No functional change on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dm1105/Kconfig            |  2 +-
 drivers/media/dvb/dm1105/dm1105.c           |  2 +-
 drivers/media/dvb/dvb-usb/Kconfig           |  2 +-
 drivers/media/dvb/dvb-usb/dvb-usb.h         |  2 +-
 drivers/media/dvb/dvb-usb/lmedm04.c         |  2 +-
 drivers/media/dvb/mantis/Kconfig            |  2 +-
 drivers/media/dvb/mantis/mantis_input.c     |  2 +-
 drivers/media/dvb/siano/Kconfig             |  2 +-
 drivers/media/dvb/siano/smsir.h             |  2 +-
 drivers/media/dvb/ttpci/Kconfig             |  2 +-
 drivers/media/dvb/ttpci/budget-ci.c         |  2 +-
 drivers/media/rc/Kconfig                    | 35 +++++++++++++++--------------
 drivers/media/rc/Makefile                   |  2 +-
 drivers/media/rc/ene_ir.c                   |  2 +-
 drivers/media/rc/imon.c                     |  2 +-
 drivers/media/rc/ir-lirc-codec.c            |  2 +-
 drivers/media/rc/keymaps/Kconfig            |  2 +-
 drivers/media/rc/keymaps/rc-lirc.c          |  2 +-
 drivers/media/rc/mceusb.c                   |  2 +-
 drivers/media/rc/nuvoton-cir.c              |  2 +-
 drivers/media/rc/rc-core-priv.h             |  2 +-
 drivers/media/rc/rc-main.c                  | 18 +++++++--------
 drivers/media/rc/rc-raw.c                   |  2 +-
 drivers/media/rc/streamzap.c                |  2 +-
 drivers/media/rc/winbond-cir.c              |  2 +-
 drivers/media/video/Kconfig                 |  2 +-
 drivers/media/video/bt8xx/Kconfig           |  2 +-
 drivers/media/video/bt8xx/bttvp.h           |  2 +-
 drivers/media/video/cx18/Kconfig            |  2 +-
 drivers/media/video/cx231xx/Kconfig         |  4 ++--
 drivers/media/video/cx231xx/cx231xx.h       |  2 +-
 drivers/media/video/cx23885/Kconfig         |  2 +-
 drivers/media/video/cx23885/cx23885-input.c |  2 +-
 drivers/media/video/cx23885/cx23885.h       |  2 +-
 drivers/media/video/cx23885/cx23888-ir.c    |  2 +-
 drivers/media/video/cx25840/cx25840-ir.c    |  2 +-
 drivers/media/video/cx88/Kconfig            |  2 +-
 drivers/media/video/cx88/cx88-input.c       |  2 +-
 drivers/media/video/em28xx/Kconfig          |  2 +-
 drivers/media/video/em28xx/em28xx.h         |  2 +-
 drivers/media/video/ir-kbd-i2c.c            |  2 +-
 drivers/media/video/ivtv/Kconfig            |  2 +-
 drivers/media/video/saa7134/Kconfig         |  2 +-
 drivers/media/video/saa7134/saa7134.h       |  2 +-
 drivers/media/video/tlg2300/Kconfig         |  2 +-
 45 files changed, 71 insertions(+), 70 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index 576f3b70d792..f3de0a4d63f2 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -8,7 +8,7 @@ config DVB_DM1105
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	depends on IR_CORE
+	depends on RC_CORE
 	help
 	  Support for cards based on the SDMC DM1105 PCI chip like
 	  DvbWorld 2002
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index d1a43858f29c..e9cacf6e9277 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -27,7 +27,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "demux.h"
 #include "dmxdev.h"
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2525d3b3c88d..3d48ba019342 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB && I2C && IR_CORE
+	depends on DVB_CORE && USB && I2C && RC_CORE
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 83aa9826560f..18828cb282c4 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -14,7 +14,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb_frontend.h"
 #include "dvb_demux.h"
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d8f1b150e1cb..f0c030837f29 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -61,7 +61,7 @@
 #define DVB_USB_LOG_PREFIX "LME2510(C)"
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb-usb.h"
 #include "lmedm04.h"
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
index fd0830ed10d8..a13a50503134 100644
--- a/drivers/media/dvb/mantis/Kconfig
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -1,6 +1,6 @@
 config MANTIS_CORE
 	tristate "Mantis/Hopper PCI bridge based devices"
-	depends on PCI && I2C && INPUT && IR_CORE
+	depends on PCI && I2C && INPUT && RC_CORE
 
 	help
 	  Support for PCI cards based on the Mantis and Hopper PCi bridge.
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index 209f2110e20c..e030b18ad6d9 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,7 +18,7 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index e520bceee0af..bc6456eb2c4f 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
 
 config SMS_SIANO_MDTV
 	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && IR_CORE && HAS_DMA
+	depends on DVB_CORE && RC_CORE && HAS_DMA
 	---help---
 	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index c2f68a460ee1..ae92b3a8587e 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define __SMS_IR_H__
 
 #include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define IR_DEFAULT_TIMEOUT		100
 
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 0ffd6943da83..44afab2fdc2d 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -97,7 +97,7 @@ config DVB_BUDGET_CI
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	depends on IR_CORE
+	depends on RC_CORE
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 9aca0f37993b..32caa9b7af8e 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -34,7 +34,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "budget.h"
 
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index ef19375899ec..42b4feb0e7f9 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -1,16 +1,17 @@
-menuconfig IR_CORE
-	tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+	tristate "Remote Controller adapters"
 	depends on INPUT
 	default INPUT
 	---help---
 	  Enable support for Remote Controllers on Linux. This is
 	  needed in order to support several video capture adapters.
+	  Currently, all supported devices use InfraRed.
 
 	  Enable this option if you have a video capture board even
 	  if you don't need IR, as otherwise, you may not be able to
 	  compile the driver for your adapter.
 
-if IR_CORE
+if RC_CORE
 
 config LIRC
 	tristate
@@ -27,7 +28,7 @@ source "drivers/media/rc/keymaps/Kconfig"
 
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -37,7 +38,7 @@ config IR_NEC_DECODER
 
 config IR_RC5_DECODER
 	tristate "Enable IR raw decoder for the RC-5 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -47,7 +48,7 @@ config IR_RC5_DECODER
 
 config IR_RC6_DECODER
 	tristate "Enable IR raw decoder for the RC6 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -57,7 +58,7 @@ config IR_RC6_DECODER
 
 config IR_JVC_DECODER
 	tristate "Enable IR raw decoder for the JVC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -67,7 +68,7 @@ config IR_JVC_DECODER
 
 config IR_SONY_DECODER
 	tristate "Enable IR raw decoder for the Sony protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---
@@ -76,7 +77,7 @@ config IR_SONY_DECODER
 
 config IR_RC5_SZ_DECODER
 	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -88,7 +89,7 @@ config IR_RC5_SZ_DECODER
 
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on LIRC
 	default y
 
@@ -99,7 +100,7 @@ config IR_LIRC_CODEC
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transceiver made by ENE.
@@ -113,7 +114,7 @@ config IR_ENE
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -125,7 +126,7 @@ config IR_IMON
 config IR_MCEUSB
 	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Windows Media Center Edition
@@ -137,7 +138,7 @@ config IR_MCEUSB
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transciever made by Nuvoton (formerly Winbond). This chip is
@@ -150,7 +151,7 @@ config IR_NUVOTON
 config IR_STREAMZAP
 	tristate "Streamzap PC Remote IR Receiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Streamzap PC Remote
@@ -162,7 +163,7 @@ config IR_STREAMZAP
 config IR_WINBOND_CIR
         tristate "Winbond IR remote control"
         depends on X86 && PNP
-	depends on IR_CORE
+	depends on RC_CORE
         select NEW_LEDS
         select LEDS_CLASS
         select LEDS_TRIGGERS
@@ -176,4 +177,4 @@ config IR_WINBOND_CIR
            To compile this driver as a module, choose M here: the module will
 	   be called winbond_cir.
 
-endif #IR_CORE
+endif #RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 8c0e4cb19551..21251ba55904 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -2,7 +2,7 @@ rc-core-objs	:= rc-main.o rc-raw.o
 
 obj-y += keymaps/
 
-obj-$(CONFIG_IR_CORE) += rc-core.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 0a4151f03c7e..1ace4581f157 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -37,7 +37,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include "ene_ir.h"
 
 static int sample_period;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 8d4b35d1ae56..b6ba3c7dc632 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -38,7 +38,7 @@
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include <linux/time.h>
 #include <linux/timer.h>
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index ceabea6053de..f9086c5ba8b1 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -16,7 +16,7 @@
 #include <linux/wait.h>
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include "rc-core-priv.h"
 
 #define LIRCBUF_SIZE 256
diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
index 14b22f58f823..8e615fd55852 100644
--- a/drivers/media/rc/keymaps/Kconfig
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -1,6 +1,6 @@
 config RC_MAP
 	tristate "Compile Remote Controller keymap modules"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 43fcf9035082..9c8577d6e497 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -9,7 +9,7 @@
  * (at your option) any later version.
  */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 static struct ir_scancode lirc[] = {
 	{ },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 539bec2974b7..db7787ac67a3 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -37,7 +37,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.91"
 #define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 0ce328f9dacf..bf3f58f7bd7c 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -32,7 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci_ids.h>
 
 #include "nuvoton-cir.h"
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 3616c32d3f87..48065b714d00 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -18,7 +18,7 @@
 
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 struct ir_raw_handler {
 	struct list_head list;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 5b67eea96ebb..d91b62cf1324 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -12,7 +12,7 @@
  *  GNU General Public License for more details.
  */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -1103,11 +1103,11 @@ EXPORT_SYMBOL_GPL(rc_unregister_device);
  * Init/exit code for the module. Basically, creates/removes /sys/class/rc
  */
 
-static int __init ir_core_init(void)
+static int __init rc_core_init(void)
 {
 	int rc = class_register(&ir_input_class);
 	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
+		printk(KERN_ERR "rc_core: unable to register rc class\n");
 		return rc;
 	}
 
@@ -1118,18 +1118,18 @@ static int __init ir_core_init(void)
 	return 0;
 }
 
-static void __exit ir_core_exit(void)
+static void __exit rc_core_exit(void)
 {
 	class_unregister(&ir_input_class);
 	ir_unregister_map(&empty_map);
 }
 
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+module_init(rc_core_init);
+module_exit(rc_core_exit);
 
-int ir_core_debug;    /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
+int rc_core_debug;    /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
 
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
index ab9b1e4071c0..165412fd240e 100644
--- a/drivers/media/rc/rc-raw.c
+++ b/drivers/media/rc/rc-raw.c
@@ -357,7 +357,7 @@ static void init_decoders(struct work_struct *work)
 	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at ir-core.h
+	   it is needed to change the CONFIG_MODULE test at rc-core.h
 	 */
 }
 #endif
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index f05f5c173fdf..ea2cb636a193 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -36,7 +36,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.61"
 #define DRIVER_NAME	"streamzap"
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 0ee16ec23bbf..186de5522001 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -50,7 +50,7 @@
 #include <linux/io.h>
 #include <linux/bitrev.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define DRVNAME "winbond-cir"
 
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 963b3e6c4a97..4b751ef47a83 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -96,7 +96,7 @@ config VIDEO_HELPER_CHIPS_AUTO
 
 config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && IR_CORE
+	depends on I2C && RC_CORE
 	default y
 	---help---
 	  Most boards have an IR chip directly connected via GPIO. However,
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 3c7c0a572c45..7da5c2e1fc12 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_BT848
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 0bbdd481e336..b71d04d12085 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,7 @@
 #include <linux/device.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/tveeprom.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 #include "bt848.h"
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index f3c3ccb491fe..d9d2f6ad6ffb 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_CX18
 	tristate "Conexant cx23418 MPEG encoder support"
 	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
 	select I2C_ALGOBIT
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index d6a235007a7d..ae85a7a7bd73 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_CX231XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
@@ -16,7 +16,7 @@ config VIDEO_CX231XX
 
 config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on VIDEO_CX231XX
 	default y
 	---help---
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index fcccc9d2a08e..87a20ae6fcc0 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -34,7 +34,7 @@
 
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dvb.h>
 
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index e1367b35647a..6b4a516addfe 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_CX23885
 	select VIDEO_BTCX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index f1bb3a8683c1..e824ba63fdde 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -36,7 +36,7 @@
  */
 
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/v4l2-subdev.h>
 
 #include "cx23885.h"
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index f350d88944e8..fd387229daff 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -30,7 +30,7 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "btcx-risc.h"
 #include "cx23885-reg.h"
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index e78e3e4c8112..e37be6fcf67d 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -26,7 +26,7 @@
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx23885.h"
 
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 97a4e9b25fe4..627926f6bde8 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -24,7 +24,7 @@
 #include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <media/cx25840.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx25840-core.h"
 
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index dbae62935e1f..5c42abdf422f 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C && IR_CORE
+	depends on VIDEO_DEV && PCI && I2C && RC_CORE
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3b2ef45d6348..a73033846fce 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -29,7 +29,7 @@
 #include <linux/module.h>
 
 #include "cx88.h"
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define MODULE_NAME "cx88xx"
 
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 72ea2baba790..985100ea17a4 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_EM28XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6a48043a7b92..6f2795a3d4b7 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -33,7 +33,7 @@
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
 #include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index de0060fa33f1..83662a4ff73c 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -46,7 +46,7 @@
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 /* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index c4f19801c73b..89f65914cc8e 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_IVTV
 	tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
 	depends on VIDEO_V4L2 && PCI && I2C
 	select I2C_ALGOBIT
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index e03bff9e4246..380f1b28cfcc 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
 
 config VIDEO_SAA7134_RC
 	bool "Philips SAA7134 Remote Controller support"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on VIDEO_SAA7134
 	default y
 	---help---
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index c6ef95ec68f2..1923f3ca0eab 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
index 580580ec9362..645d915267e6 100644
--- a/drivers/media/video/tlg2300/Kconfig
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_TLG2300
 	depends on VIDEO_DEV && I2C && SND && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select SND_PCM
 	select VIDEOBUF_DVB
-- 
cgit v1.2.3


From ca86674b8a93ea11c4bb6f4dd0113b1adf1fa841 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 13:53:11 -0300
Subject: [media] Rename all public generic RC functions from ir_ to rc_

Those functions are not InfraRed specific. So, rename them to properly
reflect it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dm1105/dm1105.c           |  2 +-
 drivers/media/dvb/dvb-usb/af9015.c          |  4 ++--
 drivers/media/dvb/dvb-usb/anysee.c          |  2 +-
 drivers/media/dvb/dvb-usb/dib0700_core.c    |  2 +-
 drivers/media/dvb/dvb-usb/dib0700_devices.c |  4 ++--
 drivers/media/dvb/dvb-usb/lmedm04.c         |  2 +-
 drivers/media/dvb/ttpci/budget-ci.c         |  2 +-
 drivers/media/rc/imon.c                     | 10 ++++----
 drivers/media/rc/ir-jvc-decoder.c           |  4 ++--
 drivers/media/rc/ir-nec-decoder.c           |  6 ++---
 drivers/media/rc/ir-rc5-decoder.c           |  2 +-
 drivers/media/rc/ir-rc5-sz-decoder.c        |  2 +-
 drivers/media/rc/ir-rc6-decoder.c           |  2 +-
 drivers/media/rc/ir-sony-decoder.c          |  2 +-
 drivers/media/rc/rc-main.c                  | 36 ++++++++++++++---------------
 drivers/media/video/bt8xx/bttv-input.c      | 16 ++++++-------
 drivers/media/video/cx88/cx88-input.c       | 14 +++++------
 drivers/media/video/em28xx/em28xx-input.c   |  4 ++--
 drivers/media/video/ir-kbd-i2c.c            |  2 +-
 drivers/media/video/saa7134/saa7134-input.c | 12 +++++-----
 20 files changed, 65 insertions(+), 65 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index e9cacf6e9277..2d8b4044be36 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -531,7 +531,7 @@ static void dm1105_emit_key(struct work_struct *work)
 
 	data = (ircom >> 8) & 0x7f;
 
-	ir_keydown(ir->dev, data, 0);
+	rc_keydown(ir->dev, data, 0);
 }
 
 /* work handler */
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 8b9ab3002e11..bc2a6e464cea 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1041,13 +1041,13 @@ static int af9015_rc_query(struct dvb_usb_device *d)
 				priv->rc_keycode = buf[12] << 16 |
 					buf[13] << 8 | buf[14];
 			}
-			ir_keydown(d->rc_dev, priv->rc_keycode, 0);
+			rc_keydown(d->rc_dev, priv->rc_keycode, 0);
 		} else {
 			priv->rc_keycode = 0; /* clear just for sure */
 		}
 	} else if (priv->rc_repeat != buf[6] || buf[0]) {
 		deb_rc("%s: key repeated\n", __func__);
-		ir_keydown(d->rc_dev, priv->rc_keycode, 0);
+		rc_keydown(d->rc_dev, priv->rc_keycode, 0);
 	} else {
 		deb_rc("%s: no key press\n", __func__);
 	}
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index c6e4ba53ad61..5e12488f3c76 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -394,7 +394,7 @@ static int anysee_rc_query(struct dvb_usb_device *d)
 
 	if (ircode[0]) {
 		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
-		ir_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
+		rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
 	}
 
 	return 0;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 3b58f4575689..1dd119e7b676 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -600,7 +600,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		goto resubmit;
 	}
 
-	ir_keydown(d->rc_dev, keycode, toggle);
+	rc_keydown(d->rc_dev, keycode, toggle);
 
 resubmit:
 	/* Clean the buffer before we requeue */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index be167f2bea33..9ac920d0483e 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -520,13 +520,13 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 			d->last_event = keycode;
 		}
 
-		ir_keydown(d->rc_dev, keycode, 0);
+		rc_keydown(d->rc_dev, keycode, 0);
 		break;
 	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
 		keycode = key[3-2] << 8 | key[3-3];
 		toggle = key[3-1];
-		ir_keydown(d->rc_dev, keycode, toggle);
+		rc_keydown(d->rc_dev, keycode, toggle);
 
 		break;
 	}
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index f0c030837f29..1455c238b01b 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -198,7 +198,7 @@ static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
 	deb_info(1, "INT Key Keypress =%04x", keypress);
 
 	if (keypress > 0)
-		ir_keydown(d->rc_dev, keypress, 0);
+		rc_keydown(d->rc_dev, keypress, 0);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 32caa9b7af8e..8ae67c1751a9 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -159,7 +159,7 @@ static void msp430_ir_interrupt(unsigned long data)
 	    budget_ci->ir.rc5_device != (command & 0x1f))
 		return;
 
-	ir_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
+	rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
 }
 
 static int msp430_ir_init(struct budget_ci *budget_ci)
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index b6ba3c7dc632..d67573edb052 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1146,14 +1146,14 @@ static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
 	bool is_release_code = false;
 
 	/* Look for the initial press of a button */
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 	ictx->rc_toggle = 0x0;
 	ictx->rc_scancode = scancode;
 
 	/* Look for the release of a button */
 	if (keycode == KEY_RESERVED) {
 		release = scancode & ~0x4000;
-		keycode = ir_g_keycode_from_table(ictx->rdev, release);
+		keycode = rc_g_keycode_from_table(ictx->rdev, release);
 		if (keycode != KEY_RESERVED)
 			is_release_code = true;
 	}
@@ -1182,7 +1182,7 @@ static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
 		scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
 
 	ictx->rc_scancode = scancode;
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 
 	/* not used in mce mode, but make sure we know its false */
 	ictx->release_code = false;
@@ -1564,9 +1564,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 
 	if (ktype != IMON_KEY_PANEL) {
 		if (press_type == 0)
-			ir_keyup(ictx->rdev);
+			rc_keyup(ictx->rdev);
 		else {
-			ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+			rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
 			spin_lock_irqsave(&ictx->kc_lock, flags);
 			ictx->last_keycode = ictx->kc;
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index cfe0e70440a5..09c143ff33f3 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -139,12 +139,12 @@ again:
 			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
 				   (bitrev8((data->bits >> 0) & 0xff) << 0);
 			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
-			ir_keydown(dev, scancode, data->toggle);
+			rc_keydown(dev, scancode, data->toggle);
 			data->first = false;
 			data->old_bits = data->bits;
 		} else if (data->bits == data->old_bits) {
 			IR_dprintk(1, "JVC repeat\n");
-			ir_repeat(dev);
+			rc_repeat(dev);
 		} else {
 			IR_dprintk(1, "JVC invalid repeat msg\n");
 			break;
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 8ff157a140ca..235d774d0ec2 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -88,7 +88,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			data->state = STATE_BIT_PULSE;
 			return 0;
 		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			ir_repeat(dev);
+			rc_repeat(dev);
 			IR_dprintk(1, "Repeat last key\n");
 			data->state = STATE_TRAILER_PULSE;
 			return 0;
@@ -114,7 +114,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			geq_margin(ev.duration,
 			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
 				IR_dprintk(1, "Repeat last key\n");
-				ir_repeat(dev);
+				rc_repeat(dev);
 				data->state = STATE_INACTIVE;
 				return 0;
 
@@ -178,7 +178,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 		if (data->is_nec_x)
 			data->necx_repeat = true;
 
-		ir_keydown(dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index dae6f9a9b662..779ab0d0a285 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -150,7 +150,7 @@ again:
 				   scancode, toggle);
 		}
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index d8a53c02c1e4..5586bf20c8d7 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -114,7 +114,7 @@ again:
 		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
 			   scancode, toggle);
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 2435bbd1dbcc..88d948728c2f 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -242,7 +242,7 @@ again:
 			goto out;
 		}
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 3138520fb9e7..5292b89f8de2 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -143,7 +143,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 
 		scancode = device << 16 | subdevice << 8 | function;
 		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
-		ir_keydown(dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d91b62cf1324..11e2703ef1c4 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -481,7 +481,7 @@ out:
 }
 
 /**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * rc_g_keycode_from_table() - gets the keycode that corresponds to a scancode
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:	the scancode to look for
  * @return:	the corresponding keycode, or KEY_RESERVED
@@ -490,7 +490,7 @@ out:
  * keycode. Normally it should not be used since drivers should have no
  * interest in keycodes.
  */
-u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 {
 	struct ir_scancode_table *rc_tab = &dev->rc_tab;
 	unsigned int keycode;
@@ -511,7 +511,7 @@ u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 
 	return keycode;
 }
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
 
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
@@ -532,13 +532,13 @@ static void ir_do_keyup(struct rc_dev *dev)
 }
 
 /**
- * ir_keyup() - signals the release of a keypress
+ * rc_keyup() - signals the release of a keypress
  * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used to signal that a key has been released on the
  * remote control.
  */
-void ir_keyup(struct rc_dev *dev)
+void rc_keyup(struct rc_dev *dev)
 {
 	unsigned long flags;
 
@@ -546,7 +546,7 @@ void ir_keyup(struct rc_dev *dev)
 	ir_do_keyup(dev);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keyup);
+EXPORT_SYMBOL_GPL(rc_keyup);
 
 /**
  * ir_timer_keyup() - generates a keyup event after a timeout
@@ -577,14 +577,14 @@ static void ir_timer_keyup(unsigned long cookie)
 }
 
 /**
- * ir_repeat() - signals that a key is still pressed
+ * rc_repeat() - signals that a key is still pressed
  * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used by IR decoders when a repeat message which does
  * not include the necessary bits to reproduce the scancode has been
  * received.
  */
-void ir_repeat(struct rc_dev *dev)
+void rc_repeat(struct rc_dev *dev)
 {
 	unsigned long flags;
 
@@ -601,7 +601,7 @@ void ir_repeat(struct rc_dev *dev)
 out:
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_repeat);
+EXPORT_SYMBOL_GPL(rc_repeat);
 
 /**
  * ir_do_keydown() - internal function to process a keypress
@@ -643,7 +643,7 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
 }
 
 /**
- * ir_keydown() - generates input event for a key press
+ * rc_keydown() - generates input event for a key press
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
@@ -652,10 +652,10 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
  * This routine is used to signal that a key has been pressed on the
  * remote control.
  */
-void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
@@ -666,10 +666,10 @@ void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
 	}
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keydown);
+EXPORT_SYMBOL_GPL(rc_keydown);
 
 /**
- * ir_keydown_notimeout() - generates input event for a key press without
+ * rc_keydown_notimeout() - generates input event for a key press without
  *                          an automatic keyup event at a later time
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
@@ -677,18 +677,18 @@ EXPORT_SYMBOL_GPL(ir_keydown);
  *              support toggle values, this should be set to zero)
  *
  * This routine is used to signal that a key has been pressed on the
- * remote control. The driver must manually call ir_keyup() at a later stage.
+ * remote control. The driver must manually call rc_keyup() at a later stage.
  */
-void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
 
 static int ir_open(struct input_dev *idev)
 {
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index e4df7f85f9df..773ee6a8eed4 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -70,14 +70,14 @@ static void ir_handle_key(struct bttv *btv)
 
 	if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
 	    (ir->mask_keyup   && !(gpio & ir->mask_keyup))) {
-		ir_keydown_notimeout(ir->dev, data, 0);
+		rc_keydown_notimeout(ir->dev, data, 0);
 	} else {
 		/* HACK: Probably, ir->mask_keydown is missing
 		   for this board */
 		if (btv->c.type == BTTV_BOARD_WINFAST2000)
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 
-		ir_keyup(ir->dev);
+		rc_keyup(ir->dev);
 	}
 }
 
@@ -100,9 +100,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			gpio, data,
 			(gpio & ir->mask_keyup) ? " up" : "up/down");
 
-		ir_keydown_notimeout(ir->dev, data, 0);
+		rc_keydown_notimeout(ir->dev, data, 0);
 		if (keyup)
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 	} else {
 		if ((ir->last_gpio & 1 << 31) == keyup)
 			return;
@@ -112,9 +112,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			(gpio & ir->mask_keyup) ? " up" : "down");
 
 		if (keyup)
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 		else
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 	}
 
 	ir->last_gpio = data | keyup;
@@ -232,7 +232,7 @@ void bttv_rc5_timer_end(unsigned long data)
 			u32 instr = RC5_INSTR(rc5);
 
 			/* Good code */
-			ir_keydown(ir->dev, instr, toggle);
+			rc_keydown(ir->dev, instr, toggle);
 			dprintk(KERN_INFO DEVNAME ":"
 				" instruction %x, toggle %x\n",
 				instr, toggle);
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index a73033846fce..cfeba4c08715 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -123,26 +123,26 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 
 		data = (data << 4) | ((gpio_key & 0xf0) >> 4);
 
-		ir_keydown(ir->dev, data, 0);
+		rc_keydown(ir->dev, data, 0);
 
 	} else if (ir->mask_keydown) {
 		/* bit set on keydown */
 		if (gpio & ir->mask_keydown)
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		else
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 
 	} else if (ir->mask_keyup) {
 		/* bit cleared on keydown */
 		if (0 == (gpio & ir->mask_keyup))
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		else
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 
 	} else {
 		/* can't distinguish keydown/up :-/ */
-		ir_keydown_notimeout(ir->dev, data, 0);
-		ir_keyup(ir->dev);
+		rc_keydown_notimeout(ir->dev, data, 0);
+		rc_keyup(ir->dev);
 	}
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index b7d3999f0417..e32eb38564e6 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -297,12 +297,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 			poll_result.toggle_bit, poll_result.read_count,
 			poll_result.rc_address, poll_result.rc_data[0]);
 		if (ir->full_code)
-			ir_keydown(ir->rc,
+			rc_keydown(ir->rc,
 				   poll_result.rc_address << 8 |
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 		else
-			ir_keydown(ir->rc,
+			rc_keydown(ir->rc,
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 83662a4ff73c..c77ea53f50d7 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -252,7 +252,7 @@ static void ir_key_poll(struct IR_i2c *ir)
 	}
 
 	if (rc)
-		ir_keydown(ir->rc, ir_key, 0);
+		rc_keydown(ir->rc, ir_key, 0);
 }
 
 static void ir_work(struct work_struct *work)
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 900e7985d9b3..cd39aea30389 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -89,25 +89,25 @@ static int build_key(struct saa7134_dev *dev)
 	switch (dev->board) {
 	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 		if (data == ir->mask_keycode)
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 		else
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		return 0;
 	}
 
 	if (ir->polling) {
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_keydown_notimeout(ir->dev, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		} else {
-			ir_keyup(ir->dev);
+			rc_keyup(ir->dev);
 		}
 	}
 	else {	/* IRQ driven mode - handle key press and release in one go */
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_keydown_notimeout(ir->dev, data, 0);
-			ir_keyup(ir->dev);
+			rc_keydown_notimeout(ir->dev, data, 0);
+			rc_keyup(ir->dev);
 		}
 	}
 
-- 
cgit v1.2.3


From 29e3ec19d5c88d534ced219d3962d67243e4d310 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 14:12:46 -0300
Subject: [media] cx231xx: Properly name rc_map name

rc_map is confusing, as it may be understood as another thing. Properly
rename the field to indicate its usage.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-cards.c | 2 +-
 drivers/media/video/cx231xx/cx231xx-input.c | 4 ++--
 drivers/media/video/cx231xx/cx231xx.h       | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 83772eb8e391..2b6101763355 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -412,7 +412,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_i2c_master = 2,
 		.demod_i2c_master = 1,
 		.ir_i2c_master = 2,
-		.rc_map = RC_MAP_PIXELVIEW_NEW,
+		.rc_map_name = RC_MAP_PIXELVIEW_NEW,
 		.has_dvb = 1,
 		.demod_addr = 0x10,
 		.norm = V4L2_STD_PAL_M,
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 65d951e03c17..1d043ed1bc32 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -57,7 +57,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	dev_dbg(&dev->udev->dev, "%s\n", __func__);
 
 	/* Only initialize if a rc keycode map is defined */
-	if (!cx231xx_boards[dev->model].rc_map)
+	if (!cx231xx_boards[dev->model].rc_map_name)
 		return -ENODEV;
 
 	request_module("ir-kbd-i2c");
@@ -80,7 +80,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	 * an i2c device.
 	 */
 	dev->init_data.get_key = get_key_isdbt;
-	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map;
+	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
 	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
 	dev->init_data.rc_dev->scanmask = 0xff;
 	dev->init_data.rc_dev->driver_name = "cx231xx";
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index 87a20ae6fcc0..709cb87a7762 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -349,7 +349,7 @@ struct cx231xx_board {
 	u8 ir_i2c_master;
 
 	/* for devices with I2C chips for IR */
-	char *rc_map;
+	char *rc_map_name;
 
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
-- 
cgit v1.2.3


From 52b661449aecc47e652a164c0d8078b31e10aca0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 14:20:52 -0300
Subject: [media] rc: Rename remote controller type to rc_type instead of
 ir_type

for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/af9015.c                 | 12 +--
 drivers/media/dvb/dvb-usb/anysee.c                 |  2 +-
 drivers/media/dvb/dvb-usb/dib0700.h                |  2 +-
 drivers/media/dvb/dvb-usb/dib0700_core.c           | 12 +--
 drivers/media/dvb/dvb-usb/dib0700_devices.c        | 86 +++++++++++-----------
 drivers/media/dvb/dvb-usb/dvb-usb.h                |  2 +-
 drivers/media/dvb/mantis/mantis_input.c            |  2 +-
 drivers/media/dvb/siano/smsir.c                    |  2 +-
 drivers/media/rc/ene_ir.c                          |  2 +-
 drivers/media/rc/imon.c                            | 38 +++++-----
 drivers/media/rc/ir-jvc-decoder.c                  |  4 +-
 drivers/media/rc/ir-lirc-codec.c                   |  4 +-
 drivers/media/rc/ir-nec-decoder.c                  |  4 +-
 drivers/media/rc/ir-rc5-decoder.c                  |  4 +-
 drivers/media/rc/ir-rc5-sz-decoder.c               |  4 +-
 drivers/media/rc/ir-rc6-decoder.c                  |  4 +-
 drivers/media/rc/ir-sony-decoder.c                 |  4 +-
 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c    |  2 +-
 drivers/media/rc/keymaps/rc-alink-dtu-m.c          |  2 +-
 drivers/media/rc/keymaps/rc-anysee.c               |  2 +-
 drivers/media/rc/keymaps/rc-apac-viewcomp.c        |  2 +-
 drivers/media/rc/keymaps/rc-asus-pc39.c            |  2 +-
 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-a16d.c       |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-cardbus.c    |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-dvbt.c       |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-m135a.c      |  2 +-
 .../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c    |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c      |  2 +-
 drivers/media/rc/keymaps/rc-avermedia.c            |  2 +-
 drivers/media/rc/keymaps/rc-avertv-303.c           |  2 +-
 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c   |  2 +-
 drivers/media/rc/keymaps/rc-behold-columbus.c      |  2 +-
 drivers/media/rc/keymaps/rc-behold.c               |  2 +-
 drivers/media/rc/keymaps/rc-budget-ci-old.c        |  2 +-
 drivers/media/rc/keymaps/rc-cinergy-1400.c         |  2 +-
 drivers/media/rc/keymaps/rc-cinergy.c              |  2 +-
 drivers/media/rc/keymaps/rc-dib0700-nec.c          |  2 +-
 drivers/media/rc/keymaps/rc-dib0700-rc5.c          |  2 +-
 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c  |  2 +-
 drivers/media/rc/keymaps/rc-digittrade.c           |  2 +-
 drivers/media/rc/keymaps/rc-dm1105-nec.c           |  2 +-
 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c      |  2 +-
 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c   |  2 +-
 drivers/media/rc/keymaps/rc-em-terratec.c          |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c    |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv.c         |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv2.c        |  2 +-
 drivers/media/rc/keymaps/rc-evga-indtube.c         |  2 +-
 drivers/media/rc/keymaps/rc-eztv.c                 |  2 +-
 drivers/media/rc/keymaps/rc-flydvb.c               |  2 +-
 drivers/media/rc/keymaps/rc-flyvideo.c             |  2 +-
 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c       |  2 +-
 drivers/media/rc/keymaps/rc-gadmei-rm008z.c        |  2 +-
 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c   |  2 +-
 drivers/media/rc/keymaps/rc-gotview7135.c          |  2 +-
 drivers/media/rc/keymaps/rc-hauppauge-new.c        |  2 +-
 drivers/media/rc/keymaps/rc-imon-mce.c             |  2 +-
 drivers/media/rc/keymaps/rc-imon-pad.c             |  2 +-
 drivers/media/rc/keymaps/rc-iodata-bctv7e.c        |  2 +-
 drivers/media/rc/keymaps/rc-kaiomy.c               |  2 +-
 drivers/media/rc/keymaps/rc-kworld-315u.c          |  2 +-
 .../media/rc/keymaps/rc-kworld-plus-tv-analog.c    |  2 +-
 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c     |  2 +-
 drivers/media/rc/keymaps/rc-lirc.c                 |  2 +-
 drivers/media/rc/keymaps/rc-lme2510.c              |  2 +-
 drivers/media/rc/keymaps/rc-manli.c                |  2 +-
 drivers/media/rc/keymaps/rc-msi-digivox-ii.c       |  2 +-
 drivers/media/rc/keymaps/rc-msi-digivox-iii.c      |  2 +-
 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c  |  2 +-
 drivers/media/rc/keymaps/rc-msi-tvanywhere.c       |  2 +-
 drivers/media/rc/keymaps/rc-nebula.c               |  2 +-
 .../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c  |  2 +-
 drivers/media/rc/keymaps/rc-norwood.c              |  2 +-
 drivers/media/rc/keymaps/rc-npgtech.c              |  2 +-
 drivers/media/rc/keymaps/rc-pctv-sedna.c           |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-color.c       |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-grey.c        |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c     |  2 +-
 drivers/media/rc/keymaps/rc-pixelview-mk12.c       |  2 +-
 drivers/media/rc/keymaps/rc-pixelview-new.c        |  2 +-
 drivers/media/rc/keymaps/rc-pixelview.c            |  2 +-
 .../media/rc/keymaps/rc-powercolor-real-angel.c    |  2 +-
 drivers/media/rc/keymaps/rc-proteus-2309.c         |  2 +-
 drivers/media/rc/keymaps/rc-purpletv.c             |  2 +-
 drivers/media/rc/keymaps/rc-pv951.c                |  2 +-
 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c    |  2 +-
 drivers/media/rc/keymaps/rc-rc5-tv.c               |  2 +-
 drivers/media/rc/keymaps/rc-rc6-mce.c              |  2 +-
 .../media/rc/keymaps/rc-real-audio-220-32-keys.c   |  2 +-
 drivers/media/rc/keymaps/rc-streamzap.c            |  2 +-
 drivers/media/rc/keymaps/rc-tbs-nec.c              |  2 +-
 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c  |  2 +-
 drivers/media/rc/keymaps/rc-terratec-slim.c        |  2 +-
 drivers/media/rc/keymaps/rc-tevii-nec.c            |  2 +-
 drivers/media/rc/keymaps/rc-total-media-in-hand.c  |  2 +-
 drivers/media/rc/keymaps/rc-trekstor.c             |  2 +-
 drivers/media/rc/keymaps/rc-tt-1500.c              |  2 +-
 drivers/media/rc/keymaps/rc-twinhan1027.c          |  2 +-
 drivers/media/rc/keymaps/rc-videomate-s350.c       |  2 +-
 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c     |  2 +-
 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c |  2 +-
 drivers/media/rc/keymaps/rc-winfast.c              |  2 +-
 drivers/media/rc/mceusb.c                          |  2 +-
 drivers/media/rc/nuvoton-cir.c                     |  2 +-
 drivers/media/rc/rc-main.c                         | 34 ++++-----
 drivers/media/rc/streamzap.c                       |  2 +-
 drivers/media/video/cx18/cx18-i2c.c                |  2 +-
 drivers/media/video/cx231xx/cx231xx-input.c        |  2 +-
 drivers/media/video/cx23885/cx23885-input.c        |  4 +-
 drivers/media/video/cx88/cx88-input.c              |  8 +-
 drivers/media/video/em28xx/em28xx-input.c          | 12 +--
 drivers/media/video/ir-kbd-i2c.c                   | 18 ++---
 drivers/media/video/ivtv/ivtv-i2c.c                |  6 +-
 drivers/media/video/saa7134/saa7134-input.c        |  2 +-
 115 files changed, 227 insertions(+), 227 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index bc2a6e464cea..8671ca362c81 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1344,11 +1344,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1472,11 +1472,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1584,11 +1584,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.allowed_protos   = IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 5e12488f3c76..6b402e943539 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -476,7 +476,7 @@ static struct dvb_usb_device_properties anysee_properties = {
 
 	.rc.core = {
 		.rc_codes         = RC_MAP_ANYSEE,
-		.protocol         = IR_TYPE_OTHER,
+		.protocol         = RC_TYPE_OTHER,
 		.module_name      = "anysee",
 		.rc_query         = anysee_rc_query,
 		.rc_interval      = 250,  /* windows driver uses 500ms */
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 1e7d780332b5..3537d65c04bc 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -60,7 +60,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(struct rc_dev *dev, u64 ir_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
 
 extern int dib0700_device_count;
 extern int dvb_usb_dib0700_ir_proto;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 1dd119e7b676..8ca48f76dfa9 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,7 +471,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
-int dib0700_change_protocol(struct rc_dev *rc, u64 ir_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	struct dvb_usb_device *d = rc->priv;
 	struct dib0700_state *st = d->priv;
@@ -479,11 +479,11 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 ir_type)
 	int new_proto, ret;
 
 	/* Set the IR mode */
-	if (ir_type == IR_TYPE_RC5)
+	if (rc_type == RC_TYPE_RC5)
 		new_proto = 1;
-	else if (ir_type == IR_TYPE_NEC)
+	else if (rc_type == RC_TYPE_NEC)
 		new_proto = 0;
-	else if (ir_type == IR_TYPE_RC6) {
+	else if (rc_type == RC_TYPE_RC6) {
 		if (st->fw_version < 0x10200)
 			return -EINVAL;
 
@@ -499,7 +499,7 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 ir_type)
 		return ret;
 	}
 
-	d->props.rc.core.protocol = ir_type;
+	d->props.rc.core.protocol = rc_type;
 
 	return ret;
 }
@@ -562,7 +562,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		 purb->actual_length);
 
 	switch (d->props.rc.core.protocol) {
-	case IR_TYPE_NEC:
+	case RC_TYPE_NEC:
 		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 9ac920d0483e..defd83964ce2 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -510,7 +510,7 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 
 	d->last_event = 0;
 	switch (d->props.rc.core.protocol) {
-	case IR_TYPE_NEC:
+	case RC_TYPE_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
 		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
 		    (key[3] == 0xff))
@@ -1924,9 +1924,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -1958,9 +1958,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2017,9 +2017,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2059,9 +2059,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2135,9 +2135,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2179,9 +2179,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2247,9 +2247,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2294,9 +2294,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2363,9 +2363,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2399,9 +2399,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2467,9 +2467,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2511,9 +2511,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2560,9 +2560,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -2597,9 +2597,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = IR_TYPE_RC5 |
-					    IR_TYPE_RC6 |
-					    IR_TYPE_NEC,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	},
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 18828cb282c4..95b1603d5be8 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -190,7 +190,7 @@ struct dvb_rc {
 	char *rc_codes;
 	u64 protocol;
 	u64 allowed_protos;
-	int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
+	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
 	char *module_name;
 	int (*rc_query) (struct dvb_usb_device *d);
 	int rc_interval;
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index e030b18ad6d9..cf5f8ca6f685 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -99,7 +99,7 @@ static struct rc_keymap ir_mantis_map = {
 	.map = {
 		.scan = mantis_ir_table,
 		.size = ARRAY_SIZE(mantis_ir_table),
-		.ir_type = IR_TYPE_UNKNOWN,
+		.rc_type = RC_TYPE_UNKNOWN,
 		.name = RC_MAP_MANTIS,
 	}
 };
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index ebd73059b518..37bc5c4b8ad8 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 
 	dev->priv = coredev;
 	dev->driver_type = RC_DRIVER_IR_RAW;
-	dev->allowed_protos = IR_TYPE_ALL;
+	dev->allowed_protos = RC_TYPE_ALL;
 	dev->map_name = sms_get_board(board_id)->rc_codes;
 	dev->driver_name = MODULE_NAME;
 
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 1ace4581f157..80b3c319f698 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1052,7 +1052,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 		learning_mode_force = false;
 
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->allowed_protos = RC_TYPE_ALL;
 	rdev->priv = dev;
 	rdev->open = ene_open;
 	rdev->close = ene_close;
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index d67573edb052..de9dc0e202d5 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -131,7 +131,7 @@ struct imon_context {
 	u32 last_keycode;		/* last reported input keycode */
 	u32 rc_scancode;		/* the computed remote scancode */
 	u8 rc_toggle;			/* the computed remote toggle bit */
-	u64 ir_type;			/* iMON or MCE (RC6) IR protocol? */
+	u64 rc_type;			/* iMON or MCE (RC6) IR protocol? */
 	bool release_code;		/* some keys send a release code */
 
 	u8 display_type;		/* store the display type */
@@ -983,7 +983,7 @@ static void imon_touch_display_timeout(unsigned long data)
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
  */
-static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	int retval;
 	struct imon_context *ictx = rc->priv;
@@ -992,18 +992,18 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
-	if (ir_type && !(ir_type & rc->allowed_protos))
+	if (rc_type && !(rc_type & rc->allowed_protos))
 		dev_warn(dev, "Looks like you're trying to use an IR protocol "
 			 "this device does not support\n");
 
-	switch (ir_type) {
-	case IR_TYPE_RC6:
+	switch (rc_type) {
+	case RC_TYPE_RC6:
 		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
 		ir_proto_packet[0] = 0x01;
 		pad_mouse = false;
 		break;
-	case IR_TYPE_UNKNOWN:
-	case IR_TYPE_OTHER:
+	case RC_TYPE_UNKNOWN:
+	case RC_TYPE_OTHER:
 		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
 		if (pad_stabilize && !nomouse)
 			pad_mouse = true;
@@ -1012,7 +1012,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 			pad_mouse = false;
 		}
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
+		rc_type = RC_TYPE_OTHER;
 		break;
 	default:
 		dev_warn(dev, "Unsupported IR protocol specified, overriding "
@@ -1024,7 +1024,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 			pad_mouse = false;
 		}
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
+		rc_type = RC_TYPE_OTHER;
 		break;
 	}
 
@@ -1034,7 +1034,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
 	if (retval)
 		goto out;
 
-	ictx->ir_type = ir_type;
+	ictx->rc_type = rc_type;
 	ictx->pad_mouse = pad_mouse;
 
 out:
@@ -1306,7 +1306,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		rel_x = buf[2];
 		rel_y = buf[3];
 
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
 			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
 				dir = stabilize((int)rel_x, (int)rel_y,
 						timeout, threshold);
@@ -1373,7 +1373,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		buf[0] = 0x01;
 		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
 
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
 			dir = stabilize((int)rel_x, (int)rel_y,
 					timeout, threshold);
 			if (!dir) {
@@ -1495,7 +1495,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 		kc = imon_panel_key_lookup(scancode);
 	} else {
 		scancode = be32_to_cpu(*((u32 *)buf));
-		if (ictx->ir_type == IR_TYPE_RC6) {
+		if (ictx->rc_type == RC_TYPE_RC6) {
 			ktype = IMON_KEY_IMON;
 			if (buf[0] == 0x80)
 				ktype = IMON_KEY_MCE;
@@ -1709,7 +1709,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 {
 	u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
 	u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
-	u64 allowed_protos = IR_TYPE_OTHER;
+	u64 allowed_protos = RC_TYPE_OTHER;
 
 	switch (ffdc_cfg_byte) {
 	/* iMON Knob, no display, iMON IR + vol knob */
@@ -1738,13 +1738,13 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		allowed_protos = IR_TYPE_RC6;
+		allowed_protos = RC_TYPE_RC6;
 		break;
 	/* iMON LCD, MCE IR */
 	case 0x9f:
 		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_LCD;
-		allowed_protos = IR_TYPE_RC6;
+		allowed_protos = RC_TYPE_RC6;
 		break;
 	default:
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
@@ -1757,7 +1757,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 
 	ictx->display_type = detected_display_type;
 	ictx->rdev->allowed_protos = allowed_protos;
-	ictx->ir_type = allowed_protos;
+	ictx->rc_type = allowed_protos;
 }
 
 static void imon_set_display_type(struct imon_context *ictx)
@@ -1836,10 +1836,10 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 
 	rdev->priv = ictx;
 	rdev->driver_type = RC_DRIVER_SCANCODE;
-	rdev->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
+	rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */
 	rdev->change_protocol = imon_ir_change_protocol;
 	rdev->driver_name = MOD_NAME;
-	if (ictx->ir_type == IR_TYPE_RC6)
+	if (ictx->rc_type == RC_TYPE_RC6)
 		rdev->map_name = RC_MAP_IMON_MCE;
 	else
 		rdev->map_name = RC_MAP_IMON_PAD;
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index 09c143ff33f3..624449afaa61 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -46,7 +46,7 @@ static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
 	struct jvc_dec *data = &dev->raw->jvc;
 
-	if (!(dev->raw->enabled_protocols & IR_TYPE_JVC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_JVC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -173,7 +173,7 @@ out:
 }
 
 static struct ir_raw_handler jvc_handler = {
-	.protocols	= IR_TYPE_JVC,
+	.protocols	= RC_TYPE_JVC,
 	.decode		= ir_jvc_decode,
 };
 
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index f9086c5ba8b1..1e87ee8e5c99 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -34,7 +34,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	struct lirc_codec *lirc = &dev->raw->lirc;
 	int sample;
 
-	if (!(dev->raw->enabled_protocols & IR_TYPE_LIRC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_LIRC))
 		return 0;
 
 	if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
@@ -373,7 +373,7 @@ static int ir_lirc_unregister(struct rc_dev *dev)
 }
 
 static struct ir_raw_handler lirc_handler = {
-	.protocols	= IR_TYPE_LIRC,
+	.protocols	= RC_TYPE_LIRC,
 	.decode		= ir_lirc_decode,
 	.raw_register	= ir_lirc_register,
 	.raw_unregister	= ir_lirc_unregister,
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 235d774d0ec2..5d15c31288b9 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -50,7 +50,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 address, not_address, command, not_command;
 
-	if (!(dev->raw->enabled_protocols & IR_TYPE_NEC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_NEC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -190,7 +190,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler nec_handler = {
-	.protocols	= IR_TYPE_NEC,
+	.protocols	= RC_TYPE_NEC,
 	.decode		= ir_nec_decode,
 };
 
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index 779ab0d0a285..ebdba5539916 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -51,7 +51,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u8 toggle;
 	u32 scancode;
 
-        if (!(dev->raw->enabled_protocols & IR_TYPE_RC5))
+        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -163,7 +163,7 @@ out:
 }
 
 static struct ir_raw_handler rc5_handler = {
-	.protocols	= IR_TYPE_RC5,
+	.protocols	= RC_TYPE_RC5,
 	.decode		= ir_rc5_decode,
 };
 
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index 5586bf20c8d7..90aa8868629a 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -47,7 +47,7 @@ static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u8 toggle, command, system;
 	u32 scancode;
 
-        if (!(dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5_SZ))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -127,7 +127,7 @@ out:
 }
 
 static struct ir_raw_handler rc5_sz_handler = {
-	.protocols	= IR_TYPE_RC5_SZ,
+	.protocols	= RC_TYPE_RC5_SZ,
 	.decode		= ir_rc5_sz_decode,
 };
 
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 88d948728c2f..755dafa3871b 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -81,7 +81,7 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 toggle;
 
-	if (!(dev->raw->enabled_protocols & IR_TYPE_RC6))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_RC6))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -255,7 +255,7 @@ out:
 }
 
 static struct ir_raw_handler rc6_handler = {
-	.protocols	= IR_TYPE_RC6,
+	.protocols	= RC_TYPE_RC6,
 	.decode		= ir_rc6_decode,
 };
 
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 5292b89f8de2..a92de80c48db 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -44,7 +44,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	if (!(dev->raw->enabled_protocols & IR_TYPE_SONY))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_SONY))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -156,7 +156,7 @@ out:
 }
 
 static struct ir_raw_handler sony_handler = {
-	.protocols	= IR_TYPE_SONY,
+	.protocols	= RC_TYPE_SONY,
 	.decode		= ir_sony_decode,
 };
 
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index b17283176ecd..0ea0aeee6e78 100644
--- a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -67,7 +67,7 @@ static struct rc_keymap adstech_dvb_t_pci_map = {
 	.map = {
 		.scan    = adstech_dvb_t_pci,
 		.size    = ARRAY_SIZE(adstech_dvb_t_pci),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ADSTECH_DVB_T_PCI,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
index ddfee7f8093d..b0ec1c81a080 100644
--- a/drivers/media/rc/keymaps/rc-alink-dtu-m.c
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -46,7 +46,7 @@ static struct rc_keymap alink_dtu_m_map = {
 	.map = {
 		.scan    = alink_dtu_m,
 		.size    = ARRAY_SIZE(alink_dtu_m),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_ALINK_DTU_M,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
index 30d70498cfed..9bfe60e663b4 100644
--- a/drivers/media/rc/keymaps/rc-anysee.c
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -71,7 +71,7 @@ static struct rc_keymap anysee_map = {
 	.map = {
 		.scan    = anysee,
 		.size    = ARRAY_SIZE(anysee),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_ANYSEE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
index 0ef2b562baf0..a32840dd4df4 100644
--- a/drivers/media/rc/keymaps/rc-apac-viewcomp.c
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -58,7 +58,7 @@ static struct rc_keymap apac_viewcomp_map = {
 	.map = {
 		.scan    = apac_viewcomp,
 		.size    = ARRAY_SIZE(apac_viewcomp),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_APAC_VIEWCOMP,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
index 2996e0a3b8d5..f86bfb7bf271 100644
--- a/drivers/media/rc/keymaps/rc-asus-pc39.c
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -69,7 +69,7 @@ static struct rc_keymap asus_pc39_map = {
 	.map = {
 		.scan    = asus_pc39,
 		.size    = ARRAY_SIZE(asus_pc39),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_ASUS_PC39,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
index 8edfd293d010..0cefe1c5536d 100644
--- a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -47,7 +47,7 @@ static struct rc_keymap ati_tv_wonder_hd_600_map = {
 	.map = {
 		.scan    = ati_tv_wonder_hd_600,
 		.size    = ARRAY_SIZE(ati_tv_wonder_hd_600),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ATI_TV_WONDER_HD_600,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
index 12f043587f2e..43525c8c111a 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-a16d.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -53,7 +53,7 @@ static struct rc_keymap avermedia_a16d_map = {
 	.map = {
 		.scan    = avermedia_a16d,
 		.size    = ARRAY_SIZE(avermedia_a16d),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_A16D,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
index 2a945b02e8ca..2d528cac2caf 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -75,7 +75,7 @@ static struct rc_keymap avermedia_cardbus_map = {
 	.map = {
 		.scan    = avermedia_cardbus,
 		.size    = ARRAY_SIZE(avermedia_cardbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_CARDBUS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index 39dde6222875..e45b67ffcf3f 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -56,7 +56,7 @@ static struct rc_keymap avermedia_dvbt_map = {
 	.map = {
 		.scan    = avermedia_dvbt,
 		.size    = ARRAY_SIZE(avermedia_dvbt),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_DVBT,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index e4471fb2ad1e..d5622c507d5f 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -125,7 +125,7 @@ static struct rc_keymap avermedia_m135a_map = {
 	.map = {
 		.scan    = avermedia_m135a,
 		.size    = ARRAY_SIZE(avermedia_m135a),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_M135A,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index cf8d45717cb3..b0e10bec82b2 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -73,7 +73,7 @@ static struct rc_keymap avermedia_m733a_rm_k6_map = {
 	.map = {
 		.scan    = avermedia_m733a_rm_k6,
 		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index 9ee60906c861..334846654a55 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -57,7 +57,7 @@ static struct rc_keymap avermedia_rm_ks_map = {
 	.map = {
 		.scan    = avermedia_rm_ks,
 		.size    = ARRAY_SIZE(avermedia_rm_ks),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_RM_KS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
index 21effd5bfb0d..cfde54e15d5c 100644
--- a/drivers/media/rc/keymaps/rc-avermedia.c
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -64,7 +64,7 @@ static struct rc_keymap avermedia_map = {
 	.map = {
 		.scan    = avermedia,
 		.size    = ARRAY_SIZE(avermedia),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
index 971c59d6f9d6..ae586632b48e 100644
--- a/drivers/media/rc/keymaps/rc-avertv-303.c
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -63,7 +63,7 @@ static struct rc_keymap avertv_303_map = {
 	.map = {
 		.scan    = avertv_303,
 		.size    = ARRAY_SIZE(avertv_303),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERTV_303,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
index e0876147d471..579fafedd35a 100644
--- a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -80,7 +80,7 @@ static struct rc_keymap azurewave_ad_tu700_map = {
 	.map = {
 		.scan    = azurewave_ad_tu700,
 		.size    = ARRAY_SIZE(azurewave_ad_tu700),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AZUREWAVE_AD_TU700,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 9f56c98fef5b..6abb712c9e04 100644
--- a/drivers/media/rc/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -86,7 +86,7 @@ static struct rc_keymap behold_columbus_map = {
 	.map = {
 		.scan    = behold_columbus,
 		.size    = ARRAY_SIZE(behold_columbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_BEHOLD_COLUMBUS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index abc140b2098b..5694185a869d 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -119,7 +119,7 @@ static struct rc_keymap behold_map = {
 	.map = {
 		.scan    = behold,
 		.size    = ARRAY_SIZE(behold),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_BEHOLD,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index 64c2ac913338..99f73232c714 100644
--- a/drivers/media/rc/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -70,7 +70,7 @@ static struct rc_keymap budget_ci_old_map = {
 	.map = {
 		.scan    = budget_ci_old,
 		.size    = ARRAY_SIZE(budget_ci_old),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_BUDGET_CI_OLD,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
index 074f2c2c2c61..b504ddd1a922 100644
--- a/drivers/media/rc/keymaps/rc-cinergy-1400.c
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -62,7 +62,7 @@ static struct rc_keymap cinergy_1400_map = {
 	.map = {
 		.scan    = cinergy_1400,
 		.size    = ARRAY_SIZE(cinergy_1400),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_CINERGY_1400,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index cf84c3dba742..8bf02f154339 100644
--- a/drivers/media/rc/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -56,7 +56,7 @@ static struct rc_keymap cinergy_map = {
 	.map = {
 		.scan    = cinergy,
 		.size    = ARRAY_SIZE(cinergy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_CINERGY,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
index ae1832038fbe..47d5476d50e8 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-nec.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -102,7 +102,7 @@ static struct rc_keymap dib0700_nec_map = {
 	.map = {
 		.scan    = dib0700_nec_table,
 		.size    = ARRAY_SIZE(dib0700_nec_table),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIB0700_NEC_TABLE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
index 4a4797cfd77d..1d09921f076f 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-rc5.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -213,7 +213,7 @@ static struct rc_keymap dib0700_rc5_map = {
 	.map = {
 		.scan    = dib0700_rc5_table,
 		.size    = ARRAY_SIZE(dib0700_rc5_table),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_DIB0700_RC5_TABLE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
index 63e469e2dd21..8ae726b568ed 100644
--- a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -76,7 +76,7 @@ static struct rc_keymap digitalnow_tinytwin_map = {
 	.map = {
 		.scan    = digitalnow_tinytwin,
 		.size    = ARRAY_SIZE(digitalnow_tinytwin),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIGITALNOW_TINYTWIN,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
index 5dece78e19c5..206469fb028e 100644
--- a/drivers/media/rc/keymaps/rc-digittrade.c
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -60,7 +60,7 @@ static struct rc_keymap digittrade_map = {
 	.map = {
 		.scan    = digittrade,
 		.size    = ARRAY_SIZE(digittrade),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIGITTRADE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
index 90684d0efea3..ba6fb0be9d3c 100644
--- a/drivers/media/rc/keymaps/rc-dm1105-nec.c
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -54,7 +54,7 @@ static struct rc_keymap dm1105_nec_map = {
 	.map = {
 		.scan    = dm1105_nec,
 		.size    = ARRAY_SIZE(dm1105_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DM1105_NEC,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index 8a4027af964a..b703937f160b 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -56,7 +56,7 @@ static struct rc_keymap dntv_live_dvb_t_map = {
 	.map = {
 		.scan    = dntv_live_dvb_t,
 		.size    = ARRAY_SIZE(dntv_live_dvb_t),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DNTV_LIVE_DVB_T,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
index 6f4d60764d59..b0126b2fceab 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -75,7 +75,7 @@ static struct rc_keymap dntv_live_dvbt_pro_map = {
 	.map = {
 		.scan    = dntv_live_dvbt_pro,
 		.size    = ARRAY_SIZE(dntv_live_dvbt_pro),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DNTV_LIVE_DVBT_PRO,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
index 3130c9c29e6b..57bcd556821d 100644
--- a/drivers/media/rc/keymaps/rc-em-terratec.c
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -47,7 +47,7 @@ static struct rc_keymap em_terratec_map = {
 	.map = {
 		.scan    = em_terratec,
 		.size    = ARRAY_SIZE(em_terratec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EM_TERRATEC,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
index 4b816967877e..97e01f4cb76a 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -59,7 +59,7 @@ static struct rc_keymap encore_enltv_fm53_map = {
 	.map = {
 		.scan    = encore_enltv_fm53,
 		.size    = ARRAY_SIZE(encore_enltv_fm53),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV_FM53,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index 9fabffd28cc9..d3030cf74839 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -90,7 +90,7 @@ static struct rc_keymap encore_enltv_map = {
 	.map = {
 		.scan    = encore_enltv,
 		.size    = ARRAY_SIZE(encore_enltv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index efefd5166618..1871b32efa98 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -68,7 +68,7 @@ static struct rc_keymap encore_enltv2_map = {
 	.map = {
 		.scan    = encore_enltv2,
 		.size    = ARRAY_SIZE(encore_enltv2),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV2,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
index 3f3fb13813b3..192d7f8287f4 100644
--- a/drivers/media/rc/keymaps/rc-evga-indtube.c
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -39,7 +39,7 @@ static struct rc_keymap evga_indtube_map = {
 	.map = {
 		.scan    = evga_indtube,
 		.size    = ARRAY_SIZE(evga_indtube),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EVGA_INDTUBE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
index 660907a78db9..fe3ab5e31a7f 100644
--- a/drivers/media/rc/keymaps/rc-eztv.c
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -74,7 +74,7 @@ static struct rc_keymap eztv_map = {
 	.map = {
 		.scan    = eztv,
 		.size    = ARRAY_SIZE(eztv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EZTV,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index a173c81035f4..f48249e070f5 100644
--- a/drivers/media/rc/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -55,7 +55,7 @@ static struct rc_keymap flydvb_map = {
 	.map = {
 		.scan    = flydvb,
 		.size    = ARRAY_SIZE(flydvb),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FLYDVB,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
index 9c73043cbdba..59713fb46820 100644
--- a/drivers/media/rc/keymaps/rc-flyvideo.c
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -48,7 +48,7 @@ static struct rc_keymap flyvideo_map = {
 	.map = {
 		.scan    = flyvideo,
 		.size    = ARRAY_SIZE(flyvideo),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FLYVIDEO,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
index cdb10389b10e..e69458d8eb1b 100644
--- a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -76,7 +76,7 @@ static struct rc_keymap fusionhdtv_mce_map = {
 	.map = {
 		.scan    = fusionhdtv_mce,
 		.size    = ARRAY_SIZE(fusionhdtv_mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FUSIONHDTV_MCE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
index c16c0d1263ac..13587b8d6a4a 100644
--- a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -59,7 +59,7 @@ static struct rc_keymap gadmei_rm008z_map = {
 	.map = {
 		.scan    = gadmei_rm008z,
 		.size    = ARRAY_SIZE(gadmei_rm008z),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GADMEI_RM008Z,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
index 89f8e384e52a..2304bf677b3d 100644
--- a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -62,7 +62,7 @@ static struct rc_keymap genius_tvgo_a11mce_map = {
 	.map = {
 		.scan    = genius_tvgo_a11mce,
 		.size    = ARRAY_SIZE(genius_tvgo_a11mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GENIUS_TVGO_A11MCE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
index 52f025bb35f6..b5be7bfbb7f0 100644
--- a/drivers/media/rc/keymaps/rc-gotview7135.c
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -57,7 +57,7 @@ static struct rc_keymap gotview7135_map = {
 	.map = {
 		.scan    = gotview7135,
 		.size    = ARRAY_SIZE(gotview7135),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GOTVIEW7135,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
index c6f8cd7c5186..c60f845dd930 100644
--- a/drivers/media/rc/keymaps/rc-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c
@@ -78,7 +78,7 @@ static struct rc_keymap hauppauge_new_map = {
 	.map = {
 		.scan    = hauppauge_new,
 		.size    = ARRAY_SIZE(hauppauge_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_HAUPPAUGE_NEW,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index e49f350e3a0d..4ce902f87701 100644
--- a/drivers/media/rc/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -120,7 +120,7 @@ static struct rc_keymap imon_mce_map = {
 		.scan    = imon_mce,
 		.size    = ARRAY_SIZE(imon_mce),
 		/* its RC6, but w/a hardware decoder */
-		.ir_type = IR_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6,
 		.name    = RC_MAP_IMON_MCE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index bc4db72f02e6..6d4633af4393 100644
--- a/drivers/media/rc/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -134,7 +134,7 @@ static struct rc_keymap imon_pad_map = {
 		.scan    = imon_pad,
 		.size    = ARRAY_SIZE(imon_pad),
 		/* actual protocol details unknown, hardware decoder */
-		.ir_type = IR_TYPE_OTHER,
+		.rc_type = RC_TYPE_OTHER,
 		.name    = RC_MAP_IMON_PAD,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
index ef6600259fc0..c5208f10e7c0 100644
--- a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -66,7 +66,7 @@ static struct rc_keymap iodata_bctv7e_map = {
 	.map = {
 		.scan    = iodata_bctv7e,
 		.size    = ARRAY_SIZE(iodata_bctv7e),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_IODATA_BCTV7E,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
index 4c7883ba0f15..1b6da7ffb8f1 100644
--- a/drivers/media/rc/keymaps/rc-kaiomy.c
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -65,7 +65,7 @@ static struct rc_keymap kaiomy_map = {
 	.map = {
 		.scan    = kaiomy,
 		.size    = ARRAY_SIZE(kaiomy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_KAIOMY,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index 618c817374e6..3418e075938c 100644
--- a/drivers/media/rc/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -61,7 +61,7 @@ static struct rc_keymap kworld_315u_map = {
 	.map = {
 		.scan    = kworld_315u,
 		.size    = ARRAY_SIZE(kworld_315u),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_KWORLD_315U,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index 366732f1f7b7..4d681eb7aaf4 100644
--- a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -77,7 +77,7 @@ static struct rc_keymap kworld_plus_tv_analog_map = {
 	.map = {
 		.scan    = kworld_plus_tv_analog,
 		.size    = ARRAY_SIZE(kworld_plus_tv_analog),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_KWORLD_PLUS_TV_ANALOG,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
index 7521315fd876..ebdd1226bada 100644
--- a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -77,7 +77,7 @@ static struct rc_keymap leadtek_y04g0051_map = {
 	.map = {
 		.scan    = leadtek_y04g0051,
 		.size    = ARRAY_SIZE(leadtek_y04g0051),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_LEADTEK_Y04G0051,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 9c8577d6e497..6d8a64170fd9 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -19,7 +19,7 @@ static struct rc_keymap lirc_map = {
 	.map = {
 		.scan    = lirc,
 		.size    = ARRAY_SIZE(lirc),
-		.ir_type = IR_TYPE_LIRC,
+		.rc_type = RC_TYPE_LIRC,
 		.name    = RC_MAP_LIRC,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 40dcf0b4e21a..ca7e2acb682a 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -46,7 +46,7 @@ static struct rc_keymap lme2510_map = {
 	.map = {
 		.scan    = lme2510_rc,
 		.size    = ARRAY_SIZE(lme2510_rc),
-		.ir_type = IR_TYPE_UNKNOWN,
+		.rc_type = RC_TYPE_UNKNOWN,
 		.name    = RC_MAP_LME2510,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
index 0f590b3d01c0..056cf52dce60 100644
--- a/drivers/media/rc/keymaps/rc-manli.c
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -112,7 +112,7 @@ static struct rc_keymap manli_map = {
 	.map = {
 		.scan    = manli,
 		.size    = ARRAY_SIZE(manli),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MANLI,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index 67237fbf9e4b..3a14d31bec4d 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -45,7 +45,7 @@ static struct rc_keymap msi_digivox_ii_map = {
 	.map = {
 		.scan    = msi_digivox_ii,
 		.size    = ARRAY_SIZE(msi_digivox_ii),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_MSI_DIGIVOX_II,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
index 882056e52ef9..16c5b0aa8c43 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -63,7 +63,7 @@ static struct rc_keymap msi_digivox_iii_map = {
 	.map = {
 		.scan    = msi_digivox_iii,
 		.size    = ARRAY_SIZE(msi_digivox_iii),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_MSI_DIGIVOX_III,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index eb8e42c18ff9..d4c91020fc07 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -101,7 +101,7 @@ static struct rc_keymap msi_tvanywhere_plus_map = {
 	.map = {
 		.scan    = msi_tvanywhere_plus,
 		.size    = ARRAY_SIZE(msi_tvanywhere_plus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MSI_TVANYWHERE_PLUS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index ef411854f067..aec064cb7b15 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -47,7 +47,7 @@ static struct rc_keymap msi_tvanywhere_map = {
 	.map = {
 		.scan    = msi_tvanywhere,
 		.size    = ARRAY_SIZE(msi_tvanywhere),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MSI_TVANYWHERE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index ccc50eb402ec..2c44b90d48c9 100644
--- a/drivers/media/rc/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -74,7 +74,7 @@ static struct rc_keymap nebula_map = {
 	.map = {
 		.scan    = nebula,
 		.size    = ARRAY_SIZE(nebula),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NEBULA,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
index e1b54d20db60..929084bcaa4d 100644
--- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -83,7 +83,7 @@ static struct rc_keymap nec_terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = nec_terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(nec_terratec_cinergy_xs),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index e5849a6b3f05..7fe774628edc 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -63,7 +63,7 @@ static struct rc_keymap norwood_map = {
 	.map = {
 		.scan    = norwood,
 		.size    = ARRAY_SIZE(norwood),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NORWOOD,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
index b9ece1e90296..a9cbcde98a30 100644
--- a/drivers/media/rc/keymaps/rc-npgtech.c
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -58,7 +58,7 @@ static struct rc_keymap npgtech_map = {
 	.map = {
 		.scan    = npgtech,
 		.size    = ARRAY_SIZE(npgtech),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NPGTECH,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index 4129bb44a25b..68b33b31f6bf 100644
--- a/drivers/media/rc/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -58,7 +58,7 @@ static struct rc_keymap pctv_sedna_map = {
 	.map = {
 		.scan    = pctv_sedna,
 		.size    = ARRAY_SIZE(pctv_sedna),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PCTV_SEDNA,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
index 326e023ce126..364ccde87a04 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-color.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -72,7 +72,7 @@ static struct rc_keymap pinnacle_color_map = {
 	.map = {
 		.scan    = pinnacle_color,
 		.size    = ARRAY_SIZE(pinnacle_color),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_COLOR,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
index 14cb772515c6..993eff72f233 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-grey.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -67,7 +67,7 @@ static struct rc_keymap pinnacle_grey_map = {
 	.map = {
 		.scan    = pinnacle_grey,
 		.size    = ARRAY_SIZE(pinnacle_grey),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_GREY,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index 835bf4ef8de7..56e6a7e203ec 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -51,7 +51,7 @@ static struct rc_keymap pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_PCTV_HD,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 5a735d569a8b..84f89ebd8998 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -61,7 +61,7 @@ static struct rc_keymap pixelview_map = {
 	.map = {
 		.scan    = pixelview_mk12,
 		.size    = ARRAY_SIZE(pixelview_mk12),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_PIXELVIEW_MK12,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index 7bbbbf5735e6..703f86bca132 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -61,7 +61,7 @@ static struct rc_keymap pixelview_new_map = {
 	.map = {
 		.scan    = pixelview_new,
 		.size    = ARRAY_SIZE(pixelview_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PIXELVIEW_NEW,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 82ff12e182a0..5a50aa7e411d 100644
--- a/drivers/media/rc/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -60,7 +60,7 @@ static struct rc_keymap pixelview_map = {
 	.map = {
 		.scan    = pixelview,
 		.size    = ARRAY_SIZE(pixelview),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PIXELVIEW,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
index 7cef8190a224..4eec4371f7d1 100644
--- a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -59,7 +59,7 @@ static struct rc_keymap powercolor_real_angel_map = {
 	.map = {
 		.scan    = powercolor_real_angel,
 		.size    = ARRAY_SIZE(powercolor_real_angel),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_POWERCOLOR_REAL_ANGEL,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
index 22e92d39dee5..802c58a0ae26 100644
--- a/drivers/media/rc/keymaps/rc-proteus-2309.c
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -47,7 +47,7 @@ static struct rc_keymap proteus_2309_map = {
 	.map = {
 		.scan    = proteus_2309,
 		.size    = ARRAY_SIZE(proteus_2309),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PROTEUS_2309,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
index 4e20fc2269f7..f3e9709b7c1f 100644
--- a/drivers/media/rc/keymaps/rc-purpletv.c
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -59,7 +59,7 @@ static struct rc_keymap purpletv_map = {
 	.map = {
 		.scan    = purpletv,
 		.size    = ARRAY_SIZE(purpletv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PURPLETV,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index 36679e706cf3..e301ff033af1 100644
--- a/drivers/media/rc/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -56,7 +56,7 @@ static struct rc_keymap pv951_map = {
 	.map = {
 		.scan    = pv951,
 		.size    = ARRAY_SIZE(pv951),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PV951,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
index cc6b8f548747..91bcab8bd266 100644
--- a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -81,7 +81,7 @@ static struct rc_keymap rc5_hauppauge_new_map = {
 	.map = {
 		.scan    = rc5_hauppauge_new,
 		.size    = ARRAY_SIZE(rc5_hauppauge_new),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_RC5_HAUPPAUGE_NEW,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
index 73cce2f8ddfb..cda2a2fae04d 100644
--- a/drivers/media/rc/keymaps/rc-rc5-tv.c
+++ b/drivers/media/rc/keymaps/rc-rc5-tv.c
@@ -59,7 +59,7 @@ static struct rc_keymap rc5_tv_map = {
 	.map = {
 		.scan    = rc5_tv,
 		.size    = ARRAY_SIZE(rc5_tv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_RC5_TV,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 6da955dfef48..f926477a0562 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -91,7 +91,7 @@ static struct rc_keymap rc6_mce_map = {
 	.map = {
 		.scan    = rc6_mce,
 		.size    = ARRAY_SIZE(rc6_mce),
-		.ir_type = IR_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6,
 		.name    = RC_MAP_RC6_MCE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index ab1a6d2baf72..678142659183 100644
--- a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -56,7 +56,7 @@ static struct rc_keymap real_audio_220_32_keys_map = {
 	.map = {
 		.scan    = real_audio_220_32_keys,
 		.size    = ARRAY_SIZE(real_audio_220_32_keys),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_REAL_AUDIO_220_32_KEYS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
index df32013a321c..bafe5b8f4192 100644
--- a/drivers/media/rc/keymaps/rc-streamzap.c
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -60,7 +60,7 @@ static struct rc_keymap streamzap_map = {
 	.map = {
 		.scan    = streamzap,
 		.size    = ARRAY_SIZE(streamzap),
-		.ir_type = IR_TYPE_RC5_SZ,
+		.rc_type = RC_TYPE_RC5_SZ,
 		.name    = RC_MAP_STREAMZAP,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
index 3309631e6f80..4ef4f811d011 100644
--- a/drivers/media/rc/keymaps/rc-tbs-nec.c
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -51,7 +51,7 @@ static struct rc_keymap tbs_nec_map = {
 	.map = {
 		.scan    = tbs_nec,
 		.size    = ARRAY_SIZE(tbs_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TBS_NEC,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
index 5326a0b444c1..4064a32569e2 100644
--- a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -70,7 +70,7 @@ static struct rc_keymap terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(terratec_cinergy_xs),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TERRATEC_CINERGY_XS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
index 10dee4c1deff..c23caf70036b 100644
--- a/drivers/media/rc/keymaps/rc-terratec-slim.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -57,7 +57,7 @@ static struct rc_keymap terratec_slim_map = {
 	.map = {
 		.scan    = terratec_slim,
 		.size    = ARRAY_SIZE(terratec_slim),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TERRATEC_SLIM,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
index e30d411c07bb..eabfb70973b5 100644
--- a/drivers/media/rc/keymaps/rc-tevii-nec.c
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -66,7 +66,7 @@ static struct rc_keymap tevii_nec_map = {
 	.map = {
 		.scan    = tevii_nec,
 		.size    = ARRAY_SIZE(tevii_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TEVII_NEC,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
index fd1985763781..cd39b3dbab06 100644
--- a/drivers/media/rc/keymaps/rc-total-media-in-hand.c
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -63,7 +63,7 @@ static struct rc_keymap total_media_in_hand_map = {
 	.map = {
 		.scan    = total_media_in_hand,
 		.size    = ARRAY_SIZE(total_media_in_hand),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TOTAL_MEDIA_IN_HAND,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
index 91092caca452..31d6c6c23642 100644
--- a/drivers/media/rc/keymaps/rc-trekstor.c
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -58,7 +58,7 @@ static struct rc_keymap trekstor_map = {
 	.map = {
 		.scan    = trekstor,
 		.size    = ARRAY_SIZE(trekstor),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TREKSTOR,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
index bc88de011d5d..45a060850e53 100644
--- a/drivers/media/rc/keymaps/rc-tt-1500.c
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -60,7 +60,7 @@ static struct rc_keymap tt_1500_map = {
 	.map = {
 		.scan    = tt_1500,
 		.size    = ARRAY_SIZE(tt_1500),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TT_1500,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
index 0b5d356c2d84..b5def5387ded 100644
--- a/drivers/media/rc/keymaps/rc-twinhan1027.c
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -65,7 +65,7 @@ static struct rc_keymap twinhan_vp1027_map = {
 	.map = {
 		.scan    = twinhan_vp1027,
 		.size    = ARRAY_SIZE(twinhan_vp1027),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TWINHAN_VP1027_DVBS,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
index 4df7fcd1d2fc..7c422b4670fa 100644
--- a/drivers/media/rc/keymaps/rc-videomate-s350.c
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -63,7 +63,7 @@ static struct rc_keymap videomate_s350_map = {
 	.map = {
 		.scan    = videomate_s350,
 		.size    = ARRAY_SIZE(videomate_s350),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_VIDEOMATE_S350,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
index 776b0a638d87..4d31b47dfc30 100644
--- a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -65,7 +65,7 @@ static struct rc_keymap videomate_tv_pvr_map = {
 	.map = {
 		.scan    = videomate_tv_pvr,
 		.size    = ARRAY_SIZE(videomate_tv_pvr),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_VIDEOMATE_TV_PVR,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
index 9d2d550aaa90..ade3c14c4c0f 100644
--- a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -60,7 +60,7 @@ static struct rc_keymap winfast_usbii_deluxe_map = {
 	.map = {
 		.scan    = winfast_usbii_deluxe,
 		.size    = ARRAY_SIZE(winfast_usbii_deluxe),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_WINFAST_USBII_DELUXE,
 	}
 };
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index 0e90a3bd9499..502b5f54f84e 100644
--- a/drivers/media/rc/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -80,7 +80,7 @@ static struct rc_keymap winfast_map = {
 	.map = {
 		.scan    = winfast,
 		.size    = ARRAY_SIZE(winfast),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_WINFAST,
 	}
 };
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index db7787ac67a3..c2cb58a0c6ed 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1060,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 	rc->dev.parent = dev;
 	rc->priv = ir;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = IR_TYPE_ALL;
+	rc->allowed_protos = RC_TYPE_ALL;
 	rc->timeout = MS_TO_NS(1000);
 	if (!ir->flags.no_tx) {
 		rc->s_tx_mask = mceusb_set_tx_mask;
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3f58f7bd7c..7fca6d1549ed 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -1060,7 +1060,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	/* Set up the rc device */
 	rdev->priv = nvt;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->allowed_protos = RC_TYPE_ALL;
 	rdev->open = nvt_open;
 	rdev->close = nvt_close;
 	rdev->tx_ir = nvt_tx_ir;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 11e2703ef1c4..f3244eba66c6 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -102,7 +102,7 @@ static struct rc_keymap empty_map = {
 	.map = {
 		.scan    = empty,
 		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EMPTY,
 	}
 };
@@ -111,7 +111,7 @@ static struct rc_keymap empty_map = {
  * ir_create_table() - initializes a scancode table
  * @rc_tab:	the ir_scancode_table to initialize
  * @name:	name to assign to the table
- * @ir_type:	ir type to assign to the new table
+ * @rc_type:	ir type to assign to the new table
  * @size:	initial size of the table
  * @return:	zero on success or a negative error code
  *
@@ -119,10 +119,10 @@ static struct rc_keymap empty_map = {
  * memory to hold at least the specified number of elements.
  */
 static int ir_create_table(struct ir_scancode_table *rc_tab,
-			   const char *name, u64 ir_type, size_t size)
+			   const char *name, u64 rc_type, size_t size)
 {
 	rc_tab->name = name;
-	rc_tab->ir_type = ir_type;
+	rc_tab->rc_type = rc_type;
 	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
 	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
 	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
@@ -372,7 +372,7 @@ static int ir_setkeytable(struct rc_dev *dev,
 	int rc;
 
 	rc = ir_create_table(rc_tab, from->name,
-			     from->ir_type, from->size);
+			     from->rc_type, from->size);
 	if (rc)
 		return rc;
 
@@ -719,14 +719,14 @@ static struct {
 	u64	type;
 	char	*name;
 } proto_names[] = {
-	{ IR_TYPE_UNKNOWN,	"unknown"	},
-	{ IR_TYPE_RC5,		"rc-5"		},
-	{ IR_TYPE_NEC,		"nec"		},
-	{ IR_TYPE_RC6,		"rc-6"		},
-	{ IR_TYPE_JVC,		"jvc"		},
-	{ IR_TYPE_SONY,		"sony"		},
-	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ IR_TYPE_LIRC,		"lirc"		},
+	{ RC_TYPE_UNKNOWN,	"unknown"	},
+	{ RC_TYPE_RC5,		"rc-5"		},
+	{ RC_TYPE_NEC,		"nec"		},
+	{ RC_TYPE_RC6,		"rc-6"		},
+	{ RC_TYPE_JVC,		"jvc"		},
+	{ RC_TYPE_SONY,		"sony"		},
+	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ RC_TYPE_LIRC,		"lirc"		},
 };
 
 #define PROTO_NONE	"none"
@@ -755,7 +755,7 @@ static ssize_t show_protocols(struct device *device,
 		return -EINVAL;
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = dev->rc_tab.ir_type;
+		enabled = dev->rc_tab.rc_type;
 		allowed = dev->allowed_protos;
 	} else {
 		enabled = dev->raw->enabled_protocols;
@@ -813,7 +813,7 @@ static ssize_t store_protocols(struct device *device,
 		return -EINVAL;
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE)
-		type = dev->rc_tab.ir_type;
+		type = dev->rc_tab.rc_type;
 	else if (dev->raw)
 		type = dev->raw->enabled_protocols;
 	else {
@@ -881,7 +881,7 @@ static ssize_t store_protocols(struct device *device,
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE) {
 		spin_lock_irqsave(&dev->rc_tab.lock, flags);
-		dev->rc_tab.ir_type = type;
+		dev->rc_tab.rc_type = type;
 		spin_unlock_irqrestore(&dev->rc_tab.lock, flags);
 	} else {
 		dev->raw->enabled_protocols = type;
@@ -1052,7 +1052,7 @@ int rc_register_device(struct rc_dev *dev)
 	}
 
 	if (dev->change_protocol) {
-		rc = dev->change_protocol(dev, rc_tab->ir_type);
+		rc = dev->change_protocol(dev, rc_tab->rc_type);
 		if (rc < 0)
 			goto out_raw;
 	}
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index ea2cb636a193..7814ec709bfc 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -318,7 +318,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 	rdev->input_phys = sz->phys;
 	rdev->priv = sz;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = IR_TYPE_ALL;
+	rdev->allowed_protos = RC_TYPE_ALL;
 	rdev->driver_name = DRIVER_NAME;
 	rdev->map_name = RC_MAP_STREAMZAP;
 
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index e71a026f3419..c330fb917b50 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -98,7 +98,7 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
 	case CX18_HW_Z8F0811_IR_RX_HAUP:
 		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
 		init_data->name = cx->card_name;
 		info.platform_data = init_data;
 		break;
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 1d043ed1bc32..c236a4e7e97b 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -84,7 +84,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
 	dev->init_data.rc_dev->scanmask = 0xff;
 	dev->init_data.rc_dev->driver_name = "cx231xx";
-	dev->init_data.type = IR_TYPE_NEC;
+	dev->init_data.type = RC_TYPE_NEC;
 	info.addr = 0x30;
 
 	/* Load and bind ir-kbd-i2c */
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index e824ba63fdde..0b0d0664382a 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -264,14 +264,14 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/* Integrated CX2388[58] IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = IR_TYPE_ALL;
+		allowed_protos = RC_TYPE_ALL;
 		/* The grey Hauppauge RC-5 remote */
 		rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
 		break;
 	case CX23885_BOARD_TEVII_S470:
 		/* Integrated CX23885 IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = IR_TYPE_ALL;
+		allowed_protos = RC_TYPE_ALL;
 		/* A guess at the remote */
 		rc_map = RC_MAP_TEVII_NEC;
 		break;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index cfeba4c08715..4a3bf5476c71 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -241,7 +241,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	struct cx88_IR *ir;
 	struct rc_dev *dev;
 	char *ir_codes = NULL;
-	u64 ir_type = IR_TYPE_OTHER;
+	u64 rc_type = RC_TYPE_OTHER;
 	int err = -ENOMEM;
 	u32 hardware_mask = 0;	/* For devices with a hardware mask, when
 				 * used with a full-code IR table
@@ -404,7 +404,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_TWINHAN_VP1027_DVBS:
 		ir_codes         = RC_MAP_TWINHAN_VP1027_DVBS;
-		ir_type          = IR_TYPE_NEC;
+		rc_type          = RC_TYPE_NEC;
 		ir->sampling     = 0xff00; /* address */
 		break;
 	}
@@ -457,7 +457,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		dev->timeout = 10 * 1000 * 1000; /* 10 ms */
 	} else {
 		dev->driver_type = RC_DRIVER_SCANCODE;
-		dev->allowed_protos = ir_type;
+		dev->allowed_protos = rc_type;
 	}
 
 	ir->core = core;
@@ -557,7 +557,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 			/* Hauppauge XVR */
 			core->init_data.name = "cx88 Hauppauge XVR remote";
 			core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
-			core->init_data.type = IR_TYPE_RC5;
+			core->init_data.type = RC_TYPE_RC5;
 			core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
 
 			info.platform_data = &core->init_data;
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index e32eb38564e6..29cc74441a7d 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -343,7 +343,7 @@ static void em28xx_ir_stop(struct rc_dev *rc)
 	cancel_delayed_work_sync(&ir->work);
 }
 
-int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
 {
 	int rc = 0;
 	struct em28xx_IR *ir = rc_dev->priv;
@@ -352,14 +352,14 @@ int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 ir_type)
 
 	/* Adjust xclk based o IR table for RC5/NEC tables */
 
-	if (ir_type == IR_TYPE_RC5) {
+	if (rc_type == RC_TYPE_RC5) {
 		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
 		ir->full_code = 1;
-	} else if (ir_type == IR_TYPE_NEC) {
+	} else if (rc_type == RC_TYPE_NEC) {
 		dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
 		ir_config = EM2874_IR_NEC;
 		ir->full_code = 1;
-	} else if (ir_type != IR_TYPE_UNKNOWN)
+	} else if (rc_type != RC_TYPE_UNKNOWN)
 		rc = -EINVAL;
 
 	em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
@@ -408,14 +408,14 @@ int em28xx_ir_init(struct em28xx *dev)
 	 * em2874 supports more protocols. For now, let's just announce
 	 * the two protocols that were already tested
 	 */
-	rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
 	rc->priv = ir;
 	rc->change_protocol = em28xx_ir_change_protocol;
 	rc->open = em28xx_ir_start;
 	rc->close = em28xx_ir_stop;
 
 	/* By default, keep protocol field untouched */
-	err = em28xx_ir_change_protocol(rc, IR_TYPE_UNKNOWN);
+	err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
 	if (err)
 		goto err_out_free;
 
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index c77ea53f50d7..dd54c3dae054 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -269,7 +269,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	char *ir_codes = NULL;
 	const char *name = NULL;
-	u64 ir_type = IR_TYPE_UNKNOWN;
+	u64 rc_type = RC_TYPE_UNKNOWN;
 	struct IR_i2c *ir;
 	struct rc_dev *rc = NULL;
 	struct i2c_adapter *adap = client->adapter;
@@ -288,7 +288,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x64:
 		name        = "Pixelview";
 		ir->get_key = get_key_pixelview;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x18:
@@ -296,7 +296,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x1a:
 		name        = "Hauppauge";
 		ir->get_key = get_key_haup;
-		ir_type     = IR_TYPE_RC5;
+		rc_type     = RC_TYPE_RC5;
 		if (hauppauge == 1) {
 			ir_codes    = RC_MAP_HAUPPAUGE_NEW;
 		} else {
@@ -306,19 +306,19 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x30:
 		name        = "KNC One";
 		ir->get_key = get_key_knc1;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x6b:
 		name        = "FusionHDTV";
 		ir->get_key = get_key_fusionhdtv;
-		ir_type     = IR_TYPE_RC5;
+		rc_type     = RC_TYPE_RC5;
 		ir_codes    = RC_MAP_FUSIONHDTV_MCE;
 		break;
 	case 0x40:
 		name        = "AVerMedia Cardbus remote";
 		ir->get_key = get_key_avermedia_cardbus;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_AVERMEDIA_CARDBUS;
 		break;
 	}
@@ -333,7 +333,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 		name = init_data->name;
 		if (init_data->type)
-			ir_type = init_data->type;
+			rc_type = init_data->type;
 
 		if (init_data->polling_interval)
 			ir->polling_interval = init_data->polling_interval;
@@ -378,7 +378,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	ir->rc = rc;
 
 	/* Make sure we are all setup before going on */
-	if (!name || !ir->get_key || !ir_type || !ir_codes) {
+	if (!name || !ir->get_key || !rc_type || !ir_codes) {
 		dprintk(1, ": Unsupported device at address 0x%02x\n",
 			addr);
 		err = -ENODEV;
@@ -405,7 +405,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * Initialize the other fields of rc_dev
 	 */
 	rc->map_name       = ir->ir_codes;
-	rc->allowed_protos = ir_type;
+	rc->allowed_protos = rc_type;
 	if (!rc->driver_name)
 		rc->driver_name = MODULE_NAME;
 
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 665191c9b407..68170924448c 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -172,7 +172,7 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
 		init_data->internal_get_key_func =
 					IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
-		init_data->type = IR_TYPE_OTHER;
+		init_data->type = RC_TYPE_OTHER;
 		init_data->name = "AVerMedia AVerTV card";
 		break;
 	case IVTV_HW_I2C_IR_RX_HAUP_EXT:
@@ -180,14 +180,14 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		/* Default to old black remote */
 		init_data->ir_codes = RC_MAP_RC5_TV;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
 		init_data->name = itv->card_name;
 		break;
 	case IVTV_HW_Z8F0811_IR_RX_HAUP:
 		/* Default to grey remote */
 		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
 		init_data->name = itv->card_name;
 		break;
 	}
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index cd39aea30389..f3f4aff2761e 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -909,7 +909,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		dev->init_data.name = "BeholdTV";
 		dev->init_data.get_key = get_key_beholdm6xx;
 		dev->init_data.ir_codes = RC_MAP_BEHOLD;
-		dev->init_data.type = IR_TYPE_NEC;
+		dev->init_data.type = RC_TYPE_NEC;
 		info.addr = 0x2d;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
-- 
cgit v1.2.3


From b088ba658b3438056dab4d744701364db3f08b9a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 14:28:27 -0300
Subject: [media] rc: Properly name the rc_map struct

The struct that describes a rc mapping had an weird and long name.
We should properly name it, to make easier for developers to work
with it, and to avoid confusion.

Basically, generated by this script:

for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode_table,rc_map,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_tab,rc_map,g <$i >a && mv a $i; done

(and manually fixed where needed)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/rc-main.c            | 212 +++++++++++++++++-----------------
 drivers/media/video/cx231xx/cx231xx.h |   2 +-
 2 files changed, 107 insertions(+), 107 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f3244eba66c6..caa8d70de726 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -47,7 +47,7 @@ static struct rc_keymap *seek_rc_map(const char *name)
 	return NULL;
 }
 
-struct ir_scancode_table *get_rc_map(const char *name)
+struct rc_map *get_rc_map(const char *name)
 {
 
 	struct rc_keymap *map;
@@ -109,71 +109,71 @@ static struct rc_keymap empty_map = {
 
 /**
  * ir_create_table() - initializes a scancode table
- * @rc_tab:	the ir_scancode_table to initialize
+ * @rc_map:	the rc_map to initialize
  * @name:	name to assign to the table
  * @rc_type:	ir type to assign to the new table
  * @size:	initial size of the table
  * @return:	zero on success or a negative error code
  *
- * This routine will initialize the ir_scancode_table and will allocate
+ * This routine will initialize the rc_map and will allocate
  * memory to hold at least the specified number of elements.
  */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
+static int ir_create_table(struct rc_map *rc_map,
 			   const char *name, u64 rc_type, size_t size)
 {
-	rc_tab->name = name;
-	rc_tab->rc_type = rc_type;
-	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
-	if (!rc_tab->scan)
+	rc_map->name = name;
+	rc_map->rc_type = rc_type;
+	rc_map->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+	rc_map->size = rc_map->alloc / sizeof(struct ir_scancode);
+	rc_map->scan = kmalloc(rc_map->alloc, GFP_KERNEL);
+	if (!rc_map->scan)
 		return -ENOMEM;
 
 	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
+		   rc_map->size, rc_map->alloc);
 	return 0;
 }
 
 /**
  * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab:	the table whose mappings need to be freed
+ * @rc_map:	the table whose mappings need to be freed
  *
  * This routine will free memory alloctaed for key mappings used by given
  * scancode table.
  */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
+static void ir_free_table(struct rc_map *rc_map)
 {
-	rc_tab->size = 0;
-	kfree(rc_tab->scan);
-	rc_tab->scan = NULL;
+	rc_map->size = 0;
+	kfree(rc_map->scan);
+	rc_map->scan = NULL;
 }
 
 /**
  * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab:	the ir_scancode_table to resize
+ * @rc_map:	the rc_map to resize
  * @gfp_flags:	gfp flags to use when allocating memory
  * @return:	zero on success or a negative error code
  *
- * This routine will shrink the ir_scancode_table if it has lots of
+ * This routine will shrink the rc_map if it has lots of
  * unused entries and grow it if it is full.
  */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
+static int ir_resize_table(struct rc_map *rc_map, gfp_t gfp_flags)
 {
-	unsigned int oldalloc = rc_tab->alloc;
+	unsigned int oldalloc = rc_map->alloc;
 	unsigned int newalloc = oldalloc;
-	struct ir_scancode *oldscan = rc_tab->scan;
+	struct ir_scancode *oldscan = rc_map->scan;
 	struct ir_scancode *newscan;
 
-	if (rc_tab->size == rc_tab->len) {
+	if (rc_map->size == rc_map->len) {
 		/* All entries in use -> grow keytable */
-		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+		if (rc_map->alloc >= IR_TAB_MAX_SIZE)
 			return -ENOMEM;
 
 		newalloc *= 2;
 		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
 	}
 
-	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+	if ((rc_map->len * 3 < rc_map->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
 		/* Less than 1/3 of entries in use -> shrink keytable */
 		newalloc /= 2;
 		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
@@ -188,10 +188,10 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
 		return -ENOMEM;
 	}
 
-	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
-	rc_tab->scan = newscan;
-	rc_tab->alloc = newalloc;
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+	memcpy(newscan, rc_map->scan, rc_map->len * sizeof(struct ir_scancode));
+	rc_map->scan = newscan;
+	rc_map->alloc = newalloc;
+	rc_map->size = rc_map->alloc / sizeof(struct ir_scancode);
 	kfree(oldscan);
 	return 0;
 }
@@ -199,7 +199,7 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
 /**
  * ir_update_mapping() - set a keycode in the scancode->keycode table
  * @dev:	the struct rc_dev device descriptor
- * @rc_tab:	scancode table to be adjusted
+ * @rc_map:	scancode table to be adjusted
  * @index:	index of the mapping that needs to be updated
  * @keycode:	the desired keycode
  * @return:	previous keycode assigned to the mapping
@@ -208,26 +208,26 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
  * position.
  */
 static unsigned int ir_update_mapping(struct rc_dev *dev,
-				      struct ir_scancode_table *rc_tab,
+				      struct rc_map *rc_map,
 				      unsigned int index,
 				      unsigned int new_keycode)
 {
-	int old_keycode = rc_tab->scan[index].keycode;
+	int old_keycode = rc_map->scan[index].keycode;
 	int i;
 
 	/* Did the user wish to remove the mapping? */
 	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
 		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
-			   index, rc_tab->scan[index].scancode);
-		rc_tab->len--;
-		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
-			(rc_tab->len - index) * sizeof(struct ir_scancode));
+			   index, rc_map->scan[index].scancode);
+		rc_map->len--;
+		memmove(&rc_map->scan[index], &rc_map->scan[index+ 1],
+			(rc_map->len - index) * sizeof(struct ir_scancode));
 	} else {
 		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
 			   index,
 			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
-			   rc_tab->scan[index].scancode, new_keycode);
-		rc_tab->scan[index].keycode = new_keycode;
+			   rc_map->scan[index].scancode, new_keycode);
+		rc_map->scan[index].keycode = new_keycode;
 		__set_bit(new_keycode, dev->input_dev->keybit);
 	}
 
@@ -235,15 +235,15 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
 		/* A previous mapping was updated... */
 		__clear_bit(old_keycode, dev->input_dev->keybit);
 		/* ... but another scancode might use the same keycode */
-		for (i = 0; i < rc_tab->len; i++) {
-			if (rc_tab->scan[i].keycode == old_keycode) {
+		for (i = 0; i < rc_map->len; i++) {
+			if (rc_map->scan[i].keycode == old_keycode) {
 				__set_bit(old_keycode, dev->input_dev->keybit);
 				break;
 			}
 		}
 
 		/* Possibly shrink the keytable, failure is not a problem */
-		ir_resize_table(rc_tab, GFP_ATOMIC);
+		ir_resize_table(rc_map, GFP_ATOMIC);
 	}
 
 	return old_keycode;
@@ -252,19 +252,19 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
 /**
  * ir_establish_scancode() - set a keycode in the scancode->keycode table
  * @dev:	the struct rc_dev device descriptor
- * @rc_tab:	scancode table to be searched
+ * @rc_map:	scancode table to be searched
  * @scancode:	the desired scancode
  * @resize:	controls whether we allowed to resize the table to
  *		accomodate not yet present scancodes
  * @return:	index of the mapping containing scancode in question
  *		or -1U in case of failure.
  *
- * This routine is used to locate given scancode in ir_scancode_table.
+ * This routine is used to locate given scancode in rc_map.
  * If scancode is not yet present the routine will allocate a new slot
  * for it.
  */
 static unsigned int ir_establish_scancode(struct rc_dev *dev,
-					  struct ir_scancode_table *rc_tab,
+					  struct rc_map *rc_map,
 					  unsigned int scancode,
 					  bool resize)
 {
@@ -282,28 +282,28 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
 		scancode &= dev->scanmask;
 
 	/* First check if we already have a mapping for this ir command */
-	for (i = 0; i < rc_tab->len; i++) {
-		if (rc_tab->scan[i].scancode == scancode)
+	for (i = 0; i < rc_map->len; i++) {
+		if (rc_map->scan[i].scancode == scancode)
 			return i;
 
 		/* Keytable is sorted from lowest to highest scancode */
-		if (rc_tab->scan[i].scancode >= scancode)
+		if (rc_map->scan[i].scancode >= scancode)
 			break;
 	}
 
 	/* No previous mapping found, we might need to grow the table */
-	if (rc_tab->size == rc_tab->len) {
-		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+	if (rc_map->size == rc_map->len) {
+		if (!resize || ir_resize_table(rc_map, GFP_ATOMIC))
 			return -1U;
 	}
 
 	/* i is the proper index to insert our new keycode */
-	if (i < rc_tab->len)
-		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
-			(rc_tab->len - i) * sizeof(struct ir_scancode));
-	rc_tab->scan[i].scancode = scancode;
-	rc_tab->scan[i].keycode = KEY_RESERVED;
-	rc_tab->len++;
+	if (i < rc_map->len)
+		memmove(&rc_map->scan[i + 1], &rc_map->scan[i],
+			(rc_map->len - i) * sizeof(struct ir_scancode));
+	rc_map->scan[i].scancode = scancode;
+	rc_map->scan[i].keycode = KEY_RESERVED;
+	rc_map->len++;
 
 	return i;
 }
@@ -322,17 +322,17 @@ static int ir_setkeycode(struct input_dev *idev,
 			 unsigned int *old_keycode)
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
-	struct ir_scancode_table *rc_tab = &rdev->rc_tab;
+	struct rc_map *rc_map = &rdev->rc_map;
 	unsigned int index;
 	unsigned int scancode;
 	int retval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&rc_tab->lock, flags);
+	spin_lock_irqsave(&rc_map->lock, flags);
 
 	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
 		index = ke->index;
-		if (index >= rc_tab->len) {
+		if (index >= rc_map->len) {
 			retval = -EINVAL;
 			goto out;
 		}
@@ -341,83 +341,83 @@ static int ir_setkeycode(struct input_dev *idev,
 		if (retval)
 			goto out;
 
-		index = ir_establish_scancode(rdev, rc_tab, scancode, true);
-		if (index >= rc_tab->len) {
+		index = ir_establish_scancode(rdev, rc_map, scancode, true);
+		if (index >= rc_map->len) {
 			retval = -ENOMEM;
 			goto out;
 		}
 	}
 
-	*old_keycode = ir_update_mapping(rdev, rc_tab, index, ke->keycode);
+	*old_keycode = ir_update_mapping(rdev, rc_map, index, ke->keycode);
 
 out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	spin_unlock_irqrestore(&rc_map->lock, flags);
 	return retval;
 }
 
 /**
  * ir_setkeytable() - sets several entries in the scancode->keycode table
  * @dev:	the struct rc_dev device descriptor
- * @to:		the struct ir_scancode_table to copy entries to
- * @from:	the struct ir_scancode_table to copy entries from
+ * @to:		the struct rc_map to copy entries to
+ * @from:	the struct rc_map to copy entries from
  * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
  *
  * This routine is used to handle table initialization.
  */
 static int ir_setkeytable(struct rc_dev *dev,
-			  const struct ir_scancode_table *from)
+			  const struct rc_map *from)
 {
-	struct ir_scancode_table *rc_tab = &dev->rc_tab;
+	struct rc_map *rc_map = &dev->rc_map;
 	unsigned int i, index;
 	int rc;
 
-	rc = ir_create_table(rc_tab, from->name,
+	rc = ir_create_table(rc_map, from->name,
 			     from->rc_type, from->size);
 	if (rc)
 		return rc;
 
 	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
+		   rc_map->size, rc_map->alloc);
 
 	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(dev, rc_tab,
+		index = ir_establish_scancode(dev, rc_map,
 					      from->scan[i].scancode, false);
-		if (index >= rc_tab->len) {
+		if (index >= rc_map->len) {
 			rc = -ENOMEM;
 			break;
 		}
 
-		ir_update_mapping(dev, rc_tab, index,
+		ir_update_mapping(dev, rc_map, index,
 				  from->scan[i].keycode);
 	}
 
 	if (rc)
-		ir_free_table(rc_tab);
+		ir_free_table(rc_map);
 
 	return rc;
 }
 
 /**
  * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab:	the struct ir_scancode_table to search
+ * @rc_map:	the struct rc_map to search
  * @scancode:	scancode to look for in the table
  * @return:	index in the table, -1U if not found
  *
  * This routine performs binary search in RC keykeymap table for
  * given scancode.
  */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+static unsigned int ir_lookup_by_scancode(const struct rc_map *rc_map,
 					  unsigned int scancode)
 {
 	int start = 0;
-	int end = rc_tab->len - 1;
+	int end = rc_map->len - 1;
 	int mid;
 
 	while (start <= end) {
 		mid = (start + end) / 2;
-		if (rc_tab->scan[mid].scancode < scancode)
+		if (rc_map->scan[mid].scancode < scancode)
 			start = mid + 1;
-		else if (rc_tab->scan[mid].scancode > scancode)
+		else if (rc_map->scan[mid].scancode > scancode)
 			end = mid - 1;
 		else
 			return mid;
@@ -439,14 +439,14 @@ static int ir_getkeycode(struct input_dev *idev,
 			 struct input_keymap_entry *ke)
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
-	struct ir_scancode_table *rc_tab = &rdev->rc_tab;
+	struct rc_map *rc_map = &rdev->rc_map;
 	struct ir_scancode *entry;
 	unsigned long flags;
 	unsigned int index;
 	unsigned int scancode;
 	int retval;
 
-	spin_lock_irqsave(&rc_tab->lock, flags);
+	spin_lock_irqsave(&rc_map->lock, flags);
 
 	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
 		index = ke->index;
@@ -455,10 +455,10 @@ static int ir_getkeycode(struct input_dev *idev,
 		if (retval)
 			goto out;
 
-		index = ir_lookup_by_scancode(rc_tab, scancode);
+		index = ir_lookup_by_scancode(rc_map, scancode);
 	}
 
-	if (index >= rc_tab->len) {
+	if (index >= rc_map->len) {
 		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
 			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
 				   scancode);
@@ -466,7 +466,7 @@ static int ir_getkeycode(struct input_dev *idev,
 		goto out;
 	}
 
-	entry = &rc_tab->scan[index];
+	entry = &rc_map->scan[index];
 
 	ke->index = index;
 	ke->keycode = entry->keycode;
@@ -476,7 +476,7 @@ static int ir_getkeycode(struct input_dev *idev,
 	retval = 0;
 
 out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	spin_unlock_irqrestore(&rc_map->lock, flags);
 	return retval;
 }
 
@@ -492,18 +492,18 @@ out:
  */
 u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 {
-	struct ir_scancode_table *rc_tab = &dev->rc_tab;
+	struct rc_map *rc_map = &dev->rc_map;
 	unsigned int keycode;
 	unsigned int index;
 	unsigned long flags;
 
-	spin_lock_irqsave(&rc_tab->lock, flags);
+	spin_lock_irqsave(&rc_map->lock, flags);
 
-	index = ir_lookup_by_scancode(rc_tab, scancode);
-	keycode = index < rc_tab->len ?
-			rc_tab->scan[index].keycode : KEY_RESERVED;
+	index = ir_lookup_by_scancode(rc_map, scancode);
+	keycode = index < rc_map->len ?
+			rc_map->scan[index].keycode : KEY_RESERVED;
 
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
+	spin_unlock_irqrestore(&rc_map->lock, flags);
 
 	if (keycode != KEY_RESERVED)
 		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
@@ -755,7 +755,7 @@ static ssize_t show_protocols(struct device *device,
 		return -EINVAL;
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = dev->rc_tab.rc_type;
+		enabled = dev->rc_map.rc_type;
 		allowed = dev->allowed_protos;
 	} else {
 		enabled = dev->raw->enabled_protocols;
@@ -813,7 +813,7 @@ static ssize_t store_protocols(struct device *device,
 		return -EINVAL;
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE)
-		type = dev->rc_tab.rc_type;
+		type = dev->rc_map.rc_type;
 	else if (dev->raw)
 		type = dev->raw->enabled_protocols;
 	else {
@@ -880,9 +880,9 @@ static ssize_t store_protocols(struct device *device,
 	}
 
 	if (dev->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&dev->rc_tab.lock, flags);
-		dev->rc_tab.rc_type = type;
-		spin_unlock_irqrestore(&dev->rc_tab.lock, flags);
+		spin_lock_irqsave(&dev->rc_map.lock, flags);
+		dev->rc_map.rc_type = type;
+		spin_unlock_irqrestore(&dev->rc_map.lock, flags);
 	} else {
 		dev->raw->enabled_protocols = type;
 	}
@@ -912,8 +912,8 @@ static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 {
 	struct rc_dev *dev = to_rc_dev(device);
 
-	if (dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", dev->rc_tab.name);
+	if (dev->rc_map.name)
+		ADD_HOTPLUG_VAR("NAME=%s", dev->rc_map.name);
 	if (dev->driver_name)
 		ADD_HOTPLUG_VAR("DRV_NAME=%s", dev->driver_name);
 
@@ -964,7 +964,7 @@ struct rc_dev *rc_allocate_device(void)
 	dev->input_dev->setkeycode_new = ir_setkeycode;
 	input_set_drvdata(dev->input_dev, dev);
 
-	spin_lock_init(&dev->rc_tab.lock);
+	spin_lock_init(&dev->rc_map.lock);
 	spin_lock_init(&dev->keylock);
 	setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
 
@@ -989,17 +989,17 @@ EXPORT_SYMBOL_GPL(rc_free_device);
 int rc_register_device(struct rc_dev *dev)
 {
 	static atomic_t devno = ATOMIC_INIT(0);
-	struct ir_scancode_table *rc_tab;
+	struct rc_map *rc_map;
 	const char *path;
 	int rc;
 
 	if (!dev || !dev->map_name)
 		return -EINVAL;
 
-	rc_tab = get_rc_map(dev->map_name);
-	if (!rc_tab)
-		rc_tab = get_rc_map(RC_MAP_EMPTY);
-	if (!rc_tab || !rc_tab->scan || rc_tab->size == 0)
+	rc_map = get_rc_map(dev->map_name);
+	if (!rc_map)
+		rc_map = get_rc_map(RC_MAP_EMPTY);
+	if (!rc_map || !rc_map->scan || rc_map->size == 0)
 		return -EINVAL;
 
 	set_bit(EV_KEY, dev->input_dev->evbit);
@@ -1018,7 +1018,7 @@ int rc_register_device(struct rc_dev *dev)
 	if (rc)
 		return rc;
 
-	rc = ir_setkeytable(dev, rc_tab);
+	rc = ir_setkeytable(dev, rc_map);
 	if (rc)
 		goto out_dev;
 
@@ -1052,7 +1052,7 @@ int rc_register_device(struct rc_dev *dev)
 	}
 
 	if (dev->change_protocol) {
-		rc = dev->change_protocol(dev, rc_tab->rc_type);
+		rc = dev->change_protocol(dev, rc_map->rc_type);
 		if (rc < 0)
 			goto out_raw;
 	}
@@ -1060,7 +1060,7 @@ int rc_register_device(struct rc_dev *dev)
 	IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
 		   dev->devno,
 		   dev->driver_name ? dev->driver_name : "unknown",
-		   rc_tab->name ? rc_tab->name : "unknown",
+		   rc_map->name ? rc_map->name : "unknown",
 		   dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
 
 	return 0;
@@ -1072,7 +1072,7 @@ out_input:
 	input_unregister_device(dev->input_dev);
 	dev->input_dev = NULL;
 out_table:
-	ir_free_table(&dev->rc_tab);
+	ir_free_table(&dev->rc_map);
 out_dev:
 	device_del(&dev->dev);
 	return rc;
@@ -1092,7 +1092,7 @@ void rc_unregister_device(struct rc_dev *dev)
 	input_unregister_device(dev->input_dev);
 	dev->input_dev = NULL;
 
-	ir_free_table(&dev->rc_tab);
+	ir_free_table(&dev->rc_map);
 	IR_dprintk(1, "Freed keycode table\n");
 
 	device_unregister(&dev->dev);
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index 709cb87a7762..72bbea2bcd56 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -362,7 +362,7 @@ struct cx231xx_board {
 
 	struct cx231xx_input input[MAX_CX231XX_INPUT];
 	struct cx231xx_input radio;
-	struct ir_scancode_table *ir_codes;
+	struct rc_map *ir_codes;
 };
 
 /* device states */
-- 
cgit v1.2.3


From 2f4f58d689dd71dea67407b74405a3c43e797cb1 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 15:46:09 -0300
Subject: [media] rc: Name RC keymap tables as rc_map_table

Remote keytables had different names all over the place. Part of the fault
is due to a bad naming when rc subsystem was created, but there were lots
of old names that were still here.

Use a common standard for everything.

Patch generated by this script:

for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/a800.c                   |  6 +--
 drivers/media/dvb/dvb-usb/af9005-remote.c          | 16 +++---
 drivers/media/dvb/dvb-usb/af9005.c                 | 16 +++---
 drivers/media/dvb/dvb-usb/af9005.h                 |  4 +-
 drivers/media/dvb/dvb-usb/az6027.c                 |  6 +--
 drivers/media/dvb/dvb-usb/cinergyT2-core.c         |  6 +--
 drivers/media/dvb/dvb-usb/cxusb.c                  | 62 +++++++++++-----------
 drivers/media/dvb/dvb-usb/dibusb-common.c          |  4 +-
 drivers/media/dvb/dvb-usb/dibusb-mb.c              | 16 +++---
 drivers/media/dvb/dvb-usb/dibusb-mc.c              |  4 +-
 drivers/media/dvb/dvb-usb/dibusb.h                 |  2 +-
 drivers/media/dvb/dvb-usb/digitv.c                 | 14 ++---
 drivers/media/dvb/dvb-usb/dtt200u.c                | 18 +++----
 drivers/media/dvb/dvb-usb/dvb-usb-remote.c         | 26 ++++-----
 drivers/media/dvb/dvb-usb/dvb-usb.h                | 14 ++---
 drivers/media/dvb/dvb-usb/dw2102.c                 | 54 +++++++++----------
 drivers/media/dvb/dvb-usb/m920x.c                  | 24 ++++-----
 drivers/media/dvb/dvb-usb/nova-t-usb2.c            | 18 +++----
 drivers/media/dvb/dvb-usb/opera1.c                 | 16 +++---
 drivers/media/dvb/dvb-usb/vp702x.c                 | 12 ++---
 drivers/media/dvb/dvb-usb/vp7045.c                 | 12 ++---
 drivers/media/dvb/mantis/mantis_input.c            |  2 +-
 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c    |  2 +-
 drivers/media/rc/keymaps/rc-alink-dtu-m.c          |  2 +-
 drivers/media/rc/keymaps/rc-anysee.c               |  2 +-
 drivers/media/rc/keymaps/rc-apac-viewcomp.c        |  2 +-
 drivers/media/rc/keymaps/rc-asus-pc39.c            |  2 +-
 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-a16d.c       |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-cardbus.c    |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-dvbt.c       |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-m135a.c      |  2 +-
 .../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c    |  2 +-
 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c      |  2 +-
 drivers/media/rc/keymaps/rc-avermedia.c            |  2 +-
 drivers/media/rc/keymaps/rc-avertv-303.c           |  2 +-
 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c   |  2 +-
 drivers/media/rc/keymaps/rc-behold-columbus.c      |  2 +-
 drivers/media/rc/keymaps/rc-behold.c               |  2 +-
 drivers/media/rc/keymaps/rc-budget-ci-old.c        |  2 +-
 drivers/media/rc/keymaps/rc-cinergy-1400.c         |  2 +-
 drivers/media/rc/keymaps/rc-cinergy.c              |  2 +-
 drivers/media/rc/keymaps/rc-dib0700-nec.c          |  2 +-
 drivers/media/rc/keymaps/rc-dib0700-rc5.c          |  2 +-
 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c  |  2 +-
 drivers/media/rc/keymaps/rc-digittrade.c           |  2 +-
 drivers/media/rc/keymaps/rc-dm1105-nec.c           |  2 +-
 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c      |  2 +-
 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c   |  2 +-
 drivers/media/rc/keymaps/rc-em-terratec.c          |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c    |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv.c         |  2 +-
 drivers/media/rc/keymaps/rc-encore-enltv2.c        |  2 +-
 drivers/media/rc/keymaps/rc-evga-indtube.c         |  2 +-
 drivers/media/rc/keymaps/rc-eztv.c                 |  2 +-
 drivers/media/rc/keymaps/rc-flydvb.c               |  2 +-
 drivers/media/rc/keymaps/rc-flyvideo.c             |  2 +-
 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c       |  2 +-
 drivers/media/rc/keymaps/rc-gadmei-rm008z.c        |  2 +-
 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c   |  2 +-
 drivers/media/rc/keymaps/rc-gotview7135.c          |  2 +-
 drivers/media/rc/keymaps/rc-hauppauge-new.c        |  2 +-
 drivers/media/rc/keymaps/rc-imon-mce.c             |  2 +-
 drivers/media/rc/keymaps/rc-imon-pad.c             |  2 +-
 drivers/media/rc/keymaps/rc-iodata-bctv7e.c        |  2 +-
 drivers/media/rc/keymaps/rc-kaiomy.c               |  2 +-
 drivers/media/rc/keymaps/rc-kworld-315u.c          |  2 +-
 .../media/rc/keymaps/rc-kworld-plus-tv-analog.c    |  2 +-
 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c     |  2 +-
 drivers/media/rc/keymaps/rc-lirc.c                 |  2 +-
 drivers/media/rc/keymaps/rc-lme2510.c              |  2 +-
 drivers/media/rc/keymaps/rc-manli.c                |  2 +-
 drivers/media/rc/keymaps/rc-msi-digivox-ii.c       |  2 +-
 drivers/media/rc/keymaps/rc-msi-digivox-iii.c      |  2 +-
 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c  |  2 +-
 drivers/media/rc/keymaps/rc-msi-tvanywhere.c       |  2 +-
 drivers/media/rc/keymaps/rc-nebula.c               |  2 +-
 .../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c  |  2 +-
 drivers/media/rc/keymaps/rc-norwood.c              |  2 +-
 drivers/media/rc/keymaps/rc-npgtech.c              |  2 +-
 drivers/media/rc/keymaps/rc-pctv-sedna.c           |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-color.c       |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-grey.c        |  2 +-
 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c     |  2 +-
 drivers/media/rc/keymaps/rc-pixelview-mk12.c       |  2 +-
 drivers/media/rc/keymaps/rc-pixelview-new.c        |  2 +-
 drivers/media/rc/keymaps/rc-pixelview.c            |  2 +-
 .../media/rc/keymaps/rc-powercolor-real-angel.c    |  2 +-
 drivers/media/rc/keymaps/rc-proteus-2309.c         |  2 +-
 drivers/media/rc/keymaps/rc-purpletv.c             |  2 +-
 drivers/media/rc/keymaps/rc-pv951.c                |  2 +-
 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c    |  2 +-
 drivers/media/rc/keymaps/rc-rc5-tv.c               |  2 +-
 drivers/media/rc/keymaps/rc-rc6-mce.c              |  2 +-
 .../media/rc/keymaps/rc-real-audio-220-32-keys.c   |  2 +-
 drivers/media/rc/keymaps/rc-streamzap.c            |  2 +-
 drivers/media/rc/keymaps/rc-tbs-nec.c              |  2 +-
 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c  |  2 +-
 drivers/media/rc/keymaps/rc-terratec-slim.c        |  2 +-
 drivers/media/rc/keymaps/rc-tevii-nec.c            |  2 +-
 drivers/media/rc/keymaps/rc-total-media-in-hand.c  |  2 +-
 drivers/media/rc/keymaps/rc-trekstor.c             |  2 +-
 drivers/media/rc/keymaps/rc-tt-1500.c              |  2 +-
 drivers/media/rc/keymaps/rc-twinhan1027.c          |  2 +-
 drivers/media/rc/keymaps/rc-videomate-s350.c       |  2 +-
 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c     |  2 +-
 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c |  2 +-
 drivers/media/rc/keymaps/rc-winfast.c              |  2 +-
 drivers/media/rc/rc-main.c                         | 20 +++----
 109 files changed, 272 insertions(+), 272 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index a5c363727133..53b93a4b6f8a 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -37,7 +37,7 @@ static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_pr
 	return 0;
 }
 
-static struct ir_scancode ir_codes_a800_table[] = {
+static struct rc_map_table rc_map_a800_table[] = {
 	{ 0x0201, KEY_PROG1 },       /* SOURCE */
 	{ 0x0200, KEY_POWER },       /* POWER */
 	{ 0x0205, KEY_1 },           /* 1 */
@@ -148,8 +148,8 @@ static struct dvb_usb_device_properties a800_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_a800_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_a800_table),
+		.rc_map_table     = rc_map_a800_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_a800_table),
 		.rc_query         = a800_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index 696207fe37ec..c3bc64ed405c 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -33,7 +33,7 @@ MODULE_PARM_DESC(debug,
 
 #define deb_decode(args...)   dprintk(dvb_usb_af9005_remote_debug,0x01,args)
 
-struct ir_scancode ir_codes_af9005_table[] = {
+struct rc_map_table rc_map_af9005_table[] = {
 
 	{0x01b7, KEY_POWER},
 	{0x01a7, KEY_VOLUMEUP},
@@ -74,7 +74,7 @@ struct ir_scancode ir_codes_af9005_table[] = {
 	{0x00d5, KEY_GOTO},	/* marked jump on the remote */
 };
 
-int ir_codes_af9005_table_size = ARRAY_SIZE(ir_codes_af9005_table);
+int rc_map_af9005_table_size = ARRAY_SIZE(rc_map_af9005_table);
 
 static int repeatable_keys[] = {
 	KEY_VOLUMEUP,
@@ -130,10 +130,10 @@ int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
 				deb_decode("code != inverted code\n");
 				return 0;
 			}
-			for (i = 0; i < ir_codes_af9005_table_size; i++) {
-				if (rc5_custom(&ir_codes_af9005_table[i]) == cust
-				    && rc5_data(&ir_codes_af9005_table[i]) == dat) {
-					*event = ir_codes_af9005_table[i].keycode;
+			for (i = 0; i < rc_map_af9005_table_size; i++) {
+				if (rc5_custom(&rc_map_af9005_table[i]) == cust
+				    && rc5_data(&rc_map_af9005_table[i]) == dat) {
+					*event = rc_map_af9005_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					deb_decode
 					    ("key pressed, event %x\n", *event);
@@ -146,8 +146,8 @@ int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
 	return 0;
 }
 
-EXPORT_SYMBOL(ir_codes_af9005_table);
-EXPORT_SYMBOL(ir_codes_af9005_table_size);
+EXPORT_SYMBOL(rc_map_af9005_table);
+EXPORT_SYMBOL(rc_map_af9005_table_size);
 EXPORT_SYMBOL(af9005_rc_decode);
 
 MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>");
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 8ecba8848bcf..51f6439dcfd5 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -1027,8 +1027,8 @@ static struct dvb_usb_device_properties af9005_properties = {
 
 	.rc.legacy = {
 		.rc_interval = 200,
-		.rc_key_map = NULL,
-		.rc_key_map_size = 0,
+		.rc_map_table = NULL,
+		.rc_map_size = 0,
 		.rc_query = af9005_rc_query,
 	},
 
@@ -1070,14 +1070,14 @@ static int __init af9005_usb_module_init(void)
 		return result;
 	}
 	rc_decode = symbol_request(af9005_rc_decode);
-	rc_keys = symbol_request(ir_codes_af9005_table);
-	rc_keys_size = symbol_request(ir_codes_af9005_table_size);
+	rc_keys = symbol_request(rc_map_af9005_table);
+	rc_keys_size = symbol_request(rc_map_af9005_table_size);
 	if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) {
 		err("af9005_rc_decode function not found, disabling remote");
 		af9005_properties.rc.legacy.rc_query = NULL;
 	} else {
-		af9005_properties.rc.legacy.rc_key_map = rc_keys;
-		af9005_properties.rc.legacy.rc_key_map_size = *rc_keys_size;
+		af9005_properties.rc.legacy.rc_map_table = rc_keys;
+		af9005_properties.rc.legacy.rc_map_size = *rc_keys_size;
 	}
 
 	return 0;
@@ -1089,9 +1089,9 @@ static void __exit af9005_usb_module_exit(void)
 	if (rc_decode != NULL)
 		symbol_put(af9005_rc_decode);
 	if (rc_keys != NULL)
-		symbol_put(ir_codes_af9005_table);
+		symbol_put(rc_map_af9005_table);
 	if (rc_keys_size != NULL)
-		symbol_put(ir_codes_af9005_table_size);
+		symbol_put(rc_map_af9005_table_size);
 	/* deregister this driver from the USB subsystem */
 	usb_deregister(&af9005_usb_driver);
 }
diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h
index 3c1fbd1c5d60..c71c77bd7f4b 100644
--- a/drivers/media/dvb/dvb-usb/af9005.h
+++ b/drivers/media/dvb/dvb-usb/af9005.h
@@ -3490,7 +3490,7 @@ extern u8 regmask[8];
 /* remote control decoder */
 extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len,
 			    u32 * event, int *state);
-extern struct ir_scancode ir_codes_af9005_table[];
-extern int ir_codes_af9005_table_size;
+extern struct rc_map_table rc_map_af9005_table[];
+extern int rc_map_af9005_table_size;
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 62c58288469f..9a7837fcfd7f 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -386,7 +386,7 @@ static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct ir_scancode ir_codes_az6027_table[] = {
+static struct rc_map_table rc_map_az6027_table[] = {
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
 };
@@ -1126,8 +1126,8 @@ static struct dvb_usb_device_properties az6027_properties = {
 	.read_mac_address = az6027_read_mac_addr,
  */
 	.rc.legacy = {
-		.rc_key_map       = ir_codes_az6027_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_az6027_table),
+		.rc_map_table     = rc_map_az6027_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_az6027_table),
 		.rc_interval      = 400,
 		.rc_query         = az6027_rc_query,
 	},
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
index 4f5aa83fc1fc..16f2ce2bc15a 100644
--- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
@@ -84,7 +84,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_cinergyt2_table[] = {
+static struct rc_map_table rc_map_cinergyt2_table[] = {
 	{ 0x0401, KEY_POWER },
 	{ 0x0402, KEY_1 },
 	{ 0x0403, KEY_2 },
@@ -219,8 +219,8 @@ static struct dvb_usb_device_properties cinergyt2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 50,
-		.rc_key_map       = ir_codes_cinergyt2_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_cinergyt2_table),
+		.rc_map_table     = rc_map_cinergyt2_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_cinergyt2_table),
 		.rc_query         = cinergyt2_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index cd9f362c37b2..acb5fb2d2e73 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -385,7 +385,7 @@ static int cxusb_d680_dmb_streaming_ctrl(
 
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[4];
 	int i;
 
@@ -394,7 +394,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[2] &&
 		    rc5_data(&keymap[i]) == ircode[3]) {
 			*event = keymap[i].keycode;
@@ -410,7 +410,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 				    int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[4];
 	int i;
 	struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
@@ -422,7 +422,7 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1)
 		return 0;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[1] &&
 		    rc5_data(&keymap[i]) == ircode[2]) {
 			*event = keymap[i].keycode;
@@ -438,7 +438,7 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 		int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[2];
 	int i;
 
@@ -448,7 +448,7 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
 		return 0;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[0] &&
 		    rc5_data(&keymap[i]) == ircode[1]) {
 			*event = keymap[i].keycode;
@@ -461,7 +461,7 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	return 0;
 }
 
-static struct ir_scancode ir_codes_dvico_mce_table[] = {
+static struct rc_map_table rc_map_dvico_mce_table[] = {
 	{ 0xfe02, KEY_TV },
 	{ 0xfe0e, KEY_MP3 },
 	{ 0xfe1a, KEY_DVD },
@@ -509,7 +509,7 @@ static struct ir_scancode ir_codes_dvico_mce_table[] = {
 	{ 0xfe4e, KEY_POWER },
 };
 
-static struct ir_scancode ir_codes_dvico_portable_table[] = {
+static struct rc_map_table rc_map_dvico_portable_table[] = {
 	{ 0xfc02, KEY_SETUP },       /* Profile */
 	{ 0xfc43, KEY_POWER2 },
 	{ 0xfc06, KEY_EPG },
@@ -548,7 +548,7 @@ static struct ir_scancode ir_codes_dvico_portable_table[] = {
 	{ 0xfc00, KEY_UNKNOWN },    /* HD */
 };
 
-static struct ir_scancode ir_codes_d680_dmb_table[] = {
+static struct rc_map_table rc_map_d680_dmb_table[] = {
 	{ 0x0038, KEY_UNKNOWN },	/* TV/AV */
 	{ 0x080c, KEY_ZOOM },
 	{ 0x0800, KEY_0 },
@@ -923,7 +923,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 		return -EIO;
 
 	/* try to determine if there is no IR decoder on the I2C bus */
-	for (i = 0; adap->dev->props.rc.legacy.rc_key_map != NULL && i < 5; i++) {
+	for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) {
 		msleep(20);
 		if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1)
 			goto no_IR;
@@ -931,7 +931,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 			continue;
 		if (ircode[2] + ircode[3] != 0xff) {
 no_IR:
-			adap->dev->props.rc.legacy.rc_key_map = NULL;
+			adap->dev->props.rc.legacy.rc_map_table = NULL;
 			info("No IR receiver detected on this device.");
 			break;
 		}
@@ -1453,8 +1453,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1506,8 +1506,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 150,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1567,8 +1567,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1619,8 +1619,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1670,8 +1670,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_bluebird2_rc_query,
 	},
 
@@ -1720,8 +1720,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_bluebird2_rc_query,
 	},
 
@@ -1772,8 +1772,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1865,8 +1865,8 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1915,8 +1915,8 @@ static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_d680_dmb_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_map_table     = rc_map_d680_dmb_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
 		.rc_query         = cxusb_d680_dmb_rc_query,
 	},
 
@@ -1966,8 +1966,8 @@ static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_d680_dmb_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_map_table     = rc_map_d680_dmb_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
 		.rc_query         = cxusb_d680_dmb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index ba991aa21aff..956f7ae2e510 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -327,7 +327,7 @@ EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
 /*
  * common remote control stuff
  */
-struct ir_scancode ir_codes_dibusb_table[] = {
+struct rc_map_table rc_map_dibusb_table[] = {
 	/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
@@ -456,7 +456,7 @@ struct ir_scancode ir_codes_dibusb_table[] = {
 	{ 0x804e, KEY_ENTER },
 	{ 0x804f, KEY_VOLUMEDOWN },
 };
-EXPORT_SYMBOL(ir_codes_dibusb_table);
+EXPORT_SYMBOL(rc_map_dibusb_table);
 
 int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index 8e3c0d2cce16..04d91bdd3562 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -213,8 +213,8 @@ static struct dvb_usb_device_properties dibusb1_1_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -299,8 +299,8 @@ static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -365,8 +365,8 @@ static struct dvb_usb_device_properties dibusb2_0b_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -424,8 +424,8 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index 1cbc41cb4e8f..c1d9094b61e5 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -83,8 +83,8 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* FIXME */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* FIXME */
 		.rc_query         = dibusb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h
index 61a6bf389472..e47c321b3ffc 100644
--- a/drivers/media/dvb/dvb-usb/dibusb.h
+++ b/drivers/media/dvb/dvb-usb/dibusb.h
@@ -124,7 +124,7 @@ extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int);
 #define DEFAULT_RC_INTERVAL 150
 //#define DEFAULT_RC_INTERVAL 100000
 
-extern struct ir_scancode ir_codes_dibusb_table[];
+extern struct rc_map_table rc_map_dibusb_table[];
 extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *);
 extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *);
 
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index 13d006bb19db..f2dbce7edb3b 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -161,7 +161,7 @@ static int digitv_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_digitv_table[] = {
+static struct rc_map_table rc_map_digitv_table[] = {
 	{ 0x5f55, KEY_0 },
 	{ 0x6f55, KEY_1 },
 	{ 0x9f55, KEY_2 },
@@ -237,10 +237,10 @@ static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)
 	{
-		  for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
-			if (rc5_custom(&d->props.rc.legacy.rc_key_map[i]) == key[1] &&
-			    rc5_data(&d->props.rc.legacy.rc_key_map[i]) == key[2]) {
-				*event = d->props.rc.legacy.rc_key_map[i].keycode;
+		  for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
+			if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] &&
+			    rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) {
+				*event = d->props.rc.legacy.rc_map_table[i].keycode;
 				*state = REMOTE_KEY_PRESSED;
 				return 0;
 			}
@@ -312,8 +312,8 @@ static struct dvb_usb_device_properties digitv_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 1000,
-		.rc_key_map       = ir_codes_digitv_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_digitv_table),
+		.rc_map_table     = rc_map_digitv_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_digitv_table),
 		.rc_query         = digitv_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index ca495e07f35c..ecd86eca2548 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -57,7 +57,7 @@ static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
 
 /* remote control */
 /* key list for the tiny remote control (Yakumo, don't know about the others) */
-static struct ir_scancode ir_codes_dtt200u_table[] = {
+static struct rc_map_table rc_map_dtt200u_table[] = {
 	{ 0x8001, KEY_MUTE },
 	{ 0x8002, KEY_CHANNELDOWN },
 	{ 0x8003, KEY_VOLUMEDOWN },
@@ -163,8 +163,8 @@ static struct dvb_usb_device_properties dtt200u_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -210,8 +210,8 @@ static struct dvb_usb_device_properties wt220u_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table      = rc_map_dtt200u_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -257,8 +257,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -304,8 +304,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index bbba149a2ceb..c6498f536dff 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -13,11 +13,11 @@ static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	int i;
 
 	/* See if we can match the raw key code. */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].scancode == scancode) {
 			*keycode = keymap[i].keycode;
 			return 0;
@@ -28,7 +28,7 @@ static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
 	 * otherwise, input core won't let legacy_dvb_usb_setkeycode
 	 * to work
 	 */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].keycode == KEY_RESERVED ||
 		    keymap[i].keycode == KEY_UNKNOWN) {
 			*keycode = KEY_RESERVED;
@@ -43,18 +43,18 @@ static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	int i;
 
 	/* Search if it is replacing an existing keycode */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].scancode == scancode) {
 			keymap[i].keycode = keycode;
 			return 0;
 		}
 
 	/* Search if is there a clean entry. If so, use it */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].keycode == KEY_RESERVED ||
 		    keymap[i].keycode == KEY_UNKNOWN) {
 			keymap[i].scancode = scancode;
@@ -175,11 +175,11 @@ static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
 	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
 
 	/* set the bits for the keys */
-	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_key_map_size);
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size);
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		deb_rc("setting bit for event %d item %d\n",
-			d->props.rc.legacy.rc_key_map[i].keycode, i);
-		set_bit(d->props.rc.legacy.rc_key_map[i].keycode, input_dev->keybit);
+			d->props.rc.legacy.rc_map_table[i].keycode, i);
+		set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit);
 	}
 
 	/* setting these two values to non-zero, we have to manage key repeats */
@@ -284,7 +284,7 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	if (dvb_usb_disable_rc_polling)
 		return 0;
 
-	if (d->props.rc.legacy.rc_key_map && d->props.rc.legacy.rc_query)
+	if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query)
 		d->props.rc.mode = DVB_RC_LEGACY;
 	else if (d->props.rc.core.rc_codes)
 		d->props.rc.mode = DVB_RC_CORE;
@@ -331,7 +331,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 		u8 keybuf[5], u32 *event, int *state)
 {
 	int i;
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 	switch (keybuf[0]) {
@@ -344,7 +344,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 				break;
 			}
 			/* See if we can match the raw key code. */
-			for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+			for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 				if (rc5_custom(&keymap[i]) == keybuf[1] &&
 					rc5_data(&keymap[i]) == keybuf[3]) {
 					*event = keymap[i].keycode;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 95b1603d5be8..65fa9268e7f7 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -75,17 +75,17 @@ struct dvb_usb_device_description {
 	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
 };
 
-static inline u8 rc5_custom(struct ir_scancode *key)
+static inline u8 rc5_custom(struct rc_map_table *key)
 {
 	return (key->scancode >> 8) & 0xff;
 }
 
-static inline u8 rc5_data(struct ir_scancode *key)
+static inline u8 rc5_data(struct rc_map_table *key)
 {
 	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct ir_scancode *key)
+static inline u8 rc5_scan(struct rc_map_table *key)
 {
 	return key->scancode & 0xffff;
 }
@@ -159,9 +159,9 @@ struct dvb_usb_adapter_properties {
 
 /**
  * struct dvb_rc_legacy - old properties of remote controller
- * @rc_key_map: a hard-wired array of struct ir_scancode (NULL to disable
+ * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
  *  remote control handling).
- * @rc_key_map_size: number of items in @rc_key_map.
+ * @rc_map_size: number of items in @rc_map_table.
  * @rc_query: called to query an event event.
  * @rc_interval: time in ms between two queries.
  */
@@ -170,8 +170,8 @@ struct dvb_rc_legacy {
 #define REMOTE_NO_KEY_PRESSED      0x00
 #define REMOTE_KEY_PRESSED         0x01
 #define REMOTE_KEY_REPEAT          0x02
-	struct ir_scancode  *rc_key_map;
-	int rc_key_map_size;
+	struct rc_map_table  *rc_map_table;
+	int rc_map_size;
 	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
 	int rc_interval;
 };
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 774df88dc6e3..2c307ba0d28b 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -73,8 +73,8 @@
 		"Please see linux/Documentation/dvb/ for more details " \
 		"on firmware-problems."
 
-struct ir_codes_dvb_usb_table_table {
-	struct ir_scancode *rc_keys;
+struct rc_map_dvb_usb_table_table {
+	struct rc_map_table *rc_keys;
 	int rc_keys_size;
 };
 
@@ -948,7 +948,7 @@ static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_dw210x_table[] = {
+static struct rc_map_table rc_map_dw210x_table[] = {
 	{ 0xf80a, KEY_Q },		/*power*/
 	{ 0xf80c, KEY_M },		/*mute*/
 	{ 0xf811, KEY_1 },
@@ -982,7 +982,7 @@ static struct ir_scancode ir_codes_dw210x_table[] = {
 	{ 0xf81b, KEY_B },		/*recall*/
 };
 
-static struct ir_scancode ir_codes_tevii_table[] = {
+static struct rc_map_table rc_map_tevii_table[] = {
 	{ 0xf80a, KEY_POWER },
 	{ 0xf80c, KEY_MUTE },
 	{ 0xf811, KEY_1 },
@@ -1032,7 +1032,7 @@ static struct ir_scancode ir_codes_tevii_table[] = {
 	{ 0xf858, KEY_SWITCHVIDEOMODE },
 };
 
-static struct ir_scancode ir_codes_tbs_table[] = {
+static struct rc_map_table rc_map_tbs_table[] = {
 	{ 0xf884, KEY_POWER },
 	{ 0xf894, KEY_MUTE },
 	{ 0xf887, KEY_1 },
@@ -1067,16 +1067,16 @@ static struct ir_scancode ir_codes_tbs_table[] = {
 	{ 0xf89b, KEY_MODE }
 };
 
-static struct ir_codes_dvb_usb_table_table keys_tables[] = {
-	{ ir_codes_dw210x_table, ARRAY_SIZE(ir_codes_dw210x_table) },
-	{ ir_codes_tevii_table, ARRAY_SIZE(ir_codes_tevii_table) },
-	{ ir_codes_tbs_table, ARRAY_SIZE(ir_codes_tbs_table) },
+static struct rc_map_dvb_usb_table_table keys_tables[] = {
+	{ rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) },
+	{ rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) },
+	{ rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) },
 };
 
 static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
-	int keymap_size = d->props.rc.legacy.rc_key_map_size;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
+	int keymap_size = d->props.rc.legacy.rc_map_size;
 	u8 key[2];
 	struct i2c_msg msg = {
 		.addr = DW2102_RC_QUERY,
@@ -1185,14 +1185,14 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
 		case USB_PID_PROF_1100:
-			s6x0_properties.rc.legacy.rc_key_map = ir_codes_tbs_table;
-			s6x0_properties.rc.legacy.rc_key_map_size =
-					ARRAY_SIZE(ir_codes_tbs_table);
+			s6x0_properties.rc.legacy.rc_map_table = rc_map_tbs_table;
+			s6x0_properties.rc.legacy.rc_map_size =
+					ARRAY_SIZE(rc_map_tbs_table);
 			break;
 		case USB_PID_TEVII_S650:
-			dw2104_properties.rc.legacy.rc_key_map = ir_codes_tevii_table;
-			dw2104_properties.rc.legacy.rc_key_map_size =
-					ARRAY_SIZE(ir_codes_tevii_table);
+			dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table;
+			dw2104_properties.rc.legacy.rc_map_size =
+					ARRAY_SIZE(rc_map_tevii_table);
 		case USB_PID_DW2104:
 			reset = 1;
 			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
@@ -1257,8 +1257,8 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.i2c_algo = &dw2102_serit_i2c_algo,
 
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1310,8 +1310,8 @@ static struct dvb_usb_device_properties dw2104_properties = {
 
 	.i2c_algo = &dw2104_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1359,8 +1359,8 @@ static struct dvb_usb_device_properties dw3101_properties = {
 
 	.i2c_algo = &dw3101_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1404,8 +1404,8 @@ static struct dvb_usb_device_properties s6x0_properties = {
 
 	.i2c_algo = &s6x0_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_tevii_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_tevii_table),
+		.rc_map_table = rc_map_tevii_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_tevii_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1468,8 +1468,8 @@ static int dw2102_probe(struct usb_interface *intf,
 	/* fill only different fields */
 	p7500->firmware = "dvb-usb-p7500.fw";
 	p7500->devices[0] = d7500;
-	p7500->rc.legacy.rc_key_map = ir_codes_tbs_table;
-	p7500->rc.legacy.rc_key_map_size = ARRAY_SIZE(ir_codes_tbs_table);
+	p7500->rc.legacy.rc_map_table = rc_map_tbs_table;
+	p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
 	p7500->adapter->frontend_attach = prof_7500_frontend_attach;
 
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index bdef1a18b664..da9dc91ce910 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -142,9 +142,9 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
 		goto unlock;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
-		if (rc5_data(&d->props.rc.legacy.rc_key_map[i]) == rc_state[1]) {
-			*event = d->props.rc.legacy.rc_key_map[i].keycode;
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
+		if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) {
+			*event = d->props.rc.legacy.rc_map_table[i].keycode;
 
 			switch(rc_state[0]) {
 			case 0x80:
@@ -589,7 +589,7 @@ static struct m920x_inits pinnacle310e_init[] = {
 };
 
 /* ir keymaps */
-static struct ir_scancode ir_codes_megasky_table[] = {
+static struct rc_map_table rc_map_megasky_table[] = {
 	{ 0x0012, KEY_POWER },
 	{ 0x001e, KEY_CYCLEWINDOWS }, /* min/max */
 	{ 0x0002, KEY_CHANNELUP },
@@ -608,7 +608,7 @@ static struct ir_scancode ir_codes_megasky_table[] = {
 	{ 0x000e, KEY_COFFEE }, /* "MTS" */
 };
 
-static struct ir_scancode ir_codes_tvwalkertwin_table[] = {
+static struct rc_map_table rc_map_tvwalkertwin_table[] = {
 	{ 0x0001, KEY_ZOOM }, /* Full Screen */
 	{ 0x0002, KEY_CAMERA }, /* snapshot */
 	{ 0x0003, KEY_MUTE },
@@ -628,7 +628,7 @@ static struct ir_scancode ir_codes_tvwalkertwin_table[] = {
 	{ 0x001e, KEY_VOLUMEUP },
 };
 
-static struct ir_scancode ir_codes_pinnacle310e_table[] = {
+static struct rc_map_table rc_map_pinnacle310e_table[] = {
 	{ 0x16, KEY_POWER },
 	{ 0x17, KEY_FAVORITES },
 	{ 0x0f, KEY_TEXT },
@@ -786,8 +786,8 @@ static struct dvb_usb_device_properties megasky_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_megasky_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_megasky_table),
+		.rc_map_table     = rc_map_megasky_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_megasky_table),
 		.rc_query         = m920x_rc_query,
 	},
 
@@ -889,8 +889,8 @@ static struct dvb_usb_device_properties tvwalkertwin_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_tvwalkertwin_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_tvwalkertwin_table),
+		.rc_map_table     = rc_map_tvwalkertwin_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_tvwalkertwin_table),
 		.rc_query         = m920x_rc_query,
 	},
 
@@ -998,8 +998,8 @@ static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_pinnacle310e_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_pinnacle310e_table),
+		.rc_map_table     = rc_map_pinnacle310e_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_pinnacle310e_table),
 		.rc_query         = m920x_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index 181f36a12e2a..9d3cd2de46fc 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -21,7 +21,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define deb_ee(args...) dprintk(debug,0x02,args)
 
 /* Hauppauge NOVA-T USB2 keys */
-static struct ir_scancode ir_codes_haupp_table[] = {
+static struct rc_map_table rc_map_haupp_table[] = {
 	{ 0x1e00, KEY_0 },
 	{ 0x1e01, KEY_1 },
 	{ 0x1e02, KEY_2 },
@@ -91,14 +91,14 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
 
-			for (i = 0; i < ARRAY_SIZE(ir_codes_haupp_table); i++) {
-				if (rc5_data(&ir_codes_haupp_table[i]) == data &&
-					rc5_custom(&ir_codes_haupp_table[i]) == custom) {
+			for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
+				if (rc5_data(&rc_map_haupp_table[i]) == data &&
+					rc5_custom(&rc_map_haupp_table[i]) == custom) {
 
-					deb_rc("c: %x, d: %x\n", rc5_data(&ir_codes_haupp_table[i]),
-								 rc5_custom(&ir_codes_haupp_table[i]));
+					deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]),
+								 rc5_custom(&rc_map_haupp_table[i]));
 
-					*event = ir_codes_haupp_table[i].keycode;
+					*event = rc_map_haupp_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					if (st->old_toggle == toggle) {
 						if (st->last_repeat_count++ < 2)
@@ -197,8 +197,8 @@ static struct dvb_usb_device_properties nova_t_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_haupp_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_haupp_table),
+		.rc_map_table     = rc_map_haupp_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_haupp_table),
 		.rc_query         = nova_t_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index f896337b4535..1f1b7d6980a5 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -35,7 +35,7 @@
 struct opera1_state {
 	u32 last_key_pressed;
 };
-struct ir_codes_opera_table {
+struct rc_map_opera_table {
 	u32 keycode;
 	u32 event;
 };
@@ -331,7 +331,7 @@ static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_opera1_table[] = {
+static struct rc_map_table rc_map_opera1_table[] = {
 	{0x5fa0, KEY_1},
 	{0x51af, KEY_2},
 	{0x5da2, KEY_3},
@@ -404,12 +404,12 @@ static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
 
 		send_key = (send_key & 0xffff) | 0x0100;
 
-		for (i = 0; i < ARRAY_SIZE(ir_codes_opera1_table); i++) {
-			if (rc5_scan(&ir_codes_opera1_table[i]) == (send_key & 0xffff)) {
+		for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
+			if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = ir_codes_opera1_table[i].keycode;
+				*event = rc_map_opera1_table[i].keycode;
 				opst->last_key_pressed =
-					ir_codes_opera1_table[i].keycode;
+					rc_map_opera1_table[i].keycode;
 				break;
 			}
 			opst->last_key_pressed = 0;
@@ -497,8 +497,8 @@ static struct dvb_usb_device_properties opera1_properties = {
 	.i2c_algo = &opera1_i2c_algo,
 
 	.rc.legacy = {
-		.rc_key_map = ir_codes_opera1_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_opera1_table),
+		.rc_map_table = rc_map_opera1_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
 		.rc_interval = 200,
 		.rc_query = opera1_rc_query,
 	},
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 5c9f3275aaa0..7890e75600df 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -174,7 +174,7 @@ static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct ir_scancode ir_codes_vp702x_table[] = {
+static struct rc_map_table rc_map_vp702x_table[] = {
 	{ 0x0001, KEY_1 },
 	{ 0x0002, KEY_2 },
 };
@@ -197,10 +197,10 @@ static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return 0;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(ir_codes_vp702x_table); i++)
-		if (rc5_custom(&ir_codes_vp702x_table[i]) == key[1]) {
+	for (i = 0; i < ARRAY_SIZE(rc_map_vp702x_table); i++)
+		if (rc5_custom(&rc_map_vp702x_table[i]) == key[1]) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp702x_table[i].keycode;
+			*event = rc_map_vp702x_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -284,8 +284,8 @@ static struct dvb_usb_device_properties vp702x_properties = {
 	.read_mac_address = vp702x_read_mac_addr,
 
 	.rc.legacy = {
-		.rc_key_map       = ir_codes_vp702x_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp702x_table),
+		.rc_map_table       = rc_map_vp702x_table,
+		.rc_map_size  = ARRAY_SIZE(rc_map_vp702x_table),
 		.rc_interval      = 400,
 		.rc_query         = vp702x_rc_query,
 	},
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index f13791ca5994..ab0ab3c35e80 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -99,7 +99,7 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
 
 /* The keymapping struct. Somehow this should be loaded to the driver, but
  * currently it is hardcoded. */
-static struct ir_scancode ir_codes_vp7045_table[] = {
+static struct rc_map_table rc_map_vp7045_table[] = {
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
 	{ 0x0003, KEY_1 },
@@ -165,10 +165,10 @@ static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return 0;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(ir_codes_vp7045_table); i++)
-		if (rc5_data(&ir_codes_vp7045_table[i]) == key) {
+	for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++)
+		if (rc5_data(&rc_map_vp7045_table[i]) == key) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp7045_table[i].keycode;
+			*event = rc_map_vp7045_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -261,8 +261,8 @@ static struct dvb_usb_device_properties vp7045_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 400,
-		.rc_key_map       = ir_codes_vp7045_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp7045_table),
+		.rc_map_table       = rc_map_vp7045_table,
+		.rc_map_size  = ARRAY_SIZE(rc_map_vp7045_table),
 		.rc_query         = vp7045_rc_query,
 	},
 
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index cf5f8ca6f685..572929a2cd6f 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -34,7 +34,7 @@
 #define MODULE_NAME "mantis_core"
 #define RC_MAP_MANTIS "rc-mantis"
 
-static struct ir_scancode mantis_ir_table[] = {
+static struct rc_map_table mantis_ir_table[] = {
 	{ 0x29, KEY_POWER	},
 	{ 0x28, KEY_FAVORITES	},
 	{ 0x30, KEY_TEXT	},
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index 0ea0aeee6e78..da6556dd1cf6 100644
--- a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -14,7 +14,7 @@
 
 /* ADS Tech Instant TV DVB-T PCI Remote */
 
-static struct ir_scancode adstech_dvb_t_pci[] = {
+static struct rc_map_table adstech_dvb_t_pci[] = {
 	/* Keys 0 to 9 */
 	{ 0x4d, KEY_0 },
 	{ 0x57, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
index b0ec1c81a080..36e1eb1d8347 100644
--- a/drivers/media/rc/keymaps/rc-alink-dtu-m.c
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -21,7 +21,7 @@
 #include <media/rc-map.h>
 
 /* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
-static struct ir_scancode alink_dtu_m[] = {
+static struct rc_map_table alink_dtu_m[] = {
 	{ 0x0800, KEY_VOLUMEUP },
 	{ 0x0801, KEY_1 },
 	{ 0x0802, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
index 9bfe60e663b4..6ca91e0704b9 100644
--- a/drivers/media/rc/keymaps/rc-anysee.c
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode anysee[] = {
+static struct rc_map_table anysee[] = {
 	{ 0x0800, KEY_0 },
 	{ 0x0801, KEY_1 },
 	{ 0x0802, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
index a32840dd4df4..a40a1b6ab6b1 100644
--- a/drivers/media/rc/keymaps/rc-apac-viewcomp.c
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -14,7 +14,7 @@
 
 /* Attila Kondoros <attila.kondoros@chello.hu> */
 
-static struct ir_scancode apac_viewcomp[] = {
+static struct rc_map_table apac_viewcomp[] = {
 
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
index f86bfb7bf271..2a58ffe49bb6 100644
--- a/drivers/media/rc/keymaps/rc-asus-pc39.c
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -18,7 +18,7 @@
  * which has a label saying is "Model PC-39"
  */
 
-static struct ir_scancode asus_pc39[] = {
+static struct rc_map_table asus_pc39[] = {
 	/* Keys 0 to 9 */
 	{ 0x082a, KEY_0 },
 	{ 0x0816, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
index 0cefe1c5536d..ac0a7d981a92 100644
--- a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <devin.heitmueller@gmail.com>
  */
 
-static struct ir_scancode ati_tv_wonder_hd_600[] = {
+static struct rc_map_table ati_tv_wonder_hd_600[] = {
 	{ 0x00, KEY_RECORD},		/* Row 1 */
 	{ 0x01, KEY_PLAYPAUSE},
 	{ 0x02, KEY_STOP},
diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
index 43525c8c111a..df3360fb3dbe 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-a16d.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode avermedia_a16d[] = {
+static struct rc_map_table avermedia_a16d[] = {
 	{ 0x20, KEY_LIST},
 	{ 0x00, KEY_POWER},
 	{ 0x28, KEY_1},
diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
index 2d528cac2caf..40f2f2d418c6 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -14,7 +14,7 @@
 
 /* Oldrich Jedlicka <oldium.pro@seznam.cz> */
 
-static struct ir_scancode avermedia_cardbus[] = {
+static struct rc_map_table avermedia_cardbus[] = {
 	{ 0x00, KEY_POWER },
 	{ 0x01, KEY_TUNER },		/* TV/FM */
 	{ 0x03, KEY_TEXT },		/* Teletext */
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index e45b67ffcf3f..b4a1aa134360 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -14,7 +14,7 @@
 
 /* Matt Jesson <dvb@jesson.eclipse.co.uk */
 
-static struct ir_scancode avermedia_dvbt[] = {
+static struct rc_map_table avermedia_dvbt[] = {
 	{ 0x28, KEY_0 },		/* '0' / 'enter' */
 	{ 0x22, KEY_1 },		/* '1' */
 	{ 0x12, KEY_2 },		/* '2' / 'up arrow' */
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index d5622c507d5f..971c6f979e94 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -22,7 +22,7 @@
  * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
  */
 
-static struct ir_scancode avermedia_m135a[] = {
+static struct rc_map_table avermedia_m135a[] = {
 	/* RM-JX */
 	{ 0x0200, KEY_POWER2 },
 	{ 0x022e, KEY_DOT },		/* '.' */
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index b0e10bec82b2..74f3a20ff72a 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -16,7 +16,7 @@
  * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
  */
 
-static struct ir_scancode avermedia_m733a_rm_k6[] = {
+static struct rc_map_table avermedia_m733a_rm_k6[] = {
 	{ 0x0401, KEY_POWER2 },
 	{ 0x0406, KEY_MUTE },
 	{ 0x0408, KEY_MODE },     /* TV/FM */
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index 334846654a55..dc6a32144e47 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -23,7 +23,7 @@
 /* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
    and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
 /* FIXME: mappings are not 100% correct? */
-static struct ir_scancode avermedia_rm_ks[] = {
+static struct rc_map_table avermedia_rm_ks[] = {
 	{ 0x0501, KEY_POWER2 },
 	{ 0x0502, KEY_CHANNELUP },
 	{ 0x0503, KEY_CHANNELDOWN },
diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
index cfde54e15d5c..a5ef695e1797 100644
--- a/drivers/media/rc/keymaps/rc-avermedia.c
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -14,7 +14,7 @@
 
 /* Alex Hermann <gaaf@gmx.net> */
 
-static struct ir_scancode avermedia[] = {
+static struct rc_map_table avermedia[] = {
 	{ 0x28, KEY_1 },
 	{ 0x18, KEY_2 },
 	{ 0x38, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
index ae586632b48e..386ba5922046 100644
--- a/drivers/media/rc/keymaps/rc-avertv-303.c
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -14,7 +14,7 @@
 
 /* AVERTV STUDIO 303 Remote */
 
-static struct ir_scancode avertv_303[] = {
+static struct rc_map_table avertv_303[] = {
 	{ 0x2a, KEY_1 },
 	{ 0x32, KEY_2 },
 	{ 0x3a, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
index 579fafedd35a..fbaaba5f3893 100644
--- a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode azurewave_ad_tu700[] = {
+static struct rc_map_table azurewave_ad_tu700[] = {
 	{ 0x0000, KEY_TAB },             /* Tab */
 	{ 0x0001, KEY_2 },
 	{ 0x0002, KEY_CHANNELDOWN },
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 6abb712c9e04..33accf5b3998 100644
--- a/drivers/media/rc/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -21,7 +21,7 @@
  * helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode behold_columbus[] = {
+static struct rc_map_table behold_columbus[] = {
 
 	/*  0x13   0x11   0x1C   0x12  *
 	 *  Mute  Source  TV/FM  Power *
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index 5694185a869d..4402414bacd9 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -24,7 +24,7 @@
  * helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode behold[] = {
+static struct rc_map_table behold[] = {
 
 	/*  0x1c            0x12  *
 	 *  TV/FM          POWER  *
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index 99f73232c714..e4827a6abf31 100644
--- a/drivers/media/rc/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -18,7 +18,7 @@
  * This is a "middle of the road" approach, differences are noted
  */
 
-static struct ir_scancode budget_ci_old[] = {
+static struct rc_map_table budget_ci_old[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
index b504ddd1a922..6a69866d836c 100644
--- a/drivers/media/rc/keymaps/rc-cinergy-1400.c
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -14,7 +14,7 @@
 
 /* Cinergy 1400 DVB-T */
 
-static struct ir_scancode cinergy_1400[] = {
+static struct rc_map_table cinergy_1400[] = {
 	{ 0x01, KEY_POWER },
 	{ 0x02, KEY_1 },
 	{ 0x03, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index 8bf02f154339..ba36d14a01a0 100644
--- a/drivers/media/rc/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode cinergy[] = {
+static struct rc_map_table cinergy[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
index 47d5476d50e8..921230d84b84 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-nec.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -17,7 +17,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode dib0700_nec_table[] = {
+static struct rc_map_table dib0700_nec_table[] = {
 	/* Key codes for the Pixelview SBTVD remote */
 	{ 0x8613, KEY_MUTE },
 	{ 0x8612, KEY_POWER },
diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
index 1d09921f076f..9febb722c402 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-rc5.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -17,7 +17,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode dib0700_rc5_table[] = {
+static struct rc_map_table dib0700_rc5_table[] = {
 	/* Key codes for the tiny Pinnacle remote*/
 	{ 0x0700, KEY_MUTE },
 	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
index 8ae726b568ed..da50d7dbb9ef 100644
--- a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode digitalnow_tinytwin[] = {
+static struct rc_map_table digitalnow_tinytwin[] = {
 	{ 0x0000, KEY_MUTE },            /* [symbol speaker] */
 	{ 0x0001, KEY_VOLUMEUP },
 	{ 0x0002, KEY_POWER2 },          /* TV [power button] */
diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
index 206469fb028e..706f95dd6bdc 100644
--- a/drivers/media/rc/keymaps/rc-digittrade.c
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -25,7 +25,7 @@
    Initial keytable was from Alain Kalker <miki@dds.nl> */
 
 /* Digittrade DVB-T USB Stick */
-static struct ir_scancode digittrade[] = {
+static struct rc_map_table digittrade[] = {
 	{ 0x0000, KEY_9 },
 	{ 0x0001, KEY_EPG },             /* EPG */
 	{ 0x0002, KEY_VOLUMEDOWN },      /* Vol Dn */
diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
index ba6fb0be9d3c..9023dc9a65aa 100644
--- a/drivers/media/rc/keymaps/rc-dm1105-nec.c
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -16,7 +16,7 @@
    Igor M. Liplianin <liplianin@me.by>
  */
 
-static struct ir_scancode dm1105_nec[] = {
+static struct rc_map_table dm1105_nec[] = {
 	{ 0x0a, KEY_POWER2},		/* power */
 	{ 0x0c, KEY_MUTE},		/* mute */
 	{ 0x11, KEY_1},
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index b703937f160b..7fbeaed46516 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -14,7 +14,7 @@
 
 /* DigitalNow DNTV Live DVB-T Remote */
 
-static struct ir_scancode dntv_live_dvb_t[] = {
+static struct rc_map_table dntv_live_dvb_t[] = {
 	{ 0x00, KEY_ESC },		/* 'go up a level?' */
 	/* Keys 0 to 9 */
 	{ 0x0a, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
index b0126b2fceab..660f2e793d9a 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -14,7 +14,7 @@
 
 /* DigitalNow DNTV Live! DVB-T Pro Remote */
 
-static struct ir_scancode dntv_live_dvbt_pro[] = {
+static struct rc_map_table dntv_live_dvbt_pro[] = {
 	{ 0x16, KEY_POWER },
 	{ 0x5b, KEY_HOME },
 
diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
index 57bcd556821d..4d0ad8ca41a2 100644
--- a/drivers/media/rc/keymaps/rc-em-terratec.c
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode em_terratec[] = {
+static struct rc_map_table em_terratec[] = {
 	{ 0x01, KEY_CHANNEL },
 	{ 0x02, KEY_SELECT },
 	{ 0x03, KEY_MUTE },
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
index 97e01f4cb76a..3005d4baf211 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode encore_enltv_fm53[] = {
+static struct rc_map_table encore_enltv_fm53[] = {
 	{ 0x10, KEY_POWER2},
 	{ 0x06, KEY_MUTE},
 
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index d3030cf74839..d16db500ed31 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -15,7 +15,7 @@
 /* Encore ENLTV-FM  - black plastic, white front cover with white glowing buttons
     Juan Pablo Sormani <sorman@gmail.com> */
 
-static struct ir_scancode encore_enltv[] = {
+static struct rc_map_table encore_enltv[] = {
 
 	/* Power button does nothing, neither in Windows app,
 	 although it sends data (used for BIOS wakeup?) */
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index 1871b32efa98..a5e07c7e6eaf 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -15,7 +15,7 @@
 /* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
     Mauro Carvalho Chehab <mchehab@infradead.org> */
 
-static struct ir_scancode encore_enltv2[] = {
+static struct rc_map_table encore_enltv2[] = {
 	{ 0x4c, KEY_POWER2 },
 	{ 0x4a, KEY_TUNER },
 	{ 0x40, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
index 192d7f8287f4..e2d0590d3323 100644
--- a/drivers/media/rc/keymaps/rc-evga-indtube.c
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <devin.heitmueller@gmail.com>
  */
 
-static struct ir_scancode evga_indtube[] = {
+static struct rc_map_table evga_indtube[] = {
 	{ 0x12, KEY_POWER},
 	{ 0x02, KEY_MODE},	/* TV */
 	{ 0x14, KEY_MUTE},
diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
index fe3ab5e31a7f..ee134c58d033 100644
--- a/drivers/media/rc/keymaps/rc-eztv.c
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -15,7 +15,7 @@
 /* Alfons Geser <a.geser@cox.net>
  * updates from Job D. R. Borges <jobdrb@ig.com.br> */
 
-static struct ir_scancode eztv[] = {
+static struct rc_map_table eztv[] = {
 	{ 0x12, KEY_POWER },
 	{ 0x01, KEY_TV },	/* DVR */
 	{ 0x15, KEY_DVD },	/* DVD */
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index f48249e070f5..ef90a05a16f2 100644
--- a/drivers/media/rc/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode flydvb[] = {
+static struct rc_map_table flydvb[] = {
 	{ 0x01, KEY_ZOOM },		/* Full Screen */
 	{ 0x00, KEY_POWER },		/* Power */
 
diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
index 59713fb46820..20a133325e6e 100644
--- a/drivers/media/rc/keymaps/rc-flyvideo.c
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode flyvideo[] = {
+static struct rc_map_table flyvideo[] = {
 	{ 0x0f, KEY_0 },
 	{ 0x03, KEY_1 },
 	{ 0x04, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
index e69458d8eb1b..2687af77a806 100644
--- a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -14,7 +14,7 @@
 
 /* DViCO FUSION HDTV MCE remote */
 
-static struct ir_scancode fusionhdtv_mce[] = {
+static struct rc_map_table fusionhdtv_mce[] = {
 
 	{ 0x0b, KEY_1 },
 	{ 0x17, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
index 13587b8d6a4a..fb247baafde1 100644
--- a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -16,7 +16,7 @@
    Shine Liu <shinel@foxmail.com>
  */
 
-static struct ir_scancode gadmei_rm008z[] = {
+static struct rc_map_table gadmei_rm008z[] = {
 	{ 0x14, KEY_POWER2},		/* POWER OFF */
 	{ 0x0c, KEY_MUTE},		/* MUTE */
 
diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
index 2304bf677b3d..7e6834acc87f 100644
--- a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -17,7 +17,7 @@
  * Adrian Pardini <pardo.bsso@gmail.com>
  */
 
-static struct ir_scancode genius_tvgo_a11mce[] = {
+static struct rc_map_table genius_tvgo_a11mce[] = {
 	/* Keys 0 to 9 */
 	{ 0x48, KEY_0 },
 	{ 0x09, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
index b5be7bfbb7f0..54222caeff7c 100644
--- a/drivers/media/rc/keymaps/rc-gotview7135.c
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -14,7 +14,7 @@
 
 /* Mike Baikov <mike@baikov.com> */
 
-static struct ir_scancode gotview7135[] = {
+static struct rc_map_table gotview7135[] = {
 
 	{ 0x11, KEY_POWER },
 	{ 0x35, KEY_TV },
diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
index c60f845dd930..239625785f68 100644
--- a/drivers/media/rc/keymaps/rc-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c
@@ -16,7 +16,7 @@
  * slightly different versions), shipped with cx88+ivtv cards.
  * almost rc5 coding, but some non-standard keys */
 
-static struct ir_scancode hauppauge_new[] = {
+static struct rc_map_table hauppauge_new[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index 4ce902f87701..291e5d8850ec 100644
--- a/drivers/media/rc/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -12,7 +12,7 @@
 #include <media/rc-map.h>
 
 /* mce-mode imon mce remote key table */
-static struct ir_scancode imon_mce[] = {
+static struct rc_map_table imon_mce[] = {
 	/* keys sorted mostly by frequency of use to optimize lookups */
 	{ 0x800ff415, KEY_REWIND },
 	{ 0x800ff414, KEY_FASTFORWARD },
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index 6d4633af4393..33f28d428ef9 100644
--- a/drivers/media/rc/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -17,7 +17,7 @@
  * same remote to different hex codes, and the silkscreened names
  * vary a bit between the SoundGraph and Antec remotes... ugh.
  */
-static struct ir_scancode imon_pad[] = {
+static struct rc_map_table imon_pad[] = {
 	/* keys sorted mostly by frequency of use to optimize lookups */
 	{ 0x2a8195b7, KEY_REWIND },
 	{ 0x298315b7, KEY_REWIND },
diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
index c5208f10e7c0..5e5263f2380d 100644
--- a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -14,7 +14,7 @@
 
 /* IO-DATA BCTV7E Remote */
 
-static struct ir_scancode iodata_bctv7e[] = {
+static struct rc_map_table iodata_bctv7e[] = {
 	{ 0x40, KEY_TV },
 	{ 0x20, KEY_RADIO },		/* FM */
 	{ 0x60, KEY_EPG },
diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
index 1b6da7ffb8f1..527ab1b5fb6f 100644
--- a/drivers/media/rc/keymaps/rc-kaiomy.c
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode kaiomy[] = {
+static struct rc_map_table kaiomy[] = {
 	{ 0x43, KEY_POWER2},
 	{ 0x01, KEY_LIST},
 	{ 0x0b, KEY_ZOOM},
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index 3418e075938c..f58703e2a3ac 100644
--- a/drivers/media/rc/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -15,7 +15,7 @@
 /* Kworld 315U
  */
 
-static struct ir_scancode kworld_315u[] = {
+static struct rc_map_table kworld_315u[] = {
 	{ 0x6143, KEY_POWER },
 	{ 0x6101, KEY_TUNER },		/* source */
 	{ 0x610b, KEY_ZOOM },
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index 4d681eb7aaf4..f6235bbad507 100644
--- a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode kworld_plus_tv_analog[] = {
+static struct rc_map_table kworld_plus_tv_analog[] = {
 	{ 0x0c, KEY_PROG1 },		/* Kworld key */
 	{ 0x16, KEY_CLOSECD },		/* -> ) */
 	{ 0x1d, KEY_POWER2 },
diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
index ebdd1226bada..e1b8726daa51 100644
--- a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode leadtek_y04g0051[] = {
+static struct rc_map_table leadtek_y04g0051[] = {
 	{ 0x0300, KEY_POWER2 },
 	{ 0x0303, KEY_SCREEN },
 	{ 0x0304, KEY_RIGHT },
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 6d8a64170fd9..d4dfee72b8ca 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -11,7 +11,7 @@
 
 #include <media/rc-core.h>
 
-static struct ir_scancode lirc[] = {
+static struct rc_map_table lirc[] = {
 	{ },
 };
 
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index ca7e2acb682a..eb2d39698ef0 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -12,7 +12,7 @@
 #include <media/rc-map.h>
 
 
-static struct ir_scancode lme2510_rc[] = {
+static struct rc_map_table lme2510_rc[] = {
 	{ 0xba45, KEY_0 },
 	{ 0xa05f, KEY_1 },
 	{ 0xaf50, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
index 056cf52dce60..b24b0821da5a 100644
--- a/drivers/media/rc/keymaps/rc-manli.c
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -21,7 +21,7 @@
    helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode manli[] = {
+static struct rc_map_table manli[] = {
 
 	/*  0x1c            0x12  *
 	 * FUNCTION         POWER *
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index 3a14d31bec4d..4ad89b79a3e8 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode msi_digivox_ii[] = {
+static struct rc_map_table msi_digivox_ii[] = {
 	{ 0x0002, KEY_2 },
 	{ 0x0003, KEY_UP },              /* up */
 	{ 0x0004, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
index 16c5b0aa8c43..d3304e798356 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -24,7 +24,7 @@
 /* Uses NEC extended 0x61d6. */
 /* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
    since rc-kworld-315u.c lacks NEC extended address byte. */
-static struct ir_scancode msi_digivox_iii[] = {
+static struct rc_map_table msi_digivox_iii[] = {
 	{ 0x61d601, KEY_VIDEO },           /* Source */
 	{ 0x61d602, KEY_3 },
 	{ 0x61d603, KEY_POWER },           /* ShutDown */
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index d4c91020fc07..51999c469884 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -26,7 +26,7 @@
   Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
 */
 
-static struct ir_scancode msi_tvanywhere_plus[] = {
+static struct rc_map_table msi_tvanywhere_plus[] = {
 
