/* * Copyright (c) 2015 Heiko Stuebner * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include #include #include "rk3288.dtsi" / { compatible = "netxeon,r89", "rockchip,rk3288"; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; ext_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "ext_gmac"; #clock-cells = <0>; }; gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; linux,input-type = <1>; wakeup-source; debounce-interval = <100>; }; }; ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; regulator-always-on; regulator-boot-on; }; vcc_otg: vcc-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg"; regulator-always-on; regulator-boot-on; }; vcc_sdmmc: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; vcc_sys: sys-regulator { compatible = "regulator-fixed"; regulator-name = "sys-supply"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; }; &cpu0 { cpu0-supply = <&vdd_cpu>; }; &gmac { phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; }; &hdmi { status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: pmic@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; regulator-name = "VDD_CPU"; regulator-enable-ramp-delay = <300>; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <8000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc_sys>; }; vdd_gpu: pmic@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; regulator-name = "VDD_GPU"; regulator-enable-ramp-delay = <300>; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <8000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc_sys>; }; rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; }; act8846: pmic@5a { compatible = "active-semi,act8846"; reg = <0x5a>; pinctrl-names = "default"; pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; system-power-controller; regulators { vcc_ddr: REG1 { regulator-name = "VCC_DDR"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; vcc_io: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_log: REG3 { regulator-name = "VDD_LOG"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcc_20: REG4 { regulator-name = "VCC_20"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; vccio_sd: REG5 { regulator-name = "VCCIO_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd10_lcd: REG6 { regulator-name = "VDD10_LCD"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcc_wl: REG7 { regulator-name = "VCC_WL"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcca_33: REG8 { regulator-name = "VCCA_33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_lan: REG9 { regulator-name = "VCC_LAN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vdd_10: REG10 { regulator-name = "VDD_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; vcc_18: REG11 { regulator-name = "VCC_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; vcc18_lcd: REG12 { regulator-name = "VCC18_LCD"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; }; }; }; &i2c5 { status = "okay"; }; &pinctrl { pcfg_output_high: pcfg-output-high { output-high; }; pcfg_output_low: pcfg-output-low { output-low; }; act8846 { pmic_vsel: pmic-vsel { rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; }; pwr_hold: pwr-hold { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>; }; }; buttons { pwrbtn: pwrbtn { rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir { ir_int: ir-int { rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { rockchip,pins = ; }; }; usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm0 { status = "okay"; }; &saradc { vref-supply = <&vcc_18>; status = "okay"; }; &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc_sdmmc>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; &tsadc { rockchip,hw-tshut-mode = <0>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; &uart0 { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &uart3 { status = "okay"; }; &uart4 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host1 { status = "okay"; }; &usb_otg { status = "okay"; }; &usbphy { status = "okay"; }; &vopb { status = "okay"; }; &vopb_mmu { status = "okay"; }; &vopl { status = "okay"; }; &vopl_mmu { status = "okay"; }; &wdt { status = "okay"; };