/*
 * Copyright (C) 2016 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/ {
	modem_reset: modem-reset {
		compatible = "gpio-reset";
		reset-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
		reset-delay-us = <1000>;
		#reset-cells = <0>;
	};

	regulators {
		wlreg_on: fixedregulator@100 {
			compatible = "regulator-fixed";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-name = "wlreg_on";
			gpio = <&gpio4 8 0>;
			startup-delay-us = <100>;
			enable-active-high;
		};
		vcc_sd3: regulator@0 {
			status = "disabled";
		};

	};

	bcmdhd_wlan_0: bcmdhd_wlan@0 {
		compatible = "android,bcmdhd_wlan";
		wlreg_on-supply = <&wlreg_on>;
		gpios = <&gpio7 9 0>; /* WL_HOST_WAKE */
	};
};

&iomuxc {
	imx6sxscm-evb-murata-v2_rc {
		pinctrl_bt: btgrp {
			fsl,pins = <
				MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0x13069
			>;
		};

		pinctrl_uart6: uart6grp {
			fsl,pins = <
				MX6SX_PAD_KEY_COL1__UART6_TX		0x1b0b1
				MX6SX_PAD_KEY_ROW1__UART6_RX		0x1b0b1
				MX6SX_PAD_KEY_COL0__UART6_RTS_B		0x1b0b1
				MX6SX_PAD_KEY_ROW0__UART6_CTS_B		0x1b0b1
			>;
		};

		pinctrl_usdhc3_1: usdhc3grp-1 {
			fsl,pins = <
				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069
				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069
				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069
				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069
				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069
			>;
		};

		pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
			fsl,pins = <
				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
			>;
		};

		pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
			fsl,pins = <
				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
			>;
		};

		/* For Murata, SD to 4-bit SDIO; use upper 4-bits for UART */
		pinctrl_wifi: wifigrp {
			fsl,pins = <
				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17069
				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10071
				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17069
				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17069
				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17069
				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17069
				/* Murata Module control signals */
				MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x13069
				MX6SX_PAD_SD3_DATA7__GPIO7_IO_9         0x13069
			>;
		};
	};
};

&uart6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart6
		     &pinctrl_bt>;
	fsl,uart-has-rtscts;
	resets = <&modem_reset>;
	status = "okay";
};

&usdhc2 {
	pinctrl-0 = <&pinctrl_wifi>;
	bus-width = <4>;
	non-removable;
	cd-post;
	pm-ignore-notify;
};

&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3_1>;
	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
	bus-width = <4>;
};