 /*  ---- Remote Button Layout ----
 
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index aec064cb7b15..619df9dcbf12 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -14,7 +14,7 @@
 
 /* MSI TV@nywhere MASTER remote */
 
-static struct ir_scancode msi_tvanywhere[] = {
+static struct rc_map_table msi_tvanywhere[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index 2c44b90d48c9..8672859aaad1 100644
--- a/drivers/media/rc/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode nebula[] = {
+static struct rc_map_table nebula[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
index 929084bcaa4d..2f560dc791c0 100644
--- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@redhat.com>
  */
 
-static struct ir_scancode nec_terratec_cinergy_xs[] = {
+static struct rc_map_table nec_terratec_cinergy_xs[] = {
 	{ 0x1441, KEY_HOME},
 	{ 0x1401, KEY_POWER2},
 
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index 7fe774628edc..f4a85033b297 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -16,7 +16,7 @@
    By Peter Naulls <peter@chocky.org>
    Key comments are the functions given in the manual */
 
-static struct ir_scancode norwood[] = {
+static struct rc_map_table norwood[] = {
 	/* Keys 0 to 9 */
 	{ 0x20, KEY_0 },
 	{ 0x21, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
index a9cbcde98a30..fdfa549323cc 100644
--- a/drivers/media/rc/keymaps/rc-npgtech.c
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode npgtech[] = {
+static struct rc_map_table npgtech[] = {
 	{ 0x1d, KEY_SWITCHVIDEOMODE },	/* switch inputs */
 	{ 0x2a, KEY_FRONT },
 
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index 68b33b31f6bf..86c1101c47df 100644
--- a/drivers/media/rc/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -17,7 +17,7 @@
    Pavel Mihaylov <bin@bash.info>
    Also for the remote bundled with Kozumi KTV-01C card */
 
-static struct ir_scancode pctv_sedna[] = {
+static struct rc_map_table pctv_sedna[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
index 364ccde87a04..d3f4cd411e3b 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-color.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pinnacle_color[] = {
+static struct rc_map_table pinnacle_color[] = {
 	{ 0x59, KEY_MUTE },
 	{ 0x4a, KEY_POWER },
 
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
index 993eff72f233..1f48b43e4939 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-grey.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pinnacle_grey[] = {
+static struct rc_map_table pinnacle_grey[] = {
 	{ 0x3a, KEY_0 },
 	{ 0x31, KEY_1 },
 	{ 0x32, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index 56e6a7e203ec..dc7267c2d04a 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -14,7 +14,7 @@
 
 /* Pinnacle PCTV HD 800i mini remote */
 
-static struct ir_scancode pinnacle_pctv_hd[] = {
+static struct rc_map_table pinnacle_pctv_hd[] = {
 
 	{ 0x0f, KEY_1 },
 	{ 0x15, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 84f89ebd8998..93f72487a7bb 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -16,7 +16,7 @@
  * Keytable for MK-F12 IR remote provided together with Pixelview
  * Ultra Pro Remote Controller. Uses NEC extended format.
  */
-static struct ir_scancode pixelview_mk12[] = {
+static struct rc_map_table pixelview_mk12[] = {
 	{ 0x866b03, KEY_TUNER },	/* Timeshift */
 	{ 0x866b1e, KEY_POWER2 },	/* power */
 
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index 703f86bca132..e6d60d2cf271 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -17,7 +17,7 @@
    present on PV MPEG 8000GT
  */
 
-static struct ir_scancode pixelview_new[] = {
+static struct rc_map_table pixelview_new[] = {
 	{ 0x3c, KEY_TIME },		/* Timeshift */
 	{ 0x12, KEY_POWER },
 
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 5a50aa7e411d..2a767102a164 100644
--- a/drivers/media/rc/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pixelview[] = {
+static struct rc_map_table pixelview[] = {
 
 	{ 0x1e, KEY_POWER },	/* power */
 	{ 0x07, KEY_MEDIA },	/* source */
diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
index 4eec4371f7d1..7cc0d57df3be 100644
--- a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -17,7 +17,7 @@
  * Daniel Fraga <fragabr@gmail.com>
  */
 
-static struct ir_scancode powercolor_real_angel[] = {
+static struct rc_map_table powercolor_real_angel[] = {
 	{ 0x38, KEY_SWITCHVIDEOMODE },	/* switch inputs */
 	{ 0x0c, KEY_MEDIA },		/* Turn ON/OFF App */
 	{ 0x00, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
index 802c58a0ae26..d5e62a50c1df 100644
--- a/drivers/media/rc/keymaps/rc-proteus-2309.c
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -14,7 +14,7 @@
 
 /* Michal Majchrowicz <mmajchrowicz@gmail.com> */
 
-static struct ir_scancode proteus_2309[] = {
+static struct rc_map_table proteus_2309[] = {
 	/* numeric */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
index f3e9709b7c1f..5dbfd913b211 100644
--- a/drivers/media/rc/keymaps/rc-purpletv.c
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode purpletv[] = {
+static struct rc_map_table purpletv[] = {
 	{ 0x03, KEY_POWER },
 	{ 0x6f, KEY_MUTE },
 	{ 0x10, KEY_BACKSPACE },	/* Recall */
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index e301ff033af1..d9c7e2f26add 100644
--- a/drivers/media/rc/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -14,7 +14,7 @@
 
 /* Mark Phalan <phalanm@o2.ie> */
 
-static struct ir_scancode pv951[] = {
+static struct rc_map_table pv951[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
index 91bcab8bd266..eef2e8714542 100644
--- a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -19,7 +19,7 @@
  * This table contains the complete RC5 code, instead of just the data part
  */
 
-static struct ir_scancode rc5_hauppauge_new[] = {
+static struct rc_map_table rc5_hauppauge_new[] = {
 	/* Keys 0 to 9 */
 	{ 0x1e00, KEY_0 },
 	{ 0x1e01, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
index cda2a2fae04d..efa14882e762 100644
--- a/drivers/media/rc/keymaps/rc-rc5-tv.c
+++ b/drivers/media/rc/keymaps/rc-rc5-tv.c
@@ -16,7 +16,7 @@
 /* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
 /* used by old (black) Hauppauge remotes                         */
 
-static struct ir_scancode rc5_tv[] = {
+static struct rc_map_table rc5_tv[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index f926477a0562..81f41723fde3 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -11,7 +11,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode rc6_mce[] = {
+static struct rc_map_table rc6_mce[] = {
 
 	{ 0x800f0400, KEY_NUMERIC_0 },
 	{ 0x800f0401, KEY_NUMERIC_1 },
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index 678142659183..884416ca0ebe 100644
--- a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -14,7 +14,7 @@
 
 /* Zogis Real Audio 220 - 32 keys IR */
 
-static struct ir_scancode real_audio_220_32_keys[] = {
+static struct rc_map_table real_audio_220_32_keys[] = {
 	{ 0x1c, KEY_RADIO},
 	{ 0x12, KEY_POWER2},
 
diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
index bafe5b8f4192..5a86a7151488 100644
--- a/drivers/media/rc/keymaps/rc-streamzap.c
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -11,7 +11,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode streamzap[] = {
+static struct rc_map_table streamzap[] = {
 /*
  * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
  * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
index 4ef4f811d011..6e2f5b5b7740 100644
--- a/drivers/media/rc/keymaps/rc-tbs-nec.c
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode tbs_nec[] = {
+static struct rc_map_table tbs_nec[] = {
 	{ 0x04, KEY_POWER2},	/*power*/
 	{ 0x14, KEY_MUTE},	/*mute*/
 	{ 0x07, KEY_1},
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
index 4064a32569e2..540020a7821b 100644
--- a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <dheitmueller@linuxtv.org>
  */
 
-static struct ir_scancode terratec_cinergy_xs[] = {
+static struct rc_map_table terratec_cinergy_xs[] = {
 	{ 0x41, KEY_HOME},
 	{ 0x01, KEY_POWER},
 	{ 0x42, KEY_MENU},
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
index c23caf70036b..a1513f0299d2 100644
--- a/drivers/media/rc/keymaps/rc-terratec-slim.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -22,7 +22,7 @@
 
 /* TerraTec slim remote, 7 rows, 4 columns. */
 /* Uses NEC extended 0x02bd. */
-static struct ir_scancode terratec_slim[] = {
+static struct rc_map_table terratec_slim[] = {
 	{ 0x02bd00, KEY_1 },
 	{ 0x02bd01, KEY_2 },
 	{ 0x02bd02, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
index eabfb70973b5..6b2fc431689e 100644
--- a/drivers/media/rc/keymaps/rc-tevii-nec.c
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode tevii_nec[] = {
+static struct rc_map_table tevii_nec[] = {
 	{ 0x0a, KEY_POWER2},
 	{ 0x0c, KEY_MUTE},
 	{ 0x11, KEY_1},
diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
index cd39b3dbab06..61a4234f13af 100644
--- a/drivers/media/rc/keymaps/rc-total-media-in-hand.c
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -21,7 +21,7 @@
 #include <media/rc-map.h>
 
 /* Uses NEC extended 0x02bd */
-static struct ir_scancode total_media_in_hand[] = {
+static struct rc_map_table total_media_in_hand[] = {
 	{ 0x02bd00, KEY_1 },
 	{ 0x02bd01, KEY_2 },
 	{ 0x02bd02, KEY_3 },
diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
index 31d6c6c23642..2d7bbf8ae83e 100644
--- a/drivers/media/rc/keymaps/rc-trekstor.c
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -23,7 +23,7 @@
 /* TrekStor DVB-T USB Stick remote controller. */
 /* Imported from af9015.h.
    Initial keytable was from Marc Schneider <macke@macke.org> */
-static struct ir_scancode trekstor[] = {
+static struct rc_map_table trekstor[] = {
 	{ 0x0084, KEY_0 },
 	{ 0x0085, KEY_MUTE },            /* Mute */
 	{ 0x0086, KEY_HOMEPAGE },        /* Home */
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
index 45a060850e53..f3fe9f39d069 100644
--- a/drivers/media/rc/keymaps/rc-tt-1500.c
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -14,7 +14,7 @@
 
 /* for the Technotrend 1500 bundled remotes (grey and black): */
 
-static struct ir_scancode tt_1500[] = {
+static struct rc_map_table tt_1500[] = {
 	{ 0x01, KEY_POWER },
 	{ 0x02, KEY_SHUFFLE },		/* ? double-arrow key */
 	{ 0x03, KEY_1 },
diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
index b5def5387ded..67cc6e0b326b 100644
--- a/drivers/media/rc/keymaps/rc-twinhan1027.c
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -1,6 +1,6 @@
 #include <media/rc-map.h>
 
-static struct ir_scancode twinhan_vp1027[] = {
+static struct rc_map_table twinhan_vp1027[] = {
 	{ 0x16, KEY_POWER2 },
 	{ 0x17, KEY_FAVORITES },
 	{ 0x0f, KEY_TEXT },
diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
index 7c422b4670fa..f8a0d107001e 100644
--- a/drivers/media/rc/keymaps/rc-videomate-s350.c
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode videomate_s350[] = {
+static struct rc_map_table videomate_s350[] = {
 	{ 0x00, KEY_TV},
 	{ 0x01, KEY_DVD},
 	{ 0x04, KEY_RECORD},
diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
index 4d31b47dfc30..04d102457ea6 100644
--- a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode videomate_tv_pvr[] = {
+static struct rc_map_table videomate_tv_pvr[] = {
 	{ 0x14, KEY_MUTE },
 	{ 0x24, KEY_ZOOM },
 
diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
index ade3c14c4c0f..78fc7da4b9e2 100644
--- a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -16,7 +16,7 @@
    Magnus Alm <magnus.alm@gmail.com>
  */
 
-static struct ir_scancode winfast_usbii_deluxe[] = {
+static struct rc_map_table winfast_usbii_deluxe[] = {
 	{ 0x62, KEY_0},
 	{ 0x75, KEY_1},
 	{ 0x76, KEY_2},
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index 502b5f54f84e..a8fbd7662d39 100644
--- a/drivers/media/rc/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -14,7 +14,7 @@
 
 /* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
 
-static struct ir_scancode winfast[] = {
+static struct rc_map_table winfast[] = {
 	/* Keys 0 to 9 */
 	{ 0x12, KEY_0 },
 	{ 0x05, KEY_1 },
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index caa8d70de726..b989f5d98d5f 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -94,7 +94,7 @@ void ir_unregister_map(struct rc_keymap *map)
 EXPORT_SYMBOL_GPL(ir_unregister_map);
 
 
-static struct ir_scancode empty[] = {
+static struct rc_map_table empty[] = {
 	{ 0x2a, KEY_COFFEE },
 };
 
@@ -123,8 +123,8 @@ static int ir_create_table(struct rc_map *rc_map,
 {
 	rc_map->name = name;
 	rc_map->rc_type = rc_type;
-	rc_map->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
-	rc_map->size = rc_map->alloc / sizeof(struct ir_scancode);
+	rc_map->alloc = roundup_pow_of_two(size * sizeof(struct rc_map_table));
+	rc_map->size = rc_map->alloc / sizeof(struct rc_map_table);
 	rc_map->scan = kmalloc(rc_map->alloc, GFP_KERNEL);
 	if (!rc_map->scan)
 		return -ENOMEM;
@@ -161,8 +161,8 @@ static int ir_resize_table(struct rc_map *rc_map, gfp_t gfp_flags)
 {
 	unsigned int oldalloc = rc_map->alloc;
 	unsigned int newalloc = oldalloc;
-	struct ir_scancode *oldscan = rc_map->scan;
-	struct ir_scancode *newscan;
+	struct rc_map_table *oldscan = rc_map->scan;
+	struct rc_map_table *newscan;
 
 	if (rc_map->size == rc_map->len) {
 		/* All entries in use -> grow keytable */
@@ -188,10 +188,10 @@ static int ir_resize_table(struct rc_map *rc_map, gfp_t gfp_flags)
 		return -ENOMEM;
 	}
 
-	memcpy(newscan, rc_map->scan, rc_map->len * sizeof(struct ir_scancode));
+	memcpy(newscan, rc_map->scan, rc_map->len * sizeof(struct rc_map_table));
 	rc_map->scan = newscan;
 	rc_map->alloc = newalloc;
-	rc_map->size = rc_map->alloc / sizeof(struct ir_scancode);
+	rc_map->size = rc_map->alloc / sizeof(struct rc_map_table);
 	kfree(oldscan);
 	return 0;
 }
@@ -221,7 +221,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
 			   index, rc_map->scan[index].scancode);
 		rc_map->len--;
 		memmove(&rc_map->scan[index], &rc_map->scan[index+ 1],
-			(rc_map->len - index) * sizeof(struct ir_scancode));
+			(rc_map->len - index) * sizeof(struct rc_map_table));
 	} else {
 		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
 			   index,
@@ -300,7 +300,7 @@ static unsigned int ir_establish_scancode(struct rc_dev *dev,
 	/* i is the proper index to insert our new keycode */
 	if (i < rc_map->len)
 		memmove(&rc_map->scan[i + 1], &rc_map->scan[i],
-			(rc_map->len - i) * sizeof(struct ir_scancode));
+			(rc_map->len - i) * sizeof(struct rc_map_table));
 	rc_map->scan[i].scancode = scancode;
 	rc_map->scan[i].keycode = KEY_RESERVED;
 	rc_map->len++;
@@ -440,7 +440,7 @@ static int ir_getkeycode(struct input_dev *idev,
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
 	struct rc_map *rc_map = &rdev->rc_map;
-	struct ir_scancode *entry;
+	struct rc_map_table *entry;
 	unsigned long flags;
 	unsigned int index;
 	unsigned int scancode;
-- 
cgit v1.2.3


From d100e659b61a735c3343b3d82c1c009b04072cdd Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 15:56:53 -0300
Subject: [media] rc: use rc_map_ prefix for all rc map tables

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/mantis/mantis_input.c            |  8 +++----
 drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c    |  6 ++---
 drivers/media/rc/keymaps/rc-alink-dtu-m.c          |  6 ++---
 drivers/media/rc/keymaps/rc-anysee.c               |  6 ++---
 drivers/media/rc/keymaps/rc-apac-viewcomp.c        |  6 ++---
 drivers/media/rc/keymaps/rc-asus-pc39.c            |  6 ++---
 drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia-a16d.c       |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia-cardbus.c    |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia-dvbt.c       |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia-m135a.c      |  6 ++---
 .../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c    |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia-rm-ks.c      |  6 ++---
 drivers/media/rc/keymaps/rc-avermedia.c            |  6 ++---
 drivers/media/rc/keymaps/rc-avertv-303.c           |  6 ++---
 drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c   |  6 ++---
 drivers/media/rc/keymaps/rc-behold-columbus.c      |  6 ++---
 drivers/media/rc/keymaps/rc-behold.c               |  6 ++---
 drivers/media/rc/keymaps/rc-budget-ci-old.c        |  6 ++---
 drivers/media/rc/keymaps/rc-cinergy-1400.c         |  6 ++---
 drivers/media/rc/keymaps/rc-cinergy.c              |  6 ++---
 drivers/media/rc/keymaps/rc-dib0700-nec.c          |  6 ++---
 drivers/media/rc/keymaps/rc-dib0700-rc5.c          |  6 ++---
 drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c  |  6 ++---
 drivers/media/rc/keymaps/rc-digittrade.c           |  6 ++---
 drivers/media/rc/keymaps/rc-dm1105-nec.c           |  6 ++---
 drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c      |  6 ++---
 drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c   |  6 ++---
 drivers/media/rc/keymaps/rc-em-terratec.c          |  6 ++---
 drivers/media/rc/keymaps/rc-encore-enltv-fm53.c    |  6 ++---
 drivers/media/rc/keymaps/rc-encore-enltv.c         |  6 ++---
 drivers/media/rc/keymaps/rc-encore-enltv2.c        |  6 ++---
 drivers/media/rc/keymaps/rc-evga-indtube.c         |  6 ++---
 drivers/media/rc/keymaps/rc-eztv.c                 |  6 ++---
 drivers/media/rc/keymaps/rc-flydvb.c               |  6 ++---
 drivers/media/rc/keymaps/rc-flyvideo.c             |  6 ++---
 drivers/media/rc/keymaps/rc-fusionhdtv-mce.c       |  6 ++---
 drivers/media/rc/keymaps/rc-gadmei-rm008z.c        |  6 ++---
 drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c   |  6 ++---
 drivers/media/rc/keymaps/rc-gotview7135.c          |  6 ++---
 drivers/media/rc/keymaps/rc-hauppauge-new.c        |  6 ++---
 drivers/media/rc/keymaps/rc-imon-mce.c             |  6 ++---
 drivers/media/rc/keymaps/rc-imon-pad.c             |  6 ++---
 drivers/media/rc/keymaps/rc-iodata-bctv7e.c        |  6 ++---
 drivers/media/rc/keymaps/rc-kaiomy.c               |  6 ++---
 drivers/media/rc/keymaps/rc-kworld-315u.c          |  6 ++---
 .../media/rc/keymaps/rc-kworld-plus-tv-analog.c    |  6 ++---
 drivers/media/rc/keymaps/rc-leadtek-y04g0051.c     |  6 ++---
 drivers/media/rc/keymaps/rc-lirc.c                 |  6 ++---
 drivers/media/rc/keymaps/rc-lme2510.c              |  6 ++---
 drivers/media/rc/keymaps/rc-manli.c                |  6 ++---
 drivers/media/rc/keymaps/rc-msi-digivox-ii.c       |  6 ++---
 drivers/media/rc/keymaps/rc-msi-digivox-iii.c      |  6 ++---
 drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c  |  6 ++---
 drivers/media/rc/keymaps/rc-msi-tvanywhere.c       |  6 ++---
 drivers/media/rc/keymaps/rc-nebula.c               |  6 ++---
 .../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c  |  6 ++---
 drivers/media/rc/keymaps/rc-norwood.c              |  6 ++---
 drivers/media/rc/keymaps/rc-npgtech.c              |  6 ++---
 drivers/media/rc/keymaps/rc-pctv-sedna.c           |  6 ++---
 drivers/media/rc/keymaps/rc-pinnacle-color.c       |  6 ++---
 drivers/media/rc/keymaps/rc-pinnacle-grey.c        |  6 ++---
 drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c     |  6 ++---
 drivers/media/rc/keymaps/rc-pixelview-mk12.c       |  6 ++---
 drivers/media/rc/keymaps/rc-pixelview-new.c        |  6 ++---
 drivers/media/rc/keymaps/rc-pixelview.c            |  6 ++---
 .../media/rc/keymaps/rc-powercolor-real-angel.c    |  6 ++---
 drivers/media/rc/keymaps/rc-proteus-2309.c         |  6 ++---
 drivers/media/rc/keymaps/rc-purpletv.c             |  6 ++---
 drivers/media/rc/keymaps/rc-pv951.c                |  6 ++---
 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c    |  6 ++---
 drivers/media/rc/keymaps/rc-rc5-tv.c               |  6 ++---
 drivers/media/rc/keymaps/rc-rc6-mce.c              |  6 ++---
 .../media/rc/keymaps/rc-real-audio-220-32-keys.c   |  6 ++---
 drivers/media/rc/keymaps/rc-streamzap.c            |  6 ++---
 drivers/media/rc/keymaps/rc-tbs-nec.c              |  6 ++---
 drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c  |  6 ++---
 drivers/media/rc/keymaps/rc-terratec-slim.c        |  6 ++---
 drivers/media/rc/keymaps/rc-tevii-nec.c            |  6 ++---
 drivers/media/rc/keymaps/rc-total-media-in-hand.c  |  6 ++---
 drivers/media/rc/keymaps/rc-trekstor.c             |  6 ++---
 drivers/media/rc/keymaps/rc-tt-1500.c              |  6 ++---
 drivers/media/rc/keymaps/rc-twinhan1027.c          |  6 ++---
 drivers/media/rc/keymaps/rc-videomate-s350.c       |  6 ++---
 drivers/media/rc/keymaps/rc-videomate-tv-pvr.c     |  6 ++---
 drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c |  6 ++---
 drivers/media/rc/keymaps/rc-winfast.c              |  6 ++---
 drivers/media/rc/rc-main.c                         | 28 +++++++++++-----------
 88 files changed, 276 insertions(+), 276 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index 572929a2cd6f..db6d54d3fec0 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -95,7 +95,7 @@ static struct rc_map_table mantis_ir_table[] = {
 	{ 0x00, KEY_BLUE	},
 };
 
-static struct rc_keymap ir_mantis_map = {
+static struct rc_map_list ir_mantis_map = {
 	.map = {
 		.scan = mantis_ir_table,
 		.size = ARRAY_SIZE(mantis_ir_table),
@@ -109,7 +109,7 @@ int mantis_input_init(struct mantis_pci *mantis)
 	struct rc_dev *dev;
 	int err;
 
-	err = ir_register_map(&ir_mantis_map);
+	err = rc_map_register(&ir_mantis_map);
 	if (err)
 		goto out;
 
@@ -145,7 +145,7 @@ int mantis_input_init(struct mantis_pci *mantis)
 out_dev:
 	rc_free_device(dev);
 out_map:
-	ir_unregister_map(&ir_mantis_map);
+	rc_map_unregister(&ir_mantis_map);
 out:
 	return err;
 }
@@ -153,7 +153,7 @@ out:
 int mantis_exit(struct mantis_pci *mantis)
 {
 	rc_unregister_device(mantis->rc);
-	ir_unregister_map(&ir_mantis_map);
+	rc_map_unregister(&ir_mantis_map);
 	return 0;
 }
 
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index da6556dd1cf6..136d3952dedc 100644
--- a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -63,7 +63,7 @@ static struct rc_map_table adstech_dvb_t_pci[] = {
 	{ 0x1c, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap adstech_dvb_t_pci_map = {
+static struct rc_map_list adstech_dvb_t_pci_map = {
 	.map = {
 		.scan    = adstech_dvb_t_pci,
 		.size    = ARRAY_SIZE(adstech_dvb_t_pci),
@@ -74,12 +74,12 @@ static struct rc_keymap adstech_dvb_t_pci_map = {
 
 static int __init init_rc_map_adstech_dvb_t_pci(void)
 {
-	return ir_register_map(&adstech_dvb_t_pci_map);
+	return rc_map_register(&adstech_dvb_t_pci_map);
 }
 
 static void __exit exit_rc_map_adstech_dvb_t_pci(void)
 {
-	ir_unregister_map(&adstech_dvb_t_pci_map);
+	rc_map_unregister(&adstech_dvb_t_pci_map);
 }
 
 module_init(init_rc_map_adstech_dvb_t_pci)
diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
index 36e1eb1d8347..fe652e928dc0 100644
--- a/drivers/media/rc/keymaps/rc-alink-dtu-m.c
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -42,7 +42,7 @@ static struct rc_map_table alink_dtu_m[] = {
 	{ 0x081d, KEY_CHANNELDOWN },
 };
 
-static struct rc_keymap alink_dtu_m_map = {
+static struct rc_map_list alink_dtu_m_map = {
 	.map = {
 		.scan    = alink_dtu_m,
 		.size    = ARRAY_SIZE(alink_dtu_m),
@@ -53,12 +53,12 @@ static struct rc_keymap alink_dtu_m_map = {
 
 static int __init init_rc_map_alink_dtu_m(void)
 {
-	return ir_register_map(&alink_dtu_m_map);
+	return rc_map_register(&alink_dtu_m_map);
 }
 
 static void __exit exit_rc_map_alink_dtu_m(void)
 {
-	ir_unregister_map(&alink_dtu_m_map);
+	rc_map_unregister(&alink_dtu_m_map);
 }
 
 module_init(init_rc_map_alink_dtu_m)
diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
index 6ca91e0704b9..884f1b51a8ee 100644
--- a/drivers/media/rc/keymaps/rc-anysee.c
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -67,7 +67,7 @@ static struct rc_map_table anysee[] = {
 	{ 0x0851, KEY_PAUSE },
 };
 
-static struct rc_keymap anysee_map = {
+static struct rc_map_list anysee_map = {
 	.map = {
 		.scan    = anysee,
 		.size    = ARRAY_SIZE(anysee),
@@ -78,12 +78,12 @@ static struct rc_keymap anysee_map = {
 
 static int __init init_rc_map_anysee(void)
 {
-	return ir_register_map(&anysee_map);
+	return rc_map_register(&anysee_map);
 }
 
 static void __exit exit_rc_map_anysee(void)
 {
-	ir_unregister_map(&anysee_map);
+	rc_map_unregister(&anysee_map);
 }
 
 module_init(init_rc_map_anysee)
diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
index a40a1b6ab6b1..7af188209ff9 100644
--- a/drivers/media/rc/keymaps/rc-apac-viewcomp.c
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -54,7 +54,7 @@ static struct rc_map_table apac_viewcomp[] = {
 	{ 0x18, KEY_KPMINUS },		/* fine tune <<<< */
 };
 
-static struct rc_keymap apac_viewcomp_map = {
+static struct rc_map_list apac_viewcomp_map = {
 	.map = {
 		.scan    = apac_viewcomp,
 		.size    = ARRAY_SIZE(apac_viewcomp),
@@ -65,12 +65,12 @@ static struct rc_keymap apac_viewcomp_map = {
 
 static int __init init_rc_map_apac_viewcomp(void)
 {
-	return ir_register_map(&apac_viewcomp_map);
+	return rc_map_register(&apac_viewcomp_map);
 }
 
 static void __exit exit_rc_map_apac_viewcomp(void)
 {
-	ir_unregister_map(&apac_viewcomp_map);
+	rc_map_unregister(&apac_viewcomp_map);
 }
 
 module_init(init_rc_map_apac_viewcomp)
diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
index 2a58ffe49bb6..b2481154491b 100644
--- a/drivers/media/rc/keymaps/rc-asus-pc39.c
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -65,7 +65,7 @@ static struct rc_map_table asus_pc39[] = {
 	{ 0x083e, KEY_DVD },		/* dvd */
 };
 
-static struct rc_keymap asus_pc39_map = {
+static struct rc_map_list asus_pc39_map = {
 	.map = {
 		.scan    = asus_pc39,
 		.size    = ARRAY_SIZE(asus_pc39),
@@ -76,12 +76,12 @@ static struct rc_keymap asus_pc39_map = {
 
 static int __init init_rc_map_asus_pc39(void)
 {
-	return ir_register_map(&asus_pc39_map);
+	return rc_map_register(&asus_pc39_map);
 }
 
 static void __exit exit_rc_map_asus_pc39(void)
 {
-	ir_unregister_map(&asus_pc39_map);
+	rc_map_unregister(&asus_pc39_map);
 }
 
 module_init(init_rc_map_asus_pc39)
diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
index ac0a7d981a92..f766b24b0158 100644
--- a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -43,7 +43,7 @@ static struct rc_map_table ati_tv_wonder_hd_600[] = {
 	{ 0x17, KEY_VOLUMEDOWN},
 };
 
-static struct rc_keymap ati_tv_wonder_hd_600_map = {
+static struct rc_map_list ati_tv_wonder_hd_600_map = {
 	.map = {
 		.scan    = ati_tv_wonder_hd_600,
 		.size    = ARRAY_SIZE(ati_tv_wonder_hd_600),
@@ -54,12 +54,12 @@ static struct rc_keymap ati_tv_wonder_hd_600_map = {
 
 static int __init init_rc_map_ati_tv_wonder_hd_600(void)
 {
-	return ir_register_map(&ati_tv_wonder_hd_600_map);
+	return rc_map_register(&ati_tv_wonder_hd_600_map);
 }
 
 static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
 {
-	ir_unregister_map(&ati_tv_wonder_hd_600_map);
+	rc_map_unregister(&ati_tv_wonder_hd_600_map);
 }
 
 module_init(init_rc_map_ati_tv_wonder_hd_600)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
index df3360fb3dbe..ec9beeebd410 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-a16d.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -49,7 +49,7 @@ static struct rc_map_table avermedia_a16d[] = {
 	{ 0x2a, KEY_MENU},
 };
 
-static struct rc_keymap avermedia_a16d_map = {
+static struct rc_map_list avermedia_a16d_map = {
 	.map = {
 		.scan    = avermedia_a16d,
 		.size    = ARRAY_SIZE(avermedia_a16d),
@@ -60,12 +60,12 @@ static struct rc_keymap avermedia_a16d_map = {
 
 static int __init init_rc_map_avermedia_a16d(void)
 {
-	return ir_register_map(&avermedia_a16d_map);
+	return rc_map_register(&avermedia_a16d_map);
 }
 
 static void __exit exit_rc_map_avermedia_a16d(void)
 {
-	ir_unregister_map(&avermedia_a16d_map);
+	rc_map_unregister(&avermedia_a16d_map);
 }
 
 module_init(init_rc_map_avermedia_a16d)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
index 40f2f2d418c6..bdf97b74cf90 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -71,7 +71,7 @@ static struct rc_map_table avermedia_cardbus[] = {
 	{ 0x43, KEY_CHANNELUP },	/* Channel up */
 };
 
-static struct rc_keymap avermedia_cardbus_map = {
+static struct rc_map_list avermedia_cardbus_map = {
 	.map = {
 		.scan    = avermedia_cardbus,
 		.size    = ARRAY_SIZE(avermedia_cardbus),
@@ -82,12 +82,12 @@ static struct rc_keymap avermedia_cardbus_map = {
 
 static int __init init_rc_map_avermedia_cardbus(void)
 {
-	return ir_register_map(&avermedia_cardbus_map);
+	return rc_map_register(&avermedia_cardbus_map);
 }
 
 static void __exit exit_rc_map_avermedia_cardbus(void)
 {
-	ir_unregister_map(&avermedia_cardbus_map);
+	rc_map_unregister(&avermedia_cardbus_map);
 }
 
 module_init(init_rc_map_avermedia_cardbus)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index b4a1aa134360..3ddb41bc075e 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -52,7 +52,7 @@ static struct rc_map_table avermedia_dvbt[] = {
 	{ 0x3e, KEY_VOLUMEUP },		/* 'volume +' */
 };
 
-static struct rc_keymap avermedia_dvbt_map = {
+static struct rc_map_list avermedia_dvbt_map = {
 	.map = {
 		.scan    = avermedia_dvbt,
 		.size    = ARRAY_SIZE(avermedia_dvbt),
@@ -63,12 +63,12 @@ static struct rc_keymap avermedia_dvbt_map = {
 
 static int __init init_rc_map_avermedia_dvbt(void)
 {
-	return ir_register_map(&avermedia_dvbt_map);
+	return rc_map_register(&avermedia_dvbt_map);
 }
 
 static void __exit exit_rc_map_avermedia_dvbt(void)
 {
-	ir_unregister_map(&avermedia_dvbt_map);
+	rc_map_unregister(&avermedia_dvbt_map);
 }
 
 module_init(init_rc_map_avermedia_dvbt)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index 971c6f979e94..357fea58a46e 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -121,7 +121,7 @@ static struct rc_map_table avermedia_m135a[] = {
 	{ 0x041e, KEY_NEXT },
 };
 
-static struct rc_keymap avermedia_m135a_map = {
+static struct rc_map_list avermedia_m135a_map = {
 	.map = {
 		.scan    = avermedia_m135a,
 		.size    = ARRAY_SIZE(avermedia_m135a),
@@ -132,12 +132,12 @@ static struct rc_keymap avermedia_m135a_map = {
 
 static int __init init_rc_map_avermedia_m135a(void)
 {
-	return ir_register_map(&avermedia_m135a_map);
+	return rc_map_register(&avermedia_m135a_map);
 }
 
 static void __exit exit_rc_map_avermedia_m135a(void)
 {
-	ir_unregister_map(&avermedia_m135a_map);
+	rc_map_unregister(&avermedia_m135a_map);
 }
 
 module_init(init_rc_map_avermedia_m135a)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index 74f3a20ff72a..e694e6eac37e 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -69,7 +69,7 @@ static struct rc_map_table avermedia_m733a_rm_k6[] = {
 	{ 0x041e, KEY_NEXT },
 };
 
-static struct rc_keymap avermedia_m733a_rm_k6_map = {
+static struct rc_map_list avermedia_m733a_rm_k6_map = {
 	.map = {
 		.scan    = avermedia_m733a_rm_k6,
 		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
@@ -80,12 +80,12 @@ static struct rc_keymap avermedia_m733a_rm_k6_map = {
 
 static int __init init_rc_map_avermedia_m733a_rm_k6(void)
 {
-	return ir_register_map(&avermedia_m733a_rm_k6_map);
+	return rc_map_register(&avermedia_m733a_rm_k6_map);
 }
 
 static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
 {
-	ir_unregister_map(&avermedia_m733a_rm_k6_map);
+	rc_map_unregister(&avermedia_m733a_rm_k6_map);
 }
 
 module_init(init_rc_map_avermedia_m733a_rm_k6)
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index dc6a32144e47..f4ca1fff455d 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -53,7 +53,7 @@ static struct rc_map_table avermedia_rm_ks[] = {
 	{ 0x0556, KEY_ZOOM },
 };
 
-static struct rc_keymap avermedia_rm_ks_map = {
+static struct rc_map_list avermedia_rm_ks_map = {
 	.map = {
 		.scan    = avermedia_rm_ks,
 		.size    = ARRAY_SIZE(avermedia_rm_ks),
@@ -64,12 +64,12 @@ static struct rc_keymap avermedia_rm_ks_map = {
 
 static int __init init_rc_map_avermedia_rm_ks(void)
 {
-	return ir_register_map(&avermedia_rm_ks_map);
+	return rc_map_register(&avermedia_rm_ks_map);
 }
 
 static void __exit exit_rc_map_avermedia_rm_ks(void)
 {
-	ir_unregister_map(&avermedia_rm_ks_map);
+	rc_map_unregister(&avermedia_rm_ks_map);
 }
 
 module_init(init_rc_map_avermedia_rm_ks)
diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
index a5ef695e1797..edfa71506d3e 100644
--- a/drivers/media/rc/keymaps/rc-avermedia.c
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -60,7 +60,7 @@ static struct rc_map_table avermedia[] = {
 	{ 0x31, KEY_CHANNELUP }		/* CHANNEL/PAGE+ */
 };
 
-static struct rc_keymap avermedia_map = {
+static struct rc_map_list avermedia_map = {
 	.map = {
 		.scan    = avermedia,
 		.size    = ARRAY_SIZE(avermedia),
@@ -71,12 +71,12 @@ static struct rc_keymap avermedia_map = {
 
 static int __init init_rc_map_avermedia(void)
 {
-	return ir_register_map(&avermedia_map);
+	return rc_map_register(&avermedia_map);
 }
 
 static void __exit exit_rc_map_avermedia(void)
 {
-	ir_unregister_map(&avermedia_map);
+	rc_map_unregister(&avermedia_map);
 }
 
 module_init(init_rc_map_avermedia)
diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
index 386ba5922046..32e94988dc94 100644
--- a/drivers/media/rc/keymaps/rc-avertv-303.c
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -59,7 +59,7 @@ static struct rc_map_table avertv_303[] = {
 	{ 0x1b, KEY_UP },
 };
 
-static struct rc_keymap avertv_303_map = {
+static struct rc_map_list avertv_303_map = {
 	.map = {
 		.scan    = avertv_303,
 		.size    = ARRAY_SIZE(avertv_303),
@@ -70,12 +70,12 @@ static struct rc_keymap avertv_303_map = {
 
 static int __init init_rc_map_avertv_303(void)
 {
-	return ir_register_map(&avertv_303_map);
+	return rc_map_register(&avertv_303_map);
 }
 
 static void __exit exit_rc_map_avertv_303(void)
 {
-	ir_unregister_map(&avertv_303_map);
+	rc_map_unregister(&avertv_303_map);
 }
 
 module_init(init_rc_map_avertv_303)
diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
index fbaaba5f3893..c3f6d62ac892 100644
--- a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -76,7 +76,7 @@ static struct rc_map_table azurewave_ad_tu700[] = {
 	{ 0x005f, KEY_BLUE },
 };
 
-static struct rc_keymap azurewave_ad_tu700_map = {
+static struct rc_map_list azurewave_ad_tu700_map = {
 	.map = {
 		.scan    = azurewave_ad_tu700,
 		.size    = ARRAY_SIZE(azurewave_ad_tu700),
@@ -87,12 +87,12 @@ static struct rc_keymap azurewave_ad_tu700_map = {
 
 static int __init init_rc_map_azurewave_ad_tu700(void)
 {
-	return ir_register_map(&azurewave_ad_tu700_map);
+	return rc_map_register(&azurewave_ad_tu700_map);
 }
 
 static void __exit exit_rc_map_azurewave_ad_tu700(void)
 {
-	ir_unregister_map(&azurewave_ad_tu700_map);
+	rc_map_unregister(&azurewave_ad_tu700_map);
 }
 
 module_init(init_rc_map_azurewave_ad_tu700)
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 33accf5b3998..4b787fa94f08 100644
--- a/drivers/media/rc/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -82,7 +82,7 @@ static struct rc_map_table behold_columbus[] = {
 
 };
 
-static struct rc_keymap behold_columbus_map = {
+static struct rc_map_list behold_columbus_map = {
 	.map = {
 		.scan    = behold_columbus,
 		.size    = ARRAY_SIZE(behold_columbus),
@@ -93,12 +93,12 @@ static struct rc_keymap behold_columbus_map = {
 
 static int __init init_rc_map_behold_columbus(void)
 {
-	return ir_register_map(&behold_columbus_map);
+	return rc_map_register(&behold_columbus_map);
 }
 
 static void __exit exit_rc_map_behold_columbus(void)
 {
-	ir_unregister_map(&behold_columbus_map);
+	rc_map_unregister(&behold_columbus_map);
 }
 
 module_init(init_rc_map_behold_columbus)
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index 4402414bacd9..ae4d2354c7b9 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -115,7 +115,7 @@ static struct rc_map_table behold[] = {
 
 };
 
-static struct rc_keymap behold_map = {
+static struct rc_map_list behold_map = {
 	.map = {
 		.scan    = behold,
 		.size    = ARRAY_SIZE(behold),
@@ -126,12 +126,12 @@ static struct rc_keymap behold_map = {
 
 static int __init init_rc_map_behold(void)
 {
-	return ir_register_map(&behold_map);
+	return rc_map_register(&behold_map);
 }
 
 static void __exit exit_rc_map_behold(void)
 {
-	ir_unregister_map(&behold_map);
+	rc_map_unregister(&behold_map);
 }
 
 module_init(init_rc_map_behold)
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index e4827a6abf31..97fc3862f608 100644
--- a/drivers/media/rc/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -66,7 +66,7 @@ static struct rc_map_table budget_ci_old[] = {
 	{ 0x3e, KEY_TUNER },
 };
 
-static struct rc_keymap budget_ci_old_map = {
+static struct rc_map_list budget_ci_old_map = {
 	.map = {
 		.scan    = budget_ci_old,
 		.size    = ARRAY_SIZE(budget_ci_old),
@@ -77,12 +77,12 @@ static struct rc_keymap budget_ci_old_map = {
 
 static int __init init_rc_map_budget_ci_old(void)
 {
-	return ir_register_map(&budget_ci_old_map);
+	return rc_map_register(&budget_ci_old_map);
 }
 
 static void __exit exit_rc_map_budget_ci_old(void)
 {
-	ir_unregister_map(&budget_ci_old_map);
+	rc_map_unregister(&budget_ci_old_map);
 }
 
 module_init(init_rc_map_budget_ci_old)
diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
index 6a69866d836c..284534b67e7d 100644
--- a/drivers/media/rc/keymaps/rc-cinergy-1400.c
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -58,7 +58,7 @@ static struct rc_map_table cinergy_1400[] = {
 	{ 0x5c, KEY_NEXT },
 };
 
-static struct rc_keymap cinergy_1400_map = {
+static struct rc_map_list cinergy_1400_map = {
 	.map = {
 		.scan    = cinergy_1400,
 		.size    = ARRAY_SIZE(cinergy_1400),
@@ -69,12 +69,12 @@ static struct rc_keymap cinergy_1400_map = {
 
 static int __init init_rc_map_cinergy_1400(void)
 {
-	return ir_register_map(&cinergy_1400_map);
+	return rc_map_register(&cinergy_1400_map);
 }
 
 static void __exit exit_rc_map_cinergy_1400(void)
 {
-	ir_unregister_map(&cinergy_1400_map);
+	rc_map_unregister(&cinergy_1400_map);
 }
 
 module_init(init_rc_map_cinergy_1400)
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index ba36d14a01a0..99520ff65b61 100644
--- a/drivers/media/rc/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -52,7 +52,7 @@ static struct rc_map_table cinergy[] = {
 	{ 0x23, KEY_STOP },
 };
 
-static struct rc_keymap cinergy_map = {
+static struct rc_map_list cinergy_map = {
 	.map = {
 		.scan    = cinergy,
 		.size    = ARRAY_SIZE(cinergy),
@@ -63,12 +63,12 @@ static struct rc_keymap cinergy_map = {
 
 static int __init init_rc_map_cinergy(void)
 {
-	return ir_register_map(&cinergy_map);
+	return rc_map_register(&cinergy_map);
 }
 
 static void __exit exit_rc_map_cinergy(void)
 {
-	ir_unregister_map(&cinergy_map);
+	rc_map_unregister(&cinergy_map);
 }
 
 module_init(init_rc_map_cinergy)
diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
index 921230d84b84..c59851b203da 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-nec.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -98,7 +98,7 @@ static struct rc_map_table dib0700_nec_table[] = {
 	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
 };
 
-static struct rc_keymap dib0700_nec_map = {
+static struct rc_map_list dib0700_nec_map = {
 	.map = {
 		.scan    = dib0700_nec_table,
 		.size    = ARRAY_SIZE(dib0700_nec_table),
@@ -109,12 +109,12 @@ static struct rc_keymap dib0700_nec_map = {
 
 static int __init init_rc_map(void)
 {
-	return ir_register_map(&dib0700_nec_map);
+	return rc_map_register(&dib0700_nec_map);
 }
 
 static void __exit exit_rc_map(void)
 {
-	ir_unregister_map(&dib0700_nec_map);
+	rc_map_unregister(&dib0700_nec_map);
 }
 
 module_init(init_rc_map)
diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
index 9febb722c402..4af12e45dfba 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-rc5.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -209,7 +209,7 @@ static struct rc_map_table dib0700_rc5_table[] = {
 	{ 0x1d3d, KEY_POWER },
 };
 
-static struct rc_keymap dib0700_rc5_map = {
+static struct rc_map_list dib0700_rc5_map = {
 	.map = {
 		.scan    = dib0700_rc5_table,
 		.size    = ARRAY_SIZE(dib0700_rc5_table),
@@ -220,12 +220,12 @@ static struct rc_keymap dib0700_rc5_map = {
 
 static int __init init_rc_map(void)
 {
-	return ir_register_map(&dib0700_rc5_map);
+	return rc_map_register(&dib0700_rc5_map);
 }
 
 static void __exit exit_rc_map(void)
 {
-	ir_unregister_map(&dib0700_rc5_map);
+	rc_map_unregister(&dib0700_rc5_map);
 }
 
 module_init(init_rc_map)
diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
index da50d7dbb9ef..f68b450f5593 100644
--- a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -72,7 +72,7 @@ static struct rc_map_table digitalnow_tinytwin[] = {
 	{ 0x005a, KEY_PREVIOUS },        /* REPLAY */
 };
 
-static struct rc_keymap digitalnow_tinytwin_map = {
+static struct rc_map_list digitalnow_tinytwin_map = {
 	.map = {
 		.scan    = digitalnow_tinytwin,
 		.size    = ARRAY_SIZE(digitalnow_tinytwin),
@@ -83,12 +83,12 @@ static struct rc_keymap digitalnow_tinytwin_map = {
 
 static int __init init_rc_map_digitalnow_tinytwin(void)
 {
-	return ir_register_map(&digitalnow_tinytwin_map);
+	return rc_map_register(&digitalnow_tinytwin_map);
 }
 
 static void __exit exit_rc_map_digitalnow_tinytwin(void)
 {
-	ir_unregister_map(&digitalnow_tinytwin_map);
+	rc_map_unregister(&digitalnow_tinytwin_map);
 }
 
 module_init(init_rc_map_digitalnow_tinytwin)
diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
index 706f95dd6bdc..21d49871f2a3 100644
--- a/drivers/media/rc/keymaps/rc-digittrade.c
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -56,7 +56,7 @@ static struct rc_map_table digittrade[] = {
 	{ 0x0054, KEY_0 },
 };
 
-static struct rc_keymap digittrade_map = {
+static struct rc_map_list digittrade_map = {
 	.map = {
 		.scan    = digittrade,
 		.size    = ARRAY_SIZE(digittrade),
@@ -67,12 +67,12 @@ static struct rc_keymap digittrade_map = {
 
 static int __init init_rc_map_digittrade(void)
 {
-	return ir_register_map(&digittrade_map);
+	return rc_map_register(&digittrade_map);
 }
 
 static void __exit exit_rc_map_digittrade(void)
 {
-	ir_unregister_map(&digittrade_map);
+	rc_map_unregister(&digittrade_map);
 }
 
 module_init(init_rc_map_digittrade)
diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
index 9023dc9a65aa..d024fbf88bc4 100644
--- a/drivers/media/rc/keymaps/rc-dm1105-nec.c
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -50,7 +50,7 @@ static struct rc_map_table dm1105_nec[] = {
 	{ 0x1b, KEY_B},			/* recall */
 };
 
-static struct rc_keymap dm1105_nec_map = {
+static struct rc_map_list dm1105_nec_map = {
 	.map = {
 		.scan    = dm1105_nec,
 		.size    = ARRAY_SIZE(dm1105_nec),
@@ -61,12 +61,12 @@ static struct rc_keymap dm1105_nec_map = {
 
 static int __init init_rc_map_dm1105_nec(void)
 {
-	return ir_register_map(&dm1105_nec_map);
+	return rc_map_register(&dm1105_nec_map);
 }
 
 static void __exit exit_rc_map_dm1105_nec(void)
 {
-	ir_unregister_map(&dm1105_nec_map);
+	rc_map_unregister(&dm1105_nec_map);
 }
 
 module_init(init_rc_map_dm1105_nec)
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index 7fbeaed46516..43912bd02a9e 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -52,7 +52,7 @@ static struct rc_map_table dntv_live_dvb_t[] = {
 	{ 0x1f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap dntv_live_dvb_t_map = {
+static struct rc_map_list dntv_live_dvb_t_map = {
 	.map = {
 		.scan    = dntv_live_dvb_t,
 		.size    = ARRAY_SIZE(dntv_live_dvb_t),
@@ -63,12 +63,12 @@ static struct rc_keymap dntv_live_dvb_t_map = {
 
 static int __init init_rc_map_dntv_live_dvb_t(void)
 {
-	return ir_register_map(&dntv_live_dvb_t_map);
+	return rc_map_register(&dntv_live_dvb_t_map);
 }
 
 static void __exit exit_rc_map_dntv_live_dvb_t(void)
 {
-	ir_unregister_map(&dntv_live_dvb_t_map);
+	rc_map_unregister(&dntv_live_dvb_t_map);
 }
 
 module_init(init_rc_map_dntv_live_dvb_t)
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
index 660f2e793d9a..015e99de06de 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -71,7 +71,7 @@ static struct rc_map_table dntv_live_dvbt_pro[] = {
 	{ 0x5d, KEY_BLUE },
 };
 
-static struct rc_keymap dntv_live_dvbt_pro_map = {
+static struct rc_map_list dntv_live_dvbt_pro_map = {
 	.map = {
 		.scan    = dntv_live_dvbt_pro,
 		.size    = ARRAY_SIZE(dntv_live_dvbt_pro),
@@ -82,12 +82,12 @@ static struct rc_keymap dntv_live_dvbt_pro_map = {
 
 static int __init init_rc_map_dntv_live_dvbt_pro(void)
 {
-	return ir_register_map(&dntv_live_dvbt_pro_map);
+	return rc_map_register(&dntv_live_dvbt_pro_map);
 }
 
 static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
 {
-	ir_unregister_map(&dntv_live_dvbt_pro_map);
+	rc_map_unregister(&dntv_live_dvbt_pro_map);
 }
 
 module_init(init_rc_map_dntv_live_dvbt_pro)
diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
index 4d0ad8ca41a2..269d4299da34 100644
--- a/drivers/media/rc/keymaps/rc-em-terratec.c
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -43,7 +43,7 @@ static struct rc_map_table em_terratec[] = {
 	{ 0x40, KEY_ZOOM },
 };
 
-static struct rc_keymap em_terratec_map = {
+static struct rc_map_list em_terratec_map = {
 	.map = {
 		.scan    = em_terratec,
 		.size    = ARRAY_SIZE(em_terratec),
@@ -54,12 +54,12 @@ static struct rc_keymap em_terratec_map = {
 
 static int __init init_rc_map_em_terratec(void)
 {
-	return ir_register_map(&em_terratec_map);
+	return rc_map_register(&em_terratec_map);
 }
 
 static void __exit exit_rc_map_em_terratec(void)
 {
-	ir_unregister_map(&em_terratec_map);
+	rc_map_unregister(&em_terratec_map);
 }
 
 module_init(init_rc_map_em_terratec)
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
index 3005d4baf211..e388698a0697 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -55,7 +55,7 @@ static struct rc_map_table encore_enltv_fm53[] = {
 	{ 0x47, KEY_SLEEP},		/* shutdown */
 };
 
-static struct rc_keymap encore_enltv_fm53_map = {
+static struct rc_map_list encore_enltv_fm53_map = {
 	.map = {
 		.scan    = encore_enltv_fm53,
 		.size    = ARRAY_SIZE(encore_enltv_fm53),
@@ -66,12 +66,12 @@ static struct rc_keymap encore_enltv_fm53_map = {
 
 static int __init init_rc_map_encore_enltv_fm53(void)
 {
-	return ir_register_map(&encore_enltv_fm53_map);
+	return rc_map_register(&encore_enltv_fm53_map);
 }
 
 static void __exit exit_rc_map_encore_enltv_fm53(void)
 {
-	ir_unregister_map(&encore_enltv_fm53_map);
+	rc_map_unregister(&encore_enltv_fm53_map);
 }
 
 module_init(init_rc_map_encore_enltv_fm53)
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index d16db500ed31..afa4e92284ef 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -86,7 +86,7 @@ static struct rc_map_table encore_enltv[] = {
 	{ 0x57, KEY_BLUE },		/* AP4 */
 };
 
-static struct rc_keymap encore_enltv_map = {
+static struct rc_map_list encore_enltv_map = {
 	.map = {
 		.scan    = encore_enltv,
 		.size    = ARRAY_SIZE(encore_enltv),
@@ -97,12 +97,12 @@ static struct rc_keymap encore_enltv_map = {
 
 static int __init init_rc_map_encore_enltv(void)
 {
-	return ir_register_map(&encore_enltv_map);
+	return rc_map_register(&encore_enltv_map);
 }
 
 static void __exit exit_rc_map_encore_enltv(void)
 {
-	ir_unregister_map(&encore_enltv_map);
+	rc_map_unregister(&encore_enltv_map);
 }
 
 module_init(init_rc_map_encore_enltv)
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index a5e07c7e6eaf..7d5b00ed4ff2 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -64,7 +64,7 @@ static struct rc_map_table encore_enltv2[] = {
 	{ 0x79, KEY_STOP },
 };
 
-static struct rc_keymap encore_enltv2_map = {
+static struct rc_map_list encore_enltv2_map = {
 	.map = {
 		.scan    = encore_enltv2,
 		.size    = ARRAY_SIZE(encore_enltv2),
@@ -75,12 +75,12 @@ static struct rc_keymap encore_enltv2_map = {
 
 static int __init init_rc_map_encore_enltv2(void)
 {
-	return ir_register_map(&encore_enltv2_map);
+	return rc_map_register(&encore_enltv2_map);
 }
 
 static void __exit exit_rc_map_encore_enltv2(void)
 {
-	ir_unregister_map(&encore_enltv2_map);
+	rc_map_unregister(&encore_enltv2_map);
 }
 
 module_init(init_rc_map_encore_enltv2)
diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
index e2d0590d3323..a2bf24f6dfbb 100644
--- a/drivers/media/rc/keymaps/rc-evga-indtube.c
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -35,7 +35,7 @@ static struct rc_map_table evga_indtube[] = {
 	{ 0x13, KEY_CAMERA},
 };
 
-static struct rc_keymap evga_indtube_map = {
+static struct rc_map_list evga_indtube_map = {
 	.map = {
 		.scan    = evga_indtube,
 		.size    = ARRAY_SIZE(evga_indtube),
@@ -46,12 +46,12 @@ static struct rc_keymap evga_indtube_map = {
 
 static int __init init_rc_map_evga_indtube(void)
 {
-	return ir_register_map(&evga_indtube_map);
+	return rc_map_register(&evga_indtube_map);
 }
 
 static void __exit exit_rc_map_evga_indtube(void)
 {
-	ir_unregister_map(&evga_indtube_map);
+	rc_map_unregister(&evga_indtube_map);
 }
 
 module_init(init_rc_map_evga_indtube)
diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
index ee134c58d033..1e8e5b2d6e36 100644
--- a/drivers/media/rc/keymaps/rc-eztv.c
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -70,7 +70,7 @@ static struct rc_map_table eztv[] = {
 	{ 0x21, KEY_DOT },	/* . (decimal dot) */
 };
 
-static struct rc_keymap eztv_map = {
+static struct rc_map_list eztv_map = {
 	.map = {
 		.scan    = eztv,
 		.size    = ARRAY_SIZE(eztv),
@@ -81,12 +81,12 @@ static struct rc_keymap eztv_map = {
 
 static int __init init_rc_map_eztv(void)
 {
-	return ir_register_map(&eztv_map);
+	return rc_map_register(&eztv_map);
 }
 
 static void __exit exit_rc_map_eztv(void)
 {
-	ir_unregister_map(&eztv_map);
+	rc_map_unregister(&eztv_map);
 }
 
 module_init(init_rc_map_eztv)
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index ef90a05a16f2..aea2f4acf7d8 100644
--- a/drivers/media/rc/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -51,7 +51,7 @@ static struct rc_map_table flydvb[] = {
 	{ 0x0e, KEY_NEXT },		/* End >>| */
 };
 
-static struct rc_keymap flydvb_map = {
+static struct rc_map_list flydvb_map = {
 	.map = {
 		.scan    = flydvb,
 		.size    = ARRAY_SIZE(flydvb),
@@ -62,12 +62,12 @@ static struct rc_keymap flydvb_map = {
 
 static int __init init_rc_map_flydvb(void)
 {
-	return ir_register_map(&flydvb_map);
+	return rc_map_register(&flydvb_map);
 }
 
 static void __exit exit_rc_map_flydvb(void)
 {
-	ir_unregister_map(&flydvb_map);
+	rc_map_unregister(&flydvb_map);
 }
 
 module_init(init_rc_map_flydvb)
diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
index 20a133325e6e..5bbe68371756 100644
--- a/drivers/media/rc/keymaps/rc-flyvideo.c
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -44,7 +44,7 @@ static struct rc_map_table flyvideo[] = {
 	{ 0x0a, KEY_ANGLE },	/* no label, may be used as the PAUSE button */
 };
 
-static struct rc_keymap flyvideo_map = {
+static struct rc_map_list flyvideo_map = {
 	.map = {
 		.scan    = flyvideo,
 		.size    = ARRAY_SIZE(flyvideo),
@@ -55,12 +55,12 @@ static struct rc_keymap flyvideo_map = {
 
 static int __init init_rc_map_flyvideo(void)
 {
-	return ir_register_map(&flyvideo_map);
+	return rc_map_register(&flyvideo_map);
 }
 
 static void __exit exit_rc_map_flyvideo(void)
 {
-	ir_unregister_map(&flyvideo_map);
+	rc_map_unregister(&flyvideo_map);
 }
 
 module_init(init_rc_map_flyvideo)
diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
index 2687af77a806..c80b25c65b57 100644
--- a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -72,7 +72,7 @@ static struct rc_map_table fusionhdtv_mce[] = {
 	{ 0x4e, KEY_POWER },
 };
 
-static struct rc_keymap fusionhdtv_mce_map = {
+static struct rc_map_list fusionhdtv_mce_map = {
 	.map = {
 		.scan    = fusionhdtv_mce,
 		.size    = ARRAY_SIZE(fusionhdtv_mce),
@@ -83,12 +83,12 @@ static struct rc_keymap fusionhdtv_mce_map = {
 
 static int __init init_rc_map_fusionhdtv_mce(void)
 {
-	return ir_register_map(&fusionhdtv_mce_map);
+	return rc_map_register(&fusionhdtv_mce_map);
 }
 
 static void __exit exit_rc_map_fusionhdtv_mce(void)
 {
-	ir_unregister_map(&fusionhdtv_mce_map);
+	rc_map_unregister(&fusionhdtv_mce_map);
 }
 
 module_init(init_rc_map_fusionhdtv_mce)
diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
index fb247baafde1..068c9ead98dd 100644
--- a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -55,7 +55,7 @@ static struct rc_map_table gadmei_rm008z[] = {
 	{ 0x15, KEY_ENTER},		/* OK */
 };
 
-static struct rc_keymap gadmei_rm008z_map = {
+static struct rc_map_list gadmei_rm008z_map = {
 	.map = {
 		.scan    = gadmei_rm008z,
 		.size    = ARRAY_SIZE(gadmei_rm008z),
@@ -66,12 +66,12 @@ static struct rc_keymap gadmei_rm008z_map = {
 
 static int __init init_rc_map_gadmei_rm008z(void)
 {
-	return ir_register_map(&gadmei_rm008z_map);
+	return rc_map_register(&gadmei_rm008z_map);
 }
 
 static void __exit exit_rc_map_gadmei_rm008z(void)
 {
-	ir_unregister_map(&gadmei_rm008z_map);
+	rc_map_unregister(&gadmei_rm008z_map);
 }
 
 module_init(init_rc_map_gadmei_rm008z)
diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
index 7e6834acc87f..cdbbed467926 100644
--- a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -58,7 +58,7 @@ static struct rc_map_table genius_tvgo_a11mce[] = {
 	{ 0x50, KEY_BLUE },
 };
 
-static struct rc_keymap genius_tvgo_a11mce_map = {
+static struct rc_map_list genius_tvgo_a11mce_map = {
 	.map = {
 		.scan    = genius_tvgo_a11mce,
 		.size    = ARRAY_SIZE(genius_tvgo_a11mce),
@@ -69,12 +69,12 @@ static struct rc_keymap genius_tvgo_a11mce_map = {
 
 static int __init init_rc_map_genius_tvgo_a11mce(void)
 {
-	return ir_register_map(&genius_tvgo_a11mce_map);
+	return rc_map_register(&genius_tvgo_a11mce_map);
 }
 
 static void __exit exit_rc_map_genius_tvgo_a11mce(void)
 {
-	ir_unregister_map(&genius_tvgo_a11mce_map);
+	rc_map_unregister(&genius_tvgo_a11mce_map);
 }
 
 module_init(init_rc_map_genius_tvgo_a11mce)
diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
index 54222caeff7c..a38bdde8c140 100644
--- a/drivers/media/rc/keymaps/rc-gotview7135.c
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -53,7 +53,7 @@ static struct rc_map_table gotview7135[] = {
 	{ 0x38, KEY_F24 },	/* NORMAL TIMESHIFT */
 };
 
-static struct rc_keymap gotview7135_map = {
+static struct rc_map_list gotview7135_map = {
 	.map = {
 		.scan    = gotview7135,
 		.size    = ARRAY_SIZE(gotview7135),
@@ -64,12 +64,12 @@ static struct rc_keymap gotview7135_map = {
 
 static int __init init_rc_map_gotview7135(void)
 {
-	return ir_register_map(&gotview7135_map);
+	return rc_map_register(&gotview7135_map);
 }
 
 static void __exit exit_rc_map_gotview7135(void)
 {
-	ir_unregister_map(&gotview7135_map);
+	rc_map_unregister(&gotview7135_map);
 }
 
 module_init(init_rc_map_gotview7135)
diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
index 239625785f68..bd11da46e56a 100644
--- a/drivers/media/rc/keymaps/rc-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c
@@ -74,7 +74,7 @@ static struct rc_map_table hauppauge_new[] = {
 	{ 0x3d, KEY_POWER },		/* system power (green button) */
 };
 
-static struct rc_keymap hauppauge_new_map = {
+static struct rc_map_list hauppauge_new_map = {
 	.map = {
 		.scan    = hauppauge_new,
 		.size    = ARRAY_SIZE(hauppauge_new),
@@ -85,12 +85,12 @@ static struct rc_keymap hauppauge_new_map = {
 
 static int __init init_rc_map_hauppauge_new(void)
 {
-	return ir_register_map(&hauppauge_new_map);
+	return rc_map_register(&hauppauge_new_map);
 }
 
 static void __exit exit_rc_map_hauppauge_new(void)
 {
-	ir_unregister_map(&hauppauge_new_map);
+	rc_map_unregister(&hauppauge_new_map);
 }
 
 module_init(init_rc_map_hauppauge_new)
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index 291e5d8850ec..cb67184e015c 100644
--- a/drivers/media/rc/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -115,7 +115,7 @@ static struct rc_map_table imon_mce[] = {
 
 };
 
-static struct rc_keymap imon_mce_map = {
+static struct rc_map_list imon_mce_map = {
 	.map = {
 		.scan    = imon_mce,
 		.size    = ARRAY_SIZE(imon_mce),
@@ -127,12 +127,12 @@ static struct rc_keymap imon_mce_map = {
 
 static int __init init_rc_map_imon_mce(void)
 {
-	return ir_register_map(&imon_mce_map);
+	return rc_map_register(&imon_mce_map);
 }
 
 static void __exit exit_rc_map_imon_mce(void)
 {
-	ir_unregister_map(&imon_mce_map);
+	rc_map_unregister(&imon_mce_map);
 }
 
 module_init(init_rc_map_imon_mce)
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index 33f28d428ef9..eef46b73ca7b 100644
--- a/drivers/media/rc/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -129,7 +129,7 @@ static struct rc_map_table imon_pad[] = {
 	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
 };
 
-static struct rc_keymap imon_pad_map = {
+static struct rc_map_list imon_pad_map = {
 	.map = {
 		.scan    = imon_pad,
 		.size    = ARRAY_SIZE(imon_pad),
@@ -141,12 +141,12 @@ static struct rc_keymap imon_pad_map = {
 
 static int __init init_rc_map_imon_pad(void)
 {
-	return ir_register_map(&imon_pad_map);
+	return rc_map_register(&imon_pad_map);
 }
 
 static void __exit exit_rc_map_imon_pad(void)
 {
-	ir_unregister_map(&imon_pad_map);
+	rc_map_unregister(&imon_pad_map);
 }
 
 module_init(init_rc_map_imon_pad)
diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
index 5e5263f2380d..1f59e163f75d 100644
--- a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -62,7 +62,7 @@ static struct rc_map_table iodata_bctv7e[] = {
 	{ 0x01, KEY_NEXT },		/* skip >| */
 };
 
-static struct rc_keymap iodata_bctv7e_map = {
+static struct rc_map_list iodata_bctv7e_map = {
 	.map = {
 		.scan    = iodata_bctv7e,
 		.size    = ARRAY_SIZE(iodata_bctv7e),
@@ -73,12 +73,12 @@ static struct rc_keymap iodata_bctv7e_map = {
 
 static int __init init_rc_map_iodata_bctv7e(void)
 {
-	return ir_register_map(&iodata_bctv7e_map);
+	return rc_map_register(&iodata_bctv7e_map);
 }
 
 static void __exit exit_rc_map_iodata_bctv7e(void)
 {
-	ir_unregister_map(&iodata_bctv7e_map);
+	rc_map_unregister(&iodata_bctv7e_map);
 }
 
 module_init(init_rc_map_iodata_bctv7e)
diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
index 527ab1b5fb6f..f31dc5c1ad9c 100644
--- a/drivers/media/rc/keymaps/rc-kaiomy.c
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -61,7 +61,7 @@ static struct rc_map_table kaiomy[] = {
 	{ 0x1f, KEY_BLUE},
 };
 
-static struct rc_keymap kaiomy_map = {
+static struct rc_map_list kaiomy_map = {
 	.map = {
 		.scan    = kaiomy,
 		.size    = ARRAY_SIZE(kaiomy),
@@ -72,12 +72,12 @@ static struct rc_keymap kaiomy_map = {
 
 static int __init init_rc_map_kaiomy(void)
 {
-	return ir_register_map(&kaiomy_map);
+	return rc_map_register(&kaiomy_map);
 }
 
 static void __exit exit_rc_map_kaiomy(void)
 {
-	ir_unregister_map(&kaiomy_map);
+	rc_map_unregister(&kaiomy_map);
 }
 
 module_init(init_rc_map_kaiomy)
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index f58703e2a3ac..3ce6ef79fc34 100644
--- a/drivers/media/rc/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -57,7 +57,7 @@ static struct rc_map_table kworld_315u[] = {
 	{ 0x611f, KEY_BLUE },
 };
 
-static struct rc_keymap kworld_315u_map = {
+static struct rc_map_list kworld_315u_map = {
 	.map = {
 		.scan    = kworld_315u,
 		.size    = ARRAY_SIZE(kworld_315u),
@@ -68,12 +68,12 @@ static struct rc_keymap kworld_315u_map = {
 
 static int __init init_rc_map_kworld_315u(void)
 {
-	return ir_register_map(&kworld_315u_map);
+	return rc_map_register(&kworld_315u_map);
 }
 
 static void __exit exit_rc_map_kworld_315u(void)
 {
-	ir_unregister_map(&kworld_315u_map);
+	rc_map_unregister(&kworld_315u_map);
 }
 
 module_init(init_rc_map_kworld_315u)
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index f6235bbad507..e45f0b8759d0 100644
--- a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -73,7 +73,7 @@ static struct rc_map_table kworld_plus_tv_analog[] = {
 	{ 0x23, KEY_GREEN},		/* C */
 };
 
-static struct rc_keymap kworld_plus_tv_analog_map = {
+static struct rc_map_list kworld_plus_tv_analog_map = {
 	.map = {
 		.scan    = kworld_plus_tv_analog,
 		.size    = ARRAY_SIZE(kworld_plus_tv_analog),
@@ -84,12 +84,12 @@ static struct rc_keymap kworld_plus_tv_analog_map = {
 
 static int __init init_rc_map_kworld_plus_tv_analog(void)
 {
-	return ir_register_map(&kworld_plus_tv_analog_map);
+	return rc_map_register(&kworld_plus_tv_analog_map);
 }
 
 static void __exit exit_rc_map_kworld_plus_tv_analog(void)
 {
-	ir_unregister_map(&kworld_plus_tv_analog_map);
+	rc_map_unregister(&kworld_plus_tv_analog_map);
 }
 
 module_init(init_rc_map_kworld_plus_tv_analog)
diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
index e1b8726daa51..8faa54ff16e6 100644
--- a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -73,7 +73,7 @@ static struct rc_map_table leadtek_y04g0051[] = {
 	{ 0x035f, KEY_CHANNELDOWN },
 };
 
-static struct rc_keymap leadtek_y04g0051_map = {
+static struct rc_map_list leadtek_y04g0051_map = {
 	.map = {
 		.scan    = leadtek_y04g0051,
 		.size    = ARRAY_SIZE(leadtek_y04g0051),
@@ -84,12 +84,12 @@ static struct rc_keymap leadtek_y04g0051_map = {
 
 static int __init init_rc_map_leadtek_y04g0051(void)
 {
-	return ir_register_map(&leadtek_y04g0051_map);
+	return rc_map_register(&leadtek_y04g0051_map);
 }
 
 static void __exit exit_rc_map_leadtek_y04g0051(void)
 {
-	ir_unregister_map(&leadtek_y04g0051_map);
+	rc_map_unregister(&leadtek_y04g0051_map);
 }
 
 module_init(init_rc_map_leadtek_y04g0051)
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index d4dfee72b8ca..e8e23e233c39 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -15,7 +15,7 @@ static struct rc_map_table lirc[] = {
 	{ },
 };
 
-static struct rc_keymap lirc_map = {
+static struct rc_map_list lirc_map = {
 	.map = {
 		.scan    = lirc,
 		.size    = ARRAY_SIZE(lirc),
@@ -26,12 +26,12 @@ static struct rc_keymap lirc_map = {
 
 static int __init init_rc_map_lirc(void)
 {
-	return ir_register_map(&lirc_map);
+	return rc_map_register(&lirc_map);
 }
 
 static void __exit exit_rc_map_lirc(void)
 {
-	ir_unregister_map(&lirc_map);
+	rc_map_unregister(&lirc_map);
 }
 
 module_init(init_rc_map_lirc)
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index eb2d39698ef0..875cd81477c7 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -42,7 +42,7 @@ static struct rc_map_table lme2510_rc[] = {
 
 };
 
-static struct rc_keymap lme2510_map = {
+static struct rc_map_list lme2510_map = {
 	.map = {
 		.scan    = lme2510_rc,
 		.size    = ARRAY_SIZE(lme2510_rc),
@@ -53,12 +53,12 @@ static struct rc_keymap lme2510_map = {
 
 static int __init init_rc_lme2510_map(void)
 {
-	return ir_register_map(&lme2510_map);
+	return rc_map_register(&lme2510_map);
 }
 
 static void __exit exit_rc_lme2510_map(void)
 {
-	ir_unregister_map(&lme2510_map);
+	rc_map_unregister(&lme2510_map);
 }
 
 module_init(init_rc_lme2510_map)
diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
index b24b0821da5a..23b2d04e7a9f 100644
--- a/drivers/media/rc/keymaps/rc-manli.c
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -108,7 +108,7 @@ static struct rc_map_table manli[] = {
 	/* 0x1d unused ? */
 };
 
-static struct rc_keymap manli_map = {
+static struct rc_map_list manli_map = {
 	.map = {
 		.scan    = manli,
 		.size    = ARRAY_SIZE(manli),
@@ -119,12 +119,12 @@ static struct rc_keymap manli_map = {
 
 static int __init init_rc_map_manli(void)
 {
-	return ir_register_map(&manli_map);
+	return rc_map_register(&manli_map);
 }
 
 static void __exit exit_rc_map_manli(void)
 {
-	ir_unregister_map(&manli_map);
+	rc_map_unregister(&manli_map);
 }
 
 module_init(init_rc_map_manli)
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index 4ad89b79a3e8..7b9a01b6e4cf 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -41,7 +41,7 @@ static struct rc_map_table msi_digivox_ii[] = {
 	{ 0x001f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap msi_digivox_ii_map = {
+static struct rc_map_list msi_digivox_ii_map = {
 	.map = {
 		.scan    = msi_digivox_ii,
 		.size    = ARRAY_SIZE(msi_digivox_ii),
@@ -52,12 +52,12 @@ static struct rc_keymap msi_digivox_ii_map = {
 
 static int __init init_rc_map_msi_digivox_ii(void)
 {
-	return ir_register_map(&msi_digivox_ii_map);
+	return rc_map_register(&msi_digivox_ii_map);
 }
 
 static void __exit exit_rc_map_msi_digivox_ii(void)
 {
-	ir_unregister_map(&msi_digivox_ii_map);
+	rc_map_unregister(&msi_digivox_ii_map);
 }
 
 module_init(init_rc_map_msi_digivox_ii)
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
index d3304e798356..ae9d06b39157 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -59,7 +59,7 @@ static struct rc_map_table msi_digivox_iii[] = {
 	{ 0x61d643, KEY_POWER2 },          /* [red power button] */
 };
 
-static struct rc_keymap msi_digivox_iii_map = {
+static struct rc_map_list msi_digivox_iii_map = {
 	.map = {
 		.scan    = msi_digivox_iii,
 		.size    = ARRAY_SIZE(msi_digivox_iii),
@@ -70,12 +70,12 @@ static struct rc_keymap msi_digivox_iii_map = {
 
 static int __init init_rc_map_msi_digivox_iii(void)
 {
-	return ir_register_map(&msi_digivox_iii_map);
+	return rc_map_register(&msi_digivox_iii_map);
 }
 
 static void __exit exit_rc_map_msi_digivox_iii(void)
 {
-	ir_unregister_map(&msi_digivox_iii_map);
+	rc_map_unregister(&msi_digivox_iii_map);
 }
 
 module_init(init_rc_map_msi_digivox_iii)
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index 51999c469884..fa8fd0ab94c7 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -97,7 +97,7 @@ static struct rc_map_table msi_tvanywhere_plus[] = {
 	{ 0x1d, KEY_RESTART },		/* Reset */
 };
 
-static struct rc_keymap msi_tvanywhere_plus_map = {
+static struct rc_map_list msi_tvanywhere_plus_map = {
 	.map = {
 		.scan    = msi_tvanywhere_plus,
 		.size    = ARRAY_SIZE(msi_tvanywhere_plus),
@@ -108,12 +108,12 @@ static struct rc_keymap msi_tvanywhere_plus_map = {
 
 static int __init init_rc_map_msi_tvanywhere_plus(void)
 {
-	return ir_register_map(&msi_tvanywhere_plus_map);
+	return rc_map_register(&msi_tvanywhere_plus_map);
 }
 
 static void __exit exit_rc_map_msi_tvanywhere_plus(void)
 {
-	ir_unregister_map(&msi_tvanywhere_plus_map);
+	rc_map_unregister(&msi_tvanywhere_plus_map);
 }
 
 module_init(init_rc_map_msi_tvanywhere_plus)
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index 619df9dcbf12..18b37facb0dd 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -43,7 +43,7 @@ static struct rc_map_table msi_tvanywhere[] = {
 	{ 0x1f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap msi_tvanywhere_map = {
+static struct rc_map_list msi_tvanywhere_map = {
 	.map = {
 		.scan    = msi_tvanywhere,
 		.size    = ARRAY_SIZE(msi_tvanywhere),
@@ -54,12 +54,12 @@ static struct rc_keymap msi_tvanywhere_map = {
 
 static int __init init_rc_map_msi_tvanywhere(void)
 {
-	return ir_register_map(&msi_tvanywhere_map);
+	return rc_map_register(&msi_tvanywhere_map);
 }
 
 static void __exit exit_rc_map_msi_tvanywhere(void)
 {
-	ir_unregister_map(&msi_tvanywhere_map);
+	rc_map_unregister(&msi_tvanywhere_map);
 }
 
 module_init(init_rc_map_msi_tvanywhere)
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index 8672859aaad1..3e6f077eb700 100644
--- a/drivers/media/rc/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -70,7 +70,7 @@ static struct rc_map_table nebula[] = {
 	{ 0x36, KEY_PC },
 };
 
-static struct rc_keymap nebula_map = {
+static struct rc_map_list nebula_map = {
 	.map = {
 		.scan    = nebula,
 		.size    = ARRAY_SIZE(nebula),
@@ -81,12 +81,12 @@ static struct rc_keymap nebula_map = {
 
 static int __init init_rc_map_nebula(void)
 {
-	return ir_register_map(&nebula_map);
+	return rc_map_register(&nebula_map);
 }
 
 static void __exit exit_rc_map_nebula(void)
 {
-	ir_unregister_map(&nebula_map);
+	rc_map_unregister(&nebula_map);
 }
 
 module_init(init_rc_map_nebula)
diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
index 2f560dc791c0..26f114c5c0de 100644
--- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -79,7 +79,7 @@ static struct rc_map_table nec_terratec_cinergy_xs[] = {
 	{ 0x145c, KEY_NEXT},
 };
 
-static struct rc_keymap nec_terratec_cinergy_xs_map = {
+static struct rc_map_list nec_terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = nec_terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(nec_terratec_cinergy_xs),
@@ -90,12 +90,12 @@ static struct rc_keymap nec_terratec_cinergy_xs_map = {
 
 static int __init init_rc_map_nec_terratec_cinergy_xs(void)
 {
-	return ir_register_map(&nec_terratec_cinergy_xs_map);
+	return rc_map_register(&nec_terratec_cinergy_xs_map);
 }
 
 static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
 {
-	ir_unregister_map(&nec_terratec_cinergy_xs_map);
+	rc_map_unregister(&nec_terratec_cinergy_xs_map);
 }
 
 module_init(init_rc_map_nec_terratec_cinergy_xs)
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index f4a85033b297..629ee9d84537 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -59,7 +59,7 @@ static struct rc_map_table norwood[] = {
 	{ 0x65, KEY_POWER },		/* Computer power      */
 };
 
-static struct rc_keymap norwood_map = {
+static struct rc_map_list norwood_map = {
 	.map = {
 		.scan    = norwood,
 		.size    = ARRAY_SIZE(norwood),
@@ -70,12 +70,12 @@ static struct rc_keymap norwood_map = {
 
 static int __init init_rc_map_norwood(void)
 {
-	return ir_register_map(&norwood_map);
+	return rc_map_register(&norwood_map);
 }
 
 static void __exit exit_rc_map_norwood(void)
 {
-	ir_unregister_map(&norwood_map);
+	rc_map_unregister(&norwood_map);
 }
 
 module_init(init_rc_map_norwood)
diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
index fdfa549323cc..4aa588bf6d69 100644
--- a/drivers/media/rc/keymaps/rc-npgtech.c
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -54,7 +54,7 @@ static struct rc_map_table npgtech[] = {
 
 };
 
-static struct rc_keymap npgtech_map = {
+static struct rc_map_list npgtech_map = {
 	.map = {
 		.scan    = npgtech,
 		.size    = ARRAY_SIZE(npgtech),
@@ -65,12 +65,12 @@ static struct rc_keymap npgtech_map = {
 
 static int __init init_rc_map_npgtech(void)
 {
-	return ir_register_map(&npgtech_map);
+	return rc_map_register(&npgtech_map);
 }
 
 static void __exit exit_rc_map_npgtech(void)
 {
-	ir_unregister_map(&npgtech_map);
+	rc_map_unregister(&npgtech_map);
 }
 
 module_init(init_rc_map_npgtech)
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index 86c1101c47df..fa5ae5981eb8 100644
--- a/drivers/media/rc/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -54,7 +54,7 @@ static struct rc_map_table pctv_sedna[] = {
 	{ 0x1f, KEY_PLAY },	/* Play */
 };
 
-static struct rc_keymap pctv_sedna_map = {
+static struct rc_map_list pctv_sedna_map = {
 	.map = {
 		.scan    = pctv_sedna,
 		.size    = ARRAY_SIZE(pctv_sedna),
@@ -65,12 +65,12 @@ static struct rc_keymap pctv_sedna_map = {
 
 static int __init init_rc_map_pctv_sedna(void)
 {
-	return ir_register_map(&pctv_sedna_map);
+	return rc_map_register(&pctv_sedna_map);
 }
 
 static void __exit exit_rc_map_pctv_sedna(void)
 {
-	ir_unregister_map(&pctv_sedna_map);
+	rc_map_unregister(&pctv_sedna_map);
 }
 
 module_init(init_rc_map_pctv_sedna)
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
index d3f4cd411e3b..23b8c505c6aa 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-color.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -68,7 +68,7 @@ static struct rc_map_table pinnacle_color[] = {
 	{ 0x0a, KEY_BACKSPACE },
 };
 
-static struct rc_keymap pinnacle_color_map = {
+static struct rc_map_list pinnacle_color_map = {
 	.map = {
 		.scan    = pinnacle_color,
 		.size    = ARRAY_SIZE(pinnacle_color),
@@ -79,12 +79,12 @@ static struct rc_keymap pinnacle_color_map = {
 
 static int __init init_rc_map_pinnacle_color(void)
 {
-	return ir_register_map(&pinnacle_color_map);
+	return rc_map_register(&pinnacle_color_map);
 }
 
 static void __exit exit_rc_map_pinnacle_color(void)
 {
-	ir_unregister_map(&pinnacle_color_map);
+	rc_map_unregister(&pinnacle_color_map);
 }
 
 module_init(init_rc_map_pinnacle_color)
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
index 1f48b43e4939..6ba8c368d10a 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-grey.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -63,7 +63,7 @@ static struct rc_map_table pinnacle_grey[] = {
 	{ 0x18, KEY_EPG },
 };
 
-static struct rc_keymap pinnacle_grey_map = {
+static struct rc_map_list pinnacle_grey_map = {
 	.map = {
 		.scan    = pinnacle_grey,
 		.size    = ARRAY_SIZE(pinnacle_grey),
@@ -74,12 +74,12 @@ static struct rc_keymap pinnacle_grey_map = {
 
 static int __init init_rc_map_pinnacle_grey(void)
 {
-	return ir_register_map(&pinnacle_grey_map);
+	return rc_map_register(&pinnacle_grey_map);
 }
 
 static void __exit exit_rc_map_pinnacle_grey(void)
 {
-	ir_unregister_map(&pinnacle_grey_map);
+	rc_map_unregister(&pinnacle_grey_map);
 }
 
 module_init(init_rc_map_pinnacle_grey)
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index dc7267c2d04a..bb10ffe086b4 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -47,7 +47,7 @@ static struct rc_map_table pinnacle_pctv_hd[] = {
 	{ 0x3f, KEY_EPG },	/* Labeled "?" */
 };
 
-static struct rc_keymap pinnacle_pctv_hd_map = {
+static struct rc_map_list pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
@@ -58,12 +58,12 @@ static struct rc_keymap pinnacle_pctv_hd_map = {
 
 static int __init init_rc_map_pinnacle_pctv_hd(void)
 {
-	return ir_register_map(&pinnacle_pctv_hd_map);
+	return rc_map_register(&pinnacle_pctv_hd_map);
 }
 
 static void __exit exit_rc_map_pinnacle_pctv_hd(void)
 {
-	ir_unregister_map(&pinnacle_pctv_hd_map);
+	rc_map_unregister(&pinnacle_pctv_hd_map);
 }
 
 module_init(init_rc_map_pinnacle_pctv_hd)
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 93f72487a7bb..8d9f664e0a2d 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -57,7 +57,7 @@ static struct rc_map_table pixelview_mk12[] = {
 	{ 0x866b07, KEY_RADIO },	/* FM */
 };
 
-static struct rc_keymap pixelview_map = {
+static struct rc_map_list pixelview_map = {
 	.map = {
 		.scan    = pixelview_mk12,
 		.size    = ARRAY_SIZE(pixelview_mk12),
@@ -68,12 +68,12 @@ static struct rc_keymap pixelview_map = {
 
 static int __init init_rc_map_pixelview(void)
 {
-	return ir_register_map(&pixelview_map);
+	return rc_map_register(&pixelview_map);
 }
 
 static void __exit exit_rc_map_pixelview(void)
 {
-	ir_unregister_map(&pixelview_map);
+	rc_map_unregister(&pixelview_map);
 }
 
 module_init(init_rc_map_pixelview)
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index e6d60d2cf271..777a70076be2 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -57,7 +57,7 @@ static struct rc_map_table pixelview_new[] = {
 	{ 0x34, KEY_RADIO },
 };
 
-static struct rc_keymap pixelview_new_map = {
+static struct rc_map_list pixelview_new_map = {
 	.map = {
 		.scan    = pixelview_new,
 		.size    = ARRAY_SIZE(pixelview_new),
@@ -68,12 +68,12 @@ static struct rc_keymap pixelview_new_map = {
 
 static int __init init_rc_map_pixelview_new(void)
 {
-	return ir_register_map(&pixelview_new_map);
+	return rc_map_register(&pixelview_new_map);
 }
 
 static void __exit exit_rc_map_pixelview_new(void)
 {
-	ir_unregister_map(&pixelview_new_map);
+	rc_map_unregister(&pixelview_new_map);
 }
 
 module_init(init_rc_map_pixelview_new)
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 2a767102a164..0ec5988916b9 100644
--- a/drivers/media/rc/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -56,7 +56,7 @@ static struct rc_map_table pixelview[] = {
 	{ 0x18, KEY_MUTE },		/* mute/unmute */
 };
 
-static struct rc_keymap pixelview_map = {
+static struct rc_map_list pixelview_map = {
 	.map = {
 		.scan    = pixelview,
 		.size    = ARRAY_SIZE(pixelview),
@@ -67,12 +67,12 @@ static struct rc_keymap pixelview_map = {
 
 static int __init init_rc_map_pixelview(void)
 {
-	return ir_register_map(&pixelview_map);
+	return rc_map_register(&pixelview_map);
 }
 
 static void __exit exit_rc_map_pixelview(void)
 {
-	ir_unregister_map(&pixelview_map);
+	rc_map_unregister(&pixelview_map);
 }
 
 module_init(init_rc_map_pixelview)
diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
index 7cc0d57df3be..5f9d546a86c4 100644
--- a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -55,7 +55,7 @@ static struct rc_map_table powercolor_real_angel[] = {
 	{ 0x25, KEY_POWER },		/* power */
 };
 
-static struct rc_keymap powercolor_real_angel_map = {
+static struct rc_map_list powercolor_real_angel_map = {
 	.map = {
 		.scan    = powercolor_real_angel,
 		.size    = ARRAY_SIZE(powercolor_real_angel),
@@ -66,12 +66,12 @@ static struct rc_keymap powercolor_real_angel_map = {
 
 static int __init init_rc_map_powercolor_real_angel(void)
 {
-	return ir_register_map(&powercolor_real_angel_map);
+	return rc_map_register(&powercolor_real_angel_map);
 }
 
 static void __exit exit_rc_map_powercolor_real_angel(void)
 {
-	ir_unregister_map(&powercolor_real_angel_map);
+	rc_map_unregister(&powercolor_real_angel_map);
 }
 
 module_init(init_rc_map_powercolor_real_angel)
diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
index d5e62a50c1df..8a3a643879d4 100644
--- a/drivers/media/rc/keymaps/rc-proteus-2309.c
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -43,7 +43,7 @@ static struct rc_map_table proteus_2309[] = {
 	{ 0x14, KEY_F1 },
 };
 
-static struct rc_keymap proteus_2309_map = {
+static struct rc_map_list proteus_2309_map = {
 	.map = {
 		.scan    = proteus_2309,
 		.size    = ARRAY_SIZE(proteus_2309),
@@ -54,12 +54,12 @@ static struct rc_keymap proteus_2309_map = {
 
 static int __init init_rc_map_proteus_2309(void)
 {
-	return ir_register_map(&proteus_2309_map);
+	return rc_map_register(&proteus_2309_map);
 }
 
 static void __exit exit_rc_map_proteus_2309(void)
 {
-	ir_unregister_map(&proteus_2309_map);
+	rc_map_unregister(&proteus_2309_map);
 }
 
 module_init(init_rc_map_proteus_2309)
diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
index 5dbfd913b211..ef90296bfd68 100644
--- a/drivers/media/rc/keymaps/rc-purpletv.c
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -55,7 +55,7 @@ static struct rc_map_table purpletv[] = {
 
 };
 
-static struct rc_keymap purpletv_map = {
+static struct rc_map_list purpletv_map = {
 	.map = {
 		.scan    = purpletv,
 		.size    = ARRAY_SIZE(purpletv),
@@ -66,12 +66,12 @@ static struct rc_keymap purpletv_map = {
 
 static int __init init_rc_map_purpletv(void)
 {
-	return ir_register_map(&purpletv_map);
+	return rc_map_register(&purpletv_map);
 }
 
 static void __exit exit_rc_map_purpletv(void)
 {
-	ir_unregister_map(&purpletv_map);
+	rc_map_unregister(&purpletv_map);
 }
 
 module_init(init_rc_map_purpletv)
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index d9c7e2f26add..83a418de12c6 100644
--- a/drivers/media/rc/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -52,7 +52,7 @@ static struct rc_map_table pv951[] = {
 	{ 0x1c, KEY_MEDIA },		/* PC/TV */
 };
 
-static struct rc_keymap pv951_map = {
+static struct rc_map_list pv951_map = {
 	.map = {
 		.scan    = pv951,
 		.size    = ARRAY_SIZE(pv951),
@@ -63,12 +63,12 @@ static struct rc_keymap pv951_map = {
 
 static int __init init_rc_map_pv951(void)
 {
-	return ir_register_map(&pv951_map);
+	return rc_map_register(&pv951_map);
 }
 
 static void __exit exit_rc_map_pv951(void)
 {
-	ir_unregister_map(&pv951_map);
+	rc_map_unregister(&pv951_map);
 }
 
 module_init(init_rc_map_pv951)
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
index eef2e8714542..df534b08959e 100644
--- a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -77,7 +77,7 @@ static struct rc_map_table rc5_hauppauge_new[] = {
 	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
 };
 
-static struct rc_keymap rc5_hauppauge_new_map = {
+static struct rc_map_list rc5_hauppauge_new_map = {
 	.map = {
 		.scan    = rc5_hauppauge_new,
 		.size    = ARRAY_SIZE(rc5_hauppauge_new),
@@ -88,12 +88,12 @@ static struct rc_keymap rc5_hauppauge_new_map = {
 
 static int __init init_rc_map_rc5_hauppauge_new(void)
 {
-	return ir_register_map(&rc5_hauppauge_new_map);
+	return rc_map_register(&rc5_hauppauge_new_map);
 }
 
 static void __exit exit_rc_map_rc5_hauppauge_new(void)
 {
-	ir_unregister_map(&rc5_hauppauge_new_map);
+	rc_map_unregister(&rc5_hauppauge_new_map);
 }
 
 module_init(init_rc_map_rc5_hauppauge_new)
diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
index efa14882e762..4fcef9f1f721 100644
--- a/drivers/media/rc/keymaps/rc-rc5-tv.c
+++ b/drivers/media/rc/keymaps/rc-rc5-tv.c
@@ -55,7 +55,7 @@ static struct rc_map_table rc5_tv[] = {
 
 };
 
-static struct rc_keymap rc5_tv_map = {
+static struct rc_map_list rc5_tv_map = {
 	.map = {
 		.scan    = rc5_tv,
 		.size    = ARRAY_SIZE(rc5_tv),
@@ -66,12 +66,12 @@ static struct rc_keymap rc5_tv_map = {
 
 static int __init init_rc_map_rc5_tv(void)
 {
-	return ir_register_map(&rc5_tv_map);
+	return rc_map_register(&rc5_tv_map);
 }
 
 static void __exit exit_rc_map_rc5_tv(void)
 {
-	ir_unregister_map(&rc5_tv_map);
+	rc_map_unregister(&rc5_tv_map);
 }
 
 module_init(init_rc_map_rc5_tv)
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 81f41723fde3..3bf3337875d1 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -87,7 +87,7 @@ static struct rc_map_table rc6_mce[] = {
 	{ 0x800f0481, KEY_PLAYPAUSE },
 };
 
-static struct rc_keymap rc6_mce_map = {
+static struct rc_map_list rc6_mce_map = {
 	.map = {
 		.scan    = rc6_mce,
 		.size    = ARRAY_SIZE(rc6_mce),
@@ -98,12 +98,12 @@ static struct rc_keymap rc6_mce_map = {
 
 static int __init init_rc_map_rc6_mce(void)
 {
-	return ir_register_map(&rc6_mce_map);
+	return rc_map_register(&rc6_mce_map);
 }
 
 static void __exit exit_rc_map_rc6_mce(void)
 {
-	ir_unregister_map(&rc6_mce_map);
+	rc_map_unregister(&rc6_mce_map);
 }
 
 module_init(init_rc_map_rc6_mce)
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index 884416ca0ebe..2d14598592d8 100644
--- a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -52,7 +52,7 @@ static struct rc_map_table real_audio_220_32_keys[] = {
 
 };
 
-static struct rc_keymap real_audio_220_32_keys_map = {
+static struct rc_map_list real_audio_220_32_keys_map = {
 	.map = {
 		.scan    = real_audio_220_32_keys,
 		.size    = ARRAY_SIZE(real_audio_220_32_keys),
@@ -63,12 +63,12 @@ static struct rc_keymap real_audio_220_32_keys_map = {
 
 static int __init init_rc_map_real_audio_220_32_keys(void)
 {
-	return ir_register_map(&real_audio_220_32_keys_map);
+	return rc_map_register(&real_audio_220_32_keys_map);
 }
 
 static void __exit exit_rc_map_real_audio_220_32_keys(void)
 {
-	ir_unregister_map(&real_audio_220_32_keys_map);
+	rc_map_unregister(&real_audio_220_32_keys_map);
 }
 
 module_init(init_rc_map_real_audio_220_32_keys)
diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
index 5a86a7151488..92cc10d2f9cd 100644
--- a/drivers/media/rc/keymaps/rc-streamzap.c
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -56,7 +56,7 @@ static struct rc_map_table streamzap[] = {
 
 };
 
-static struct rc_keymap streamzap_map = {
+static struct rc_map_list streamzap_map = {
 	.map = {
 		.scan    = streamzap,
 		.size    = ARRAY_SIZE(streamzap),
@@ -67,12 +67,12 @@ static struct rc_keymap streamzap_map = {
 
 static int __init init_rc_map_streamzap(void)
 {
-	return ir_register_map(&streamzap_map);
+	return rc_map_register(&streamzap_map);
 }
 
 static void __exit exit_rc_map_streamzap(void)
 {
-	ir_unregister_map(&streamzap_map);
+	rc_map_unregister(&streamzap_map);
 }
 
 module_init(init_rc_map_streamzap)
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
index 6e2f5b5b7740..15b9a9b80767 100644
--- a/drivers/media/rc/keymaps/rc-tbs-nec.c
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -47,7 +47,7 @@ static struct rc_map_table tbs_nec[] = {
 	{ 0x1b, KEY_MODE},
 };
 
-static struct rc_keymap tbs_nec_map = {
+static struct rc_map_list tbs_nec_map = {
 	.map = {
 		.scan    = tbs_nec,
 		.size    = ARRAY_SIZE(tbs_nec),
@@ -58,12 +58,12 @@ static struct rc_keymap tbs_nec_map = {
 
 static int __init init_rc_map_tbs_nec(void)
 {
-	return ir_register_map(&tbs_nec_map);
+	return rc_map_register(&tbs_nec_map);
 }
 
 static void __exit exit_rc_map_tbs_nec(void)
 {
-	ir_unregister_map(&tbs_nec_map);
+	rc_map_unregister(&tbs_nec_map);
 }
 
 module_init(init_rc_map_tbs_nec)
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
index 540020a7821b..bc38e34b9fda 100644
--- a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -66,7 +66,7 @@ static struct rc_map_table terratec_cinergy_xs[] = {
 	{ 0x5c, KEY_NEXT},
 };
 
-static struct rc_keymap terratec_cinergy_xs_map = {
+static struct rc_map_list terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(terratec_cinergy_xs),
@@ -77,12 +77,12 @@ static struct rc_keymap terratec_cinergy_xs_map = {
 
 static int __init init_rc_map_terratec_cinergy_xs(void)
 {
-	return ir_register_map(&terratec_cinergy_xs_map);
+	return rc_map_register(&terratec_cinergy_xs_map);
 }
 
 static void __exit exit_rc_map_terratec_cinergy_xs(void)
 {
-	ir_unregister_map(&terratec_cinergy_xs_map);
+	rc_map_unregister(&terratec_cinergy_xs_map);
 }
 
 module_init(init_rc_map_terratec_cinergy_xs)
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
index a1513f0299d2..1abafa5fd303 100644
--- a/drivers/media/rc/keymaps/rc-terratec-slim.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -53,7 +53,7 @@ static struct rc_map_table terratec_slim[] = {
 	{ 0x02bd45, KEY_POWER2 },          /* [red power button] */
 };
 
-static struct rc_keymap terratec_slim_map = {
+static struct rc_map_list terratec_slim_map = {
 	.map = {
 		.scan    = terratec_slim,
 		.size    = ARRAY_SIZE(terratec_slim),
@@ -64,12 +64,12 @@ static struct rc_keymap terratec_slim_map = {
 
 static int __init init_rc_map_terratec_slim(void)
 {
-	return ir_register_map(&terratec_slim_map);
+	return rc_map_register(&terratec_slim_map);
 }
 
 static void __exit exit_rc_map_terratec_slim(void)
 {
-	ir_unregister_map(&terratec_slim_map);
+	rc_map_unregister(&terratec_slim_map);
 }
 
 module_init(init_rc_map_terratec_slim)
diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
index 6b2fc431689e..ef5ba3f32735 100644
--- a/drivers/media/rc/keymaps/rc-tevii-nec.c
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -62,7 +62,7 @@ static struct rc_map_table tevii_nec[] = {
 	{ 0x58, KEY_SWITCHVIDEOMODE},
 };
 
-static struct rc_keymap tevii_nec_map = {
+static struct rc_map_list tevii_nec_map = {
 	.map = {
 		.scan    = tevii_nec,
 		.size    = ARRAY_SIZE(tevii_nec),
@@ -73,12 +73,12 @@ static struct rc_keymap tevii_nec_map = {
 
 static int __init init_rc_map_tevii_nec(void)
 {
-	return ir_register_map(&tevii_nec_map);
+	return rc_map_register(&tevii_nec_map);
 }
 
 static void __exit exit_rc_map_tevii_nec(void)
 {
-	ir_unregister_map(&tevii_nec_map);
+	rc_map_unregister(&tevii_nec_map);
 }
 
 module_init(init_rc_map_tevii_nec)
diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
index 61a4234f13af..20ac4e19fb3f 100644
--- a/drivers/media/rc/keymaps/rc-total-media-in-hand.c
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -59,7 +59,7 @@ static struct rc_map_table total_media_in_hand[] = {
 	{ 0x02bd45, KEY_INFO },            /* [red (I)] */
 };
 
-static struct rc_keymap total_media_in_hand_map = {
+static struct rc_map_list total_media_in_hand_map = {
 	.map = {
 		.scan    = total_media_in_hand,
 		.size    = ARRAY_SIZE(total_media_in_hand),
@@ -70,12 +70,12 @@ static struct rc_keymap total_media_in_hand_map = {
 
 static int __init init_rc_map_total_media_in_hand(void)
 {
-	return ir_register_map(&total_media_in_hand_map);
+	return rc_map_register(&total_media_in_hand_map);
 }
 
 static void __exit exit_rc_map_total_media_in_hand(void)
 {
-	ir_unregister_map(&total_media_in_hand_map);
+	rc_map_unregister(&total_media_in_hand_map);
 }
 
 module_init(init_rc_map_total_media_in_hand)
diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
index 2d7bbf8ae83e..f8190ead2e32 100644
--- a/drivers/media/rc/keymaps/rc-trekstor.c
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -54,7 +54,7 @@ static struct rc_map_table trekstor[] = {
 	{ 0x009f, KEY_LEFT },            /* Left */
 };
 
-static struct rc_keymap trekstor_map = {
+static struct rc_map_list trekstor_map = {
 	.map = {
 		.scan    = trekstor,
 		.size    = ARRAY_SIZE(trekstor),
@@ -65,12 +65,12 @@ static struct rc_keymap trekstor_map = {
 
 static int __init init_rc_map_trekstor(void)
 {
-	return ir_register_map(&trekstor_map);
+	return rc_map_register(&trekstor_map);
 }
 
 static void __exit exit_rc_map_trekstor(void)
 {
-	ir_unregister_map(&trekstor_map);
+	rc_map_unregister(&trekstor_map);
 }
 
 module_init(init_rc_map_trekstor)
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
index f3fe9f39d069..bb194879a794 100644
--- a/drivers/media/rc/keymaps/rc-tt-1500.c
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -56,7 +56,7 @@ static struct rc_map_table tt_1500[] = {
 	{ 0x3f, KEY_FORWARD },
 };
 
-static struct rc_keymap tt_1500_map = {
+static struct rc_map_list tt_1500_map = {
 	.map = {
 		.scan    = tt_1500,
 		.size    = ARRAY_SIZE(tt_1500),
@@ -67,12 +67,12 @@ static struct rc_keymap tt_1500_map = {
 
 static int __init init_rc_map_tt_1500(void)
 {
-	return ir_register_map(&tt_1500_map);
+	return rc_map_register(&tt_1500_map);
 }
 
 static void __exit exit_rc_map_tt_1500(void)
 {
-	ir_unregister_map(&tt_1500_map);
+	rc_map_unregister(&tt_1500_map);
 }
 
 module_init(init_rc_map_tt_1500)
diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
index 67cc6e0b326b..8bf8df64b081 100644
--- a/drivers/media/rc/keymaps/rc-twinhan1027.c
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -61,7 +61,7 @@ static struct rc_map_table twinhan_vp1027[] = {
 	{ 0x5f, KEY_BLUE },
 };
 
-static struct rc_keymap twinhan_vp1027_map = {
+static struct rc_map_list twinhan_vp1027_map = {
 	.map = {
 		.scan    = twinhan_vp1027,
 		.size    = ARRAY_SIZE(twinhan_vp1027),
@@ -72,12 +72,12 @@ static struct rc_keymap twinhan_vp1027_map = {
 
 static int __init init_rc_map_twinhan_vp1027(void)
 {
-	return ir_register_map(&twinhan_vp1027_map);
+	return rc_map_register(&twinhan_vp1027_map);
 }
 
 static void __exit exit_rc_map_twinhan_vp1027(void)
 {
-	ir_unregister_map(&twinhan_vp1027_map);
+	rc_map_unregister(&twinhan_vp1027_map);
 }
 
 module_init(init_rc_map_twinhan_vp1027)
diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
index f8a0d107001e..9e474a6024e5 100644
--- a/drivers/media/rc/keymaps/rc-videomate-s350.c
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -59,7 +59,7 @@ static struct rc_map_table videomate_s350[] = {
 	{ 0x20, KEY_TEXT},
 };
 
-static struct rc_keymap videomate_s350_map = {
+static struct rc_map_list videomate_s350_map = {
 	.map = {
 		.scan    = videomate_s350,
 		.size    = ARRAY_SIZE(videomate_s350),
@@ -70,12 +70,12 @@ static struct rc_keymap videomate_s350_map = {
 
 static int __init init_rc_map_videomate_s350(void)
 {
-	return ir_register_map(&videomate_s350_map);
+	return rc_map_register(&videomate_s350_map);
 }
 
 static void __exit exit_rc_map_videomate_s350(void)
 {
-	ir_unregister_map(&videomate_s350_map);
+	rc_map_unregister(&videomate_s350_map);
 }
 
 module_init(init_rc_map_videomate_s350)
diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
index 04d102457ea6..5f2a46e1f8f6 100644
--- a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -61,7 +61,7 @@ static struct rc_map_table videomate_tv_pvr[] = {
 	{ 0x21, KEY_SLEEP },
 };
 
-static struct rc_keymap videomate_tv_pvr_map = {
+static struct rc_map_list videomate_tv_pvr_map = {
 	.map = {
 		.scan    = videomate_tv_pvr,
 		.size    = ARRAY_SIZE(videomate_tv_pvr),
@@ -72,12 +72,12 @@ static struct rc_keymap videomate_tv_pvr_map = {
 
 static int __init init_rc_map_videomate_tv_pvr(void)
 {
-	return ir_register_map(&videomate_tv_pvr_map);
+	return rc_map_register(&videomate_tv_pvr_map);
 }
 
 static void __exit exit_rc_map_videomate_tv_pvr(void)
 {
-	ir_unregister_map(&videomate_tv_pvr_map);
+	rc_map_unregister(&videomate_tv_pvr_map);
 }
 
 module_init(init_rc_map_videomate_tv_pvr)
diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
index 78fc7da4b9e2..bd8d021f40aa 100644
--- a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -56,7 +56,7 @@ static struct rc_map_table winfast_usbii_deluxe[] = {
 
 };
 
-static struct rc_keymap winfast_usbii_deluxe_map = {
+static struct rc_map_list winfast_usbii_deluxe_map = {
 	.map = {
 		.scan    = winfast_usbii_deluxe,
 		.size    = ARRAY_SIZE(winfast_usbii_deluxe),
@@ -67,12 +67,12 @@ static struct rc_keymap winfast_usbii_deluxe_map = {
 
 static int __init init_rc_map_winfast_usbii_deluxe(void)
 {
-	return ir_register_map(&winfast_usbii_deluxe_map);
+	return rc_map_register(&winfast_usbii_deluxe_map);
 }
 
 static void __exit exit_rc_map_winfast_usbii_deluxe(void)
 {
-	ir_unregister_map(&winfast_usbii_deluxe_map);
+	rc_map_unregister(&winfast_usbii_deluxe_map);
 }
 
 module_init(init_rc_map_winfast_usbii_deluxe)
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index a8fbd7662d39..2747db43b70c 100644
--- a/drivers/media/rc/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -76,7 +76,7 @@ static struct rc_map_table winfast[] = {
 	{ 0x3f, KEY_F24 }		/* MCE -CH,  on Y04G0033 */
 };
 
-static struct rc_keymap winfast_map = {
+static struct rc_map_list winfast_map = {
 	.map = {
 		.scan    = winfast,
 		.size    = ARRAY_SIZE(winfast),
@@ -87,12 +87,12 @@ static struct rc_keymap winfast_map = {
 
 static int __init init_rc_map_winfast(void)
 {
-	return ir_register_map(&winfast_map);
+	return rc_map_register(&winfast_map);
 }
 
 static void __exit exit_rc_map_winfast(void)
 {
-	ir_unregister_map(&winfast_map);
+	rc_map_unregister(&winfast_map);
 }
 
 module_init(init_rc_map_winfast)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index b989f5d98d5f..0b0524c29325 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -31,9 +31,9 @@
 static LIST_HEAD(rc_map_list);
 static DEFINE_SPINLOCK(rc_map_lock);
 
-static struct rc_keymap *seek_rc_map(const char *name)
+static struct rc_map_list *seek_rc_map(const char *name)
 {
-	struct rc_keymap *map = NULL;
+	struct rc_map_list *map = NULL;
 
 	spin_lock(&rc_map_lock);
 	list_for_each_entry(map, &rc_map_list, list) {
@@ -47,10 +47,10 @@ static struct rc_keymap *seek_rc_map(const char *name)
 	return NULL;
 }
 
-struct rc_map *get_rc_map(const char *name)
+struct rc_map *rc_map_get(const char *name)
 {
 
-	struct rc_keymap *map;
+	struct rc_map_list *map;
 
 	map = seek_rc_map(name);
 #ifdef MODULE
@@ -74,31 +74,31 @@ struct rc_map *get_rc_map(const char *name)
 
 	return &map->map;
 }
-EXPORT_SYMBOL_GPL(get_rc_map);
+EXPORT_SYMBOL_GPL(rc_map_get);
 
-int ir_register_map(struct rc_keymap *map)
+int rc_map_register(struct rc_map_list *map)
 {
 	spin_lock(&rc_map_lock);
 	list_add_tail(&map->list, &rc_map_list);
 	spin_unlock(&rc_map_lock);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ir_register_map);
+EXPORT_SYMBOL_GPL(rc_map_register);
 
-void ir_unregister_map(struct rc_keymap *map)
+void rc_map_unregister(struct rc_map_list *map)
 {
 	spin_lock(&rc_map_lock);
 	list_del(&map->list);
 	spin_unlock(&rc_map_lock);
 }
-EXPORT_SYMBOL_GPL(ir_unregister_map);
+EXPORT_SYMBOL_GPL(rc_map_unregister);
 
 
 static struct rc_map_table empty[] = {
 	{ 0x2a, KEY_COFFEE },
 };
 
-static struct rc_keymap empty_map = {
+static struct rc_map_list empty_map = {
 	.map = {
 		.scan    = empty,
 		.size    = ARRAY_SIZE(empty),
@@ -996,9 +996,9 @@ int rc_register_device(struct rc_dev *dev)
 	if (!dev || !dev->map_name)
 		return -EINVAL;
 
-	rc_map = get_rc_map(dev->map_name);
+	rc_map = rc_map_get(dev->map_name);
 	if (!rc_map)
-		rc_map = get_rc_map(RC_MAP_EMPTY);
+		rc_map = rc_map_get(RC_MAP_EMPTY);
 	if (!rc_map || !rc_map->scan || rc_map->size == 0)
 		return -EINVAL;
 
@@ -1113,7 +1113,7 @@ static int __init rc_core_init(void)
 
 	/* Initialize/load the decoders/keymap code that will be used */
 	ir_raw_init();
-	ir_register_map(&empty_map);
+	rc_map_register(&empty_map);
 
 	return 0;
 }
@@ -1121,7 +1121,7 @@ static int __init rc_core_init(void)
 static void __exit rc_core_exit(void)
 {
 	class_unregister(&ir_input_class);
-	ir_unregister_map(&empty_map);
+	rc_map_unregister(&empty_map);
 }
 
 module_init(rc_core_init);
-- 
cgit v1.2.3


From 03c9a806e30c3904e5b5702874eebc1a4f2082bd Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 17 Nov 2010 16:05:05 -0300
Subject: [media] rc: Rename IR raw interface to ir-raw.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Makefile |   2 +-
 drivers/media/rc/ir-raw.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/media/rc/rc-raw.c | 371 ----------------------------------------------
 3 files changed, 372 insertions(+), 372 deletions(-)
 create mode 100644 drivers/media/rc/ir-raw.c
 delete mode 100644 drivers/media/rc/rc-raw.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 21251ba55904..78ac8c5c8adc 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,4 +1,4 @@
-rc-core-objs	:= rc-main.o rc-raw.o
+rc-core-objs	:= rc-main.o ir-raw.o
 
 obj-y += keymaps/
 
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
new file mode 100644
index 000000000000..165412fd240e
--- /dev/null
+++ b/drivers/media/rc/ir-raw.c
@@ -0,0 +1,371 @@
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include "rc-core-priv.h"
+
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE      512
+
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
+/* Used to handle IR raw handler extensions */
+static DEFINE_MUTEX(ir_raw_handler_lock);
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
+
+#ifdef MODULE
+/* Used to load the decoders */
+static struct work_struct wq_load;
+#endif
+
+static int ir_raw_event_thread(void *data)
+{
+	struct ir_raw_event ev;
+	struct ir_raw_handler *handler;
+	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+	int retval;
+
+	while (!kthread_should_stop()) {
+
+		spin_lock_irq(&raw->lock);
+		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+
+		if (!retval) {
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			if (kthread_should_stop())
+				set_current_state(TASK_RUNNING);
+
+			spin_unlock_irq(&raw->lock);
+			schedule();
+			continue;
+		}
+
+		spin_unlock_irq(&raw->lock);
+
+
+		BUG_ON(retval != sizeof(ev));
+
+		mutex_lock(&ir_raw_handler_lock);
+		list_for_each_entry(handler, &ir_raw_handler_list, list)
+			handler->decode(raw->dev, ev);
+		raw->prev_ev = ev;
+		mutex_unlock(&ir_raw_handler_lock);
+	}
+
+	return 0;
+}
+
+/**
+ * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
+ * @dev:	the struct rc_dev device descriptor
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This routine (which may be called from an interrupt context) stores a
+ * pulse/space duration for the raw ir decoding state machines. Pulses are
+ * signalled as positive values and spaces as negative values. A zero value
+ * will reset the decoding state machines.
+ */
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
+{
+	if (!dev->raw)
+		return -EINVAL;
+
+	IR_dprintk(2, "sample: (%05dus %s)\n",
+		   TO_US(ev->duration), TO_STR(ev->pulse));
+
+	if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store);
+
+/**
+ * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
+ * @dev:	the struct rc_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines. This is used by
+ * hardware which does not provide durations directly but only interrupts
+ * (or similar events) on state change.
+ */
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
+{
+	ktime_t			now;
+	s64			delta; /* ns */
+	struct ir_raw_event	ev;
+	int			rc = 0;
+
+	if (!dev->raw)
+		return -EINVAL;
+
+	now = ktime_get();
+	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
+
+	/* Check for a long duration since last event or if we're
+	 * being called for the first time, note that delta can't
+	 * possibly be negative.
+	 */
+	ev.duration = 0;
+	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
+		type |= IR_START_EVENT;
+	else
+		ev.duration = delta;
+
+	if (type & IR_START_EVENT)
+		ir_raw_event_reset(dev);
+	else if (dev->raw->last_type & IR_SPACE) {
+		ev.pulse = false;
+		rc = ir_raw_event_store(dev, &ev);
+	} else if (dev->raw->last_type & IR_PULSE) {
+		ev.pulse = true;
+		rc = ir_raw_event_store(dev, &ev);
+	} else
+		return 0;
+
+	dev->raw->last_event = now;
+	dev->raw->last_type = type;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @dev:	the struct rc_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
+{
+	if (!dev->raw)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (dev->idle && !ev->pulse)
+		return 0;
+	else if (dev->idle)
+		ir_raw_event_set_idle(dev, false);
+
+	if (!dev->raw->this_ev.duration)
+		dev->raw->this_ev = *ev;
+	else if (ev->pulse == dev->raw->this_ev.pulse)
+		dev->raw->this_ev.duration += ev->duration;
+	else {
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		dev->raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && dev->timeout &&
+	    dev->raw->this_ev.duration >= dev->timeout)
+		ir_raw_event_set_idle(dev, true);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+/**
+ * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not
+ * @dev:	the struct rc_dev device descriptor
+ * @idle:	whether the device is idle or not
+ */
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
+{
+	if (!dev->raw)
+		return;
+
+	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
+
+	if (idle) {
+		dev->raw->this_ev.timeout = true;
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		init_ir_raw_event(&dev->raw->this_ev);
+	}
+
+	if (dev->s_idle)
+		dev->s_idle(dev, idle);
+
+	dev->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
+ * ir_raw_event_handle() - schedules the decoding of stored ir data
+ * @dev:	the struct rc_dev device descriptor
+ *
+ * This routine will tell rc-core to start decoding stored ir data.
+ */
+void ir_raw_event_handle(struct rc_dev *dev)
+{
+	unsigned long flags;
+
+	if (!dev->raw)
+		return;
+
+	spin_lock_irqsave(&dev->raw->lock, flags);
+	wake_up_process(dev->raw->thread);
+	spin_unlock_irqrestore(&dev->raw->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_handle);
+
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+	u64 protocols;
+	mutex_lock(&ir_raw_handler_lock);
+	protocols = available_protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+	return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct rc_dev *dev)
+{
+	int rc;
+	struct ir_raw_handler *handler;
+
+	if (!dev)
+		return -EINVAL;
+
+	dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
+	if (!dev->raw)
+		return -ENOMEM;
+
+	dev->raw->dev = dev;
+	dev->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&dev->raw->kfifo,
+			 sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
+			 GFP_KERNEL);
+	if (rc < 0)
+		goto out;
+
+	spin_lock_init(&dev->raw->lock);
+	dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
+				       "rc%ld", dev->devno);
+
+	if (IS_ERR(dev->raw->thread)) {
+		rc = PTR_ERR(dev->raw->thread);
+		goto out;
+	}
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&dev->raw->list, &ir_raw_client_list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_register)
+			handler->raw_register(dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+
+out:
+	kfree(dev->raw);
+	dev->raw = NULL;
+	return rc;
+}
+
+void ir_raw_event_unregister(struct rc_dev *dev)
+{
+	struct ir_raw_handler *handler;
+
+	if (!dev || !dev->raw)
+		return;
+
+	kthread_stop(dev->raw->thread);
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&dev->raw->list);
+	list_for_each_entry(handler, &ir_raw_handler_list, list)
+		if (handler->raw_unregister)
+			handler->raw_unregister(dev);
+	mutex_unlock(&ir_raw_handler_lock);
+
+	kfifo_free(&dev->raw->kfifo);
+	kfree(dev->raw);
+	dev->raw = NULL;
+}
+
+/*
+ * Extension interface - used to register the IR decoders
+ */
+
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+	if (ir_raw_handler->raw_register)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_register(raw->dev);
+	available_protocols |= ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ir_raw_handler_register);
+
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
+{
+	struct ir_raw_event_ctrl *raw;
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_del(&ir_raw_handler->list);
+	if (ir_raw_handler->raw_unregister)
+		list_for_each_entry(raw, &ir_raw_client_list, list)
+			ir_raw_handler->raw_unregister(raw->dev);
+	available_protocols &= ~ir_raw_handler->protocols;
+	mutex_unlock(&ir_raw_handler_lock);
+}
+EXPORT_SYMBOL(ir_raw_handler_unregister);
+
+#ifdef MODULE
+static void init_decoders(struct work_struct *work)
+{
+	/* Load the decoder modules */
+
+	load_nec_decode();
+	load_rc5_decode();
+	load_rc6_decode();
+	load_jvc_decode();
+	load_sony_decode();
+	load_lirc_codec();
+
+	/* If needed, we may later add some init code. In this case,
+	   it is needed to change the CONFIG_MODULE test at rc-core.h
+	 */
+}
+#endif
+
+void ir_raw_init(void)
+{
+#ifdef MODULE
+	INIT_WORK(&wq_load, init_decoders);
+	schedule_work(&wq_load);
+#endif
+}
diff --git a/drivers/media/rc/rc-raw.c b/drivers/media/rc/rc-raw.c
deleted file mode 100644
index 165412fd240e..000000000000
--- a/drivers/media/rc/rc-raw.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/kthread.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/freezer.h>
-#include "rc-core-priv.h"
-
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE      512
-
-/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
-static LIST_HEAD(ir_raw_client_list);
-
-/* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
-static LIST_HEAD(ir_raw_handler_list);
-static u64 available_protocols;
-
-#ifdef MODULE
-/* Used to load the decoders */
-static struct work_struct wq_load;
-#endif
-
-static int ir_raw_event_thread(void *data)
-{
-	struct ir_raw_event ev;
-	struct ir_raw_handler *handler;
-	struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
-	int retval;
-
-	while (!kthread_should_stop()) {
-
-		spin_lock_irq(&raw->lock);
-		retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
-
-		if (!retval) {
-			set_current_state(TASK_INTERRUPTIBLE);
-
-			if (kthread_should_stop())
-				set_current_state(TASK_RUNNING);
-
-			spin_unlock_irq(&raw->lock);
-			schedule();
-			continue;
-		}
-
-		spin_unlock_irq(&raw->lock);
-
-
-		BUG_ON(retval != sizeof(ev));
-
-		mutex_lock(&ir_raw_handler_lock);
-		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->dev, ev);
-		raw->prev_ev = ev;
-		mutex_unlock(&ir_raw_handler_lock);
-	}
-
-	return 0;
-}
-
-/**
- * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @dev:	the struct rc_dev device descriptor
- * @ev:		the struct ir_raw_event descriptor of the pulse/space
- *
- * This routine (which may be called from an interrupt context) stores a
- * pulse/space duration for the raw ir decoding state machines. Pulses are
- * signalled as positive values and spaces as negative values. A zero value
- * will reset the decoding state machines.
- */
-int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
-{
-	if (!dev->raw)
-		return -EINVAL;
-
-	IR_dprintk(2, "sample: (%05dus %s)\n",
-		   TO_US(ev->duration), TO_STR(ev->pulse));
-
-	if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
-		return -ENOMEM;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store);
-
-/**
- * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @dev:	the struct rc_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) is used to
- * store the beginning of an ir pulse or space (or the start/end of ir
- * reception) for the raw ir decoding state machines. This is used by
- * hardware which does not provide durations directly but only interrupts
- * (or similar events) on state change.
- */
-int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
-{
-	ktime_t			now;
-	s64			delta; /* ns */
-	struct ir_raw_event	ev;
-	int			rc = 0;
-
-	if (!dev->raw)
-		return -EINVAL;
-
-	now = ktime_get();
-	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
-
-	/* Check for a long duration since last event or if we're
-	 * being called for the first time, note that delta can't
-	 * possibly be negative.
-	 */
-	ev.duration = 0;
-	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
-		type |= IR_START_EVENT;
-	else
-		ev.duration = delta;
-
-	if (type & IR_START_EVENT)
-		ir_raw_event_reset(dev);
-	else if (dev->raw->last_type & IR_SPACE) {
-		ev.pulse = false;
-		rc = ir_raw_event_store(dev, &ev);
-	} else if (dev->raw->last_type & IR_PULSE) {
-		ev.pulse = true;
-		rc = ir_raw_event_store(dev, &ev);
-	} else
-		return 0;
-
-	dev->raw->last_event = now;
-	dev->raw->last_type = type;
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
-
-/**
- * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @dev:	the struct rc_dev device descriptor
- * @type:	the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
- * This routine is intended for devices with limited internal buffer
- * It automerges samples of same type, and handles timeouts
- */
-int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
-{
-	if (!dev->raw)
-		return -EINVAL;
-
-	/* Ignore spaces in idle mode */
-	if (dev->idle && !ev->pulse)
-		return 0;
-	else if (dev->idle)
-		ir_raw_event_set_idle(dev, false);
-
-	if (!dev->raw->this_ev.duration)
-		dev->raw->this_ev = *ev;
-	else if (ev->pulse == dev->raw->this_ev.pulse)
-		dev->raw->this_ev.duration += ev->duration;
-	else {
-		ir_raw_event_store(dev, &dev->raw->this_ev);
-		dev->raw->this_ev = *ev;
-	}
-
-	/* Enter idle mode if nessesary */
-	if (!ev->pulse && dev->timeout &&
-	    dev->raw->this_ev.duration >= dev->timeout)
-		ir_raw_event_set_idle(dev, true);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
-
-/**
- * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not
- * @dev:	the struct rc_dev device descriptor
- * @idle:	whether the device is idle or not
- */
-void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
-{
-	if (!dev->raw)
-		return;
-
-	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
-
-	if (idle) {
-		dev->raw->this_ev.timeout = true;
-		ir_raw_event_store(dev, &dev->raw->this_ev);
-		init_ir_raw_event(&dev->raw->this_ev);
-	}
-
-	if (dev->s_idle)
-		dev->s_idle(dev, idle);
-
-	dev->idle = idle;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
-
-/**
- * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @dev:	the struct rc_dev device descriptor
- *
- * This routine will tell rc-core to start decoding stored ir data.
- */
-void ir_raw_event_handle(struct rc_dev *dev)
-{
-	unsigned long flags;
-
-	if (!dev->raw)
-		return;
-
-	spin_lock_irqsave(&dev->raw->lock, flags);
-	wake_up_process(dev->raw->thread);
-	spin_unlock_irqrestore(&dev->raw->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_handle);
-
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_allowed_protocols()
-{
-	u64 protocols;
-	mutex_lock(&ir_raw_handler_lock);
-	protocols = available_protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-	return protocols;
-}
-
-/*
- * Used to (un)register raw event clients
- */
-int ir_raw_event_register(struct rc_dev *dev)
-{
-	int rc;
-	struct ir_raw_handler *handler;
-
-	if (!dev)
-		return -EINVAL;
-
-	dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
-	if (!dev->raw)
-		return -ENOMEM;
-
-	dev->raw->dev = dev;
-	dev->raw->enabled_protocols = ~0;
-	rc = kfifo_alloc(&dev->raw->kfifo,
-			 sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
-			 GFP_KERNEL);
-	if (rc < 0)
-		goto out;
-
-	spin_lock_init(&dev->raw->lock);
-	dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
-				       "rc%ld", dev->devno);
-
-	if (IS_ERR(dev->raw->thread)) {
-		rc = PTR_ERR(dev->raw->thread);
-		goto out;
-	}
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&dev->raw->list, &ir_raw_client_list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_register)
-			handler->raw_register(dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-
-out:
-	kfree(dev->raw);
-	dev->raw = NULL;
-	return rc;
-}
-
-void ir_raw_event_unregister(struct rc_dev *dev)
-{
-	struct ir_raw_handler *handler;
-
-	if (!dev || !dev->raw)
-		return;
-
-	kthread_stop(dev->raw->thread);
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&dev->raw->list);
-	list_for_each_entry(handler, &ir_raw_handler_list, list)
-		if (handler->raw_unregister)
-			handler->raw_unregister(dev);
-	mutex_unlock(&ir_raw_handler_lock);
-
-	kfifo_free(&dev->raw->kfifo);
-	kfree(dev->raw);
-	dev->raw = NULL;
-}
-
-/*
- * Extension interface - used to register the IR decoders
- */
-
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
-	if (ir_raw_handler->raw_register)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_register(raw->dev);
-	available_protocols |= ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(ir_raw_handler_register);
-
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
-{
-	struct ir_raw_event_ctrl *raw;
-
-	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir_raw_handler->list);
-	if (ir_raw_handler->raw_unregister)
-		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_unregister(raw->dev);
-	available_protocols &= ~ir_raw_handler->protocols;
-	mutex_unlock(&ir_raw_handler_lock);
-}
-EXPORT_SYMBOL(ir_raw_handler_unregister);
-
-#ifdef MODULE
-static void init_decoders(struct work_struct *work)
-{
-	/* Load the decoder modules */
-
-	load_nec_decode();
-	load_rc5_decode();
-	load_rc6_decode();
-	load_jvc_decode();
-	load_sony_decode();
-	load_lirc_codec();
-
-	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at rc-core.h
-	 */
-}
-#endif
-
-void ir_raw_init(void)
-{
-#ifdef MODULE
-	INIT_WORK(&wq_load, init_decoders);
-	schedule_work(&wq_load);
-#endif
-}
-- 
cgit v1.2.3


From a931910d3be6f63464befb2dde94ec58a6eaf5c1 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 22 Nov 2010 13:22:37 -0300
Subject: [media] stb6100: warning cleanup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/dvb/frontends/stb6100.c:120: warning: ‘stb6100_normalise_regs’ defined but not used

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/stb6100.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index db66248fed46..64673b8b64a2 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -117,7 +117,10 @@ static const struct stb6100_regmask stb6100_template[] = {
 	[STB6100_TEST3]		= { 0x00, 0xde },
 };
 
-static void stb6100_normalise_regs(u8 regs[])
+/*
+ * Currently unused. Some boards might need it in the future
+ */
+static inline void stb6100_normalise_regs(u8 regs[])
 {
 	int i;
 
-- 
cgit v1.2.3


From 3751e288bcf3d77652ef979edc0b3ea8b21d8b97 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 16 Nov 2010 11:39:25 -0300
Subject: [media] pwc: do not start isoc stream on /dev/video open

pwc was starting streaming on /dev/video# open rather then on STREAM_ON. Now
that the v4l1 compat code is removed from the pwc driver there is no reason
left to do this. So this patch changes the pwc driver to delay starting
the isoc stream (and thus using valuable usb bandwidth) until the application
does a STREAM_ON

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pwc/pwc-ctrl.c |  7 ++++-
 drivers/media/video/pwc/pwc-if.c   | 54 ++++++++++----------------------------
 drivers/media/video/pwc/pwc-v4l.c  | 13 ++++-----
 drivers/media/video/pwc/pwc.h      |  1 -
 4 files changed, 27 insertions(+), 48 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 6b8fbddc0747..1593f8deb810 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1386,11 +1386,16 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	{
 		ARG_DEF(int, qual)
 
+		if (pdev->iso_init) {
+			ret = -EBUSY;
+			break;
+		}
+
 		ARG_IN(qual)
 		if (ARGR(qual) < 0 || ARGR(qual) > 3)
 			ret = -EINVAL;
 		else
-			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
+			ret = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
 		if (ret >= 0)
 			pdev->vcompression = ARGR(qual);
 		break;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index b821065e3870..6f8b682b9245 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -966,36 +966,6 @@ void pwc_isoc_cleanup(struct pwc_device *pdev)
 	PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n");
 }
 
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot)
-{
-	int ret, start;
-
-	/* Stop isoc stuff */
-	pwc_isoc_cleanup(pdev);
-	/* Reset parameters */
-	pwc_reset_buffers(pdev);
-	/* Try to set video mode... */
-	start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot);
-	if (ret) {
-		PWC_DEBUG_FLOW("pwc_set_video_mode attempt 1 failed.\n");
-		/* That failed... restore old mode (we know that worked) */
-		start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
-		if (start) {
-			PWC_DEBUG_FLOW("pwc_set_video_mode attempt 2 failed.\n");
-		}
-	}
-	if (start == 0)
-	{
-		if (pwc_isoc_init(pdev) < 0)
-		{
-			PWC_WARNING("Failed to restart ISOC transfers in pwc_try_video_mode.\n");
-			ret = -EAGAIN; /* let's try again, who knows if it works a second time */
-		}
-	}
-	pdev->drop_frames++; /* try to avoid garbage during switch */
-	return ret; /* Return original error code */
-}
-
 /*********
  * sysfs
  *********/
@@ -1175,7 +1145,7 @@ static int pwc_video_open(struct file *file)
 	/* Set some defaults */
 	pdev->vsnapshot = 0;
 
-	/* Start iso pipe for video; first try the last used video size
+	/* Set video size, first try the last used video size
 	   (or the default one); if that fails try QCIF/10 or QSIF/10;
 	   it that fails too, give up.
 	 */
@@ -1202,15 +1172,6 @@ static int pwc_video_open(struct file *file)
 		return i;
 	}
 
-	i = pwc_isoc_init(pdev);
-	if (i) {
-		PWC_DEBUG_OPEN("Failed to init ISOC stuff = %d.\n", i);
-		pwc_isoc_cleanup(pdev);
-		pwc_free_buffers(pdev);
-		mutex_unlock(&pdev->modlock);
-		return i;
-	}
-
 	/* Initialize the webcam to sane value */
 	pwc_set_brightness(pdev, 0x7fff);
 	pwc_set_agc(pdev, 1, 0);
@@ -1325,6 +1286,11 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
 		goto err_out;
 	}
 
+	/* Start the stream (if not already started) */
+	rv = pwc_isoc_init(pdev);
+	if (rv)
+		goto err_out;
+
 	/* In case we're doing partial reads, we don't have to wait for a frame */
 	if (pdev->image_read_pos == 0) {
 		/* Do wait queueing according to the (doc)book */
@@ -1394,6 +1360,7 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
+	int ret;
 
 	if (vdev == NULL)
 		return -EFAULT;
@@ -1401,6 +1368,13 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 	if (pdev == NULL)
 		return -EFAULT;
 
+	/* Start the stream (if not already started) */
+	mutex_lock(&pdev->modlock);
+	ret = pwc_isoc_init(pdev);
+	mutex_unlock(&pdev->modlock);
+	if (ret)
+		return ret;
+
 	poll_wait(file, &pdev->frameq, wait);
 	if (pdev->error_status)
 		return POLLERR;
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index 7061a03f5cf1..2ef1668638f9 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -309,7 +309,10 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 	    pixelformat != V4L2_PIX_FMT_PWC2)
 		return -EINVAL;
 
-	PWC_DEBUG_IOCTL("Try to change format to: width=%d height=%d fps=%d "
+	if (pdev->iso_init)
+		return -EBUSY;
+
+	PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d "
 			"compression=%d snapshot=%d format=%c%c%c%c\n",
 			f->fmt.pix.width, f->fmt.pix.height, fps,
 			compression, snapshot,
@@ -318,14 +321,14 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 			(pixelformat>>16)&255,
 			(pixelformat>>24)&255);
 
-	ret = pwc_try_video_mode(pdev,
+	ret = pwc_set_video_mode(pdev,
 				 f->fmt.pix.width,
 				 f->fmt.pix.height,
 				 fps,
 				 compression,
 				 snapshot);
 
-	PWC_DEBUG_IOCTL("pwc_try_video_mode(), return=%d\n", ret);
+	PWC_DEBUG_IOCTL("pwc_set_video_mode(), return=%d\n", ret);
 
 	if (ret)
 		return ret;
@@ -882,9 +885,7 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 		case VIDIOC_STREAMON:
 		{
-			/* WARNING: pwc_try_video_mode() called pwc_isoc_init */
-			pwc_isoc_init(pdev);
-			return 0;
+			return pwc_isoc_init(pdev);
 		}
 
 		case VIDIOC_STREAMOFF:
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 36a9c83b5f5d..16bbc6df9b07 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -275,7 +275,6 @@ extern int pwc_trace;
 extern int pwc_mbufs;
 
 /** functions in pwc-if.c */
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot);
 int pwc_handle_frame(struct pwc_device *pdev);
 void pwc_next_image(struct pwc_device *pdev);
 int pwc_isoc_init(struct pwc_device *pdev);
-- 
cgit v1.2.3


From c7d18867c82657a97f0bdb90ba1151b251b6a29b Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 16 Nov 2010 12:26:00 -0300
Subject: [media] pwc: Also set alt setting to alt0 when no error occured

isoc_cleanup contains a check to not set the altsetting to alt0 when
the device was unplugged, but the check currently is buggy, and causes
the alt setting to only be set to 0 if an error occured while streaming.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pwc/pwc-if.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 6f8b682b9245..97319efc9948 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -957,7 +957,7 @@ void pwc_isoc_cleanup(struct pwc_device *pdev)
 	/* Stop camera, but only if we are sure the camera is still there (unplug
 	   is signalled by EPIPE)
 	 */
-	if (pdev->error_status && pdev->error_status != EPIPE) {
+	if (pdev->error_status != EPIPE) {
 		PWC_DEBUG_OPEN("Setting alternate interface 0.\n");
 		usb_set_interface(pdev->udev, 0, 0);
 	}
-- 
cgit v1.2.3


From 622d9f5d302e99dc7a06cb442e9d9ff2bb0f59b5 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 16 Nov 2010 12:32:09 -0300
Subject: [media] pwc: failure to submit an urb is a fatal error

Failure to submit an urb is a fatal error, make isoc_init return an
error when this happens rather then only log it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pwc/pwc-if.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 97319efc9948..bd1519a4ecb4 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -898,10 +898,13 @@ int pwc_isoc_init(struct pwc_device *pdev)
 	/* link */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
-		if (ret)
+		if (ret) {
 			PWC_ERROR("isoc_init() submit_urb %d failed with error %d\n", i, ret);
-		else
-			PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return ret;
+		}
+		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
 	}
 
 	/* All is done... */
-- 
cgit v1.2.3


From a29df8579ab2779605b181a38ac7fb99796666df Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:42:41 -0300
Subject: [media] saa7134: remove unused module parameter
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

ir_rc5_remote_gap is a leftover from ir-common, remove it.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index f3f4aff2761e..4fdc165663d1 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -41,9 +41,6 @@ static int pinnacle_remote;
 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
 
-static int ir_rc5_remote_gap = 885;
-module_param(ir_rc5_remote_gap, int, 0644);
-
 static unsigned int disable_other_ir;
 module_param(disable_other_ir, int, 0644);
 MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
-- 
cgit v1.2.3


From b0ddb0f364f926785f50a8cea8a399ba63e3c227 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:42:46 -0300
Subject: [media] saa7134: use full keycode for BeholdTV
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Using the full keycode for BeholdTV hardware makes another module
parameter unnecessary.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/rc-behold.c        | 70 ++++++++++++++---------------
 drivers/media/video/saa7134/saa7134-input.c | 19 +-------
 2 files changed, 37 insertions(+), 52 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index ae4d2354c7b9..0ee1f149364c 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -29,8 +29,8 @@ static struct rc_map_table behold[] = {
 	/*  0x1c            0x12  *
 	 *  TV/FM          POWER  *
 	 *                        */
-	{ 0x1c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
-	{ 0x12, KEY_POWER },
+	{ 0x6b861c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
+	{ 0x6b8612, KEY_POWER },
 
 	/*  0x01    0x02    0x03  *
 	 *   1       2       3    *
@@ -41,28 +41,28 @@ static struct rc_map_table behold[] = {
 	 *  0x07    0x08    0x09  *
 	 *   7       8       9    *
 	 *                        */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
+	{ 0x6b8601, KEY_1 },
+	{ 0x6b8602, KEY_2 },
+	{ 0x6b8603, KEY_3 },
+	{ 0x6b8604, KEY_4 },
+	{ 0x6b8605, KEY_5 },
+	{ 0x6b8606, KEY_6 },
+	{ 0x6b8607, KEY_7 },
+	{ 0x6b8608, KEY_8 },
+	{ 0x6b8609, KEY_9 },
 
 	/*  0x0a    0x00    0x17  *
 	 * RECALL    0      MODE  *
 	 *                        */
-	{ 0x0a, KEY_AGAIN },
-	{ 0x00, KEY_0 },
-	{ 0x17, KEY_MODE },
+	{ 0x6b860a, KEY_AGAIN },
+	{ 0x6b8600, KEY_0 },
+	{ 0x6b8617, KEY_MODE },
 
 	/*  0x14          0x10    *
 	 * ASPECT      FULLSCREEN *
 	 *                        */
-	{ 0x14, KEY_SCREEN },
-	{ 0x10, KEY_ZOOM },
+	{ 0x6b8614, KEY_SCREEN },
+	{ 0x6b8610, KEY_ZOOM },
 
 	/*          0x0b          *
 	 *           Up           *
@@ -73,17 +73,17 @@ static struct rc_map_table behold[] = {
 	 *         0x015          *
 	 *         Down           *
 	 *                        */
-	{ 0x0b, KEY_CHANNELUP },
-	{ 0x18, KEY_VOLUMEDOWN },
-	{ 0x16, KEY_OK },		/* XXX KEY_ENTER */
-	{ 0x0c, KEY_VOLUMEUP },
-	{ 0x15, KEY_CHANNELDOWN },
+	{ 0x6b860b, KEY_CHANNELUP },
+	{ 0x6b8618, KEY_VOLUMEDOWN },
+	{ 0x6b8616, KEY_OK },		/* XXX KEY_ENTER */
+	{ 0x6b860c, KEY_VOLUMEUP },
+	{ 0x6b8615, KEY_CHANNELDOWN },
 
 	/*  0x11            0x0d  *
 	 *  MUTE            INFO  *
 	 *                        */
-	{ 0x11, KEY_MUTE },
-	{ 0x0d, KEY_INFO },
+	{ 0x6b8611, KEY_MUTE },
+	{ 0x6b860d, KEY_INFO },
 
 	/*  0x0f    0x1b    0x1a  *
 	 * RECORD PLAY/PAUSE STOP *
@@ -92,26 +92,26 @@ static struct rc_map_table behold[] = {
 	 *TELETEXT  AUDIO  SOURCE *
 	 *           RED   YELLOW *
 	 *                        */
-	{ 0x0f, KEY_RECORD },
-	{ 0x1b, KEY_PLAYPAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x0e, KEY_TEXT },
-	{ 0x1f, KEY_RED },	/*XXX KEY_AUDIO	*/
-	{ 0x1e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
+	{ 0x6b860f, KEY_RECORD },
+	{ 0x6b861b, KEY_PLAYPAUSE },
+	{ 0x6b861a, KEY_STOP },
+	{ 0x6b860e, KEY_TEXT },
+	{ 0x6b861f, KEY_RED },	/*XXX KEY_AUDIO	*/
+	{ 0x6b861e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
 
 	/*  0x1d   0x13     0x19  *
 	 * SLEEP  PREVIEW   DVB   *
 	 *         GREEN    BLUE  *
 	 *                        */
-	{ 0x1d, KEY_SLEEP },
-	{ 0x13, KEY_GREEN },
-	{ 0x19, KEY_BLUE },	/* XXX KEY_SAT	*/
+	{ 0x6b861d, KEY_SLEEP },
+	{ 0x6b8613, KEY_GREEN },
+	{ 0x6b8619, KEY_BLUE },	/* XXX KEY_SAT	*/
 
 	/*  0x58           0x5c   *
 	 * FREEZE        SNAPSHOT *
 	 *                        */
-	{ 0x58, KEY_SLOW },
-	{ 0x5c, KEY_CAMERA },
+	{ 0x6b8658, KEY_SLOW },
+	{ 0x6b865c, KEY_CAMERA },
 
 };
 
@@ -119,7 +119,7 @@ static struct rc_map_list behold_map = {
 	.map = {
 		.scan    = behold,
 		.size    = ARRAY_SIZE(behold),
-		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_BEHOLD,
 	}
 };
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 4fdc165663d1..10dc9ad2eae9 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -41,11 +41,6 @@ static int pinnacle_remote;
 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
 
-static unsigned int disable_other_ir;
-module_param(disable_other_ir, int, 0644);
-MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
-    "alternative remotes from other manufacturers");
-
 #define dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
@@ -282,22 +277,12 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
-	/* IR of this card normally decode signals NEC-standard from
-	 * - Sven IHOO MT 5.1R remote. xxyye718
-	 * - Sven DVD HD-10xx remote. xxyyf708
-	 * - BBK ...
-	 * - mayby others
-	 * So, skip not our, if disable full codes mode.
-	 */
-	if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir)
-		return 0;
 
-	/* Wrong data decode fix */
 	if (data[9] != (unsigned char)(~data[8]))
 		return 0;
 
-	*ir_key = data[9];
-	*ir_raw = data[9];
+	*ir_raw = ((data[10] << 16) | (data[11] << 8) | (data[9] << 0));
+	*ir_key = *ir_raw;
 
 	return 1;
 }
-- 
cgit v1.2.3


From 651c7a5f7f2f7277f8fc4fb38e89c79845ec9bf9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:42:51 -0300
Subject: [media] saa7134: some minor cleanups
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mostly using appropriate data types and constants (e.g. int -> bool).

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 49 +++++++++++------------------
 drivers/media/video/saa7134/saa7134.h       |  4 +--
 2 files changed, 21 insertions(+), 32 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 10dc9ad2eae9..d75c307981bc 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -407,17 +407,16 @@ static int __saa7134_ir_start(void *priv)
 	struct saa7134_dev *dev = priv;
 	struct saa7134_card_ir *ir;
 
-	if (!dev)
+	if (!dev || !dev->remote)
 		return -EINVAL;
 
 	ir  = dev->remote;
-	if (!ir)
-		return -EINVAL;
-
 	if (ir->running)
 		return 0;
 
 	ir->running = true;
+	ir->active = false;
+
 	if (ir->polling) {
 		setup_timer(&ir->timer, saa7134_input_timer,
 			    (unsigned long)dev);
@@ -425,10 +424,8 @@ static int __saa7134_ir_start(void *priv)
 		add_timer(&ir->timer);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_raw_decode_timer_end;
-		ir->timer_end.data = (unsigned long)dev;
-		ir->active = false;
+		setup_timer(&ir->timer_end, ir_raw_decode_timer_end,
+			    (unsigned long)dev);
 	}
 
 	return 0;
@@ -439,22 +436,19 @@ static void __saa7134_ir_stop(void *priv)
 	struct saa7134_dev *dev = priv;
 	struct saa7134_card_ir *ir;
 
-	if (!dev)
+	if (!dev || !dev->remote)
 		return;
 
 	ir  = dev->remote;
-	if (!ir)
-		return;
-
 	if (!ir->running)
 		return;
-	if (dev->remote->polling)
-		del_timer_sync(&dev->remote->timer);
-	else if (ir->raw_decode) {
+
+	if (ir->polling)
+		del_timer_sync(&ir->timer);
+	else if (ir->raw_decode)
 		del_timer_sync(&ir->timer_end);
-		ir->active = false;
-	}
 
+	ir->active = false;
 	ir->running = false;
 
 	return;
@@ -499,8 +493,8 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	u32 mask_keycode = 0;
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
-	int polling      = 0;
-	int raw_decode   = 0;
+	unsigned polling = 0;
+	bool raw_decode  = false;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -565,14 +559,14 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_M733A:
 		ir_codes     = RC_MAP_AVERMEDIA_M733A_RM_K6;
 		mask_keydown = 0x0040000;
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_777:
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
@@ -679,7 +673,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV:
 	case SAA7134_BOARD_ENCORE_ENLTV_FM:
@@ -693,7 +687,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_10MOONSTVMASTER3:
 		ir_codes     = RC_MAP_ENCORE_ENLTV;
@@ -746,8 +740,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	ir->dev = rc;
 	dev->remote = ir;
 
-	ir->running = false;
-
 	/* init hardware-specific stuff */
 	ir->mask_keycode = mask_keycode;
 	ir->mask_keydown = mask_keydown;
@@ -809,14 +801,12 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 {
 	struct i2c_board_info info;
-
 	struct i2c_msg msg_msi = {
 		.addr = 0x50,
 		.flags = I2C_M_RD,
 		.len = 0,
 		.buf = NULL,
 	};
-
 	int rc;
 
 	if (disable_ir) {
@@ -916,8 +906,8 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 {
-	struct saa7134_card_ir	*ir = dev->remote;
-	unsigned long 	timeout;
+	struct saa7134_card_ir *ir = dev->remote;
+	unsigned long timeout;
 	int space;
 
 	/* Generate initial event */
@@ -926,7 +916,6 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
 	ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE);
 
-
 	/*
 	 * Wait 15 ms from the start of the first IR event before processing
 	 * the event. This time is enough for NEC protocol. May need adjustments
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 1923f3ca0eab..f93951acec41 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -124,7 +124,7 @@ struct saa7134_card_ir {
 
 	char                    name[32];
 	char                    phys[32];
-	int                     users;
+	unsigned                users;
 
 	u32			polling;
         u32			last_gpio;
@@ -551,7 +551,7 @@ struct saa7134_dev {
 
 	/* infrared remote */
 	int                        has_remote;
-	struct saa7134_card_ir		   *remote;
+	struct saa7134_card_ir     *remote;
 
 	/* pci i/o */
 	char                       name[32];
-- 
cgit v1.2.3


From 7c8352d18ddbe37cff8ad71175a11739662ef899 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:42:57 -0300
Subject: [media] saa7134: merge saa7134_card_ir->timer and
 saa7134_card_ir->timer_end
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Both timers are used for a similar purpose. Merging them allows for some
minor simplifications.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 10 ++++------
 drivers/media/video/saa7134/saa7134.h       |  1 -
 2 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index d75c307981bc..98678d941847 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -420,11 +420,11 @@ static int __saa7134_ir_start(void *priv)
 	if (ir->polling) {
 		setup_timer(&ir->timer, saa7134_input_timer,
 			    (unsigned long)dev);
-		ir->timer.expires  = jiffies + HZ;
+		ir->timer.expires = jiffies + HZ;
 		add_timer(&ir->timer);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
-		setup_timer(&ir->timer_end, ir_raw_decode_timer_end,
+		setup_timer(&ir->timer, ir_raw_decode_timer_end,
 			    (unsigned long)dev);
 	}
 
@@ -443,10 +443,8 @@ static void __saa7134_ir_stop(void *priv)
 	if (!ir->running)
 		return;
 
-	if (ir->polling)
+	if (ir->polling || ir->raw_decode)
 		del_timer_sync(&ir->timer);
-	else if (ir->raw_decode)
-		del_timer_sync(&ir->timer_end);
 
 	ir->active = false;
 	ir->running = false;
@@ -923,7 +921,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	 */
 	if (!ir->active) {
 		timeout = jiffies + jiffies_to_msecs(15);
-		mod_timer(&ir->timer_end, timeout);
+		mod_timer(&ir->timer, timeout);
 		ir->active = true;
 	}
 
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index f93951acec41..babfbe7543eb 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -134,7 +134,6 @@ struct saa7134_card_ir {
 	bool			active;
 
 	struct timer_list       timer;
-	struct timer_list	timer_end;    /* timer_end for code completion */
 
 	/* IR core raw decoding */
 	u32                     raw_decode;
-- 
cgit v1.2.3


From edb4c25ca3a7997660500692eca3510eac9726e5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:43:12 -0300
Subject: [media] bttv: rename struct card_ir to bttv_ir
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

bttv_ir is more consistent with all other structs used in the same driver.
Also, clean up the struct to remove commented out members and the work_struct
which is unused.

[mchehab@redhat.com: fix a warning at bttv_rc5_timer_end]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-input.c | 27 +++++++++++++--------------
 drivers/media/video/bt8xx/bttvp.h      | 31 +++++++++----------------------
 2 files changed, 22 insertions(+), 36 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 773ee6a8eed4..c344b626e113 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -49,7 +49,7 @@ module_param(ir_rc5_remote_gap, int, 0644);
 
 static void ir_handle_key(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	u32 gpio,data;
 
 	/* read gpio value */
@@ -83,7 +83,7 @@ static void ir_handle_key(struct bttv *btv)
 
 static void ir_enltv_handle_key(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	u32 gpio, data, keyup;
 
 	/* read gpio value */
@@ -122,7 +122,7 @@ static void ir_enltv_handle_key(struct bttv *btv)
 
 void bttv_input_irq(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 
 	if (!ir->polling)
 		ir_handle_key(btv);
@@ -131,7 +131,7 @@ void bttv_input_irq(struct bttv *btv)
 static void bttv_input_timer(unsigned long data)
 {
 	struct bttv *btv = (struct bttv*)data;
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 
 	if (btv->c.type == BTTV_BOARD_ENLTV_FM_2)
 		ir_enltv_handle_key(btv);
@@ -185,9 +185,9 @@ static u32 bttv_rc5_decode(unsigned int code)
 	return rc5;
 }
 
-void bttv_rc5_timer_end(unsigned long data)
+static void bttv_rc5_timer_end(unsigned long data)
 {
-	struct card_ir *ir = (struct card_ir *)data;
+	struct bttv_ir *ir = (struct bttv_ir *)data;
 	struct timeval tv;
 	unsigned long current_jiffies;
 	u32 gap;
@@ -206,7 +206,7 @@ void bttv_rc5_timer_end(unsigned long data)
 	}
 
 	/* signal we're ready to start a new code */
-	ir->active = 0;
+	ir->active = false;
 
 	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
 	if (gap < 28000) {
@@ -242,7 +242,7 @@ void bttv_rc5_timer_end(unsigned long data)
 
 static int bttv_rc5_irq(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	struct timeval tv;
 	u32 gpio;
 	u32 gap;
@@ -278,7 +278,7 @@ static int bttv_rc5_irq(struct bttv *btv)
 		}
 		/* starting new code */
 	} else {
-		ir->active = 1;
+		ir->active = true;
 		ir->code = 0;
 		ir->base_time = tv;
 		ir->last_bit = 0;
@@ -295,7 +295,7 @@ static int bttv_rc5_irq(struct bttv *btv)
 
 /* ---------------------------------------------------------------------- */
 
-static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
+static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
 {
 	if (ir->polling) {
 		setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
@@ -303,9 +303,8 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 		add_timer(&ir->timer);
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = bttv_rc5_timer_end;
-		ir->timer_end.data = (unsigned long)ir;
+		setup_timer(&ir->timer_end, bttv_rc5_timer_end,
+			    (unsigned long)ir);
 		ir->shift_by = 1;
 		ir->start = 3;
 		ir->addr = 0x0;
@@ -409,7 +408,7 @@ int __devexit fini_bttv_i2c(struct bttv *btv)
 
 int bttv_input_init(struct bttv *btv)
 {
-	struct card_ir *ir;
+	struct bttv_ir *ir;
 	char *ir_codes = NULL;
 	struct rc_dev *rc;
 	int err = -ENOMEM;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index b71d04d12085..3d5b2bc1d376 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -120,15 +120,12 @@ struct bttv_format {
 	int  hshift,vshift;   /* for planar modes   */
 };
 
-struct card_ir {
+struct bttv_ir {
 	struct rc_dev           *dev;
 
 	char                    name[32];
 	char                    phys[32];
-#if 0
-	int                     users;
-	u32                     running:1;
-#endif
+
 	/* Usual gpio signalling */
 	u32                     mask_keycode;
 	u32                     mask_keydown;
@@ -139,25 +136,15 @@ struct card_ir {
 	int                     start; // What should RC5_START() be
 	int                     addr; // What RC5_ADDR() should be.
 	int                     rc5_remote_gap;
-	struct work_struct      work;
 	struct timer_list       timer;
 
 	/* RC5 gpio */
-	u32 rc5_gpio;
-	struct timer_list timer_end;    /* timer_end for code completion */
-	u32 last_bit;                   /* last raw bit seen */
-	u32 code;                       /* raw code under construction */
-	struct timeval base_time;       /* time of last seen code */
-	int active;                     /* building raw code */
-
-#if 0
-	/* NEC decoding */
-	u32                     nec_gpio;
-	struct tasklet_struct   tlet;
-
-	/* IR core raw decoding */
-	u32                     raw_decode;
-#endif
+	u32                     rc5_gpio;
+	struct timer_list       timer_end;  /* timer_end for code completion */
+	u32                     last_bit;   /* last raw bit seen */
+	u32                     code;       /* raw code under construction */
+	struct timeval          base_time;  /* time of last seen code */
+	bool                    active;     /* building raw code */
 };
 
 
@@ -408,7 +395,7 @@ struct bttv {
 
 	/* infrared remote */
 	int has_remote;
-	struct card_ir *remote;
+	struct bttv_ir *remote;
 
 	/* I2C remote data */
 	struct IR_i2c_init_data    init_data;
-- 
cgit v1.2.3


From 3938e0cfeb812e7b66f4e1cb6e34eb2e6864c6a2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:43:17 -0300
Subject: [media] bttv: merge ir decoding timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Similarly to saa7134, bttv_ir has two timers, only one of which is used
at a time and which serve the same purpose. Merge them.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-input.c | 8 +++-----
 drivers/media/video/bt8xx/bttvp.h      | 3 +--
 2 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index c344b626e113..989c0481e3b1 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -283,8 +283,7 @@ static int bttv_rc5_irq(struct bttv *btv)
 		ir->base_time = tv;
 		ir->last_bit = 0;
 
-		mod_timer(&ir->timer_end,
-			  current_jiffies + msecs_to_jiffies(30));
+		mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30));
 	}
 
 	/* toggle GPIO pin 4 to reset the irq */
@@ -303,8 +302,7 @@ static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
 		add_timer(&ir->timer);
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
-		setup_timer(&ir->timer_end, bttv_rc5_timer_end,
-			    (unsigned long)ir);
+		setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
 		ir->shift_by = 1;
 		ir->start = 3;
 		ir->addr = 0x0;
@@ -322,7 +320,7 @@ static void bttv_ir_stop(struct bttv *btv)
 	if (btv->remote->rc5_gpio) {
 		u32 gpio;
 
-		del_timer_sync(&btv->remote->timer_end);
+		del_timer_sync(&btv->remote->timer);
 		flush_scheduled_work();
 
 		gpio = bttv_gpio_read(&btv->c);
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 3d5b2bc1d376..071232045605 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -122,6 +122,7 @@ struct bttv_format {
 
 struct bttv_ir {
 	struct rc_dev           *dev;
+	struct timer_list       timer;
 
 	char                    name[32];
 	char                    phys[32];
@@ -136,11 +137,9 @@ struct bttv_ir {
 	int                     start; // What should RC5_START() be
 	int                     addr; // What RC5_ADDR() should be.
 	int                     rc5_remote_gap;
-	struct timer_list       timer;
 
 	/* RC5 gpio */
 	u32                     rc5_gpio;
-	struct timer_list       timer_end;  /* timer_end for code completion */
 	u32                     last_bit;   /* last raw bit seen */
 	u32                     code;       /* raw code under construction */
 	struct timeval          base_time;  /* time of last seen code */
-- 
cgit v1.2.3


From 829ba9fe34246f1f5e813b6bf84171d36e776734 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=83=C2=A4rdeman?= <david@hardeman.nu>
Date: Fri, 19 Nov 2010 20:43:27 -0300
Subject: [media] rc-core: fix some leftovers from the renaming patches
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix some minor comments etc which are leftover from the old naming scheme.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/ir-raw.c       | 2 +-
 drivers/media/rc/rc-core-priv.h | 6 +++---
 drivers/media/rc/rc-main.c      | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 165412fd240e..185baddcbf14 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -1,4 +1,4 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
+/* ir-raw.c - handle IR pulse/space events
  *
  * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
  *
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 48065b714d00..873b38789751 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -13,8 +13,8 @@
  *  GNU General Public License for more details.
  */
 
-#ifndef _IR_RAW_EVENT
-#define _IR_RAW_EVENT
+#ifndef _RC_CORE_PRIV
+#define _RC_CORE_PRIV
 
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -190,4 +190,4 @@ void ir_raw_init(void);
 #endif
 
 
-#endif /* _IR_RAW_EVENT */
+#endif /* _RC_CORE_PRIV */
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 0b0524c29325..6bdd0d3c02e8 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1,4 +1,4 @@
-/* rc-core.c - handle IR scancode->keycode tables
+/* rc-main.c - Remote Controller core module
  *
  * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
  *
-- 
cgit v1.2.3


From 0e835087dfe7db19f1f072046f5e116d4ec6662b Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Wed, 17 Nov 2010 02:13:39 -0300
Subject: [media] lirc_dev: add some __user annotations

Sparse complains because there are no __user annotations.

drivers/media/rc/lirc_dev.c:156:27: warning:
	incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/rc/lirc_dev.c:156:27:    expected int ( *read )( ... )
drivers/media/rc/lirc_dev.c:156:27:    got int ( extern [toplevel] *<noident> )( ... )

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/lirc_dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index 756656e17bdd..6b9fc74f2e1d 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -627,7 +627,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 EXPORT_SYMBOL(lirc_dev_fop_ioctl);
 
 ssize_t lirc_dev_fop_read(struct file *file,
-			  char *buffer,
+			  char __user *buffer,
 			  size_t length,
 			  loff_t *ppos)
 {
@@ -747,7 +747,7 @@ void *lirc_get_pdata(struct file *file)
 EXPORT_SYMBOL(lirc_get_pdata);
 
 
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
 			   size_t length, loff_t *ppos)
 {
 	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-- 
cgit v1.2.3


From eac8ae087ac66b21de94fee3e920210b43d43076 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Mariusz=20Bia=C5=82o=C5=84czyk?= <manio@skyboo.net>
Date: Mon, 15 Nov 2010 15:50:13 -0300
Subject: [media] Fix rc-tbs-nec table after converting the cx88 driver to
 ir-core
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The patch fixes the rc-tbs-nec table after converting
drivers/media/video/cx88 to ir-core
(commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec).

It is also adds two missing buttons (10- and 10+) with
its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN).

[mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer]
Signed-off-by: Mariusz Białończyk <manio@skyboo.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/rc-tbs-nec.c | 66 ++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 32 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
index 15b9a9b80767..7242ee66f6e0 100644
--- a/drivers/media/rc/keymaps/rc-tbs-nec.c
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -13,38 +13,40 @@
 #include <media/rc-map.h>
 
 static struct rc_map_table tbs_nec[] = {
-	{ 0x04, KEY_POWER2},	/*power*/
-	{ 0x14, KEY_MUTE},	/*mute*/
-	{ 0x07, KEY_1},
-	{ 0x06, KEY_2},
-	{ 0x05, KEY_3},
-	{ 0x0b, KEY_4},
-	{ 0x0a, KEY_5},
-	{ 0x09, KEY_6},
-	{ 0x0f, KEY_7},
-	{ 0x0e, KEY_8},
-	{ 0x0d, KEY_9},
-	{ 0x12, KEY_0},
-	{ 0x16, KEY_CHANNELUP},	/*ch+*/
-	{ 0x11, KEY_CHANNELDOWN},/*ch-*/
-	{ 0x13, KEY_VOLUMEUP},	/*vol+*/
-	{ 0x0c, KEY_VOLUMEDOWN},/*vol-*/
-	{ 0x03, KEY_RECORD},	/*rec*/
-	{ 0x18, KEY_PAUSE},	/*pause*/
-	{ 0x19, KEY_OK},	/*ok*/
-	{ 0x1a, KEY_CAMERA},	/* snapshot */
-	{ 0x01, KEY_UP},
-	{ 0x10, KEY_LEFT},
-	{ 0x02, KEY_RIGHT},
-	{ 0x08, KEY_DOWN},
-	{ 0x15, KEY_FAVORITES},
-	{ 0x17, KEY_SUBTITLE},
-	{ 0x1d, KEY_ZOOM},
-	{ 0x1f, KEY_EXIT},
-	{ 0x1e, KEY_MENU},
-	{ 0x1c, KEY_EPG},
-	{ 0x00, KEY_PREVIOUS},
-	{ 0x1b, KEY_MODE},
+	{ 0x84, KEY_POWER2},		/* power */
+	{ 0x94, KEY_MUTE},		/* mute */
+	{ 0x87, KEY_1},
+	{ 0x86, KEY_2},
+	{ 0x85, KEY_3},
+	{ 0x8b, KEY_4},
+	{ 0x8a, KEY_5},
+	{ 0x89, KEY_6},
+	{ 0x8f, KEY_7},
+	{ 0x8e, KEY_8},
+	{ 0x8d, KEY_9},
+	{ 0x92, KEY_0},
+	{ 0xc0, KEY_10CHANNELSUP},	/* 10+ */
+	{ 0xd0, KEY_10CHANNELSDOWN},	/* 10- */
+	{ 0x96, KEY_CHANNELUP},		/* ch+ */
+	{ 0x91, KEY_CHANNELDOWN},	/* ch- */
+	{ 0x93, KEY_VOLUMEUP},		/* vol+ */
+	{ 0x8c, KEY_VOLUMEDOWN},	/* vol- */
+	{ 0x83, KEY_RECORD},		/* rec */
+	{ 0x98, KEY_PAUSE},		/* pause, yellow */
+	{ 0x99, KEY_OK},		/* ok */
+	{ 0x9a, KEY_CAMERA},		/* snapshot */
+	{ 0x81, KEY_UP},
+	{ 0x90, KEY_LEFT},
+	{ 0x82, KEY_RIGHT},
+	{ 0x88, KEY_DOWN},
+	{ 0x95, KEY_FAVORITES},		/* blue */
+	{ 0x97, KEY_SUBTITLE},		/* green */
+	{ 0x9d, KEY_ZOOM},
+	{ 0x9f, KEY_EXIT},
+	{ 0x9e, KEY_MENU},
+	{ 0x9c, KEY_EPG},
+	{ 0x80, KEY_PREVIOUS},		/* red */
+	{ 0x9b, KEY_MODE},
 };
 
 static struct rc_map_list tbs_nec_map = {
-- 
cgit v1.2.3


From 97108cf682566a79ad49f165435bddbb91844d9a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 22 Nov 2010 15:50:51 -0300
Subject: [media] Fix parameter description for disable_ir

It seems that a wrong cut-and-paste error were done here.

Reported-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-cards.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 9b9e169cce90..7e0ee106e1d3 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -47,7 +47,7 @@ MODULE_PARM_DESC(latency,"pci latency timer");
 
 static int disable_ir;
 module_param(disable_ir, int, 0444);
-MODULE_PARM_DESC(latency, "Disable IR support");
+MODULE_PARM_DESC(disable_ir, "Disable IR support");
 
 #define info_printk(core, fmt, arg...) \
 	printk(KERN_INFO "%s: " fmt, core->name , ## arg)
-- 
cgit v1.2.3


From a363436396ad68509db4513c886055cc067a184c Mon Sep 17 00:00:00 2001
From: Alexey Chernov <4ernov@gmail.com>
Date: Thu, 28 Oct 2010 18:12:02 -0300
Subject: [media] Patch for cx18 module with added support of GoTView PCI DVD3
 Hybrid tuner

I've got code which adds support of GoTView PCI DVD3 Hybrid tuner in
cx18 module and Andy Walls in ivtv mailing-list gave me some advice on
making a patch and sending it here. So here's the patch against
staging/2.6.37-rc1 branch (the tutorial recommends to include it as
plain text but if it's the case I can surely send as an attachment):

Several comments on the patch:

1. Both users on the official Gotview forum and support said that PCI
DVD3 is very similar to Yuan MPC718 card so the main part of code is
taken from Yuan configuration. Some users reported it to work properly.

2. Everything is being initialized correctly including analog, dvb,
radio and alsa parts. Analogue part and alsa virtual card is tested by
myself using original Gotview card.

[mchehab@redhat.com: Whitespace cleanups]
Signed-off-by: Alexey Chernov <4ernov@gmail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-cards.c  | 63 +++++++++++++++++++++++++++++++++-
 drivers/media/video/cx18/cx18-driver.c |  2 ++
 drivers/media/video/cx18/cx18-driver.h |  4 ++-
 drivers/media/video/cx18/cx18-dvb.c    | 32 +++++++++++++++++
 4 files changed, 99 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index fe1090940b01..52ba913b5af8 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
 	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };
 
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
    This keeps the PCI ID database up to date. Note that the entries
    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
    New vendor IDs should still be added to the vendor ID list. */
@@ -251,6 +251,66 @@ static const struct cx18_card cx18_card_mpc718 = {
 
 /* ------------------------------------------------------------------------- */
 
+/* GoTView PCI */
+
+static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_gotview_dvd3 = {
+	.type = CX18_CARD_GOTVIEW_PCI_DVD3,
+	.name = "GoTView PCI DVD3 Hybrid",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+				CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x2,
+			      .radio  = 0x1 },
+	.xceive_pin = 0,
+	.pci_list = cx18_pci_gotview_dvd3,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
 /* Conexant Raptor PAL/SECAM: note that this card is analog only! */
 
 static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
@@ -463,6 +523,7 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
 	&cx18_card_leadtek_dvr3100h,
+	&cx18_card_gotview_dvd3
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index df60f27337cf..98ac2e935743 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -156,6 +156,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
 		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
 		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
+		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -333,6 +334,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
 		tveeprom_hauppauge_analog(&c, tv, eedata);
 		break;
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 		tv->model = 0x718;
 		cx18_eeprom_dump(cx, eedata, sizeof(eedata));
 		CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 77be58c1096b..cf4f20e91858 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -84,7 +84,8 @@
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
-#define CX18_CARD_LAST 		      7
+#define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
+#define CX18_CARD_LAST		      8
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
@@ -106,6 +107,7 @@
 #define CX18_PCI_ID_CONEXANT		0x14f1
 #define CX18_PCI_ID_TOSHIBA		0x1179
 #define CX18_PCI_ID_LEADTEK		0x107D
+#define CX18_PCI_ID_GOTVIEW		0x5854
 
 /* ======================================================================== */
 /* ========================== START USER SETTABLE DMA VARIABLES =========== */
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6d19f040d70f..c7f0bad39ad0 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -203,6 +203,14 @@ static struct zl10353_config yuan_mpc718_zl10353_demod = {
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+static struct zl10353_config gotview_dvd3_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -247,6 +255,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 
 	case CX18_CARD_LEADTEK_DVR3100H:
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -495,6 +504,29 @@ static int dvb_register(struct cx18_stream *stream)
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &gotview_dvd3_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
-- 
cgit v1.2.3


From b1dc614a81258eb7ff482892e7bc894f1089c144 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Nov 2010 00:04:28 -0300
Subject: [media] drivers/media/video: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-blackbird.c  | 2 +-
 drivers/media/video/davinci/vpfe_capture.c | 2 +-
 drivers/media/video/em28xx/em28xx-cards.c  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index d7c94848249e..bca307eb1e24 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1064,7 +1064,7 @@ static int mpeg_open(struct file *file)
 		err = drv->request_acquire(drv);
 		if(err != 0) {
 			dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err);
-			mutex_unlock(&dev->core->lock);;
+			mutex_unlock(&dev->core->lock);
 			return err;
 		}
 	}
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index 7333a9bb2549..353eadaa823e 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -1276,7 +1276,7 @@ static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
 		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
 		vb->field = field;
 
-		ret = videobuf_iolock(vq, vb, NULL);;
+		ret = videobuf_iolock(vq, vb, NULL);
 		if (ret < 0)
 			return ret;
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 24caa8512ba8..ed25c5579c33 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2438,7 +2438,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 		dev->init_data.get_key = em28xx_get_key_em_haup;
 		dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
 	case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
-		dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;;
+		dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
 		dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
 		dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
 		break;
-- 
cgit v1.2.3


From ecfc95eb7410c04c23f59b02931e8f8b3aa4a5b3 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 15 Nov 2010 17:13:54 -0300
Subject: [media] ngene-core.c: Remove unnecessary casts of pci_get_drvdata

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ngene/ngene-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index c7809f7da02e..be71f915e2a3 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -1515,7 +1515,7 @@ static int init_channels(struct ngene *dev)
 
 void __devexit ngene_remove(struct pci_dev *pdev)
 {
-	struct ngene *dev = (struct ngene *)pci_get_drvdata(pdev);
+	struct ngene *dev = pci_get_drvdata(pdev);
 	int i;
 
 	tasklet_kill(&dev->event_tasklet);
-- 
cgit v1.2.3


From 5df465df7bd9c352289ca63d4d9f78299be72c7d Mon Sep 17 00:00:00 2001
From: Nicolas Kaiser <nikai@nikai.net>
Date: Fri, 19 Nov 2010 17:42:40 -0300
Subject: [media] drivers/media: nuvoton: fix chip id probe v2

Make sure we have a matching chip id high and one or the other
of the chip id low values.
Print the values if the probe fails.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/nuvoton-cir.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 7fca6d1549ed..dd4caf8ef80b 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -248,9 +248,12 @@ static int nvt_hw_detect(struct nvt_dev *nvt)
 	chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
 	nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
 
-	if (chip_major != CHIP_ID_HIGH &&
-	    (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
+	if (chip_major != CHIP_ID_HIGH ||
+	    (chip_minor != CHIP_ID_LOW && chip_minor != CHIP_ID_LOW2)) {
+		nvt_pr(KERN_ERR, "%s: unsupported chip, id: 0x%02x 0x%02x",
+		       chip_id, chip_major, chip_minor);
 		ret = -ENODEV;
+	}
 
 	nvt_efm_disable(nvt);
 
-- 
cgit v1.2.3


From 5ad1a55542dd69d2c6aa7db5ca79073d693bbfed Mon Sep 17 00:00:00 2001
From: Paul Bender <pebender@gmail.com>
Date: Wed, 17 Nov 2010 16:56:17 -0300
Subject: [media] rc: fix sysfs entry for mceusb and streamzap

When trying to create persistent device names for mceusb and streamzap
devices, I noticed that their respective drivers are not creating the rc
device as a child of the USB device. Rather it creates it as virtual
device. As a result, udev cannot use the USB device information to
create persistent device names for event and lirc devices associated
with the rc device. Not having persistent device names makes it more

difficult to make use of the devices in userspace as their names can
change.

