From 1609559547ae0ddc2e4829c7f78ac2c4869875b9 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 29 Jan 2009 17:29:15 -0800 Subject: smsc9420: fix interrupt signalling test failures smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/smsc9420.c') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c7..d801900a5036 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; -- cgit v1.2.3