From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/sbus/char/bpp.c | 1079 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1079 insertions(+) create mode 100644 drivers/sbus/char/bpp.c (limited to 'drivers/sbus/char/bpp.c') diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c new file mode 100644 index 000000000000..8f0f46907a81 --- /dev/null +++ b/drivers/sbus/char/bpp.c @@ -0,0 +1,1079 @@ +/* + * drivers/sbus/char/bpp.c + * + * Copyright (c) 1995 Picture Elements + * Stephen Williams (steve@icarus.com) + * Gus Baldauf (gbaldauf@ix.netcom.com) + * + * Linux/SPARC port by Peter Zaitcev. + * Integration into SPARC tree by Tom Dyas. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#if defined(__i386__) +# include +#endif + +#if defined(__sparc__) +# include +# include /* udelay() */ + +# include /* OpenProm Library */ +# include +#endif + +#include + +#define BPP_PROBE_CODE 0x55 +#define BPP_DELAY 100 + +static const unsigned BPP_MAJOR = LP_MAJOR; +static const char* dev_name = "bpp"; + +/* When switching from compatibility to a mode where I can read, try + the following mode first. */ + +/* const unsigned char DEFAULT_ECP = 0x10; */ +static const unsigned char DEFAULT_ECP = 0x30; +static const unsigned char DEFAULT_NIBBLE = 0x00; + +/* + * These are 1284 time constraints, in units of jiffies. + */ + +static const unsigned long TIME_PSetup = 1; +static const unsigned long TIME_PResponse = 6; +static const unsigned long TIME_IDLE_LIMIT = 2000; + +/* + * One instance per supported subdevice... + */ +# define BPP_NO 3 + +enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP }; + +struct inst { + unsigned present : 1; /* True if the hardware exists */ + unsigned enhanced : 1; /* True if the hardware in "enhanced" */ + unsigned opened : 1; /* True if the device is opened already */ + unsigned run_flag : 1; /* True if waiting for a repeate byte */ + + unsigned char direction; /* 0 --> out, 0x20 --> IN */ + unsigned char pp_state; /* State of host controlled pins. */ + enum IEEE_Mode mode; + + unsigned char run_length; + unsigned char repeat_byte; + + /* These members manage timeouts for programmed delays */ + wait_queue_head_t wait_queue; + struct timer_list timer_list; +}; + +static struct inst instances[BPP_NO]; + +#if defined(__i386__) + +static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc }; + +/* + * These are for data access. + * Control lines accesses are hidden in set_bits() and get_bits(). + * The exception is the probe procedure, which is system-dependent. + */ +#define bpp_outb_p(data, base) outb_p((data), (base)) +#define bpp_inb(base) inb(base) +#define bpp_inb_p(base) inb_p(base) + +/* + * This method takes the pin values mask and sets the hardware pins to + * the requested value: 1 == high voltage, 0 == low voltage. This + * burries the annoying PC bit inversion and preserves the direction + * flag. + */ +static void set_pins(unsigned short pins, unsigned minor) +{ + unsigned char bits = instances[minor].direction; /* == 0x20 */ + + if (! (pins & BPP_PP_nStrobe)) bits |= 1; + if (! (pins & BPP_PP_nAutoFd)) bits |= 2; + if ( pins & BPP_PP_nInit) bits |= 4; + if (! (pins & BPP_PP_nSelectIn)) bits |= 8; + + instances[minor].pp_state = bits; + + outb_p(bits, base_addrs[minor]+2); +} + +static unsigned short get_pins(unsigned minor) +{ + unsigned short bits = 0; + + unsigned value = instances[minor].pp_state; + if (! (value & 0x01)) bits |= BPP_PP_nStrobe; + if (! (value & 0x02)) bits |= BPP_PP_nAutoFd; + if (value & 0x04) bits |= BPP_PP_nInit; + if (! (value & 0x08)) bits |= BPP_PP_nSelectIn; + + value = inb_p(base_addrs[minor]+1); + if (value & 0x08) bits |= BPP_GP_nFault; + if (value & 0x10) bits |= BPP_GP_Select; + if (value & 0x20) bits |= BPP_GP_PError; + if (value & 0x40) bits |= BPP_GP_nAck; + if (! (value & 0x80)) bits |= BPP_GP_Busy; + + return bits; +} + +#endif /* __i386__ */ + +#if defined(__sparc__) + +/* + * Register block + */ + /* DMA registers */ +#define BPP_CSR 0x00 +#define BPP_ADDR 0x04 +#define BPP_BCNT 0x08 +#define BPP_TST_CSR 0x0C + /* Parallel Port registers */ +#define BPP_HCR 0x10 +#define BPP_OCR 0x12 +#define BPP_DR 0x14 +#define BPP_TCR 0x15 +#define BPP_OR 0x16 +#define BPP_IR 0x17 +#define BPP_ICR 0x18 +#define BPP_SIZE 0x1A + +/* BPP_CSR. Bits of type RW1 are cleared with writting '1'. */ +#define P_DEV_ID_MASK 0xf0000000 /* R */ +#define P_DEV_ID_ZEBRA 0x40000000 +#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */ +#define P_NA_LOADED 0x08000000 /* R NA wirtten but was not used */ +#define P_A_LOADED 0x04000000 /* R */ +#define P_DMA_ON 0x02000000 /* R DMA is not disabled */ +#define P_EN_NEXT 0x01000000 /* RW */ +#define P_TCI_DIS 0x00800000 /* RW TCI forbidden from interrupts */ +#define P_DIAG 0x00100000 /* RW Disables draining and resetting + of P-FIFO on loading of P_ADDR*/ +#define P_BURST_SIZE 0x000c0000 /* RW SBus burst size */ +#define P_BURST_8 0x00000000 +#define P_BURST_4 0x00040000 +#define P_BURST_1 0x00080000 /* "No burst" write */ +#define P_TC 0x00004000 /* RW1 Term Count, can be cleared when + P_EN_NEXT=1 */ +#define P_EN_CNT 0x00002000 /* RW */ +#define P_EN_DMA 0x00000200 /* RW */ +#define P_WRITE 0x00000100 /* R DMA dir, 1=to ram, 0=to port */ +#define P_RESET 0x00000080 /* RW */ +#define P_SLAVE_ERR 0x00000040 /* RW1 Access size error */ +#define P_INVALIDATE 0x00000020 /* W Drop P-FIFO */ +#define P_INT_EN 0x00000010 /* RW OK to P_INT_PEND||P_ERR_PEND */ +#define P_DRAINING 0x0000000c /* R P-FIFO is draining to memory */ +#define P_ERR_PEND 0x00000002 /* R */ +#define P_INT_PEND 0x00000001 /* R */ + +/* BPP_HCR. Time is in increments of SBus clock. */ +#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ +#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ +#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ + +/* BPP_OCR. */ +#define P_OCR_MEM_CLR 0x8000 +#define P_OCR_DATA_SRC 0x4000 /* ) */ +#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ +#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ +#define P_OCR_ACK_DSEL 0x0800 /* ) */ +#define P_OCR_EN_DIAG 0x0400 +#define P_OCR_BUSY_OP 0x0200 /* Busy operation */ +#define P_OCR_ACK_OP 0x0100 /* Ack operation */ +#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ +#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ +#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ +#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ + +/* BPP_TCR */ +#define P_TCR_DIR 0x08 +#define P_TCR_BUSY 0x04 +#define P_TCR_ACK 0x02 +#define P_TCR_DS 0x01 /* Strobe */ + +/* BPP_OR */ +#define P_OR_V3 0x20 /* ) */ +#define P_OR_V2 0x10 /* ) on Zebra only */ +#define P_OR_V1 0x08 /* ) */ +#define P_OR_INIT 0x04 +#define P_OR_AFXN 0x02 /* Auto Feed */ +#define P_OR_SLCT_IN 0x01 + +/* BPP_IR */ +#define P_IR_PE 0x04 +#define P_IR_SLCT 0x02 +#define P_IR_ERR 0x01 + +/* BPP_ICR */ +#define P_DS_IRQ 0x8000 /* RW1 */ +#define P_ACK_IRQ 0x4000 /* RW1 */ +#define P_BUSY_IRQ 0x2000 /* RW1 */ +#define P_PE_IRQ 0x1000 /* RW1 */ +#define P_SLCT_IRQ 0x0800 /* RW1 */ +#define P_ERR_IRQ 0x0400 /* RW1 */ +#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ +#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ +#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ +#define P_BUSY_IRQ_EN 0x0040 /* RW */ +#define P_PE_IRP 0x0020 /* RW 1= rising edge */ +#define P_PE_IRQ_EN 0x0010 /* RW */ +#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ +#define P_SLCT_IRQ_EN 0x0004 /* RW */ +#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ +#define P_ERR_IRQ_EN 0x0001 /* RW */ + +static void __iomem *base_addrs[BPP_NO]; + +#define