Forward-ported to media_tree staging/for_v2.6.38 and tested with
both streamzap and mceusb devices:
$ ll /dev/input/by-id/
...
lrwxrwxrwx. 1 root root 9 Nov 17 17:06 usb-Streamzap__Inc._Streamzap_Remote_Control-event-if00 -> ../event6
lrwxrwxrwx. 1 root root 9 Nov 17 17:05 usb-Topseed_Technology_Corp._eHome_Infrared_Transceiver_TS000BzY-event-if00 -> ../event5
Previously, nada.

Signed-off-by: Paul Bender <pebender@gmail.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/mceusb.c    | 2 +-
 drivers/media/rc/streamzap.c | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index c2cb58a0c6ed..0fef6efad537 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1047,7 +1047,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 
 	snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
 		 mceusb_model[ir->model].name ?
-		 	mceusb_model[ir->model].name :
+			mceusb_model[ir->model].name :
 			"Media Center Ed. eHome Infrared Remote Transceiver",
 		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
 		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 7814ec709bfc..7f82f55159da 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -316,6 +316,8 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 
 	rdev->input_name = sz->name;
 	rdev->input_phys = sz->phys;
+	usb_to_input_id(sz->usbdev, &rdev->input_id);
+	rdev->dev.parent = dev;
 	rdev->priv = sz;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
 	rdev->allowed_protos = RC_TYPE_ALL;
-- 
cgit v1.2.3


From 5ae094cea1b4f3715ee6ea4f49d0b36d564f90e7 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 18 Nov 2010 00:56:37 -0300
Subject: [media] cx231xx: stray unlock on error path

The lock isn't held here and doesn't need to be unlocked.  The code has
been like this since the driver was merged.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-cards.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 2b6101763355..61756502c085 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -784,7 +784,7 @@ static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev,
 	retval = cx231xx_register_analog_devices(dev);
 	if (retval < 0) {
 		cx231xx_release_resources(dev);
-		goto fail_reg_devices;
+		return retval;
 	}
 
 	cx231xx_ir_init(dev);
@@ -792,10 +792,6 @@ static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev,
 	cx231xx_init_extension(dev);
 
 	return 0;
-
-fail_reg_devices:
-	mutex_unlock(&dev->lock);
-	return retval;
 }
 
 #if defined(CONFIG_MODULES) && defined(MODULE)
-- 
cgit v1.2.3


From b7c7a4bed8d695933ae172031556de9de30ae598 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 28 Nov 2010 11:48:26 -0300
Subject: [media] bttv: remove custom_irq and gpioq from bttv struct

The RC5 old decoder used custom_irq to indicate the need of handling
the IRQ on a different way. Instead of doing it, let the core just call the
bttv input IRQ handler, and add the code there to call the legacy decoder.

While here, remove the gpioq waitqueue, as this is not used anywhere, and
add a debug msg to help removing the legacy RC5 code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-driver.c |  6 ------
 drivers/media/video/bt8xx/bttv-input.c  | 20 +++++++++++++-------
 drivers/media/video/bt8xx/bttvp.h       |  4 +---
 3 files changed, 14 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 0902ec041c7a..54fbab95b88c 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4041,9 +4041,6 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 
 	btv=(struct bttv *)dev_id;
 
-	if (btv->custom_irq)
-		handled = btv->custom_irq(btv);
-
 	count=0;
 	while (1) {
 		/* get/clear interrupt status bits */
@@ -4079,7 +4076,6 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 			btv->field_count++;
 
 		if ((astat & BT848_INT_GPINT) && btv->remote) {
-			wake_up(&btv->gpioq);
 			bttv_input_irq(btv);
 		}
 
@@ -4284,7 +4280,6 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 	mutex_init(&btv->lock);
 	spin_lock_init(&btv->s_lock);
 	spin_lock_init(&btv->gpio_lock);
-	init_waitqueue_head(&btv->gpioq);
 	init_waitqueue_head(&btv->i2c_queue);
 	INIT_LIST_HEAD(&btv->c.subs);
 	INIT_LIST_HEAD(&btv->capture);
@@ -4472,7 +4467,6 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev)
 
 	/* tell gpio modules we are leaving ... */
 	btv->shutdown=1;
-	wake_up(&btv->gpioq);
 	bttv_input_fini(btv);
 	bttv_sub_del_devices(&btv->c);
 
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 989c0481e3b1..7f48306133be 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -120,11 +120,15 @@ static void ir_enltv_handle_key(struct bttv *btv)
 	ir->last_gpio = data | keyup;
 }
 
+static int bttv_rc5_irq(struct bttv *btv);
+
 void bttv_input_irq(struct bttv *btv)
 {
 	struct bttv_ir *ir = btv->remote;
 
-	if (!ir->polling)
+	if (ir->rc5_gpio)
+		bttv_rc5_irq(btv);
+	else if (!ir->polling)
 		ir_handle_key(btv);
 }
 
@@ -251,10 +255,6 @@ static int bttv_rc5_irq(struct bttv *btv)
 	/* read gpio port */
 	gpio = bttv_gpio_read(&btv->c);
 
-	/* remote IRQ? */
-	if (!(gpio & 0x20))
-		return 0;
-
 	/* get time of bit */
 	current_jiffies = jiffies;
 	do_gettimeofday(&tv);
@@ -267,6 +267,13 @@ static int bttv_rc5_irq(struct bttv *btv)
 		    tv.tv_usec - ir->base_time.tv_usec;
 	}
 
+	dprintk(KERN_INFO DEVNAME ": RC5 IRQ: gap %d us for %s\n",
+		gap, (gpio & 0x20) ? "mark" : "space");
+
+	/* remote IRQ? */
+	if (!(gpio & 0x20))
+		return 0;
+
 	/* active code => add bit */
 	if (ir->active) {
 		/* only if in the code (otherwise spurious IRQ or timer
@@ -479,8 +486,7 @@ int bttv_input_init(struct bttv *btv)
 		break;
 	case BTTV_BOARD_NEBULA_DIGITV:
 		ir_codes = RC_MAP_NEBULA;
-		btv->custom_irq = bttv_rc5_irq;
-		ir->rc5_gpio = 1;
+		ir->rc5_gpio = true;
 		break;
 	case BTTV_BOARD_MACHTV_MAGICTV:
 		ir_codes         = RC_MAP_APAC_VIEWCOMP;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 071232045605..9b776faf0741 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -139,7 +139,7 @@ struct bttv_ir {
 	int                     rc5_remote_gap;
 
 	/* RC5 gpio */
-	u32                     rc5_gpio;
+	bool			rc5_gpio;   /* Is RC5 legacy GPIO enabled? */
 	u32                     last_bit;   /* last raw bit seen */
 	u32                     code;       /* raw code under construction */
 	struct timeval          base_time;  /* time of last seen code */
@@ -364,12 +364,10 @@ struct bttv {
 	struct bttv_pll_info pll;
 	int triton1;
 	int gpioirq;
-	int (*custom_irq)(struct bttv *btv);
 
 	int use_i2c_hw;
 
 	/* old gpio interface */
-	wait_queue_head_t gpioq;
 	int shutdown;
 
 	void (*volume_gpio)(struct bttv *btv, __u16 volume);
-- 
cgit v1.2.3


From dea8a39fb569c23084c857ccdbf70a95ea3bf7dc Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 29 Nov 2010 07:46:13 -0300
Subject: [media] rc-core: Initialize return value to zero

At ir_setkeycode, if INPUT_KEYMAP_BY_INDEX is used, the routine may return
an invalid value if not error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/rc-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 6bdd0d3c02e8..72be8a02118c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -325,7 +325,7 @@ static int ir_setkeycode(struct input_dev *idev,
 	struct rc_map *rc_map = &rdev->rc_map;
 	unsigned int index;
 	unsigned int scancode;
-	int retval;
+	int retval = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&rc_map->lock, flags);
-- 
cgit v1.2.3


From 801c73c04ad57689dc9b47baf62cbb23f954d987 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?David=20H=C3=A4rdeman?= <david@hardeman.nu>
Date: Thu, 25 Nov 2010 18:36:27 -0300
Subject: [media] rc-core: add loopback driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds a loopback driver to rc-core which I've found useful for
running scripted tests of different parts of rc-core without having to
fiddle with real hardware.

Basically it emulates hardware with a learning and a non-learning
receiver and two transmitters (which correspond to the two
receivers). TX data that is sent is fed back as input on the
corresponding receiver, which allows for debugging of IR decoders,
keymaps, etc.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/Kconfig       |  13 +++
 drivers/media/rc/Makefile      |   1 +
 drivers/media/rc/rc-loopback.c | 260 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 274 insertions(+)
 create mode 100644 drivers/media/rc/rc-loopback.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 42b4feb0e7f9..3785162f928e 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -177,4 +177,17 @@ config IR_WINBOND_CIR
            To compile this driver as a module, choose M here: the module will
 	   be called winbond_cir.
 
+config RC_LOOPBACK
+	tristate "Remote Control Loopback Driver"
+	depends on RC_CORE
+	---help---
+	   Say Y here if you want support for the remote control loopback
+	   driver which allows TX data to be sent back as RX data.
+	   This is mostly useful for debugging purposes.
+
+	   If you're not sure, select N here.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called rc_loopback.
+
 endif #RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 78ac8c5c8adc..67b4f7fe2577 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
 obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
+obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c
new file mode 100644
index 000000000000..49cee61d79c6
--- /dev/null
+++ b/drivers/media/rc/rc-loopback.c
@@ -0,0 +1,260 @@
+/*
+ * Loopback driver for rc-core,
+ *
+ * Copyright (c) 2010 David Härdeman <david@hardeman.nu>
+ *
+ * This driver receives TX data and passes it back as RX data,
+ * which is useful for (scripted) debugging of rc-core without
+ * having to use actual hardware.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <media/rc-core.h>
+
+#define DRIVER_NAME	"rc-loopback"
+#define dprintk(x...)	if (debug) printk(KERN_INFO DRIVER_NAME ": " x)
+#define RXMASK_REGULAR	0x1
+#define RXMASK_LEARNING	0x2
+
+static bool debug;
+
+struct loopback_dev {
+	struct rc_dev *dev;
+	u32 txmask;
+	u32 txcarrier;
+	u32 txduty;
+	bool idle;
+	bool learning;
+	bool carrierreport;
+	u32 rxcarriermin;
+	u32 rxcarriermax;
+};
+
+static struct loopback_dev loopdev;
+
+static int loop_set_tx_mask(struct rc_dev *dev, u32 mask)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if ((mask & (RXMASK_REGULAR | RXMASK_LEARNING)) != mask) {
+		dprintk("invalid tx mask: %u\n", mask);
+		return -EINVAL;
+	}
+
+	dprintk("setting tx mask: %u\n", mask);
+	lodev->txmask = mask;
+	return 0;
+}
+
+static int loop_set_tx_carrier(struct rc_dev *dev, u32 carrier)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	dprintk("setting tx carrier: %u\n", carrier);
+	lodev->txcarrier = carrier;
+	return 0;
+}
+
+static int loop_set_tx_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (duty_cycle < 1 || duty_cycle > 99) {
+		dprintk("invalid duty cycle: %u\n", duty_cycle);
+		return -EINVAL;
+	}
+
+	dprintk("setting duty cycle: %u\n", duty_cycle);
+	lodev->txduty = duty_cycle;
+	return 0;
+}
+
+static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (min < 1 || min > max) {
+		dprintk("invalid rx carrier range %u to %u\n", min, max);
+		return -EINVAL;
+	}
+
+	dprintk("setting rx carrier range %u to %u\n", min, max);
+	lodev->rxcarriermin = min;
+	lodev->rxcarriermax = max;
+	return 0;
+}
+
+static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+{
+	struct loopback_dev *lodev = dev->priv;
+	u32 rxmask;
+	unsigned count;
+	unsigned total_duration = 0;
+	unsigned i;
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	if (n == 0 || n % sizeof(int)) {
+		dprintk("invalid tx buffer size\n");
+		return -EINVAL;
+	}
+
+	count = n / sizeof(int);
+	for (i = 0; i < count; i++)
+		total_duration += abs(txbuf[i]);
+
+	if (total_duration == 0) {
+		dprintk("invalid tx data, total duration zero\n");
+		return -EINVAL;
+	}
+
+	if (lodev->txcarrier < lodev->rxcarriermin ||
+	    lodev->txcarrier > lodev->rxcarriermax) {
+		dprintk("ignoring tx, carrier out of range\n");
+		goto out;
+	}
+
+	if (lodev->learning)
+		rxmask = RXMASK_LEARNING;
+	else
+		rxmask = RXMASK_REGULAR;
+
+	if (!(rxmask & lodev->txmask)) {
+		dprintk("ignoring tx, rx mask mismatch\n");
+		goto out;
+	}
+
+	for (i = 0; i < count; i++) {
+		rawir.pulse = i % 2 ? false : true;
+		rawir.duration = abs(txbuf[i]) * 1000;
+		if (rawir.duration)
+			ir_raw_event_store_with_filter(dev, &rawir);
+	}
+	ir_raw_event_handle(dev);
+
+out:
+	/* Lirc expects this function to take as long as the total duration */
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(total_duration));
+	return n;
+}
+
+static void loop_set_idle(struct rc_dev *dev, bool enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->idle != enable) {
+		dprintk("%sing idle mode\n", enable ? "enter" : "exit");
+		lodev->idle = enable;
+	}
+}
+
+static int loop_set_learning_mode(struct rc_dev *dev, int enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->learning != enable) {
+		dprintk("%sing learning mode\n", enable ? "enter" : "exit");
+		lodev->learning = !!enable;
+	}
+
+	return 0;
+}
+
+static int loop_set_carrier_report(struct rc_dev *dev, int enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->carrierreport != enable) {
+		dprintk("%sabling carrier reports\n", enable ? "en" : "dis");
+		lodev->carrierreport = !!enable;
+	}
+
+	return 0;
+}
+
+static int __init loop_init(void)
+{
+	struct rc_dev *rc;
+	int ret;
+
+	rc = rc_allocate_device();
+	if (!rc) {
+		printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n");
+		return -ENOMEM;
+	}
+
+	rc->input_name		= "rc-core loopback device";
+	rc->input_phys		= "rc-core/virtual";
+	rc->input_id.bustype	= BUS_VIRTUAL;
+	rc->input_id.version	= 1;
+	rc->driver_name		= DRIVER_NAME;
+	rc->map_name		= RC_MAP_EMPTY;
+	rc->priv		= &loopdev;
+	rc->driver_type		= RC_DRIVER_IR_RAW;
+	rc->allowed_protos	= RC_TYPE_ALL;
+	rc->timeout		= 100 * 1000 * 1000; /* 100 ms */
+	rc->min_timeout		= 1;
+	rc->max_timeout		= UINT_MAX;
+	rc->rx_resolution	= 1000;
+	rc->tx_resolution	= 1000;
+	rc->s_tx_mask		= loop_set_tx_mask;
+	rc->s_tx_carrier	= loop_set_tx_carrier;
+	rc->s_tx_duty_cycle	= loop_set_tx_duty_cycle;
+	rc->s_rx_carrier_range	= loop_set_rx_carrier_range;
+	rc->tx_ir		= loop_tx_ir;
+	rc->s_idle		= loop_set_idle;
+	rc->s_learning_mode	= loop_set_learning_mode;
+	rc->s_carrier_report	= loop_set_carrier_report;
+	rc->priv		= &loopdev;
+
+	loopdev.txmask		= RXMASK_REGULAR;
+	loopdev.txcarrier	= 36000;
+	loopdev.txduty		= 50;
+	loopdev.rxcarriermin	= 1;
+	loopdev.rxcarriermax	= ~0;
+	loopdev.idle		= true;
+	loopdev.learning	= false;
+	loopdev.carrierreport	= false;
+
+	ret = rc_register_device(rc);
+	if (ret < 0) {
+		printk(KERN_ERR DRIVER_NAME ": rc_dev registration failed\n");
+		rc_free_device(rc);
+		return ret;
+	}
+
+	loopdev.dev = rc;
+	return 0;
+}
+
+static void __exit loop_exit(void)
+{
+	rc_unregister_device(loopdev.dev);
+}
+
+module_init(loop_init);
+module_exit(loop_exit);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug messages");
+
+MODULE_DESCRIPTION("Loopback device for rc-core debugging");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From b395cbac36e58a55729fe7e6262a3f0b1691bced Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri, 26 Nov 2010 14:06:41 -0300
Subject: [media] media: rc: lirc_dev: check kobject_set_name() result

kobject_set_name() may fail with -ENOMEM, check for it.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/lirc_dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index 6b9fc74f2e1d..fd237ab120bb 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -178,7 +178,9 @@ static int lirc_cdev_add(struct irctl *ir)
 		cdev_init(cdev, &lirc_dev_fops);
 		cdev->owner = THIS_MODULE;
 	}
-	kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+	if (retval)
+		return retval;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
 	if (retval)
-- 
cgit v1.2.3


From 9124544320bd36d5aa21769d17a5781ba729aebf Mon Sep 17 00:00:00 2001
From: Philippe Bourdin <richel@AngieBecker.ch>
Date: Sun, 31 Oct 2010 09:57:58 -0300
Subject: [media] Terratec Cinergy Hybrid T USB XS

I found that the problems people have reported with the USB-TV-stick
"Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042)
are coming from a wrong header file in the v4l-sources.

Attached is a diff, which fixes the problem (tested successfully here).
Obviously the USB-ID has been associated with a wrong chip: EM2880
instead of EM2882, which would be correct.

Reported-by: Philippe Bourdin <richel@AngieBecker.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-cards.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ed25c5579c33..5d79d0eb64ab 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1496,7 +1496,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
-		.name         = "Terratec Hybrid XS (em2882)",
+		.name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
@@ -1820,7 +1820,7 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0x0ccd, 0x005e),
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0042),
-			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
 	{ USB_DEVICE(0x0ccd, 0x0047),
-- 
cgit v1.2.3


From 8350e1551c27ee784ded579fd224846972d4b0d3 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 30 Nov 2010 18:42:07 -0300
Subject: [media] media: Remove unnecessary casts of usb_get_intfdata

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/siano/smsusb.c | 9 +++------
 drivers/media/rc/imon.c          | 2 +-
 2 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 50d4338610e0..0b8da57cf4c3 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -288,8 +288,7 @@ static int smsusb1_setmode(void *context, int mode)
 
 static void smsusb_term_device(struct usb_interface *intf)
 {
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *) usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 
 	if (dev) {
 		smsusb_stop_streaming(dev);
@@ -445,8 +444,7 @@ static void smsusb_disconnect(struct usb_interface *intf)
 
 static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
 {
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 	printk(KERN_INFO "%s: Entering status %d.\n", __func__, msg.event);
 	smsusb_stop_streaming(dev);
 	return 0;
@@ -455,8 +453,7 @@ static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
 static int smsusb_resume(struct usb_interface *intf)
 {
 	int rc, i;
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 	struct usb_device *udev = interface_to_usbdev(intf);
 
 	printk(KERN_INFO "%s: Entering.\n", __func__);
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index de9dc0e202d5..6811512b4e83 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -2274,7 +2274,7 @@ static int __devinit imon_probe(struct usb_interface *interface,
 	mutex_lock(&driver_lock);
 
 	first_if = usb_ifnum_to_if(usbdev, 0);
-	first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
+	first_if_ctx = usb_get_intfdata(first_if);
 
 	if (ifnum == 0) {
 		ictx = imon_init_intf0(interface);
-- 
cgit v1.2.3


From dd89aec47325a251eeaf39ee4b84adb521270cba Mon Sep 17 00:00:00 2001
From: Richard Zidlicky <rz@linux-m68k.org>
Date: Wed, 1 Dec 2010 20:52:49 -0300
Subject: [media] keycodes for DSR-0112 remote bundled with Haupauge MiniStick

Add kycodes for DSR-0112 remote that comes together with
Haupauge MiniStick
  http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg

[mchehab@redhat.com: Fix KEY_PREVIOUS to match the definition for the other model]
Signed-off-by: Richard Zidlicky <rz@linux-m68k.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
index df534b08959e..dfc9b15f43a9 100644
--- a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -75,6 +75,44 @@ static struct rc_map_table rc5_hauppauge_new[] = {
 	{ 0x1e3b, KEY_SELECT },		/* top right button */
 	{ 0x1e3c, KEY_ZOOM },		/* full */
 	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
+
+	/* Keycodes for DSR-0112 remote bundled with Haupauge MiniStick */
+	{ 0x1d00, KEY_0 },
+	{ 0x1d01, KEY_1 },
+	{ 0x1d02, KEY_2 },
+	{ 0x1d03, KEY_3 },
+	{ 0x1d04, KEY_4 },
+	{ 0x1d05, KEY_5 },
+	{ 0x1d06, KEY_6 },
+	{ 0x1d07, KEY_7 },
+	{ 0x1d08, KEY_8 },
+	{ 0x1d09, KEY_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_PREVIOUS },        /* Prev.Ch .. ??? */
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },           /* >|             */
+	{ 0x1d1f, KEY_EXIT },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },           /* <|             */
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+	{ 0x1d3f, KEY_HOME },
 };
 
 static struct rc_map_list rc5_hauppauge_new_map = {
-- 
cgit v1.2.3


From e78567d227ecd40543508342ba39a3dfba5af14f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 6 Dec 2010 06:53:05 -0300
Subject: [media] gspca/sn9c20x: Test if sensor is a OV sensor

Instead of just assuming a ov9650 sensor based on USB ID,
double-check it, by reading the sensor ID.

Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sn9c20x.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 6b155ae3a746..1e0f219188ac 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -1224,8 +1224,17 @@ static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
 static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
 {
 	int i;
+	u16 id;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (i2c_r2(gspca_dev, 0x1c, &id) < 0)
+		return -EINVAL;
+
+	if (id != 0x7fa2) {
+		err("sensor id for ov9650 doesn't match (0x%04x)", id);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
 		if (i2c_w1(gspca_dev, ov9650_init[i].reg,
 				ov9650_init[i].val) < 0) {
-- 
cgit v1.2.3


From 86701c1d6a3ecae2f0e6771c730364d334d5a142 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 7 Dec 2010 14:47:10 -0300
Subject: [media] gspca/sn9c20x: Get rid of scale "magic" numbers

Use macros for the supported scales, instead of using magic numbers
from 0 to 3.

Code become cleaner by using macros for it.

Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sn9c20x.c | 58 +++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 25 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 1e0f219188ac..e812598a677b 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -33,6 +33,14 @@ MODULE_LICENSE("GPL");
 
 #define MODULE_NAME "sn9c20x"
 
+/*
+ * Pixel format private data
+ */
+#define SCALE_MASK	0x0f
+#define SCALE_160x120	0
+#define SCALE_320x240	1
+#define SCALE_640x480	2
+#define SCALE_1280x1024	3
 #define MODE_RAW	0x10
 #define MODE_JPEG	0x20
 #define MODE_SXGA	0x80
@@ -348,47 +356,47 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 0 | MODE_JPEG},
+		.priv = SCALE_160x120 | MODE_JPEG},
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0 | MODE_RAW},
+		.priv = SCALE_160x120 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 240 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0},
+		.priv = SCALE_160x120},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 1 | MODE_JPEG},
+		.priv = SCALE_320x240 | MODE_JPEG},
 	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1 | MODE_RAW},
+		.priv = SCALE_320x240 | MODE_RAW},
 	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 480 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1},
+		.priv = SCALE_320x240},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 2 | MODE_JPEG},
+		.priv = SCALE_640x480 | MODE_JPEG},
 	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2 | MODE_RAW},
+		.priv = SCALE_640x480 | MODE_RAW},
 	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 960 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2},
+		.priv = SCALE_640x480},
 };
 
 static const struct v4l2_pix_format sxga_mode[] = {
@@ -396,52 +404,52 @@ static const struct v4l2_pix_format sxga_mode[] = {
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 0 | MODE_JPEG},
+		.priv = SCALE_160x120 | MODE_JPEG},
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0 | MODE_RAW},
+		.priv = SCALE_160x120 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 240 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0},
+		.priv = SCALE_160x120},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 1 | MODE_JPEG},
+		.priv = SCALE_320x240 | MODE_JPEG},
 	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1 | MODE_RAW},
+		.priv = SCALE_320x240 | MODE_RAW},
 	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 480 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1},
+		.priv = SCALE_320x240},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 2 | MODE_JPEG},
+		.priv = SCALE_640x480 | MODE_JPEG},
 	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2 | MODE_RAW},
+		.priv = SCALE_640x480 | MODE_RAW},
 	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 960 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2},
+		.priv = SCALE_640x480},
 	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 1280,
 		.sizeimage = 1280 * 1024,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 3 | MODE_RAW | MODE_SXGA},
+		.priv = SCALE_1280x1024 | MODE_RAW | MODE_SXGA},
 };
 
 static const s16 hsv_red_x[] = {
@@ -2182,22 +2190,22 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	else if (mode & MODE_JPEG)
 		fmt = 0x2c;
 	else
-		fmt = 0x2f;
+		fmt = 0x2f;	/* YUV 420 */
 
-	switch (mode & 0x0f) {
-	case 3:
+	switch (mode & SCALE_MASK) {
+	case SCALE_1280x1024:
 		scale = 0xc0;
 		info("Set 1280x1024");
 		break;
-	case 2:
+	case SCALE_640x480:
 		scale = 0x80;
 		info("Set 640x480");
 		break;
-	case 1:
+	case SCALE_320x240:
 		scale = 0x90;
 		info("Set 320x240");
 		break;
-	case 0:
+	case SCALE_160x120:
 		scale = 0xa0;
 		info("Set 160x120");
 		break;
-- 
cgit v1.2.3


From d4b416f26279bbbe07faaff1c9cd19d6b3709b2e Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 7 Dec 2010 17:19:09 -0300
Subject: [media] gspca core: Fix regressions gspca breaking devices with audio

Changeset 35680ba broke several devices:
	- Sony Playstation Eye (1415:2000);
	- Gigaware model 25-234 (0c45:628f);
	- Logitech Messenger Plus (046d:08f6).

Probably more devices were broken by this change.

What happens is that several devices don't need to save some bandwidth
for audio.

Also, as pointed by Hans de Goede <hdegoede@redhat.com>, the logic
that implements the bandwidth reservation for audio is broken, since
it will reduce the alt number twice, on devices with audio.

So, let's just revert the broken logic, and think on a better solution
for usb 1.1 devices with audio that can't use the maximum packetsize.

Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 0a7af7371509..5a2274b2b0e8 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -652,16 +652,12 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 				   : USB_ENDPOINT_XFER_ISOC;
 	i = gspca_dev->alt;			/* previous alt setting */
 	if (gspca_dev->cam.reverse_alts) {
-		if (gspca_dev->audio && i < gspca_dev->nbalt - 2)
-			i++;
 		while (++i < gspca_dev->nbalt) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
 				break;
 		}
 	} else {
-		if (gspca_dev->audio && i > 1)
-			i--;
 		while (--i >= 0) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
-- 
cgit v1.2.3


From d162e7aac24bfd8b96881582368f976e7e464c25 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 7 Dec 2010 19:39:33 -0300
Subject: [media] gspca/sn9c20x: Fix support for mt9m001 (mi1300) sensor

Support for mt9m001 (mi1300) is broken:
	- Table is incomplete;
	- Only one resolution is currently supported by the driver;
	- Resolution is incomplete;
	- it complains about broken JPEG headers.

Use the same init found on em28xx driver, and properly report the
output format as 8-bits GRAY.

Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sn9c20x.c | 74 ++++++++++++++++++++++++++++++-------
 1 file changed, 61 insertions(+), 13 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index e812598a677b..cb08d00d0a31 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -452,6 +452,29 @@ static const struct v4l2_pix_format sxga_mode[] = {
 		.priv = SCALE_1280x1024 | MODE_RAW | MODE_SXGA},
 };
 
+static const struct v4l2_pix_format mono_mode[] = {
+	{160, 120, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_160x120 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_320x240 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_640x480 | MODE_RAW},
+	{1280, 1024, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 1024,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_1280x1024 | MODE_RAW | MODE_SXGA},
+};
+
 static const s16 hsv_red_x[] = {
 	41,  44,  46,  48,  50,  52,  54,  56,
 	58,  60,  62,  64,  66,  68,  70,  72,
@@ -1037,16 +1060,19 @@ static struct i2c_reg_u16 mt9v011_init[] = {
 };
 
 static struct i2c_reg_u16 mt9m001_init[] = {
-	{0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
-	{0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
-	{0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
-	{0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
-	{0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
-	{0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
-	{0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
-	{0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
-	{0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
-	{0x2e, 0x0029}, {0x07, 0x0002},
+	{0x0d, 0x0001},
+	{0x0d, 0x0000},
+	{0x04, 0x0500},		/* hres = 1280 */
+	{0x03, 0x0400},		/* vres = 1024 */
+	{0x20, 0x1100},
+	{0x06, 0x0010},
+	{0x2b, 0x0024},
+	{0x2e, 0x0024},
+	{0x35, 0x0024},
+	{0x2d, 0x0020},
+	{0x2c, 0x0020},
+	{0x09, 0x0ad4},
+	{0x35, 0x0057},
 };
 
 static struct i2c_reg_u16 mt9m111_init[] = {
@@ -1442,6 +1468,25 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
+	u16 id;
+
+	if (i2c_r2(gspca_dev, 0x00, &id) < 0)
+		return -EINVAL;
+
+	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
+	switch (id) {
+	case 0x8411:
+	case 0x8421:
+		info("MT9M001 color sensor detected");
+		break;
+	case 0x8431:
+		info("MT9M001 mono sensor detected");
+		break;
+	default:
+		err("No MT9M001 chip detected, ID = %x\n", id);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
 		if (i2c_w2(gspca_dev, mt9m001_init[i].reg,
 				mt9m001_init[i].val) < 0) {
@@ -1451,8 +1496,8 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
 	}
 	/* disable hflip and vflip */
 	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
-	sd->hstart = 2;
-	sd->vstart = 2;
+	sd->hstart = 1;
+	sd->vstart = 1;
 	return 0;
 }
 
@@ -1994,6 +2039,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->cam_mode = sxga_mode;
 		cam->nmodes = ARRAY_SIZE(sxga_mode);
 		break;
+	case SENSOR_MT9M001:
+		cam->cam_mode = mono_mode;
+		cam->nmodes = ARRAY_SIZE(mono_mode);
+		break;
 	default:
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
@@ -2092,7 +2141,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case SENSOR_MT9M001:
 		if (mt9m001_init_sensor(gspca_dev) < 0)
 			return -ENODEV;
-		info("MT9M001 sensor detected");
 		break;
 	case SENSOR_HV7131R:
 		if (hv7131r_init_sensor(gspca_dev) < 0)
-- 
cgit v1.2.3


From 49aefd2bcda80d33497f0f26702c67e372cacef3 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 22 Nov 2010 23:35:17 -0300
Subject: [media] timblogiw: const and __devinitdata do not mix

This fixes the following error in PowerPC builds:

drivers/media/video/timblogiw.c: In function 'timblogiw_probe':
drivers/media/video/timblogiw.c:749: error: timblogiw_ioctl_ops causes a section type conflict

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/timblogiw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index bddcdb6ffef5..cf48aa934b8c 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -746,7 +746,7 @@ static int timblogiw_mmap(struct file *file, struct vm_area_struct *vma)
 
 /* Platform device functions */
 
-static const __devinitdata struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
+static __devinitconst struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
 	.vidioc_querycap		= timblogiw_querycap,
 	.vidioc_enum_fmt_vid_cap	= timblogiw_enum_fmt,
 	.vidioc_g_fmt_vid_cap		= timblogiw_g_fmt,
@@ -768,7 +768,7 @@ static const __devinitdata struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
 	.vidioc_enum_framesizes		= timblogiw_enum_framesizes,
 };
 
-static const __devinitdata struct v4l2_file_operations timblogiw_fops = {
+static __devinitconst struct v4l2_file_operations timblogiw_fops = {
 	.owner		= THIS_MODULE,
 	.open		= timblogiw_open,
 	.release	= timblogiw_close,
@@ -778,7 +778,7 @@ static const __devinitdata struct v4l2_file_operations timblogiw_fops = {
 	.poll		= timblogiw_poll,
 };
 
-static const __devinitdata struct video_device timblogiw_template = {
+static __devinitconst struct video_device timblogiw_template = {
 	.name		= TIMBLOGIWIN_NAME,
 	.fops		= &timblogiw_fops,
 	.ioctl_ops	= &timblogiw_ioctl_ops,
-- 
cgit v1.2.3


From e330289ed40f76819d6a13e682203c6fc9a86304 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 17 Dec 2010 14:22:09 -0300
Subject: [media] cx231xx: Fix inverted bits for RC on PV Hybrid

At Pixelview SBTVD Hybrid, the bits sent by the IR are inverted. Due to that,
the existing keytables produce wrong codes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-input.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index c236a4e7e97b..45e14cac4622 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -27,7 +27,7 @@
 static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
 			 u32 *ir_raw)
 {
-	u8	cmd;
+	u8	cmd, scancode;
 
 	dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__);
 
@@ -42,10 +42,21 @@ static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
 	if (cmd == 0xff)
 		return 0;
 
-	dev_dbg(&ir->rc->input_dev->dev, "scancode = %02x\n", cmd);
-
-	*ir_key = cmd;
-	*ir_raw = cmd;
+	scancode =
+		 ((cmd & 0x01) ? 0x80 : 0) |
+		 ((cmd & 0x02) ? 0x40 : 0) |
+		 ((cmd & 0x04) ? 0x20 : 0) |
+		 ((cmd & 0x08) ? 0x10 : 0) |
+		 ((cmd & 0x10) ? 0x08 : 0) |
+		 ((cmd & 0x20) ? 0x04 : 0) |
+		 ((cmd & 0x40) ? 0x02 : 0) |
+		 ((cmd & 0x80) ? 0x01 : 0);
+
+	dev_dbg(&ir->rc->input_dev->dev, "cmd %02x, scan = %02x\n",
+		cmd, scancode);
+
+	*ir_key = scancode;
+	*ir_raw = scancode;
 	return 1;
 }
 
-- 
cgit v1.2.3


From 12007419b766b316998499bd07c6586928230729 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 17 Dec 2010 14:39:29 -0300
Subject: [media] Add a keymap for Pixelview 002-T remote

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/Makefile            |  1 +
 drivers/media/rc/keymaps/rc-pixelview-002t.c | 77 ++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100644 drivers/media/rc/keymaps/rc-pixelview-002t.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index 3194d391bbd4..148900f443d2 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-pinnacle-pctv-hd.o \
 			rc-pixelview.o \
 			rc-pixelview-mk12.o \
+			rc-pixelview-002t.o \
 			rc-pixelview-new.o \
 			rc-powercolor-real-angel.o \
 			rc-proteus-2309.o \
diff --git a/drivers/media/rc/keymaps/rc-pixelview-002t.c b/drivers/media/rc/keymaps/rc-pixelview-002t.c
new file mode 100644
index 000000000000..e5ab071f635a
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pixelview-002t.c
@@ -0,0 +1,77 @@
+/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Keytable for 002-T IR remote provided together with Pixelview
+ * SBTVD Hybrid Remote Controller. Uses NEC extended format.
+ */
+static struct rc_map_table pixelview_002t[] = {
+	{ 0x866b13, KEY_MUTE },
+	{ 0x866b12, KEY_POWER2 },	/* power */
+
+	{ 0x866b01, KEY_1 },
+	{ 0x866b02, KEY_2 },
+	{ 0x866b03, KEY_3 },
+	{ 0x866b04, KEY_4 },
+	{ 0x866b05, KEY_5 },
+	{ 0x866b06, KEY_6 },
+	{ 0x866b07, KEY_7 },
+	{ 0x866b08, KEY_8 },
+	{ 0x866b09, KEY_9 },
+	{ 0x866b00, KEY_0 },
+
+	{ 0x866b0d, KEY_CHANNELUP },
+	{ 0x866b19, KEY_CHANNELDOWN },
+	{ 0x866b10, KEY_VOLUMEUP },	/* vol + */
+	{ 0x866b0c, KEY_VOLUMEDOWN },	/* vol - */
+
+	{ 0x866b0a, KEY_CAMERA },	/* snapshot */
+	{ 0x866b0b, KEY_ZOOM },		/* zoom */
+
+	{ 0x866b1b, KEY_BACKSPACE },
+	{ 0x866b15, KEY_ENTER },
+
+	{ 0x866b1d, KEY_UP },
+	{ 0x866b1e, KEY_DOWN },
+	{ 0x866b0e, KEY_LEFT },
+	{ 0x866b0f, KEY_RIGHT },
+
+	{ 0x866b18, KEY_RECORD },
+	{ 0x866b1a, KEY_STOP },
+};
+
+static struct rc_map_list pixelview_map = {
+	.map = {
+		.scan    = pixelview_002t,
+		.size    = ARRAY_SIZE(pixelview_002t),
+		.rc_type = RC_TYPE_NEC,
+		.name    = RC_MAP_PIXELVIEW_002T,
+	}
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+	return rc_map_register(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+	rc_map_unregister(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-- 
cgit v1.2.3


From 788e5d4dc825ffc2eb863272d9a57fb93490dd92 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Fri, 17 Dec 2010 14:47:27 -0300
Subject: [media] cx231xx: Fix IR keymap for Pixelview SBTVD Hybrid

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-cards.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 61756502c085..6905607ffca3 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -412,7 +412,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.tuner_i2c_master = 2,
 		.demod_i2c_master = 1,
 		.ir_i2c_master = 2,
-		.rc_map_name = RC_MAP_PIXELVIEW_NEW,
+		.rc_map_name = RC_MAP_PIXELVIEW_002T,
 		.has_dvb = 1,
 		.demod_addr = 0x10,
 		.norm = V4L2_STD_PAL_M,
-- 
cgit v1.2.3


From d6746d55da0819edbe913a1447b1ab0e7b440241 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Fri, 10 Dec 2010 12:28:15 -0300
Subject: [media] gspca_sonixb: Make sonixb handle 0c45:6007 instead of sn9c102

I've a 0c45:6007 camera and it works fine with the gspca_sonixb driver,
so make that handle it instead of the deprecated sn9c102 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c             | 2 --
 drivers/media/video/sn9c102/sn9c102_devtable.h | 2 --
 2 files changed, 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 11b19728a41d..bfbd8c17d28b 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1431,9 +1431,7 @@ static const struct sd_desc sd_desc = {
 static const struct usb_device_id device_table[] __devinitconst = {
 	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */
 	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */
-#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */
-#endif
 	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index ccfa59c54552..aba6d686c1f4 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -43,9 +43,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
-#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
-- 
cgit v1.2.3


From 2b3e284a89dfa53eb42b6470e4c03e5ddfdb24c5 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 12 Dec 2010 08:55:04 -0300
Subject: [media] gspca_sonixb: Rewrite start of frame detection

Our old start of frame detection code wrongly assumes that the sof
marker always lives at the beginning of the frame. At least for the
0c45:602a camera this is not the case. This patch also improves
the framerate from 28 fps to 30 fps with the 0c45:6005 and 0c45:6007

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 160 ++++++++++++++++++++++++-------------
 1 file changed, 106 insertions(+), 54 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index bfbd8c17d28b..f47a82902fa3 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -56,6 +56,8 @@ struct sd {
 	int prev_avg_lum;
 	int exp_too_low_cnt;
 	int exp_too_high_cnt;
+	int header_read;
+	u8 header[12]; /* Header without sof marker */
 
 	unsigned short exposure;
 	unsigned char gain;
@@ -1177,13 +1179,10 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	sd_init(gspca_dev);
 }
 
-static void sd_pkt_scan(struct gspca_dev *gspca_dev,
-			u8 *data,			/* isoc packet */
-			int len)			/* iso packet length */
+static u8* find_sof(struct gspca_dev *gspca_dev, u8 *data, int len)
 {
-	int i;
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct cam *cam = &gspca_dev->cam;
+	int i, header_size = (sd->bridge == BRIDGE_103) ? 18 : 12;
 
 	/* frames start with:
 	 *	ff ff 00 c4 c4 96	synchro
@@ -1194,58 +1193,84 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	 *	ll mm		brightness sum outside auto exposure
 	 *	(xx xx xx xx xx)	audio values for snc103
 	 */
-	if (len > 6 && len < 24) {
-		for (i = 0; i < len - 6; i++) {
-			if (data[0 + i] == 0xff
-			    && data[1 + i] == 0xff
-			    && data[2 + i] == 0x00
-			    && data[3 + i] == 0xc4
-			    && data[4 + i] == 0xc4
-			    && data[5 + i] == 0x96) {	/* start of frame */
-				int lum = -1;
-				int pkt_type = LAST_PACKET;
-				int fr_h_sz = (sd->bridge == BRIDGE_103) ?
-					18 : 12;
-
-				if (len - i < fr_h_sz) {
-					PDEBUG(D_STREAM, "packet too short to"
-						" get avg brightness");
-				} else if (sd->bridge == BRIDGE_103) {
-					lum = data[i + 9] +
-						(data[i + 10] << 8);
-				} else {
-					lum = data[i + 8] + (data[i + 9] << 8);
-				}
-				/* When exposure changes midway a frame we
-				   get a lum of 0 in this case drop 2 frames
-				   as the frames directly after an exposure
-				   change have an unstable image. Sometimes lum
-				   *really* is 0 (cam used in low light with
-				   low exposure setting), so do not drop frames
-				   if the previous lum was 0 too. */
-				if (lum == 0 && sd->prev_avg_lum != 0) {
-					lum = -1;
-					sd->frames_to_drop = 2;
-					sd->prev_avg_lum = 0;
-				} else
-					sd->prev_avg_lum = lum;
-				atomic_set(&sd->avg_lum, lum);
-
-				if (sd->frames_to_drop) {
-					sd->frames_to_drop--;
-					pkt_type = DISCARD_PACKET;
-				}
-
-				gspca_frame_add(gspca_dev, pkt_type,
-						NULL, 0);
-				data += i + fr_h_sz;
-				len -= i + fr_h_sz;
-				gspca_frame_add(gspca_dev, FIRST_PACKET,
-						data, len);
-				return;
+	for (i = 0; i < len; i++) {
+		switch (sd->header_read) {
+		case 0:
+			if (data[i] == 0xff)
+				sd->header_read++;
+			break;
+		case 1:
+			if (data[i] == 0xff)
+				sd->header_read++;
+			else
+				sd->header_read = 0;
+			break;
+		case 2:
+			if (data[i] == 0x00)
+				sd->header_read++;
+			else if (data[i] != 0xff)
+				sd->header_read = 0;
+			break;
+		case 3:
+			if (data[i] == 0xc4)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		case 4:
+			if (data[i] == 0xc4)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		case 5:
+			if (data[i] == 0x96)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		default:
+			sd->header[sd->header_read - 6] = data[i];
+			sd->header_read++;
+			if (sd->header_read == header_size) {
+				sd->header_read = 0;
+				return data + i + 1;
 			}
 		}
 	}
+	return NULL;
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	int fr_h_sz = 0, lum_offset = 0, len_after_sof = 0;
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+	u8 *sof;
+
+	sof = find_sof(gspca_dev, data, len);
+	if (sof) {
+		if (sd->bridge == BRIDGE_103) {
+			fr_h_sz = 18;
+			lum_offset = 3;
+		} else {
+			fr_h_sz = 12;
+			lum_offset = 2;
+		}
+
+		len_after_sof = len - (sof - data);
+		len = (sof - data) - fr_h_sz;
+		if (len < 0)
+			len = 0;
+	}
 
 	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
 		/* In raw mode we sometimes get some garbage after the frame
@@ -1259,6 +1284,33 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+
+	if (sof) {
+		int  lum = sd->header[lum_offset] +
+			  (sd->header[lum_offset + 1] << 8);
+
+		/* When exposure changes midway a frame we
+		   get a lum of 0 in this case drop 2 frames
+		   as the frames directly after an exposure
+		   change have an unstable image. Sometimes lum
+		   *really* is 0 (cam used in low light with
+		   low exposure setting), so do not drop frames
+		   if the previous lum was 0 too. */
+		if (lum == 0 && sd->prev_avg_lum != 0) {
+			lum = -1;
+			sd->frames_to_drop = 2;
+			sd->prev_avg_lum = 0;
+		} else
+			sd->prev_avg_lum = lum;
+		atomic_set(&sd->avg_lum, lum);
+
+		if (sd->frames_to_drop)
+			sd->frames_to_drop--;
+		else
+			gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+
+		gspca_frame_add(gspca_dev, FIRST_PACKET, sof, len_after_sof);
+	}
 }
 
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-- 
cgit v1.2.3


From 00765f16f116b45aa67de306ac923ed4ba262bf9 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 12 Dec 2010 15:55:03 -0300
Subject: [media] gspca_sonixb: Add support for 0c45:602a

Add support for cameras with the HV7131D sensor, such as the 0c45:602a

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c             | 70 ++++++++++++++++++++++----
 drivers/media/video/sn9c102/sn9c102_devtable.h |  2 +-
 2 files changed, 60 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index f47a82902fa3..73504a3f87b7 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -73,14 +73,15 @@ struct sd {
 #define BRIDGE_103 1
 
 	__u8 sensor;			/* Type of image sensor chip */
-#define SENSOR_HV7131R 0
-#define SENSOR_OV6650 1
-#define SENSOR_OV7630 2
-#define SENSOR_PAS106 3
-#define SENSOR_PAS202 4
-#define SENSOR_TAS5110C 5
-#define SENSOR_TAS5110D 6
-#define SENSOR_TAS5130CXX 7
+#define SENSOR_HV7131D 0
+#define SENSOR_HV7131R 1
+#define SENSOR_OV6650 2
+#define SENSOR_OV7630 3
+#define SENSOR_PAS106 4
+#define SENSOR_PAS202 5
+#define SENSOR_TAS5110C 6
+#define SENSOR_TAS5110D 7
+#define SENSOR_TAS5130CXX 8
 	__u8 reg11;
 };
 
@@ -305,14 +306,29 @@ static const struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
-static const __u8 initHv7131[] = {
+static const __u8 initHv7131d[] = {
+	0x04, 0x03, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
+	0x00, 0x00,
+	0x00, 0x00, 0x00, 0x02, 0x02, 0x00,
+	0x28, 0x1e, 0x60, 0x8e, 0x42,
+	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
+};
+static const __u8 hv7131d_sensor_init[][8] = {
+	{0xa0, 0x11, 0x01, 0x04, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x02, 0x00, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x28, 0x00, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x30, 0x30, 0x00, 0x00, 0x00, 0x17}, /* reset level */
+	{0xa0, 0x11, 0x34, 0x02, 0x00, 0x00, 0x00, 0x17}, /* pixel bias volt */
+};
+
+static const __u8 initHv7131r[] = {
 	0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
 	0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
 	0x28, 0x1e, 0x60, 0x8a, 0x20,
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
 };
-static const __u8 hv7131_sensor_init[][8] = {
+static const __u8 hv7131r_sensor_init[][8] = {
 	{0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10},
 	{0xa0, 0x11, 0x01, 0x08, 0x2a, 0x2e, 0x00, 0x10},
 	{0xb0, 0x11, 0x20, 0x00, 0xd0, 0x2e, 0x00, 0x10},
@@ -553,7 +569,8 @@ static const __u8 tas5130_sensor_init[][8] = {
 };
 
 static struct sensor_data sensor_data[] = {
-SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initHv7131d, NULL, hv7131d_sensor_init, NULL, NULL, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initHv7131r, NULL, hv7131r_sensor_init, NULL, NULL, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0),
 SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
 SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
 	F_GAIN, 0, 0x21),
@@ -703,7 +720,18 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
 	unsigned char gain = sd->gain;
 
 	switch (sd->sensor) {
+	case SENSOR_HV7131D: {
+		__u8 i2c[] =
+			{0xc0, 0x11, 0x31, 0x00, 0x00, 0x00, 0x00, 0x17};
+
+		i2c[3] = 0x3f - (sd->gain / 4);
+		i2c[4] = 0x3f - (sd->gain / 4);
+		i2c[5] = 0x3f - (sd->gain / 4);
 
+		if (i2c_w(gspca_dev, i2c) < 0)
+			goto err;
+		break;
+	    }
 	case SENSOR_TAS5110C:
 	case SENSOR_TAS5110D: {
 		__u8 i2c[] =
@@ -790,6 +818,23 @@ static void setexposure(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	switch (sd->sensor) {
+	case SENSOR_HV7131D: {
+		/* Note the datasheet wrongly says line mode exposure uses reg
+		   0x26 and 0x27, testing has shown 0x25 + 0x26 */
+		__u8 i2c[] = {0xc0, 0x11, 0x25, 0x00, 0x00, 0x00, 0x00, 0x17};
+		/* The HV7131D's exposure goes from 0 - 65535, we scale our
+		   exposure of 0-1023 to 0-6138. There are 2 reasons for this:
+		   1) This puts our exposure knee of 200 at approx the point
+		      where the framerate starts dropping
+		   2) At 6138 the framerate has already dropped to 2 fps,
+		      going any lower makes little sense */
+		__u16 reg = sd->exposure * 6;
+		i2c[3] = reg >> 8;
+		i2c[4] = reg & 0xff;
+		if (i2c_w(gspca_dev, i2c) != 0)
+			goto err;
+		break;
+	    }
 	case SENSOR_TAS5110C:
 	case SENSOR_TAS5110D: {
 		/* register 19's high nibble contains the sn9c10x clock divider
@@ -1494,9 +1539,12 @@ static const struct usb_device_id device_table[] __devinitconst = {
 #endif
 	{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
 	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+	{USB_DEVICE(0x0c45, 0x602a), SB(HV7131D, 102)},
+	/* {USB_DEVICE(0x0c45, 0x602b), SB(MI0343, 102)}, */
 	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+	/* {USB_DEVICE(0x0c45, 0x602b), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */
 	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index aba6d686c1f4..41064c7b5ef8 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -54,8 +54,8 @@ static const struct usb_device_id sn9c102_id_table[] = {
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6028, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), },
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
-- 
cgit v1.2.3


From 87d1a50ce45168cbaec10397e876286a398052c1 Mon Sep 17 00:00:00 2001
From: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Date: Fri, 10 Dec 2010 11:41:34 -0300
Subject: [media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver

This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/Kconfig        |   16 +
 drivers/media/radio/Makefile       |    1 +
 drivers/media/radio/radio-wl1273.c | 2331 ++++++++++++++++++++++++++++++++++++
 3 files changed, 2348 insertions(+)
 create mode 100644 drivers/media/radio/radio-wl1273.c

(limited to 'drivers/media')

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 83567b898d09..3c5a4739ed70 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -452,4 +452,20 @@ config RADIO_TIMBERDALE
 	  found behind the Timberdale FPGA on the Russellville board.
 	  Enabling this driver will automatically select the DSP and tuner.
 
+config RADIO_WL1273
+	tristate "Texas Instruments WL1273 I2C FM Radio"
+	depends on I2C && VIDEO_V4L2
+	select MFD_WL1273_CORE
+	select FW_LOADER
+	---help---
+	  Choose Y here if you have this FM radio chip.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux 2 API.  Information on
+	  this API and pointers to "v4l2" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-wl1273.
+
 endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index f615583b4837..d2970748a69f 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
 obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o
 obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
 obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o
+obj-$(CONFIG_RADIO_WL1273) += radio-wl1273.o
 
 EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
new file mode 100644
index 000000000000..1813790b8e9b
--- /dev/null
+++ b/drivers/media/radio/radio-wl1273.c
@@ -0,0 +1,2331 @@
+/*
+ * Driver for the Texas Instruments WL1273 FM radio.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/wl1273-core.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#define DRIVER_DESC "Wl1273 FM Radio"
+
+#define WL1273_POWER_SET_OFF		0
+#define WL1273_POWER_SET_FM		BIT(0)
+#define WL1273_POWER_SET_RDS		BIT(1)
+#define WL1273_POWER_SET_RETENTION	BIT(4)
+
+#define WL1273_PUPD_SET_OFF		0x00
+#define WL1273_PUPD_SET_ON		0x01
+#define WL1273_PUPD_SET_RETENTION	0x10
+
+#define WL1273_FREQ(x)		(x * 10000 / 625)
+#define WL1273_INV_FREQ(x)	(x * 625 / 10000)
+
+/*
+ * static int radio_nr - The number of the radio device
+ *
+ * The default is 0.
+ */
+static int radio_nr;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "The number of the radio device. Default = 0");
+
+struct wl1273_device {
+	char *bus_type;
+
+	u8 forbidden;
+	unsigned int preemphasis;
+	unsigned int spacing;
+	unsigned int tx_power;
+	unsigned int rx_frequency;
+	unsigned int tx_frequency;
+	unsigned int rangelow;
+	unsigned int rangehigh;
+	unsigned int band;
+	bool stereo;
+
+	/* RDS */
+	unsigned int rds_on;
+	struct delayed_work work;
+
+	wait_queue_head_t read_queue;
+	struct mutex lock; /* for serializing fm radio operations */
+	struct completion busy;
+
+	unsigned char *buffer;
+	unsigned int buf_size;
+	unsigned int rd_index;
+	unsigned int wr_index;
+
+	/* Selected interrupts */
+	u16 irq_flags;
+	u16 irq_received;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_device v4l2dev;
+	struct video_device videodev;
+	struct device *dev;
+	struct wl1273_core *core;
+	struct file *owner;
+	char *write_buf;
+	unsigned int rds_users;
+};
+
+#define WL1273_IRQ_MASK	 (WL1273_FR_EVENT		|	\
+			  WL1273_POW_ENB_EVENT)
+
+/*
+ * static unsigned int rds_buf - the number of RDS buffer blocks used.
+ *
+ * The default number is 100.
+ */
+static unsigned int rds_buf = 100;
+module_param(rds_buf, uint, 0);
+MODULE_PARM_DESC(rds_buf, "Number of RDS buffer entries. Default = 100");
+
+static int wl1273_fm_read_reg(struct wl1273_core *core, u8 reg, u16 *value)
+{
+	struct i2c_client *client = core->client;
+	u8 b[2];
+	int r;
+
+	r = i2c_smbus_read_i2c_block_data(client, reg, sizeof(b), b);
+	if (r != 2) {
+		dev_err(&client->dev, "%s: Read: %d fails.\n", __func__, reg);
+		return -EREMOTEIO;
+	}
+
+	*value = (u16)b[0] << 8 | b[1];
+
+	return 0;
+}
+
+static int wl1273_fm_write_cmd(struct wl1273_core *core, u8 cmd, u16 param)
+{
+	struct i2c_client *client = core->client;
+	u8 buf[] = { (param >> 8) & 0xff, param & 0xff };
+	int r;
+
+	r = i2c_smbus_write_i2c_block_data(client, cmd, sizeof(buf), buf);
+	if (r) {
+		dev_err(&client->dev, "%s: Cmd: %d fails.\n", __func__, cmd);
+		return r;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_write_data(struct wl1273_core *core, u8 *data, u16 len)
+{
+	struct i2c_client *client = core->client;
+	struct i2c_msg msg;
+	int r;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.buf = data;
+	msg.len = len;
+
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		dev_err(&client->dev, "%s: write error.\n", __func__);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_write_fw(struct wl1273_core *core,
+			      __u8 *fw, int len)
+{
+	struct i2c_client *client = core->client;
+	struct i2c_msg msg;
+	int i, r = 0;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+
+	for (i = 0; i <= len; i++) {
+		msg.len = fw[0];
+		msg.buf = fw + 1;
+
+		fw += msg.len + 1;
+		dev_dbg(&client->dev, "%s:len[%d]: %d\n", __func__, i, msg.len);
+
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r < 0 && i < len + 1)
+			break;
+	}
+
+	dev_dbg(&client->dev, "%s: i: %d\n", __func__, i);
+	dev_dbg(&client->dev, "%s: len + 1: %d\n", __func__, len + 1);
+
+	/* Last transfer always fails. */
+	if (i == len || r == 1)
+		r = 0;
+
+	return r;
+}
+
+/**
+ * wl1273_fm_set_audio() -	Set audio mode.
+ * @core:			A pointer to the device struct.
+ * @new_mode:			The new audio mode.
+ *
+ * Audio modes are WL1273_AUDIO_DIGITAL and WL1273_AUDIO_ANALOG.
+ */
+static int wl1273_fm_set_audio(struct wl1273_core *core, unsigned int new_mode)
+{
+	int r = 0;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	if (core->mode == WL1273_MODE_RX && new_mode == WL1273_AUDIO_DIGITAL) {
+		r = wl1273_fm_write_cmd(core, WL1273_PCM_MODE_SET,
+					WL1273_PCM_DEF_MODE);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_I2S_MODE_CONFIG_SET,
+					core->i2s_mode);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_ENABLE,
+					WL1273_AUDIO_ENABLE_I2S);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_RX &&
+		   new_mode == WL1273_AUDIO_ANALOG) {
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_ENABLE,
+					WL1273_AUDIO_ENABLE_ANALOG);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_TX &&
+		   new_mode == WL1273_AUDIO_DIGITAL) {
+		r = wl1273_fm_write_cmd(core, WL1273_I2S_MODE_CONFIG_SET,
+					core->i2s_mode);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_IO_SET,
+					WL1273_AUDIO_IO_SET_I2S);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_TX &&
+		   new_mode == WL1273_AUDIO_ANALOG) {
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_IO_SET,
+					WL1273_AUDIO_IO_SET_ANALOG);
+		if (r)
+			goto out;
+	}
+
+	core->audio_mode = new_mode;
+out:
+	return r;
+}
+
+/**
+ * wl1273_fm_set_volume() -	Set volume.
+ * @core:			A pointer to the device struct.
+ * @volume:			The new volume value.
+ */
+static int wl1273_fm_set_volume(struct wl1273_core *core, unsigned int volume)
+{
+	u16 val;
+	int r;
+
+	if (volume > WL1273_MAX_VOLUME)
+		return -EINVAL;
+
+	if (core->volume == volume)
+		return 0;
+
+	val = volume;
+	r = wl1273_fm_read_reg(core, WL1273_VOLUME_SET, &val);
+	if (r)
+		return r;
+
+	core->volume = volume;
+	return 0;
+}
+
+#define WL1273_FIFO_HAS_DATA(status)	(1 << 5 & status)
+#define WL1273_RDS_CORRECTABLE_ERROR	(1 << 3)
+#define WL1273_RDS_UNCORRECTABLE_ERROR	(1 << 4)
+
+static int wl1273_fm_rds(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	struct i2c_client *client = core->client;
+	u16 val;
+	u8 b0 = WL1273_RDS_DATA_GET, status;
+	struct v4l2_rds_data rds = { 0, 0, 0 };
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.buf = &b0,
+			.len = 1,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.buf = (u8 *) &rds,
+			.len = sizeof(rds),
+		}
+	};
+	int r;
+
+	if (core->mode != WL1273_MODE_RX)
+		return 0;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r)
+		return r;
+
+	if ((val & 0x01) == 0) {
+		/* RDS decoder not synchronized */
+		return -EAGAIN;
+	}
+
+	/* copy all four RDS blocks to internal buffer */
+	do {
+		r = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+		if (r != ARRAY_SIZE(msg)) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": %s: read_rds error r == %i)\n",
+				__func__, r);
+		}
+
+		status = rds.block;
+
+		if (!WL1273_FIFO_HAS_DATA(status))
+			break;
+
+		/* copy bits 0-2 (the block ID) to bits 3-5 */
+		rds.block = V4L2_RDS_BLOCK_MSK & status;
+		rds.block |= rds.block << 3;
+
+		/* copy the error bits to standard positions */
+		if (WL1273_RDS_UNCORRECTABLE_ERROR & status) {
+			rds.block |= V4L2_RDS_BLOCK_ERROR;
+			rds.block &= ~V4L2_RDS_BLOCK_CORRECTED;
+		} else if  (WL1273_RDS_CORRECTABLE_ERROR & status) {
+			rds.block &= ~V4L2_RDS_BLOCK_ERROR;
+			rds.block |= V4L2_RDS_BLOCK_CORRECTED;
+		}
+
+		/* copy RDS block to internal buffer */
+		memcpy(&radio->buffer[radio->wr_index], &rds, RDS_BLOCK_SIZE);
+		radio->wr_index += 3;
+
+		/* wrap write pointer */
+		if (radio->wr_index >= radio->buf_size)
+			radio->wr_index = 0;
+
+		/* check for overflow & start over */
+		if (radio->wr_index == radio->rd_index) {
+			dev_dbg(radio->dev, "RDS OVERFLOW");
+
+			radio->rd_index = 0;
+			radio->wr_index = 0;
+			break;
+		}
+	} while (WL1273_FIFO_HAS_DATA(status));
+
+	/* wake up read queue */
+	if (radio->wr_index != radio->rd_index)
+		wake_up_interruptible(&radio->read_queue);
+
+	return 0;
+}
+
+static irqreturn_t wl1273_fm_irq_thread_handler(int irq, void *dev_id)
+{
+	struct wl1273_device *radio = dev_id;
+	struct wl1273_core *core = radio->core;
+	u16 flags;
+	int r;
+
+	r = wl1273_fm_read_reg(core, WL1273_FLAG_GET, &flags);
+	if (r)
+		goto out;
+
+	if (flags & WL1273_BL_EVENT) {
+		radio->irq_received = flags;
+		dev_dbg(radio->dev, "IRQ: BL\n");
+	}
+
+	if (flags & WL1273_RDS_EVENT) {
+		msleep(200);
+
+		wl1273_fm_rds(radio);
+	}
+
+	if (flags & WL1273_BBLK_EVENT)
+		dev_dbg(radio->dev, "IRQ: BBLK\n");
+
+	if (flags & WL1273_LSYNC_EVENT)
+		dev_dbg(radio->dev, "IRQ: LSYNC\n");
+
+	if (flags & WL1273_LEV_EVENT) {
+		u16 level;
+
+		r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &level);
+		if (r)
+			goto out;
+
+		if (level > 14)
+			dev_dbg(radio->dev, "IRQ: LEV: 0x%x04\n", level);
+	}
+
+	if (flags & WL1273_IFFR_EVENT)
+		dev_dbg(radio->dev, "IRQ: IFFR\n");
+
+	if (flags & WL1273_PI_EVENT)
+		dev_dbg(radio->dev, "IRQ: PI\n");
+
+	if (flags & WL1273_PD_EVENT)
+		dev_dbg(radio->dev, "IRQ: PD\n");
+
+	if (flags & WL1273_STIC_EVENT)
+		dev_dbg(radio->dev, "IRQ: STIC\n");
+
+	if (flags & WL1273_MAL_EVENT)
+		dev_dbg(radio->dev, "IRQ: MAL\n");
+
+	if (flags & WL1273_POW_ENB_EVENT) {
+		complete(&radio->busy);
+		dev_dbg(radio->dev, "NOT BUSY\n");
+		dev_dbg(radio->dev, "IRQ: POW_ENB\n");
+	}
+
+	if (flags & WL1273_SCAN_OVER_EVENT)
+		dev_dbg(radio->dev, "IRQ: SCAN_OVER\n");
+
+	if (flags & WL1273_ERROR_EVENT)
+		dev_dbg(radio->dev, "IRQ: ERROR\n");
+
+	if (flags & WL1273_FR_EVENT) {
+		u16 freq;
+
+		dev_dbg(radio->dev, "IRQ: FR:\n");
+
+		if (core->mode == WL1273_MODE_RX) {
+			r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+						TUNER_MODE_STOP_SEARCH);
+			if (r) {
+				dev_err(radio->dev,
+					"%s: TUNER_MODE_SET fails: %d\n",
+					__func__, r);
+				goto out;
+			}
+
+			r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &freq);
+			if (r)
+				goto out;
+
+			if (radio->band == WL1273_BAND_JAPAN)
+				radio->rx_frequency = WL1273_BAND_JAPAN_LOW +
+					freq * 50;
+			else
+				radio->rx_frequency = WL1273_BAND_OTHER_LOW +
+					freq * 50;
+			/*
+			 *  The driver works better with this msleep,
+			 *  the documentation doesn't mention it.
+			 */
+			usleep_range(10000, 15000);
+
+			dev_dbg(radio->dev, "%dkHz\n", radio->rx_frequency);
+
+		} else {
+			r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &freq);
+			if (r)
+				goto out;
+
+			dev_dbg(radio->dev, "%dkHz\n", freq);
+		}
+		dev_dbg(radio->dev, "%s: NOT BUSY\n", __func__);
+	}
+
+out:
+	wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+			    radio->irq_flags);
+	complete(&radio->busy);
+
+	return IRQ_HANDLED;
+}
+
+static int wl1273_fm_set_tx_freq(struct wl1273_device *radio, unsigned int freq)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	if (freq < WL1273_BAND_TX_LOW) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d < %d\n", freq,
+			WL1273_BAND_TX_LOW);
+		return -ERANGE;
+	}
+
+	if (freq > WL1273_BAND_TX_HIGH) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d > %d\n", freq,
+			WL1273_BAND_TX_HIGH);
+		return -ERANGE;
+	}
+
+	/*
+	 *  The driver works better with this sleep,
+	 *  the documentation doesn't mention it.
+	 */
+	usleep_range(5000, 10000);
+
+	dev_dbg(radio->dev, "%s: freq: %d kHz\n", __func__, freq);
+
+	/* Set the current tx channel */
+	r = wl1273_fm_write_cmd(core, WL1273_CHANL_SET, freq / 10);
+	if (r)
+		return r;
+
+	INIT_COMPLETION(radio->busy);
+
+	/* wait for the FR IRQ */
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(2000));
+	if (!r)
+		return -ETIMEDOUT;
+
+	dev_dbg(radio->dev, "WL1273_CHANL_SET: %d\n", r);
+
+	/* Enable the output power */
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_ENB_SET, 1);
+	if (r)
+		return r;
+
+	INIT_COMPLETION(radio->busy);
+
+	/* wait for the POWER_ENB IRQ */
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+	if (!r)
+		return -ETIMEDOUT;
+
+	radio->tx_frequency = freq;
+	dev_dbg(radio->dev, "WL1273_POWER_ENB_SET: %d\n", r);
+
+	return	0;
+}
+
+static int wl1273_fm_set_rx_freq(struct wl1273_device *radio, unsigned int freq)
+{
+	struct wl1273_core *core = radio->core;
+	int r, f;
+
+	if (freq < radio->rangelow) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d < %d\n", freq,
+			radio->rangelow);
+		r = -ERANGE;
+		goto err;
+	}
+
+	if (freq > radio->rangehigh) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d > %d\n", freq,
+			radio->rangehigh);
+		r = -ERANGE;
+		goto err;
+	}
+
+	dev_dbg(radio->dev, "%s: %dkHz\n", __func__, freq);
+
+	wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+
+	if (radio->band == WL1273_BAND_JAPAN)
+		f = (freq - WL1273_BAND_JAPAN_LOW) / 50;
+	else
+		f = (freq - WL1273_BAND_OTHER_LOW) / 50;
+
+	r = wl1273_fm_write_cmd(core, WL1273_FREQ_SET, f);
+	if (r) {
+		dev_err(radio->dev, "FREQ_SET fails\n");
+		goto err;
+	}
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET, TUNER_MODE_PRESET);
+	if (r) {
+		dev_err(radio->dev, "TUNER_MODE_SET fails\n");
+		goto err;
+	}
+
+	INIT_COMPLETION(radio->busy);
+
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(2000));
+	if (!r) {
+		dev_err(radio->dev, "%s: TIMEOUT\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	radio->rd_index = 0;
+	radio->wr_index = 0;
+	radio->rx_frequency = freq;
+	return 0;
+err:
+	return r;
+}
+
+static int wl1273_fm_get_freq(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	unsigned int freq;
+	u16 f;
+	int r;
+
+	if (core->mode == WL1273_MODE_RX) {
+		r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &f);
+		if (r)
+			return r;
+
+		dev_dbg(radio->dev, "Freq get: 0x%04x\n", f);
+		if (radio->band == WL1273_BAND_JAPAN)
+			freq = WL1273_BAND_JAPAN_LOW + 50 * f;
+		else
+			freq = WL1273_BAND_OTHER_LOW + 50 * f;
+	} else {
+		r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &f);
+		if (r)
+			return r;
+
+		freq = f * 10;
+	}
+
+	return freq;
+}
+
+/**
+ * wl1273_fm_upload_firmware_patch() -	Upload the firmware.
+ * @radio:				A pointer to the device struct.
+ *
+ * The firmware file consists of arrays of bytes where the first byte
+ * gives the array length. The first byte in the file gives the
+ * number of these arrays.
+ */
+static int wl1273_fm_upload_firmware_patch(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	unsigned int packet_num;
+	const struct firmware *fw_p;
+	const char *fw_name = "radio-wl1273-fw.bin";
+	struct device *dev = radio->dev;
+	__u8 *ptr;
+	int i, n, r;
+
+	dev_dbg(dev, "%s:\n", __func__);
+
+	/*
+	 * Uploading the firmware patch is not always necessary,
+	 * so we only print an info message.
+	 */
+	if (request_firmware(&fw_p, fw_name, dev)) {
+		dev_info(dev, "%s - %s not found\n", __func__, fw_name);
+
+		return 0;
+	}
+
+	ptr = (__u8 *) fw_p->data;
+	packet_num = ptr[0];
+	dev_dbg(dev, "%s: packets: %d\n", __func__, packet_num);
+
+	r = wl1273_fm_write_fw(core, ptr + 1, packet_num);
+	if (r) {
+		dev_err(dev, "FW upload error: %d\n", r);
+		goto out;
+	}
+
+	/* ignore possible error here */
+	wl1273_fm_write_cmd(core, WL1273_RESET, 0);
+
+	dev_dbg(dev, "n: %d, i: %d\n", n, i);
+	dev_dbg(dev, "%s - download OK, r: %d\n", __func__, r);
+out:
+	release_firmware(fw_p);
+	return r;
+}
+
+static int wl1273_fm_stop(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+
+	if (core->mode == WL1273_MODE_RX) {
+		int r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+				    WL1273_POWER_SET_OFF);
+		if (r)
+			dev_err(radio->dev, "%s: POWER_SET fails: %d\n",
+				__func__, r);
+	} else if (core->mode == WL1273_MODE_TX) {
+		int r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					    WL1273_PUPD_SET_OFF);
+		if (r)
+			dev_err(radio->dev,
+				"%s: PUPD_SET fails: %d\n", __func__, r);
+	}
+
+	if (core->pdata->disable) {
+		core->pdata->disable();
+		dev_dbg(radio->dev, "Back to reset\n");
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_start(struct wl1273_device *radio, int new_mode)
+{
+	struct wl1273_core *core = radio->core;
+	struct wl1273_fm_platform_data *pdata = core->pdata;
+	struct device *dev = radio->dev;
+	int r = -EINVAL;
+
+	if (pdata->enable && core->mode == WL1273_MODE_OFF) {
+		dev_dbg(radio->dev, "Out of reset\n");
+
+		pdata->enable();
+		msleep(250);
+	}
+
+	if (new_mode == WL1273_MODE_RX) {
+		u16 val = WL1273_POWER_SET_FM;
+
+		if (radio->rds_on)
+			val |= WL1273_POWER_SET_RDS;
+
+		/* If this fails try again */
+		r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+		if (r) {
+			msleep(100);
+
+			r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+			if (r) {
+				dev_err(dev, "%s: POWER_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+
+		/* rds buffer configuration */
+		radio->wr_index = 0;
+		radio->rd_index = 0;
+
+	} else if (new_mode == WL1273_MODE_TX) {
+		/* If this fails try again once */
+		r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					WL1273_PUPD_SET_ON);
+		if (r) {
+			msleep(100);
+			r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					WL1273_PUPD_SET_ON);
+			if (r) {
+				dev_err(dev, "%s: PUPD_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+
+		if (radio->rds_on)
+			r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 1);
+		else
+			r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 0);
+	} else {
+		dev_warn(dev, "%s: Illegal mode.\n", __func__);
+	}
+
+	if (core->mode == WL1273_MODE_OFF) {
+		r = wl1273_fm_upload_firmware_patch(radio);
+		if (r)
+			dev_warn(dev, "Firmware upload failed.\n");
+
+		/*
+		 * Sometimes the chip is in a wrong power state at this point.
+		 * So we set the power once again.
+		 */
+		if (new_mode == WL1273_MODE_RX) {
+			u16 val = WL1273_POWER_SET_FM;
+
+			if (radio->rds_on)
+				val |= WL1273_POWER_SET_RDS;
+
+			r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+			if (r) {
+				dev_err(dev, "%s: POWER_SET fails\n", __func__);
+				goto fail;
+			}
+		} else if (new_mode == WL1273_MODE_TX) {
+			r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+						WL1273_PUPD_SET_ON);
+			if (r) {
+				dev_err(dev, "%s: PUPD_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+	}
+
+	return 0;
+fail:
+	if (pdata->disable)
+		pdata->disable();
+
+	dev_dbg(dev, "%s: return: %d\n", __func__, r);
+	return r;
+}
+
+static int wl1273_fm_suspend(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	/* Cannot go from OFF to SUSPENDED */
+	if (core->mode == WL1273_MODE_RX)
+		r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+				WL1273_POWER_SET_RETENTION);
+	else if (core->mode == WL1273_MODE_TX)
+		r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+				WL1273_PUPD_SET_RETENTION);
+	else
+		r = -EINVAL;
+
+	if (r) {
+		dev_err(radio->dev, "%s: POWER_SET fails: %d\n", __func__, r);
+		goto out;
+	}
+
+out:
+	return r;
+}
+
+static int wl1273_fm_set_mode(struct wl1273_device *radio, int mode)
+{
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	int old_mode;
+	int r;
+
+	dev_dbg(dev, "%s\n", __func__);
+	dev_dbg(dev, "Forbidden modes: 0x%02x\n", radio->forbidden);
+
+	old_mode = core->mode;
+	if (mode & radio->forbidden) {
+		r = -EPERM;
+		goto out;
+	}
+
+	switch (mode) {
+	case WL1273_MODE_RX:
+	case WL1273_MODE_TX:
+		r = wl1273_fm_start(radio, mode);
+		if (r) {
+			dev_err(dev, "%s: Cannot start.\n", __func__);
+			wl1273_fm_stop(radio);
+			goto out;
+		}
+
+		core->mode = mode;
+		r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+					radio->irq_flags);
+		if (r) {
+			dev_err(dev, "INT_MASK_SET fails.\n");
+			goto out;
+		}
+
+		/* remember previous settings */
+		if (mode == WL1273_MODE_RX) {
+			r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+			if (r) {
+				dev_err(dev, "set freq fails: %d.\n", r);
+				goto out;
+			}
+
+			r = core->set_volume(core, core->volume);
+			if (r) {
+				dev_err(dev, "set volume fails: %d.\n", r);
+				goto out;
+			}
+
+			dev_dbg(dev, "%s: Set vol: %d.\n", __func__,
+				core->volume);
+		} else {
+			r = wl1273_fm_set_tx_freq(radio, radio->tx_frequency);
+			if (r) {
+				dev_err(dev, "set freq fails: %d.\n", r);
+				goto out;
+			}
+		}
+
+		dev_dbg(radio->dev, "%s: Set audio mode.\n", __func__);
+
+		r = core->set_audio(core, core->audio_mode);
+		if (r)
+			dev_err(dev, "Cannot set audio mode.\n");
+		break;
+
+	case WL1273_MODE_OFF:
+		r = wl1273_fm_stop(radio);
+		if (r)
+			dev_err(dev, "%s: Off fails: %d\n", __func__, r);
+		else
+			core->mode = WL1273_MODE_OFF;
+
+		break;
+
+	case WL1273_MODE_SUSPENDED:
+		r = wl1273_fm_suspend(radio);
+		if (r)
+			dev_err(dev, "%s: Suspend fails: %d\n", __func__, r);
+		else
+			core->mode = WL1273_MODE_SUSPENDED;
+
+		break;
+
+	default:
+		dev_err(dev, "%s: Unknown mode: %d\n", __func__, mode);
+		r = -EINVAL;
+		break;
+	}
+out:
+	if (r)
+		core->mode = old_mode;
+
+	return r;
+}
+
+static int wl1273_fm_set_seek(struct wl1273_device *radio,
+			      unsigned int wrap_around,
+			      unsigned int seek_upward,
+			      int level)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+	unsigned int dir = (seek_upward == 0) ? 0 : 1;
+	unsigned int f;
+
+	f = radio->rx_frequency;
+	dev_dbg(radio->dev, "rx_frequency: %d\n", f);
+
+	if (dir && f + radio->spacing <= radio->rangehigh)
+		r = wl1273_fm_set_rx_freq(radio, f + radio->spacing);
+	else if (dir && wrap_around)
+		r = wl1273_fm_set_rx_freq(radio, radio->rangelow);
+	else if (f - radio->spacing >= radio->rangelow)
+		r = wl1273_fm_set_rx_freq(radio, f - radio->spacing);
+	else if (wrap_around)
+		r = wl1273_fm_set_rx_freq(radio, radio->rangehigh);
+
+	if (r)
+		goto out;
+
+	if (level < SCHAR_MIN || level > SCHAR_MAX)
+		return -EINVAL;
+
+	INIT_COMPLETION(radio->busy);
+	dev_dbg(radio->dev, "%s: BUSY\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+	if (r)
+		goto out;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_SEARCH_LVL_SET, level);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_write_cmd(core, WL1273_SEARCH_DIR_SET, dir);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+				TUNER_MODE_AUTO_SEEK);
+	if (r)
+		goto out;
+
+	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+	if (!(radio->irq_received & WL1273_BL_EVENT))
+		goto out;
+
+	radio->irq_received &= ~WL1273_BL_EVENT;
+
+	if (!wrap_around)
+		goto out;
+
+	/* Wrap around */
+	dev_dbg(radio->dev, "Wrap around in HW seek.\n");
+
+	if (seek_upward)
+		f = radio->rangelow;
+	else
+		f = radio->rangehigh;
+
+	r = wl1273_fm_set_rx_freq(radio, f);
+	if (r)
+		goto out;
+
+	INIT_COMPLETION(radio->busy);
+	dev_dbg(radio->dev, "%s: BUSY\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+				TUNER_MODE_AUTO_SEEK);
+	if (r)
+		goto out;
+
+	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+out:
+	dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
+	return r;
+}
+
+/**
+ * wl1273_fm_get_tx_ctune() -	Get the TX tuning capacitor value.
+ * @radio:			A pointer to the device struct.
+ */
+static unsigned int wl1273_fm_get_tx_ctune(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	u16 val;
+	int r;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	r = wl1273_fm_read_reg(core, WL1273_READ_FMANT_TUNE_VALUE, &val);
+	if (r) {
+		dev_err(dev, "%s: read error: %d\n", __func__, r);
+		goto out;
+	}
+
+out:
+	return val;
+}
+
+/**
+ * wl1273_fm_set_preemphasis() - Set the TX pre-emphasis value.
+ * @radio:			 A pointer to the device struct.
+ * @preemphasis:		 The new pre-amphasis value.
+ *
+ * Possible pre-emphasis values are: V4L2_PREEMPHASIS_DISABLED,
+ * V4L2_PREEMPHASIS_50_uS and V4L2_PREEMPHASIS_75_uS.
+ */
+static int wl1273_fm_set_preemphasis(struct wl1273_device *radio,
+				     unsigned int preemphasis)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+	u16 em;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	mutex_lock(&core->lock);
+
+	switch (preemphasis) {
+	case V4L2_PREEMPHASIS_DISABLED:
+		em = 1;
+		break;
+	case V4L2_PREEMPHASIS_50_uS:
+		em = 0;
+		break;
+	case V4L2_PREEMPHASIS_75_uS:
+		em = 2;
+		break;
+	default:
+		r = -EINVAL;
+		goto out;
+	}
+
+	r = wl1273_fm_write_cmd(core, WL1273_PREMPH_SET, em);
+	if (r)
+		goto out;
+
+	radio->preemphasis = preemphasis;
+
+out:
+	mutex_unlock(&core->lock);
+	return r;
+}
+
+static int wl1273_fm_rds_on(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	if (radio->rds_on)
+		return 0;
+
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+			WL1273_POWER_SET_FM | WL1273_POWER_SET_RDS);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+	if (r)
+		dev_err(radio->dev, "set freq fails: %d.\n", r);
+out:
+	return r;
+}
+
+static int wl1273_fm_rds_off(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	if (!radio->rds_on)
+		return 0;
+
+	radio->irq_flags &= ~WL1273_RDS_EVENT;
+
+	r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+	if (r)
+		goto out;
+
+	/* stop rds reception */
+	cancel_delayed_work(&radio->work);
+
+	/* Service pending read */
+	wake_up_interruptible(&radio->read_queue);
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, WL1273_POWER_SET_FM);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+	if (r)
+		dev_err(radio->dev, "set freq fails: %d.\n", r);
+out:
+	dev_dbg(radio->dev, "%s: exiting...\n", __func__);
+
+	return r;
+}
+
+static int wl1273_fm_set_rds(struct wl1273_device *radio, unsigned int new_mode)
+{
+	int r = 0;
+	struct wl1273_core *core = radio->core;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	if (new_mode == WL1273_RDS_RESET) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_CNTRL_SET, 1);
+		return r;
+	}
+
+	if (core->mode == WL1273_MODE_TX && new_mode == WL1273_RDS_OFF) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 0);
+	} else if (core->mode == WL1273_MODE_TX && new_mode == WL1273_RDS_ON) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 1);
+	} else if (core->mode == WL1273_MODE_RX && new_mode == WL1273_RDS_OFF) {
+		r = wl1273_fm_rds_off(radio);
+	} else if (core->mode == WL1273_MODE_RX && new_mode == WL1273_RDS_ON) {
+		r = wl1273_fm_rds_on(radio);
+	} else {
+		dev_err(radio->dev, "%s: Unknown mode: %d\n",
+			__func__, new_mode);
+		r = -EINVAL;
+	}
+
+	if (!r)
+		radio->rds_on = (new_mode == WL1273_RDS_ON) ? true : false;
+
+	return r;
+}
+
+static ssize_t wl1273_fm_fops_write(struct file *file, const char __user *buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->core->mode != WL1273_MODE_TX)
+		return count;
+
+	if (radio->rds_users == 0) {
+		dev_warn(radio->dev, "%s: RDS not on.\n", __func__);
+		return 0;
+	}
+
+	if (mutex_lock_interruptible(&radio->core->lock))
+		return -EINTR;
+	/*
+	 * Multiple processes can open the device, but only
+	 * one gets to write to it.
+	 */
+	if (radio->owner && radio->owner != file) {
+		r = -EBUSY;
+		goto out;
+	}
+	radio->owner = file;
+
+	/* Manual Mode */
+	if (count > 255)
+		val = 255;
+	else
+		val = count;
+
+	wl1273_fm_write_cmd(radio->core, WL1273_RDS_CONFIG_DATA_SET, val);
+
+	if (copy_from_user(radio->write_buf + 1, buf, val)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	dev_dbg(radio->dev, "Count: %d\n", val);
+	dev_dbg(radio->dev, "From user: \"%s\"\n", radio->write_buf);
+
+	radio->write_buf[0] = WL1273_RDS_DATA_SET;
+	wl1273_fm_write_data(radio->core, radio->write_buf, val + 1);
+
+	r = val;
+out:
+	mutex_unlock(&radio->core->lock);
+
+	return r;
+}
+
+static unsigned int wl1273_fm_fops_poll(struct file *file,
+					struct poll_table_struct *pts)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+
+	if (radio->owner && radio->owner != file)
+		return -EBUSY;
+
+	radio->owner = file;
+
+	if (core->mode == WL1273_MODE_RX) {
+		poll_wait(file, &radio->read_queue, pts);
+
+		if (radio->rd_index != radio->wr_index)
+			return POLLIN | POLLRDNORM;
+
+	} else if (core->mode == WL1273_MODE_TX) {
+		return POLLOUT | POLLWRNORM;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_fops_open(struct file *file)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (core->mode == WL1273_MODE_RX && radio->rds_on &&
+	    !radio->rds_users) {
+		dev_dbg(radio->dev, "%s: Mode: %d\n", __func__, core->mode);
+
+		if (mutex_lock_interruptible(&core->lock))
+			return -EINTR;
+
+		radio->irq_flags |= WL1273_RDS_EVENT;
+
+		r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+					radio->irq_flags);
+		if (r) {
+			mutex_unlock(&core->lock);
+			goto out;
+		}
+
+		radio->rds_users++;
+
+		mutex_unlock(&core->lock);
+	}
+out:
+	return r;
+}
+
+static int wl1273_fm_fops_release(struct file *file)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->rds_users > 0) {
+		radio->rds_users--;
+		if (radio->rds_users == 0) {
+			if (mutex_lock_interruptible(&core->lock))
+				return -EINTR;
+
+			radio->irq_flags &= ~WL1273_RDS_EVENT;
+
+			if (core->mode == WL1273_MODE_RX) {
+				r = wl1273_fm_write_cmd(core,
+							WL1273_INT_MASK_SET,
+							radio->irq_flags);
+				if (r) {
+					mutex_unlock(&core->lock);
+					goto out;
+				}
+			}
+			mutex_unlock(&core->lock);
+		}
+	}
+
+	if (file == radio->owner)
+		radio->owner = NULL;
+out:
+	return r;
+}
+
+static ssize_t wl1273_fm_fops_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *ppos)
+{
+	int r = 0;
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	unsigned int block_count = 0;
+	u16 val;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->core->mode != WL1273_MODE_RX)
+		return 0;
+
+	if (radio->rds_users == 0) {
+		dev_warn(radio->dev, "%s: RDS not on.\n", __func__);
+		return 0;
+	}
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	/*
+	 * Multiple processes can open the device, but only
+	 * one at a time gets read access.
+	 */
+	if (radio->owner && radio->owner != file) {
+		r = -EBUSY;
+		goto out;
+	}
+	radio->owner = file;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r) {
+		dev_err(radio->dev, "%s: Get RDS_SYNC fails.\n", __func__);
+		goto out;
+	} else if (val == 0) {
+		dev_info(radio->dev, "RDS_SYNC: Not synchronized\n");
+		r = -ENODATA;
+		goto out;
+	}
+
+	/* block if no new data available */
+	while (radio->wr_index == radio->rd_index) {
+		if (file->f_flags & O_NONBLOCK) {
+			r = -EWOULDBLOCK;
+			goto out;
+		}
+
+		dev_dbg(radio->dev, "%s: Wait for RDS data.\n", __func__);
+		if (wait_event_interruptible(radio->read_queue,
+					     radio->wr_index !=
+					     radio->rd_index) < 0) {
+			r = -EINTR;
+			goto out;
+		}
+	}
+
+	/* calculate block count from byte count */
+	count /= RDS_BLOCK_SIZE;
+
+	/* copy RDS blocks from the internal buffer and to user buffer */
+	while (block_count < count) {
+		if (radio->rd_index == radio->wr_index)
+			break;
+
+		/* always transfer complete RDS blocks */
+		if (copy_to_user(buf, &radio->buffer[radio->rd_index],
+				 RDS_BLOCK_SIZE))
+			break;
+
+		/* increment and wrap the read pointer */
+		radio->rd_index += RDS_BLOCK_SIZE;
+		if (radio->rd_index >= radio->buf_size)
+			radio->rd_index = 0;
+
+		/* increment counters */
+		block_count++;
+		buf += RDS_BLOCK_SIZE;
+		r += RDS_BLOCK_SIZE;
+	}
+
+out:
+	dev_dbg(radio->dev, "%s: exit\n", __func__);
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static const struct v4l2_file_operations wl1273_fops = {
+	.owner		= THIS_MODULE,
+	.read		= wl1273_fm_fops_read,
+	.write		= wl1273_fm_fops_write,
+	.poll		= wl1273_fm_fops_poll,
+	.ioctl		= video_ioctl2,
+	.open		= wl1273_fm_fops_open,
+	.release	= wl1273_fm_fops_release,
+};
+
+static int wl1273_fm_vidioc_querycap(struct file *file, void *priv,
+				     struct v4l2_capability *capability)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	strlcpy(capability->driver, WL1273_FM_DRIVER_NAME,
+		sizeof(capability->driver));
+	strlcpy(capability->card, "Texas Instruments Wl1273 FM Radio",
+		sizeof(capability->card));
+	strlcpy(capability->bus_info, radio->bus_type,
+		sizeof(capability->bus_info));
+
+	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
+		V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_AUDIO |
+		V4L2_CAP_RDS_CAPTURE | V4L2_CAP_MODULATOR |
+		V4L2_CAP_RDS_OUTPUT;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_g_input(struct file *file, void *priv,
+				    unsigned int *i)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	*i = 0;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_input(struct file *file, void *priv,
+				    unsigned int i)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (i != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * wl1273_fm_set_tx_power() -	Set the transmission power value.
+ * @core:			A pointer to the device struct.
+ * @power:			The new power value.
+ */
+static int wl1273_fm_set_tx_power(struct wl1273_device *radio, u16 power)
+{
+	int r;
+
+	if (radio->core->mode == WL1273_MODE_OFF ||
+	    radio->core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	mutex_lock(&radio->core->lock);
+
+	/* Convert the dBuV value to chip presentation */
+	r = wl1273_fm_write_cmd(radio->core, WL1273_POWER_LEV_SET, 122 - power);
+	if (r)
+		goto out;
+
+	radio->tx_power = power;
+
+out:
+	mutex_unlock(&radio->core->lock);
+	return r;
+}
+
+#define WL1273_SPACING_50kHz	1
+#define WL1273_SPACING_100kHz	2
+#define WL1273_SPACING_200kHz	4
+
+static int wl1273_fm_tx_set_spacing(struct wl1273_device *radio,
+				    unsigned int spacing)
+{
+	int r;
+
+	if (spacing == 0) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_100kHz);
+		radio->spacing = 100;
+	} else if (spacing - 50000 < 25000) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_50kHz);
+		radio->spacing = 50;
+	} else if (spacing - 100000 < 50000) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_100kHz);
+		radio->spacing = 100;
+	} else {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_200kHz);
+		radio->spacing = 200;
+	}
+
+	return r;
+}
+
+static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct wl1273_device *radio = ctrl->priv;
+	struct wl1273_core *core = radio->core;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	switch (ctrl->id) {
+	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+		ctrl->val = wl1273_fm_get_tx_ctune(radio);
+		break;
+
+	default:
+		dev_warn(radio->dev, "%s: Unknown IOCTL: %d\n",
+			 __func__, ctrl->id);
+		break;
+	}
+
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+#define WL1273_MUTE_SOFT_ENABLE    (1 << 0)
+#define WL1273_MUTE_AC             (1 << 1)
+#define WL1273_MUTE_HARD_LEFT      (1 << 2)
+#define WL1273_MUTE_HARD_RIGHT     (1 << 3)
+#define WL1273_MUTE_SOFT_FORCE     (1 << 4)
+
+static inline struct wl1273_device *to_radio(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct wl1273_device, ctrl_handler);
+}
+
+static int wl1273_fm_vidioc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct wl1273_device *radio = to_radio(ctrl);
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (mutex_lock_interruptible(&core->lock))
+			return -EINTR;
+
+		if (core->mode == WL1273_MODE_RX && ctrl->val)
+			r = wl1273_fm_write_cmd(core,
+						WL1273_MUTE_STATUS_SET,
+						WL1273_MUTE_HARD_LEFT |
+						WL1273_MUTE_HARD_RIGHT);
+		else if (core->mode == WL1273_MODE_RX)
+			r = wl1273_fm_write_cmd(core,
+						WL1273_MUTE_STATUS_SET, 0x0);
+		else if (core->mode == WL1273_MODE_TX && ctrl->val)
+			r = wl1273_fm_write_cmd(core, WL1273_MUTE, 1);
+		else if (core->mode == WL1273_MODE_TX)
+			r = wl1273_fm_write_cmd(core, WL1273_MUTE, 0);
+
+		mutex_unlock(&core->lock);
+		break;
+
+	case V4L2_CID_AUDIO_VOLUME:
+		if (ctrl->val == 0)
+			r = wl1273_fm_set_mode(radio, WL1273_MODE_OFF);
+		else
+			r =  core->set_volume(core, core->volume);
+		break;
+
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		r = wl1273_fm_set_preemphasis(radio, ctrl->val);
+		break;
+
+	case V4L2_CID_TUNE_POWER_LEVEL:
+		r = wl1273_fm_set_tx_power(radio, ctrl->val);
+		break;
+
+	default:
+		dev_warn(radio->dev, "%s: Unknown IOCTL: %d\n",
+			 __func__, ctrl->id);
+		break;
+	}
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_audio(struct file *file, void *priv,
+				    struct v4l2_audio *audio)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (audio->index > 1)
+		return -EINVAL;
+
+	strlcpy(audio->name, "Radio", sizeof(audio->name));
+	audio->capability = V4L2_AUDCAP_STEREO;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_audio(struct file *file, void *priv,
+				    struct v4l2_audio *audio)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (audio->index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#define WL1273_RDS_NOT_SYNCHRONIZED 0
+#define WL1273_RDS_SYNCHRONIZED 1
+
+static int wl1273_fm_vidioc_g_tuner(struct file *file, void *priv,
+				    struct v4l2_tuner *tuner)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (tuner->index > 0)
+		return -EINVAL;
+
+	strlcpy(tuner->name, WL1273_FM_DRIVER_NAME, sizeof(tuner->name));
+	tuner->type = V4L2_TUNER_RADIO;
+
+	tuner->rangelow	= WL1273_FREQ(WL1273_BAND_JAPAN_LOW);
+	tuner->rangehigh = WL1273_FREQ(WL1273_BAND_OTHER_HIGH);
+
+	tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_RDS |
+		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS_BLOCK_IO;
+
+	if (radio->stereo)
+		tuner->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		tuner->audmode = V4L2_TUNER_MODE_MONO;
+
+	if (core->mode != WL1273_MODE_RX)
+		return 0;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_read_reg(core, WL1273_STEREO_GET, &val);
+	if (r)
+		goto out;
+
+	if (val == 1)
+		tuner->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+
+	r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &val);
+	if (r)
+		goto out;
+
+	tuner->signal = (s16) val;
+	dev_dbg(radio->dev, "Signal: %d\n", tuner->signal);
+
+	tuner->afc = 0;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r)
+		goto out;
+
+	if (val == WL1273_RDS_SYNCHRONIZED)
+		tuner->rxsubchans |= V4L2_TUNER_SUB_RDS;
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_s_tuner(struct file *file, void *priv,
+				    struct v4l2_tuner *tuner)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	dev_dbg(radio->dev, "tuner->index: %d\n", tuner->index);
+	dev_dbg(radio->dev, "tuner->name: %s\n", tuner->name);
+	dev_dbg(radio->dev, "tuner->capability: 0x%04x\n", tuner->capability);
+	dev_dbg(radio->dev, "tuner->rxsubchans: 0x%04x\n", tuner->rxsubchans);
+	dev_dbg(radio->dev, "tuner->rangelow: %d\n", tuner->rangelow);
+	dev_dbg(radio->dev, "tuner->rangehigh: %d\n", tuner->rangehigh);
+
+	if (tuner->index > 0)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_RX);
+	if (r)
+		goto out;
+
+	if (tuner->rxsubchans & V4L2_TUNER_SUB_RDS)
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_ON);
+	else
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_OFF);
+
+	if (r)
+		dev_warn(radio->dev, "%s: RDS fails: %d\n", __func__, r);
+
+	if (tuner->audmode == V4L2_TUNER_MODE_MONO) {
+		r = wl1273_fm_write_cmd(core, WL1273_MOST_MODE_SET,
+					WL1273_RX_MONO);
+		if (r < 0) {
+			dev_warn(radio->dev, "%s: MOST_MODE fails: %d\n",
+				 __func__, r);
+			goto out;
+		}
+		radio->stereo = false;
+	} else if (tuner->audmode == V4L2_TUNER_MODE_STEREO) {
+		r = wl1273_fm_write_cmd(core, WL1273_MOST_MODE_SET,
+					WL1273_RX_STEREO);
+		if (r < 0) {
+			dev_warn(radio->dev, "%s: MOST_MODE fails: %d\n",
+				 __func__, r);
+			goto out;
+		}
+		radio->stereo = true;
+	} else {
+		dev_err(radio->dev, "%s: tuner->audmode: %d\n",
+			 __func__, tuner->audmode);
+		r = -EINVAL;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *freq)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	freq->type = V4L2_TUNER_RADIO;
+	freq->frequency = WL1273_FREQ(wl1273_fm_get_freq(radio));
+
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *freq)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s: %d\n", __func__, freq->frequency);
+
+	if (freq->type != V4L2_TUNER_RADIO) {
+		dev_dbg(radio->dev,
+			"freq->type != V4L2_TUNER_RADIO: %d\n", freq->type);
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	if (core->mode == WL1273_MODE_RX) {
+		dev_dbg(radio->dev, "freq: %d\n", freq->frequency);
+
+		r = wl1273_fm_set_rx_freq(radio,
+					  WL1273_INV_FREQ(freq->frequency));
+		if (r)
+			dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+				 ": set frequency failed with %d\n", r);
+	} else {
+		r = wl1273_fm_set_tx_freq(radio,
+					  WL1273_INV_FREQ(freq->frequency));
+		if (r)
+			dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+				 ": set frequency failed with %d\n", r);
+	}
+
+	mutex_unlock(&core->lock);
+
+	dev_dbg(radio->dev, "wl1273_vidioc_s_frequency: DONE\n");
+	return r;
+}
+
+#define WL1273_DEFAULT_SEEK_LEVEL	7
+
+static int wl1273_fm_vidioc_s_hw_freq_seek(struct file *file, void *priv,
+					   struct v4l2_hw_freq_seek *seek)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (seek->tuner != 0 || seek->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_RX);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_tx_set_spacing(radio, seek->spacing);
+	if (r)
+		dev_warn(radio->dev, "HW seek failed: %d\n", r);
+
+	r = wl1273_fm_set_seek(radio, seek->wrap_around, seek->seek_upward,
+			       WL1273_DEFAULT_SEEK_LEVEL);
+	if (r)
+		dev_warn(radio->dev, "HW seek failed: %d\n", r);
+
+out:
+	mutex_unlock(&core->lock);
+	return r;
+}
+
+static int wl1273_fm_vidioc_s_modulator(struct file *file, void *priv,
+					struct v4l2_modulator *modulator)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (modulator->index > 0)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_TX);
+	if (r)
+		goto out;
+
+	if (modulator->txsubchans & V4L2_TUNER_SUB_RDS)
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_ON);
+	else
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_OFF);
+
+	if (modulator->txsubchans & V4L2_TUNER_SUB_MONO)
+		r = wl1273_fm_write_cmd(core, WL1273_MONO_SET, WL1273_TX_MONO);
+	else
+		r = wl1273_fm_write_cmd(core, WL1273_MONO_SET,
+					WL1273_RX_STEREO);
+	if (r < 0)
+		dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+			 "MONO_SET fails: %d\n", r);
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_modulator(struct file *file, void *priv,
+					struct v4l2_modulator *modulator)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	strlcpy(modulator->name, WL1273_FM_DRIVER_NAME,
+		sizeof(modulator->name));
+
+	modulator->rangelow = WL1273_FREQ(WL1273_BAND_JAPAN_LOW);
+	modulator->rangehigh = WL1273_FREQ(WL1273_BAND_OTHER_HIGH);
+
+	modulator->capability =  V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_RDS |
+		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS_BLOCK_IO;
+
+	if (core->mode != WL1273_MODE_TX)
+		return 0;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_read_reg(core, WL1273_MONO_SET, &val);
+	if (r)
+		goto out;
+
+	if (val == WL1273_TX_STEREO)
+		modulator->txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		modulator->txsubchans = V4L2_TUNER_SUB_MONO;
+
+	if (radio->rds_on)
+		modulator->txsubchans |= V4L2_TUNER_SUB_RDS;
+out:
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_log_status(struct file *file, void *priv)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	u16 val;
+	int r;
+
+	dev_info(dev, DRIVER_DESC);
+
+	if (core->mode == WL1273_MODE_OFF) {
+		dev_info(dev, "Mode: Off\n");
+		return 0;
+	}
+
+	if (core->mode == WL1273_MODE_SUSPENDED) {
+		dev_info(dev, "Mode: Suspended\n");
+		return 0;
+	}
+
+	r = wl1273_fm_read_reg(core, WL1273_ASIC_ID_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get ASIC_ID fails.\n", __func__);
+	else
+		dev_info(dev, "ASIC_ID: 0x%04x\n", val);
+
+	r = wl1273_fm_read_reg(core, WL1273_ASIC_VER_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get ASIC_VER fails.\n", __func__);
+	else
+		dev_info(dev, "ASIC Version: 0x%04x\n", val);
+
+	r = wl1273_fm_read_reg(core, WL1273_FIRM_VER_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get FIRM_VER fails.\n", __func__);
+	else
+		dev_info(dev, "FW version: %d(0x%04x)\n", val, val);
+
+	r = wl1273_fm_read_reg(core, WL1273_BAND_SET, &val);
+	if (r)
+		dev_err(dev, "%s: Get BAND fails.\n", __func__);
+	else
+		dev_info(dev, "BAND: %d\n", val);
+
+	if (core->mode == WL1273_MODE_TX) {
+		r = wl1273_fm_read_reg(core, WL1273_PUPD_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get PUPD fails.\n", __func__);
+		else
+			dev_info(dev, "PUPD: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get CHANL fails.\n", __func__);
+		else
+			dev_info(dev, "Tx frequency: %dkHz\n", val*10);
+	} else if (core->mode == WL1273_MODE_RX) {
+		int bf = radio->rangelow;
+
+		r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get FREQ fails.\n", __func__);
+		else
+			dev_info(dev, "RX Frequency: %dkHz\n", bf + val*50);
+
+		r = wl1273_fm_read_reg(core, WL1273_MOST_MODE_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get MOST_MODE fails.\n",
+				__func__);
+		else if (val == 0)
+			dev_info(dev, "MOST_MODE: Stereo according to blend\n");
+		else if (val == 1)
+			dev_info(dev, "MOST_MODE: Force mono output\n");
+		else
+			dev_info(dev, "MOST_MODE: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_MOST_BLEND_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get MOST_BLEND fails.\n", __func__);
+		else if (val == 0)
+			dev_info(dev,
+				 "MOST_BLEND: Switched blend & hysteresis.\n");
+		else if (val == 1)
+			dev_info(dev, "MOST_BLEND: Soft blend.\n");
+		else
+			dev_info(dev, "MOST_BLEND: Unexpected val: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_STEREO_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get STEREO fails.\n", __func__);
+		else if (val == 0)
+			dev_info(dev, "STEREO: Not detected\n");
+		else if (val == 1)
+			dev_info(dev, "STEREO: Detected\n");
+		else
+			dev_info(dev, "STEREO: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get RSSI_LVL fails.\n", __func__);
+		else
+			dev_info(dev, "RX signal strength: %d\n", (s16) val);
+
+		r = wl1273_fm_read_reg(core, WL1273_POWER_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get POWER fails.\n", __func__);
+		else
+			dev_info(dev, "POWER: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_INT_MASK_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get INT_MASK fails.\n", __func__);
+		else
+			dev_info(dev, "INT_MASK: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get RDS_SYNC fails.\n",
+				__func__);
+		else if (val == 0)
+			dev_info(dev, "RDS_SYNC: Not synchronized\n");
+
+		else if (val == 1)
+			dev_info(dev, "RDS_SYNC: Synchronized\n");
+		else
+			dev_info(dev, "RDS_SYNC: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_I2S_MODE_CONFIG_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get I2S_MODE_CONFIG fails.\n",
+				__func__);
+		else
+			dev_info(dev, "I2S_MODE_CONFIG: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_VOLUME_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get VOLUME fails.\n", __func__);
+		else
+			dev_info(dev, "VOLUME: 0x%04x\n", val);
+	}
+
+	return 0;
+}
+
+static void wl1273_vdev_release(struct video_device *dev)
+{
+}
+
+static const struct v4l2_ctrl_ops wl1273_ctrl_ops = {
+	.s_ctrl = wl1273_fm_vidioc_s_ctrl,
+	.g_volatile_ctrl = wl1273_fm_g_volatile_ctrl,
+};
+
+static const struct v4l2_ioctl_ops wl1273_ioctl_ops = {
+	.vidioc_querycap	= wl1273_fm_vidioc_querycap,
+	.vidioc_g_input		= wl1273_fm_vidioc_g_input,
+	.vidioc_s_input		= wl1273_fm_vidioc_s_input,
+	.vidioc_g_audio		= wl1273_fm_vidioc_g_audio,
+	.vidioc_s_audio		= wl1273_fm_vidioc_s_audio,
+	.vidioc_g_tuner		= wl1273_fm_vidioc_g_tuner,
+	.vidioc_s_tuner		= wl1273_fm_vidioc_s_tuner,
+	.vidioc_g_frequency	= wl1273_fm_vidioc_g_frequency,
+	.vidioc_s_frequency	= wl1273_fm_vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek	= wl1273_fm_vidioc_s_hw_freq_seek,
+	.vidioc_g_modulator	= wl1273_fm_vidioc_g_modulator,
+	.vidioc_s_modulator	= wl1273_fm_vidioc_s_modulator,
+	.vidioc_log_status      = wl1273_fm_vidioc_log_status,
+};
+
+static struct video_device wl1273_viddev_template = {
+	.fops			= &wl1273_fops,
+	.ioctl_ops		= &wl1273_ioctl_ops,
+	.name			= WL1273_FM_DRIVER_NAME,
+	.release		= wl1273_vdev_release,
+};
+
+static int wl1273_fm_radio_remove(struct platform_device *pdev)
+{
+	struct wl1273_device *radio = platform_get_drvdata(pdev);
+	struct wl1273_core *core = radio->core;
+
+	dev_info(&pdev->dev, "%s.\n", __func__);
+
+	free_irq(core->client->irq, radio);
+	core->pdata->free_resources();
+
+	v4l2_ctrl_handler_free(&radio->ctrl_handler);
+	video_unregister_device(&radio->videodev);
+	v4l2_device_unregister(&radio->v4l2dev);
+	kfree(radio->buffer);
+	kfree(radio->write_buf);
+	kfree(radio);
+
+	return 0;
+}
+
+static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev)
+{
+	struct wl1273_core **core = pdev->dev.platform_data;
+	struct wl1273_device *radio;
+	struct v4l2_ctrl *ctrl;
+	int r = 0;
+
+	pr_debug("%s\n", __func__);
+
+	if (!core) {
+		dev_err(&pdev->dev, "No platform data.\n");
+		r = -EINVAL;
+		goto pdata_err;
+	}
+
+	radio = kzalloc(sizeof(*radio), GFP_KERNEL);
+	if (!radio) {
+		r = -ENOMEM;
+		goto pdata_err;
+	}
+
+	/* RDS buffer allocation */
+	radio->buf_size = rds_buf * RDS_BLOCK_SIZE;
+	radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
+	if (!radio->buffer) {
+		pr_err("Cannot allocate memory for RDS buffer.\n");
+		r = -ENOMEM;
+		goto err_kmalloc;
+	}
+
+	radio->core = *core;
+	radio->irq_flags = WL1273_IRQ_MASK;
+	radio->dev = &radio->core->client->dev;
+	radio->rds_on = false;
+	radio->core->mode = WL1273_MODE_OFF;
+	radio->tx_power = 118;
+	radio->core->audio_mode = WL1273_AUDIO_ANALOG;
+	radio->band = WL1273_BAND_OTHER;
+	radio->core->i2s_mode = WL1273_I2S_DEF_MODE;
+	radio->core->channel_number = 2;
+	radio->core->volume = WL1273_DEFAULT_VOLUME;
+	radio->rx_frequency = WL1273_BAND_OTHER_LOW;
+	radio->tx_frequency = WL1273_BAND_OTHER_HIGH;
+	radio->rangelow = WL1273_BAND_OTHER_LOW;
+	radio->rangehigh = WL1273_BAND_OTHER_HIGH;
+	radio->stereo = true;
+	radio->bus_type = "I2C";
+
+	radio->core->write = wl1273_fm_write_cmd;
+	radio->core->set_audio = wl1273_fm_set_audio;
+	radio->core->set_volume = wl1273_fm_set_volume;
+
+	if (radio->core->pdata->request_resources) {
+		r = radio->core->pdata->request_resources(radio->core->client);
+		if (r) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": Cannot get platform data\n");
+			goto err_resources;
+		}
+
+		dev_dbg(radio->dev, "irq: %d\n", radio->core->client->irq);
+
+		r = request_threaded_irq(radio->core->client->irq, NULL,
+					 wl1273_fm_irq_thread_handler,
+					 IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+					 "wl1273-fm", radio);
+		if (r < 0) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": Unable to register IRQ handler: %d\n", r);
+			goto err_request_irq;
+		}
+	} else {
+		dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ"
+			" not configured");
+		r = -EINVAL;
+		goto err_resources;
+	}
+
+	init_completion(&radio->busy);
+	init_waitqueue_head(&radio->read_queue);
+
+	radio->write_buf = kmalloc(256, GFP_KERNEL);
+	if (!radio->write_buf) {
+		r = -ENOMEM;
+		goto write_buf_err;
+	}
+
+	radio->dev = &pdev->dev;
+	radio->v4l2dev.ctrl_handler = &radio->ctrl_handler;
+	radio->rds_users = 0;
+
+	r = v4l2_device_register(&pdev->dev, &radio->v4l2dev);
+	if (r) {
+		dev_err(&pdev->dev, "Cannot register v4l2_device.\n");
+		goto device_register_err;
+	}
+
+	/* V4L2 configuration */
+	memcpy(&radio->videodev, &wl1273_viddev_template,
+	       sizeof(wl1273_viddev_template));
+
+	radio->videodev.v4l2_dev = &radio->v4l2dev;
+
+	v4l2_ctrl_handler_init(&radio->ctrl_handler, 6);
+
+	/* add in ascending ID order */
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_AUDIO_VOLUME, 0, WL1273_MAX_VOLUME, 1,
+			  WL1273_DEFAULT_VOLUME);
+
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+
+	v4l2_ctrl_new_std_menu(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			       V4L2_CID_TUNE_PREEMPHASIS,
+			       V4L2_PREEMPHASIS_75_uS, 0x03,
+			       V4L2_PREEMPHASIS_50_uS);
+
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_TUNE_POWER_LEVEL, 91, 122, 1, 118);
+
+	ctrl = v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+				 V4L2_CID_TUNE_ANTENNA_CAPACITOR,
+				 0, 255, 1, 255);
+	if (ctrl)
+		ctrl->is_volatile = 1;
+
+	if (radio->ctrl_handler.error) {
+		r = radio->ctrl_handler.error;
+		dev_err(&pdev->dev, "Ctrl handler error: %d\n", r);
+		goto handler_init_err;
+	}
+
+	video_set_drvdata(&radio->videodev, radio);
+	platform_set_drvdata(pdev, radio);
+
+	/* register video device */
+	r = video_register_device(&radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (r) {
+		dev_err(&pdev->dev, WL1273_FM_DRIVER_NAME
+			": Could not register video device\n");
+		goto handler_init_err;
+	}
+
+	return 0;
+
+handler_init_err:
+	v4l2_ctrl_handler_free(&radio->ctrl_handler);
+	v4l2_device_unregister(&radio->v4l2dev);
+device_register_err:
+	kfree(radio->write_buf);
+write_buf_err:
+	free_irq(radio->core->client->irq, radio);
+err_request_irq:
+	radio->core->pdata->free_resources();
+err_resources:
+	kfree(radio->buffer);
+err_kmalloc:
+	kfree(radio);
+pdata_err:
+	return r;
+}
+
+MODULE_ALIAS("platform:wl1273_fm_radio");
+
+static struct platform_driver wl1273_fm_radio_driver = {
+	.probe		= wl1273_fm_radio_probe,
+	.remove		= __devexit_p(wl1273_fm_radio_remove),
+	.driver		= {
+		.name	= "wl1273_fm_radio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wl1273_fm_module_init(void)
+{
+	pr_info("%s\n", __func__);
+	return platform_driver_register(&wl1273_fm_radio_driver);
+}
+module_init(wl1273_fm_module_init);
+
+static void __exit wl1273_fm_module_exit(void)
+{
+	flush_scheduled_work();
+	platform_driver_unregister(&wl1273_fm_radio_driver);
+	pr_info(DRIVER_DESC ", Exiting.\n");
+}
+module_exit(wl1273_fm_module_exit);
+
+MODULE_AUTHOR("Matti Aaltonen <matti.j.aaltonen@nokia.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 4c8b8698053c986f5f5249878eab70cb028a1023 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri, 26 Nov 2010 14:06:35 -0300
Subject: [media] rc: ir-lirc-codec: fix potential integer overflow

'n' may be bigger than MAX_INT*sizeof(int), if so checking of truncated
(int)(n/sizeof(int)) for LIRCBUF_SIZE overflow and then using nontruncated 'count'
doesn't make sense.  Also n may be up to sizeof(int)-1 bytes bigger than expected,
so check value of (n % sizeof(int)) too.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/ir-lirc-codec.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 1e87ee8e5c99..f011c5d9dea1 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -100,7 +100,8 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 	struct lirc_codec *lirc;
 	struct rc_dev *dev;
 	int *txbuf; /* buffer with values to transmit */
-	int ret = 0, count;
+	int ret = 0;
+	size_t count;
 
 	lirc = lirc_get_pdata(file);
 	if (!lirc)
@@ -110,7 +111,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 		return -EINVAL;
 
 	count = n / sizeof(int);
-	if (count > LIRCBUF_SIZE || count % 2 == 0)
+	if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0)
 		return -EINVAL;
 
 	txbuf = memdup_user(buf, n);
-- 
cgit v1.2.3


From c59a9bfabfc2a6359f046652c6bfa0a82fb17a05 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 7 Dec 2010 15:50:09 -0300
Subject: [media] media: fix em28xx build, needs hardirq.h

Fix em28xx build by adding hardirq.h header file:

drivers/media/video/em28xx/em28xx-vbi.c:49: error: implicit declaration of function 'in_interrupt'

Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-vbi.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 7f1c4a2173b6..2b4c9cba2d67 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -23,6 +23,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 
 #include "em28xx.h"
-- 
cgit v1.2.3


From 75aecc3af22ae9063c96457d530f281a1e2d3276 Mon Sep 17 00:00:00 2001
From: Malcolm Priestley <tvboxspy@gmail.com>
Date: Tue, 7 Dec 2010 19:49:24 -0300
Subject: [media] DM04/QQBOX Frontend attach change

On Fri, 2010-12-03 at 09:32 -0200, Mauro Carvalho Chehab wrote:
> Em 27-11-2010 11:13, Malcolm Priestley escreveu:
> > Driver Version v1.73 - Frontend attach change.
> > To stop double rc registration in multi tuner environment or firmware change.
> >
> > Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
> >
> >
> > +static int lme_name(struct dvb_usb_adapter *adap)
> > +{
> > +	struct lme2510_state *st = adap->dev->priv;
> > +	const char *desc = adap->dev->desc->name;
> > +	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
> > +	char *name = adap->fe->ops.info.name;
> > +
> > +	strcpy(name, desc);
> > +	strcat(name, fe_name[st->tuner_config]);
>
> Please use, instead, strlcpy/strlcat, to avoid writing outside the buffer size.
>

Driver Version v1.74
Amended patch with change to strlcpy/strlcat.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/lmedm04.c | 133 +++++++++++++++++++++++-------------
 1 file changed, 86 insertions(+), 47 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index 1455c238b01b..9eea4188303b 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -584,6 +584,7 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap)
 	ret = lme2510_int_read(adap);
 	if (ret < 0) {
 		rc_unregister_device(rc);
+		info("INT Unable to start Interupt Service");
 		return -ENODEV;
 	}
 
@@ -674,7 +675,7 @@ static void lme_coldreset(struct usb_device *dev)
 	return;
 }
 
-static void lme_firmware_switch(struct usb_device *udev, int cold)
+static int lme_firmware_switch(struct usb_device *udev, int cold)
 {
 	const struct firmware *fw = NULL;
 	char lme2510c_s7395[] = "dvb-usb-lme2510c-s7395.fw";
@@ -685,7 +686,7 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 	cold = (cold > 0) ? (cold & 1) : 0;
 
 	if (udev->descriptor.idProduct == 0x1122)
-		return;
+		return 0;
 
 	switch (dvb_usb_lme2510_firmware) {
 	case 0:
@@ -715,10 +716,12 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 
 	release_firmware(fw);
 
-	if (cold)
+	if (cold) {
 		lme_coldreset(udev);
+		return -ENODEV;
+	}
 
-	return;
+	return ret;
 }
 
 static int lme2510_kill_urb(struct usb_data_stream *stream)
@@ -786,45 +789,43 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
 	return (ret < 0) ? -ENODEV : 0;
 }
 
+static int lme_name(struct dvb_usb_adapter *adap)
+{
+	struct lme2510_state *st = adap->dev->priv;
+	const char *desc = adap->dev->desc->name;
+	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
+	char *name = adap->fe->ops.info.name;
+
+	strlcpy(name, desc, 128);
+	strlcat(name, fe_name[st->tuner_config], 128);
+
+	return 0;
+}
+
 static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	int ret = 0;
 	struct lme2510_state *st = adap->dev->priv;
 
-	/* Interupt Start  */
-	ret = lme2510_int_service(adap);
-	if (ret < 0) {
-		info("INT Unable to start Interupt Service");
-		return -ENODEV;
-	}
+	int ret = 0;
 
 	st->i2c_talk_onoff = 1;
-	st->i2c_gate = 4;
 
+	st->i2c_gate = 4;
 	adap->fe = dvb_attach(tda10086_attach, &tda10086_config,
 		&adap->dev->i2c_adap);
 
 	if (adap->fe) {
 		info("TUN Found Frontend TDA10086");
-		memcpy(&adap->fe->ops.info.name,
-				&"DM04_LG_TDQY-P001F DVB-S", 24);
-		adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
 		st->i2c_tuner_gate_w = 4;
 		st->i2c_tuner_gate_r = 4;
 		st->i2c_tuner_addr = 0xc0;
-		if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
-			&adap->dev->i2c_adap, 1)) {
-			info("TUN TDA8263 Found");
-			st->tuner_config = TUNER_LG;
-			if (dvb_usb_lme2510_firmware != 1) {
-				dvb_usb_lme2510_firmware = 1;
-				lme_firmware_switch(adap->dev->udev, 1);
-			} else /*stops LG/Sharp multi tuner problems*/
-				dvb_usb_lme2510_firmware = 0;
-			return 0;
-		}
-		kfree(adap->fe);
-		adap->fe = NULL;
+		st->tuner_config = TUNER_LG;
+		if (dvb_usb_lme2510_firmware != 1) {
+			dvb_usb_lme2510_firmware = 1;
+			ret = lme_firmware_switch(adap->dev->udev, 1);
+		} else /*stops LG/Sharp multi tuner problems*/
+			dvb_usb_lme2510_firmware = 0;
+		goto end;
 	}
 
 	st->i2c_gate = 5;
@@ -833,28 +834,64 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 
 	if (adap->fe) {
 		info("FE Found Stv0288");
-		memcpy(&adap->fe->ops.info.name,
-				&"DM04_SHARP:BS2F7HZ7395", 22);
-		adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
 		st->i2c_tuner_gate_w = 4;
 		st->i2c_tuner_gate_r = 5;
 		st->i2c_tuner_addr = 0xc0;
-		if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
-					&adap->dev->i2c_adap)) {
-			st->tuner_config = TUNER_S7395;
-			info("TUN Sharp IX2505V silicon tuner");
-			if (dvb_usb_lme2510_firmware != 0) {
-				dvb_usb_lme2510_firmware = 0;
-				lme_firmware_switch(adap->dev->udev, 1);
-			}
-			return 0;
+		st->tuner_config = TUNER_S7395;
+		if (dvb_usb_lme2510_firmware != 0) {
+			dvb_usb_lme2510_firmware = 0;
+			ret = lme_firmware_switch(adap->dev->udev, 1);
 		}
+	} else {
+		info("DM04 Not Supported");
+		return -ENODEV;
+	}
+
+end:	if (ret) {
 		kfree(adap->fe);
 		adap->fe = NULL;
+		return -ENODEV;
 	}
 
-	info("DM04 Not Supported");
-	return -ENODEV;
+	adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
+	ret = lme_name(adap);
+
+	return ret;
+}
+
+static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
+{
+	struct lme2510_state *st = adap->dev->priv;
+	char *tun_msg[] = {"", "TDA8263", "IX2505V"};
+	int ret = 0;
+
+	switch (st->tuner_config) {
+	case TUNER_LG:
+		if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap, 1))
+			ret = st->tuner_config;
+		break;
+	case TUNER_S7395:
+		if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
+			&adap->dev->i2c_adap))
+			ret = st->tuner_config;
+		break;
+	default:
+		break;
+	}
+
+	if (ret)
+		info("TUN Found %s tuner", tun_msg[ret]);
+	else {
+		info("TUN No tuner found --- reseting device");
+		lme_coldreset(adap->dev->udev);
+		return -ENODEV;
+	}
+
+	/* Start the Interupt & Remote*/
+	ret = lme2510_int_service(adap);
+
+	return ret;
 }
 
 static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
@@ -937,6 +974,7 @@ static struct dvb_usb_device_properties lme2510_properties = {
 		{
 			.streaming_ctrl   = lme2510_streaming_ctrl,
 			.frontend_attach  = dm04_lme2510_frontend_attach,
+			.tuner_attach = dm04_lme2510_tuner,
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
@@ -957,7 +995,7 @@ static struct dvb_usb_device_properties lme2510_properties = {
 	.generic_bulk_ctrl_endpoint = 0,
 	.num_device_descs = 1,
 	.devices = {
-		{   "DM04 LME2510 DVB-S USB 2.0",
+		{   "DM04_LME2510_DVB-S",
 			{ &lme2510_table[0], NULL },
 			},
 
@@ -975,6 +1013,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
 		{
 			.streaming_ctrl   = lme2510_streaming_ctrl,
 			.frontend_attach  = dm04_lme2510_frontend_attach,
+			.tuner_attach = dm04_lme2510_tuner,
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
@@ -995,7 +1034,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
 	.generic_bulk_ctrl_endpoint = 0,
 	.num_device_descs = 1,
 	.devices = {
-		{   "DM04 LME2510C USB2.0",
+		{   "DM04_LME2510C_DVB-S",
 			{ &lme2510_table[1], NULL },
 			},
 	}
@@ -1041,7 +1080,7 @@ void lme2510_exit(struct usb_interface *intf)
 }
 
 static struct usb_driver lme2510_driver = {
-	.name		= "LME2510C_DVBS",
+	.name		= "LME2510C_DVB-S",
 	.probe		= lme2510_probe,
 	.disconnect	= lme2510_exit,
 	.id_table	= lme2510_table,
@@ -1069,6 +1108,6 @@ module_init(lme2510_module_init);
 module_exit(lme2510_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
-MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.71");
+MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
+MODULE_VERSION("1.74");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 2a72b39e516bf772e707d5a080d5d07b1c8ac0c0 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Fri, 10 Dec 2010 09:39:34 -0300
Subject: [media] zoran: bit-wise vs logical and

zr->frame_num is a counter and && was intended here instead of &.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran/zoran_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c
index b02007e42150..e8a27844bf39 100644
--- a/drivers/media/video/zoran/zoran_device.c
+++ b/drivers/media/video/zoran/zoran_device.c
@@ -1523,7 +1523,7 @@ zoran_irq (int             irq,
 		    zr->JPEG_missed > 25 ||
 		    zr->JPEG_error == 1	||
 		    ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
-		     (zr->frame_num & (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
+		     (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
 			error_handler(zr, astat, stat);
 		}
 
-- 
cgit v1.2.3


From c3353330508aee4390442df2d7f6ce0ef5006185 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 17 Dec 2010 06:40:50 -0300
Subject: [media] media: fsl-viu: fix support for streaming with mmap method

Streaming using mmap didn't work in the VIU driver. We need to
start/stop DMA in streamon/streamoff and free the buffers on
release. Add appropriate driver extension now.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/fsl-viu.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index b8faff2dd711..693e9c07e3f4 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -915,6 +915,8 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 	if (fh->type != i)
 		return -EINVAL;
 
+	viu_start_dma(fh->dev);
+
 	return videobuf_streamon(&fh->vb_vidq);
 }
 
@@ -927,6 +929,8 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 	if (fh->type != i)
 		return -EINVAL;
 
+	viu_stop_dma(fh->dev);
+
 	return videobuf_streamoff(&fh->vb_vidq);
 }
 
@@ -1331,6 +1335,7 @@ static int viu_release(struct file *file)
 
 	viu_stop_dma(dev);
 	videobuf_stop(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vidq);
 
 	kfree(fh);
 
-- 
cgit v1.2.3


From 10304ca65f8871ad9f6725a7480522034184f55f Mon Sep 17 00:00:00 2001
From: Sam Doshi <sam@metal-fish.co.uk>
Date: Sat, 18 Dec 2010 12:58:54 -0300
Subject: [media] drivers:media:dvb: add USB PIDs for Elgato EyeTV Sat

Adds USB PIDs for the Elgato EyeTV Sat device.
This device is a clone of the Terratec S7.

Signed-off-by: Sam Doshi <sam@metal-fish.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/az6027.c      | 7 ++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 9a7837fcfd7f..57e2444d51ab 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -1089,6 +1089,7 @@ static struct usb_device_id az6027_usb_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V2) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) },
+	{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) },
 	{ },
 };
 
@@ -1134,7 +1135,7 @@ static struct dvb_usb_device_properties az6027_properties = {
 
 	.i2c_algo         = &az6027_i2c_algo,
 
-	.num_device_descs = 5,
+	.num_device_descs = 6,
 	.devices = {
 		{
 			.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
@@ -1156,6 +1157,10 @@ static struct dvb_usb_device_properties az6027_properties = {
 			.name = "Technisat SkyStar USB 2 HD CI",
 			.cold_ids = { &az6027_usb_table[4], NULL },
 			.warm_ids = { NULL },
+		}, {
+			.name = "Elgato EyeTV Sat",
+			.cold_ids = { &az6027_usb_table[5], NULL },
+			.warm_ids = { NULL },
 		},
 		{ NULL },
 	}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 192a40ce583d..1a6310b61923 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -301,6 +301,7 @@
 #define USB_PID_ELGATO_EYETV_DIVERSITY			0x0011
 #define USB_PID_ELGATO_EYETV_DTT			0x0021
 #define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
+#define USB_PID_ELGATO_EYETV_SAT			0x002a
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
 #define USB_PID_FRIIO_WHITE				0x0001
-- 
cgit v1.2.3


From ef330dc2e794c932fcbde3f8abd3f12780d78b47 Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sat, 18 Dec 2010 19:05:02 -0300
Subject: [media] saa7164: Remove pointless conditional and save a few bytes in
 saa7164_downloadfirmware()

Hi,

release_firmware() just does nothing if passed a NULL pointer. So there's
no reason to test before the call in
saa7164-fw.c::saa7164_downloadfirmware().

Removing the pointless conditional also saves a few bytes.
before:
   text    data     bss     dec     hex filename
   7943     112    2144   10199    27d7 drivers/media/video/saa7164/saa7164-fw.o
after:
   text    data     bss     dec     hex filename
   7931     112    2136   10179    27c3 drivers/media/video/saa7164/saa7164-fw.o

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-fw.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index 22b02323dca9..ebed6f786a23 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -608,8 +608,6 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 	ret = 0;
 
 out:
-	if (fw)
-		release_firmware(fw);
-
+	release_firmware(fw);
 	return ret;
 }
-- 
cgit v1.2.3


From dcd745b723efc875ec5a8f44be028bd0704b12d6 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 20 Dec 2010 09:53:16 -0300
Subject: [media] timblogiw: too large value for strncpy()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is a copy and paste error.  It should be using sizeof(cap->driver)
instead of sizeof(cap->card).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Richard Rojförs <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/timblogiw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index cf48aa934b8c..700c08aca6c6 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -241,7 +241,7 @@ static int timblogiw_querycap(struct file *file, void  *priv,
 	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
 	memset(cap, 0, sizeof(*cap));
 	strncpy(cap->card, TIMBLOGIWIN_NAME, sizeof(cap->card)-1);
-	strncpy(cap->driver, DRIVER_NAME, sizeof(cap->card)-1);
+	strncpy(cap->driver, DRIVER_NAME, sizeof(cap->driver) - 1);
 	strlcpy(cap->bus_info, vdev->name, sizeof(cap->bus_info));
 	cap->version = TIMBLOGIW_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
-- 
cgit v1.2.3


From 07e80305babb27a332ce0f04a3c38ce495cbe711 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 20 Dec 2010 14:39:25 -0300
Subject: [media] v4l: mem2mem_testdev: remove BKL usage

Remove usage of BKL by usign per-device mutex.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mem2mem_testdev.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 3b19f5b25a72..c179041d91f8 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -524,7 +524,6 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 {
 	struct m2mtest_q_data *q_data;
 	struct videobuf_queue *vq;
-	int ret = 0;
 
 	vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
 	if (!vq)
@@ -534,12 +533,9 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 	if (!q_data)
 		return -EINVAL;
 
-	mutex_lock(&vq->vb_lock);
-
 	if (videobuf_queue_is_busy(vq)) {
 		v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__);
-		ret = -EBUSY;
-		goto out;
+		return -EBUSY;
 	}
 
 	q_data->fmt		= find_format(f);
@@ -553,9 +549,7 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 		"Setting format for type %d, wxh: %dx%d, fmt: %d\n",
 		f->type, q_data->width, q_data->height, q_data->fmt->fourcc);
 
-out:
-	mutex_unlock(&vq->vb_lock);
-	return ret;
+	return 0;
 }
 
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
@@ -845,10 +839,12 @@ static void queue_init(void *priv, struct videobuf_queue *vq,
 		       enum v4l2_buf_type type)
 {
 	struct m2mtest_ctx *ctx = priv;
+	struct m2mtest_dev *dev = ctx->dev;
 
-	videobuf_queue_vmalloc_init(vq, &m2mtest_qops, ctx->dev->v4l2_dev.dev,
-				    &ctx->dev->irqlock, type, V4L2_FIELD_NONE,
-				    sizeof(struct m2mtest_buffer), priv, NULL);
+	videobuf_queue_vmalloc_init(vq, &m2mtest_qops, dev->v4l2_dev.dev,
+				    &dev->irqlock, type, V4L2_FIELD_NONE,
+				    sizeof(struct m2mtest_buffer), priv,
+				    &dev->dev_mutex);
 }
 
 
@@ -920,7 +916,7 @@ static const struct v4l2_file_operations m2mtest_fops = {
 	.open		= m2mtest_open,
 	.release	= m2mtest_release,
 	.poll		= m2mtest_poll,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.mmap		= m2mtest_mmap,
 };
 
@@ -965,6 +961,7 @@ static int m2mtest_probe(struct platform_device *pdev)
 	}
 
 	*vfd = m2mtest_videodev;
+	vfd->lock = &dev->dev_mutex;
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
 	if (ret) {
-- 
cgit v1.2.3


From a19a5cd7b328ae457f79092e711d4bd888e1ca50 Mon Sep 17 00:00:00 2001
From: Pete Eberlein <pete@sensoray.com>
Date: Mon, 20 Dec 2010 19:18:59 -0300
Subject: [media] s2255drv: remove BKL

Remove BKL ioctl and use unlocked_ioctl with core-assisted locking instead.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s2255drv.c | 31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index a845753665c1..cf03372d1d17 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -268,7 +268,7 @@ struct s2255_dev {
 	struct v4l2_device 	v4l2_dev;
 	atomic_t                num_channels;
 	int			frames;
-	struct mutex		lock;
+	struct mutex		lock;	/* channels[].vdev.lock */
 	struct mutex		open_lock;
 	struct usb_device	*udev;
 	struct usb_interface	*interface;
@@ -780,20 +780,14 @@ static struct videobuf_queue_ops s2255_video_qops = {
 
 static int res_get(struct s2255_fh *fh)
 {
-	struct s2255_dev *dev = fh->dev;
-	/* is it free? */
 	struct s2255_channel *channel = fh->channel;
-	mutex_lock(&dev->lock);
-	if (channel->resources) {
-		/* no, someone else uses it */
-		mutex_unlock(&dev->lock);
-		return 0;
-	}
+	/* is it free? */
+	if (channel->resources)
+		return 0; /* no, someone else uses it */
 	/* it's free, grab it */
 	channel->resources = 1;
 	fh->resources = 1;
 	dprintk(1, "s2255: res: get\n");
-	mutex_unlock(&dev->lock);
 	return 1;
 }
 
@@ -811,11 +805,8 @@ static int res_check(struct s2255_fh *fh)
 static void res_free(struct s2255_fh *fh)
 {
 	struct s2255_channel *channel = fh->channel;
-	struct s2255_dev *dev = fh->dev;
-	mutex_lock(&dev->lock);
 	channel->resources = 0;
 	fh->resources = 0;
-	mutex_unlock(&dev->lock);
 	dprintk(1, "res: put\n");
 }
 
@@ -1218,7 +1209,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	__le32 *buffer;
 	unsigned long chn_rev;
 	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
-	mutex_lock(&dev->lock);
 	chn_rev = G_chnmap[channel->idx];
 	dprintk(3, "%s channel: %d\n", __func__, channel->idx);
 	/* if JPEG, set the quality */
@@ -1235,7 +1225,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
-		mutex_unlock(&dev->lock);
 		return -ENOMEM;
 	}
 	/* set the mode */
@@ -1260,7 +1249,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	}
 	/* clear the restart flag */
 	channel->mode.restart = 0;
-	mutex_unlock(&dev->lock);
 	dprintk(1, "%s chn %d, result: %d\n", __func__, channel->idx, res);
 	return res;
 }
@@ -1271,13 +1259,11 @@ static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus)
 	__le32 *buffer;
 	u32 chn_rev;
 	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
-	mutex_lock(&dev->lock);
 	chn_rev = G_chnmap[channel->idx];
 	dprintk(4, "%s chan %d\n", __func__, channel->idx);
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
-		mutex_unlock(&dev->lock);
 		return -ENOMEM;
 	}
 	/* form the get vid status command */
@@ -1297,7 +1283,6 @@ static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus)
 	}
 	*pstatus = channel->vidstatus;
 	dprintk(4, "%s, vid status %d\n", __func__, *pstatus);
-	mutex_unlock(&dev->lock);
 	return res;
 }
 
@@ -1816,7 +1801,8 @@ static int s2255_open(struct file *file)
 				    NULL, &dev->slock,
 				    fh->type,
 				    V4L2_FIELD_INTERLACED,
-				    sizeof(struct s2255_buffer), fh, NULL);
+				    sizeof(struct s2255_buffer),
+				    fh, vdev->lock);
 	return 0;
 }
 
@@ -1899,7 +1885,7 @@ static const struct v4l2_file_operations s2255_fops_v4l = {
 	.open = s2255_open,
 	.release = s2255_release,
 	.poll = s2255_poll,
-	.ioctl = video_ioctl2,	/* V4L2 ioctl handler */
+	.unlocked_ioctl = video_ioctl2,	/* V4L2 ioctl handler */
 	.mmap = s2255_mmap_v4l,
 };
 
@@ -1969,6 +1955,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 		channel->vidq.dev = dev;
 		/* register 4 video devices */
 		channel->vdev = template;
+		channel->vdev.lock = &dev->lock;
 		channel->vdev.v4l2_dev = &dev->v4l2_dev;
 		video_set_drvdata(&channel->vdev, channel);
 		if (video_nr == -1)
@@ -2675,7 +2662,9 @@ static void s2255_disconnect(struct usb_interface *interface)
 	struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface));
 	int i;
 	int channels = atomic_read(&dev->num_channels);
+	mutex_lock(&dev->lock);
 	v4l2_device_disconnect(&dev->v4l2_dev);
+	mutex_unlock(&dev->lock);
 	/*see comments in the uvc_driver.c usb disconnect function */
 	atomic_inc(&dev->num_channels);
 	/* unregister each video device. */
-- 
cgit v1.2.3


From 634b4770539de63581ccdb554426547ced6ded01 Mon Sep 17 00:00:00 2001
From: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Date: Fri, 24 Dec 2010 17:06:04 -0300
Subject: [media] gspca - sq905c: Adds the Lego Bionicle
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds the Vendor:Product number of the Lego Bionicle camera to
the existing gspca/sq905c.c and also a line for the camera in gspca.txt.
The camera works "out of the box" with these small changes. So this is
just in time for Christmas. Think of the children.

Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sq905c.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index c2e88b5303cb..8ba199543856 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -301,6 +301,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x2770, 0x905c)},
 	{USB_DEVICE(0x2770, 0x9050)},
+	{USB_DEVICE(0x2770, 0x9051)},
 	{USB_DEVICE(0x2770, 0x9052)},
 	{USB_DEVICE(0x2770, 0x913d)},
 	{}
-- 
cgit v1.2.3


From 3ebd17946448df50b9082412d09955c87a112721 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:07:57 -0300
Subject: [media] gspca - sq930x: Don't register a webcam when there are USB
 errors
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sq930x.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 3e4b0b94c700..74628eda7d96 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -687,10 +687,12 @@ static void cmos_probe(struct gspca_dev *gspca_dev)
 		if (gspca_dev->usb_buf[0] != 0)
 			break;
 	}
-	if (i >= ARRAY_SIZE(probe_order))
+	if (i >= ARRAY_SIZE(probe_order)) {
 		err("Unknown sensor");
-	else
-		sd->sensor = probe_order[i];
+		gspca_dev->usb_err = -EINVAL;
+		return;
+	}
+	sd->sensor = probe_order[i];
 }
 
 static void mt9v111_init(struct gspca_dev *gspca_dev)
@@ -867,6 +869,9 @@ static int sd_init(struct gspca_dev *gspca_dev)
  */
 
 	reg_r(gspca_dev, SQ930_CTRL_GET_DEV_INFO, 8);
+	if (gspca_dev->usb_err < 0)
+		return gspca_dev->usb_err;
+
 /* it returns:
  * 03 00 12 93 0b f6 c9 00	live! ultra
  * 03 00 07 93 0b f6 ca 00	live! ultra for notebook
@@ -905,10 +910,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		else
 			cmos_probe(gspca_dev);
 	}
-
-	PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
-
-	global_init(sd, 1);
+	if (gspca_dev->usb_err >= 0) {
+		PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
+		global_init(sd, 1);
+	}
 	return gspca_dev->usb_err;
 }
 
-- 
cgit v1.2.3


From efd3769269f2ef9a0ad452ea8298b3edcb2f5a62 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:11:54 -0300
Subject: [media] gspca - sq930x: Some detected sensors are not handled yet
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

These are OmniVision's OV7660 and OV9630.
Don't register the webcam when they are found.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sq930x.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 74628eda7d96..b1d771bc3f2c 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -693,6 +693,13 @@ static void cmos_probe(struct gspca_dev *gspca_dev)
 		return;
 	}
 	sd->sensor = probe_order[i];
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV9630:
+		err("Sensor %s not yet treated", sensor_tb[sd->sensor].name);
+		gspca_dev->usb_err = -EINVAL;
+		break;
+	}
 }
 
 static void mt9v111_init(struct gspca_dev *gspca_dev)
-- 
cgit v1.2.3


From f2c5d92ecd4c69a4f86e76d19cb7663f2ebf4781 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:19:59 -0300
Subject: [media] gspca - sq930x: Fix a bad comment
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sq930x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index b1d771bc3f2c..a4a98811b9e3 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -912,7 +912,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	if (sd->sensor == SENSOR_MI0360) {
 
 		/* no sensor probe for icam tracer */
-		if (gspca_dev->usb_buf[5] == 0xf6)	/* if CMOS */
+		if (gspca_dev->usb_buf[5] == 0xf6)	/* if ccd */
 			sd->sensor = SENSOR_ICX098BQ;
 		else
 			cmos_probe(gspca_dev);
-- 
cgit v1.2.3


From 76ebc16b87592350e4ea70681855171adf73f055 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:22:21 -0300
Subject: [media] gspca - main: Check the isoc packet status before its length
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When an error is set for an isochronous packet, the length of the packet
may be null. In this case, the error was not detected and the image
was not discarded as it should be.

Reported-by: Franck Bourdonnec <fbourdonnec@chez.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 5a2274b2b0e8..03381c68b986 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -320,12 +320,6 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	for (i = 0; i < urb->number_of_packets; i++) {
 
 		/* check the packet status and length */
-		len = urb->iso_frame_desc[i].actual_length;
-		if (len == 0) {
-			if (gspca_dev->empty_packet == 0)
-				gspca_dev->empty_packet = 1;
-			continue;
-		}
 		st = urb->iso_frame_desc[i].status;
 		if (st) {
 			err("ISOC data error: [%d] len=%d, status=%d",
@@ -333,6 +327,12 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 			gspca_dev->last_packet_type = DISCARD_PACKET;
 			continue;
 		}
+		len = urb->iso_frame_desc[i].actual_length;
+		if (len == 0) {
+			if (gspca_dev->empty_packet == 0)
+				gspca_dev->empty_packet = 1;
+			continue;
+		}
 
 		/* let the packet be analyzed by the subdriver */
 		PDEBUG(D_PACK, "packet [%d] o:%d l:%d",
-- 
cgit v1.2.3


From 668f44a603dd4b3468cecd7d8d6dc525207db94e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:46:14 -0300
Subject: [media] gspca: Use the global error status for get/set streamparm
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Also, in ov534, don't check the parm type.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 22 ++++++++++++----------
 drivers/media/video/gspca/gspca.h |  2 +-
 drivers/media/video/gspca/ov534.c | 14 ++------------
 3 files changed, 15 insertions(+), 23 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 03381c68b986..92b5dfb12ed1 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1708,12 +1708,13 @@ static int vidioc_g_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		gspca_dev->usb_err = 0;
-		if (gspca_dev->present)
-			ret = gspca_dev->sd_desc->get_streamparm(gspca_dev,
-								 parm);
-		else
+		if (gspca_dev->present) {
+			gspca_dev->usb_err = 0;
+			gspca_dev->sd_desc->get_streamparm(gspca_dev, parm);
+			ret = gspca_dev->usb_err;
+		} else {
 			ret = -ENODEV;
+		}
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1738,12 +1739,13 @@ static int vidioc_s_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		gspca_dev->usb_err = 0;
-		if (gspca_dev->present)
-			ret = gspca_dev->sd_desc->set_streamparm(gspca_dev,
-								 parm);
-		else
+		if (gspca_dev->present) {
+			gspca_dev->usb_err = 0;
+			gspca_dev->sd_desc->set_streamparm(gspca_dev, parm);
+			ret = gspca_dev->usb_err;
+		} else {
 			ret = -ENODEV;
+		}
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index d4d210b56b49..3c8a63bbc172 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -93,7 +93,7 @@ typedef int (*cam_reg_op) (struct gspca_dev *,
 				struct v4l2_dbg_register *);
 typedef int (*cam_ident_op) (struct gspca_dev *,
 				struct v4l2_dbg_chip_ident *);
-typedef int (*cam_streamparm_op) (struct gspca_dev *,
+typedef void (*cam_streamparm_op) (struct gspca_dev *,
 				  struct v4l2_streamparm *);
 typedef int (*cam_qmnu_op) (struct gspca_dev *,
 			struct v4l2_querymenu *);
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 88ef03f6235b..0edf93973b1c 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1243,34 +1243,26 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 }
 
 /* get stream parameters (framerate) */
-static int sd_get_streamparm(struct gspca_dev *gspca_dev,
+static void sd_get_streamparm(struct gspca_dev *gspca_dev,
 			     struct v4l2_streamparm *parm)
 {
 	struct v4l2_captureparm *cp = &parm->parm.capture;
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
 	cp->capability |= V4L2_CAP_TIMEPERFRAME;
 	tpf->numerator = 1;
 	tpf->denominator = sd->frame_rate;
-
-	return 0;
 }
 
 /* set stream parameters (framerate) */
-static int sd_set_streamparm(struct gspca_dev *gspca_dev,
+static void sd_set_streamparm(struct gspca_dev *gspca_dev,
 			     struct v4l2_streamparm *parm)
 {
 	struct v4l2_captureparm *cp = &parm->parm.capture;
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
 	/* Set requested framerate */
 	sd->frame_rate = tpf->denominator / tpf->numerator;
 	if (gspca_dev->streaming)
@@ -1279,8 +1271,6 @@ static int sd_set_streamparm(struct gspca_dev *gspca_dev,
 	/* Return the actual framerate */
 	tpf->numerator = 1;
 	tpf->denominator = sd->frame_rate;
-
-	return 0;
 }
 
 /* sub-driver description */
-- 
cgit v1.2.3


From 7a5a414ccb5bfc0fe277ef1a0e9d1e492a6f083c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 13:58:45 -0300
Subject: [media] gspca - ov519: Bad detection of some ov7670 sensors
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Tested-by: jim smyth <jsmyth1969@gmail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 0ed21dbb46cd..e1c3b9328ace 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2676,8 +2676,8 @@ static void ov7xx0_configure(struct sd *sd)
 		high = i2c_r(sd, 0x0a);
 		low = i2c_r(sd, 0x0b);
 		/* info("%x, %x", high, low); */
-		if (high == 0x76 && low == 0x73) {
-			PDEBUG(D_PROBE, "Sensor is an OV7670");
+		if (high == 0x76 && (low & 0xf0) == 0x70) {
+			PDEBUG(D_PROBE, "Sensor is an OV76%02x", low);
 			sd->sensor = SEN_OV7670;
 		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV7610");
-- 
cgit v1.2.3


From b69a219e0e97441dbeb0262cf85468b61a161399 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Sat, 25 Dec 2010 14:01:42 -0300
Subject: [media] gspca - ov534_9: Remove an useless instruction
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov534_9.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index e831f0d280ea..c5244b4b4777 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -945,7 +945,6 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	u8 val;
 
 /*fixme: should adjust agc/awb/aec by different controls */
-	val = sd->autogain;
 	val = sccb_read(gspca_dev, 0x13);		/* com8 */
 	sccb_write(gspca_dev, 0xff, 0x00);
 	if (sd->autogain)
-- 
cgit v1.2.3


From 08af245de0cf6ab5f4ed008ee2bb99273774fce0 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 24 Dec 2010 10:33:19 -0300
Subject: [media] V4L: remove V4L1 compatibility mode

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/Kconfig                           |   15 -
 drivers/media/common/saa7146_video.c            |   32 -
 drivers/media/video/Makefile                    |    4 -
 drivers/media/video/au0828/au0828-video.c       |   12 -
 drivers/media/video/bt8xx/bttv-driver.c         |   28 -
 drivers/media/video/cpia2/cpia2_v4l.c           |   38 -
 drivers/media/video/cx231xx/cx231xx-video.c     |   12 -
 drivers/media/video/cx23885/cx23885-video.c     |   32 -
 drivers/media/video/cx88/cx88-video.c           |   12 -
 drivers/media/video/em28xx/em28xx-video.c       |   16 -
 drivers/media/video/pvrusb2/pvrusb2-v4l2.c      |    4 +-
 drivers/media/video/pwc/pwc-v4l.c               |   17 -
 drivers/media/video/s2255drv.c                  |   12 -
 drivers/media/video/saa7134/saa7134-video.c     |   11 -
 drivers/media/video/usbvision/usbvision-video.c |    3 -
 drivers/media/video/uvc/uvc_v4l2.c              |    7 +-
 drivers/media/video/v4l1-compat.c               | 1277 -----------------------
 drivers/media/video/v4l2-compat-ioctl32.c       |  325 ------
 drivers/media/video/v4l2-ioctl.c                |   86 --
 drivers/media/video/via-camera.c                |   13 -
 drivers/media/video/videobuf-core.c             |   30 -
 drivers/media/video/videobuf-dma-sg.c           |   23 -
 drivers/media/video/vivi.c                      |   12 -
 23 files changed, 4 insertions(+), 2017 deletions(-)
 delete mode 100644 drivers/media/video/v4l1-compat.c

(limited to 'drivers/media')

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index c21dfc28482e..9ea1a6d70f0a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -53,21 +53,6 @@ config VIDEO_ALLOW_V4L1
 
 	  If you are unsure as to whether this is required, answer Y.
 
-config VIDEO_V4L1_COMPAT
-	bool "Enable Video For Linux API 1 compatible Layer" if !VIDEO_ALLOW_V4L1
-	depends on VIDEO_DEV
-	default y
-	---help---
-	  Enables a compatibility API used by most V4L2 devices to allow
-	  its usage with legacy applications that supports only V4L1 api.
-
-	  Documentation for the original API is included in the file
-	  <Documentation/video4linux/API.html>.
-
-	  User tools for this are available from
-	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
-
-	  If you are unsure as to whether this is required, answer Y.
 
