From 45fae7def636a2b400595d56c67cfed60051b773 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 28 Jun 2011 14:49:16 +0200 Subject: spi: remove obsolete spi-s3c24xx-gpio driver It was equivalent to spi-gpio, and there's no longer any in-tree users of it, so get rid of it. Signed-off-by: Peter Korsgaard Acked-by: Ben Dooks Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 10 --- drivers/spi/Makefile | 1 - drivers/spi/spi-s3c24xx-gpio.c | 200 ----------------------------------------- 3 files changed, 211 deletions(-) delete mode 100644 drivers/spi/spi-s3c24xx-gpio.c (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index c013481fa186..9aafa98f3b49 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -313,16 +313,6 @@ config SPI_S3C24XX_FIQ no free DMA channels, or when doing transfers that required both TX and RX data paths. -config SPI_S3C24XX_GPIO - tristate "Samsung S3C24XX series SPI by GPIO" - depends on ARCH_S3C2410 && EXPERIMENTAL - select SPI_BITBANG - help - SPI driver for Samsung S3C24XX series ARM SoCs using - GPIO lines to provide the SPI bus. This can be used where - the inbuilt hardware cannot provide the transfer mode, or - where the board is using non hardware connected pins. - config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" depends on (ARCH_S3C64XX || ARCH_S5P64X0) diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b60b04befee0..61c3261c388c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o -obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi-s3c24xx-gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o diff --git a/drivers/spi/spi-s3c24xx-gpio.c b/drivers/spi/spi-s3c24xx-gpio.c deleted file mode 100644 index 2d3c085930fe..000000000000 --- a/drivers/spi/spi-s3c24xx-gpio.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * - * S3C24XX GPIO based SPI driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -struct s3c2410_spigpio { - struct spi_bitbang bitbang; - - struct s3c2410_spigpio_info *info; - struct platform_device *dev; -}; - -static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static inline void setsck(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0); -} - -static inline void setmosi(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0); -} - -static inline u32 getmiso(struct spi_device *dev) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0; -} - -#define spidelay(x) ndelay(x) - -#include "spi-bitbang-txrx.h" - - -static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -} - - -static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - - if (sg->info && sg->info->chip_select) - (sg->info->chip_select)(sg->info, value); -} - -static int s3c2410_spigpio_probe(struct platform_device *dev) -{ - struct s3c2410_spigpio_info *info; - struct spi_master *master; - struct s3c2410_spigpio *sp; - int ret; - - master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); - if (master == NULL) { - dev_err(&dev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err; - } - - sp = spi_master_get_devdata(master); - - platform_set_drvdata(dev, sp); - - /* copy in the plkatform data */ - info = sp->info = dev->dev.platform_data; - - /* setup spi bitbang adaptor */ - sp->bitbang.master = spi_master_get(master); - sp->bitbang.master->bus_num = info->bus_num; - sp->bitbang.master->num_chipselect = info->num_chipselect; - sp->bitbang.chipselect = s3c2410_spigpio_chipselect; - - sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; - sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1; - sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2; - sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3; - - /* set state of spi pins, always assume that the clock is - * available, but do check the MOSI and MISO. */ - s3c2410_gpio_setpin(info->pin_clk, 0); - s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT); - - if (info->pin_mosi < S3C2410_GPH10) { - s3c2410_gpio_setpin(info->pin_mosi, 0); - s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT); - } - - if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10) - s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT); - - ret = spi_bitbang_start(&sp->bitbang); - if (ret) - goto err_no_bitbang; - - return 0; - - err_no_bitbang: - spi_master_put(sp->bitbang.master); - err: - return ret; - -} - -static int s3c2410_spigpio_remove(struct platform_device *dev) -{ - struct s3c2410_spigpio *sp = platform_get_drvdata(dev); - - spi_bitbang_stop(&sp->bitbang); - spi_master_put(sp->bitbang.master); - - return 0; -} - -/* all gpio should be held over suspend/resume, so we should - * not need to deal with this -*/ - -#define s3c2410_spigpio_suspend NULL -#define s3c2410_spigpio_resume NULL - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_s3c24xx_gpio"); - -static struct platform_driver s3c2410_spigpio_drv = { - .probe = s3c2410_spigpio_probe, - .remove = s3c2410_spigpio_remove, - .suspend = s3c2410_spigpio_suspend, - .resume = s3c2410_spigpio_resume, - .driver = { - .name = "spi_s3c24xx_gpio", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_spigpio_init(void) -{ - return platform_driver_register(&s3c2410_spigpio_drv); -} - -static void __exit s3c2410_spigpio_exit(void) -{ - platform_driver_unregister(&s3c2410_spigpio_drv); -} - -module_init(s3c2410_spigpio_init); -module_exit(s3c2410_spigpio_exit); - -MODULE_DESCRIPTION("S3C24XX SPI Driver"); -MODULE_AUTHOR("Ben Dooks, "); -MODULE_LICENSE("GPL"); -- cgit v1.2.3