bpp_outb_p(data, base) sbus_writeb(data, (base) + BPP_DR) +#define bpp_inb_p(base) sbus_readb((base) + BPP_DR) +#define bpp_inb(base) sbus_readb((base) + BPP_DR) + +static void set_pins(unsigned short pins, unsigned minor) +{ + void __iomem *base = base_addrs[minor]; + unsigned char bits_tcr = 0, bits_or = 0; + + if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR; + if ( pins & BPP_PP_nStrobe) bits_tcr |= P_TCR_DS; + + if ( pins & BPP_PP_nAutoFd) bits_or |= P_OR_AFXN; + if (! (pins & BPP_PP_nInit)) bits_or |= P_OR_INIT; + if (! (pins & BPP_PP_nSelectIn)) bits_or |= P_OR_SLCT_IN; + + sbus_writeb(bits_or, base + BPP_OR); + sbus_writeb(bits_tcr, base + BPP_TCR); +} + +/* + * i386 people read output pins from a software image. + * We may get them back from hardware. + * Again, inversion of pins must he buried here. + */ +static unsigned short get_pins(unsigned minor) +{ + void __iomem *base = base_addrs[minor]; + unsigned short bits = 0; + unsigned value_tcr = sbus_readb(base + BPP_TCR); + unsigned value_ir = sbus_readb(base + BPP_IR); + unsigned value_or = sbus_readb(base + BPP_OR); + + if (value_tcr & P_TCR_DS) bits |= BPP_PP_nStrobe; + if (value_or & P_OR_AFXN) bits |= BPP_PP_nAutoFd; + if (! (value_or & P_OR_INIT)) bits |= BPP_PP_nInit; + if (! (value_or & P_OR_SLCT_IN)) bits |= BPP_PP_nSelectIn; + + if (value_ir & P_IR_ERR) bits |= BPP_GP_nFault; + if (! (value_ir & P_IR_SLCT)) bits |= BPP_GP_Select; + if (! (value_ir & P_IR_PE)) bits |= BPP_GP_PError; + if (! (value_tcr & P_TCR_ACK)) bits |= BPP_GP_nAck; + if (value_tcr & P_TCR_BUSY) bits |= BPP_GP_Busy; + + return bits; +} + +#endif /* __sparc__ */ + +static void bpp_wake_up(unsigned long val) +{ wake_up(&instances[val].wait_queue); } + +static void snooze(unsigned long snooze_time, unsigned minor) +{ + init_timer(&instances[minor].timer_list); + instances[minor].timer_list.expires = jiffies + snooze_time + 1; + instances[minor].timer_list.data = minor; + add_timer(&instances[minor].timer_list); + sleep_on (&instances[minor].wait_queue); +} + +static int wait_for(unsigned short set, unsigned short clr, + unsigned long delay, unsigned minor) +{ + unsigned short pins = get_pins(minor); + + unsigned long extime = 0; + + /* + * Try a real fast scan for the first jiffy, in case the device + * responds real good. The first while loop guesses an expire + * time accounting for possible wraparound of jiffies. + */ + while (time_after_eq(jiffies, extime)) extime = jiffies + 1; + while ( (time_before(jiffies, extime)) + && (((pins & set) != set) || ((pins & clr) != 0)) ) { + pins = get_pins(minor); + } + + delay -= 1; + + /* + * If my delay expired or the pins are still not where I want + * them, then resort to using the timer and greatly reduce my + * sample rate. If the peripheral is going to be slow, this will + * give the CPU up to some more worthy process. + */ + while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) { + + snooze(1, minor); + pins = get_pins(minor); + delay -= 1; + } + + if (delay == 0) return -1; + else return pins; +} + +/* + * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An + * errno means something broke, and I do not yet know how to fix it. + */ +static int negotiate(unsigned char mode, unsigned minor) +{ + int rc; + unsigned short pins = get_pins(minor); + if (pins & BPP_PP_nSelectIn) return -EIO; + + + /* Event 0: Write the mode to the data lines */ + bpp_outb_p(mode, base_addrs[minor]); + + snooze(TIME_PSetup, minor); + + /* Event 1: Strobe the mode code into the peripheral */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor); + + /* Wait for Event 2: Peripheral responds as a 1284 device. */ + rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault, + BPP_GP_nAck, + TIME_PResponse, + minor); + + if (rc == -1) return -ETIMEDOUT; + + /* Event 3: latch extensibility request */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor); + + /* ... quick nap while peripheral ponders the byte i'm sending...