From df4f4dd429870f435f8d5d9d561db029a29f063b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 16 Jul 2008 21:53:50 +0100 Subject: serial: use tty_port Switch the serial_core based drivers to use the new tty_port structure. We can't quite use all of it yet because of the dynamically allocated extras in the serial_core layer. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/serial_core.c | 80 +++++++++++++++++++++++--------------------- 1 file changed, 42 insertions(+), 38 deletions(-) (limited to 'drivers/serial/serial_core.c') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 9884bc9eecb1..0bce1fe2c62a 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -50,7 +50,7 @@ static struct lock_class_key port_lock_key; #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) -#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0)) +#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->port.blocked_open : 0)) #ifdef CONFIG_SERIAL_CORE_CONSOLE #define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) @@ -113,7 +113,7 @@ static void uart_start(struct tty_struct *tty) static void uart_tasklet_action(unsigned long data) { struct uart_state *state = (struct uart_state *)data; - tty_wakeup(state->info->tty); + tty_wakeup(state->info->port.tty); } static inline void @@ -135,7 +135,7 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) /* * Startup the port. This will be called once per open. All calls - * will be serialised by the per-port semaphore. + * will be serialised by the per-port mutex. */ static int uart_startup(struct uart_state *state, int init_hw) { @@ -152,7 +152,7 @@ static int uart_startup(struct uart_state *state, int init_hw) * once we have successfully opened the port. Also set * up the tty->alt_speed kludge */ - set_bit(TTY_IO_ERROR, &info->tty->flags); + set_bit(TTY_IO_ERROR, &info->port.tty->flags); if (port->type == PORT_UNKNOWN) return 0; @@ -162,6 +162,7 @@ static int uart_startup(struct uart_state *state, int init_hw) * buffer. */ if (!info->xmit.buf) { + /* This is protected by the per port mutex */ page = get_zeroed_page(GFP_KERNEL); if (!page) return -ENOMEM; @@ -182,20 +183,20 @@ static int uart_startup(struct uart_state *state, int init_hw) * Setup the RTS and DTR signals once the * port is open and ready to respond. */ - if (info->tty->termios->c_cflag & CBAUD) + if (info->port.tty->termios->c_cflag & CBAUD) uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); } if (info->flags & UIF_CTS_FLOW) { spin_lock_irq(&port->lock); if (!(port->ops->get_mctrl(port) & TIOCM_CTS)) - info->tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; spin_unlock_irq(&port->lock); } info->flags |= UIF_INITIALIZED; - clear_bit(TTY_IO_ERROR, &info->tty->flags); + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); } if (retval && capable(CAP_SYS_ADMIN)) @@ -217,8 +218,8 @@ static void uart_shutdown(struct uart_state *state) /* * Set the TTY IO error marker */ - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); if (info->flags & UIF_INITIALIZED) { info->flags &= ~UIF_INITIALIZED; @@ -226,7 +227,7 @@ static void uart_shutdown(struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); /* @@ -426,7 +427,7 @@ EXPORT_SYMBOL(uart_get_divisor); static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios) { - struct tty_struct *tty = state->info->tty; + struct tty_struct *tty = state->info->port.tty; struct uart_port *port = state->port; struct ktermios *termios; @@ -836,8 +837,8 @@ static int uart_set_info(struct uart_state *state, state->closing_wait = closing_wait; if (new_serial.xmit_fifo_size) port->fifosize = new_serial.xmit_fifo_size; - if (state->info->tty) - state->info->tty->low_latency = + if (state->info->port.tty) + state->info->port.tty->low_latency = (port->flags & UPF_LOW_LATENCY) ? 1 : 0; check_and_exit: @@ -857,7 +858,7 @@ static int uart_set_info(struct uart_state *state, printk(KERN_NOTICE "%s sets custom speed on %s. This " "is deprecated.\n", current->comm, - tty_name(state->info->tty, buf)); + tty_name(state->info->port.tty, buf)); } uart_change_speed(state, NULL); } @@ -889,7 +890,7 @@ static int uart_get_lsr_info(struct uart_state *state, */ if (port->x_char || ((uart_circ_chars_pending(&state->info->xmit) > 0) && - !state->info->tty->stopped && !state->info->tty->hw_stopped)) + !state->info->port.tty->stopped && !state->info->port.tty->hw_stopped)) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -1239,7 +1240,7 @@ static void uart_set_termios(struct tty_struct *tty, */ if (!