/* * Copyright 2014 Gateworks Corporation * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this file; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include / { /* these are used by bootloader for disabling nodes */ aliases { led0 = &led0; nand = &gpmi; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; }; chosen { bootargs = "console=ttymxc1,115200"; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; }; memory { reg = <0x10000000 0x20000000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_5p0v: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "5P0V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_usb_h1_vbus: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_usb_otg_vbus: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; }; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; status = "okay"; }; &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c3>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom2: eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom3: eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom4: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; }; rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; gpio_exp: pca9555@24 { compatible = "nxp,pca9555"; reg = <0x24>; gpio-controller; #gpio-cells = <2>; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ status = "disabled"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ status = "disabled"; }; &ssi1 { status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; }; &iomuxc { imx6qdl-gw51xx { pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ >; }; pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ >; }; pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 >; }; }; };