*/ + snooze(1, minor); + + /* Event 4: restore strobe, to ACK peripheral's response. */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); + + /* Wait for Event 6: Peripheral latches response bits */ + rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor); + if (rc == -1) return -EIO; + + /* A 1284 device cannot refuse nibble mode */ + if (mode == DEFAULT_NIBBLE) return 0; + + if (pins & BPP_GP_Select) return 0; + + return -EPROTONOSUPPORT; +} + +static int terminate(unsigned minor) +{ + int rc; + + /* Event 22: Request termination of 1284 mode */ + set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); + + /* Wait for Events 23 and 24: ACK termination request. */ + rc = wait_for(BPP_GP_Busy|BPP_GP_nFault, + BPP_GP_nAck, + TIME_PSetup+TIME_PResponse, + minor); + + instances[minor].direction = 0; + instances[minor].mode = COMPATIBILITY; + + if (rc == -1) { + return -EIO; + } + + /* Event 25: Handshake by lowering nAutoFd */ + set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor); + + /* Event 26: Peripheral wiggles lines... */ + + /* Event 27: Peripheral sets nAck HIGH to ack handshake */ + rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); + if (rc == -1) { + set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); + return -EIO; + } + + /* Event 28: Finish phase by raising nAutoFd */ + set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); + + return 0; +} + +static DEFINE_SPINLOCK(bpp_open_lock); + +/* + * Allow only one process to open the device at a time. + */ +static int bpp_open(struct inode *inode, struct file *f) +{ + unsigned minor = iminor(inode); + int ret; + + spin_lock(&bpp_open_lock); + ret = 0; + if (minor >= BPP_NO) { + ret = -ENODEV; + } else { + if (! instances[minor].present) { + ret = -ENODEV; + } else { + if (instances[minor].opened) + ret = -EBUSY; + else + instances[minor].opened = 1; + } + } + spin_unlock(&bpp_open_lock); + + return ret; +} + +/* + * When the process closes the device, this method is called to clean + * up and reset the hardware. Always leave the device in compatibility + * mode as this is a reasonable place to clean up from messes made by + * ioctls, or other mayhem. + */ +static int bpp_release(struct inode *inode, struct file *f) +{ + unsigned minor = iminor(inode); + + spin_lock(&bpp_open_lock); + instances[minor].opened = 0; + + if (instances[minor].mode != COMPATIBILITY) + terminate(minor); + + spin_unlock(&bpp_open_lock); + + return 0; +} + +static long read_nibble(unsigned minor, char __user *c, unsigned long cnt) +{ + unsigned long remaining = cnt; + long rc; + + while (remaining > 0) { + unsigned char byte = 0; + int pins; + + /* Event 7: request nibble */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor); + + /* Wait for event 9: Peripher strobes first nibble */ + pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor); + if (pins == -1) return -ETIMEDOUT; + + /* Event 10: I handshake nibble */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor); + if (pins & BPP_GP_nFault) byte |= 0x01; + if (pins & BPP_GP_Select) byte |= 0x02; + if (pins & BPP_GP_PError) byte |= 0x04; + if (pins & BPP_GP_Busy) byte |= 0x08; + + /* Wait for event 11: Peripheral handshakes nibble */ + rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); + + /* Event 7: request nibble */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor); + + /* Wait for event 9: Peripher strobes first nibble */ + pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor); + if (rc == -1) return -ETIMEDOUT; + + /* Event 10: I handshake nibble */ + set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor); + if (pins & BPP_GP_nFault) byte |= 0x10; + if (pins & BPP_GP_Select) byte |= 0x20; + if (pins & BPP_GP_PError) byte |= 0x40; + if (pins & BPP_GP_Busy) byte |= 0x80; + + if (put_user(byte, c)) + return -EFAULT; + c += 1; + remaining -= 1; + + /* Wait for event 11: Peripheral handshakes nibble */ + rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); + if (rc == -1) return -EIO; + } + + return cnt - remaining; +} + +static long read_ecp(unsigned minor, char __user *c, unsigned long cnt) +{ + unsigned long remaining; + long rc; + + /* Turn ECP mode from forward to reverse if needed. */ + if (! instances[minor].direction) { + unsigned short pins = get_pins(minor); + + /* Event 38: Turn the bus around */ + instances[minor].direction = 0x20; + pins &= ~BPP_PP_nAutoFd; + set_pins(pins, minor); + + /* Event 39: Set pins for reverse mode. */ + snooze(TIME_PSetup, minor); + set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor); + + /* Wait for event 40: Peripheral ready to be strobed */ + rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor); + if (rc == -1) return -ETIMEDOUT; + } + + remaining = cnt; + + while (remaining > 0) { + + /* If there is a run length for a repeated byte, repeat */ + /* that byte a few times. */ + if (instances[minor].run_length && !instances[minor].run_flag) { + + char buffer[128]; + unsigned idx; + unsigned repeat = remaining < instances[minor].run_length + ? remaining + : instances[minor].run_length; + + for (idx = 0 ; idx < repeat ; idx += 1) + buffer[idx] = instances[minor].repeat_byte; + + if (copy_to_user(c, buffer, repeat)) + return -EFAULT; + remaining -= repeat; + c += repeat; + instances[minor].run_length -= repeat; + } + + if (remaining == 0) break; + + + /* Wait for Event 43: Data active on the bus. */ + rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor); + if (rc == -1) break; + + if (rc & BPP_GP_Busy) { + /* OK, this is data. read it in. */ + unsigned char byte = bpp_inb(base_addrs[minor]); + if (put_user(byte, c)) + return -EFAULT; + c += 1; + remaining -= 1; + + if (instances[minor].run_flag) { + instances[minor].repeat_byte = byte; + instances[minor].run_flag = 0; + } + + } else { + unsigned char byte = bpp_inb(base_addrs[minor]); + if (byte & 0x80) { + printk("bpp%d: " + "Ignoring ECP channel %u from device.\n", + minor, byte & 0x7f); + } else { + instances[minor].run_length = byte; + instances[minor].run_flag = 1; + } + } + + /* Event 44: I got it. */ + set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor); + + /* Wait for event 45: peripheral handshake */ + rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); + if (rc == -1) return -ETIMEDOUT; + + /* Event 46: Finish handshake */ + set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor); + + } + + + return cnt - remaining; +} + +static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos) +{ + long rc; + unsigned minor = iminor(f->f_dentry->d_inode); + if (minor >= BPP_NO) return -ENODEV; + if (!instances[minor].present) return -ENODEV; + + switch (instances[minor].mode) { + + default: + if (instances[minor].mode != COMPATIBILITY) + terminate(minor); + + if (instances[minor].enhanced) { + /* For now, do all reads with ECP-RLE mode */ + unsigned short pins; + + rc = negotiate(DEFAULT_ECP, minor); + if (rc < 0) break; + + instances[minor].mode = ECP_RLE; + + /* Event 30: set nAutoFd low to setup for ECP mode */ + pins = get_pins(minor); + pins &= ~BPP_PP_nAutoFd; + set_pins(pins, minor); + + /* Wait for Event 31: peripheral ready */ + rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor); + if (rc == -1) return -ETIMEDOUT; + + rc = read_ecp(minor, c, cnt); + + } else { + rc = negotiate(DEFAULT_NIBBLE, minor); + if (rc < 0) break; + + instances[minor].mode = NIBBLE; + + rc = read_nibble(minor, c, cnt); + } + break; + + case NIBBLE: + rc = read_nibble(minor, c, cnt); + break; + + case