 #
 # DVB Core
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index d246910129e8..0ac5c619aecf 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1129,35 +1129,6 @@ static int vidioc_g_chip_ident(struct file *file, void *__fh,
 			core, g_chip_ident, chip);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *__fh, struct video_mbuf *mbuf)
-{
-	struct saa7146_fh *fh = __fh;
-	struct videobuf_queue *q = &fh->video_q;
-	int err, i;
-
-	/* fixme: number of capture buffers and sizes for v4l apps */
-	int gbuffers = 2;
-	int gbufsize = 768 * 576 * 4;
-
-	DEB_D(("VIDIOCGMBUF \n"));
-
-	q = &fh->video_q;
-	err = videobuf_mmap_setup(q, gbuffers, gbufsize,
-			V4L2_MEMORY_MMAP);
-	if (err < 0)
-		return err;
-
-	gbuffers = err;
-	memset(mbuf, 0, sizeof(*mbuf));
-	mbuf->frames = gbuffers;
-	mbuf->size   = gbuffers * gbufsize;
-	for (i = 0; i < gbuffers; i++)
-		mbuf->offsets[i] = i * gbufsize;
-	return 0;
-}
-#endif
-
 const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_querycap             = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
@@ -1186,9 +1157,6 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_streamon             = vidioc_streamon,
 	.vidioc_streamoff            = vidioc_streamoff,
 	.vidioc_g_parm 		     = vidioc_g_parm,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                 = vidiocgmbuf,
-#endif
 };
 
 /*********************************************************************************/
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 482f14b3ff84..ace7b6eaf5b8 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -22,10 +22,6 @@ endif
 
 obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
 
-ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
-  obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
-endif
-
 # All i2c modules must come first:
 
 obj-$(CONFIG_VIDEO_TUNER) += tuner.o
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 48682af911fa..e41e4ad5cc40 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -1809,15 +1809,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct au0828_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 static struct v4l2_file_operations au0828_v4l_fops = {
 	.owner      = THIS_MODULE,
 	.open       = au0828_v4l2_open,
@@ -1861,9 +1852,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_register          = vidioc_s_register,
 #endif
 	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                = vidiocgmbuf,
-#endif
 };
 
 static const struct video_device au0828_video_template = {
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 54fbab95b88c..961d0805d877 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -2597,31 +2597,6 @@ static int bttv_s_fmt_vid_overlay(struct file *file, void *priv,
 	return setup_window_lock(fh, btv, &f->fmt.win, 1);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	int retval;
-	unsigned int i;
-	struct bttv_fh *fh = priv;
-
-	retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
-				     V4L2_MEMORY_MMAP);
-	if (retval < 0) {
-		return retval;
-	}
-
-	gbuffers = retval;
-	memset(mbuf, 0, sizeof(*mbuf));
-	mbuf->frames = gbuffers;
-	mbuf->size   = gbuffers * gbufsize;
-
-	for (i = 0; i < gbuffers; i++)
-		mbuf->offsets[i] = i * gbufsize;
-
-	return 0;
-}
-#endif
-
 static int bttv_querycap(struct file *file, void  *priv,
 				struct v4l2_capability *cap)
 {
@@ -3354,9 +3329,6 @@ static const struct v4l2_ioctl_ops bttv_ioctl_ops = {
 	.vidioc_streamoff               = bttv_streamoff,
 	.vidioc_g_tuner                 = bttv_g_tuner,
 	.vidioc_s_tuner                 = bttv_s_tuner,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                    = vidiocgmbuf,
-#endif
 	.vidioc_g_crop                  = bttv_g_crop,
 	.vidioc_s_crop                  = bttv_s_crop,
 	.vidioc_g_fbuf                  = bttv_g_fbuf,
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 46b433bbf2c1..7edf80b0d01a 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -417,28 +417,6 @@ static int sync(struct camera_data *cam, int frame_nr)
 	}
 }
 
-/******************************************************************************
- *
- *  ioctl_get_mbuf
- *
- *****************************************************************************/
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int ioctl_get_mbuf(void *arg, struct camera_data *cam)
-{
-	struct video_mbuf *vm;
-	int i;
-	vm = arg;
-
-	memset(vm, 0, sizeof(*vm));
-	vm->size = cam->frame_size*cam->num_frames;
-	vm->frames = cam->num_frames;
-	for (i = 0; i < cam->num_frames; i++)
-		vm->offsets[i] = cam->frame_size * i;
-
-	return 0;
-}
-#endif
-
 /******************************************************************************
  *
  *  ioctl_set_gpio
@@ -1380,17 +1358,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		}
 		break;
 	}
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGMBUF:
-	{
-		struct cpia2_fh *fh = file->private_data;
-		if(fh->prio != V4L2_PRIORITY_RECORD) {
-			mutex_unlock(&cam->busy_lock);
-			return -EBUSY;
-		}
-		break;
-	}
-#endif
 	default:
 		break;
 	}
@@ -1400,11 +1367,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case CPIA2_IOC_SET_GPIO:
 		retval = ioctl_set_gpio(arg, cam);
 		break;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGMBUF:	/* mmap interface */
-		retval = ioctl_get_mbuf(arg, cam);
-		break;
-#endif
 	case VIDIOC_QUERYCAP:
 		retval = ioctl_querycap(arg,cam);
 		break;
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index b13b69fb2af6..7e3e8c4f19b7 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -2044,15 +2044,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct cx231xx_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 /* ----------------------------------------------------------- */
 /* RADIO ESPECIFIC IOCTLS                                      */
 /* ----------------------------------------------------------- */
@@ -2507,9 +2498,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_g_register             = vidioc_g_register,
 	.vidioc_s_register             = vidioc_s_register,
 #endif
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                   = vidiocgmbuf,
-#endif
 };
 
 static struct video_device cx231xx_vbi_template;
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 8b2fb8a4375c..796a797b5205 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1024,35 +1024,6 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv,
-	struct video_mbuf *mbuf)
-{
-	struct cx23885_fh *fh = priv;
-	struct videobuf_queue *q;
-	struct v4l2_requestbuffers req;
-	unsigned int i;
-	int err;
-
-	q = get_queue(fh);
-	memset(&req, 0, sizeof(req));
-	req.type   = q->type;
-	req.count  = 8;
-	req.memory = V4L2_MEMORY_MMAP;
-	err = videobuf_reqbufs(q, &req);
-	if (err < 0)
-		return err;
-
-	mbuf->frames = req.count;
-	mbuf->size   = 0;
-	for (i = 0; i < mbuf->frames; i++) {
-		mbuf->offsets[i]  = q->bufs[i]->boff;
-		mbuf->size       += q->bufs[i]->bsize;
-	}
-	return 0;
-}
-#endif
-
 static int vidioc_reqbufs(struct file *file, void *priv,
 	struct v4l2_requestbuffers *p)
 {
@@ -1427,9 +1398,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 62cea9549404..9a37b839c67c 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1179,15 +1179,6 @@ static int vidioc_enum_fmt_vid_cap (struct file *file, void  *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct cx8800_fh           *fh  = priv;
-
-	return videobuf_cgmbuf (get_queue(fh), mbuf, 8);
-}
-#endif
-
 static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p)
 {
 	struct cx8800_fh  *fh   = priv;
@@ -1731,9 +1722,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 908e3bc88303..7be9bbad79ba 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1934,19 +1934,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 				      O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct em28xx_fh  *fh = priv;
-
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-	else
-		return videobuf_cgmbuf(&fh->vb_vbiq, mbuf, 8);
-}
-#endif
-
-
 /* ----------------------------------------------------------- */
 /* RADIO ESPECIFIC IOCTLS                                      */
 /* ----------------------------------------------------------- */
@@ -2359,9 +2346,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_register          = vidioc_s_register,
 	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
 #endif
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                = vidiocgmbuf,
-#endif
 };
 
 static const struct video_device em28xx_video_template = {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index aaafa0398fd5..58617fc656c2 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -852,8 +852,8 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 #endif
 
 	default :
-		ret = v4l_compat_translate_ioctl(file, cmd,
-						 arg, pvr2_v4l2_do_ioctl);
+		ret = -EINVAL;
+		break;
 	}
 
 	pvr2_hdw_commit_ctl(hdw);
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index 2ef1668638f9..8ca4d22b4384 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -362,23 +362,6 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-		/* mmap() functions */
-		case VIDIOCGMBUF:
-		{
-			/* Tell the user program how much memory is needed for a mmap() */
-			struct video_mbuf *vm = arg;
-			int i;
-
-			memset(vm, 0, sizeof(*vm));
-			vm->size = pwc_mbufs * pdev->len_per_image;
-			vm->frames = pwc_mbufs; /* double buffering should be enough for most applications */
-			for (i = 0; i < pwc_mbufs; i++)
-				vm->offsets[i] = i * pdev->len_per_image;
-			break;
-		}
-#endif
-
 		/* V4L2 Layer */
 		case VIDIOC_QUERYCAP:
 		{
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index cf03372d1d17..b63f8cafa671 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -1097,15 +1097,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 	return rc;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidioc_cgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct s2255_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 /* write to the configuration pipe, synchronously */
 static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf,
 			      int size)
@@ -1909,9 +1900,6 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 	.vidioc_s_ctrl = vidioc_s_ctrl,
 	.vidioc_streamon = vidioc_streamon,
 	.vidioc_streamoff = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = vidioc_cgmbuf,
-#endif
 	.vidioc_s_jpegcomp = vidioc_s_jpegcomp,
 	.vidioc_g_jpegcomp = vidioc_g_jpegcomp,
 	.vidioc_s_parm = vidioc_s_parm,
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index f0b1573137f4..ad22be27bd38 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -2211,14 +2211,6 @@ static int saa7134_overlay(struct file *file, void *f, unsigned int on)
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct saa7134_fh *fh = file->private_data;
-	return videobuf_cgmbuf(saa7134_queue(fh), mbuf, 8);
-}
-#endif
-
 static int saa7134_reqbufs(struct file *file, void *priv,
 					struct v4l2_requestbuffers *p)
 {
@@ -2456,9 +2448,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_streamoff		= saa7134_streamoff,
 	.vidioc_g_tuner			= saa7134_g_tuner,
 	.vidioc_s_tuner			= saa7134_s_tuner,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf			= vidiocgmbuf,
-#endif
 	.vidioc_g_crop			= saa7134_g_crop,
 	.vidioc_s_crop			= saa7134_s_crop,
 	.vidioc_g_fbuf			= saa7134_g_fbuf,
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 011c0c386995..20da6ea2cdf0 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1273,9 +1273,6 @@ static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-/*  	.vidiocgmbuf          = vidiocgmbuf, */
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 8cf61e8a634f..9005a8d9d5f8 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -1035,11 +1035,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		return uvc_xu_ctrl_query(chain, arg, 1);
 
 	default:
-		if ((ret = v4l_compat_translate_ioctl(file, cmd, arg,
-			uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
-			uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n",
-				  cmd);
-		return ret;
+		uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd);
+		return -EINVAL;
 	}
 
 	return ret;
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
deleted file mode 100644
index d4ac751036a2..000000000000
--- a/drivers/media/video/v4l1-compat.c
+++ /dev/null
@@ -1,1277 +0,0 @@
-/*
- *
- *	Video for Linux Two
- *	Backward Compatibility Layer
- *
- *	Support subroutines for providing V4L2 drivers with backward
- *	compatibility with applications using the old API.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * Author:	Bill Dirks <bill@thedirks.org>
- *		et al.
- *
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-MODULE_AUTHOR("Bill Dirks");
-MODULE_DESCRIPTION("v4l(1) compatibility layer for v4l2 drivers.");
-MODULE_LICENSE("GPL");
-
-#define dprintk(fmt, arg...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "v4l1-compat: " fmt , ## arg);\
-	} while (0)
-
-/*
- *	I O C T L   T R A N S L A T I O N
- *
- *	From here on down is the code for translating the numerous
- *	ioctl commands from the old API to the new API.
- */
-
-static int
-get_v4l_control(struct file             *file,
-		int			cid,
-		v4l2_kioctl             drv)
-{
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_control	ctrl2;
-	int			err;
-
-	qctrl2.id = cid;
-	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
-	if (err < 0)
-		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
-	if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) {
-		ctrl2.id = qctrl2.id;
-		err = drv(file, VIDIOC_G_CTRL, &ctrl2);
-		if (err < 0) {
-			dprintk("VIDIOC_G_CTRL: %d\n", err);
-			return 0;
-		}
-		return DIV_ROUND_CLOSEST((ctrl2.value-qctrl2.minimum) * 65535,
-					 qctrl2.maximum - qctrl2.minimum);
-	}
-	return 0;
-}
-
-static int
-set_v4l_control(struct file             *file,
-		int			cid,
-		int			value,
-		v4l2_kioctl             drv)
-{
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_control	ctrl2;
-	int			err;
-
-	qctrl2.id = cid;
-	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
-	if (err < 0)
-		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
-	if (err == 0 &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED) &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_GRABBED)) {
-		if (value < 0)
-			value = 0;
-		if (value > 65535)
-			value = 65535;
-		if (value && qctrl2.type == V4L2_CTRL_TYPE_BOOLEAN)
-			value = 65535;
-		ctrl2.id = qctrl2.id;
-		ctrl2.value =
-			(value * (qctrl2.maximum - qctrl2.minimum)
-			 + 32767)
-			/ 65535;
-		ctrl2.value += qctrl2.minimum;
-		err = drv(file, VIDIOC_S_CTRL, &ctrl2);
-		if (err < 0)
-			dprintk("VIDIOC_S_CTRL: %d\n", err);
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------- */
-
-static const unsigned int palette2pixelformat[] = {
-	[VIDEO_PALETTE_GREY]    = V4L2_PIX_FMT_GREY,
-	[VIDEO_PALETTE_RGB555]  = V4L2_PIX_FMT_RGB555,
-	[VIDEO_PALETTE_RGB565]  = V4L2_PIX_FMT_RGB565,
-	[VIDEO_PALETTE_RGB24]   = V4L2_PIX_FMT_BGR24,
-	[VIDEO_PALETTE_RGB32]   = V4L2_PIX_FMT_BGR32,
-	/* yuv packed pixel */
-	[VIDEO_PALETTE_YUYV]    = V4L2_PIX_FMT_YUYV,
-	[VIDEO_PALETTE_YUV422]  = V4L2_PIX_FMT_YUYV,
-	[VIDEO_PALETTE_UYVY]    = V4L2_PIX_FMT_UYVY,
-	/* yuv planar */
-	[VIDEO_PALETTE_YUV410P] = V4L2_PIX_FMT_YUV410,
-	[VIDEO_PALETTE_YUV420]  = V4L2_PIX_FMT_YUV420,
-	[VIDEO_PALETTE_YUV420P] = V4L2_PIX_FMT_YUV420,
-	[VIDEO_PALETTE_YUV411P] = V4L2_PIX_FMT_YUV411P,
-	[VIDEO_PALETTE_YUV422P] = V4L2_PIX_FMT_YUV422P,
-};
-
-static unsigned int __pure
-palette_to_pixelformat(unsigned int palette)
-{
-	if (palette < ARRAY_SIZE(palette2pixelformat))
-		return palette2pixelformat[palette];
-	else
-		return 0;
-}
-
-static unsigned int __attribute_const__
-pixelformat_to_palette(unsigned int pixelformat)
-{
-	int	palette = 0;
-	switch (pixelformat) {
-	case V4L2_PIX_FMT_GREY:
-		palette = VIDEO_PALETTE_GREY;
-		break;
-	case V4L2_PIX_FMT_RGB555:
-		palette = VIDEO_PALETTE_RGB555;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		palette = VIDEO_PALETTE_RGB565;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		palette = VIDEO_PALETTE_RGB24;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-		palette = VIDEO_PALETTE_RGB32;
-		break;
-	/* yuv packed pixel */
-	case V4L2_PIX_FMT_YUYV:
-		palette = VIDEO_PALETTE_YUYV;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		palette = VIDEO_PALETTE_UYVY;
-		break;
-	/* yuv planar */
-	case V4L2_PIX_FMT_YUV410:
-		palette = VIDEO_PALETTE_YUV420;
-		break;
-	case V4L2_PIX_FMT_YUV420:
-		palette = VIDEO_PALETTE_YUV420;
-		break;
-	case V4L2_PIX_FMT_YUV411P:
-		palette = VIDEO_PALETTE_YUV411P;
-		break;
-	case V4L2_PIX_FMT_YUV422P:
-		palette = VIDEO_PALETTE_YUV422P;
-		break;
-	}
-	return palette;
-}
-
-/* ----------------------------------------------------------------- */
-
-static int poll_one(struct file *file, struct poll_wqueues *pwq)
-{
-	int retval = 1;
-	poll_table *table;
-
-	poll_initwait(pwq);
-	table = &pwq->pt;
-	for (;;) {
-		int mask;
-		mask = file->f_op->poll(file, table);
-		if (mask & POLLIN)
-			break;
-		table = NULL;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		poll_schedule(pwq, TASK_INTERRUPTIBLE);
-	}
-	poll_freewait(pwq);
-	return retval;
-}
-
-static int count_inputs(
-			struct file *file,
-			v4l2_kioctl drv)
-{
-	struct v4l2_input input2;
-	int i;
-
-	for (i = 0;; i++) {
-		memset(&input2, 0, sizeof(input2));
-		input2.index = i;
-		if (0 != drv(file, VIDIOC_ENUMINPUT, &input2))
-			break;
-	}
-	return i;
-}
-
-static int check_size(
-		struct file *file,
-		v4l2_kioctl drv,
-		int *maxw,
-		int *maxh)
-{
-	struct v4l2_fmtdesc desc2;
-	struct v4l2_format  fmt2;
-
-	memset(&desc2, 0, sizeof(desc2));
-	memset(&fmt2, 0, sizeof(fmt2));
-
-	desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	if (0 != drv(file, VIDIOC_ENUM_FMT, &desc2))
-		goto done;
-
-	fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	fmt2.fmt.pix.width       = 10000;
-	fmt2.fmt.pix.height      = 10000;
-	fmt2.fmt.pix.pixelformat = desc2.pixelformat;
-	if (0 != drv(file, VIDIOC_TRY_FMT, &fmt2))
-		goto done;
-
-	*maxw = fmt2.fmt.pix.width;
-	*maxh = fmt2.fmt.pix.height;
-
-done:
-	return 0;
-}
-
-/* ----------------------------------------------------------------- */
-
-static noinline long v4l1_compat_get_capabilities(
-					struct video_capability *cap,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-	struct v4l2_capability *cap2;
-
-	cap2 = kzalloc(sizeof(*cap2), GFP_KERNEL);
-	if (!cap2) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(cap, 0, sizeof(*cap));
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	err = drv(file, VIDIOC_QUERYCAP, cap2);
-	if (err < 0) {
-		dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %ld\n", err);
-		goto done;
-	}
-	if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) {
-		err = drv(file, VIDIOC_G_FBUF, &fbuf);
-		if (err < 0) {
-			dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %ld\n", err);
-			memset(&fbuf, 0, sizeof(fbuf));
-		}
-		err = 0;
-	}
-
-	memcpy(cap->name, cap2->card,
-	       min(sizeof(cap->name), sizeof(cap2->card)));
-	cap->name[sizeof(cap->name) - 1] = 0;
-	if (cap2->capabilities & V4L2_CAP_VIDEO_CAPTURE)
-		cap->type |= VID_TYPE_CAPTURE;
-	if (cap2->capabilities & V4L2_CAP_TUNER)
-		cap->type |= VID_TYPE_TUNER;
-	if (cap2->capabilities & V4L2_CAP_VBI_CAPTURE)
-		cap->type |= VID_TYPE_TELETEXT;
-	if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY)
-		cap->type |= VID_TYPE_OVERLAY;
-	if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING)
-		cap->type |= VID_TYPE_CLIPPING;
-
-	cap->channels  = count_inputs(file, drv);
-	check_size(file, drv,
-		   &cap->maxwidth, &cap->maxheight);
-	cap->audios    =  0; /* FIXME */
-	cap->minwidth  = 48; /* FIXME */
-	cap->minheight = 32; /* FIXME */
-
-done:
-	kfree(cap2);
-	return err;
-}
-
-static noinline long v4l1_compat_get_frame_buffer(
-					struct video_buffer *buffer,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-
-	memset(buffer, 0, sizeof(*buffer));
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	err = drv(file, VIDIOC_G_FBUF, &fbuf);
-	if (err < 0) {
-		dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %ld\n", err);
-		goto done;
-	}
-	buffer->base   = fbuf.base;
-	buffer->height = fbuf.fmt.height;
-	buffer->width  = fbuf.fmt.width;
-
-	switch (fbuf.fmt.pixelformat) {
-	case V4L2_PIX_FMT_RGB332:
-		buffer->depth = 8;
-		break;
-	case V4L2_PIX_FMT_RGB555:
-		buffer->depth = 15;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		buffer->depth = 16;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		buffer->depth = 24;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-		buffer->depth = 32;
-		break;
-	default:
-		buffer->depth = 0;
-	}
-	if (fbuf.fmt.bytesperline) {
-		buffer->bytesperline = fbuf.fmt.bytesperline;
-		if (!buffer->depth && buffer->width)
-			buffer->depth   = ((fbuf.fmt.bytesperline<<3)
-					  + (buffer->width-1))
-					  / buffer->width;
-	} else {
-		buffer->bytesperline =
-			(buffer->width * buffer->depth + 7) & 7;
-		buffer->bytesperline >>= 3;
-	}
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_frame_buffer(
-					struct video_buffer *buffer,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-
-	memset(&fbuf, 0, sizeof(fbuf));
-	fbuf.base       = buffer->base;
-	fbuf.fmt.height = buffer->height;
-	fbuf.fmt.width  = buffer->width;
-	switch (buffer->depth) {
-	case 8:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB332;
-		break;
-	case 15:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB555;
-		break;
-	case 16:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
-		break;
-	case 24:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR24;
-		break;
-	case 32:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR32;
-		break;
-	}
-	fbuf.fmt.bytesperline = buffer->bytesperline;
-	err = drv(file, VIDIOC_S_FBUF, &fbuf);
-	if (err < 0)
-		dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_win_cap_dimensions(
-					struct video_window *win,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(win, 0, sizeof(*win));
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0)
-		dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %ld\n", err);
-	if (err == 0) {
-		win->x         = fmt->fmt.win.w.left;
-		win->y         = fmt->fmt.win.w.top;
-		win->width     = fmt->fmt.win.w.width;
-		win->height    = fmt->fmt.win.w.height;
-		win->chromakey = fmt->fmt.win.chromakey;
-		win->clips     = NULL;
-		win->clipcount = 0;
-		goto done;
-	}
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	win->x         = 0;
-	win->y         = 0;
-	win->width     = fmt->fmt.pix.width;
-	win->height    = fmt->fmt.pix.height;
-	win->chromakey = 0;
-	win->clips     = NULL;
-	win->clipcount = 0;
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_set_win_cap_dimensions(
-					struct video_window *win,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err, err1, err2;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	drv(file, VIDIOC_STREAMOFF, &fmt->type);
-	err1 = drv(file, VIDIOC_G_FMT, fmt);
-	if (err1 < 0)
-		dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %ld\n", err1);
-	if (err1 == 0) {
-		fmt->fmt.pix.width  = win->width;
-		fmt->fmt.pix.height = win->height;
-		fmt->fmt.pix.field  = V4L2_FIELD_ANY;
-		fmt->fmt.pix.bytesperline = 0;
-		err = drv(file, VIDIOC_S_FMT, fmt);
-		if (err < 0)
-			dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %ld\n",
-				err);
-		win->width  = fmt->fmt.pix.width;
-		win->height = fmt->fmt.pix.height;
-	}
-
-	memset(fmt, 0, sizeof(*fmt));
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
-	fmt->fmt.win.w.left    = win->x;
-	fmt->fmt.win.w.top     = win->y;
-	fmt->fmt.win.w.width   = win->width;
-	fmt->fmt.win.w.height  = win->height;
-	fmt->fmt.win.chromakey = win->chromakey;
-	fmt->fmt.win.clips     = (void __user *)win->clips;
-	fmt->fmt.win.clipcount = win->clipcount;
-	err2 = drv(file, VIDIOC_S_FMT, fmt);
-	if (err2 < 0)
-		dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %ld\n", err2);
-
-	if (err1 != 0 && err2 != 0)
-		err = err1;
-	else
-		err = 0;
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_turn_preview_on_off(
-					int *on,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	if (0 == *on) {
-		/* dirty hack time.  But v4l1 has no STREAMOFF
-		 * equivalent in the API, and this one at
-		 * least comes close ... */
-		drv(file, VIDIOC_STREAMOFF, &captype);
-	}
-	err = drv(file, VIDIOC_OVERLAY, on);
-	if (err < 0)
-		dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_input_info(
-					struct video_channel *chan,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_input	input2;
-	v4l2_std_id    		sid;
-
-	memset(&input2, 0, sizeof(input2));
-	input2.index = chan->channel;
-	err = drv(file, VIDIOC_ENUMINPUT, &input2);
-	if (err < 0) {
-		dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: "
-			"channel=%d err=%ld\n", chan->channel, err);
-		goto done;
-	}
-	chan->channel = input2.index;
-	memcpy(chan->name, input2.name,
-	       min(sizeof(chan->name), sizeof(input2.name)));
-	chan->name[sizeof(chan->name) - 1] = 0;
-	chan->tuners = (input2.type == V4L2_INPUT_TYPE_TUNER) ? 1 : 0;
-	chan->flags = (chan->tuners) ? VIDEO_VC_TUNER : 0;
-	switch (input2.type) {
-	case V4L2_INPUT_TYPE_TUNER:
-		chan->type = VIDEO_TYPE_TV;
-		break;
-	default:
-	case V4L2_INPUT_TYPE_CAMERA:
-		chan->type = VIDEO_TYPE_CAMERA;
-		break;
-	}
-	chan->norm = 0;
-	/* Note: G_STD might not be present for radio receivers,
-	 * so we should ignore any errors. */
-	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
-		if (sid & V4L2_STD_PAL)
-			chan->norm = VIDEO_MODE_PAL;
-		if (sid & V4L2_STD_NTSC)
-			chan->norm = VIDEO_MODE_NTSC;
-		if (sid & V4L2_STD_SECAM)
-			chan->norm = VIDEO_MODE_SECAM;
-		if (sid == V4L2_STD_ALL)
-			chan->norm = VIDEO_MODE_AUTO;
-	}
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_input(
-					struct video_channel *chan,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	v4l2_std_id sid = 0;
-
-	err = drv(file, VIDIOC_S_INPUT, &chan->channel);
-	if (err < 0)
-		dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %ld\n", err);
-	switch (chan->norm) {
-	case VIDEO_MODE_PAL:
-		sid = V4L2_STD_PAL;
-		break;
-	case VIDEO_MODE_NTSC:
-		sid = V4L2_STD_NTSC;
-		break;
-	case VIDEO_MODE_SECAM:
-		sid = V4L2_STD_SECAM;
-		break;
-	case VIDEO_MODE_AUTO:
-		sid = V4L2_STD_ALL;
-		break;
-	}
-	if (0 != sid) {
-		err = drv(file, VIDIOC_S_STD, &sid);
-		if (err < 0)
-			dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %ld\n", err);
-	}
-	return err;
-}
-
-static noinline long v4l1_compat_get_picture(
-					struct video_picture *pict,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-
-	pict->brightness = get_v4l_control(file,
-					   V4L2_CID_BRIGHTNESS, drv);
-	pict->hue = get_v4l_control(file,
-				    V4L2_CID_HUE, drv);
-	pict->contrast = get_v4l_control(file,
-					 V4L2_CID_CONTRAST, drv);
-	pict->colour = get_v4l_control(file,
-				       V4L2_CID_SATURATION, drv);
-	pict->whiteness = get_v4l_control(file,
-					  V4L2_CID_WHITENESS, drv);
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-
-	if (fmt->fmt.pix.width)
-	{
-		pict->depth   = ((fmt->fmt.pix.bytesperline << 3)
-				 + (fmt->fmt.pix.width - 1))
-				 / fmt->fmt.pix.width;
-	} else {
-		err = -EINVAL;
-		goto done;
-	}
-
-	pict->palette = pixelformat_to_palette(
-		fmt->fmt.pix.pixelformat);
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_set_picture(
-					struct video_picture *pict,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-	int mem_err = 0, ovl_err = 0;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	set_v4l_control(file,
-			V4L2_CID_BRIGHTNESS, pict->brightness, drv);
-	set_v4l_control(file,
-			V4L2_CID_HUE, pict->hue, drv);
-	set_v4l_control(file,
-			V4L2_CID_CONTRAST, pict->contrast, drv);
-	set_v4l_control(file,
-			V4L2_CID_SATURATION, pict->colour, drv);
-	set_v4l_control(file,
-			V4L2_CID_WHITENESS, pict->whiteness, drv);
-	/*
-	 * V4L1 uses this ioctl to set both memory capture and overlay
-	 * pixel format, while V4L2 has two different ioctls for this.
-	 * Some cards may not support one or the other, and may support
-	 * different pixel formats for memory vs overlay.
-	 */
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	/* If VIDIOC_G_FMT failed, then the driver likely doesn't
-	   support memory capture.  Trying to set the memory capture
-	   parameters would be pointless.  */
-	if (err < 0) {
-		dprintk("VIDIOCSPICT / VIDIOC_G_FMT: %ld\n", err);
-		mem_err = -1000;  /* didn't even try */
-	} else if (fmt->fmt.pix.pixelformat !=
-		 palette_to_pixelformat(pict->palette)) {
-		fmt->fmt.pix.pixelformat = palette_to_pixelformat(
-			pict->palette);
-		mem_err = drv(file, VIDIOC_S_FMT, fmt);
-		if (mem_err < 0)
-			dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n",
-				mem_err);
-	}
-
-	err = drv(file, VIDIOC_G_FBUF, &fbuf);
-	/* If VIDIOC_G_FBUF failed, then the driver likely doesn't
-	   support overlay.  Trying to set the overlay parameters
-	   would be quite pointless.  */
-	if (err < 0) {
-		dprintk("VIDIOCSPICT / VIDIOC_G_FBUF: %ld\n", err);
-		ovl_err = -1000;  /* didn't even try */
-	} else if (fbuf.fmt.pixelformat !=
-		 palette_to_pixelformat(pict->palette)) {
-		fbuf.fmt.pixelformat = palette_to_pixelformat(
-			pict->palette);
-		ovl_err = drv(file, VIDIOC_S_FBUF, &fbuf);
-		if (ovl_err < 0)
-			dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n",
-				ovl_err);
-	}
-	if (ovl_err < 0 && mem_err < 0) {
-		/* ioctl failed, couldn't set either parameter */
-		if (mem_err != -1000)
-			err = mem_err;
-		else if (ovl_err == -EPERM)
-			err = 0;
-		else
-			err = ovl_err;
-	} else
-		err = 0;
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_get_tuner(
-					struct video_tuner *tun,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	int i;
-	struct v4l2_tuner	tun2;
-	struct v4l2_standard	std2;
-	v4l2_std_id    		sid;
-
-	memset(&tun2, 0, sizeof(tun2));
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0) {
-		dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %ld\n", err);
-		goto done;
-	}
-	memcpy(tun->name, tun2.name,
-	       min(sizeof(tun->name), sizeof(tun2.name)));
-	tun->name[sizeof(tun->name) - 1] = 0;
-	tun->rangelow = tun2.rangelow;
-	tun->rangehigh = tun2.rangehigh;
-	tun->flags = 0;
-	tun->mode = VIDEO_MODE_AUTO;
-
-	for (i = 0; i < 64; i++) {
-		memset(&std2, 0, sizeof(std2));
-		std2.index = i;
-		if (0 != drv(file, VIDIOC_ENUMSTD, &std2))
-			break;
-		if (std2.id & V4L2_STD_PAL)
-			tun->flags |= VIDEO_TUNER_PAL;
-		if (std2.id & V4L2_STD_NTSC)
-			tun->flags |= VIDEO_TUNER_NTSC;
-		if (std2.id & V4L2_STD_SECAM)
-			tun->flags |= VIDEO_TUNER_SECAM;
-	}
-
-	/* Note: G_STD might not be present for radio receivers,
-	 * so we should ignore any errors. */
-	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
-		if (sid & V4L2_STD_PAL)
-			tun->mode = VIDEO_MODE_PAL;
-		if (sid & V4L2_STD_NTSC)
-			tun->mode = VIDEO_MODE_NTSC;
-		if (sid & V4L2_STD_SECAM)
-			tun->mode = VIDEO_MODE_SECAM;
-	}
-
-	if (tun2.capability & V4L2_TUNER_CAP_LOW)
-		tun->flags |= VIDEO_TUNER_LOW;
-	if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO)
-		tun->flags |= VIDEO_TUNER_STEREO_ON;
-	tun->signal = tun2.signal;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_select_tuner(
-					struct video_tuner *tun,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_tuner	t;/*84 bytes on x86_64*/
-	memset(&t, 0, sizeof(t));
-
-	t.index = tun->tuner;
-
-	err = drv(file, VIDIOC_S_TUNER, &t);
-	if (err < 0)
-		dprintk("VIDIOCSTUNER / VIDIOC_S_TUNER: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_frequency(
-					unsigned long *freq,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_frequency   freq2;
-	memset(&freq2, 0, sizeof(freq2));
-
-	freq2.tuner = 0;
-	err = drv(file, VIDIOC_G_FREQUENCY, &freq2);
-	if (err < 0)
-		dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %ld\n", err);
-	if (0 == err)
-		*freq = freq2.frequency;
-	return err;
-}
-
-static noinline long v4l1_compat_set_frequency(
-					unsigned long *freq,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_frequency   freq2;
-	memset(&freq2, 0, sizeof(freq2));
-
-	drv(file, VIDIOC_G_FREQUENCY, &freq2);
-	freq2.frequency = *freq;
-	err = drv(file, VIDIOC_S_FREQUENCY, &freq2);
-	if (err < 0)
-		dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_audio(
-					struct video_audio *aud,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	int i;
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_audio	aud2;
-	struct v4l2_tuner	tun2;
-	memset(&aud2, 0, sizeof(aud2));
-
-	err = drv(file, VIDIOC_G_AUDIO, &aud2);
-	if (err < 0) {
-		dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %ld\n", err);
-		goto done;
-	}
-	memcpy(aud->name, aud2.name,
-	       min(sizeof(aud->name), sizeof(aud2.name)));
-	aud->name[sizeof(aud->name) - 1] = 0;
-	aud->audio = aud2.index;
-	aud->flags = 0;
-	i = get_v4l_control(file, V4L2_CID_AUDIO_VOLUME, drv);
-	if (i >= 0) {
-		aud->volume = i;
-		aud->flags |= VIDEO_AUDIO_VOLUME;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_BASS, drv);
-	if (i >= 0) {
-		aud->bass = i;
-		aud->flags |= VIDEO_AUDIO_BASS;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_TREBLE, drv);
-	if (i >= 0) {
-		aud->treble = i;
-		aud->flags |= VIDEO_AUDIO_TREBLE;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_BALANCE, drv);
-	if (i >= 0) {
-		aud->balance = i;
-		aud->flags |= VIDEO_AUDIO_BALANCE;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_MUTE, drv);
-	if (i >= 0) {
-		if (i)
-			aud->flags |= VIDEO_AUDIO_MUTE;
-		aud->flags |= VIDEO_AUDIO_MUTABLE;
-	}
-	aud->step = 1;
-	qctrl2.id = V4L2_CID_AUDIO_VOLUME;
-	if (drv(file, VIDIOC_QUERYCTRL, &qctrl2) == 0 &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED))
-		aud->step = qctrl2.step;
-	aud->mode = 0;
-
-	memset(&tun2, 0, sizeof(tun2));
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0) {
-		dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %ld\n", err);
-		err = 0;
-		goto done;
-	}
-
-	if (tun2.rxsubchans & V4L2_TUNER_SUB_LANG2)
-		aud->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	else if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO)
-		aud->mode = VIDEO_SOUND_STEREO;
-	else if (tun2.rxsubchans & V4L2_TUNER_SUB_MONO)
-		aud->mode = VIDEO_SOUND_MONO;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_audio(
-					struct video_audio *aud,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_audio	aud2;
-	struct v4l2_tuner	tun2;
-
-	memset(&aud2, 0, sizeof(aud2));
-	memset(&tun2, 0, sizeof(tun2));
-
-	aud2.index = aud->audio;
-	err = drv(file, VIDIOC_S_AUDIO, &aud2);
-	if (err < 0) {
-		dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %ld\n", err);
-		goto done;
-	}
-
-	set_v4l_control(file, V4L2_CID_AUDIO_VOLUME,
-			aud->volume, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_BASS,
-			aud->bass, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_TREBLE,
-			aud->treble, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_BALANCE,
-			aud->balance, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_MUTE,
-			!!(aud->flags & VIDEO_AUDIO_MUTE), drv);
-
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0)
-		dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %ld\n", err);
-	if (err == 0) {
-		switch (aud->mode) {
-		default:
-		case VIDEO_SOUND_MONO:
-		case VIDEO_SOUND_LANG1:
-			tun2.audmode = V4L2_TUNER_MODE_MONO;
-			break;
-		case VIDEO_SOUND_STEREO:
-			tun2.audmode = V4L2_TUNER_MODE_STEREO;
-			break;
-		case VIDEO_SOUND_LANG2:
-			tun2.audmode = V4L2_TUNER_MODE_LANG2;
-			break;
-		}
-		err = drv(file, VIDIOC_S_TUNER, &tun2);
-		if (err < 0)
-			dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %ld\n", err);
-	}
-	err = 0;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_capture_frame(
-					struct video_mmap *mm,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type      captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	struct v4l2_buffer	buf;
-	struct v4l2_format	*fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(&buf, 0, sizeof(buf));
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	if (mm->width   != fmt->fmt.pix.width  ||
-	    mm->height  != fmt->fmt.pix.height ||
-	    palette_to_pixelformat(mm->format) !=
-	    fmt->fmt.pix.pixelformat) {
-		/* New capture format...  */
-		fmt->fmt.pix.width = mm->width;
-		fmt->fmt.pix.height = mm->height;
-		fmt->fmt.pix.pixelformat =
-			palette_to_pixelformat(mm->format);
-		fmt->fmt.pix.field = V4L2_FIELD_ANY;
-		fmt->fmt.pix.bytesperline = 0;
-		err = drv(file, VIDIOC_S_FMT, fmt);
-		if (err < 0) {
-			dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %ld\n", err);
-			goto done;
-		}
-	}
-	buf.index = mm->frame;
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_QUERYBUF, &buf);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %ld\n", err);
-		goto done;
-	}
-	err = drv(file, VIDIOC_QBUF, &buf);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %ld\n", err);
-		goto done;
-	}
-	err = drv(file, VIDIOC_STREAMON, &captype);
-	if (err < 0)
-		dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %ld\n", err);
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_sync(
-				int *i,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	struct v4l2_buffer buf;
-	struct poll_wqueues *pwq;
-
-	memset(&buf, 0, sizeof(buf));
-	buf.index = *i;
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_QUERYBUF, &buf);
-	if (err < 0) {
-		/*  No such buffer */
-		dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %ld\n", err);
-		goto done;
-	}
-	if (!(buf.flags & V4L2_BUF_FLAG_MAPPED)) {
-		/* Buffer is not mapped  */
-		err = -EINVAL;
-		goto done;
-	}
-
-	/* make sure capture actually runs so we don't block forever */
-	err = drv(file, VIDIOC_STREAMON, &captype);
-	if (err < 0) {
-		dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %ld\n", err);
-		goto done;
-	}
-
-	pwq = kmalloc(sizeof(*pwq), GFP_KERNEL);
-	/*  Loop as long as the buffer is queued, but not done  */
-	while ((buf.flags & (V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE))
-						== V4L2_BUF_FLAG_QUEUED) {
-		err = poll_one(file, pwq);
-		if (err < 0 ||	/* error or sleep was interrupted  */
-		    err == 0)	/* timeout? Shouldn't occur.  */
-			break;
-		err = drv(file, VIDIOC_QUERYBUF, &buf);
-		if (err < 0)
-			dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %ld\n", err);
-	}
-	kfree(pwq);
-	if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */
-		goto done;
-	do {
-		err = drv(file, VIDIOC_DQBUF, &buf);
-		if (err < 0)
-			dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %ld\n", err);
-	} while (err == 0 && buf.index != *i);
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_get_vbi_format(
-				struct vbi_format *fmt,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt2;
-
-	fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
-	if (!fmt2) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-
-	err = drv(file, VIDIOC_G_FMT, fmt2);
-	if (err < 0) {
-		dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	if (fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY) {
-		err = -EINVAL;
-		goto done;
-	}
-	memset(fmt, 0, sizeof(*fmt));
-	fmt->samples_per_line = fmt2->fmt.vbi.samples_per_line;
-	fmt->sampling_rate    = fmt2->fmt.vbi.sampling_rate;
-	fmt->sample_format    = VIDEO_PALETTE_RAW;
-	fmt->start[0]         = fmt2->fmt.vbi.start[0];
-	fmt->count[0]         = fmt2->fmt.vbi.count[0];
-	fmt->start[1]         = fmt2->fmt.vbi.start[1];
-	fmt->count[1]         = fmt2->fmt.vbi.count[1];
-	fmt->flags            = fmt2->fmt.vbi.flags & 0x03;
-done:
-	kfree(fmt2);
-	return err;
-}
-
-static noinline long v4l1_compat_set_vbi_format(
-				struct vbi_format *fmt,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format	*fmt2 = NULL;
-
-	if (VIDEO_PALETTE_RAW != fmt->sample_format) {
-		err = -EINVAL;
-		return err;
-	}
-
-	fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
-	if (!fmt2) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-	fmt2->fmt.vbi.samples_per_line = fmt->samples_per_line;
-	fmt2->fmt.vbi.sampling_rate    = fmt->sampling_rate;
-	fmt2->fmt.vbi.sample_format    = V4L2_PIX_FMT_GREY;
-	fmt2->fmt.vbi.start[0]         = fmt->start[0];
-	fmt2->fmt.vbi.count[0]         = fmt->count[0];
-	fmt2->fmt.vbi.start[1]         = fmt->start[1];
-	fmt2->fmt.vbi.count[1]         = fmt->count[1];
-	fmt2->fmt.vbi.flags            = fmt->flags;
-	err = drv(file, VIDIOC_TRY_FMT, fmt2);
-	if (err < 0) {
-		dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %ld\n", err);
-		goto done;
-	}
-
-	if (fmt2->fmt.vbi.samples_per_line != fmt->samples_per_line ||
-	    fmt2->fmt.vbi.sampling_rate    != fmt->sampling_rate    ||
-	    fmt2->fmt.vbi.sample_format    != V4L2_PIX_FMT_GREY     ||
-	    fmt2->fmt.vbi.start[0]         != fmt->start[0]         ||
-	    fmt2->fmt.vbi.count[0]         != fmt->count[0]         ||
-	    fmt2->fmt.vbi.start[1]         != fmt->start[1]         ||
-	    fmt2->fmt.vbi.count[1]         != fmt->count[1]         ||
-	    fmt2->fmt.vbi.flags            != fmt->flags) {
-		err = -EINVAL;
-		goto done;
-	}
-	err = drv(file, VIDIOC_S_FMT, fmt2);
-	if (err < 0)
-		dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %ld\n", err);
-done:
-	kfree(fmt2);
-	return err;
-}
-
-/*
- *	This function is exported.
- */
-long
-v4l_compat_translate_ioctl(struct file		*file,
-			   int			cmd,
-			   void			*arg,
-			   v4l2_kioctl          drv)
-{
-	long err;
-
-	switch (cmd) {
-	case VIDIOCGCAP:	/* capability */
-		err = v4l1_compat_get_capabilities(arg, file, drv);
-		break;
-	case VIDIOCGFBUF: /*  get frame buffer  */
-		err = v4l1_compat_get_frame_buffer(arg, file, drv);
-		break;
-	case VIDIOCSFBUF: /*  set frame buffer  */
-		err = v4l1_compat_set_frame_buffer(arg, file, drv);
-		break;
-	case VIDIOCGWIN: /*  get window or capture dimensions  */
-		err = v4l1_compat_get_win_cap_dimensions(arg, file, drv);
-		break;
-	case VIDIOCSWIN: /*  set window and/or capture dimensions  */
-		err = v4l1_compat_set_win_cap_dimensions(arg, file, drv);
-		break;
-	case VIDIOCCAPTURE: /*  turn on/off preview  */
-		err = v4l1_compat_turn_preview_on_off(arg, file, drv);
-		break;
-	case VIDIOCGCHAN: /*  get input information  */
-		err = v4l1_compat_get_input_info(arg, file, drv);
-		break;
-	case VIDIOCSCHAN: /*  set input  */
-		err = v4l1_compat_set_input(arg, file, drv);
-		break;
-	case VIDIOCGPICT: /*  get tone controls & partial capture format  */
-		err = v4l1_compat_get_picture(arg, file, drv);
-		break;
-	case VIDIOCSPICT: /*  set tone controls & partial capture format  */
-		err = v4l1_compat_set_picture(arg, file, drv);
-		break;
-	case VIDIOCGTUNER: /*  get tuner information  */
-		err = v4l1_compat_get_tuner(arg, file, drv);
-		break;
-	case VIDIOCSTUNER: /*  select a tuner input  */
-		err = v4l1_compat_select_tuner(arg, file, drv);
-		break;
-	case VIDIOCGFREQ: /*  get frequency  */
-		err = v4l1_compat_get_frequency(arg, file, drv);
-		break;
-	case VIDIOCSFREQ: /*  set frequency  */
-		err = v4l1_compat_set_frequency(arg, file, drv);
-		break;
-	case VIDIOCGAUDIO: /*  get audio properties/controls  */
-		err = v4l1_compat_get_audio(arg, file, drv);
-		break;
-	case VIDIOCSAUDIO: /*  set audio controls  */
-		err = v4l1_compat_set_audio(arg, file, drv);
-		break;
-	case VIDIOCMCAPTURE: /*  capture a frame  */
-		err = v4l1_compat_capture_frame(arg, file, drv);
-		break;
-	case VIDIOCSYNC: /*  wait for a frame  */
-		err = v4l1_compat_sync(arg, file, drv);
-		break;
-	case VIDIOCGVBIFMT: /* query VBI data capture format */
-		err = v4l1_compat_get_vbi_format(arg, file, drv);
-		break;
-	case VIDIOCSVBIFMT:
-		err = v4l1_compat_set_vbi_format(arg, file, drv);
-		break;
-	default:
-		err = -ENOIOCTLCMD;
-		break;
-	}
-
-	return err;
-}
-EXPORT_SYMBOL(v4l_compat_translate_ioctl);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index e30e8dfb6205..425ac1e4a00e 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -22,212 +22,6 @@
 
 #ifdef CONFIG_COMPAT
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-struct video_tuner32 {
-	compat_int_t tuner;
-	char name[32];
-	compat_ulong_t rangelow, rangehigh;
-	u32 flags;	/* It is really u32 in videodev.h */
-	u16 mode, signal;
-};
-
-static int get_video_tuner32(struct video_tuner *kp, struct video_tuner32 __user *up)
-{
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_tuner32)) ||
-		get_user(kp->tuner, &up->tuner) ||
-		copy_from_user(kp->name, up->name, 32) ||
-		get_user(kp->rangelow, &up->rangelow) ||
-		get_user(kp->rangehigh, &up->rangehigh) ||
-		get_user(kp->flags, &up->flags) ||
-		get_user(kp->mode, &up->mode) ||
-		get_user(kp->signal, &up->signal))
-		return -EFAULT;
-	return 0;
-}
-
-static int put_video_tuner32(struct video_tuner *kp, struct video_tuner32 __user *up)
-{
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_tuner32)) ||
-		put_user(kp->tuner, &up->tuner) ||
-		copy_to_user(up->name, kp->name, 32) ||
-		put_user(kp->rangelow, &up->rangelow) ||
-		put_user(kp->rangehigh, &up->rangehigh) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->mode, &up->mode) ||
-		put_user(kp->signal, &up->signal))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_buffer32 {
-	compat_caddr_t base;
-	compat_int_t height, width, depth, bytesperline;
-};
-
-static int get_video_buffer32(struct video_buffer *kp, struct video_buffer32 __user *up)
-{
-	u32 tmp;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_buffer32)) ||
-		get_user(tmp, &up->base) ||
-		get_user(kp->height, &up->height) ||
-		get_user(kp->width, &up->width) ||
-		get_user(kp->depth, &up->depth) ||
-		get_user(kp->bytesperline, &up->bytesperline))
-			return -EFAULT;
-
-	/* This is actually a physical address stored
-	 * as a void pointer.
-	 */
-	kp->base = (void *)(unsigned long) tmp;
-
-	return 0;
-}
-
-static int put_video_buffer32(struct video_buffer *kp, struct video_buffer32 __user *up)
-{
-	u32 tmp = (u32)((unsigned long)kp->base);
-
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_buffer32)) ||
-		put_user(tmp, &up->base) ||
-		put_user(kp->height, &up->height) ||
-		put_user(kp->width, &up->width) ||
-		put_user(kp->depth, &up->depth) ||
-		put_user(kp->bytesperline, &up->bytesperline))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_clip32 {
-	s32 x, y, width, height;	/* It's really s32 in videodev.h */
-	compat_caddr_t next;
-};
-
-struct video_window32 {
-	u32 x, y, width, height, chromakey, flags;
-	compat_caddr_t clips;
-	compat_int_t clipcount;
-};
-
-static int get_video_window32(struct video_window *kp, struct video_window32 __user *up)
-{
-	struct video_clip __user *uclips;
-	struct video_clip __user *kclips;
-	compat_caddr_t p;
-	int nclips;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_window32)))
-		return -EFAULT;
-
-	if (get_user(nclips, &up->clipcount))
-		return -EFAULT;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_window32)) ||
-	    get_user(kp->x, &up->x) ||
-	    get_user(kp->y, &up->y) ||
-	    get_user(kp->width, &up->width) ||
-	    get_user(kp->height, &up->height) ||
-	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->flags, &up->flags) ||
-	    get_user(kp->clipcount, &up->clipcount))
-		return -EFAULT;
-
-	nclips = kp->clipcount;
-	kp->clips = NULL;
-
-	if (nclips == 0)
-		return 0;
-	if (get_user(p, &up->clips))
-		return -EFAULT;
-	uclips = compat_ptr(p);
-
-	/* If nclips < 0, then it is a clipping bitmap of size
-	   VIDEO_CLIPMAP_SIZE */
-	if (nclips < 0) {
-		if (!access_ok(VERIFY_READ, uclips, VIDEO_CLIPMAP_SIZE))
-			return -EFAULT;
-		kp->clips = compat_alloc_user_space(VIDEO_CLIPMAP_SIZE);
-		if (copy_in_user(kp->clips, uclips, VIDEO_CLIPMAP_SIZE))
-			return -EFAULT;
-		return 0;
-	}
-
-	/* Otherwise it is an array of video_clip structs. */
-	if (!access_ok(VERIFY_READ, uclips, nclips * sizeof(struct video_clip)))
-		return -EFAULT;
-
-	kp->clips = compat_alloc_user_space(nclips * sizeof(struct video_clip));
-	kclips = kp->clips;
-	while (nclips--) {
-		int err;
-
-		err = copy_in_user(&kclips->x, &uclips->x, sizeof(kclips->x));
-		err |= copy_in_user(&kclips->y, &uclips->y, sizeof(kclips->y));
-		err |= copy_in_user(&kclips->width, &uclips->width, sizeof(kclips->width));
-		err |= copy_in_user(&kclips->height, &uclips->height, sizeof(kclips->height));
-		kclips->next = NULL;
-		if (err)
-			return -EFAULT;
-		kclips++;
-		uclips++;
-	}
-	return 0;
-}
-
-/* You get back everything except the clips... */
-static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
-{
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_window32)) ||
-		put_user(kp->x, &up->x) ||
-		put_user(kp->y, &up->y) ||
-		put_user(kp->width, &up->width) ||
-		put_user(kp->height, &up->height) ||
-		put_user(kp->chromakey, &up->chromakey) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_code32 {
-	char		loadwhat[16];	/* name or tag of file being passed */
-	compat_int_t	datasize;
-	compat_uptr_t	data;
-};
-
-static struct video_code __user *get_microcode32(struct video_code32 *kp)
-{
-	struct video_code __user *up;
-
-	up = compat_alloc_user_space(sizeof(*up));
-
-	/*
-	 * NOTE! We don't actually care if these fail. If the
-	 * user address is invalid, the native ioctl will do
-	 * the error handling for us
-	 */
-	(void) copy_to_user(up->loadwhat, kp->loadwhat, sizeof(up->loadwhat));
-	(void) put_user(kp->datasize, &up->datasize);
-	(void) put_user(compat_ptr(kp->data), &up->data);
-	return up;
-}
-
-#define VIDIOCGTUNER32		_IOWR('v', 4, struct video_tuner32)
-#define VIDIOCSTUNER32		_IOW('v', 5, struct video_tuner32)
-#define VIDIOCGWIN32		_IOR('v', 9, struct video_window32)
-#define VIDIOCSWIN32		_IOW('v', 10, struct video_window32)
-#define VIDIOCGFBUF32		_IOR('v', 11, struct video_buffer32)
-#define VIDIOCSFBUF32		_IOW('v', 12, struct video_buffer32)
-#define VIDIOCGFREQ32		_IOR('v', 14, u32)
-#define VIDIOCSFREQ32		_IOW('v', 15, u32)
-#define VIDIOCSMICROCODE32	_IOW('v', 27, struct video_code32)
-
-#define VIDIOCCAPTURE32		_IOW('v', 8, s32)
-#define VIDIOCSYNC32		_IOW('v', 18, s32)
-#define VIDIOCSWRITEMODE32	_IOW('v', 25, s32)
-
-#endif
-
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret = -ENOIOCTLCMD;
@@ -741,13 +535,6 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	union {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-		struct video_tuner vt;
-		struct video_buffer vb;
-		struct video_window vw;
-		struct video_code32 vc;
-		struct video_audio va;
-#endif
 		struct v4l2_format v2f;
 		struct v4l2_buffer v2b;
 		struct v4l2_framebuffer v2fb;
@@ -763,17 +550,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 
 	/* First, convert the command. */
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
-	case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
-	case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
-	case VIDIOCSWIN32: cmd = VIDIOCSWIN; break;
-	case VIDIOCGFBUF32: cmd = VIDIOCGFBUF; break;
-	case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
-	case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
-	case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
-	case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
-#endif
 	case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
 	case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
 	case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -800,46 +576,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 	}
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCSTUNER:
-	case VIDIOCGTUNER:
-		err = get_video_tuner32(&karg.vt, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSFBUF:
-		err = get_video_buffer32(&karg.vb, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSWIN:
-		err = get_video_window32(&karg.vw, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCGWIN:
-	case VIDIOCGFBUF:
-	case VIDIOCGFREQ:
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSMICROCODE:
-		/* Copy the 32-bit "video_code32" to kernel space */
-		if (copy_from_user(&karg.vc, up, sizeof(karg.vc)))
-			return -EFAULT;
-		/* Convert the 32-bit version to a 64-bit version in user space */
-		up = get_microcode32(&karg.vc);
-		break;
-
-	case VIDIOCSFREQ:
-		err = get_user(karg.vx, (u32 __user *)up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCCAPTURE:
-	case VIDIOCSYNC:
-	case VIDIOCSWRITEMODE:
-#endif
 	case VIDIOC_OVERLAY:
 	case VIDIOC_STREAMON:
 	case VIDIOC_STREAMOFF:
@@ -922,23 +658,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		return err;
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGTUNER:
-		err = put_video_tuner32(&karg.vt, up);
-		break;
-
-	case VIDIOCGWIN:
-		err = put_video_window32(&karg.vw, up);
-		break;
-
-	case VIDIOCGFBUF:
-		err = put_video_buffer32(&karg.vb, up);
-		break;
-
-	case VIDIOCGFREQ:
-		err = put_user(((u32)karg.vx), (u32 __user *)up);
-		break;
-#endif
 	case VIDIOC_S_INPUT:
 	case VIDIOC_S_OUTPUT:
 	case VIDIOC_G_INPUT:
@@ -981,37 +700,6 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		return ret;
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGCAP:
-	case VIDIOCGCHAN:
-	case VIDIOCSCHAN:
-	case VIDIOCGTUNER32:
-	case VIDIOCSTUNER32:
-	case VIDIOCGPICT:
-	case VIDIOCSPICT:
-	case VIDIOCCAPTURE32:
-	case VIDIOCGWIN32:
-	case VIDIOCSWIN32:
-	case VIDIOCGFBUF32:
-	case VIDIOCSFBUF32:
-	case VIDIOCKEY:
-	case VIDIOCGFREQ32:
-	case VIDIOCSFREQ32:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-	case VIDIOCSYNC32:
-	case VIDIOCMCAPTURE:
-	case VIDIOCGMBUF:
-	case VIDIOCGUNIT:
-	case VIDIOCGCAPTURE:
-	case VIDIOCSCAPTURE:
-	case VIDIOCSPLAYMODE:
-	case VIDIOCSWRITEMODE32:
-	case VIDIOCGPLAYINFO:
-	case VIDIOCSMICROCODE32:
-	case VIDIOCGVBIFMT:
-	case VIDIOCSVBIFMT:
-#endif
 #ifdef __OLD_VIDIOC_
 	case VIDIOC_OVERLAY32_OLD:
 	case VIDIOC_S_PARM_OLD:
@@ -1096,19 +784,6 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		ret = do_video_ioctl(file, cmd, arg);
 		break;
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/* BTTV specific... */
-	case _IOW('v',  BASE_VIDIOCPRIVATE+0, char [256]):
-	case _IOR('v',  BASE_VIDIOCPRIVATE+1, char [256]):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+2, unsigned int):
-	case _IOW('v' , BASE_VIDIOCPRIVATE+3, char [16]): /* struct bttv_pll_info */
-	case _IOR('v' , BASE_VIDIOCPRIVATE+4, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+5, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+6, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
-		ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
-		break;
-#endif
 	default:
 		printk(KERN_WARNING "compat_ioctl32: "
 			"unknown ioctl '%c', dir=%d, #%d (0x%08x)\n",
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index dd9283fcb564..7e47f15f350d 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -18,12 +18,8 @@
 #include <linux/kernel.h>
 
 #define __OLD_VIDIOC_ /* To allow fixing old calls */
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 
-#ifdef CONFIG_VIDEO_V4L1
-#include <linux/videodev.h>
-#endif
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
@@ -183,42 +179,6 @@ static const char *v4l2_memory_names[] = {
 
 /* ------------------------------------------------------------------ */
 /* debug help functions                                               */
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static const char *v4l1_ioctls[] = {
-	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
-	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
-	[_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
-	[_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
-	[_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
-	[_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
-	[_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
-	[_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
-	[_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
-	[_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
-	[_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
-	[_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
-	[_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
-	[_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
-	[_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
-	[_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
-	[_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
-	[_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
-	[_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
-	[_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
-	[_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
-	[_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
-	[_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
-	[_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
-	[_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
-	[_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
-	[_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
-	[_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
-	[_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
-};
-#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
-#endif
-
 static const char *v4l2_ioctls[] = {
 	[_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
 	[_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
@@ -310,15 +270,6 @@ void v4l_printk_ioctl(unsigned int cmd)
 	case 'd':
 		type = "v4l2_int";
 		break;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case 'v':
-		if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
-			type = "v4l1";
-			break;
-		}
-		printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
-		return;
-#endif
 	case 'V':
 		if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
 			type = "v4l2";
@@ -622,20 +573,6 @@ static long __video_do_ioctl(struct file *file,
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/********************************************************
-	 All other V4L1 calls are handled by v4l1_compat module.
-	 Those calls will be translated into V4L2 calls, and
-	 __video_do_ioctl will be called again, with one or more
-	 V4L2 ioctls.
-	 ********************************************************/
-	if (_IOC_TYPE(cmd) == 'v' && cmd != VIDIOCGMBUF &&
-				_IOC_NR(cmd) < BASE_VIDIOCPRIVATE) {
-		return v4l_compat_translate_ioctl(file, cmd, arg,
-						__video_do_ioctl);
-	}
-#endif
-
 	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
 				!(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
 		v4l_print_ioctl(vfd->name, cmd);
@@ -644,29 +581,6 @@ static long __video_do_ioctl(struct file *file,
 
 	switch (cmd) {
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/***********************************************************
-	 Handles calls to the obsoleted V4L1 API
-	 Due to the nature of VIDIOCGMBUF, each driver that supports
-	 V4L1 should implement its own handler for this ioctl.
-	 ***********************************************************/
-
-	/* --- streaming capture ------------------------------------- */
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *p = arg;
-
-		if (!ops->vidiocgmbuf)
-			break;
-		ret = ops->vidiocgmbuf(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
-						p->size, p->frames,
-						(unsigned long)p->offsets);
-		break;
-	}
-#endif
-
 	/* --- capabilities ------------------------------------------ */
 	case VIDIOC_QUERYCAP:
 	{
diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index 9eda7cc03121..e25aca5759fb 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -1161,16 +1161,6 @@ out:
 	return ret;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int viacam_vidiocgmbuf(struct file *filp, void *priv,
-		struct video_mbuf *mbuf)
-{
-	struct via_camera *cam = priv;
-
-	return videobuf_cgmbuf(&cam->vb_queue, mbuf, 6);
-}
-#endif
-
 /* G/S_PARM */
 
 static int viacam_g_parm(struct file *filp, void *priv,
@@ -1251,9 +1241,6 @@ static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
 	.vidioc_s_parm		= viacam_s_parm,
 	.vidioc_enum_framesizes = viacam_enum_framesizes,
 	.vidioc_enum_frameintervals = viacam_enum_frameintervals,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf		= viacam_vidiocgmbuf,
-#endif
 };
 
 /*----------------------------------------------------------------------------*/
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 8979f91fa8e5..de4fa4eb8844 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -1202,33 +1202,3 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma)
 	return rc;
 }
 EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int videobuf_cgmbuf(struct videobuf_queue *q,
-		    struct video_mbuf *mbuf, int count)
-{
-	struct v4l2_requestbuffers req;
-	int rc, i;
-
-	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
-
-	memset(&req, 0, sizeof(req));
-	req.type   = q->type;
-	req.count  = count;
-	req.memory = V4L2_MEMORY_MMAP;
-	rc = videobuf_reqbufs(q, &req);
-	if (rc < 0)
-		return rc;
-
-	mbuf->frames = req.count;
-	mbuf->size   = 0;
-	for (i = 0; i < mbuf->frames; i++) {
-		mbuf->offsets[i]  = q->bufs[i]->boff;
-		mbuf->size       += PAGE_ALIGN(q->bufs[i]->bsize);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(videobuf_cgmbuf);
-#endif
-
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index ab684e807034..9d520601c70f 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -570,29 +570,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 	}
 
 	last = first;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	if (size != (vma->vm_end - vma->vm_start)) {
-		/* look for last buffer to map */
-		for (last = first + 1; last < VIDEO_MAX_FRAME; last++) {
-			if (NULL == q->bufs[last])
-				continue;
-			if (V4L2_MEMORY_MMAP != q->bufs[last]->memory)
-				continue;
-			if (q->bufs[last]->map) {
-				retval = -EBUSY;
-				goto done;
-			}
-			size += PAGE_ALIGN(q->bufs[last]->bsize);
-			if (size == (vma->vm_end - vma->vm_start))
-				break;
-		}
-		if (VIDEO_MAX_FRAME == last) {
-			dprintk(1, "mmap app bug: size invalid [size=0x%lx]\n",
-					(vma->vm_end - vma->vm_start));
-			goto done;
-		}
-	}
-#endif
 
 	/* create mapping + update buffer list */
 	retval = -ENOMEM;
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 9797e5a69265..c49c39386bd0 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -870,15 +870,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 				file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct vivi_dev *dev = video_drvdata(file);
-
-	return videobuf_cgmbuf(&dev->vb_vidq, mbuf, 8);
-}
-#endif
-
 static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct vivi_dev *dev = video_drvdata(file);
@@ -1105,9 +1096,6 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
 	.vidioc_queryctrl     = vidioc_queryctrl,
 	.vidioc_g_ctrl        = vidioc_g_ctrl,
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 };
 
 static struct video_device vivi_template = {
-- 
cgit v1.2.3


From ad1ecf8639e51ab8066cd4f37fd36b6b7cbdd8b3 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 06:58:01 -0300
Subject: [media] zoran: remove V4L1 compat code and zoran custom ioctls

All the functionality is now handled through V4L2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran/zoran.h        | 107 -----------
 drivers/media/video/zoran/zoran_card.c   |   2 +-
 drivers/media/video/zoran/zoran_driver.c | 321 -------------------------------
 3 files changed, 1 insertion(+), 429 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 27f05551183f..4bb368e6fd47 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -33,15 +33,6 @@
 
 #include <media/v4l2-device.h>
 
-#define ZORAN_VIDMODE_PAL	0
-#define ZORAN_VIDMODE_NTSC	1
-#define ZORAN_VIDMODE_SECAM	2
-
-struct zoran_requestbuffers {
-	unsigned long count;	/* Number of buffers for MJPEG grabbing */
-	unsigned long size;	/* Size PER BUFFER in bytes */
-};
-
 struct zoran_sync {
 	unsigned long frame;	/* number of buffer that has been free'd */
 	unsigned long length;	/* number of code bytes in buffer (capture only) */
@@ -49,102 +40,6 @@ struct zoran_sync {
 	struct timeval timestamp;	/* timestamp */
 };
 
-struct zoran_status {
-	int input;		/* Input channel, has to be set prior to BUZIOC_G_STATUS */
-	int signal;		/* Returned: 1 if valid video signal detected */
-	int norm;		/* Returned: ZORAN_VIDMODE_PAL or ZORAN_VIDMODE_NTSC */
-	int color;		/* Returned: 1 if color signal detected */
-};
-
-struct zoran_params {
-
-	/* The following parameters can only be queried */
-
-	int major_version;	/* Major version number of driver */
-	int minor_version;	/* Minor version number of driver */
-
-	/* Main control parameters */
-
-	int input;		/* Input channel: 0 = Composite, 1 = S-VHS */
-	int norm;		/* Norm: ZORAN_VIDMODE_PAL or ZORAN_VIDMODE_NTSC */
-	int decimation;		/* decimation of captured video,
-				 * enlargement of video played back.
-				 * Valid values are 1, 2, 4 or 0.
-				 * 0 is a special value where the user
-				 * has full control over video scaling */
-
-	/* The following parameters only have to be set if decimation==0,
-	 * for other values of decimation they provide the data how the image is captured */
-
-	int HorDcm;		/* Horizontal decimation: 1, 2 or 4 */
-	int VerDcm;		/* Vertical decimation: 1 or 2 */
-	int TmpDcm;		/* Temporal decimation: 1 or 2,
-				 * if TmpDcm==2 in capture every second frame is dropped,
-				 * in playback every frame is played twice */
-	int field_per_buff;	/* Number of fields per buffer: 1 or 2 */
-	int img_x;		/* start of image in x direction */
-	int img_y;		/* start of image in y direction */
-	int img_width;		/* image width BEFORE decimation,
-				 * must be a multiple of HorDcm*16 */
-	int img_height;		/* image height BEFORE decimation,
-				 * must be a multiple of VerDcm*8 */
-
-	/* --- End of parameters for decimation==0 only --- */
-
-	/* JPEG control parameters */
-
-	int quality;		/* Measure for quality of compressed images.
-				 * Scales linearly with the size of the compressed images.
-				 * Must be beetween 0 and 100, 100 is a compression
-				 * ratio of 1:4 */
-
-	int odd_even;		/* Which field should come first ??? */
-
-	int APPn;		/* Number of APP segment to be written, must be 0..15 */
-	int APP_len;		/* Length of data in JPEG APPn segment */
-	char APP_data[60];	/* Data in the JPEG APPn segment. */
-
-	int COM_len;		/* Length of data in JPEG COM segment */
-	char COM_data[60];	/* Data in JPEG COM segment */
-
-	unsigned long jpeg_markers;	/* Which markers should go into the JPEG output.
-					 * Unless you exactly know what you do, leave them untouched.
-					 * Inluding less markers will make the resulting code
-					 * smaller, but there will be fewer applications
-					 * which can read it.
-					 * The presence of the APP and COM marker is
-					 * influenced by APP0_len and COM_len ONLY! */
-#define JPEG_MARKER_DHT (1<<3)	/* Define Huffman Tables */
-#define JPEG_MARKER_DQT (1<<4)	/* Define Quantization Tables */
-#define JPEG_MARKER_DRI (1<<5)	/* Define Restart Interval */
-#define JPEG_MARKER_COM (1<<6)	/* Comment segment */
-#define JPEG_MARKER_APP (1<<7)	/* App segment, driver will allways use APP0 */
-
-	int VFIFO_FB;		/* Flag for enabling Video Fifo Feedback.
-				 * If this flag is turned on and JPEG decompressing
-				 * is going to the screen, the decompress process
-				 * is stopped every time the Video Fifo is full.
-				 * This enables a smooth decompress to the screen
-				 * but the video output signal will get scrambled */
-
-	/* Misc */
-
-	char reserved[312];	/* Makes 512 bytes for this structure */
-};
-
-/*
-Private IOCTL to set up for displaying MJPEG
-*/
-#define BUZIOC_G_PARAMS       _IOR ('v', BASE_VIDIOC_PRIVATE+0,  struct zoran_params)
-#define BUZIOC_S_PARAMS       _IOWR('v', BASE_VIDIOC_PRIVATE+1,  struct zoran_params)
-#define BUZIOC_REQBUFS        _IOWR('v', BASE_VIDIOC_PRIVATE+2,  struct zoran_requestbuffers)
-#define BUZIOC_QBUF_CAPT      _IOW ('v', BASE_VIDIOC_PRIVATE+3,  int)
-#define BUZIOC_QBUF_PLAY      _IOW ('v', BASE_VIDIOC_PRIVATE+4,  int)
-#define BUZIOC_SYNC           _IOR ('v', BASE_VIDIOC_PRIVATE+5,  struct zoran_sync)
-#define BUZIOC_G_STATUS       _IOWR('v', BASE_VIDIOC_PRIVATE+6,  struct zoran_status)
-
-
-#ifdef __KERNEL__
 
 #define MAJOR_VERSION 0		/* driver major version */
 #define MINOR_VERSION 10	/* driver minor version */
@@ -507,6 +402,4 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
 #define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
 #define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
 
-#endif				/* __kernel__ */
-
 #endif
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index e520abf9f4c3..9cdc3bb15b15 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -943,7 +943,7 @@ zoran_open_init_params (struct zoran *zr)
 	memset(zr->jpg_settings.jpg_comp.COM_data, 0,
 	       sizeof(zr->jpg_settings.jpg_comp.COM_data));
 	zr->jpg_settings.jpg_comp.jpeg_markers =
-	    JPEG_MARKER_DHT | JPEG_MARKER_DQT;
+	    V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT;
 	i = zoran_check_jpg_settings(zr, &zr->jpg_settings, 0);
 	if (i)
 		dprintk(1, KERN_ERR "%s: %s internal error\n",
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 67a52e844ae6..1b67b1914038 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1528,323 +1528,6 @@ zoran_set_input (struct zoran *zr,
  *   ioctl routine
  */
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static long zoran_default(struct file *file, void *__fh, int cmd, void *arg)
-{
-	struct zoran_fh *fh = __fh;
-	struct zoran *zr = fh->zr;
-	struct zoran_jpg_settings settings;
-
-	switch (cmd) {
-	case BUZIOC_G_PARAMS:
-	{
-		struct zoran_params *bparams = arg;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_G_PARAMS\n", ZR_DEVNAME(zr));
-
-		memset(bparams, 0, sizeof(struct zoran_params));
-		bparams->major_version = MAJOR_VERSION;
-		bparams->minor_version = MINOR_VERSION;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->norm & V4L2_STD_NTSC)
-			bparams->norm = ZORAN_VIDMODE_NTSC;
-		else if (zr->norm & V4L2_STD_SECAM)
-			bparams->norm = ZORAN_VIDMODE_SECAM;
-		else
-			bparams->norm = ZORAN_VIDMODE_PAL;
-
-		bparams->input = zr->input;
-
-		bparams->decimation = fh->jpg_settings.decimation;
-		bparams->HorDcm = fh->jpg_settings.HorDcm;
-		bparams->VerDcm = fh->jpg_settings.VerDcm;
-		bparams->TmpDcm = fh->jpg_settings.TmpDcm;
-		bparams->field_per_buff = fh->jpg_settings.field_per_buff;
-		bparams->img_x = fh->jpg_settings.img_x;
-		bparams->img_y = fh->jpg_settings.img_y;
-		bparams->img_width = fh->jpg_settings.img_width;
-		bparams->img_height = fh->jpg_settings.img_height;
-		bparams->odd_even = fh->jpg_settings.odd_even;
-
-		bparams->quality = fh->jpg_settings.jpg_comp.quality;
-		bparams->APPn = fh->jpg_settings.jpg_comp.APPn;
-		bparams->APP_len = fh->jpg_settings.jpg_comp.APP_len;
-		memcpy(bparams->APP_data,
-		       fh->jpg_settings.jpg_comp.APP_data,
-		       sizeof(bparams->APP_data));
-		bparams->COM_len = zr->jpg_settings.jpg_comp.COM_len;
-		memcpy(bparams->COM_data,
-		       fh->jpg_settings.jpg_comp.COM_data,
-		       sizeof(bparams->COM_data));
-		bparams->jpeg_markers =
-		    fh->jpg_settings.jpg_comp.jpeg_markers;
-
-		mutex_unlock(&zr->resource_lock);
-
-		bparams->VFIFO_FB = 0;
-
-		return 0;
-	}
-
-	case BUZIOC_S_PARAMS:
-	{
-		struct zoran_params *bparams = arg;
-		int res = 0;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_S_PARAMS\n", ZR_DEVNAME(zr));
-
-		settings.decimation = bparams->decimation;
-		settings.HorDcm = bparams->HorDcm;
-		settings.VerDcm = bparams->VerDcm;
-		settings.TmpDcm = bparams->TmpDcm;
-		settings.field_per_buff = bparams->field_per_buff;
-		settings.img_x = bparams->img_x;
-		settings.img_y = bparams->img_y;
-		settings.img_width = bparams->img_width;
-		settings.img_height = bparams->img_height;
-		settings.odd_even = bparams->odd_even;
-
-		settings.jpg_comp.quality = bparams->quality;
-		settings.jpg_comp.APPn = bparams->APPn;
-		settings.jpg_comp.APP_len = bparams->APP_len;
-		memcpy(settings.jpg_comp.APP_data, bparams->APP_data,
-		       sizeof(bparams->APP_data));
-		settings.jpg_comp.COM_len = bparams->COM_len;
-		memcpy(settings.jpg_comp.COM_data, bparams->COM_data,
-		       sizeof(bparams->COM_data));
-		settings.jpg_comp.jpeg_markers = bparams->jpeg_markers;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_S_PARAMS called, but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			res = -EINVAL;
-			goto sparams_unlock_and_return;
-		}
-
-		/* Check the params first before overwriting our
-		 * nternal values */
-		if (zoran_check_jpg_settings(zr, &settings, 0)) {
-			res = -EINVAL;
-			goto sparams_unlock_and_return;
-		}
-
-		fh->jpg_settings = settings;
-sparams_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_REQBUFS:
-	{
-		struct zoran_requestbuffers *breq = arg;
-		int res = 0;
-
-		dprintk(3,
-			KERN_DEBUG
-			"%s: BUZIOC_REQBUFS - count=%lu, size=%lu\n",
-			ZR_DEVNAME(zr), breq->count, breq->size);
-
-		/* Enforce reasonable lower and upper limits */
-		if (breq->count < 4)
-			breq->count = 4;	/* Could be choosen smaller */
-		if (breq->count > jpg_nbufs)
-			breq->count = jpg_nbufs;
-		breq->size = PAGE_ALIGN(breq->size);
-		if (breq->size < 8192)
-			breq->size = 8192;	/* Arbitrary */
-		/* breq->size is limited by 1 page for the stat_com
-		 * tables to a Maximum of 2 MB */
-		if (breq->size > jpg_bufsize)
-			breq->size = jpg_bufsize;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (fh->buffers.allocated) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_REQBUFS - buffers already allocated\n",
-				ZR_DEVNAME(zr));
-			res = -EBUSY;
-			goto jpgreqbuf_unlock_and_return;
-		}
-
-		/* The next mmap will map the MJPEG buffers - could
-		 * also be *_PLAY, but it doesn't matter here */
-		map_mode_jpg(fh, 0);
-		fh->buffers.num_buffers = breq->count;
-		fh->buffers.buffer_size = breq->size;
-
-		if (jpg_fbuffer_alloc(fh)) {
-			res = -ENOMEM;
-			goto jpgreqbuf_unlock_and_return;
-		}
-
-jpgreqbuf_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_QBUF_CAPT:
-	{
-		int *frame = arg, res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_CAPT - frame=%d\n",
-			ZR_DEVNAME(zr), *frame);
-
-		mutex_lock(&zr->resource_lock);
-		res = jpg_qbuf(fh, *frame, BUZ_MODE_MOTION_COMPRESS);
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_QBUF_PLAY:
-	{
-		int *frame = arg, res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_PLAY - frame=%d\n",
-			ZR_DEVNAME(zr), *frame);
-
-		mutex_lock(&zr->resource_lock);
-		res = jpg_qbuf(fh, *frame, BUZ_MODE_MOTION_DECOMPRESS);
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_SYNC:
-	{
-		struct zoran_sync *bsync = arg;
-		int res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_SYNC\n", ZR_DEVNAME(zr));
-
-		mutex_lock(&zr->resource_lock);
-
-		if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
-			dprintk(2, KERN_WARNING
-				"%s: %s - not in jpg capture mode\n",
-				ZR_DEVNAME(zr), __func__);
-			res = -EINVAL;
-		} else {
-			res = jpg_sync(fh, bsync);
-		}
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_G_STATUS:
-	{
-		struct zoran_status *bstat = arg;
-		int status = 0, res = 0;
-		v4l2_std_id norm;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_G_STATUS\n", ZR_DEVNAME(zr));
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_G_STATUS called but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			return -EINVAL;
-		}
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_G_STATUS called, but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			res = -EINVAL;
-			goto gstat_unlock_and_return;
-		}
-
-		decoder_call(zr, video, s_routing,
-				zr->card.input[bstat->input].muxsel, 0, 0);
-
-		/* sleep 1 second */
-		ssleep(1);
-
-		/* Get status of video decoder */
-		decoder_call(zr, video, querystd, &norm);
-		decoder_call(zr, video, g_input_status, &status);
-
-		/* restore previous input and norm */
-		decoder_call(zr, video, s_routing,
-				zr->card.input[zr->input].muxsel, 0, 0);
-gstat_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		if (!res) {
-			bstat->signal =
-			    (status & V4L2_IN_ST_NO_SIGNAL) ? 0 : 1;
-			if (norm & V4L2_STD_NTSC)
-				bstat->norm = ZORAN_VIDMODE_NTSC;
-			else if (norm & V4L2_STD_SECAM)
-				bstat->norm = ZORAN_VIDMODE_SECAM;
-			else
-				bstat->norm = ZORAN_VIDMODE_PAL;
-
-			bstat->color =
-			    (status & V4L2_IN_ST_NO_COLOR) ? 0 : 1;
-		}
-
-		return res;
-	}
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int zoran_vidiocgmbuf(struct file *file, void *__fh, struct video_mbuf *vmbuf)
-{
-	struct zoran_fh *fh = __fh;
-	struct zoran *zr = fh->zr;
-	int i, res = 0;
-
-
-	mutex_lock(&zr->resource_lock);
-
-	if (fh->buffers.allocated) {
-		dprintk(1,
-			KERN_ERR
-			"%s: VIDIOCGMBUF - buffers already allocated\n",
-			ZR_DEVNAME(zr));
-		res = -EINVAL;
-		goto v4l1reqbuf_unlock_and_return;
-	}
-
-	/* The next mmap will map the V4L buffers */
-	map_mode_raw(fh);
-
-	if (v4l_fbuffer_alloc(fh)) {
-		res = -ENOMEM;
-		goto v4l1reqbuf_unlock_and_return;
-	}
-
-	vmbuf->size = fh->buffers.num_buffers * fh->buffers.buffer_size;
-	vmbuf->frames = fh->buffers.num_buffers;
-	for (i = 0; i < vmbuf->frames; i++)
-		vmbuf->offsets[i] = i * fh->buffers.buffer_size;
-
-v4l1reqbuf_unlock_and_return:
-	mutex_unlock(&zr->resource_lock);
-
-	return res;
-}
-#endif
-
 static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability *cap)
 {
 	struct zoran_fh *fh = __fh;
@@ -3364,10 +3047,6 @@ static const struct v4l2_ioctl_ops zoran_ioctl_ops = {
 	.vidioc_queryctrl 		    = zoran_queryctrl,
 	.vidioc_s_ctrl       		    = zoran_s_ctrl,
 	.vidioc_g_ctrl       		    = zoran_g_ctrl,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidioc_default 		    = zoran_default,
-	.vidiocgmbuf 			    = zoran_vidiocgmbuf,
-#endif
 };
 
 /* please use zr->resource_lock consistently and kill this wrapper */
-- 
cgit v1.2.3


From 41d9931c5ae014fbab8bf612c70b8e7ff16f4641 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 07:04:16 -0300
Subject: [media] videobuf-dma-sg: remove obsolete comments

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/videobuf-dma-sg.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 9d520601c70f..ddb8f4b46c03 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -543,14 +543,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 
 	retval = -EINVAL;
 
-	/* This function maintains backwards compatibility with V4L1 and will
-	 * map more than one buffer if the vma length is equal to the combined
-	 * size of multiple buffers than it will map them together.  See
-	 * VIDIOCGMBUF in the v4l spec
-	 *
-	 * TODO: Allow drivers to specify if they support this mode
-	 */
-
 	BUG_ON(!mem);
 	MAGIC_CHECK(mem->magic, MAGIC_SG_MEM);
 
-- 
cgit v1.2.3


From 5772dcaa790851ec068afcd0d1f160d801b1126e Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 07:20:34 -0300
Subject: [media] usbvideo: remove deprecated drivers

Remove ibmcam, konicawc and ultracam drivers. There are replaced by
gspca drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/usbvideo/Kconfig    |   33 -
 drivers/media/video/usbvideo/Makefile   |    2 -
 drivers/media/video/usbvideo/ibmcam.c   | 3977 -------------------------------
 drivers/media/video/usbvideo/konicawc.c |  992 --------
 drivers/media/video/usbvideo/ultracam.c |  685 ------
 5 files changed, 5689 deletions(-)
 delete mode 100644 drivers/media/video/usbvideo/ibmcam.c
 delete mode 100644 drivers/media/video/usbvideo/konicawc.c
 delete mode 100644 drivers/media/video/usbvideo/ultracam.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index dfa7fc68a657..357860d42a8b 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -10,36 +10,3 @@ config USB_VICAM
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called vicam.
-
-config USB_IBMCAM
-	tristate "USB IBM (Xirlink) C-it Camera support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED please use the gspca xirlink_cit module
-	  instead.
-
-	  Say Y here if you want to connect a IBM "C-It" camera, also known as
-	  "Xirlink PC Camera" to your computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ibmcam.
-
-	  This camera has several configuration options which
-	  can be specified when you load the module. Read
-	  <file:Documentation/video4linux/ibmcam.txt> to learn more.
-
-config USB_KONICAWC
-	tristate "USB Konica Webcam support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED (and known to crash) please use the
-	  gspca konica module instead.
-
-	  Say Y here if you want support for webcams based on a Konica
-	  chipset. This is known to work with the Intel YC76 webcam.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called konicawc.
-
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
index bb52eb8dc2f9..3c99a9a2d8d3 100644
--- a/drivers/media/video/usbvideo/Makefile
+++ b/drivers/media/video/usbvideo/Makefile
@@ -1,4 +1,2 @@
 obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
-obj-$(CONFIG_USB_IBMCAM)        += ibmcam.o ultracam.o
-obj-$(CONFIG_USB_KONICAWC)      += konicawc.o
 obj-$(CONFIG_USB_VICAM)         += vicam.o
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
deleted file mode 100644
index b08549661781..000000000000
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ /dev/null
@@ -1,3977 +0,0 @@
-/*
- * USB IBM C-It Video Camera driver
- *
- * Supports Xirlink C-It Video Camera, IBM PC Camera,
- * IBM NetCamera and Veo Stingray.
- *
- * This driver is based on earlier work of:
- *
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- *
- * 5/24/00 Removed optional (and unnecessary) locking of the driver while
- * the device remains plugged in. Corrected race conditions in ibmcam_open
- * and ibmcam_probe() routines using this as a guideline:
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "usbvideo.h"
-
-#define IBMCAM_VENDOR_ID	0x0545
-#define IBMCAM_PRODUCT_ID	0x8080
-#define NETCAM_PRODUCT_ID	0x8002	/* IBM NetCamera, close to model 2 */
-#define VEO_800C_PRODUCT_ID	0x800C	/* Veo Stingray, repackaged Model 2 */
-#define VEO_800D_PRODUCT_ID	0x800D	/* Veo Stingray, repackaged Model 4 */
-
-#define MAX_IBMCAM		4	/* How many devices we allow to connect */
-#define USES_IBMCAM_PUTPIXEL    0       /* 0=Fast/oops 1=Slow/secure */
-
-/* Header signatures */
-
-/* Model 1 header: 00 FF 00 xx */
-#define HDRSIG_MODEL1_128x96	0x06	/* U Y V Y ... */
-#define HDRSIG_MODEL1_176x144	0x0e	/* U Y V Y ... */
-#define HDRSIG_MODEL1_352x288	0x00	/* V Y U Y ... */
-
-#define	IBMCAM_MODEL_1	1	/* XVP-501, 3 interfaces, rev. 0.02 */
-#define IBMCAM_MODEL_2	2	/* KSX-X9903, 2 interfaces, rev. 3.0a */
-#define IBMCAM_MODEL_3	3	/* KSX-X9902, 2 interfaces, rev. 3.01 */
-#define	IBMCAM_MODEL_4	4	/* IBM NetCamera, 0545/8002/3.0a */
-
-/* Video sizes supported */
-#define	VIDEOSIZE_128x96	VIDEOSIZE(128, 96)
-#define	VIDEOSIZE_176x144	VIDEOSIZE(176,144)
-#define	VIDEOSIZE_352x288	VIDEOSIZE(352,288)
-#define	VIDEOSIZE_320x240	VIDEOSIZE(320,240)
-#define	VIDEOSIZE_352x240	VIDEOSIZE(352,240)
-#define	VIDEOSIZE_640x480	VIDEOSIZE(640,480)
-#define	VIDEOSIZE_160x120	VIDEOSIZE(160,120)
-
-/* Video sizes supported */
-enum {
-	SIZE_128x96 = 0,
-	SIZE_160x120,
-	SIZE_176x144,
-	SIZE_320x240,
-	SIZE_352x240,
-	SIZE_352x288,
-	SIZE_640x480,
-	/* Add/remove/rearrange items before this line */
-	SIZE_LastItem
-};
-
-/*
- * This structure lives in uvd->user field.
- */
-typedef struct {
-	int initialized;	/* Had we already sent init sequence? */
-	int camera_model;	/* What type of IBM camera we got? */
-	int has_hdr;
-} ibmcam_t;
-#define	IBMCAM_T(uvd)	((ibmcam_t *)((uvd)->user_data))
-
-static struct usbvideo *cams;
-
-static int debug;
-
-static int flags; /* = FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
-
-static const int min_canvasWidth  = 8;
-static const int min_canvasHeight = 4;
-
-static int lighting = 1; /* Medium */
-
-#define SHARPNESS_MIN	0
-#define SHARPNESS_MAX	6
-static int sharpness = 4; /* Low noise, good details */
-
-#define FRAMERATE_MIN	0
-#define FRAMERATE_MAX	6
-static int framerate = -1;
-
-static int size = SIZE_352x288;
-
-/*
- * Here we define several initialization variables. They may
- * be used to automatically set color, hue, brightness and
- * contrast to desired values. This is particularly useful in
- * case of webcams (which have no controls and no on-screen
- * output) and also when a client V4L software is used that
- * does not have some of those controls. In any case it's
- * good to have startup values as options.
- *
- * These values are all in [0..255] range. This simplifies
- * operation. Note that actual values of V4L variables may
- * be scaled up (as much as << 8). User can see that only
- * on overlay output, however, or through a V4L client.
- */
-static int init_brightness = 128;
-static int init_contrast = 192;
-static int init_color = 128;
-static int init_hue = 128;
-static int hue_correction = 128;
-
-/* Settings for camera model 2 */
-static int init_model2_rg2 = -1;
-static int init_model2_sat = -1;
-static int init_model2_yb = -1;
-
-/* 01.01.08 - Added for RCA video in support -LO */
-/* Settings for camera model 3 */
-static int init_model3_input;
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-module_param(flags, int, 0);
-MODULE_PARM_DESC(flags, "Bitfield: 0=VIDIOCSYNC, 1=B/W, 2=show hints, 3=show stats, 4=test pattern, 5=separate frames, 6=clean frames");
-module_param(framerate, int, 0);
-MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
-module_param(lighting, int, 0);
-MODULE_PARM_DESC(lighting, "Photosensitivity: 0=bright, 1=medium (default), 2=low light");
-module_param(sharpness, int, 0);
-MODULE_PARM_DESC(sharpness, "Model1 noise reduction: 0=smooth, 6=sharp (default=4)");
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Image size: 0=128x96 1=160x120 2=176x144 3=320x240 4=352x240 5=352x288 6=640x480  (default=5)");
-module_param(init_brightness, int, 0);
-MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
-module_param(init_contrast, int, 0);
-MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
-module_param(init_color, int, 0);
-MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
-module_param(init_hue, int, 0);
-MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
-module_param(hue_correction, int, 0);
-MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
-
-module_param(init_model2_rg2, int, 0);
-MODULE_PARM_DESC(init_model2_rg2, "Model2 preconfiguration: 0-255 (default=47)");
-module_param(init_model2_sat, int, 0);
-MODULE_PARM_DESC(init_model2_sat, "Model2 preconfiguration: 0-255 (default=52)");
-module_param(init_model2_yb, int, 0);
-MODULE_PARM_DESC(init_model2_yb, "Model2 preconfiguration: 0-255 (default=160)");
-
-/* 01.01.08 - Added for RCA video in support -LO */
-module_param(init_model3_input, int, 0);
-MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA");
-
-MODULE_AUTHOR ("Dmitri");
-MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000");
-MODULE_LICENSE("GPL");
-
-/* Still mysterious i2c commands */
-static const unsigned short unknown_88 = 0x0088;
-static const unsigned short unknown_89 = 0x0089;
-static const unsigned short bright_3x[3] = { 0x0031, 0x0032, 0x0033 };
-static const unsigned short contrast_14 = 0x0014;
-static const unsigned short light_27 = 0x0027;
-static const unsigned short sharp_13 = 0x0013;
-
-/* i2c commands for Model 2 cameras */
-static const unsigned short mod2_brightness = 0x001a;		/* $5b .. $ee; default=$5a */
-static const unsigned short mod2_set_framerate = 0x001c;	/* 0 (fast).. $1F (slow) */
-static const unsigned short mod2_color_balance_rg2 = 0x001e;	/* 0 (red) .. $7F (green) */
-static const unsigned short mod2_saturation = 0x0020;		/* 0 (b/w) - $7F (full color) */
-static const unsigned short mod2_color_balance_yb = 0x0022;	/* 0..$7F, $50 is about right */
-static const unsigned short mod2_hue = 0x0024;			/* 0..$7F, $70 is about right */
-static const unsigned short mod2_sensitivity = 0x0028;		/* 0 (min) .. $1F (max) */
-
-struct struct_initData {
-	unsigned char req;
-	unsigned short value;
-	unsigned short index;
-};
-
-/*
- * ibmcam_size_to_videosize()
- *
- * This procedure converts module option 'size' into the actual
- * videosize_t that defines the image size in pixels. We need
- * simplified 'size' because user wants a simple enumerated list
- * of choices, not an infinite set of possibilities.
- */
-static videosize_t ibmcam_size_to_videosize(int size)
-{
-	videosize_t vs = VIDEOSIZE_352x288;
-	RESTRICT_TO_RANGE(size, 0, (SIZE_LastItem-1));
-	switch (size) {
-	case SIZE_128x96:
-		vs = VIDEOSIZE_128x96;
-		break;
-	case SIZE_160x120:
-		vs = VIDEOSIZE_160x120;
-		break;
-	case SIZE_176x144:
-		vs = VIDEOSIZE_176x144;
-		break;
-	case SIZE_320x240:
-		vs = VIDEOSIZE_320x240;
-		break;
-	case SIZE_352x240:
-		vs = VIDEOSIZE_352x240;
-		break;
-	case SIZE_352x288:
-		vs = VIDEOSIZE_352x288;
-		break;
-	case SIZE_640x480:
-		vs = VIDEOSIZE_640x480;
-		break;
-	default:
-		err("size=%d. is not valid", size);
-		break;
-	}
-	return vs;
-}
-
-/*
- * ibmcam_find_header()
- *
- * Locate one of supported header markers in the queue.
- * Once found, remove all preceding bytes AND the marker (4 bytes)
- * from the data pump queue. Whatever follows must be video lines.
- *
- * History:
- * 1/21/00  Created.
- */
-static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
-{
-	struct usbvideo_frame *frame;
-	ibmcam_t *icam;
-
-	if ((uvd->curframe) < 0 || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
-		err("ibmcam_find_header: Illegal frame %d.", uvd->curframe);
-		return scan_EndParse;
-	}
-	icam = IBMCAM_T(uvd);
-	assert(icam != NULL);
-	frame = &uvd->frame[uvd->curframe];
-	icam->has_hdr = 0;
-	switch (icam->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int marker_len = 4;
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00))
-			{
-#if 0				/* This code helps to detect new frame markers */
-				dev_info(&uvd->dev->dev,
-					 "Header sig: 00 FF 00 %02X\n",
-					 RING_QUEUE_PEEK(&uvd->dp, 3));
-#endif
-				frame->header = RING_QUEUE_PEEK(&uvd->dp, 3);
-				if ((frame->header == HDRSIG_MODEL1_128x96) ||
-				    (frame->header == HDRSIG_MODEL1_176x144) ||
-				    (frame->header == HDRSIG_MODEL1_352x288))
-				{
-#if 0
-					dev_info(&uvd->dev->dev,
-						 "Header found.\n");
-#endif
-					RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-					icam->has_hdr = 1;
-					break;
-				}
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-case IBMCAM_MODEL_4:
-	{
-		int marker_len = 0;
-		switch (uvd->videosize) {
-		case VIDEOSIZE_176x144:
-			marker_len = 10;
-			break;
-		default:
-			marker_len = 2;
-			break;
-		}
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF))
-			{
-#if 0
-				dev_info(&uvd->dev->dev, "Header found.\n");
-#endif
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-				icam->has_hdr = 1;
-				frame->header = HDRSIG_MODEL1_176x144;
-				break;
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{	/*
-		 * Headers: (one precedes every frame). nc=no compression,
-		 * bq=best quality bf=best frame rate.
-		 *
-		 * 176x144: 00 FF 02 { 0A=nc CA=bq EA=bf }
-		 * 320x240: 00 FF 02 { 08=nc 28=bq 68=bf }
-		 * 640x480: 00 FF 03 { 08=nc 28=bq 68=bf }
-		 *
-		 * Bytes '00 FF' seem to indicate header. Other two bytes
-		 * encode the frame type. This is a set of bit fields that
-		 * encode image size, compression type etc. These fields
-		 * do NOT contain frame number because all frames carry
-		 * the same header.
-		 */
-		const int marker_len = 4;
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) != 0xFF))
-			{
-				/*
-				 * Combine 2 bytes of frame type into one
-				 * easy to use value
-				 */
-				unsigned long byte3, byte4;
-
-				byte3 = RING_QUEUE_PEEK(&uvd->dp, 2);
-				byte4 = RING_QUEUE_PEEK(&uvd->dp, 3);
-				frame->header = (byte3 << 8) | byte4;
-#if 0
-				dev_info(&uvd->dev->dev, "Header found.\n");
-#endif
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-				icam->has_hdr = 1;
-				break;
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	default:
-		break;
-	}
-	if (!icam->has_hdr) {
-		if (uvd->debug > 2)
-			dev_info(&uvd->dev->dev,
-				 "Skipping frame, no header\n");
-		return scan_EndParse;
-	}
-
-	/* Header found */
-	icam->has_hdr = 1;
-	uvd->stats.header_count++;
-	frame->scanstate = ScanState_Lines;
-	frame->curline = 0;
-
-	if (flags & FLAGS_FORCE_TESTPATTERN) {
-		usbvideo_TestPattern(uvd, 1, 1);
-		return scan_NextFrame;
-	}
-	return scan_Continue;
-}
-
-/*
- * ibmcam_parse_lines()
- *
- * Parse one line (interlaced) from the buffer, put
- * decoded RGB value into the current frame buffer
- * and add the written number of bytes (RGB) to
- * the *pcopylen.
- *
- * History:
- * 21-Jan-2000 Created.
- * 12-Oct-2000 Reworked to reflect interlaced nature of the data.
- */
-static enum ParseState ibmcam_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *f;
-	ibmcam_t *icam;
-	unsigned int len, scanLength, scanHeight, order_uv, order_yc;
-	int v4l_linesize; /* V4L line offset */
-	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
-	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
-	const int ccm = 128; /* Color correction median - see below */
-	int y, u, v, i, frame_done=0, color_corr;
-	static unsigned char lineBuffer[640*3];
-	unsigned const char *chromaLine, *lumaLine;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-	icam = IBMCAM_T(uvd);
-	assert(icam != NULL);
-	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	if (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_4) {
-		/* Model 4 frame markers do not carry image size identification */
-		switch (uvd->videosize) {
-		case VIDEOSIZE_128x96:
-		case VIDEOSIZE_160x120:
-		case VIDEOSIZE_176x144:
-			scanLength = VIDEOSIZE_X(uvd->videosize);
-			scanHeight = VIDEOSIZE_Y(uvd->videosize);
-			break;
-		default:
-			err("ibmcam_parse_lines: Wrong mode.");
-			return scan_Out;
-		}
-		order_yc = 1;	/* order_yc: true=Yc false=cY ('c'=either U or V) */
-		order_uv = 1;	/* Always true in this algorithm */
-	} else {
-		switch (frame->header) {
-		case HDRSIG_MODEL1_128x96:
-			scanLength = 128;
-			scanHeight = 96;
-			order_uv = 1;	/* U Y V Y ... */
-			break;
-		case HDRSIG_MODEL1_176x144:
-			scanLength = 176;
-			scanHeight = 144;
-			order_uv = 1;	/* U Y V Y ... */
-			break;
-		case HDRSIG_MODEL1_352x288:
-			scanLength = 352;
-			scanHeight = 288;
-			order_uv = 0;	/* Y V Y V ... */
-			break;
-		default:
-			err("Unknown header signature 00 FF 00 %02lX", frame->header);
-			return scan_NextFrame;
-		}
-		/* order_yc: true=Yc false=cY ('c'=either U or V) */
-		order_yc = (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_2);
-	}
-
-	len = scanLength * 3;
-	assert(len <= sizeof(lineBuffer));
-
-	/*
-	 * Lines are organized this way:
-	 *
-	 * I420:
-	 * ~~~~
-	 * <scanLength->
-	 * ___________________________________
-	 * |-----Y-----|---UVUVUV...UVUV-----| \
-	 * |-----------+---------------------|  \
-	 * |<-- 176 -->|<------ 176*2 ------>|  Total 72. lines (interlaced)
-	 * |...	   ... |        ...          |  /
-	 * |<-- 352 -->|<------ 352*2 ------>|  Total 144. lines (interlaced)
-	 * |___________|_____________________| /
-	 *  \           \
-	 *   lumaLine    chromaLine
-	 */
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Mind that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
-		return scan_NextFrame;
-
-	/*
-	 * Now we are sure that entire line (representing all 'scanLength'
-	 * pixels from the camera) is available in the buffer. We
-	 * start copying the line left-aligned to the V4L buffer.
-	 * If the camera line is shorter then we should pad the V4L
-	 * buffer with something (black) to complete the line.
-	 */
-	assert(frame->data != NULL);
-	f = frame->data + (v4l_linesize * frame->curline);
-
-	/*
-	 * To obtain chrominance data from the 'chromaLine' use this:
-	 *   v = chromaLine[0]; // 0-1:[0], 2-3:[4], 4-5:[8]...
-	 *   u = chromaLine[2]; // 0-1:[2], 2-3:[6], 4-5:[10]...
-	 *
-	 * Indices must be calculated this way:
-	 * v_index = (i >> 1) << 2;
-	 * u_index = (i >> 1) << 2 + 2;
-	 *
-	 * where 'i' is the column number [0..VIDEOSIZE_X(frame->request)-1]
-	 */
-	lumaLine = lineBuffer;
-	chromaLine = lineBuffer + scanLength;
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++)
-	{
-		unsigned char rv, gv, bv;	/* RGB components */
-
-		/* Check for various visual debugging hints (colorized pixels) */
-		if ((flags & FLAGS_DISPLAY_HINTS) && (icam->has_hdr)) {
-			/*
-			 * This is bad and should not happen. This means that
-			 * we somehow overshoot the line and encountered new
-			 * frame! Obviously our camera/V4L frame size is out
-			 * of whack. This cyan dot will help you to figure
-			 * out where exactly the new frame arrived.
-			 */
-			if (icam->has_hdr == 1) {
-				bv = 0; /* Yellow marker */
-				gv = 0xFF;
-				rv = 0xFF;
-			} else {
-				bv = 0xFF; /* Cyan marker */
-				gv = 0xFF;
-				rv = 0;
-			}
-			icam->has_hdr = 0;
-			goto make_pixel;
-		}
-
-		/*
-		 * Check if we are still in range. We may be out of range if our
-		 * V4L canvas is wider or taller than the camera "native" image.
-		 * Then we quickly fill the remainder of the line with zeros to
-		 * make black color and quit the horizontal scanning loop.
-		 */
-		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int j = i * V4L_BYTES_PER_PIXEL;
-#if USES_IBMCAM_PUTPIXEL
-			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + j;
-#endif
-			memset(f, 0, v4l_linesize - j);
-			break;
-		}
-
-		y = lumaLine[i];
-		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
-			rv = gv = bv = y;
-		else {
-			int off_0, off_2;
-
-			off_0 = (i >> 1) << 2;
-			off_2 = off_0 + 2;
-
-			if (order_yc) {
-				off_0++;
-				off_2++;
-			}
-			if (!order_uv) {
-				off_0 += 2;
-				off_2 -= 2;
-			}
-			u = chromaLine[off_0] + hue_corr;
-			v = chromaLine[off_2] + hue2_corr;
-
-			/* Apply color correction */
-			if (color_corr != 0) {
-				/* Magnify up to 2 times, reduce down to zero saturation */
-				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
-				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
-			}
-			YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
-		}
-
-	make_pixel:
-		/*
-		 * The purpose of creating the pixel here, in one,
-		 * dedicated place is that we may need to make the
-		 * pixel wider and taller than it actually is. This
-		 * may be used if camera generates small frames for
-		 * sake of frame rate (or any other reason.)
-		 *
-		 * The output data consists of B, G, R bytes
-		 * (in this order).
-		 */
-#if USES_IBMCAM_PUTPIXEL
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-#else
-		*f++ = bv;
-		*f++ = gv;
-		*f++ = rv;
-#endif
-		/*
-		 * Typically we do not decide within a legitimate frame
-		 * that we want to end the frame. However debugging code
-		 * may detect marker of new frame within the data. Then
-		 * this condition activates. The 'data' pointer is already
-		 * pointing at the new marker, so we'd better leave it as is.
-		 */
-		if (frame_done)
-			break;	/* End scanning of lines */
-	}
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	if (pcopylen != NULL)
-		*pcopylen += 2 * v4l_linesize;
-	frame->deinterlace = Deinterlace_FillOddLines;
-
-	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
-		return scan_NextFrame;
-	else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model2_320x240_parse_lines()
- *
- * This procedure deals with a weird RGB format that is produced by IBM
- * camera model 2 in modes 320x240 and above; 'x' below is 159 or 175,
- * depending on horizontal size of the picture:
- *
- * <--- 160 or 176 pairs of RA,RB bytes ----->
- * *-----------------------------------------* \
- * | RA0 | RB0 | RA1 | RB1 | ... | RAx | RBx |  \   This is pair of horizontal lines,
- * |-----+-----+-----+-----+ ... +-----+-----|   *- or one interlaced line, total
- * | B0  | G0  | B1  | G1  | ... | Bx  | Gx  |  /   120 or 144 such pairs which yield
- * |=====+=====+=====+=====+ ... +=====+=====| /    240 or 288 lines after deinterlacing.
- *
- * Each group of FOUR bytes (RAi, RBi, Bi, Gi) where i=0..frame_width/2-1
- * defines ONE pixel. Therefore this format yields 176x144 "decoded"
- * resolution at best. I do not know why camera sends such format - the
- * previous model (1) just used interlaced I420 and everyone was happy.
- *
- * I do not know what is the difference between RAi and RBi bytes. Both
- * seemingly represent R component, but slightly vary in value (so that
- * the picture looks a bit colored if one or another is used). I use
- * them both as R component in attempt to at least partially recover the
- * lost resolution.
- */
-static enum ParseState ibmcam_model2_320x240_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *f, *la, *lb;
-	unsigned int len;
-	int v4l_linesize; /* V4L line offset */
-	int i, j, frame_done=0, color_corr;
-	int scanLength, scanHeight;
-	static unsigned char lineBuffer[352*2];
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_320x240:
-	case VIDEOSIZE_352x240:
-	case VIDEOSIZE_352x288:
-		scanLength = VIDEOSIZE_X(uvd->videosize);
-		scanHeight = VIDEOSIZE_Y(uvd->videosize);
-		break;
-	default:
-		err("ibmcam_model2_320x240_parse_lines: Wrong mode.");
-		return scan_Out;
-	}
-
-	color_corr = (uvd->vpic.colour) >> 8; /* 0..+255 */
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	len = scanLength * 2; /* See explanation above */
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Mind that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
-		return scan_NextFrame;
-
-	la = lineBuffer;
-	lb = lineBuffer + scanLength;
-
-	/*
-	 * Now we are sure that entire line (representing all
-	 *         VIDEOSIZE_X(frame->request)
-	 * pixels from the camera) is available in the scratch buffer. We
-	 * start copying the line left-aligned to the V4L buffer (which
-	 * might be larger - not smaller, hopefully). If the camera
-	 * line is shorter then we should pad the V4L buffer with something
-	 * (black in this case) to complete the line.
-	 */
-	f = frame->data + (v4l_linesize * frame->curline);
-
-	/* Fill the 2-line strip */
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-		int y, rv, gv, bv;	/* RGB components */
-
-		j = i & (~1);
-
-		/* Check for various visual debugging hints (colorized pixels) */
-		if ((flags & FLAGS_DISPLAY_HINTS) && (IBMCAM_T(uvd)->has_hdr)) {
-			if (IBMCAM_T(uvd)->has_hdr == 1) {
-				bv = 0; /* Yellow marker */
-				gv = 0xFF;
-				rv = 0xFF;
-			} else {
-				bv = 0xFF; /* Cyan marker */
-				gv = 0xFF;
-				rv = 0;
-			}
-			IBMCAM_T(uvd)->has_hdr = 0;
-			goto make_pixel;
-		}
-
-		/*
-		 * Check if we are still in range. We may be out of range if our
-		 * V4L canvas is wider or taller than the camera "native" image.
-		 * Then we quickly fill the remainder of the line with zeros to
-		 * make black color and quit the horizontal scanning loop.
-		 */
-		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int offset = i * V4L_BYTES_PER_PIXEL;
-#if USES_IBMCAM_PUTPIXEL
-			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + offset;
-#endif
-			memset(f, 0, v4l_linesize - offset);
-			break;
-		}
-
-		/*
-		 * Here I use RA and RB components, one per physical pixel.
-		 * This causes fine vertical grid on the picture but may improve
-		 * horizontal resolution. If you prefer replicating, use this:
-		 *   rv = la[j + 0];   ... or ... rv = la[j + 1];
-		 * then the pixel will be replicated.
-		 */
-		rv = la[i];
-		gv = lb[j + 1];
-		bv = lb[j + 0];
-
-		y = (rv + gv + bv) / 3; /* Brightness (badly calculated) */
-
-		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
-			rv = gv = bv = y;
-		else if (color_corr != 128) {
-
-			/* Calculate difference between color and brightness */
-			rv -= y;
-			gv -= y;
-			bv -= y;
-
-			/* Scale differences */
-			rv = (rv * color_corr) / 128;
-			gv = (gv * color_corr) / 128;
-			bv = (bv * color_corr) / 128;
-
-			/* Reapply brightness */
-			rv += y;
-			gv += y;
-			bv += y;
-
-			/* Watch for overflows */
-			RESTRICT_TO_RANGE(rv, 0, 255);
-			RESTRICT_TO_RANGE(gv, 0, 255);
-			RESTRICT_TO_RANGE(bv, 0, 255);
-		}
-
-	make_pixel:
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-	}
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	*pcopylen += v4l_linesize * 2;
-	frame->deinterlace = Deinterlace_FillOddLines;
-
-	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
-		return scan_NextFrame;
-	else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model3_parse_lines()
- *
- * | Even lines |     Odd Lines       |
- * -----------------------------------|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |............|.....................|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |------------+---------------------|
- *
- * There is one (U, V) chroma pair for every four luma (Y) values.  This
- * function reads a pair of lines at a time and obtains missing chroma values
- * from adjacent pixels.
- */
-static enum ParseState ibmcam_model3_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *data;
-	const unsigned char *color;
-	unsigned int len;
-	int v4l_linesize; /* V4L line offset */
-	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
-	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
-	const int ccm = 128; /* Color correction median - see below */
-	int i, u, v, rw, data_w=0, data_h=0, color_corr;
-	static unsigned char lineBuffer[640*3];
-	int line;
-
-	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	/* The header tells us what sort of data is in this frame */
-	switch (frame->header) {
-		/*
-		 * Uncompressed modes (that are easy to decode).
-		 */
-	case 0x0308:
-		data_w = 640;
-		data_h = 480;
-		break;
-	case 0x0208:
-		data_w = 320;
-		data_h = 240;
-		break;
-	case 0x020A:
-		data_w = 160;
-		data_h = 120;
-		break;
-		/*
-		 * Compressed modes (ViCE - that I don't know how to decode).
-		 */
-	case 0x0328:	/* 640x480, best quality compression */
-	case 0x0368:	/* 640x480, best frame rate compression */
-	case 0x0228:	/* 320x240, best quality compression */
-	case 0x0268:	/* 320x240, best frame rate compression */
-	case 0x02CA:	/* 160x120, best quality compression */
-	case 0x02EA:	/* 160x120, best frame rate compression */
-		/* Do nothing with this - not supported */
-		err("Unsupported mode $%04lx", frame->header);
-		return scan_NextFrame;
-	default:
-		/* Catch unknown headers, may help in learning new headers */
-		err("Strange frame->header=$%08lx", frame->header);
-		return scan_NextFrame;
-	}
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Note that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 1) >= data_h) {
-		if (uvd->debug >= 3)
-			dev_info(&uvd->dev->dev,
-				 "Reached line %d. (frame is done)\n",
-				 frame->curline);
-		return scan_NextFrame;
-	}
-
-	/* Make sure that lineBuffer can store two lines of data */
-	len = 3 * data_w; /* <y-data> <uyvy-data> */
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for two lines */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck two lines of data out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	data = lineBuffer;
-	color = data + data_w;		/* Point to where color planes begin */
-
-	/* Bottom-to-top scanning */
-	rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1;
-	RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1);
-
-	/* Iterate over two lines. */
-	for (line = 0; line < 2; line++) {
-		for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-			int y;
-			int rv, gv, bv;	/* RGB components */
-
-			if (i >= data_w) {
-				RGB24_PUTPIXEL(frame, i, rw, 0, 0, 0);
-				continue;
-			}
-
-			/* first line is YYY...Y; second is UYVY...UYVY */
-			y = data[(line == 0) ? i : (i*2 + 1)];
-
-			/* Apply static color correction */
-			u = color[(i/2)*4] + hue_corr;
-			v = color[(i/2)*4 + 2] + hue2_corr;
-
-			/* Apply color correction */
-			if (color_corr != 0) {
-				/* Magnify up to 2 times, reduce down to zero saturation */
-				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
-				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
-			}
-
-
-			YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
-			RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv);  /* No deinterlacing */
-		}
-
-		/* Check for the end of requested data */
-		if (rw == 0)
-			break;
-
-		/* Prepare for the second line */
-		rw--;
-		data = lineBuffer + data_w;
-	}
-	frame->deinterlace = Deinterlace_None;
-
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	*pcopylen += 2 * v4l_linesize;
-
-	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
-		if (uvd->debug >= 3) {
-			dev_info(&uvd->dev->dev,
-				 "All requested lines (%ld.) done.\n",
-				 VIDEOSIZE_Y(frame->request));
-		}
-		return scan_NextFrame;
-	} else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model4_128x96_parse_lines()
- *
- * This decoder is for one strange data format that is produced by Model 4
- * camera only in 128x96 mode. This is RGB format and here is its description.
- * First of all, this is non-interlaced stream, meaning that all scan lines
- * are present in the datastream. There are 96 consecutive blocks of data
- * that describe all 96 lines of the image. Each block is 5*128 bytes long
- * and carries R, G, B components. The format of the block is shown in the
- * code below. First 128*2 bytes are interleaved R and G components. Then
- * we have a gap (junk data) 64 bytes long. Then follow B and something
- * else, also interleaved (this makes another 128*2 bytes). After that
- * probably another 64 bytes of junk follow.
- *
- * History:
- * 10-Feb-2001 Created.
- */
-static enum ParseState ibmcam_model4_128x96_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	const unsigned char *data_rv, *data_gv, *data_bv;
-	unsigned int len;
-	int i, v4l_linesize; /* V4L line offset */
-	const int data_w=128, data_h=96;
-	static unsigned char lineBuffer[128*5];
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Note that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 1) >= data_h) {
-		if (uvd->debug >= 3)
-			dev_info(&uvd->dev->dev,
-				 "Reached line %d. (frame is done)\n",
-				 frame->curline);
-		return scan_NextFrame;
-	}
-
-	/*
-	 * RGRGRG .... RGRG_____________B?B?B? ... B?B?____________
-	 * <---- 128*2 ---><---- 64 ---><--- 128*2 ---><--- 64 --->
-	 */
-
-	/* Make sure there's enough data for the entire line */
-	len = 5 * data_w;
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	data_rv = lineBuffer;
-	data_gv = lineBuffer + 1;
-	data_bv = lineBuffer + data_w*2 + data_w/2;
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-		int rv, gv, bv;	/* RGB components */
-		if (i < data_w) {
-			const int j = i * 2;
-			gv = data_rv[j];
-			rv = data_gv[j];
-			bv = data_bv[j];
-			if (flags & FLAGS_MONOCHROME) {
-				unsigned long y;
-				y = rv + gv + bv;
-				y /= 3;
-				if (y > 0xFF)
-					y = 0xFF;
-				rv = gv = bv = (unsigned char) y;
-			}
-		} else {
-			rv = gv = bv = 0;
-		}
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-	}
-	frame->deinterlace = Deinterlace_None;
-	frame->curline++;
-	*pcopylen += v4l_linesize;
-
-	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
-		if (uvd->debug >= 3) {
-			dev_info(&uvd->dev->dev,
-				 "All requested lines (%ld.) done.\n",
-				 VIDEOSIZE_Y(frame->request));
-		}
-		return scan_NextFrame;
-	} else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_ProcessIsocData()
- *
- * Generic routine to parse the ring queue data. It employs either
- * ibmcam_find_header() or ibmcam_parse_lines() to do most
- * of work.
- *
- * History:
- * 1/21/00  Created.
- */
-static void ibmcam_ProcessIsocData(struct uvd *uvd,
-				   struct usbvideo_frame *frame)
-{
-	enum ParseState newstate;
-	long copylen = 0;
-	int mod = IBMCAM_T(uvd)->camera_model;
-
-	while (1) {
-		newstate = scan_Out;
-		if (RingQueue_GetLength(&uvd->dp) > 0) {
-			if (frame->scanstate == ScanState_Scanning) {
-				newstate = ibmcam_find_header(uvd);
-			} else if (frame->scanstate == ScanState_Lines) {
-				if ((mod == IBMCAM_MODEL_2) &&
-				    ((uvd->videosize == VIDEOSIZE_352x288) ||
-				     (uvd->videosize == VIDEOSIZE_320x240) ||
-				     (uvd->videosize == VIDEOSIZE_352x240)))
-				{
-					newstate = ibmcam_model2_320x240_parse_lines(
-						uvd, frame, &copylen);
-				} else if (mod == IBMCAM_MODEL_4) {
-					/*
-					 * Model 4 cameras (IBM NetCamera) use Model 2 decoder (RGB)
-					 * for 320x240 and above; 160x120 and 176x144 uses Model 1
-					 * decoder (YUV), and 128x96 mode uses ???
-					 */
-					if ((uvd->videosize == VIDEOSIZE_352x288) ||
-					    (uvd->videosize == VIDEOSIZE_320x240) ||
-					    (uvd->videosize == VIDEOSIZE_352x240))
-					{
-						newstate = ibmcam_model2_320x240_parse_lines(uvd, frame, &copylen);
-					} else if (uvd->videosize == VIDEOSIZE_128x96) {
-						newstate = ibmcam_model4_128x96_parse_lines(uvd, frame, &copylen);
-					} else {
-						newstate = ibmcam_parse_lines(uvd, frame, &copylen);
-					}
-				} else if (mod == IBMCAM_MODEL_3) {
-					newstate = ibmcam_model3_parse_lines(uvd, frame, &copylen);
-				} else {
-					newstate = ibmcam_parse_lines(uvd, frame, &copylen);
-				}
-			}
-		}
-		if (newstate == scan_Continue)
-			continue;
-		else if ((newstate == scan_NextFrame) || (newstate == scan_Out))
-			break;
-		else
-			return; /* scan_EndParse */
-	}
-
-	if (newstate == scan_NextFrame) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-		if ((mod == IBMCAM_MODEL_2) || (mod == IBMCAM_MODEL_4)) {
-			/* Need software contrast adjustment for those cameras */
-			frame->flags |= USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST;
-		}
-	}
-
-	/* Update the frame's uncompressed length. */
-	frame->seqRead_Length += copylen;
-
-#if 0
-	{
-		static unsigned char j=0;
-		memset(frame->data, j++, uvd->max_frame_size);
-		frame->frameState = FrameState_Ready;
-	}
-#endif
-}
-
-/*
- * ibmcam_veio()
- *
- * History:
- * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
- */
-static int ibmcam_veio(
-	struct uvd *uvd,
-	unsigned char req,
-	unsigned short value,
-	unsigned short index)
-{
-	static const char proc[] = "ibmcam_veio";
-	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
-	int i;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return 0;
-
-	if (req == 1) {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_rcvctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
-			value,
-			index,
-			cp,
-			sizeof(cp),
-			1000);
-#if 0
-		dev_info(&uvd->dev->dev,
-			 "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
-			 "(req=$%02x val=$%04x ind=$%04x)\n",
-			 cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
-			 req, value, index);
-#endif
-	} else {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_sndctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
-			value,
-			index,
-			NULL,
-			0,
-			1000);
-	}
-	if (i < 0) {
-		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
-		    proc, i);
-		uvd->last_error = i;
-	}
-	return i;
-}
-
-/*
- * ibmcam_calculate_fps()
- *
- * This procedure roughly calculates the real frame rate based
- * on FPS code (framerate=NNN option). Actual FPS differs
- * slightly depending on lighting conditions, so that actual frame
- * rate is determined by the camera. Since I don't know how to ask
- * the camera what FPS is now I have to use the FPS code instead.
- *
- * The FPS code is in range [0..6], 0 is slowest, 6 is fastest.
- * Corresponding real FPS should be in range [3..30] frames per second.
- * The conversion formula is obvious:
- *
- * real_fps = 3 + (fps_code * 4.5)
- *
- * History:
- * 1/18/00  Created.
- */
-static int ibmcam_calculate_fps(struct uvd *uvd)
-{
-	return 3 + framerate*4 + framerate/2;
-}
-
-/*
- * ibmcam_send_FF_04_02()
- *
- * This procedure sends magic 3-command prefix to the camera.
- * The purpose of this prefix is not known.
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_send_FF_04_02(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x00FF, 0x0127);
-	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-}
-
-static void ibmcam_send_00_04_06(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0006, 0x0124);
-}
-
-static void ibmcam_send_x_00(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-}
-
-static void ibmcam_send_x_00_05(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_send_x_00(uvd, x);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-}
-
-static void ibmcam_send_x_01_00_05(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02_01(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02_08_01(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0008, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-}
-
-static void ibmcam_Packet_Format1(struct uvd *uvd, unsigned char fkey, unsigned char val)
-{
-	ibmcam_send_x_01_00_05(uvd, unknown_88);
-	ibmcam_send_x_00_05(uvd, fkey);
-	ibmcam_send_x_00_05_02_08_01(uvd, val);
-	ibmcam_send_x_00_05(uvd, unknown_88);
-	ibmcam_send_x_00_05_02_01(uvd, fkey);
-	ibmcam_send_x_00_05(uvd, unknown_89);
-	ibmcam_send_x_00(uvd, fkey);
-	ibmcam_send_00_04_06(uvd);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0126);
-	ibmcam_send_FF_04_02(uvd);
-}
-
-static void ibmcam_PacketFormat2(struct uvd *uvd, unsigned char fkey, unsigned char val)
-{
-	ibmcam_send_x_01_00_05	(uvd, unknown_88);
-	ibmcam_send_x_00_05	(uvd, fkey);
-	ibmcam_send_x_00_05_02	(uvd, val);
-}
-
-static void ibmcam_model2_Packet2(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x00ff, 0x012d);
-	ibmcam_veio(uvd, 0, 0xfea3, 0x0124);
-}
-
-static void ibmcam_model2_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
-{
-	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-	ibmcam_veio(uvd, 0, 0x00ff, 0x012e);
-	ibmcam_veio(uvd, 0, v1,     0x012f);
-	ibmcam_veio(uvd, 0, 0x00ff, 0x0130);
-	ibmcam_veio(uvd, 0, 0xc719, 0x0124);
-	ibmcam_veio(uvd, 0, v2,     0x0127);
-
-	ibmcam_model2_Packet2(uvd);
-}
-
-/*
- * ibmcam_model3_Packet1()
- *
- * 00_0078_012d
- * 00_0097_012f
- * 00_d141_0124
- * 00_0096_0127
- * 00_fea8_0124
-*/
-static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
-{
-	ibmcam_veio(uvd, 0, 0x0078, 0x012d);
-	ibmcam_veio(uvd, 0, v1,     0x012f);
-	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-	ibmcam_veio(uvd, 0, v2,     0x0127);
-	ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-}
-
-static void ibmcam_model4_BrightnessPacket(struct uvd *uvd, int i)
-{
-	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-	ibmcam_veio(uvd, 0, 0x0026, 0x012f);
-	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-	ibmcam_veio(uvd, 0, i,      0x0127);
-	ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-	ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0038, 0x012d);
-	ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-	ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-	ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-}
-
-/*
- * ibmcam_adjust_contrast()
- *
- * The contrast value changes from 0 (high contrast) to 15 (low contrast).
- * This is in reverse to usual order of things (such as TV controls), so
- * we reverse it again here.
- *
- * TODO: we probably don't need to send the setup 5 times...
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_adjust_contrast(struct uvd *uvd)
-{
-	unsigned char a_contrast = uvd->vpic.contrast >> 12;
-	unsigned char new_contrast;
-
-	if (a_contrast >= 16)
-		a_contrast = 15;
-	new_contrast = 15 - a_contrast;
-	if (new_contrast == uvd->vpic_old.contrast)
-		return;
-	uvd->vpic_old.contrast = new_contrast;
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int ntries = 5;
-		int i;
-		for (i=0; i < ntries; i++) {
-			ibmcam_Packet_Format1(uvd, contrast_14, new_contrast);
-			ibmcam_send_FF_04_02(uvd);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	case IBMCAM_MODEL_4:
-		/* Models 2, 4 do not have this control; implemented in software. */
-		break;
-	case IBMCAM_MODEL_3:
-	{	/* Preset hardware values */
-		static const struct {
-			unsigned short cv1;
-			unsigned short cv2;
-			unsigned short cv3;
-		} cv[7] = {
-			{ 0x05, 0x05, 0x0f },	/* Minimum */
-			{ 0x04, 0x04, 0x16 },
-			{ 0x02, 0x03, 0x16 },
-			{ 0x02, 0x08, 0x16 },
-			{ 0x01, 0x0c, 0x16 },
-			{ 0x01, 0x0e, 0x16 },
-			{ 0x01, 0x10, 0x16 }	/* Maximum */
-		};
-		int i = a_contrast / 2;
-		RESTRICT_TO_RANGE(i, 0, 6);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0067, cv[i].cv1);
-		ibmcam_model3_Packet1(uvd, 0x005b, cv[i].cv2);
-		ibmcam_model3_Packet1(uvd, 0x005c, cv[i].cv3);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_change_lighting_conditions()
- *
- * Camera model 1:
- * We have 3 levels of lighting conditions: 0=Bright, 1=Medium, 2=Low.
- *
- * Camera model 2:
- * We have 16 levels of lighting, 0 for bright light and up to 15 for
- * low light. But values above 5 or so are useless because camera is
- * not really capable to produce anything worth viewing at such light.
- * This setting may be altered only in certain camera state.
- *
- * Low lighting forces slower FPS. Lighting is set as a module parameter.
- *
- * History:
- * 1/5/00   Created.
- * 2/20/00  Added support for Model 2 cameras.
- */
-static void ibmcam_change_lighting_conditions(struct uvd *uvd)
-{
-	if (debug > 0)
-		dev_info(&uvd->dev->dev,
-			 "%s: Set lighting to %hu.\n", __func__, lighting);
-
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int ntries = 5;
-		int i;
-		for (i=0; i < ntries; i++)
-			ibmcam_Packet_Format1(uvd, light_27, (unsigned short) lighting);
-		break;
-	}
-	case IBMCAM_MODEL_2:
-#if 0
-		/*
-		 * This command apparently requires camera to be stopped. My
-		 * experiments showed that it -is- possible to alter the lighting
-		 * conditions setting "on the fly", but why bother? This setting does
-		 * not work reliably in all cases, so I decided simply to leave the
-		 * setting where Xirlink put it - in the camera setup phase. This code
-		 * is commented out because it does not work at -any- moment, so its
-		 * presence makes no sense. You may use it for experiments.
-		 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop camera */
-		ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Start camera */
-#endif
-		break;
-	case IBMCAM_MODEL_3:
-	case IBMCAM_MODEL_4:
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_set_sharpness()
- *
- * Cameras model 1 have internal smoothing feature. It is controlled by value in
- * range [0..6], where 0 is most smooth and 6 is most sharp (raw image, I guess).
- * Recommended value is 4. Cameras model 2 do not have this feature at all.
- */
-static void ibmcam_set_sharpness(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		static const unsigned short sa[] = { 0x11, 0x13, 0x16, 0x18, 0x1a, 0x8, 0x0a };
-		unsigned short i, sv;
-
-		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
-		if (debug > 0)
-			dev_info(&uvd->dev->dev, "%s: Set sharpness to %hu.\n",
-				 __func__, sharpness);
-
-		sv = sa[sharpness - SHARPNESS_MIN];
-		for (i=0; i < 2; i++) {
-			ibmcam_send_x_01_00_05	(uvd, unknown_88);
-			ibmcam_send_x_00_05		(uvd, sharp_13);
-			ibmcam_send_x_00_05_02	(uvd, sv);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	case IBMCAM_MODEL_4:
-		/* Models 2, 4 do not have this control */
-		break;
-	case IBMCAM_MODEL_3:
-	{	/*
-		 * "Use a table of magic numbers.
-		 *  This setting doesn't really change much.
-		 *  But that's how Windows does it."
-		 */
-		static const struct {
-			unsigned short sv1;
-			unsigned short sv2;
-			unsigned short sv3;
-			unsigned short sv4;
-		} sv[7] = {
-			{ 0x00, 0x00, 0x05, 0x14 },	/* Smoothest */
-			{ 0x01, 0x04, 0x05, 0x14 },
-			{ 0x02, 0x04, 0x05, 0x14 },
-			{ 0x03, 0x04, 0x05, 0x14 },
-			{ 0x03, 0x05, 0x05, 0x14 },
-			{ 0x03, 0x06, 0x05, 0x14 },
-			{ 0x03, 0x07, 0x05, 0x14 }	/* Sharpest */
-		};
-		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
-		RESTRICT_TO_RANGE(sharpness, 0, 6);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0060, sv[sharpness].sv1);
-		ibmcam_model3_Packet1(uvd, 0x0061, sv[sharpness].sv2);
-		ibmcam_model3_Packet1(uvd, 0x0062, sv[sharpness].sv3);
-		ibmcam_model3_Packet1(uvd, 0x0063, sv[sharpness].sv4);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_set_brightness()
- *
- * This procedure changes brightness of the picture.
- */
-static void ibmcam_set_brightness(struct uvd *uvd)
-{
-	static const unsigned short n = 1;
-
-	if (debug > 0)
-		dev_info(&uvd->dev->dev, "%s: Set brightness to %hu.\n",
-			 __func__, uvd->vpic.brightness);
-
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		unsigned short i, j, bv[3];
-		bv[0] = bv[1] = bv[2] = uvd->vpic.brightness >> 10;
-		if (bv[0] == (uvd->vpic_old.brightness >> 10))
-			return;
-		uvd->vpic_old.brightness = bv[0];
-		for (j=0; j < 3; j++)
-			for (i=0; i < n; i++)
-				ibmcam_Packet_Format1(uvd, bright_3x[j], bv[j]);
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	{
-		unsigned short i, j;
-		i = uvd->vpic.brightness >> 12;	/* 0 .. 15 */
-		j = 0x60 + i * ((0xee - 0x60) / 16);	/* 0x60 .. 0xee or so */
-		if (uvd->vpic_old.brightness == j)
-			break;
-		uvd->vpic_old.brightness = j;
-		ibmcam_model2_Packet1(uvd, mod2_brightness, j);
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{
-		/* Model 3: Brightness range 'i' in [0x0C..0x3F] */
-		unsigned short i =
-			0x0C + (uvd->vpic.brightness / (0xFFFF / (0x3F - 0x0C + 1)));
-		RESTRICT_TO_RANGE(i, 0x0C, 0x3F);
-		if (uvd->vpic_old.brightness == i)
-			break;
-		uvd->vpic_old.brightness = i;
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0036, i);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-		break;
-	}
-	case IBMCAM_MODEL_4:
-	{
-		/* Model 4: Brightness range 'i' in [0x04..0xb4] */
-		unsigned short i = 0x04 + (uvd->vpic.brightness / (0xFFFF / (0xb4 - 0x04 + 1)));
-		RESTRICT_TO_RANGE(i, 0x04, 0xb4);
-		if (uvd->vpic_old.brightness == i)
-			break;
-		uvd->vpic_old.brightness = i;
-		ibmcam_model4_BrightnessPacket(uvd, i);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-static void ibmcam_set_hue(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_2:
-	{
-		unsigned short hue = uvd->vpic.hue >> 9; /* 0 .. 7F */
-		if (uvd->vpic_old.hue == hue)
-			return;
-		uvd->vpic_old.hue = hue;
-		ibmcam_model2_Packet1(uvd, mod2_hue, hue);
-		/* ibmcam_model2_Packet1(uvd, mod2_saturation, sat); */
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{
-#if 0 /* This seems not to work. No problem, will fix programmatically */
-		unsigned short hue = 0x05 + (uvd->vpic.hue / (0xFFFF / (0x37 - 0x05 + 1)));
-		RESTRICT_TO_RANGE(hue, 0x05, 0x37);
-		if (uvd->vpic_old.hue == hue)
-			return;
-		uvd->vpic_old.hue = hue;
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x007e, hue);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-#endif
-		break;
-	}
-	case IBMCAM_MODEL_4:
-	{
-		unsigned short r_gain, g_gain, b_gain, hue;
-
-		/*
-		 * I am not sure r/g/b_gain variables exactly control gain
-		 * of those channels. Most likely they subtly change some
-		 * very internal image processing settings in the camera.
-		 * In any case, here is what they do, and feel free to tweak:
-		 *
-		 * r_gain: seriously affects red gain
-		 * g_gain: seriously affects green gain
-		 * b_gain: seriously affects blue gain
-		 * hue: changes average color from violet (0) to red (0xFF)
-		 *
-		 * These settings are preset for a decent white balance in
-		 * 320x240, 352x288 modes. Low-res modes exhibit higher contrast
-		 * and therefore may need different values here.
-		 */
-		hue = 20 + (uvd->vpic.hue >> 9);
-		switch (uvd->videosize) {
-		case VIDEOSIZE_128x96:
-			r_gain = 90;
-			g_gain = 166;
-			b_gain = 175;
-			break;
-		case VIDEOSIZE_160x120:
-			r_gain = 70;
-			g_gain = 166;
-			b_gain = 185;
-			break;
-		case VIDEOSIZE_176x144:
-			r_gain = 160;
-			g_gain = 175;
-			b_gain = 185;
-			break;
-		default:
-			r_gain = 120;
-			g_gain = 166;
-			b_gain = 175;
-			break;
-		}
-		RESTRICT_TO_RANGE(hue, 1, 0x7f);
-
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, g_gain, 0x0127);	/* Green gain */
-		ibmcam_veio(uvd, 0, r_gain, 0x012e);	/* Red gain */
-		ibmcam_veio(uvd, 0, b_gain, 0x0130);	/* Blue gain */
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, hue,    0x012d);	/* Hue */
-		ibmcam_veio(uvd, 0, 0xf545, 0x0124);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_adjust_picture()
- *
- * This procedure gets called from V4L interface to update picture settings.
- * Here we change brightness and contrast.
- */
-static void ibmcam_adjust_picture(struct uvd *uvd)
-{
-	ibmcam_adjust_contrast(uvd);
-	ibmcam_set_brightness(uvd);
-	ibmcam_set_hue(uvd);
-}
-
-static int ibmcam_model1_setup(struct uvd *uvd)
-{
-	const int ntries = 5;
-	int i;
-
-	ibmcam_veio(uvd, 1, 0x00, 0x0128);
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 0, 0x01, 0x0108);
-
-	ibmcam_veio(uvd, 0, 0x03, 0x0112);
-	ibmcam_veio(uvd, 1, 0x00, 0x0115);
-	ibmcam_veio(uvd, 0, 0x06, 0x0115);
-	ibmcam_veio(uvd, 1, 0x00, 0x0116);
-	ibmcam_veio(uvd, 0, 0x44, 0x0116);
-	ibmcam_veio(uvd, 1, 0x00, 0x0116);
-	ibmcam_veio(uvd, 0, 0x40, 0x0116);
-	ibmcam_veio(uvd, 1, 0x00, 0x0115);
-	ibmcam_veio(uvd, 0, 0x0e, 0x0115);
-	ibmcam_veio(uvd, 0, 0x19, 0x012c);
-
-	ibmcam_Packet_Format1(uvd, 0x00, 0x1e);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x0d);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x09);
-	ibmcam_Packet_Format1(uvd, 0x3b, 0x00);
-	ibmcam_Packet_Format1(uvd, 0x28, 0x22);
-	ibmcam_Packet_Format1(uvd, light_27, 0);
-	ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x2c, 0x00);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x30, 0x14);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x01, 0xe1);
-	ibmcam_PacketFormat2(uvd, 0x02, 0xcd);
-	ibmcam_PacketFormat2(uvd, 0x03, 0xcd);
-	ibmcam_PacketFormat2(uvd, 0x04, 0xfa);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x0a, 0x37);
-	ibmcam_PacketFormat2(uvd, 0x0b, 0xb8);
-	ibmcam_PacketFormat2(uvd, 0x0c, 0xf3);
-	ibmcam_PacketFormat2(uvd, 0x0d, 0xe3);
-	ibmcam_PacketFormat2(uvd, 0x0e, 0x0d);
-	ibmcam_PacketFormat2(uvd, 0x0f, 0xf2);
-	ibmcam_PacketFormat2(uvd, 0x10, 0xd5);
-	ibmcam_PacketFormat2(uvd, 0x11, 0xba);
-	ibmcam_PacketFormat2(uvd, 0x12, 0x53);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x16, 0x00);
-	ibmcam_PacketFormat2(uvd, 0x17, 0x28);
-	ibmcam_PacketFormat2(uvd, 0x18, 0x7d);
-	ibmcam_PacketFormat2(uvd, 0x19, 0xbe);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x00, 0x18);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x13, 0x18);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x14, 0x06);
-
-	/* This is default brightness */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x31, 0x37);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x32, 0x46);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x33, 0x55);
-
-	ibmcam_Packet_Format1(uvd, 0x2e, 0x04);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x2d, 0x04);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x29, 0x80);
-	ibmcam_Packet_Format1(uvd, 0x2c, 0x01);
-	ibmcam_Packet_Format1(uvd, 0x30, 0x17);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x34, 0x00);
-
-	ibmcam_veio(uvd, 0, 0x00, 0x0101);
-	ibmcam_veio(uvd, 0, 0x00, 0x010a);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_veio(uvd, 0, 0x80, 0x0103);
-		ibmcam_veio(uvd, 0, 0x60, 0x0105);
-		ibmcam_veio(uvd, 0, 0x0c, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x0b, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x00, 0x0129);
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
-		ibmcam_veio(uvd, 0, 0x8f, 0x0105);
-		ibmcam_veio(uvd, 0, 0x06, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x0d, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x03, 0x0129);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
-		ibmcam_veio(uvd, 0, 0x90, 0x0105);
-		ibmcam_veio(uvd, 0, 0x02, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x05, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x00, 0x0129);
-		break;
-	}
-
-	ibmcam_veio(uvd, 0, 0xff, 0x012b);
-
-	/* This is another brightness - don't know why */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x31, 0xc3);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x32, 0xd2);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x33, 0xe1);
-
-	/* Default contrast */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, contrast_14, 0x0a);
-
-	/* Default sharpness */
-	for (i=0; i < 2; i++)
-		ibmcam_PacketFormat2(uvd, sharp_13, 0x1a);	/* Level 4 FIXME */
-
-	/* Default lighting conditions */
-	ibmcam_Packet_Format1(uvd, light_27, lighting); /* 0=Bright 2=Low */
-
-	/* Assorted init */
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x36, 0x0102);
-		ibmcam_veio(uvd, 0, 0x1a, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-#if 0
-		ibmcam_veio(uvd, 0, 0x00, 0x0106);
-		ibmcam_veio(uvd, 0, 0x38, 0x0107);
-#else
-		ibmcam_veio(uvd, 0, 0x02, 0x0106);
-		ibmcam_veio(uvd, 0, 0x2a, 0x0107);
-#endif
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x04, 0x0102);
-		ibmcam_veio(uvd, 0, 0x02, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x01, 0x0106);
-		ibmcam_veio(uvd, 0, 0xca, 0x0107);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x08, 0x0102);
-		ibmcam_veio(uvd, 0, 0x01, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2f, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x03, 0x0106);
-		ibmcam_veio(uvd, 0, 0xf6, 0x0107);
-		break;
-	}
-	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
-}
-
-static int ibmcam_model2_setup(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
-	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
-	ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-	ibmcam_veio(uvd, 0, 0x0008, 0x012b);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0090, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0098, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_352x240:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x00da, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x00fe, 0x0107);	/* Unique to every mode*/
-		break;
-	}
-	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
-}
-
-/*
- * ibmcam_model1_setup_after_video_if()
- *
- * This code adds finishing touches to the video data interface.
- * Here we configure the frame rate and turn on the LED.
- */
-static void ibmcam_model1_setup_after_video_if(struct uvd *uvd)
-{
-	unsigned short internal_frame_rate;
-
-	RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
-	internal_frame_rate = FRAMERATE_MAX - framerate; /* 0=Fast 6=Slow */
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 0, internal_frame_rate, 0x0111);
-	ibmcam_veio(uvd, 0, 0x01, 0x0114);
-	ibmcam_veio(uvd, 0, 0xc0, 0x010c);
-}
-
-static void ibmcam_model2_setup_after_video_if(struct uvd *uvd)
-{
-	unsigned short setup_model2_rg2, setup_model2_sat, setup_model2_yb;
-
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x0050, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		break;
-	case VIDEOSIZE_320x240:
-	case VIDEOSIZE_352x240:
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x0040, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		break;
-	}
-	ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-	ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-
-	/*
-	 * Hardware settings, may affect CMOS sensor; not user controls!
-	 * -------------------------------------------------------------
-	 * 0x0004: no effect
-	 * 0x0006: hardware effect
-	 * 0x0008: no effect
-	 * 0x000a: stops video stream, probably important h/w setting
-	 * 0x000c: changes color in hardware manner (not user setting)
-	 * 0x0012: changes number of colors (does not affect speed)
-	 * 0x002a: no effect
-	 * 0x002c: hardware setting (related to scan lines)
-	 * 0x002e: stops video stream, probably important h/w setting
-	 */
-	ibmcam_model2_Packet1(uvd, 0x000a, 0x005c);
-	ibmcam_model2_Packet1(uvd, 0x0004, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x0006, 0x00fb);
-	ibmcam_model2_Packet1(uvd, 0x0008, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x000c, 0x0009);
-	ibmcam_model2_Packet1(uvd, 0x0012, 0x000a);
-	ibmcam_model2_Packet1(uvd, 0x002a, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x002c, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x002e, 0x0008);
-
-	/*
-	 * Function 0x0030 pops up all over the place. Apparently
-	 * it is a hardware control register, with every bit assigned to
-	 * do something.
-	 */
-	ibmcam_model2_Packet1(uvd, 0x0030, 0x0000);
-
-	/*
-	 * Magic control of CMOS sensor. Only lower values like
-	 * 0-3 work, and picture shifts left or right. Don't change.
-	 */
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0002);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0005); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Another hardware setting */
-		break;
-	case VIDEOSIZE_352x240:
-		/* This mode doesn't work as Windows programs it; changed to work */
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); /* Windows sets this to 8 */
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0003); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Windows sets this to 0x0045 */
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0003);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
-		break;
-	}
-
-	ibmcam_model2_Packet1(uvd, mod2_brightness, 0x005a);
-
-	/*
-	 * We have our own frame rate setting varying from 0 (slowest) to 6 (fastest).
-	 * The camera model 2 allows frame rate in range [0..0x1F] where 0 is also the
-	 * slowest setting. However for all practical reasons high settings make no
-	 * sense because USB is not fast enough to support high FPS. Be aware that
-	 * the picture datastream will be severely disrupted if you ask for
-	 * frame rate faster than allowed for the video size - see below:
-	 *
-	 * Allowable ranges (obtained experimentally on OHCI, K6-3, 450 MHz):
-	 * -----------------------------------------------------------------
-	 * 176x144: [6..31]
-	 * 320x240: [8..31]
-	 * 352x240: [10..31]
-	 * 352x288: [16..31] I have to raise lower threshold for stability...
-	 *
-	 * As usual, slower FPS provides better sensitivity.
-	 */
-	{
-		short hw_fps=31, i_framerate;
-
-		RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
-		i_framerate = FRAMERATE_MAX - framerate + FRAMERATE_MIN;
-		switch (uvd->videosize) {
-		case VIDEOSIZE_176x144:
-			hw_fps = 6 + i_framerate*4;
-			break;
-		case VIDEOSIZE_320x240:
-			hw_fps = 8 + i_framerate*3;
-			break;
-		case VIDEOSIZE_352x240:
-			hw_fps = 10 + i_framerate*2;
-			break;
-		case VIDEOSIZE_352x288:
-			hw_fps = 28 + i_framerate/2;
-			break;
-		}
-		if (uvd->debug > 0)
-			dev_info(&uvd->dev->dev, "Framerate (hardware): %hd.\n",
-				 hw_fps);
-		RESTRICT_TO_RANGE(hw_fps, 0, 31);
-		ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps);
-	}
-
-	/*
-	 * This setting does not visibly affect pictures; left it here
-	 * because it was present in Windows USB data stream. This function
-	 * does not allow arbitrary values and apparently is a bit mask, to
-	 * be activated only at appropriate time. Don't change it randomly!
-	 */
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x00c2);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0044);
-		break;
-	case VIDEOSIZE_352x240:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0046);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0048);
-		break;
-	}
-
-	ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
-
-	if (init_model2_rg2 >= 0) {
-		RESTRICT_TO_RANGE(init_model2_rg2, 0, 255);
-		setup_model2_rg2 = init_model2_rg2;
-	} else
-		setup_model2_rg2 = 0x002f;
-
-	if (init_model2_sat >= 0) {
-		RESTRICT_TO_RANGE(init_model2_sat, 0, 255);
-		setup_model2_sat = init_model2_sat;
-	} else
-		setup_model2_sat = 0x0034;
-
-	if (init_model2_yb >= 0) {
-		RESTRICT_TO_RANGE(init_model2_yb, 0, 255);
-		setup_model2_yb = init_model2_yb;
-	} else
-		setup_model2_yb = 0x00a0;
-
-	ibmcam_model2_Packet1(uvd, mod2_color_balance_rg2, setup_model2_rg2);
-	ibmcam_model2_Packet1(uvd, mod2_saturation, setup_model2_sat);
-	ibmcam_model2_Packet1(uvd, mod2_color_balance_yb, setup_model2_yb);
-	ibmcam_model2_Packet1(uvd, mod2_hue, uvd->vpic.hue >> 9); /* 0 .. 7F */;
-
-	/* Hardware control command */
-	ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
-
-	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go camera, go! */
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-static void ibmcam_model4_setup_after_video_if(struct uvd *uvd)
-{
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d8, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000b, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0025, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0048, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0035, 0x012e);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0048, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0090, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d6, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0018, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0007, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0001, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x002a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
-		ibmcam_veio(uvd, 0, 0x006d, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00f2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x008c, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0006, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0002, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00cf, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0025, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0048, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	}
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-static void ibmcam_model3_setup_after_video_if(struct uvd *uvd)
-{
-	int i;
-	/*
-	 * 01.01.08 - Added for RCA video in support -LO
-	 * This struct is used to init the Model3 cam to use the RCA video in port
-	 * instead of the CCD sensor.
-	 */
-	static const struct struct_initData initData[] = {
-		{0, 0x0000, 0x010c},
-		{0, 0x0006, 0x012c},
-		{0, 0x0078, 0x012d},
-		{0, 0x0046, 0x012f},
-		{0, 0xd141, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfea8, 0x0124},
-		{1, 0x0000, 0x0116},
-		{0, 0x0064, 0x0116},
-		{1, 0x0000, 0x0115},
-		{0, 0x0003, 0x0115},
-		{0, 0x0008, 0x0123},
-		{0, 0x0000, 0x0117},
-		{0, 0x0000, 0x0112},
-		{0, 0x0080, 0x0100},
-		{0, 0x0000, 0x0100},
-		{1, 0x0000, 0x0116},
-		{0, 0x0060, 0x0116},
-		{0, 0x0002, 0x0112},
-		{0, 0x0000, 0x0123},
-		{0, 0x0001, 0x0117},
-		{0, 0x0040, 0x0108},
-		{0, 0x0019, 0x012c},
-		{0, 0x0040, 0x0116},
-		{0, 0x000a, 0x0115},
-		{0, 0x000b, 0x0115},
-		{0, 0x0078, 0x012d},
-		{0, 0x0046, 0x012f},
-		{0, 0xd141, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfea8, 0x0124},
-		{0, 0x0064, 0x0116},
-		{0, 0x0000, 0x0115},
-		{0, 0x0001, 0x0115},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00aa, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f2, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x000f, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f8, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00fc, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f9, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x003c, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0027, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0019, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0021, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0006, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0045, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002a, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x000e, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002b, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f4, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002c, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0004, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002d, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0014, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002e, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0003, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002f, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0003, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0014, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0053, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0x0000, 0x0101},
-		{0, 0x00a0, 0x0103},
-		{0, 0x0078, 0x0105},
-		{0, 0x0000, 0x010a},
-		{0, 0x0024, 0x010b},
-		{0, 0x0028, 0x0119},
-		{0, 0x0088, 0x011b},
-		{0, 0x0002, 0x011d},
-		{0, 0x0003, 0x011e},
-		{0, 0x0000, 0x0129},
-		{0, 0x00fc, 0x012b},
-		{0, 0x0008, 0x0102},
-		{0, 0x0000, 0x0104},
-		{0, 0x0008, 0x011a},
-		{0, 0x0028, 0x011c},
-		{0, 0x0021, 0x012a},
-		{0, 0x0000, 0x0118},
-		{0, 0x0000, 0x0132},
-		{0, 0x0000, 0x0109},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0031, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00dc, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0032, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0020, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0030, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0008, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0x0003, 0x0106},
-		{0, 0x0062, 0x0107},
-		{0, 0x0003, 0x0111},
-	};
-#define NUM_INIT_DATA
-
-	unsigned short compression = 0;	/* 0=none, 7=best frame rate  */
-	int f_rate; /* 0=Fastest 7=slowest */
-
-	if (IBMCAM_T(uvd)->initialized)
-		return;
-
-	/* Internal frame rate is controlled by f_rate value */
-	f_rate = 7 - framerate;
-	RESTRICT_TO_RANGE(f_rate, 0, 7);
-
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0123);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0117);
-	ibmcam_veio(uvd, 0, 0x0040, 0x0108);
-	ibmcam_veio(uvd, 0, 0x0019, 0x012c);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0115);
-	ibmcam_veio(uvd, 0, 0x0003, 0x0115);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0115);
-	ibmcam_veio(uvd, 0, 0x000b, 0x0115);
-	ibmcam_model3_Packet1(uvd, 0x000a, 0x0040);
-	ibmcam_model3_Packet1(uvd, 0x000b, 0x00f6);
-	ibmcam_model3_Packet1(uvd, 0x000c, 0x0002);
-	ibmcam_model3_Packet1(uvd, 0x000d, 0x0020);
-	ibmcam_model3_Packet1(uvd, 0x000e, 0x0033);
-	ibmcam_model3_Packet1(uvd, 0x000f, 0x0007);
-	ibmcam_model3_Packet1(uvd, 0x0010, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0011, 0x0070);
-	ibmcam_model3_Packet1(uvd, 0x0012, 0x0030);
-	ibmcam_model3_Packet1(uvd, 0x0013, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0014, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0015, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0016, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0017, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0018, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x001e, 0x00c3);
-	ibmcam_model3_Packet1(uvd, 0x0020, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0028, 0x0010);
-	ibmcam_model3_Packet1(uvd, 0x0029, 0x0054);
-	ibmcam_model3_Packet1(uvd, 0x002a, 0x0013);
-	ibmcam_model3_Packet1(uvd, 0x002b, 0x0007);
-	ibmcam_model3_Packet1(uvd, 0x002d, 0x0028);
-	ibmcam_model3_Packet1(uvd, 0x002e, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0031, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0032, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0033, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0034, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0035, 0x0038);
-	ibmcam_model3_Packet1(uvd, 0x003a, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x003c, 0x001e);
-	ibmcam_model3_Packet1(uvd, 0x003f, 0x000a);
-	ibmcam_model3_Packet1(uvd, 0x0041, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0046, 0x003f);
-	ibmcam_model3_Packet1(uvd, 0x0047, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0050, 0x0005);
-	ibmcam_model3_Packet1(uvd, 0x0052, 0x001a);
-	ibmcam_model3_Packet1(uvd, 0x0053, 0x0003);
-	ibmcam_model3_Packet1(uvd, 0x005a, 0x006b);
-	ibmcam_model3_Packet1(uvd, 0x005d, 0x001e);
-	ibmcam_model3_Packet1(uvd, 0x005e, 0x0030);
-	ibmcam_model3_Packet1(uvd, 0x005f, 0x0041);
-	ibmcam_model3_Packet1(uvd, 0x0064, 0x0008);
-	ibmcam_model3_Packet1(uvd, 0x0065, 0x0015);
-	ibmcam_model3_Packet1(uvd, 0x0068, 0x000f);
-	ibmcam_model3_Packet1(uvd, 0x0079, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x007a, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x007c, 0x003f);
-	ibmcam_model3_Packet1(uvd, 0x0082, 0x000f);
-	ibmcam_model3_Packet1(uvd, 0x0085, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0099, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x009b, 0x0023);
-	ibmcam_model3_Packet1(uvd, 0x009c, 0x0022);
-	ibmcam_model3_Packet1(uvd, 0x009d, 0x0096);
-	ibmcam_model3_Packet1(uvd, 0x009e, 0x0096);
-	ibmcam_model3_Packet1(uvd, 0x009f, 0x000a);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x00a9, 0x0119);
-		ibmcam_veio(uvd, 0, 0x0016, 0x011b);
-		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		ibmcam_veio(uvd, 0, 0x0018, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
-		ibmcam_veio(uvd, 0, 0x0028, 0x011c);
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0118);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0028, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same */
-		ibmcam_veio(uvd, 0, 0x0000, 0x011e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		/* 4 commands from 160x120 skipped */
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		ibmcam_veio(uvd, 0, 0x00d9, 0x0119);
-		ibmcam_veio(uvd, 0, 0x0006, 0x011b);
-		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0010, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
-		ibmcam_veio(uvd, 0, 0x003f, 0x011c);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0118);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
-		break;
-	case VIDEOSIZE_640x480:
-		ibmcam_veio(uvd, 0, 0x00f0, 0x0105);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0038, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x00d9, 0x0119); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0006, 0x011b); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0004, 0x011d); /* NC */
-		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0016, 0x0104); /* NC */
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x003f, 0x011c); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_veio(uvd, 0, 0x001c, 0x0118); /* Same on 320x240, 640x480 */
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		ibmcam_veio(uvd, 0, 0x0040, 0x0101);
-		ibmcam_veio(uvd, 0, 0x0040, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132); /* Same on 320x240, 640x480 */
-		break;
-	}
-	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);	/* Hue */
-	ibmcam_model3_Packet1(uvd, 0x0036, 0x0011);	/* Brightness */
-	ibmcam_model3_Packet1(uvd, 0x0060, 0x0002);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0061, 0x0004);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0062, 0x0005);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0063, 0x0014);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
-	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
-	ibmcam_model3_Packet1(uvd, 0x0067, 0x0001);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x005b, 0x000c);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x005c, 0x0016);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x002c, 0x0003);	/* Was 1, broke 640x480 */
-	ibmcam_model3_Packet1(uvd, 0x002f, 0x002a);
-	ibmcam_model3_Packet1(uvd, 0x0030, 0x0029);
-	ibmcam_model3_Packet1(uvd, 0x0037, 0x0002);
-	ibmcam_model3_Packet1(uvd, 0x0038, 0x0059);
-	ibmcam_model3_Packet1(uvd, 0x003d, 0x002e);
-	ibmcam_model3_Packet1(uvd, 0x003e, 0x0028);
-	ibmcam_model3_Packet1(uvd, 0x0078, 0x0005);
-	ibmcam_model3_Packet1(uvd, 0x007b, 0x0011);
-	ibmcam_model3_Packet1(uvd, 0x007d, 0x004b);
-	ibmcam_model3_Packet1(uvd, 0x007f, 0x0022);
-	ibmcam_model3_Packet1(uvd, 0x0080, 0x000c);
-	ibmcam_model3_Packet1(uvd, 0x0081, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x0083, 0x00fd);
-	ibmcam_model3_Packet1(uvd, 0x0086, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x0087, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);
-	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
-	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
-	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0107);
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x000a);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0062, 0x0107);
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000b);
-		break;
-	case VIDEOSIZE_640x480:
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);	/* Adjustments */
-		ibmcam_veio(uvd, 0, 0x00b4, 0x0107);	/* Adjustments */
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0002); /* !Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x003e); /* !Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
-		break;
-	}
-
-	/* 01.01.08 - Added for RCA video in support -LO */
-	if(init_model3_input) {
-		if (debug > 0)
-			dev_info(&uvd->dev->dev, "Setting input to RCA.\n");
-		for (i=0; i < ARRAY_SIZE(initData); i++) {
-			ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index);
-		}
-	}
-
-	ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-/*
- * ibmcam_video_stop()
- *
- * This code tells camera to stop streaming. The interface remains
- * configured and bandwidth - claimed.
- */
-static void ibmcam_video_stop(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_veio(uvd, 0, 0x01, 0x0114);
-		ibmcam_veio(uvd, 0, 0xc0, 0x010c);
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_send_FF_04_02(uvd);
-		ibmcam_veio(uvd, 1, 0x00, 0x0100);
-		ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
-		break;
-	case IBMCAM_MODEL_2:
-case IBMCAM_MODEL_4:
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop the camera */
-
-		ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
-
-		ibmcam_veio(uvd, 0, 0x0080, 0x0100);	/* LED Off */
-		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0111);
-
-		ibmcam_model2_Packet1(uvd, 0x0030, 0x0002);
-
-		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
-		break;
-	case IBMCAM_MODEL_3:
-#if 1
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);
-
-		/* Here we are supposed to select video interface alt. setting 0 */
-		ibmcam_veio(uvd, 0, 0x0006, 0x012c);
-
-		ibmcam_model3_Packet1(uvd, 0x0046, 0x0000);
-
-		ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-		ibmcam_veio(uvd, 0, 0x0064, 0x0116);
-		ibmcam_veio(uvd, 1, 0x0000, 0x0115);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0115);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0123);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0117);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
-		ibmcam_veio(uvd, 0, 0x0080, 0x0100);
-		IBMCAM_T(uvd)->initialized = 0;
-#endif
-		break;
-	} /* switch */
-}
-
-/*
- * ibmcam_reinit_iso()
- *
- * This procedure sends couple of commands to the camera and then
- * resets the video pipe. This sequence was observed to reinit the
- * camera or, at least, to initiate ISO data stream.
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_reinit_iso(struct uvd *uvd, int do_stop)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-		if (do_stop)
-			ibmcam_video_stop(uvd);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_model1_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_2:
-		ibmcam_model2_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_3:
-		ibmcam_video_stop(uvd);
-		ibmcam_model3_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_4:
-		ibmcam_model4_setup_after_video_if(uvd);
-		break;
-	}
-}
-
-static void ibmcam_video_start(struct uvd *uvd)
-{
-	ibmcam_change_lighting_conditions(uvd);
-	ibmcam_set_sharpness(uvd);
-	ibmcam_reinit_iso(uvd, 0);
-}
-
-/*
- * Return negative code on failure, 0 on success.
- */
-static int ibmcam_setup_on_open(struct uvd *uvd)
-{
-	int setup_ok = 0; /* Success by default */
-	/* Send init sequence only once, it's large! */
-	if (!IBMCAM_T(uvd)->initialized) { /* FIXME rename */
-		switch (IBMCAM_T(uvd)->camera_model) {
-		case IBMCAM_MODEL_1:
-			setup_ok = ibmcam_model1_setup(uvd);
-			break;
-		case IBMCAM_MODEL_2:
-			setup_ok = ibmcam_model2_setup(uvd);
-			break;
-		case IBMCAM_MODEL_3:
-		case IBMCAM_MODEL_4:
-			/* We do all setup when Isoc stream is requested */
-			break;
-		}
-		IBMCAM_T(uvd)->initialized = (setup_ok != 0);
-	}
-	return setup_ok;
-}
-
-static void ibmcam_configure_video(struct uvd *uvd)
-{
-	if (uvd == NULL)
-		return;
-
-	RESTRICT_TO_RANGE(init_brightness, 0, 255);
-	RESTRICT_TO_RANGE(init_contrast, 0, 255);
-	RESTRICT_TO_RANGE(init_color, 0, 255);
-	RESTRICT_TO_RANGE(init_hue, 0, 255);
-	RESTRICT_TO_RANGE(hue_correction, 0, 255);
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	uvd->vpic.colour = init_color << 8;
-	uvd->vpic.hue = init_hue << 8;
-	uvd->vpic.brightness = init_brightness << 8;
-	uvd->vpic.contrast = init_contrast << 8;
-	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
-	uvd->vpic.depth = 24;
-	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "IBM USB Camera");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
-	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
-	uvd->vcap.minwidth = min_canvasWidth;
-	uvd->vcap.minheight = min_canvasHeight;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-}
-
-/*
- * ibmcam_probe()
- *
- * This procedure queries device descriptor and accepts the interface
- * if it looks like IBM C-it camera.
- *
- * History:
- * 22-Jan-2000 Moved camera init code to ibmcam_open()
- * 27=Jan-2000 Changed to use static structures, added locking.
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- * 03-Jul-2000 Fixed endianness bug.
- * 12-Nov-2000 Reworked to comply with new probe() signature.
- * 23-Jan-2001 Added compatibility with 2.2.x kernels.
- */
-static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas, model=0, canvasX=0, canvasY=0;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	__u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
-	unsigned char video_ep = 0;
-
-	if (debug >= 1)
-		dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	/* Check the version/revision */
-	switch (le16_to_cpu(dev->descriptor.bcdDevice)) {
-	case 0x0002:
-		if (ifnum != 2)
-			return -ENODEV;
-		model = IBMCAM_MODEL_1;
-		break;
-	case 0x030A:
-		if (ifnum != 0)
-			return -ENODEV;
-		if ((le16_to_cpu(dev->descriptor.idProduct) == NETCAM_PRODUCT_ID) ||
-		    (le16_to_cpu(dev->descriptor.idProduct) == VEO_800D_PRODUCT_ID))
-			model = IBMCAM_MODEL_4;
-		else
-			model = IBMCAM_MODEL_2;
-		break;
-	case 0x0301:
-		if (ifnum != 0)
-			return -ENODEV;
-		model = IBMCAM_MODEL_3;
-		break;
-	default:
-		err("IBM camera with revision 0x%04x is not supported.",
-			le16_to_cpu(dev->descriptor.bcdDevice));
-		return -ENODEV;
-	}
-
-	/* Print detailed info on what we found so far */
-	do {
-		char *brand = NULL;
-		switch (le16_to_cpu(dev->descriptor.idProduct)) {
-		case NETCAM_PRODUCT_ID:
-			brand = "IBM NetCamera";
-			break;
-		case VEO_800C_PRODUCT_ID:
-			brand = "Veo Stingray [800C]";
-			break;
-		case VEO_800D_PRODUCT_ID:
-			brand = "Veo Stingray [800D]";
-			break;
-		case IBMCAM_PRODUCT_ID:
-		default:
-			brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
-			break;
-		}
-		dev_info(&dev->dev,
-			 "%s USB camera found (model %d, rev. 0x%04x)\n",
-			 brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
-	} while (0);
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (debug > 0)
-		dev_info(&dev->dev, "Number of alternate settings=%d.\n",
-			 nas);
-	if (nas < 2) {
-		err("Too few alternate settings for this camera!");
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 1) {
-			err("Interface %d. has %u. endpoints!",
-			    ifnum, (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[0].desc;
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!", ifnum);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!", ifnum);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (actInterface < 0) {
-				actInterface = i;
-				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-				if (debug > 0)
-					dev_info(&dev->dev,
-						 "Active setting=%d. "
-						 "maxPS=%d.\n", i, maxPS);
-			} else
-				err("More than one active alt. setting! Ignoring #%d.", i);
-		}
-	}
-	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
-		err("Failed to recognize the camera!");
-		return -ENODEV;
-	}
-
-	/* Validate options */
-	switch (model) {
-	case IBMCAM_MODEL_1:
-		RESTRICT_TO_RANGE(lighting, 0, 2);
-		RESTRICT_TO_RANGE(size, SIZE_128x96, SIZE_352x288);
-		if (framerate < 0)
-			framerate = 2;
-		canvasX = 352;
-		canvasY = 288;
-		break;
-	case IBMCAM_MODEL_2:
-		RESTRICT_TO_RANGE(lighting, 0, 15);
-		RESTRICT_TO_RANGE(size, SIZE_176x144, SIZE_352x240);
-		if (framerate < 0)
-			framerate = 2;
-		canvasX = 352;
-		canvasY = 240;
-		break;
-	case IBMCAM_MODEL_3:
-		RESTRICT_TO_RANGE(lighting, 0, 15); /* FIXME */
-		switch (size) {
-		case SIZE_160x120:
-			canvasX = 160;
-			canvasY = 120;
-			if (framerate < 0)
-				framerate = 2;
-			RESTRICT_TO_RANGE(framerate, 0, 5);
-			break;
-		default:
-			dev_info(&dev->dev, "IBM camera: using 320x240\n");
-			size = SIZE_320x240;
-			/* No break here */
-		case SIZE_320x240:
-			canvasX = 320;
-			canvasY = 240;
-			if (framerate < 0)
-				framerate = 3;
-			RESTRICT_TO_RANGE(framerate, 0, 5);
-			break;
-		case SIZE_640x480:
-			canvasX = 640;
-			canvasY = 480;
-			framerate = 0;	/* Slowest, and maybe even that is too fast */
-			break;
-		}
-		break;
-	case IBMCAM_MODEL_4:
-		RESTRICT_TO_RANGE(lighting, 0, 2);
-		switch (size) {
-		case SIZE_128x96:
-			canvasX = 128;
-			canvasY = 96;
-			break;
-		case SIZE_160x120:
-			canvasX = 160;
-			canvasY = 120;
-			break;
-		default:
-			dev_info(&dev->dev, "IBM NetCamera: using 176x144\n");
-			size = SIZE_176x144;
-			/* No break here */
-		case SIZE_176x144:
-			canvasX = 176;
-			canvasY = 144;
-			break;
-		case SIZE_320x240:
-			canvasX = 320;
-			canvasY = 240;
-			break;
-		case SIZE_352x288:
-			canvasX = 352;
-			canvasY = 288;
-			break;
-		}
-		break;
-	default:
-		err("IBM camera: Model %d. not supported!", model);
-		return -ENODEV;
-	}
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		/* Here uvd is a fully allocated uvd object */
-		uvd->flags = flags;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = ifnum;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
-		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
-		uvd->canvas = VIDEOSIZE(canvasX, canvasY);
-		uvd->videosize = ibmcam_size_to_videosize(size);
-
-		/* Initialize ibmcam-specific data */
-		assert(IBMCAM_T(uvd) != NULL);
-		IBMCAM_T(uvd)->camera_model = model;
-		IBMCAM_T(uvd)->initialized = 0;
-
-		ibmcam_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-	}
-	usb_set_intfdata (intf, uvd);
-	return 0;
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) },	/* Model 1 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) },	/* Model 3 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
-	{ }  /* Terminating entry */
-};
-
-/*
- * ibmcam_init()
- *
- * This code is run to initialize the driver.
- *
- * History:
- * 1/27/00  Reworked to use statically allocated ibmcam structures.
- * 21/10/00 Completely redesigned to use usbvideo services.
- */
-static int __init ibmcam_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = ibmcam_probe;
-	cbTbl.setupOnOpen = ibmcam_setup_on_open;
-	cbTbl.videoStart = ibmcam_video_start;
-	cbTbl.videoStop = ibmcam_video_stop;
-	cbTbl.processData = ibmcam_ProcessIsocData;
-	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
-	cbTbl.adjustPicture = ibmcam_adjust_picture;
-	cbTbl.getFPS = ibmcam_calculate_fps;
-	return usbvideo_register(
-		&cams,
-		MAX_IBMCAM,
-		sizeof(ibmcam_t),
-		"ibmcam",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-static void __exit ibmcam_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-module_init(ibmcam_init);
-module_exit(ibmcam_cleanup);
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
deleted file mode 100644
index 562e1d170be0..000000000000
--- a/drivers/media/video/usbvideo/konicawc.c
+++ /dev/null
@@ -1,992 +0,0 @@
-/*
- * konicawc.c - konica webcam driver
- *
- * Author: Simon Evans <spse@secret.org.uk>
- *
- * Copyright (C) 2002 Simon Evans
- *
- * Licence: GPL
- *
- * Driver for USB webcams based on Konica chipset. This
- * chipset is used in Intel YC76 camera.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <linux/gfp.h>
-
-#include "usbvideo.h"
-
-#define MAX_BRIGHTNESS	108
-#define MAX_CONTRAST	108
-#define MAX_SATURATION	108
-#define MAX_SHARPNESS	108
-#define MAX_WHITEBAL	372
-#define MAX_SPEED	6
-
-
-#define MAX_CAMERAS	1
-
-#define DRIVER_VERSION	"v1.4"
-#define DRIVER_DESC	"Konica Webcam driver"
-
-enum ctrl_req {
-	SetWhitebal	= 0x01,
-	SetBrightness	= 0x02,
-	SetSharpness	= 0x03,
-	SetContrast	= 0x04,
-	SetSaturation	= 0x05,
-};
-
-
-enum frame_sizes {
-	SIZE_160X120	= 0,
-	SIZE_160X136	= 1,
-	SIZE_176X144	= 2,
-	SIZE_320X240	= 3,
-
-};
-
-#define MAX_FRAME_SIZE	SIZE_320X240
-
-static struct usbvideo *cams;
-
-#ifdef CONFIG_USB_DEBUG
-static int debug;
-#define DEBUG(n, format, arg...) \
-	if (n <= debug) {	 \
-		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
-	}
-#else
-#define DEBUG(n, arg...)
-static const int debug;
-#endif
-
-
-/* Some default values for initial camera settings,
-   can be set by modprobe */
-
-static int size;
-static int speed = 6;		/* Speed (fps) 0 (slowest) to 6 (fastest) */
-static int brightness =	MAX_BRIGHTNESS/2;
-static int contrast =	MAX_CONTRAST/2;
-static int saturation =	MAX_SATURATION/2;
-static int sharpness =	MAX_SHARPNESS/2;
-static int whitebal =	3*(MAX_WHITEBAL/4);
-
-static const int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 };
-
-/* These FPS speeds are from the windows config box. They are
- * indexed on size (0-2) and speed (0-6). Divide by 3 to get the
- * real fps.
- */
-
-static const int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 },
-			       { 24, 40, 48, 60, 72, 80, 100 },
-			       { 18, 30, 36, 45, 54, 60, 75  },
-			       { 6,  10, 12, 15, 18, 21, 25  } };
-
-struct cam_size {
-	u16	width;
-	u16	height;
-	u8	cmd;
-};
-
-static const struct cam_size camera_sizes[] = { { 160, 120, 0x7 },
-					  { 160, 136, 0xa },
-					  { 176, 144, 0x4 },
-					  { 320, 240, 0x5 } };
-
-struct konicawc {
-	u8 brightness;		/* camera uses 0 - 9, x11 for real value */
-	u8 contrast;		/* as above */
-	u8 saturation;		/* as above */
-	u8 sharpness;		/* as above */
-	u8 white_bal;		/* 0 - 33, x11 for real value */
-	u8 speed;		/* Stored as 0 - 6, used as index in spd_to_* (above) */
-	u8 size;		/* Frame Size */
-	int height;
-	int width;
-	struct urb *sts_urb[USBVIDEO_NUMSBUF];
-	u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC];
-	struct urb *last_data_urb;
-	int lastframe;
-	int cur_frame_size;	/* number of bytes in current frame size */
-	int maxline;		/* number of lines per frame */
-	int yplanesz;		/* Number of bytes in the Y plane */
-	unsigned int buttonsts:1;
-#ifdef CONFIG_INPUT
-	struct input_dev *input;
-	char input_physname[64];
-#endif
-};
-
-
-#define konicawc_set_misc(uvd, req, value, index)		konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0)
-#define konicawc_get_misc(uvd, req, value, index, buf, sz)	konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz)
-#define konicawc_set_value(uvd, value, index)			konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0)
-
-
-static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
-{
-	int retval = usb_control_msg(uvd->dev,
-		dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0),
-		    request, 0x40 | dir, value, index, buf, len, 1000);
-	return retval < 0 ? retval : 0;
-}
-
-
-static inline void konicawc_camera_on(struct uvd *uvd)
-{
-	DEBUG(0, "camera on");
-	konicawc_set_misc(uvd, 0x2, 1, 0x0b);
-}
-
-
-static inline void konicawc_camera_off(struct uvd *uvd)
-{
-	DEBUG(0, "camera off");
-	konicawc_set_misc(uvd, 0x2, 0, 0x0b);
-}
-
-
-static void konicawc_set_camera_size(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08);
-	cam->width = camera_sizes[cam->size].width;
-	cam->height = camera_sizes[cam->size].height;
-	cam->yplanesz = cam->height * cam->width;
-	cam->cur_frame_size = (cam->yplanesz * 3) / 2;
-	cam->maxline = cam->yplanesz / 256;
-	uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-}
-
-
-static int konicawc_setup_on_open(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
-	    cam->brightness * 11);
-	konicawc_set_value(uvd, cam->brightness, SetBrightness);
-	DEBUG(1, "setting white balance to %d (%d)", cam->white_bal,
-	    cam->white_bal * 11);
-	konicawc_set_value(uvd, cam->white_bal, SetWhitebal);
-	DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
-	    cam->contrast * 11);
-	konicawc_set_value(uvd, cam->contrast, SetContrast);
-	DEBUG(1, "setting saturation to %d (%d)", cam->saturation,
-	    cam->saturation * 11);
-	konicawc_set_value(uvd, cam->saturation, SetSaturation);
-	DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness,
-	    cam->sharpness * 11);
-	konicawc_set_value(uvd, cam->sharpness, SetSharpness);
-	konicawc_set_camera_size(uvd);
-	cam->lastframe = -2;
-	cam->buttonsts = 0;
-	return 0;
-}
-
-
-static void konicawc_adjust_picture(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_camera_off(uvd);
-	DEBUG(1, "new brightness: %d", uvd->vpic.brightness);
-	uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness;
-	if(cam->brightness != uvd->vpic.brightness / 11) {
-	   cam->brightness = uvd->vpic.brightness / 11;
-	   DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
-	       cam->brightness * 11);
-	   konicawc_set_value(uvd, cam->brightness, SetBrightness);
-	}
-
-	DEBUG(1, "new contrast: %d", uvd->vpic.contrast);
-	uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast;
-	if(cam->contrast != uvd->vpic.contrast / 11) {
-		cam->contrast = uvd->vpic.contrast / 11;
-		DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
-		    cam->contrast * 11);
-		konicawc_set_value(uvd, cam->contrast, SetContrast);
-	}
-	konicawc_camera_on(uvd);
-}
-
-#ifdef CONFIG_INPUT
-
-static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
-{
-	struct input_dev *input_dev;
-	int error;
-
-	usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
-	strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
-
-	cam->input = input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_warn(&dev->dev,
-			 "Not enough memory for camera's input device\n");
-		return;
-	}
-
-	input_dev->name = "Konicawc snapshot button";
-	input_dev->phys = cam->input_physname;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->dev.parent = &dev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
-
-	error = input_register_device(cam->input);
-	if (error) {
-		dev_warn(&dev->dev,
-			 "Failed to register camera's input device, err: %d\n",
-			 error);
-		input_free_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void konicawc_unregister_input(struct konicawc *cam)
-{
-	if (cam->input) {
-		input_unregister_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void konicawc_report_buttonstat(struct konicawc *cam)
-{
-	if (cam->input) {
-		input_report_key(cam->input, KEY_CAMERA, cam->buttonsts);
-		input_sync(cam->input);
-	}
-}
-
-#else
-
-static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { }
-static inline void konicawc_unregister_input(struct konicawc *cam) { }
-static inline void konicawc_report_buttonstat(struct konicawc *cam) { }
-
-#endif /* CONFIG_INPUT */
-
-static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb)
-{
-	char *cdata;
-	int i, totlen = 0;
-	unsigned char *status = stsurb->transfer_buffer;
-	int keep = 0, discard = 0, bad = 0;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	for (i = 0; i < dataurb->number_of_packets; i++) {
-		int button = cam->buttonsts;
-		unsigned char sts;
-		int n = dataurb->iso_frame_desc[i].actual_length;
-		int st = dataurb->iso_frame_desc[i].status;
-		cdata = dataurb->transfer_buffer +
-			dataurb->iso_frame_desc[i].offset;
-
-		/* Detect and ignore errored packets */
-		if (st < 0) {
-			DEBUG(1, "Data error: packet=%d. len=%d. status=%d.",
-			      i, n, st);
-			uvd->stats.iso_err_count++;
-			continue;
-		}
-
-		/* Detect and ignore empty packets */
-		if (n <= 0) {
-			uvd->stats.iso_skip_count++;
-			continue;
-		}
-
-		/* See what the status data said about the packet */
-		sts = *(status+stsurb->iso_frame_desc[i].offset);
-
-		/* sts: 0x80-0xff: frame start with frame number (ie 0-7f)
-		 * otherwise:
-		 * bit 0 0: keep packet
-		 *	 1: drop packet (padding data)
-		 *
-		 * bit 4 0 button not clicked
-		 *       1 button clicked
-		 * button is used to `take a picture' (in software)
-		 */
-
-		if(sts < 0x80) {
-			button = !!(sts & 0x40);
-			sts &= ~0x40;
-		}
-
-		/* work out the button status, but don't do
-		   anything with it for now */
-
-		if(button != cam->buttonsts) {
-			DEBUG(2, "button: %sclicked", button ? "" : "un");
-			cam->buttonsts = button;
-			konicawc_report_buttonstat(cam);
-		}
-
-		if(sts == 0x01) { /* drop frame */
-			discard++;
-			continue;
-		}
-
-		if((sts > 0x01) && (sts < 0x80)) {
-			dev_info(&uvd->dev->dev, "unknown status %2.2x\n",
-				 sts);
-			bad++;
-			continue;
-		}
-		if(!sts && cam->lastframe == -2) {
-			DEBUG(2, "dropping frame looking for image start");
-			continue;
-		}
-
-		keep++;
-		if(sts & 0x80) { /* frame start */
-			unsigned char marker[] = { 0, 0xff, 0, 0x00 };
-
-			if(cam->lastframe == -2) {
-				DEBUG(2, "found initial image");
-				cam->lastframe = -1;
-			}
-
-			marker[3] = sts & 0x7F;
-			RingQueue_Enqueue(&uvd->dp, marker, 4);
-			totlen += 4;
-		}
-
-		totlen += n;	/* Little local accounting */
-		RingQueue_Enqueue(&uvd->dp, cdata, n);
-	}
-	DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes",
-		    keep, discard, bad, totlen);
-	return totlen;
-}
-
-
-static void resubmit_urb(struct uvd *uvd, struct urb *urb)
-{
-	int i, ret;
-	for (i = 0; i < FRAMES_PER_DESC; i++) {
-		urb->iso_frame_desc[i].status = 0;
-	}
-	urb->dev = uvd->dev;
-	urb->status = 0;
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length);
-	if(ret)
-		err("usb_submit_urb error (%d)", ret);
-
-}
-
-
-static void konicawc_isoc_irq(struct urb *urb)
-{
-	struct uvd *uvd = urb->context;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	/* We don't want to do anything if we are about to be removed! */
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-
-	if (!uvd->streaming) {
-		DEBUG(1, "Not streaming, but interrupt!");
-		return;
-	}
-
-	DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length);
-
-	uvd->stats.urb_count++;
-
-	if (urb->transfer_buffer_length > 32) {
-		cam->last_data_urb = urb;
-		return;
-	}
-	/* Copy the data received into ring queue */
-	if(cam->last_data_urb) {
-		int len = 0;
-		if(urb->start_frame != cam->last_data_urb->start_frame)
-			err("Lost sync on frames");
-		else if (!urb->status && !cam->last_data_urb->status)
-			len = konicawc_compress_iso(uvd, cam->last_data_urb, urb);
-
-		resubmit_urb(uvd, cam->last_data_urb);
-		resubmit_urb(uvd, urb);
-		cam->last_data_urb = NULL;
-		uvd->stats.urb_length = len;
-		uvd->stats.data_count += len;
-		if(len)
-			RingQueue_WakeUpInterruptible(&uvd->dp);
-		return;
-	}
-	return;
-}
-
-
-static int konicawc_start_data(struct uvd *uvd)
-{
-	struct usb_device *dev = uvd->dev;
-	int i, errFlag;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int pktsz;
-	struct usb_interface *intf;
-	struct usb_host_interface *interface = NULL;
-
-	intf = usb_ifnum_to_if(dev, uvd->iface);
-	if (intf)
-		interface = usb_altnum_to_altsetting(intf,
-				spd_to_iface[cam->speed]);
-	if (!interface)
-		return -ENXIO;
-	pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize);
-	DEBUG(1, "pktsz = %d", pktsz);
-	if (!CAMERA_IS_OPERATIONAL(uvd)) {
-		err("Camera is not operational");
-		return -EFAULT;
-	}
-	uvd->curframe = -1;
-	konicawc_camera_on(uvd);
-	/* Alternate interface 1 is is the biggest frame size */
-	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
-	if (i < 0) {
-		err("usb_set_interface error");
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-
-	/* We double buffer the Iso lists */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		int j, k;
-		struct urb *urb = uvd->sbuf[i].urb;
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = uvd->sbuf[i].data;
-		urb->complete = konicawc_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC;
-		for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) {
-			urb->iso_frame_desc[j].offset = k;
-			urb->iso_frame_desc[j].length = pktsz;
-		}
-
-		urb = cam->sts_urb[i];
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = cam->sts_buf[i];
-		urb->complete = konicawc_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = FRAMES_PER_DESC;
-		for (j=0; j < FRAMES_PER_DESC; j++) {
-			urb->iso_frame_desc[j].offset = j;
-			urb->iso_frame_desc[j].length = 1;
-		}
-	}
-
-	cam->last_data_urb = NULL;
-
-	/* Submit all URBs */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL);
-		if (errFlag)
-			err("usb_submit_isoc(%d) ret %d", i, errFlag);
-
-		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
-		if (errFlag)
-			err ("usb_submit_isoc(%d) ret %d", i, errFlag);
-	}
-
-	uvd->streaming = 1;
-	DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp);
-	return 0;
-}
-
-
-static void konicawc_stop_data(struct uvd *uvd)
-{
-	int i, j;
-	struct konicawc *cam;
-
-	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
-		return;
-
-	konicawc_camera_off(uvd);
-	uvd->streaming = 0;
-	cam = (struct konicawc *)uvd->user_data;
-	cam->last_data_urb = NULL;
-
-	/* Unschedule all of the iso td's */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_kill_urb(uvd->sbuf[i].urb);
-		usb_kill_urb(cam->sts_urb[i]);
-	}
-
-	if (!uvd->remove_pending) {
-		/* Set packet size to 0 */
-		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
-		if (j < 0) {
-			err("usb_set_interface() error %d.", j);
-			uvd->last_error = j;
-		}
-	}
-}
-
-
-static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int maxline = cam->maxline;
-	int yplanesz = cam->yplanesz;
-
-	assert(frame != NULL);
-
-	DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz);
-	DEBUG(3, "Frame state = %d", frame->scanstate);
-
-	if(frame->scanstate == ScanState_Scanning) {
-		int drop = 0;
-		int curframe;
-		int fdrops = 0;
-		DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp));
-		while(RingQueue_GetLength(&uvd->dp) >= 4) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) {
-				curframe = RING_QUEUE_PEEK(&uvd->dp, 3);
-				if(cam->lastframe >= 0) {
-					fdrops = (0x80 + curframe - cam->lastframe) & 0x7F;
-					fdrops--;
-					if(fdrops) {
-						dev_info(&uvd->dev->dev,
-							 "Dropped %d frames "
-							 "(%d -> %d)\n",
-							 fdrops,
-							 cam->lastframe,
-							 curframe);
-					}
-				}
-				cam->lastframe = curframe;
-				frame->curline = 0;
-				frame->scanstate = ScanState_Lines;
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4);
-				break;
-			}
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-			drop++;
-		}
-		if(drop)
-			DEBUG(2, "dropped %d bytes looking for new frame", drop);
-	}
-
-	if(frame->scanstate == ScanState_Scanning)
-		return;
-
-	/* Try to move data from queue into frame buffer
-	 * We get data in blocks of 384 bytes made up of:
-	 * 256 Y, 64 U, 64 V.
-	 * This needs to be written out as a Y plane, a U plane and a V plane.
-	 */
-
-	while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) {
-		/* Y */
-		RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256);
-		/* U */
-		RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64);
-		/* V */
-		RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64);
-		frame->seqRead_Length += 384;
-		frame->curline++;
-	}
-	/* See if we filled the frame */
-	if (frame->curline == maxline) {
-		DEBUG(5, "got whole frame");
-
-		frame->frameState = FrameState_Done_Hold;
-		frame->curline = 0;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-
-static int konicawc_find_fps(int size, int fps)
-{
-	int i;
-
-	fps *= 3;
-	DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps);
-	if(fps <= spd_to_fps[size][0])
-		return 0;
-
-	if(fps >= spd_to_fps[size][MAX_SPEED])
-		return MAX_SPEED;
-
-	for(i = 0; i < MAX_SPEED; i++) {
-		if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) {
-			DEBUG(2, "fps %d between %d and %d", fps, i, i+1);
-			if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps))
-				return i;
-			else
-				return i+1;
-		}
-	}
-	return MAX_SPEED+1;
-}
-
-
-static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int newspeed = cam->speed;
-	int newsize;
-	int x = vw->width;
-	int y = vw->height;
-	int fps = vw->flags;
-
-	if(x > 0 && y > 0) {
-		DEBUG(2, "trying to find size %d,%d", x, y);
-		for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) {
-			if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y))
-				break;
-		}
-	} else {
-		newsize = cam->size;
-	}
-
-	if(newsize > MAX_FRAME_SIZE) {
-		DEBUG(1, "couldn't find size %d,%d", x, y);
-		return -EINVAL;
-	}
-
-	if(fps > 0) {
-		DEBUG(1, "trying to set fps to %d", fps);
-		newspeed = konicawc_find_fps(newsize, fps);
-		DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]);
-	}
-
-	if(newspeed > MAX_SPEED)
-		return -EINVAL;
-
-	DEBUG(1, "setting size to %d speed to %d", newsize, newspeed);
-	if((newsize == cam->size) && (newspeed == cam->speed)) {
-		DEBUG(1, "Nothing to do");
-		return 0;
-	}
-	DEBUG(0, "setting to  %dx%d @ %d fps", camera_sizes[newsize].width,
-	     camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3);
-
-	konicawc_stop_data(uvd);
-	uvd->ifaceAltActive = spd_to_iface[newspeed];
-	DEBUG(1, "new interface = %d", uvd->ifaceAltActive);
-	cam->speed = newspeed;
-
-	if(cam->size != newsize) {
-		cam->size = newsize;
-		konicawc_set_camera_size(uvd);
-	}
-
-	/* Flush the input queue and clear any current frame in progress */
-
-	RingQueue_Flush(&uvd->dp);
-	cam->lastframe = -2;
-	if(uvd->curframe != -1) {
-		uvd->frame[uvd->curframe].curline = 0;
-		uvd->frame[uvd->curframe].seqRead_Length = 0;
-		uvd->frame[uvd->curframe].seqRead_Index = 0;
-	}
-
-	konicawc_start_data(uvd);
-	return 0;
-}
-
-
-static int konicawc_calculate_fps(struct uvd *uvd)
-{
-	struct konicawc *cam = uvd->user_data;
-	return spd_to_fps[cam->size][cam->speed]/3;
-}
-
-
-static void konicawc_configure_video(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	u8 buf[2];
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS);
-	RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST);
-	RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION);
-	RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS);
-	RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL);
-
-	cam->brightness = brightness / 11;
-	cam->contrast = contrast / 11;
-	cam->saturation = saturation / 11;
-	cam->sharpness = sharpness / 11;
-	cam->white_bal = whitebal / 11;
-
-	uvd->vpic.colour = 108;
-	uvd->vpic.hue = 108;
-	uvd->vpic.brightness = brightness;
-	uvd->vpic.contrast = contrast;
-	uvd->vpic.whiteness = whitebal;
-	uvd->vpic.depth = 6;
-	uvd->vpic.palette = VIDEO_PALETTE_YUV420P;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "Konica Webcam");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width;
-	uvd->vcap.minheight = camera_sizes[SIZE_160X120].height;
-	uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width;
-	uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0 ;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-
-	/* Talk to device */
-	DEBUG(1, "device init");
-	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
-		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
-	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
-		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
-	if(konicawc_set_misc(uvd, 0x2, 0, 0xd))
-		DEBUG(2, "2,0,d failed");
-	DEBUG(1, "setting initial values");
-}
-
-static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	unsigned char video_ep = 0;
-
-	DEBUG(1, "konicawc_probe(%p)", intf);
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	dev_info(&intf->dev, "Konica Webcam (rev. 0x%04x)\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice));
-	RESTRICT_TO_RANGE(speed, 0, MAX_SPEED);
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (nas != 8) {
-		err("Incorrect number of alternate settings (%d) for this camera!", nas);
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 2) {
-			err("Interface %d. has %u. endpoints!",
-			    interface->desc.bInterfaceNumber,
-			    (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[1].desc;
-		DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x",
-		    endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize));
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (i == spd_to_iface[speed]) {
-				/* This one is the requested one */
-				actInterface = i;
-			}
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS)
-			maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-	}
-	if(actInterface == -1) {
-		err("Cant find required endpoint");
-		return -ENODEV;
-	}
-
-	DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS);
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		struct konicawc *cam = (struct konicawc *)(uvd->user_data);
-		/* Here uvd is a fully allocated uvd object */
-		for(i = 0; i < USBVIDEO_NUMSBUF; i++) {
-			cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-			if(cam->sts_urb[i] == NULL) {
-				while(i--) {
-					usb_free_urb(cam->sts_urb[i]);
-				}
-				err("can't allocate urbs");
-				return -ENOMEM;
-			}
-		}
-		cam->speed = speed;
-		RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240);
-		cam->width = camera_sizes[size].width;
-		cam->height = camera_sizes[size].height;
-		cam->size = size;
-
-		uvd->flags = 0;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P;
-		uvd->defaultPalette = VIDEO_PALETTE_YUV420P;
-		uvd->canvas = VIDEOSIZE(320, 240);
-		uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-
-		/* Initialize konicawc specific data */
-		konicawc_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		uvd->max_frame_size = (320 * 240 * 3)/2;
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-
-		konicawc_register_input(cam, dev);
-	}
-
-	if (uvd) {
-		usb_set_intfdata (intf, uvd);
-		return 0;
-	}
-	return -EIO;
-}
-
-
-static void konicawc_free_uvd(struct uvd *uvd)
-{
-	int i;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_unregister_input(cam);
-
-	for (i = 0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_free_urb(cam->sts_urb[i]);
-		cam->sts_urb[i] = NULL;
-	}
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */
-	{ }  /* Terminating entry */
-};
-
-
-static int __init konicawc_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = konicawc_probe;
-	cbTbl.setupOnOpen = konicawc_setup_on_open;
-	cbTbl.processData = konicawc_process_isoc;
-	cbTbl.getFPS = konicawc_calculate_fps;
-	cbTbl.setVideoMode = konicawc_set_video_mode;
-	cbTbl.startDataPump = konicawc_start_data;
-	cbTbl.stopDataPump = konicawc_stop_data;
-	cbTbl.adjustPicture = konicawc_adjust_picture;
-	cbTbl.userFree = konicawc_free_uvd;
-	return usbvideo_register(
-		&cams,
-		MAX_CAMERAS,
-		sizeof(struct konicawc),
-		"konicawc",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-
-static void __exit konicawc_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-module_param(speed, int, 0);
-MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)");
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240");
-module_param(brightness, int, 0);
-MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108");
-module_param(contrast, int, 0);
-MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108");
-module_param(saturation, int, 0);
-MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108");
-module_param(sharpness, int, 0);
-MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108");
-module_param(whitebal, int, 0);
-MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363");
-
-#ifdef CONFIG_USB_DEBUG
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-#endif
-
-module_init(konicawc_init);
-module_exit(konicawc_cleanup);
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
deleted file mode 100644
index fbd1b6392290..000000000000
--- a/drivers/media/video/usbvideo/ultracam.c
+++ /dev/null
@@ -1,685 +0,0 @@
-/*
- * USB NB Camera driver
- *
- * HISTORY:
- * 25-Dec-2002 Dmitri      Removed lighting, sharpness parameters, methods.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "usbvideo.h"
-
-#define	ULTRACAM_VENDOR_ID	0x0461
-#define	ULTRACAM_PRODUCT_ID	0x0813
-
-#define MAX_CAMERAS		4	/* How many devices we allow to connect */
-
-/*
- * This structure lives in uvd_t->user field.
- */
-typedef struct {
-	int initialized;	/* Had we already sent init sequence? */
-	int camera_model;	/* What type of IBM camera we got? */
-	int has_hdr;
-} ultracam_t;
-#define	ULTRACAM_T(uvd)	((ultracam_t *)((uvd)->user_data))
-
-static struct usbvideo *cams = NULL;
-
-static int debug;
-
-static int flags; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
-
-static const int min_canvasWidth  = 8;
-static const int min_canvasHeight = 4;
-
-#define FRAMERATE_MIN	0
-#define FRAMERATE_MAX	6
-static int framerate = -1;
-
-/*
- * Here we define several initialization variables. They may
- * be used to automatically set color, hue, brightness and
- * contrast to desired values. This is particularly useful in
- * case of webcams (which have no controls and no on-screen
- * output) and also when a client V4L software is used that
- * does not have some of those controls. In any case it's
- * good to have startup values as options.
- *
- * These values are all in [0..255] range. This simplifies
- * operation. Note that actual values of V4L variables may
- * be scaled up (as much as << 8). User can see that only
- * on overlay output, however, or through a V4L client.
- */
-static int init_brightness = 128;
-static int init_contrast = 192;
-static int init_color = 128;
-static int init_hue = 128;
-static int hue_correction = 128;
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-module_param(flags, int, 0);
-MODULE_PARM_DESC(flags,
-		"Bitfield: 0=VIDIOCSYNC, "
-		"1=B/W, "
-		"2=show hints, "
-		"3=show stats, "
-		"4=test pattern, "
-		"5=separate frames, "
-		"6=clean frames");
-module_param(framerate, int, 0);
-MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
-
-module_param(init_brightness, int, 0);
-MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
-module_param(init_contrast, int, 0);
-MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
-module_param(init_color, int, 0);
-MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
-module_param(init_hue, int, 0);
-MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
-module_param(hue_correction, int, 0);
-MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
-
-/*
- * ultracam_ProcessIsocData()
- *
- * Generic routine to parse the ring queue data. It employs either
- * ultracam_find_header() or ultracam_parse_lines() to do most
- * of work.
- *
- * 02-Nov-2000 First (mostly dummy) version.
- * 06-Nov-2000 Rewrote to dump all data into frame.
- */
-static void ultracam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	int n;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-
-	/* Try to move data from queue into frame buffer */
-	n = RingQueue_GetLength(&uvd->dp);
-	if (n > 0) {
-		int m;
-		/* See how much spare we have left */
-		m = uvd->max_frame_size - frame->seqRead_Length;
-		if (n > m)
-			n = m;
-		/* Now move that much data into frame buffer */
-		RingQueue_Dequeue(
-			&uvd->dp,
-			frame->data + frame->seqRead_Length,
-			m);
-		frame->seqRead_Length += m;
-	}
-	/* See if we filled the frame */
-	if (frame->seqRead_Length >= uvd->max_frame_size) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-/*
- * ultracam_veio()
- *
- * History:
- * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
- */
-static int ultracam_veio(
-	struct uvd *uvd,
-	unsigned char req,
-	unsigned short value,
-	unsigned short index,
-	int is_out)
-{
-	static const char proc[] = "ultracam_veio";
-	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
-	int i;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return 0;
-
-	if (!is_out) {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_rcvctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value,
-			index,
-			cp,
-			sizeof(cp),
-			1000);
-#if 1
-		dev_info(&uvd->dev->dev,
-			 "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
-			 "(req=$%02x val=$%04x ind=$%04x)\n",
-			 cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
-			 req, value, index);
-#endif
-	} else {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_sndctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value,
-			index,
-			NULL,
-			0,
-			1000);
-	}
-	if (i < 0) {
-		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
-		    proc, i);
-		uvd->last_error = i;
-	}
-	return i;
-}
-
-/*
- * ultracam_calculate_fps()
- */
-static int ultracam_calculate_fps(struct uvd *uvd)
-{
-	return 3 + framerate*4 + framerate/2;
-}
-
-/*
- * ultracam_adjust_contrast()
- */
-static void ultracam_adjust_contrast(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_set_brightness()
- *
- * This procedure changes brightness of the picture.
- */
-static void ultracam_set_brightness(struct uvd *uvd)
-{
-}
-
-static void ultracam_set_hue(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_adjust_picture()
- *
- * This procedure gets called from V4L interface to update picture settings.
- * Here we change brightness and contrast.
- */
-static void ultracam_adjust_picture(struct uvd *uvd)
-{
-	ultracam_adjust_contrast(uvd);
-	ultracam_set_brightness(uvd);
-	ultracam_set_hue(uvd);
-}
-
-/*
- * ultracam_video_stop()
- *
- * This code tells camera to stop streaming. The interface remains
- * configured and bandwidth - claimed.
- */
-static void ultracam_video_stop(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_reinit_iso()
- *
- * This procedure sends couple of commands to the camera and then
- * resets the video pipe. This sequence was observed to reinit the
- * camera or, at least, to initiate ISO data stream.
- */
-static void ultracam_reinit_iso(struct uvd *uvd, int do_stop)
-{
-}
-
-static void ultracam_video_start(struct uvd *uvd)
-{
-	ultracam_reinit_iso(uvd, 0);
-}
-
-static int ultracam_resetPipe(struct uvd *uvd)
-{
-	usb_clear_halt(uvd->dev, uvd->video_endp);
-	return 0;
-}
-
-static int ultracam_alternateSetting(struct uvd *uvd, int setting)
-{
-	static const char proc[] = "ultracam_alternateSetting";
-	int i;
-	i = usb_set_interface(uvd->dev, uvd->iface, setting);
-	if (i < 0) {
-		err("%s: usb_set_interface error", proc);
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-	return 0;
-}
-
-/*
- * Return negative code on failure, 0 on success.
- */
-static int ultracam_setup_on_open(struct uvd *uvd)
-{
-	int setup_ok = 0; /* Success by default */
-	/* Send init sequence only once, it's large! */
-	if (!ULTRACAM_T(uvd)->initialized) {
-		ultracam_alternateSetting(uvd, 0x04);
-		ultracam_alternateSetting(uvd, 0x00);
-		ultracam_veio(uvd, 0x02, 0x0004, 0x000b, 1);
-		ultracam_veio(uvd, 0x02, 0x0001, 0x0005, 1);
-		ultracam_veio(uvd, 0x02, 0x8000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x00b0, 0x0001, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0002, 1);
-		ultracam_veio(uvd, 0x00, 0x000c, 0x0003, 1);
-		ultracam_veio(uvd, 0x00, 0x000b, 0x0004, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0005, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0006, 1);
-		ultracam_veio(uvd, 0x00, 0x0079, 0x0007, 1);
-		ultracam_veio(uvd, 0x00, 0x003b, 0x0008, 1);
-		ultracam_veio(uvd, 0x00, 0x0002, 0x000f, 1);
-		ultracam_veio(uvd, 0x00, 0x0001, 0x0010, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0011, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00bf, 1);
-		ultracam_veio(uvd, 0x00, 0x0001, 0x00c0, 1);
-		ultracam_veio(uvd, 0x00, 0x0010, 0x00cb, 1);
-		ultracam_veio(uvd, 0x01, 0x00a4, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0010, 0x0002, 1);
-		ultracam_veio(uvd, 0x01, 0x0066, 0x0007, 1);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
-		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
-		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
-		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
-		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
-		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
-		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
-		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0011, 1);
-		ultracam_veio(uvd, 0x01, 0x0001, 0x0012, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0013, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0014, 1);
-		ultracam_veio(uvd, 0x01, 0x0087, 0x0051, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0052, 1);
-		ultracam_veio(uvd, 0x01, 0x0058, 0x0053, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0054, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0040, 1);
-		ultracam_veio(uvd, 0x01, 0x0010, 0x0041, 1);
-		ultracam_veio(uvd, 0x01, 0x0020, 0x0042, 1);
-		ultracam_veio(uvd, 0x01, 0x0030, 0x0043, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0044, 1);
-		ultracam_veio(uvd, 0x01, 0x0050, 0x0045, 1);
-		ultracam_veio(uvd, 0x01, 0x0060, 0x0046, 1);
-		ultracam_veio(uvd, 0x01, 0x0070, 0x0047, 1);
-		ultracam_veio(uvd, 0x01, 0x0080, 0x0048, 1);
-		ultracam_veio(uvd, 0x01, 0x0090, 0x0049, 1);
-		ultracam_veio(uvd, 0x01, 0x00a0, 0x004a, 1);
-		ultracam_veio(uvd, 0x01, 0x00b0, 0x004b, 1);
-		ultracam_veio(uvd, 0x01, 0x00c0, 0x004c, 1);
-		ultracam_veio(uvd, 0x01, 0x00d0, 0x004d, 1);
-		ultracam_veio(uvd, 0x01, 0x00e0, 0x004e, 1);
-		ultracam_veio(uvd, 0x01, 0x00f0, 0x004f, 1);
-		ultracam_veio(uvd, 0x01, 0x00ff, 0x0050, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0056, 1);
-		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0004, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0002, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0020, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0040, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0017, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x00c0, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x02, 0xc040, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0008, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0009, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000b, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000c, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000d, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000e, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000f, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0010, 0);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
-		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
-		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
-		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
-		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
-		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
-		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
-		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0001, 0);
-		ultracam_veio(uvd, 0x01, 0x0064, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0059, 0x0051, 1);
-		ultracam_veio(uvd, 0x01, 0x003f, 0x0052, 1);
-		ultracam_veio(uvd, 0x01, 0x0094, 0x0053, 1);
-		ultracam_veio(uvd, 0x01, 0x00ff, 0x0011, 1);
-		ultracam_veio(uvd, 0x01, 0x0003, 0x0012, 1);
-		ultracam_veio(uvd, 0x01, 0x00f7, 0x0013, 1);
-		ultracam_veio(uvd, 0x00, 0x0009, 0x0011, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x0020, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0010, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_alternateSetting(uvd, 0x04);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0006, 1);
-		ultracam_veio(uvd, 0x02, 0x9000, 0x0007, 1);
-		ultracam_veio(uvd, 0x02, 0x0042, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x000b, 0);
-		ultracam_resetPipe(uvd);
-		ULTRACAM_T(uvd)->initialized = (setup_ok != 0);
-	}
-	return setup_ok;
-}
-
-static void ultracam_configure_video(struct uvd *uvd)
-{
-	if (uvd == NULL)
-		return;
-
-	RESTRICT_TO_RANGE(init_brightness, 0, 255);
-	RESTRICT_TO_RANGE(init_contrast, 0, 255);
-	RESTRICT_TO_RANGE(init_color, 0, 255);
-	RESTRICT_TO_RANGE(init_hue, 0, 255);
-	RESTRICT_TO_RANGE(hue_correction, 0, 255);
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	uvd->vpic.colour = init_color << 8;
-	uvd->vpic.hue = init_hue << 8;
-	uvd->vpic.brightness = init_brightness << 8;
-	uvd->vpic.contrast = init_contrast << 8;
-	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
-	uvd->vpic.depth = 24;
-	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "IBM Ultra Camera");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
-	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
-	uvd->vcap.minwidth = min_canvasWidth;
-	uvd->vcap.minheight = min_canvasHeight;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-}
-
-/*
- * ultracam_probe()
- *
- * This procedure queries device descriptor and accepts the interface
- * if it looks like our camera.
- *
- * History:
- * 12-Nov-2000 Reworked to comply with new probe() signature.
- * 23-Jan-2001 Added compatibility with 2.2.x kernels.
- */
-static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	unsigned char video_ep = 0;
-
-	if (debug >= 1)
-		dev_info(&intf->dev, "ultracam_probe\n");
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	dev_info(&intf->dev, "IBM Ultra camera found (rev. 0x%04x)\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice));
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (debug > 0)
-		dev_info(&intf->dev, "Number of alternate settings=%d.\n",
-			 nas);
-	if (nas < 8) {
-		err("Too few alternate settings for this camera!");
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 1) {
-			err("Interface %d. has %u. endpoints!",
-			    interface->desc.bInterfaceNumber,
-			    (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[0].desc;
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (actInterface < 0) {
-				actInterface = i;
-				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-				if (debug > 0)
-					dev_info(&intf->dev,
-						 "Active setting=%d. "
-						 "maxPS=%d.\n", i, maxPS);
-			} else {
-				/* Got another active alt. setting */
-				if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) {
-					/* This one is better! */
-					actInterface = i;
-					maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-					if (debug > 0) {
-						dev_info(&intf->dev,
-							 "Even better ctive "
-							 "setting=%d. "
-							 "maxPS=%d.\n",
-							 i, maxPS);
-					}
-				}
-			}
-		}
-	}
-	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
-		err("Failed to recognize the camera!");
-		return -ENODEV;
-	}
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		/* Here uvd is a fully allocated uvd object */
-		uvd->flags = flags;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
-		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
-		uvd->canvas = VIDEOSIZE(640, 480);	/* FIXME */
-		uvd->videosize = uvd->canvas; /* ultracam_size_to_videosize(size);*/
-
-		/* Initialize ibmcam-specific data */
-		assert(ULTRACAM_T(uvd) != NULL);
-		ULTRACAM_T(uvd)->camera_model = 0; /* Not used yet */
-		ULTRACAM_T(uvd)->initialized = 0;
-
-		ultracam_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-	}
-
-	if (uvd) {
-		usb_set_intfdata (intf, uvd);
-		return 0;
-	}
-	return -EIO;
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) },
-	{ }  /* Terminating entry */
-};
-
-/*
- * ultracam_init()
- *
- * This code is run to initialize the driver.
- */
-static int __init ultracam_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = ultracam_probe;
-	cbTbl.setupOnOpen = ultracam_setup_on_open;
-	cbTbl.videoStart = ultracam_video_start;
-	cbTbl.videoStop = ultracam_video_stop;
-	cbTbl.processData = ultracam_ProcessIsocData;
-	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
-	cbTbl.adjustPicture = ultracam_adjust_picture;
-	cbTbl.getFPS = ultracam_calculate_fps;
-	return usbvideo_register(
-		&cams,
-		MAX_CAMERAS,
-		sizeof(ultracam_t),
-		"ultracam",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-static void __exit ultracam_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-MODULE_DEVICE_TABLE(usb, id_table);
-MODULE_LICENSE("GPL");
-
-module_init(ultracam_init);
-module_exit(ultracam_cleanup);
-- 
cgit v1.2.3