(old_termios->c_cflag & CLOCAL) && (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&state->info->open_wait); + wake_up_interruptible(&state->info->port.open_wait); #endif } @@ -1320,9 +1321,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); tty->closing = 0; - state->info->tty = NULL; + state->info->port.tty = NULL; - if (state->info->blocked_open) { + if (state->info->port.blocked_open) { if (state->close_delay) msleep_interruptible(state->close_delay); } else if (!uart_console(port)) { @@ -1333,7 +1334,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp) * Wake up anyone trying to open this port. */ state->info->flags &= ~UIF_NORMAL_ACTIVE; - wake_up_interruptible(&state->info->open_wait); + wake_up_interruptible(&state->info->port.open_wait); done: mutex_unlock(&state->mutex); @@ -1417,8 +1418,8 @@ static void uart_hangup(struct tty_struct *tty) uart_shutdown(state); state->count = 0; state->info->flags &= ~UIF_NORMAL_ACTIVE; - state->info->tty = NULL; - wake_up_interruptible(&state->info->open_wait); + state->info->port.tty = NULL; + wake_up_interruptible(&state->info->port.open_wait); wake_up_interruptible(&state->info->delta_msr_wait); } mutex_unlock(&state->mutex); @@ -1432,7 +1433,7 @@ static void uart_hangup(struct tty_struct *tty) */ static void uart_update_termios(struct uart_state *state) { - struct tty_struct *tty = state->info->tty; + struct tty_struct *tty = state->info->port.tty; struct uart_port *port = state->port; if (uart_console(port) && port->cons->cflag) { @@ -1471,17 +1472,17 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) struct uart_port *port = state->port; unsigned int mctrl; - info->blocked_open++; + info->port.blocked_open++; state->count--; - add_wait_queue(&info->open_wait, &wait); + add_wait_queue(&info->port.open_wait, &wait); while (1) { set_current_state(TASK_INTERRUPTIBLE); /* * If we have been hung up, tell userspace/restart open. */ - if (tty_hung_up_p(filp) || info->tty == NULL) + if (tty_hung_up_p(filp) || info->port.tty == NULL) break; /* @@ -1500,8 +1501,8 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * have set TTY_IO_ERROR for a non-existant port. */ if ((filp->f_flags & O_NONBLOCK) || - (info->tty->termios->c_cflag & CLOCAL) || - (info->tty->flags & (1 << TTY_IO_ERROR))) + (info->port.tty->termios->c_cflag & CLOCAL) || + (info->port.tty->flags & (1 << TTY_IO_ERROR))) break; /* @@ -1509,7 +1510,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) * not set RTS here - we want to make sure we catch * the data from the modem. */ - if (info->tty->termios->c_cflag & CBAUD) + if (info->port.tty->termios->c_cflag & CBAUD) uart_set_mctrl(port, TIOCM_DTR); /* @@ -1531,15 +1532,15 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) break; } set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + remove_wait_queue(&info->port.open_wait, &wait); state->count++; - info->blocked_open--; + info->port.blocked_open--; if (signal_pending(current)) return -ERESTARTSYS; - if (!info->tty || tty_hung_up_p(filp)) + if (!info->port.tty || tty_hung_up_p(filp)) return -EAGAIN; return 0; @@ -1562,10 +1563,13 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line) goto err_unlock; } + /* BKL: RACE HERE - LEAK */ + /* We should move this into the uart_state structure and kill off + this whole complexity */ if (!state->info) { state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL); if (state->info) { - init_waitqueue_head(&state->info->open_wait); + init_waitqueue_head(&state->info->port.open_wait); init_waitqueue_head(&state->info->delta_msr_wait); /* @@ -1622,7 +1626,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) * be re-entered while allocating the info structure, or while we * request any IRQs that the driver may need. This also has the nice * side-effect that it delays the action of uart_hangup, so we can - * guarantee that info->tty will always contain something reasonable. + * guarantee that info->port.tty will always contain something reasonable. */ state = uart_get(drv, line); if (IS_ERR(state)) { @@ -1638,7 +1642,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) tty->driver_data = state; tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0; tty->alt_speed = 0; - state->info->tty = tty; + state->info->port.tty = tty; /* * If the port is in the middle of closing, bail out now. @@ -2101,8 +2105,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) /* * If that's unset, use the tty termios setting. */ - if (state->info && state->info->tty && termios.c_cflag == 0) - termios = *state->info->tty->termios; + if (state->info && state->info->port.tty && termios.c_cflag == 0) + termios = *state->info->port.tty->termios; uart_change_pm(state, 0); port->ops->set_termios(port, &termios, NULL); @@ -2521,8 +2525,8 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) tty_unregister_device(drv->tty_driver, port->line); info = state->info; - if (info && info->tty) - tty_vhangup(info->tty); + if (info && info->port.tty) + tty_vhangup(info->port.tty); /* * All users of this port should now be disconnected from -- cgit v1.2.3