// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
 * Copyright 2016-2020 Toradex
 */

#include <dt-bindings/input/input.h>

/ {
	aliases {
		rtc0 = &rtc;
		rtc1 = &snvs_rtc;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	/* fixed crystal dedicated to mpc258x */
	clk16m: clk16m {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <16000000>;
	};

	extcon_usbc_det: usbc_det {
		compatible = "linux,extcon-usb-gpio";
		debounce = <25>;
		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbc_det>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpiokeys>;

		power {
			label = "Wake-Up";
			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
			linux,code = <KEY_WAKEUP>;
			debounce-interval = <10>;
			gpio-key,wakeup;
		};
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_5v0: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "5V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usbh_vbus: regulator-usbh-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh_reg>;
		regulator-name = "VCC_USB[1-4]";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
		vin-supply = <&reg_5v0>;
	};
};

&adc1 {
	status = "okay";
};

&adc2 {
	status = "okay";
};

&epxp {
	status = "okay";
};

&ecspi3 {
	mcp2515: can@0 {
		compatible = "microchip,mcp2515";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can_int>;
		reg = <0>;
		clocks = <&clk16m>;
		interrupt-parent = <&gpio5>;
		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
		spi-max-frequency = <10000000>;
		vdd-supply = <&reg_3v3>;
		xceiver-supply = <&reg_5v0>;
		status = "okay";
	};
	/* To keep the CAN controller enabled by default,
	 * disable conflicting spidev. This spidev device
	 * enables with the devicetree overlay.
	 */
	spidev0: spidev@0 {
		status = "disabled";
	};

};

&fec1 {
	status = "okay";
};

&i2c4 {
	status = "okay";

	/* M41T0M6 real time clock on carrier board */
	rtc: m41t0m6@68 {
		compatible = "st,m41t0";
		reg = <0x68>;
	};
};

&pwm1 {
	status = "okay";
};

&pwm2 {
	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
	status = "okay";
};

&pwm3 {
	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
	status = "okay";
};

&pwm4 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&usbotg1 {
	extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
	vbus-supply = <&reg_usbh_vbus>;
	status = "okay";
};

&usdhc1 {
	vmmc-supply = <&reg_3v3>;
	status = "okay";
};