From 745da4280f272840976d47afba22ed853f07e1b2 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 07:27:47 -0300
Subject: [media] usbvideo: deprecate the vicam driver

Move usbvideo to staging and mark it deprecated.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig             |    2 -
 drivers/media/video/Makefile            |    4 -
 drivers/media/video/usbvideo/Kconfig    |   12 -
 drivers/media/video/usbvideo/Makefile   |    2 -
 drivers/media/video/usbvideo/usbvideo.c | 2230 -------------------------------
 drivers/media/video/usbvideo/usbvideo.h |  395 ------
 drivers/media/video/usbvideo/vicam.c    |  952 -------------
 7 files changed, 3597 deletions(-)
 delete mode 100644 drivers/media/video/usbvideo/Kconfig
 delete mode 100644 drivers/media/video/usbvideo/Makefile
 delete mode 100644 drivers/media/video/usbvideo/usbvideo.c
 delete mode 100644 drivers/media/video/usbvideo/usbvideo.h
 delete mode 100644 drivers/media/video/usbvideo/vicam.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 4b751ef47a83..3655b30254d9 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -915,8 +915,6 @@ source "drivers/media/video/cx231xx/Kconfig"
 
 source "drivers/media/video/usbvision/Kconfig"
 
-source "drivers/media/video/usbvideo/Kconfig"
-
 source "drivers/media/video/et61x251/Kconfig"
 
 config USB_SE401
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index ace7b6eaf5b8..2f2e3ac877b4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -133,10 +133,6 @@ obj-$(CONFIG_USB_GSPCA)         += gspca/
 
 obj-$(CONFIG_VIDEO_HDPVR)	+= hdpvr/
 
-obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
-obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
-obj-$(CONFIG_USB_VICAM)         += usbvideo/
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 obj-$(CONFIG_USB_S2255)		+= s2255drv.o
 
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
deleted file mode 100644
index 357860d42a8b..000000000000
--- a/drivers/media/video/usbvideo/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-config VIDEO_USBVIDEO
-	tristate
-
-config USB_VICAM
-	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on VIDEO_V4L1 && EXPERIMENTAL
-	select VIDEO_USBVIDEO
-	---help---
-	  Say Y here if you have 3com homeconnect camera (vicam).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vicam.
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
deleted file mode 100644
index 3c99a9a2d8d3..000000000000
--- a/drivers/media/video/usbvideo/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
-obj-$(CONFIG_USB_VICAM)         += vicam.o
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
deleted file mode 100644
index f1fcf9744961..000000000000
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ /dev/null
@@ -1,2230 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/io.h>
-
-#include "usbvideo.h"
-
-#if defined(MAP_NR)
-#define	virt_to_page(v)	MAP_NR(v)	/* Kernels 2.2.x */
-#endif
-
-static int video_nr = -1;
-module_param(video_nr, int, 0);
-
-/*
- * Local prototypes.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf);
-static void usbvideo_CameraRelease(struct uvd *uvd);
-
-static long usbvideo_v4l_ioctl(struct file *file,
-			      unsigned int cmd, unsigned long arg);
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
-static int usbvideo_v4l_open(struct file *file);
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
-			     size_t count, loff_t *ppos);
-static int usbvideo_v4l_close(struct file *file);
-
-static int usbvideo_StartDataPump(struct uvd *uvd);
-static void usbvideo_StopDataPump(struct uvd *uvd);
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
-						struct usbvideo_frame *frame);
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-static void *usbvideo_rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void usbvideo_rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-static void RingQueue_Initialize(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	init_waitqueue_head(&rq->wqh);
-}
-
-static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
-{
-	/* Make sure the requested size is a power of 2 and
-	   round up if necessary. This allows index wrapping
-	   using masks rather than modulo */
-
-	int i = 1;
-	assert(rq != NULL);
-	assert(rqLen > 0);
-
-	while(rqLen >> i)
-		i++;
-	if(rqLen != 1 << (i-1))
-		rqLen = 1 << i;
-
-	rq->length = rqLen;
-	rq->ri = rq->wi = 0;
-	rq->queue = usbvideo_rvmalloc(rq->length);
-	assert(rq->queue != NULL);
-}
-
-static int RingQueue_IsAllocated(const struct RingQueue *rq)
-{
-	if (rq == NULL)
-		return 0;
-	return (rq->queue != NULL) && (rq->length > 0);
-}
-
-static void RingQueue_Free(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	if (RingQueue_IsAllocated(rq)) {
-		usbvideo_rvfree(rq->queue, rq->length);
-		rq->queue = NULL;
-		rq->length = 0;
-	}
-}
-
-int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
-{
-	int rql, toread;
-
-	assert(rq != NULL);
-	assert(dst != NULL);
-
-	rql = RingQueue_GetLength(rq);
-	if(!rql)
-		return 0;
-
-	/* Clip requested length to available data */
-	if(len > rql)
-		len = rql;
-
-	toread = len;
-	if(rq->ri > rq->wi) {
-		/* Read data from tail */
-		int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
-		memcpy(dst, rq->queue + rq->ri, read);
-		toread -= read;
-		dst += read;
-		rq->ri = (rq->ri + read) & (rq->length-1);
-	}
-	if(toread) {
-		/* Read data from head */
-		memcpy(dst, rq->queue + rq->ri, toread);
-		rq->ri = (rq->ri + toread) & (rq->length-1);
-	}
-	return len;
-}
-
-EXPORT_SYMBOL(RingQueue_Dequeue);
-
-int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
-{
-	int enqueued = 0;
-
-	assert(rq != NULL);
-	assert(cdata != NULL);
-	assert(rq->length > 0);
-	while (n > 0) {
-		int m, q_avail;
-
-		/* Calculate the largest chunk that fits the tail of the ring */
-		q_avail = rq->length - rq->wi;
-		if (q_avail <= 0) {
-			rq->wi = 0;
-			q_avail = rq->length;
-		}
-		m = n;
-		assert(q_avail > 0);
-		if (m > q_avail)
-			m = q_avail;
-
-		memcpy(rq->queue + rq->wi, cdata, m);
-		RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
-		cdata += m;
-		enqueued += m;
-		n -= m;
-	}
-	return enqueued;
-}
-
-EXPORT_SYMBOL(RingQueue_Enqueue);
-
-static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	interruptible_sleep_on(&rq->wqh);
-}
-
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	if (waitqueue_active(&rq->wqh))
-		wake_up_interruptible(&rq->wqh);
-}
-
-EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
-
-void RingQueue_Flush(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	rq->ri = 0;
-	rq->wi = 0;
-}
-
-EXPORT_SYMBOL(RingQueue_Flush);
-
-
-/*
- * usbvideo_VideosizeToString()
- *
- * This procedure converts given videosize value to readable string.
- *
- * History:
- * 07-Aug-2000 Created.
- * 19-Oct-2000 Reworked for usbvideo module.
- */
-static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
-{
-	char tmp[40];
-	int n;
-
-	n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
-	assert(n < sizeof(tmp));
-	if ((buf == NULL) || (bufLen < n))
-		err("usbvideo_VideosizeToString: buffer is too small.");
-	else
-		memmove(buf, tmp, n);
-}
-
-/*
- * usbvideo_OverlayChar()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
-				 int x, int y, int ch)
-{
-	static const unsigned short digits[16] = {
-		0xF6DE, /* 0 */
-		0x2492, /* 1 */
-		0xE7CE, /* 2 */
-		0xE79E, /* 3 */
-		0xB792, /* 4 */
-		0xF39E, /* 5 */
-		0xF3DE, /* 6 */
-		0xF492, /* 7 */
-		0xF7DE, /* 8 */
-		0xF79E, /* 9 */
-		0x77DA, /* a */
-		0xD75C, /* b */
-		0xF24E, /* c */
-		0xD6DC, /* d */
-		0xF34E, /* e */
-		0xF348  /* f */
-	};
-	unsigned short digit;
-	int ix, iy;
-	int value;
-
-	if ((uvd == NULL) || (frame == NULL))
-		return;
-
-	value = hex_to_bin(ch);
-	if (value < 0)
-		return;
-	digit = digits[value];
-
-	for (iy=0; iy < 5; iy++) {
-		for (ix=0; ix < 3; ix++) {
-			if (digit & 0x8000) {
-				if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
-/* TODO */				RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
-				}
-			}
-			digit = digit << 1;
-		}
-	}
-}
-
-/*
- * usbvideo_OverlayString()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
-				   int x, int y, const char *str)
-{
-	while (*str) {
-		usbvideo_OverlayChar(uvd, frame, x, y, *str);
-		str++;
-		x += 4; /* 3 pixels character + 1 space */
-	}
-}
-
-/*
- * usbvideo_OverlayStats()
- *
- * Overlays important debugging information.
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	const int y_diff = 8;
-	char tmp[16];
-	int x = 10, y=10;
-	long i, j, barLength;
-	const int qi_x1 = 60, qi_y1 = 10;
-	const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
-
-	/* Call the user callback, see if we may proceed after that */
-	if (VALID_CALLBACK(uvd, overlayHook)) {
-		if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
-			return;
-	}
-
-	/*
-	 * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
-	 * Left edge symbolizes the queue index 0; right edge symbolizes
-	 * the full capacity of the queue.
-	 */
-	barLength = qi_x2 - qi_x1 - 2;
-	if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
-/* TODO */	long u_lo, u_hi, q_used;
-		long m_ri, m_wi, m_lo, m_hi;
-
-		/*
-		 * Determine fill zones (used areas of the queue):
-		 * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
-		 *
-		 * if u_lo < 0 then there is no first filler.
-		 */
-
-		q_used = RingQueue_GetLength(&uvd->dp);
-		if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
-			u_hi = uvd->dp.length;
-			u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
-		} else {
-			u_hi = (q_used + uvd->dp.ri);
-			u_lo = -1;
-		}
-
-		/* Convert byte indices into screen units */
-		m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
-		m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
-		m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
-		m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
-
-		for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
-			for (i=qi_x1; i < qi_x2; i++) {
-				/* Draw border lines */
-				if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
-				    (i == qi_x1) || (i == (qi_x2 - 1))) {
-					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
-					continue;
-				}
-				/* For all other points the Y coordinate does not matter */
-				if ((i >= m_ri) && (i <= (m_ri + 3))) {
-					RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
-				} else if ((i >= m_wi) && (i <= (m_wi + 3))) {
-					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
-				} else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
-					RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
-			}
-		}
-	}
-
-	sprintf(tmp, "%8lx", uvd->stats.frame_num);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.urb_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.urb_length);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.data_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.header_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.colour);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.hue);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-}
-
-/*
- * usbvideo_ReportStatistics()
- *
- * This procedure prints packet and transfer statistics.
- *
- * History:
- * 14-Jan-2000 Corrected default multiplier.
- */
-static void usbvideo_ReportStatistics(const struct uvd *uvd)
-{
-	if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
-		unsigned long allPackets, badPackets, goodPackets, percent;
-		allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
-		badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
-		goodPackets = allPackets - badPackets;
-		/* Calculate percentage wisely, remember integer limits */
-		assert(allPackets != 0);
-		if (goodPackets < (((unsigned long)-1)/100))
-			percent = (100 * goodPackets) / allPackets;
-		else
-			percent = goodPackets / (allPackets / 100);
-		dev_info(&uvd->dev->dev,
-			 "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n",
-			 allPackets, badPackets, percent);
-		if (uvd->iso_packet_len > 0) {
-			unsigned long allBytes, xferBytes;
-			char multiplier = ' ';
-			allBytes = allPackets * uvd->iso_packet_len;
-			xferBytes = uvd->stats.data_count;
-			assert(allBytes != 0);
-			if (xferBytes < (((unsigned long)-1)/100))
-				percent = (100 * xferBytes) / allBytes;
-			else
-				percent = xferBytes / (allBytes / 100);
-			/* Scale xferBytes for easy reading */
-			if (xferBytes > 10*1024) {
-				xferBytes /= 1024;
-				multiplier = 'K';
-				if (xferBytes > 10*1024) {
-					xferBytes /= 1024;
-					multiplier = 'M';
-					if (xferBytes > 10*1024) {
-						xferBytes /= 1024;
-						multiplier = 'G';
-						if (xferBytes > 10*1024) {
-							xferBytes /= 1024;
-							multiplier = 'T';
-						}
-					}
-				}
-			}
-			dev_info(&uvd->dev->dev,
-				 "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n",
-				 xferBytes, multiplier, percent);
-		}
-	}
-}
-
-/*
- * usbvideo_TestPattern()
- *
- * Procedure forms a test pattern (yellow grid on blue background).
- *
- * Parameters:
- * fullframe: if TRUE then entire frame is filled, otherwise the procedure
- *	      continues from the current scanline.
- * pmode      0: fill the frame with solid blue color (like on VCR or TV)
- *	      1: Draw a colored grid
- *
- * History:
- * 01-Feb-2000 Created.
- */
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
-{
-	struct usbvideo_frame *frame;
-	int num_cell = 0;
-	int scan_length = 0;
-	static int num_pass;
-
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return;
-	}
-	if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
-		err("%s: uvd->curframe=%d.", __func__, uvd->curframe);
-		return;
-	}
-
-	/* Grab the current frame */
-	frame = &uvd->frame[uvd->curframe];
-
-	/* Optionally start at the beginning */
-	if (fullframe) {
-		frame->curline = 0;
-		frame->seqRead_Length = 0;
-	}
-#if 0
-	{	/* For debugging purposes only */
-		char tmp[20];
-		usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
-		dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp);
-	}
-#endif
-	/* Form every scan line */
-	for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
-		int i;
-		unsigned char *f = frame->data +
-			(VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
-		for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
-			unsigned char cb=0x80;
-			unsigned char cg = 0;
-			unsigned char cr = 0;
-
-			if (pmode == 1) {
-				if (frame->curline % 32 == 0)
-					cb = 0, cg = cr = 0xFF;
-				else if (i % 32 == 0) {
-					if (frame->curline % 32 == 1)
-						num_cell++;
-					cb = 0, cg = cr = 0xFF;
-				} else {
-					cb = ((num_cell*7) + num_pass) & 0xFF;
-					cg = ((num_cell*5) + num_pass*2) & 0xFF;
-					cr = ((num_cell*3) + num_pass*3) & 0xFF;
-				}
-			} else {
-				/* Just the blue screen */
-			}
-
-			*f++ = cb;
-			*f++ = cg;
-			*f++ = cr;
-			scan_length += 3;
-		}
-	}
-
-	frame->frameState = FrameState_Done;
-	frame->seqRead_Length += scan_length;
-	++num_pass;
-
-	/* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
-	usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_TestPattern);
-
-
-#ifdef DEBUG
-/*
- * usbvideo_HexDump()
- *
- * A debugging tool. Prints hex dumps.
- *
- * History:
- * 29-Jul-2000 Added printing of offsets.
- */
-void usbvideo_HexDump(const unsigned char *data, int len)
-{
-	const int bytes_per_line = 32;
-	char tmp[128]; /* 32*3 + 5 */
-	int i, k;
-
-	for (i=k=0; len > 0; i++, len--) {
-		if (i > 0 && ((i % bytes_per_line) == 0)) {
-			printk("%s\n", tmp);
-			k=0;
-		}
-		if ((i % bytes_per_line) == 0)
-			k += sprintf(&tmp[k], "%04x: ", i);
-		k += sprintf(&tmp[k], "%02x ", data[i]);
-	}
-	if (k > 0)
-		printk("%s\n", tmp);
-}
-
-EXPORT_SYMBOL(usbvideo_HexDump);
-
-#endif
-
-/* ******************************************************************** */
-
-/* XXX: this piece of crap really wants some error handling.. */
-static int usbvideo_ClientIncModCount(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return -EINVAL;
-	}
-	if (uvd->handle == NULL) {
-		err("%s: uvd->handle == NULL", __func__);
-		return -EINVAL;
-	}
-	if (!try_module_get(uvd->handle->md_module)) {
-		err("%s: try_module_get() == 0", __func__);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static void usbvideo_ClientDecModCount(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return;
-	}
-	if (uvd->handle == NULL) {
-		err("%s: uvd->handle == NULL", __func__);
-		return;
-	}
-	if (uvd->handle->md_module == NULL) {
-		err("%s: uvd->handle->md_module == NULL", __func__);
-		return;
-	}
-	module_put(uvd->handle->md_module);
-}
-
-int usbvideo_register(
-	struct usbvideo **pCams,
-	const int num_cams,
-	const int num_extra,
-	const char *driverName,
-	const struct usbvideo_cb *cbTbl,
-	struct module *md,
-	const struct usb_device_id *id_table)
-{
-	struct usbvideo *cams;
-	int i, base_size, result;
-
-	/* Check parameters for sanity */
-	if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
-		err("%s: Illegal call", __func__);
-		return -EINVAL;
-	}
-
-	/* Check registration callback - must be set! */
-	if (cbTbl->probe == NULL) {
-		err("%s: probe() is required!", __func__);
-		return -EINVAL;
-	}
-
-	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
-	cams = kzalloc(base_size, GFP_KERNEL);
-	if (cams == NULL) {
-		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
-		return -ENOMEM;
-	}
-	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
-	    __func__, cams, base_size, num_cams);
-
-	/* Copy callbacks, apply defaults for those that are not set */
-	memmove(&cams->cb, cbTbl, sizeof(cams->cb));
-	if (cams->cb.getFrame == NULL)
-		cams->cb.getFrame = usbvideo_GetFrame;
-	if (cams->cb.disconnect == NULL)
-		cams->cb.disconnect = usbvideo_Disconnect;
-	if (cams->cb.startDataPump == NULL)
-		cams->cb.startDataPump = usbvideo_StartDataPump;
-	if (cams->cb.stopDataPump == NULL)
-		cams->cb.stopDataPump = usbvideo_StopDataPump;
-
-	cams->num_cameras = num_cams;
-	cams->cam = (struct uvd *) &cams[1];
-	cams->md_module = md;
-	mutex_init(&cams->lock);	/* to 1 == available */
-
-	for (i = 0; i < num_cams; i++) {
-		struct uvd *up = &cams->cam[i];
-
-		up->handle = cams;
-
-		/* Allocate user_data separately because of kmalloc's limits */
-		if (num_extra > 0) {
-			up->user_size = num_cams * num_extra;
-			up->user_data = kmalloc(up->user_size, GFP_KERNEL);
-			if (up->user_data == NULL) {
-				err("%s: Failed to allocate user_data (%d. bytes)",
-				    __func__, up->user_size);
-				while (i) {
-					up = &cams->cam[--i];
-					kfree(up->user_data);
-				}
-				kfree(cams);
-				return -ENOMEM;
-			}
-			dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
-			     __func__, i, up->user_data, up->user_size);
-		}
-	}
-
-	/*
-	 * Register ourselves with USB stack.
-	 */
-	strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
-	cams->usbdrv.name = cams->drvName;
-	cams->usbdrv.probe = cams->cb.probe;
-	cams->usbdrv.disconnect = cams->cb.disconnect;
-	cams->usbdrv.id_table = id_table;
-
-	/*
-	 * Update global handle to usbvideo. This is very important
-	 * because probe() can be called before usb_register() returns.
-	 * If the handle is not yet updated then the probe() will fail.
-	 */
-	*pCams = cams;
-	result = usb_register(&cams->usbdrv);
-	if (result) {
-		for (i = 0; i < num_cams; i++) {
-			struct uvd *up = &cams->cam[i];
-			kfree(up->user_data);
-		}
-		kfree(cams);
-	}
-
-	return result;
-}
-
-EXPORT_SYMBOL(usbvideo_register);
-
-/*
- * usbvideo_Deregister()
- *
- * Procedure frees all usbvideo and user data structures. Be warned that
- * if you had some dynamically allocated components in ->user field then
- * you should free them before calling here.
- */
-void usbvideo_Deregister(struct usbvideo **pCams)
-{
-	struct usbvideo *cams;
-	int i;
-
-	if (pCams == NULL) {
-		err("%s: pCams == NULL", __func__);
-		return;
-	}
-	cams = *pCams;
-	if (cams == NULL) {
-		err("%s: cams == NULL", __func__);
-		return;
-	}
-
-	dbg("%s: Deregistering %s driver.", __func__, cams->drvName);
-	usb_deregister(&cams->usbdrv);
-
-	dbg("%s: Deallocating cams=$%p (%d. cameras)", __func__, cams, cams->num_cameras);
-	for (i=0; i < cams->num_cameras; i++) {
-		struct uvd *up = &cams->cam[i];
-		int warning = 0;
-
-		if (up->user_data != NULL) {
-			if (up->user_size <= 0)
-				++warning;
-		} else {
-			if (up->user_size > 0)
-				++warning;
-		}
-		if (warning) {
-			err("%s: Warning: user_data=$%p user_size=%d.",
-			    __func__, up->user_data, up->user_size);
-		} else {
-			dbg("%s: Freeing %d. $%p->user_data=$%p",
-			    __func__, i, up, up->user_data);
-			kfree(up->user_data);
-		}
-	}
-	/* Whole array was allocated in one chunk */
-	dbg("%s: Freed %d uvd structures",
-	    __func__, cams->num_cameras);
-	kfree(cams);
-	*pCams = NULL;
-}
-
-EXPORT_SYMBOL(usbvideo_Deregister);
-
-/*
- * usbvideo_Disconnect()
- *
- * This procedure stops all driver activity. Deallocation of
- * the interface-private structure (pointed by 'ptr') is done now
- * (if we don't have any open files) or later, when those files
- * are closed. After that driver should be removable.
- *
- * This code handles surprise removal. The uvd->user is a counter which
- * increments on open() and decrements on close(). If we see here that
- * this counter is not 0 then we have a client who still has us opened.
- * We set uvd->remove_pending flag as early as possible, and after that
- * all access to the camera will gracefully fail. These failures should
- * prompt client to (eventually) close the video device, and then - in
- * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
- *
- * History:
- * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
- * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- * 19-Oct-2000 Moved to usbvideo module.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf)
-{
-	struct uvd *uvd = usb_get_intfdata (intf);
-	int i;
-
-	if (uvd == NULL) {
-		err("%s($%p): Illegal call.", __func__, intf);
-		return;
-	}
-
-	usb_set_intfdata (intf, NULL);
-
-	usbvideo_ClientIncModCount(uvd);
-	if (uvd->debug > 0)
-		dev_info(&intf->dev, "%s(%p.)\n", __func__, intf);
-
-	mutex_lock(&uvd->lock);
-	uvd->remove_pending = 1; /* Now all ISO data will be ignored */
-
-	/* At this time we ask to cancel outstanding URBs */
-	GET_CALLBACK(uvd, stopDataPump)(uvd);
-
-	for (i=0; i < USBVIDEO_NUMSBUF; i++)
-		usb_free_urb(uvd->sbuf[i].urb);
-
-	usb_put_dev(uvd->dev);
-	uvd->dev = NULL;    	    /* USB device is no more */
-
-	video_unregister_device(&uvd->vdev);
-	if (uvd->debug > 0)
-		dev_info(&intf->dev, "%s: Video unregistered.\n", __func__);
-
-	if (uvd->user)
-		dev_info(&intf->dev, "%s: In use, disconnect pending.\n",
-			 __func__);
-	else
-		usbvideo_CameraRelease(uvd);
-	mutex_unlock(&uvd->lock);
-	dev_info(&intf->dev, "USB camera disconnected.\n");
-
-	usbvideo_ClientDecModCount(uvd);
-}
-
-/*
- * usbvideo_CameraRelease()
- *
- * This code does final release of uvd. This happens
- * after the device is disconnected -and- all clients
- * closed their files.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static void usbvideo_CameraRelease(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: Illegal call", __func__);
-		return;
-	}
-
-	RingQueue_Free(&uvd->dp);
-	if (VALID_CALLBACK(uvd, userFree))
-		GET_CALLBACK(uvd, userFree)(uvd);
-	uvd->uvd_used = 0;	/* This is atomic, no need to take mutex */
-}
-
-/*
- * usbvideo_find_struct()
- *
- * This code searches the array of preallocated (static) structures
- * and returns index of the first one that isn't in use. Returns -1
- * if there are no free structures.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static int usbvideo_find_struct(struct usbvideo *cams)
-{
-	int u, rv = -1;
-
-	if (cams == NULL) {
-		err("No usbvideo handle?");
-		return -1;
-	}
-	mutex_lock(&cams->lock);
-	for (u = 0; u < cams->num_cameras; u++) {
-		struct uvd *uvd = &cams->cam[u];
-		if (!uvd->uvd_used) /* This one is free */
-		{
-			uvd->uvd_used = 1;	/* In use now */
-			mutex_init(&uvd->lock);	/* to 1 == available */
-			uvd->dev = NULL;
-			rv = u;
-			break;
-		}
-	}
-	mutex_unlock(&cams->lock);
-	return rv;
-}
-
-static const struct v4l2_file_operations usbvideo_fops = {
-	.owner =  THIS_MODULE,
-	.open =   usbvideo_v4l_open,
-	.release =usbvideo_v4l_close,
-	.read =   usbvideo_v4l_read,
-	.mmap =   usbvideo_v4l_mmap,
-	.ioctl =  usbvideo_v4l_ioctl,
-};
-static const struct video_device usbvideo_template = {
-	.fops =       &usbvideo_fops,
-};
-
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
-{
-	int i, devnum;
-	struct uvd *uvd = NULL;
-
-	if (cams == NULL) {
-		err("No usbvideo handle?");
-		return NULL;
-	}
-
-	devnum = usbvideo_find_struct(cams);
-	if (devnum == -1) {
-		err("IBM USB camera driver: Too many devices!");
-		return NULL;
-	}
-	uvd = &cams->cam[devnum];
-	dbg("Device entry #%d. at $%p", devnum, uvd);
-
-	/* Not relying upon caller we increase module counter ourselves */
-	usbvideo_ClientIncModCount(uvd);
-
-	mutex_lock(&uvd->lock);
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-		if (uvd->sbuf[i].urb == NULL) {
-			err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
-			uvd->uvd_used = 0;
-			uvd = NULL;
-			goto allocate_done;
-		}
-	}
-	uvd->user=0;
-	uvd->remove_pending = 0;
-	uvd->last_error = 0;
-	RingQueue_Initialize(&uvd->dp);
-
-	/* Initialize video device structure */
-	uvd->vdev = usbvideo_template;
-	sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
-	/*
-	 * The client is free to overwrite those because we
-	 * return control to the client's probe function right now.
-	 */
-allocate_done:
-	mutex_unlock(&uvd->lock);
-	usbvideo_ClientDecModCount(uvd);
-	return uvd;
-}
-
-EXPORT_SYMBOL(usbvideo_AllocateDevice);
-
-int usbvideo_RegisterVideoDevice(struct uvd *uvd)
-{
-	char tmp1[20], tmp2[20];	/* Buffers for printing */
-
-	if (uvd == NULL) {
-		err("%s: Illegal call.", __func__);
-		return -EINVAL;
-	}
-	if (uvd->video_endp == 0) {
-		dev_info(&uvd->dev->dev,
-			 "%s: No video endpoint specified; data pump disabled.\n",
-			 __func__);
-	}
-	if (uvd->paletteBits == 0) {
-		err("%s: No palettes specified!", __func__);
-		return -EINVAL;
-	}
-	if (uvd->defaultPalette == 0) {
-		dev_info(&uvd->dev->dev, "%s: No default palette!\n",
-			 __func__);
-	}
-
-	uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
-		VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
-	usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
-	usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
-
-	if (uvd->debug > 0) {
-		dev_info(&uvd->dev->dev,
-			 "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n",
-			 __func__, uvd->iface, uvd->video_endp,
-			 uvd->paletteBits);
-	}
-	if (uvd->dev == NULL) {
-		err("%s: uvd->dev == NULL", __func__);
-		return -EINVAL;
-	}
-	uvd->vdev.parent = &uvd->dev->dev;
-	uvd->vdev.release = video_device_release_empty;
-	if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		err("%s: video_register_device failed", __func__);
-		return -EPIPE;
-	}
-	if (uvd->debug > 1) {
-		dev_info(&uvd->dev->dev,
-			 "%s: video_register_device() successful\n", __func__);
-	}
-
-	dev_info(&uvd->dev->dev, "%s on %s: canvas=%s videosize=%s\n",
-		 (uvd->handle != NULL) ? uvd->handle->drvName : "???",
-		 video_device_node_name(&uvd->vdev), tmp2, tmp1);
-
-	usb_get_dev(uvd->dev);
-	return 0;
-}
-
-EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
-
-/* ******************************************************************** */
-
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct uvd *uvd = file->private_data;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	unsigned long page, pos;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return -EFAULT;
-
-	if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
-		return -EINVAL;
-
-	pos = (unsigned long) uvd->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	return 0;
-}
-
-/*
- * usbvideo_v4l_open()
- *
- * This is part of Video 4 Linux API. The driver can be opened by one
- * client only (checks internal counter 'uvdser'). The procedure
- * then allocates buffers needed for video processing.
- *
- * History:
- * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
- *             camera is also initialized here (once per connect), at
- *             expense of V4L client (it waits on open() call).
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- */
-static int usbvideo_v4l_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct uvd *uvd = (struct uvd *) dev;
-	const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
-	int i, errCode = 0;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
-	if (usbvideo_ClientIncModCount(uvd) < 0)
-		return -ENODEV;
-	mutex_lock(&uvd->lock);
-
-	if (uvd->user) {
-		err("%s: Someone tried to open an already opened device!", __func__);
-		errCode = -EBUSY;
-	} else {
-		/* Clear statistics */
-		memset(&uvd->stats, 0, sizeof(uvd->stats));
-
-		/* Clean pointers so we know if we allocated something */
-		for (i=0; i < USBVIDEO_NUMSBUF; i++)
-			uvd->sbuf[i].data = NULL;
-
-		/* Allocate memory for the frame buffers */
-		uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
-		uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
-		RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
-		if ((uvd->fbuf == NULL) ||
-		    (!RingQueue_IsAllocated(&uvd->dp))) {
-			err("%s: Failed to allocate fbuf or dp", __func__);
-			errCode = -ENOMEM;
-		} else {
-			/* Allocate all buffers */
-			for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
-				uvd->frame[i].frameState = FrameState_Unused;
-				uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
-				/*
-				 * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
-				 * is not used (using read() instead).
-				 */
-				uvd->frame[i].canvas = uvd->canvas;
-				uvd->frame[i].seqRead_Index = 0;
-			}
-			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-				uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
-				if (uvd->sbuf[i].data == NULL) {
-					errCode = -ENOMEM;
-					break;
-				}
-			}
-		}
-		if (errCode != 0) {
-			/* Have to free all that memory */
-			if (uvd->fbuf != NULL) {
-				usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
-				uvd->fbuf = NULL;
-			}
-			RingQueue_Free(&uvd->dp);
-			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-				kfree(uvd->sbuf[i].data);
-				uvd->sbuf[i].data = NULL;
-			}
-		}
-	}
-
-	/* If so far no errors then we shall start the camera */
-	if (errCode == 0) {
-		/* Start data pump if we have valid endpoint */
-		if (uvd->video_endp != 0)
-			errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
-		if (errCode == 0) {
-			if (VALID_CALLBACK(uvd, setupOnOpen)) {
-				if (uvd->debug > 1)
-					dev_info(&uvd->dev->dev,
-						 "%s: setupOnOpen callback\n",
-						 __func__);
-				errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
-				if (errCode < 0) {
-					err("%s: setupOnOpen callback failed (%d.).",
-					    __func__, errCode);
-				} else if (uvd->debug > 1) {
-					dev_info(&uvd->dev->dev,
-						 "%s: setupOnOpen callback successful\n",
-						 __func__);
-				}
-			}
-			if (errCode == 0) {
-				uvd->settingsAdjusted = 0;
-				if (uvd->debug > 1)
-					dev_info(&uvd->dev->dev,
-						 "%s: Open succeeded.\n",
-						 __func__);
-				uvd->user++;
-				file->private_data = uvd;
-			}
-		}
-	}
-	mutex_unlock(&uvd->lock);
-	if (errCode != 0)
-		usbvideo_ClientDecModCount(uvd);
-	if (uvd->debug > 0)
-		dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__,
-			 errCode);
-	return errCode;
-}
-
-/*
- * usbvideo_v4l_close()
- *
- * This is part of Video 4 Linux API. The procedure
- * stops streaming and deallocates all buffers that were earlier
- * allocated in usbvideo_v4l_open().
- *
- * History:
- * 22-Jan-2000 Moved scratch buffer deallocation here.
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
- */
-static int usbvideo_v4l_close(struct file *file)
-{
-	struct video_device *dev = file->private_data;
-	struct uvd *uvd = (struct uvd *) dev;
-	int i;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
-	mutex_lock(&uvd->lock);
-	GET_CALLBACK(uvd, stopDataPump)(uvd);
-	usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
-	uvd->fbuf = NULL;
-	RingQueue_Free(&uvd->dp);
-
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		kfree(uvd->sbuf[i].data);
-		uvd->sbuf[i].data = NULL;
-	}
-
-#if USBVIDEO_REPORT_STATS
-	usbvideo_ReportStatistics(uvd);
-#endif
-
-	uvd->user--;
-	if (uvd->remove_pending) {
-		if (uvd->debug > 0)
-			dev_info(&uvd->dev->dev, "%s: Final disconnect.\n",
-				 __func__);
-		usbvideo_CameraRelease(uvd);
-	}
-	mutex_unlock(&uvd->lock);
-	usbvideo_ClientDecModCount(uvd);
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__);
-	file->private_data = NULL;
-	return 0;
-}
-
-/*
- * usbvideo_v4l_ioctl()
- *
- * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
- *
- * History:
- * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
- */
-static long usbvideo_v4l_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct uvd *uvd = file->private_data;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return -EIO;
-
-	switch (cmd) {
-		case VIDIOCGCAP:
-		{
-			struct video_capability *b = arg;
-			*b = uvd->vcap;
-			return 0;
-		}
-		case VIDIOCGCHAN:
-		{
-			struct video_channel *v = arg;
-			*v = uvd->vchan;
-			return 0;
-		}
-		case VIDIOCSCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			return 0;
-		}
-		case VIDIOCGPICT:
-		{
-			struct video_picture *pic = arg;
-			*pic = uvd->vpic;
-			return 0;
-		}
-		case VIDIOCSPICT:
-		{
-			struct video_picture *pic = arg;
-			/*
-			 * Use temporary 'video_picture' structure to preserve our
-			 * own settings (such as color depth, palette) that we
-			 * aren't allowing everyone (V4L client) to change.
-			 */
-			uvd->vpic.brightness = pic->brightness;
-			uvd->vpic.hue = pic->hue;
-			uvd->vpic.colour = pic->colour;
-			uvd->vpic.contrast = pic->contrast;
-			uvd->settingsAdjusted = 0;	/* Will force new settings */
-			return 0;
-		}
-		case VIDIOCSWIN:
-		{
-			struct video_window *vw = arg;
-
-			if(VALID_CALLBACK(uvd, setVideoMode)) {
-				return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
-			}
-
-			if (vw->flags)
-				return -EINVAL;
-			if (vw->clipcount)
-				return -EINVAL;
-			if (vw->width != VIDEOSIZE_X(uvd->canvas))
-				return -EINVAL;
-			if (vw->height != VIDEOSIZE_Y(uvd->canvas))
-				return -EINVAL;
-
-			return 0;
-		}
-		case VIDIOCGWIN:
-		{
-			struct video_window *vw = arg;
-
-			vw->x = 0;
-			vw->y = 0;
-			vw->width = VIDEOSIZE_X(uvd->videosize);
-			vw->height = VIDEOSIZE_Y(uvd->videosize);
-			vw->chromakey = 0;
-			if (VALID_CALLBACK(uvd, getFPS))
-				vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
-			else
-				vw->flags = 10; /* FIXME: do better! */
-			return 0;
-		}
-		case VIDIOCGMBUF:
-		{
-			struct video_mbuf *vm = arg;
-			int i;
-
-			memset(vm, 0, sizeof(*vm));
-			vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
-			vm->frames = USBVIDEO_NUMFRAMES;
-			for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
-			  vm->offsets[i] = i * uvd->max_frame_size;
-
-			return 0;
-		}
-		case VIDIOCMCAPTURE:
-		{
-			struct video_mmap *vm = arg;
-
-			if (uvd->debug >= 1) {
-				dev_info(&uvd->dev->dev,
-					 "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n",
-					 vm->frame, vm->width, vm->height, vm->format);
-			}
-			/*
-			 * Check if the requested size is supported. If the requestor
-			 * requests too big a frame then we may be tricked into accessing
-			 * outside of own preallocated frame buffer (in uvd->frame).
-			 * This will cause oops or a security hole. Theoretically, we
-			 * could only clamp the size down to acceptable bounds, but then
-			 * we'd need to figure out how to insert our smaller buffer into
-			 * larger caller's buffer... this is not an easy question. So we
-			 * here just flatly reject too large requests, assuming that the
-			 * caller will resubmit with smaller size. Callers should know
-			 * what size we support (returned by VIDIOCGCAP). However vidcat,
-			 * for one, does not care and allows to ask for any size.
-			 */
-			if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
-			    (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
-				if (uvd->debug > 0) {
-					dev_info(&uvd->dev->dev,
-						 "VIDIOCMCAPTURE: Size=%dx%d "
-						 "too large; allowed only up "
-						 "to %ldx%ld\n", vm->width,
-						 vm->height,
-						 VIDEOSIZE_X(uvd->canvas),
-						 VIDEOSIZE_Y(uvd->canvas));
-				}
-				return -EINVAL;
-			}
-			/* Check if the palette is supported */
-			if (((1L << vm->format) & uvd->paletteBits) == 0) {
-				if (uvd->debug > 0) {
-					dev_info(&uvd->dev->dev,
-						 "VIDIOCMCAPTURE: format=%d. "
-						 "not supported "
-						 "(paletteBits=$%08lx)\n",
-						 vm->format, uvd->paletteBits);
-				}
-				return -EINVAL;
-			}
-			if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
-				err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
-				return -EINVAL;
-			}
-			if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
-				/* Not an error - can happen */
-			}
-			uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
-			uvd->frame[vm->frame].palette = vm->format;
-
-			/* Mark it as ready */
-			uvd->frame[vm->frame].frameState = FrameState_Ready;
-
-			return usbvideo_NewFrame(uvd, vm->frame);
-		}
-		case VIDIOCSYNC:
-		{
-			int *frameNum = arg;
-			int ret;
-
-			if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
-				return -EINVAL;
-
-			if (uvd->debug >= 1)
-				dev_info(&uvd->dev->dev,
-					 "VIDIOCSYNC: syncing to frame %d.\n",
-					 *frameNum);
-			if (uvd->flags & FLAGS_NO_DECODING)
-				ret = usbvideo_GetFrame(uvd, *frameNum);
-			else if (VALID_CALLBACK(uvd, getFrame)) {
-				ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
-				if ((ret < 0) && (uvd->debug >= 1)) {
-					err("VIDIOCSYNC: getFrame() returned %d.", ret);
-				}
-			} else {
-				err("VIDIOCSYNC: getFrame is not set");
-				ret = -EFAULT;
-			}
-
-			/*
-			 * The frame is in FrameState_Done_Hold state. Release it
-			 * right now because its data is already mapped into
-			 * the user space and it's up to the application to
-			 * make use of it until it asks for another frame.
-			 */
-			uvd->frame[*frameNum].frameState = FrameState_Unused;
-			return ret;
-		}
-		case VIDIOCGFBUF:
-		{
-			struct video_buffer *vb = arg;
-
-			memset(vb, 0, sizeof(*vb));
-			return 0;
-		}
-		case VIDIOCKEY:
-			return 0;
-
-		case VIDIOCCAPTURE:
-			return -EINVAL;
-
-		case VIDIOCSFBUF:
-
-		case VIDIOCGTUNER:
-		case VIDIOCSTUNER:
-
-		case VIDIOCGFREQ:
-		case VIDIOCSFREQ:
-
-		case VIDIOCGAUDIO:
-		case VIDIOCSAUDIO:
-			return -EINVAL;
-
-		default:
-			return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static long usbvideo_v4l_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, usbvideo_v4l_do_ioctl);
-}
-
-/*
- * usbvideo_v4l_read()
- *
- * This is mostly boring stuff. We simply ask for a frame and when it
- * arrives copy all the video data from it into user space. There is
- * no obvious need to override this method.
- *
- * History:
- * 20-Oct-2000 Created.
- * 01-Nov-2000 Added mutex (uvd->lock).
- */
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
-		      size_t count, loff_t *ppos)
-{
-	struct uvd *uvd = file->private_data;
-	int noblock = file->f_flags & O_NONBLOCK;
-	int frmx = -1, i;
-	struct usbvideo_frame *frame;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
-		return -EFAULT;
-
-	if (uvd->debug >= 1)
-		dev_info(&uvd->dev->dev,
-			 "%s: %Zd. bytes, noblock=%d.\n",
-			 __func__, count, noblock);
-
-	mutex_lock(&uvd->lock);
-
-	/* See if a frame is completed, then use it. */
-	for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
-		if ((uvd->frame[i].frameState == FrameState_Done) ||
-		    (uvd->frame[i].frameState == FrameState_Done_Hold) ||
-		    (uvd->frame[i].frameState == FrameState_Error)) {
-			frmx = i;
-			break;
-		}
-	}
-
-	/* FIXME: If we don't start a frame here then who ever does? */
-	if (noblock && (frmx == -1)) {
-		count = -EAGAIN;
-		goto read_done;
-	}
-
-	/*
-	 * If no FrameState_Done, look for a FrameState_Grabbing state.
-	 * See if a frame is in process (grabbing), then use it.
-	 * We will need to wait until it becomes cooked, of course.
-	 */
-	if (frmx == -1) {
-		for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
-			if (uvd->frame[i].frameState == FrameState_Grabbing) {
-				frmx = i;
-				break;
-			}
-		}
-	}
-
-	/*
-	 * If no frame is active, start one. We don't care which one
-	 * it will be, so #0 is as good as any.
-	 * In read access mode we don't have convenience of VIDIOCMCAPTURE
-	 * to specify the requested palette (video format) on per-frame
-	 * basis. This means that we have to return data in -some- format
-	 * and just hope that the client knows what to do with it.
-	 * The default format is configured in uvd->defaultPalette field
-	 * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
-	 * frame and initiate the frame filling process.
-	 */
-	if (frmx == -1) {
-		if (uvd->defaultPalette == 0) {
-			err("%s: No default palette; don't know what to do!", __func__);
-			count = -EFAULT;
-			goto read_done;
-		}
-		frmx = 0;
-		/*
-		 * We have no per-frame control over video size.
-		 * Therefore we only can use whatever size was
-		 * specified as default.
-		 */
-		uvd->frame[frmx].request = uvd->videosize;
-		uvd->frame[frmx].palette = uvd->defaultPalette;
-		uvd->frame[frmx].frameState = FrameState_Ready;
-		usbvideo_NewFrame(uvd, frmx);
-		/* Now frame 0 is supposed to start filling... */
-	}
-
-	/*
-	 * Get a pointer to the active frame. It is either previously
-	 * completed frame or frame in progress but not completed yet.
-	 */
-	frame = &uvd->frame[frmx];
-
-	/*
-	 * Sit back & wait until the frame gets filled and postprocessed.
-	 * If we fail to get the picture [in time] then return the error.
-	 * In this call we specify that we want the frame to be waited for,
-	 * postprocessed and switched into FrameState_Done_Hold state. This
-	 * state is used to hold the frame as "fully completed" between
-	 * subsequent partial reads of the same frame.
-	 */
-	if (frame->frameState != FrameState_Done_Hold) {
-		long rv = -EFAULT;
-		if (uvd->flags & FLAGS_NO_DECODING)
-			rv = usbvideo_GetFrame(uvd, frmx);
-		else if (VALID_CALLBACK(uvd, getFrame))
-			rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
-		else
-			err("getFrame is not set");
-		if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
-			count = rv;
-			goto read_done;
-		}
-	}
-
-	/*
-	 * Copy bytes to user space. We allow for partial reads, which
-	 * means that the user application can request read less than
-	 * the full frame size. It is up to the application to issue
-	 * subsequent calls until entire frame is read.
-	 *
-	 * First things first, make sure we don't copy more than we
-	 * have - even if the application wants more. That would be
-	 * a big security embarassment!
-	 */
-	if ((count + frame->seqRead_Index) > frame->seqRead_Length)
-		count = frame->seqRead_Length - frame->seqRead_Index;
-
-	/*
-	 * Copy requested amount of data to user space. We start
-	 * copying from the position where we last left it, which
-	 * will be zero for a new frame (not read before).
-	 */
-	if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
-		count = -EFAULT;
-		goto read_done;
-	}
-
-	/* Update last read position */
-	frame->seqRead_Index += count;
-	if (uvd->debug >= 1) {
-		err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
-			__func__, count, frame->seqRead_Index);
-	}
-
-	/* Finally check if the frame is done with and "release" it */
-	if (frame->seqRead_Index >= frame->seqRead_Length) {
-		/* All data has been read */
-		frame->seqRead_Index = 0;
-
-		/* Mark it as available to be used again. */
-		uvd->frame[frmx].frameState = FrameState_Unused;
-		if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
-			err("%s: usbvideo_NewFrame failed.", __func__);
-		}
-	}
-read_done:
-	mutex_unlock(&uvd->lock);
-	return count;
-}
-
-/*
- * Make all of the blocks of data contiguous
- */
-static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
-{
-	char *cdata;
-	int i, totlen = 0;
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		int n = urb->iso_frame_desc[i].actual_length;
-		int st = urb->iso_frame_desc[i].status;
-
-		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-
-		/* Detect and ignore errored packets */
-		if (st < 0) {
-			if (uvd->debug >= 1)
-				err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
-			uvd->stats.iso_err_count++;
-			continue;
-		}
-
-		/* Detect and ignore empty packets */
-		if (n <= 0) {
-			uvd->stats.iso_skip_count++;
-			continue;
-		}
-		totlen += n;	/* Little local accounting */
-		RingQueue_Enqueue(&uvd->dp, cdata, n);
-	}
-	return totlen;
-}
-
-static void usbvideo_IsocIrq(struct urb *urb)
-{
-	int i, ret, len;
-	struct uvd *uvd = urb->context;
-
-	/* We don't want to do anything if we are about to be removed! */
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-#if 0
-	if (urb->actual_length > 0) {
-		dev_info(&uvd->dev->dev,
-			 "urb=$%p status=%d. errcount=%d. length=%d.\n",
-			 urb, urb->status, urb->error_count,
-			 urb->actual_length);
-	} else {
-		static int c = 0;
-		if (c++ % 100 == 0)
-			dev_info(&uvd->dev->dev, "No Isoc data\n");
-	}
-#endif
-
-	if (!uvd->streaming) {
-		if (uvd->debug >= 1)
-			dev_info(&uvd->dev->dev,
-				 "Not streaming, but interrupt!\n");
-		return;
-	}
-
-	uvd->stats.urb_count++;
-	if (urb->actual_length <= 0)
-		goto urb_done_with;
-
-	/* Copy the data received into ring queue */
-	len = usbvideo_CompressIsochronous(uvd, urb);
-	uvd->stats.urb_length = len;
-	if (len <= 0)
-		goto urb_done_with;
-
-	/* Here we got some data */
-	uvd->stats.data_count += len;
-	RingQueue_WakeUpInterruptible(&uvd->dp);
-
-urb_done_with:
-	for (i = 0; i < FRAMES_PER_DESC; i++) {
-		urb->iso_frame_desc[i].status = 0;
-		urb->iso_frame_desc[i].actual_length = 0;
-	}
-	urb->status = 0;
-	urb->dev = uvd->dev;
-	ret = usb_submit_urb (urb, GFP_KERNEL);
-	if(ret)
-		err("usb_submit_urb error (%d)", ret);
-	return;
-}
-
-/*
- * usbvideo_StartDataPump()
- *
- * History:
- * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
- *             of hardcoded values. Simplified by using for loop,
- *             allowed any number of URBs.
- */
-static int usbvideo_StartDataPump(struct uvd *uvd)
-{
-	struct usb_device *dev = uvd->dev;
-	int i, errFlag;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
-	if (!CAMERA_IS_OPERATIONAL(uvd)) {
-		err("%s: Camera is not operational", __func__);
-		return -EFAULT;
-	}
-	uvd->curframe = -1;
-
-	/* Alternate interface 1 is is the biggest frame size */
-	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
-	if (i < 0) {
-		err("%s: usb_set_interface error", __func__);
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-	if (VALID_CALLBACK(uvd, videoStart))
-		GET_CALLBACK(uvd, videoStart)(uvd);
-	else
-		err("%s: videoStart not set", __func__);
-
-	/* We double buffer the Iso lists */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		int j, k;
-		struct urb *urb = uvd->sbuf[i].urb;
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = uvd->sbuf[i].data;
-		urb->complete = usbvideo_IsocIrq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
-		for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
-			urb->iso_frame_desc[j].offset = k;
-			urb->iso_frame_desc[j].length = uvd->iso_packet_len;
-		}
-	}
-
-	/* Submit all URBs */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
-		if (errFlag)
-			err("%s: usb_submit_isoc(%d) ret %d", __func__, i, errFlag);
-	}
-
-	uvd->streaming = 1;
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev,
-			 "%s: streaming=1 video_endp=$%02x\n", __func__,
-			 uvd->video_endp);
-	return 0;
-}
-
-/*
- * usbvideo_StopDataPump()
- *
- * This procedure stops streaming and deallocates URBs. Then it
- * activates zero-bandwidth alt. setting of the video interface.
- *
- * History:
- * 22-Jan-2000 Corrected order of actions to work after surprise removal.
- * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
- */
-static void usbvideo_StopDataPump(struct uvd *uvd)
-{
-	int i, j;
-
-	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
-		return;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
-	/* Unschedule all of the iso td's */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_kill_urb(uvd->sbuf[i].urb);
-	}
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__);
-	uvd->streaming = 0;
-
-	if (!uvd->remove_pending) {
-		/* Invoke minidriver's magic to stop the camera */
-		if (VALID_CALLBACK(uvd, videoStop))
-			GET_CALLBACK(uvd, videoStop)(uvd);
-		else
-			err("%s: videoStop not set", __func__);
-
-		/* Set packet size to 0 */
-		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
-		if (j < 0) {
-			err("%s: usb_set_interface() error %d.", __func__, j);
-			uvd->last_error = j;
-		}
-	}
-}
-
-/*
- * usbvideo_NewFrame()
- *
- * History:
- * 29-Mar-00 Added copying of previous frame into the current one.
- * 6-Aug-00  Added model 3 video sizes, removed redundant width, height.
- */
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
-{
-	struct usbvideo_frame *frame;
-	int n;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd,
-			 framenum);
-
-	/* If we're not grabbing a frame right now and the other frame is */
-	/*  ready to be grabbed into, then use it instead */
-	if (uvd->curframe != -1)
-		return 0;
-
-	/* If necessary we adjust picture settings between frames */
-	if (!uvd->settingsAdjusted) {
-		if (VALID_CALLBACK(uvd, adjustPicture))
-			GET_CALLBACK(uvd, adjustPicture)(uvd);
-		uvd->settingsAdjusted = 1;
-	}
-
-	n = (framenum + 1) % USBVIDEO_NUMFRAMES;
-	if (uvd->frame[n].frameState == FrameState_Ready)
-		framenum = n;
-
-	frame = &uvd->frame[framenum];
-
-	frame->frameState = FrameState_Grabbing;
-	frame->scanstate = ScanState_Scanning;
-	frame->seqRead_Length = 0;	/* Accumulated in xxx_parse_data() */
-	frame->deinterlace = Deinterlace_None;
-	frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
-	uvd->curframe = framenum;
-
-	/*
-	 * Normally we would want to copy previous frame into the current one
-	 * before we even start filling it with data; this allows us to stop
-	 * filling at any moment; top portion of the frame will be new and
-	 * bottom portion will stay as it was in previous frame. If we don't
-	 * do that then missing chunks of video stream will result in flickering
-	 * portions of old data whatever it was before.
-	 *
-	 * If we choose not to copy previous frame (to, for example, save few
-	 * bus cycles - the frame can be pretty large!) then we have an option
-	 * to clear the frame before using. If we experience losses in this
-	 * mode then missing picture will be black (no flickering).
-	 *
-	 * Finally, if user chooses not to clean the current frame before
-	 * filling it with data then the old data will be visible if we fail
-	 * to refill entire frame with new data.
-	 */
-	if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
-		/* This copies previous frame into this one to mask losses */
-		int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
-		memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
-	} else {
-		if (uvd->flags & FLAGS_CLEAN_FRAMES) {
-			/* This provides a "clean" frame but slows things down */
-			memset(frame->data, 0, uvd->max_frame_size);
-		}
-	}
-	return 0;
-}
-
-/*
- * usbvideo_CollectRawData()
- *
- * This procedure can be used instead of 'processData' callback if you
- * only want to dump the raw data from the camera into the output
- * device (frame buffer). You can look at it with V4L client, but the
- * image will be unwatchable. The main purpose of this code and of the
- * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
- * new, unknown cameras. This procedure will be automatically invoked
- * instead of the specified callback handler when uvd->flags has bit
- * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
- * based on usbvideo can use this feature at any time.
- */
-static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	int n;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-
-	/* Try to move data from queue into frame buffer */
-	n = RingQueue_GetLength(&uvd->dp);
-	if (n > 0) {
-		int m;
-		/* See how much space we have left */
-		m = uvd->max_frame_size - frame->seqRead_Length;
-		if (n > m)
-			n = m;
-		/* Now move that much data into frame buffer */
-		RingQueue_Dequeue(
-			&uvd->dp,
-			frame->data + frame->seqRead_Length,
-			m);
-		frame->seqRead_Length += m;
-	}
-	/* See if we filled the frame */
-	if (frame->seqRead_Length >= uvd->max_frame_size) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
-{
-	struct usbvideo_frame *frame = &uvd->frame[frameNum];
-
-	if (uvd->debug >= 2)
-		dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd,
-			 frameNum);
-
-	switch (frame->frameState) {
-	case FrameState_Unused:
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n",
-				 __func__);
-		return -EINVAL;
-	case FrameState_Ready:
-	case FrameState_Grabbing:
-	case FrameState_Error:
-	{
-		int ntries, signalPending;
-	redo:
-		if (!CAMERA_IS_OPERATIONAL(uvd)) {
-			if (uvd->debug >= 2)
-				dev_info(&uvd->dev->dev,
-					 "%s: Camera is not operational (1)\n",
-					 __func__);
-			return -EIO;
-		}
-		ntries = 0;
-		do {
-			RingQueue_InterruptibleSleepOn(&uvd->dp);
-			signalPending = signal_pending(current);
-			if (!CAMERA_IS_OPERATIONAL(uvd)) {
-				if (uvd->debug >= 2)
-					dev_info(&uvd->dev->dev,
-						 "%s: Camera is not "
-						 "operational (2)\n", __func__);
-				return -EIO;
-			}
-			assert(uvd->fbuf != NULL);
-			if (signalPending) {
-				if (uvd->debug >= 2)
-					dev_info(&uvd->dev->dev,
-					"%s: Signal=$%08x\n", __func__,
-					signalPending);
-				if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
-					usbvideo_TestPattern(uvd, 1, 0);
-					uvd->curframe = -1;
-					uvd->stats.frame_num++;
-					if (uvd->debug >= 2)
-						dev_info(&uvd->dev->dev,
-							 "%s: Forced test "
-							 "pattern screen\n",
-							 __func__);
-					return 0;
-				} else {
-					/* Standard answer: Interrupted! */
-					if (uvd->debug >= 2)
-						dev_info(&uvd->dev->dev,
-							 "%s: Interrupted!\n",
-							 __func__);
-					return -EINTR;
-				}
-			} else {
-				/* No signals - we just got new data in dp queue */
-				if (uvd->flags & FLAGS_NO_DECODING)
-					usbvideo_CollectRawData(uvd, frame);
-				else if (VALID_CALLBACK(uvd, processData))
-					GET_CALLBACK(uvd, processData)(uvd, frame);
-				else
-					err("%s: processData not set", __func__);
-			}
-		} while (frame->frameState == FrameState_Grabbing);
-		if (uvd->debug >= 2) {
-			dev_info(&uvd->dev->dev,
-				 "%s: Grabbing done; state=%d. (%lu. bytes)\n",
-				 __func__, frame->frameState,
-				 frame->seqRead_Length);
-		}
-		if (frame->frameState == FrameState_Error) {
-			int ret = usbvideo_NewFrame(uvd, frameNum);
-			if (ret < 0) {
-				err("%s: usbvideo_NewFrame() failed (%d.)", __func__, ret);
-				return ret;
-			}
-			goto redo;
-		}
-		/* Note that we fall through to meet our destiny below */
-	}
-	case FrameState_Done:
-		/*
-		 * Do all necessary postprocessing of data prepared in
-		 * "interrupt" code and the collecting code above. The
-		 * frame gets marked as FrameState_Done by queue parsing code.
-		 * This status means that we collected enough data and
-		 * most likely processed it as we went through. However
-		 * the data may need postprocessing, such as deinterlacing
-		 * or picture adjustments implemented in software (horror!)
-		 *
-		 * As soon as the frame becomes "final" it gets promoted to
-		 * FrameState_Done_Hold status where it will remain until the
-		 * caller consumed all the video data from the frame. Then
-		 * the empty shell of ex-frame is thrown out for dogs to eat.
-		 * But we, worried about pets, will recycle the frame!
-		 */
-		uvd->stats.frame_num++;
-		if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
-			if (VALID_CALLBACK(uvd, postProcess))
-				GET_CALLBACK(uvd, postProcess)(uvd, frame);
-			if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
-				usbvideo_SoftwareContrastAdjustment(uvd, frame);
-		}
-		frame->frameState = FrameState_Done_Hold;
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev,
-				 "%s: Entered FrameState_Done_Hold state.\n",
-				 __func__);
-		return 0;
-
-	case FrameState_Done_Hold:
-		/*
-		 * We stay in this state indefinitely until someone external,
-		 * like ioctl() or read() call finishes digesting the frame
-		 * data. Then it will mark the frame as FrameState_Unused and
-		 * it will be released back into the wild to roam freely.
-		 */
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev,
-				 "%s: FrameState_Done_Hold state.\n",
-				 __func__);
-		return 0;
-	}
-
-	/* Catch-all for other cases. We shall not be here. */
-	err("%s: Invalid state %d.", __func__, frame->frameState);
-	frame->frameState = FrameState_Unused;
-	return 0;
-}
-
-/*
- * usbvideo_DeinterlaceFrame()
- *
- * This procedure deinterlaces the given frame. Some cameras produce
- * only half of scanlines - sometimes only even lines, sometimes only
- * odd lines. The deinterlacing method is stored in frame->deinterlace
- * variable.
- *
- * Here we scan the frame vertically and replace missing scanlines with
- * average between surrounding ones - before and after. If we have no
- * line above then we just copy next line. Similarly, if we need to
- * create a last line then preceding line is used.
- */
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	if ((uvd == NULL) || (frame == NULL))
-		return;
-
-	if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
-	    (frame->deinterlace == Deinterlace_FillOddLines))
-	{
-		const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-		int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
-
-		for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
-			const unsigned char *fs1, *fs2;
-			unsigned char *fd;
-			int ip, in, j;	/* Previous and next lines */
-
-			/*
-			 * Need to average lines before and after 'i'.
-			 * If we go out of bounds seeking those lines then
-			 * we point back to existing line.
-			 */
-			ip = i - 1;	/* First, get rough numbers */
-			in = i + 1;
-
-			/* Now validate */
-			if (ip < 0)
-				ip = in;
-			if (in >= VIDEOSIZE_Y(frame->request))
-				in = ip;
-
-			/* Sanity check */
-			if ((ip < 0) || (in < 0) ||
-			    (ip >= VIDEOSIZE_Y(frame->request)) ||
-			    (in >= VIDEOSIZE_Y(frame->request)))
-			{
-				err("Error: ip=%d. in=%d. req.height=%ld.",
-				    ip, in, VIDEOSIZE_Y(frame->request));
-				break;
-			}
-
-			/* Now we need to average lines 'ip' and 'in' to produce line 'i' */
-			fs1 = frame->data + (v4l_linesize * ip);
-			fs2 = frame->data + (v4l_linesize * in);
-			fd = frame->data + (v4l_linesize * i);
-
-			/* Average lines around destination */
-			for (j=0; j < v4l_linesize; j++) {
-				fd[j] = (unsigned char)((((unsigned) fs1[j]) +
-							 ((unsigned)fs2[j])) >> 1);
-			}
-		}
-	}
-
-	/* Optionally display statistics on the screen */
-	if (uvd->flags & FLAGS_OVERLAY_STATS)
-		usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
-
-/*
- * usbvideo_SoftwareContrastAdjustment()
- *
- * This code adjusts the contrast of the frame, assuming RGB24 format.
- * As most software image processing, this job is CPU-intensive.
- * Get a camera that supports hardware adjustment!
- *
- * History:
- * 09-Feb-2001  Created.
- */
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
-						struct usbvideo_frame *frame)
-{
-	int i, j, v4l_linesize;
-	signed long adj;
-	const int ccm = 128; /* Color correction median - see below */
-
-	if ((uvd == NULL) || (frame == NULL)) {
-		err("%s: Illegal call.", __func__);
-		return;
-	}
-	adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
-	if (adj == 0) {
-		/* In rare case of no adjustment */
-		return;
-	}
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-	for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
-		unsigned char *fd = frame->data + (v4l_linesize * i);
-		for (j=0; j < v4l_linesize; j++) {
-			signed long v = (signed long) fd[j];
-			/* Magnify up to 2 times, reduce down to zero */
-			v = 128 + ((ccm + adj) * (v - 128)) / ccm;
-			RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
-			fd[j] = (unsigned char) v;
-		}
-	}
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
deleted file mode 100644
index c66985beb8c9..000000000000
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef usbvideo_h
-#define	usbvideo_h
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/* Most helpful debugging aid */
-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
-
-#define USBVIDEO_REPORT_STATS	1	/* Set to 0 to block statistics on close */
-
-/* Bit flags (options) */
-#define FLAGS_RETRY_VIDIOCSYNC		(1 << 0)
-#define	FLAGS_MONOCHROME		(1 << 1)
-#define FLAGS_DISPLAY_HINTS		(1 << 2)
-#define FLAGS_OVERLAY_STATS		(1 << 3)
-#define FLAGS_FORCE_TESTPATTERN		(1 << 4)
-#define FLAGS_SEPARATE_FRAMES		(1 << 5)
-#define FLAGS_CLEAN_FRAMES		(1 << 6)
-#define	FLAGS_NO_DECODING		(1 << 7)
-
-/* Bit flags for frames (apply to the frame where they are specified) */
-#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST	(1 << 0)
-
-/* Camera capabilities (maximum) */
-#define CAMERA_URB_FRAMES       32
-#define CAMERA_MAX_ISO_PACKET   1023 /* 1022 actually sent by camera */
-#define FRAMES_PER_DESC		(CAMERA_URB_FRAMES)
-#define FRAME_SIZE_PER_DESC	(CAMERA_MAX_ISO_PACKET)
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
-
-#define V4L_BYTES_PER_PIXEL     3	/* Because we produce RGB24 */
-
-/*
- * Use this macro to construct constants for different video sizes.
- * We have to deal with different video sizes that have to be
- * configured in the device or compared against when we receive
- * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y
- * #defines and that's the end of story. However this solution
- * does not allow to convert between real pixel sizes and the
- * constant (integer) value that may be used to tag a frame or
- * whatever. The set of macros below constructs videosize constants
- * from the pixel size and allows to reconstruct the pixel size
- * from the combined value later.
- */
-#define	VIDEOSIZE(x,y)	(((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16))
-#define	VIDEOSIZE_X(vs)	((vs) & 0xFFFFL)
-#define	VIDEOSIZE_Y(vs)	(((vs) >> 16) & 0xFFFFL)
-typedef unsigned long videosize_t;
-
-/*
- * This macro checks if the camera is still operational. The 'uvd'
- * pointer must be valid, uvd->dev must be valid, we are not
- * removing the device and the device has not erred on us.
- */
-#define CAMERA_IS_OPERATIONAL(uvd) (\
-	(uvd != NULL) && \
-	((uvd)->dev != NULL) && \
-	((uvd)->last_error == 0) && \
-	(!(uvd)->remove_pending))
-
-/*
- * We use macros to do YUV -> RGB conversion because this is
- * very important for speed and totally unimportant for size.
- *
- * YUV -> RGB Conversion
- * ---------------------
- *
- * B = 1.164*(Y-16)		    + 2.018*(V-128)
- * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
- * R = 1.164*(Y-16) + 1.596*(U-128)
- *
- * If you fancy integer arithmetics (as you should), hear this:
- *
- * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
- * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
- * 65536*R = 76284*(Y-16) + 104595*(U-128)
- *
- * Make sure the output values are within [0..255] range.
- */
-#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
-    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
-    mm_y = (my) - 16;  \
-    mm_u = (mu) - 128; \
-    mm_v = (mv) - 128; \
-    mm_yc= mm_y * 76284; \
-    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
-    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
-    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
-    mb = LIMIT_RGB(mm_b); \
-    mg = LIMIT_RGB(mm_g); \
-    mr = LIMIT_RGB(mm_r); \
-}
-
-#define	RING_QUEUE_SIZE		(128*1024)	/* Must be a power of 2 */
-#define	RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1)
-#define	RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n)
-#define	RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)])
-
-struct RingQueue {
-	unsigned char *queue;	/* Data from the Isoc data pump */
-	int length;		/* How many bytes allocated for the queue */
-	int wi;			/* That's where we write */
-	int ri;			/* Read from here until you hit write index */
-	wait_queue_head_t wqh;	/* Processes waiting */
-};
-
-enum ScanState {
-	ScanState_Scanning,	/* Scanning for header */
-	ScanState_Lines		/* Parsing lines */
-};
-
-/* Completion states of the data parser */
-enum ParseState {
-	scan_Continue,		/* Just parse next item */
-	scan_NextFrame,		/* Frame done, send it to V4L */
-	scan_Out,		/* Not enough data for frame */
-	scan_EndParse		/* End parsing */
-};
-
-enum FrameState {
-	FrameState_Unused,	/* Unused (no MCAPTURE) */
-	FrameState_Ready,	/* Ready to start grabbing */
-	FrameState_Grabbing,	/* In the process of being grabbed into */
-	FrameState_Done,	/* Finished grabbing, but not been synced yet */
-	FrameState_Done_Hold,	/* Are syncing or reading */
-	FrameState_Error,	/* Something bad happened while processing */
-};
-
-/*
- * Some frames may contain only even or odd lines. This type
- * specifies what type of deinterlacing is required.
- */
-enum Deinterlace {
-	Deinterlace_None=0,
-	Deinterlace_FillOddLines,
-	Deinterlace_FillEvenLines
-};
-
-#define USBVIDEO_NUMFRAMES	2	/* How many frames we work with */
-#define USBVIDEO_NUMSBUF	2	/* How many URBs linked in a ring */
-
-/* This structure represents one Isoc request - URB and buffer */
-struct usbvideo_sbuf {
-	char *data;
-	struct urb *urb;
-};
-
-struct usbvideo_frame {
-	char *data;		/* Frame buffer */
-	unsigned long header;	/* Significant bits from the header */
-
-	videosize_t canvas;	/* The canvas (max. image) allocated */
-	videosize_t request;	/* That's what the application asked for */
-	unsigned short palette;	/* The desired format */
-
-	enum FrameState frameState;/* State of grabbing */
-	enum ScanState scanstate;	/* State of scanning */
-	enum Deinterlace deinterlace;
-	int flags;		/* USBVIDEO_FRAME_FLAG_xxx bit flags */
-
-	int curline;		/* Line of frame we're working on */
-
-	long seqRead_Length;	/* Raw data length of frame */
-	long seqRead_Index;	/* Amount of data that has been already read */
-
-	void *user;		/* Additional data that user may need */
-};
-
-/* Statistics that can be overlaid on screen */
-struct usbvideo_statistics {
-	unsigned long frame_num;	/* Sequential number of the frame */
-	unsigned long urb_count;        /* How many URBs we received so far */
-	unsigned long urb_length;       /* Length of last URB */
-	unsigned long data_count;       /* How many bytes we received */
-	unsigned long header_count;     /* How many frame headers we found */
-	unsigned long iso_skip_count;	/* How many empty ISO packets received */
-	unsigned long iso_err_count;	/* How many bad ISO packets received */
-};
-
-struct usbvideo;
-
-struct uvd {
-	struct video_device vdev;	/* Must be the first field! */
-	struct usb_device *dev;
-	struct usbvideo *handle;	/* Points back to the struct usbvideo */
-	void *user_data;		/* Camera-dependent data */
-	int user_size;			/* Size of that camera-dependent data */
-	int debug;			/* Debug level for usbvideo */
-	unsigned char iface;		/* Video interface number */
-	unsigned char video_endp;
-	unsigned char ifaceAltActive;
-	unsigned char ifaceAltInactive; /* Alt settings */
-	unsigned long flags;		/* FLAGS_USBVIDEO_xxx */
-	unsigned long paletteBits;	/* Which palettes we accept? */
-	unsigned short defaultPalette;	/* What palette to use for read() */
-	struct mutex lock;
-	int user;		/* user count for exclusive use */
-
-	videosize_t videosize;	/* Current setting */
-	videosize_t canvas;	/* This is the width,height of the V4L canvas */
-	int max_frame_size;	/* Bytes in one video frame */
-
-	int uvd_used;        	/* Is this structure in use? */
-	int streaming;		/* Are we streaming Isochronous? */
-	int grabbing;		/* Are we grabbing? */
-	int settingsAdjusted;	/* Have we adjusted contrast etc.? */
-	int last_error;		/* What calamity struck us? */
-
-	char *fbuf;		/* Videodev buffer area */
-	int fbuf_size;		/* Videodev buffer size */
-
-	int curframe;
-	int iso_packet_len;	/* Videomode-dependent, saves bus bandwidth */
-
-	struct RingQueue dp;	/* Isoc data pump */
-	struct usbvideo_frame frame[USBVIDEO_NUMFRAMES];
-	struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF];
-
-	volatile int remove_pending;	/* If set then about to exit */
-
-	struct video_picture vpic, vpic_old;	/* Picture settings */
-	struct video_capability vcap;		/* Video capabilities */
-	struct video_channel vchan;	/* May be used for tuner support */
-	struct usbvideo_statistics stats;
-	char videoName[32];		/* Holds name like "video7" */
-};
-
-/*
- * usbvideo callbacks (virtual methods). They are set when usbvideo
- * services are registered. All of these default to NULL, except those
- * that default to usbvideo-provided methods.
- */
-struct usbvideo_cb {
-	int (*probe)(struct usb_interface *, const struct usb_device_id *);
-	void (*userFree)(struct uvd *);
-	void (*disconnect)(struct usb_interface *);
-	int (*setupOnOpen)(struct uvd *);
-	void (*videoStart)(struct uvd *);
-	void (*videoStop)(struct uvd *);
-	void (*processData)(struct uvd *, struct usbvideo_frame *);
-	void (*postProcess)(struct uvd *, struct usbvideo_frame *);
-	void (*adjustPicture)(struct uvd *);
-	int (*getFPS)(struct uvd *);
-	int (*overlayHook)(struct uvd *, struct usbvideo_frame *);
-	int (*getFrame)(struct uvd *, int);
-	int (*startDataPump)(struct uvd *uvd);
-	void (*stopDataPump)(struct uvd *uvd);
-	int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
-};
-
-struct usbvideo {
-	int num_cameras;		/* As allocated */
-	struct usb_driver usbdrv;	/* Interface to the USB stack */
-	char drvName[80];		/* Driver name */
-	struct mutex lock;		/* Mutex protecting camera structures */
-	struct usbvideo_cb cb;		/* Table of callbacks (virtual methods) */
-	struct video_device vdt;	/* Video device template */
-	struct uvd *cam;			/* Array of camera structures */
-	struct module *md_module;	/* Minidriver module */
-};
-
-
-/*
- * This macro retrieves callback address from the struct uvd object.
- * No validity checks are done here, so be sure to check the
- * callback beforehand with VALID_CALLBACK.
- */
-#define	GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName)
-
-/*
- * This macro returns either callback pointer or NULL. This is safe
- * macro, meaning that most of components of data structures involved
- * may be NULL - this only results in NULL being returned. You may
- * wish to use this macro to make sure that the callback is callable.
- * However keep in mind that those checks take time.
- */
-#define	VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \
-		((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL)
-
-int  RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len);
-int  RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n);
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq);
-void RingQueue_Flush(struct RingQueue *rq);
-
-static inline int RingQueue_GetLength(const struct RingQueue *rq)
-{
-	return (rq->wi - rq->ri + rq->length) & (rq->length-1);
-}
-
-static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq)
-{
-	return rq->length - RingQueue_GetLength(rq);
-}
-
-void usbvideo_DrawLine(
-	struct usbvideo_frame *frame,
-	int x1, int y1,
-	int x2, int y2,
-	unsigned char cr, unsigned char cg, unsigned char cb);
-void usbvideo_HexDump(const unsigned char *data, int len);
-void usbvideo_SayAndWait(const char *what);
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
-
-/* Memory allocation routines */
-unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
-
-int usbvideo_register(
-	struct usbvideo **pCams,
-	const int num_cams,
-	const int num_extra,
-	const char *driverName,
-	const struct usbvideo_cb *cbTable,
-	struct module *md,
-	const struct usb_device_id *id_table);
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
-int usbvideo_RegisterVideoDevice(struct uvd *uvd);
-void usbvideo_Deregister(struct usbvideo **uvt);
-
-int usbvideo_v4l_initialize(struct video_device *dev);
-
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame);
-
-/*
- * This code performs bounds checking - use it when working with
- * new formats, or else you may get oopses all over the place.
- * If pixel falls out of bounds then it gets shoved back (as close
- * to place of offence as possible) and is painted bright red.
- *
- * There are two important concepts: frame width, height and
- * V4L canvas width, height. The former is the area requested by
- * the application -for this very frame-. The latter is the largest
- * possible frame that we can serve (we advertise that via V4L ioctl).
- * The frame data is expected to be formatted as lines of length
- * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines.
- */
-static inline void RGB24_PUTPIXEL(
-	struct usbvideo_frame *fr,
-	int ix, int iy,
-	unsigned char vr,
-	unsigned char vg,
-	unsigned char vb)
-{
-	register unsigned char *pf;
-	int limiter = 0, mx, my;
-	mx = ix;
-	my = iy;
-	if (mx < 0) {
-		mx=0;
-		limiter++;
-	} else if (mx >= VIDEOSIZE_X((fr)->request)) {
-		mx= VIDEOSIZE_X((fr)->request) - 1;
-		limiter++;
-	}
-	if (my < 0) {
-		my = 0;
-		limiter++;
-	} else if (my >= VIDEOSIZE_Y((fr)->request)) {
-		my = VIDEOSIZE_Y((fr)->request) - 1;
-		limiter++;
-	}
-	pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix));
-	if (limiter) {
-		*pf++ = 0;
-		*pf++ = 0;
-		*pf++ = 0xFF;
-	} else {
-		*pf++ = (vb);
-		*pf++ = (vg);
-		*pf++ = (vr);
-	}
-}
-
-#endif /* usbvideo_h */
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
deleted file mode 100644
index dc17cce2fbb6..000000000000
--- a/drivers/media/video/usbvideo/vicam.c
+++ /dev/null
@@ -1,952 +0,0 @@
-/*
- * USB ViCam WebCam driver
- * Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
- *                    Christopher L Cheney (ccheney@cheney.cx),
- *                    Pavel Machek (pavel@ucw.cz),
- *                    John Tyner (jtyner@cs.ucr.edu),
- *                    Monroe Williams (monroe@pobox.com)
- *
- * Supports 3COM HomeConnect PC Digital WebCam
- * Supports Compro PS39U WebCam
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * This source code is based heavily on the CPiA webcam driver which was
- * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt
- *
- * Portions of this code were also copied from usbvideo.c
- *
- * Special thanks to the whole team at Sourceforge for help making
- * this driver become a reality.  Notably:
- * Andy Armstrong who reverse engineered the color encoding and
- * Pavel Machek and Chris Cheney who worked on reverse engineering the
- *    camera controls and wrote the first generation driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <linux/usb.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
-#include "usbvideo.h"
-
-// #define VICAM_DEBUG
-
-#ifdef VICAM_DEBUG
-#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __func__, lineno, ##args)
-#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args)
-#else
-#define DBG(fmn,args...) do {} while(0)
-#endif
-
-#define DRIVER_AUTHOR           "Joe Burks, jburks@wavicle.org"
-#define DRIVER_DESC             "ViCam WebCam Driver"
-
-/* Define these values to match your device */
-#define USB_VICAM_VENDOR_ID	0x04c1
-#define USB_VICAM_PRODUCT_ID	0x009d
-#define USB_COMPRO_VENDOR_ID	0x0602
-#define USB_COMPRO_PRODUCT_ID	0x1001
-
-#define VICAM_BYTES_PER_PIXEL   3
-#define VICAM_MAX_READ_SIZE     (512*242+128)
-#define VICAM_MAX_FRAME_SIZE    (VICAM_BYTES_PER_PIXEL*320*240)
-#define VICAM_FRAMES            2
-
-#define VICAM_HEADER_SIZE       64
-
-/* rvmalloc / rvfree copied from usbvideo.c
- *
- * Not sure why these are not yet non-statics which I can reference through
- * usbvideo.h the same as it is in 2.4.20.  I bet this will get fixed sometime
- * in the future.
- *
-*/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-struct vicam_camera {
-	u16 shutter_speed;	// capture shutter speed
-	u16 gain;		// capture gain
-
-	u8 *raw_image;		// raw data captured from the camera
-	u8 *framebuf;		// processed data in RGB24 format
-	u8 *cntrlbuf;		// area used to send control msgs
-
-	struct video_device vdev;	// v4l video device
-	struct usb_device *udev;	// usb device
-
-	/* guard against simultaneous accesses to the camera */
-	struct mutex cam_lock;
-
-	int is_initialized;
-	u8 open_count;
-	u8 bulkEndpoint;
-	int needsDummyRead;
-};
-
-static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
-static void vicam_disconnect(struct usb_interface *intf);
-static void read_frame(struct vicam_camera *cam, int framenum);
-static void vicam_decode_color(const u8 *, u8 *);
-
-static int __send_control_msg(struct vicam_camera *cam,
-			      u8 request,
-			      u16 value,
-			      u16 index,
-			      unsigned char *cp,
-			      u16 size)
-{
-	int status;
-
-	/* cp must be memory that has been allocated by kmalloc */
-
-	status = usb_control_msg(cam->udev,
-				 usb_sndctrlpipe(cam->udev, 0),
-				 request,
-				 USB_DIR_OUT | USB_TYPE_VENDOR |
-				 USB_RECIP_DEVICE, value, index,
-				 cp, size, 1000);
-
-	status = min(status, 0);
-
-	if (status < 0) {
-		printk(KERN_INFO "Failed sending control message, error %d.\n",
-		       status);
-	}
-
-	return status;
-}
-
-static int send_control_msg(struct vicam_camera *cam,
-			    u8 request,
-			    u16 value,
-			    u16 index,
-			    unsigned char *cp,
-			    u16 size)
-{
-	int status = -ENODEV;
-	mutex_lock(&cam->cam_lock);
-	if (cam->udev) {
-		status = __send_control_msg(cam, request, value,
-					    index, cp, size);
-	}
-	mutex_unlock(&cam->cam_lock);
-	return status;
-}
-static int
-initialize_camera(struct vicam_camera *cam)
-{
-	int err;
-	const struct ihex_binrec *rec;
-	const struct firmware *uninitialized_var(fw);
-
-	err = request_ihex_firmware(&fw, "vicam/firmware.fw", &cam->udev->dev);
-	if (err) {
-		printk(KERN_ERR "Failed to load \"vicam/firmware.fw\": %d\n",
-		       err);
-		return err;
-	}
-
-	for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
-		memcpy(cam->cntrlbuf, rec->data, be16_to_cpu(rec->len));
-
-		err = send_control_msg(cam, 0xff, 0, 0,
-				       cam->cntrlbuf, be16_to_cpu(rec->len));
-		if (err)
-			break;
-	}
-
-	release_firmware(fw);
-
-	return err;
-}
-
-static int
-set_camera_power(struct vicam_camera *cam, int state)
-{
-	int status;
-
-	if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0)
-		return status;
-
-	if (state) {
-		send_control_msg(cam, 0x55, 1, 0, NULL, 0);
-	}
-
-	return 0;
-}
-
-static long
-vicam_ioctl(struct file *file, unsigned int ioctlnr, unsigned long arg)
-{
-	void __user *user_arg = (void __user *)arg;
-	struct vicam_camera *cam = file->private_data;
-	long retval = 0;
-
-	if (!cam)
-		return -ENODEV;
-
-	switch (ioctlnr) {
-		/* query capabilities */
-	case VIDIOCGCAP:
-		{
-			struct video_capability b;
-
-			DBG("VIDIOCGCAP\n");
-			memset(&b, 0, sizeof(b));
-			strcpy(b.name, "ViCam-based Camera");
-			b.type = VID_TYPE_CAPTURE;
-			b.channels = 1;
-			b.audios = 0;
-			b.maxwidth = 320;	/* VIDEOSIZE_CIF */
-			b.maxheight = 240;
-			b.minwidth = 320;	/* VIDEOSIZE_48_48 */
-			b.minheight = 240;
-
-			if (copy_to_user(user_arg, &b, sizeof(b)))
-				retval = -EFAULT;
-
-			break;
-		}
-		/* get/set video source - we are a camera and nothing else */
-	case VIDIOCGCHAN:
-		{
-			struct video_channel v;
-
-			DBG("VIDIOCGCHAN\n");
-			if (copy_from_user(&v, user_arg, sizeof(v))) {
-				retval = -EFAULT;
-				break;
-			}
-			if (v.channel != 0) {
-				retval = -EINVAL;
-				break;
-			}
-
-			v.channel = 0;
-			strcpy(v.name, "Camera");
-			v.tuners = 0;
-			v.flags = 0;
-			v.type = VIDEO_TYPE_CAMERA;
-			v.norm = 0;
-
-			if (copy_to_user(user_arg, &v, sizeof(v)))
-				retval = -EFAULT;
-			break;
-		}
-
-	case VIDIOCSCHAN:
-		{
-			int v;
-
-			if (copy_from_user(&v, user_arg, sizeof(v)))
-				retval = -EFAULT;
-			DBG("VIDIOCSCHAN %d\n", v);
-
-			if (retval == 0 && v != 0)
-				retval = -EINVAL;
-
-			break;
-		}
-
-		/* image properties */
-	case VIDIOCGPICT:
-		{
-			struct video_picture vp;
-			DBG("VIDIOCGPICT\n");
-			memset(&vp, 0, sizeof (struct video_picture));
-			vp.brightness = cam->gain << 8;
-			vp.depth = 24;
-			vp.palette = VIDEO_PALETTE_RGB24;
-			if (copy_to_user(user_arg, &vp, sizeof (struct video_picture)))
-				retval = -EFAULT;
-			break;
-		}
-
-	case VIDIOCSPICT:
-		{
-			struct video_picture vp;
-
-			if (copy_from_user(&vp, user_arg, sizeof(vp))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
-			    vp.palette);
-
-			cam->gain = vp.brightness >> 8;
-
-			if (vp.depth != 24
-			    || vp.palette != VIDEO_PALETTE_RGB24)
-				retval = -EINVAL;
-
-			break;
-		}
-
-		/* get/set capture window */
-	case VIDIOCGWIN:
-		{
-			struct video_window vw;
-			vw.x = 0;
-			vw.y = 0;
-			vw.width = 320;
-			vw.height = 240;
-			vw.chromakey = 0;
-			vw.flags = 0;
-			vw.clips = NULL;
-			vw.clipcount = 0;
-
-			DBG("VIDIOCGWIN\n");
-
-			if (copy_to_user(user_arg, (void *)&vw, sizeof(vw)))
-				retval = -EFAULT;
-
-			// I'm not sure what the deal with a capture window is, it is very poorly described
-			// in the doc.  So I won't support it now.
-			break;
-		}
-
-	case VIDIOCSWIN:
-		{
-
-			struct video_window vw;
-
-			if (copy_from_user(&vw, user_arg, sizeof(vw))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
-
-			if ( vw.width != 320 || vw.height != 240 )
-				retval = -EFAULT;
-
-			break;
-		}
-
-		/* mmap interface */
-	case VIDIOCGMBUF:
-		{
-			struct video_mbuf vm;
-			int i;
-
-			DBG("VIDIOCGMBUF\n");
-			memset(&vm, 0, sizeof (vm));
-			vm.size =
-			    VICAM_MAX_FRAME_SIZE * VICAM_FRAMES;
-			vm.frames = VICAM_FRAMES;
-			for (i = 0; i < VICAM_FRAMES; i++)
-				vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i;
-
-			if (copy_to_user(user_arg, (void *)&vm, sizeof(vm)))
-				retval = -EFAULT;
-
-			break;
-		}
-
-	case VIDIOCMCAPTURE:
-		{
-			struct video_mmap vm;
-			// int video_size;
-
-			if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format);
-
-			if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 )
-				retval = -EINVAL;
-
-			// in theory right here we'd start the image capturing
-			// (fill in a bulk urb and submit it asynchronously)
-			//
-			// Instead we're going to do a total hack job for now and
-			// retrieve the frame in VIDIOCSYNC
-
-			break;
-		}
-
-	case VIDIOCSYNC:
-		{
-			int frame;
-
-			if (copy_from_user((void *)&frame, user_arg, sizeof(int))) {
-				retval = -EFAULT;
-				break;
-			}
-			DBG("VIDIOCSYNC: %d\n", frame);
-
-			read_frame(cam, frame);
-			vicam_decode_color(cam->raw_image,
-					   cam->framebuf +
-					   frame * VICAM_MAX_FRAME_SIZE );
-
-			break;
-		}
-
-		/* pointless to implement overlay with this camera */
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCKEY:
-		retval = -EINVAL;
-		break;
-
-		/* tuner interface - we have none */
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-		retval = -EINVAL;
-		break;
-
-		/* audio interface - we have none */
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		retval = -EINVAL;
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-		break;
-	}
-
-	return retval;
-}
-
-static int
-vicam_open(struct file *file)
-{
-	struct vicam_camera *cam = video_drvdata(file);
-
-	DBG("open\n");
-
-	if (!cam) {
-		printk(KERN_ERR
-		       "vicam video_device improperly initialized");
-		return -EINVAL;
-	}
-
-	/* cam_lock/open_count protects us from simultaneous opens
-	 * ... for now. we probably shouldn't rely on this fact forever.
-	 */
-
-	mutex_lock(&cam->cam_lock);
-	if (cam->open_count > 0) {
-		printk(KERN_INFO
-		       "vicam_open called on already opened camera");
-		mutex_unlock(&cam->cam_lock);
-		return -EBUSY;
-	}
-
-	cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
-	if (!cam->raw_image) {
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-	if (!cam->framebuf) {
-		kfree(cam->raw_image);
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!cam->cntrlbuf) {
-		kfree(cam->raw_image);
-		rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->needsDummyRead = 1;
-	cam->open_count++;
-
-	file->private_data = cam;
-	mutex_unlock(&cam->cam_lock);
-
-
-	// First upload firmware, then turn the camera on
-
-	if (!cam->is_initialized) {
-		initialize_camera(cam);
-
-		cam->is_initialized = 1;
-	}
-
-	set_camera_power(cam, 1);
-
-	return 0;
-}
-
-static int
-vicam_close(struct file *file)
-{
-	struct vicam_camera *cam = file->private_data;
-	int open_count;
-	struct usb_device *udev;
-
-	DBG("close\n");
-
-	/* it's not the end of the world if
-	 * we fail to turn the camera off.
-	 */
-
-	set_camera_power(cam, 0);
-
-	kfree(cam->raw_image);
-	rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-	kfree(cam->cntrlbuf);
-
-	mutex_lock(&cam->cam_lock);
-
-	cam->open_count--;
-	open_count = cam->open_count;
-	udev = cam->udev;
-
-	mutex_unlock(&cam->cam_lock);
-
-	if (!open_count && !udev) {
-		kfree(cam);
-	}
-
-	return 0;
-}
-
-static void vicam_decode_color(const u8 *data, u8 *rgb)
-{
-	/* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB
-	 * Copyright (C) 2002 Monroe Williams (monroe@pobox.com)
-	 */
-
-	int i, prevY, nextY;
-
-	prevY = 512;
-	nextY = 512;
-
-	data += VICAM_HEADER_SIZE;
-
-	for( i = 0; i < 240; i++, data += 512 ) {
-		const int y = ( i * 242 ) / 240;
-
-		int j, prevX, nextX;
-		int Y, Cr, Cb;
-
-		if ( y == 242 - 1 ) {
-			nextY = -512;
-		}
-
-		prevX = 1;
-		nextX = 1;
-
-		for ( j = 0; j < 320; j++, rgb += 3 ) {
-			const int x = ( j * 512 ) / 320;
-			const u8 * const src = &data[x];
-
-			if ( x == 512 - 1 ) {
-				nextX = -1;
-			}
-
-			Cr = ( src[prevX] - src[0] ) +
-				( src[nextX] - src[0] );
-			Cr /= 2;
-
-			Cb = ( src[prevY] - src[prevX + prevY] ) +
-				( src[prevY] - src[nextX + prevY] ) +
-				( src[nextY] - src[prevX + nextY] ) +
-				( src[nextY] - src[nextX + nextY] );
-			Cb /= 4;
-
-			Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 );
-
-			if ( i & 1 ) {
-				int Ct = Cr;
-				Cr = Cb;
-				Cb = Ct;
-			}
-
-			if ( ( x ^ i ) & 1 ) {
-				Cr = -Cr;
-				Cb = -Cb;
-			}
-
-			rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) +
-					500 ) / 900, 0, 255 );
-			rgb[1] = clamp( ( ( Y - ( 392 * Cb ) -
-					  ( 813 * Cr ) ) +
-					  500 ) / 1000, 0, 255 );
-			rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) +
-					500 ) / 1300, 0, 255 );
-
-			prevX = -1;
-		}
-
-		prevY = -512;
-	}
-}
-
-static void
-read_frame(struct vicam_camera *cam, int framenum)
-{
-	unsigned char *request = cam->cntrlbuf;
-	int realShutter;
-	int n;
-	int actual_length;
-
-	if (cam->needsDummyRead) {
-		cam->needsDummyRead = 0;
-		read_frame(cam, framenum);
-	}
-
-	memset(request, 0, 16);
-	request[0] = cam->gain;	// 0 = 0% gain, FF = 100% gain
-
-	request[1] = 0;	// 512x242 capture
-
-	request[2] = 0x90;	// the function of these two bytes
-	request[3] = 0x07;	// is not yet understood
-
-	if (cam->shutter_speed > 60) {
-		// Short exposure
-		realShutter =
-		    ((-15631900 / cam->shutter_speed) + 260533) / 1000;
-		request[4] = realShutter & 0xFF;
-		request[5] = (realShutter >> 8) & 0xFF;
-		request[6] = 0x03;
-		request[7] = 0x01;
-	} else {
-		// Long exposure
-		realShutter = 15600 / cam->shutter_speed - 1;
-		request[4] = 0;
-		request[5] = 0;
-		request[6] = realShutter & 0xFF;
-		request[7] = realShutter >> 8;
-	}
-
-	// Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
-	request[8] = 0;
-	// bytes 9-15 do not seem to affect exposure or image quality
-
-	mutex_lock(&cam->cam_lock);
-
-	if (!cam->udev) {
-		goto done;
-	}
-
-	n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16);
-
-	if (n < 0) {
-		printk(KERN_ERR
-		       " Problem sending frame capture control message");
-		goto done;
-	}
-
-	n = usb_bulk_msg(cam->udev,
-			 usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint),
-			 cam->raw_image,
-			 512 * 242 + 128, &actual_length, 10000);
-
-	if (n < 0) {
-		printk(KERN_ERR "Problem during bulk read of frame data: %d\n",
-		       n);
-	}
-
- done:
-	mutex_unlock(&cam->cam_lock);
-}
-
-static ssize_t
-vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos )
-{
-	struct vicam_camera *cam = file->private_data;
-
-	DBG("read %d bytes.\n", (int) count);
-
-	if (*ppos >= VICAM_MAX_FRAME_SIZE) {
-		*ppos = 0;
-		return 0;
-	}
-
-	if (*ppos == 0) {
-		read_frame(cam, 0);
-		vicam_decode_color(cam->raw_image,
-				   cam->framebuf +
-				   0 * VICAM_MAX_FRAME_SIZE);
-	}
-
-	count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos);
-
-	if (copy_to_user(buf, &cam->framebuf[*ppos], count)) {
-		count = -EFAULT;
-	} else {
-		*ppos += count;
-	}
-
-	if (count == VICAM_MAX_FRAME_SIZE) {
-		*ppos = 0;
-	}
-
-	return count;
-}
-
-
-static int
-vicam_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	// TODO: allocate the raw frame buffer if necessary
-	unsigned long page, pos;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	struct vicam_camera *cam = file->private_data;
-
-	if (!cam)
-		return -ENODEV;
-
-	DBG("vicam_mmap: %ld\n", size);
-
-	/* We let mmap allocate as much as it wants because Linux was adding 2048 bytes
-	 * to the size the application requested for mmap and it was screwing apps up.
-	 if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE)
-	 return -EINVAL;
-	 */
-
-	pos = (unsigned long)cam->framebuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_file_operations vicam_fops = {
-	.owner		= THIS_MODULE,
-	.open		= vicam_open,
-	.release	= vicam_close,
-	.read		= vicam_read,
-	.mmap		= vicam_mmap,
-	.ioctl		= vicam_ioctl,
-};
-
-static struct video_device vicam_template = {
-	.name 		= "ViCam-based USB Camera",
-	.fops 		= &vicam_fops,
-	.release 	= video_device_release_empty,
-};
-
-/* table of devices that work with this driver */
-static struct usb_device_id vicam_table[] = {
-	{USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)},
-	{USB_DEVICE(USB_COMPRO_VENDOR_ID, USB_COMPRO_PRODUCT_ID)},
-	{}			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, vicam_table);
-
-static struct usb_driver vicam_driver = {
-	.name		= "vicam",
-	.probe		= vicam_probe,
-	.disconnect	= vicam_disconnect,
-	.id_table	= vicam_table
-};
-
-/**
- *	vicam_probe
- *	@intf: the interface
- *	@id: the device id
- *
- *	Called by the usb core when a new device is connected that it thinks
- *	this driver might be interested in.
- */
-static int
-vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	int bulkEndpoint = 0;
-	const struct usb_host_interface *interface;
-	const struct usb_endpoint_descriptor *endpoint;
-	struct vicam_camera *cam;
-
-	printk(KERN_INFO "ViCam based webcam connected\n");
-
-	interface = intf->cur_altsetting;
-
-	DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
-	       interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
-	endpoint = &interface->endpoint[0].desc;
-
-	if (usb_endpoint_is_bulk_in(endpoint)) {
-		/* we found a bulk in endpoint */
-		bulkEndpoint = endpoint->bEndpointAddress;
-	} else {
-		printk(KERN_ERR
-		       "No bulk in endpoint was found ?! (this is bad)\n");
-	}
-
-	if ((cam =
-	     kzalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING
-		       "could not allocate kernel memory for vicam_camera struct\n");
-		return -ENOMEM;
-	}
-
-
-	cam->shutter_speed = 15;
-
-	mutex_init(&cam->cam_lock);
-
-	memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template));
-	video_set_drvdata(&cam->vdev, cam);
-
-	cam->udev = dev;
-	cam->bulkEndpoint = bulkEndpoint;
-
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
-		kfree(cam);
-		printk(KERN_WARNING "video_register_device failed\n");
-		return -EIO;
-	}
-
-	printk(KERN_INFO "ViCam webcam driver now controlling device %s\n",
-		video_device_node_name(&cam->vdev));
-
-	usb_set_intfdata (intf, cam);
-
-	return 0;
-}
-
-static void
-vicam_disconnect(struct usb_interface *intf)
-{
-	int open_count;
-	struct vicam_camera *cam = usb_get_intfdata (intf);
-	usb_set_intfdata (intf, NULL);
-
-	/* we must unregister the device before taking its
-	 * cam_lock. This is because the video open call
-	 * holds the same lock as video unregister. if we
-	 * unregister inside of the cam_lock and open also
-	 * uses the cam_lock, we get deadlock.
-	 */
-
-	video_unregister_device(&cam->vdev);
-
-	/* stop the camera from being used */
-
-	mutex_lock(&cam->cam_lock);
-
-	/* mark the camera as gone */
-
-	cam->udev = NULL;
-
-	/* the only thing left to do is synchronize with
-	 * our close/release function on who should release
-	 * the camera memory. if there are any users using the
-	 * camera, it's their job. if there are no users,
-	 * it's ours.
-	 */
-
-	open_count = cam->open_count;
-
-	mutex_unlock(&cam->cam_lock);
-
-	if (!open_count) {
-		kfree(cam);
-	}
-
-	printk(KERN_DEBUG "ViCam-based WebCam disconnected\n");
-}
-
-/*
- */
-static int __init
-usb_vicam_init(void)
-{
-	int retval;
-	DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
-	retval = usb_register(&vicam_driver);
-	if (retval)
-		printk(KERN_WARNING "usb_register failed!\n");
-	return retval;
-}
-
-static void __exit
-usb_vicam_exit(void)
-{
-	DBG(KERN_INFO
-	       "ViCam-based WebCam driver shutdown\n");
-
-	usb_deregister(&vicam_driver);
-}
-
-module_init(usb_vicam_init);
-module_exit(usb_vicam_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("vicam/firmware.fw");
-- 
cgit v1.2.3


From 71bb2876a3b2af8e6fd5ac20921ee0de9e07d809 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 07:36:55 -0300
Subject: [media] se401: deprecate driver, move to staging

The se401 driver is deprecated and is moved to staging. If no one will
convert this driver to V4L2, then it will be removed in 2.6.39.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig  |   11 -
 drivers/media/video/Makefile |    1 -
 drivers/media/video/se401.c  | 1492 ------------------------------------------
 drivers/media/video/se401.h  |  236 -------
 4 files changed, 1740 deletions(-)
 delete mode 100644 drivers/media/video/se401.c
 delete mode 100644 drivers/media/video/se401.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 3655b30254d9..b3bf04368bf2 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -917,17 +917,6 @@ source "drivers/media/video/usbvision/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"
 
-config USB_SE401
-	tristate "USB SE401 Camera support"
-	depends on VIDEO_V4L1
-	---help---
-	  Say Y here if you want to connect this type of camera to your
-	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
-	  for more information and for a list of supported cameras.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called se401.
-
 source "drivers/media/video/sn9c102/Kconfig"
 
 source "drivers/media/video/pwc/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2f2e3ac877b4..fd684dd4f91c 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -122,7 +122,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
-obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
 obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
deleted file mode 100644
index 41360d7c3e96..000000000000
--- a/drivers/media/video/se401.c
+++ /dev/null
@@ -1,1492 +0,0 @@
-/*
- * Endpoints (formerly known as AOX) se401 USB Camera Driver
- *
- * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
- *
- * Still somewhat based on the Linux ov511 driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Thanks to Endpoints Inc. (www.endpoints.com) for making documentation on
- * their chipset available and supporting me while writing this driver.
- * 	- Jeroen Vreeken
- */
-
-static const char version[] = "0.24";
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/pagemap.h>
-#include <linux/usb.h>
-#include "se401.h"
-
-static int flickerless;
-static int video_nr = -1;
-
-static struct usb_device_id device_table[] = {
-	{ USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */
-	{ USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */
-	{ USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */
-	{ USB_DEVICE(0x047d, 0x5002) },/* Kensington 6701(5/7) */
-	{ USB_DEVICE(0x047d, 0x5003) },/* Kensington 67016 */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, device_table);
-
-MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>");
-MODULE_DESCRIPTION("SE401 USB Camera Driver");
-MODULE_LICENSE("GPL");
-module_param(flickerless, int, 0);
-MODULE_PARM_DESC(flickerless,
-		"Net frequency to adjust exposure time to (0/50/60)");
-module_param(video_nr, int, 0);
-
-static struct usb_driver se401_driver;
-
-
-/**********************************************************************
- *
- * Memory management
- *
- **********************************************************************/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr +=  PAGE_SIZE;
-		size -=  PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr +=  PAGE_SIZE;
-		size -=  PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-
-
-/****************************************************************************
- *
- * se401 register read/write functions
- *
- ***************************************************************************/
-
-static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req,
-			 unsigned short value, unsigned char *cp, int size)
-{
-	return usb_control_msg(
-		se401->dev,
-		set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
-		req,
-		(set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		0,
-		cp,
-		size,
-		1000
-	);
-}
-
-static int se401_set_feature(struct usb_se401 *se401, unsigned short selector,
-			     unsigned short param)
-{
-	/* specs say that the selector (address) should go in the value field
-	   and the param in index, but in the logs of the windows driver they do
-	   this the other way around...
-	 */
-	return usb_control_msg(
-		se401->dev,
-		usb_sndctrlpipe(se401->dev, 0),
-		SE401_REQ_SET_EXT_FEATURE,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		param,
-		selector,
-		NULL,
-		0,
-		1000
-	);
-}
-
-static unsigned short se401_get_feature(struct usb_se401 *se401,
-					unsigned short selector)
-{
-	/* For 'set' the selecetor should be in index, not sure if the spec is
-	   wrong here to....
-	 */
-	unsigned char cp[2];
-	usb_control_msg(
-		se401->dev,
-		usb_rcvctrlpipe(se401->dev, 0),
-		SE401_REQ_GET_EXT_FEATURE,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		0,
-		selector,
-		cp,
-		2,
-		1000
-	);
-	return cp[0]+cp[1]*256;
-}
-
-/****************************************************************************
- *
- * Camera control
- *
- ***************************************************************************/
-
-
-static int se401_send_pict(struct usb_se401 *se401)
-{
-	/* integration time low */
-	se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);
-	/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);
-	/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);
-	/* reset level value */
-	se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
-	/* red color gain */
-	se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);
-	/* green color gain */
-	se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);
-	/* blue color gain */
-	se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);
-
-	return 0;
-}
-
-static void se401_set_exposure(struct usb_se401 *se401, int brightness)
-{
-	int integration = brightness << 5;
-
-	if (flickerless == 50)
-		integration = integration-integration % 106667;
-	if (flickerless == 60)
-		integration = integration-integration % 88889;
-	se401->brightness = integration >> 5;
-	se401->expose_h = (integration >> 16) & 0xff;
-	se401->expose_m = (integration >> 8) & 0xff;
-	se401->expose_l = integration & 0xff;
-}
-
-static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p)
-{
-	p->brightness = se401->brightness;
-	if (se401->enhance)
-		p->whiteness = 32768;
-	else
-		p->whiteness = 0;
-
-	p->colour = 65535;
-	p->contrast = 65535;
-	p->hue = se401->rgain << 10;
-	p->palette = se401->palette;
-	p->depth = 3; /* rgb24 */
-	return 0;
-}
-
-
-static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p)
-{
-	if (p->palette != VIDEO_PALETTE_RGB24)
-		return 1;
-	se401->palette = p->palette;
-	if (p->hue != se401->hue) {
-		se401->rgain =  p->hue >> 10;
-		se401->bgain =  0x40-(p->hue >> 10);
-		se401->hue = p->hue;
-	}
-	if (p->brightness != se401->brightness)
-		se401_set_exposure(se401, p->brightness);
-
-	if (p->whiteness >= 32768)
-		se401->enhance = 1;
-	else
-		se401->enhance = 0;
-	se401_send_pict(se401);
-	se401_send_pict(se401);
-	return 0;
-}
-
-/*
-	Hyundai have some really nice docs about this and other sensor related
-	stuff on their homepage: www.hei.co.kr
-*/
-static void se401_auto_resetlevel(struct usb_se401 *se401)
-{
-	unsigned int ahrc, alrc;
-	int oldreset = se401->resetlevel;
-
-	/* For some reason this normally read-only register doesn't get reset
-	   to zero after reading them just once...
-	 */
-	se401_get_feature(se401, HV7131_REG_HIREFNOH);
-	se401_get_feature(se401, HV7131_REG_HIREFNOL);
-	se401_get_feature(se401, HV7131_REG_LOREFNOH);
-	se401_get_feature(se401, HV7131_REG_LOREFNOL);
-	ahrc = 256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
-	    se401_get_feature(se401, HV7131_REG_HIREFNOL);
-	alrc = 256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
-	    se401_get_feature(se401, HV7131_REG_LOREFNOL);
-
-	/* Not an exact science, but it seems to work pretty well... */
-	if (alrc > 10) {
-		while (alrc >= 10 && se401->resetlevel < 63) {
-			se401->resetlevel++;
-			alrc /= 2;
-		}
-	} else if (ahrc > 20) {
-		while (ahrc >= 20 && se401->resetlevel > 0) {
-			se401->resetlevel--;
-			ahrc /= 2;
-		}
-	}
-	if (se401->resetlevel != oldreset)
-		se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
-
-	return;
-}
-
-/* irq handler for snapshot button */
-static void se401_button_irq(struct urb *urb)
-{
-	struct usb_se401 *se401 = urb->context;
-	int status;
-
-	if (!se401->dev) {
-		dev_info(&urb->dev->dev, "device vapourished\n");
-		return;
-	}
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-							__func__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d",
-							__func__, urb->status);
-		goto exit;
-	}
-
-	if (urb->actual_length  >= 2)
-		if (se401->button)
-			se401->buttonpressed = 1;
-exit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, status);
-}
-
-static void se401_video_irq(struct urb *urb)
-{
-	struct usb_se401 *se401 = urb->context;
-	int length = urb->actual_length;
-
-	/* ohoh... */
-	if (!se401->streaming)
-		return;
-
-	if (!se401->dev) {
-		dev_info(&urb->dev->dev, "device vapourished\n");
-		return;
-	}
-
-	/* 0 sized packets happen if we are to fast, but sometimes the camera
-	   keeps sending them forever...
-	 */
-	if (length && !urb->status) {
-		se401->nullpackets = 0;
-		switch (se401->scratch[se401->scratch_next].state) {
-		case BUFFER_READY:
-		case BUFFER_BUSY:
-			se401->dropped++;
-			break;
-		case BUFFER_UNUSED:
-			memcpy(se401->scratch[se401->scratch_next].data,
-				(unsigned char *)urb->transfer_buffer, length);
-			se401->scratch[se401->scratch_next].state
-							= BUFFER_READY;
-			se401->scratch[se401->scratch_next].offset
-							= se401->bayeroffset;
-			se401->scratch[se401->scratch_next].length = length;
-			if (waitqueue_active(&se401->wq))
-				wake_up_interruptible(&se401->wq);
-			se401->scratch_overflow = 0;
-			se401->scratch_next++;
-			if (se401->scratch_next >= SE401_NUMSCRATCH)
-				se401->scratch_next = 0;
-			break;
-		}
-		se401->bayeroffset += length;
-		if (se401->bayeroffset >= se401->cheight * se401->cwidth)
-			se401->bayeroffset = 0;
-	} else {
-		se401->nullpackets++;
-		if (se401->nullpackets > SE401_MAX_NULLPACKETS)
-			if (waitqueue_active(&se401->wq))
-				wake_up_interruptible(&se401->wq);
-	}
-
-	/* Resubmit urb for new data */
-	urb->status = 0;
-	urb->dev = se401->dev;
-	if (usb_submit_urb(urb, GFP_KERNEL))
-		dev_info(&urb->dev->dev, "urb burned down\n");
-	return;
-}
-
-static void se401_send_size(struct usb_se401 *se401, int width, int height)
-{
-	int i = 0;
-	int mode = 0x03; /* No compression */
-	int sendheight = height;
-	int sendwidth = width;
-
-	/* JangGu compression can only be used with the camera supported sizes,
-	   but bayer seems to work with any size that fits on the sensor.
-	   We check if we can use compression with the current size with either
-	   4 or 16 times subcapturing, if not we use uncompressed bayer data
-	   but this will result in cutouts of the maximum size....
-	 */
-	while (i < se401->sizes && !(se401->width[i] == width &&
-						se401->height[i] == height))
-		i++;
-	while (i < se401->sizes) {
-		if (se401->width[i] == width * 2 &&
-				se401->height[i] == height * 2) {
-			sendheight = se401->height[i];
-			sendwidth = se401->width[i];
-			mode = 0x40;
-		}
-		if (se401->width[i] == width * 4 &&
-				se401->height[i] == height * 4) {
-			sendheight = se401->height[i];
-			sendwidth = se401->width[i];
-			mode = 0x42;
-		}
-		i++;
-	}
-
-	se401_sndctrl(1, se401, SE401_REQ_SET_WIDTH, sendwidth, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0);
-	se401_set_feature(se401, SE401_OPERATINGMODE, mode);
-
-	if (mode == 0x03)
-		se401->format = FMT_BAYER;
-	else
-		se401->format = FMT_JANGGU;
-}
-
-/*
-	In this function se401_send_pict is called several times,
-	for some reason (depending on the state of the sensor and the phase of
-	the moon :) doing this only in either place doesn't always work...
-*/
-static int se401_start_stream(struct usb_se401 *se401)
-{
-	struct urb *urb;
-	int err = 0, i;
-	se401->streaming = 1;
-
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-
-	/* Set picture settings */
-	/* windowed + pix intg */
-	se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);
-	se401_send_pict(se401);
-
-	se401_send_size(se401, se401->cwidth, se401->cheight);
-
-	se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE,
-								0, NULL, 0);
-
-	/* Do some memory allocation */
-	for (i = 0; i < SE401_NUMFRAMES; i++) {
-		se401->frame[i].data = se401->fbuf + i * se401->maxframesize;
-		se401->frame[i].curpix = 0;
-	}
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		se401->sbuf[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
-		if (!se401->sbuf[i].data) {
-			for (i = i - 1; i >= 0; i--) {
-				kfree(se401->sbuf[i].data);
-				se401->sbuf[i].data = NULL;
-			}
-			return -ENOMEM;
-		}
-	}
-
-	se401->bayeroffset = 0;
-	se401->scratch_next = 0;
-	se401->scratch_use = 0;
-	se401->scratch_overflow = 0;
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		se401->scratch[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
-		if (!se401->scratch[i].data) {
-			for (i = i - 1; i >= 0; i--) {
-				kfree(se401->scratch[i].data);
-				se401->scratch[i].data = NULL;
-			}
-			goto nomem_sbuf;
-		}
-		se401->scratch[i].state = BUFFER_UNUSED;
-	}
-
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			for (i = i - 1; i >= 0; i--) {
-				usb_kill_urb(se401->urb[i]);
-				usb_free_urb(se401->urb[i]);
-				se401->urb[i] = NULL;
-			}
-			goto nomem_scratch;
-		}
-
-		usb_fill_bulk_urb(urb, se401->dev,
-			usb_rcvbulkpipe(se401->dev, SE401_VIDEO_ENDPOINT),
-			se401->sbuf[i].data, SE401_PACKETSIZE,
-			se401_video_irq,
-			se401);
-
-		se401->urb[i] = urb;
-
-		err = usb_submit_urb(se401->urb[i], GFP_KERNEL);
-		if (err)
-			err("urb burned down");
-	}
-
-	se401->framecount = 0;
-
-	return 0;
-
- nomem_scratch:
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		kfree(se401->scratch[i].data);
-		se401->scratch[i].data = NULL;
-	}
- nomem_sbuf:
-	for (i = 0; i < SE401_NUMSBUF; i++) {
-		kfree(se401->sbuf[i].data);
-		se401->sbuf[i].data = NULL;
-	}
-	return -ENOMEM;
-}
-
-static int se401_stop_stream(struct usb_se401 *se401)
-{
-	int i;
-
-	if (!se401->streaming || !se401->dev)
-		return 1;
-
-	se401->streaming = 0;
-
-	se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0);
-
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
-
-	for (i = 0; i < SE401_NUMSBUF; i++)
-		if (se401->urb[i]) {
-			usb_kill_urb(se401->urb[i]);
-			usb_free_urb(se401->urb[i]);
-			se401->urb[i] = NULL;
-			kfree(se401->sbuf[i].data);
-		}
-	for (i = 0; i < SE401_NUMSCRATCH; i++) {
-		kfree(se401->scratch[i].data);
-		se401->scratch[i].data = NULL;
-	}
-
-	return 0;
-}
-
-static int se401_set_size(struct usb_se401 *se401, int width, int height)
-{
-	int wasstreaming = se401->streaming;
-	/* Check to see if we need to change */
-	if (se401->cwidth == width && se401->cheight == height)
-		return 0;
-
-	/* Check for a valid mode */
-	if (!width || !height)
-		return 1;
-	if ((width & 1) || (height & 1))
-		return 1;
-	if (width > se401->width[se401->sizes-1])
-		return 1;
-	if (height > se401->height[se401->sizes-1])
-		return 1;
-
-	/* Stop a current stream and start it again at the new size */
-	if (wasstreaming)
-		se401_stop_stream(se401);
-	se401->cwidth = width;
-	se401->cheight = height;
-	if (wasstreaming)
-		se401_start_stream(se401);
-	return 0;
-}
-
-
-/****************************************************************************
- *
- * Video Decoding
- *
- ***************************************************************************/
-
-/*
-	This shouldn't really be done in a v4l driver....
-	But it does make the image look a lot more usable.
-	Basically it lifts the dark pixels more than the light pixels.
-*/
-static inline void enhance_picture(unsigned char *frame, int len)
-{
-	while (len--) {
-		*frame = (((*frame^255)*(*frame^255))/255)^255;
-		frame++;
-	}
-}
-
-static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data)
-{
-	struct se401_frame *frame = &se401->frame[se401->curframe];
-	int linelength = se401->cwidth * 3;
-
-	if (frame->curlinepix >= linelength) {
-		frame->curlinepix = 0;
-		frame->curline += linelength;
-	}
-
-	/* First three are absolute, all others relative.
-	 * Format is rgb from right to left (mirrorred image),
-	 * we flip it to get bgr from left to right. */
-	if (frame->curlinepix < 3)
-		*(frame->curline-frame->curlinepix) = 1 + data * 4;
-	else
-		*(frame->curline-frame->curlinepix) =
-		    *(frame->curline-frame->curlinepix + 3) + data * 4;
-	frame->curlinepix++;
-}
-
-static inline void decode_JangGu_vlc(struct usb_se401 *se401,
-			unsigned char *data, int bit_exp, int packetlength)
-{
-	int pos = 0;
-	int vlc_cod = 0;
-	int vlc_size = 0;
-	int vlc_data = 0;
-	int bit_cur;
-	int bit;
-	data += 4;
-	while (pos < packetlength) {
-		bit_cur = 8;
-		while (bit_cur && bit_exp) {
-			bit = ((*data) >> (bit_cur-1))&1;
-			if (!vlc_cod) {
-				if (bit) {
-					vlc_size++;
-				} else {
-					if (!vlc_size)
-						decode_JangGu_integrate(se401, 0);
-					else {
-						vlc_cod = 2;
-						vlc_data = 0;
-					}
-				}
-			} else {
-				if (vlc_cod == 2) {
-					if (!bit)
-						vlc_data =  -(1 << vlc_size) + 1;
-					vlc_cod--;
-				}
-				vlc_size--;
-				vlc_data += bit << vlc_size;
-				if (!vlc_size) {
-					decode_JangGu_integrate(se401, vlc_data);
-					vlc_cod = 0;
-				}
-			}
-			bit_cur--;
-			bit_exp--;
-		}
-		pos++;
-		data++;
-	}
-}
-
-static inline void decode_JangGu(struct usb_se401 *se401,
-						struct se401_scratch *buffer)
-{
-	unsigned char *data = buffer->data;
-	int len = buffer->length;
-	int bit_exp = 0, pix_exp = 0, frameinfo = 0, packetlength = 0, size;
-	int datapos = 0;
-
-	/* New image? */
-	if (!se401->frame[se401->curframe].curpix) {
-		se401->frame[se401->curframe].curlinepix = 0;
-		se401->frame[se401->curframe].curline =
-		    se401->frame[se401->curframe].data+
-		    se401->cwidth * 3 - 1;
-		if (se401->frame[se401->curframe].grabstate == FRAME_READY)
-			se401->frame[se401->curframe].grabstate = FRAME_GRABBING;
-		se401->vlcdatapos = 0;
-	}
-	while (datapos < len) {
-		size = 1024 - se401->vlcdatapos;
-		if (size+datapos > len)
-			size = len-datapos;
-		memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size);
-		se401->vlcdatapos += size;
-		packetlength = 0;
-		if (se401->vlcdatapos >= 4) {
-			bit_exp = se401->vlcdata[3] + (se401->vlcdata[2] << 8);
-			pix_exp = se401->vlcdata[1] +
-					((se401->vlcdata[0] & 0x3f) << 8);
-			frameinfo = se401->vlcdata[0] & 0xc0;
-			packetlength = ((bit_exp + 47) >> 4) << 1;
-			if (packetlength > 1024) {
-				se401->vlcdatapos = 0;
-				datapos = len;
-				packetlength = 0;
-				se401->error++;
-				se401->frame[se401->curframe].curpix = 0;
-			}
-		}
-		if (packetlength && se401->vlcdatapos >= packetlength) {
-			decode_JangGu_vlc(se401, se401->vlcdata, bit_exp,
-								packetlength);
-			se401->frame[se401->curframe].curpix += pix_exp * 3;
-			datapos += size-(se401->vlcdatapos-packetlength);
-			se401->vlcdatapos = 0;
-			if (se401->frame[se401->curframe].curpix >= se401->cwidth * se401->cheight * 3) {
-				if (se401->frame[se401->curframe].curpix == se401->cwidth * se401->cheight * 3) {
-					if (se401->frame[se401->curframe].grabstate == FRAME_GRABBING) {
-						se401->frame[se401->curframe].grabstate = FRAME_DONE;
-						se401->framecount++;
-						se401->readcount++;
-					}
-					if (se401->frame[(se401->curframe + 1) & (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY)
-						se401->curframe = (se401->curframe + 1) & (SE401_NUMFRAMES - 1);
-				} else
-					se401->error++;
-				se401->frame[se401->curframe].curpix = 0;
-				datapos = len;
-			}
-		} else
-			datapos += size;
-	}
-}
-
-static inline void decode_bayer(struct usb_se401 *se401,
-						struct se401_scratch *buffer)
-{
-	unsigned char *data = buffer->data;
-	int len = buffer->length;
-	int offset = buffer->offset;
-	int datasize = se401->cwidth * se401->cheight;
-	struct se401_frame *frame = &se401->frame[se401->curframe];
-	unsigned char *framedata = frame->data, *curline, *nextline;
-	int width = se401->cwidth;
-	int blineoffset = 0, bline;
-	int linelength = width * 3, i;
-
-
-	if (frame->curpix == 0) {
-		if (frame->grabstate == FRAME_READY)
-			frame->grabstate = FRAME_GRABBING;
-
-		frame->curline = framedata + linelength;
-		frame->curlinepix = 0;
-	}
-
-	if (offset != frame->curpix) {
-		/* Regard frame as lost :( */
-		frame->curpix = 0;
-		se401->error++;
-		return;
-	}
-
-	/* Check if we have to much data */
-	if (frame->curpix + len > datasize)
-		len = datasize-frame->curpix;
-
-	if (se401->cheight % 4)
-		blineoffset = 1;
-	bline = frame->curpix / se401->cwidth+blineoffset;
-
-	curline = frame->curline;
-	nextline = curline + linelength;
-	if (nextline >= framedata+datasize * 3)
-		nextline = curline;
-	while (len) {
-		if (frame->curlinepix >= width) {
-			frame->curlinepix -= width;
-			bline = frame->curpix / width + blineoffset;
-			curline += linelength*2;
-			nextline += linelength*2;
-			if (curline >= framedata+datasize * 3) {
-				frame->curlinepix++;
-				curline -= 3;
-				nextline -= 3;
-				len--;
-				data++;
-				frame->curpix++;
-			}
-			if (nextline >= framedata+datasize*3)
-				nextline = curline;
-		}
-		if (bline & 1) {
-			if (frame->curlinepix & 1) {
-				*(curline + 2) = *data;
-				*(curline - 1) = *data;
-				*(nextline + 2) = *data;
-				*(nextline - 1) = *data;
-			} else {
-				*(curline + 1) =
-					(*(curline + 1) + *data) / 2;
-				*(curline-2) =
-					(*(curline - 2) + *data) / 2;
-				*(nextline + 1) = *data;
-				*(nextline - 2) = *data;
-			}
-		} else {
-			if (frame->curlinepix & 1) {
-				*(curline + 1) =
-					(*(curline + 1) + *data) / 2;
-				*(curline - 2) =
-					(*(curline - 2) + *data) / 2;
-				*(nextline + 1) = *data;
-				*(nextline - 2) = *data;
-			} else {
-				*curline = *data;
-				*(curline - 3) = *data;
-				*nextline = *data;
-				*(nextline - 3) = *data;
-			}
-		}
-		frame->curlinepix++;
-		curline -= 3;
-		nextline -= 3;
-		len--;
-		data++;
-		frame->curpix++;
-	}
-	frame->curline = curline;
-
-	if (frame->curpix >= datasize) {
-		/* Fix the top line */
-		framedata += linelength;
-		for (i = 0; i < linelength; i++) {
-			framedata--;
-			*framedata = *(framedata + linelength);
-		}
-		/* Fix the left side (green is already present) */
-		for (i = 0; i < se401->cheight; i++) {
-			*framedata = *(framedata + 3);
-			*(framedata + 1) = *(framedata + 4);
-			*(framedata + 2) = *(framedata + 5);
-			framedata += linelength;
-		}
-		frame->curpix = 0;
-		frame->grabstate = FRAME_DONE;
-		se401->framecount++;
-		se401->readcount++;
-		if (se401->frame[(se401->curframe + 1) &
-		    (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) {
-			se401->curframe = (se401->curframe+1) &
-							(SE401_NUMFRAMES-1);
-		}
-	}
-}
-
-static int se401_newframe(struct usb_se401 *se401, int framenr)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int errors = 0;
-
-	while (se401->streaming &&
-	    (se401->frame[framenr].grabstate == FRAME_READY ||
-	     se401->frame[framenr].grabstate == FRAME_GRABBING)) {
-		if (!se401->frame[framenr].curpix)
-			errors++;
-
-		wait_interruptible(
-		    se401->scratch[se401->scratch_use].state != BUFFER_READY,
-						    &se401->wq, &wait);
-		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
-			se401->nullpackets = 0;
-			dev_info(&se401->dev->dev,
-			 "too many null length packets, restarting capture\n");
-			se401_stop_stream(se401);
-			se401_start_stream(se401);
-		} else {
-			if (se401->scratch[se401->scratch_use].state !=
-								BUFFER_READY) {
-				se401->frame[framenr].grabstate = FRAME_ERROR;
-				return -EIO;
-			}
-			se401->scratch[se401->scratch_use].state = BUFFER_BUSY;
-			if (se401->format == FMT_JANGGU)
-				decode_JangGu(se401,
-					&se401->scratch[se401->scratch_use]);
-			else
-				decode_bayer(se401,
-					&se401->scratch[se401->scratch_use]);
-
-			se401->scratch[se401->scratch_use].state =
-							BUFFER_UNUSED;
-			se401->scratch_use++;
-			if (se401->scratch_use >= SE401_NUMSCRATCH)
-				se401->scratch_use = 0;
-			if (errors > SE401_MAX_ERRORS) {
-				errors = 0;
-				dev_info(&se401->dev->dev,
-				      "too many errors, restarting capture\n");
-				se401_stop_stream(se401);
-				se401_start_stream(se401);
-			}
-		}
-	}
-
-	if (se401->frame[framenr].grabstate == FRAME_DONE)
-		if (se401->enhance)
-			enhance_picture(se401->frame[framenr].data,
-					se401->cheight * se401->cwidth * 3);
-	return 0;
-}
-
-static void usb_se401_remove_disconnected(struct usb_se401 *se401)
-{
-	int i;
-
-	se401->dev = NULL;
-
-	for (i = 0; i < SE401_NUMSBUF; i++)
-		if (se401->urb[i]) {
-			usb_kill_urb(se401->urb[i]);
-			usb_free_urb(se401->urb[i]);
-			se401->urb[i] = NULL;
-			kfree(se401->sbuf[i].data);
-		}
-
-	for (i = 0; i < SE401_NUMSCRATCH; i++)
-		kfree(se401->scratch[i].data);
-
-	if (se401->inturb) {
-		usb_kill_urb(se401->inturb);
-		usb_free_urb(se401->inturb);
-	}
-	dev_info(&se401->dev->dev, "%s disconnected", se401->camera_name);
-
-	/* Free the memory */
-	kfree(se401->width);
-	kfree(se401->height);
-	kfree(se401);
-}
-
-
-
-/****************************************************************************
- *
- * Video4Linux
- *
- ***************************************************************************/
-
-
-static int se401_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	int err = 0;
-
-	mutex_lock(&se401->lock);
-	if (se401->user) {
-		mutex_unlock(&se401->lock);
-		return -EBUSY;
-	}
-	se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
-	if (se401->fbuf)
-		file->private_data = dev;
-	else
-		err = -ENOMEM;
-	se401->user = !err;
-	mutex_unlock(&se401->lock);
-
-	return err;
-}
-
-static int se401_close(struct file *file)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	int i;
-
-	rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES);
-	if (se401->removed) {
-		dev_info(&se401->dev->dev, "device unregistered\n");
-		usb_se401_remove_disconnected(se401);
-	} else {
-		for (i = 0; i < SE401_NUMFRAMES; i++)
-			se401->frame[i].grabstate = FRAME_UNUSED;
-		if (se401->streaming)
-			se401_stop_stream(se401);
-		se401->user = 0;
-	}
-	file->private_data = NULL;
-	return 0;
-}
-
-static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *vdev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)vdev;
-
-	if (!se401->dev)
-		return -EIO;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-		strcpy(b->name, se401->camera_name);
-		b->type = VID_TYPE_CAPTURE;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = se401->width[se401->sizes-1];
-		b->maxheight = se401->height[se401->sizes-1];
-		b->minwidth = se401->width[0];
-		b->minheight = se401->height[0];
-		return 0;
-	}
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		v->flags = 0;
-		v->tuners = 0;
-		v->type = VIDEO_TYPE_CAMERA;
-		strcpy(v->name, "Camera");
-		return 0;
-	}
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGPICT:
-	{
-		struct video_picture *p = arg;
-
-		se401_get_pict(se401, p);
-		return 0;
-	}
-	case VIDIOCSPICT:
-	{
-		struct video_picture *p = arg;
-
-		if (se401_set_pict(se401, p))
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCSWIN:
-	{
-		struct video_window *vw = arg;
-
-		if (vw->flags)
-			return -EINVAL;
-		if (vw->clipcount)
-			return -EINVAL;
-		if (se401_set_size(se401, vw->width, vw->height))
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-
-		vw->x = 0;               /* FIXME */
-		vw->y = 0;
-		vw->chromakey = 0;
-		vw->flags = 0;
-		vw->clipcount = 0;
-		vw->width = se401->cwidth;
-		vw->height = se401->cheight;
-		return 0;
-	}
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *vm = arg;
-		int i;
-
-		memset(vm, 0, sizeof(*vm));
-		vm->size = SE401_NUMFRAMES * se401->maxframesize;
-		vm->frames = SE401_NUMFRAMES;
-		for (i = 0; i < SE401_NUMFRAMES; i++)
-			vm->offsets[i] = se401->maxframesize * i;
-		return 0;
-	}
-	case VIDIOCMCAPTURE:
-	{
-		struct video_mmap *vm = arg;
-
-		if (vm->format != VIDEO_PALETTE_RGB24)
-			return -EINVAL;
-		if (vm->frame >= SE401_NUMFRAMES)
-			return -EINVAL;
-		if (se401->frame[vm->frame].grabstate != FRAME_UNUSED)
-			return -EBUSY;
-
-		/* Is this according to the v4l spec??? */
-		if (se401_set_size(se401, vm->width, vm->height))
-			return -EINVAL;
-		se401->frame[vm->frame].grabstate = FRAME_READY;
-
-		if (!se401->streaming)
-			se401_start_stream(se401);
-
-		/* Set the picture properties */
-		if (se401->framecount == 0)
-			se401_send_pict(se401);
-		/* Calibrate the reset level after a few frames. */
-		if (se401->framecount % 20 == 1)
-			se401_auto_resetlevel(se401);
-
-		return 0;
-	}
-	case VIDIOCSYNC:
-	{
-		int *frame = arg;
-		int ret = 0;
-
-		if (*frame < 0 || *frame >= SE401_NUMFRAMES)
-			return -EINVAL;
-
-		ret = se401_newframe(se401, *frame);
-		se401->frame[*frame].grabstate = FRAME_UNUSED;
-		return ret;
-	}
-	case VIDIOCGFBUF:
-	{
-		struct video_buffer *vb = arg;
-
-		memset(vb, 0, sizeof(*vb));
-		return 0;
-	}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-		return -EINVAL;
-	case VIDIOCSFBUF:
-		return -EINVAL;
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-		return -EINVAL;
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-		return -EINVAL;
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
-	default:
-		return -ENOIOCTLCMD;
-	} /* end switch */
-
-	return 0;
-}
-
-static long se401_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, se401_do_ioctl);
-}
-
-static ssize_t se401_read(struct file *file, char __user *buf,
-		     size_t count, loff_t *ppos)
-{
-	int realcount = count, ret = 0;
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-
-
-	if (se401->dev ==  NULL)
-		return -EIO;
-	if (realcount > se401->cwidth*se401->cheight*3)
-		realcount = se401->cwidth*se401->cheight*3;
-
-	/* Shouldn't happen: */
-	if (se401->frame[0].grabstate == FRAME_GRABBING)
-		return -EBUSY;
-	se401->frame[0].grabstate = FRAME_READY;
-	se401->frame[1].grabstate = FRAME_UNUSED;
-	se401->curframe = 0;
-
-	if (!se401->streaming)
-		se401_start_stream(se401);
-
-	/* Set the picture properties */
-	if (se401->framecount == 0)
-		se401_send_pict(se401);
-	/* Calibrate the reset level after a few frames. */
-	if (se401->framecount%20 == 1)
-		se401_auto_resetlevel(se401);
-
-	ret = se401_newframe(se401, 0);
-
-	se401->frame[0].grabstate = FRAME_UNUSED;
-	if (ret)
-		return ret;
-	if (copy_to_user(buf, se401->frame[0].data, realcount))
-		return -EFAULT;
-
-	return realcount;
-}
-
-static int se401_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	struct usb_se401 *se401 = (struct usb_se401 *)dev;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	unsigned long page, pos;
-
-	mutex_lock(&se401->lock);
-
-	if (se401->dev ==  NULL) {
-		mutex_unlock(&se401->lock);
-		return -EIO;
-	}
-	if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1)
-							& ~(PAGE_SIZE - 1))) {
-		mutex_unlock(&se401->lock);
-		return -EINVAL;
-	}
-	pos = (unsigned long)se401->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&se401->lock);
-			return -EAGAIN;
-		}
-		start +=  PAGE_SIZE;
-		pos +=  PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -=  PAGE_SIZE;
-		else
-			size = 0;
-	}
-	mutex_unlock(&se401->lock);
-
-	return 0;
-}
-
-static const struct v4l2_file_operations se401_fops = {
-	.owner  = 	THIS_MODULE,
-	.open =         se401_open,
-	.release =      se401_close,
-	.read =         se401_read,
-	.mmap =         se401_mmap,
-	.ioctl =        se401_ioctl,
-};
-static struct video_device se401_template = {
-	.name =         "se401 USB camera",
-	.fops =         &se401_fops,
-	.release = video_device_release_empty,
-};
-
-
-
-/***************************/
-static int se401_init(struct usb_se401 *se401, int button)
-{
-	int i = 0, rc;
-	unsigned char cp[0x40];
-	char temp[200];
-	int slen;
-
-	/* led on */
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-
-	/* get camera descriptor */
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0,
-							cp, sizeof(cp));
-	if (cp[1] != 0x41) {
-		err("Wrong descriptor type");
-		return 1;
-	}
-	slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]);
-
-	se401->sizes = cp[4] + cp[5] * 256;
-	se401->width = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
-	if (!se401->width)
-		return 1;
-	se401->height = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
-	if (!se401->height) {
-		kfree(se401->width);
-		return 1;
-	}
-	for (i = 0; i < se401->sizes; i++) {
-		se401->width[i] = cp[6 + i * 4 + 0] + cp[6 + i*4 + 1] * 256;
-		se401->height[i] = cp[6 + i * 4 + 2] + cp[6 + i * 4 + 3] * 256;
-	}
-	slen += snprintf(temp + slen, 200 - slen, " Sizes:");
-	for (i = 0; i < se401->sizes; i++) {
-		slen +=  snprintf(temp + slen, 200 - slen,
-			" %dx%d", se401->width[i], se401->height[i]);
-	}
-	dev_info(&se401->dev->dev, "%s\n", temp);
-	se401->maxframesize = se401->width[se401->sizes-1] *
-					se401->height[se401->sizes - 1] * 3;
-
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
-	se401->cwidth = cp[0]+cp[1]*256;
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp));
-	se401->cheight = cp[0]+cp[1]*256;
-
-	if (!(cp[2] & SE401_FORMAT_BAYER)) {
-		err("Bayer format not supported!");
-		return 1;
-	}
-	/* set output mode (BAYER) */
-	se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE,
-						SE401_FORMAT_BAYER, NULL, 0);
-
-	rc = se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
-	se401->brightness = cp[0]+cp[1]*256;
-	/* some default values */
-	se401->resetlevel = 0x2d;
-	se401->rgain = 0x20;
-	se401->ggain = 0x20;
-	se401->bgain = 0x20;
-	se401_set_exposure(se401, 20000);
-	se401->palette = VIDEO_PALETTE_RGB24;
-	se401->enhance = 1;
-	se401->dropped = 0;
-	se401->error = 0;
-	se401->framecount = 0;
-	se401->readcount = 0;
-
-	/* Start interrupt transfers for snapshot button */
-	if (button) {
-		se401->inturb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!se401->inturb) {
-			dev_info(&se401->dev->dev,
-				 "Allocation of inturb failed\n");
-			return 1;
-		}
-		usb_fill_int_urb(se401->inturb, se401->dev,
-		    usb_rcvintpipe(se401->dev, SE401_BUTTON_ENDPOINT),
-		    &se401->button, sizeof(se401->button),
-		    se401_button_irq,
-		    se401,
-		    8
-		);
-		if (usb_submit_urb(se401->inturb, GFP_KERNEL)) {
-			dev_info(&se401->dev->dev, "int urb burned down\n");
-			return 1;
-		}
-	} else
-		se401->inturb = NULL;
-
-	/* Flash the led */
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
-	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
-
-	return 0;
-}
-
-static int se401_probe(struct usb_interface *intf,
-	const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_interface_descriptor *interface;
-	struct usb_se401 *se401;
-	char *camera_name = NULL;
-	int button = 1;
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	interface = &intf->cur_altsetting->desc;
-
-	/* Is it an se401? */
-	if (le16_to_cpu(dev->descriptor.idVendor) ==  0x03e8 &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x0004) {
-		camera_name = "Endpoints/Aox SE401";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x0471 &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x030b) {
-		camera_name = "Philips PCVC665K";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5001) {
-		camera_name = "Kensington VideoCAM 67014";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5002) {
-		camera_name = "Kensington VideoCAM 6701(5/7)";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5003) {
-		camera_name = "Kensington VideoCAM 67016";
-		button = 0;
-	} else
-		return -ENODEV;
-
-	/* Checking vendor/product should be enough, but what the hell */
-	if (interface->bInterfaceClass != 0x00)
-		return -ENODEV;
-	if (interface->bInterfaceSubClass != 0x00)
-		return -ENODEV;
-
-	/* We found one */
-	dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name);
-
-	se401 = kzalloc(sizeof(*se401), GFP_KERNEL);
-	if (se401 ==  NULL) {
-		err("couldn't kmalloc se401 struct");
-		return -ENOMEM;
-	}
-
-	se401->dev = dev;
-	se401->iface = interface->bInterfaceNumber;
-	se401->camera_name = camera_name;
-
-	dev_info(&intf->dev, "firmware version: %02x\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice) & 255);
-
-	if (se401_init(se401, button)) {
-		kfree(se401);
-		return -EIO;
-	}
-
-	memcpy(&se401->vdev, &se401_template, sizeof(se401_template));
-	memcpy(se401->vdev.name, se401->camera_name,
-					strlen(se401->camera_name));
-	init_waitqueue_head(&se401->wq);
-	mutex_init(&se401->lock);
-	wmb();
-
-	if (video_register_device(&se401->vdev,
-					VFL_TYPE_GRABBER, video_nr) < 0) {
-		kfree(se401);
-		err("video_register_device failed");
-		return -EIO;
-	}
-	dev_info(&intf->dev, "registered new video device: %s\n",
-		 video_device_node_name(&se401->vdev));
-
-	usb_set_intfdata(intf, se401);
-	return 0;
-}
-
-static void se401_disconnect(struct usb_interface *intf)
-{
-	struct usb_se401 *se401 = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (se401) {
-		video_unregister_device(&se401->vdev);
-		if (!se401->user)
-			usb_se401_remove_disconnected(se401);
-		else {
-			se401->frame[0].grabstate = FRAME_ERROR;
-			se401->frame[0].grabstate = FRAME_ERROR;
-
-			se401->streaming = 0;
-
-			wake_up_interruptible(&se401->wq);
-			se401->removed = 1;
-		}
-	}
-}
-
-static struct usb_driver se401_driver = {
-	.name		 =  "se401",
-	.id_table	 =  device_table,
-	.probe		 =  se401_probe,
-	.disconnect	 =  se401_disconnect,
-};
-
-
-
-/****************************************************************************
- *
- *  Module routines
- *
- ***************************************************************************/
-
-static int __init usb_se401_init(void)
-{
-	printk(KERN_INFO "SE401 usb camera driver version %s registering\n",
-								version);
-	if (flickerless)
-		if (flickerless != 50 && flickerless != 60) {
-			printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n");
-			return -1;
-	}
-	return usb_register(&se401_driver);
-}
-
-static void __exit usb_se401_exit(void)
-{
-	usb_deregister(&se401_driver);
-	printk(KERN_INFO "SE401 driver deregistered\frame");
-}
-
-module_init(usb_se401_init);
-module_exit(usb_se401_exit);
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
deleted file mode 100644
index bf7d2e9765b0..000000000000
--- a/drivers/media/video/se401.h
+++ /dev/null
@@ -1,236 +0,0 @@
-
-#ifndef __LINUX_se401_H
-#define __LINUX_se401_H
-
-#include <linux/uaccess.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/mutex.h>
-
-#define se401_DEBUG	/* Turn on debug messages */
-
-#ifdef se401_DEBUG
-#  define PDEBUG(level, fmt, args...) \
-if (debug >= level) \
-	info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
-#else
-#  define PDEBUG(level, fmt, args...) do {} while (0)
-#endif
-
-/* An almost drop-in replacement for sleep_on_interruptible */
-#define wait_interruptible(test, queue, wait) \
-{ \
-	add_wait_queue(queue, wait); \
-	set_current_state(TASK_INTERRUPTIBLE); \
-	if (test) \
-		schedule(); \
-	remove_wait_queue(queue, wait); \
-	set_current_state(TASK_RUNNING); \
-	if (signal_pending(current)) \
-		break; \
-}
-
-#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
-#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
-#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
-#define SE401_REQ_CAPTURE_FRAME			0x43
-#define SE401_REQ_GET_BRT			0x44
-#define SE401_REQ_SET_BRT			0x45
-#define SE401_REQ_GET_WIDTH			0x4c
-#define SE401_REQ_SET_WIDTH			0x4d
-#define SE401_REQ_GET_HEIGHT			0x4e
-#define SE401_REQ_SET_HEIGHT			0x4f
-#define SE401_REQ_GET_OUTPUT_MODE		0x50
-#define SE401_REQ_SET_OUTPUT_MODE		0x51
-#define SE401_REQ_GET_EXT_FEATURE		0x52
-#define SE401_REQ_SET_EXT_FEATURE		0x53
-#define SE401_REQ_CAMERA_POWER			0x56
-#define SE401_REQ_LED_CONTROL			0x57
-#define SE401_REQ_BIOS				0xff
-
-#define SE401_BIOS_READ				0x07
-
-#define SE401_FORMAT_BAYER	0x40
-
-/* Hyundai hv7131b registers
-   7121 and 7141 should be the same (haven't really checked...) */
-/* Mode registers: */
-#define HV7131_REG_MODE_A		0x00
-#define HV7131_REG_MODE_B		0x01
-#define HV7131_REG_MODE_C		0x02
-/* Frame registers: */
-#define HV7131_REG_FRSU		0x10
-#define HV7131_REG_FRSL		0x11
-#define HV7131_REG_FCSU		0x12
-#define HV7131_REG_FCSL		0x13
-#define HV7131_REG_FWHU		0x14
-#define HV7131_REG_FWHL		0x15
-#define HV7131_REG_FWWU		0x16
-#define HV7131_REG_FWWL		0x17
-/* Timing registers: */
-#define HV7131_REG_THBU		0x20
-#define HV7131_REG_THBL		0x21
-#define HV7131_REG_TVBU		0x22
-#define HV7131_REG_TVBL		0x23
-#define HV7131_REG_TITU		0x25
-#define HV7131_REG_TITM		0x26
-#define HV7131_REG_TITL		0x27
-#define HV7131_REG_TMCD		0x28
-/* Adjust Registers: */
-#define HV7131_REG_ARLV		0x30
-#define HV7131_REG_ARCG		0x31
-#define HV7131_REG_AGCG		0x32
-#define HV7131_REG_ABCG		0x33
-#define HV7131_REG_APBV		0x34
-#define HV7131_REG_ASLP		0x54
-/* Offset Registers: */
-#define HV7131_REG_OFSR		0x50
-#define HV7131_REG_OFSG		0x51
-#define HV7131_REG_OFSB		0x52
-/* REset level statistics registers: */
-#define HV7131_REG_LOREFNOH	0x57
-#define HV7131_REG_LOREFNOL	0x58
-#define HV7131_REG_HIREFNOH	0x59
-#define HV7131_REG_HIREFNOL	0x5a
-
-/* se401 registers */
-#define SE401_OPERATINGMODE	0x2000
-
-
-/* size of usb transfers */
-#define SE401_PACKETSIZE	4096
-/* number of queued bulk transfers to use, should be about 8 */
-#define SE401_NUMSBUF		1
-/* read the usb specs for this one :) */
-#define SE401_VIDEO_ENDPOINT	1
-#define SE401_BUTTON_ENDPOINT	2
-/* number of frames supported by the v4l part */
-#define SE401_NUMFRAMES		2
-/* scratch buffers for passing data to the decoders */
-#define SE401_NUMSCRATCH	32
-/* maximum amount of data in a JangGu packet */
-#define SE401_VLCDATALEN	1024
-/* number of nul sized packets to receive before kicking the camera */
-#define SE401_MAX_NULLPACKETS	4000
-/* number of decoding errors before kicking the camera */
-#define SE401_MAX_ERRORS	200
-
-struct usb_device;
-
-struct se401_sbuf {
-	unsigned char *data;
-};
-
-enum {
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-	FRAME_READY,		/* Ready to start grabbing */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_ERROR,		/* Something bad happened while processing */
-};
-
-enum {
-	FMT_BAYER,
-	FMT_JANGGU,
-};
-
-enum {
-	BUFFER_UNUSED,
-	BUFFER_READY,
-	BUFFER_BUSY,
-	BUFFER_DONE,
-};
-
-struct se401_scratch {
-	unsigned char *data;
-	volatile int state;
-	int offset;
-	int length;
-};
-
-struct se401_frame {
-	unsigned char *data;		/* Frame buffer */
-
-	volatile int grabstate;	/* State of grabbing */
-
-	unsigned char *curline;
-	int curlinepix;
-	int curpix;
-};
-
-struct usb_se401 {
-	struct video_device vdev;
-
-	/* Device structure */
-	struct usb_device *dev;
-
-	unsigned char iface;
-
-	char *camera_name;
-
-	int change;
-	int brightness;
-	int hue;
-	int rgain;
-	int ggain;
-	int bgain;
-	int expose_h;
-	int expose_m;
-	int expose_l;
-	int resetlevel;
-
-	int enhance;
-
-	int format;
-	int sizes;
-	int *width;
-	int *height;
-	int cwidth;		/* current width */
-	int cheight;		/* current height */
-	int palette;
-	int maxframesize;
-	int cframesize;		/* current framesize */
-
-	struct mutex lock;
-	int user;		/* user count for exclusive use */
-	int removed;		/* device disconnected */
-
-	int streaming;		/* Are we streaming video? */
-
-	char *fbuf;		/* Videodev buffer area */
-
-	struct urb *urb[SE401_NUMSBUF];
-	struct urb *inturb;
-
-	int button;
-	int buttonpressed;
-
-	int curframe;		/* Current receiving frame */
-	struct se401_frame frame[SE401_NUMFRAMES];
-	int readcount;
-	int framecount;
-	int error;
-	int dropped;
-
-	int scratch_next;
-	int scratch_use;
-	int scratch_overflow;
-	struct se401_scratch scratch[SE401_NUMSCRATCH];
-
-	/* Decoder specific data: */
-	unsigned char vlcdata[SE401_VLCDATALEN];
-	int vlcdatapos;
-	int bayeroffset;
-
-	struct se401_sbuf sbuf[SE401_NUMSBUF];
-
-	wait_queue_head_t wq;	/* Processes waiting */
-
-	int nullpackets;
-};
-
-
-
-#endif
-
-- 
cgit v1.2.3


From 0a58d713062fb49952b9b082514a48a0c83b269d Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 25 Dec 2010 08:01:38 -0300
Subject: [media] stk-webcam: remove V4L1 compatibility code, replace with V4L2
 controls

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/stk-webcam.c | 148 ++++++++-------------------------------
 1 file changed, 30 insertions(+), 118 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index b5afe5f841ce..d1a2cefbf55b 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -230,120 +230,6 @@ static int stk_initialise(struct stk_camera *dev)
 		return -1;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-
-/* sysfs functions */
-/*FIXME cleanup this */
-
-static ssize_t show_brightness(struct device *class,
-			struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%X\n", dev->vsettings.brightness);
-}
-
-static ssize_t store_brightness(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	char *endp;
-	unsigned long value;
-	int ret;
-
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	value = simple_strtoul(buf, &endp, 16);
-
-	dev->vsettings.brightness = (int) value;
-
-	ret = stk_sensor_set_brightness(dev, value >> 8);
-	if (ret)
-		return ret;
-	else
-		return count;
-}
-
-static ssize_t show_hflip(struct device *class,
-		struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%d\n", dev->vsettings.hflip);
-}
-
-static ssize_t store_hflip(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	if (strncmp(buf, "1", 1) == 0)
-		dev->vsettings.hflip = 1;
-	else if (strncmp(buf, "0", 1) == 0)
-		dev->vsettings.hflip = 0;
-	else
-		return -EINVAL;
-
-	return strlen(buf);
-}
-
-static ssize_t show_vflip(struct device *class,
-		struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%d\n", dev->vsettings.vflip);
-}
-
-static ssize_t store_vflip(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	if (strncmp(buf, "1", 1) == 0)
-		dev->vsettings.vflip = 1;
-	else if (strncmp(buf, "0", 1) == 0)
-		dev->vsettings.vflip = 0;
-	else
-		return -EINVAL;
-
-	return strlen(buf);
-}
-
-static DEVICE_ATTR(brightness, S_IRUGO | S_IWUGO,
-			show_brightness, store_brightness);
-static DEVICE_ATTR(hflip, S_IRUGO | S_IWUGO, show_hflip, store_hflip);
-static DEVICE_ATTR(vflip, S_IRUGO | S_IWUGO, show_vflip, store_vflip);
-
-static int stk_create_sysfs_files(struct video_device *vdev)
-{
-	int ret;
-
-	ret = device_create_file(&vdev->dev, &dev_attr_brightness);
-	ret += device_create_file(&vdev->dev, &dev_attr_hflip);
-	ret += device_create_file(&vdev->dev, &dev_attr_vflip);
-	if (ret)
-		STK_WARNING("Could not create sysfs files\n");
-	return ret;
-}
-
-static void stk_remove_sysfs_files(struct video_device *vdev)
-{
-	device_remove_file(&vdev->dev, &dev_attr_brightness);
-	device_remove_file(&vdev->dev, &dev_attr_hflip);
-	device_remove_file(&vdev->dev, &dev_attr_vflip);
-}
-
-#else
-#define stk_create_sysfs_files(a)
-#define stk_remove_sysfs_files(a)
-#endif
-
 /* *********************************************** */
 /*
  * This function is called as an URB transfert is complete (Isochronous pipe).
@@ -878,7 +764,24 @@ static struct v4l2_queryctrl stk_controls[] = {
 		.step    = 0x0100,
 		.default_value = 0x6000,
 	},
-	/*TODO: get more controls to work */
+	{
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Horizontal Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 1,
+	},
+	{
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vertical Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 1,
+	},
 };
 
 static int stk_vidioc_queryctrl(struct file *filp,
@@ -906,6 +809,12 @@ static int stk_vidioc_g_ctrl(struct file *filp,
 	case V4L2_CID_BRIGHTNESS:
 		c->value = dev->vsettings.brightness;
 		break;
+	case V4L2_CID_HFLIP:
+		c->value = dev->vsettings.hflip;
+		break;
+	case V4L2_CID_VFLIP:
+		c->value = dev->vsettings.vflip;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -920,6 +829,12 @@ static int stk_vidioc_s_ctrl(struct file *filp,
 	case V4L2_CID_BRIGHTNESS:
 		dev->vsettings.brightness = c->value;
 		return stk_sensor_set_brightness(dev, c->value >> 8);
+	case V4L2_CID_HFLIP:
+		dev->vsettings.hflip = c->value;
+		return 0;
+	case V4L2_CID_VFLIP:
+		dev->vsettings.vflip = c->value;
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -1394,8 +1309,6 @@ static int stk_camera_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	stk_create_sysfs_files(&dev->vdev);
-
 	return 0;
 
 error:
@@ -1411,7 +1324,6 @@ static void stk_camera_disconnect(struct usb_interface *interface)
 	unset_present(dev);
 
 	wake_up_interruptible(&dev->wait_frame);
-	stk_remove_sysfs_files(&dev->vdev);
 
 	STK_INFO("Syntek USB2.0 Camera release resources device %s\n",
 		 video_device_node_name(&dev->vdev));
-- 
cgit v1.2.3


From fa98447f09641adeeaf02b94133649f03b74d159 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 11 Dec 2010 12:31:45 -0300
Subject: [media] ivtv, cx18: Make ioremap failure messages more useful for
 users

The error messages these drivers emitted for ioremap() failures
were misleading and not helpful for users.  Reworded those messages
to help the user take action to resolve vmalloc address space
exhaustion.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-driver.c |  9 +++++++--
 drivers/media/video/ivtv/ivtv-driver.c | 28 ++++++++++++++++++++++------
 2 files changed, 29 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 98ac2e935743..676e5bef89eb 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -925,8 +925,13 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
 	cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
 				       CX18_MEM_SIZE);
 	if (!cx->enc_mem) {
-		CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		CX18_ERR("ioremap failed. Can't get a window into CX23418 "
+			 "memory and register space\n");
+		CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
+			 "vmalloc address space for the window\n");
+		CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		CX18_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index e421d15b0f5c..39946420b301 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1029,8 +1029,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
 				       IVTV_ENCODER_SIZE);
 	if (!itv->enc_mem) {
-		IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
+			 "encoder memory\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
+			 "vmalloc address space for this window\n");
+		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}
@@ -1041,8 +1046,14 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 		itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
 				IVTV_DECODER_SIZE);
 		if (!itv->dec_mem) {
-			IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-			IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+			IVTV_ERR("ioremap failed. Can't get a window into "
+				 "CX23415 decoder memory\n");
+			IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
+				 "of vmalloc address space for this window\n");
+			IVTV_ERR("Check the output of 'grep Vmalloc "
+				 "/proc/meminfo'\n");
+			IVTV_ERR("Use the vmalloc= kernel command line option "
+				 "to set VmallocTotal to a larger value\n");
 			retval = -ENOMEM;
 			goto free_mem;
 		}
@@ -1057,8 +1068,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	itv->reg_mem =
 	    ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	if (!itv->reg_mem) {
-		IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
+			 "register space\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
+			 "vmalloc address space for this window\n");
+		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_io;
 	}
-- 
cgit v1.2.3


From 754f9969c323559a12bce1475f3c1e6574129856 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 11 Dec 2010 20:38:20 -0300
Subject: [media] cx18: Only allocate a struct cx18_dvb for the DVB TS stream

The cx18_stream struct contained a struct cx18_dvb for
every stream object, most of which were for analog capture.
Now we only allocate the cx18_dvb object for the DTV TS stream.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-driver.h  |  9 ++++---
 drivers/media/video/cx18/cx18-dvb.c     | 32 +++++++++++++----------
 drivers/media/video/cx18/cx18-mailbox.c |  6 ++---
 drivers/media/video/cx18/cx18-streams.c | 45 +++++++++++++++++++++++----------
 drivers/media/video/cx18/cx18-streams.h |  3 ++-
 5 files changed, 60 insertions(+), 35 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index cf4f20e91858..f6f3e50d4bdf 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -325,7 +325,10 @@ struct cx18_queue {
 	spinlock_t lock;
 };
 
+struct cx18_stream; /* forward reference */
+
 struct cx18_dvb {
+	struct cx18_stream *stream;
 	struct dmx_frontend hw_frontend;
 	struct dmx_frontend mem_frontend;
 	struct dmxdev dmxdev;
@@ -365,9 +368,10 @@ struct cx18_in_work_order {
 #define CX18_INVALID_TASK_HANDLE 0xffffffff
 
 struct cx18_stream {
-	/* These first four fields are always set, even if the stream
+	/* These first five fields are always set, even if the stream
 	   is not actually created. */
 	struct video_device *video_dev;	/* NULL when stream not created */
+	struct cx18_dvb *dvb;		/* DVB / Digital Transport */
 	struct cx18 *cx; 		/* for ease of use */
 	const char *name;		/* name of the stream */
 	int type;			/* stream type */
@@ -397,9 +401,6 @@ struct cx18_stream {
 	struct cx18_queue q_idle;	/* idle - not in rotation */
 
 	struct work_struct out_work_order;
-
-	/* DVB / Digital Transport */
-	struct cx18_dvb dvb;
 };
 
 struct cx18_open_id {
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index c7f0bad39ad0..f0381d62518d 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -137,7 +137,7 @@ static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
 {
 	struct cx18_dvb *dvb = container_of(fe->dvb,
 					    struct cx18_dvb, dvb_adapter);
-	struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+	struct cx18_stream *stream = dvb->stream;
 	const struct firmware *fw = NULL;
 	int ret;
 	int i;
@@ -266,22 +266,22 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 	if (!demux->dmx.frontend)
 		return -EINVAL;
 
-	mutex_lock(&stream->dvb.feedlock);
-	if (stream->dvb.feeding++ == 0) {
+	mutex_lock(&stream->dvb->feedlock);
+	if (stream->dvb->feeding++ == 0) {
 		CX18_DEBUG_INFO("Starting Transport DMA\n");
 		mutex_lock(&cx->serialize_lock);
 		set_bit(CX18_F_S_STREAMING, &stream->s_flags);
 		ret = cx18_start_v4l2_encode_stream(stream);
 		if (ret < 0) {
 			CX18_DEBUG_INFO("Failed to start Transport DMA\n");
-			stream->dvb.feeding--;
-			if (stream->dvb.feeding == 0)
+			stream->dvb->feeding--;
+			if (stream->dvb->feeding == 0)
 				clear_bit(CX18_F_S_STREAMING, &stream->s_flags);
 		}
 		mutex_unlock(&cx->serialize_lock);
 	} else
 		ret = 0;
-	mutex_unlock(&stream->dvb.feedlock);
+	mutex_unlock(&stream->dvb->feedlock);
 
 	return ret;
 }
@@ -299,15 +299,15 @@ static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
 		CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
 				feed->pid, feed->index);
 
-		mutex_lock(&stream->dvb.feedlock);
-		if (--stream->dvb.feeding == 0) {
+		mutex_lock(&stream->dvb->feedlock);
+		if (--stream->dvb->feeding == 0) {
 			CX18_DEBUG_INFO("Stopping Transport DMA\n");
 			mutex_lock(&cx->serialize_lock);
 			ret = cx18_stop_v4l2_encode_stream(stream, 0);
 			mutex_unlock(&cx->serialize_lock);
 		} else
 			ret = 0;
-		mutex_unlock(&stream->dvb.feedlock);
+		mutex_unlock(&stream->dvb->feedlock);
 	}
 
 	return ret;
@@ -316,7 +316,7 @@ static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
 int cx18_dvb_register(struct cx18_stream *stream)
 {
 	struct cx18 *cx = stream->cx;
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct dvb_adapter *dvb_adapter;
 	struct dvb_demux *dvbdemux;
 	struct dmx_demux *dmx;
@@ -325,6 +325,9 @@ int cx18_dvb_register(struct cx18_stream *stream)
 	if (!dvb)
 		return -EINVAL;
 
+	dvb->enabled = 0;
+	dvb->stream = stream;
+
 	ret = dvb_register_adapter(&dvb->dvb_adapter,
 			CX18_DRIVER_NAME,
 			THIS_MODULE, &cx->pci_dev->dev, adapter_nr);
@@ -378,7 +381,7 @@ int cx18_dvb_register(struct cx18_stream *stream)
 
 	CX18_INFO("DVB Frontend registered\n");
 	CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n",
-		  stream->dvb.dvb_adapter.num, stream->name,
+		  stream->dvb->dvb_adapter.num, stream->name,
 		  stream->buffers, stream->buf_size/1024,
 		  (stream->buf_size * 100 / 1024) % 100);
 
@@ -405,13 +408,16 @@ err_out:
 void cx18_dvb_unregister(struct cx18_stream *stream)
 {
 	struct cx18 *cx = stream->cx;
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct dvb_adapter *dvb_adapter;
 	struct dvb_demux *dvbdemux;
 	struct dmx_demux *dmx;
 
 	CX18_INFO("unregister DVB\n");
 
+	if (dvb == NULL || !dvb->enabled)
+		return;
+
 	dvb_adapter = &dvb->dvb_adapter;
 	dvbdemux = &dvb->demux;
 	dmx = &dvbdemux->dmx;
@@ -432,7 +438,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream)
  */
 static int dvb_register(struct cx18_stream *stream)
 {
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct cx18 *cx = stream->cx;
 	int ret = 0;
 
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 956aa190ecca..c545f3beef78 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -136,7 +136,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 {
 	struct cx18_buffer *buf;
 
-	if (!s->dvb.enabled || mdl->bytesused == 0)
+	if (s->dvb == NULL || !s->dvb->enabled || mdl->bytesused == 0)
 		return;
 
 	/* We ignore mdl and buf readpos accounting here - it doesn't matter */
@@ -146,7 +146,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 		buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
 				       list);
 		if (buf->bytesused)
-			dvb_dmx_swfilter(&s->dvb.demux,
+			dvb_dmx_swfilter(&s->dvb->demux,
 					 buf->buf, buf->bytesused);
 		return;
 	}
@@ -154,7 +154,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 	list_for_each_entry(buf, &mdl->buf_list, list) {
 		if (buf->bytesused == 0)
 			break;
-		dvb_dmx_swfilter(&s->dvb.demux, buf->buf, buf->bytesused);
+		dvb_dmx_swfilter(&s->dvb->demux, buf->buf, buf->bytesused);
 	}
 }
 
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index ab461e27d9dd..94f5d7967c5c 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -107,6 +107,7 @@ static void cx18_stream_init(struct cx18 *cx, int type)
 	s->video_dev = video_dev;
 
 	/* initialize cx18_stream fields */
+	s->dvb = NULL;
 	s->cx = cx;
 	s->type = type;
 	s->name = cx18_stream_info[type].name;
@@ -140,10 +141,15 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 	int num_offset = cx18_stream_info[type].num_offset;
 	int num = cx->instance + cx18_first_minor + num_offset;
 
-	/* These four fields are always initialized. If video_dev == NULL, then
-	   this stream is not in use. In that case no other fields but these
-	   four can be used. */
+	/*
+	 * These five fields are always initialized.
+	 * For analog capture related streams, if video_dev == NULL then the
+	 * stream is not in use.
+	 * For the TS stream, if dvb == NULL then the stream is not in use.
+	 * In those cases no other fields but these four can be used.
+	 */
 	s->video_dev = NULL;
+	s->dvb = NULL;
 	s->cx = cx;
 	s->type = type;
 	s->name = cx18_stream_info[type].name;
@@ -167,6 +173,21 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 
 	cx18_stream_init(cx, type);
 
+	/* Allocate the cx18_dvb struct only for the TS on cards with DTV */
+	if (type == CX18_ENC_STREAM_TYPE_TS) {
+		if (cx->card->hw_all & CX18_HW_DVB) {
+			s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
+			if (s->dvb == NULL) {
+				CX18_ERR("Couldn't allocate cx18_dvb structure"
+					 " for %s\n", s->name);
+				return -ENOMEM;
+			}
+		} else {
+			/* Don't need buffers for the TS, if there is no DVB */
+			s->buffers = 0;
+		}
+	}
+
 	if (num_offset == -1)
 		return 0;
 
@@ -222,13 +243,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
 	const char *name;
 	int num, ret;
 
-	/* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something?
-	 * We need a VFL_TYPE_TS defined.
-	 */
-	if (strcmp("TS", s->name) == 0) {
-		/* just return if no DVB is supported */
-		if ((cx->card->hw_all & CX18_HW_DVB) == 0)
-			return 0;
+	if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) {
 		ret = cx18_dvb_register(s);
 		if (ret < 0) {
 			CX18_ERR("DVB failed to register\n");
@@ -320,11 +335,13 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister)
 	/* Teardown all streams */
 	for (type = 0; type < CX18_MAX_STREAMS; type++) {
 
-		/* No struct video_device, but can have buffers allocated */
+		/* The TS has a cx18_dvb structure, not a video_device */
 		if (type == CX18_ENC_STREAM_TYPE_TS) {
-			if (cx->streams[type].dvb.enabled) {
-				cx18_dvb_unregister(&cx->streams[type]);
-				cx->streams[type].dvb.enabled = false;
+			if (cx->streams[type].dvb != NULL) {
+				if (unregister)
+					cx18_dvb_unregister(&cx->streams[type]);
+				kfree(cx->streams[type].dvb);
+				cx->streams[type].dvb = NULL;
 				cx18_stream_free(&cx->streams[type]);
 			}
 			continue;
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 77412bee5963..51765eb12d39 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -33,7 +33,8 @@ void cx18_stream_rotate_idx_mdls(struct cx18 *cx);
 
 static inline bool cx18_stream_enabled(struct cx18_stream *s)
 {
-	return s->video_dev || s->dvb.enabled ||
+	return s->video_dev ||
+	       (s->dvb && s->dvb->enabled) ||
 	       (s->type == CX18_ENC_STREAM_TYPE_IDX &&
 		s->cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] != 0);
 }
-- 
cgit v1.2.3


From b0c45686c8e8aecc7b0cd04d9b6af48d74418d53 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sat, 18 Dec 2010 10:48:17 -0300
Subject: [media] ivtv: ivtv_write_vbi() should use copy_from_user() for user
 data buffers

ivtv_write_vbi() is used for both VBI data that came from the
driver internally and VBI data that came from the user.  However,
it did not use copy_from_user() for reading the VBI data from the
user buffers.

