From 5f9d7b24e6fae276260c6dafc3c7d753c766a947 Mon Sep 17 00:00:00 2001 From: Rakesh Pillai Date: Fri, 15 Feb 2019 14:16:02 +0530 Subject: mac80211: Restore vif beacon interval if start ap fails commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream. The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Rakesh Pillai Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman --- net/mac80211/cfg.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 63558335e41e..ebc8045ddee6 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -884,6 +884,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, BSS_CHANGED_P2P_PS | BSS_CHANGED_TXPOWER; int err; + int prev_beacon_int; old = sdata_dereference(sdata->u.ap.beacon, sdata); if (old) @@ -906,6 +907,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, sdata->needed_rx_chains = sdata->local->rx_chains; + prev_beacon_int = sdata->vif.bss_conf.beacon_int; sdata->vif.bss_conf.beacon_int = params->beacon_interval; mutex_lock(&local->mtx); @@ -914,8 +916,10 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, if (!err) ieee80211_vif_copy_chanctx_to_vlans(sdata, false); mutex_unlock(&local->mtx); - if (err) + if (err) { + sdata->vif.bss_conf.beacon_int = prev_beacon_int; return err; + } /* * Apply control port protocol, this allows us to -- cgit v1.2.3