From ab66ca27c801605c6bb19baed2933544dd7d39e6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 4 Sep 2015 09:13:30 -0700 Subject: Revert "uart: pl011: Introduce register look up table" This reverts commit 2c096a9eedc6841d3610545f4e6c3d72bd0962be as with this patch the serial console is broken on lots of platforms. Reported-by: Marc Zyngier Cc: Jun Nie Acked-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 55 ++++------------------------------------- 1 file changed, 5 insertions(+), 50 deletions(-) (limited to 'drivers/tty/serial/amba-pl011.c') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e1f3bd5afad6..29a291d3bf24 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -76,7 +76,6 @@ struct vendor_data { unsigned int ifls; unsigned int lcrh_tx; unsigned int lcrh_rx; - u16 *reg_lut; bool oversampling; bool dma_threshold; bool cts_event_workaround; @@ -108,25 +107,6 @@ enum reg_idx { REG_DMACR = IDX(UART011_DMACR), }; -static u16 arm_reg[] = { - [REG_DR] = UART01x_DR, - [REG_RSR] = UART01x_RSR, - [REG_ST_DMAWM] = ~0, - [REG_FR] = UART01x_FR, - [REG_ST_LCRH_RX] = ~0, - [REG_ILPR] = UART01x_ILPR, - [REG_IBRD] = UART011_IBRD, - [REG_FBRD] = UART011_FBRD, - [REG_LCRH] = UART011_LCRH, - [REG_CR] = UART011_CR, - [REG_IFLS] = UART011_IFLS, - [REG_IMSC] = UART011_IMSC, - [REG_RIS] = UART011_RIS, - [REG_MIS] = UART011_MIS, - [REG_ICR] = UART011_ICR, - [REG_DMACR] = UART011_DMACR, -}; - static unsigned int get_fifosize_arm(struct amba_device *dev) { return amba_rev(dev) < 3 ? 16 : 32; @@ -136,7 +116,6 @@ static struct vendor_data vendor_arm = { .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_LCRH, - .reg_lut = arm_reg, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -146,7 +125,6 @@ static struct vendor_data vendor_arm = { }; static struct vendor_data vendor_sbsa = { - .reg_lut = arm_reg, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -154,25 +132,6 @@ static struct vendor_data vendor_sbsa = { .fixed_options = true, }; -static u16 st_reg[] = { - [REG_DR] = UART01x_DR, - [REG_RSR] = UART01x_RSR, - [REG_ST_DMAWM] = ST_UART011_DMAWM, - [REG_FR] = UART01x_FR, - [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX, - [REG_ILPR] = UART01x_ILPR, - [REG_IBRD] = UART011_IBRD, - [REG_FBRD] = UART011_FBRD, - [REG_LCRH] = UART011_LCRH, - [REG_CR] = UART011_CR, - [REG_IFLS] = UART011_IFLS, - [REG_IMSC] = UART011_IMSC, - [REG_RIS] = UART011_RIS, - [REG_MIS] = UART011_MIS, - [REG_ICR] = UART011_ICR, - [REG_DMACR] = UART011_DMACR, -}; - static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; @@ -182,7 +141,6 @@ static struct vendor_data vendor_st = { .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_ST_LCRH_RX, - .reg_lut = st_reg, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -228,7 +186,6 @@ struct uart_amba_port { struct uart_port port; struct clk *clk; const struct vendor_data *vendor; - u16 *reg_lut; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ unsigned int old_status; @@ -252,19 +209,19 @@ struct uart_amba_port { static unsigned int pl011_readw(struct uart_amba_port *uap, int index) { WARN_ON(index > REG_NR); - return readw_relaxed(uap->port.membase + uap->reg_lut[index]); + return readw_relaxed(uap->port.membase + (index << 2)); } static void pl011_writew(struct uart_amba_port *uap, int val, int index) { WARN_ON(index > REG_NR); - writew_relaxed(val, uap->port.membase + uap->reg_lut[index]); + writew_relaxed(val, uap->port.membase + (index << 2)); } static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index) { WARN_ON(index > REG_NR); - writeb_relaxed(val, uap->port.membase + uap->reg_lut[index]); + writeb_relaxed(val, uap->port.membase + (index << 2)); } /* @@ -367,7 +324,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct device *dev = uap->port.dev; struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + uap->reg_lut[REG_DR], + .dst_addr = uap->port.mapbase + REG_DR, .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, @@ -422,7 +379,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) if (chan) { struct dma_slave_config rx_conf = { - .src_addr = uap->port.mapbase + uap->reg_lut[REG_DR], + .src_addr = uap->port.mapbase + REG_DR, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 2, @@ -2456,7 +2413,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) return PTR_ERR(uap->clk); uap->vendor = vendor; - uap->reg_lut = vendor->reg_lut; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->get_fifosize(dev); @@ -2538,7 +2494,6 @@ static int sbsa_uart_probe(struct platform_device *pdev) return -ENOMEM; uap->vendor = &vendor_sbsa; - uap->reg_lut = vendor_sbsa.reg_lut; uap->fifosize = 32; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops; -- cgit v1.2.3