This change adds a new version of the function,
ivtv_write_vbi_from_user(), that uses copy_from_user() to read the VBI
data provided via user buffers.

This should resolve a sparse build warning reported by Dave Gilbert.

Reported-by: Dr. David Alan Gilbert <linux at treblig.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-fileops.c |   3 +-
 drivers/media/video/ivtv/ivtv-vbi.c     | 109 +++++++++++++++++++++-----------
 drivers/media/video/ivtv/ivtv-vbi.h     |   4 +-
 3 files changed, 78 insertions(+), 38 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index d727485da886..4f46b0070806 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -570,7 +570,8 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c
 		int elems = count / sizeof(struct v4l2_sliced_vbi_data);
 
 		set_bit(IVTV_F_S_APPL_IO, &s->s_flags);
-		ivtv_write_vbi(itv, (const struct v4l2_sliced_vbi_data *)user_buf, elems);
+		ivtv_write_vbi_from_user(itv,
+		   (const struct v4l2_sliced_vbi_data __user *)user_buf, elems);
 		return elems * sizeof(struct v4l2_sliced_vbi_data);
 	}
 
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index e1c347e5ebd8..7275f2d6597e 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -92,54 +92,91 @@ static int odd_parity(u8 c)
 	return c & 1;
 }
 
-void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t cnt)
+static void ivtv_write_vbi_line(struct ivtv *itv,
+				const struct v4l2_sliced_vbi_data *d,
+				struct vbi_cc *cc, int *found_cc)
 {
 	struct vbi_info *vi = &itv->vbi;
-	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
-	int found_cc = 0;
-	size_t i;
-
-	for (i = 0; i < cnt; i++) {
-		const struct v4l2_sliced_vbi_data *d = sliced + i;
 
-		if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) {
-			if (d->field) {
-				cc.even[0] = d->data[0];
-				cc.even[1] = d->data[1];
-			} else {
-				cc.odd[0] = d->data[0];
-				cc.odd[1] = d->data[1];
-			}
-			found_cc = 1;
+	if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) {
+		if (d->field) {
+			cc->even[0] = d->data[0];
+			cc->even[1] = d->data[1];
+		} else {
+			cc->odd[0] = d->data[0];
+			cc->odd[1] = d->data[1];
 		}
-		else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) {
-			struct vbi_vps vps;
-
-			vps.data[0] = d->data[2];
-			vps.data[1] = d->data[8];
-			vps.data[2] = d->data[9];
-			vps.data[3] = d->data[10];
-			vps.data[4] = d->data[11];
-			if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) {
-				vi->vps_payload = vps;
-				set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
-			}
+		*found_cc = 1;
+	} else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) {
+		struct vbi_vps vps;
+
+		vps.data[0] = d->data[2];
+		vps.data[1] = d->data[8];
+		vps.data[2] = d->data[9];
+		vps.data[3] = d->data[10];
+		vps.data[4] = d->data[11];
+		if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) {
+			vi->vps_payload = vps;
+			set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
 		}
-		else if (d->id == V4L2_SLICED_WSS_625 && d->line == 23 && d->field == 0) {
-			int wss = d->data[0] | d->data[1] << 8;
+	} else if (d->id == V4L2_SLICED_WSS_625 &&
+		   d->line == 23 && d->field == 0) {
+		int wss = d->data[0] | d->data[1] << 8;
 
-			if (vi->wss_payload != wss) {
-				vi->wss_payload = wss;
-				set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
-			}
+		if (vi->wss_payload != wss) {
+			vi->wss_payload = wss;
+			set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
 		}
 	}
-	if (found_cc && vi->cc_payload_idx < ARRAY_SIZE(vi->cc_payload)) {
-		vi->cc_payload[vi->cc_payload_idx++] = cc;
+}
+
+static void ivtv_write_vbi_cc_lines(struct ivtv *itv, const struct vbi_cc *cc)
+{
+	struct vbi_info *vi = &itv->vbi;
+
+	if (vi->cc_payload_idx < ARRAY_SIZE(vi->cc_payload)) {
+		memcpy(&vi->cc_payload[vi->cc_payload_idx], cc,
+		       sizeof(struct vbi_cc));
+		vi->cc_payload_idx++;
 		set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
 	}
 }
 
+static void ivtv_write_vbi(struct ivtv *itv,
+			   const struct v4l2_sliced_vbi_data *sliced,
+			   size_t cnt)
+{
+	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
+	int found_cc = 0;
+	size_t i;
+
+	for (i = 0; i < cnt; i++)
+		ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc);
+
+	if (found_cc)
+		ivtv_write_vbi_cc_lines(itv, &cc);
+}
+
+void ivtv_write_vbi_from_user(struct ivtv *itv,
+			      const struct v4l2_sliced_vbi_data __user *sliced,
+			      size_t cnt)
+{
+	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
+	int found_cc = 0;
+	size_t i;
+	struct v4l2_sliced_vbi_data d;
+
+	for (i = 0; i < cnt; i++) {
+		if (copy_from_user(&d, sliced + i,
+				   sizeof(struct v4l2_sliced_vbi_data)))
+			break;
+		ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc);
+	}
+
+	if (found_cc)
+		ivtv_write_vbi_cc_lines(itv, &cc);
+}
+
 static void copy_vbi_data(struct ivtv *itv, int lines, u32 pts_stamp)
 {
 	int line = 0;
diff --git a/drivers/media/video/ivtv/ivtv-vbi.h b/drivers/media/video/ivtv/ivtv-vbi.h
index 970567b9194d..eda38d0ad7ce 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.h
+++ b/drivers/media/video/ivtv/ivtv-vbi.h
@@ -20,7 +20,9 @@
 #ifndef IVTV_VBI_H
 #define IVTV_VBI_H
 
-void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t count);
+void ivtv_write_vbi_from_user(struct ivtv *itv,
+			      const struct v4l2_sliced_vbi_data __user *sliced,
+			      size_t count);
 void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
 			   u64 pts_stamp, int streamtype);
 int ivtv_used_line(struct ivtv *itv, int line, int field);
-- 
cgit v1.2.3


From ddda424999817fbc17adf9013feb066903382ede Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Sun, 19 Dec 2010 21:59:56 -0300
Subject: [media] ivtv: Return EFAULT when copy_from_user() fails in
 ivtv_write_vbi_from_user()

If write() on a VBI device node fails due to a bad buffer pointer from
userspace, we should notify the application properly with EFAULT, per the
V4L2 API spec.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-fileops.c |  3 +--
 drivers/media/video/ivtv/ivtv-vbi.c     | 14 ++++++++++----
 drivers/media/video/ivtv/ivtv-vbi.h     |  7 ++++---
 3 files changed, 15 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index 4f46b0070806..c57a58523ca8 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -570,9 +570,8 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c
 		int elems = count / sizeof(struct v4l2_sliced_vbi_data);
 
 		set_bit(IVTV_F_S_APPL_IO, &s->s_flags);
-		ivtv_write_vbi_from_user(itv,
+		return ivtv_write_vbi_from_user(itv,
 		   (const struct v4l2_sliced_vbi_data __user *)user_buf, elems);
-		return elems * sizeof(struct v4l2_sliced_vbi_data);
 	}
 
 	mode = s->type == IVTV_DEC_STREAM_TYPE_MPG ? OUT_MPG : OUT_YUV;
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index 7275f2d6597e..2dfa957b0fd5 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -157,24 +157,30 @@ static void ivtv_write_vbi(struct ivtv *itv,
 		ivtv_write_vbi_cc_lines(itv, &cc);
 }
 
-void ivtv_write_vbi_from_user(struct ivtv *itv,
-			      const struct v4l2_sliced_vbi_data __user *sliced,
-			      size_t cnt)
+ssize_t
+ivtv_write_vbi_from_user(struct ivtv *itv,
+			 const struct v4l2_sliced_vbi_data __user *sliced,
+			 size_t cnt)
 {
 	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
 	int found_cc = 0;
 	size_t i;
 	struct v4l2_sliced_vbi_data d;
+	ssize_t ret = cnt * sizeof(struct v4l2_sliced_vbi_data);
 
 	for (i = 0; i < cnt; i++) {
 		if (copy_from_user(&d, sliced + i,
-				   sizeof(struct v4l2_sliced_vbi_data)))
+				   sizeof(struct v4l2_sliced_vbi_data))) {
+			ret = -EFAULT;
 			break;
+		}
 		ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc);
 	}
 
 	if (found_cc)
 		ivtv_write_vbi_cc_lines(itv, &cc);
+
+	return ret;
 }
 
 static void copy_vbi_data(struct ivtv *itv, int lines, u32 pts_stamp)
diff --git a/drivers/media/video/ivtv/ivtv-vbi.h b/drivers/media/video/ivtv/ivtv-vbi.h
index eda38d0ad7ce..166dd0b75d0f 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.h
+++ b/drivers/media/video/ivtv/ivtv-vbi.h
@@ -20,9 +20,10 @@
 #ifndef IVTV_VBI_H
 #define IVTV_VBI_H
 
-void ivtv_write_vbi_from_user(struct ivtv *itv,
-			      const struct v4l2_sliced_vbi_data __user *sliced,
-			      size_t count);
+ssize_t
+ivtv_write_vbi_from_user(struct ivtv *itv,
+			 const struct v4l2_sliced_vbi_data __user *sliced,
+			 size_t count);
 void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
 			   u64 pts_stamp, int streamtype);
 int ivtv_used_line(struct ivtv *itv, int line, int field);
-- 
cgit v1.2.3


From 58c66df3e38ffb1d59cc5162bb9e07c859288034 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 07:38:48 -0300
Subject: [media] Remove VIDEO_V4L1 Kconfig option

There's no sense on keeping VIDEO_V4L1 Kconfig option just because of
two deprecated drivers moved to staging scheduled to die on 2.6.39.

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/Kconfig       | 14 --------------
 drivers/media/video/Kconfig |  5 -----
 2 files changed, 19 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 9ea1a6d70f0a..147c92b9b4f6 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -40,20 +40,6 @@ config VIDEO_V4L2_COMMON
 	depends on (I2C || I2C=n) && VIDEO_DEV
 	default (I2C || I2C=n) && VIDEO_DEV
 
-config VIDEO_ALLOW_V4L1
-	bool "Enable Video For Linux API 1 (DEPRECATED)"
-	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
-	default VIDEO_DEV && VIDEO_V4L2_COMMON
-	---help---
-	  Enables drivers based on the legacy V4L1 API.
-
-	  This api were developed to be used at Kernel 2.2 and 2.4, but
-	  lacks support for several video standards. There are several
-	  drivers at kernel that still depends on it.
-
-	  If you are unsure as to whether this is required, answer Y.
-
-
 #
 # DVB Core
 #
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index b3bf04368bf2..78b8c5de1f6b 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -7,11 +7,6 @@ config VIDEO_V4L2
 	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
 	default VIDEO_DEV && VIDEO_V4L2_COMMON
 
-config VIDEO_V4L1
-	tristate
-	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
-	default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
-
 config VIDEOBUF_GEN
 	tristate
 
-- 
cgit v1.2.3


From 88ae7624a6fe890e5a8ca57b25420f66e1389f8b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 07:47:54 -0300
Subject: [media] V4L1 removal: Remove linux/videodev.h

There's no sense on keeping it on 2.6.38, as nobody is using it
anymore, at the kernel tree, and installing it at the userspace
API.

As two deprecated drivers still need it, move it to their internal
directories.

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-compat-ioctl32.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 425ac1e4a00e..65e6f133dd35 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -15,7 +15,6 @@
 
 #include <linux/compat.h>
 #define __OLD_VIDIOC_ /* To allow fixing old calls*/
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
 #include <media/v4l2-ioctl.h>
-- 
cgit v1.2.3


From 22efe507705a8437255114f98d0d514524460be0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 08:30:34 -0300
Subject: [media] omap_vout: Remove an obsolete comment

This comment mentions a field that doesn't exist, and talks about
videodev.h that got removed. So, it doesn't make any sense to keep
it.

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/omap/omap_vout.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 15f8793e325b..83de97ad971e 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -2230,7 +2230,6 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 
 	strlcpy(vfd->name, VOUT_NAME, sizeof(vfd->name));
 
-	/* need to register for a VID_HARDWARE_* ID in videodev.h */
 	vfd->fops = &omap_vout_fops;
 	vfd->v4l2_dev = &vout->vid_dev->v4l2_dev;
 	mutex_init(&vout->lock);
-- 
cgit v1.2.3


From 9ae2ae35f8a8a13997b9ec719ae7c151a2182e80 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 11:41:14 -0300
Subject: [media] dmxdev: Fix a compilation warning due to a bad type
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/dvb/dvb-core/dmxdev.c: In function ‘dvb_dmxdev_start_feed’:
drivers/media/dvb/dvb-core/dmxdev.c:583:13: warning: comparison between ‘enum dmx_ts_pes’ and ‘enum <anonymous>’

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dmxdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index ad1f61d301e1..e4b5c03ae516 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -572,13 +572,13 @@ static int dvb_dmxdev_start_feed(struct dmxdev *dmxdev,
 	dmx_output_t otype;
 	int ret;
 	int ts_type;
-	enum dmx_ts_pes ts_pes;
+	dmx_pes_type_t ts_pes;
 	struct dmx_ts_feed *tsfeed;
 
 	feed->ts = NULL;
 	otype = para->output;
 
-	ts_pes = (enum dmx_ts_pes)para->pes_type;
+	ts_pes = para->pes_type;
 
 	if (ts_pes < DMX_PES_OTHER)
 		ts_type = TS_DECODER;
-- 
cgit v1.2.3


From fce50ac80e38b1d205939ff7d4777536701263a6 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 11:44:50 -0300
Subject: [media] radio-wl1273: Fix two warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/radio/radio-wl1273.c: In function ‘wl1273_fm_upload_firmware_patch’:
drivers/media/radio/radio-wl1273.c:675:2: warning: ‘n’ may be used uninitialized in this function
drivers/media/radio/radio-wl1273.c:675:2: warning: ‘i’ may be used uninitialized in this function

Those vars are never initialized, and the debug message makes no sense, as it
will show just two random values.

Cc: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/radio-wl1273.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 1813790b8e9b..dd6bd364efa0 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -645,7 +645,7 @@ static int wl1273_fm_upload_firmware_patch(struct wl1273_device *radio)
 	const char *fw_name = "radio-wl1273-fw.bin";
 	struct device *dev = radio->dev;
 	__u8 *ptr;
-	int i, n, r;
+	int r;
 
 	dev_dbg(dev, "%s:\n", __func__);
 
@@ -672,7 +672,6 @@ static int wl1273_fm_upload_firmware_patch(struct wl1273_device *radio)
 	/* ignore possible error here */
 	wl1273_fm_write_cmd(core, WL1273_RESET, 0);
 
-	dev_dbg(dev, "n: %d, i: %d\n", n, i);
 	dev_dbg(dev, "%s - download OK, r: %d\n", __func__, r);
 out:
 	release_firmware(fw_p);
-- 
cgit v1.2.3


From 2e94b53c55d00b4d4d4b9e65007566f7fbffab7a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 11:55:07 -0300
Subject: [media] dib7000m/dib7000p: Add support for TRANSMISSION_MODE_4K
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixes several warnings:

drivers/media/dvb/frontends/dib7000m.c: In function ‘dib7000m_set_channel’:
drivers/media/dvb/frontends/dib7000m.c:808:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:869:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c: In function ‘dib7000m_tune’:
drivers/media/dvb/frontends/dib7000m.c:1023:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:1033:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000m.c:1043:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c: In function ‘dib7000p_set_channel’:
drivers/media/dvb/frontends/dib7000p.c:720:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:773:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c: In function ‘dib7000p_tune’:
drivers/media/dvb/frontends/dib7000p.c:997:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:1007:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’
drivers/media/dvb/frontends/dib7000p.c:1017:3: warning: case value ‘255’ not in enumerated type ‘fe_transmit_mode_t’

The drivers were prepared to support 4K carriers, but as the define were added
later, they were using a "magic" value of 255.

Cc: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/dib7000m.c | 10 +++++-----
 drivers/media/dvb/frontends/dib7000p.c | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index 0f09fd31cb29..c7f5ccf54aa5 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -805,7 +805,7 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_fronte
 	value = 0;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		case /* 4K MODE */ 255: value |= (2 << 7); break;
+		case TRANSMISSION_MODE_4K: value |= (2 << 7); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
 	}
@@ -866,7 +866,7 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_fronte
 	/* P_dvsy_sync_wait */
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_8K: value = 256; break;
-		case /* 4K MODE */ 255: value = 128; break;
+		case TRANSMISSION_MODE_4K: value = 128; break;
 		case TRANSMISSION_MODE_2K:
 		default: value = 64; break;
 	}
@@ -1020,7 +1020,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (6 << 8) | 0x80;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (7 << 12); break;
-		case /* 4K MODE */ 255: value |= (8 << 12); break;
+		case TRANSMISSION_MODE_4K: value |= (8 << 12); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (9 << 12); break;
 	}
@@ -1030,7 +1030,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case /* 4K MODE */ 255: value |= 0x7; break;
+		case TRANSMISSION_MODE_4K: value |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= 0x8; break;
 	}
@@ -1040,7 +1040,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case /* 4K MODE */ 255: value |= 0x7; break;
+		case TRANSMISSION_MODE_4K: value |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= 0x8; break;
 	}
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 3aed0d433921..6aa02cb80733 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -717,7 +717,7 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 	value = 0;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		case /* 4K MODE */ 255: value |= (2 << 7); break;
+		case TRANSMISSION_MODE_4K: value |= (2 << 7); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
 	}
@@ -770,7 +770,7 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 	/* P_dvsy_sync_wait */
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_8K: value = 256; break;
-		case /* 4K MODE */ 255: value = 128; break;
+		case TRANSMISSION_MODE_4K: value = 128; break;
 		case TRANSMISSION_MODE_2K:
 		default: value = 64; break;
 	}
@@ -994,7 +994,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (6 << 8) | 0x80;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= (7 << 12); break;
-		case /* 4K MODE */ 255: tmp |= (8 << 12); break;
+		case TRANSMISSION_MODE_4K: tmp |= (8 << 12); break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= (9 << 12); break;
 	}
@@ -1004,7 +1004,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
-		case /* 4K MODE */ 255: tmp |= 0x7; break;
+		case TRANSMISSION_MODE_4K: tmp |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
 	}
@@ -1014,7 +1014,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
-		case /* 4K MODE */ 255: tmp |= 0x7; break;
+		case TRANSMISSION_MODE_4K: tmp |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
 	}
-- 
cgit v1.2.3


From 95f18be2e4f74255b46fcc23a9718cca9c7375c9 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 12:00:03 -0300
Subject: [media] gspca: Fix a warning for using len before filling it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The check for status errors is now before the check for len. That's
ok. However, the error printk's for the status error prints the URB
length. This generates this error:

drivers/media/video/gspca/gspca.c: In function ‘fill_frame’:
drivers/media/video/gspca/gspca.c:305:9: warning: ‘len’ may be used uninitialized in this function

The fix is as simple as moving the len init to happen before the checks.

Cc: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 92b5dfb12ed1..80b31ebb5b95 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -318,6 +318,7 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	}
 	pkt_scan = gspca_dev->sd_desc->pkt_scan;
 	for (i = 0; i < urb->number_of_packets; i++) {
+		len = urb->iso_frame_desc[i].actual_length;
 
 		/* check the packet status and length */
 		st = urb->iso_frame_desc[i].status;
@@ -327,7 +328,6 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 			gspca_dev->last_packet_type = DISCARD_PACKET;
 			continue;
 		}
-		len = urb->iso_frame_desc[i].actual_length;
 		if (len == 0) {
 			if (gspca_dev->empty_packet == 0)
 				gspca_dev->empty_packet = 1;
-- 
cgit v1.2.3


From 187e7d3b9b4e0b6b1c171846592e679e58a84cd2 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 12:16:47 -0300
Subject: [media] stv090x: Fix some compilation warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A few typos at the driver are causing the following warnings:

drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_start_search’:
drivers/media/dvb/frontends/stv090x.c:1486:27: warning: comparison between ‘enum stv090x_search’ and ‘enum stv090x_delsys’
drivers/media/dvb/frontends/stv090x.c:1487:24: warning: comparison between ‘enum stv090x_search’ and ‘enum stv090x_delsys’
drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_optimize_track’:
drivers/media/dvb/frontends/stv090x.c:2943:2: warning: case value ‘4’ not in enumerated type ‘enum stv090x_delsys’

The first two are due to the lack of using the delsys types
	STV090x_DVBS1/STV090x_DSS
instead of
	STV090x_SEARCH_DVBS1/STV090x_SEARCH_DSS

The second one is due to the usage of STV090x_UNKNOWN (enum stv090x_modulation)
instead of STV090x_ERROR (enum stv090x_delsys).

Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/stv090x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 425e7a43ae19..4e0fc2c8a41c 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -1483,8 +1483,8 @@ static int stv090x_start_search(struct stv090x_state *state)
 		if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
 			goto err;
 
-		if ((state->search_mode == STV090x_DVBS1)	||
-			(state->search_mode == STV090x_DSS)	||
+		if ((state->search_mode == STV090x_SEARCH_DVBS1)	||
+			(state->search_mode == STV090x_SEARCH_DSS)	||
 			(state->search_mode == STV090x_SEARCH_AUTO)) {
 
 			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
@@ -2940,7 +2940,7 @@ static int stv090x_optimize_track(struct stv090x_state *state)
 		STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67); /* PER */
 		break;
 
-	case STV090x_UNKNOWN:
+	case STV090x_ERROR:
 	default:
 		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
 		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
-- 
cgit v1.2.3


From 465a9e3a2f494b0887db63b7b10bb9370145d9bc Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 12:58:02 -0300
Subject: [media] af9013: Fix a compilation warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_signal_strength.clone.0’:
drivers/media/dvb/frontends/af9013.c:967:6: warning: ‘ret’ may be used uninitialized in this function

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/af9013.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index e2a95c07bab4..ce222055526d 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -964,7 +964,7 @@ error:
 static int af9013_update_signal_strength(struct dvb_frontend *fe)
 {
 	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
+	int ret = 0;
 	u8 rf_gain, if_gain;
 	int signal_strength;
 
-- 
cgit v1.2.3


From 0170f6bcb243cb9e86c953652f8e62fccb8108f1 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 13:00:04 -0300
Subject: [media] streamzap: Fix a compilation warning when compiled builtin
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/rc/streamzap.c: In function ‘streamzap_probe’:
drivers/media/rc/streamzap.c:460:2: warning: statement with no effect

Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/streamzap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 7f82f55159da..6e2911c2abfb 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -73,7 +73,7 @@ MODULE_DEVICE_TABLE(usb, streamzap_table);
 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
 #define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
 #else
-#define load_rc5_sz_decode()    0
+#define load_rc5_sz_decode()    {}
 #endif
 
 enum StreamzapDecoderState {
-- 
cgit v1.2.3


From 2d5ca76f2b39a31313d7e54224c78b7b311e7dce Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 27 Dec 2010 18:17:12 -0300
Subject: [media] dabusb: Move it to staging to be deprecated

dabusb driver were conceived as an experimental driver for a test
device. The driver never supported any shipped product, and, while
there were some updates on it in 2003, for an ancient product,
those changes were never submitted upstream.

Also, there's no DocBook for its API, nor any upstream discussion.

So, better to remove it, on .39. If later needed, we may rescue it
from git logs. For now, let's move it to staging.

Acked-by: Deti Fliegl <deti@fliegl.de>
Cc: Deti Fliegl <deti@fliegl.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/Kconfig        |  22 --
 drivers/media/video/Makefile |   1 -
 drivers/media/video/dabusb.c | 914 -------------------------------------------
 drivers/media/video/dabusb.h |  85 ----
 4 files changed, 1022 deletions(-)
 delete mode 100644 drivers/media/video/dabusb.c
 delete mode 100644 drivers/media/video/dabusb.h

(limited to 'drivers/media')

diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 147c92b9b4f6..81b3ba83cc65 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -92,26 +92,4 @@ source "drivers/media/radio/Kconfig"
 
 source "drivers/media/dvb/Kconfig"
 
-config DAB
-	boolean "DAB adapters"
-	---help---
-	  Allow selecting support for Digital Audio Broadcasting (DAB)
-	  Receiver adapters.
-
-if DAB
-config USB_DABUSB
-	tristate "DABUSB driver"
-	depends on USB
-	---help---
-	  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
-	  brought to you by the DAB-Team
-	  <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
-	  as an example for URB-based bulk, control, and isochronous
-	  transactions. URB's are explained in
-	  <Documentation/usb/URB.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dabusb.
-endif # DAB
-
 endif # MEDIA_SUPPORT
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index fd684dd4f91c..98825e7d8ca4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -121,7 +121,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
-obj-$(CONFIG_USB_DABUSB)        += dabusb.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
 obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
deleted file mode 100644
index f3e25e91366d..000000000000
--- a/drivers/media/video/dabusb.c
+++ /dev/null
@@ -1,914 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      dabusb.c  --  dab usb driver.
- *
- *      Copyright (C) 1999  Deti Fliegl (deti@fliegl.de)
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *
- *  $Id: dabusb.c,v 1.54 2000/07/24 21:39:39 deti Exp $
- *
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/socket.h>
-#include <linux/list.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/atomic.h>
-#include <linux/delay.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
-
-#include "dabusb.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.54"
-#define DRIVER_AUTHOR "Deti Fliegl, deti@fliegl.de"
-#define DRIVER_DESC "DAB-USB Interface Driver for Linux (c)1999"
-
-/* --------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_DYNAMIC_MINORS
-#define NRDABUSB 256
-#else
-#define NRDABUSB 4
-#endif
-
-/*-------------------------------------------------------------------*/
-
-static dabusb_t dabusb[NRDABUSB];
-static int buffers = 256;
-static struct usb_driver dabusb_driver;
-
-/*-------------------------------------------------------------------*/
-
-static int dabusb_add_buf_tail (pdabusb_t s, struct list_head *dst, struct list_head *src)
-{
-	unsigned long flags;
-	struct list_head *tmp;
-	int ret = 0;
-
-	spin_lock_irqsave (&s->lock, flags);
-
-	if (list_empty (src)) {
-		// no elements in source buffer
-		ret = -1;
-		goto err;
-	}
-	tmp = src->next;
-	list_move_tail (tmp, dst);
-
-  err:	spin_unlock_irqrestore (&s->lock, flags);
-	return ret;
-}
-/*-------------------------------------------------------------------*/
-#ifdef DEBUG
-static void dump_urb (struct urb *urb)
-{
-	dbg("urb                   :%p", urb);
-	dbg("dev                   :%p", urb->dev);
-	dbg("pipe                  :%08X", urb->pipe);
-	dbg("status                :%d", urb->status);
-	dbg("transfer_flags        :%08X", urb->transfer_flags);
-	dbg("transfer_buffer       :%p", urb->transfer_buffer);
-	dbg("transfer_buffer_length:%d", urb->transfer_buffer_length);
-	dbg("actual_length         :%d", urb->actual_length);
-	dbg("setup_packet          :%p", urb->setup_packet);
-	dbg("start_frame           :%d", urb->start_frame);
-	dbg("number_of_packets     :%d", urb->number_of_packets);
-	dbg("interval              :%d", urb->interval);
-	dbg("error_count           :%d", urb->error_count);
-	dbg("context               :%p", urb->context);
-	dbg("complete              :%p", urb->complete);
-}
-#endif
-/*-------------------------------------------------------------------*/
-static int dabusb_cancel_queue (pdabusb_t s, struct list_head *q)
-{
-	unsigned long flags;
-	pbuff_t b;
-
-	dbg("dabusb_cancel_queue");
-
-	spin_lock_irqsave (&s->lock, flags);
-
-	list_for_each_entry(b, q, buff_list) {
-#ifdef DEBUG
-		dump_urb(b->purb);
-#endif
-		usb_unlink_urb (b->purb);
-	}
-	spin_unlock_irqrestore (&s->lock, flags);
-	return 0;
-}
-/*-------------------------------------------------------------------*/
-static int dabusb_free_queue (struct list_head *q)
-{
-	struct list_head *tmp;
-	struct list_head *p;
-	pbuff_t b;
-
-	dbg("dabusb_free_queue");
-	for (p = q->next; p != q;) {
-		b = list_entry (p, buff_t, buff_list);
-
-#ifdef DEBUG
-		dump_urb(b->purb);
-#endif
-		kfree(b->purb->transfer_buffer);
-		usb_free_urb(b->purb);
-		tmp = p->next;
-		list_del (p);
-		kfree (b);
-		p = tmp;
-	}
-
-	return 0;
-}
-/*-------------------------------------------------------------------*/
-static int dabusb_free_buffers (pdabusb_t s)
-{
-	unsigned long flags;
-	dbg("dabusb_free_buffers");
-
-	spin_lock_irqsave(&s->lock, flags);
-
-	dabusb_free_queue (&s->free_buff_list);
-	dabusb_free_queue (&s->rec_buff_list);
-
-	spin_unlock_irqrestore(&s->lock, flags);
-
-	s->got_mem = 0;
-	return 0;
-}
-/*-------------------------------------------------------------------*/
-static void dabusb_iso_complete (struct urb *purb)
-{
-	pbuff_t b = purb->context;
-	pdabusb_t s = b->s;
-	int i;
-	int len;
-	int dst = 0;
-	void *buf = purb->transfer_buffer;
-
-	dbg("dabusb_iso_complete");
-
-	// process if URB was not killed
-	if (purb->status != -ENOENT) {
-		unsigned int pipe = usb_rcvisocpipe (purb->dev, _DABUSB_ISOPIPE);
-		int pipesize = usb_maxpacket (purb->dev, pipe, usb_pipeout (pipe));
-		for (i = 0; i < purb->number_of_packets; i++)
-			if (!purb->iso_frame_desc[i].status) {
-				len = purb->iso_frame_desc[i].actual_length;
-				if (len <= pipesize) {
-					memcpy (buf + dst, buf + purb->iso_frame_desc[i].offset, len);
-					dst += len;
-				}
-				else
-					dev_err(&purb->dev->dev,
-						"dabusb_iso_complete: invalid len %d\n", len);
-			}
-			else
-				dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status);
-		if (dst != purb->actual_length)
-			dev_err(&purb->dev->dev,
-				"dst!=purb->actual_length:%d!=%d\n",
-					dst, purb->actual_length);
-	}
-
-	if (atomic_dec_and_test (&s->pending_io) && !s->remove_pending && s->state != _stopped) {
-		s->overruns++;
-		dev_err(&purb->dev->dev, "overrun (%d)\n", s->overruns);
-	}
-	wake_up (&s->wait);
-}
-/*-------------------------------------------------------------------*/
-static int dabusb_alloc_buffers (pdabusb_t s)
-{
-	int transfer_len = 0;
-	pbuff_t b;
-	unsigned int pipe = usb_rcvisocpipe (s->usbdev, _DABUSB_ISOPIPE);
-	int pipesize = usb_maxpacket (s->usbdev, pipe, usb_pipeout (pipe));
-	int packets = _ISOPIPESIZE / pipesize;
-	int transfer_buffer_length = packets * pipesize;
-	int i;
-
-	dbg("dabusb_alloc_buffers pipesize:%d packets:%d transfer_buffer_len:%d",
-		 pipesize, packets, transfer_buffer_length);
-
-	while (transfer_len < (s->total_buffer_size << 10)) {
-		b = kzalloc(sizeof (buff_t), GFP_KERNEL);
-		if (!b) {
-			dev_err(&s->usbdev->dev,
-				"kzalloc(sizeof(buff_t))==NULL\n");
-			goto err;
-		}
-		b->s = s;
-		b->purb = usb_alloc_urb(packets, GFP_KERNEL);
-		if (!b->purb) {
-			dev_err(&s->usbdev->dev, "usb_alloc_urb == NULL\n");
-			kfree (b);
-			goto err;
-		}
-
-		b->purb->transfer_buffer = kmalloc (transfer_buffer_length, GFP_KERNEL);
-		if (!b->purb->transfer_buffer) {
-			kfree (b->purb);
-			kfree (b);
-			dev_err(&s->usbdev->dev,
-				"kmalloc(%d)==NULL\n", transfer_buffer_length);
-			goto err;
-		}
-
-		b->purb->transfer_buffer_length = transfer_buffer_length;
-		b->purb->number_of_packets = packets;
-		b->purb->complete = dabusb_iso_complete;
-		b->purb->context = b;
-		b->purb->dev = s->usbdev;
-		b->purb->pipe = pipe;
-		b->purb->transfer_flags = URB_ISO_ASAP;
-
-		for (i = 0; i < packets; i++) {
-			b->purb->iso_frame_desc[i].offset = i * pipesize;
-			b->purb->iso_frame_desc[i].length = pipesize;
-		}
-
-		transfer_len += transfer_buffer_length;
-		list_add_tail (&b->buff_list, &s->free_buff_list);
-	}
-	s->got_mem = transfer_len;
-
-	return 0;
-
-	err:
-	dabusb_free_buffers (s);
-	return -ENOMEM;
-}
-/*-------------------------------------------------------------------*/
-static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb)
-{
-	int ret;
-	unsigned int pipe;
-	int actual_length;
-
-	dbg("dabusb_bulk");
-
-	if (!pb->pipe)
-		pipe = usb_rcvbulkpipe (s->usbdev, 2);
-	else
-		pipe = usb_sndbulkpipe (s->usbdev, 2);
-
-	ret=usb_bulk_msg(s->usbdev, pipe, pb->data, pb->size, &actual_length, 100);
-	if(ret<0) {
-		dev_err(&s->usbdev->dev,
-			"usb_bulk_msg failed(%d)\n", ret);
-
-		if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
-			dev_err(&s->usbdev->dev, "set_interface failed\n");
-			return -EINVAL;
-		}
-
-	}
-
-	if( ret == -EPIPE ) {
-		dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n");
-		if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
-			dev_err(&s->usbdev->dev, "request failed\n");
-	}
-
-	pb->size = actual_length;
-	return ret;
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_writemem (pdabusb_t s, int pos, const unsigned char *data,
-			    int len)
-{
-	int ret;
-	unsigned char *transfer_buffer =  kmalloc (len, GFP_KERNEL);
-
-	if (!transfer_buffer) {
-		dev_err(&s->usbdev->dev,
-			"dabusb_writemem: kmalloc(%d) failed.\n", len);
-		return -ENOMEM;
-	}
-
-	memcpy (transfer_buffer, data, len);
-
-	ret=usb_control_msg(s->usbdev, usb_sndctrlpipe( s->usbdev, 0 ), 0xa0, 0x40, pos, 0, transfer_buffer, len, 300);
-
-	kfree (transfer_buffer);
-	return ret;
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_8051_reset (pdabusb_t s, unsigned char reset_bit)
-{
-	dbg("dabusb_8051_reset: %d",reset_bit);
-	return dabusb_writemem (s, CPUCS_REG, &reset_bit, 1);
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_loadmem (pdabusb_t s, const char *fname)
-{
-	int ret;
-	const struct ihex_binrec *rec;
-	const struct firmware *uninitialized_var(fw);
-
-	dbg("Enter dabusb_loadmem (internal)");
-
-	ret = request_ihex_firmware(&fw, "dabusb/firmware.fw", &s->usbdev->dev);
-	if (ret) {
-		dev_err(&s->usbdev->dev,
-			"Failed to load \"dabusb/firmware.fw\": %d\n", ret);
-		goto out;
-	}
-	ret = dabusb_8051_reset (s, 1);
-
-	for (rec = (const struct ihex_binrec *)fw->data; rec;
-	     rec = ihex_next_binrec(rec)) {
-		dbg("dabusb_writemem: %04X %p %d)", be32_to_cpu(rec->addr),
-		    rec->data, be16_to_cpu(rec->len));
-
-		ret = dabusb_writemem(s, be32_to_cpu(rec->addr), rec->data,
-				       be16_to_cpu(rec->len));
-		if (ret < 0) {
-			dev_err(&s->usbdev->dev,
-				"dabusb_writemem failed (%d %04X %p %d)\n",
-				ret, be32_to_cpu(rec->addr),
-				rec->data, be16_to_cpu(rec->len));
-			break;
-		}
-	}
-	ret = dabusb_8051_reset (s, 0);
-	release_firmware(fw);
- out:
-	dbg("dabusb_loadmem: exit");
-
-	return ret;
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_fpga_clear (pdabusb_t s, pbulk_transfer_t b)
-{
-	b->size = 4;
-	b->data[0] = 0x2a;
-	b->data[1] = 0;
-	b->data[2] = 0;
-	b->data[3] = 0;
-
-	dbg("dabusb_fpga_clear");
-
-	return dabusb_bulk (s, b);
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_fpga_init (pdabusb_t s, pbulk_transfer_t b)
-{
-	b->size = 4;
-	b->data[0] = 0x2c;
-	b->data[1] = 0;
-	b->data[2] = 0;
-	b->data[3] = 0;
-
-	dbg("dabusb_fpga_init");
-
-	return dabusb_bulk (s, b);
-}
-/* --------------------------------------------------------------------- */
-static int dabusb_fpga_download (pdabusb_t s, const char *fname)
-{
-	pbulk_transfer_t b = kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL);
-	const struct firmware *fw;
-	unsigned int blen, n;
-	int ret;
-
-	dbg("Enter dabusb_fpga_download (internal)");
-
-	if (!b) {
-		dev_err(&s->usbdev->dev,
-			"kmalloc(sizeof(bulk_transfer_t))==NULL\n");
-		return -ENOMEM;
-	}
-
-	ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
-	if (ret) {
-		dev_err(&s->usbdev->dev,
-			"Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
-		kfree(b);
-		return ret;
-	}
-
-	b->pipe = 1;
-	ret = dabusb_fpga_clear (s, b);
-	mdelay (10);
-	blen = fw->data[73] + (fw->data[72] << 8);
-
-	dbg("Bitstream len: %i", blen);
-
-	b->data[0] = 0x2b;
-	b->data[1] = 0;
-	b->data[2] = 0;
-	b->data[3] = 60;
-
-	for (n = 0; n <= blen + 60; n += 60) {
-		// some cclks for startup
-		b->size = 64;
-		memcpy (b->data + 4, fw->data + 74 + n, 60);
-		ret = dabusb_bulk (s, b);
-		if (ret < 0) {
-			dev_err(&s->usbdev->dev, "dabusb_bulk failed.\n");
-			break;
-		}
-		mdelay (1);
-	}
-
-	ret = dabusb_fpga_init (s, b);
-	kfree (b);
-	release_firmware(fw);
-
-	dbg("exit dabusb_fpga_download");
-
-	return ret;
-}
-
-static int dabusb_stop (pdabusb_t s)
-{
-	dbg("dabusb_stop");
-
-	s->state = _stopped;
-	dabusb_cancel_queue (s, &s->rec_buff_list);
-
-	dbg("pending_io: %d", s->pending_io.counter);
-
-	s->pending_io.counter = 0;
-	return 0;
-}
-
-static int dabusb_startrek (pdabusb_t s)
-{
-	if (!s->got_mem && s->state != _started) {
-
-		dbg("dabusb_startrek");
-
-		if (dabusb_alloc_buffers (s) < 0)
-			return -ENOMEM;
-		dabusb_stop (s);
-		s->state = _started;
-		s->readptr = 0;
-	}
-
-	if (!list_empty (&s->free_buff_list)) {
-		pbuff_t end;
-		int ret;
-
-	while (!dabusb_add_buf_tail (s, &s->rec_buff_list, &s->free_buff_list)) {
-
-			dbg("submitting: end:%p s->rec_buff_list:%p", s->rec_buff_list.prev, &s->rec_buff_list);
-
-			end = list_entry (s->rec_buff_list.prev, buff_t, buff_list);
-
-			ret = usb_submit_urb (end->purb, GFP_KERNEL);
-			if (ret) {
-				dev_err(&s->usbdev->dev,
-					"usb_submit_urb returned:%d\n", ret);
-				if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list))
-					dev_err(&s->usbdev->dev,
-						"startrek: dabusb_add_buf_tail failed\n");
-				break;
-			}
-			else
-				atomic_inc (&s->pending_io);
-		}
-		dbg("pending_io: %d",s->pending_io.counter);
-	}
-
-	return 0;
-}
-
-static ssize_t dabusb_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-	pdabusb_t s = (pdabusb_t) file->private_data;
-	unsigned long flags;
-	unsigned ret = 0;
-	int rem;
-	int cnt;
-	pbuff_t b;
-	struct urb *purb = NULL;
-
-	dbg("dabusb_read");
-
-	if (*ppos)
-		return -ESPIPE;
-
-	if (s->remove_pending)
-		return -EIO;
-
-
-	if (!s->usbdev)
-		return -EIO;
-
-	while (count > 0) {
-		dabusb_startrek (s);
-
-		spin_lock_irqsave (&s->lock, flags);
-
-		if (list_empty (&s->rec_buff_list)) {
-
-			spin_unlock_irqrestore(&s->lock, flags);
-
-			dev_err(&s->usbdev->dev,
-				"error: rec_buf_list is empty\n");
-			goto err;
-		}
-
-		b = list_entry (s->rec_buff_list.next, buff_t, buff_list);
-		purb = b->purb;
-
-		spin_unlock_irqrestore(&s->lock, flags);
-
-		if (purb->status == -EINPROGRESS) {
-			if (file->f_flags & O_NONBLOCK)		// return nonblocking
-			 {
-				if (!ret)
-					ret = -EAGAIN;
-				goto err;
-			}
-
-			interruptible_sleep_on (&s->wait);
-
-			if (signal_pending (current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto err;
-			}
-
-			spin_lock_irqsave (&s->lock, flags);
-
-			if (list_empty (&s->rec_buff_list)) {
-				spin_unlock_irqrestore(&s->lock, flags);
-				dev_err(&s->usbdev->dev,
-					"error: still no buffer available.\n");
-				goto err;
-			}
-			spin_unlock_irqrestore(&s->lock, flags);
-			s->readptr = 0;
-		}
-		if (s->remove_pending) {
-			ret = -EIO;
-			goto err;
-		}
-
-		rem = purb->actual_length - s->readptr;		// set remaining bytes to copy
-
-		if (count >= rem)
-			cnt = rem;
-		else
-			cnt = count;
-
-		dbg("copy_to_user:%p %p %d",buf, purb->transfer_buffer + s->readptr, cnt);
-
-		if (copy_to_user (buf, purb->transfer_buffer + s->readptr, cnt)) {
-			dev_err(&s->usbdev->dev, "read: copy_to_user failed\n");
-			if (!ret)
-				ret = -EFAULT;
-			goto err;
-		}
-
-		s->readptr += cnt;
-		count -= cnt;
-		buf += cnt;
-		ret += cnt;
-
-		if (s->readptr == purb->actual_length) {
-			// finished, take next buffer
-			if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list))
-				dev_err(&s->usbdev->dev,
-					"read: dabusb_add_buf_tail failed\n");
-			s->readptr = 0;
-		}
-	}
-      err:			//mutex_unlock(&s->mutex);
-	return ret;
-}
-
-static int dabusb_open (struct inode *inode, struct file *file)
-{
-	int devnum = iminor(inode);
-	pdabusb_t s;
-	int r;
-
-	if (devnum < DABUSB_MINOR || devnum >= (DABUSB_MINOR + NRDABUSB))
-		return -EIO;
-
-	s = &dabusb[devnum - DABUSB_MINOR];
-
-	dbg("dabusb_open");
-	mutex_lock(&s->mutex);
-
-	while (!s->usbdev || s->opened) {
-		mutex_unlock(&s->mutex);
-
-		if (file->f_flags & O_NONBLOCK)
-			return -EBUSY;
-		msleep_interruptible(500);
-
-		if (signal_pending (current))
-			return -EAGAIN;
-		mutex_lock(&s->mutex);
-	}
-	if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
-		mutex_unlock(&s->mutex);
-		dev_err(&s->usbdev->dev, "set_interface failed\n");
-		return -EINVAL;
-	}
-	s->opened = 1;
-	mutex_unlock(&s->mutex);
-
-	file->f_pos = 0;
-	file->private_data = s;
-
-	r = nonseekable_open(inode, file);
-	return r;
-}
-
-static int dabusb_release (struct inode *inode, struct file *file)
-{
-	pdabusb_t s = (pdabusb_t) file->private_data;
-
-	dbg("dabusb_release");
-
-	mutex_lock(&s->mutex);
-	dabusb_stop (s);
-	dabusb_free_buffers (s);
-	mutex_unlock(&s->mutex);
-
-	if (!s->remove_pending) {
-		if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0)
-			dev_err(&s->usbdev->dev, "set_interface failed\n");
-	}
-	else
-		wake_up (&s->remove_ok);
-
-	s->opened = 0;
-	return 0;
-}
-
-static long dabusb_ioctl (struct file *file, unsigned int cmd, unsigned long arg)
-{
-	pdabusb_t s = (pdabusb_t) file->private_data;
-	pbulk_transfer_t pbulk;
-	int ret = 0;
-	int version = DABUSB_VERSION;
-
-	dbg("dabusb_ioctl");
-
-	if (s->remove_pending)
-		return -EIO;
-
-	mutex_lock(&s->mutex);
-
-	if (!s->usbdev) {
-		mutex_unlock(&s->mutex);
-		return -EIO;
-	}
-
-	switch (cmd) {
-
-	case IOCTL_DAB_BULK:
-		pbulk = memdup_user((void __user *)arg,
-				    sizeof(bulk_transfer_t));
-
-		if (IS_ERR(pbulk)) {
-			ret = PTR_ERR(pbulk);
-			break;
-		}
-
-		ret=dabusb_bulk (s, pbulk);
-		if(ret==0)
-			if (copy_to_user((void __user *)arg, pbulk,
-					 sizeof(bulk_transfer_t)))
-				ret = -EFAULT;
-		kfree (pbulk);
-		break;
-
-	case IOCTL_DAB_OVERRUNS:
-		ret = put_user (s->overruns, (unsigned int __user *) arg);
-		break;
-
-	case IOCTL_DAB_VERSION:
-		ret = put_user (version, (unsigned int __user *) arg);
-		break;
-
-	default:
-		ret = -ENOIOCTLCMD;
-		break;
-	}
-	mutex_unlock(&s->mutex);
-	return ret;
-}
-
-static const struct file_operations dabusb_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		dabusb_read,
-	.unlocked_ioctl =	dabusb_ioctl,
-	.open =		dabusb_open,
-	.release =	dabusb_release,
-};
-
-static char *dabusb_devnode(struct device *dev, mode_t *mode)
-{
-	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
-}
-
-static struct usb_class_driver dabusb_class = {
-	.name =		"dabusb%d",
-	.devnode =	dabusb_devnode,
-	.fops =		&dabusb_fops,
-	.minor_base =	DABUSB_MINOR,
-};
-
-
-/* --------------------------------------------------------------------- */
-static int dabusb_probe (struct usb_interface *intf,
-			 const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	int retval;
-	pdabusb_t s;
-
-	dbg("dabusb: probe: vendor id 0x%x, device id 0x%x ifnum:%d",
-	    le16_to_cpu(usbdev->descriptor.idVendor),
-	    le16_to_cpu(usbdev->descriptor.idProduct),
-	    intf->altsetting->desc.bInterfaceNumber);
-
-	/* We don't handle multiple configurations */
-	if (usbdev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	if (intf->altsetting->desc.bInterfaceNumber != _DABUSB_IF &&
-	    le16_to_cpu(usbdev->descriptor.idProduct) == 0x9999)
-		return -ENODEV;
-
-
-
-	s = &dabusb[intf->minor];
-
-	mutex_lock(&s->mutex);
-	s->remove_pending = 0;
-	s->usbdev = usbdev;
-	s->devnum = intf->minor;
-
-	if (usb_reset_configuration (usbdev) < 0) {
-		dev_err(&intf->dev, "reset_configuration failed\n");
-		goto reject;
-	}
-	if (le16_to_cpu(usbdev->descriptor.idProduct) == 0x2131) {
-		dabusb_loadmem (s, NULL);
-		goto reject;
-	}
-	else {
-		dabusb_fpga_download (s, NULL);
-
-		if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) {
-			dev_err(&intf->dev, "set_interface failed\n");
-			goto reject;
-		}
-	}
-	dbg("bound to interface: %d", intf->altsetting->desc.bInterfaceNumber);
-	usb_set_intfdata (intf, s);
-	mutex_unlock(&s->mutex);
-
-	retval = usb_register_dev(intf, &dabusb_class);
-	if (retval) {
-		usb_set_intfdata (intf, NULL);
-		return -ENOMEM;
-	}
-
-	return 0;
-
-      reject:
-	mutex_unlock(&s->mutex);
-	s->usbdev = NULL;
-	return -ENODEV;
-}
-
-static void dabusb_disconnect (struct usb_interface *intf)
-{
-	wait_queue_t __wait;
-	pdabusb_t s = usb_get_intfdata (intf);
-
-	dbg("dabusb_disconnect");
-
-	init_waitqueue_entry(&__wait, current);
-
-	usb_set_intfdata (intf, NULL);
-	if (s) {
-		usb_deregister_dev (intf, &dabusb_class);
-		s->remove_pending = 1;
-		wake_up (&s->wait);
-		add_wait_queue(&s->remove_ok, &__wait);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		if (s->state == _started)
-			schedule();
-		current->state = TASK_RUNNING;
-		remove_wait_queue(&s->remove_ok, &__wait);
-
-		s->usbdev = NULL;
-		s->overruns = 0;
-	}
-}
-
-static struct usb_device_id dabusb_ids [] = {
-	// { USB_DEVICE(0x0547, 0x2131) },	/* An2131 chip, no boot ROM */
-	{ USB_DEVICE(0x0547, 0x9999) },
-	{ }						/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, dabusb_ids);
-
-static struct usb_driver dabusb_driver = {
-	.name =		"dabusb",
-	.probe =	dabusb_probe,
-	.disconnect =	dabusb_disconnect,
-	.id_table =	dabusb_ids,
-};
-
-/* --------------------------------------------------------------------- */
-
-static int __init dabusb_init (void)
-{
-	int retval;
-	unsigned u;
-
-	/* initialize struct */
-	for (u = 0; u < NRDABUSB; u++) {
-		pdabusb_t s = &dabusb[u];
-		memset (s, 0, sizeof (dabusb_t));
-		mutex_init (&s->mutex);
-		s->usbdev = NULL;
-		s->total_buffer_size = buffers;
-		init_waitqueue_head (&s->wait);
-		init_waitqueue_head (&s->remove_ok);
-		spin_lock_init (&s->lock);
-		INIT_LIST_HEAD (&s->free_buff_list);
-		INIT_LIST_HEAD (&s->rec_buff_list);
-	}
-
-	/* register misc device */
-	retval = usb_register(&dabusb_driver);
-	if (retval)
-		goto out;
-
-	dbg("dabusb_init: driver registered");
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-out:
-	return retval;
-}
-
-static void __exit dabusb_cleanup (void)
-{
-	dbg("dabusb_cleanup");
-
-	usb_deregister (&dabusb_driver);
-}
-
-/* --------------------------------------------------------------------- */
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("dabusb/firmware.fw");
-MODULE_FIRMWARE("dabusb/bitstream.bin");
-
-module_param(buffers, int, 0);
-MODULE_PARM_DESC (buffers, "Number of buffers (default=256)");
-
-module_init (dabusb_init);
-module_exit (dabusb_cleanup);
-
-/* --------------------------------------------------------------------- */
diff --git a/drivers/media/video/dabusb.h b/drivers/media/video/dabusb.h
deleted file mode 100644
index 00eb34c863eb..000000000000
--- a/drivers/media/video/dabusb.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#define _BULK_DATA_LEN 64
-typedef struct
-{
-	unsigned char data[_BULK_DATA_LEN];
-	unsigned int size;
-	unsigned int pipe;
-}bulk_transfer_t,*pbulk_transfer_t;
-
-#define DABUSB_MINOR 240		/* some unassigned USB minor */
-#define DABUSB_VERSION 0x1000
-#define IOCTL_DAB_BULK              _IOWR('d', 0x30, bulk_transfer_t)
-#define IOCTL_DAB_OVERRUNS	    _IOR('d',  0x15, int)
-#define IOCTL_DAB_VERSION           _IOR('d', 0x3f, int)
-
-#ifdef __KERNEL__
-
-typedef enum { _stopped=0, _started } driver_state_t;
-
-typedef struct
-{
-	struct mutex mutex;
-	struct usb_device *usbdev;
-	wait_queue_head_t wait;
-	wait_queue_head_t remove_ok;
-	spinlock_t lock;
-	atomic_t pending_io;
-	driver_state_t state;
-	int remove_pending;
-	int got_mem;
-	int total_buffer_size;
-	unsigned int overruns;
-	int readptr;
-	int opened;
-	int devnum;
-	struct list_head free_buff_list;
-	struct list_head rec_buff_list;
-} dabusb_t,*pdabusb_t;
-
-typedef struct
-{
-	pdabusb_t s;
-	struct urb *purb;
-	struct list_head buff_list;
-} buff_t,*pbuff_t;
-
-typedef struct
-{
-	wait_queue_head_t wait;
-} bulk_completion_context_t, *pbulk_completion_context_t;
-
-
-#define _DABUSB_IF 2
-#define _DABUSB_ISOPIPE 0x09
-#define _ISOPIPESIZE	16384
-
-#define _BULK_DATA_LEN 64
-// Vendor specific request code for Anchor Upload/Download
-// This one is implemented in the core
-#define ANCHOR_LOAD_INTERNAL  0xA0
-
-// EZ-USB Control and Status Register.  Bit 0 controls 8051 reset
-#define CPUCS_REG    0x7F92
-#define _TOTAL_BUFFERS 384
-
-#define MAX_INTEL_HEX_RECORD_LENGTH 16
-
-#ifndef _BYTE_DEFINED
-#define _BYTE_DEFINED
-typedef unsigned char BYTE;
-#endif // !_BYTE_DEFINED
-
-#ifndef _WORD_DEFINED
-#define _WORD_DEFINED
-typedef unsigned short WORD;
-#endif // !_WORD_DEFINED
-
-typedef struct _INTEL_HEX_RECORD
-{
-   BYTE  Length;
-   WORD  Address;
-   BYTE  Type;
-   BYTE  Data[MAX_INTEL_HEX_RECORD_LENGTH];
-} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
-
-#endif
-- 
cgit v1.2.3


From 730726a6f90740a5954ca2fb1c74fad6f44a2c42 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Mon, 27 Dec 2010 15:41:58 -0300
Subject: [media] DVB: Set scanmask for Budget/SAA7146 cards

These devices do not return the full command+address, so set
scanmask accordingly.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ttpci/budget-ci.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 8ae67c1751a9..b82756db5bd1 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -184,6 +184,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	dev->input_phys = budget_ci->ir.phys;
 	dev->input_id.bustype = BUS_PCI;
 	dev->input_id.version = 1;
+	dev->scanmask = 0xff;
 	if (saa->pci->subsystem_vendor) {
 		dev->input_id.vendor = saa->pci->subsystem_vendor;
 		dev->input_id.product = saa->pci->subsystem_device;
-- 
cgit v1.2.3


From db9285f79b12286a3b525b41ab275796679c1dfa Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Mon, 27 Dec 2010 15:45:19 -0300
Subject: [media] MEDIA: RC: Provide full scancodes for TT-1500 remote control

Add 0x15 prefix to scancodes for TT-1500 remote control.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/rc-tt-1500.c | 78 +++++++++++++++++------------------
 1 file changed, 39 insertions(+), 39 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
index bb194879a794..295f3738e301 100644
--- a/drivers/media/rc/keymaps/rc-tt-1500.c
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -15,45 +15,45 @@
 /* for the Technotrend 1500 bundled remotes (grey and black): */
 
 static struct rc_map_table tt_1500[] = {
-	{ 0x01, KEY_POWER },
-	{ 0x02, KEY_SHUFFLE },		/* ? double-arrow key */
-	{ 0x03, KEY_1 },
-	{ 0x04, KEY_2 },
-	{ 0x05, KEY_3 },
-	{ 0x06, KEY_4 },
-	{ 0x07, KEY_5 },
-	{ 0x08, KEY_6 },
-	{ 0x09, KEY_7 },
-	{ 0x0a, KEY_8 },
-	{ 0x0b, KEY_9 },
-	{ 0x0c, KEY_0 },
-	{ 0x0d, KEY_UP },
-	{ 0x0e, KEY_LEFT },
-	{ 0x0f, KEY_OK },
-	{ 0x10, KEY_RIGHT },
-	{ 0x11, KEY_DOWN },
-	{ 0x12, KEY_INFO },
-	{ 0x13, KEY_EXIT },
-	{ 0x14, KEY_RED },
-	{ 0x15, KEY_GREEN },
-	{ 0x16, KEY_YELLOW },
-	{ 0x17, KEY_BLUE },
-	{ 0x18, KEY_MUTE },
-	{ 0x19, KEY_TEXT },
-	{ 0x1a, KEY_MODE },		/* ? TV/Radio */
-	{ 0x21, KEY_OPTION },
-	{ 0x22, KEY_EPG },
-	{ 0x23, KEY_CHANNELUP },
-	{ 0x24, KEY_CHANNELDOWN },
-	{ 0x25, KEY_VOLUMEUP },
-	{ 0x26, KEY_VOLUMEDOWN },
-	{ 0x27, KEY_SETUP },
-	{ 0x3a, KEY_RECORD },		/* these keys are only in the black remote */
-	{ 0x3b, KEY_PLAY },
-	{ 0x3c, KEY_STOP },
-	{ 0x3d, KEY_REWIND },
-	{ 0x3e, KEY_PAUSE },
-	{ 0x3f, KEY_FORWARD },
+	{ 0x1501, KEY_POWER },
+	{ 0x1502, KEY_SHUFFLE },		/* ? double-arrow key */
+	{ 0x1503, KEY_1 },
+	{ 0x1504, KEY_2 },
+	{ 0x1505, KEY_3 },
+	{ 0x1506, KEY_4 },
+	{ 0x1507, KEY_5 },
+	{ 0x1508, KEY_6 },
+	{ 0x1509, KEY_7 },
+	{ 0x150a, KEY_8 },
+	{ 0x150b, KEY_9 },
+	{ 0x150c, KEY_0 },
+	{ 0x150d, KEY_UP },
+	{ 0x150e, KEY_LEFT },
+	{ 0x150f, KEY_OK },
+	{ 0x1510, KEY_RIGHT },
+	{ 0x1511, KEY_DOWN },
+	{ 0x1512, KEY_INFO },
+	{ 0x1513, KEY_EXIT },
+	{ 0x1514, KEY_RED },
+	{ 0x1515, KEY_GREEN },
+	{ 0x1516, KEY_YELLOW },
+	{ 0x1517, KEY_BLUE },
+	{ 0x1518, KEY_MUTE },
+	{ 0x1519, KEY_TEXT },
+	{ 0x151a, KEY_MODE },		/* ? TV/Radio */
+	{ 0x1521, KEY_OPTION },
+	{ 0x1522, KEY_EPG },
+	{ 0x1523, KEY_CHANNELUP },
+	{ 0x1524, KEY_CHANNELDOWN },
+	{ 0x1525, KEY_VOLUMEUP },
+	{ 0x1526, KEY_VOLUMEDOWN },
+	{ 0x1527, KEY_SETUP },
+	{ 0x153a, KEY_RECORD },		/* these keys are only in the black remote */
+	{ 0x153b, KEY_PLAY },
+	{ 0x153c, KEY_STOP },
+	{ 0x153d, KEY_REWIND },
+	{ 0x153e, KEY_PAUSE },
+	{ 0x153f, KEY_FORWARD },
 };
 
 static struct rc_map_list tt_1500_map = {
-- 
cgit v1.2.3


From f9d7d787842e92bc768d282f37fc3056c5441ddb Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Wed, 22 Dec 2010 17:31:58 -0300
Subject: [media] saa7115: allow input standard autodetection for more chips

Autodetect input's standard using field frequency detection
feature (FIDT in status byte at 0x1F) of the chips saa7111/
saa7111a/saa7113/saa7114/saa7118.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7115.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 301c62b88cad..f35459d1f42f 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1348,8 +1348,17 @@ static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 	int reg1e;
 
 	*std = V4L2_STD_ALL;
-	if (state->ident != V4L2_IDENT_SAA7115)
+	if (state->ident != V4L2_IDENT_SAA7115) {
+		int reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+
+		if (reg1f & 0x20)
+			*std = V4L2_STD_525_60;
+		else
+			*std = V4L2_STD_625_50;
+
 		return 0;
+	}
+
 	reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
 
 	switch (reg1e & 0x03) {
-- 
cgit v1.2.3


From 50155c25bf346b65fec8e215131df397b0a5ee6e Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Wed, 22 Dec 2010 17:31:59 -0300
Subject: [media] fsl_viu: add VIDIOC_QUERYSTD and VIDIOC_G_STD support

VIDIOC_QUERYSTD and VIDIOC_G_STD ioctls are currently not
supported in the FSL VIU driver. The decoder subdevice
driver saa7115 extended by previous patch supports QUERYSTD
for saa711x, so we add the appropriate ioctls to the VIU
driver to be able to determine the video input's standard.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/fsl-viu.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index 693e9c07e3f4..e4bba88254c7 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -194,6 +194,8 @@ struct viu_dev {
 
 	/* decoder */
 	struct v4l2_subdev	*decoder;
+
+	v4l2_std_id		std;
 };
 
 struct viu_fh {
@@ -937,14 +939,31 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 #define decoder_call(viu, o, f, args...) \
 	v4l2_subdev_call(viu->decoder, o, f, ##args)
 
+static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct viu_fh *fh = priv;
+
+	decoder_call(fh->dev, video, querystd, std_id);
+	return 0;
+}
+
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
 {
 	struct viu_fh *fh = priv;
 
+	fh->dev->std = *id;
 	decoder_call(fh->dev, core, s_std, *id);
 	return 0;
 }
 
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct viu_fh *fh = priv;
+
+	*std_id = fh->dev->std;
+	return 0;
+}
+
 /* only one input in this driver */
 static int vidioc_enum_input(struct file *file, void *priv,
 					struct v4l2_input *inp)
@@ -1402,7 +1421,9 @@ static const struct v4l2_ioctl_ops viu_ioctl_ops = {
 	.vidioc_querybuf      = vidioc_querybuf,
 	.vidioc_qbuf          = vidioc_qbuf,
 	.vidioc_dqbuf         = vidioc_dqbuf,
+	.vidioc_g_std         = vidioc_g_std,
 	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_querystd      = vidioc_querystd,
 	.vidioc_enum_input    = vidioc_enum_input,
 	.vidioc_g_input       = vidioc_g_input,
 	.vidioc_s_input       = vidioc_s_input,
-- 
cgit v1.2.3


From fe04164647588ec55937e6d696da1ebeca04d000 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 23 Dec 2010 16:38:53 -0300
Subject: [media] cx231xxx: fix typo in saddr_len check

The original code compared "saddr_len" with zero twice in a nonsensical
way.  I asked the list, and Andy Walls and Sri Deevi say that the second
check should be if "saddr_len == 1".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Srinivasa Deevi <Srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index 44d124c2fc35..7d62d58617f5 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -1515,7 +1515,7 @@ int cx231xx_read_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1566,7 +1566,7 @@ int cx231xx_write_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1600,7 +1600,7 @@ int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1641,7 +1641,7 @@ int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
-- 
cgit v1.2.3


From 44c6e2a7c2ec76dd495a0f330f9beac572a2fdd7 Mon Sep 17 00:00:00 2001
From: Ang Way Chuang <wcang@sfc.wide.ad.jp>
Date: Fri, 24 Dec 2010 02:40:46 -0300
Subject: [media] cx88-dvb.c: DVB net latency using Hauppauge HVR4000

A Hauppauge HVR 4000 is used on a School On Internet Asia (SOI Asia)
project in order to carry IP traffic over ULE. However, there is an
issue with high latency jitter.

My boss, Husni, identified the problem and provided a patch for it.

The default buffer size of 32 TS frames on cx88 causes the high latency,
so our deployment changes that to 6 TS frames. This patch made the
buffer size tunable, while keeping the default buffer size of 32 TS
frames unchanged.

Signed-off-by: Achmad Husni Thamrin <husni@ai3.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-dvb.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 367a653f4c95..90717ee944ec 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -67,6 +67,10 @@ static unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug,"enable debug messages [dvb]");
 
+static unsigned int dvb_buf_tscnt = 32;
+module_param(dvb_buf_tscnt, int, 0644);
+MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]");
+
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define dprintk(level,fmt, arg...)	if (debug >= level) \
@@ -80,10 +84,10 @@ static int dvb_buf_setup(struct videobuf_queue *q,
 	struct cx8802_dev *dev = q->priv_data;
 
 	dev->ts_packet_size  = 188 * 4;
-	dev->ts_packet_count = 32;
+	dev->ts_packet_count = dvb_buf_tscnt;
 
 	*size  = dev->ts_packet_size * dev->ts_packet_count;
-	*count = 32;
+	*count = dvb_buf_tscnt;
 	return 0;
 }
 
-- 
cgit v1.2.3


From b7a0f2e793a52b306e682a0e2e9a0b6f0f0a730e Mon Sep 17 00:00:00 2001
From: Ramiro Morales <ramiro@rmorales.net>
Date: Sun, 26 Dec 2010 18:13:30 -0300
Subject: [media] saa7134: Add support for Compro VideoMate Vista M1F

Signed-off-by: Pavel Osnova <pvosnova@gmail.com>
Signed-off-by: Ramiro Morales <ramiro@rmorales.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/keymaps/Makefile           |  1 +
 drivers/media/rc/keymaps/rc-videomate-m1f.c | 92 +++++++++++++++++++++++++++++
 drivers/media/video/saa7134/saa7134-cards.c | 38 ++++++++++++
 drivers/media/video/saa7134/saa7134-input.c |  5 ++
 drivers/media/video/saa7134/saa7134.h       |  1 +
 5 files changed, 137 insertions(+)
 create mode 100644 drivers/media/rc/keymaps/rc-videomate-m1f.c

(limited to 'drivers/media')

diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index 148900f443d2..0659e9f50144 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-trekstor.o \
 			rc-tt-1500.o \
 			rc-twinhan1027.o \
+			rc-videomate-m1f.o \
 			rc-videomate-s350.o \
 			rc-videomate-tv-pvr.o \
 			rc-winfast.o \
diff --git a/drivers/media/rc/keymaps/rc-videomate-m1f.c b/drivers/media/rc/keymaps/rc-videomate-m1f.c
new file mode 100644
index 000000000000..4994d405c0a1
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-videomate-m1f.c
@@ -0,0 +1,92 @@
+/* videomate-m1f.h - Keytable for videomate_m1f Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Pavel Osnova <pvosnova@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table videomate_m1f[] = {
+	{ 0x01, KEY_POWER },
+	{ 0x31, KEY_TUNER },
+	{ 0x33, KEY_VIDEO },
+	{ 0x2f, KEY_RADIO },
+	{ 0x30, KEY_CAMERA },
+	{ 0x2d, KEY_NEW }, /* TV record button */
+	{ 0x17, KEY_CYCLEWINDOWS },
+	{ 0x2c, KEY_ANGLE },
+	{ 0x2b, KEY_LANGUAGE },
+	{ 0x32, KEY_SEARCH }, /* '...' button */
+	{ 0x11, KEY_UP },
+	{ 0x13, KEY_LEFT },
+	{ 0x15, KEY_OK },
+	{ 0x14, KEY_RIGHT },
+	{ 0x12, KEY_DOWN },
+	{ 0x16, KEY_BACKSPACE },
+	{ 0x02, KEY_ZOOM }, /* WIN key */
+	{ 0x04, KEY_INFO },
+	{ 0x05, KEY_VOLUMEUP },
+	{ 0x03, KEY_MUTE },
+	{ 0x07, KEY_CHANNELUP },
+	{ 0x06, KEY_VOLUMEDOWN },
+	{ 0x08, KEY_CHANNELDOWN },
+	{ 0x0c, KEY_RECORD },
+	{ 0x0e, KEY_STOP },
+	{ 0x0a, KEY_BACK },
+	{ 0x0b, KEY_PLAY },
+	{ 0x09, KEY_FORWARD },
+	{ 0x10, KEY_PREVIOUS },
+	{ 0x0d, KEY_PAUSE },
+	{ 0x0f, KEY_NEXT },
+	{ 0x1e, KEY_1 },
+	{ 0x1f, KEY_2 },
+	{ 0x20, KEY_3 },
+	{ 0x21, KEY_4 },
+	{ 0x22, KEY_5 },
+	{ 0x23, KEY_6 },
+	{ 0x24, KEY_7 },
+	{ 0x25, KEY_8 },
+	{ 0x26, KEY_9 },
+	{ 0x2a, KEY_NUMERIC_STAR }, /* * key */
+	{ 0x1d, KEY_0 },
+	{ 0x29, KEY_SUBTITLE }, /* # key */
+	{ 0x27, KEY_CLEAR },
+	{ 0x34, KEY_SCREEN },
+	{ 0x28, KEY_ENTER },
+	{ 0x19, KEY_RED },
+	{ 0x1a, KEY_GREEN },
+	{ 0x1b, KEY_YELLOW },
+	{ 0x1c, KEY_BLUE },
+	{ 0x18, KEY_TEXT },
+};
+
+static struct rc_map_list videomate_m1f_map = {
+	.map = {
+		.scan    = videomate_m1f,
+		.size    = ARRAY_SIZE(videomate_m1f),
+		.rc_type = RC_TYPE_UNKNOWN,     /* Legacy IR type */
+		.name    = RC_MAP_VIDEOMATE_M1F,
+	}
+};
+
+static int __init init_rc_map_videomate_m1f(void)
+{
+	return rc_map_register(&videomate_m1f_map);
+}
+
+static void __exit exit_rc_map_videomate_m1f(void)
+{
+	rc_map_unregister(&videomate_m1f_map);
+}
+
+module_init(init_rc_map_videomate_m1f)
+module_exit(exit_rc_map_videomate_m1f)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pavel Osnova <pvosnova@gmail.com>");
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index ff23e6ebdde4..e7aa588c6c5a 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5538,6 +5538,37 @@ struct saa7134_board saa7134_boards[] = {
 			.amux   = LINE2,
 		} },
 	},
+	[SAA7134_BOARD_VIDEOMATE_M1F] = {
+		/* Pavel Osnova <pvosnova@gmail.com> */
+		.name           = "Compro VideoMate Vista M1F",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = 0x60,
+		.inputs         = { {
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE2,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE2,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE1,
+		},
+		.mute = {
+			.name = name_mute,
+			.amux = TV,
+		},
+	},
 
 };
 
@@ -6730,6 +6761,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
 		.subdevice    = 0x7090,
 		.driver_data  = SAA7134_BOARD_BEHOLD_A7,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7135,
+		.subvendor    = 0x185b,
+		.subdevice    = 0xc900,
+		.driver_data  = SAA7134_BOARD_VIDEOMATE_M1F,
 	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -7046,6 +7083,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_VIDEOMATE_TV_PVR:
 	case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
 	case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
+	case SAA7134_BOARD_VIDEOMATE_M1F:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 98678d941847..dc646e65edb7 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -721,6 +721,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keyup   = 0x020000;
 		polling      = 50; /* ms */
 		break;
+	case SAA7134_BOARD_VIDEOMATE_M1F:
+		ir_codes     = RC_MAP_VIDEOMATE_M1F;
+		mask_keycode = 0x0ff00;
+		mask_keyup   = 0x040000;
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index babfbe7543eb..5b0a347b0b8f 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -326,6 +326,7 @@ struct saa7134_card_ir {
 #define SAA7134_BOARD_AVERMEDIA_M733A       180
 #define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181
 #define SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG 182
+#define SAA7134_BOARD_VIDEOMATE_M1F         183
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
-- 
cgit v1.2.3


From a3fa904ec79b94f0db7faed010ff94d42f7d1d47 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 25 Oct 2010 17:51:15 -0300
Subject: [media] em28xx: Fix audio input for Terratec Grabby

The audio input line was wrong. Fix it.

Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-cards.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 5d79d0eb64ab..8af302b425b3 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1660,11 +1660,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_TERRATEC_AV350] = {
-- 
cgit v1.2.3


From 5f63306d82131371f464c0e5b7ebe6a23a84c768 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 27 Dec 2010 21:04:58 -0300
Subject: [media] cx231xx: use bitwise negate instead of logical

Bitwise negate was intended here.  INPUT_SEL_MASK is 0x30.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx231xx/cx231xx-avcore.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index d52955c21007..c53e97295a0d 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -274,7 +274,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 
 	if (ch1_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH1, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch1_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH1, value);
@@ -282,7 +282,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 
 	if (ch2_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH2, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch2_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH2, value);
@@ -292,7 +292,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 	   7 less than the input number */
 	if (ch3_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH3, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch3_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH3, value);
-- 
cgit v1.2.3


From 9028f58f5d7e810a0e88b508ebe6a69daf7e3273 Mon Sep 17 00:00:00 2001
From: Alexey Chernov <4ernov@gmail.com>
Date: Mon, 6 Dec 2010 17:09:53 -0300
Subject: [media] support of GoTView PCI-E X5 3D Hybrid in cx23885

Some comments:
1. Everything initialize properly except radio.
2. All analog inputs (TV, composite, S-Video) are tested by myself in several
TV norms (SECAM-D, PAL, NTSC), everything work fine.

So the patch adds general support/detection of the card with working analog
part, DVB part is not supported for now.

Signed-off-by: Alexey Chernov <4ernov@gmail.com>
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-cards.c | 33 +++++++++++++++++++++++++++++
 drivers/media/video/cx23885/cx23885.h       |  1 +
 2 files changed, 34 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 8861309268b1..b298b730943c 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -309,6 +309,26 @@ struct cx23885_board cx23885_boards[] = {
 				  CX25840_COMPONENT_ON,
 		} },
 	},
+	[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
+		.name		= "GoTView X5 3D Hybrid",
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2,
+			.gpio0	= 0x02,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX23885_VMUX_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		} },
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -496,6 +516,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x107d,
 		.subdevice = 0x6f22,
 		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
+	}, {
+		.subvendor = 0x5654,
+		.subdevice = 0x2390,
+		.card      = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -712,6 +736,10 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 		else if (port->nr == 2)
 			bitmask = 0x04;
 		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		/* Tuner Reset Command */
+		bitmask = 0x02;
+		break;
 	}
 
 	if (bitmask) {
@@ -967,6 +995,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* CX24228 GPIO */
 		/* Connected to IF / Mux */
 		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
 	}
 }
 
@@ -1218,6 +1249,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -1245,6 +1277,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index fd387229daff..62e41ab65810 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -84,6 +84,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1290        26
 #define CX23885_BOARD_MYGICA_X8558PRO          27
 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
+#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
-- 
cgit v1.2.3


From a519d70e0cf346e946202ffcbeaf57a1748d0c03 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segoon@openwall.com>
Date: Fri, 19 Nov 2010 15:41:49 -0300
Subject: [media] media: video: pvrusb2: fix memory leak

Use put_device() instead of kfree() because of device name leak.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pvrusb2/pvrusb2-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 3d7e5aab547f..281806b2df62 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -647,7 +647,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 	if (ret) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 			   "device_register failed");
-		kfree(class_dev);
+		put_device(class_dev);
 		return;
 	}
 
-- 
cgit v1.2.3


From b9218f2f15cdff8991ba041993bf40962c49fdd0 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 27 Dec 2010 12:22:46 -0300
Subject: [media] saa6588: rename rds.h to saa6588.h

The naming of the media/rds.h header suggested that it was a generic
RDS header, when in fact it is just a saa6588 module API that is
internal to the kernel.

Rename the header and the struct and defines in it to make this clear.

Also removed the header include in radio-si470x.h (not used anymore)
and from ioctl-number.txt (it's internal to the kernel and never called
from userspace).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/si470x/radio-si470x.h   |  1 -
 drivers/media/video/bt8xx/bttv-driver.c     | 14 +++++++-------
 drivers/media/video/saa6588.c               | 14 +++++++-------
 drivers/media/video/saa7134/saa7134-video.c | 14 +++++++-------
 4 files changed, 21 insertions(+), 22 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
index b9914d7a0c9f..4a4e908db04c 100644
--- a/drivers/media/radio/si470x/radio-si470x.h
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -37,7 +37,6 @@
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/rds.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 961d0805d877..849cd170b821 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -55,7 +55,7 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-#include <media/rds.h>
+#include <media/saa6588.h>
 
 
 unsigned int bttv_num;			/* number of Bt848s in use */
@@ -3388,7 +3388,7 @@ static int radio_release(struct file *file)
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
 	v4l2_prio_close(&btv->prio, fh->prio);
 	file->private_data = NULL;
@@ -3396,7 +3396,7 @@ static int radio_release(struct file *file)
 
 	btv->radio_user--;
 
-	bttv_call_all(btv, core, ioctl, RDS_CMD_CLOSE, &cmd);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
 
 	return 0;
 }
@@ -3523,13 +3523,13 @@ static ssize_t radio_read(struct file *file, char __user *data,
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	cmd.block_count = count/3;
 	cmd.buffer = data;
 	cmd.instance = file;
 	cmd.result = -ENODEV;
 
-	bttv_call_all(btv, core, ioctl, RDS_CMD_READ, &cmd);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd);
 
 	return cmd.result;
 }
@@ -3538,11 +3538,11 @@ static unsigned int radio_poll(struct file *file, poll_table *wait)
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	cmd.instance = file;
 	cmd.event_list = wait;
 	cmd.result = -ENODEV;
-	bttv_call_all(btv, core, ioctl, RDS_CMD_POLL, &cmd);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd);
 
 	return cmd.result;
 }
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index 984c0feb2a4e..99a2ac16f9e5 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -31,7 +31,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 
-#include <media/rds.h>
+#include <media/saa6588.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 
@@ -181,7 +181,7 @@ static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf)
 	return 1;
 }
 
-static void read_from_buf(struct saa6588 *s, struct rds_command *a)
+static void read_from_buf(struct saa6588 *s, struct saa6588_command *a)
 {
 	unsigned long flags;
 
@@ -392,25 +392,25 @@ static void saa6588_configure(struct saa6588 *s)
 static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 {
 	struct saa6588 *s = to_saa6588(sd);
-	struct rds_command *a = arg;
+	struct saa6588_command *a = arg;
 
 	switch (cmd) {
 		/* --- open() for /dev/radio --- */
-	case RDS_CMD_OPEN:
+	case SAA6588_CMD_OPEN:
 		a->result = 0;	/* return error if chip doesn't work ??? */
 		break;
 		/* --- close() for /dev/radio --- */
-	case RDS_CMD_CLOSE:
+	case SAA6588_CMD_CLOSE:
 		s->data_available_for_read = 1;
 		wake_up_interruptible(&s->read_queue);
 		a->result = 0;
 		break;
 		/* --- read() for /dev/radio --- */
-	case RDS_CMD_READ:
+	case SAA6588_CMD_READ:
 		read_from_buf(s, a);
 		break;
 		/* --- poll() for /dev/radio --- */
-	case RDS_CMD_POLL:
+	case SAA6588_CMD_POLL:
 		a->result = 0;
 		if (s->data_available_for_read) {
 			a->result |= POLLIN | POLLRDNORM;
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index ad22be27bd38..ee4ea5f001a8 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -30,7 +30,7 @@
 #include "saa7134-reg.h"
 #include "saa7134.h"
 #include <media/v4l2-common.h>
-#include <media/rds.h>
+#include <media/saa6588.h>
 
 /* ------------------------------------------------------------------ */
 
@@ -1459,7 +1459,7 @@ static int video_release(struct file *file)
 {
 	struct saa7134_fh  *fh  = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	unsigned long flags;
 
 	/* turn off overlay */
@@ -1494,7 +1494,7 @@ static int video_release(struct file *file)
 
 	saa_call_all(dev, core, s_power, 0);
 	if (fh->radio)
-		saa_call_all(dev, core, ioctl, RDS_CMD_CLOSE, &cmd);
+		saa_call_all(dev, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
 
 	/* free stuff */
 	videobuf_mmap_free(&fh->cap);
@@ -1520,14 +1520,14 @@ static ssize_t radio_read(struct file *file, char __user *data,
 {
 	struct saa7134_fh *fh = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
 	cmd.block_count = count/3;
 	cmd.buffer = data;
 	cmd.instance = file;
 	cmd.result = -ENODEV;
 
-	saa_call_all(dev, core, ioctl, RDS_CMD_READ, &cmd);
+	saa_call_all(dev, core, ioctl, SAA6588_CMD_READ, &cmd);
 
 	return cmd.result;
 }
@@ -1536,12 +1536,12 @@ static unsigned int radio_poll(struct file *file, poll_table *wait)
 {
 	struct saa7134_fh *fh = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
 	cmd.instance = file;
 	cmd.event_list = wait;
 	cmd.result = -ENODEV;
-	saa_call_all(dev, core, ioctl, RDS_CMD_POLL, &cmd);
+	saa_call_all(dev, core, ioctl, SAA6588_CMD_POLL, &cmd);
 
 	return cmd.result;
 }
-- 
cgit v1.2.3


From d85185902fb669a92d4934b926f8016368e1ad06 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 06:55:01 -0300
Subject: [media] gspca - main: Fix some warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 80b31ebb5b95..442970073e8a 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1297,17 +1297,19 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		ret = -ENODEV;
 		goto out;
 	}
-	strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver);
+	strncpy((char *) cap->driver, gspca_dev->sd_desc->name,
+			sizeof cap->driver);
 	if (gspca_dev->dev->product != NULL) {
-		strncpy(cap->card, gspca_dev->dev->product,
+		strncpy((char *) cap->card, gspca_dev->dev->product,
 			sizeof cap->card);
 	} else {
-		snprintf(cap->card, sizeof cap->card,
+		snprintf((char *) cap->card, sizeof cap->card,
 			"USB Camera (%04x:%04x)",
 			le16_to_cpu(gspca_dev->dev->descriptor.idVendor),
 			le16_to_cpu(gspca_dev->dev->descriptor.idProduct));
 	}
-	usb_make_path(gspca_dev->dev, cap->bus_info, sizeof(cap->bus_info));
+	usb_make_path(gspca_dev->dev, (char *) cap->bus_info,
+			sizeof(cap->bus_info));
 	cap->version = DRIVER_VERSION_NUMBER;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
-- 
cgit v1.2.3


From 0aeb5ec74b0a95f1699040f0262a6fd5507d6e8f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 06:59:04 -0300
Subject: [media] gspca - pac7302/pac7311: Fix some warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7302.c | 2 +-
 drivers/media/video/gspca/pac7311.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
index 55fbea7381b0..2700975abce5 100644
--- a/drivers/media/video/gspca/pac7302.c
+++ b/drivers/media/video/gspca/pac7302.c
@@ -393,7 +393,7 @@ static const __u8 page3_7302[] = {
 
 static void reg_w_buf(struct gspca_dev *gspca_dev,
 		  __u8 index,
-		  const char *buffer, int len)
+		  const u8 *buffer, int len)
 {
 	int ret;
 
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 7657b43b3203..6820f5d58b19 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -261,7 +261,7 @@ static const __u8 page4_7311[] = {
 
 static void reg_w_buf(struct gspca_dev *gspca_dev,
 		  __u8 index,
-		  const char *buffer, int len)
+		  const u8 *buffer, int len)
 {
 	int ret;
 
-- 
cgit v1.2.3


From 2bbf53bd176e36d1574eeec53bf710d94703535e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:01:04 -0300
Subject: [media] gspca: Bad comment
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 3c8a63bbc172..97b77a26a2eb 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -62,7 +62,7 @@ struct gspca_ctrl {
 /* device information - set at probe time */
 struct cam {
 	const struct v4l2_pix_format *cam_mode;	/* size nmodes */
-	const struct framerates *mode_framerates; /* must have size nmode,
+	const struct framerates *mode_framerates; /* must have size nmodes,
 						   * just like cam_mode */
 	struct gspca_ctrl *ctrls;	/* control table - size nctrls */
 					/* may be NULL */
-- 
cgit v1.2.3


From 7d55a84b0af47b2ec55e16c6dbc8df62a72ac749 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:02:32 -0300
Subject: [media] gspca - zc3xx: Keep sorted the device table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/zc3xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 042dc808593f..6ab23844ce24 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7066,8 +7066,8 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08af)},
 	{USB_DEVICE(0x046d, 0x08b9)},
 	{USB_DEVICE(0x046d, 0x08d7)},
-	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08d8)},
+	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08da)},
 	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
 	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
-- 
cgit v1.2.3


From 49fb5e60f7e907126aac10af6577fac6fde684f6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:09:34 -0300
Subject: [media] gspca - zc3xx: Use the new video control mechanism
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/zc3xx.c | 228 +++++++++-----------------------------
 1 file changed, 52 insertions(+), 176 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 6ab23844ce24..48b880283b63 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -35,16 +35,23 @@ static int force_sensor = -1;
 #define QUANT_VAL 1		/* quantization table */
 #include "zc3xx-reg.h"
 
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	CONTRAST,
+	GAMMA,
+	AUTOGAIN,
+	LIGHTFREQ,
+	SHARPNESS,
+	NCTRLS		/* number of controls */
+};
+
 /* specific webcam descriptor */
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	u8 brightness;
-	u8 contrast;
-	u8 gamma;
-	u8 autogain;
-	u8 lightfreq;
-	u8 sharpness;
+	struct gspca_ctrl ctrls[NCTRLS];
+
 	u8 quality;			/* image quality */
 #define QUALITY_MIN 50
 #define QUALITY_MAX 80
@@ -84,21 +91,13 @@ enum sensors {
 };
 
 /* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-
-static const struct ctrl sd_ctrls[] = {
-	{
+static void setcontrast(struct gspca_dev *gspca_dev);
+static void setautogain(struct gspca_dev *gspca_dev);
+static void setlightfreq(struct gspca_dev *gspca_dev);
+static void setsharpness(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRLS] = {
+[BRIGHTNESS] = {
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -106,13 +105,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-#define BRIGHTNESS_DEF 128
-		.default_value = BRIGHTNESS_DEF,
+		.default_value = 128,
 	    },
-	    .set = sd_setbrightness,
-	    .get = sd_getbrightness,
+	    .set_control = setcontrast
 	},
-	{
+[CONTRAST] = {
 	    {
 		.id      = V4L2_CID_CONTRAST,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -120,13 +117,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-#define CONTRAST_DEF 128
-		.default_value = CONTRAST_DEF,
+		.default_value = 128,
 	    },
-	    .set = sd_setcontrast,
-	    .get = sd_getcontrast,
+	    .set_control = setcontrast
 	},
-	{
+[GAMMA] = {
 	    {
 		.id      = V4L2_CID_GAMMA,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -136,10 +131,9 @@ static const struct ctrl sd_ctrls[] = {
 		.step    = 1,
 		.default_value = 4,
 	    },
-	    .set = sd_setgamma,
-	    .get = sd_getgamma,
+	    .set_control = setcontrast
 	},
-	{
+[AUTOGAIN] = {
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
 		.type    = V4L2_CTRL_TYPE_BOOLEAN,
@@ -147,14 +141,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step    = 1,
-#define AUTOGAIN_DEF 1
-		.default_value = AUTOGAIN_DEF,
+		.default_value = 1,
 	    },
-	    .set = sd_setautogain,
-	    .get = sd_getautogain,
+	    .set_control = setautogain
 	},
-#define LIGHTFREQ_IDX 4
-	{
+[LIGHTFREQ] = {
 	    {
 		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
 		.type    = V4L2_CTRL_TYPE_MENU,
@@ -162,13 +153,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
 		.step    = 1,
-#define FREQ_DEF 0
-		.default_value = FREQ_DEF,
+		.default_value = 0,
 	    },
-	    .set = sd_setfreq,
-	    .get = sd_getfreq,
+	    .set_control = setlightfreq
 	},
-	{
+[SHARPNESS] = {
 	    {
 		.id	 = V4L2_CID_SHARPNESS,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -176,11 +165,9 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 3,
 		.step    = 1,
-#define SHARPNESS_DEF 2
-		.default_value = SHARPNESS_DEF,
+		.default_value = 2,
 	    },
-	    .set = sd_setsharpness,
-	    .get = sd_getsharpness,
+	    .set_control = setsharpness
 	},
 };
 
@@ -5875,7 +5862,7 @@ static void setsharpness(struct gspca_dev *gspca_dev)
 		{0x10, 0x1e}
 	};
 
-	sharpness = sd->sharpness;
+	sharpness = sd->ctrls[SHARPNESS].val;
 	reg_w(gspca_dev, sharpness_tb[sharpness][0], 0x01c6);
 	reg_r(gspca_dev, 0x01c8);
 	reg_r(gspca_dev, 0x01c9);
@@ -5910,10 +5897,10 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		 0xe0, 0xeb, 0xf4, 0xff, 0xff, 0xff, 0xff, 0xff},
 	};
 
-	Tgamma = gamma_tb[sd->gamma - 1];
+	Tgamma = gamma_tb[sd->ctrls[GAMMA].val - 1];
 
-	contrast = ((int) sd->contrast - 128);		/* -128 / 127 */
-	brightness = ((int) sd->brightness - 128);	/* -128 / 92 */
+	contrast = ((int) sd->ctrls[CONTRAST].val - 128); /* -128 / 127 */
+	brightness = ((int) sd->ctrls[BRIGHTNESS].val - 128); /* -128 / 92 */
 	adj = 0;
 	gp1 = gp2 = 0;
 	for (i = 0; i < 16; i++) {
@@ -6060,8 +6047,8 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 		 tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
 	};
 
-	i = sd->lightfreq * 2;
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	i = sd->ctrls[LIGHTFREQ].val * 2;
+	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
 	if (mode)
 		i++;			/* 320x240 */
 	zc3_freq = freq_tb[sd->sensor][i];
@@ -6070,14 +6057,14 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 	usb_exchange(gspca_dev, zc3_freq);
 	switch (sd->sensor) {
 	case SENSOR_GC0305:
-		if (mode			/* if 320x240 */
-		    && sd->lightfreq == 1)	/* and 50Hz */
+		if (mode				/* if 320x240 */
+		    && sd->ctrls[LIGHTFREQ].val == 1)	/* and 50Hz */
 			reg_w(gspca_dev, 0x85, 0x018d);
 					/* win: 0x80, 0x018d */
 		break;
 	case SENSOR_OV7620:
-		if (!mode) {			/* if 640x480 */
-			if (sd->lightfreq != 0)	/* and 50 or 60 Hz */
+		if (!mode) {				/* if 640x480 */
+			if (sd->ctrls[LIGHTFREQ].val != 0) /* and filter */
 				reg_w(gspca_dev, 0x40, 0x0002);
 			else
 				reg_w(gspca_dev, 0x44, 0x0002);
@@ -6094,7 +6081,7 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	u8 autoval;
 
-	if (sd->autogain)
+	if (sd->ctrls[AUTOGAIN].val)
 		autoval = 0x42;
 	else
 		autoval = 0x02;
@@ -6421,11 +6408,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	/* define some sensors from the vendor/product */
 	sd->sensor = id->driver_info;
 
-	sd->sharpness = SHARPNESS_DEF;
-	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
-	sd->autogain = AUTOGAIN_DEF;
-	sd->lightfreq = FREQ_DEF;
+	gspca_dev->cam.ctrls = sd->ctrls;
 	sd->quality = QUALITY_DEF;
 
 	return 0;
@@ -6588,7 +6571,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		case 0x2030:
 			PDEBUG(D_PROBE, "Find Sensor PO2030");
 			sd->sensor = SENSOR_PO2030;
-			sd->sharpness = 0;		/* from win traces */
+			sd->ctrls[SHARPNESS].def = 0;	/* from win traces */
 			break;
 		case 0x7620:
 			PDEBUG(D_PROBE, "Find Sensor OV7620");
@@ -6629,11 +6612,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		cam->nmodes = ARRAY_SIZE(broken_vga_mode);
 		break;
 	}
-	sd->gamma = gamma[sd->sensor];
+
+	sd->ctrls[GAMMA].def = gamma[sd->sensor];
 
 	switch (sd->sensor) {
 	case SENSOR_OV7630C:
-		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ);
 		break;
 	}
 
@@ -6843,114 +6827,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
 
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->brightness = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->brightness;
-	return 0;
-}
-
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->contrast;
-	return 0;
-}
-
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->autogain = val;
-	if (gspca_dev->streaming)
-		setautogain(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->autogain;
-	return 0;
-}
-
-static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->gamma = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->gamma;
-	return 0;
-}
-
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->lightfreq = val;
-	if (gspca_dev->streaming)
-		setlightfreq(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->lightfreq;
-	return 0;
-}
-
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->sharpness = val;
-	if (gspca_dev->streaming)
-		setsharpness(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->sharpness;
-	return 0;
-}
-
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 			struct v4l2_querymenu *menu)
 {
-- 
cgit v1.2.3


From 7fbee99aa2c73bdf47add9de58f646fa7713e7e5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:17:40 -0300
Subject: [media] gspca - zc3xx: The sensor of the VF0250 is a GC0303
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/zc3xx.c | 60 +++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 48b880283b63..14b85d483163 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -71,6 +71,7 @@ enum sensors {
 	SENSOR_ADCM2700,
 	SENSOR_CS2102,
 	SENSOR_CS2102K,
+	SENSOR_GC0303,
 	SENSOR_GC0305,
 	SENSOR_HDCS2020b,
 	SENSOR_HV7131B,
@@ -86,7 +87,6 @@ enum sensors {
 	SENSOR_PB0330,
 	SENSOR_PO2030,
 	SENSOR_TAS5130C,
-	SENSOR_TAS5130C_VF0250,
 	SENSOR_MAX
 };
 
@@ -5393,7 +5393,7 @@ static const struct usb_action tas5130c_NoFlikerScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_InitialScale[] = {
+static const struct usb_action gc0303_InitialScale[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},		/* 00,00,01,cc, */
 	{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},		/* 00,08,02,cc, */
 	{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},	/* 00,10,01,cc, */
@@ -5460,7 +5460,7 @@ static const struct usb_action tas5130c_vf0250_InitialScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_Initial[] = {
+static const struct usb_action gc0303_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},		/* 00,00,01,cc, */
 	{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},		/* 00,08,02,cc, */
 	{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},	/* 00,10,01,cc, */
@@ -5525,7 +5525,7 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
 	{0xa0, 0x65, ZC3XX_R118_BGAIN},		/* 01,18,65,cc */
 	{}
 };
-static const struct usb_action tas5130c_vf0250_50HZScale[] = {
+static const struct usb_action gc0303_50HZScale[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0001},		/* 00,83,01,aa */
 	{0xaa, 0x84, 0x00aa},		/* 00,84,aa,aa */
@@ -5549,7 +5549,7 @@ static const struct usb_action tas5130c_vf0250_50HZScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_50HZ[] = {
+static const struct usb_action gc0303_50HZ[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0003},		/* 00,83,03,aa */
 	{0xaa, 0x84, 0x0054},		/* 00,84,54,aa */
@@ -5573,7 +5573,7 @@ static const struct usb_action tas5130c_vf0250_50HZ[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_60HZScale[] = {
+static const struct usb_action gc0303_60HZScale[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0001},		/* 00,83,01,aa */
 	{0xaa, 0x84, 0x0062},		/* 00,84,62,aa */
@@ -5597,7 +5597,7 @@ static const struct usb_action tas5130c_vf0250_60HZScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_60HZ[] = {
+static const struct usb_action gc0303_60HZ[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0002},		/* 00,83,02,aa */
 	{0xaa, 0x84, 0x00c4},		/* 00,84,c4,aa */
@@ -5621,7 +5621,7 @@ static const struct usb_action tas5130c_vf0250_60HZ[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
+static const struct usb_action gc0303_NoFlikerScale[] = {
 	{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE},		/* 01,00,0c,cc, */
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0000},		/* 00,83,00,aa */
@@ -5643,7 +5643,7 @@ static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_NoFliker[] = {
+static const struct usb_action gc0303_NoFliker[] = {
 	{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE},		/* 01,00,0c,cc, */
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0000},		/* 00,83,00,aa */
@@ -5820,12 +5820,13 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 		{0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
 	static const u8 tas5130c_matrix[9] =
 		{0x68, 0xec, 0xec, 0xec, 0x68, 0xec, 0xec, 0xec, 0x68};
-	static const u8 vf0250_matrix[9] =
+	static const u8 gc0303_matrix[9] =
 		{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
 	static const u8 *matrix_tb[SENSOR_MAX] = {
 		[SENSOR_ADCM2700] =	adcm2700_matrix,
 		[SENSOR_CS2102] =	ov7620_matrix,
 		[SENSOR_CS2102K] =	NULL,
+		[SENSOR_GC0303] =	gc0303_matrix,
 		[SENSOR_GC0305] =	gc0305_matrix,
 		[SENSOR_HDCS2020b] =	NULL,
 		[SENSOR_HV7131B] =	NULL,
@@ -5841,7 +5842,6 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	gc0305_matrix,
 		[SENSOR_PO2030] =	po2030_matrix,
 		[SENSOR_TAS5130C] =	tas5130c_matrix,
-		[SENSOR_TAS5130C_VF0250] = vf0250_matrix,
 	};
 
 	matrix = matrix_tb[sd->sensor];
@@ -5981,6 +5981,10 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 		{cs2102_NoFliker, cs2102_NoFlikerScale,
 		 NULL, NULL, /* currently disabled */
 		 NULL, NULL},
+	[SENSOR_GC0303] =
+		{gc0303_NoFliker, gc0303_NoFlikerScale,
+		 gc0303_50HZ, gc0303_50HZScale,
+		 gc0303_60HZ, gc0303_60HZScale},
 	[SENSOR_GC0305] =
 		{gc0305_NoFliker, gc0305_NoFliker,
 		 gc0305_50HZ, gc0305_50HZ,
@@ -6041,10 +6045,6 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 		{tas5130c_NoFliker, tas5130c_NoFlikerScale,
 		 tas5130c_50HZ, tas5130c_50HZScale,
 		 tas5130c_60HZ, tas5130c_60HZScale},
-	[SENSOR_TAS5130C_VF0250] =
-		{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
-		 tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
-		 tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
 	};
 
 	i = sd->ctrls[LIGHTFREQ].val * 2;
@@ -6317,8 +6317,8 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	retword = i2c_read(gspca_dev, 0x00);
 	if (retword != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type %02x", retword);
-		if (retword == 0x0011)			/* VF0250 */
-			return 0x0250;
+		if (retword == 0x0011)			/* gc0303 */
+			return 0x0303;
 		if (retword == 0x0029)			/* gc0305 */
 			send_unknown(gspca_dev, SENSOR_GC0305);
 		return retword;
@@ -6379,7 +6379,7 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 	switch (sd->sensor) {
 	case SENSOR_MC501CB:
 		return -1;		/* don't probe */
-	case SENSOR_TAS5130C_VF0250:
+	case SENSOR_GC0303:
 			/* may probe but with no write in reg 0x0010 */
 		return -1;		/* don't probe */
 	case SENSOR_PAS106:
@@ -6424,6 +6424,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_ADCM2700] =	4,
 		[SENSOR_CS2102] =	4,
 		[SENSOR_CS2102K] =	5,
+		[SENSOR_GC0303] =	3,
 		[SENSOR_GC0305] =	4,
 		[SENSOR_HDCS2020b] =	4,
 		[SENSOR_HV7131B] =	4,
@@ -6439,12 +6440,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	4,
 		[SENSOR_PO2030] =	4,
 		[SENSOR_TAS5130C] =	3,
-		[SENSOR_TAS5130C_VF0250] = 3,
 	};
 	static const u8 mode_tb[SENSOR_MAX] = {
 		[SENSOR_ADCM2700] =	2,
 		[SENSOR_CS2102] =	1,
 		[SENSOR_CS2102K] =	1,
+		[SENSOR_GC0303] =	1,
 		[SENSOR_GC0305] =	1,
 		[SENSOR_HDCS2020b] =	1,
 		[SENSOR_HV7131B] =	1,
@@ -6460,7 +6461,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	1,
 		[SENSOR_PO2030] =	1,
 		[SENSOR_TAS5130C] =	1,
-		[SENSOR_TAS5130C_VF0250] = 1,
 	};
 
 	sensor = zcxx_probeSensor(gspca_dev);
@@ -6476,8 +6476,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			case SENSOR_MC501CB:
 				PDEBUG(D_PROBE, "Sensor MC501CB");
 				break;
-			case SENSOR_TAS5130C_VF0250:
-				PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
+			case SENSOR_GC0303:
+				PDEBUG(D_PROBE, "Sensor GC0303");
 				break;
 			default:
 				warn("Unknown sensor - set to TAS5130C");
@@ -6564,9 +6564,9 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			PDEBUG(D_PROBE, "Find Sensor GC0305");
 			sd->sensor = SENSOR_GC0305;
 			break;
-		case 0x0250:
-			PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
-			sd->sensor =  SENSOR_TAS5130C_VF0250;
+		case 0x0303:
+			PDEBUG(D_PROBE, "Sensor GC0303");
+			sd->sensor =  SENSOR_GC0303;
 			break;
 		case 0x2030:
 			PDEBUG(D_PROBE, "Find Sensor PO2030");
@@ -6637,6 +6637,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			{cs2102_Initial, cs2102_InitialScale},
 	[SENSOR_CS2102K] =
 			{cs2102K_Initial, cs2102K_InitialScale},
+	[SENSOR_GC0303] =
+		{gc0303_Initial, gc0303_InitialScale},
 	[SENSOR_GC0305] =
 			{gc0305_Initial, gc0305_InitialScale},
 	[SENSOR_HDCS2020b] =
@@ -6667,8 +6669,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			{po2030_Initial, po2030_InitialScale},
 	[SENSOR_TAS5130C] =
 			{tas5130c_Initial, tas5130c_InitialScale},
-	[SENSOR_TAS5130C_VF0250] =
-		{tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
 	};
 
 	/* create the JPEG header */
@@ -6693,7 +6693,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7620:
 	case SENSOR_PO2030:
 	case SENSOR_TAS5130C:
-	case SENSOR_TAS5130C_VF0250:
+	case SENSOR_GC0303:
 /*		msleep(100);			 * ?? */
 		reg_r(gspca_dev, 0x0002);	/* --> 0x40 */
 		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
@@ -6921,8 +6921,8 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
-	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
-	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_GC0303},
+	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_GC0303},
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
 	{USB_DEVICE(0x0458, 0x700f)},
-- 
cgit v1.2.3


From 7e5f9059a807ce9b7a12b2402f5aeae9557c8049 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:24:18 -0300
Subject: [media] gspca - vc032x: Cleanup source
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/vc032x.c | 74 ++++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 34 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 38a6efe1a5f9..9b2ae1b6cc75 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -47,24 +47,29 @@ struct sd {
 	u8 image_offset;
 
 	u8 bridge;
-#define BRIDGE_VC0321 0
-#define BRIDGE_VC0323 1
 	u8 sensor;
-#define SENSOR_HV7131R 0
-#define SENSOR_MI0360 1
-#define SENSOR_MI1310_SOC 2
-#define SENSOR_MI1320 3
-#define SENSOR_MI1320_SOC 4
-#define SENSOR_OV7660 5
-#define SENSOR_OV7670 6
-#define SENSOR_PO1200 7
-#define SENSOR_PO3130NC 8
-#define SENSOR_POxxxx 9
 	u8 flags;
 #define FL_SAMSUNG 0x01		/* SamsungQ1 (2 sensors) */
 #define FL_HFLIP 0x02		/* mirrored by default */
 #define FL_VFLIP 0x04		/* vertical flipped by default */
 };
+enum bridges {
+	BRIDGE_VC0321,
+	BRIDGE_VC0323,
+};
+enum sensors {
+	SENSOR_HV7131R,
+	SENSOR_MI0360,
+	SENSOR_MI1310_SOC,
+	SENSOR_MI1320,
+	SENSOR_MI1320_SOC,
+	SENSOR_OV7660,
+	SENSOR_OV7670,
+	SENSOR_PO1200,
+	SENSOR_PO3130NC,
+	SENSOR_POxxxx,
+	NSENSORS
+};
 
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
@@ -260,56 +265,56 @@ static const struct ctrl sd_ctrls[] = {
 };
 
 /* table of the disabled controls */
-static u32 ctrl_dis[] = {
-/* SENSOR_HV7131R 0 */
+static u32 ctrl_dis[NSENSORS] = {
+    [SENSOR_HV7131R] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI0360 1 */
+    [SENSOR_MI0360] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1310_SOC 2 */
+    [SENSOR_MI1310_SOC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1320 3 */
+    [SENSOR_MI1320] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1320_SOC 4 */
+    [SENSOR_MI1320_SOC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_OV7660 5 */
+    [SENSOR_OV7660] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_OV7670 6 */
+    [SENSOR_OV7670] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_PO1200 7 */
+    [SENSOR_PO1200] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_PO3130NC 8 */
+    [SENSOR_PO3130NC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_POxxxx 9 */
+    [SENSOR_POxxxx] =
 	(1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
 };
 
@@ -3420,17 +3425,18 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sensor;
-	static u8 npkt[] = {	/* number of packets per ISOC message */
-		64,		/* HV7131R 0 */
-		32,		/* MI0360 1 */
-		32,		/* MI1310_SOC 2 */
-		64,		/* MI1320 3 */
-		128,		/* MI1320_SOC 4 */
-		32,		/* OV7660 5 */
-		64,		/* OV7670 6 */
-		128,		/* PO1200 7 */
-		128,		/* PO3130NC 8 */
-		128,		/* POxxxx 9 */
+	/* number of packets per ISOC message */
+	static u8 npkt[NSENSORS] = {
+		[SENSOR_HV7131R] =	64,
+		[SENSOR_MI0360] =	32,
+		[SENSOR_MI1310_SOC] =	32,
+		[SENSOR_MI1320] =	64,
+		[SENSOR_MI1320_SOC] =	128,
+		[SENSOR_OV7660] =	32,
+		[SENSOR_OV7670] =	64,
+		[SENSOR_PO1200] =	128,
+		[SENSOR_PO3130NC] =	128,
+		[SENSOR_POxxxx] =	128,
 	};
 
 	if (sd->sensor != SENSOR_POxxxx)
-- 
cgit v1.2.3


From 71e84ea7f082eb02df6ef40f55d2c4a998f6e1df Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:35:27 -0300
Subject: [media] gspca - stv06xx/st6422: Use the new video control mechanism
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.c | 272 +++++++++------------
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.h |  10 -
 2 files changed, 118 insertions(+), 164 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index 42f3a1e41188..8a456de4970a 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -28,6 +28,20 @@
 
 #include "stv06xx_st6422.h"
 
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	CONTRAST,
+	GAIN,
+	EXPOSURE,
+	NCTRLS		/* number of controls */
+};
+
+/* sensor settings */
+struct st6422_settings {
+	struct gspca_ctrl ctrls[NCTRLS];
+};
+
 static struct v4l2_pix_format st6422_mode[] = {
 	/* Note we actually get 124 lines of data, of which we skip the 4st
 	   4 as they are garbage */
@@ -57,9 +71,14 @@ static struct v4l2_pix_format st6422_mode[] = {
 	},
 };
 
-static const struct ctrl st6422_ctrl[] = {
-#define BRIGHTNESS_IDX 0
-	{
+/* V4L2 controls supported by the driver */
+static void st6422_set_brightness(struct gspca_dev *gspca_dev);
+static void st6422_set_contrast(struct gspca_dev *gspca_dev);
+static void st6422_set_gain(struct gspca_dev *gspca_dev);
+static void st6422_set_exposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl st6422_ctrl[NCTRLS] = {
+[BRIGHTNESS] = {
 		{
 			.id		= V4L2_CID_BRIGHTNESS,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -69,11 +88,9 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 3
 		},
-		.set = st6422_set_brightness,
-		.get = st6422_get_brightness
+		.set_control = st6422_set_brightness
 	},
-#define CONTRAST_IDX 1
-	{
+[CONTRAST] = {
 		{
 			.id		= V4L2_CID_CONTRAST,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -83,11 +100,9 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 11
 		},
-		.set = st6422_set_contrast,
-		.get = st6422_get_contrast
+		.set_control = st6422_set_contrast
 	},
-#define GAIN_IDX 2
-	{
+[GAIN] = {
 		{
 			.id		= V4L2_CID_GAIN,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -97,49 +112,43 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 64
 		},
-		.set = st6422_set_gain,
-		.get = st6422_get_gain
+		.set_control = st6422_set_gain
 	},
-#define EXPOSURE_IDX 3
-	{
+[EXPOSURE] = {
 		{
 			.id		= V4L2_CID_EXPOSURE,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
 			.name		= "Exposure",
 			.minimum	= 0,
-			.maximum	= 1023,
+#define EXPOSURE_MAX 1023
+			.maximum	= EXPOSURE_MAX,
 			.step		= 1,
 			.default_value  = 256
 		},
-		.set = st6422_set_exposure,
-		.get = st6422_get_exposure
+		.set_control = st6422_set_exposure
 	},
 };
 
 static int st6422_probe(struct sd *sd)
 {
-	int i;
-	s32 *sensor_settings;
+	struct st6422_settings *sensor_settings;
 
 	if (sd->bridge != BRIDGE_ST6422)
 		return -ENODEV;
 
 	info("st6422 sensor detected");
 
-	sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32),
-				  GFP_KERNEL);
+	sensor_settings = kmalloc(sizeof *sensor_settings, GFP_KERNEL);
 	if (!sensor_settings)
 		return -ENOMEM;
 
 	sd->gspca_dev.cam.cam_mode = st6422_mode;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode);
+	sd->gspca_dev.cam.ctrls = sensor_settings->ctrls;
 	sd->desc.ctrls = st6422_ctrl;
 	sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl);
 	sd->sensor_priv = sensor_settings;
 
-	for (i = 0; i < sd->desc.nctrls; i++)
-		sensor_settings[i] = st6422_ctrl[i].qctrl.default_value;
-
 	return 0;
 }
 
@@ -234,77 +243,92 @@ static void st6422_disconnect(struct sd *sd)
 	kfree(sd->sensor_priv);
 }
 
-static int st6422_start(struct sd *sd)
+static int setbrightness(struct sd *sd)
+{
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+
+	/* val goes from 0 -> 31 */
+	return stv06xx_write_bridge(sd, 0x1432,
+			sensor_settings->ctrls[BRIGHTNESS].val);
+}
+
+static int setcontrast(struct sd *sd)
+{
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+
+	/* Val goes from 0 -> 15 */
+	return stv06xx_write_bridge(sd, 0x143a,
+			sensor_settings->ctrls[CONTRAST].val | 0xf0);
+}
+
+static int setgain(struct sd *sd)
 {
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+	u8 gain;
 	int err;
-	struct cam *cam = &sd->gspca_dev.cam;
-	s32 *sensor_settings = sd->sensor_priv;
 
-	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
-		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
-	else
-		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
-	if (err < 0)
-		return err;
+	gain = sensor_settings->ctrls[GAIN].val;
 
-	err = st6422_set_brightness(&sd->gspca_dev,
-				    sensor_settings[BRIGHTNESS_IDX]);
+	/* Set red, green, blue, gain */
+	err = stv06xx_write_bridge(sd, 0x0509, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_contrast(&sd->gspca_dev,
-				  sensor_settings[CONTRAST_IDX]);
+	err = stv06xx_write_bridge(sd, 0x050a, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_exposure(&sd->gspca_dev,
-				  sensor_settings[EXPOSURE_IDX]);
+	err = stv06xx_write_bridge(sd, 0x050b, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_gain(&sd->gspca_dev,
-			      sensor_settings[GAIN_IDX]);
+	/* 2 mystery writes */
+	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
 	if (err < 0)
 		return err;
 
-	PDEBUG(D_STREAM, "Starting stream");
-
-	return 0;
+	return stv06xx_write_bridge(sd, 0x050d, 0x01);
 }
 
-static int st6422_stop(struct sd *sd)
+static int setexposure(struct sd *sd)
 {
-	PDEBUG(D_STREAM, "Halting stream");
-
-	return 0;
-}
-
-static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[BRIGHTNESS_IDX];
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+	u16 expo;
+	int err;
 
-	PDEBUG(D_V4L2, "Read brightness %d", *val);
+	expo = sensor_settings->ctrls[EXPOSURE].val;
+	err = stv06xx_write_bridge(sd, 0x143d, expo & 0xff);
+	if (err < 0)
+		return err;
 
-	return 0;
+	return stv06xx_write_bridge(sd, 0x143e, expo >> 8);
 }
 
-static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+static int st6422_start(struct sd *sd)
 {
 	int err;
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
+	struct cam *cam = &sd->gspca_dev.cam;
 
-	sensor_settings[BRIGHTNESS_IDX] = val;
+	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
+		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
+	else
+		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
+	if (err < 0)
+		return err;
 
-	if (!gspca_dev->streaming)
-		return 0;
+	err = setbrightness(sd);
+	if (err < 0)
+		return err;
 
-	/* val goes from 0 -> 31 */
-	PDEBUG(D_V4L2, "Set brightness to %d", val);
-	err = stv06xx_write_bridge(sd, 0x1432, val);
+	err = setcontrast(sd);
+	if (err < 0)
+		return err;
+
+	err = setexposure(sd);
+	if (err < 0)
+		return err;
+
+	err = setgain(sd);
 	if (err < 0)
 		return err;
 
@@ -313,125 +337,65 @@ static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
 	return (err < 0) ? err : 0;
 }
 
-static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val)
+static int st6422_stop(struct sd *sd)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[CONTRAST_IDX];
-
-	PDEBUG(D_V4L2, "Read contrast %d", *val);
+	PDEBUG(D_STREAM, "Halting stream");
 
 	return 0;
 }
 
-static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_brightness(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	sensor_settings[CONTRAST_IDX] = val;
 
-	if (!gspca_dev->streaming)
-		return 0;
-
-	/* Val goes from 0 -> 15 */
-	PDEBUG(D_V4L2, "Set contrast to %d\n", val);
-	err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val);
-	if (err < 0)
-		return err;
+	err = setbrightness(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
-}
-
-static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[GAIN_IDX];
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
 
-	PDEBUG(D_V4L2, "Read gain %d", *val);
-
-	return 0;
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_contrast(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
 
-	sensor_settings[GAIN_IDX] = val;
-
-	if (!gspca_dev->streaming)
-		return 0;
-
-	PDEBUG(D_V4L2, "Set gain to %d", val);
-
-	/* Set red, green, blue, gain */
-	err = stv06xx_write_bridge(sd, 0x0509, val);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050a, val);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050b, val);
-	if (err < 0)
-		return err;
-
-	/* 2 mystery writes */
-	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050d, 0x01);
-	if (err < 0)
-		return err;
+	err = setcontrast(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+static void st6422_set_gain(struct gspca_dev *gspca_dev)
 {
+	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
 
-	*val = sensor_settings[EXPOSURE_IDX];
+	err = setgain(sd);
 
-	PDEBUG(D_V4L2, "Read exposure %d", *val);
+	/* commit settings */
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
 
-	return 0;
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_exposure(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	sensor_settings[EXPOSURE_IDX] = val;
-
-	if (!gspca_dev->streaming)
-		return 0;
-
-	PDEBUG(D_V4L2, "Set exposure to %d\n", val);
-	err = stv06xx_write_bridge(sd, 0x143d, val & 0xff);
-	if (err < 0)
-		return err;
 
-	err = stv06xx_write_bridge(sd, 0x143e, val >> 8);
-	if (err < 0)
-		return err;
+	err = setexposure(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+
+	gspca_dev->usb_err = err;
 }
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
index 12608aebe50b..d7498e06432b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -37,16 +37,6 @@ static int st6422_init(struct sd *sd);
 static int st6422_stop(struct sd *sd);
 static void st6422_disconnect(struct sd *sd);
 
-/* V4L2 controls supported by the driver */
-static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
-
 const struct stv06xx_sensor stv06xx_sensor_st6422 = {
 	.name = "ST6422",
 	/* No known way to lower framerate in case of less bandwidth */
-- 
cgit v1.2.3


From aa777a88b2d73f710b86b955e0c738af91e9e452 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= <moinejf@free.fr>
Date: Tue, 28 Dec 2010 07:39:13 -0300
Subject: [media] gspca - sonixj: Bad clock for om6802 in 640x480
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 901ca81e81e1..2d0bb17a30a2 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -2533,7 +2533,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		init = om6802_sensor_param1;
 		if (!mode) {			/* if 640x480 */
 			reg17 &= ~MCK_SIZE_MASK;
-			reg17 |= 0x01;		/* clock / 4 */
+			reg17 |= 0x04;		/* clock / 4 */
 		}
 		break;
 	case SENSOR_OV7630:
-- 
cgit v1.2.3


From c627b9d1f580f26fe99a8045d37a57f91e9aef66 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 18 Dec 2010 11:06:09 -0300
Subject: [media] usbvision: convert to unlocked_ioctl

Convert driver to use core-assisted locking.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/usbvision/usbvision-core.c  |  6 ++--
 drivers/media/video/usbvision/usbvision-video.c | 44 ++++---------------------
 drivers/media/video/usbvision/usbvision.h       |  2 +-
 3 files changed, 9 insertions(+), 43 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index b9dd74fde212..de58aa7d9e1d 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -2291,10 +2291,8 @@ static void call_usbvision_power_off(struct work_struct *work)
 	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, powerOffWork);
 
 	PDEBUG(DBG_FUNC, "");
-	if(mutex_lock_interruptible(&usbvision->lock)) {
+	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
 		return;
-	}
-
 
 	if(usbvision->user == 0) {
 		usbvision_i2c_unregister(usbvision);
@@ -2302,7 +2300,7 @@ static void call_usbvision_power_off(struct work_struct *work)
 		usbvision_power_off(usbvision);
 		usbvision->initialized = 0;
 	}
-	mutex_unlock(&usbvision->lock);
+	mutex_unlock(&usbvision->v4l2_lock);
 }
 
 static void usbvision_powerOffTimer(unsigned long data)
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 20da6ea2cdf0..a5709a576772 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -356,7 +356,6 @@ static int usbvision_v4l2_open(struct file *file)
 
 	PDEBUG(DBG_IO, "open");
 
-	mutex_lock(&usbvision->lock);
 	usbvision_reset_powerOffTimer(usbvision);
 
 	if (usbvision->user)
@@ -412,7 +411,6 @@ static int usbvision_v4l2_open(struct file *file)
 	usbvision_empty_framequeues(usbvision);
 
 	PDEBUG(DBG_IO, "success");
-	mutex_unlock(&usbvision->lock);
 	return errCode;
 }
 
@@ -429,7 +427,6 @@ static int usbvision_v4l2_close(struct file *file)
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	PDEBUG(DBG_IO, "close");
-	mutex_lock(&usbvision->lock);
 
 	usbvision_audio_off(usbvision);
 	usbvision_restart_isoc(usbvision);
@@ -449,8 +446,6 @@ static int usbvision_v4l2_close(struct file *file)
 		usbvision->initialized = 0;
 	}
 
-	mutex_unlock(&usbvision->lock);
-
 	if (usbvision->remove_pending) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		usbvision_release(usbvision);
@@ -597,13 +592,11 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int input)
 	if (input >= usbvision->video_inputs)
 		return -EINVAL;
 
-	mutex_lock(&usbvision->lock);
 	usbvision_muxsel(usbvision, input);
 	usbvision_set_input(usbvision);
 	usbvision_set_output(usbvision,
 			     usbvision->curwidth,
 			     usbvision->curheight);
-	mutex_unlock(&usbvision->lock);
 	return 0;
 }
 
@@ -613,9 +606,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
 
 	usbvision->tvnormId=*id;
 
-	mutex_lock(&usbvision->lock);
 	call_all(usbvision, core, s_std, usbvision->tvnormId);
-	mutex_unlock(&usbvision->lock);
 	/* propagate the change to the decoder */
 	usbvision_muxsel(usbvision, usbvision->ctl_input);
 
@@ -977,9 +968,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	usbvision->curFrame = NULL;
 
 	/* by now we are committed to the new data... */
-	mutex_lock(&usbvision->lock);
 	usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
-	mutex_unlock(&usbvision->lock);
 
 	return 0;
 }
@@ -1100,16 +1089,12 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 	PDEBUG(DBG_MMAP, "mmap");
 
-	mutex_lock(&usbvision->lock);
-
 	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
-		mutex_unlock(&usbvision->lock);
 		return -EFAULT;
 	}
 
 	if (!(vma->vm_flags & VM_WRITE) ||
 	    size != PAGE_ALIGN(usbvision->max_frame_size)) {
-		mutex_unlock(&usbvision->lock);
 		return -EINVAL;
 	}
 
@@ -1121,7 +1106,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 	if (i == usbvision->num_frames) {
 		PDEBUG(DBG_MMAP,
 		       "mmap: user supplied mapping address is out of range");
-		mutex_unlock(&usbvision->lock);
 		return -EINVAL;
 	}
 
@@ -1134,7 +1118,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
 			PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
-			mutex_unlock(&usbvision->lock);
 			return -EAGAIN;
 		}
 		start += PAGE_SIZE;
@@ -1142,7 +1125,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 		size -= PAGE_SIZE;
 	}
 
-	mutex_unlock(&usbvision->lock);
 	return 0;
 }
 
@@ -1158,8 +1140,6 @@ static int usbvision_radio_open(struct file *file)
 
 	PDEBUG(DBG_IO, "%s:", __func__);
 
-	mutex_lock(&usbvision->lock);
-
 	if (usbvision->user) {
 		dev_err(&usbvision->rdev->dev,
 			"%s: Someone tried to open an already opened USBVision Radio!\n",
@@ -1198,7 +1178,6 @@ static int usbvision_radio_open(struct file *file)
 		}
 	}
 out:
-	mutex_unlock(&usbvision->lock);
 	return errCode;
 }
 
@@ -1210,8 +1189,6 @@ static int usbvision_radio_close(struct file *file)
 
 	PDEBUG(DBG_IO, "");
 
-	mutex_lock(&usbvision->lock);
-
 	/* Set packet size to 0 */
 	usbvision->ifaceAlt=0;
 	errCode = usb_set_interface(usbvision->dev, usbvision->iface,
@@ -1226,8 +1203,6 @@ static int usbvision_radio_close(struct file *file)
 		usbvision->initialized = 0;
 	}
 
-	mutex_unlock(&usbvision->lock);
-
 	if (usbvision->remove_pending) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		usbvision_release(usbvision);
@@ -1248,7 +1223,7 @@ static const struct v4l2_file_operations usbvision_fops = {
 	.release	= usbvision_v4l2_close,
 	.read		= usbvision_v4l2_read,
 	.mmap		= usbvision_v4l2_mmap,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 /* 	.poll          = video_poll, */
 };
 
@@ -1298,7 +1273,7 @@ static const struct v4l2_file_operations usbvision_radio_fops = {
 	.owner             = THIS_MODULE,
 	.open		= usbvision_radio_open,
 	.release	= usbvision_radio_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
@@ -1346,6 +1321,7 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
 		return NULL;
 	}
 	*vdev = *vdev_template;
+	vdev->lock = &usbvision->v4l2_lock;
 	vdev->v4l2_dev = &usbvision->v4l2_dev;
 	snprintf(vdev->name, sizeof(vdev->name), "%s", name);
 	video_set_drvdata(vdev, usbvision);
@@ -1448,7 +1424,7 @@ static struct usb_usbvision *usbvision_alloc(struct usb_device *dev,
 	if (v4l2_device_register(&intf->dev, &usbvision->v4l2_dev))
 		goto err_free;
 
-	mutex_init(&usbvision->lock);	/* available */
+	mutex_init(&usbvision->v4l2_lock);
 
 	// prepare control urb for control messages during interrupts
 	usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
@@ -1478,14 +1454,10 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 {
 	PDEBUG(DBG_PROBE, "");
 
-	mutex_lock(&usbvision->lock);
-
 	usbvision_reset_powerOffTimer(usbvision);
 
 	usbvision->initialized = 0;
 
-	mutex_unlock(&usbvision->lock);
-
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
 
@@ -1598,8 +1570,6 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	}
 	PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType);
 
-	mutex_lock(&usbvision->lock);
-
 	/* compute alternate max packet sizes */
 	uif = dev->actconfig->interface[0];
 
@@ -1609,7 +1579,6 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 					      usbvision->num_alt,GFP_KERNEL);
 	if (usbvision->alt_max_pkt_size == NULL) {
 		dev_err(&intf->dev, "usbvision: out of memory!\n");
-		mutex_unlock(&usbvision->lock);
 		return -ENOMEM;
 	}
 
@@ -1641,7 +1610,6 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	usbvision->streaming = Stream_Off;
 	usbvision_configure_video(usbvision);
 	usbvision_register_video(usbvision);
-	mutex_unlock(&usbvision->lock);
 
 	usbvision_create_sysfs(usbvision->vdev);
 
@@ -1669,7 +1637,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 		return;
 	}
 
-	mutex_lock(&usbvision->lock);
+	mutex_lock(&usbvision->v4l2_lock);
 
 	// At this time we ask to cancel outstanding URBs
 	usbvision_stop_isoc(usbvision);
@@ -1685,7 +1653,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 	usb_put_dev(usbvision->dev);
 	usbvision->dev = NULL;	// USB device is no more
 
-	mutex_unlock(&usbvision->lock);
+	mutex_unlock(&usbvision->v4l2_lock);
 
 	if (usbvision->user) {
 		printk(KERN_INFO "%s: In use, disconnect pending\n",
diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h
index cc4e96c8cd6c..2271ede78ddf 100644
--- a/drivers/media/video/usbvision/usbvision.h
+++ b/drivers/media/video/usbvision/usbvision.h
@@ -391,7 +391,7 @@ struct usb_usbvision {
 	unsigned char iface;						/* Video interface number */
 	unsigned char ifaceAlt;			/* Alt settings */
 	unsigned char Vin_Reg2_Preset;
-	struct mutex               lock;
+	struct mutex v4l2_lock;
 	struct timer_list powerOffTimer;
 	struct work_struct powerOffWork;
 	int power;							/* is the device powered on? */
-- 
cgit v1.2.3


From 5490a7cbe65d63c6ec45f1013287af1e390c95d7 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 19 Dec 2010 20:21:36 -0300
Subject: [media] usbvision: get rid of camelCase

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/usbvision/usbvision-cards.c | 1728 +++++++++++------------
 drivers/media/video/usbvision/usbvision-core.c  |  984 ++++++-------
 drivers/media/video/usbvision/usbvision-i2c.c   |   14 +-
 drivers/media/video/usbvision/usbvision-video.c |  242 ++--
 drivers/media/video/usbvision/usbvision.h       |  194 +--
 5 files changed, 1581 insertions(+), 1581 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c
index 503b13beb922..acfdb2bc7917 100644
--- a/drivers/media/video/usbvision/usbvision-cards.c
+++ b/drivers/media/video/usbvision/usbvision-cards.c
@@ -32,998 +32,998 @@
 /* Supported Devices: A table for usbvision.c*/
 struct usbvision_device_data_st  usbvision_device_data[] = {
 	[XANBOO] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 4,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Xanboo",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 4,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Xanboo",
 	},
 	[BELKIN_VIDEOBUS_II] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Belkin USB VideoBus II Adapter",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Belkin USB VideoBus II Adapter",
 	},
 	[BELKIN_VIDEOBUS] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Belkin Components USB VideoBus",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Belkin Components USB VideoBus",
 	},
 	[BELKIN_USB_VIDEOBUS_II] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Belkin USB VideoBus II",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Belkin USB VideoBus II",
 	},
 	[ECHOFX_INTERVIEW_LITE] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "echoFX InterView Lite",
+		.interface      = 0,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "echoFX InterView Lite",
 	},
 	[USBGEAR_USBG_V1] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "USBGear USBG-V1 resp. HAMA USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "USBGear USBG-V1 resp. HAMA USB",
 	},
 	[D_LINK_V100] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 4,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "D-Link V100",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 4,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "D-Link V100",
 	},
 	[X10_USB_CAMERA] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "X10 USB Camera",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "X10 USB Camera",
 	},
 	[HPG_WINTV_LIVE_PAL_BG] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Live (PAL B/G)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Live (PAL B/G)",
 	},
 	[HPG_WINTV_LIVE_PRO_NTSC_MN] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Live Pro (NTSC M/N)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Live Pro (NTSC M/N)",
 	},
 	[ZORAN_PMD_NOGATECH] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 2,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Zoran Co. PMD (Nogatech) AV-grabber Manhattan",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 2,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Zoran Co. PMD (Nogatech) AV-grabber Manhattan",
 	},
 	[NOGATECH_USB_TV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "Nogatech USB-TV (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "Nogatech USB-TV (NTSC) FM",
 	},
 	[PNY_USB_TV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "PNY USB-TV (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "PNY USB-TV (NTSC) FM",
 	},
 	[PV_PLAYTV_USB_PRO_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "PixelView PlayTv-USB PRO (PAL) FM",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "PixelView PlayTv-USB PRO (PAL) FM",
 	},
 	[ZT_721] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "ZTV ZT-721 2.4GHz USB A/V Receiver",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "ZTV ZT-721 2.4GHz USB A/V Receiver",
 	},
 	[HPG_WINTV_NTSC_MN] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "Hauppauge WinTV USB (NTSC M/N)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "Hauppauge WinTV USB (NTSC M/N)",
 	},
 	[HPG_WINTV_PAL_BG] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL B/G)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL B/G)",
 	},
 	[HPG_WINTV_PAL_I] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL I)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL I)",
 	},
 	[HPG_WINTV_PAL_SECAM_L] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0x80,
-		.Y_Offset      = 0x16,
-		.ModelString   = "Hauppauge WinTV USB (PAL/SECAM L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0x80,
+		.y_offset       = 0x16,
+		.model_string   = "Hauppauge WinTV USB (PAL/SECAM L)",
 	},
 	[HPG_WINTV_PAL_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL D/K)",
 	},
 	[HPG_WINTV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (NTSC FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (NTSC FM)",
 	},
 	[HPG_WINTV_PAL_BG_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL B/G FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL B/G FM)",
 	},
 	[HPG_WINTV_PAL_I_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL I FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL I FM)",
 	},
 	[HPG_WINTV_PAL_D_K_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL D/K FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL D/K FM)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_V2] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N) V2",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N) V2",
 	},
 	[HPG_WINTV_PRO_PAL] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_V3] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N) V3",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N) V3",
 	},
 	[HPG_WINTV_PRO_PAL_BG] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G)",
 	},
 	[HPG_WINTV_PRO_PAL_I] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM_L] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM L)",
 	},
 	[HPG_WINTV_PRO_PAL_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL D/K)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2",
 	},
 	[HPG_WINTV_PRO_PAL_BG_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_ALPS_TSBE1_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G) V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_ALPS_TSBE1_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G) V2",
 	},
 	[HPG_WINTV_PRO_PAL_BG_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_ALPS_TSBE1_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G,D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_ALPS_TSBE1_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G,D/K)",
 	},
 	[HPG_WINTV_PRO_PAL_I_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_LG_PAL_NEW_TAPC,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I,D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I,D/K)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N FM)",
 	},
 	[HPG_WINTV_PRO_PAL_BG_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G FM)",
 	},
 	[HPG_WINTV_PRO_PAL_I_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I FM)",
 	},
 	[HPG_WINTV_PRO_PAL_D_K_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL D/K FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL D/K FM)",
 	},
 	[HPG_WINTV_PRO_TEMIC_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)",
 	},
 	[HPG_WINTV_PRO_TEMIC_PAL_BG_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (Temic PAL B/G FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (Temic PAL B/G FM)",
 	},
 	[HPG_WINTV_PRO_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_FM_V2] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N FM) V2",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N FM) V2",
 	},
 	[CAMTEL_TVB330] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 5,
-		.Y_Offset      = 5,
-		.ModelString   = "Camtel Technology USB TV Genie Pro FM Model TVB330",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 5,
+		.y_offset       = 5,
+		.model_string   = "Camtel Technology USB TV Genie Pro FM Model TVB330",
 	},
 	[DIGITAL_VIDEO_CREATOR_I] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Digital Video Creator I",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Digital Video Creator I",
 	},
 	[GLOBAL_VILLAGE_GV_007_NTSC] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 82,
-		.Y_Offset      = 20,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Global Village GV-007 (NTSC)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 82,
+		.y_offset       = 20,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Global Village GV-007 (NTSC)",
 	},
 	[DAZZLE_DVC_50_REV_1_NTSC] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)",
 	},
 	[DAZZLE_DVC_80_REV_1_PAL] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-80 Rev 1 (PAL)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-80 Rev 1 (PAL)",
 	},
 	[DAZZLE_DVC_90_REV_1_SECAM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)",
 	},
 	[ESKAPE_LABS_MYTV2GO] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Eskape Labs MyTV2Go",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Eskape Labs MyTV2Go",
 	},
 	[PINNA_PCTV_USB_PAL] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 0,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4066FY5_PAL_I,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 0,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4066FY5_PAL_I,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL)",
 	},
 	[PINNA_PCTV_USB_SECAM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (SECAM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (SECAM)",
 	},
 	[PINNA_PCTV_USB_PAL_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 128,
-		.Y_Offset      = 23,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 128,
+		.y_offset       = 23,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM",
 	},
 	[MIRO_PCTV_USB] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Miro PCTV USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Miro PCTV USB",
 	},
 	[PINNA_PCTV_USB_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM",
 	},
 	[PINNA_PCTV_USB_NTSC_FM_V3] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM V3",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM V3",
 	},
 	[PINNA_PCTV_USB_PAL_FM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM V2",
 	},
 	[PINNA_PCTV_USB_NTSC_FM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4039FR5_NTSC,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM V2",
 	},
 	[PINNA_PCTV_USB_PAL_FM_V3] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM V3",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM V3",
 	},
 	[PINNA_LINX_VD_IN_CAB_NTSC] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio Linx Video input cable (NTSC)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio Linx Video input cable (NTSC)",
 	},
 	[PINNA_LINX_VD_IN_CAB_PAL] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio Linx Video input cable (PAL)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio Linx Video input cable (PAL)",
 	},
 	[PINNA_PCTV_BUNGEE_PAL_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle PCTV Bungee USB (PAL) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle PCTV Bungee USB (PAL) FM",
 	},
 	[HPG_WINTV] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTv-USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTv-USB",
 	},
 };
 const int usbvision_device_data_size=ARRAY_SIZE(usbvision_device_data);
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index de58aa7d9e1d..372e21b35ed3 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -53,23 +53,23 @@ static unsigned int force_testpattern;
 module_param(force_testpattern,int,0644);
 MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]");
 
-static int adjustCompression = 1;	/* Set the compression to be adaptive */
-module_param(adjustCompression, int, 0444);
-MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device.  Default: 1 (On)");
+static int adjust_compression = 1;	/* Set the compression to be adaptive */
+module_param(adjust_compression, int, 0444);
+MODULE_PARM_DESC(adjust_compression, " Set the ADPCM compression for the device.  Default: 1 (On)");
 
 /* To help people with Black and White output with using s-video input.
  * Some cables and input device are wired differently. */
-static int SwitchSVideoInput;
-module_param(SwitchSVideoInput, int, 0444);
-MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input.  Some cables and input device are wired differently. Default: 0 (Off)");
+static int switch_svideo_input;
+module_param(switch_svideo_input, int, 0444);
+MODULE_PARM_DESC(switch_svideo_input, " Set the S-Video input.  Some cables and input device are wired differently. Default: 0 (Off)");
 
-static unsigned int adjust_X_Offset = -1;
-module_param(adjust_X_Offset, int, 0644);
-MODULE_PARM_DESC(adjust_X_Offset, "adjust X offset display [core]");
+static unsigned int adjust_x_offset = -1;
+module_param(adjust_x_offset, int, 0644);
+MODULE_PARM_DESC(adjust_x_offset, "adjust X offset display [core]");
 
-static unsigned int adjust_Y_Offset = -1;
-module_param(adjust_Y_Offset, int, 0644);
-MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]");
+static unsigned int adjust_y_offset = -1;
+module_param(adjust_y_offset, int, 0644);
+MODULE_PARM_DESC(adjust_y_offset, "adjust Y offset display [core]");
 
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
@@ -327,7 +327,7 @@ static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data,
 static int scratch_get_header(struct usb_usbvision *usbvision,
 			      struct usbvision_frame_header *header)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr);
 
@@ -340,15 +340,15 @@ static int scratch_get_header(struct usb_usbvision *usbvision,
 		scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH);
 		if ((header->magic_1 == USBVISION_MAGIC_1)
 			 && (header->magic_2 == USBVISION_MAGIC_2)
-			 && (header->headerLength == USBVISION_HEADER_LENGTH)) {
-			errCode = USBVISION_HEADER_LENGTH;
-			header->frameWidth  = header->frameWidthLo  + (header->frameWidthHi << 8);
-			header->frameHeight = header->frameHeightLo + (header->frameHeightHi << 8);
+			 && (header->header_length == USBVISION_HEADER_LENGTH)) {
+			err_code = USBVISION_HEADER_LENGTH;
+			header->frame_width  = header->frame_width_lo  + (header->frame_width_hi << 8);
+			header->frame_height = header->frame_height_lo + (header->frame_height_hi << 8);
 			break;
 		}
 	}
 
-	return errCode;
+	return err_code;
 }
 
 
@@ -371,7 +371,7 @@ static void scratch_reset(struct usb_usbvision *usbvision)
 	usbvision->scratch_write_ptr = 0;
 	usbvision->scratch_headermarker_read_ptr = 0;
 	usbvision->scratch_headermarker_write_ptr = 0;
-	usbvision->isocstate = IsocState_NoFrame;
+	usbvision->isocstate = isoc_state_no_frame;
 }
 
 int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
@@ -420,13 +420,13 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 		printk(KERN_ERR "%s: usbvision == NULL\n", proc);
 		return;
 	}
-	if (usbvision->curFrame == NULL) {
-		printk(KERN_ERR "%s: usbvision->curFrame is NULL.\n", proc);
+	if (usbvision->cur_frame == NULL) {
+		printk(KERN_ERR "%s: usbvision->cur_frame is NULL.\n", proc);
 		return;
 	}
 
 	/* Grab the current frame */
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
 	/* Optionally start at the beginning */
 	if (fullframe) {
@@ -473,7 +473,7 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 		}
 	}
 
-	frame->grabstate = FrameState_Done;
+	frame->grabstate = frame_state_done;
 	frame->scanlength += scan_length;
 	++num_pass;
 
@@ -487,8 +487,8 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
 {
 	int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2;
-	usbvision->IntraFrameBuffer = vmalloc_32(IFB_size);
-	if (usbvision->IntraFrameBuffer == NULL) {
+	usbvision->intra_frame_buffer = vmalloc_32(IFB_size);
+	if (usbvision->intra_frame_buffer == NULL) {
 		dev_err(&usbvision->dev->dev,
 			"%s: unable to allocate %d for compr. frame buffer\n",
 				__func__, IFB_size);
@@ -504,8 +504,8 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
  */
 void usbvision_decompress_free(struct usb_usbvision *usbvision)
 {
-	vfree(usbvision->IntraFrameBuffer);
-	usbvision->IntraFrameBuffer = NULL;
+	vfree(usbvision->intra_frame_buffer);
+	usbvision->intra_frame_buffer = NULL;
 
 }
 
@@ -517,77 +517,77 @@ void usbvision_decompress_free(struct usb_usbvision *usbvision)
  *
  * Locate one of supported header markers in the scratch buffer.
  */
-static enum ParseState usbvision_find_header(struct usb_usbvision *usbvision)
+static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 {
 	struct usbvision_frame *frame;
-	int foundHeader = 0;
+	int found_header = 0;
 
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
-	while (scratch_get_header(usbvision, &frame->isocHeader) == USBVISION_HEADER_LENGTH) {
+	while (scratch_get_header(usbvision, &frame->isoc_header) == USBVISION_HEADER_LENGTH) {
 		// found header in scratch
 		PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u",
-				frame->isocHeader.magic_2,
-				frame->isocHeader.magic_1,
-				frame->isocHeader.headerLength,
-				frame->isocHeader.frameNum,
-				frame->isocHeader.framePhase,
-				frame->isocHeader.frameLatency,
-				frame->isocHeader.dataFormat,
-				frame->isocHeader.formatParam,
-				frame->isocHeader.frameWidth,
-				frame->isocHeader.frameHeight);
-
-		if (usbvision->requestIntra) {
-			if (frame->isocHeader.formatParam & 0x80) {
-				foundHeader = 1;
-				usbvision->lastIsocFrameNum = -1; // do not check for lost frames this time
+				frame->isoc_header.magic_2,
+				frame->isoc_header.magic_1,
+				frame->isoc_header.header_length,
+				frame->isoc_header.frame_num,
+				frame->isoc_header.frame_phase,
+				frame->isoc_header.frame_latency,
+				frame->isoc_header.data_format,
+				frame->isoc_header.format_param,
+				frame->isoc_header.frame_width,
+				frame->isoc_header.frame_height);
+
+		if (usbvision->request_intra) {
+			if (frame->isoc_header.format_param & 0x80) {
+				found_header = 1;
+				usbvision->last_isoc_frame_num = -1; // do not check for lost frames this time
 				usbvision_unrequest_intra(usbvision);
 				break;
 			}
 		}
 		else {
-			foundHeader = 1;
+			found_header = 1;
 			break;
 		}
 	}
 
-	if (foundHeader) {
-		frame->frmwidth = frame->isocHeader.frameWidth * usbvision->stretch_width;
-		frame->frmheight = frame->isocHeader.frameHeight * usbvision->stretch_height;
+	if (found_header) {
+		frame->frmwidth = frame->isoc_header.frame_width * usbvision->stretch_width;
+		frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height;
 		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3;
 	}
 	else { // no header found
 		PDEBUG(DBG_HEADER, "skipping scratch data, no header");
 		scratch_reset(usbvision);
-		return ParseState_EndParse;
+		return parse_state_end_parse;
 	}
 
 	// found header
-	if (frame->isocHeader.dataFormat==ISOC_MODE_COMPRESS) {
-		//check isocHeader.frameNum for lost frames
-		if (usbvision->lastIsocFrameNum >= 0) {
-			if (((usbvision->lastIsocFrameNum + 1) % 32) != frame->isocHeader.frameNum) {
+	if (frame->isoc_header.data_format==ISOC_MODE_COMPRESS) {
+		//check isoc_header.frame_num for lost frames
+		if (usbvision->last_isoc_frame_num >= 0) {
+			if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) {
 				// unexpected frame drop: need to request new intra frame
-				PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isocHeader.frameNum);
+				PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isoc_header.frame_num);
 				usbvision_request_intra(usbvision);
-				return ParseState_NextFrame;
+				return parse_state_next_frame;
 			}
 		}
-		usbvision->lastIsocFrameNum = frame->isocHeader.frameNum;
+		usbvision->last_isoc_frame_num = frame->isoc_header.frame_num;
 	}
 	usbvision->header_count++;
-	frame->scanstate = ScanState_Lines;
+	frame->scanstate = scan_state_lines;
 	frame->curline = 0;
 
 	if (force_testpattern) {
 		usbvision_testpattern(usbvision, 1, 1);
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
-	return ParseState_Continue;
+	return parse_state_continue;
 }
 
-static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 	volatile struct usbvision_frame *frame;
@@ -599,18 +599,18 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision
 	int clipmask_index, bytes_per_pixel;
 	int stretch_bytes, clipmask_add;
 
-	frame  = usbvision->curFrame;
+	frame  = usbvision->cur_frame;
 	f = frame->data + (frame->v4l2_linesize * frame->curline);
 
 	/* Make sure there's enough data for the entire line */
-	len = (frame->isocHeader.frameWidth * 2)+5;
+	len = (frame->isoc_header.frame_width * 2)+5;
 	if (scratch_len(usbvision) < len) {
 		PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len);
-		return ParseState_Out;
+		return parse_state_out;
 	}
 
 	if ((frame->curline + 1) >= frame->frmheight) {
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
 
 	bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
@@ -699,99 +699,99 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision
 	*pcopylen += frame->v4l2_linesize * usbvision->stretch_height;
 
 	if (frame->curline >= frame->frmheight) {
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
 	else {
-		return ParseState_Continue;
+		return parse_state_continue;
 	}
 }
 
 /* The decompression routine  */
-static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *Compressed,
-								unsigned char *Decompressed, int *StartPos,
-								int *BlockTypeStartPos, int Len)
+static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *compressed,
+								unsigned char *decompressed, int *start_pos,
+								int *block_typestart_pos, int len)
 {
-	int RestPixel, Idx, MaxPos, Pos, ExtraPos, BlockLen, BlockTypePos, BlockTypeLen;
-	unsigned char BlockByte, BlockCode, BlockType, BlockTypeByte, Integrator;
-
-	Integrator = 0;
-	Pos = *StartPos;
-	BlockTypePos = *BlockTypeStartPos;
-	MaxPos = 396; //Pos + Len;
-	ExtraPos = Pos;
-	BlockLen = 0;
-	BlockByte = 0;
-	BlockCode = 0;
-	BlockType = 0;
-	BlockTypeByte = 0;
-	BlockTypeLen = 0;
-	RestPixel = Len;
-
-	for (Idx = 0; Idx < Len; Idx++) {
-
-		if (BlockLen == 0) {
-			if (BlockTypeLen==0) {
-				BlockTypeByte = Compressed[BlockTypePos];
-				BlockTypePos++;
-				BlockTypeLen = 4;
+	int rest_pixel, idx, max_pos, pos, extra_pos, block_len, block_type_pos, block_type_len;
+	unsigned char block_byte, block_code, block_type, block_type_byte, integrator;
+
+	integrator = 0;
+	pos = *start_pos;
+	block_type_pos = *block_typestart_pos;
+	max_pos = 396; //pos + len;
+	extra_pos = pos;
+	block_len = 0;
+	block_byte = 0;
+	block_code = 0;
+	block_type = 0;
+	block_type_byte = 0;
+	block_type_len = 0;
+	rest_pixel = len;
+
+	for (idx = 0; idx < len; idx++) {
+
+		if (block_len == 0) {
+			if (block_type_len==0) {
+				block_type_byte = compressed[block_type_pos];
+				block_type_pos++;
+				block_type_len = 4;
 			}
-			BlockType = (BlockTypeByte & 0xC0) >> 6;
+			block_type = (block_type_byte & 0xC0) >> 6;
 
 			//statistic:
-			usbvision->ComprBlockTypes[BlockType]++;
-
-			Pos = ExtraPos;
-			if (BlockType == 0) {
-				if(RestPixel >= 24) {
-					Idx += 23;
-					RestPixel -= 24;
-					Integrator = Decompressed[Idx];
+			usbvision->compr_block_types[block_type]++;
+
+			pos = extra_pos;
+			if (block_type == 0) {
+				if(rest_pixel >= 24) {
+					idx += 23;
+					rest_pixel -= 24;
+					integrator = decompressed[idx];
 				} else {
-					Idx += RestPixel - 1;
-					RestPixel = 0;
+					idx += rest_pixel - 1;
+					rest_pixel = 0;
 				}
 			} else {
-				BlockCode = Compressed[Pos];
-				Pos++;
-				if (RestPixel >= 24) {
-					BlockLen  = 24;
+				block_code = compressed[pos];
+				pos++;
+				if (rest_pixel >= 24) {
+					block_len  = 24;
 				} else {
-					BlockLen = RestPixel;
+					block_len = rest_pixel;
 				}
-				RestPixel -= BlockLen;
-				ExtraPos = Pos + (BlockLen / 4);
+				rest_pixel -= block_len;
+				extra_pos = pos + (block_len / 4);
 			}
-			BlockTypeByte <<= 2;
-			BlockTypeLen -= 1;
+			block_type_byte <<= 2;
+			block_type_len -= 1;
 		}
-		if (BlockLen > 0) {
-			if ((BlockLen%4) == 0) {
-				BlockByte = Compressed[Pos];
-				Pos++;
+		if (block_len > 0) {
+			if ((block_len%4) == 0) {
+				block_byte = compressed[pos];
+				pos++;
 			}
-			if (BlockType == 1) { //inter Block
-				Integrator = Decompressed[Idx];
+			if (block_type == 1) { //inter Block
+				integrator = decompressed[idx];
 			}
-			switch (BlockByte & 0xC0) {
+			switch (block_byte & 0xC0) {
 				case 0x03<<6:
-					Integrator += Compressed[ExtraPos];
-					ExtraPos++;
+					integrator += compressed[extra_pos];
+					extra_pos++;
 					break;
 				case 0x02<<6:
-					Integrator += BlockCode;
+					integrator += block_code;
 					break;
 				case 0x00:
-					Integrator -= BlockCode;
+					integrator -= block_code;
 					break;
 			}
-			Decompressed[Idx] = Integrator;
-			BlockByte <<= 2;
-			BlockLen -= 1;
+			decompressed[idx] = integrator;
+			block_byte <<= 2;
+			block_len -= 1;
 		}
 	}
-	*StartPos = ExtraPos;
-	*BlockTypeStartPos = BlockTypePos;
-	return Idx;
+	*start_pos = extra_pos;
+	*block_typestart_pos = block_type_pos;
+	return idx;
 }
 
 
@@ -803,7 +803,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *C
  * number of bytes (RGB) to the *pcopylen.
  *
  */
-static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 #define USBVISION_STRIP_MAGIC		0x5A
@@ -812,16 +812,16 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 
 	struct usbvision_frame *frame;
 	unsigned char *f,*u = NULL ,*v = NULL;
-	unsigned char StripData[USBVISION_STRIP_LEN_MAX];
-	unsigned char StripHeader[USBVISION_STRIP_HEADER_LEN];
-	int Idx, IdxEnd, StripLen, StripPtr, StartBlockPos, BlockPos, BlockTypePos;
+	unsigned char strip_data[USBVISION_STRIP_LEN_MAX];
+	unsigned char strip_header[USBVISION_STRIP_HEADER_LEN];
+	int idx, idx_end, strip_len, strip_ptr, Startblock_pos, block_pos, block_type_pos;
 	int clipmask_index, bytes_per_pixel, rc;
-	int imageSize;
+	int image_size;
 	unsigned char rv, gv, bv;
 	static unsigned char *Y, *U, *V;
 
-	frame  = usbvision->curFrame;
-	imageSize = frame->frmwidth * frame->frmheight;
+	frame  = usbvision->cur_frame;
+	image_size = frame->frmwidth * frame->frmheight;
 	if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
 	     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) {       // this is a planar format
 		//... v4l2_linesize not used here.
@@ -833,14 +833,14 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 		// get base of u and b planes add halfoffset
 
 		u = frame->data
-			+ imageSize
+			+ image_size
 			+ (frame->frmwidth >>1) * frame->curline ;
-		v = u + (imageSize >>1 );
+		v = u + (image_size >>1 );
 
 	} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
 
-		v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
-		u = v + (imageSize >>2) ;
+		v = frame->data + image_size + ((frame->curline* (frame->width))>>2) ;
+		u = v + (image_size >>2) ;
 	}
 
 	if (frame->curline == 0) {
@@ -848,112 +848,112 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 	}
 
 	if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) {
-		return ParseState_Out;
+		return parse_state_out;
 	}
 
 	//get strip header without changing the scratch_read_ptr
-	scratch_set_extra_ptr(usbvision, &StripPtr, 0);
-	scratch_get_extra(usbvision, &StripHeader[0], &StripPtr,
+	scratch_set_extra_ptr(usbvision, &strip_ptr, 0);
+	scratch_get_extra(usbvision, &strip_header[0], &strip_ptr,
 				USBVISION_STRIP_HEADER_LEN);
 
-	if (StripHeader[0] != USBVISION_STRIP_MAGIC) {
+	if (strip_header[0] != USBVISION_STRIP_MAGIC) {
 		// wrong strip magic
-		usbvision->stripMagicErrors++;
-		return ParseState_NextFrame;
+		usbvision->strip_magic_errors++;
+		return parse_state_next_frame;
 	}
 
-	if (frame->curline != (int)StripHeader[2]) {
+	if (frame->curline != (int)strip_header[2]) {
 		//line number missmatch error
-		usbvision->stripLineNumberErrors++;
+		usbvision->strip_line_number_errors++;
 	}
 
-	StripLen = 2 * (unsigned int)StripHeader[1];
-	if (StripLen > USBVISION_STRIP_LEN_MAX) {
+	strip_len = 2 * (unsigned int)strip_header[1];
+	if (strip_len > USBVISION_STRIP_LEN_MAX) {
 		// strip overrun
 		// I think this never happens
 		usbvision_request_intra(usbvision);
 	}
 
-	if (scratch_len(usbvision) < StripLen) {
+	if (scratch_len(usbvision) < strip_len) {
 		//there is not enough data for the strip
-		return ParseState_Out;
+		return parse_state_out;
 	}
 
-	if (usbvision->IntraFrameBuffer) {
-		Y = usbvision->IntraFrameBuffer + frame->frmwidth * frame->curline;
-		U = usbvision->IntraFrameBuffer + imageSize + (frame->frmwidth / 2) * (frame->curline / 2);
-		V = usbvision->IntraFrameBuffer + imageSize / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
+	if (usbvision->intra_frame_buffer) {
+		Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline;
+		U = usbvision->intra_frame_buffer + image_size + (frame->frmwidth / 2) * (frame->curline / 2);
+		V = usbvision->intra_frame_buffer + image_size / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
 	}
 	else {
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
 
 	bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
 	clipmask_index = frame->curline * MAX_FRAME_WIDTH;
 