ECP: + case ECP_RLE: + rc = read_ecp(minor, c, cnt); + break; + + } + + + return rc; +} + +/* + * Compatibility mode handshaking is a matter of writing data, + * strobing it, and waiting for the printer to stop being busy. + */ +static long write_compat(unsigned minor, const char __user *c, unsigned long cnt) +{ + long rc; + unsigned short pins = get_pins(minor); + + unsigned long remaining = cnt; + + + while (remaining > 0) { + unsigned char byte; + + if (get_user(byte, c)) + return -EFAULT; + c += 1; + + rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor); + if (rc == -1) return -ETIMEDOUT; + + bpp_outb_p(byte, base_addrs[minor]); + remaining -= 1; + /* snooze(1, minor); */ + + pins &= ~BPP_PP_nStrobe; + set_pins(pins, minor); + + rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor); + + pins |= BPP_PP_nStrobe; + set_pins(pins, minor); + } + + return cnt - remaining; +} + +/* + * Write data using ECP mode. Watch out that the port may be set up + * for reading. If so, turn the port around. + */ +static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt) +{ + unsigned short pins = get_pins(minor); + unsigned long remaining = cnt; + + if (instances[minor].direction) { + int rc; + + /* Event 47 Request bus be turned around */ + pins |= BPP_PP_nInit; + set_pins(pins, minor); + + /* Wait for Event 49: Peripheral relinquished bus */ + rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor); + + pins |= BPP_PP_nAutoFd; + instances[minor].direction = 0; + set_pins(pins, minor); + } + + while (remaining > 0) { + unsigned char byte; + int rc; + + if (get_user(byte, c)) + return -EFAULT; + + rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor); + if (rc == -1) return -ETIMEDOUT; + + c += 1; + + bpp_outb_p(byte, base_addrs[minor]); + + pins &= ~BPP_PP_nStrobe; + set_pins(pins, minor); + + pins |= BPP_PP_nStrobe; + rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor); + if (rc == -1) return -EIO; + + set_pins(pins, minor); + } + + return cnt - remaining; +} + +/* + * Write to the peripheral. Be sensitive of the current mode. If I'm + * in a mode that can be turned around (ECP) then just do + * that. Otherwise, terminate and do my writing in compat mode. This + * is the safest course as any device can handle it. + */ +static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos) +{ + long errno = 0; + unsigned minor = iminor(f->f_dentry->d_inode); + if (minor >= BPP_NO) return -ENODEV; + if (!instances[minor].present) return -ENODEV; + + switch (instances[minor].mode) { + + case ECP: + case ECP_RLE: + errno = write_ecp(minor, c, cnt); + break; + case COMPATIBILITY: + errno = write_compat(minor, c, cnt); + break; + default: + terminate(minor); + errno = write_compat(minor, c, cnt); + } + + return errno; +} + +static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd, + unsigned long arg) +{ + int errno = 0; + + unsigned minor = iminor(inode); + if (minor >= BPP_NO) return -ENODEV; + if (!instances[minor].present) return -ENODEV; + + + switch (cmd) { + + case BPP_PUT_PINS: + set_pins(arg, minor); + break; + + case BPP_GET_PINS: + errno = get_pins(minor); + break; + + case BPP_PUT_DATA: + bpp_outb_p(arg, base_addrs[minor]); + break; + + case BPP_GET_DATA: + errno = bpp_inb_p(base_addrs[minor]); + break; + + case BPP_SET_INPUT: + if (arg) + if (instances[minor].enhanced) { + unsigned short bits = get_pins(minor); + instances[minor].direction = 0x20; + set_pins(bits, minor); + } else { + errno = -ENOTTY; + } + else { + unsigned short bits = get_pins(minor); + instances[minor].direction = 0x00; + set_pins(bits, minor); + } + break; + + default: + errno = -EINVAL; + } + + return errno; +} + +static struct file_operations bpp_fops = { + .owner = THIS_MODULE, + .read = bpp_read, + .write = bpp_write, + .ioctl = bpp_ioctl, + .open = bpp_open, + .release = bpp_release, +}; + +#if defined(__i386__) + +#define collectLptPorts() {} + +static void probeLptPort(unsigned idx) +{ + unsigned int testvalue; + const unsigned short lpAddr = base_addrs[idx]; + + instances[idx].present = 0; + instances[idx].enhanced = 0; + instances[idx].direction = 0; + instances[idx].mode = COMPATIBILITY; + instances[idx].wait_queue = 0; + instances[idx].run_length = 0; + instances[idx].run_flag = 0; + init_timer(&instances[idx].timer_list); + instances[idx].timer_list.function = bpp_wake_up; + if (!request_region(lpAddr,3, dev_name)) return; + + /* + * First, make sure the instance exists. Do this by writing to + * the data latch and reading the value back. If the port *is* + * present, test to see if it supports extended-mode + * operation. This will be required for IEEE1284 reverse + * transfers. + */ + + outb_p(BPP_PROBE_CODE, lpAddr); + for (testvalue=0; testvalueresource[0], 0, BPP_SIZE, "bpp"); +} + +static int collectLptPorts(void) +{ + struct sbus_bus *bus; + struct sbus_dev *dev; + int count; + + count = 0; + for_all_sbusdev(dev, bus) { + if (strcmp(dev->prom_name, "SUNW,bpp") == 0) { + if (count >= BPP_NO) { + printk(KERN_NOTICE + "bpp: More than %d bpp ports," + " rest is ignored\n", BPP_NO); + return count; + } + base_addrs[count] = map_bpp(dev, count); + count++; + } + } + return count; +} + +static void probeLptPort(unsigned idx) +{ + void __iomem *rp = base_addrs[idx]; + __u32 csr; + char *brand; + + instances[idx].present = 0; + instances[idx].enhanced = 0; + instances[idx].direction = 0; + instances[idx].mode = COMPATIBILITY; + init_waitqueue_head(&instances[idx].wait_queue); + instances[idx].run_length = 0; + instances[idx].run_flag = 0; + init_timer(&instances[idx].timer_list); + instances[idx].timer_list.function = bpp_wake_up; + + if (!rp) return; + + instances[idx].present = 1; + instances[idx].enhanced = 1; /* Sure */ + + csr = sbus_readl(rp + BPP_CSR); + if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) { + udelay(20); + csr = sbus_readl(rp + BPP_CSR); + if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) { + printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr); + } + } + printk("bpp%d: reset with 0x%08x ..", idx, csr); + sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR); + udelay(500); + sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR); + csr = sbus_readl(rp + BPP_CSR); + printk(" done with csr=0x%08x ocr=0x%04x\n", + csr, sbus_readw(rp + BPP_OCR)); + + switch (csr & P_DEV_ID_MASK) { + case P_DEV_ID_ZEBRA: + brand = "Zebra"; + break; + case P_DEV_ID_L64854: + brand = "DMA2"; + break; + default: + brand = "Unknown"; + } + printk("bpp%d: %s at %p\n", idx, brand, rp); + + /* + * Leave the port in compat idle mode. + */ + set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx); + + return; +} + +static inline void freeLptPort(int idx) +{ + sbus_iounmap(base_addrs[idx], BPP_SIZE); +} + +#endif + +static int __init bpp_init(void) +{ + int rc; + unsigned idx; + + rc = collectLptPorts(); + if (rc == 0) + return -ENODEV; + + rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops); + if (rc < 0) + return rc; + + for (idx = 0; idx < BPP_NO; idx++) { + instances[idx].opened = 0; + probeLptPort(idx); + } + devfs_mk_dir("bpp"); + for (idx = 0; idx < BPP_NO; idx++) { + devfs_mk_cdev(MKDEV(BPP_MAJOR, idx), + S_IFCHR | S_IRUSR | S_IWUSR, "bpp/%d", idx); + } + + return 0; +} + +static void __exit bpp_cleanup(void) +{ + unsigned idx; + + for (idx = 0; idx < BPP_NO; idx++) + devfs_remove("bpp/%d", idx); + devfs_remove("bpp"); + unregister_chrdev(BPP_MAJOR, dev_name); + + for (idx = 0; idx < BPP_NO; idx++) { + if (instances[idx].present) + freeLptPort(idx); + } +} + +module_init(bpp_init); +module_exit(bpp_cleanup); + +MODULE_LICENSE("GPL"); + -- cgit v1.2.3