// SPDX-License-Identifier: GPL-2.0 / { mbus@f1000000 { pciec: pcie@82000000 { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; #address-cells = <3>; #size-cells = <2>; bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &intc 9>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gate_clk 2>; status = "disabled"; }; }; }; ocp@f1000000 { pinctrl: pin-controller@10000 { compatible = "marvell,98dx4122-pinctrl"; }; }; }; &sata_phy0 { status = "disabled"; }; &sata_phy1 { status = "disabled"; };