-	scratch_get(usbvision, StripData, StripLen);
+	scratch_get(usbvision, strip_data, strip_len);
 
-	IdxEnd = frame->frmwidth;
-	BlockTypePos = USBVISION_STRIP_HEADER_LEN;
-	StartBlockPos = BlockTypePos + (IdxEnd - 1) / 96 + (IdxEnd / 2 - 1) / 96 + 2;
-	BlockPos = StartBlockPos;
+	idx_end = frame->frmwidth;
+	block_type_pos = USBVISION_STRIP_HEADER_LEN;
+	Startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2;
+	block_pos = Startblock_pos;
 
-	usbvision->BlockPos = BlockPos;
+	usbvision->block_pos = block_pos;
 
-	if ((rc = usbvision_decompress(usbvision, StripData, Y, &BlockPos, &BlockTypePos, IdxEnd)) != IdxEnd) {
-		//return ParseState_Continue;
+	if ((rc = usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end)) != idx_end) {
+		//return parse_state_continue;
 	}
-	if (StripLen > usbvision->maxStripLen) {
-		usbvision->maxStripLen = StripLen;
+	if (strip_len > usbvision->max_strip_len) {
+		usbvision->max_strip_len = strip_len;
 	}
 
 	if (frame->curline%2) {
-		if ((rc = usbvision_decompress(usbvision, StripData, V, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
-		//return ParseState_Continue;
+		if ((rc = usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
+		//return parse_state_continue;
 		}
 	}
 	else {
-		if ((rc = usbvision_decompress(usbvision, StripData, U, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
-			//return ParseState_Continue;
+		if ((rc = usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
+			//return parse_state_continue;
 		}
 	}
 
-	if (BlockPos > usbvision->comprBlockPos) {
-		usbvision->comprBlockPos = BlockPos;
+	if (block_pos > usbvision->comprblock_pos) {
+		usbvision->comprblock_pos = block_pos;
 	}
-	if (BlockPos > StripLen) {
-		usbvision->stripLenErrors++;
+	if (block_pos > strip_len) {
+		usbvision->strip_len_errors++;
 	}
 
-	for (Idx = 0; Idx < IdxEnd; Idx++) {
+	for (idx = 0; idx < idx_end; idx++) {
 		if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = Y[Idx];
-			*f++ = Idx & 0x01 ? U[Idx/2] : V[Idx/2];
+			*f++ = Y[idx];
+			*f++ = idx & 0x01 ? U[idx/2] : V[idx/2];
 		}
 		else if(frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
-			*f++ = Y[Idx];
-			if ( Idx & 0x01)
-				*u++ = U[Idx>>1] ;
+			*f++ = Y[idx];
+			if ( idx & 0x01)
+				*u++ = U[idx>>1] ;
 			else
-				*v++ = V[Idx>>1];
+				*v++ = V[idx>>1];
 		}
 		else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
-			*f++ = Y [Idx];
-			if ( !((  Idx & 0x01  ) | (  frame->curline & 0x01  )) ){
+			*f++ = Y [idx];
+			if ( !((  idx & 0x01  ) | (  frame->curline & 0x01  )) ){
 
 /* 				 only need do this for 1 in 4 pixels */
 /* 				 intraframe buffer is YUV420 format */
 
-				*u++ = U[Idx >>1];
-				*v++ = V[Idx >>1];
+				*u++ = U[idx >>1];
+				*v++ = V[idx >>1];
 			}
 
 		}
 		else {
-			YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv);
+			YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx/2], V[idx/2], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
 				case V4L2_PIX_FMT_GREY:
-					*f++ = Y[Idx];
+					*f++ = Y[idx];
 					break;
 				case V4L2_PIX_FMT_RGB555:
 					*f++ = (0x1F & rv) |
@@ -991,10 +991,10 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 	frame->curline += 1;
 
 	if (frame->curline >= frame->frmheight) {
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
 	else {
-		return ParseState_Continue;
+		return parse_state_continue;
 	}
 
 }
@@ -1008,7 +1008,7 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
  * number of bytes (RGB) to the *pcopylen.
  *
  */
-static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 	struct usbvision_frame *frame;
@@ -1028,7 +1028,7 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	int clipmask_even_index, clipmask_odd_index, bytes_per_pixel;
 	int clipmask_add, stretch_bytes;
 
-	frame  = usbvision->curFrame;
+	frame  = usbvision->cur_frame;
 	f_even = frame->data + (frame->v4l2_linesize * frame->curline);
 	f_odd  = f_even + frame->v4l2_linesize * usbvision->stretch_height;
 
@@ -1040,15 +1040,15 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	clipmask_even_index = frame->curline * MAX_FRAME_WIDTH;
 	clipmask_odd_index  = clipmask_even_index + MAX_FRAME_WIDTH;
 	clipmask_add = usbvision->stretch_width;
-	pixel_per_line = frame->isocHeader.frameWidth;
+	pixel_per_line = frame->isoc_header.frame_width;
 
 	if (scratch_len(usbvision) < (int)pixel_per_line * 3) {
 		//printk(KERN_DEBUG "out of data, need %d\n", len);
-		return ParseState_Out;
+		return parse_state_out;
 	}
 
 	if ((frame->curline + 1) >= frame->frmheight) {
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
 
 	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	//are some blocks splitted into different lines?
@@ -1272,9 +1272,9 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	*pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height;
 
 	if (frame->curline >= frame->frmheight)
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	else
-		return ParseState_Continue;
+		return parse_state_continue;
 }
 
 /*
@@ -1288,53 +1288,53 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 static void usbvision_parse_data(struct usb_usbvision *usbvision)
 {
 	struct usbvision_frame *frame;
-	enum ParseState newstate;
+	enum parse_state newstate;
 	long copylen = 0;
 	unsigned long lock_flags;
 
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
 	PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision));
 
 	while (1) {
 
-		newstate = ParseState_Out;
+		newstate = parse_state_out;
 		if (scratch_len(usbvision)) {
-			if (frame->scanstate == ScanState_Scanning) {
+			if (frame->scanstate == scan_state_scanning) {
 				newstate = usbvision_find_header(usbvision);
 			}
-			else if (frame->scanstate == ScanState_Lines) {
-				if (usbvision->isocMode == ISOC_MODE_YUV420) {
+			else if (frame->scanstate == scan_state_lines) {
+				if (usbvision->isoc_mode == ISOC_MODE_YUV420) {
 					newstate = usbvision_parse_lines_420(usbvision, &copylen);
 				}
-				else if (usbvision->isocMode == ISOC_MODE_YUV422) {
+				else if (usbvision->isoc_mode == ISOC_MODE_YUV422) {
 					newstate = usbvision_parse_lines_422(usbvision, &copylen);
 				}
-				else if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+				else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
 					newstate = usbvision_parse_compress(usbvision, &copylen);
 				}
 
 			}
 		}
-		if (newstate == ParseState_Continue) {
+		if (newstate == parse_state_continue) {
 			continue;
 		}
-		else if ((newstate == ParseState_NextFrame) || (newstate == ParseState_Out)) {
+		else if ((newstate == parse_state_next_frame) || (newstate == parse_state_out)) {
 			break;
 		}
 		else {
-			return;	/* ParseState_EndParse */
+			return;	/* parse_state_end_parse */
 		}
 	}
 
-	if (newstate == ParseState_NextFrame) {
-		frame->grabstate = FrameState_Done;
+	if (newstate == parse_state_next_frame) {
+		frame->grabstate = frame_state_done;
 		do_gettimeofday(&(frame->timestamp));
 		frame->sequence = usbvision->frame_num;
 
 		spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
 		list_move_tail(&(frame->frame), &usbvision->outqueue);
-		usbvision->curFrame = NULL;
+		usbvision->cur_frame = NULL;
 		spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
 		usbvision->frame_num++;
@@ -1346,7 +1346,7 @@ static void usbvision_parse_data(struct usb_usbvision *usbvision)
 		}
 	}
 	else
-		frame->grabstate = FrameState_Grabbing;
+		frame->grabstate = frame_state_grabbing;
 
 
 	/* Update the frame's uncompressed length. */
@@ -1372,32 +1372,32 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		/* Detect and ignore errored packets */
 		if (packet_stat) {	// packet_stat != 0 ?????????????
 			PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat);
-			usbvision->isocErrCount++;
+			usbvision->isoc_err_count++;
 			continue;
 		}
 
 		/* Detect and ignore empty packets */
 		if (packet_len < 0) {
 			PDEBUG(DBG_ISOC, "error packet [%d]", i);
-			usbvision->isocSkipCount++;
+			usbvision->isoc_skip_count++;
 			continue;
 		}
 		else if (packet_len == 0) {	/* Frame end ????? */
 			PDEBUG(DBG_ISOC, "null packet [%d]", i);
-			usbvision->isocstate=IsocState_NoFrame;
-			usbvision->isocSkipCount++;
+			usbvision->isocstate=isoc_state_no_frame;
+			usbvision->isoc_skip_count++;
 			continue;
 		}
-		else if (packet_len > usbvision->isocPacketSize) {
-			PDEBUG(DBG_ISOC, "packet[%d] > isocPacketSize", i);
-			usbvision->isocSkipCount++;
+		else if (packet_len > usbvision->isoc_packet_size) {
+			PDEBUG(DBG_ISOC, "packet[%d] > isoc_packet_size", i);
+			usbvision->isoc_skip_count++;
 			continue;
 		}
 
 		PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len);
 
-		if (usbvision->isocstate==IsocState_NoFrame) { //new frame begins
-			usbvision->isocstate=IsocState_InFrame;
+		if (usbvision->isocstate==isoc_state_no_frame) { //new frame begins
+			usbvision->isocstate=isoc_state_in_frame;
 			scratch_mark_header(usbvision);
 			usbvision_measure_bandwidth(usbvision);
 			PDEBUG(DBG_ISOC, "packet with header");
@@ -1422,8 +1422,8 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		/* Now we know that there is enough room in scratch buffer */
 		scratch_put(usbvision, packet_data, packet_len);
 		totlen += packet_len;
-		usbvision->isocDataCount += packet_len;
-		usbvision->isocPacketCount++;
+		usbvision->isoc_data_count += packet_len;
+		usbvision->isoc_packet_count++;
 	}
 #if ENABLE_HEXDUMP
 	if (totlen > 0) {
@@ -1438,13 +1438,13 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
  return totlen;
 }
 
-static void usbvision_isocIrq(struct urb *urb)
+static void usbvision_isoc_irq(struct urb *urb)
 {
-	int errCode = 0;
+	int err_code = 0;
 	int len;
 	struct usb_usbvision *usbvision = urb->context;
 	int i;
-	unsigned long startTime = jiffies;
+	unsigned long start_time = jiffies;
 	struct usbvision_frame **f;
 
 	/* We don't want to do anything if we are about to be removed! */
@@ -1456,14 +1456,14 @@ static void usbvision_isocIrq(struct urb *urb)
 		return;
 	}
 
-	f = &usbvision->curFrame;
+	f = &usbvision->cur_frame;
 
 	/* Manage streaming interruption */
-	if (usbvision->streaming == Stream_Interrupt) {
-		usbvision->streaming = Stream_Idle;
+	if (usbvision->streaming == stream_interrupt) {
+		usbvision->streaming = stream_idle;
 		if ((*f)) {
-			(*f)->grabstate = FrameState_Ready;
-			(*f)->scanstate = ScanState_Scanning;
+			(*f)->grabstate = frame_state_ready;
+			(*f)->scanstate = scan_state_scanning;
 		}
 		PDEBUG(DBG_IRQ, "stream interrupted");
 		wake_up_interruptible(&usbvision->wait_stream);
@@ -1472,10 +1472,10 @@ static void usbvision_isocIrq(struct urb *urb)
 	/* Copy the data received into our scratch buffer */
 	len = usbvision_compress_isochronous(usbvision, urb);
 
-	usbvision->isocUrbCount++;
+	usbvision->isoc_urb_count++;
 	usbvision->urb_length = len;
 
-	if (usbvision->streaming == Stream_On) {
+	if (usbvision->streaming == stream_on) {
 
 		/* If we collected enough data let's parse! */
 		if ((scratch_len(usbvision) > USBVISION_HEADER_LENGTH) &&
@@ -1500,7 +1500,7 @@ static void usbvision_isocIrq(struct urb *urb)
 		scratch_reset(usbvision);
 	}
 
-	usbvision->timeInIrq += jiffies - startTime;
+	usbvision->time_in_irq += jiffies - start_time;
 
 	for (i = 0; i < USBVISION_URB_FRAMES; i++) {
 		urb->iso_frame_desc[i].status = 0;
@@ -1509,12 +1509,12 @@ static void usbvision_isocIrq(struct urb *urb)
 
 	urb->status = 0;
 	urb->dev = usbvision->dev;
-	errCode = usb_submit_urb (urb, GFP_ATOMIC);
+	err_code = usb_submit_urb (urb, GFP_ATOMIC);
 
-	if(errCode) {
+	if(err_code) {
 		dev_err(&usbvision->dev->dev,
 			"%s: usb_submit_urb failed: error %d\n",
-				__func__, errCode);
+				__func__, err_code);
 	}
 
 	return;
@@ -1533,21 +1533,21 @@ static void usbvision_isocIrq(struct urb *urb)
 
 int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -1;
 
-	errCode = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1),
+	err_code = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1),
 				USBVISION_OP_CODE,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
 				0, (__u16) reg, buffer, 1, HZ);
 
-	if (errCode < 0) {
+	if (err_code < 0) {
 		dev_err(&usbvision->dev->dev,
-			"%s: failed: error %d\n", __func__, errCode);
-		return errCode;
+			"%s: failed: error %d\n", __func__, err_code);
+		return err_code;
 	}
 	return buffer[0];
 }
@@ -1563,32 +1563,32 @@ int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg)
 int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
 			    unsigned char value)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
-	errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+	err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 				USBVISION_OP_CODE,
 				USB_DIR_OUT | USB_TYPE_VENDOR |
 				USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ);
 
-	if (errCode < 0) {
+	if (err_code < 0) {
 		dev_err(&usbvision->dev->dev,
-			"%s: failed: error %d\n", __func__, errCode);
+			"%s: failed: error %d\n", __func__, err_code);
 	}
-	return errCode;
+	return err_code;
 }
 
 
-static void usbvision_ctrlUrb_complete(struct urb *urb)
+static void usbvision_ctrl_urb_complete(struct urb *urb)
 {
 	struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context;
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->ctrlUrbBusy = 0;
-	if (waitqueue_active(&usbvision->ctrlUrb_wq)) {
-		wake_up_interruptible(&usbvision->ctrlUrb_wq);
+	usbvision->ctrl_urb_busy = 0;
+	if (waitqueue_active(&usbvision->ctrl_urb_wq)) {
+		wake_up_interruptible(&usbvision->ctrl_urb_wq);
 	}
 }
 
@@ -1596,146 +1596,146 @@ static void usbvision_ctrlUrb_complete(struct urb *urb)
 static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
 									unsigned char *data, int len)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IRQ, "");
 	if (len > 8) {
 		return -EFAULT;
 	}
-	if (usbvision->ctrlUrbBusy) {
+	if (usbvision->ctrl_urb_busy) {
 		return -EBUSY;
 	}
-	usbvision->ctrlUrbBusy = 1;
+	usbvision->ctrl_urb_busy = 1;
 
-	usbvision->ctrlUrbSetup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
-	usbvision->ctrlUrbSetup.bRequest     = USBVISION_OP_CODE;
-	usbvision->ctrlUrbSetup.wValue       = 0;
-	usbvision->ctrlUrbSetup.wIndex       = cpu_to_le16(address);
-	usbvision->ctrlUrbSetup.wLength      = cpu_to_le16(len);
-	usb_fill_control_urb (usbvision->ctrlUrb, usbvision->dev,
+	usbvision->ctrl_urb_setup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+	usbvision->ctrl_urb_setup.bRequest     = USBVISION_OP_CODE;
+	usbvision->ctrl_urb_setup.wValue       = 0;
+	usbvision->ctrl_urb_setup.wIndex       = cpu_to_le16(address);
+	usbvision->ctrl_urb_setup.wLength      = cpu_to_le16(len);
+	usb_fill_control_urb (usbvision->ctrl_urb, usbvision->dev,
 							usb_sndctrlpipe(usbvision->dev, 1),
-							(unsigned char *)&usbvision->ctrlUrbSetup,
-							(void *)usbvision->ctrlUrbBuffer, len,
-							usbvision_ctrlUrb_complete,
+							(unsigned char *)&usbvision->ctrl_urb_setup,
+							(void *)usbvision->ctrl_urb_buffer, len,
+							usbvision_ctrl_urb_complete,
 							(void *)usbvision);
 
-	memcpy(usbvision->ctrlUrbBuffer, data, len);
+	memcpy(usbvision->ctrl_urb_buffer, data, len);
 
-	errCode = usb_submit_urb(usbvision->ctrlUrb, GFP_ATOMIC);
-	if (errCode < 0) {
+	err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC);
+	if (err_code < 0) {
 		// error in usb_submit_urb()
-		usbvision->ctrlUrbBusy = 0;
+		usbvision->ctrl_urb_busy = 0;
 	}
-	PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, errCode);
-	return errCode;
+	PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code);
+	return err_code;
 }
 
 
 static int usbvision_init_compression(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
-
-	usbvision->lastIsocFrameNum = -1;
-	usbvision->isocDataCount = 0;
-	usbvision->isocPacketCount = 0;
-	usbvision->isocSkipCount = 0;
-	usbvision->comprLevel = 50;
-	usbvision->lastComprLevel = -1;
-	usbvision->isocUrbCount = 0;
-	usbvision->requestIntra = 1;
-	usbvision->isocMeasureBandwidthCount = 0;
-
-	return errCode;
+	int err_code = 0;
+
+	usbvision->last_isoc_frame_num = -1;
+	usbvision->isoc_data_count = 0;
+	usbvision->isoc_packet_count = 0;
+	usbvision->isoc_skip_count = 0;
+	usbvision->compr_level = 50;
+	usbvision->last_compr_level = -1;
+	usbvision->isoc_urb_count = 0;
+	usbvision->request_intra = 1;
+	usbvision->isoc_measure_bandwidth_count = 0;
+
+	return err_code;
 }
 
 /* this function measures the used bandwidth since last call
  * return:    0 : no error
- * sets usedBandwidth to 1-100 : 1-100% of full bandwidth resp. to isocPacketSize
+ * sets used_bandwidth to 1-100 : 1-100% of full bandwidth resp. to isoc_packet_size
  */
 static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
-
-	if (usbvision->isocMeasureBandwidthCount < 2) { // this gives an average bandwidth of 3 frames
-		usbvision->isocMeasureBandwidthCount++;
-		return errCode;
-	}
-	if ((usbvision->isocPacketSize > 0) && (usbvision->isocPacketCount > 0)) {
-		usbvision->usedBandwidth = usbvision->isocDataCount /
-					(usbvision->isocPacketCount + usbvision->isocSkipCount) *
-					100 / usbvision->isocPacketSize;
-	}
-	usbvision->isocMeasureBandwidthCount = 0;
-	usbvision->isocDataCount = 0;
-	usbvision->isocPacketCount = 0;
-	usbvision->isocSkipCount = 0;
-	return errCode;
+	int err_code = 0;
+
+	if (usbvision->isoc_measure_bandwidth_count < 2) { // this gives an average bandwidth of 3 frames
+		usbvision->isoc_measure_bandwidth_count++;
+		return err_code;
+	}
+	if ((usbvision->isoc_packet_size > 0) && (usbvision->isoc_packet_count > 0)) {
+		usbvision->used_bandwidth = usbvision->isoc_data_count /
+					(usbvision->isoc_packet_count + usbvision->isoc_skip_count) *
+					100 / usbvision->isoc_packet_size;
+	}
+	usbvision->isoc_measure_bandwidth_count = 0;
+	usbvision->isoc_data_count = 0;
+	usbvision->isoc_packet_count = 0;
+	usbvision->isoc_skip_count = 0;
+	return err_code;
 }
 
 static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[6];
 
 	PDEBUG(DBG_IRQ, "");
-	if ((adjustCompression) && (usbvision->usedBandwidth > 0)) {
-		usbvision->comprLevel += (usbvision->usedBandwidth - 90) / 2;
-		RESTRICT_TO_RANGE(usbvision->comprLevel, 0, 100);
-		if (usbvision->comprLevel != usbvision->lastComprLevel) {
+	if ((adjust_compression) && (usbvision->used_bandwidth > 0)) {
+		usbvision->compr_level += (usbvision->used_bandwidth - 90) / 2;
+		RESTRICT_TO_RANGE(usbvision->compr_level, 0, 100);
+		if (usbvision->compr_level != usbvision->last_compr_level) {
 			int distorsion;
-			if (usbvision->bridgeType == BRIDGE_NT1004 || usbvision->bridgeType == BRIDGE_NT1005) {
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100);	// PCM Threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100);	// PCM Threshold 2
-				distorsion = 7 + 248 * usbvision->comprLevel / 100;
+			if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) {
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	// PCM Threshold 1
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	// PCM Threshold 2
+				distorsion = 7 + 248 * usbvision->compr_level / 100;
 				buffer[2] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (inter)
 				buffer[3] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (intra)
-				distorsion = 1 + 42 * usbvision->comprLevel / 100;
+				distorsion = 1 + 42 * usbvision->compr_level / 100;
 				buffer[4] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (inter)
 				buffer[5] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (intra)
 			}
 			else { //BRIDGE_NT1003
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100);	// PCM threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100);	// PCM threshold 2
-				distorsion = 2 + 253 * usbvision->comprLevel / 100;
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	// PCM threshold 1
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	// PCM threshold 2
+				distorsion = 2 + 253 * usbvision->compr_level / 100;
 				buffer[2] = (unsigned char)(distorsion & 0xFF);				// distorsion threshold bit0-7
 				buffer[3] = 0; 	//(unsigned char)((distorsion >> 8) & 0x0F);		// distorsion threshold bit 8-11
-				distorsion = 0 + 43 * usbvision->comprLevel / 100;
+				distorsion = 0 + 43 * usbvision->compr_level / 100;
 				buffer[4] = (unsigned char)(distorsion & 0xFF);				// maximum distorsion bit0-7
 				buffer[5] = 0; //(unsigned char)((distorsion >> 8) & 0x01);		// maximum distorsion bit 8
 			}
-			errCode = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
-			if (errCode == 0){
+			err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
+			if (err_code == 0){
 				PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0],
 								buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]);
-				usbvision->lastComprLevel = usbvision->comprLevel;
+				usbvision->last_compr_level = usbvision->compr_level;
 			}
 		}
 	}
-	return errCode;
+	return err_code;
 }
 
 static int usbvision_request_intra (struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->requestIntra = 1;
+	usbvision->request_intra = 1;
 	buffer[0] = 1;
 	usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
-	return errCode;
+	return err_code;
 }
 
 static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->requestIntra = 0;
+	usbvision->request_intra = 0;
 	buffer[0] = 0;
 	usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
-	return errCode;
+	return err_code;
 }
 
 /*******************************
@@ -1744,16 +1744,16 @@ static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
 
 int usbvision_power_off(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_FUNC, "");
 
-	errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
-	if (errCode == 1) {
+	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
+	if (err_code == 1) {
 		usbvision->power = 0;
 	}
-	PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode!=1)?"ERROR":"power is off", errCode);
-	return errCode;
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code!=1)?"ERROR":"power is off", err_code);
+	return err_code;
 }
 
 /*
@@ -1769,7 +1769,7 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
-	PDEBUG(DBG_FUNC, "isocMode %#02x", format);
+	PDEBUG(DBG_FUNC, "isoc_mode %#02x", format);
 
 	if ((format != ISOC_MODE_YUV422)
 	    && (format != ISOC_MODE_YUV420)
@@ -1790,7 +1790,7 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 		printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - "
 		       "reconnect or reload driver.\n", proc, rc);
 	}
-	usbvision->isocMode = format;
+	usbvision->isoc_mode = format;
 	return rc;
 }
 
@@ -1802,9 +1802,9 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 			 int height)
 {
-	int errCode = 0;
-	int UsbWidth, UsbHeight;
-	unsigned int frameRate=0, frameDrop=0;
+	int err_code = 0;
+	int usb_width, usb_height;
+	unsigned int frame_rate=0, frame_drop=0;
 	unsigned char value[4];
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
@@ -1812,86 +1812,86 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 	}
 
 	if (width > MAX_USB_WIDTH) {
-		UsbWidth = width / 2;
+		usb_width = width / 2;
 		usbvision->stretch_width = 2;
 	}
 	else {
-		UsbWidth = width;
+		usb_width = width;
 		usbvision->stretch_width = 1;
 	}
 
 	if (height > MAX_USB_HEIGHT) {
-		UsbHeight = height / 2;
+		usb_height = height / 2;
 		usbvision->stretch_height = 2;
 	}
 	else {
-		UsbHeight = height;
+		usb_height = height;
 		usbvision->stretch_height = 1;
 	}
 
-	RESTRICT_TO_RANGE(UsbWidth, MIN_FRAME_WIDTH, MAX_USB_WIDTH);
-	UsbWidth &= ~(MIN_FRAME_WIDTH-1);
-	RESTRICT_TO_RANGE(UsbHeight, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT);
-	UsbHeight &= ~(1);
+	RESTRICT_TO_RANGE(usb_width, MIN_FRAME_WIDTH, MAX_USB_WIDTH);
+	usb_width &= ~(MIN_FRAME_WIDTH-1);
+	RESTRICT_TO_RANGE(usb_height, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT);
+	usb_height &= ~(1);
 
 	PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d",
-						UsbWidth, UsbHeight, width, height,
+						usb_width, usb_height, width, height,
 						usbvision->stretch_width, usbvision->stretch_height);
 
 	/* I'll not rewrite the same values */
-	if ((UsbWidth != usbvision->curwidth) || (UsbHeight != usbvision->curheight)) {
-		value[0] = UsbWidth & 0xff;		//LSB
-		value[1] = (UsbWidth >> 8) & 0x03;	//MSB
-		value[2] = UsbHeight & 0xff;		//LSB
-		value[3] = (UsbHeight >> 8) & 0x03;	//MSB
+	if ((usb_width != usbvision->curwidth) || (usb_height != usbvision->curheight)) {
+		value[0] = usb_width & 0xff;		//LSB
+		value[1] = (usb_width >> 8) & 0x03;	//MSB
+		value[2] = usb_height & 0xff;		//LSB
+		value[3] = (usb_height >> 8) & 0x03;	//MSB
 
-		errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+		err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 			     USBVISION_OP_CODE,
 			     USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
 				 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ);
 
-		if (errCode < 0) {
+		if (err_code < 0) {
 			dev_err(&usbvision->dev->dev,
-				"%s failed: error %d\n", __func__, errCode);
-			return errCode;
+				"%s failed: error %d\n", __func__, err_code);
+			return err_code;
 		}
-		usbvision->curwidth = usbvision->stretch_width * UsbWidth;
-		usbvision->curheight = usbvision->stretch_height * UsbHeight;
+		usbvision->curwidth = usbvision->stretch_width * usb_width;
+		usbvision->curheight = usbvision->stretch_height * usb_height;
 	}
 
-	if (usbvision->isocMode == ISOC_MODE_YUV422) {
-		frameRate = (usbvision->isocPacketSize * 1000) / (UsbWidth * UsbHeight * 2);
+	if (usbvision->isoc_mode == ISOC_MODE_YUV422) {
+		frame_rate = (usbvision->isoc_packet_size * 1000) / (usb_width * usb_height * 2);
 	}
-	else if (usbvision->isocMode == ISOC_MODE_YUV420) {
-		frameRate = (usbvision->isocPacketSize * 1000) / ((UsbWidth * UsbHeight * 12) / 8);
+	else if (usbvision->isoc_mode == ISOC_MODE_YUV420) {
+		frame_rate = (usbvision->isoc_packet_size * 1000) / ((usb_width * usb_height * 12) / 8);
 	}
 	else {
-		frameRate = FRAMERATE_MAX;
+		frame_rate = FRAMERATE_MAX;
 	}
 
-	if (usbvision->tvnormId & V4L2_STD_625_50) {
-		frameDrop = frameRate * 32 / 25 - 1;
+	if (usbvision->tvnorm_id & V4L2_STD_625_50) {
+		frame_drop = frame_rate * 32 / 25 - 1;
 	}
-	else if (usbvision->tvnormId & V4L2_STD_525_60) {
-		frameDrop = frameRate * 32 / 30 - 1;
+	else if (usbvision->tvnorm_id & V4L2_STD_525_60) {
+		frame_drop = frame_rate * 32 / 30 - 1;
 	}
 
-	RESTRICT_TO_RANGE(frameDrop, FRAMERATE_MIN, FRAMERATE_MAX);
+	RESTRICT_TO_RANGE(frame_drop, FRAMERATE_MIN, FRAMERATE_MAX);
 
-	PDEBUG(DBG_FUNC, "frameRate %d fps, frameDrop %d", frameRate, frameDrop);
+	PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop);
 
-	frameDrop = FRAMERATE_MAX; 	// We can allow the maximum here, because dropping is controlled
+	frame_drop = FRAMERATE_MAX; 	// We can allow the maximum here, because dropping is controlled
 
-	/* frameDrop = 7; => framePhase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
-		=> frameSkip = 4;
-		=> frameRate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25;
+	/* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
+		=> frame_skip = 4;
+		=> frame_rate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25;
 
-	   frameDrop = 9; => framePhase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ...
-	    => frameSkip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ...
-		=> frameRate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125;
+	   frame_drop = 9; => frame_phase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ...
+	    => frame_skip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ...
+		=> frame_rate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125;
 	*/
-	errCode = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frameDrop);
-	return errCode;
+	err_code = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frame_drop);
+	return err_code;
 }
 
 
@@ -1925,7 +1925,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 	/* Allocate all buffers */
 	for (i = 0; i < usbvision->num_frames; i++) {
 		usbvision->frame[i].index = i;
-		usbvision->frame[i].grabstate = FrameState_Unused;
+		usbvision->frame[i].grabstate = frame_state_unused;
 		usbvision->frame[i].data = usbvision->fbuf +
 			i * usbvision->max_frame_size;
 		/*
@@ -1969,7 +1969,7 @@ void usbvision_empty_framequeues(struct usb_usbvision *usbvision)
 	INIT_LIST_HEAD(&(usbvision->outqueue));
 
 	for (i = 0; i < USBVISION_NUMFRAMES; i++) {
-		usbvision->frame[i].grabstate = FrameState_Unused;
+		usbvision->frame[i].grabstate = frame_state_unused;
 		usbvision->frame[i].bytes_read = 0;
 	}
 }
@@ -1984,9 +1984,9 @@ int usbvision_stream_interrupt(struct usb_usbvision *usbvision)
 
 	/* stop reading from the device */
 
-	usbvision->streaming = Stream_Interrupt;
+	usbvision->streaming = stream_interrupt;
 	ret = wait_event_timeout(usbvision->wait_stream,
-				 (usbvision->streaming == Stream_Idle),
+				 (usbvision->streaming == stream_idle),
 				 msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES));
 	return ret;
 }
@@ -2030,7 +2030,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 		return rc;
 	}
 
-	if (usbvision->bridgeType == BRIDGE_NT1004) {
+	if (usbvision->bridge_type == BRIDGE_NT1004) {
 		value[0] =  20; // PCM Threshold 1
 		value[1] =  12; // PCM Threshold 2
 		value[2] = 255; // Distorsion Threshold inter
@@ -2085,9 +2085,9 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 		return 0;
 
 	/* Set input format expected from decoder*/
-	if (usbvision_device_data[usbvision->DevModel].Vin_Reg1_override) {
-		value[0] = usbvision_device_data[usbvision->DevModel].Vin_Reg1;
-	} else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
+	if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) {
+		value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1;
+	} else if(usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
 		/* SAA7113 uses 8 bit output */
 		value[0] = USBVISION_8_422_SYNC;
 	} else {
@@ -2105,7 +2105,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 	}
 
 
-	if (usbvision->tvnormId & V4L2_STD_PAL) {
+	if (usbvision->tvnorm_id & V4L2_STD_PAL) {
 		value[0] = 0xC0;
 		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
 		value[2] = 0x20;
@@ -2114,7 +2114,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 		value[5] = 0x00;	//0x0060 -> 96 Input video h offset
 		value[6] = 0x16;
 		value[7] = 0x00;	//0x0016 -> 22 Input video v offset
-	} else if (usbvision->tvnormId & V4L2_STD_SECAM) {
+	} else if (usbvision->tvnorm_id & V4L2_STD_SECAM) {
 		value[0] = 0xC0;
 		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
 		value[2] = 0x20;
@@ -2134,24 +2134,24 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 		value[7] = 0x00;	//0x0010 -> 16 Input video v offset
 	}
 
-	if (usbvision_device_data[usbvision->DevModel].X_Offset >= 0) {
-		value[4]=usbvision_device_data[usbvision->DevModel].X_Offset & 0xff;
-		value[5]=(usbvision_device_data[usbvision->DevModel].X_Offset & 0x0300) >> 8;
+	if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) {
+		value[4]=usbvision_device_data[usbvision->dev_model].x_offset & 0xff;
+		value[5]=(usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8;
 	}
 
-	if (adjust_X_Offset != -1) {
-		value[4] = adjust_X_Offset & 0xff;
-		value[5] = (adjust_X_Offset & 0x0300) >> 8;
+	if (adjust_x_offset != -1) {
+		value[4] = adjust_x_offset & 0xff;
+		value[5] = (adjust_x_offset & 0x0300) >> 8;
 	}
 
-	if (usbvision_device_data[usbvision->DevModel].Y_Offset >= 0) {
-		value[6]=usbvision_device_data[usbvision->DevModel].Y_Offset & 0xff;
-		value[7]=(usbvision_device_data[usbvision->DevModel].Y_Offset & 0x0300) >> 8;
+	if (usbvision_device_data[usbvision->dev_model].y_offset >= 0) {
+		value[6]=usbvision_device_data[usbvision->dev_model].y_offset & 0xff;
+		value[7]=(usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8;
 	}
 
-	if (adjust_Y_Offset != -1) {
-		value[6] = adjust_Y_Offset & 0xff;
-		value[7] = (adjust_Y_Offset & 0x0300) >> 8;
+	if (adjust_y_offset != -1) {
+		value[6] = adjust_y_offset & 0xff;
+		value[7] = (adjust_y_offset & 0x0300) >> 8;
 	}
 
 	rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
@@ -2167,10 +2167,10 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 
 	dvi_yuv_value = 0x00;	/* U comes after V, Ya comes after U/V, Yb comes after Yb */
 
-	if(usbvision_device_data[usbvision->DevModel].Dvi_yuv_override){
-		dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv;
+	if(usbvision_device_data[usbvision->dev_model].dvi_yuv_override){
+		dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv;
 	}
-	else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
+	else if(usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
 	/* This changes as the fine sync control changes. Further investigation necessary */
 		dvi_yuv_value = 0x06;
 	}
@@ -2192,7 +2192,7 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	int rc;
 	unsigned char value[8];
 
-	if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
 		value[0] = 0x42;
 		value[1] = 0x71;
 		value[2] = 0xff;
@@ -2261,7 +2261,7 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 
 int usbvision_power_on(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_FUNC, "");
 
@@ -2271,13 +2271,13 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
 
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG,
 			 USBVISION_SSPND_EN | USBVISION_PWR_VID);
-	errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
 						USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
-	if (errCode == 1) {
+	if (err_code == 1) {
 		usbvision->power = 1;
 	}
-	PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode<0)?"ERROR":"power is on", errCode);
-	return errCode;
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code<0)?"ERROR":"power is on", err_code);
+	return err_code;
 }
 
 
@@ -2288,7 +2288,7 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
 // to call usbvision_power_off from task queue
 static void call_usbvision_power_off(struct work_struct *work)
 {
-	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, powerOffWork);
+	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, power_off_work);
 
 	PDEBUG(DBG_FUNC, "");
 	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
@@ -2303,32 +2303,32 @@ static void call_usbvision_power_off(struct work_struct *work)
 	mutex_unlock(&usbvision->v4l2_lock);
 }
 
-static void usbvision_powerOffTimer(unsigned long data)
+static void usbvision_power_off_timer(unsigned long data)
 {
 	struct usb_usbvision *usbvision = (void *) data;
 
 	PDEBUG(DBG_FUNC, "");
-	del_timer(&usbvision->powerOffTimer);
-	INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off);
-	(void) schedule_work(&usbvision->powerOffWork);
+	del_timer(&usbvision->power_off_timer);
+	INIT_WORK(&usbvision->power_off_work, call_usbvision_power_off);
+	(void) schedule_work(&usbvision->power_off_work);
 }
 
-void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_init_power_off_timer(struct usb_usbvision *usbvision)
 {
-	init_timer(&usbvision->powerOffTimer);
-	usbvision->powerOffTimer.data = (long) usbvision;
-	usbvision->powerOffTimer.function = usbvision_powerOffTimer;
+	init_timer(&usbvision->power_off_timer);
+	usbvision->power_off_timer.data = (long) usbvision;
+	usbvision->power_off_timer.function = usbvision_power_off_timer;
 }
 
-void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_set_power_off_timer(struct usb_usbvision *usbvision)
 {
-	mod_timer(&usbvision->powerOffTimer, jiffies + USBVISION_POWEROFF_TIME);
+	mod_timer(&usbvision->power_off_timer, jiffies + USBVISION_POWEROFF_TIME);
 }
 
-void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision)
 {
-	if (timer_pending(&usbvision->powerOffTimer)) {
-		del_timer(&usbvision->powerOffTimer);
+	if (timer_pending(&usbvision->power_off_timer)) {
+		del_timer(&usbvision->power_off_timer);
 	}
 }
 
@@ -2339,14 +2339,14 @@ void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision)
  */
 int usbvision_begin_streaming(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 
-	if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
 		usbvision_init_compression(usbvision);
 	}
-	errCode = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID |
-										usbvision->Vin_Reg2_Preset);
-	return errCode;
+	err_code = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID |
+										usbvision->vin_reg2_preset);
+	return err_code;
 }
 
 /*
@@ -2373,7 +2373,7 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision)
 	    (ret =
 	     usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
 			      USBVISION_KEEP_BLANK | USBVISION_NOHVALID |
-				  usbvision->Vin_Reg2_Preset)) < 0) return ret;
+				  usbvision->vin_reg2_preset)) < 0) return ret;
 
 	/* TODO: schedule timeout */
 	while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1);
@@ -2387,20 +2387,20 @@ int usbvision_audio_off(struct usb_usbvision *usbvision)
 		printk(KERN_ERR "usbvision_audio_off: can't wirte reg\n");
 		return -1;
 	}
-	usbvision->AudioMute = 0;
-	usbvision->AudioChannel = USBVISION_AUDIO_MUTE;
+	usbvision->audio_mute = 0;
+	usbvision->audio_channel = USBVISION_AUDIO_MUTE;
 	return 0;
 }
 
-int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel)
+int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel)
 {
-	if (!usbvision->AudioMute) {
-		if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, AudioChannel) < 0) {
+	if (!usbvision->audio_mute) {
+		if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, audio_channel) < 0) {
 			printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n");
 			return -1;
 		}
 	}
-	usbvision->AudioChannel = AudioChannel;
+	usbvision->audio_channel = audio_channel;
 	return 0;
 }
 
@@ -2419,27 +2419,27 @@ int usbvision_setup(struct usb_usbvision *usbvision,int format)
 
 int usbvision_set_alternate(struct usb_usbvision *dev)
 {
-	int errCode, prev_alt = dev->ifaceAlt;
+	int err_code, prev_alt = dev->iface_alt;
 	int i;
 
-	dev->ifaceAlt=0;
+	dev->iface_alt=0;
 	for(i=0;i< dev->num_alt; i++)
-		if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->ifaceAlt])
-			dev->ifaceAlt=i;
-
-	if (dev->ifaceAlt != prev_alt) {
-		dev->isocPacketSize = dev->alt_max_pkt_size[dev->ifaceAlt];
-		PDEBUG(DBG_FUNC,"setting alternate %d with wMaxPacketSize=%u", dev->ifaceAlt,dev->isocPacketSize);
-		errCode = usb_set_interface(dev->dev, dev->iface, dev->ifaceAlt);
-		if (errCode < 0) {
+		if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->iface_alt])
+			dev->iface_alt=i;
+
+	if (dev->iface_alt != prev_alt) {
+		dev->isoc_packet_size = dev->alt_max_pkt_size[dev->iface_alt];
+		PDEBUG(DBG_FUNC,"setting alternate %d with max_packet_size=%u", dev->iface_alt,dev->isoc_packet_size);
+		err_code = usb_set_interface(dev->dev, dev->iface, dev->iface_alt);
+		if (err_code < 0) {
 			dev_err(&dev->dev->dev,
 				"cannot change alternate number to %d (error=%i)\n",
-					dev->ifaceAlt, errCode);
-			return errCode;
+					dev->iface_alt, err_code);
+			return err_code;
 		}
 	}
 
-	PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isocPacketSize);
+	PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isoc_packet_size);
 
 	return 0;
 }
@@ -2451,27 +2451,27 @@ int usbvision_set_alternate(struct usb_usbvision *dev)
 int usbvision_init_isoc(struct usb_usbvision *usbvision)
 {
 	struct usb_device *dev = usbvision->dev;
-	int bufIdx, errCode, regValue;
+	int buf_idx, err_code, reg_value;
 	int sb_size;
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -EFAULT;
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 	scratch_reset(usbvision);
 
 	/* Alternate interface 1 is is the biggest frame size */
-	errCode = usbvision_set_alternate(usbvision);
-	if (errCode < 0) {
-		usbvision->last_error = errCode;
+	err_code = usbvision_set_alternate(usbvision);
+	if (err_code < 0) {
+		usbvision->last_error = err_code;
 		return -EBUSY;
 	}
-	sb_size = USBVISION_URB_FRAMES * usbvision->isocPacketSize;
+	sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size;
 
-	regValue = (16 - usbvision_read_reg(usbvision,
+	reg_value = (16 - usbvision_read_reg(usbvision,
 					    USBVISION_ALTER_REG)) & 0x0F;
 
-	usbvision->usb_bandwidth = regValue >> 1;
+	usbvision->usb_bandwidth = reg_value >> 1;
 	PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec",
 	       usbvision->usb_bandwidth);
 
@@ -2479,7 +2479,7 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 
 	/* We double buffer the Iso lists */
 
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
 		int j, k;
 		struct urb *urb;
 
@@ -2489,8 +2489,8 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 				"%s: usb_alloc_urb() failed\n", __func__);
 			return -ENOMEM;
 		}
-		usbvision->sbuf[bufIdx].urb = urb;
-		usbvision->sbuf[bufIdx].data =
+		usbvision->sbuf[buf_idx].urb = urb;
+		usbvision->sbuf[buf_idx].data =
 			usb_alloc_coherent(usbvision->dev,
 					   sb_size,
 					   GFP_KERNEL,
@@ -2500,31 +2500,31 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 		urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp);
 		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
 		urb->interval = 1;
-		urb->transfer_buffer = usbvision->sbuf[bufIdx].data;
-		urb->complete = usbvision_isocIrq;
+		urb->transfer_buffer = usbvision->sbuf[buf_idx].data;
+		urb->complete = usbvision_isoc_irq;
 		urb->number_of_packets = USBVISION_URB_FRAMES;
 		urb->transfer_buffer_length =
-		    usbvision->isocPacketSize * USBVISION_URB_FRAMES;
+		    usbvision->isoc_packet_size * USBVISION_URB_FRAMES;
 		for (j = k = 0; j < USBVISION_URB_FRAMES; j++,
-		     k += usbvision->isocPacketSize) {
+		     k += usbvision->isoc_packet_size) {
 			urb->iso_frame_desc[j].offset = k;
 			urb->iso_frame_desc[j].length =
-				usbvision->isocPacketSize;
+				usbvision->isoc_packet_size;
 		}
 	}
 
 	/* Submit all URBs */
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
-			errCode = usb_submit_urb(usbvision->sbuf[bufIdx].urb,
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
+			err_code = usb_submit_urb(usbvision->sbuf[buf_idx].urb,
 						 GFP_KERNEL);
-		if (errCode) {
+		if (err_code) {
 			dev_err(&usbvision->dev->dev,
 				"%s: usb_submit_urb(%d) failed: error %d\n",
-					__func__, bufIdx, errCode);
+					__func__, buf_idx, err_code);
 		}
 	}
 
-	usbvision->streaming = Stream_Idle;
+	usbvision->streaming = stream_idle;
 	PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x",
 	       __func__,
 	       usbvision->video_endp);
@@ -2540,47 +2540,47 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
  */
 void usbvision_stop_isoc(struct usb_usbvision *usbvision)
 {
-	int bufIdx, errCode, regValue;
-	int sb_size = USBVISION_URB_FRAMES * usbvision->isocPacketSize;
+	int buf_idx, err_code, reg_value;
+	int sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size;
 
-	if ((usbvision->streaming == Stream_Off) || (usbvision->dev == NULL))
+	if ((usbvision->streaming == stream_off) || (usbvision->dev == NULL))
 		return;
 
 	/* Unschedule all of the iso td's */
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
-		usb_kill_urb(usbvision->sbuf[bufIdx].urb);
-		if (usbvision->sbuf[bufIdx].data){
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
+		usb_kill_urb(usbvision->sbuf[buf_idx].urb);
+		if (usbvision->sbuf[buf_idx].data){
 			usb_free_coherent(usbvision->dev,
 					  sb_size,
-					  usbvision->sbuf[bufIdx].data,
-					  usbvision->sbuf[bufIdx].urb->transfer_dma);
+					  usbvision->sbuf[buf_idx].data,
+					  usbvision->sbuf[buf_idx].urb->transfer_dma);
 		}
-		usb_free_urb(usbvision->sbuf[bufIdx].urb);
-		usbvision->sbuf[bufIdx].urb = NULL;
+		usb_free_urb(usbvision->sbuf[buf_idx].urb);
+		usbvision->sbuf[buf_idx].urb = NULL;
 	}
 
-	PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __func__);
-	usbvision->streaming = Stream_Off;
+	PDEBUG(DBG_ISOC, "%s: streaming=stream_off\n", __func__);
+	usbvision->streaming = stream_off;
 
 	if (!usbvision->remove_pending) {
 
 		/* Set packet size to 0 */
-		usbvision->ifaceAlt=0;
-		errCode = usb_set_interface(usbvision->dev, usbvision->iface,
-					    usbvision->ifaceAlt);
-		if (errCode < 0) {
+		usbvision->iface_alt=0;
+		err_code = usb_set_interface(usbvision->dev, usbvision->iface,
+					    usbvision->iface_alt);
+		if (err_code < 0) {
 			dev_err(&usbvision->dev->dev,
 				"%s: usb_set_interface() failed: error %d\n",
-					__func__, errCode);
-			usbvision->last_error = errCode;
+					__func__, err_code);
+			usbvision->last_error = err_code;
 		}
-		regValue = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
-		usbvision->isocPacketSize =
-			(regValue == 0) ? 0 : (regValue * 64) - 1;
+		reg_value = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
+		usbvision->isoc_packet_size =
+			(reg_value == 0) ? 0 : (reg_value * 64) - 1;
 		PDEBUG(DBG_ISOC, "ISO Packet Length:%d",
-		       usbvision->isocPacketSize);
+		       usbvision->isoc_packet_size);
 
-		usbvision->usb_bandwidth = regValue >> 1;
+		usbvision->usb_bandwidth = reg_value >> 1;
 		PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec",
 		       usbvision->usb_bandwidth);
 	}
@@ -2604,12 +2604,12 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
 	// Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
 	// Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
 
-	switch (usbvision_device_data[usbvision->DevModel].Codec) {
+	switch (usbvision_device_data[usbvision->dev_model].codec) {
 		case CODEC_SAA7113:
 			mode[1] = SAA7115_COMPOSITE2;
-			if (SwitchSVideoInput) {
+			if (switch_svideo_input) {
 				/* To handle problems with S-Video Input for
-				 * some devices.  Use SwitchSVideoInput
+				 * some devices.  Use switch_svideo_input
 				 * parameter when loading the module.*/
 				mode[2] = SAA7115_COMPOSITE1;
 			}
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 81dd53bb5267..7b2cd00bf004 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -244,7 +244,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 	PDEBUG(DBG_I2C, "i2c bus for %s registered", usbvision->i2c_adap.name);
 
 	/* Request the load of the i2c modules we need */
-	switch (usbvision_device_data[usbvision->DevModel].Codec) {
+	switch (usbvision_device_data[usbvision->dev_model].codec) {
 	case CODEC_SAA7113:
 	case CODEC_SAA7111:
 		/* Without this delay the detection of the saa711x is
@@ -255,7 +255,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 				"saa7115_auto", 0, saa711x_addrs);
 		break;
 	}
-	if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
+	if (usbvision_device_data[usbvision->dev_model].tuner == 1) {
 		struct v4l2_subdev *sd;
 		enum v4l2_i2c_tuner_type type;
 		struct tuner_setup tun_setup;
@@ -426,18 +426,18 @@ static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision,
 static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf,
 			    short len)
 {
-	char *bufPtr = buf;
+	char *buf_ptr = buf;
 	int retval;
 	int wrcount = 0;
 	int count;
-	int maxLen = 4;
+	int max_len = 4;
 
 	while (len > 0) {
-		count = (len > maxLen) ? maxLen : len;
-		retval = usbvision_i2c_write_max4(usbvision, addr, bufPtr, count);
+		count = (len > max_len) ? max_len : len;
+		retval = usbvision_i2c_write_max4(usbvision, addr, buf_ptr, count);
 		if (retval > 0) {
 			len -= count;
-			bufPtr += count;
+			buf_ptr += count;
 			wrcount += count;
 		} else
 			return (retval < 0) ? retval : -EFAULT;
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index a5709a576772..4882ea087b92 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -127,11 +127,11 @@ static void usbvision_release(struct usb_usbvision *usbvision);
 
 /* Default initialization of device driver parameters */
 /* Set the default format for ISOC endpoint */
-static int isocMode = ISOC_MODE_COMPRESS;
+static int isoc_mode = ISOC_MODE_COMPRESS;
 /* Set the default Debug Mode of the device driver */
 static int video_debug;
 /* Set the default device to power on at startup */
-static int PowerOnAtOpen = 1;
+static int power_on_at_open = 1;
 /* Sequential Number of Video Device */
 static int video_nr = -1;
 /* Sequential Number of Radio Device */
@@ -140,15 +140,15 @@ static int radio_nr = -1;
 /* Grab parameters for the device driver */
 
 /* Showing parameters under SYSFS */
-module_param(isocMode, int, 0444);
+module_param(isoc_mode, int, 0444);
 module_param(video_debug, int, 0444);
-module_param(PowerOnAtOpen, int, 0444);
+module_param(power_on_at_open, int, 0444);
 module_param(video_nr, int, 0444);
 module_param(radio_nr, int, 0444);
 
-MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint.  Default: 0x60 (Compression On)");
+MODULE_PARM_DESC(isoc_mode, " Set the default format for ISOC endpoint.  Default: 0x60 (Compression On)");
 MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver.  Default: 0 (Off)");
-MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened.  Default: 1 (On)");
+MODULE_PARM_DESC(power_on_at_open, " Set the default device to power on when device is opened.  Default: 1 (On)");
 MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX).  Default: -1 (autodetect)");
 MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
 
@@ -192,7 +192,7 @@ static ssize_t show_model(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       usbvision_device_data[usbvision->DevModel].ModelString);
+		       usbvision_device_data[usbvision->dev_model].model_string);
 }
 static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
 
@@ -263,7 +263,7 @@ static ssize_t show_streaming(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->streaming==Stream_On?1:0));
+		       YES_NO(usbvision->streaming==stream_on?1:0));
 }
 static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
 
@@ -274,7 +274,7 @@ static ssize_t show_compression(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
+		       YES_NO(usbvision->isoc_mode==ISOC_MODE_COMPRESS));
 }
 static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
 
@@ -284,7 +284,7 @@ static ssize_t show_device_bridge(struct device *cd,
 	struct video_device *vdev =
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
-	return sprintf(buf, "%d\n", usbvision->bridgeType);
+	return sprintf(buf, "%d\n", usbvision->bridge_type);
 }
 static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
 
@@ -352,23 +352,23 @@ static void usbvision_remove_sysfs(struct video_device *vdev)
 static int usbvision_v4l2_open(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "open");
 
-	usbvision_reset_powerOffTimer(usbvision);
+	usbvision_reset_power_off_timer(usbvision);
 
 	if (usbvision->user)
-		errCode = -EBUSY;
+		err_code = -EBUSY;
 	else {
 		/* Allocate memory for the scratch ring buffer */
-		errCode = usbvision_scratch_alloc(usbvision);
-		if (isocMode==ISOC_MODE_COMPRESS) {
+		err_code = usbvision_scratch_alloc(usbvision);
+		if (isoc_mode==ISOC_MODE_COMPRESS) {
 			/* Allocate intermediate decompression buffers
 			   only if needed */
-			errCode = usbvision_decompress_alloc(usbvision);
+			err_code = usbvision_decompress_alloc(usbvision);
 		}
-		if (errCode) {
+		if (err_code) {
 			/* Deallocate all buffers if trouble */
 			usbvision_scratch_free(usbvision);
 			usbvision_decompress_free(usbvision);
@@ -376,7 +376,7 @@ static int usbvision_v4l2_open(struct file *file)
 	}
 
 	/* If so far no errors then we shall start the camera */
-	if (!errCode) {
+	if (!err_code) {
 		if (usbvision->power == 0) {
 			usbvision_power_on(usbvision);
 			usbvision_i2c_register(usbvision);
@@ -385,21 +385,21 @@ static int usbvision_v4l2_open(struct file *file)
 		/* Send init sequence only once, it's large! */
 		if (!usbvision->initialized) {
 			int setup_ok = 0;
-			setup_ok = usbvision_setup(usbvision,isocMode);
+			setup_ok = usbvision_setup(usbvision,isoc_mode);
 			if (setup_ok)
 				usbvision->initialized = 1;
 			else
-				errCode = -EBUSY;
+				err_code = -EBUSY;
 		}
 
-		if (!errCode) {
+		if (!err_code) {
 			usbvision_begin_streaming(usbvision);
-			errCode = usbvision_init_isoc(usbvision);
+			err_code = usbvision_init_isoc(usbvision);
 			/* device must be initialized before isoc transfer */
 			usbvision_muxsel(usbvision,0);
 			usbvision->user++;
 		} else {
-			if (PowerOnAtOpen) {
+			if (power_on_at_open) {
 				usbvision_i2c_unregister(usbvision);
 				usbvision_power_off(usbvision);
 				usbvision->initialized = 0;
@@ -411,7 +411,7 @@ static int usbvision_v4l2_open(struct file *file)
 	usbvision_empty_framequeues(usbvision);
 
 	PDEBUG(DBG_IO, "success");
-	return errCode;
+	return err_code;
 }
 
 /*
@@ -439,10 +439,10 @@ static int usbvision_v4l2_close(struct file *file)
 
 	usbvision->user--;
 
-	if (PowerOnAtOpen) {
+	if (power_on_at_open) {
 		/* power off in a little while
 		   to avoid off/on every close/open short sequences */
-		usbvision_set_powerOffTimer(usbvision);
+		usbvision_set_power_off_timer(usbvision);
 		usbvision->initialized = 0;
 	}
 
@@ -467,19 +467,19 @@ static int vidioc_g_register (struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode;
+	int err_code;
 
 	if (!v4l2_chip_match_host(&reg->match))
 		return -EINVAL;
 	/* NT100x has a 8-bit register space */
-	errCode = usbvision_read_reg(usbvision, reg->reg&0xff);
-	if (errCode < 0) {
+	err_code = usbvision_read_reg(usbvision, reg->reg&0xff);
+	if (err_code < 0) {
 		dev_err(&usbvision->vdev->dev,
 			"%s: VIDIOC_DBG_G_REGISTER failed: error %d\n",
-				__func__, errCode);
-		return errCode;
+				__func__, err_code);
+		return err_code;
 	}
-	reg->val = errCode;
+	reg->val = err_code;
 	reg->size = 1;
 	return 0;
 }
@@ -488,17 +488,17 @@ static int vidioc_s_register (struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode;
+	int err_code;
 
 	if (!v4l2_chip_match_host(&reg->match))
 		return -EINVAL;
 	/* NT100x has a 8-bit register space */
-	errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
-	if (errCode < 0) {
+	err_code = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
+	if (err_code < 0) {
 		dev_err(&usbvision->vdev->dev,
 			"%s: VIDIOC_DBG_S_REGISTER failed: error %d\n",
-				__func__, errCode);
-		return errCode;
+				__func__, err_code);
+		return err_code;
 	}
 	return 0;
 }
@@ -511,7 +511,7 @@ static int vidioc_querycap (struct file *file, void  *priv,
 
 	strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
 	strlcpy(vc->card,
-		usbvision_device_data[usbvision->DevModel].ModelString,
+		usbvision_device_data[usbvision->dev_model].model_string,
 		sizeof(vc->card));
 	usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info));
 	vc->version = USBVISION_DRIVER_VERSION;
@@ -540,7 +540,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 	   specific for each usbvision card model */
 	switch(chan) {
 	case 0:
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
 			strcpy(vi->name, "White Video Input");
 		} else {
 			strcpy(vi->name, "Television");
@@ -552,7 +552,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 		break;
 	case 1:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
 			strcpy(vi->name, "Green Video Input");
 		} else {
 			strcpy(vi->name, "Composite Video Input");
@@ -561,7 +561,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 		break;
 	case 2:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
 			strcpy(vi->name, "Yellow Video Input");
 		} else {
 			strcpy(vi->name, "S-Video Input");
@@ -604,9 +604,9 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	usbvision->tvnormId=*id;
+	usbvision->tvnorm_id=*id;
 
-	call_all(usbvision, core, s_std, usbvision->tvnormId);
+	call_all(usbvision, core, s_std, usbvision->tvnorm_id);
 	/* propagate the change to the decoder */
 	usbvision_muxsel(usbvision, usbvision->ctl_input);
 
@@ -744,7 +744,7 @@ static int vidioc_reqbufs (struct file *file,
 	if (vr->memory != V4L2_MEMORY_MMAP)
 		return -EINVAL;
 
-	if(usbvision->streaming == Stream_On) {
+	if(usbvision->streaming == stream_on) {
 		if ((ret = usbvision_stream_interrupt(usbvision)))
 			return ret;
 	}
@@ -753,7 +753,7 @@ static int vidioc_reqbufs (struct file *file,
 	usbvision_empty_framequeues(usbvision);
 	vr->count = usbvision_frames_alloc(usbvision,vr->count);
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 
 	return 0;
 }
@@ -772,11 +772,11 @@ static int vidioc_querybuf (struct file *file,
 	/* Updating the corresponding frame state */
 	vb->flags = 0;
 	frame = &usbvision->frame[vb->index];
-	if(frame->grabstate >= FrameState_Ready)
+	if(frame->grabstate >= frame_state_ready)
 		vb->flags |= V4L2_BUF_FLAG_QUEUED;
-	if(frame->grabstate >= FrameState_Done)
+	if(frame->grabstate >= frame_state_done)
 		vb->flags |= V4L2_BUF_FLAG_DONE;
-	if(frame->grabstate == FrameState_Unused)
+	if(frame->grabstate == frame_state_unused)
 		vb->flags |= V4L2_BUF_FLAG_MAPPED;
 	vb->memory = V4L2_MEMORY_MMAP;
 
@@ -805,13 +805,13 @@ static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 
 	frame = &usbvision->frame[vb->index];
 
-	if (frame->grabstate != FrameState_Unused) {
+	if (frame->grabstate != frame_state_unused) {
 		return -EAGAIN;
 	}
 
 	/* Mark it as ready and enqueue frame */
-	frame->grabstate = FrameState_Ready;
-	frame->scanstate = ScanState_Scanning;
+	frame->grabstate = frame_state_ready;
+	frame->scanstate = scan_state_scanning;
 	frame->scanlength = 0;	/* Accumulated in usbvision_parse_data() */
 
 	vb->flags &= ~V4L2_BUF_FLAG_DONE;
@@ -834,7 +834,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	unsigned long lock_flags;
 
 	if (list_empty(&(usbvision->outqueue))) {
-		if (usbvision->streaming == Stream_Idle)
+		if (usbvision->streaming == stream_idle)
 			return -EINVAL;
 		ret = wait_event_interruptible
 			(usbvision->wait_frame,
@@ -849,7 +849,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	list_del(usbvision->outqueue.next);
 	spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
-	f->grabstate = FrameState_Unused;
+	f->grabstate = frame_state_unused;
 
 	vb->memory = V4L2_MEMORY_MMAP;
 	vb->flags = V4L2_BUF_FLAG_MAPPED |
@@ -868,7 +868,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	usbvision->streaming = Stream_On;
+	usbvision->streaming = stream_on;
 	call_all(usbvision, video, s_stream, 1);
 
 	return 0;
@@ -882,7 +882,7 @@ static int vidioc_streamoff(struct file *file,
 	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	if(usbvision->streaming == Stream_On) {
+	if(usbvision->streaming == stream_on) {
 		usbvision_stream_interrupt(usbvision);
 		/* Stop all video streamings */
 		call_all(usbvision, video, s_stream, 0);
@@ -923,18 +923,18 @@ static int vidioc_try_fmt_vid_cap (struct file *file, void *priv,
 			       struct v4l2_format *vf)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int formatIdx;
+	int format_idx;
 
 	/* Find requested format in available ones */
-	for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) {
+	for(format_idx=0;format_idx<USBVISION_SUPPORTED_PALETTES;format_idx++) {
 		if(vf->fmt.pix.pixelformat ==
-		   usbvision_v4l2_format[formatIdx].format) {
-			usbvision->palette = usbvision_v4l2_format[formatIdx];
+		   usbvision_v4l2_format[format_idx].format) {
+			usbvision->palette = usbvision_v4l2_format[format_idx];
 			break;
 		}
 	}
 	/* robustness */
-	if(formatIdx == USBVISION_SUPPORTED_PALETTES) {
+	if(format_idx == USBVISION_SUPPORTED_PALETTES) {
 		return -EINVAL;
 	}
 	RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
@@ -958,14 +958,14 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	/* stop io in case it is already in progress */
-	if(usbvision->streaming == Stream_On) {
+	if(usbvision->streaming == stream_on) {
 		if ((ret = usbvision_stream_interrupt(usbvision)))
 			return ret;
 	}
 	usbvision_frames_free(usbvision);
 	usbvision_empty_framequeues(usbvision);
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 
 	/* by now we are committed to the new data... */
 	usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
@@ -1000,9 +1000,9 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 		usbvision_frames_alloc(usbvision,USBVISION_NUMFRAMES);
 	}
 
-	if(usbvision->streaming != Stream_On) {
+	if(usbvision->streaming != stream_on) {
 		/* no stream is running, make it running ! */
-		usbvision->streaming = Stream_On;
+		usbvision->streaming = stream_on;
 		call_all(usbvision, video, s_stream, 1);
 	}
 
@@ -1010,10 +1010,10 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	   (like a user of VIDIOC_QBUF would do) */
 	for(i=0;i<usbvision->num_frames;i++) {
 		frame = &usbvision->frame[i];
-		if(frame->grabstate == FrameState_Unused) {
+		if(frame->grabstate == frame_state_unused) {
 			/* Mark it as ready and enqueue frame */
-			frame->grabstate = FrameState_Ready;
-			frame->scanstate = ScanState_Scanning;
+			frame->grabstate = frame_state_ready;
+			frame->scanstate = scan_state_scanning;
 			/* Accumulated in usbvision_parse_data() */
 			frame->scanlength = 0;
 
@@ -1046,7 +1046,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
 	/* An error returns an empty frame */
-	if (frame->grabstate == FrameState_Error) {
+	if (frame->grabstate == frame_state_error) {
 		frame->bytes_read = 0;
 		return 0;
 	}
@@ -1073,7 +1073,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 		frame->bytes_read = 0;
 
 		/* Mark it as available to be used again. */
-		frame->grabstate = FrameState_Unused;
+		frame->grabstate = frame_state_unused;
 /* 	} */
 
 	return count;
@@ -1136,7 +1136,7 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 static int usbvision_radio_open(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "%s:", __func__);
 
@@ -1144,11 +1144,11 @@ static int usbvision_radio_open(struct file *file)
 		dev_err(&usbvision->rdev->dev,
 			"%s: Someone tried to open an already opened USBVision Radio!\n",
 				__func__);
-		errCode = -EBUSY;
+		err_code = -EBUSY;
 	}
 	else {
-		if(PowerOnAtOpen) {
-			usbvision_reset_powerOffTimer(usbvision);
+		if(power_on_at_open) {
+			usbvision_reset_power_off_timer(usbvision);
 			if (usbvision->power == 0) {
 				usbvision_power_on(usbvision);
 				usbvision_i2c_register(usbvision);
@@ -1156,10 +1156,10 @@ static int usbvision_radio_open(struct file *file)
 		}
 
 		/* Alternate interface 1 is is the biggest frame size */
-		errCode = usbvision_set_alternate(usbvision);
-		if (errCode < 0) {
-			usbvision->last_error = errCode;
-			errCode = -EBUSY;
+		err_code = usbvision_set_alternate(usbvision);
+		if (err_code < 0) {
+			usbvision->last_error = err_code;
+			err_code = -EBUSY;
 			goto out;
 		}
 
@@ -1170,36 +1170,36 @@ static int usbvision_radio_open(struct file *file)
 		usbvision->user++;
 	}
 
-	if (errCode) {
-		if (PowerOnAtOpen) {
+	if (err_code) {
+		if (power_on_at_open) {
 			usbvision_i2c_unregister(usbvision);
 			usbvision_power_off(usbvision);
 			usbvision->initialized = 0;
 		}
 	}
 out:
-	return errCode;
+	return err_code;
 }
 
 
 static int usbvision_radio_close(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "");
 
 	/* Set packet size to 0 */
-	usbvision->ifaceAlt=0;
-	errCode = usb_set_interface(usbvision->dev, usbvision->iface,
-				    usbvision->ifaceAlt);
+	usbvision->iface_alt=0;
+	err_code = usb_set_interface(usbvision->dev, usbvision->iface,
+				    usbvision->iface_alt);
 
 	usbvision_audio_off(usbvision);
 	usbvision->radio=0;
 	usbvision->user--;
 
-	if (PowerOnAtOpen) {
-		usbvision_set_powerOffTimer(usbvision);
+	if (power_on_at_open) {
+		usbvision_set_power_off_timer(usbvision);
 		usbvision->initialized = 0;
 	}
 
@@ -1209,7 +1209,7 @@ static int usbvision_radio_close(struct file *file)
 	}
 
 	PDEBUG(DBG_IO, "success");
-	return errCode;
+	return err_code;
 }
 
 //
@@ -1375,7 +1375,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 	       usbvision->nr, video_device_node_name(usbvision->vdev));
 
 	// Radio Device:
-	if (usbvision_device_data[usbvision->DevModel].Radio) {
+	if (usbvision_device_data[usbvision->dev_model].radio) {
 		// usbvision has radio
 		usbvision->rdev = usbvision_vdev_init(usbvision,
 						      &usbvision_radio_template,
@@ -1427,12 +1427,12 @@ static struct usb_usbvision *usbvision_alloc(struct usb_device *dev,
 	mutex_init(&usbvision->v4l2_lock);
 
 	// prepare control urb for control messages during interrupts
-	usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
-	if (usbvision->ctrlUrb == NULL)
+	usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
+	if (usbvision->ctrl_urb == NULL)
 		goto err_unreg;
-	init_waitqueue_head(&usbvision->ctrlUrb_wq);
+	init_waitqueue_head(&usbvision->ctrl_urb_wq);
 
-	usbvision_init_powerOffTimer(usbvision);
+	usbvision_init_power_off_timer(usbvision);
 
 	return usbvision;
 
@@ -1454,15 +1454,15 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 {
 	PDEBUG(DBG_PROBE, "");
 
-	usbvision_reset_powerOffTimer(usbvision);
+	usbvision_reset_power_off_timer(usbvision);
 
 	usbvision->initialized = 0;
 
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
 
-	if (usbvision->ctrlUrb) {
-		usb_free_urb(usbvision->ctrlUrb);
+	if (usbvision->ctrl_urb) {
+		usb_free_urb(usbvision->ctrl_urb);
 	}
 
 	v4l2_device_unregister(&usbvision->v4l2_dev);
@@ -1481,25 +1481,25 @@ static void usbvision_configure_video(struct usb_usbvision *usbvision)
 	if (usbvision == NULL)
 		return;
 
-	model = usbvision->DevModel;
+	model = usbvision->dev_model;
 	usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
 
-	if (usbvision_device_data[usbvision->DevModel].Vin_Reg2_override) {
-		usbvision->Vin_Reg2_Preset =
-			usbvision_device_data[usbvision->DevModel].Vin_Reg2;
+	if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) {
+		usbvision->vin_reg2_preset =
+			usbvision_device_data[usbvision->dev_model].vin_reg2;
 	} else {
-		usbvision->Vin_Reg2_Preset = 0;
+		usbvision->vin_reg2_preset = 0;
 	}
 
-	usbvision->tvnormId = usbvision_device_data[model].VideoNorm;
+	usbvision->tvnorm_id = usbvision_device_data[model].video_norm;
 
-	usbvision->video_inputs = usbvision_device_data[model].VideoChannels;
+	usbvision->video_inputs = usbvision_device_data[model].video_channels;
 	usbvision->ctl_input = 0;
 
 	/* This should be here to make i2c clients to be able to register */
 	/* first switch off audio */
 	usbvision_audio_off(usbvision);
-	if (!PowerOnAtOpen) {
+	if (!power_on_at_open) {
 		/* and then power up the noisy tuner */
 		usbvision_power_on(usbvision);
 		usbvision_i2c_register(usbvision);
@@ -1534,10 +1534,10 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 		return -ENODEV;
 	}
 	printk(KERN_INFO "%s: %s found\n", __func__,
-				usbvision_device_data[model].ModelString);
+				usbvision_device_data[model].model_string);
 
-	if (usbvision_device_data[model].Interface >= 0) {
-		interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0];
+	if (usbvision_device_data[model].interface >= 0) {
+		interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
 	} else {
 		interface = &dev->actconfig->interface[ifnum]->altsetting[0];
 	}
@@ -1562,13 +1562,13 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	}
 
 	if (dev->descriptor.bNumConfigurations > 1) {
-		usbvision->bridgeType = BRIDGE_NT1004;
+		usbvision->bridge_type = BRIDGE_NT1004;
 	} else if (model == DAZZLE_DVC_90_REV_1_SECAM) {
-		usbvision->bridgeType = BRIDGE_NT1005;
+		usbvision->bridge_type = BRIDGE_NT1005;
 	} else {
-		usbvision->bridgeType = BRIDGE_NT1003;
+		usbvision->bridge_type = BRIDGE_NT1003;
 	}
-	PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType);
+	PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type);
 
 	/* compute alternate max packet sizes */
 	uif = dev->actconfig->interface[0];
@@ -1594,20 +1594,20 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 
 	usbvision->nr = usbvision_nr++;
 
-	usbvision->have_tuner = usbvision_device_data[model].Tuner;
+	usbvision->have_tuner = usbvision_device_data[model].tuner;
 	if (usbvision->have_tuner) {
-		usbvision->tuner_type = usbvision_device_data[model].TunerType;
+		usbvision->tuner_type = usbvision_device_data[model].tuner_type;
 	}
 
-	usbvision->DevModel = model;
+	usbvision->dev_model = model;
 	usbvision->remove_pending = 0;
 	usbvision->iface = ifnum;
-	usbvision->ifaceAlt = 0;
+	usbvision->iface_alt = 0;
 	usbvision->video_endp = endpoint->bEndpointAddress;
-	usbvision->isocPacketSize = 0;
+	usbvision->isoc_packet_size = 0;
 	usbvision->usb_bandwidth = 0;
 	usbvision->user = 0;
-	usbvision->streaming = Stream_Off;
+	usbvision->streaming = stream_off;
 	usbvision_configure_video(usbvision);
 	usbvision_register_video(usbvision);
 
@@ -1682,7 +1682,7 @@ static struct usb_driver usbvision_driver = {
  */
 static int __init usbvision_init(void)
 {
-	int errCode;
+	int err_code;
 
 	PDEBUG(DBG_PROBE, "");
 
@@ -1691,19 +1691,19 @@ static int __init usbvision_init(void)
 	PDEBUG(DBG_MMAP, "MMAP    debugging is enabled [video]");
 
 	/* disable planar mode support unless compression enabled */
-	if (isocMode != ISOC_MODE_COMPRESS ) {
+	if (isoc_mode != ISOC_MODE_COMPRESS ) {
 		// FIXME : not the right way to set supported flag
 		usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
 		usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
 	}
 
-	errCode = usb_register(&usbvision_driver);
+	err_code = usb_register(&usbvision_driver);
 
-	if (errCode == 0) {
+	if (err_code == 0) {
 		printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n");
 		PDEBUG(DBG_PROBE, "success");
 	}
-	return errCode;
+	return err_code;
 }
 
 static void __exit usbvision_exit(void)
diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h
index 2271ede78ddf..42189e500143 100644
--- a/drivers/media/video/usbvision/usbvision.h
+++ b/drivers/media/video/usbvision/usbvision.h
@@ -223,39 +223,39 @@ enum {
 /* ----------------------------------------------------------------- */
 /* usbvision video structures                                        */
 /* ----------------------------------------------------------------- */
-enum ScanState {
-	ScanState_Scanning,	/* Scanning for header */
-	ScanState_Lines		/* Parsing lines */
+enum scan_state {
+	scan_state_scanning,	/* Scanning for header */
+	scan_state_lines	/* Parsing lines */
 };
 
 /* Completion states of the data parser */
-enum ParseState {
-	ParseState_Continue,	/* Just parse next item */
-	ParseState_NextFrame,	/* Frame done, send it to V4L */
-	ParseState_Out,		/* Not enough data for frame */
-	ParseState_EndParse	/* End parsing */
+enum parse_state {
+	parse_state_continue,	/* Just parse next item */
+	parse_state_next_frame,	/* Frame done, send it to V4L */
+	parse_state_out,	/* Not enough data for frame */
+	parse_state_end_parse	/* End parsing */
 };
 
-enum FrameState {
-	FrameState_Unused,	/* Unused (no MCAPTURE) */
-	FrameState_Ready,	/* Ready to start grabbing */
-	FrameState_Grabbing,	/* In the process of being grabbed into */
-	FrameState_Done,	/* Finished grabbing, but not been synced yet */
-	FrameState_DoneHold,	/* Are syncing or reading */
-	FrameState_Error,	/* Something bad happened while processing */
+enum frame_state {
+	frame_state_unused,	/* Unused (no MCAPTURE) */
+	frame_state_ready,	/* Ready to start grabbing */
+	frame_state_grabbing,	/* In the process of being grabbed into */
+	frame_state_done,	/* Finished grabbing, but not been synced yet */
+	frame_state_done_hold,	/* Are syncing or reading */
+	frame_state_error,	/* Something bad happened while processing */
 };
 
 /* stream states */
-enum StreamState {
-	Stream_Off,		/* Driver streaming is completely OFF */
-	Stream_Idle,		/* Driver streaming is ready to be put ON by the application */
-	Stream_Interrupt,	/* Driver streaming must be interrupted */
-	Stream_On,		/* Driver streaming is put ON by the application */
+enum stream_state {
+	stream_off,		/* Driver streaming is completely OFF */
+	stream_idle,		/* Driver streaming is ready to be put ON by the application */
+	stream_interrupt,	/* Driver streaming must be interrupted */
+	stream_on,		/* Driver streaming is put ON by the application */
 };
 
-enum IsocState {
-	IsocState_InFrame,	/* Isoc packet is member of frame */
-	IsocState_NoFrame,	/* Isoc packet is not member of any frame */
+enum isoc_state {
+	isoc_state_in_frame,	/* Isoc packet is member of frame */
+	isoc_state_no_frame,	/* Isoc packet is not member of any frame */
 };
 
 struct usb_device;
@@ -286,23 +286,23 @@ struct usbvision_v4l2_format_st {
 struct usbvision_frame_header {
 	unsigned char magic_1;				/* 0 magic */
 	unsigned char magic_2;				/* 1  magic */
-	unsigned char headerLength;			/* 2 */
-	unsigned char frameNum;				/* 3 */
-	unsigned char framePhase;			/* 4 */
-	unsigned char frameLatency;			/* 5 */
-	unsigned char dataFormat;			/* 6 */
-	unsigned char formatParam;			/* 7 */
-	unsigned char frameWidthLo;			/* 8 */
-	unsigned char frameWidthHi;			/* 9 */
-	unsigned char frameHeightLo;			/* 10 */
-	unsigned char frameHeightHi;			/* 11 */
-	__u16 frameWidth;				/* 8 - 9 after endian correction*/
-	__u16 frameHeight;				/* 10 - 11 after endian correction*/
+	unsigned char header_length;			/* 2 */
+	unsigned char frame_num;				/* 3 */
+	unsigned char frame_phase;			/* 4 */
+	unsigned char frame_latency;			/* 5 */
+	unsigned char data_format;			/* 6 */
+	unsigned char format_param;			/* 7 */
+	unsigned char frame_width_lo;			/* 8 */
+	unsigned char frame_width_hi;			/* 9 */
+	unsigned char frame_height_lo;			/* 10 */
+	unsigned char frame_height_hi;			/* 11 */
+	__u16 frame_width;				/* 8 - 9 after endian correction*/
+	__u16 frame_height;				/* 10 - 11 after endian correction*/
 };
 
 struct usbvision_frame {
 	char *data;					/* Frame buffer */
-	struct usbvision_frame_header isocHeader;	/* Header from stream */
+	struct usbvision_frame_header isoc_header;	/* Header from stream */
 
 	int width;					/* Width application is expecting */
 	int height;					/* Height */
@@ -332,24 +332,24 @@ struct usbvision_frame {
 #define BRIDGE_NT1005   1005
 
 struct usbvision_device_data_st {
-	__u64 VideoNorm;
-	const char *ModelString;
-	int Interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
-	__u16 Codec;
-	unsigned VideoChannels:3;
-	unsigned AudioChannels:2;
-	unsigned Radio:1;
+	__u64 video_norm;
+	const char *model_string;
+	int interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
+	__u16 codec;
+	unsigned video_channels:3;
+	unsigned audio_channels:2;
+	unsigned radio:1;
 	unsigned vbi:1;
-	unsigned Tuner:1;
-	unsigned Vin_Reg1_override:1;	/* Override default value with */
-	unsigned Vin_Reg2_override:1;   /* Vin_Reg1, Vin_Reg2, etc. */
-	unsigned Dvi_yuv_override:1;
-	__u8 Vin_Reg1;
-	__u8 Vin_Reg2;
-	__u8 Dvi_yuv;
-	__u8 TunerType;
-	__s16 X_Offset;
-	__s16 Y_Offset;
+	unsigned tuner:1;
+	unsigned vin_reg1_override:1;	/* Override default value with */
+	unsigned vin_reg2_override:1;   /* vin_reg1, vin_reg2, etc. */
+	unsigned dvi_yuv_override:1;
+	__u8 vin_reg1;
+	__u8 vin_reg2;
+	__u8 dvi_yuv;
+	__u8 tuner_type;
+	__s16 x_offset;
+	__s16 y_offset;
 };
 
 /* Declared on usbvision-cards.c */
@@ -365,40 +365,40 @@ struct usb_usbvision {
 	struct i2c_adapter i2c_adap;
 	int registered_i2c;
 
-	struct urb *ctrlUrb;
-	unsigned char ctrlUrbBuffer[8];
-	int ctrlUrbBusy;
-	struct usb_ctrlrequest ctrlUrbSetup;
-	wait_queue_head_t ctrlUrb_wq;					// Processes waiting
+	struct urb *ctrl_urb;
+	unsigned char ctrl_urb_buffer[8];
+	int ctrl_urb_busy;
+	struct usb_ctrlrequest ctrl_urb_setup;
+	wait_queue_head_t ctrl_urb_wq;					// Processes waiting
 
 	/* configuration part */
 	int have_tuner;
 	int tuner_type;
-	int bridgeType;							// NT1003, NT1004, NT1005
+	int bridge_type;							// NT1003, NT1004, NT1005
 	int radio;
 	int video_inputs;						// # of inputs
 	unsigned long freq;
-	int AudioMute;
-	int AudioChannel;
-	int isocMode;							// format of video data for the usb isoc-transfer
+	int audio_mute;
+	int audio_channel;
+	int isoc_mode;							// format of video data for the usb isoc-transfer
 	unsigned int nr;						// Number of the device
 
 	/* Device structure */
 	struct usb_device *dev;
 	/* usb transfer */
 	int num_alt;		/* Number of alternative settings */
-	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
+	unsigned int *alt_max_pkt_size;	/* array of max_packet_size */
 	unsigned char iface;						/* Video interface number */
-	unsigned char ifaceAlt;			/* Alt settings */
-	unsigned char Vin_Reg2_Preset;
+	unsigned char iface_alt;			/* Alt settings */
+	unsigned char vin_reg2_preset;
 	struct mutex v4l2_lock;
-	struct timer_list powerOffTimer;
-	struct work_struct powerOffWork;
+	struct timer_list power_off_timer;
+	struct work_struct power_off_work;
 	int power;							/* is the device powered on? */
 	int user;							/* user count for exclusive use */
 	int initialized;						/* Had we already sent init sequence? */
-	int DevModel;							/* What type of USBVISION device we got? */
-	enum StreamState streaming;					/* Are we streaming Isochronous? */
+	int dev_model;							/* What type of USBVISION device we got? */
+	enum stream_state streaming;					/* Are we streaming Isochronous? */
 	int last_error;							/* What calamity struck us? */
 	int curwidth;							/* width of the frame the device is currently set to*/
 	int curheight;      						/* height of the frame the device is currently set to*/
@@ -411,7 +411,7 @@ struct usb_usbvision {
 	struct list_head inqueue, outqueue;                             /* queued frame list and ready to dequeue frame list */
 	wait_queue_head_t wait_frame;					/* Processes waiting */
 	wait_queue_head_t wait_stream;					/* Processes waiting */
-	struct usbvision_frame *curFrame;				// pointer to current frame, set by usbvision_find_header
+	struct usbvision_frame *cur_frame;				// pointer to current frame, set by usbvision_find_header
 	struct usbvision_frame frame[USBVISION_NUMFRAMES];		// frame buffer
 	int num_frames;							// number of frames allocated
 	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			// S buffering
@@ -424,43 +424,43 @@ struct usb_usbvision {
 	int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
 	int scratch_headermarker_read_ptr;
 	int scratch_headermarker_write_ptr;
-	enum IsocState isocstate;
+	enum isoc_state isocstate;
 	struct usbvision_v4l2_format_st palette;
 
 	struct v4l2_capability vcap;					/* Video capabilities */
 	unsigned int ctl_input;						/* selected input */
-	v4l2_std_id tvnormId;						/* selected tv norm */
+	v4l2_std_id tvnorm_id;						/* selected tv norm */
 	unsigned char video_endp;					/* 0x82 for USBVISION devices based */
 
 	// Decompression stuff:
-	unsigned char *IntraFrameBuffer;				/* Buffer for reference frame */
-	int BlockPos; 							//for test only
-	int requestIntra;						// 0 = normal; 1 = intra frame is requested;
-	int lastIsocFrameNum;						// check for lost isoc frames
-	int isocPacketSize;						// need to calculate usedBandwidth
-	int usedBandwidth;						// used bandwidth 0-100%, need to set comprLevel
-	int comprLevel;							// How strong (100) or weak (0) is compression
-	int lastComprLevel;						// How strong (100) or weak (0) was compression
+	unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
+	int block_pos; 							//for test only
+	int request_intra;						// 0 = normal; 1 = intra frame is requested;
+	int last_isoc_frame_num;						// check for lost isoc frames
+	int isoc_packet_size;						// need to calculate used_bandwidth
+	int used_bandwidth;						// used bandwidth 0-100%, need to set compr_level
+	int compr_level;							// How strong (100) or weak (0) is compression
+	int last_compr_level;						// How strong (100) or weak (0) was compression
 	int usb_bandwidth;						/* Mbit/s */
 
 	/* Statistics that can be overlayed on the screen */
-	unsigned long isocUrbCount;			// How many URBs we received so far
+	unsigned long isoc_urb_count;			// How many URBs we received so far
 	unsigned long urb_length;			/* Length of last URB */
-	unsigned long isocDataCount;			/* How many bytes we received */
+	unsigned long isoc_data_count;			/* How many bytes we received */
 	unsigned long header_count;			/* How many frame headers we found */
 	unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
-	unsigned long isocSkipCount;			/* How many empty ISO packets received */
-	unsigned long isocErrCount;			/* How many bad ISO packets received */
-	unsigned long isocPacketCount;			// How many packets we totally got
-	unsigned long timeInIrq;			// How long do we need for interrupt
-	int isocMeasureBandwidthCount;
+	unsigned long isoc_skip_count;			/* How many empty ISO packets received */
+	unsigned long isoc_err_count;			/* How many bad ISO packets received */
+	unsigned long isoc_packet_count;			// How many packets we totally got
+	unsigned long time_in_irq;			// How long do we need for interrupt
+	int isoc_measure_bandwidth_count;
 	int frame_num;					// How many video frames we send to user
-	int maxStripLen;				// How big is the biggest strip
-	int comprBlockPos;
-	int stripLenErrors;				// How many times was BlockPos greater than StripLen
-	int stripMagicErrors;
-	int stripLineNumberErrors;
-	int ComprBlockTypes[4];
+	int max_strip_len;				// How big is the biggest strip
+	int comprblock_pos;
+	int strip_len_errors;				// How many times was block_pos greater than strip_len
+	int strip_magic_errors;
+	int strip_line_number_errors;
+	int compr_block_types[4];
 };
 
 static inline struct usb_usbvision *to_usbvision(struct v4l2_device *v4l2_dev)
@@ -500,7 +500,7 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision);
 void usbvision_stop_isoc(struct usb_usbvision *usbvision);
 int usbvision_set_alternate(struct usb_usbvision *dev);
 
-int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel);
+int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel);
 int usbvision_audio_off(struct usb_usbvision *usbvision);
 
 int usbvision_begin_streaming(struct usb_usbvision *usbvision);
@@ -511,9 +511,9 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel);
 int usbvision_set_input(struct usb_usbvision *usbvision);
 int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
 
-void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision);
-void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision);
-void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision);
+void usbvision_init_power_off_timer(struct usb_usbvision *usbvision);
+void usbvision_set_power_off_timer(struct usb_usbvision *usbvision);
+void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision);
 int usbvision_power_off(struct usb_usbvision *usbvision);
 int usbvision_power_on(struct usb_usbvision *usbvision);
 
-- 
cgit v1.2.3


From 52cb0bf275debe4ec8950157f11b9d9f14447a88 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 19 Dec 2010 20:33:51 -0300
Subject: [media] usbvision: convert // to /* */

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/usbvision/usbvision-core.c  | 222 ++++++++++++------------
 drivers/media/video/usbvision/usbvision-i2c.c   |   2 +-
 drivers/media/video/usbvision/usbvision-video.c |  60 ++++---
 drivers/media/video/usbvision/usbvision.h       |  64 +++----
 4 files changed, 173 insertions(+), 175 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index 372e21b35ed3..64a913323181 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -103,10 +103,10 @@ static const int min_imgheight = MIN_FRAME_HEIGHT;
  * to work with. This setting can be adjusted, but the default value
  * should be OK for most desktop users.
  */
-#define DEFAULT_SCRATCH_BUF_SIZE	(0x20000)		// 128kB memory scratch buffer
+#define DEFAULT_SCRATCH_BUF_SIZE	(0x20000)		/* 128kB memory scratch buffer */
 static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
 
-// Function prototypes
+/* Function prototypes */
 static int usbvision_request_intra (struct usb_usbvision *usbvision);
 static int usbvision_unrequest_intra (struct usb_usbvision *usbvision);
 static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
@@ -183,7 +183,7 @@ static void usbvision_hexdump(const unsigned char *data, int len)
 /********************************
  * scratch ring buffer handling
  ********************************/
-static int scratch_len(struct usb_usbvision *usbvision)    /*This returns the amount of data actually in the buffer */
+static int scratch_len(struct usb_usbvision *usbvision)    /* This returns the amount of data actually in the buffer */
 {
 	int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr;
 	if (len < 0) {
@@ -287,7 +287,7 @@ static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr,
 }
 
 
-/*This increments the scratch extra read pointer */
+/* This increments the scratch extra read pointer */
 static void scratch_inc_extra_ptr(int *ptr, int len)
 {
 	*ptr = (*ptr + len) % scratch_buf_size;
@@ -352,7 +352,7 @@ static int scratch_get_header(struct usb_usbvision *usbvision,
 }
 
 
-/*This removes len bytes of old data from the buffer */
+/* This removes len bytes of old data from the buffer */
 static void scratch_rm_old(struct usb_usbvision *usbvision, int len)
 {
 
@@ -362,7 +362,7 @@ static void scratch_rm_old(struct usb_usbvision *usbvision, int len)
 }
 
 
-/*This resets the buffer - kills all data in it too */
+/* This resets the buffer - kills all data in it too */
 static void scratch_reset(struct usb_usbvision *usbvision)
 {
 	PDEBUG(DBG_SCRATCH, "\n");
@@ -525,7 +525,7 @@ static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 	frame = usbvision->cur_frame;
 
 	while (scratch_get_header(usbvision, &frame->isoc_header) == USBVISION_HEADER_LENGTH) {
-		// found header in scratch
+		/* found header in scratch */
 		PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u",
 				frame->isoc_header.magic_2,
 				frame->isoc_header.magic_1,
@@ -541,7 +541,7 @@ static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 		if (usbvision->request_intra) {
 			if (frame->isoc_header.format_param & 0x80) {
 				found_header = 1;
-				usbvision->last_isoc_frame_num = -1; // do not check for lost frames this time
+				usbvision->last_isoc_frame_num = -1; /* do not check for lost frames this time */
 				usbvision_unrequest_intra(usbvision);
 				break;
 			}
@@ -557,18 +557,18 @@ static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 		frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height;
 		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3;
 	}
-	else { // no header found
+	else { /* no header found */
 		PDEBUG(DBG_HEADER, "skipping scratch data, no header");
 		scratch_reset(usbvision);
 		return parse_state_end_parse;
 	}
 
-	// found header
+	/* found header */
 	if (frame->isoc_header.data_format==ISOC_MODE_COMPRESS) {
-		//check isoc_header.frame_num for lost frames
+		/* check isoc_header.frame_num for lost frames */
 		if (usbvision->last_isoc_frame_num >= 0) {
 			if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) {
-				// unexpected frame drop: need to request new intra frame
+				/* unexpected frame drop: need to request new intra frame */
 				PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isoc_header.frame_num);
 				usbvision_request_intra(usbvision);
 				return parse_state_next_frame;
@@ -594,8 +594,8 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 	unsigned char *f;
 	int len;
 	int i;
-	unsigned char yuyv[4]={180, 128, 10, 128}; // YUV components
-	unsigned char rv, gv, bv;	// RGB components
+	unsigned char yuyv[4]={180, 128, 10, 128}; /* YUV components */
+	unsigned char rv, gv, bv;	/* RGB components */
 	int clipmask_index, bytes_per_pixel;
 	int stretch_bytes, clipmask_add;
 
@@ -623,8 +623,8 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 		scratch_get(usbvision, &yuyv[0], 4);
 
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = yuyv[0]; // Y
-			*f++ = yuyv[3]; // U
+			*f++ = yuyv[0]; /* Y */
+			*f++ = yuyv[3]; /* U */
 		}
 		else {
 
@@ -659,8 +659,8 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 		f += stretch_bytes;
 
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = yuyv[2]; // Y
-			*f++ = yuyv[1]; // V
+			*f++ = yuyv[2]; /* Y */
+			*f++ = yuyv[1]; /* V */
 		}
 		else {
 
@@ -717,7 +717,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 	integrator = 0;
 	pos = *start_pos;
 	block_type_pos = *block_typestart_pos;
-	max_pos = 396; //pos + len;
+	max_pos = 396; /* pos + len; */
 	extra_pos = pos;
 	block_len = 0;
 	block_byte = 0;
@@ -737,7 +737,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 			}
 			block_type = (block_type_byte & 0xC0) >> 6;
 
-			//statistic:
+			/* statistic: */
 			usbvision->compr_block_types[block_type]++;
 
 			pos = extra_pos;
@@ -769,7 +769,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 				block_byte = compressed[pos];
 				pos++;
 			}
-			if (block_type == 1) { //inter Block
+			if (block_type == 1) { /* inter Block */
 				integrator = decompressed[idx];
 			}
 			switch (block_byte & 0xC0) {
@@ -823,14 +823,14 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 	frame  = usbvision->cur_frame;
 	image_size = frame->frmwidth * frame->frmheight;
 	if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
-	     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) {       // this is a planar format
-		//... v4l2_linesize not used here.
+	     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) {       /* this is a planar format */
+		/* ... v4l2_linesize not used here. */
 		f = frame->data + (frame->width * frame->curline);
 	} else
 		f = frame->data + (frame->v4l2_linesize * frame->curline);
 
-	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers
-		// get base of u and b planes add halfoffset
+	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ /* initialise u and v pointers */
+		/* get base of u and b planes add halfoffset */
 
 		u = frame->data
 			+ image_size
@@ -851,31 +851,31 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 		return parse_state_out;
 	}
 
-	//get strip header without changing the scratch_read_ptr
+	/* get strip header without changing the scratch_read_ptr */
 	scratch_set_extra_ptr(usbvision, &strip_ptr, 0);
 	scratch_get_extra(usbvision, &strip_header[0], &strip_ptr,
 				USBVISION_STRIP_HEADER_LEN);
 
 	if (strip_header[0] != USBVISION_STRIP_MAGIC) {
-		// wrong strip magic
+		/* wrong strip magic */
 		usbvision->strip_magic_errors++;
 		return parse_state_next_frame;
 	}
 
 	if (frame->curline != (int)strip_header[2]) {
-		//line number missmatch error
+		/* line number missmatch error */
 		usbvision->strip_line_number_errors++;
 	}
 
 	strip_len = 2 * (unsigned int)strip_header[1];
 	if (strip_len > USBVISION_STRIP_LEN_MAX) {
-		// strip overrun
-		// I think this never happens
+		/* strip overrun */
+		/* I think this never happens */
 		usbvision_request_intra(usbvision);
 	}
 
 	if (scratch_len(usbvision) < strip_len) {
-		//there is not enough data for the strip
+		/* there is not enough data for the strip */
 		return parse_state_out;
 	}
 
@@ -901,7 +901,7 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 	usbvision->block_pos = block_pos;
 
 	if ((rc = usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end)) != idx_end) {
-		//return parse_state_continue;
+		/* return parse_state_continue; */
 	}
 	if (strip_len > usbvision->max_strip_len) {
 		usbvision->max_strip_len = strip_len;
@@ -909,12 +909,12 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 
 	if (frame->curline%2) {
 		if ((rc = usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
-		//return parse_state_continue;
+		/* return parse_state_continue; */
 		}
 	}
 	else {
 		if ((rc = usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
-			//return parse_state_continue;
+			/* return parse_state_continue; */
 		}
 	}
 
@@ -1043,7 +1043,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 	pixel_per_line = frame->isoc_header.frame_width;
 
 	if (scratch_len(usbvision) < (int)pixel_per_line * 3) {
-		//printk(KERN_DEBUG "out of data, need %d\n", len);
+		/* printk(KERN_DEBUG "out of data, need %d\n", len); */
 		return parse_state_out;
 	}
 
@@ -1051,7 +1051,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 		return parse_state_next_frame;
 	}
 
-	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	//are some blocks splitted into different lines?
+	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	/* are some blocks splitted into different lines? */
 
 	y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size)
 			+ block_split * uv_block_size;
@@ -1070,7 +1070,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 			scratch_get_extra(usbvision, &u, &u_ptr, 1);
 			scratch_get_extra(usbvision, &v, &v_ptr, 1);
 
-			//I don't use the YUV_TO_RGB macro for better performance
+			/* I don't use the YUV_TO_RGB macro for better performance */
 			v_ = v - 128;
 			u_ = u - 128;
 			vb =              132252 * v_;
@@ -1370,7 +1370,7 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
 
 		/* Detect and ignore errored packets */
-		if (packet_stat) {	// packet_stat != 0 ?????????????
+		if (packet_stat) {	/* packet_stat != 0 ????????????? */
 			PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat);
 			usbvision->isoc_err_count++;
 			continue;
@@ -1396,7 +1396,7 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 
 		PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len);
 
-		if (usbvision->isocstate==isoc_state_no_frame) { //new frame begins
+		if (usbvision->isocstate==isoc_state_no_frame) { /* new frame begins */
 			usbvision->isocstate=isoc_state_in_frame;
 			scratch_mark_header(usbvision);
 			usbvision_measure_bandwidth(usbvision);
@@ -1488,7 +1488,7 @@ static void usbvision_isoc_irq(struct urb *urb)
 			usbvision_parse_data(usbvision);
 		}
 		else {
-			/*If we don't have a frame
+			/* If we don't have a frame
 			  we're current working on, complain */
 			PDEBUG(DBG_IRQ,
 			       "received data, but no one needs it");
@@ -1623,7 +1623,7 @@ static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
 
 	err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC);
 	if (err_code < 0) {
-		// error in usb_submit_urb()
+		/* error in usb_submit_urb() */
 		usbvision->ctrl_urb_busy = 0;
 	}
 	PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code);
@@ -1656,7 +1656,7 @@ static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
 {
 	int err_code = 0;
 
-	if (usbvision->isoc_measure_bandwidth_count < 2) { // this gives an average bandwidth of 3 frames
+	if (usbvision->isoc_measure_bandwidth_count < 2) { /* this gives an average bandwidth of 3 frames */
 		usbvision->isoc_measure_bandwidth_count++;
 		return err_code;
 	}
@@ -1684,24 +1684,24 @@ static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
 		if (usbvision->compr_level != usbvision->last_compr_level) {
 			int distorsion;
 			if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) {
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	// PCM Threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	// PCM Threshold 2
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM Threshold 1 */
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM Threshold 2 */
 				distorsion = 7 + 248 * usbvision->compr_level / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (inter)
-				buffer[3] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (intra)
+				buffer[2] = (unsigned char)(distorsion & 0xFF);				/* Average distorsion Threshold (inter) */
+				buffer[3] = (unsigned char)(distorsion & 0xFF);				/* Average distorsion Threshold (intra) */
 				distorsion = 1 + 42 * usbvision->compr_level / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (inter)
-				buffer[5] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (intra)
+				buffer[4] = (unsigned char)(distorsion & 0xFF);				/* Maximum distorsion Threshold (inter) */
+				buffer[5] = (unsigned char)(distorsion & 0xFF);				/* Maximum distorsion Threshold (intra) */
 			}
-			else { //BRIDGE_NT1003
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	// PCM threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	// PCM threshold 2
+			else { /* BRIDGE_NT1003 */
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM threshold 1 */
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM threshold 2 */
 				distorsion = 2 + 253 * usbvision->compr_level / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				// distorsion threshold bit0-7
-				buffer[3] = 0; 	//(unsigned char)((distorsion >> 8) & 0x0F);		// distorsion threshold bit 8-11
+				buffer[2] = (unsigned char)(distorsion & 0xFF);				/* distorsion threshold bit0-7 */
+				buffer[3] = 0; 	/* (unsigned char)((distorsion >> 8) & 0x0F);		distorsion threshold bit 8-11 */
 				distorsion = 0 + 43 * usbvision->compr_level / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				// maximum distorsion bit0-7
-				buffer[5] = 0; //(unsigned char)((distorsion >> 8) & 0x01);		// maximum distorsion bit 8
+				buffer[4] = (unsigned char)(distorsion & 0xFF);				/* maximum distorsion bit0-7 */
+				buffer[5] = 0; /* (unsigned char)((distorsion >> 8) & 0x01);		maximum distorsion bit 8 */
 			}
 			err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
 			if (err_code == 0){
@@ -1778,8 +1778,8 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 		       format);
 		format = ISOC_MODE_YUV420;
 	}
-	value[0] = 0x0A;  //TODO: See the effect of the filter
-	value[1] = format; // Sets the VO_MODE register which follows FILT_CONT
+	value[0] = 0x0A;  /* TODO: See the effect of the filter */
+	value[1] = format; /* Sets the VO_MODE register which follows FILT_CONT */
 	rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 			     USBVISION_OP_CODE,
 			     USB_DIR_OUT | USB_TYPE_VENDOR |
@@ -1840,10 +1840,10 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 
 	/* I'll not rewrite the same values */
 	if ((usb_width != usbvision->curwidth) || (usb_height != usbvision->curheight)) {
-		value[0] = usb_width & 0xff;		//LSB
-		value[1] = (usb_width >> 8) & 0x03;	//MSB
-		value[2] = usb_height & 0xff;		//LSB
-		value[3] = (usb_height >> 8) & 0x03;	//MSB
+		value[0] = usb_width & 0xff;		/* LSB */
+		value[1] = (usb_width >> 8) & 0x03;	/* MSB */
+		value[2] = usb_height & 0xff;		/* LSB */
+		value[3] = (usb_height >> 8) & 0x03;	/* MSB */
 
 		err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 			     USBVISION_OP_CODE,
@@ -1880,7 +1880,7 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 
 	PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop);
 
-	frame_drop = FRAMERATE_MAX; 	// We can allow the maximum here, because dropping is controlled
+	frame_drop = FRAMERATE_MAX; 	/* We can allow the maximum here, because dropping is controlled */
 
 	/* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
 		=> frame_skip = 4;
@@ -1903,7 +1903,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 {
 	int i;
 
-	/*needs to be page aligned cause the buffers can be mapped individually! */
+	/* needs to be page aligned cause the buffers can be mapped individually! */
 	usbvision->max_frame_size =  PAGE_ALIGN(usbvision->curwidth *
 						usbvision->curheight *
 						usbvision->palette.bytes_per_pixel);
@@ -2002,19 +2002,19 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	int rc;
 	unsigned char value[6];
 
-	value[0] = 0x0F;    // Intra-Compression cycle
-	value[1] = 0x01;    // Reg.45 one line per strip
-	value[2] = 0x00;    // Reg.46 Force intra mode on all new frames
-	value[3] = 0x00;    // Reg.47 FORCE_UP <- 0 normal operation (not force)
-	value[4] = 0xA2;    // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode.
-	value[5] = 0x00;    // Reg.49 DVI_YUV This has nothing to do with compression
-
-	//catched values for NT1004
-	// value[0] = 0xFF; // Never apply intra mode automatically
-	// value[1] = 0xF1; // Use full frame height for virtual strip width; One line per strip
-	// value[2] = 0x01; // Force intra mode on all new frames
-	// value[3] = 0x00; // Strip size 400 Bytes; do not force up
-	// value[4] = 0xA2; //
+	value[0] = 0x0F;    /* Intra-Compression cycle */
+	value[1] = 0x01;    /* Reg.45 one line per strip */
+	value[2] = 0x00;    /* Reg.46 Force intra mode on all new frames */
+	value[3] = 0x00;    /* Reg.47 FORCE_UP <- 0 normal operation (not force) */
+	value[4] = 0xA2;    /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */
+	value[5] = 0x00;    /* Reg.49 DVI_YUV This has nothing to do with compression */
+
+	/* catched values for NT1004 */
+	/* value[0] = 0xFF; Never apply intra mode automatically */
+	/* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */
+	/* value[2] = 0x01; Force intra mode on all new frames */
+	/* value[3] = 0x00; Strip size 400 Bytes; do not force up */
+	/* value[4] = 0xA2; */
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
@@ -2031,20 +2031,20 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	}
 
 	if (usbvision->bridge_type == BRIDGE_NT1004) {
-		value[0] =  20; // PCM Threshold 1
-		value[1] =  12; // PCM Threshold 2
-		value[2] = 255; // Distorsion Threshold inter
-		value[3] = 255; // Distorsion Threshold intra
-		value[4] =  43; // Max Distorsion inter
-		value[5] =  43; // Max Distorsion intra
+		value[0] =  20; /* PCM Threshold 1 */
+		value[1] =  12; /* PCM Threshold 2 */
+		value[2] = 255; /* Distorsion Threshold inter */
+		value[3] = 255; /* Distorsion Threshold intra */
+		value[4] =  43; /* Max Distorsion inter */
+		value[5] =  43; /* Max Distorsion intra */
 	}
 	else {
-		value[0] =  20; // PCM Threshold 1
-		value[1] =  12; // PCM Threshold 2
-		value[2] = 255; // Distorsion Threshold d7-d0
-		value[3] =   0; // Distorsion Threshold d11-d8
-		value[4] =  43; // Max Distorsion d7-d0
-		value[5] =   0; // Max Distorsion d8
+		value[0] =  20; /* PCM Threshold 1 */
+		value[1] =  12; /* PCM Threshold 2 */
+		value[2] = 255; /* Distorsion Threshold d7-d0 */
+		value[3] =   0; /* Distorsion Threshold d11-d8 */
+		value[4] =  43; /* Max Distorsion d7-d0 */
+		value[5] =   0; /* Max Distorsion d8 */
 	}
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
@@ -2107,31 +2107,31 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 
 	if (usbvision->tvnorm_id & V4L2_STD_PAL) {
 		value[0] = 0xC0;
-		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
+		value[1] = 0x02;	/* 0x02C0 -> 704 Input video line length */
 		value[2] = 0x20;
-		value[3] = 0x01;	//0x0120 -> 288 Input video n. of lines
+		value[3] = 0x01;	/* 0x0120 -> 288 Input video n. of lines */
 		value[4] = 0x60;
-		value[5] = 0x00;	//0x0060 -> 96 Input video h offset
+		value[5] = 0x00;	/* 0x0060 -> 96 Input video h offset */
 		value[6] = 0x16;
-		value[7] = 0x00;	//0x0016 -> 22 Input video v offset
+		value[7] = 0x00;	/* 0x0016 -> 22 Input video v offset */
 	} else if (usbvision->tvnorm_id & V4L2_STD_SECAM) {
 		value[0] = 0xC0;
-		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
+		value[1] = 0x02;	/* 0x02C0 -> 704 Input video line length */
 		value[2] = 0x20;
-		value[3] = 0x01;	//0x0120 -> 288 Input video n. of lines
+		value[3] = 0x01;	/* 0x0120 -> 288 Input video n. of lines */
 		value[4] = 0x01;
-		value[5] = 0x00;	//0x0001 -> 01 Input video h offset
+		value[5] = 0x00;	/* 0x0001 -> 01 Input video h offset */
 		value[6] = 0x01;
-		value[7] = 0x00;	//0x0001 -> 01 Input video v offset
+		value[7] = 0x00;	/* 0x0001 -> 01 Input video v offset */
 	} else {	/* V4L2_STD_NTSC */
 		value[0] = 0xD0;
-		value[1] = 0x02;	//0x02D0 -> 720 Input video line length
+		value[1] = 0x02;	/* 0x02D0 -> 720 Input video line length */
 		value[2] = 0xF0;
-		value[3] = 0x00;	//0x00F0 -> 240 Input video number of lines
+		value[3] = 0x00;	/* 0x00F0 -> 240 Input video number of lines */
 		value[4] = 0x50;
-		value[5] = 0x00;	//0x0050 -> 80 Input video h offset
+		value[5] = 0x00;	/* 0x0050 -> 80 Input video h offset */
 		value[6] = 0x10;
-		value[7] = 0x00;	//0x0010 -> 16 Input video v offset
+		value[7] = 0x00;	/* 0x0010 -> 16 Input video v offset */
 	}
 
 	if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) {
@@ -2201,9 +2201,9 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 		value[5] = 0xe0;
 		value[6] = 0x71;
 		value[7] = 0xff;
-		// UR:  0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte)
-		// FDL: 0x00000-0x0E099 =  57498 Words
-		// VDW: 0x0E3FF-0x3FFFF
+		/* UR:  0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) */
+		/* FDL: 0x00000-0x0E099 =  57498 Words */
+		/* VDW: 0x0E3FF-0x3FFFF */
 	}
 	else {
 		value[0] = 0x42;
@@ -2285,7 +2285,7 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
  * usbvision timer stuff
  */
 
-// to call usbvision_power_off from task queue
+/* to call usbvision_power_off from task queue */
 static void call_usbvision_power_off(struct work_struct *work)
 {
 	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, power_off_work);
@@ -2592,17 +2592,17 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
 	/* inputs #1 and #2 are variable for SAA7111 and SAA7113 */
 	int mode[4]= {SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3};
 	int audio[]= {1, 0, 0, 0};
-	//channel 0 is TV with audiochannel 1 (tuner mono)
-	//channel 1 is Composite with audio channel 0 (line in)
-	//channel 2 is S-Video with audio channel 0 (line in)
-	//channel 3 is additional video inputs to the device with audio channel 0 (line in)
+	/* channel 0 is TV with audiochannel 1 (tuner mono) */
+	/* channel 1 is Composite with audio channel 0 (line in) */
+	/* channel 2 is S-Video with audio channel 0 (line in) */
+	/* channel 3 is additional video inputs to the device with audio channel 0 (line in) */
 
 	RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs);
 	usbvision->ctl_input = channel;
 
-	// set the new channel
-	// Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
-	// Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
+	/* set the new channel */
+	/* Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video */
+	/* Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red */
 
 	switch (usbvision_device_data[usbvision->dev_model].codec) {
 		case CODEC_SAA7113:
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 7b2cd00bf004..cb19c8448c56 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -39,7 +39,7 @@
 
 static int i2c_debug;
 
-module_param (i2c_debug, int, 0644);			// debug_i2c_usb mode of the device driver
+module_param (i2c_debug, int, 0644);			/* debug_i2c_usb mode of the device driver */
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
 #define PDEBUG(level, fmt, args...) { \
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 4882ea087b92..375355a8fe1c 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -103,7 +103,7 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL)
 #define DBG_PROBE	1<<2
 #define DBG_MMAP	1<<3
 
-//String operations
+/* String operations */
 #define rmspace(str)	while(*str==' ') str++;
 #define goto2next(str)	while(*str!=' ') str++; while(*str==' ') str++;
 
@@ -118,7 +118,7 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
 	{ 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
 	{ 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
 	{ 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
-	{ 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, // 1.5 !
+	{ 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, /* 1.5 ! */
 	{ 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
 };
 
@@ -153,7 +153,7 @@ MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX).  Default: -1
 MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
 
 
-// Misc stuff
+/* Misc stuff */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE(DRIVER_LICENSE);
@@ -534,7 +534,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 	if (usbvision->have_tuner) {
 		chan = vi->index;
 	} else {
-		chan = vi->index + 1; /*skip Television string*/
+		chan = vi->index + 1; /* skip Television string*/
 	}
 	/* Determine the requested input characteristics
 	   specific for each usbvision card model */
@@ -618,7 +618,7 @@ static int vidioc_g_tuner (struct file *file, void *priv,
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	if (!usbvision->have_tuner || vt->index)	// Only tuner 0
+	if (!usbvision->have_tuner || vt->index)	/* Only tuner 0 */
 		return -EINVAL;
 	if(usbvision->radio) {
 		strcpy(vt->name, "Radio");
@@ -637,7 +637,7 @@ static int vidioc_s_tuner (struct file *file, void *priv,
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	// Only no or one tuner for now
+	/* Only no or one tuner for now */
 	if (!usbvision->have_tuner || vt->index)
 		return -EINVAL;
 	/* let clients handle this */
@@ -651,7 +651,7 @@ static int vidioc_g_frequency (struct file *file, void *priv,
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	freq->tuner = 0; // Only one tuner
+	freq->tuner = 0; /* Only one tuner */
 	if(usbvision->radio) {
 		freq->type = V4L2_TUNER_RADIO;
 	} else {
@@ -667,7 +667,7 @@ static int vidioc_s_frequency (struct file *file, void *priv,
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	// Only no or one tuner for now
+	/* Only no or one tuner for now */
 	if (!usbvision->have_tuner || freq->tuner)
 		return -EINVAL;
 
@@ -1069,7 +1069,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	       (unsigned long)count, frame->bytes_read);
 
 	/* For now, forget the frame if it has not been read in one shot. */
-/* 	if (frame->bytes_read >= frame->scanlength) {// All data has been read */
+/* 	if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */
 		frame->bytes_read = 0;
 
 		/* Mark it as available to be used again. */
@@ -1163,7 +1163,7 @@ static int usbvision_radio_open(struct file *file)
 			goto out;
 		}
 
-		// If so far no errors then we shall start the radio
+		/* If so far no errors then we shall start the radio */
 		usbvision->radio = 1;
 		call_all(usbvision, tuner, s_radio);
 		usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO);
@@ -1212,11 +1212,9 @@ static int usbvision_radio_close(struct file *file)
 	return err_code;
 }
 
-//
-// Video registration stuff
-//
+/* Video registration stuff */
 
-// Video template
+/* Video template */
 static const struct v4l2_file_operations usbvision_fops = {
 	.owner             = THIS_MODULE,
 	.open		= usbvision_v4l2_open,
@@ -1268,7 +1266,7 @@ static struct video_device usbvision_video_template = {
 };
 
 
-// Radio template
+/* Radio template */
 static const struct v4l2_file_operations usbvision_radio_fops = {
 	.owner             = THIS_MODULE,
 	.open		= usbvision_radio_open,
@@ -1328,10 +1326,10 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
 	return vdev;
 }
 
-// unregister video4linux devices
+/* unregister video4linux devices */
 static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 {
-	// Radio Device:
+	/* Radio Device: */
 	if (usbvision->rdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->rdev));
@@ -1343,7 +1341,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 		usbvision->rdev = NULL;
 	}
 
-	// Video Device:
+	/* Video Device: */
 	if (usbvision->vdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->vdev));
@@ -1356,10 +1354,10 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	}
 }
 
-// register video4linux devices
+/* register video4linux devices */
 static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 {
-	// Video Device:
+	/* Video Device: */
 	usbvision->vdev = usbvision_vdev_init(usbvision,
 					      &usbvision_video_template,
 					      "USBVision Video");
@@ -1374,9 +1372,9 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 	printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
 	       usbvision->nr, video_device_node_name(usbvision->vdev));
 
-	// Radio Device:
+	/* Radio Device: */
 	if (usbvision_device_data[usbvision->dev_model].radio) {
-		// usbvision has radio
+		/* usbvision has radio */
 		usbvision->rdev = usbvision_vdev_init(usbvision,
 						      &usbvision_radio_template,
 						      "USBVision Radio");
@@ -1391,7 +1389,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 		printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
 		       usbvision->nr, video_device_node_name(usbvision->rdev));
 	}
-	// all done
+	/* all done */
 	return 0;
 
  err_exit:
@@ -1426,7 +1424,7 @@ static struct usb_usbvision *usbvision_alloc(struct usb_device *dev,
 
 	mutex_init(&usbvision->v4l2_lock);
 
-	// prepare control urb for control messages during interrupts
+	/* prepare control urb for control messages during interrupts */
 	usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
 	if (usbvision->ctrl_urb == NULL)
 		goto err_unreg;
@@ -1482,7 +1480,7 @@ static void usbvision_configure_video(struct usb_usbvision *usbvision)
 		return;
 
 	model = usbvision->dev_model;
-	usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
+	usbvision->palette = usbvision_v4l2_format[2]; /* V4L2_PIX_FMT_RGB24; */
 
 	if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) {
 		usbvision->vin_reg2_preset =
@@ -1639,7 +1637,7 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 
 	mutex_lock(&usbvision->v4l2_lock);
 
-	// At this time we ask to cancel outstanding URBs
+	/* At this time we ask to cancel outstanding URBs */
 	usbvision_stop_isoc(usbvision);
 
 	v4l2_device_disconnect(&usbvision->v4l2_dev);
@@ -1648,10 +1646,10 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 		usbvision_i2c_unregister(usbvision);
 		usbvision_power_off(usbvision);
 	}
-	usbvision->remove_pending = 1;	// Now all ISO data will be ignored
+	usbvision->remove_pending = 1;	/* Now all ISO data will be ignored */
 
 	usb_put_dev(usbvision->dev);
-	usbvision->dev = NULL;	// USB device is no more
+	usbvision->dev = NULL;	/* USB device is no more */
 
 	mutex_unlock(&usbvision->v4l2_lock);
 
@@ -1692,9 +1690,9 @@ static int __init usbvision_init(void)
 
 	/* disable planar mode support unless compression enabled */
 	if (isoc_mode != ISOC_MODE_COMPRESS ) {
-		// FIXME : not the right way to set supported flag
-		usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
-		usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
+		/* FIXME : not the right way to set supported flag */
+		usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */
+		usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */
 	}
 
 	err_code = usb_register(&usbvision_driver);
diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h
index 42189e500143..514115930b4a 100644
--- a/drivers/media/video/usbvision/usbvision.h
+++ b/drivers/media/video/usbvision/usbvision.h
@@ -132,15 +132,15 @@
 #define MAX_BYTES_PER_PIXEL		4
 
 #define MIN_FRAME_WIDTH			64
-#define MAX_USB_WIDTH			320  //384
-#define MAX_FRAME_WIDTH			320  //384			/*streching sometimes causes crashes*/
+#define MAX_USB_WIDTH			320  /* 384 */
+#define MAX_FRAME_WIDTH			320  /* 384 */			/* streching sometimes causes crashes*/
 
 #define MIN_FRAME_HEIGHT		48
-#define MAX_USB_HEIGHT			240  //288
-#define MAX_FRAME_HEIGHT		240  //288			/*Streching sometimes causes crashes*/
+#define MAX_USB_HEIGHT			240  /* 288 */
+#define MAX_FRAME_HEIGHT		240  /* 288 */			/* Streching sometimes causes crashes*/
 
 #define MAX_FRAME_SIZE     		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
-#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) //bytesize of clipmask
+#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */
 
 #define USBVISION_URB_FRAMES		32
 
@@ -148,7 +148,7 @@
 #define USBVISION_NUMFRAMES		3  /* Maximum number of frames an application can get */
 #define USBVISION_NUMSBUF		2 /* Dimensioning the USB S buffering */
 
-#define USBVISION_POWEROFF_TIME		3 * (HZ)		// 3 seconds
+#define USBVISION_POWEROFF_TIME		3 * (HZ)		/* 3 seconds */
 
 
 #define FRAMERATE_MIN	0
@@ -287,7 +287,7 @@ struct usbvision_frame_header {
 	unsigned char magic_1;				/* 0 magic */
 	unsigned char magic_2;				/* 1  magic */
 	unsigned char header_length;			/* 2 */
-	unsigned char frame_num;				/* 3 */
+	unsigned char frame_num;			/* 3 */
 	unsigned char frame_phase;			/* 4 */
 	unsigned char frame_latency;			/* 5 */
 	unsigned char data_format;			/* 6 */
@@ -322,7 +322,7 @@ struct usbvision_frame {
 	struct usbvision_v4l2_format_st v4l2_format;	/* format the user needs*/
 	int v4l2_linesize;				/* bytes for one videoline*/
 	struct timeval timestamp;
-	int sequence;					// How many video frames we send to user
+	int sequence;					/* How many video frames we send to user */
 };
 
 #define CODEC_SAA7113	7113
@@ -369,19 +369,19 @@ struct usb_usbvision {
 	unsigned char ctrl_urb_buffer[8];
 	int ctrl_urb_busy;
 	struct usb_ctrlrequest ctrl_urb_setup;
-	wait_queue_head_t ctrl_urb_wq;					// Processes waiting
+	wait_queue_head_t ctrl_urb_wq;					/* Processes waiting */
 
 	/* configuration part */
 	int have_tuner;
 	int tuner_type;
-	int bridge_type;							// NT1003, NT1004, NT1005
+	int bridge_type;						/* NT1003, NT1004, NT1005 */
 	int radio;
-	int video_inputs;						// # of inputs
+	int video_inputs;						/* # of inputs */
 	unsigned long freq;
 	int audio_mute;
 	int audio_channel;
-	int isoc_mode;							// format of video data for the usb isoc-transfer
-	unsigned int nr;						// Number of the device
+	int isoc_mode;							/* format of video data for the usb isoc-transfer */
+	unsigned int nr;						/* Number of the device */
 
 	/* Device structure */
 	struct usb_device *dev;
@@ -389,7 +389,7 @@ struct usb_usbvision {
 	int num_alt;		/* Number of alternative settings */
 	unsigned int *alt_max_pkt_size;	/* array of max_packet_size */
 	unsigned char iface;						/* Video interface number */
-	unsigned char iface_alt;			/* Alt settings */
+	unsigned char iface_alt;					/* Alt settings */
 	unsigned char vin_reg2_preset;
 	struct mutex v4l2_lock;
 	struct timer_list power_off_timer;
@@ -411,10 +411,10 @@ struct usb_usbvision {
 	struct list_head inqueue, outqueue;                             /* queued frame list and ready to dequeue frame list */
 	wait_queue_head_t wait_frame;					/* Processes waiting */
 	wait_queue_head_t wait_stream;					/* Processes waiting */
-	struct usbvision_frame *cur_frame;				// pointer to current frame, set by usbvision_find_header
-	struct usbvision_frame frame[USBVISION_NUMFRAMES];		// frame buffer
-	int num_frames;							// number of frames allocated
-	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			// S buffering
+	struct usbvision_frame *cur_frame;				/* pointer to current frame, set by usbvision_find_header */
+	struct usbvision_frame frame[USBVISION_NUMFRAMES];		/* frame buffer */
+	int num_frames;							/* number of frames allocated */
+	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			/* S buffering */
 	volatile int remove_pending;					/* If set then about to exit */
 
 	/* Scratch space from the Isochronous Pipe.*/
@@ -432,32 +432,32 @@ struct usb_usbvision {
 	v4l2_std_id tvnorm_id;						/* selected tv norm */
 	unsigned char video_endp;					/* 0x82 for USBVISION devices based */
 
-	// Decompression stuff:
+	/* Decompression stuff: */
 	unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
-	int block_pos; 							//for test only
-	int request_intra;						// 0 = normal; 1 = intra frame is requested;
-	int last_isoc_frame_num;						// check for lost isoc frames
-	int isoc_packet_size;						// need to calculate used_bandwidth
-	int used_bandwidth;						// used bandwidth 0-100%, need to set compr_level
-	int compr_level;							// How strong (100) or weak (0) is compression
-	int last_compr_level;						// How strong (100) or weak (0) was compression
+	int block_pos; 							/* for test only */
+	int request_intra;						/* 0 = normal; 1 = intra frame is requested; */
+	int last_isoc_frame_num;					/* check for lost isoc frames */
+	int isoc_packet_size;						/* need to calculate used_bandwidth */
+	int used_bandwidth;						/* used bandwidth 0-100%, need to set compr_level */
+	int compr_level;						/* How strong (100) or weak (0) is compression */
+	int last_compr_level;						/* How strong (100) or weak (0) was compression */
 	int usb_bandwidth;						/* Mbit/s */
 
 	/* Statistics that can be overlayed on the screen */
-	unsigned long isoc_urb_count;			// How many URBs we received so far
+	unsigned long isoc_urb_count;			/* How many URBs we received so far */
 	unsigned long urb_length;			/* Length of last URB */
 	unsigned long isoc_data_count;			/* How many bytes we received */
 	unsigned long header_count;			/* How many frame headers we found */
 	unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
 	unsigned long isoc_skip_count;			/* How many empty ISO packets received */
 	unsigned long isoc_err_count;			/* How many bad ISO packets received */
-	unsigned long isoc_packet_count;			// How many packets we totally got
-	unsigned long time_in_irq;			// How long do we need for interrupt
+	unsigned long isoc_packet_count;		/* How many packets we totally got */
+	unsigned long time_in_irq;			/* How long do we need for interrupt */
 	int isoc_measure_bandwidth_count;
-	int frame_num;					// How many video frames we send to user
-	int max_strip_len;				// How big is the biggest strip
+	int frame_num;					/* How many video frames we send to user */
+	int max_strip_len;				/* How big is the biggest strip */
 	int comprblock_pos;
-	int strip_len_errors;				// How many times was block_pos greater than strip_len
+	int strip_len_errors;				/* How many times was block_pos greater than strip_len */
 	int strip_magic_errors;
 	int strip_line_number_errors;
 	int compr_block_types[4];
-- 
cgit v1.2.3


From 6d6a48e51fd3bcb40c5b88d0f9690ba960eedfd2 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 13:53:21 -0300
Subject: [media] usbvision: coding style

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/usbvision/usbvision-cards.c | 132 ++---
 drivers/media/video/usbvision/usbvision-core.c  | 695 ++++++++++--------------
 drivers/media/video/usbvision/usbvision-i2c.c   |  41 +-
 drivers/media/video/usbvision/usbvision-video.c | 328 +++++------
 drivers/media/video/usbvision/usbvision.h       |  47 +-
 5 files changed, 557 insertions(+), 686 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c
index acfdb2bc7917..68b998bd203f 100644
--- a/drivers/media/video/usbvision/usbvision-cards.c
+++ b/drivers/media/video/usbvision/usbvision-cards.c
@@ -1026,78 +1026,78 @@ struct usbvision_device_data_st  usbvision_device_data[] = {
 		.model_string   = "Hauppauge WinTv-USB",
 	},
 };
-const int usbvision_device_data_size=ARRAY_SIZE(usbvision_device_data);
+const int usbvision_device_data_size = ARRAY_SIZE(usbvision_device_data);
 
 /* Supported Devices */
 
-struct usb_device_id usbvision_table [] = {
-	{ USB_DEVICE(0x0a6f, 0x0400), .driver_info=XANBOO },
-	{ USB_DEVICE(0x050d, 0x0106), .driver_info=BELKIN_VIDEOBUS_II },
-	{ USB_DEVICE(0x050d, 0x0207), .driver_info=BELKIN_VIDEOBUS },
-	{ USB_DEVICE(0x050d, 0x0208), .driver_info=BELKIN_USB_VIDEOBUS_II },
-	{ USB_DEVICE(0x0571, 0x0002), .driver_info=ECHOFX_INTERVIEW_LITE },
-	{ USB_DEVICE(0x0573, 0x0003), .driver_info=USBGEAR_USBG_V1 },
-	{ USB_DEVICE(0x0573, 0x0400), .driver_info=D_LINK_V100 },
-	{ USB_DEVICE(0x0573, 0x2000), .driver_info=X10_USB_CAMERA },
-	{ USB_DEVICE(0x0573, 0x2d00), .driver_info=HPG_WINTV_LIVE_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x2d01), .driver_info=HPG_WINTV_LIVE_PRO_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x2101), .driver_info=ZORAN_PMD_NOGATECH },
-	{ USB_DEVICE(0x0573, 0x4100), .driver_info=NOGATECH_USB_TV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4110), .driver_info=PNY_USB_TV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4450), .driver_info=PV_PLAYTV_USB_PRO_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4550), .driver_info=ZT_721 },
-	{ USB_DEVICE(0x0573, 0x4d00), .driver_info=HPG_WINTV_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x4d01), .driver_info=HPG_WINTV_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x4d02), .driver_info=HPG_WINTV_PAL_I },
-	{ USB_DEVICE(0x0573, 0x4d03), .driver_info=HPG_WINTV_PAL_SECAM_L },
-	{ USB_DEVICE(0x0573, 0x4d04), .driver_info=HPG_WINTV_PAL_D_K },
-	{ USB_DEVICE(0x0573, 0x4d10), .driver_info=HPG_WINTV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4d11), .driver_info=HPG_WINTV_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d12), .driver_info=HPG_WINTV_PAL_I_FM },
-	{ USB_DEVICE(0x0573, 0x4d14), .driver_info=HPG_WINTV_PAL_D_K_FM },
-	{ USB_DEVICE(0x0573, 0x4d2a), .driver_info=HPG_WINTV_PRO_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x4d2b), .driver_info=HPG_WINTV_PRO_NTSC_MN_V2 },
-	{ USB_DEVICE(0x0573, 0x4d2c), .driver_info=HPG_WINTV_PRO_PAL },
+struct usb_device_id usbvision_table[] = {
+	{ USB_DEVICE(0x0a6f, 0x0400), .driver_info = XANBOO },
+	{ USB_DEVICE(0x050d, 0x0106), .driver_info = BELKIN_VIDEOBUS_II },
+	{ USB_DEVICE(0x050d, 0x0207), .driver_info = BELKIN_VIDEOBUS },
+	{ USB_DEVICE(0x050d, 0x0208), .driver_info = BELKIN_USB_VIDEOBUS_II },
+	{ USB_DEVICE(0x0571, 0x0002), .driver_info = ECHOFX_INTERVIEW_LITE },
+	{ USB_DEVICE(0x0573, 0x0003), .driver_info = USBGEAR_USBG_V1 },
+	{ USB_DEVICE(0x0573, 0x0400), .driver_info = D_LINK_V100 },
+	{ USB_DEVICE(0x0573, 0x2000), .driver_info = X10_USB_CAMERA },
+	{ USB_DEVICE(0x0573, 0x2d00), .driver_info = HPG_WINTV_LIVE_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x2d01), .driver_info = HPG_WINTV_LIVE_PRO_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x2101), .driver_info = ZORAN_PMD_NOGATECH },
+	{ USB_DEVICE(0x0573, 0x4100), .driver_info = NOGATECH_USB_TV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4110), .driver_info = PNY_USB_TV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4450), .driver_info = PV_PLAYTV_USB_PRO_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4550), .driver_info = ZT_721 },
+	{ USB_DEVICE(0x0573, 0x4d00), .driver_info = HPG_WINTV_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x4d01), .driver_info = HPG_WINTV_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x4d02), .driver_info = HPG_WINTV_PAL_I },
+	{ USB_DEVICE(0x0573, 0x4d03), .driver_info = HPG_WINTV_PAL_SECAM_L },
+	{ USB_DEVICE(0x0573, 0x4d04), .driver_info = HPG_WINTV_PAL_D_K },
+	{ USB_DEVICE(0x0573, 0x4d10), .driver_info = HPG_WINTV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4d11), .driver_info = HPG_WINTV_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d12), .driver_info = HPG_WINTV_PAL_I_FM },
+	{ USB_DEVICE(0x0573, 0x4d14), .driver_info = HPG_WINTV_PAL_D_K_FM },
+	{ USB_DEVICE(0x0573, 0x4d2a), .driver_info = HPG_WINTV_PRO_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x4d2b), .driver_info = HPG_WINTV_PRO_NTSC_MN_V2 },
+	{ USB_DEVICE(0x0573, 0x4d2c), .driver_info = HPG_WINTV_PRO_PAL },
 	{ USB_DEVICE(0x0573, 0x4d20), .driver_info = HPG_WINTV_PRO_NTSC_MN_V3 },
-	{ USB_DEVICE(0x0573, 0x4d21), .driver_info=HPG_WINTV_PRO_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x4d22), .driver_info=HPG_WINTV_PRO_PAL_I },
-	{ USB_DEVICE(0x0573, 0x4d23), .driver_info=HPG_WINTV_PRO_PAL_SECAM_L },
-	{ USB_DEVICE(0x0573, 0x4d24), .driver_info=HPG_WINTV_PRO_PAL_D_K },
-	{ USB_DEVICE(0x0573, 0x4d25), .driver_info=HPG_WINTV_PRO_PAL_SECAM },
-	{ USB_DEVICE(0x0573, 0x4d26), .driver_info=HPG_WINTV_PRO_PAL_SECAM_V2 },
-	{ USB_DEVICE(0x0573, 0x4d27), .driver_info=HPG_WINTV_PRO_PAL_BG_V2 },
-	{ USB_DEVICE(0x0573, 0x4d28), .driver_info=HPG_WINTV_PRO_PAL_BG_D_K },
-	{ USB_DEVICE(0x0573, 0x4d29), .driver_info=HPG_WINTV_PRO_PAL_I_D_K },
-	{ USB_DEVICE(0x0573, 0x4d30), .driver_info=HPG_WINTV_PRO_NTSC_MN_FM },
-	{ USB_DEVICE(0x0573, 0x4d31), .driver_info=HPG_WINTV_PRO_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d32), .driver_info=HPG_WINTV_PRO_PAL_I_FM },
-	{ USB_DEVICE(0x0573, 0x4d34), .driver_info=HPG_WINTV_PRO_PAL_D_K_FM },
-	{ USB_DEVICE(0x0573, 0x4d35), .driver_info=HPG_WINTV_PRO_TEMIC_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4d36), .driver_info=HPG_WINTV_PRO_TEMIC_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d37), .driver_info=HPG_WINTV_PRO_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4d38), .driver_info=HPG_WINTV_PRO_NTSC_MN_FM_V2 },
-	{ USB_DEVICE(0x0768, 0x0006), .driver_info=CAMTEL_TVB330 },
-	{ USB_DEVICE(0x07d0, 0x0001), .driver_info=DIGITAL_VIDEO_CREATOR_I },
-	{ USB_DEVICE(0x07d0, 0x0002), .driver_info=GLOBAL_VILLAGE_GV_007_NTSC },
-	{ USB_DEVICE(0x07d0, 0x0003), .driver_info=DAZZLE_DVC_50_REV_1_NTSC },
-	{ USB_DEVICE(0x07d0, 0x0004), .driver_info=DAZZLE_DVC_80_REV_1_PAL },
-	{ USB_DEVICE(0x07d0, 0x0005), .driver_info=DAZZLE_DVC_90_REV_1_SECAM },
-	{ USB_DEVICE(0x07f8, 0x9104), .driver_info=ESKAPE_LABS_MYTV2GO },
-	{ USB_DEVICE(0x2304, 0x010d), .driver_info=PINNA_PCTV_USB_PAL },
-	{ USB_DEVICE(0x2304, 0x0109), .driver_info=PINNA_PCTV_USB_SECAM },
-	{ USB_DEVICE(0x2304, 0x0110), .driver_info=PINNA_PCTV_USB_PAL_FM },
-	{ USB_DEVICE(0x2304, 0x0111), .driver_info=MIRO_PCTV_USB },
-	{ USB_DEVICE(0x2304, 0x0112), .driver_info=PINNA_PCTV_USB_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4d21), .driver_info = HPG_WINTV_PRO_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x4d22), .driver_info = HPG_WINTV_PRO_PAL_I },
+	{ USB_DEVICE(0x0573, 0x4d23), .driver_info = HPG_WINTV_PRO_PAL_SECAM_L },
+	{ USB_DEVICE(0x0573, 0x4d24), .driver_info = HPG_WINTV_PRO_PAL_D_K },
+	{ USB_DEVICE(0x0573, 0x4d25), .driver_info = HPG_WINTV_PRO_PAL_SECAM },
+	{ USB_DEVICE(0x0573, 0x4d26), .driver_info = HPG_WINTV_PRO_PAL_SECAM_V2 },
+	{ USB_DEVICE(0x0573, 0x4d27), .driver_info = HPG_WINTV_PRO_PAL_BG_V2 },
+	{ USB_DEVICE(0x0573, 0x4d28), .driver_info = HPG_WINTV_PRO_PAL_BG_D_K },
+	{ USB_DEVICE(0x0573, 0x4d29), .driver_info = HPG_WINTV_PRO_PAL_I_D_K },
+	{ USB_DEVICE(0x0573, 0x4d30), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM },
+	{ USB_DEVICE(0x0573, 0x4d31), .driver_info = HPG_WINTV_PRO_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d32), .driver_info = HPG_WINTV_PRO_PAL_I_FM },
+	{ USB_DEVICE(0x0573, 0x4d34), .driver_info = HPG_WINTV_PRO_PAL_D_K_FM },
+	{ USB_DEVICE(0x0573, 0x4d35), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4d36), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d37), .driver_info = HPG_WINTV_PRO_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4d38), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM_V2 },
+	{ USB_DEVICE(0x0768, 0x0006), .driver_info = CAMTEL_TVB330 },
+	{ USB_DEVICE(0x07d0, 0x0001), .driver_info = DIGITAL_VIDEO_CREATOR_I },
+	{ USB_DEVICE(0x07d0, 0x0002), .driver_info = GLOBAL_VILLAGE_GV_007_NTSC },
+	{ USB_DEVICE(0x07d0, 0x0003), .driver_info = DAZZLE_DVC_50_REV_1_NTSC },
+	{ USB_DEVICE(0x07d0, 0x0004), .driver_info = DAZZLE_DVC_80_REV_1_PAL },
+	{ USB_DEVICE(0x07d0, 0x0005), .driver_info = DAZZLE_DVC_90_REV_1_SECAM },
+	{ USB_DEVICE(0x07f8, 0x9104), .driver_info = ESKAPE_LABS_MYTV2GO },
+	{ USB_DEVICE(0x2304, 0x010d), .driver_info = PINNA_PCTV_USB_PAL },
+	{ USB_DEVICE(0x2304, 0x0109), .driver_info = PINNA_PCTV_USB_SECAM },
+	{ USB_DEVICE(0x2304, 0x0110), .driver_info = PINNA_PCTV_USB_PAL_FM },
+	{ USB_DEVICE(0x2304, 0x0111), .driver_info = MIRO_PCTV_USB },
+	{ USB_DEVICE(0x2304, 0x0112), .driver_info = PINNA_PCTV_USB_NTSC_FM },
 	{ USB_DEVICE(0x2304, 0x0113),
 	  .driver_info = PINNA_PCTV_USB_NTSC_FM_V3 },
-	{ USB_DEVICE(0x2304, 0x0210), .driver_info=PINNA_PCTV_USB_PAL_FM_V2 },
-	{ USB_DEVICE(0x2304, 0x0212), .driver_info=PINNA_PCTV_USB_NTSC_FM_V2 },
-	{ USB_DEVICE(0x2304, 0x0214), .driver_info=PINNA_PCTV_USB_PAL_FM_V3 },
-	{ USB_DEVICE(0x2304, 0x0300), .driver_info=PINNA_LINX_VD_IN_CAB_NTSC },
-	{ USB_DEVICE(0x2304, 0x0301), .driver_info=PINNA_LINX_VD_IN_CAB_PAL },
-	{ USB_DEVICE(0x2304, 0x0419), .driver_info=PINNA_PCTV_BUNGEE_PAL_FM },
-	{ USB_DEVICE(0x2400, 0x4200), .driver_info=HPG_WINTV },
+	{ USB_DEVICE(0x2304, 0x0210), .driver_info = PINNA_PCTV_USB_PAL_FM_V2 },
+	{ USB_DEVICE(0x2304, 0x0212), .driver_info = PINNA_PCTV_USB_NTSC_FM_V2 },
+	{ USB_DEVICE(0x2304, 0x0214), .driver_info = PINNA_PCTV_USB_PAL_FM_V3 },
+	{ USB_DEVICE(0x2304, 0x0300), .driver_info = PINNA_LINX_VD_IN_CAB_NTSC },
+	{ USB_DEVICE(0x2304, 0x0301), .driver_info = PINNA_LINX_VD_IN_CAB_PAL },
+	{ USB_DEVICE(0x2304, 0x0419), .driver_info = PINNA_PCTV_BUNGEE_PAL_FM },
+	{ USB_DEVICE(0x2400, 0x4200), .driver_info = HPG_WINTV },
 	{ },    /* terminate list */
 };
 
-MODULE_DEVICE_TABLE (usb, usbvision_table);
+MODULE_DEVICE_TABLE(usb, usbvision_table);
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index 64a913323181..c8feb0d6fccf 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -33,7 +33,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
@@ -46,12 +46,12 @@
 #include "usbvision.h"
 
 static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
 
 static unsigned int force_testpattern;
-module_param(force_testpattern,int,0644);
-MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]");
+module_param(force_testpattern, int, 0644);
+MODULE_PARM_DESC(force_testpattern, "enable test pattern display [core]");
 
 static int adjust_compression = 1;	/* Set the compression to be adaptive */
 module_param(adjust_compression, int, 0444);
@@ -82,15 +82,15 @@ MODULE_PARM_DESC(adjust_y_offset, "adjust Y offset display [core]");
 				__func__, __LINE__ , ## args); \
 	}
 #else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
+	#define PDEBUG(level, fmt, args...) do {} while (0)
 #endif
 
-#define DBG_HEADER	1<<0
-#define DBG_IRQ		1<<1
-#define DBG_ISOC	1<<2
-#define DBG_PARSE	1<<3
-#define DBG_SCRATCH	1<<4
-#define DBG_FUNC	1<<5
+#define DBG_HEADER	(1 << 0)
+#define DBG_IRQ		(1 << 1)
+#define DBG_ISOC	(1 << 2)
+#define DBG_PARSE	(1 << 3)
+#define DBG_SCRATCH	(1 << 4)
+#define DBG_FUNC	(1 << 5)
 
 static const int max_imgwidth = MAX_FRAME_WIDTH;
 static const int max_imgheight = MAX_FRAME_HEIGHT;
@@ -107,10 +107,10 @@ static const int min_imgheight = MIN_FRAME_HEIGHT;
 static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
 
 /* Function prototypes */
-static int usbvision_request_intra (struct usb_usbvision *usbvision);
-static int usbvision_unrequest_intra (struct usb_usbvision *usbvision);
-static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
-static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision);
+static int usbvision_request_intra(struct usb_usbvision *usbvision);
+static int usbvision_unrequest_intra(struct usb_usbvision *usbvision);
+static int usbvision_adjust_compression(struct usb_usbvision *usbvision);
+static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision);
 
 /*******************************/
 /* Memory management functions */
@@ -176,7 +176,7 @@ static void usbvision_hexdump(const unsigned char *data, int len)
 		k += sprintf(&tmp[k], "%02x ", data[i]);
 	}
 	if (k > 0)
-		printk("%s\n", tmp);
+		printk(KERN_CONT "%s\n", tmp);
 }
 #endif
 
@@ -186,9 +186,9 @@ static void usbvision_hexdump(const unsigned char *data, int len)
 static int scratch_len(struct usb_usbvision *usbvision)    /* This returns the amount of data actually in the buffer */
 {
 	int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr;
-	if (len < 0) {
+
+	if (len < 0)
 		len += scratch_buf_size;
-	}
 	PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len);
 
 	return len;
@@ -199,9 +199,8 @@ static int scratch_len(struct usb_usbvision *usbvision)    /* This returns the a
 static int scratch_free(struct usb_usbvision *usbvision)
 {
 	int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr;
-	if (free <= 0) {
+	if (free <= 0)
 		free += scratch_buf_size;
-	}
 	if (free) {
 		free -= 1;							/* at least one byte in the buffer must */
 										/* left blank, otherwise there is no chance to differ between full and empty */
@@ -221,14 +220,12 @@ static int scratch_put(struct usb_usbvision *usbvision, unsigned char *data,
 	if (usbvision->scratch_write_ptr + len < scratch_buf_size) {
 		memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len);
 		usbvision->scratch_write_ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - usbvision->scratch_write_ptr;
 		memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part);
 		if (len == len_part) {
 			usbvision->scratch_write_ptr = 0;			/* just set write_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(usbvision->scratch, data + len_part, len - len_part);
 			usbvision->scratch_write_ptr = len - len_part;
 		}
@@ -255,17 +252,16 @@ static int scratch_get_extra(struct usb_usbvision *usbvision,
 			     unsigned char *data, int *ptr, int len)
 {
 	int len_part;
+
 	if (*ptr + len < scratch_buf_size) {
 		memcpy(data, usbvision->scratch + *ptr, len);
 		*ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - *ptr;
 		memcpy(data, usbvision->scratch + *ptr, len_part);
 		if (len == len_part) {
 			*ptr = 0;							/* just set the y_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(data + len_part, usbvision->scratch, len - len_part);
 			*ptr = len - len_part;
 		}
@@ -281,7 +277,7 @@ static int scratch_get_extra(struct usb_usbvision *usbvision,
 static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr,
 				  int len)
 {
-	*ptr = (usbvision->scratch_read_ptr + len)%scratch_buf_size;
+	*ptr = (usbvision->scratch_read_ptr + len) % scratch_buf_size;
 
 	PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr);
 }
@@ -301,17 +297,16 @@ static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data,
 		       int len)
 {
 	int len_part;
+
 	if (usbvision->scratch_read_ptr + len < scratch_buf_size) {
 		memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len);
 		usbvision->scratch_read_ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - usbvision->scratch_read_ptr;
 		memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part);
 		if (len == len_part) {
 			usbvision->scratch_read_ptr = 0;				/* just set the read_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(data + len_part, usbvision->scratch, len - len_part);
 			usbvision->scratch_read_ptr = len - len_part;
 		}
@@ -355,7 +350,6 @@ static int scratch_get_header(struct usb_usbvision *usbvision,
 /* This removes len bytes of old data from the buffer */
 static void scratch_rm_old(struct usb_usbvision *usbvision, int len)
 {
-
 	usbvision->scratch_read_ptr += len;
 	usbvision->scratch_read_ptr %= scratch_buf_size;
 	PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr);
@@ -378,7 +372,7 @@ int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
 {
 	usbvision->scratch = vmalloc_32(scratch_buf_size);
 	scratch_reset(usbvision);
-	if(usbvision->scratch == NULL) {
+	if (usbvision->scratch == NULL) {
 		dev_err(&usbvision->dev->dev,
 			"%s: unable to allocate %d bytes for scratch\n",
 				__func__, scratch_buf_size);
@@ -391,7 +385,6 @@ void usbvision_scratch_free(struct usb_usbvision *usbvision)
 {
 	vfree(usbvision->scratch);
 	usbvision->scratch = NULL;
-
 }
 
 /*
@@ -476,7 +469,6 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 	frame->grabstate = frame_state_done;
 	frame->scanlength += scan_length;
 	++num_pass;
-
 }
 
 /*
@@ -487,6 +479,7 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
 {
 	int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2;
+
 	usbvision->intra_frame_buffer = vmalloc_32(IFB_size);
 	if (usbvision->intra_frame_buffer == NULL) {
 		dev_err(&usbvision->dev->dev,
@@ -545,8 +538,7 @@ static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 				usbvision_unrequest_intra(usbvision);
 				break;
 			}
-		}
-		else {
+		} else {
 			found_header = 1;
 			break;
 		}
@@ -555,16 +547,15 @@ static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 	if (found_header) {
 		frame->frmwidth = frame->isoc_header.frame_width * usbvision->stretch_width;
 		frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height;
-		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3;
-	}
-	else { /* no header found */
+		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth) >> 3;
+	} else { /* no header found */
 		PDEBUG(DBG_HEADER, "skipping scratch data, no header");
 		scratch_reset(usbvision);
 		return parse_state_end_parse;
 	}
 
 	/* found header */
-	if (frame->isoc_header.data_format==ISOC_MODE_COMPRESS) {
+	if (frame->isoc_header.data_format == ISOC_MODE_COMPRESS) {
 		/* check isoc_header.frame_num for lost frames */
 		if (usbvision->last_isoc_frame_num >= 0) {
 			if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) {
@@ -594,7 +585,7 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 	unsigned char *f;
 	int len;
 	int i;
-	unsigned char yuyv[4]={180, 128, 10, 128}; /* YUV components */
+	unsigned char yuyv[4] = { 180, 128, 10, 128 }; /* YUV components */
 	unsigned char rv, gv, bv;	/* RGB components */
 	int clipmask_index, bytes_per_pixel;
 	int stretch_bytes, clipmask_add;
@@ -603,31 +594,27 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 	f = frame->data + (frame->v4l2_linesize * frame->curline);
 
 	/* Make sure there's enough data for the entire line */
-	len = (frame->isoc_header.frame_width * 2)+5;
+	len = (frame->isoc_header.frame_width * 2) + 5;
 	if (scratch_len(usbvision) < len) {
 		PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len);
 		return parse_state_out;
 	}
 
-	if ((frame->curline + 1) >= frame->frmheight) {
+	if ((frame->curline + 1) >= frame->frmheight)
 		return parse_state_next_frame;
-	}
 
 	bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
 	stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
 	clipmask_index = frame->curline * MAX_FRAME_WIDTH;
 	clipmask_add = usbvision->stretch_width;
 
-	for (i = 0; i < frame->frmwidth; i+=(2 * usbvision->stretch_width)) {
-
+	for (i = 0; i < frame->frmwidth; i += (2 * usbvision->stretch_width)) {
 		scratch_get(usbvision, &yuyv[0], 4);
 
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 			*f++ = yuyv[0]; /* Y */
 			*f++ = yuyv[3]; /* U */
-		}
-		else {
-
+		} else {
 			YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
 			case V4L2_PIX_FMT_RGB565:
@@ -661,9 +648,7 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 			*f++ = yuyv[2]; /* Y */
 			*f++ = yuyv[1]; /* V */
-		}
-		else {
-
+		} else {
 			YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
 			case V4L2_PIX_FMT_RGB565:
@@ -698,16 +683,13 @@ static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvisio
 	frame->curline += usbvision->stretch_height;
 	*pcopylen += frame->v4l2_linesize * usbvision->stretch_height;
 
-	if (frame->curline >= frame->frmheight) {
+	if (frame->curline >= frame->frmheight)
 		return parse_state_next_frame;
-	}
-	else {
-		return parse_state_continue;
-	}
+	return parse_state_continue;
 }
 
 /* The decompression routine  */
-static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *compressed,
+static int usbvision_decompress(struct usb_usbvision *usbvision, unsigned char *compressed,
 								unsigned char *decompressed, int *start_pos,
 								int *block_typestart_pos, int len)
 {
@@ -728,9 +710,8 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 	rest_pixel = len;
 
 	for (idx = 0; idx < len; idx++) {
-
 		if (block_len == 0) {
-			if (block_type_len==0) {
+			if (block_type_len == 0) {
 				block_type_byte = compressed[block_type_pos];
 				block_type_pos++;
 				block_type_len = 4;
@@ -742,7 +723,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 
 			pos = extra_pos;
 			if (block_type == 0) {
-				if(rest_pixel >= 24) {
+				if (rest_pixel >= 24) {
 					idx += 23;
 					rest_pixel -= 24;
 					integrator = decompressed[idx];
@@ -753,11 +734,10 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 			} else {
 				block_code = compressed[pos];
 				pos++;
-				if (rest_pixel >= 24) {
+				if (rest_pixel >= 24)
 					block_len  = 24;
-				} else {
+				else
 					block_len = rest_pixel;
-				}
 				rest_pixel -= block_len;
 				extra_pos = pos + (block_len / 4);
 			}
@@ -765,24 +745,23 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *c
 			block_type_len -= 1;
 		}
 		if (block_len > 0) {
-			if ((block_len%4) == 0) {
+			if ((block_len % 4) == 0) {
 				block_byte = compressed[pos];
 				pos++;
 			}
-			if (block_type == 1) { /* inter Block */
+			if (block_type == 1) /* inter Block */
 				integrator = decompressed[idx];
-			}
 			switch (block_byte & 0xC0) {
-				case 0x03<<6:
-					integrator += compressed[extra_pos];
-					extra_pos++;
-					break;
-				case 0x02<<6:
-					integrator += block_code;
-					break;
-				case 0x00:
-					integrator -= block_code;
-					break;
+			case 0x03 << 6:
+				integrator += compressed[extra_pos];
+				extra_pos++;
+				break;
+			case 0x02 << 6:
+				integrator += block_code;
+				break;
+			case 0x00:
+				integrator -= block_code;
+				break;
 			}
 			decompressed[idx] = integrator;
 			block_byte <<= 2;
@@ -811,45 +790,40 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 #define USBVISION_STRIP_HEADER_LEN	3
 
 	struct usbvision_frame *frame;
-	unsigned char *f,*u = NULL ,*v = NULL;
+	unsigned char *f, *u = NULL, *v = NULL;
 	unsigned char strip_data[USBVISION_STRIP_LEN_MAX];
 	unsigned char strip_header[USBVISION_STRIP_HEADER_LEN];
-	int idx, idx_end, strip_len, strip_ptr, Startblock_pos, block_pos, block_type_pos;
+	int idx, idx_end, strip_len, strip_ptr, startblock_pos, block_pos, block_type_pos;
 	int clipmask_index, bytes_per_pixel, rc;
 	int image_size;
 	unsigned char rv, gv, bv;
 	static unsigned char *Y, *U, *V;
 
-	frame  = usbvision->cur_frame;
+	frame = usbvision->cur_frame;
 	image_size = frame->frmwidth * frame->frmheight;
-	if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
-	     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) {       /* this is a planar format */
+	if ((frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
+	    (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)) {       /* this is a planar format */
 		/* ... v4l2_linesize not used here. */
 		f = frame->data + (frame->width * frame->curline);
 	} else
 		f = frame->data + (frame->v4l2_linesize * frame->curline);
 
-	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ /* initialise u and v pointers */
+	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { /* initialise u and v pointers */
 		/* get base of u and b planes add halfoffset */
-
 		u = frame->data
 			+ image_size
-			+ (frame->frmwidth >>1) * frame->curline ;
-		v = u + (image_size >>1 );
-
-	} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
-
-		v = frame->data + image_size + ((frame->curline* (frame->width))>>2) ;
-		u = v + (image_size >>2) ;
+			+ (frame->frmwidth >> 1) * frame->curline;
+		v = u + (image_size >> 1);
+	} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
+		v = frame->data + image_size + ((frame->curline * (frame->width)) >> 2);
+		u = v + (image_size >> 2);
 	}
 
-	if (frame->curline == 0) {
+	if (frame->curline == 0)
 		usbvision_adjust_compression(usbvision);
-	}
 
-	if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) {
+	if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN)
 		return parse_state_out;
-	}
 
 	/* get strip header without changing the scratch_read_ptr */
 	scratch_set_extra_ptr(usbvision, &strip_ptr, 0);
@@ -863,7 +837,7 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 	}
 
 	if (frame->curline != (int)strip_header[2]) {
-		/* line number missmatch error */
+		/* line number mismatch error */
 		usbvision->strip_line_number_errors++;
 	}
 
@@ -883,8 +857,7 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 		Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline;
 		U = usbvision->intra_frame_buffer + image_size + (frame->frmwidth / 2) * (frame->curline / 2);
 		V = usbvision->intra_frame_buffer + image_size / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
-	}
-	else {
+	} else {
 		return parse_state_next_frame;
 	}
 
@@ -895,107 +868,87 @@ static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision
 
 	idx_end = frame->frmwidth;
 	block_type_pos = USBVISION_STRIP_HEADER_LEN;
-	Startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2;
-	block_pos = Startblock_pos;
+	startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2;
+	block_pos = startblock_pos;
 
 	usbvision->block_pos = block_pos;
 
-	if ((rc = usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end)) != idx_end) {
-		/* return parse_state_continue; */
-	}
-	if (strip_len > usbvision->max_strip_len) {
+	rc = usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end);
+	if (strip_len > usbvision->max_strip_len)
 		usbvision->max_strip_len = strip_len;
-	}
 
-	if (frame->curline%2) {
-		if ((rc = usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
-		/* return parse_state_continue; */
-		}
-	}
-	else {
-		if ((rc = usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end/2)) != idx_end/2) {
-			/* return parse_state_continue; */
-		}
-	}
+	if (frame->curline % 2)
+		rc = usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end / 2);
+	else
+		rc = usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end / 2);
 
-	if (block_pos > usbvision->comprblock_pos) {
+	if (block_pos > usbvision->comprblock_pos)
 		usbvision->comprblock_pos = block_pos;
-	}
-	if (block_pos > strip_len) {
+	if (block_pos > strip_len)
 		usbvision->strip_len_errors++;
-	}
 
 	for (idx = 0; idx < idx_end; idx++) {
-		if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 			*f++ = Y[idx];
-			*f++ = idx & 0x01 ? U[idx/2] : V[idx/2];
-		}
-		else if(frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
+			*f++ = idx & 0x01 ? U[idx / 2] : V[idx / 2];
+		} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
 			*f++ = Y[idx];
-			if ( idx & 0x01)
-				*u++ = U[idx>>1] ;
+			if (idx & 0x01)
+				*u++ = U[idx >> 1];
 			else
-				*v++ = V[idx>>1];
-		}
-		else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
-			*f++ = Y [idx];
-			if ( !((  idx & 0x01  ) | (  frame->curline & 0x01  )) ){
-
-/* 				 only need do this for 1 in 4 pixels */
-/* 				 intraframe buffer is YUV420 format */
-
-				*u++ = U[idx >>1];
-				*v++ = V[idx >>1];
+				*v++ = V[idx >> 1];
+		} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
+			*f++ = Y[idx];
+			if (!((idx & 0x01) | (frame->curline & 0x01))) {
+				/* only need do this for 1 in 4 pixels */
+				/* intraframe buffer is YUV420 format */
+				*u++ = U[idx >> 1];
+				*v++ = V[idx >> 1];
 			}
-
-		}
-		else {
-			YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx/2], V[idx/2], rv, gv, bv);
+		} else {
+			YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx / 2], V[idx / 2], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
-				case V4L2_PIX_FMT_GREY:
-					*f++ = Y[idx];
-					break;
-				case V4L2_PIX_FMT_RGB555:
-					*f++ = (0x1F & rv) |
-						(0xE0 & (gv << 5));
-					*f++ = (0x03 & (gv >> 3)) |
-						(0x7C & (bv << 2));
-					break;
-				case V4L2_PIX_FMT_RGB565:
-					*f++ = (0x1F & rv) |
-						(0xE0 & (gv << 5));
-					*f++ = (0x07 & (gv >> 3)) |
-						(0xF8 &  bv);
-					break;
-				case V4L2_PIX_FMT_RGB24:
-					*f++ = rv;
-					*f++ = gv;
-					*f++ = bv;
-					break;
-				case V4L2_PIX_FMT_RGB32:
-					*f++ = rv;
-					*f++ = gv;
-					*f++ = bv;
-					f++;
-					break;
+			case V4L2_PIX_FMT_GREY:
+				*f++ = Y[idx];
+				break;
+			case V4L2_PIX_FMT_RGB555:
+				*f++ = (0x1F & rv) |
+					(0xE0 & (gv << 5));
+				*f++ = (0x03 & (gv >> 3)) |
+					(0x7C & (bv << 2));
+				break;
+			case V4L2_PIX_FMT_RGB565:
+				*f++ = (0x1F & rv) |
+					(0xE0 & (gv << 5));
+				*f++ = (0x07 & (gv >> 3)) |
+					(0xF8 & bv);
+				break;
+			case V4L2_PIX_FMT_RGB24:
+				*f++ = rv;
+				*f++ = gv;
+				*f++ = bv;
+				break;
+			case V4L2_PIX_FMT_RGB32:
+				*f++ = rv;
+				*f++ = gv;
+				*f++ = bv;
+				f++;
+				break;
 			}
 		}
 		clipmask_index++;
 	}
 	/* Deal with non-integer no. of bytes for YUV420P */
-	if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
+	if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420)
 		*pcopylen += frame->v4l2_linesize;
 	else
 		*pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
 
 	frame->curline += 1;
 
-	if (frame->curline >= frame->frmheight) {
+	if (frame->curline >= frame->frmheight)
 		return parse_state_next_frame;
-	}
-	else {
-		return parse_state_continue;
-	}
+	return parse_state_continue;
 
 }
 
@@ -1016,11 +969,11 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 	unsigned int pixel_per_line, block;
 	int pixel, block_split;
 	int y_ptr, u_ptr, v_ptr, y_odd_offset;
-	const int   y_block_size = 128;
-	const int  uv_block_size = 64;
+	const int y_block_size = 128;
+	const int uv_block_size = 64;
 	const int sub_block_size = 32;
-	const int y_step[] = { 0, 0, 0, 2 },  y_step_size = 4;
-	const int uv_step[]= { 0, 0, 0, 4 }, uv_step_size = 4;
+	const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4;
+	const int uv_step[] = { 0, 0, 0, 4 }, uv_step_size = 4;
 	unsigned char y[2], u, v;	/* YUV components */
 	int y_, u_, v_, vb, uvg, ur;
 	int r_, g_, b_;			/* RGB components */
@@ -1047,9 +1000,8 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 		return parse_state_out;
 	}
 
-	if ((frame->curline + 1) >= frame->frmheight) {
+	if ((frame->curline + 1) >= frame->frmheight)
 		return parse_state_next_frame;
-	}
 
 	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	/* are some blocks splitted into different lines? */
 
@@ -1061,11 +1013,8 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 	scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset
 			+ (4 - block_split) * sub_block_size);
 
-	for (block = 0; block < (pixel_per_line / sub_block_size);
-	     block++) {
-
-
-		for (pixel = 0; pixel < sub_block_size; pixel +=2) {
+	for (block = 0; block < (pixel_per_line / sub_block_size); block++) {
+		for (pixel = 0; pixel < sub_block_size; pixel += 2) {
 			scratch_get(usbvision, &y[0], 2);
 			scratch_get_extra(usbvision, &u, &u_ptr, 1);
 			scratch_get_extra(usbvision, &v, &v_ptr, 1);
@@ -1073,19 +1022,18 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 			/* I don't use the YUV_TO_RGB macro for better performance */
 			v_ = v - 128;
 			u_ = u - 128;
-			vb =              132252 * v_;
-			uvg= -53281 * u_ - 25625 * v_;
+			vb = 132252 * v_;
+			uvg = -53281 * u_ - 25625 * v_;
 			ur = 104595 * u_;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_even++ = y[0];
 				*f_even++ = v;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[0] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1121,15 +1069,14 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 			clipmask_even_index += clipmask_add;
 			f_even += stretch_bytes;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_even++ = y[1];
 				*f_even++ = u;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[1] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1167,15 +1114,14 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 
 			scratch_get_extra(usbvision, &y[0], &y_ptr, 2);
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_odd++ = y[0];
 				*f_odd++ = v;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[0] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1211,15 +1157,14 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 			clipmask_odd_index += clipmask_add;
 			f_odd += stretch_bytes;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_odd++ = y[1];
 				*f_odd++ = u;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[1] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1256,7 +1201,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 			f_odd += stretch_bytes;
 		}
 
-		scratch_rm_old(usbvision,y_step[block % y_step_size] * sub_block_size);
+		scratch_rm_old(usbvision, y_step[block % y_step_size] * sub_block_size);
 		scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size]
 				* sub_block_size);
 		scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size]
@@ -1273,8 +1218,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
 
 	if (frame->curline >= frame->frmheight)
 		return parse_state_next_frame;
-	else
-		return parse_state_continue;
+	return parse_state_continue;
 }
 
 /*
@@ -1297,34 +1241,24 @@ static void usbvision_parse_data(struct usb_usbvision *usbvision)
 	PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision));
 
 	while (1) {
-
 		newstate = parse_state_out;
 		if (scratch_len(usbvision)) {
 			if (frame->scanstate == scan_state_scanning) {
 				newstate = usbvision_find_header(usbvision);
-			}
-			else if (frame->scanstate == scan_state_lines) {
-				if (usbvision->isoc_mode == ISOC_MODE_YUV420) {
+			} else if (frame->scanstate == scan_state_lines) {
+				if (usbvision->isoc_mode == ISOC_MODE_YUV420)
 					newstate = usbvision_parse_lines_420(usbvision, &copylen);
-				}
-				else if (usbvision->isoc_mode == ISOC_MODE_YUV422) {
+				else if (usbvision->isoc_mode == ISOC_MODE_YUV422)
 					newstate = usbvision_parse_lines_422(usbvision, &copylen);
-				}
-				else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
+				else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS)
 					newstate = usbvision_parse_compress(usbvision, &copylen);
-				}
-
 			}
 		}
-		if (newstate == parse_state_continue) {
+		if (newstate == parse_state_continue)
 			continue;
-		}
-		else if ((newstate == parse_state_next_frame) || (newstate == parse_state_out)) {
+		if ((newstate == parse_state_next_frame) || (newstate == parse_state_out))
 			break;
-		}
-		else {
-			return;	/* parse_state_end_parse */
-		}
+		return;	/* parse_state_end_parse */
 	}
 
 	if (newstate == parse_state_next_frame) {
@@ -1344,10 +1278,9 @@ static void usbvision_parse_data(struct usb_usbvision *usbvision)
 			PDEBUG(DBG_PARSE, "Wake up !");
 			wake_up_interruptible(&usbvision->wait_frame);
 		}
-	}
-	else
+	} else {
 		frame->grabstate = frame_state_grabbing;
-
+	}
 
 	/* Update the frame's uncompressed length. */
 	frame->scanlength += copylen;
@@ -1381,14 +1314,12 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 			PDEBUG(DBG_ISOC, "error packet [%d]", i);
 			usbvision->isoc_skip_count++;
 			continue;
-		}
-		else if (packet_len == 0) {	/* Frame end ????? */
+		} else if (packet_len == 0) {	/* Frame end ????? */
 			PDEBUG(DBG_ISOC, "null packet [%d]", i);
-			usbvision->isocstate=isoc_state_no_frame;
+			usbvision->isocstate = isoc_state_no_frame;
 			usbvision->isoc_skip_count++;
 			continue;
-		}
-		else if (packet_len > usbvision->isoc_packet_size) {
+		} else if (packet_len > usbvision->isoc_packet_size) {
 			PDEBUG(DBG_ISOC, "packet[%d] > isoc_packet_size", i);
 			usbvision->isoc_skip_count++;
 			continue;
@@ -1396,8 +1327,8 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 
 		PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len);
 
-		if (usbvision->isocstate==isoc_state_no_frame) { /* new frame begins */
-			usbvision->isocstate=isoc_state_in_frame;
+		if (usbvision->isocstate == isoc_state_no_frame) { /* new frame begins */
+			usbvision->isocstate = isoc_state_in_frame;
 			scratch_mark_header(usbvision);
 			usbvision_measure_bandwidth(usbvision);
 			PDEBUG(DBG_ISOC, "packet with header");
@@ -1412,7 +1343,6 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		 * your favorite evil here.
 		 */
 		if (scratch_free(usbvision) < packet_len) {
-
 			usbvision->scratch_ovf_count++;
 			PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d",
 			       scratch_len(usbvision), packet_len);
@@ -1428,6 +1358,7 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 #if ENABLE_HEXDUMP
 	if (totlen > 0) {
 		static int foo;
+
 		if (foo < 1) {
 			printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen);
 			usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen);
@@ -1435,7 +1366,7 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		}
 	}
 #endif
- return totlen;
+	return totlen;
 }
 
 static void usbvision_isoc_irq(struct urb *urb)
@@ -1452,9 +1383,8 @@ static void usbvision_isoc_irq(struct urb *urb)
 		return;
 
 	/* any urb with wrong status is ignored without acknowledgement */
-	if (urb->status == -ENOENT) {
+	if (urb->status == -ENOENT)
 		return;
-	}
 
 	f = &usbvision->cur_frame;
 
@@ -1476,26 +1406,23 @@ static void usbvision_isoc_irq(struct urb *urb)
 	usbvision->urb_length = len;
 
 	if (usbvision->streaming == stream_on) {
-
 		/* If we collected enough data let's parse! */
-		if ((scratch_len(usbvision) > USBVISION_HEADER_LENGTH) &&
-		    (!list_empty(&(usbvision->inqueue))) ) {
+		if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH &&
+		    !list_empty(&(usbvision->inqueue))) {
 			if (!(*f)) {
 				(*f) = list_entry(usbvision->inqueue.next,
 						  struct usbvision_frame,
 						  frame);
 			}
 			usbvision_parse_data(usbvision);
-		}
-		else {
+		} else {
 			/* If we don't have a frame
 			  we're current working on, complain */
 			PDEBUG(DBG_IRQ,
 			       "received data, but no one needs it");
 			scratch_reset(usbvision);
 		}
-	}
-	else {
+	} else {
 		PDEBUG(DBG_IRQ, "received data, but no one needs it");
 		scratch_reset(usbvision);
 	}
@@ -1509,9 +1436,9 @@ static void usbvision_isoc_irq(struct urb *urb)
 
 	urb->status = 0;
 	urb->dev = usbvision->dev;
-	err_code = usb_submit_urb (urb, GFP_ATOMIC);
+	err_code = usb_submit_urb(urb, GFP_ATOMIC);
 
-	if(err_code) {
+	if (err_code) {
 		dev_err(&usbvision->dev->dev,
 			"%s: usb_submit_urb failed: error %d\n",
 				__func__, err_code);
@@ -1587,24 +1514,21 @@ static void usbvision_ctrl_urb_complete(struct urb *urb)
 
 	PDEBUG(DBG_IRQ, "");
 	usbvision->ctrl_urb_busy = 0;
-	if (waitqueue_active(&usbvision->ctrl_urb_wq)) {
+	if (waitqueue_active(&usbvision->ctrl_urb_wq))
 		wake_up_interruptible(&usbvision->ctrl_urb_wq);
-	}
 }
 
