From 8fb6b0908176704a3ea22005e8a9fa3ebf35b5be Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 16 May 2011 01:39:01 -0700 Subject: bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Move the Apple drivers into driver/net/ethernet/apple/ and make the necessary Kconfig and Makefile changes. CC: Paul Mackerras CC: Paul Mackerras CC: Russell Nelson Signed-off-by: Jeff Kirsher --- drivers/net/cs89x0.c | 1913 -------------------------------------------------- 1 file changed, 1913 deletions(-) delete mode 100644 drivers/net/cs89x0.c (limited to 'drivers/net/cs89x0.c') diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c deleted file mode 100644 index 537a4b2e2020..000000000000 --- a/drivers/net/cs89x0.c +++ /dev/null @@ -1,1913 +0,0 @@ -/* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0 - * driver for linux. - */ - -/* - Written 1996 by Russell Nelson, with reference to skeleton.c - written 1993-1994 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached at nelson@crynwr.com, Crynwr - Software, 521 Pleasant Valley Rd., Potsdam, NY 13676 - - Changelog: - - Mike Cruse : mcruse@cti-ltd.com - : Changes for Linux 2.0 compatibility. - : Added dev_id parameter in net_interrupt(), - : request_irq() and free_irq(). Just NULL for now. - - Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros - : in net_open() and net_close() so kerneld would know - : that the module is in use and wouldn't eject the - : driver prematurely. - - Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c - : as an example. Disabled autoprobing in init_module(), - : not a good thing to do to other devices while Linux - : is running from all accounts. - - Russ Nelson : Jul 13 1998. Added RxOnly DMA support. - - Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility. - : email: ethernet@crystal.cirrus.com - - Alan Cox : Removed 1.2 support, added 2.1 extra counters. - - Andrew Morton : Kernel 2.3.48 - : Handle kmalloc() failures - : Other resource allocation fixes - : Add SMP locks - : Integrate Russ Nelson's ALLOW_DMA functionality back in. - : If ALLOW_DMA is true, make DMA runtime selectable - : Folded in changes from Cirrus (Melody Lee - : ) - : Don't call netif_wake_queue() in net_send_packet() - : Fixed an out-of-mem bug in dma_rx() - : Updated Documentation/networking/cs89x0.txt - - Andrew Morton : Kernel 2.3.99-pre1 - : Use skb_reserve to longword align IP header (two places) - : Remove a delay loop from dma_rx() - : Replace '100' with HZ - : Clean up a couple of skb API abuses - : Added 'cs89x0_dma=N' kernel boot option - : Correctly initialise lp->lock in non-module compile - - Andrew Morton : Kernel 2.3.99-pre4-1 - : MOD_INC/DEC race fix (see - : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html) - - Andrew Morton : Kernel 2.4.0-test7-pre2 - : Enhanced EEPROM support to cover more devices, - : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch - : (Jason Gunthorpe ) - - Andrew Morton : Kernel 2.4.0-test11-pre4 - : Use dev->name in request_*() (Andrey Panin) - : Fix an error-path memleak in init_module() - : Preserve return value from request_irq() - : Fix type of `media' module parm (Keith Owens) - : Use SET_MODULE_OWNER() - : Tidied up strange request_irq() abuse in net_open(). - - Andrew Morton : Kernel 2.4.3-pre1 - : Request correct number of pages for DMA (Hugh Dickens) - : Select PP_ChipID _after_ unregister_netdev in cleanup_module() - : because unregister_netdev() calls get_stats. - : Make `version[]' __initdata - : Uninlined the read/write reg/word functions. - - Oskar Schirmer : oskar@scara.com - : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=) - - Deepak Saxena : dsaxena@plexity.net - : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support - - Dmitry Pervushin : dpervushin@ru.mvista.com - : PNX010X platform support - - Deepak Saxena : dsaxena@plexity.net - : Intel IXDP2351 platform support - - Dmitry Pervushin : dpervushin@ru.mvista.com - : PNX010X platform support - - Domenico Andreoli : cavokz@gmail.com - : QQ2440 platform support - -*/ - -/* Always include 'config.h' first in case the user wants to turn on - or override something. */ -#include - -/* - * Set this to zero to disable DMA code - * - * Note that even if DMA is turned off we still support the 'dma' and 'use_dma' - * module options so we don't break any startup scripts. - */ -#ifndef CONFIG_ISA_DMA_API -#define ALLOW_DMA 0 -#else -#define ALLOW_DMA 1 -#endif - -/* - * Set this to zero to remove all the debug statements via - * dead code elimination - */ -#define DEBUGGING 1 - -/* - Sources: - - Crynwr packet driver epktisa. - - Crystal Semiconductor data sheets. - -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#if ALLOW_DMA -#include -#endif - -#include "cs89x0.h" - -static char version[] __initdata = -"cs89x0.c: v2.4.3-pre1 Russell Nelson , Andrew Morton\n"; - -#define DRV_NAME "cs89x0" - -/* First, a few definitions that the brave might change. - A zero-terminated list of I/O addresses to be probed. Some special flags.. - Addr & 1 = Read back the address port, look for signature and reset - the page window before probing - Addr & 3 = Reset the page window and probe - The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space, - but it is possible that a Cirrus board could be plugged into the ISA - slots. */ -/* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps - them to system IRQ numbers. This mapping is card specific and is set to - the configuration of the Cirrus Eval board for this chip. */ -#if defined(CONFIG_MACH_IXDP2351) -static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; -static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; -#elif defined(CONFIG_ARCH_IXDP2X01) -static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; -static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; -#elif defined(CONFIG_MACH_QQ2440) -#include -static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 }; -static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 }; -#elif defined(CONFIG_MACH_MX31ADS) -#include -static unsigned int netcard_portlist[] __used __initdata = { - PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0 -}; -static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0}; -#else -static unsigned int netcard_portlist[] __used __initdata = - { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; -static unsigned int cs8900_irq_map[] = {10,11,12,5}; -#endif - -#if DEBUGGING -static unsigned int net_debug = DEBUGGING; -#else -#define net_debug 0 /* gcc will remove all