From 1aabf523a288b09d660992c22e307110c70f746d Mon Sep 17 00:00:00 2001 From: Christopher Covington Date: Fri, 1 Apr 2016 17:23:58 -0400 Subject: tty: amba-pl011: Use 32-bit accesses for SBSA UART Version 2 of the Server Base System Architecture (SBSAv2) describes UART hardware registers as 32 bits wide, giving no guidance on access sizes. The SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only supports full-length 32 bit register accesses, so use those exclusively. This is compatible with SBSAv3, which explicitly requires UART hardware support 32 (and 16 and sometimes 8) bit accesses. Tested on Juno, Midway, QDF2432, Seattle, and X-Gene 1. Tested-by: Mark Langsdorf Tested-by: Andre Przywara Acked-by: Andre Przywara Signed-off-by: Christopher Covington Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty/serial/amba-pl011.c') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7c198e0a3178..a2aa655f56c4 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -121,6 +121,7 @@ static struct vendor_data vendor_arm = { static struct vendor_data vendor_sbsa = { .reg_offset = pl011_std_offsets, + .access_32b = true, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, -- cgit v1.2.3