 
-static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
-									unsigned char *data, int len)
+static int usbvision_write_reg_irq(struct usb_usbvision *usbvision, int address,
+				unsigned char *data, int len)
 {
 	int err_code = 0;
 
 	PDEBUG(DBG_IRQ, "");
-	if (len > 8) {
+	if (len > 8)
 		return -EFAULT;
-	}
-	if (usbvision->ctrl_urb_busy) {
+	if (usbvision->ctrl_urb_busy)
 		return -EBUSY;
-	}
 	usbvision->ctrl_urb_busy = 1;
 
 	usbvision->ctrl_urb_setup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
@@ -1612,7 +1536,7 @@ static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
 	usbvision->ctrl_urb_setup.wValue       = 0;
 	usbvision->ctrl_urb_setup.wIndex       = cpu_to_le16(address);
 	usbvision->ctrl_urb_setup.wLength      = cpu_to_le16(len);
-	usb_fill_control_urb (usbvision->ctrl_urb, usbvision->dev,
+	usb_fill_control_urb(usbvision->ctrl_urb, usbvision->dev,
 							usb_sndctrlpipe(usbvision->dev, 1),
 							(unsigned char *)&usbvision->ctrl_urb_setup,
 							(void *)usbvision->ctrl_urb_buffer, len,
@@ -1652,7 +1576,7 @@ static int usbvision_init_compression(struct usb_usbvision *usbvision)
  * return:    0 : no error
  * sets used_bandwidth to 1-100 : 1-100% of full bandwidth resp. to isoc_packet_size
  */
-static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
+static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision)
 {
 	int err_code = 0;
 
@@ -1672,7 +1596,7 @@ static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
 	return err_code;
 }
 
-static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
+static int usbvision_adjust_compression(struct usb_usbvision *usbvision)
 {
 	int err_code = 0;
 	unsigned char buffer[6];
@@ -1682,29 +1606,29 @@ static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
 		usbvision->compr_level += (usbvision->used_bandwidth - 90) / 2;
 		RESTRICT_TO_RANGE(usbvision->compr_level, 0, 100);
 		if (usbvision->compr_level != usbvision->last_compr_level) {
-			int distorsion;
+			int distortion;
+
 			if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) {
 				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM Threshold 1 */
 				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM Threshold 2 */
-				distorsion = 7 + 248 * usbvision->compr_level / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				/* Average distorsion Threshold (inter) */
-				buffer[3] = (unsigned char)(distorsion & 0xFF);				/* Average distorsion Threshold (intra) */
-				distorsion = 1 + 42 * usbvision->compr_level / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				/* Maximum distorsion Threshold (inter) */
-				buffer[5] = (unsigned char)(distorsion & 0xFF);				/* Maximum distorsion Threshold (intra) */
-			}
-			else { /* BRIDGE_NT1003 */
+				distortion = 7 + 248 * usbvision->compr_level / 100;
+				buffer[2] = (unsigned char)(distortion & 0xFF);				/* Average distortion Threshold (inter) */
+				buffer[3] = (unsigned char)(distortion & 0xFF);				/* Average distortion Threshold (intra) */
+				distortion = 1 + 42 * usbvision->compr_level / 100;
+				buffer[4] = (unsigned char)(distortion & 0xFF);				/* Maximum distortion Threshold (inter) */
+				buffer[5] = (unsigned char)(distortion & 0xFF);				/* Maximum distortion Threshold (intra) */
+			} else { /* BRIDGE_NT1003 */
 				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM threshold 1 */
 				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM threshold 2 */
-				distorsion = 2 + 253 * usbvision->compr_level / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				/* distorsion threshold bit0-7 */
-				buffer[3] = 0; 	/* (unsigned char)((distorsion >> 8) & 0x0F);		distorsion threshold bit 8-11 */
-				distorsion = 0 + 43 * usbvision->compr_level / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				/* maximum distorsion bit0-7 */
-				buffer[5] = 0; /* (unsigned char)((distorsion >> 8) & 0x01);		maximum distorsion bit 8 */
+				distortion = 2 + 253 * usbvision->compr_level / 100;
+				buffer[2] = (unsigned char)(distortion & 0xFF);				/* distortion threshold bit0-7 */
+				buffer[3] = 0;	/* (unsigned char)((distortion >> 8) & 0x0F);		distortion threshold bit 8-11 */
+				distortion = 0 + 43 * usbvision->compr_level / 100;
+				buffer[4] = (unsigned char)(distortion & 0xFF);				/* maximum distortion bit0-7 */
+				buffer[5] = 0; /* (unsigned char)((distortion >> 8) & 0x01);		maximum distortion bit 8 */
 			}
 			err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
-			if (err_code == 0){
+			if (err_code == 0) {
 				PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0],
 								buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]);
 				usbvision->last_compr_level = usbvision->compr_level;
@@ -1714,7 +1638,7 @@ static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
 	return err_code;
 }
 
-static int usbvision_request_intra (struct usb_usbvision *usbvision)
+static int usbvision_request_intra(struct usb_usbvision *usbvision)
 {
 	int err_code = 0;
 	unsigned char buffer[1];
@@ -1726,7 +1650,7 @@ static int usbvision_request_intra (struct usb_usbvision *usbvision)
 	return err_code;
 }
 
-static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
+static int usbvision_unrequest_intra(struct usb_usbvision *usbvision)
 {
 	int err_code = 0;
 	unsigned char buffer[1];
@@ -1749,10 +1673,9 @@ int usbvision_power_off(struct usb_usbvision *usbvision)
 	PDEBUG(DBG_FUNC, "");
 
 	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
-	if (err_code == 1) {
+	if (err_code == 1)
 		usbvision->power = 0;
-	}
-	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code!=1)?"ERROR":"power is off", err_code);
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code != 1) ? "ERROR" : "power is off", err_code);
 	return err_code;
 }
 
@@ -1804,18 +1727,16 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 {
 	int err_code = 0;
 	int usb_width, usb_height;
-	unsigned int frame_rate=0, frame_drop=0;
+	unsigned int frame_rate = 0, frame_drop = 0;
 	unsigned char value[4];
 
-	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
+	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
-	}
 
 	if (width > MAX_USB_WIDTH) {
 		usb_width = width / 2;
 		usbvision->stretch_width = 2;
-	}
-	else {
+	} else {
 		usb_width = width;
 		usbvision->stretch_width = 1;
 	}
@@ -1823,8 +1744,7 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 	if (height > MAX_USB_HEIGHT) {
 		usb_height = height / 2;
 		usbvision->stretch_height = 2;
-	}
-	else {
+	} else {
 		usb_height = height;
 		usbvision->stretch_height = 1;
 	}
@@ -1859,28 +1779,23 @@ int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 		usbvision->curheight = usbvision->stretch_height * usb_height;
 	}
 
-	if (usbvision->isoc_mode == ISOC_MODE_YUV422) {
+	if (usbvision->isoc_mode == ISOC_MODE_YUV422)
 		frame_rate = (usbvision->isoc_packet_size * 1000) / (usb_width * usb_height * 2);
-	}
-	else if (usbvision->isoc_mode == ISOC_MODE_YUV420) {
+	else if (usbvision->isoc_mode == ISOC_MODE_YUV420)
 		frame_rate = (usbvision->isoc_packet_size * 1000) / ((usb_width * usb_height * 12) / 8);
-	}
-	else {
+	else
 		frame_rate = FRAMERATE_MAX;
-	}
 
-	if (usbvision->tvnorm_id & V4L2_STD_625_50) {
+	if (usbvision->tvnorm_id & V4L2_STD_625_50)
 		frame_drop = frame_rate * 32 / 25 - 1;
-	}
-	else if (usbvision->tvnorm_id & V4L2_STD_525_60) {
+	else if (usbvision->tvnorm_id & V4L2_STD_525_60)
 		frame_drop = frame_rate * 32 / 30 - 1;
-	}
 
 	RESTRICT_TO_RANGE(frame_drop, FRAMERATE_MIN, FRAMERATE_MAX);
 
 	PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop);
 
-	frame_drop = FRAMERATE_MAX; 	/* We can allow the maximum here, because dropping is controlled */
+	frame_drop = FRAMERATE_MAX;	/* We can allow the maximum here, because dropping is controlled */
 
 	/* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
 		=> frame_skip = 4;
@@ -1904,7 +1819,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 	int i;
 
 	/* needs to be page aligned cause the buffers can be mapped individually! */
-	usbvision->max_frame_size =  PAGE_ALIGN(usbvision->curwidth *
+	usbvision->max_frame_size = PAGE_ALIGN(usbvision->curwidth *
 						usbvision->curheight *
 						usbvision->palette.bytes_per_pixel);
 
@@ -1912,9 +1827,9 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 	usbvision->num_frames = number_of_frames;
 	while (usbvision->num_frames > 0) {
 		usbvision->fbuf_size = usbvision->num_frames * usbvision->max_frame_size;
-		if((usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size))) {
+		usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size);
+		if (usbvision->fbuf)
 			break;
-		}
 		usbvision->num_frames--;
 	}
 
@@ -1937,7 +1852,8 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 		usbvision->frame[i].height = usbvision->curheight;
 		usbvision->frame[i].bytes_read = 0;
 	}
-	PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)",usbvision->num_frames,usbvision->max_frame_size);
+	PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)",
+			usbvision->num_frames, usbvision->max_frame_size);
 	return usbvision->num_frames;
 }
 
@@ -1948,7 +1864,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 void usbvision_frames_free(struct usb_usbvision *usbvision)
 {
 	/* Have to free all that memory */
-	PDEBUG(DBG_FUNC, "free %d frames",usbvision->num_frames);
+	PDEBUG(DBG_FUNC, "free %d frames", usbvision->num_frames);
 
 	if (usbvision->fbuf != NULL) {
 		usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size);
@@ -2033,18 +1949,17 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	if (usbvision->bridge_type == BRIDGE_NT1004) {
 		value[0] =  20; /* PCM Threshold 1 */
 		value[1] =  12; /* PCM Threshold 2 */
-		value[2] = 255; /* Distorsion Threshold inter */
-		value[3] = 255; /* Distorsion Threshold intra */
-		value[4] =  43; /* Max Distorsion inter */
-		value[5] =  43; /* Max Distorsion intra */
-	}
-	else {
+		value[2] = 255; /* Distortion Threshold inter */
+		value[3] = 255; /* Distortion Threshold intra */
+		value[4] =  43; /* Max Distortion inter */
+		value[5] =  43; /* Max Distortion intra */
+	} else {
 		value[0] =  20; /* PCM Threshold 1 */
 		value[1] =  12; /* PCM Threshold 2 */
-		value[2] = 255; /* Distorsion Threshold d7-d0 */
-		value[3] =   0; /* Distorsion Threshold d11-d8 */
-		value[4] =  43; /* Max Distorsion d7-d0 */
-		value[5] =   0; /* Max Distorsion d8 */
+		value[2] = 255; /* Distortion Threshold d7-d0 */
+		value[3] =   0; /* Distortion Threshold d11-d8 */
+		value[4] =  43; /* Max Distortion d7-d0 */
+		value[5] =   0; /* Max Distortion d8 */
 	}
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
@@ -2059,10 +1974,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	if (rc < 0) {
 		printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
 		       "reconnect or reload driver.\n", proc, rc);
-		return rc;
 	}
-
-
 	return rc;
 }
 
@@ -2087,7 +1999,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 	/* Set input format expected from decoder*/
 	if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) {
 		value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1;
-	} else if(usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
+	} else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
 		/* SAA7113 uses 8 bit output */
 		value[0] = USBVISION_8_422_SYNC;
 	} else {
@@ -2135,8 +2047,8 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 	}
 
 	if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) {
-		value[4]=usbvision_device_data[usbvision->dev_model].x_offset & 0xff;
-		value[5]=(usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8;
+		value[4] = usbvision_device_data[usbvision->dev_model].x_offset & 0xff;
+		value[5] = (usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8;
 	}
 
 	if (adjust_x_offset != -1) {
@@ -2145,8 +2057,8 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 	}
 
 	if (usbvision_device_data[usbvision->dev_model].y_offset >= 0) {
-		value[6]=usbvision_device_data[usbvision->dev_model].y_offset & 0xff;
-		value[7]=(usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8;
+		value[6] = usbvision_device_data[usbvision->dev_model].y_offset & 0xff;
+		value[7] = (usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8;
 	}
 
 	if (adjust_y_offset != -1) {
@@ -2167,15 +2079,14 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 
 	dvi_yuv_value = 0x00;	/* U comes after V, Ya comes after U/V, Yb comes after Yb */
 
-	if(usbvision_device_data[usbvision->dev_model].dvi_yuv_override){
+	if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override) {
 		dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv;
-	}
-	else if(usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
-	/* This changes as the fine sync control changes. Further investigation necessary */
+	} else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
+		/* This changes as the fine sync control changes. Further investigation necessary */
 		dvi_yuv_value = 0x06;
 	}
 
-	return (usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value));
+	return usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value);
 }
 
 
@@ -2204,8 +2115,7 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 		/* UR:  0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) */
 		/* FDL: 0x00000-0x0E099 =  57498 Words */
 		/* VDW: 0x0E3FF-0x3FFFF */
-	}
-	else {
+	} else {
 		value[0] = 0x42;
 		value[1] = 0x00;
 		value[2] = 0xff;
@@ -2218,14 +2128,14 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	/* These are the values of the address of the video buffer,
 	 * they have to be loaded into the USBVISION_DRM_PRM1-8
 	 *
-	 * Start address of video output buffer for read: 	drm_prm1-2 -> 0x00000
-	 * End address of video output buffer for read: 	drm_prm1-3 -> 0x1ffff
-	 * Start address of video frame delay buffer: 		drm_prm1-4 -> 0x20000
+	 * Start address of video output buffer for read:	drm_prm1-2 -> 0x00000
+	 * End address of video output buffer for read:		drm_prm1-3 -> 0x1ffff
+	 * Start address of video frame delay buffer:		drm_prm1-4 -> 0x20000
 	 *    Only used in compressed mode
-	 * End address of video frame delay buffer: 		drm_prm1-5-6 -> 0x3ffff
+	 * End address of video frame delay buffer:		drm_prm1-5-6 -> 0x3ffff
 	 *    Only used in compressed mode
-	 * Start address of video output buffer for write: 	drm_prm1-7 -> 0x00000
-	 * End address of video output buffer for write: 	drm_prm1-8 -> 0x1ffff
+	 * Start address of video output buffer for write:	drm_prm1-7 -> 0x00000
+	 * End address of video output buffer for write:	drm_prm1-8 -> 0x1ffff
 	 */
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
@@ -2243,8 +2153,9 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	}
 
 	/* Restart the video buffer logic */
-	if ((rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR |
-				   USBVISION_RES_FDL | USBVISION_RES_VDW)) < 0)
+	rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR |
+				   USBVISION_RES_FDL | USBVISION_RES_VDW);
+	if (rc < 0)
 		return rc;
 	rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00);
 
@@ -2267,16 +2178,15 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
 
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			 USBVISION_SSPND_EN | USBVISION_RES2);
+			USBVISION_SSPND_EN | USBVISION_RES2);
 
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			 USBVISION_SSPND_EN | USBVISION_PWR_VID);
+			USBVISION_SSPND_EN | USBVISION_PWR_VID);
 	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-						USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
-	if (err_code == 1) {
+			USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
+	if (err_code == 1)
 		usbvision->power = 1;
-	}
-	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code<0)?"ERROR":"power is on", err_code);
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code < 0) ? "ERROR" : "power is on", err_code);
 	return err_code;
 }
 
@@ -2294,7 +2204,7 @@ static void call_usbvision_power_off(struct work_struct *work)
 	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
 		return;
 
-	if(usbvision->user == 0) {
+	if (usbvision->user == 0) {
 		usbvision_i2c_unregister(usbvision);
 
 		usbvision_power_off(usbvision);
@@ -2305,7 +2215,7 @@ static void call_usbvision_power_off(struct work_struct *work)
 
 static void usbvision_power_off_timer(unsigned long data)
 {
-	struct usb_usbvision *usbvision = (void *) data;
+	struct usb_usbvision *usbvision = (void *)data;
 
 	PDEBUG(DBG_FUNC, "");
 	del_timer(&usbvision->power_off_timer);
@@ -2316,7 +2226,7 @@ static void usbvision_power_off_timer(unsigned long data)
 void usbvision_init_power_off_timer(struct usb_usbvision *usbvision)
 {
 	init_timer(&usbvision->power_off_timer);
-	usbvision->power_off_timer.data = (long) usbvision;
+	usbvision->power_off_timer.data = (long)usbvision;
 	usbvision->power_off_timer.function = usbvision_power_off_timer;
 }
 
@@ -2327,9 +2237,8 @@ void usbvision_set_power_off_timer(struct usb_usbvision *usbvision)
 
 void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision)
 {
-	if (timer_pending(&usbvision->power_off_timer)) {
+	if (timer_pending(&usbvision->power_off_timer))
 		del_timer(&usbvision->power_off_timer);
-	}
 }
 
 /*
@@ -2339,14 +2248,10 @@ void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision)
  */
 int usbvision_begin_streaming(struct usb_usbvision *usbvision)
 {
-	int err_code = 0;
-
-	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
+	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS)
 		usbvision_init_compression(usbvision);
-	}
-	err_code = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID |
-										usbvision->vin_reg2_preset);
-	return err_code;
+	return usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
+		USBVISION_NOHVALID | usbvision->vin_reg2_preset);
 }
 
 /*
@@ -2358,25 +2263,24 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision)
 {
 	int ret;
 
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			      USBVISION_SSPND_EN | USBVISION_PWR_VID)) < 0)
+	ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+			      USBVISION_SSPND_EN | USBVISION_PWR_VID);
+	if (ret < 0)
 		return ret;
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+	ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
 			      USBVISION_SSPND_EN | USBVISION_PWR_VID |
-			      USBVISION_RES2)) < 0)
+			      USBVISION_RES2);
+	if (ret < 0)
 		return ret;
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
+	ret = usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
 			      USBVISION_KEEP_BLANK | USBVISION_NOHVALID |
-				  usbvision->vin_reg2_preset)) < 0) return ret;
+				  usbvision->vin_reg2_preset);
+	if (ret < 0)
+		return ret;
 
 	/* TODO: schedule timeout */
-	while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1);
+	while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1)
+		;
 
 	return 0;
 }
@@ -2384,7 +2288,7 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision)
 int usbvision_audio_off(struct usb_usbvision *usbvision)
 {
 	if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) {
-		printk(KERN_ERR "usbvision_audio_off: can't wirte reg\n");
+		printk(KERN_ERR "usbvision_audio_off: can't write reg\n");
 		return -1;
 	}
 	usbvision->audio_mute = 0;
@@ -2404,7 +2308,7 @@ int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel)
 	return 0;
 }
 
-int usbvision_setup(struct usb_usbvision *usbvision,int format)
+int usbvision_setup(struct usb_usbvision *usbvision, int format)
 {
 	usbvision_set_video_format(usbvision, format);
 	usbvision_set_dram_settings(usbvision);
@@ -2422,14 +2326,15 @@ int usbvision_set_alternate(struct usb_usbvision *dev)
 	int err_code, prev_alt = dev->iface_alt;
 	int i;
 
-	dev->iface_alt=0;
-	for(i=0;i< dev->num_alt; i++)
-		if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->iface_alt])
-			dev->iface_alt=i;
+	dev->iface_alt = 0;
+	for (i = 0; i < dev->num_alt; i++)
+		if (dev->alt_max_pkt_size[i] > dev->alt_max_pkt_size[dev->iface_alt])
+			dev->iface_alt = i;
 
 	if (dev->iface_alt != prev_alt) {
 		dev->isoc_packet_size = dev->alt_max_pkt_size[dev->iface_alt];
-		PDEBUG(DBG_FUNC,"setting alternate %d with max_packet_size=%u", dev->iface_alt,dev->isoc_packet_size);
+		PDEBUG(DBG_FUNC, "setting alternate %d with max_packet_size=%u",
+				dev->iface_alt, dev->isoc_packet_size);
 		err_code = usb_set_interface(dev->dev, dev->iface, dev->iface_alt);
 		if (err_code < 0) {
 			dev_err(&dev->dev->dev,
@@ -2549,7 +2454,7 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision)
 	/* Unschedule all of the iso td's */
 	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
 		usb_kill_urb(usbvision->sbuf[buf_idx].urb);
-		if (usbvision->sbuf[buf_idx].data){
+		if (usbvision->sbuf[buf_idx].data) {
 			usb_free_coherent(usbvision->dev,
 					  sb_size,
 					  usbvision->sbuf[buf_idx].data,
@@ -2563,9 +2468,8 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision)
 	usbvision->streaming = stream_off;
 
 	if (!usbvision->remove_pending) {
-
 		/* Set packet size to 0 */
-		usbvision->iface_alt=0;
+		usbvision->iface_alt = 0;
 		err_code = usb_set_interface(usbvision->dev, usbvision->iface,
 					    usbvision->iface_alt);
 		if (err_code < 0) {
@@ -2590,8 +2494,8 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
 {
 	/* inputs #0 and #3 are constant for every SAA711x. */
 	/* inputs #1 and #2 are variable for SAA7111 and SAA7113 */
-	int mode[4]= {SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3};
-	int audio[]= {1, 0, 0, 0};
+	int mode[4] = { SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3 };
+	int audio[] = { 1, 0, 0, 0 };
 	/* channel 0 is TV with audiochannel 1 (tuner mono) */
 	/* channel 1 is Composite with audio channel 0 (line in) */
 	/* channel 2 is S-Video with audio channel 0 (line in) */
@@ -2605,24 +2509,23 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
 	/* Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red */
 
 	switch (usbvision_device_data[usbvision->dev_model].codec) {
-		case CODEC_SAA7113:
-			mode[1] = SAA7115_COMPOSITE2;
-			if (switch_svideo_input) {
-				/* To handle problems with S-Video Input for
-				 * some devices.  Use switch_svideo_input
-				 * parameter when loading the module.*/
-				mode[2] = SAA7115_COMPOSITE1;
-			}
-			else {
-				mode[2] = SAA7115_SVIDEO1;
-			}
-			break;
-		case CODEC_SAA7111:
-		default:
-			/* modes for saa7111 */
-			mode[1] = SAA7115_COMPOSITE1;
+	case CODEC_SAA7113:
+		mode[1] = SAA7115_COMPOSITE2;
+		if (switch_svideo_input) {
+			/* To handle problems with S-Video Input for
+			 * some devices.  Use switch_svideo_input
+			 * parameter when loading the module.*/
+			mode[2] = SAA7115_COMPOSITE1;
+		} else {
 			mode[2] = SAA7115_SVIDEO1;
-			break;
+		}
+		break;
+	case CODEC_SAA7111:
+	default:
+		/* modes for saa7111 */
+		mode[1] = SAA7115_COMPOSITE1;
+		mode[2] = SAA7115_SVIDEO1;
+		break;
 	}
 	call_all(usbvision, video, s_routing, mode[channel], 0, 0);
 	usbvision_set_audio(usbvision, audio[channel]);
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index cb19c8448c56..05b1344181cd 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -28,18 +28,18 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/ioport.h>
 #include <linux/errno.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include "usbvision.h"
 
-#define DBG_I2C		1<<0
+#define DBG_I2C		(1 << 0)
 
 static int i2c_debug;
 
-module_param (i2c_debug, int, 0644);			/* debug_i2c_usb mode of the device driver */
+module_param(i2c_debug, int, 0644);			/* debug_i2c_usb mode of the device driver */
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
 #define PDEBUG(level, fmt, args...) { \
@@ -72,8 +72,8 @@ static inline int try_write_address(struct i2c_adapter *i2c_adap,
 		udelay(10);
 	}
 	if (i) {
-		PDEBUG(DBG_I2C,"Needed %d retries for address %#2x", i, addr);
-		PDEBUG(DBG_I2C,"Maybe there's no device at this address");
+		PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr);
+		PDEBUG(DBG_I2C, "Maybe there's no device at this address");
 	}
 	return ret;
 }
@@ -96,8 +96,8 @@ static inline int try_read_address(struct i2c_adapter *i2c_adap,
 		udelay(10);
 	}
 	if (i) {
-		PDEBUG(DBG_I2C,"Needed %d retries for address %#2x", i, addr);
-		PDEBUG(DBG_I2C,"Maybe there's no device at this address");
+		PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr);
+		PDEBUG(DBG_I2C, "Maybe there's no device at this address");
 	}
 	return ret;
 }
@@ -143,9 +143,8 @@ static inline int usb_find_address(struct i2c_adapter *i2c_adap,
 		else
 			ret = try_write_address(i2c_adap, addr, retries);
 
-		if (ret != 1) {
+		if (ret != 1)
 			return -EREMOTEIO;
-		}
 	}
 	return 0;
 }
@@ -164,22 +163,20 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
 		pmsg = &msgs[i];
 		ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr);
 		if (ret != 0) {
-			PDEBUG(DBG_I2C,"got NAK from device, message #%d", i);
+			PDEBUG(DBG_I2C, "got NAK from device, message #%d", i);
 			return (ret < 0) ? ret : -EREMOTEIO;
 		}
 
 		if (pmsg->flags & I2C_M_RD) {
 			/* read bytes into buffer */
 			ret = (usbvision_i2c_read(usbvision, addr, pmsg->buf, pmsg->len));
-			if (ret < pmsg->len) {
+			if (ret < pmsg->len)
 				return (ret < 0) ? ret : -EREMOTEIO;
-			}
 		} else {
 			/* write bytes from buffer */
 			ret = (usbvision_i2c_write(usbvision, addr, pmsg->buf, pmsg->len));
-			if (ret < pmsg->len) {
+			if (ret < pmsg->len)
 				return (ret < 0) ? ret : -EREMOTEIO;
-			}
 		}
 	}
 	return num;
@@ -219,7 +216,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 
 	sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name,
 		usbvision->dev->bus->busnum, usbvision->dev->devpath);
-	PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
+	PDEBUG(DBG_I2C, "Adaptername: %s", usbvision->i2c_adap.name);
 	usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
 
 	i2c_set_adapdata(&usbvision->i2c_adap, &usbvision->v4l2_dev);
@@ -293,7 +290,7 @@ int usbvision_i2c_unregister(struct usb_usbvision *usbvision)
 	i2c_del_adapter(&(usbvision->i2c_adap));
 	usbvision->registered_i2c = 0;
 
-	PDEBUG(DBG_I2C,"i2c bus for %s unregistered", usbvision->i2c_adap.name);
+	PDEBUG(DBG_I2C, "i2c bus for %s unregistered", usbvision->i2c_adap.name);
 
 	return 0;
 }
@@ -355,9 +352,9 @@ usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr,
 
 	if (i2c_debug & DBG_I2C) {
 		int idx;
-		for (idx = 0; idx < len; idx++) {
-			PDEBUG(DBG_I2C,"read %x from address %x", (unsigned char)buf[idx], addr);
-		}
+
+		for (idx = 0; idx < len; idx++)
+			PDEBUG(DBG_I2C, "read %x from address %x", (unsigned char)buf[idx], addr);
 	}
 	return len;
 }
@@ -416,9 +413,9 @@ static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision,
 
 	if (i2c_debug & DBG_I2C) {
 		int idx;
-		for (idx = 0; idx < len; idx++) {
-			PDEBUG(DBG_I2C,"wrote %x at address %x", (unsigned char)buf[idx], addr);
-		}
+
+		for (idx = 0; idx < len; idx++)
+			PDEBUG(DBG_I2C, "wrote %x at address %x", (unsigned char)buf[idx], addr);
 	}
 	return len;
 }
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 375355a8fe1c..6083137f0bf8 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -56,7 +56,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
@@ -70,8 +70,8 @@
 #include "usbvision.h"
 #include "usbvision-cards.h"
 
-#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>,\
- Dwaine Garden <DwaineGarden@rogers.com>"
+#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, \
+Dwaine Garden <DwaineGarden@rogers.com>"
 #define DRIVER_NAME "usbvision"
 #define DRIVER_ALIAS "USBVision"
 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
@@ -82,9 +82,9 @@
 #define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,\
 USBVISION_DRIVER_VERSION_MINOR,\
 USBVISION_DRIVER_VERSION_PATCHLEVEL)
-#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR)\
- "." __stringify(USBVISION_DRIVER_VERSION_MINOR)\
- "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
+#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) \
+"." __stringify(USBVISION_DRIVER_VERSION_MINOR) \
+"." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
 
@@ -96,16 +96,16 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL)
 				__func__, __LINE__ , ## args); \
 	}
 #else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
+	#define PDEBUG(level, fmt, args...) do {} while (0)
 #endif
 
-#define DBG_IO		1<<1
-#define DBG_PROBE	1<<2
-#define DBG_MMAP	1<<3
+#define DBG_IO		(1 << 1)
+#define DBG_PROBE	(1 << 2)
+#define DBG_MMAP	(1 << 3)
 
 /* String operations */
-#define rmspace(str)	while(*str==' ') str++;
-#define goto2next(str)	while(*str!=' ') str++; while(*str==' ') str++;
+#define rmspace(str)	while (*str == ' ') str++;
+#define goto2next(str)	while (*str != ' ') str++; while (*str == ' ') str++;
 
 
 /* sequential number of usbvision device */
@@ -205,7 +205,7 @@ static ssize_t show_hue(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_HUE;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -220,7 +220,7 @@ static ssize_t show_contrast(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_CONTRAST;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -235,7 +235,7 @@ static ssize_t show_brightness(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_BRIGHTNESS;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -250,7 +250,7 @@ static ssize_t show_saturation(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_SATURATION;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -263,7 +263,7 @@ static ssize_t show_streaming(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->streaming==stream_on?1:0));
+		       YES_NO(usbvision->streaming == stream_on ? 1 : 0));
 }
 static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
 
@@ -274,7 +274,7 @@ static ssize_t show_compression(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->isoc_mode==ISOC_MODE_COMPRESS));
+		       YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS));
 }
 static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
 
@@ -291,35 +291,36 @@ static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
 static void usbvision_create_sysfs(struct video_device *vdev)
 {
 	int res;
+
 	if (!vdev)
 		return;
 	do {
 		res = device_create_file(&vdev->dev, &dev_attr_version);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_model);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_hue);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_contrast);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_brightness);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_saturation);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_streaming);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_compression);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_bridge);
-		if (res>=0)
+		if (res >= 0)
 			return;
 	} while (0);
 
@@ -363,7 +364,7 @@ static int usbvision_v4l2_open(struct file *file)
 	else {
 		/* Allocate memory for the scratch ring buffer */
 		err_code = usbvision_scratch_alloc(usbvision);
-		if (isoc_mode==ISOC_MODE_COMPRESS) {
+		if (isoc_mode == ISOC_MODE_COMPRESS) {
 			/* Allocate intermediate decompression buffers
 			   only if needed */
 			err_code = usbvision_decompress_alloc(usbvision);
@@ -385,7 +386,7 @@ static int usbvision_v4l2_open(struct file *file)
 		/* Send init sequence only once, it's large! */
 		if (!usbvision->initialized) {
 			int setup_ok = 0;
-			setup_ok = usbvision_setup(usbvision,isoc_mode);
+			setup_ok = usbvision_setup(usbvision, isoc_mode);
 			if (setup_ok)
 				usbvision->initialized = 1;
 			else
@@ -396,7 +397,7 @@ static int usbvision_v4l2_open(struct file *file)
 			usbvision_begin_streaming(usbvision);
 			err_code = usbvision_init_isoc(usbvision);
 			/* device must be initialized before isoc transfer */
-			usbvision_muxsel(usbvision,0);
+			usbvision_muxsel(usbvision, 0);
 			usbvision->user++;
 		} else {
 			if (power_on_at_open) {
@@ -463,7 +464,7 @@ static int usbvision_v4l2_close(struct file *file)
  *
  */
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vidioc_g_register (struct file *file, void *priv,
+static int vidioc_g_register(struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -484,7 +485,7 @@ static int vidioc_g_register (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_s_register (struct file *file, void *priv,
+static int vidioc_s_register(struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -493,7 +494,7 @@ static int vidioc_s_register (struct file *file, void *priv,
 	if (!v4l2_chip_match_host(&reg->match))
 		return -EINVAL;
 	/* NT100x has a 8-bit register space */
-	err_code = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
+	err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val);
 	if (err_code < 0) {
 		dev_err(&usbvision->vdev->dev,
 			"%s: VIDIOC_DBG_S_REGISTER failed: error %d\n",
@@ -504,7 +505,7 @@ static int vidioc_s_register (struct file *file, void *priv,
 }
 #endif
 
-static int vidioc_querycap (struct file *file, void  *priv,
+static int vidioc_querycap(struct file *file, void  *priv,
 					struct v4l2_capability *vc)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -523,7 +524,7 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	return 0;
 }
 
-static int vidioc_enum_input (struct file *file, void *priv,
+static int vidioc_enum_input(struct file *file, void *priv,
 				struct v4l2_input *vi)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -531,14 +532,14 @@ static int vidioc_enum_input (struct file *file, void *priv,
 
 	if (vi->index >= usbvision->video_inputs)
 		return -EINVAL;
-	if (usbvision->have_tuner) {
+	if (usbvision->have_tuner)
 		chan = vi->index;
-	} else {
+	else
 		chan = vi->index + 1; /* skip Television string*/
-	}
+
 	/* Determine the requested input characteristics
 	   specific for each usbvision card model */
-	switch(chan) {
+	switch (chan) {
 	case 0:
 		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
 			strcpy(vi->name, "White Video Input");
@@ -552,20 +553,18 @@ static int vidioc_enum_input (struct file *file, void *priv,
 		break;
 	case 1:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
 			strcpy(vi->name, "Green Video Input");
-		} else {
+		else
 			strcpy(vi->name, "Composite Video Input");
-		}
 		vi->std = V4L2_STD_PAL;
 		break;
 	case 2:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
 			strcpy(vi->name, "Yellow Video Input");
-		} else {
+		else
 			strcpy(vi->name, "S-Video Input");
-		}
 		vi->std = V4L2_STD_PAL;
 		break;
 	case 3:
@@ -577,7 +576,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_input (struct file *file, void *priv, unsigned int *input)
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *input)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
@@ -585,7 +584,7 @@ static int vidioc_g_input (struct file *file, void *priv, unsigned int *input)
 	return 0;
 }
 
-static int vidioc_s_input (struct file *file, void *priv, unsigned int input)
+static int vidioc_s_input(struct file *file, void *priv, unsigned int input)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
@@ -600,11 +599,11 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int input)
 	return 0;
 }
 
-static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	usbvision->tvnorm_id=*id;
+	usbvision->tvnorm_id = *id;
 
 	call_all(usbvision, core, s_std, usbvision->tvnorm_id);
 	/* propagate the change to the decoder */
@@ -613,14 +612,14 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
 	return 0;
 }
 
-static int vidioc_g_tuner (struct file *file, void *priv,
+static int vidioc_g_tuner(struct file *file, void *priv,
 				struct v4l2_tuner *vt)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	if (!usbvision->have_tuner || vt->index)	/* Only tuner 0 */
 		return -EINVAL;
-	if(usbvision->radio) {
+	if (usbvision->radio) {
 		strcpy(vt->name, "Radio");
 		vt->type = V4L2_TUNER_RADIO;
 	} else {
@@ -632,7 +631,7 @@ static int vidioc_g_tuner (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_s_tuner (struct file *file, void *priv,
+static int vidioc_s_tuner(struct file *file, void *priv,
 				struct v4l2_tuner *vt)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -646,23 +645,22 @@ static int vidioc_s_tuner (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_frequency (struct file *file, void *priv,
+static int vidioc_g_frequency(struct file *file, void *priv,
 				struct v4l2_frequency *freq)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	freq->tuner = 0; /* Only one tuner */
-	if(usbvision->radio) {
+	if (usbvision->radio)
 		freq->type = V4L2_TUNER_RADIO;
-	} else {
+	else
 		freq->type = V4L2_TUNER_ANALOG_TV;
-	}
 	freq->frequency = usbvision->freq;
 
 	return 0;
 }
 
-static int vidioc_s_frequency (struct file *file, void *priv,
+static int vidioc_s_frequency(struct file *file, void *priv,
 				struct v4l2_frequency *freq)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -677,30 +675,27 @@ static int vidioc_s_frequency (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_audio (struct file *file, void *priv, struct v4l2_audio *a)
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	if(usbvision->radio) {
-		strcpy(a->name,"Radio");
-	} else {
+	if (usbvision->radio)
+		strcpy(a->name, "Radio");
+	else
 		strcpy(a->name, "TV");
-	}
 
 	return 0;
 }
 
-static int vidioc_s_audio (struct file *file, void *fh,
+static int vidioc_s_audio(struct file *file, void *fh,
 			  struct v4l2_audio *a)
 {
-	if(a->index) {
+	if (a->index)
 		return -EINVAL;
-	}
-
 	return 0;
 }
 
-static int vidioc_queryctrl (struct file *file, void *priv,
+static int vidioc_queryctrl(struct file *file, void *priv,
 			    struct v4l2_queryctrl *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -713,52 +708,53 @@ static int vidioc_queryctrl (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_ctrl (struct file *file, void *priv,
+static int vidioc_g_ctrl(struct file *file, void *priv,
 				struct v4l2_control *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	call_all(usbvision, core, g_ctrl, ctrl);
 
+	call_all(usbvision, core, g_ctrl, ctrl);
 	return 0;
 }
 
-static int vidioc_s_ctrl (struct file *file, void *priv,
+static int vidioc_s_ctrl(struct file *file, void *priv,
 				struct v4l2_control *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	call_all(usbvision, core, s_ctrl, ctrl);
 
+	call_all(usbvision, core, s_ctrl, ctrl);
 	return 0;
 }
 
-static int vidioc_reqbufs (struct file *file,
+static int vidioc_reqbufs(struct file *file,
 			   void *priv, struct v4l2_requestbuffers *vr)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
 
-	RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES);
+	RESTRICT_TO_RANGE(vr->count, 1, USBVISION_NUMFRAMES);
 
 	/* Check input validity:
 	   the user must do a VIDEO CAPTURE and MMAP method. */
 	if (vr->memory != V4L2_MEMORY_MMAP)
 		return -EINVAL;
 
-	if(usbvision->streaming == stream_on) {
-		if ((ret = usbvision_stream_interrupt(usbvision)))
+	if (usbvision->streaming == stream_on) {
+		ret = usbvision_stream_interrupt(usbvision);
+		if (ret)
 			return ret;
 	}
 
 	usbvision_frames_free(usbvision);
 	usbvision_empty_framequeues(usbvision);
-	vr->count = usbvision_frames_alloc(usbvision,vr->count);
+	vr->count = usbvision_frames_alloc(usbvision, vr->count);
 
 	usbvision->cur_frame = NULL;
 
 	return 0;
 }
 
-static int vidioc_querybuf (struct file *file,
+static int vidioc_querybuf(struct file *file,
 			    void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -766,48 +762,45 @@ static int vidioc_querybuf (struct file *file,
 
 	/* FIXME : must control
 	   that buffers are mapped (VIDIOC_REQBUFS has been called) */
-	if(vb->index>=usbvision->num_frames)  {
+	if (vb->index >= usbvision->num_frames)
 		return -EINVAL;
-	}
 	/* Updating the corresponding frame state */
 	vb->flags = 0;
 	frame = &usbvision->frame[vb->index];
-	if(frame->grabstate >= frame_state_ready)
+	if (frame->grabstate >= frame_state_ready)
 		vb->flags |= V4L2_BUF_FLAG_QUEUED;
-	if(frame->grabstate >= frame_state_done)
+	if (frame->grabstate >= frame_state_done)
 		vb->flags |= V4L2_BUF_FLAG_DONE;
-	if(frame->grabstate == frame_state_unused)
+	if (frame->grabstate == frame_state_unused)
 		vb->flags |= V4L2_BUF_FLAG_MAPPED;
 	vb->memory = V4L2_MEMORY_MMAP;
 
-	vb->m.offset = vb->index*PAGE_ALIGN(usbvision->max_frame_size);
+	vb->m.offset = vb->index * PAGE_ALIGN(usbvision->max_frame_size);
 
 	vb->memory = V4L2_MEMORY_MMAP;
 	vb->field = V4L2_FIELD_NONE;
-	vb->length = usbvision->curwidth*
-		usbvision->curheight*
+	vb->length = usbvision->curwidth *
+		usbvision->curheight *
 		usbvision->palette.bytes_per_pixel;
 	vb->timestamp = usbvision->frame[vb->index].timestamp;
 	vb->sequence = usbvision->frame[vb->index].sequence;
 	return 0;
 }
 
-static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	struct usbvision_frame *frame;
 	unsigned long lock_flags;
 
 	/* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */
-	if(vb->index>=usbvision->num_frames)  {
+	if (vb->index >= usbvision->num_frames)
 		return -EINVAL;
-	}
 
 	frame = &usbvision->frame[vb->index];
 
-	if (frame->grabstate != frame_state_unused) {
+	if (frame->grabstate != frame_state_unused)
 		return -EAGAIN;
-	}
 
 	/* Mark it as ready and enqueue frame */
 	frame->grabstate = frame_state_ready;
@@ -826,7 +819,7 @@ static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	return 0;
 }
 
-static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
@@ -882,7 +875,7 @@ static int vidioc_streamoff(struct file *file,
 	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	if(usbvision->streaming == stream_on) {
+	if (usbvision->streaming == stream_on) {
 		usbvision_stream_interrupt(usbvision);
 		/* Stop all video streamings */
 		call_all(usbvision, video, s_stream, 0);
@@ -892,18 +885,17 @@ static int vidioc_streamoff(struct file *file,
 	return 0;
 }
 
-static int vidioc_enum_fmt_vid_cap (struct file *file, void  *priv,
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 					struct v4l2_fmtdesc *vfd)
 {
-	if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
+	if (vfd->index >= USBVISION_SUPPORTED_PALETTES - 1)
 		return -EINVAL;
-	}
-	strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc);
+	strcpy(vfd->description, usbvision_v4l2_format[vfd->index].desc);
 	vfd->pixelformat = usbvision_v4l2_format[vfd->index].format;
 	return 0;
 }
 
-static int vidioc_g_fmt_vid_cap (struct file *file, void *priv,
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_format *vf)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -911,32 +903,31 @@ static int vidioc_g_fmt_vid_cap (struct file *file, void *priv,
 	vf->fmt.pix.height = usbvision->curheight;
 	vf->fmt.pix.pixelformat = usbvision->palette.format;
 	vf->fmt.pix.bytesperline =
-		usbvision->curwidth*usbvision->palette.bytes_per_pixel;
-	vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight;
+		usbvision->curwidth * usbvision->palette.bytes_per_pixel;
+	vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline * usbvision->curheight;
 	vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 	vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
 
 	return 0;
 }
 
-static int vidioc_try_fmt_vid_cap (struct file *file, void *priv,
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 			       struct v4l2_format *vf)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int format_idx;
 
 	/* Find requested format in available ones */
-	for(format_idx=0;format_idx<USBVISION_SUPPORTED_PALETTES;format_idx++) {
-		if(vf->fmt.pix.pixelformat ==
+	for (format_idx = 0; format_idx < USBVISION_SUPPORTED_PALETTES; format_idx++) {
+		if (vf->fmt.pix.pixelformat ==
 		   usbvision_v4l2_format[format_idx].format) {
 			usbvision->palette = usbvision_v4l2_format[format_idx];
 			break;
 		}
 	}
 	/* robustness */
-	if(format_idx == USBVISION_SUPPORTED_PALETTES) {
+	if (format_idx == USBVISION_SUPPORTED_PALETTES)
 		return -EINVAL;
-	}
 	RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
 	RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT);
 
@@ -953,13 +944,14 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
 
-	if( 0 != (ret=vidioc_try_fmt_vid_cap (file, priv, vf)) ) {
+	ret = vidioc_try_fmt_vid_cap(file, priv, vf);
+	if (ret)
 		return ret;
-	}
 
 	/* stop io in case it is already in progress */
-	if(usbvision->streaming == stream_on) {
-		if ((ret = usbvision_stream_interrupt(usbvision)))
+	if (usbvision->streaming == stream_on) {
+		ret = usbvision_stream_interrupt(usbvision);
+		if (ret)
 			return ret;
 	}
 	usbvision_frames_free(usbvision);
@@ -979,8 +971,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int noblock = file->f_flags & O_NONBLOCK;
 	unsigned long lock_flags;
-
-	int ret,i;
+	int ret, i;
 	struct usbvision_frame *frame;
 
 	PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__,
@@ -992,15 +983,15 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	/* This entry point is compatible with the mmap routines
 	   so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF
 	   to get frames or call read on the device. */
-	if(!usbvision->num_frames) {
+	if (!usbvision->num_frames) {
 		/* First, allocate some frames to work with
 		   if this has not been done with VIDIOC_REQBUF */
 		usbvision_frames_free(usbvision);
 		usbvision_empty_framequeues(usbvision);
-		usbvision_frames_alloc(usbvision,USBVISION_NUMFRAMES);
+		usbvision_frames_alloc(usbvision, USBVISION_NUMFRAMES);
 	}
 
-	if(usbvision->streaming != stream_on) {
+	if (usbvision->streaming != stream_on) {
 		/* no stream is running, make it running ! */
 		usbvision->streaming = stream_on;
 		call_all(usbvision, video, s_stream, 1);
@@ -1008,9 +999,9 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 
 	/* Then, enqueue as many frames as possible
 	   (like a user of VIDIOC_QBUF would do) */
-	for(i=0;i<usbvision->num_frames;i++) {
+	for (i = 0; i < usbvision->num_frames; i++) {
 		frame = &usbvision->frame[i];
-		if(frame->grabstate == frame_state_unused) {
+		if (frame->grabstate == frame_state_unused) {
 			/* Mark it as ready and enqueue frame */
 			frame->grabstate = frame_state_ready;
 			frame->scanstate = scan_state_scanning;
@@ -1029,7 +1020,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 
 	/* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
 	if (list_empty(&(usbvision->outqueue))) {
-		if(noblock)
+		if (noblock)
 			return -EAGAIN;
 
 		ret = wait_event_interruptible
@@ -1059,9 +1050,8 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	if ((count + frame->bytes_read) > (unsigned long)frame->scanlength)
 		count = frame->scanlength - frame->bytes_read;
 
-	if (copy_to_user(buf, frame->data + frame->bytes_read, count)) {
+	if (copy_to_user(buf, frame->data + frame->bytes_read, count))
 		return -EFAULT;
-	}
 
 	frame->bytes_read += count;
 	PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld",
@@ -1069,12 +1059,12 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	       (unsigned long)count, frame->bytes_read);
 
 	/* For now, forget the frame if it has not been read in one shot. */
-/* 	if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */
+/*	if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */
 		frame->bytes_read = 0;
 
 		/* Mark it as available to be used again. */
 		frame->grabstate = frame_state_unused;
-/* 	} */
+/*	} */
 
 	return count;
 }
@@ -1089,9 +1079,8 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 	PDEBUG(DBG_MMAP, "mmap");
 
-	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
+	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -EFAULT;
-	}
 
 	if (!(vma->vm_flags & VM_WRITE) ||
 	    size != PAGE_ALIGN(usbvision->max_frame_size)) {
@@ -1115,7 +1104,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 	pos = usbvision->frame[i].data;
 	while (size > 0) {
-
 		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
 			PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
 			return -EAGAIN;
@@ -1145,9 +1133,8 @@ static int usbvision_radio_open(struct file *file)
 			"%s: Someone tried to open an already opened USBVision Radio!\n",
 				__func__);
 		err_code = -EBUSY;
-	}
-	else {
-		if(power_on_at_open) {
+	} else {
+		if (power_on_at_open) {
 			usbvision_reset_power_off_timer(usbvision);
 			if (usbvision->power == 0) {
 				usbvision_power_on(usbvision);
@@ -1190,12 +1177,12 @@ static int usbvision_radio_close(struct file *file)
 	PDEBUG(DBG_IO, "");
 
 	/* Set packet size to 0 */
-	usbvision->iface_alt=0;
+	usbvision->iface_alt = 0;
 	err_code = usb_set_interface(usbvision->dev, usbvision->iface,
 				    usbvision->iface_alt);
 
 	usbvision_audio_off(usbvision);
-	usbvision->radio=0;
+	usbvision->radio = 0;
 	usbvision->user--;
 
 	if (power_on_at_open) {
@@ -1222,7 +1209,7 @@ static const struct v4l2_file_operations usbvision_fops = {
 	.read		= usbvision_v4l2_read,
 	.mmap		= usbvision_v4l2_mmap,
 	.unlocked_ioctl	= video_ioctl2,
-/* 	.poll          = video_poll, */
+/*	.poll		= video_poll, */
 };
 
 static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
@@ -1258,11 +1245,11 @@ static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 
 static struct video_device usbvision_video_template = {
 	.fops		= &usbvision_fops,
-	.ioctl_ops 	= &usbvision_ioctl_ops,
+	.ioctl_ops	= &usbvision_ioctl_ops,
 	.name           = "usbvision-video",
 	.release	= video_device_release,
-	.tvnorms              = USBVISION_NORMS,
-	.current_norm         = V4L2_STD_PAL
+	.tvnorms        = USBVISION_NORMS,
+	.current_norm   = V4L2_STD_PAL
 };
 
 
@@ -1292,9 +1279,9 @@ static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
 
 static struct video_device usbvision_radio_template = {
 	.fops		= &usbvision_radio_fops,
-	.name           = "usbvision-radio",
+	.name		= "usbvision-radio",
 	.release	= video_device_release,
-	.ioctl_ops 	= &usbvision_radio_ioctl_ops,
+	.ioctl_ops	= &usbvision_radio_ioctl_ops,
 
 	.tvnorms              = USBVISION_NORMS,
 	.current_norm         = V4L2_STD_PAL
@@ -1315,9 +1302,8 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
 	}
 
 	vdev = video_device_alloc();
-	if (NULL == vdev) {
+	if (NULL == vdev)
 		return NULL;
-	}
 	*vdev = *vdev_template;
 	vdev->lock = &usbvision->v4l2_lock;
 	vdev->v4l2_dev = &usbvision->v4l2_dev;
@@ -1333,11 +1319,10 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	if (usbvision->rdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->rdev));
-		if (video_is_registered(usbvision->rdev)) {
+		if (video_is_registered(usbvision->rdev))
 			video_unregister_device(usbvision->rdev);
-		} else {
+		else
 			video_device_release(usbvision->rdev);
-		}
 		usbvision->rdev = NULL;
 	}
 
@@ -1345,11 +1330,10 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 	if (usbvision->vdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->vdev));
-		if (video_is_registered(usbvision->vdev)) {
+		if (video_is_registered(usbvision->vdev))
 			video_unregister_device(usbvision->vdev);
-		} else {
+		else
 			video_device_release(usbvision->vdev);
-		}
 		usbvision->vdev = NULL;
 	}
 }
@@ -1361,14 +1345,10 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 	usbvision->vdev = usbvision_vdev_init(usbvision,
 					      &usbvision_video_template,
 					      "USBVision Video");
-	if (usbvision->vdev == NULL) {
+	if (usbvision->vdev == NULL)
 		goto err_exit;
-	}
-	if (video_register_device(usbvision->vdev,
-				  VFL_TYPE_GRABBER,
-				  video_nr)<0) {
+	if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
 		goto err_exit;
-	}
 	printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
 	       usbvision->nr, video_device_node_name(usbvision->vdev));
 
@@ -1378,14 +1358,10 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 		usbvision->rdev = usbvision_vdev_init(usbvision,
 						      &usbvision_radio_template,
 						      "USBVision Radio");
-		if (usbvision->rdev == NULL) {
+		if (usbvision->rdev == NULL)
 			goto err_exit;
-		}
-		if (video_register_device(usbvision->rdev,
-					  VFL_TYPE_RADIO,
-					  radio_nr)<0) {
+		if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr) < 0)
 			goto err_exit;
-		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
 		       usbvision->nr, video_device_node_name(usbvision->rdev));
 	}
@@ -1459,9 +1435,7 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
 
-	if (usbvision->ctrl_urb) {
-		usb_free_urb(usbvision->ctrl_urb);
-	}
+	usb_free_urb(usbvision->ctrl_urb);
 
 	v4l2_device_unregister(&usbvision->v4l2_dev);
 	kfree(usbvision);
@@ -1520,25 +1494,24 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	const struct usb_host_interface *interface;
 	struct usb_usbvision *usbvision = NULL;
 	const struct usb_endpoint_descriptor *endpoint;
-	int model,i;
+	int model, i;
 
 	PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u",
 				dev->descriptor.idVendor,
 				dev->descriptor.idProduct, ifnum);
 
 	model = devid->driver_info;
-	if ( (model<0) || (model>=usbvision_device_data_size) ) {
-		PDEBUG(DBG_PROBE, "model out of bounds %d",model);
+	if (model < 0 || model >= usbvision_device_data_size) {
+		PDEBUG(DBG_PROBE, "model out of bounds %d", model);
 		return -ENODEV;
 	}
 	printk(KERN_INFO "%s: %s found\n", __func__,
 				usbvision_device_data[model].model_string);
 
-	if (usbvision_device_data[model].interface >= 0) {
+	if (usbvision_device_data[model].interface >= 0)
 		interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
-	} else {
+	else
 		interface = &dev->actconfig->interface[ifnum]->altsetting[0];
-	}
 	endpoint = &interface->endpoint[1].desc;
 	if (!usb_endpoint_xfer_isoc(endpoint)) {
 		dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n",
@@ -1559,33 +1532,31 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
-	if (dev->descriptor.bNumConfigurations > 1) {
+	if (dev->descriptor.bNumConfigurations > 1)
 		usbvision->bridge_type = BRIDGE_NT1004;
-	} else if (model == DAZZLE_DVC_90_REV_1_SECAM) {
+	else if (model == DAZZLE_DVC_90_REV_1_SECAM)
 		usbvision->bridge_type = BRIDGE_NT1005;
-	} else {
+	else
 		usbvision->bridge_type = BRIDGE_NT1003;
-	}
 	PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type);
 
 	/* compute alternate max packet sizes */
 	uif = dev->actconfig->interface[0];
 
-	usbvision->num_alt=uif->num_altsetting;
-	PDEBUG(DBG_PROBE, "Alternate settings: %i",usbvision->num_alt);
-	usbvision->alt_max_pkt_size = kmalloc(32*
-					      usbvision->num_alt,GFP_KERNEL);
+	usbvision->num_alt = uif->num_altsetting;
+	PDEBUG(DBG_PROBE, "Alternate settings: %i", usbvision->num_alt);
+	usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL);
 	if (usbvision->alt_max_pkt_size == NULL) {
 		dev_err(&intf->dev, "usbvision: out of memory!\n");
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < usbvision->num_alt ; i++) {
+	for (i = 0; i < usbvision->num_alt; i++) {
 		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
 				      wMaxPacketSize);
 		usbvision->alt_max_pkt_size[i] =
 			(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-		PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i",i,
+		PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i", i,
 		       usbvision->alt_max_pkt_size[i]);
 	}
 
@@ -1593,9 +1564,8 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	usbvision->nr = usbvision_nr++;
 
 	usbvision->have_tuner = usbvision_device_data[model].tuner;
-	if (usbvision->have_tuner) {
+	if (usbvision->have_tuner)
 		usbvision->tuner_type = usbvision_device_data[model].tuner_type;
-	}
 
 	usbvision->dev_model = model;
 	usbvision->remove_pending = 0;
@@ -1689,7 +1659,7 @@ static int __init usbvision_init(void)
 	PDEBUG(DBG_MMAP, "MMAP    debugging is enabled [video]");
 
 	/* disable planar mode support unless compression enabled */
-	if (isoc_mode != ISOC_MODE_COMPRESS ) {
+	if (isoc_mode != ISOC_MODE_COMPRESS) {
 		/* FIXME : not the right way to set supported flag */
 		usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */
 		usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */
@@ -1706,10 +1676,10 @@ static int __init usbvision_init(void)
 
 static void __exit usbvision_exit(void)
 {
- PDEBUG(DBG_PROBE, "");
+	PDEBUG(DBG_PROBE, "");
 
- usb_deregister(&usbvision_driver);
- PDEBUG(DBG_PROBE, "success");
+	usb_deregister(&usbvision_driver);
+	PDEBUG(DBG_PROBE, "success");
 }
 
 module_init(usbvision_init);
diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h
index 514115930b4a..8074787fd1ac 100644
--- a/drivers/media/video/usbvision/usbvision.h
+++ b/drivers/media/video/usbvision/usbvision.h
@@ -139,7 +139,7 @@
 #define MAX_USB_HEIGHT			240  /* 288 */
 #define MAX_FRAME_HEIGHT		240  /* 288 */			/* Streching sometimes causes crashes*/
 
-#define MAX_FRAME_SIZE     		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
+#define MAX_FRAME_SIZE			(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
 #define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */
 
 #define USBVISION_URB_FRAMES		32
@@ -148,7 +148,7 @@
 #define USBVISION_NUMFRAMES		3  /* Maximum number of frames an application can get */
 #define USBVISION_NUMSBUF		2 /* Dimensioning the USB S buffering */
 
-#define USBVISION_POWEROFF_TIME		3 * (HZ)		/* 3 seconds */
+#define USBVISION_POWEROFF_TIME		(3 * HZ)		/* 3 seconds */
 
 
 #define FRAMERATE_MIN	0
@@ -161,7 +161,8 @@ enum {
 };
 
 /* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+#define RESTRICT_TO_RANGE(v, mi, ma) \
+	{ if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
 
 /*
  * We use macros to do YUV -> RGB conversion because this is
@@ -183,18 +184,18 @@ enum {
  * Make sure the output values are within [0..255] range.
  */
 #define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
-    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
-    mm_y = (my) - 16;  \
-    mm_u = (mu) - 128; \
-    mm_v = (mv) - 128; \
-    mm_yc= mm_y * 76284; \
-    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
-    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
-    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
-    mb = LIMIT_RGB(mm_b); \
-    mg = LIMIT_RGB(mm_g); \
-    mr = LIMIT_RGB(mm_r); \
+#define YUV_TO_RGB_BY_THE_BOOK(my, mu, mv, mr, mg, mb) { \
+	int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+	mm_y = (my) - 16; \
+	mm_u = (mu) - 128; \
+	mm_v = (mv) - 128; \
+	mm_yc = mm_y * 76284; \
+	mm_b = (mm_yc + 132252 * mm_v) >> 16; \
+	mm_g = (mm_yc - 53281 * mm_u - 25625 * mm_v) >> 16; \
+	mm_r = (mm_yc + 104595 * mm_u) >> 16; \
+	mb = LIMIT_RGB(mm_b); \
+	mg = LIMIT_RGB(mm_g); \
+	mr = LIMIT_RGB(mm_r); \
 }
 
 /* Debugging aid */
@@ -202,7 +203,7 @@ enum {
 	wait_queue_head_t wq; \
 	init_waitqueue_head(&wq); \
 	printk(KERN_INFO "Say: %s\n", what); \
-	interruptible_sleep_on_timeout (&wq, HZ*3); \
+	interruptible_sleep_on_timeout(&wq, HZ * 3); \
 }
 
 /*
@@ -265,8 +266,8 @@ struct usbvision_sbuf {
 	struct urb *urb;
 };
 
-#define USBVISION_MAGIC_1      			0x55
-#define USBVISION_MAGIC_2      			0xAA
+#define USBVISION_MAGIC_1			0x55
+#define USBVISION_MAGIC_2			0xAA
 #define USBVISION_HEADER_LENGTH			0x0c
 #define USBVISION_SAA7111_ADDR			0x48
 #define USBVISION_SAA7113_ADDR			0x4a
@@ -358,8 +359,8 @@ extern struct usb_device_id usbvision_table[];
 
 struct usb_usbvision {
 	struct v4l2_device v4l2_dev;
-	struct video_device *vdev;         				/* Video Device */
-	struct video_device *rdev;               			/* Radio Device */
+	struct video_device *vdev;					/* Video Device */
+	struct video_device *rdev;					/* Radio Device */
 
 	/* i2c Declaration Section*/
 	struct i2c_adapter i2c_adap;
@@ -401,7 +402,7 @@ struct usb_usbvision {
 	enum stream_state streaming;					/* Are we streaming Isochronous? */
 	int last_error;							/* What calamity struck us? */
 	int curwidth;							/* width of the frame the device is currently set to*/
-	int curheight;      						/* height of the frame the device is currently set to*/
+	int curheight;							/* height of the frame the device is currently set to*/
 	int stretch_width;						/* stretch-factor for frame width (from usb to screen)*/
 	int stretch_height;						/* stretch-factor for frame height (from usb to screen)*/
 	char *fbuf;							/* Videodev buffer area for mmap*/
@@ -434,7 +435,7 @@ struct usb_usbvision {
 
 	/* Decompression stuff: */
 	unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
-	int block_pos; 							/* for test only */
+	int block_pos;							/* for test only */
 	int request_intra;						/* 0 = normal; 1 = intra frame is requested; */
 	int last_isoc_frame_num;					/* check for lost isoc frames */
 	int isoc_packet_size;						/* need to calculate used_bandwidth */
@@ -494,7 +495,7 @@ void usbvision_scratch_free(struct usb_usbvision *usbvision);
 int usbvision_decompress_alloc(struct usb_usbvision *usbvision);
 void usbvision_decompress_free(struct usb_usbvision *usbvision);
 
-int usbvision_setup(struct usb_usbvision *usbvision,int format);
+int usbvision_setup(struct usb_usbvision *usbvision, int format);
 int usbvision_init_isoc(struct usb_usbvision *usbvision);
 int usbvision_restart_isoc(struct usb_usbvision *usbvision);
 void usbvision_stop_isoc(struct usb_usbvision *usbvision);
-- 
cgit v1.2.3


From 513521eaee4375a1a0da0b73c7131a165a9fe4d9 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 14:25:52 -0300
Subject: [media] v4l2-ctrls: use const char * const * for the menu arrays

This prevents checkpatch warnings generated when defining
'static const char *foo[]' arrays. It makes sense to use
const char * const * anyway since the pointers in the array
are indeed const.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-controls.c           |  2 +-
 drivers/media/video/cx2341x.c                      |  8 ++--
 drivers/media/video/pvrusb2/pvrusb2-ctrl.c         |  6 +--
 drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h |  2 +-
 drivers/media/video/v4l2-common.c                  |  6 +--
 drivers/media/video/v4l2-ctrls.c                   | 46 +++++++++++-----------
 6 files changed, 35 insertions(+), 35 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 67043c7b452b..97d7b7e100a3 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -108,7 +108,7 @@ static int cx18_try_ctrl(struct file *file, void *fh,
 					struct v4l2_ext_control *vctrl)
 {
 	struct v4l2_queryctrl qctrl;
-	const char **menu_items = NULL;
+	const char * const *menu_items = NULL;
 	int err;
 
 	qctrl.id = vctrl->id;
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index e5c3c8da4be3..103ef6bad2e2 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -853,9 +853,9 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 }
 EXPORT_SYMBOL(cx2341x_ctrl_query);
 
-const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
 {
-	static const char *mpeg_stream_type_without_ts[] = {
+	static const char * const mpeg_stream_type_without_ts[] = {
 		"MPEG-2 Program Stream",
 		"",
 		"MPEG-1 System Stream",
@@ -952,7 +952,7 @@ int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
 	for (i = 0; i < ctrls->count; i++) {
 		struct v4l2_ext_control *ctrl = ctrls->controls + i;
 		struct v4l2_queryctrl qctrl;
-		const char **menu_items = NULL;
+		const char * const *menu_items = NULL;
 
 		qctrl.id = ctrl->id;
 		err = cx2341x_ctrl_query(params, &qctrl);
@@ -1135,7 +1135,7 @@ EXPORT_SYMBOL(cx2341x_update);
 
 static const char *cx2341x_menu_item(const struct cx2341x_mpeg_params *p, u32 id)
 {
-	const char **menu = cx2341x_ctrl_get_menu(p, id);
+	const char * const *menu = cx2341x_ctrl_get_menu(p, id);
 	struct v4l2_ext_control ctrl;
 
 	if (menu == NULL)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 55ea914c7fcd..7d5a7139a45a 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -203,7 +203,7 @@ int pvr2_ctrl_get_valname(struct pvr2_ctrl *cptr,int val,
 	*blen = 0;
 	LOCK_TAKE(cptr->hdw->big_lock); do {
 		if (cptr->info->type == pvr2_ctl_enum) {
-			const char **names;
+			const char * const *names;
 			names = cptr->info->def.type_enum.value_names;
 			if (pvr2_ctrl_range_check(cptr,val) == 0) {
 				if (names[val]) {
@@ -367,7 +367,7 @@ static const char *boolNames[] = {
 
 static int parse_token(const char *ptr,unsigned int len,
 		       int *valptr,
-		       const char **names,unsigned int namecnt)
+		       const char * const *names, unsigned int namecnt)
 {
 	char buf[33];
 	unsigned int slen;
@@ -559,7 +559,7 @@ int pvr2_ctrl_value_to_sym_internal(struct pvr2_ctrl *cptr,
 		*len = scnprintf(buf,maxlen,"%s",val ? "true" : "false");
 		ret = 0;
 	} else if (cptr->info->type == pvr2_ctl_enum) {
-		const char **names;
+		const char * const *names;
 		names = cptr->info->def.type_enum.value_names;
 		if ((val >= 0) &&
 		    (val < cptr->info->def.type_enum.count)) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index cb4057bb07a0..ac94a8bf883e 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -115,7 +115,7 @@ struct pvr2_ctl_info {
 		} type_int;
 		struct { /* enumerated control */
 			unsigned int count;       /* enum value count */
-			const char **value_names; /* symbol names */
+			const char * const *value_names; /* symbol names */
 		} type_enum;
 		struct { /* bitmask control */
 			unsigned int valid_bits; /* bits in use */
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index b5eb1f3950b1..3f0871b550ad 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -150,7 +150,7 @@ EXPORT_SYMBOL(v4l2_prio_check);
    struct v4l2_queryctrl and the available menu items. Note that
    menu_items may be NULL, in that case it is ignored. */
 int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
-		const char **menu_items)
+		const char * const *menu_items)
 {
 	if (qctrl->flags & V4L2_CTRL_FLAG_DISABLED)
 		return -EINVAL;
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(v4l2_ctrl_query_fill);
    If menu_items is NULL, then the menu items are retrieved using
    v4l2_ctrl_get_menu. */
 int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl,
-	       const char **menu_items)
+	       const char * const *menu_items)
 {
 	int i;
 
@@ -222,7 +222,7 @@ EXPORT_SYMBOL(v4l2_ctrl_query_menu);
    Use this if there are 'holes' in the list of valid menu items. */
 int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids)
 {
-	const char **menu_items = v4l2_ctrl_get_menu(qmenu->id);
+	const char * const *menu_items = v4l2_ctrl_get_menu(qmenu->id);
 
 	qmenu->reserved = 0;
 	if (menu_items == NULL || ids == NULL)
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 9d2502cd03ff..6c0fadc2beab 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -38,15 +38,15 @@ struct ctrl_helper {
    the given control ID. The pointer array ends with a NULL pointer.
    An empty string signifies a menu entry that is invalid. This allows
    drivers to disable certain options if it is not supported. */
-const char **v4l2_ctrl_get_menu(u32 id)
+const char * const *v4l2_ctrl_get_menu(u32 id)
 {
-	static const char *mpeg_audio_sampling_freq[] = {
+	static const char * const mpeg_audio_sampling_freq[] = {
 		"44.1 kHz",
 		"48 kHz",
 		"32 kHz",
 		NULL
 	};
-	static const char *mpeg_audio_encoding[] = {
+	static const char * const mpeg_audio_encoding[] = {
 		"MPEG-1/2 Layer I",
 		"MPEG-1/2 Layer II",
 		"MPEG-1/2 Layer III",
@@ -54,7 +54,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"AC-3",
 		NULL
 	};
-	static const char *mpeg_audio_l1_bitrate[] = {
+	static const char * const mpeg_audio_l1_bitrate[] = {
 		"32 kbps",
 		"64 kbps",
 		"96 kbps",
@@ -71,7 +71,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"448 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_l2_bitrate[] = {
+	static const char * const mpeg_audio_l2_bitrate[] = {
 		"32 kbps",
 		"48 kbps",
 		"56 kbps",
@@ -88,7 +88,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"384 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_l3_bitrate[] = {
+	static const char * const mpeg_audio_l3_bitrate[] = {
 		"32 kbps",
 		"40 kbps",
 		"48 kbps",
@@ -105,7 +105,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"320 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_ac3_bitrate[] = {
+	static const char * const mpeg_audio_ac3_bitrate[] = {
 		"32 kbps",
 		"40 kbps",
 		"48 kbps",
@@ -127,50 +127,50 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"640 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_mode[] = {
+	static const char * const mpeg_audio_mode[] = {
 		"Stereo",
 		"Joint Stereo",
 		"Dual",
 		"Mono",
 		NULL
 	};
-	static const char *mpeg_audio_mode_extension[] = {
+	static const char * const mpeg_audio_mode_extension[] = {
 		"Bound 4",
 		"Bound 8",
 		"Bound 12",
 		"Bound 16",
 		NULL
 	};
-	static const char *mpeg_audio_emphasis[] = {
+	static const char * const mpeg_audio_emphasis[] = {
 		"No Emphasis",
 		"50/15 us",
 		"CCITT J17",
 		NULL
 	};
-	static const char *mpeg_audio_crc[] = {
+	static const char * const mpeg_audio_crc[] = {
 		"No CRC",
 		"16-bit CRC",
 		NULL
 	};
-	static const char *mpeg_video_encoding[] = {
+	static const char * const mpeg_video_encoding[] = {
 		"MPEG-1",
 		"MPEG-2",
 		"MPEG-4 AVC",
 		NULL
 	};
-	static const char *mpeg_video_aspect[] = {
+	static const char * const mpeg_video_aspect[] = {
 		"1x1",
 		"4x3",
 		"16x9",
 		"2.21x1",
 		NULL
 	};
-	static const char *mpeg_video_bitrate_mode[] = {
+	static const char * const mpeg_video_bitrate_mode[] = {
 		"Variable Bitrate",
 		"Constant Bitrate",
 		NULL
 	};
-	static const char *mpeg_stream_type[] = {
+	static const char * const mpeg_stream_type[] = {
 		"MPEG-2 Program Stream",
 		"MPEG-2 Transport Stream",
 		"MPEG-1 System Stream",
@@ -179,25 +179,25 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"MPEG-2 SVCD-compatible Stream",
 		NULL
 	};
-	static const char *mpeg_stream_vbi_fmt[] = {
+	static const char * const mpeg_stream_vbi_fmt[] = {
 		"No VBI",
 		"Private packet, IVTV format",
 		NULL
 	};
-	static const char *camera_power_line_frequency[] = {
+	static const char * const camera_power_line_frequency[] = {
 		"Disabled",
 		"50 Hz",
 		"60 Hz",
 		NULL
 	};
-	static const char *camera_exposure_auto[] = {
+	static const char * const camera_exposure_auto[] = {
 		"Auto Mode",
 		"Manual Mode",
 		"Shutter Priority Mode",
 		"Aperture Priority Mode",
 		NULL
 	};
-	static const char *colorfx[] = {
+	static const char * const colorfx[] = {
 		"None",
 		"Black & White",
 		"Sepia",
@@ -210,7 +210,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"Vivid",
 		NULL
 	};
-	static const char *tune_preemphasis[] = {
+	static const char * const tune_preemphasis[] = {
 		"No preemphasis",
 		"50 useconds",
 		"75 useconds",
@@ -952,7 +952,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, const char *name, enum v4l2_ctrl_type type,
 			s32 min, s32 max, u32 step, s32 def,
-			u32 flags, const char **qmenu, void *priv)
+			u32 flags, const char * const *qmenu, void *priv)
 {
 	struct v4l2_ctrl *ctrl;
 	unsigned sz_extra = 0;
@@ -1019,7 +1019,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
 	bool is_menu;
 	struct v4l2_ctrl *ctrl;
 	const char *name = cfg->name;
-	const char **qmenu = cfg->qmenu;
+	const char * const *qmenu = cfg->qmenu;
 	enum v4l2_ctrl_type type = cfg->type;
 	u32 flags = cfg->flags;
 	s32 min = cfg->min;
@@ -1075,7 +1075,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 mask, s32 def)
 {
-	const char **qmenu = v4l2_ctrl_get_menu(id);
+	const char * const *qmenu = v4l2_ctrl_get_menu(id);
 	const char *name;
 	enum v4l2_ctrl_type type;
 	s32 min;
-- 
cgit v1.2.3


From 02ac04805e6a753610d7dd1716181ccbd8e366af Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 14:27:05 -0300
Subject: [media] v4l2-ctrls: only check def for menu, integer and boolean
 controls

The 'def' field is only valid for menus, integers and booleans.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ctrls.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 6c0fadc2beab..8f81efcfcf56 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -962,13 +962,20 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 
 	/* Sanity checks */
 	if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
-	    def < min || def > max || max < min ||
+	    max < min ||
 	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
 	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
 	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if ((type == V4L2_CTRL_TYPE_INTEGER ||
+	     type == V4L2_CTRL_TYPE_MENU ||
+	     type == V4L2_CTRL_TYPE_BOOLEAN) &&
+	    (def < min || def > max)) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 
 	if (type == V4L2_CTRL_TYPE_BUTTON)
 		flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
-- 
cgit v1.2.3


From 3ea2b673a55cee528f83653e711d09425ed4d8b6 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 14:28:13 -0300
Subject: [media] em28xx: fix incorrect s_ctrl error code and wrong call to
 res_free

Calling subdevs to handle s_ctrl returned a non-zero return code even if
everything went fine.

Calling STREAMOFF if no STREAMON happened earlier would hit a BUG_ON
in res_free.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 7be9bbad79ba..37b48a26c02a 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1434,7 +1434,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 	/* It isn't an AC97 control. Sends it to the v4l2 dev interface */
 	if (rc == 1) {
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
+		rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
 
 		/*
 		 * In the case of non-AC97 volume controls, we still need
@@ -1708,11 +1708,15 @@ static int vidioc_streamoff(struct file *file, void *priv,
 			fh, type, fh->resources, dev->resources);
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		videobuf_streamoff(&fh->vb_vidq);
-		res_free(fh, EM28XX_RESOURCE_VIDEO);
+		if (res_check(fh, EM28XX_RESOURCE_VIDEO)) {
+			videobuf_streamoff(&fh->vb_vidq);
+			res_free(fh, EM28XX_RESOURCE_VIDEO);
+		}
 	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-		videobuf_streamoff(&fh->vb_vbiq);
-		res_free(fh, EM28XX_RESOURCE_VBI);
+		if (res_check(fh, EM28XX_RESOURCE_VBI)) {
+			videobuf_streamoff(&fh->vb_vbiq);
+			res_free(fh, EM28XX_RESOURCE_VBI);
+		}
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 657f2271050beabe725ba101c1d840f51a41f33d Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 14:29:55 -0300
Subject: [media] v4l: fix handling of v4l2_input.capabilities

The v4l core sets the v4l2_input.capabilities field based on the supplied
v4l2_ioctl_ops. However, several drivers do a memset or memcpy of the v4l2_input
struct, thus overwriting that field incorrectly.

Either remove the memset (which is already done by the v4l core), or add the
proper capabilities field in case of a memcpy.

The same is also true for v4l2_output, but that only affected the ivtv driver.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ttpci/av7110_v4l.c         |  4 ++++
 drivers/media/dvb/ttpci/budget-av.c          |  6 ++++--
 drivers/media/video/cx18/cx18-cards.c        |  1 -
 drivers/media/video/cx23885/cx23885-video.c  |  1 -
 drivers/media/video/et61x251/et61x251_core.c |  1 +
 drivers/media/video/hexium_gemini.c          | 18 +++++++++---------
 drivers/media/video/hexium_orion.c           | 18 +++++++++---------
 drivers/media/video/ivtv/ivtv-cards.c        |  2 --
 drivers/media/video/mxb.c                    |  8 ++++----
 drivers/media/video/saa7134/saa7134-video.c  |  1 -
 drivers/media/video/sn9c102/sn9c102_core.c   |  1 +
 drivers/media/video/timblogiw.c              |  1 -
 drivers/media/video/vino.c                   |  3 ---
 drivers/media/video/zoran/zoran_driver.c     |  6 ------
 14 files changed, 32 insertions(+), 39 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index ac20c5bbfa43..cdd31cae46c4 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -100,6 +100,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0, /* ignored */
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 1,
 		.name		= "Television",
@@ -108,6 +109,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 2,
 		.name		= "Video",
@@ -116,6 +118,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 3,
 		.name		= "Y/C",
@@ -124,6 +127,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}
 };
 
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 97afc01f60d0..e957d7690bcc 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1406,8 +1406,10 @@ static int budget_av_detach(struct saa7146_dev *dev)
 
 #define KNC1_INPUTS 2
 static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
-	{0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
-	{1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+	{ 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 52ba913b5af8..87177733cf92 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -546,7 +546,6 @@ int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input)
 		"Component 1"
 	};
 
-	memset(input, 0, sizeof(*input));
 	if (index >= cx->nof_inputs)
 		return -EINVAL;
 	input->index = index;
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 796a797b5205..644fcb808c0b 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1126,7 +1126,6 @@ static int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
 	if (0 == INPUT(n)->type)
 		return -EINVAL;
 
-	memset(i, 0, sizeof(*i));
 	i->index = n;
 	i->type  = V4L2_INPUT_TYPE_CAMERA;
 	strcpy(i->name, iname[INPUT(n)->type]);
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index bb164099ea2c..a982750dcef1 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1610,6 +1610,7 @@ et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
 	memset(&i, 0, sizeof(i));
 	strcpy(i.name, "Camera");
 	i.type = V4L2_INPUT_TYPE_CAMERA;
+	i.capabilities = V4L2_IN_CAP_STD;
 
 	if (copy_to_user(arg, &i, sizeof(i)))
 		return -EFAULT;
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 7ae96367b3ab..cdf8b191f710 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -37,15 +37,15 @@ static int hexium_num;
 
 #define HEXIUM_INPUTS	9
 static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 #define HEXIUM_AUDIOS	0
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index b72d0f0b8310..6ad7e1c8b922 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -38,15 +38,15 @@ static int hexium_num;
 
 #define HEXIUM_INPUTS	9
 static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 #define HEXIUM_AUDIOS	0
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index 87afbbee2063..b6f2a2b42283 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -1313,7 +1313,6 @@ int ivtv_get_input(struct ivtv *itv, u16 index, struct v4l2_input *input)
 		"Composite 3"
 	};
 
-	memset(input, 0, sizeof(*input));
 	if (index >= itv->nof_inputs)
 		return -EINVAL;
 	input->index = index;
@@ -1331,7 +1330,6 @@ int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output)
 {
 	const struct ivtv_card_output *card_output = itv->card->video_outputs + index;
 
-	memset(output, 0, sizeof(*output));
 	if (index >= itv->card->nof_outputs)
 		return -EINVAL;
 	output->index = index;
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 4e8fd965f151..e8846a09b026 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -59,10 +59,10 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 enum { TUNER, AUX1, AUX3, AUX3_YC };
 
 static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
-	{ TUNER,	"Tuner",		V4L2_INPUT_TYPE_TUNER,	1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX1,		"AUX1",			V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX3,		"AUX3 Composite",	V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX3_YC,	"AUX3 S-Video",		V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ TUNER,	"Tuner",		V4L2_INPUT_TYPE_TUNER,	1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX1,		"AUX1",			V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX3,		"AUX3 Composite",	V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX3_YC,	"AUX3 S-Video",		V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 /* this array holds the information, which port of the saa7146 each
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index ee4ea5f001a8..776ba2dd7f9f 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1748,7 +1748,6 @@ static int saa7134_enum_input(struct file *file, void *priv,
 		return -EINVAL;
 	if (NULL == card_in(dev, i->index).name)
 		return -EINVAL;
-	memset(i, 0, sizeof(*i));
 	i->index = n;
 	i->type  = V4L2_INPUT_TYPE_CAMERA;
 	strcpy(i->name, card_in(dev, n).name);
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index f49fbfb7dc13..84984f64b234 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -2189,6 +2189,7 @@ sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
 	memset(&i, 0, sizeof(i));
 	strcpy(i.name, "Camera");
 	i.type = V4L2_INPUT_TYPE_CAMERA;
+	i.capabilities = V4L2_IN_CAP_STD;
 
 	if (copy_to_user(arg, &i, sizeof(i)))
 		return -EFAULT;
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index 700c08aca6c6..c2fcab465dfc 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -369,7 +369,6 @@ static int timblogiw_enuminput(struct file *file, void  *priv,
 	if (inp->index != 0)
 		return -EINVAL;
 
-	memset(inp, 0, sizeof(*inp));
 	inp->index = 0;
 
 	strncpy(inp->name, "Timb input 1", sizeof(inp->name) - 1);
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 7e7eec48f8b1..d63e9d978493 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -2954,9 +2954,6 @@ static int vino_enum_input(struct file *file, void *__fh,
 	if (input == VINO_INPUT_NONE)
 		return -EINVAL;
 
-	memset(i, 0, sizeof(struct v4l2_input));
-
-	i->index = index;
 	i->type = V4L2_INPUT_TYPE_CAMERA;
 	i->std = vino_inputs[input].std;
 	strcpy(i->name, vino_inputs[input].name);
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 1b67b1914038..fe84f17c65c4 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2449,11 +2449,6 @@ static int zoran_enum_input(struct file *file, void *__fh,
 
 	if (inp->index >= zr->card.inputs)
 		return -EINVAL;
-	else {
-		int id = inp->index;
-		memset(inp, 0, sizeof(*inp));
-		inp->index = id;
-	}
 
 	strncpy(inp->name, zr->card.input[inp->index].name,
 		sizeof(inp->name) - 1);
@@ -2503,7 +2498,6 @@ static int zoran_enum_output(struct file *file, void *__fh,
 	if (outp->index != 0)
 		return -EINVAL;
 
-	memset(outp, 0, sizeof(*outp));
 	outp->index = 0;
 	outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY;
 	strncpy(outp->name, "Autodetect", sizeof(outp->name)-1);
-- 
cgit v1.2.3


From 61ea3aa5bf309333c6655ccef825b4a765bff219 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 29 Dec 2010 14:38:44 -0300
Subject: [media] timblogiw: fix compile warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix 64-bit compile warning:

drivers/media/video/timblogiw.c: In function ‘timblogiw_dma_filter_fn’:
drivers/media/video/timblogiw.c:151: warning: cast from pointer to integer of different size
drivers/media/video/timblogiw.c: In function ‘timblogiw_open’:
drivers/media/video/timblogiw.c:670: warning: cast to pointer from integer of different size

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Richard Rojförs <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/timblogiw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index c2fcab465dfc..fc611ebeb82c 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -148,7 +148,7 @@ static void timblogiw_dma_cb(void *data)
 
 static bool timblogiw_dma_filter_fn(struct dma_chan *chan, void *filter_param)
 {
-	return chan->chan_id == (int)filter_param;
+	return chan->chan_id == (uintptr_t)filter_param;
 }
 
 /* IOCTL functions */
@@ -668,7 +668,7 @@ static int timblogiw_open(struct file *file)
 
 	/* find the DMA channel */
 	fh->chan = dma_request_channel(mask, timblogiw_dma_filter_fn,
-			(void *)lw->pdata.dma_channel);
+			(void *)(uintptr_t)lw->pdata.dma_channel);
 	if (!fh->chan) {
 		dev_err(&vdev->dev, "Failed to get DMA channel\n");
 		kfree(fh);
-- 
cgit v1.2.3


From b22374544b981b82f7319a02e6b718fc796e9cfa Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 08:01:01 -0300
Subject: [media] bttv-input: Add a note about PV951 RC

When comparing lirc-i2c and ir-kbd-i2c/bttv-input logic, a difference
was noticed. As lirc-i2c will be removed soon, store the difference on
a comment inside ir-kbd-i2c, in order to preserve the knowledge we
have about that remote controller.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-input.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 7f48306133be..97793b960600 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -354,6 +354,18 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		return 0;
 	dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
 
+	/*
+	 * NOTE:
+	 * lirc_i2c maps the pv951 code as:
+	 *	addr = 0x61D6
+	 * 	cmd = bit_reverse (b)
+	 * So, it seems that this device uses NEC extended
+	 * I decided to not fix the table, due to two reasons:
+	 * 	1) Without the actual device, this is only a guess;
+	 * 	2) As the addr is not reported via I2C, nor can be changed,
+	 * 	   the device is bound to the vendor-provided RC.
+	 */
+
 	*ir_key = b;
 	*ir_raw = b;
 	return 1;
-- 
cgit v1.2.3


From 1c0eb0ffb0d541bf05a4b422a629fa5986799313 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 08:02:51 -0300
Subject: [media] cx88: Add RC logic for Leadtek PVR 2000

Currently, lirc-i2c has a decoding logic for Leadtek Remote
Control. Move it to cx88, as we intend to remove lirc-i2c.

For now, initialize LIRC remote keytable with RC_MAP_EMPTY, as
we don't know its keymap yet. It would be nice to later check
if is there any file on LIRC userspace with that keytable.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-input.c | 49 ++++++++++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 4a3bf5476c71..06f7d1d00944 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -68,6 +68,9 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 #define ir_dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s IR: " fmt , ir->core->name , ##arg)
 
+#define dprintk(fmt, arg...)	if (ir_debug) \
+	printk(KERN_DEBUG "cx88 IR: " fmt , ##arg)
+
 /* ---------------------------------------------------------------------- */
 
 static void cx88_ir_handle_key(struct cx88_IR *ir)
@@ -527,13 +530,47 @@ void cx88_ir_irq(struct cx88_core *core)
 	ir_raw_event_handle(ir->dev);
 }
 
+static int get_key_pvr2000(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	int flags, code;
+
+	/* poll IR chip */
+	flags = i2c_smbus_read_byte_data(ir->c, 0x10);
+	if (flags < 0) {
+		dprintk("read error\n");
+		return 0;
+	}
+	/* key pressed ? */
+	if (0 == (flags & 0x80))
+		return 0;
+
+	/* read actual key code */
+	code = i2c_smbus_read_byte_data(ir->c, 0x00);
+	if (code < 0) {
+		dprintk("read error\n");
+		return 0;
+	}
+
+	dprintk("IR Key/Flags: (0x%02x/0x%02x)\n",
+		   code & 0xff, flags & 0xff);
+
+	*ir_key = code & 0xff;
+	*ir_raw = code;
+	return 1;
+}
+
 void cx88_i2c_init_ir(struct cx88_core *core)
 {
 	struct i2c_board_info info;
-	const unsigned short addr_list[] = {
+	const unsigned short default_addr_list[] = {
 		0x18, 0x6b, 0x71,
 		I2C_CLIENT_END
 	};
+	const unsigned short pvr2000_addr_list[] = {
+		0x18, 0x1a,
+		I2C_CLIENT_END
+	};
+	const unsigned short *addr_list = default_addr_list;
 	const unsigned short *addrp;
 	/* Instantiate the IR receiver device, if present */
 	if (0 != core->i2c_rc)
@@ -542,6 +579,16 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 
+	switch (core->boardnr) {
+	case CX88_BOARD_LEADTEK_PVR2000:
+		addr_list = pvr2000_addr_list;
+		core->init_data.name = "cx88 Leadtek PVR 2000 remote";
+		core->init_data.type = RC_TYPE_UNKNOWN;
+		core->init_data.get_key = get_key_pvr2000;
+		core->init_data.ir_codes = RC_MAP_EMPTY;
+		break;
+	}
+
 	/*
 	 * We can't call i2c_new_probed_device() because it uses
 	 * quick writes for probing and at least some RC receiver
-- 
cgit v1.2.3


From e1e2c57565635310209566a31a300e593f74cc22 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 08:31:10 -0300
Subject: [media] ivtv: Add Adaptec Remote Controller

lirc-i2c implements a get key logic for the Adaptec Remote
Controller, at address 0x6b. The only driver that seems to have
an Adaptec device is ivtv:

$ git grep -i adaptec drivers/media
drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver.
drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson
drivers/media/video/cs53l32a.c:   /* Set cs53l32a internal register for Adaptec 2010/2410 setup */
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */
drivers/media/video/ivtv/ivtv-cards.c:    { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 },
drivers/media/video/ivtv/ivtv-cards.c:    .name = "Adaptec VideOh! AVC-2410",
drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */
drivers/media/video/ivtv/ivtv-cards.c:    { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 },
drivers/media/video/ivtv/ivtv-cards.c:    .name = "Adaptec VideOh! AVC-2010",
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410         7 /* Adaptec AVC-2410 */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010         8 /* Adaptec AVD-2010 (No Tuner) */
drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC                 0x9005
drivers/media/video/ivtv/ivtv-driver.c:            "\t\t\t 8 = Adaptec AVC-2410\n"
drivers/media/video/ivtv/ivtv-driver.c:            "\t\t\t 9 = Adaptec AVC-2010\n"
drivers/media/video/ivtv/ivtv-i2c.c:              0x6b,   /* Adaptec IR */

There are two Adaptec cards defined there, but AVC-2010 doesn't have a
remote controller. So, the logic at lirc_i2c seems to be for Adaptec AVC-2410.

As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and
use it for AVC-2410.

Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-cards.c |  3 ++-
 drivers/media/video/ivtv/ivtv-cards.h |  4 +++-
 drivers/media/video/ivtv/ivtv-i2c.c   | 36 ++++++++++++++++++++++++++++++++++-
 3 files changed, 40 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index b6f2a2b42283..145e4749a69d 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -405,7 +405,8 @@ static const struct ivtv_card ivtv_card_avc2410 = {
 	.hw_audio_ctrl = IVTV_HW_MSP34XX,
 	.hw_muxer = IVTV_HW_CS53L32A,
 	.hw_all = IVTV_HW_MSP34XX | IVTV_HW_CS53L32A |
-		  IVTV_HW_SAA7115 | IVTV_HW_TUNER,
+		  IVTV_HW_SAA7115 | IVTV_HW_TUNER |
+		  IVTV_HW_I2C_IR_RX_ADAPTEC,
 	.video_inputs = {
 		{ IVTV_CARD_INPUT_VID_TUNER,  0, IVTV_SAA71XX_COMPOSITE4 },
 		{ IVTV_CARD_INPUT_SVIDEO1,    1, IVTV_SAA71XX_SVIDEO0    },
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index 78eca992e1fd..e6f5c02981f1 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -111,6 +111,7 @@
 #define IVTV_HW_I2C_IR_RX_HAUP_INT	(1 << 18)
 #define IVTV_HW_Z8F0811_IR_TX_HAUP	(1 << 19)
 #define IVTV_HW_Z8F0811_IR_RX_HAUP	(1 << 20)
+#define IVTV_HW_I2C_IR_RX_ADAPTEC	(1 << 21)
 
 #define IVTV_HW_Z8F0811_IR_HAUP	(IVTV_HW_Z8F0811_IR_RX_HAUP | \
 				 IVTV_HW_Z8F0811_IR_TX_HAUP)
@@ -120,7 +121,8 @@
 #define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \
 			   IVTV_HW_I2C_IR_RX_HAUP_EXT | \
 			   IVTV_HW_I2C_IR_RX_HAUP_INT | \
-			   IVTV_HW_Z8F0811_IR_RX_HAUP)
+			   IVTV_HW_Z8F0811_IR_RX_HAUP | \
+			   IVTV_HW_I2C_IR_RX_ADAPTEC)
 
 #define IVTV_HW_IR_TX_ANY (IVTV_HW_Z8F0811_IR_TX_HAUP)
 
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 68170924448c..bf0d35affe0b 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -94,6 +94,7 @@
 #define IVTV_HAUP_INT_IR_RX_I2C_ADDR 	0x18
 #define IVTV_Z8F0811_IR_TX_I2C_ADDR	0x70
 #define IVTV_Z8F0811_IR_RX_I2C_ADDR	0x71
+#define IVTV_ADAPTEC_IR_ADDR		0x6b
 
 /* This array should match the IVTV_HW_ defines */
 static const u8 hw_addrs[] = {
@@ -118,6 +119,7 @@ static const u8 hw_addrs[] = {
 	IVTV_HAUP_INT_IR_RX_I2C_ADDR,	/* IVTV_HW_I2C_IR_RX_HAUP_INT */
 	IVTV_Z8F0811_IR_TX_I2C_ADDR,	/* IVTV_HW_Z8F0811_IR_TX_HAUP */
 	IVTV_Z8F0811_IR_RX_I2C_ADDR,	/* IVTV_HW_Z8F0811_IR_RX_HAUP */
+	IVTV_ADAPTEC_IR_ADDR,		/* IVTV_HW_I2C_IR_RX_ADAPTEC */
 };
 
 /* This array should match the IVTV_HW_ defines */
@@ -143,8 +145,34 @@ static const char * const hw_devicenames[] = {
 	"ir_video",		/* IVTV_HW_I2C_IR_RX_HAUP_INT */
 	"ir_tx_z8f0811_haup",	/* IVTV_HW_Z8F0811_IR_TX_HAUP */
 	"ir_rx_z8f0811_haup",	/* IVTV_HW_Z8F0811_IR_RX_HAUP */
+	"ir_video",		/* IVTV_HW_I2C_IR_RX_ADAPTEC */
 };
 
+static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	unsigned char keybuf[4];
+
+	keybuf[0] = 0x00;
+	i2c_master_send(ir->c, keybuf, 1);
+	/* poll IR chip */
+	if (i2c_master_recv(ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
+		return 0;
+	}
+
+	/* key pressed ? */
+	if (keybuf[2] == 0xff)
+		return 0;
+
+	/* remove repeat bit */
+	keybuf[2] &= 0x7f;
+	keybuf[3] |= 0x80;
+
+	*ir_key = (u32) keybuf;
+	*ir_raw = (u32) keybuf;
+
+	return 1;
+}
+
 static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 {
 	struct i2c_board_info info;
@@ -190,6 +218,13 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		init_data->type = RC_TYPE_RC5;
 		init_data->name = itv->card_name;
 		break;
+	case IVTV_HW_I2C_IR_RX_ADAPTEC:
+		init_data->get_key = get_key_adaptec;
+		init_data->name = itv->card_name;
+		/* FIXME: The protocol and RC_MAP needs to be corrected */
+		init_data->ir_codes = RC_MAP_EMPTY;
+		init_data->type = RC_TYPE_UNKNOWN;
+		break;
 	}
 
 	memset(&info, 0, sizeof(struct i2c_board_info));
@@ -219,7 +254,6 @@ struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv)
 		0x1a,	/* Hauppauge IR external - collides with WM8739 */
 		0x18,	/* Hauppauge IR internal */
 		0x71,	/* Hauppauge IR (PVR150) */
-		0x6b,	/* Adaptec IR */
 		I2C_CLIENT_END
 	};
 
-- 
cgit v1.2.3


From 8a6334fc91de3f58bbd3051d6f088e7f71a3becd Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 10:25:12 -0300
Subject: [media] ivtv-i2c: Don't use IR legacy mode for Zilog IR

The Zilog IR entries are already handled by IR new code. So,
remove its usage from the legacy IR support.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-i2c.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index bf0d35affe0b..2bed4309c16b 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -253,7 +253,6 @@ struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv)
 	const unsigned short addr_list[] = {
 		0x1a,	/* Hauppauge IR external - collides with WM8739 */
 		0x18,	/* Hauppauge IR internal */
-		0x71,	/* Hauppauge IR (PVR150) */
 		I2C_CLIENT_END
 	};
 
-- 
cgit v1.2.3


From ea6c06033f01216df504b0f337a350778a3bc80e Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Tue, 28 Dec 2010 22:46:13 -0300
Subject: [media] hdpvr: Add I2C and ir-kdb-i2c registration of the Zilog Z8 IR
 chip

Adds I2C registration of the Zilog Z8F0811 IR microcontroller for either
lirc_zilog or ir-kbd-i2c to use.  This is a required step in removing
lirc_zilog's use of the deprecated struct i2c_adapter.id field.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/hdpvr/hdpvr-core.c |  5 ++++
 drivers/media/video/hdpvr/hdpvr-i2c.c  | 53 ++++++++++++++++++++++++++++++++++
 drivers/media/video/hdpvr/hdpvr.h      |  6 ++++
 3 files changed, 64 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index b70d6afc9fec..f7d1ee55185a 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -385,6 +385,11 @@ static int hdpvr_probe(struct usb_interface *interface,
 		v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n");
 		goto error;
 	}
+
+	/* until i2c is working properly */
+	retval = 0; /* hdpvr_register_i2c_ir(dev); */
+	if (retval < 0)
+		v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n");
 #endif /* CONFIG_I2C */
 
 	/* let the user know what node this device is now attached to */
diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c
index 409de11096d4..24966aa02a70 100644
--- a/drivers/media/video/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/video/hdpvr/hdpvr-i2c.c
@@ -4,6 +4,9 @@
  *
  * Copyright (C) 2008      Janne Grunau (j@jannau.net)
  *
+ * IR device registration code is
+ * Copyright (C) 2010	Andy Walls <awalls@md.metrocast.net>
+ *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
  *	published by the Free Software Foundation, version 2.
@@ -22,6 +25,56 @@
 #define REQTYPE_I2C_WRITE	0xb0
 #define REQTYPE_I2C_WRITE_STATT	0xd0
 
+#define Z8F0811_IR_TX_I2C_ADDR	0x70
+#define Z8F0811_IR_RX_I2C_ADDR	0x71
+
+static const u8 ir_i2c_addrs[] = {
+	Z8F0811_IR_TX_I2C_ADDR,
+	Z8F0811_IR_RX_I2C_ADDR,
+};
+
+static const char * const ir_devicenames[] = {
+	"ir_tx_z8f0811_hdpvr",
+	"ir_rx_z8f0811_hdpvr",
+};
+
+static int hdpvr_new_i2c_ir(struct hdpvr_device *dev, struct i2c_adapter *adap,
+			    const char *type, u8 addr)
+{
+	struct i2c_board_info info;
+	struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data;
+	unsigned short addr_list[2] = { addr, I2C_CLIENT_END };
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, type, I2C_NAME_SIZE);
+
+	/* Our default information for ir-kbd-i2c.c to use */
+	switch (addr) {
+	case Z8F0811_IR_RX_I2C_ADDR:
+		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
+		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+		init_data->type = RC_TYPE_RC5;
+		init_data->name = "HD PVR";
+		info.platform_data = init_data;
+		break;
+	}
+
+	return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+	       -1 : 0;
+}
+
+int hdpvr_register_i2c_ir(struct hdpvr_device *dev)
+{
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ir_i2c_addrs); i++)
+		ret += hdpvr_new_i2c_ir(dev, dev->i2c_adapter,
+					ir_devicenames[i], ir_i2c_addrs[i]);
+
+	return ret;
+}
+
 static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr,
 			  char *data, int len)
 {
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index 5efc963f9164..37f1e4c7675d 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -16,6 +16,7 @@
 #include <linux/videodev2.h>
 
 #include <media/v4l2-device.h>
+#include <media/ir-kbd-i2c.h>
 
 #define HDPVR_MAJOR_VERSION 0
 #define HDPVR_MINOR_VERSION 2
@@ -109,6 +110,9 @@ struct hdpvr_device {
 	/* I2C lock */
 	struct mutex		i2c_mutex;
 
+	/* For passing data to ir-kbd-i2c */
+	struct IR_i2c_init_data	ir_i2c_init_data;
+
 	/* usb control transfer buffer and lock */
 	struct mutex		usbc_mutex;
 	u8			*usbc_buf;
@@ -306,6 +310,8 @@ int hdpvr_cancel_queue(struct hdpvr_device *dev);
 /* i2c adapter registration */
 int hdpvr_register_i2c_adapter(struct hdpvr_device *dev);
 
+int hdpvr_register_i2c_ir(struct hdpvr_device *dev);
+
 /*========================================================================*/
 /* buffer management */
 int hdpvr_free_buffers(struct hdpvr_device *dev);
-- 
cgit v1.2.3


From a9cd591e29b6b50e1212de7b7a86ccd270f5c2a6 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@md.metrocast.net>
Date: Tue, 28 Dec 2010 22:47:46 -0300
Subject: [media] ir-kbd-i2c: Add HD PVR IR Rx support to ir-kbd-i2c

Add HD PVR IR Rx support to ir-kbd-i2c

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ir-kbd-i2c.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index dd54c3dae054..c87b6bc45555 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -449,6 +449,7 @@ static const struct i2c_device_id ir_kbd_id[] = {
 	{ "ir_video", 0 },
 	/* IR device specific entries should be added here */
 	{ "ir_rx_z8f0811_haup", 0 },
+	{ "ir_rx_z8f0811_hdpvr", 0 },
 	{ }
 };
 
-- 
cgit v1.2.3


From 6a23a520c07ba556ea2317b1f72f3d2eb002f991 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 09:05:12 -0300
Subject: [media] cx88: Remove the obsolete i2c_adapter.id field

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-i2c.c        | 1 -
 drivers/media/video/cx88/cx88-vp3054-i2c.c | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index f53836bb6a5a..a1fe0abb6e43 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -146,7 +146,6 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 	core->i2c_adap.dev.parent = &pci->dev;
 	strlcpy(core->i2c_adap.name,core->name,sizeof(core->i2c_adap.name));
 	core->i2c_adap.owner = THIS_MODULE;
-	core->i2c_adap.id = I2C_HW_B_CX2388x;
 	core->i2c_algo.udelay = i2c_udelay;
 	core->i2c_algo.data = core;
 	i2c_set_adapdata(&core->i2c_adap, &core->v4l2_dev);
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index ec5476d8b10b..d77f8ecab9d7 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -125,7 +125,6 @@ int vp3054_i2c_probe(struct cx8802_dev *dev)
 	strlcpy(vp3054_i2c->adap.name, core->name,
 		sizeof(vp3054_i2c->adap.name));
 	vp3054_i2c->adap.owner = THIS_MODULE;
-	vp3054_i2c->adap.id = I2C_HW_B_CX2388x;
 	vp3054_i2c->algo.data = dev;
 	i2c_set_adapdata(&vp3054_i2c->adap, dev);
 	vp3054_i2c->adap.algo_data = &vp3054_i2c->algo;
-- 
cgit v1.2.3


From 9804ed9e840c461f88b290dea43173e3eed37102 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 30 Dec 2010 11:58:37 -0300
Subject: [media] ivtv-i2c: Fix two warnings

Fix two gcc warnings:

drivers/media/video/ivtv/ivtv-i2c.c:170: warning: cast from pointer to integer of different size
drivers/media/video/ivtv/ivtv-i2c.c:171: warning: cast from pointer to integer of different size
$ gcc --version
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48)

They seem bogus, but, as the original code also has problems with
LE/BE, just change its implementation to be clear.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-i2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 2bed4309c16b..e103b8fc7452 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -167,8 +167,8 @@ static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	keybuf[2] &= 0x7f;
 	keybuf[3] |= 0x80;
 
-	*ir_key = (u32) keybuf;
-	*ir_raw = (u32) keybuf;
+	*ir_key = keybuf[3] | keybuf[2] << 8 | keybuf[1] << 16 |keybuf[0] << 24;
+	*ir_raw = *ir_key;
 
 	return 1;
 }
-- 
cgit v1.2.3


From f7b74f76a3a5bcad4d2e8db76834253a63977545 Mon Sep 17 00:00:00 2001
From: David Cohen <dacohen@gmail.com>
Date: Wed, 8 Dec 2010 09:13:58 -0300
Subject: [media] ov9640: use macro to request OmniVision OV9640 sensor private
 data

This cleanup patch creates macro to request OmniVision OV9640 private
data, which increases readability.

Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov9640.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 99e9e1d3c83b..c6d8e8a88d2d 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -31,6 +31,8 @@
 
 #include "ov9640.h"
 
+#define to_ov9640_sensor(sd)	container_of(sd, struct ov9640_priv, subdev)
+
 /* default register setup */
 static const struct ov9640_reg ov9640_regs_dflt[] = {
 	{ OV9640_COM5,	OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
@@ -308,9 +310,7 @@ static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
 /* Get status of additional camera capabilities */
 static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -327,8 +327,7 @@ static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	int ret = 0;
 
@@ -360,9 +359,7 @@ static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov9640_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	id->ident	= priv->model;
 	id->revision	= priv->revision;
-- 
cgit v1.2.3


From 63c9718c1a4595d51f5b70ed4aed6cee5aea875b Mon Sep 17 00:00:00 2001
From: David Cohen <dacohen@gmail.com>
Date: Wed, 8 Dec 2010 09:13:59 -0300
Subject: [media] ov9640: fix OmniVision OV9640 sensor driver's priv data
 retrieving

OmniVision OV9640 driver wasn't requesting properly its private data
on I2C remove and video_probe functions. It was retrieving the V4L2
subdev struct address instead of priv struct's one. This patch fixes
such problem.

Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov9640.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index c6d8e8a88d2d..53d88a2ab920 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -651,7 +651,8 @@ static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 static int ov9640_video_probe(struct soc_camera_device *icd,
 				struct i2c_client *client)
 {
-	struct ov9640_priv *priv = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 	u8		pid, ver, midh, midl;
 	const char	*devname;
 	int		ret = 0;
@@ -788,7 +789,8 @@ static int ov9640_probe(struct i2c_client *client,
 
 static int ov9640_remove(struct i2c_client *client)
 {
-	struct ov9640_priv *priv = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	kfree(priv);
 	return 0;
-- 
cgit v1.2.3


From c85bb69af09988f728aca825c11267c9d06ba32e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 30 Dec 2010 08:37:06 -0300
Subject: [media] v4l: ov772x: simplify pointer dereference

Use a more direct way to obtain a pointer to struct ov772x_priv, where the
subdevice is available.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov772x.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index a84b770352f9..48895ef863ff 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -600,7 +600,7 @@ static int ov772x_reset(struct i2c_client *client)
 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	if (!enable) {
 		ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
@@ -645,8 +645,7 @@ static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
 
 static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -665,7 +664,7 @@ static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	int ret = 0;
 	u8 val;
 
@@ -715,8 +714,7 @@ static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov772x_g_chip_ident(struct v4l2_subdev *sd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	id->ident    = priv->model;
 	id->revision = 0;
@@ -955,7 +953,7 @@ static int ov772x_g_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	if (!priv->win || !priv->cfmt) {
 		u32 width = VGA_WIDTH, height = VGA_HEIGHT;
@@ -978,7 +976,7 @@ static int ov772x_s_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	int ret = ov772x_set_params(client, &mf->width, &mf->height,
 				    mf->code);
 
@@ -991,8 +989,7 @@ static int ov772x_s_fmt(struct v4l2_subdev *sd,
 static int ov772x_try_fmt(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	const struct ov772x_win_size *win;
 	int i;
 
-- 
cgit v1.2.3


From b6a633c18ba83c0c8e96759a31d356bfb77e2b5f Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Sat, 25 Dec 2010 17:40:26 -0300
Subject: [media] v4l: soc-camera: switch to .unlocked_ioctl

Use the V4L mutex infrastructure in soc-camera core and drivers and switch to
.unlocked_ioctl.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx1_camera.c           |  7 ++---
 drivers/media/video/mx2_camera.c           |  3 +-
 drivers/media/video/mx3_camera.c           |  2 +-
 drivers/media/video/omap1_camera.c         |  4 +--
 drivers/media/video/pxa_camera.c           |  2 +-
 drivers/media/video/sh_mobile_ceu_camera.c |  2 +-
 drivers/media/video/soc_camera.c           | 47 ++++++------------------------
 7 files changed, 19 insertions(+), 48 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 5e486a88ad7c..bc0c23a1009c 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -382,10 +382,9 @@ static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 	struct mx1_camera_dev *pcdev = ici->priv;
 
 	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent,
-					&pcdev->lock,
-					V4L2_BUF_TYPE_VIDEO_CAPTURE,
-					V4L2_FIELD_NONE,
-					sizeof(struct mx1_buffer), icd, NULL);
+				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+				V4L2_FIELD_NONE,
+				sizeof(struct mx1_buffer), icd, &icd->video_lock);
 }
 
 static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 13565cba237d..4eab1c620318 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -683,7 +683,8 @@ static void mx2_camera_init_videobuf(struct videobuf_queue *q,
 
 	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
 			&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd, NULL);
+			V4L2_FIELD_NONE, sizeof(struct mx2_buffer),
+			icd, &icd->video_lock);
 }
 
 #define MX2_BUS_FLAGS	(SOCAM_DATAWIDTH_8 | \
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 330d42e15498..b9cb4a436959 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -443,7 +443,7 @@ static void mx3_camera_init_videobuf(struct videobuf_queue *q,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       V4L2_FIELD_NONE,
 				       sizeof(struct mx3_camera_buffer), icd,
-				       NULL);
+				       &icd->video_lock);
 }
 
 /* First part of ipu_csi_init_interface() */
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index cbfd07f2d9da..0a2fb2bfdbfb 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -1365,12 +1365,12 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd, NULL);
+				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 	else
 		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd, NULL);
+				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 
 	/* use videobuf mode (auto)selected with the module parameter */
 	pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index c143ed0a5270..02686771740d 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -852,7 +852,7 @@ static void pxa_camera_init_videobuf(struct videobuf_queue *q,
 	 */
 	videobuf_queue_sg_init(q, &pxa_videobuf_ops, NULL, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct pxa_buffer), icd, NULL);
+				sizeof(struct pxa_buffer), icd, &icd->video_lock);
 }
 
 static u32 mclk_get_divisor(struct platform_device *pdev,
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 2486520582f2..954222bc3458 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1786,7 +1786,7 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       pcdev->field,
 				       sizeof(struct sh_mobile_ceu_buffer),
-				       icd, NULL);
+				       icd, &icd->video_lock);
 }
 
 static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 052bd6dfa5a7..aba4ce92a86b 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -352,12 +352,6 @@ static int soc_camera_open(struct file *file)
 		return -EINVAL;
 	}
 
-	/*
-	 * Protect against icd->ops->remove() until we module_get() both
-	 * drivers.
-	 */
-	mutex_lock(&icd->video_lock);
-
 	icd->use_count++;
 
 	/* Now we really have to activate the camera */
@@ -412,8 +406,6 @@ static int soc_camera_open(struct file *file)
 	file->private_data = icd;
 	dev_dbg(&icd->dev, "camera device open\n");
 
-	mutex_unlock(&icd->video_lock);
-
 	return 0;
 
 	/*
@@ -429,7 +421,6 @@ eiciadd:
 		icl->power(icd->pdev, 0);
 epower:
 	icd->use_count--;
-	mutex_unlock(&icd->video_lock);
 	module_put(ici->ops->owner);
 
 	return ret;
@@ -440,7 +431,6 @@ static int soc_camera_close(struct file *file)
 	struct soc_camera_device *icd = file->private_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	mutex_lock(&icd->video_lock);
 	icd->use_count--;
 	if (!icd->use_count) {
 		struct soc_camera_link *icl = to_soc_camera_link(icd);
@@ -457,8 +447,6 @@ static int soc_camera_close(struct file *file)
 	if (icd->streamer == file)
 		icd->streamer = NULL;
 
-	mutex_unlock(&icd->video_lock);
-
 	module_put(ici->ops->owner);
 
 	dev_dbg(&icd->dev, "camera device close\n");
@@ -517,7 +505,7 @@ static struct v4l2_file_operations soc_camera_fops = {
 	.owner		= THIS_MODULE,
 	.open		= soc_camera_open,
 	.release	= soc_camera_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read		= soc_camera_read,
 	.mmap		= soc_camera_mmap,
 	.poll		= soc_camera_poll,
@@ -534,12 +522,9 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	if (icd->streamer && icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->vb_vidq.vb_lock);
-
 	if (icd->vb_vidq.bufs[0]) {
 		dev_err(&icd->dev, "S_FMT denied: queue initialised\n");
-		ret = -EBUSY;
-		goto unlock;
+		return -EBUSY;
 	}
 
 	ret = soc_camera_set_fmt(icd, f);
@@ -547,9 +532,6 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	if (!ret && !icd->streamer)
 		icd->streamer = file;
 
-unlock:
-	mutex_unlock(&icd->vb_vidq.vb_lock);
-
 	return ret;
 }
 
@@ -622,15 +604,11 @@ static int soc_camera_streamon(struct file *file, void *priv,
 	if (icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->video_lock);
-
 	v4l2_subdev_call(sd, video, s_stream, 1);
 
 	/* This calls buf_queue from host driver's videobuf_queue_ops */
 	ret = videobuf_streamon(&icd->vb_vidq);
 
-	mutex_unlock(&icd->video_lock);
-
 	return ret;
 }
 
@@ -648,8 +626,6 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 	if (icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->video_lock);
-
 	/*
 	 * This calls buf_release from host driver's videobuf_queue_ops for all
 	 * remaining buffers. When the last buffer is freed, stop capture
@@ -658,8 +634,6 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 
 	v4l2_subdev_call(sd, video, s_stream, 0);
 
-	mutex_unlock(&icd->video_lock);
-
 	return 0;
 }
 
@@ -748,9 +722,7 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int ret;
 
-	mutex_lock(&icd->vb_vidq.vb_lock);
 	ret = ici->ops->get_crop(icd, a);
-	mutex_unlock(&icd->vb_vidq.vb_lock);
 
 	return ret;
 }
@@ -775,9 +747,6 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n",
 		rect->width, rect->height, rect->left, rect->top);
 
-	/* Cropping is allowed during a running capture, guard consistency */
-	mutex_lock(&icd->vb_vidq.vb_lock);
-
 	/* If get_crop fails, we'll let host and / or client drivers decide */
 	ret = ici->ops->get_crop(icd, &current_crop);
 
@@ -795,8 +764,6 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 		ret = ici->ops->set_crop(icd, a);
 	}
 
-	mutex_unlock(&icd->vb_vidq.vb_lock);
-
 	return ret;
 }
 
@@ -998,7 +965,13 @@ static int soc_camera_probe(struct device *dev)
 
 	icd->field = V4L2_FIELD_ANY;
 
-	/* ..._video_start() will create a device node, so we have to protect */
+	icd->vdev->lock = &icd->video_lock;
+
+	/*
+	 * ..._video_start() will create a device node, video_register_device()
+	 * itself is protected against concurrent open() calls, but we also have
+	 * to protect our data.
+	 */
 	mutex_lock(&icd->video_lock);
 
 	ret = soc_camera_video_start(icd);
@@ -1063,10 +1036,8 @@ static int soc_camera_remove(struct device *dev)
 	BUG_ON(!dev->parent);
 
 	if (vdev) {
-		mutex_lock(&icd->video_lock);
 		video_unregister_device(vdev);
 		icd->vdev = NULL;
-		mutex_unlock(&icd->video_lock);
 	}
 
 	if (icl->board_info) {
-- 
cgit v1.2.3


From 3153ac9c6208892ee237caccdbe2290f8247e236 Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Thu, 2 Dec 2010 11:53:28 -0300
Subject: [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision
 OV2640 sensor

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig  |    6 +
 drivers/media/video/Makefile |    1 +
 drivers/media/video/ov2640.c | 1205 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1212 insertions(+)
 create mode 100644 drivers/media/video/ov2640.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 78b8c5de1f6b..eb875af05e79 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -794,6 +794,12 @@ config SOC_CAMERA_PLATFORM
 	help
 	  This is a generic SoC camera platform driver, useful for testing
 
+config SOC_CAMERA_OV2640
+	tristate "ov2640 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov2640 camera driver
+
 config SOC_CAMERA_OV6650
 	tristate "ov6650 sensor support"
 	depends on SOC_CAMERA && I2C
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 98825e7d8ca4..81e38cb0b846 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
 obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
 obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
 obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
 obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
 obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
new file mode 100644
index 000000000000..0cea0cf36679
--- /dev/null
+++ b/drivers/media/video/ov2640.c
@@ -0,0 +1,1205 @@
+/*
+ * ov2640 Camera Driver
+ *
+ * Copyright (C) 2010 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *
+ * Based on ov772x, ov9640 drivers and previous non merged implementations.
+ *
+ * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2006, OmniVision
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+
+#define VAL_SET(x, mask, rshift, lshift)  \
+		((((x) >> rshift) & mask) << lshift)
+/*
+ * DSP registers
+ * register offset for BANK_SEL == BANK_SEL_DSP
+ */
+#define R_BYPASS    0x05 /* Bypass DSP */
+#define   R_BYPASS_DSP_BYPAS    0x01 /* Bypass DSP, sensor out directly */
+#define   R_BYPASS_USE_DSP      0x00 /* Use the internal DSP */
+#define QS          0x44 /* Quantization Scale Factor */
+#define CTRLI       0x50
+#define   CTRLI_LP_DP           0x80
+#define   CTRLI_ROUND           0x40
+#define   CTRLI_V_DIV_SET(x)    VAL_SET(x, 0x3, 0, 3)
+#define   CTRLI_H_DIV_SET(x)    VAL_SET(x, 0x3, 0, 0)
+#define HSIZE       0x51 /* H_SIZE[7:0] (real/4) */
+#define   HSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
+#define VSIZE       0x52 /* V_SIZE[7:0] (real/4) */
+#define   VSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
+#define XOFFL       0x53 /* OFFSET_X[7:0] */
+#define   XOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
+#define YOFFL       0x54 /* OFFSET_Y[7:0] */
+#define   YOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
+#define VHYX        0x55 /* Offset and size completion */
+#define   VHYX_VSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 7)
+#define   VHYX_HSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 3)
+#define   VHYX_YOFF_SET(x)      VAL_SET(x, 0x3, 8, 4)
+#define   VHYX_XOFF_SET(x)      VAL_SET(x, 0x3, 8, 0)
+#define DPRP        0x56
+#define TEST        0x57 /* Horizontal size completion */
+#define   TEST_HSIZE_SET(x)     VAL_SET(x, 0x1, (9+2), 7)
+#define ZMOW        0x5A /* Zoom: Out Width  OUTW[7:0] (real/4) */
+#define   ZMOW_OUTW_SET(x)      VAL_SET(x, 0xFF, 2, 0)
+#define ZMOH        0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */
+#define   ZMOH_OUTH_SET(x)      VAL_SET(x, 0xFF, 2, 0)
+#define ZMHH        0x5C /* Zoom: Speed and H&W completion */
+#define   ZMHH_ZSPEED_SET(x)    VAL_SET(x, 0x0F, 0, 4)
+#define   ZMHH_OUTH_SET(x)      VAL_SET(x, 0x1, (8+2), 2)
+#define   ZMHH_OUTW_SET(x)      VAL_SET(x, 0x3, (8+2), 0)
+#define BPADDR      0x7C /* SDE Indirect Register Access: Address */
+#define BPDATA      0x7D /* SDE Indirect Register Access: Data */
+#define CTRL2       0x86 /* DSP Module enable 2 */
+#define   CTRL2_DCW_EN          0x20
+#define   CTRL2_SDE_EN          0x10
+#define   CTRL2_UV_ADJ_EN       0x08
+#define   CTRL2_UV_AVG_EN       0x04
+#define   CTRL2_CMX_EN          0x01
+#define CTRL3       0x87 /* DSP Module enable 3 */
+#define   CTRL3_BPC_EN          0x80
+#define   CTRL3_WPC_EN          0x40
+#define SIZEL       0x8C /* Image Size Completion */
+#define   SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6)
+#define   SIZEL_HSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 3)
+#define   SIZEL_VSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 0)
+#define HSIZE8      0xC0 /* Image Horizontal Size HSIZE[10:3] */
+#define   HSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
+#define VSIZE8      0xC1 /* Image Vertical Size VSIZE[10:3] */
+#define   VSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
+#define CTRL0       0xC2 /* DSP Module enable 0 */
+#define   CTRL0_AEC_EN       0x80
+#define   CTRL0_AEC_SEL      0x40
+#define   CTRL0_STAT_SEL     0x20
+#define   CTRL0_VFIRST       0x10
+#define   CTRL0_YUV422       0x08
+#define   CTRL0_YUV_EN       0x04
+#define   CTRL0_RGB_EN       0x02
+#define   CTRL0_RAW_EN       0x01
+#define CTRL1       0xC3 /* DSP Module enable 1 */
+#define   CTRL1_CIP          0x80
+#define   CTRL1_DMY          0x40
+#define   CTRL1_RAW_GMA      0x20
+#define   CTRL1_DG           0x10
+#define   CTRL1_AWB          0x08
+#define   CTRL1_AWB_GAIN     0x04
+#define   CTRL1_LENC         0x02
+#define   CTRL1_PRE          0x01
+#define R_DVP_SP    0xD3 /* DVP output speed control */
+#define   R_DVP_SP_AUTO_MODE 0x80
+#define   R_DVP_SP_DVP_MASK  0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0);
+				   *          = sysclk (48)/(2*[6:0]) (RAW);*/
+#define IMAGE_MODE  0xDA /* Image Output Format Select */
+#define   IMAGE_MODE_Y8_DVP_EN   0x40
+#define   IMAGE_MODE_JPEG_EN     0x10
+#define   IMAGE_MODE_YUV422      0x00
+#define   IMAGE_MODE_RAW10       0x04 /* (DVP) */
+#define   IMAGE_MODE_RGB565      0x08
+#define   IMAGE_MODE_HREF_VSYNC  0x02 /* HREF timing select in DVP JPEG output
+				       * mode (0 for HREF is same as sensor) */
+#define   IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP
+				       *    1: Low byte first UYVY (C2[4] =0)
+				       *        VYUY (C2[4] =1)
+				       *    0: High byte first YUYV (C2[4]=0)
+				       *        YVYU (C2[4] = 1) */
+#define RESET       0xE0 /* Reset */
+#define   RESET_MICROC       0x40
+#define   RESET_SCCB         0x20
+#define   RESET_JPEG         0x10
+#define   RESET_DVP          0x04
+#define   RESET_IPU          0x02
+#define   RESET_CIF          0x01
+#define REGED       0xED /* Register ED */
+#define   REGED_CLK_OUT_DIS  0x10
+#define MS_SP       0xF0 /* SCCB Master Speed */
+#define SS_ID       0xF7 /* SCCB Slave ID */
+#define SS_CTRL     0xF8 /* SCCB Slave Control */
+#define   SS_CTRL_ADD_AUTO_INC  0x20
+#define   SS_CTRL_EN            0x08
+#define   SS_CTRL_DELAY_CLK     0x04
+#define   SS_CTRL_ACC_EN        0x02
+#define   SS_CTRL_SEN_PASS_THR  0x01
+#define MC_BIST     0xF9 /* Microcontroller misc register */
+#define   MC_BIST_RESET           0x80 /* Microcontroller Reset */
+#define   MC_BIST_BOOT_ROM_SEL    0x40
+#define   MC_BIST_12KB_SEL        0x20
+#define   MC_BIST_12KB_MASK       0x30
+#define   MC_BIST_512KB_SEL       0x08
+#define   MC_BIST_512KB_MASK      0x0C
+#define   MC_BIST_BUSY_BIT_R      0x02
+#define   MC_BIST_MC_RES_ONE_SH_W 0x02
+#define   MC_BIST_LAUNCH          0x01
+#define BANK_SEL    0xFF /* Register Bank Select */
+#define   BANK_SEL_DSP     0x00
+#define   BANK_SEL_SENS    0x01
+
+/*
+ * Sensor registers
+ * register offset for BANK_SEL == BANK_SEL_SENS
+ */
+#define GAIN        0x00 /* AGC - Gain control gain setting */
+#define COM1        0x03 /* Common control 1 */
+#define   COM1_1_DUMMY_FR          0x40
+#define   COM1_3_DUMMY_FR          0x80
+#define   COM1_7_DUMMY_FR          0xC0
+#define   COM1_VWIN_LSB_UXGA       0x0F
+#define   COM1_VWIN_LSB_SVGA       0x0A
+#define   COM1_VWIN_LSB_CIF        0x06
+#define REG04       0x04 /* Register 04 */
+#define   REG04_DEF             0x20 /* Always set */
+#define   REG04_HFLIP_IMG       0x80 /* Horizontal mirror image ON/OFF */
+#define   REG04_VFLIP_IMG       0x40 /* Vertical flip image ON/OFF */
+#define   REG04_VREF_EN         0x10
+#define   REG04_HREF_EN         0x08
+#define   REG04_AEC_SET(x)      VAL_SET(x, 0x3, 0, 0)
+#define REG08       0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */
+#define COM2        0x09 /* Common control 2 */
+#define   COM2_SOFT_SLEEP_MODE  0x10 /* Soft sleep mode */
+				     /* Output drive capability */
+#define   COM2_OCAP_Nx_SET(N)   (((N) - 1) & 0x03) /* N = [1x .. 4x] */
+#define PID         0x0A /* Product ID Number MSB */
+#define VER         0x0B /* Product ID Number LSB */
+#define COM3        0x0C /* Common control 3 */
+#define   COM3_BAND_50H        0x04 /* 0 For Banding at 60H */
+#define   COM3_BAND_AUTO       0x02 /* Auto Banding */
+#define   COM3_SING_FR_SNAPSH  0x01 /* 0 For enable live video output after the
+				     * snapshot sequence*/
+#define AEC         0x10 /* AEC[9:2] Exposure Value */
+#define CLKRC       0x11 /* Internal clock */
+#define   CLKRC_EN             0x80
+#define   CLKRC_DIV_SET(x)     (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */
+#define COM7        0x12 /* Common control 7 */
+#define   COM7_SRST            0x80 /* Initiates system reset. All registers are
+				     * set to factory default values after which
+				     * the chip resumes normal operation */
+#define   COM7_RES_UXGA        0x00 /* Resolution selectors for UXGA */
+#define   COM7_RES_SVGA        0x40 /* SVGA */
+#define   COM7_RES_CIF         0x20 /* CIF */
+#define   COM7_ZOOM_EN         0x04 /* Enable Zoom mode */
+#define   COM7_COLOR_BAR_TEST  0x02 /* Enable Color Bar Test Pattern */
+#define COM8        0x13 /* Common control 8 */
+#define   COM8_DEF             0xC0 /* Banding filter ON/OFF */
+#define   COM8_BNDF_EN         0x20 /* Banding filter ON/OFF */
+#define   COM8_AGC_EN          0x04 /* AGC Auto/Manual control selection */
+#define   COM8_AEC_EN          0x01 /* Auto/Manual Exposure control */
+#define COM9        0x14 /* Common control 9
+			  * Automatic gain ceiling - maximum AGC value [7:5]*/
+#define   COM9_AGC_GAIN_2x     0x00 /* 000 :   2x */
+#define   COM9_AGC_GAIN_4x     0x20 /* 001 :   4x */
+#define   COM9_AGC_GAIN_8x     0x40 /* 010 :   8x */
+#define   COM9_AGC_GAIN_16x    0x60 /* 011 :  16x */
+#define   COM9_AGC_GAIN_32x    0x80 /* 100 :  32x */
+#define   COM9_AGC_GAIN_64x    0xA0 /* 101 :  64x */
+#define   COM9_AGC_GAIN_128x   0xC0 /* 110 : 128x */
+#define COM10       0x15 /* Common control 10 */
+#define   COM10_PCLK_HREF      0x20 /* PCLK output qualified by HREF */
+#define   COM10_PCLK_RISE      0x10 /* Data is updated at the rising edge of
+				     * PCLK (user can latch data at the next
+				     * falling edge of PCLK).
+				     * 0 otherwise. */
+#define   COM10_HREF_INV       0x08 /* Invert HREF polarity:
+				     * HREF negative for valid data*/
+#define   COM10_VSINC_INV      0x02 /* Invert VSYNC polarity */
+#define HSTART      0x17 /* Horizontal Window start MSB 8 bit */
+#define HEND        0x18 /* Horizontal Window end MSB 8 bit */
+#define VSTART      0x19 /* Vertical Window start MSB 8 bit */
+#define VEND        0x1A /* Vertical Window end MSB 8 bit */
+#define MIDH        0x1C /* Manufacturer ID byte - high */
+#define MIDL        0x1D /* Manufacturer ID byte - low  */
+#define AEW         0x24 /* AGC/AEC - Stable operating region (upper limit) */
+#define AEB         0x25 /* AGC/AEC - Stable operating region (lower limit) */
+#define VV          0x26 /* AGC/AEC Fast mode operating region */
+#define   VV_HIGH_TH_SET(x)      VAL_SET(x, 0xF, 0, 4)
+#define   VV_LOW_TH_SET(x)       VAL_SET(x, 0xF, 0, 0)
+#define REG2A       0x2A /* Dummy pixel insert MSB */
+#define FRARL       0x2B /* Dummy pixel insert LSB */
+#define ADDVFL      0x2D /* LSB of insert dummy lines in Vertical direction */
+#define ADDVFH      0x2E /* MSB of insert dummy lines in Vertical direction */
+#define YAVG        0x2F /* Y/G Channel Average value */
+#define REG32       0x32 /* Common Control 32 */
+#define   REG32_PCLK_DIV_2    0x80 /* PCLK freq divided by 2 */
+#define   REG32_PCLK_DIV_4    0xC0 /* PCLK freq divided by 4 */
+#define ARCOM2      0x34 /* Zoom: Horizontal start point */
+#define REG45       0x45 /* Register 45 */
+#define FLL         0x46 /* Frame Length Adjustment LSBs */
+#define FLH         0x47 /* Frame Length Adjustment MSBs */
+#define COM19       0x48 /* Zoom: Vertical start point */
+#define ZOOMS       0x49 /* Zoom: Vertical start point */
+#define COM22       0x4B /* Flash light control */
+#define COM25       0x4E /* For Banding operations */
+#define BD50        0x4F /* 50Hz Banding AEC 8 LSBs */
+#define BD60        0x50 /* 60Hz Banding AEC 8 LSBs */
+#define REG5D       0x5D /* AVGsel[7:0],   16-zone average weight option */
+#define REG5E       0x5E /* AVGsel[15:8],  16-zone average weight option */
+#define REG5F       0x5F /* AVGsel[23:16], 16-zone average weight option */
+#define REG60       0x60 /* AVGsel[31:24], 16-zone average weight option */
+#define HISTO_LOW   0x61 /* Histogram Algorithm Low Level */
+#define HISTO_HIGH  0x62 /* Histogram Algorithm High Level */
+
+/*
+ * ID
+ */
+#define MANUFACTURER_ID	0x7FA2
+#define PID_OV2640	0x2642
+#define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
+
+/*
+ * Struct
+ */
+struct regval_list {
+	u8 reg_num;
+	u8 value;
+};
+
+/* Supported resolutions */
+enum ov2640_width {
+	W_QCIF	= 176,
+	W_QVGA	= 320,
+	W_CIF	= 352,
+	W_VGA	= 640,
+	W_SVGA	= 800,
+	W_XGA	= 1024,
+	W_SXGA	= 1280,
+	W_UXGA	= 1600,
+};
+
+enum ov2640_height {
+	H_QCIF	= 144,
+	H_QVGA	= 240,
+	H_CIF	= 288,
+	H_VGA	= 480,
+	H_SVGA	= 600,
+	H_XGA	= 768,
+	H_SXGA	= 1024,
+	H_UXGA	= 1200,
+};
+
+struct ov2640_win_size {
+	char				*name;
+	enum ov2640_width		width;
+	enum ov2640_height		height;
+	const struct regval_list	*regs;
+};
+
+
+struct ov2640_priv {
+	struct v4l2_subdev		subdev;
+	struct ov2640_camera_info	*info;
+	enum v4l2_mbus_pixelcode	cfmt_code;
+	const struct ov2640_win_size	*win;
+	int				model;
+	u16				flag_vflip:1;
+	u16				flag_hflip:1;
+};
+
+/*
+ * Registers settings
+ */
+
+#define ENDMARKER { 0xff, 0xff }
+
+static const struct regval_list ov2640_init_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ 0x2c,   0xff },
+	{ 0x2e,   0xdf },
+	{ BANK_SEL, BANK_SEL_SENS },
+	{ 0x3c,   0x32 },
+	{ CLKRC, CLKRC_DIV_SET(1) },
+	{ COM2, COM2_OCAP_Nx_SET(3) },
+	{ REG04, REG04_DEF | REG04_HREF_EN },
+	{ COM8,  COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN },
+	{ COM9, COM9_AGC_GAIN_8x | 0x08},
+	{ 0x2c,   0x0c },
+	{ 0x33,   0x78 },
+	{ 0x3a,   0x33 },
+	{ 0x3b,   0xfb },
+	{ 0x3e,   0x00 },
+	{ 0x43,   0x11 },
+	{ 0x16,   0x10 },
+	{ 0x39,   0x02 },
+	{ 0x35,   0x88 },
+	{ 0x22,   0x0a },
+	{ 0x37,   0x40 },
+	{ 0x23,   0x00 },
+	{ ARCOM2, 0xa0 },
+	{ 0x06,   0x02 },
+	{ 0x06,   0x88 },
+	{ 0x07,   0xc0 },
+	{ 0x0d,   0xb7 },
+	{ 0x0e,   0x01 },
+	{ 0x4c,   0x00 },
+	{ 0x4a,   0x81 },
+	{ 0x21,   0x99 },
+	{ AEW,    0x40 },
+	{ AEB,    0x38 },
+	{ VV,     VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) },
+	{ 0x5c,   0x00 },
+	{ 0x63,   0x00 },
+	{ FLL,    0x22 },
+	{ COM3,   0x38 | COM3_BAND_AUTO },
+	{ REG5D,  0x55 },
+	{ REG5E,  0x7d },
+	{ REG5F,  0x7d },
+	{ REG60,  0x55 },
+	{ HISTO_LOW,   0x70 },
+	{ HISTO_HIGH,  0x80 },
+	{ 0x7c,   0x05 },
+	{ 0x20,   0x80 },
+	{ 0x28,   0x30 },
+	{ 0x6c,   0x00 },
+	{ 0x6d,   0x80 },
+	{ 0x6e,   0x00 },
+	{ 0x70,   0x02 },
+	{ 0x71,   0x94 },
+	{ 0x73,   0xc1 },
+	{ 0x3d,   0x34 },
+	{ COM7, COM7_RES_UXGA | COM7_ZOOM_EN },
+	{ 0x5a,   0x57 },
+	{ BD50,   0xbb },
+	{ BD60,   0x9c },
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ 0xe5,   0x7f },
+	{ MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL },
+	{ 0x41,   0x24 },
+	{ RESET, RESET_JPEG | RESET_DVP },
+	{ 0x76,   0xff },
+	{ 0x33,   0xa0 },
+	{ 0x42,   0x20 },
+	{ 0x43,   0x18 },
+	{ 0x4c,   0x00 },
+	{ CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 },
+	{ 0x88,   0x3f },
+	{ 0xd7,   0x03 },
+	{ 0xd9,   0x10 },
+	{ R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 },
+	{ 0xc8,   0x08 },
+	{ 0xc9,   0x80 },
+	{ BPADDR, 0x00 },
+	{ BPDATA, 0x00 },
+	{ BPADDR, 0x03 },
+	{ BPDATA, 0x48 },
+	{ BPDATA, 0x48 },
+	{ BPADDR, 0x08 },
+	{ BPDATA, 0x20 },
+	{ BPDATA, 0x10 },
+	{ BPDATA, 0x0e },
+	{ 0x90,   0x00 },
+	{ 0x91,   0x0e },
+	{ 0x91,   0x1a },
+	{ 0x91,   0x31 },
+	{ 0x91,   0x5a },
+	{ 0x91,   0x69 },
+	{ 0x91,   0x75 },
+	{ 0x91,   0x7e },
+	{ 0x91,   0x88 },
+	{ 0x91,   0x8f },
+	{ 0x91,   0x96 },
+	{ 0x91,   0xa3 },
+	{ 0x91,   0xaf },
+	{ 0x91,   0xc4 },
+	{ 0x91,   0xd7 },
+	{ 0x91,   0xe8 },
+	{ 0x91,   0x20 },
+	{ 0x92,   0x00 },
+	{ 0x93,   0x06 },
+	{ 0x93,   0xe3 },
+	{ 0x93,   0x03 },
+	{ 0x93,   0x03 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x02 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x96,   0x00 },
+	{ 0x97,   0x08 },
+	{ 0x97,   0x19 },
+	{ 0x97,   0x02 },
+	{ 0x97,   0x0c },
+	{ 0x97,   0x24 },
+	{ 0x97,   0x30 },
+	{ 0x97,   0x28 },
+	{ 0x97,   0x26 },
+	{ 0x97,   0x02 },
+	{ 0x97,   0x98 },
+	{ 0x97,   0x80 },
+	{ 0x97,   0x00 },
+	{ 0x97,   0x00 },
+	{ 0xa4,   0x00 },
+	{ 0xa8,   0x00 },
+	{ 0xc5,   0x11 },
+	{ 0xc6,   0x51 },
+	{ 0xbf,   0x80 },
+	{ 0xc7,   0x10 },
+	{ 0xb6,   0x66 },
+	{ 0xb8,   0xA5 },
+	{ 0xb7,   0x64 },
+	{ 0xb9,   0x7C },
+	{ 0xb3,   0xaf },
+	{ 0xb4,   0x97 },
+	{ 0xb5,   0xFF },
+	{ 0xb0,   0xC5 },
+	{ 0xb1,   0x94 },
+	{ 0xb2,   0x0f },
+	{ 0xc4,   0x5c },
+	{ 0xa6,   0x00 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x1b },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x19 },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x19 },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0x7f,   0x00 },
+	{ 0xe5,   0x1f },
+	{ 0xe1,   0x77 },
+	{ 0xdd,   0x7f },
+	{ CTRL0,  CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN },
+	ENDMARKER,
+};
+
+/*
+ * Register settings for window size
+ * The preamble, setup the internal DSP to input an UXGA (1600x1200) image.
+ * Then the different zooming configurations will setup the output image size.
+ */
+static const struct regval_list ov2640_size_change_preamble_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ RESET, RESET_DVP },
+	{ HSIZE8, HSIZE8_SET(W_UXGA) },
+	{ VSIZE8, VSIZE8_SET(H_UXGA) },
+	{ CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN |
+		 CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN },
+	{ HSIZE, HSIZE_SET(W_UXGA) },
+	{ VSIZE, VSIZE_SET(H_UXGA) },
+	{ XOFFL, XOFFL_SET(0) },
+	{ YOFFL, YOFFL_SET(0) },
+	{ VHYX, VHYX_HSIZE_SET(W_UXGA) | VHYX_VSIZE_SET(H_UXGA) |
+		VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)},
+	{ TEST, TEST_HSIZE_SET(W_UXGA) },
+	ENDMARKER,
+};
+
+#define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div)	\
+	{ CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) |	\
+		 CTRLI_H_DIV_SET(h_div)},		\
+	{ ZMOW, ZMOW_OUTW_SET(x) },			\
+	{ ZMOH, ZMOH_OUTH_SET(y) },			\
+	{ ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) },	\
+	{ R_DVP_SP, pclk_div },				\
+	{ RESET, 0x00}
+
+static const struct regval_list ov2640_qcif_regs[] = {
+	PER_SIZE_REG_SEQ(W_QCIF, H_QCIF, 3, 3, 4),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_qvga_regs[] = {
+	PER_SIZE_REG_SEQ(W_QVGA, H_QVGA, 2, 2, 4),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_cif_regs[] = {
+	PER_SIZE_REG_SEQ(W_CIF, H_CIF, 2, 2, 8),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_vga_regs[] = {
+	PER_SIZE_REG_SEQ(W_VGA, H_VGA, 0, 0, 2),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_svga_regs[] = {
+	PER_SIZE_REG_SEQ(W_SVGA, H_SVGA, 1, 1, 2),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_xga_regs[] = {
+	PER_SIZE_REG_SEQ(W_XGA, H_XGA, 0, 0, 2),
+	{ CTRLI,    0x00},
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_sxga_regs[] = {
+	PER_SIZE_REG_SEQ(W_SXGA, H_SXGA, 0, 0, 2),
+	{ CTRLI,    0x00},
+	{ R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_uxga_regs[] = {
+	PER_SIZE_REG_SEQ(W_UXGA, H_UXGA, 0, 0, 0),
+	{ CTRLI,    0x00},
+	{ R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE },
+	ENDMARKER,
+};
+
+#define OV2640_SIZE(n, w, h, r) \
+	{.name = n, .width = w , .height = h, .regs = r }
+
+static const struct ov2640_win_size ov2640_supported_win_sizes[] = {
+	OV2640_SIZE("QCIF", W_QCIF, H_QCIF, ov2640_qcif_regs),
+	OV2640_SIZE("QVGA", W_QVGA, H_QVGA, ov2640_qvga_regs),
+	OV2640_SIZE("CIF", W_CIF, H_CIF, ov2640_cif_regs),
+	OV2640_SIZE("VGA", W_VGA, H_VGA, ov2640_vga_regs),
+	OV2640_SIZE("SVGA", W_SVGA, H_SVGA, ov2640_svga_regs),
+	OV2640_SIZE("XGA", W_XGA, H_XGA, ov2640_xga_regs),
+	OV2640_SIZE("SXGA", W_SXGA, H_SXGA, ov2640_sxga_regs),
+	OV2640_SIZE("UXGA", W_UXGA, H_UXGA, ov2640_uxga_regs),
+};
+
+/*
+ * Register settings for pixel formats
+ */
+static const struct regval_list ov2640_format_change_preamble_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_yuv422_regs[] = {
+	{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 },
+	{ 0xD7, 0x01 },
+	{ 0x33, 0xa0 },
+	{ 0xe1, 0x67 },
+	{ RESET,  0x00 },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_rgb565_regs[] = {
+	{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 },
+	{ 0xd7, 0x03 },
+	{ RESET,  0x00 },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static enum v4l2_mbus_pixelcode ov2640_codes[] = {
+	V4L2_MBUS_FMT_UYVY8_2X8,
+	V4L2_MBUS_FMT_RGB565_2X8_LE,
+};
+
+/*
+ * Supported controls
+ */
+static const struct v4l2_queryctrl ov2640_controls[] = {
+	{
+		.id		= V4L2_CID_VFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Flip Vertically",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 0,
+	}, {
+		.id		= V4L2_CID_HFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Flip Horizontally",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 0,
+	},
+};
+
+/*
+ * General functions
+ */
+static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct ov2640_priv,
+			    subdev);
+}
+
+static int ov2640_write_array(struct i2c_client *client,
+			      const struct regval_list *vals)
+{
+	int ret;
+
+	while ((vals->reg_num != 0xff) || (vals->value != 0xff)) {
+		ret = i2c_smbus_write_byte_data(client,
+						vals->reg_num, vals->value);
+		dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x",
+			 vals->reg_num, vals->value);
+
+		if (ret < 0)
+			return ret;
+		vals++;
+	}
+	return 0;
+}
+
+static int ov2640_mask_set(struct i2c_client *client,
+			   u8  reg, u8  mask, u8  set)
+{
+	s32 val = i2c_smbus_read_byte_data(client, reg);
+	if (val < 0)
+		return val;
+
+	val &= ~mask;
+	val |= set & mask;
+
+	dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int ov2640_reset(struct i2c_client *client)
+{
+	int ret;
+	const struct regval_list reset_seq[] = {
+		{BANK_SEL, BANK_SEL_SENS},
+		{COM7, COM7_SRST},
+		ENDMARKER,
+	};
+
+	ret = ov2640_write_array(client, reset_seq);
+	if (ret)
+		goto err;
+
+	msleep(5);
+err:
+	dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret);
+	return ret;
+}
+
+/*
+ * soc_camera_ops functions
+ */
+static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	return 0;
+}
+
+static int ov2640_set_bus_param(struct soc_camera_device *icd,
+				unsigned long flags)
+{
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
+
+	/* Only one width bit may be set */
+	if (!is_power_of_2(width_flag))
+		return -EINVAL;
+
+	if (icl->set_bus_param)
+		return icl->set_bus_param(icl, width_flag);
+
+	/*
+	 * Without board specific bus width settings we support only the
+	 * sensors native bus width witch are tested working
+	 */
+	if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
+		return 0;
+
+	return 0;
+}
+
+static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
+{
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
+		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
+		SOCAM_DATA_ACTIVE_HIGH;
+
+	if (icl->query_bus_param)
+		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
+	else
+		flags |= SOCAM_DATAWIDTH_10;
+
+	return soc_camera_apply_sensor_flags(icl, flags);
+}
+
+static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		ctrl->value = priv->flag_vflip;
+		break;
+	case V4L2_CID_HFLIP:
+		ctrl->value = priv->flag_hflip;
+		break;
+	}
+	return 0;
+}
+
+static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+	int ret = 0;
+	u8 val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
+		priv->flag_vflip = ctrl->value ? 1 : 0;
+		ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
+		break;
+	case V4L2_CID_HFLIP:
+		val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
+		priv->flag_hflip = ctrl->value ? 1 : 0;
+		ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
+		break;
+	}
+
+	return ret;
+}
+
+static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	id->ident    = priv->model;
+	id->revision = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov2640_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+	reg->size = 1;
+	if (reg->reg > 0xff)
+		return -EINVAL;
+
+	ret = i2c_smbus_read_byte_data(client, reg->reg);
+	if (ret < 0)
+		return ret;
+
+	reg->val = ret;
+
+	return 0;
+}
+
+static int ov2640_s_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg > 0xff ||
+	    reg->val > 0xff)
+		return -EINVAL;
+
+	return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
+}
+#endif
+
+/* Select the nearest higher resolution for capture */
+static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height)
+{
+	int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1;
+
+	for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) {
+		if (ov2640_supported_win_sizes[i].width  >= *width &&
+		    ov2640_supported_win_sizes[i].height >= *height) {
+			*width = ov2640_supported_win_sizes[i].width;
+			*height = ov2640_supported_win_sizes[i].height;
+			return &ov2640_supported_win_sizes[i];
+		}
+	}
+
+	*width = ov2640_supported_win_sizes[default_size].width;
+	*height = ov2640_supported_win_sizes[default_size].height;
+	return &ov2640_supported_win_sizes[default_size];
+}
+
+static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height,
+			     enum v4l2_mbus_pixelcode code)
+{
+	struct ov2640_priv       *priv = to_ov2640(client);
+	const struct regval_list *selected_cfmt_regs;
+	int ret;
+
+	/* select win */
+	priv->win = ov2640_select_win(width, height);
+
+	/* select format */
+	priv->cfmt_code = 0;
+	switch (code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		dev_dbg(&client->dev, "%s: Selected cfmt RGB565", __func__);
+		selected_cfmt_regs = ov2640_rgb565_regs;
+		break;
+	default:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		dev_dbg(&client->dev, "%s: Selected cfmt YUV422", __func__);
+		selected_cfmt_regs = ov2640_yuv422_regs;
+	}
+
+	/* reset hardware */
+	ov2640_reset(client);
+
+	/* initialize the sensor with default data */
+	dev_dbg(&client->dev, "%s: Init default", __func__);
+	ret = ov2640_write_array(client, ov2640_init_regs);
+	if (ret < 0)
+		goto err;
+
+	/* select preamble */
+	dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name);
+	ret = ov2640_write_array(client, ov2640_size_change_preamble_regs);
+	if (ret < 0)
+		goto err;
+
+	/* set size win */
+	ret = ov2640_write_array(client, priv->win->regs);
+	if (ret < 0)
+		goto err;
+
+	/* cfmt preamble */
+	dev_dbg(&client->dev, "%s: Set cfmt", __func__);
+	ret = ov2640_write_array(client, ov2640_format_change_preamble_regs);
+	if (ret < 0)
+		goto err;
+
+	/* set cfmt */
+	ret = ov2640_write_array(client, selected_cfmt_regs);
+	if (ret < 0)
+		goto err;
+
+	priv->cfmt_code = code;
+	*width = priv->win->width;
+	*height = priv->win->height;
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "%s: Error %d", __func__, ret);
+	ov2640_reset(client);
+	priv->win = NULL;
+
+	return ret;
+}
+
+static int ov2640_g_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	if (!priv->win) {
+		u32 width = W_SVGA, height = H_SVGA;
+		int ret = ov2640_set_params(client, &width, &height,
+					    V4L2_MBUS_FMT_UYVY8_2X8);
+		if (ret < 0)
+			return ret;
+	}
+
+	mf->width	= priv->win->width;
+	mf->height	= priv->win->height;
+	mf->code	= priv->cfmt_code;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov2640_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+
+	ret = ov2640_set_params(client, &mf->width, &mf->height, mf->code);
+
+	return ret;
+}
+
+static int ov2640_try_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *mf)
+{
+	const struct ov2640_win_size *win;
+
+	/*
+	 * select suitable win
+	 */
+	win = ov2640_select_win(&mf->width, &mf->height);
+
+	mf->field	= V4L2_FIELD_NONE;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+
+	return 0;
+}
+
+static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+			   enum v4l2_mbus_pixelcode *code)
+{
+	if (index >= ARRAY_SIZE(ov2640_codes))
+		return -EINVAL;
+
+	*code = ov2640_codes[index];
+	return 0;
+}
+
+static int ov2640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	a->c.left	= 0;
+	a->c.top	= 0;
+	a->c.width	= W_UXGA;
+	a->c.height	= H_UXGA;
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= W_UXGA;
+	a->bounds.height		= H_UXGA;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int ov2640_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
+{
+	struct ov2640_priv *priv = to_ov2640(client);
+	u8 pid, ver, midh, midl;
+	const char *devname;
+	int ret;
+
+	/*
+	 * we must have a parent by now. And it cannot be a wrong one.
+	 * So this entire test is completely redundant.
+	 */
+	if (!icd->dev.parent ||
+	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
+		dev_err(&client->dev, "Parent missing or invalid!\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/*
+	 * check and show product ID and manufacturer ID
+	 */
+	i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS);
+	pid  = i2c_smbus_read_byte_data(client, PID);
+	ver  = i2c_smbus_read_byte_data(client, VER);
+	midh = i2c_smbus_read_byte_data(client, MIDH);
+	midl = i2c_smbus_read_byte_data(client, MIDL);
+
+	switch (VERSION(pid, ver)) {
+	case PID_OV2640:
+		devname     = "ov2640";
+		priv->model = V4L2_IDENT_OV2640;
+		break;
+	default:
+		dev_err(&client->dev,
+			"Product ID error %x:%x\n", pid, ver);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	dev_info(&client->dev,
+		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+		 devname, pid, ver, midh, midl);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static struct soc_camera_ops ov2640_ops = {
+	.set_bus_param		= ov2640_set_bus_param,
+	.query_bus_param	= ov2640_query_bus_param,
+	.controls		= ov2640_controls,
+	.num_controls		= ARRAY_SIZE(ov2640_controls),
+};
+
+static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
+	.g_ctrl		= ov2640_g_ctrl,
+	.s_ctrl		= ov2640_s_ctrl,
+	.g_chip_ident	= ov2640_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= ov2640_g_register,
+	.s_register	= ov2640_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
+	.s_stream	= ov2640_s_stream,
+	.g_mbus_fmt	= ov2640_g_fmt,
+	.s_mbus_fmt	= ov2640_s_fmt,
+	.try_mbus_fmt	= ov2640_try_fmt,
+	.cropcap	= ov2640_cropcap,
+	.g_crop		= ov2640_g_crop,
+	.enum_mbus_fmt	= ov2640_enum_fmt,
+};
+
+static struct v4l2_subdev_ops ov2640_subdev_ops = {
+	.core	= &ov2640_subdev_core_ops,
+	.video	= &ov2640_subdev_video_ops,
+};
+
+/*
+ * i2c_driver functions
+ */
+static int ov2640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov2640_priv        *priv;
+	struct soc_camera_device  *icd = client->dev.platform_data;
+	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
+	struct soc_camera_link    *icl;
+	int                        ret;
+
+	if (!icd) {
+		dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
+	if (!icl) {
+		dev_err(&adapter->dev,
+			"OV2640: Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&adapter->dev,
+			"OV2640: I2C-Adapter doesn't support SMBUS\n");
+		return -EIO;
+	}
+
+	priv = kzalloc(sizeof(struct ov2640_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&adapter->dev,
+			"Failed to allocate memory for private data!\n");
+		return -ENOMEM;
+	}
+
+	priv->info = icl->priv;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
+
+	icd->ops = &ov2640_ops;
+
+	ret = ov2640_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		kfree(priv);
+	} else {
+		dev_info(&adapter->dev, "OV2640 Probed\n");
+	}
+
+	return ret;
+}
+
+static int ov2640_remove(struct i2c_client *client)
+{
+	struct ov2640_priv       *priv = to_ov2640(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+
+	icd->ops = NULL;
+	kfree(priv);
+	return 0;
+}
+
+static const struct i2c_device_id ov2640_id[] = {
+	{ "ov2640", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov2640_id);
+
+static struct i2c_driver ov2640_i2c_driver = {
+	.driver = {
+		.name = "ov2640",
+	},
+	.probe    = ov2640_probe,
+	.remove   = ov2640_remove,
+	.id_table = ov2640_id,
+};
+
+/*
+ * Module functions
+ */
+static int __init ov2640_module_init(void)
+{
+	return i2c_add_driver(&ov2640_i2c_driver);
+}
+
+static void __exit ov2640_module_exit(void)
+{
+	i2c_del_driver(&ov2640_i2c_driver);
+}
+
+module_init(ov2640_module_init);
+module_exit(ov2640_module_exit);
+
+MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor");
+MODULE_AUTHOR("Alberto Panizzo");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 96e442c1b2ef2ba9476e5da2607ba666ce09664d Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Thu, 2 Dec 2010 07:43:37 -0300
Subject: [media] soc_camera: Add the ability to bind regulators to soc_camedra
 devices

In certain machines, camera devices are supplied directly
by a number of regulators. This patch add the ability to drive
these regulators directly by the soc_camera driver.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 86 ++++++++++++++++++++++++++++++----------
 1 file changed, 65 insertions(+), 21 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index aba4ce92a86b..a66811b43710 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 #include <linux/vmalloc.h>
@@ -43,6 +44,51 @@ static LIST_HEAD(hosts);
 static LIST_HEAD(devices);
 static DEFINE_MUTEX(list_lock);		/* Protects the list of hosts */
 
+static int soc_camera_power_set(struct soc_camera_device *icd,
+				struct soc_camera_link *icl,
+				int power_on)
+{
+	int ret;
+
+	if (power_on) {
+		ret = regulator_bulk_enable(icl->num_regulators,
+					    icl->regulators);
+		if (ret < 0) {
+			dev_err(&icd->dev, "Cannot enable regulators\n");
+			return ret;
+		}
+
+		if (icl->power)
+			ret = icl->power(icd->pdev, power_on);
+		if (ret < 0) {
+			dev_err(&icd->dev,
+				"Platform failed to power-on the camera.\n");
+
+			regulator_bulk_disable(icl->num_regulators,
+					       icl->regulators);
+			return ret;
+		}
+	} else {
+		ret = 0;
+		if (icl->power)
+			ret = icl->power(icd->pdev, 0);
+		if (ret < 0) {
+			dev_err(&icd->dev,
+				"Platform failed to power-off the camera.\n");
+			return ret;
+		}
+
+		ret = regulator_bulk_disable(icl->num_regulators,
+					     icl->regulators);
+		if (ret < 0) {
+			dev_err(&icd->dev, "Cannot disable regulators\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
 	struct soc_camera_device *icd, unsigned int fourcc)
 {
@@ -369,11 +415,9 @@ static int soc_camera_open(struct file *file)
 			},
 		};
 
-		if (icl->power) {
-			ret = icl->power(icd->pdev, 1);
-			if (ret < 0)
-				goto epower;
-		}
+		ret = soc_camera_power_set(icd, icl, 1);
+		if (ret < 0)
+			goto epower;
 
 		/* The camera could have been already on, try to reset */
 		if (icl->reset)
@@ -417,8 +461,7 @@ esfmt:
 eresume:
 	ici->ops->remove(icd);
 eiciadd:
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 epower:
 	icd->use_count--;
 	module_put(ici->ops->owner);
@@ -440,8 +483,7 @@ static int soc_camera_close(struct file *file)
 
 		ici->ops->remove(icd);
 
-		if (icl->power)
-			icl->power(icd->pdev, 0);
+		soc_camera_power_set(icd, icl, 0);
 	}
 
 	if (icd->streamer == file)
@@ -908,14 +950,14 @@ static int soc_camera_probe(struct device *dev)
 
 	dev_info(dev, "Probing %s\n", dev_name(dev));
 
-	if (icl->power) {
-		ret = icl->power(icd->pdev, 1);
-		if (ret < 0) {
-			dev_err(dev,
-				"Platform failed to power-on the camera.\n");
-			goto epower;
-		}
-	}
+	ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
+				 icl->regulators);
+	if (ret < 0)
+		goto ereg;
+
+	ret = soc_camera_power_set(icd, icl, 1);
+	if (ret < 0)
+		goto epower;
 
 	/* The camera could have been already on, try to reset */
 	if (icl->reset)
@@ -994,8 +1036,7 @@ static int soc_camera_probe(struct device *dev)
 
 	ici->ops->remove(icd);
 
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 
 	mutex_unlock(&icd->video_lock);
 
@@ -1017,9 +1058,10 @@ eadddev:
 evdc:
 	ici->ops->remove(icd);
 eadd:
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 epower:
+	regulator_bulk_free(icl->num_regulators, icl->regulators);
+ereg:
 	return ret;
 }
 
@@ -1052,6 +1094,8 @@ static int soc_camera_remove(struct device *dev)
 	}
 	soc_camera_free_user_formats(icd);
 
+	regulator_bulk_free(icl->num_regulators, icl->regulators);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 21d33014108671cc6b02feda088f32bf26ce532d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Mariusz=20Bia=C5=82o=C5=84czyk?= <manio@skyboo.net>
Date: Wed, 29 Dec 2010 19:48:43 -0300
Subject: [media] ir-nec-decoder: fix repeat key issue
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixing the problem with NEC protocol and repeating keys under the following
circumstances. The problem occurs when there is a repeat code without
properly decoded scancode. This leads to repeat the wrong (last decoded)
scancode.

An example from real life:
I am pressing volume down, then several minutes later i am pressing
volume up, but the real scancode is wrongly decoded and only a repeat
event is emitted, so as a result volume is going down while i am holding
volume up button.

The patch fixes above problem using rc_keyup timeout (as pointed by Mauro).
It just prevents key repeats if they appear after rc_keyup.

Signed-off-by: Mariusz Białończyk <manio@skyboo.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/rc/ir-nec-decoder.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 5d15c31288b9..7b58b4a1729b 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -88,9 +88,13 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			data->state = STATE_BIT_PULSE;
 			return 0;
 		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			rc_repeat(dev);
-			IR_dprintk(1, "Repeat last key\n");
-			data->state = STATE_TRAILER_PULSE;
+			if (!dev->keypressed) {
+				IR_dprintk(1, "Discarding last key repeat: event after key up\n");
+			} else {
+				rc_repeat(dev);
+				IR_dprintk(1, "Repeat last key\n");
+				data->state = STATE_TRAILER_PULSE;
+			}
 			return 0;
 		}
 
-- 
cgit v1.2.3


From ebce9a3331f4dd1f39856dc4b79f539eb25f7f64 Mon Sep 17 00:00:00 2001
From: "Igor M. Liplianin" <liplianin@me.by>
Date: Fri, 31 Dec 2010 02:04:38 -0300
Subject: [media] cx23885, cimax2.c: Fix case of two CAM insertion irq

For example  boot up with two CAM inserted.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cimax2.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index c95e7bc14745..209b971bd267 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -368,7 +368,7 @@ static void netup_read_ci_status(struct work_struct *work)
 				DVB_CA_EN50221_POLL_CAM_READY;
 		else
 			state->status = 0;
-	};
+	}
 }
 
 /* CI irq handler */
@@ -377,16 +377,24 @@ int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
 	struct cx23885_tsport *port = NULL;
 	struct netup_ci_state *state = NULL;
 
-	if (pci_status & PCI_MSK_GPIO0)
-		port = &dev->ts1;
-	else if (pci_status & PCI_MSK_GPIO1)
-		port = &dev->ts2;
-	else /* who calls ? */
+	ci_dbg_print("%s:\n", __func__);
+
+	if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1)))
 		return 0;
 
-	state = port->port_priv;
+	if (pci_status & PCI_MSK_GPIO0) {
+		port = &dev->ts1;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI0\n", __func__);
+	}
 
-	schedule_work(&state->work);
+	if (pci_status & PCI_MSK_GPIO1) {
+		port = &dev->ts2;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI1\n", __func__);
+	}
 
 	return 1;
 }
-- 
cgit v1.2.3


From 9d1da730ee17e712c25c0b1e51653048f92d2385 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Sun, 26 Dec 2010 10:23:58 -0300
Subject: [media] DVB: IR support for TechnoTrend CT-3650

Based on Waling Dijkstra's discovery that the IR works the same as
on the TT-1500, this patch has been rewritten to fit with the
rc_core infrastructure.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/ttusb2.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index a6de489a6a39..0d4709ff9cbb 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -43,6 +43,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct ttusb2_state {
 	u8 id;
+	u16 last_rc_key;
 };
 
 static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
@@ -128,6 +129,33 @@ static struct i2c_algorithm ttusb2_i2c_algo = {
 	.functionality = ttusb2_i2c_func,
 };
 
+/* command to poll IR receiver (copied from pctv452e.c) */
+#define CMD_GET_IR_CODE     0x1b
+
+/* IR */
+static int tt3650_rc_query(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */
+	struct ttusb2_state *st = d->priv;
+	ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx));
+	if (ret != 0)
+		return ret;
+
+	if (rx[8] & 0x01) {
+		/* got a "press" event */
+		st->last_rc_key = (rx[3] << 8) | rx[2];
+		deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
+		rc_keydown(d->rc_dev, st->last_rc_key, 0);
+	} else if (st->last_rc_key) {
+		rc_keyup(d->rc_dev);
+		st->last_rc_key = 0;
+	}
+
+	return 0;
+}
+
+
 /* Callbacks for DVB USB */
 static int ttusb2_identify_state (struct usb_device *udev, struct
 		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
@@ -345,6 +373,13 @@ static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
 
 	.size_of_priv = sizeof(struct ttusb2_state),
 
+	.rc.core = {
+		.rc_interval      = 150, /* Less than IR_KEYPRESS_TIMEOUT */
+		.rc_codes         = RC_MAP_TT_1500,
+		.rc_query         = tt3650_rc_query,
+		.allowed_protos   = RC_TYPE_UNKNOWN,
+	},
+
 	.num_adapters = 1,
 	.adapter = {
 		{
-- 
cgit v1.2.3


From 4f77b86c665ff6a167edfdf152ebfa997783fa17 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 31 Dec 2010 12:25:32 -0300
Subject: [media] ngene: fix compile warning

drivers/media/dvb/ngene/ngene-core.c: In function 'ngene_start':
drivers/media/dvb/ngene/ngene-core.c:1308:16: warning: unused variable 'flags'

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ngene/ngene-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index be71f915e2a3..dc073bdc623a 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -1304,7 +1304,6 @@ static void ngene_stop(struct ngene *dev)
 static int ngene_start(struct ngene *dev)
 {
 	int stat;
-	unsigned long flags;
 	int i;
 
 	pci_set_master(dev->pci_dev);
@@ -1337,6 +1336,8 @@ static int ngene_start(struct ngene *dev)
 #ifdef CONFIG_PCI_MSI
 	/* enable MSI if kernel and card support it */
 	if (pci_msi_enabled() && dev->card_info->msi_supported) {
+		unsigned long flags;
+
 		ngwritel(0, NGENE_INT_ENABLE);
 		free_irq(dev->pci_dev->irq, dev);
 		stat = pci_enable_msi(dev->pci_dev);
-- 
cgit v1.2.3


From 0c8fc77e481a3bfc243336085a3fe1fc71f9c1fb Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 31 Dec 2010 12:26:53 -0300
Subject: [media] tda18218: fix compile warning

drivers/media/common/tuners/tda18218.c: In function 'tda18218_wr_regs':
drivers/media/common/tuners/tda18218.c:58:5: warning: 'ret' may be used uninitialized in this function

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18218.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c
index 8da1fdeddaa7..aacfe2387e28 100644
--- a/drivers/media/common/tuners/tda18218.c
+++ b/drivers/media/common/tuners/tda18218.c
@@ -28,7 +28,7 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 /* write multiple registers */
 static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
 {
-	int ret;
+	int ret = 0;
 	u8 buf[1+len], quotient, remainder, i, msg_len, msg_len_max;
 	struct i2c_msg msg[1] = {
 		{
-- 
cgit v1.2.3


From 1a5e5af0d2111fdc39c6f2275ed2a9e2e6dd69e2 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 31 Dec 2010 12:30:56 -0300
Subject: [media] zoran: fix compiler warning

drivers/media/video/zoran/zoran_driver.c: In function 'zoran_dqbuf':
drivers/media/video/zoran/zoran_driver.c:2197:21: warning: 'bs.frame' may be used uninitialized in this function

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran/zoran_driver.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index fe84f17c65c4..7c3921de9589 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2216,6 +2216,7 @@ static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
 			res = -EAGAIN;
 			goto dqbuf_unlock_and_return;
 		}
+		bs.frame = 0; /* suppress compiler warning */
 		res = jpg_sync(fh, &bs);
 		if (res)
 			goto dqbuf_unlock_and_return;
-- 
cgit v1.2.3


From 36f54ff67bc78c6d8dc4a90ac257165e05fdd8da Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 31 Dec 2010 12:34:32 -0300
Subject: [media] v4l2-compat-ioctl32: fix compile warning

drivers/media/video/v4l2-compat-ioctl32.c: In function 'get_v4l2_format32':
drivers/media/video/v4l2-compat-ioctl32.c:169:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type'
drivers/media/video/v4l2-compat-ioctl32.c: In function 'put_v4l2_format32':
drivers/media/video/v4l2-compat-ioctl32.c:200:2: warning: case value '0' not in enumerated type 'enum v4l2_buf_type'

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-compat-ioctl32.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 65e6f133dd35..dc82eb83c1d4 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -165,8 +165,6 @@ static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
 		if (copy_from_user(kp, up, sizeof(kp->fmt.raw_data)))
 			return -EFAULT;
 		return 0;
-	case 0:
-		return -EINVAL;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 								kp->type);
@@ -196,8 +194,6 @@ static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
 		if (copy_to_user(up, kp, sizeof(up->fmt.raw_data)))
 			return -EFAULT;
 		return 0;
-	case 0:
-		return -EINVAL;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 								kp->type);
-- 
cgit v1.2.3


From e3c92215198cb6aa00ad38db2780faa6b72e0a3f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 6 Jan 2011 08:16:04 -0200
Subject: [media] radio-aimslab.c: Fix gcc 4.5+ bug

gcc 4.5+ doesn't properly evaluate some inlined expressions.
A previous patch were proposed by Andrew Morton using noinline.
However, the entire inlined function is bogus, so let's just
remove it and be happy.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/radio-aimslab.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 05e832f61c3e..6cc5d130fbc8 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -31,7 +31,6 @@
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
-#include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/io.h>		/* outb, outb_p			*/
@@ -71,27 +70,17 @@ static struct rtrack rtrack_card;
 
 /* local things */
 
-static void sleep_delay(long n)
-{
-	/* Sleep nicely for 'n' uS */
-	int d = n / msecs_to_jiffies(1000);
-	if (!d)
-		udelay(n);
-	else
-		msleep(jiffies_to_msecs(d));
-}
-
 static void rt_decvol(struct rtrack *rt)
 {
 	outb(0x58, rt->io);		/* volume down + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
 static void rt_incvol(struct rtrack *rt)
 {
 	outb(0x98, rt->io);		/* volume up + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
@@ -120,7 +109,7 @@ static int rt_setvol(struct rtrack *rt, int vol)
 
 	if (vol == 0) {			/* volume = 0 means mute the card */
 		outb(0x48, rt->io);	/* volume down but still "on"	*/
-		sleep_delay(2000000);	/* make sure it's totally down	*/
+		msleep(2000);	/* make sure it's totally down	*/
 		outb(0xd0, rt->io);	/* volume steady, off		*/
 		rt->curvol = 0;		/* track the volume state!	*/
 		mutex_unlock(&rt->lock);
@@ -155,7 +144,7 @@ static void send_0_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+  1, rt->io);  /* on + wr-enable + data low */
 		outb_p(128+64+16+8+2+1, rt->io);  /* clock */
 	}
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static void send_1_byte(struct rtrack *rt)
@@ -169,7 +158,7 @@ static void send_1_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+4+2+1, rt->io); /* clock */
 	}
 
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static int rt_setfreq(struct rtrack *rt, unsigned long freq)
@@ -420,7 +409,7 @@ static int __init rtrack_init(void)
 
 	/* this ensures that the volume is all the way down  */
 	outb(0x48, rt->io);		/* volume down but still "on"	*/
-	sleep_delay(2000000);	/* make sure it's totally down	*/
+	msleep(2000);	/* make sure it's totally down	*/
 	outb(0xc0, rt->io);		/* steady volume, mute card	*/
 
 	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-- 
cgit v1.2.3