the debug code for us */ -#endif - -/* The number of low I/O ports used by the ethercard. */ -#define NETCARD_IO_EXTENT 16 - -/* we allow the user to override various values normally set in the EEPROM */ -#define FORCE_RJ45 0x0001 /* pick one of these three */ -#define FORCE_AUI 0x0002 -#define FORCE_BNC 0x0004 - -#define FORCE_AUTO 0x0010 /* pick one of these three */ -#define FORCE_HALF 0x0020 -#define FORCE_FULL 0x0030 - -/* Information that need to be kept for each board. */ -struct net_local { - int chip_type; /* one of: CS8900, CS8920, CS8920M */ - char chip_revision; /* revision letter of the chip ('A'...) */ - int send_cmd; /* the proper send command: TX_NOW, TX_AFTER_381, or TX_AFTER_ALL */ - int auto_neg_cnf; /* auto-negotiation word from EEPROM */ - int adapter_cnf; /* adapter configuration from EEPROM */ - int isa_config; /* ISA configuration from EEPROM */ - int irq_map; /* IRQ map from EEPROM */ - int rx_mode; /* what mode are we in? 0, RX_MULTCAST_ACCEPT, or RX_ALL_ACCEPT */ - int curr_rx_cfg; /* a copy of PP_RxCFG */ - int linectl; /* either 0 or LOW_RX_SQUELCH, depending on configuration. */ - int send_underrun; /* keep track of how many underruns in a row we get */ - int force; /* force various values; see FORCE* above. */ - spinlock_t lock; -#if ALLOW_DMA - int use_dma; /* Flag: we're using dma */ - int dma; /* DMA channel */ - int dmasize; /* 16 or 64 */ - unsigned char *dma_buff; /* points to the beginning of the buffer */ - unsigned char *end_dma_buff; /* points to the end of the buffer */ - unsigned char *rx_dma_ptr; /* points to the next packet */ -#endif -}; - -/* Index to functions, as function prototypes. */ - -static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular); -static int net_open(struct net_device *dev); -static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id); -static void set_multicast_list(struct net_device *dev); -static void net_timeout(struct net_device *dev); -static void net_rx(struct net_device *dev); -static int net_close(struct net_device *dev); -static struct net_device_stats *net_get_stats(struct net_device *dev); -static void reset_chip(struct net_device *dev); -static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer); -static int get_eeprom_cksum(int off, int len, int *buffer); -static int set_mac_address(struct net_device *dev, void *addr); -static void count_rx_errors(int status, struct net_device *dev); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void net_poll_controller(struct net_device *dev); -#endif -#if ALLOW_DMA -static void get_dma_channel(struct net_device *dev); -static void release_dma_buff(struct net_local *lp); -#endif - -/* Example routines you must write ;->. */ -#define tx_done(dev) 1 - -/* - * Permit 'cs89x0_dma=N' in the kernel boot environment - */ -#if !defined(MODULE) && (ALLOW_DMA != 0) -static int g_cs89x0_dma; - -static int __init dma_fn(char *str) -{ - g_cs89x0_dma = simple_strtol(str,NULL,0); - return 1; -} - -__setup("cs89x0_dma=", dma_fn); -#endif /* !defined(MODULE) && (ALLOW_DMA != 0) */ - -#ifndef MODULE -static int g_cs89x0_media__force; - -static int __init media_fn(char *str) -{ - if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45; - else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI; - else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC; - return 1; -} - -__setup("cs89x0_media=", media_fn); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - Return 0 on success. - */ - -struct net_device * __init cs89x0_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - int irq; - int io; - - if (!dev) - return ERR_PTR(-ENODEV); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - - if (net_debug) - printk("cs89x0:cs89x0_probe(0x%x)\n", io); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = cs89x0_probe1(dev, io, 0); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = netcard_portlist; *port; port++) { - if (cs89x0_probe1(dev, *port, 0) == 0) - break; - dev->irq = irq; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - return dev; -out: - free_netdev(dev); - printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n"); - return ERR_PTR(err); -} -#endif - -#if defined(CONFIG_MACH_IXDP2351) -static u16 -readword(unsigned long base_addr, int portno) -{ - return __raw_readw(base_addr + (portno << 1)); -} - -static void -writeword(unsigned long base_addr, int portno, u16 value) -{ - __raw_writew(value, base_addr + (portno << 1)); -} -#elif defined(CONFIG_ARCH_IXDP2X01) -static u16 -readword(unsigned long base_addr, int portno) -{ - return __raw_readl(base_addr + (portno << 1)); -} - -static void -writeword(unsigned long base_addr, int portno, u16 value) -{ - __raw_writel(value, base_addr + (portno << 1)); -} -#else -static u16 -readword(unsigned long base_addr, int portno) -{ - return inw(base_addr + portno); -} - -static void -writeword(unsigned long base_addr, int portno, u16 value) -{ - outw(value, base_addr + portno); -} -#endif - -static void -readwords(unsigned long base_addr, int portno, void *buf, int length) -{ - u8 *buf8 = (u8 *)buf; - - do { - u16 tmp16; - - tmp16 = readword(base_addr, portno); - *buf8++ = (u8)tmp16; - *buf8++ = (u8)(tmp16 >> 8); - } while (--length); -} - -static void -writewords(unsigned long base_addr, int portno, void *buf, int length) -{ - u8 *buf8 = (u8 *)buf; - - do { - u16 tmp16; - - tmp16 = *buf8++; - tmp16 |= (*buf8++) << 8; - writeword(base_addr, portno, tmp16); - } while (--length); -} - -static u16 -readreg(struct net_device *dev, u16 regno) -{ - writeword(dev->base_addr, ADD_PORT, regno); - return readword(dev->base_addr, DATA_PORT); -} - -static void -writereg(struct net_device *dev, u16 regno, u16 value) -{ - writeword(dev->base_addr, ADD_PORT, regno); - writeword(dev->base_addr, DATA_PORT, value); -} - -static int __init -wait_eeprom_ready(struct net_device *dev) -{ - int timeout = jiffies; - /* check to see if the EEPROM is ready, a timeout is used - - just in case EEPROM is ready when SI_BUSY in the - PP_SelfST is clear */ - while(readreg(dev, PP_SelfST) & SI_BUSY) - if (jiffies - timeout >= 40) - return -1; - return 0; -} - -static int __init -get_eeprom_data(struct net_device *dev, int off, int len, int *buffer) -{ - int i; - - if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len); - for (i = 0; i < len; i++) { - if (wait_eeprom_ready(dev) < 0) return -1; - /* Now send the EEPROM read command and EEPROM location to read */ - writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD); - if (wait_eeprom_ready(dev) < 