From 6dfc6d250d0b7ebaa6423c44dcd09fcfe68deabd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 23 May 2006 12:00:46 +0200 Subject: [MTD] NAND modularize ECC First step of modularizing ECC support. - Move ECC related functionality into a seperate embedded data structure - Get rid of the hardware dependend constants to simplify new ECC models Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/sharpsl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/mtd/nand/sharpsl.c') diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 60e10c0d6980..5554d0b97c8c 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -201,15 +201,17 @@ static int __init sharpsl_nand_init(void) /* 15 us command delay time */ this->chip_delay = 15; /* set eccmode using hardware ECC */ - this->eccmode = NAND_ECC_HW3_256; + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 256; + this->ecc.bytes = 3; this->badblock_pattern = &sharpsl_bbt; if (machine_is_akita() || machine_is_borzoi()) { this->badblock_pattern = &sharpsl_akita_bbt; this->autooob = &akita_oobinfo; } - this->enable_hwecc = sharpsl_nand_enable_hwecc; - this->calculate_ecc = sharpsl_nand_calculate_ecc; - this->correct_data = nand_correct_data; + this->ecc.hwctl = sharpsl_nand_enable_hwecc; + this->ecc.calculate = sharpsl_nand_calculate_ecc; + this->ecc.correct = nand_correct_data; /* Scan to find existence of the device */ err = nand_scan(sharpsl_mtd, 1); -- cgit v1.2.3