From 3efd8026ec12eab85cd76946a44e13b6062c09e2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 13 Dec 2018 14:09:56 +0100 Subject: pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration [ Upstream commit 1b99d0c80bbe1810572c2cb77b90f67886adfa8d ] The Port F Control Register 3 (PFCR3) contains only a single field. However, counting from left to right, it is the fourth field, not the first field. Insert the missing dummy configuration values (3 fields of 16 values) to fix this. The descriptor for the Port F Control Register 0 (PFCR0) lacks the description for the 4th field (PF0 Mode, PF0MD[2:0]). Add the missing configuration values to fix this. Fixes: a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support") Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Sasha Levin --- drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/pinctrl/sh-pfc/pfc-sh7264.c') diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c index 8070765311db..e1c34e19222e 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c @@ -1716,6 +1716,9 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { }, { PINMUX_CFG_REG("PFCR3", 0xfffe38a8, 16, 4) { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, PF12MD_000, PF12MD_001, 0, PF12MD_011, PF12MD_100, PF12MD_101, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } @@ -1759,8 +1762,10 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { 0, 0, 0, 0, 0, 0, 0, 0, PF1MD_000, PF1MD_001, PF1MD_010, PF1MD_011, PF1MD_100, PF1MD_101, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 - } + 0, 0, 0, 0, 0, 0, 0, 0, + PF0MD_000, PF0MD_001, PF0MD_010, PF0MD_011, + PF0MD_100, PF0MD_101, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 } }, { PINMUX_CFG_REG("PFIOR0", 0xfffe38b2, 16, 1) { -- cgit v1.2.3 From 86ddd143d5281fb3ee8305a655a2394109eed3b9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Dec 2019 20:48:09 +0100 Subject: pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs [ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs. Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other. See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0). Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be Signed-off-by: Sasha Levin --- drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/pinctrl/sh-pfc/pfc-sh7264.c') diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c index e1c34e19222e..3ddb9565ed80 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c @@ -500,17 +500,15 @@ enum { SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, CRX0_MARK, CRX1_MARK, CTX0_MARK, CTX1_MARK, + CRX0_CRX1_MARK, CTX0_CTX1_MARK, PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK, PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK, PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK, PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK, IERXD_MARK, IETXD_MARK, - CRX0_CRX1_MARK, WDTOVF_MARK, - CRX0X1_MARK, - /* DMAC */ TEND0_MARK, DACK0_MARK, DREQ0_MARK, TEND1_MARK, DACK1_MARK, DREQ1_MARK, @@ -998,12 +996,12 @@ static const u16 pinmux_data[] = { PINMUX_DATA(PJ3_DATA, PJ3MD_00), PINMUX_DATA(CRX1_MARK, PJ3MD_01), - PINMUX_DATA(CRX0X1_MARK, PJ3MD_10), + PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10), PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(CTX1_MARK, PJ2MD_001), - PINMUX_DATA(CRX0_CRX1_MARK, PJ2MD_010), + PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010), PINMUX_DATA(CS2_MARK, PJ2MD_011), PINMUX_DATA(SCK0_MARK, PJ2MD_100), PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101), @@ -1248,6 +1246,7 @@ static const struct pinmux_func pinmux_func_gpios[] = { GPIO_FN(CTX1), GPIO_FN(CRX1), GPIO_FN(CTX0), + GPIO_FN(CTX0_CTX1), GPIO_FN(CRX0), GPIO_FN(CRX0_CRX1), -- cgit v1.2.3