0) return -1; - buffer[i] = readreg(dev, PP_EEData); - if (net_debug > 3) printk("%04x ", buffer[i]); - } - if (net_debug > 3) printk("\n"); - return 0; -} - -static int __init -get_eeprom_cksum(int off, int len, int *buffer) -{ - int i, cksum; - - cksum = 0; - for (i = 0; i < len; i++) - cksum += buffer[i]; - cksum &= 0xffff; - if (cksum == 0) - return 0; - return -1; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling receive - used by netconsole and other diagnostic tools - * to allow network i/o with interrupts disabled. - */ -static void net_poll_controller(struct net_device *dev) -{ - disable_irq(dev->irq); - net_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static const struct net_device_ops net_ops = { - .ndo_open = net_open, - .ndo_stop = net_close, - .ndo_tx_timeout = net_timeout, - .ndo_start_xmit = net_send_packet, - .ndo_get_stats = net_get_stats, - .ndo_set_multicast_list = set_multicast_list, - .ndo_set_mac_address = set_mac_address, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = net_poll_controller, -#endif - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probes avoids doing writes, and - verifies that the correct device exists and functions. - Return 0 on success. - */ - -static int __init -cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) -{ - struct net_local *lp = netdev_priv(dev); - static unsigned version_printed; - int i; - int tmp; - unsigned rev_type = 0; - int eeprom_buff[CHKSUM_LEN]; - int retval; - - /* Initialize the device structure. */ - if (!modular) { - memset(lp, 0, sizeof(*lp)); - spin_lock_init(&lp->lock); -#ifndef MODULE -#if ALLOW_DMA - if (g_cs89x0_dma) { - lp->use_dma = 1; - lp->dma = g_cs89x0_dma; - lp->dmasize = 16; /* Could make this an option... */ - } -#endif - lp->force = g_cs89x0_media__force; -#endif - -#if defined(CONFIG_MACH_QQ2440) - lp->force |= FORCE_RJ45 | FORCE_FULL; -#endif - } - - /* Grab the region so we can find another board if autoIRQ fails. */ - /* WTF is going on here? */ - if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { - printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n", - DRV_NAME, ioaddr, NETCARD_IO_EXTENT); - retval = -EBUSY; - goto out1; - } - - /* if they give us an odd I/O address, then do ONE write to - the address port, to get it back to address zero, where we - expect to find the EISA signature word. An IO with a base of 0x3 - will skip the test for the ADD_PORT. */ - if (ioaddr & 1) { - if (net_debug > 1) - printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr); - if ((ioaddr & 2) != 2) - if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) { - printk(KERN_ERR "%s: bad signature 0x%x\n", - dev->name, readword(ioaddr & ~3, ADD_PORT)); - retval = -ENODEV; - goto out2; - } - } - - ioaddr &= ~3; - printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n", - ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); - writeword(ioaddr, ADD_PORT, PP_ChipID); - - tmp = readword(ioaddr, DATA_PORT); - if (tmp != CHIP_EISA_ID_SIG) { - printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!=" - CHIP_EISA_ID_SIG_STR "\n", - dev->name, ioaddr, DATA_PORT, tmp); - retval = -ENODEV; - goto out2; - } - - /* Fill in the 'dev' fields. */ - dev->base_addr = ioaddr; - - /* get the chip type */ - rev_type = readreg(dev, PRODUCT_ID_ADD); - lp->chip_type = rev_type &~ REVISON_BITS; - lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; - - /* Check the chip type and revision in order to set the correct send command - CS8920 revision C and CS8900 revision F can use the faster send. */ - lp->send_cmd = TX_AFTER_381; - if (lp->chip_type == CS8900 && lp->chip_revision >= 'F') - lp->send_cmd = TX_NOW; - if (lp->chip_type != CS8900 && lp->chip_revision >= 'C') - lp->send_cmd = TX_NOW; - - if (net_debug && version_printed++ == 0) - printk(version); - - printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ", - dev->name, - lp->chip_type==CS8900?'0':'2', - lp->chip_type==CS8920M?"M":"", - lp->chip_revision, - dev->base_addr); - - reset_chip(dev); - - /* Here we read the current configuration of the chip. If there - is no Extended EEPROM then the idea is to not disturb the chip - configuration, it should have been correctly setup by automatic - EEPROM read on reset. So, if the chip says it read the EEPROM - the driver will always do *something* instead of complain that - adapter_cnf is 0. */ - - - if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == - (EEPROM_OK|EEPROM_PRESENT)) { - /* Load the MAC. */ - for (i=0; i < ETH_ALEN/2; i++) { - unsigned int Addr; - Addr = readreg(dev, PP_IA+i*2); - dev->dev_addr[i*2] = Addr & 0xFF; - dev->dev_addr[i*2+1] = Addr >> 8; - } - - /* Load the Adapter Configuration. - Note: Barring any more specific information from some - other source (ie EEPROM+Schematics), we would not know - how to operate a 10Base2 interface on the AUI port. - However, since we do read the status of HCB1 and use - settings that always result in calls to control_dc_dc(dev,0) - a BNC interface should work if the enable pin - (dc/dc converter) is on HCB1. It will be called AUI - however. */ - - lp->adapter_cnf = 0; - i = readreg(dev, PP_LineCTL); - /* Preserve the setting of the HCB1 pin. */ - if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL)) - lp->adapter_cnf |= A_CNF_DC_DC_POLARITY; - /* Save the sqelch bit */ - if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH) - lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH; - /* Check if the card is in 10Base-t only mode */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0) - lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T; - /* Check if the card is in AUI only mode */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY) - lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI; - /* Check if the card is in Auto mode. */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET) - lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T | - A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO; - - if (net_debug > 1) - printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n", - dev->name, i, lp->adapter_cnf); - - /* IRQ. Other chips already probe, see below. */ - if (lp->chip_type == CS8900) - lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK; - - printk( "[Cirrus EEPROM] "); - } - - printk("\n"); - - /* First check to see if an EEPROM is attached. */ - - if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) - printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); - else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) { - printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n"); - } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) { - /* Check if the chip was able to read its own configuration starting - at 0 in the EEPROM*/ - if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) != - (EEPROM_OK|EEPROM_PRESENT)) - printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n"); - - } else { - /* This reads an extended EEPROM that is not documented - in the CS8900 datasheet. */ - - /* get transmission control word but keep the autonegotiation bits */ - if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2]; - /* Store adapter configuration */ - if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2]; - /* Store ISA configuration */ - lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2]; - dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8; - - /* eeprom_buff has 32-bit ints, so we can't just memcpy it */ - /* store the initial memory base address */ - for (i = 0; i < ETH_ALEN/2; i++) { - dev->dev_addr[i*2] = eeprom_buff[i]; - dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8; - } - if (net_debug > 1) - printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n", - dev->name, lp->adapter_cnf); - } - - /* allow them to force multiple transceivers. If they force multiple, autosense */ - { - int count = 0; - if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; } - if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; } - if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; } - if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; } - else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; } - else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; } - else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; } - } - - if (net_debug > 1) - printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n", - dev->name, lp->force, lp->adapter_cnf); - - /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */ - - /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */ - - /* FIXME: we don't set the Ethernet address on the command line. Use - ifconfig IFACE hw ether AABBCCDDEEFF */ - - printk(KERN_INFO "cs89x0 media %s%s%s", - (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"", - (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"", - (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":""); - - lp->irq_map = 0xffff; - - /* If this is a CS8900 then no pnp soft */ - if (lp->chip_type != CS8900 && - /* Check if the ISA IRQ has been set */ - (i = readreg(dev, PP_CS8920_ISAINT) & 0xff, - (i != 0 && i < CS8920_NO_INTS))) { - if (!dev->irq) - dev->irq = i; - } else { - i = lp->isa_config & INT_NO_MASK; - if (lp->chip_type == CS8900) { -#ifdef CONFIG_CS89x0_NONISA_IRQ - i = cs8900_irq_map[0]; -#else - /* Translate the IRQ using the IRQ mapping table. */ - if (i >= ARRAY_SIZE(cs8900_irq_map)) - printk("\ncs89x0: invalid ISA interrupt number %d\n", i); - else - i = cs8900_irq_map[i]; - - lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */ - } else { - int irq_map_buff[IRQ_MAP_LEN/2]; - - if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA, - IRQ_MAP_LEN/2, - irq_map_buff) >= 0) { - if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT) - lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8); - } -#endif - } - if (!dev->irq) - dev->irq = i; - } - - printk(" IRQ %d", dev->irq); - -#if ALLOW_DMA - if (lp->use_dma) { - get_dma_channel(dev); - printk(", DMA %d", dev->dma); - } - else -#endif - { - printk(", programmed I/O"); - } - - /* print the ethernet address. */ - printk(", MAC %pM", dev->dev_addr); - - dev->netdev_ops = &net_ops; - dev->watchdog_timeo = HZ; - - printk("\n"); - if (net_debug) - printk("cs89x0_probe1() successful\n"); - - retval = register_netdev(dev); - if (retval) - goto out3; - return 0; -out3: - writeword(dev->base_addr, ADD_PORT, PP_ChipID); -out2: - release_region(ioaddr & ~3, NETCARD_IO_EXTENT); -out1: - return retval; -} - - -/********************************* - * This page contains DMA routines -**********************************/ - -#if ALLOW_DMA - -#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17) - -static void -get_dma_channel(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - if (lp->dma) { - dev->dma = lp->dma; - lp->isa_config |= ISA_RxDMA; - } else { - if ((lp->isa_config & ANY_ISA_DMA) == 0) - return; - dev->dma = lp->isa_config & DMA_NO_MASK; - if (lp->chip_type == CS8900) - dev->dma += 5; - if (dev->dma < 5 || dev->dma > 7) { - lp->isa_config &= ~ANY_ISA_DMA; - return; - } - } -} - -static void -write_dma(struct net_device *dev, int chip_type, int dma) -{ - struct net_local *lp = netdev_priv(dev); - if ((lp->isa_config & ANY_ISA_DMA) == 0) - return; - if (chip_type == CS8900) { - writereg(dev, PP_CS8900_ISADMA, dma-5); - } else { - writereg(dev, PP_CS8920_ISADMA, dma); - } -} - -static void -set_dma_cfg(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - if (lp->use_dma) { - if ((lp->isa_config & ANY_ISA_DMA) == 0) { - if (net_debug > 3) - printk("set_dma_cfg(): no DMA\n"); - return; - } - if (lp->isa_config & ISA_RxDMA) { - lp->curr_rx_cfg |= RX_DMA_ONLY; - if (net_debug > 3) - printk("set_dma_cfg(): RX_DMA_ONLY\n"); - } else { - lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */ - if (net_debug > 3) - printk("set_dma_cfg(): AUTO_RX_DMA\n"); - } - } -} - -static int -dma_bufcfg(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - if (lp->use_dma) - return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0; - else - return 0; -} - -static int -dma_busctl(struct net_device *dev) -{ - int retval = 0; - struct net_local *lp = netdev_priv(dev); - if (lp->use_dma) { - if (lp->isa_config & ANY_ISA_DMA) - retval |= RESET_RX_DMA; /* Reset the DMA pointer */ - if (lp->isa_config & DMA_BURST) - retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */ - if (lp->dmasize == 64) - retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */ - retval |= MEMORY_ON; /* we need memory enabled to use DMA. */ - } - return retval; -} - -static void -dma_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - struct sk_buff *skb; - int status, length; - unsigned char *bp = lp->rx_dma_ptr; - - status = bp[0] + (bp[1]<<8); - length = bp[2] + (bp[3]<<8); - bp += 4; - if (net_debug > 5) { - printk( "%s: receiving DMA packet at %lx, status %x, length %x\n", - dev->name, (unsigned long)bp, status, length); - } - if ((status & RX_OK) == 0) { - count_rx_errors(status, dev); - goto skip_this_frame; - } - - /* Malloc up new buffer. */ - skb = dev_alloc_skb(length + 2); - if (skb == NULL) { - if (net_debug) /* I don't think we want to do this to a stressed system */ - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - - /* AKPM: advance bp to the next frame */ -skip_this_frame: - bp += (length + 3) & ~3; - if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024; - lp->rx_dma_ptr = bp; - return; - } - skb_reserve(skb, 2); /* longword align L3 header */ - - if (bp + length > lp->end_dma_buff) { - int semi_cnt = lp->end_dma_buff - bp; - memcpy(skb_put(skb,semi_cnt), bp, semi_cnt); - memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff, - length - semi_cnt); - } else { - memcpy(skb_put(skb,length), bp, length); - } - bp += (length + 3) & ~3; - if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024; - lp->rx_dma_ptr = bp; - - if (net_debug > 3) { - printk( "%s: received %d byte DMA packet of type %x\n", - dev->name, length, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); - } - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; -} - -#endif /* ALLOW_DMA */ - -static void __init reset_chip(struct net_device *dev) -{ -#if !defined(CONFIG_MACH_MX31ADS) -#if !defined(CS89x0_NONISA_IRQ) - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; -#endif /* CS89x0_NONISA_IRQ */ - int reset_start_time; - - writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); - - /* wait 30 ms */ - msleep(30); - -#if !defined(CS89x0_NONISA_IRQ) - if (lp->chip_type != CS8900) { - /* Hardware problem requires PNP registers to be reconfigured after a reset */ - writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT); - outb(dev->irq, ioaddr + DATA_PORT); - outb(0, ioaddr + DATA_PORT + 1); - - writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB); - outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT); - outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1); - } -#endif /* CS89x0_NONISA_IRQ */ - - /* Wait until the chip is reset */ - reset_start_time = jiffies; - while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) - ; -#endif /* !CONFIG_MACH_MX31ADS */ -} - - -static void -control_dc_dc(struct net_device *dev, int on_not_off) -{ - struct net_local *lp = netdev_priv(dev); - unsigned int selfcontrol; - int timenow = jiffies; - /* control the DC to DC convertor in the SelfControl register. - Note: This is hooked up to a general purpose pin, might not - always be a DC to DC convertor. */ - - selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */ - if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off) - selfcontrol |= HCB1; - else - selfcontrol &= ~HCB1; - writereg(dev, PP_SelfCTL, selfcontrol); - - /* Wait for the DC/DC converter to power up - 500ms */ - while (jiffies - timenow < HZ) - ; -} - -#define DETECTED_NONE 0 -#define DETECTED_RJ45H 1 -#define DETECTED_RJ45F 2 -#define DETECTED_AUI 3 -#define DETECTED_BNC 4 - -static int -detect_tp(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int timenow = jiffies; - int fdx; - - if (net_debug > 1) printk("%s: Attempting TP\n", dev->name); - - /* If connected to another full duplex capable 10-Base-T card the link pulses - seem to be lost when the auto detect bit in the LineCTL is set. - To overcome this the auto detect bit will be cleared whilst testing the - 10-Base-T interface. This would not be necessary for the sparrow chip but - is simpler to do it anyway. */ - writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY); - control_dc_dc(dev, 0); - - /* Delay for the hardware to work out if the TP cable is present - 150ms */ - for (timenow = jiffies; jiffies - timenow < 15; ) - ; - if ((readreg(dev, PP_LineST) & LINK_OK) == 0) - return DETECTED_NONE; - - if (lp->chip_type == CS8900) { - switch (lp->force & 0xf0) { -#if 0 - case FORCE_AUTO: - printk("%s: cs8900 doesn't autonegotiate\n",dev->name); - return DETECTED_NONE; -#endif - /* CS8900 doesn't support AUTO, change to HALF*/ - case FORCE_AUTO: - lp->force &= ~FORCE_AUTO; - lp->force |= FORCE_HALF; - break; - case FORCE_HALF: - break; - case FORCE_FULL: - writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900); - break; - } - fdx = readreg(dev, PP_TestCTL) & FDX_8900; - } else { - switch (lp->force & 0xf0) { - case FORCE_AUTO: - lp->auto_neg_cnf = AUTO_NEG_ENABLE; - break; - case FORCE_HALF: - lp->auto_neg_cnf = 0; - break; - case FORCE_FULL: - lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX; - break; - } - - writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK); - - if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) { - printk(KERN_INFO "%s: negotiating duplex...\n",dev->name); - while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) { - if (jiffies - timenow > 4000) { - printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n"); - break; - } - } - } - fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE; - } - if (fdx) - return DETECTED_RJ45F; - else - return DETECTED_RJ45H; -} - -/* send a test packet - return true if carrier bits are ok */ -static int -send_test_pkt(struct net_device *dev) -{ - char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0, - 0, 46, /* A 46 in network order */ - 0, 0, /* DSAP=0 & SSAP=0 fields */ - 0xf3, 0 /* Control (Test Req + P bit set) */ }; - long timenow = jiffies; - - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON); - - memcpy(test_packet, dev->dev_addr, ETH_ALEN); - memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN); - - writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL); - writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN); - - /* Test to see if the chip has allocated memory for the packet */ - while (jiffies - timenow < 5) - if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW) - break; - if (jiffies - timenow >= 5) - return 0; /* this shouldn't happen */ - - /* Write the contents of the packet */ - writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1); - - if (net_debug > 1) printk("Sending test packet "); - /* wait a couple of jiffies for packet to be received */ - for (timenow = jiffies; jiffies - timenow < 3; ) - ; - if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) { - if (net_debug > 1) printk("succeeded\n"); - return 1; - } - if (net_debug > 1) printk("failed\n"); - return 0; -} - - -static int -detect_aui(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name); - control_dc_dc(dev, 0); - - writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY); - - if (send_test_pkt(dev)) - return DETECTED_AUI; - else - return DETECTED_NONE; -} - -static int -detect_bnc(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name); - control_dc_dc(dev, 1); - - writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY); - - if (send_test_pkt(dev)) - return DETECTED_BNC; - else - return DETECTED_NONE; -} - - -static void -write_irq(struct net_device *dev, int chip_type, int irq) -{ - int i; - - if (chip_type == CS8900) { - /* Search the mapping table for the corresponding IRQ pin. */ - for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) - if (cs8900_irq_map[i] == irq) - break; - /* Not found */ - if (i == ARRAY_SIZE(cs8900_irq_map)) - i = 3; - writereg(dev, PP_CS8900_ISAINT, i); - } else { - writereg(dev, PP_CS8920_ISAINT, irq); - } -} - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ - -/* AKPM: do we need to do any locking here? */ - -static int -net_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int result = 0; - int i; - int ret; - - if (dev->irq < 2) { - /* Allow interrupts to be generated by the chip */ -/* Cirrus' release had this: */ -#if 0 - writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ ); -#endif -/* And 2.3.47 had this: */ - writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON); - - for (i = 2; i < CS8920_NO_INTS; i++) { - if ((1 << i) & lp->irq_map) { - if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) { - dev->irq = i; - write_irq(dev, lp->chip_type, i); - /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */ - break; - } - } - } - - if (i >= CS8920_NO_INTS) { - writereg(dev, PP_BusCTL, 0); /* disable interrupts. */ - printk(KERN_ERR "cs89x0: can't get an interrupt\n"); - ret = -EAGAIN; - goto bad_out; - } - } - else - { -#ifndef CONFIG_CS89x0_NONISA_IRQ - if (((1 << dev->irq) & lp->irq_map) == 0) { - printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", - dev->name, dev->irq, lp->irq_map); - ret = -EAGAIN; - goto bad_out; - } -#endif -/* FIXME: Cirrus' release had this: */ - writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ ); -/* And 2.3.47 had this: */ -#if 0 - writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON); -#endif - write_irq(dev, lp->chip_type, dev->irq); - ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev); - if (ret) { - printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq); - goto bad_out; - } - } - -#if ALLOW_DMA - if (lp->use_dma) { - if (lp->isa_config & ANY_ISA_DMA) { - unsigned long flags; - lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL, - get_order(lp->dmasize * 1024)); - - if (!lp->dma_buff) { - printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize); - goto release_irq; - } - if (net_debug > 1) { - printk( "%s: dma %lx %lx\n", - dev->name, - (unsigned long)lp->dma_buff, - (unsigned long)isa_virt_to_bus(lp->dma_buff)); - } - if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS || - !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) { - printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name); - goto release_irq; - } - memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */ - if (request_dma(dev->dma, dev->name)) { - printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma); - goto release_irq; - } - write_dma(dev, lp->chip_type, dev->dma); - lp->rx_dma_ptr = lp->dma_buff; - lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024; - spin_lock_irqsave(&lp->lock, flags); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */ - set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff)); - set_dma_count(dev->dma, lp->dmasize*1024); - enable_dma(dev->dma); - spin_unlock_irqrestore(&lp->lock, flags); - } - } -#endif /* ALLOW_DMA */ - - /* set the Ethernet address */ - for (i=0; i < ETH_ALEN/2; i++) - writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); - - /* while we're testing the interface, leave interrupts disabled */ - writereg(dev, PP_BusCTL, MEMORY_ON); - - /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */ - if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH)) - lp->linectl = LOW_RX_SQUELCH; - else - lp->linectl = 0; - - /* check to make sure that they have the "right" hardware available */ - switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break; - case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break; - case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break; - default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2); - } - if (!result) { - printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); -release_dma: -#if ALLOW_DMA - free_dma(dev->dma); -release_irq: - release_dma_buff(lp); -#endif - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON)); - free_irq(dev->irq, dev); - ret = -EAGAIN; - goto bad_out; - } - - /* set the hardware to the configured choice */ - switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: - result = detect_tp(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */ - } - break; - case A_CNF_MEDIA_AUI: - result = detect_aui(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */ - } - break; - case A_CNF_MEDIA_10B_2: - result = detect_bnc(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */ - } - break; - case A_CNF_MEDIA_AUTO: - writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET); - if (lp->adapter_cnf & A_CNF_10B_T) - if ((result = detect_tp(dev)) != DETECTED_NONE) - break; - if (lp->adapter_cnf & A_CNF_AUI) - if ((result = detect_aui(dev)) != DETECTED_NONE) - break; - if (lp->adapter_cnf & A_CNF_10B_2) - if ((result = detect_bnc(dev)) != DETECTED_NONE) - break; - printk(KERN_ERR "%s: no media detected\n", dev->name); - goto release_dma; - } - switch(result) { - case DETECTED_NONE: - printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name); - goto release_dma; - case DETECTED_RJ45H: - printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name); - break; - case DETECTED_RJ45F: - printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name); - break; - case DETECTED_AUI: - printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name); - break; - case DETECTED_BNC: - printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name); - break; - } - - /* Turn on both receive and transmit operations */ - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON); - - /* Receive only error free packets addressed to this card */ - lp->rx_mode = 0; - writereg(dev, PP_RxCTL, DEF_RX_ACCEPT); - - lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL; - - if (lp->isa_config & STREAM_TRANSFER) - lp->curr_rx_cfg |= RX_STREAM_ENBL; -#if ALLOW_DMA - set_dma_cfg(dev); -#endif - writereg(dev, PP_RxCFG, lp->curr_rx_cfg); - - writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL | - TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL); - - writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL | -#if ALLOW_DMA - dma_bufcfg(dev) | -#endif - TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL); - - /* now that we've got our act together, enable everything */ - writereg(dev, PP_BusCTL, ENABLE_IRQ - | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */ -#if ALLOW_DMA - | dma_busctl(dev) -#endif - ); - netif_start_queue(dev); - if (net_debug > 1) - printk("cs89x0: net_open() succeeded\n"); - return 0; -bad_out: - return ret; -} - -static void net_timeout(struct net_device *dev) -{ - /* If we get here, some higher level has decided we are broken. - There should really be a "kick me" function call instead. */ - if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict ?" : "network cable problem"); - /* Try to restart the adaptor. */ - netif_wake_queue(dev); -} - -static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned long flags; - - if (net_debug > 3) { - printk("%s: sent %d byte packet of type %x\n", - dev->name, skb->len, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); - } - - /* keep the upload from being interrupted, since we - ask the chip to start transmitting before the - whole packet has been completely uploaded. */ - - spin_lock_irqsave(&lp->lock, flags); - netif_stop_queue(dev); - - /* initiate a transmit sequence */ - writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd); - writeword(dev->base_addr, TX_LEN_PORT, skb->len); - - /* Test to see if the chip has allocated memory for the packet */ - if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) { - /* - * Gasp! It hasn't. But that shouldn't happen since - * we're waiting for TxOk, so return 1 and requeue this packet. - */ - - spin_unlock_irqrestore(&lp->lock, flags); - if (net_debug) printk("cs89x0: Tx buffer not free!\n"); - return NETDEV_TX_BUSY; - } - /* Write the contents of the packet */ - writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1); - spin_unlock_irqrestore(&lp->lock, flags); - dev->stats.tx_bytes += skb->len; - dev_kfree_skb (skb); - - /* - * We DO NOT call netif_wake_queue() here. - * We also DO NOT call netif_start_queue(). - * - * Either of these would cause another bottom half run through - * net_send_packet() before this packet has fully gone out. That causes - * us to hit the "Gasp!" above and the send is rescheduled. it runs like - * a dog. We just return and wait for the Tx completion interrupt handler - * to restart the netdevice layer - */ - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ - -static irqreturn_t net_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - /* we MUST read all the events out of the ISQ, otherwise we'll never - get interrupted again. As a consequence, we can't have any limit - on the number of times we loop in the interrupt handler. The - hardware guarantees that eventually we'll run out of events. Of - course, if you're on a slow machine, and packets are arriving - faster than you can read them off, you're screwed. Hasta la - vista, baby! */ - while ((status = readword(dev->base_addr, ISQ_PORT))) { - if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status); - handled = 1; - switch(status & ISQ_EVENT_MASK) { - case ISQ_RECEIVER_EVENT: - /* Got a packet(s). */ - net_rx(dev); - break; - case ISQ_TRANSMITTER_EVENT: - dev->stats.tx_packets++; - netif_wake_queue(dev); /* Inform upper layers. */ - if ((status & ( TX_OK | - TX_LOST_CRS | - TX_SQE_ERROR | - TX_LATE_COL | - TX_16_COL)) != TX_OK) { - if ((status & TX_OK) == 0) - dev->stats.tx_errors++; - if (status & TX_LOST_CRS) - dev->stats.tx_carrier_errors++; - if (status & TX_SQE_ERROR) - dev->stats.tx_heartbeat_errors++; - if (status & TX_LATE_COL) - dev->stats.tx_window_errors++; - if (status & TX_16_COL) - dev->stats.tx_aborted_errors++; - } - break; - case ISQ_BUFFER_EVENT: - if (status & READY_FOR_TX) { - /* we tried to transmit a packet earlier, - but inexplicably ran out of buffers. - That shouldn't happen since we only ever - load one packet. Shrug. Do the right - thing anyway. */ - netif_wake_queue(dev); /* Inform upper layers. */ - } - if (status & TX_UNDERRUN) { - if (net_debug > 0) printk("%s: transmit underrun\n", dev->name); - lp->send_underrun++; - if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381; - else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL; - /* transmit cycle is done, although - frame wasn't transmitted - this - avoids having to wait for the upper - layers to timeout on us, in the - event of a tx underrun */ - netif_wake_queue(dev); /* Inform upper layers. */ - } -#if ALLOW_DMA - if (lp->use_dma && (status & RX_DMA)) { - int count = readreg(dev, PP_DmaFrameCnt); - while(count) { - if (net_debug > 5) - printk("%s: receiving %d DMA frames\n", dev->name, count); - if (net_debug > 2 && count >1) - printk("%s: receiving %d DMA frames\n", dev->name, count); - dma_rx(dev); - if (--count == 0) - count = readreg(dev, PP_DmaFrameCnt); - if (net_debug > 2 && count > 0) - printk("%s: continuing with %d DMA frames\n", dev->name, count); - } - } -#endif - break; - case ISQ_RX_MISS_EVENT: - dev->stats.rx_missed_errors += (status >> 6); - break; - case ISQ_TX_COL_EVENT: - dev->stats.collisions += (status >> 6); - break; - } - } - return IRQ_RETVAL(handled); -} - -static void -count_rx_errors(int status, struct net_device *dev) -{ - dev->stats.rx_errors++; - if (status & RX_RUNT) - dev->stats.rx_length_errors++; - if (status & RX_EXTRA_DATA) - dev->stats.rx_length_errors++; - if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA|RX_RUNT))) - /* per str 172 */ - dev->stats.rx_crc_errors++; - if (status & RX_DRIBBLE) - dev->stats.rx_frame_errors++; -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void -net_rx(struct net_device *dev) -{ - struct sk_buff *skb; - int status, length; - - int ioaddr = dev->base_addr; - status = readword(ioaddr, RX_FRAME_PORT); - length = readword(ioaddr, RX_FRAME_PORT); - - if ((status & RX_OK) == 0) { - count_rx_errors(status, dev); - return; - } - - /* Malloc up new buffer. */ - skb = dev_alloc_skb(length + 2); - if (skb == NULL) { -#if 0 /* Again, this seems a cruel thing to do */ - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); -#endif - dev->stats.rx_dropped++; - return; - } - skb_reserve(skb, 2); /* longword align L3 header */ - - readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1); - if (length & 1) - skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT); - - if (net_debug > 3) { - printk( "%s: received %d byte packet of type %x\n", - dev->name, length, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); - } - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; -} - -#if ALLOW_DMA -static void release_dma_buff(struct net_local *lp) -{ - if (lp->dma_buff) { - free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024)); - lp->dma_buff = NULL; - } -} -#endif - -/* The inverse routine to net_open(). */ -static int -net_close(struct net_device *dev) -{ -#if ALLOW_DMA - struct net_local *lp = netdev_priv(dev); -#endif - - netif_stop_queue(dev); - - writereg(dev, PP_RxCFG, 0); - writereg(dev, PP_TxCFG, 0); - writereg(dev, PP_BufCFG, 0); - writereg(dev, PP_BusCTL, 0); - - free_irq(dev->irq, dev); - -#if ALLOW_DMA - if (lp->use_dma && lp->dma) { - free_dma(dev->dma); - release_dma_buff(lp); - } -#endif - - /* Update the statistics here. */ - return 0; -} - -/* Get the current statistics. This may be called with the card open or - closed. */ -static struct net_device_stats * -net_get_stats(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&lp->lock, flags); - /* Update the statistics from the device registers. */ - dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6); - dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6); - spin_unlock_irqrestore(&lp->lock, flags); - - return &dev->stats; -} - -static void set_multicast_list(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&lp->lock, flags); - if(dev->flags&IFF_PROMISC) - { - lp->rx_mode = RX_ALL_ACCEPT; - } - else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) - { - /* The multicast-accept list is initialized to accept-all, and we - rely on higher-level filtering for now. */ - lp->rx_mode = RX_MULTCAST_ACCEPT; - } - else - lp->rx_mode = 0; - - writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode); - - /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0)); - spin_unlock_irqrestore(&lp->lock, flags); -} - - -static int set_mac_address(struct net_device *dev, void *p) -{ - int i; - struct sockaddr *addr = p; - - if (netif_running(dev)) - return -EBUSY; - - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - - if (net_debug) - printk("%s: Setting MAC address to %pM.\n", - dev->name, dev->dev_addr); - - /* set the Ethernet address */ - for (i=0; i < ETH_ALEN/2; i++) - writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); - - return 0; -} - -#ifdef MODULE - -static struct net_device *dev_cs89x0; - -/* - * Support the 'debug' module parm even if we're compiled for non-debug to - * avoid breaking someone's startup scripts - */ - -static int io; -static int irq; -static int debug; -static char media[8]; -static int duplex=-1; - -static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */ -static int dma; -static int dmasize=16; /* or 64 */ - -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(debug, int, 0); -module_param_string(media, media, sizeof(media), 0); -module_param(duplex, int, 0); -module_param(dma , int, 0); -module_param(dmasize , int, 0); -module_param(use_dma , int, 0); -MODULE_PARM_DESC(io, "cs89x0 I/O base address"); -MODULE_PARM_DESC(irq, "cs89x0 IRQ number"); -#if DEBUGGING -MODULE_PARM_DESC(debug, "cs89x0 debug level (0-6)"); -#else -MODULE_PARM_DESC(debug, "(ignored)"); -#endif -MODULE_PARM_DESC(media, "Set cs89x0 adapter(s) media type(s) (rj45,bnc,aui)"); -/* No other value than -1 for duplex seems to be currently interpreted */ -MODULE_PARM_DESC(duplex, "(ignored)"); -#if ALLOW_DMA -MODULE_PARM_DESC(dma , "cs89x0 ISA DMA channel; ignored if use_dma=0"); -MODULE_PARM_DESC(dmasize , "cs89x0 DMA size in kB (16,64); ignored if use_dma=0"); -MODULE_PARM_DESC(use_dma , "cs89x0 using DMA (0-1)"); -#else -MODULE_PARM_DESC(dma , "(ignored)"); -MODULE_PARM_DESC(dmasize , "(ignored)"); -MODULE_PARM_DESC(use_dma , "(ignored)"); -#endif - -MODULE_AUTHOR("Mike Cruse, Russwll Nelson , Andrew Morton"); -MODULE_LICENSE("GPL"); - - -/* -* media=t - specify media type - or media=2 - or media=aui - or medai=auto -* duplex=0 - specify forced half/full/autonegotiate duplex -* debug=# - debug level - - -* Default Chip Configuration: - * DMA Burst = enabled - * IOCHRDY Enabled = enabled - * UseSA = enabled - * CS8900 defaults to half-duplex if not specified on command-line - * CS8920 defaults to autoneg if not specified on command-line - * Use reset defaults for other config parameters - -* Assumptions: - * media type specified is supported (circuitry is present) - * if memory address is > 1MB, then required mem decode hw is present - * if 10B-2, then agent other than driver will enable DC/DC converter - (hw or software util) - - -*/ - -int __init init_module(void) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - struct net_local *lp; - int ret = 0; - -#if DEBUGGING - net_debug = debug; -#else - debug = 0; -#endif - if (!dev) - return -ENOMEM; - - dev->irq = irq; - dev->base_addr = io; - lp = netdev_priv(dev); - -#if ALLOW_DMA - if (use_dma) { - lp->use_dma = use_dma; - lp->dma = dma; - lp->dmasize = dmasize; - } -#endif - - spin_lock_init(&lp->lock); - - /* boy, they'd better get these right */ - if (!strcmp(media, "rj45")) - lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T; - else if (!strcmp(media, "aui")) - lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI; - else if (!strcmp(media, "bnc")) - lp->adapter_cnf = A_CNF_MEDIA_10B_2 | A_CNF_10B_2; - else - lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T; - - if (duplex==-1) - lp->auto_neg_cnf = AUTO_NEG_ENABLE; - - if (io == 0) { - printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n"); - printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n"); - ret = -EPERM; - goto out; - } else if (io <= 0x1ff) { - ret = -ENXIO; - goto out; - } - -#if ALLOW_DMA - if (use_dma && dmasize != 16 && dmasize != 64) { - printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize); - ret = -EPERM; - goto out; - } -#endif - ret = cs89x0_probe1(dev, io, 1); - if (ret) - goto out; - - dev_cs89x0 = dev; - return 0; -out: - free_netdev(dev); - return ret; -} - -void __exit -cleanup_module(void) -{ - unregister_netdev(dev_cs89x0); - writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID); - release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT); - free_netdev(dev_cs89x0); -} -#endif /* MODULE */ - -/* - * Local variables: - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 8 - * tab-width: 8 - * End: - * - */ -- cgit v1.2.3