if ARCH_MX5

config ARCH_MX51
	bool "MX51"
	select ARCH_MXC_IOMUX_V3

config ARCH_MX53
	bool "MX53"

config ARCH_MX50
       bool
	   select ARCH_HAS_RNGC

config FORCE_MAX_ZONEORDER
    int "MAX_ORDER"
    default "13"

config MX5_OPTIONS
	bool
	default y
	select CPU_V7
	select USB_ARCH_HAS_EHCI
	select MXC_TZIC

config MX5_MULTI_ARCH
	bool
	default y
	select RUNTIME_PHYS_OFFSET
	depends on ARCH_MX51
	depends on ARCH_MX50 || ARCH_MX53

config MACH_MX51_3DS
	bool "Support MX51 3-Stack platform"
	select ARCH_MX51
	help
	  Include support for MX51 3-Stack platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX51_BABBAGE
	bool "Support MX51 BABBAGE platform"
	select ARCH_MX51
	help
	  Include support for MX51 Babbage platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX53_EVK
	bool "Support MX53 EVK platform"
	select ARCH_MX53
	help
	  Include support for MX53 EVK platform. This includes specific
	  configurations for the board and its peripherals.

config MACH_MX50_ARM2
       bool "Support MX50 Armadillo2 platform"
       select ARCH_MX50
       help
         Include support for MX50 EVK platform. This includes specific
         configurations for the board and its peripherals.


config MODULE_CCXMX51
	bool
config LATE_CPU_CLK_ENABLE
	bool

config MACH_MX50_RDP
	bool "Support MX50 Reference Design Platform"
	select ARCH_MX50
	help
	  Include support for MX50 RDP platform. This includes specific
	  configurations for the board and its peripherals.


config MACH_CCWMX51JS
	bool "Support for the ConnectCore Wi-i.MX51 module, on the JSK base board"
	select MODULE_CCXMX51
	select LATE_CPU_CLK_ENABLE
	help
	  Include support for the Digi ConnectCore Wi-i.MX51 Embedded Module, on the
	  JumpStart Kit base board. This includes specific configurations for the
	  peripherals on that base board.

config MACH_CCWMX51
	bool "Support for the ConnectCore Wi-i.MX51 module"
	select MODULE_CCXMX51
	select LATE_CPU_CLK_ENABLE
	help
	  Include support for the Digi ConnectCore Wi-i.MX51 Embedded Module, on a
	  custom board. The machine file should be modified to include support for
	  the interfaces available in that board.

config MACH_CCMX51JS
	bool "Support for the ConnectCore i.MX51 module, on the JSK base board"
	select MODULE_CCXMX51
	select LATE_CPU_CLK_ENABLE
	help
	  Include support for the Digi ConnectCore i.MX51 Embedded Module, on the
	  JumpStart Kit base board. This includes specific configurations for the
	  peripherals on that base board.

config MACH_CCMX51
	bool "Support for the ConnectCore i.MX51 module"
	select MODULE_CCXMX51
	select LATE_CPU_CLK_ENABLE
	help
	  Include support for the Digi ConnectCore i.MX51 Embedded Module, on a
	  custom board. The machine file should be modified to include support for
	  the interfaces available in that board.

choice
	prompt "Select development board variant:"
	default JSCCWMX51_V2

config JSCCWMX51_V1
	bool "ConnectCore for i.MX51 Early Availability Development Board"
	depends on MODULE_CCXMX51
	select CCWMX51_DISP0_RGB888 if CCWMX51_DISP0
	help
	  Select this option if you are using the development board included in
	  the Early Availability (EA) kit. The Digi part number for this board
	  revision is 30011032-01. It is printed on the top side of the
	  development board, close to the connectors of Signal Rail 1.

config JSCCWMX51_V2
	bool "ConnectCore for i.MX51 JumpStart Kit Development Board"
	depends on MODULE_CCXMX51
	select CCWMX51_DISP0_RGB666 if CCWMX51_DISP0
	help
	  Select this option if you are using the development board included in
	  Digi JumpStart Kit. The Digi part number for this board revision is
	  30011032-03. It is printed on the top side of the development board,
	  close to the connectors of Signal Rail 1.

config JSCCWMX51_CUSTOM
	bool "Custom ConnectCore for i.MX51 Carrier Board"
	depends on MODULE_CCXMX51
	help
	  Select this option if you are using your own custom-designed carrier
	  board.

endchoice


comment "MX5x Options:"

config MXC_SDMA_API
        bool "Use SDMA API"
        default y
        help
           This selects the Freescale MXC SDMA API.
           If unsure, say N.

config MXC_NAND_SWAP_BI
	bool

config ARCH_MXC_HAS_NFC_V3
        bool "MXC NFC Hardware Version 3"
        depends on ARCH_MX5
        default y
        help
           This selects the Freescale MXC Nand Flash Controller Hardware Version 3
           If unsure, say N.

config ARCH_MXC_HAS_NFC_V3_2
        bool "MXC NFC Hardware Version 3.2"
        depends on ARCH_MXC_HAS_NFC_V3
	select MXC_NAND_SWAP_BI if MODULE_CCXMX51
        default y
        help
           This selects the Freescale MXC Nand Flash Controller Hardware Version 3.2
           If unsure, say N.

config SDMA_IRAM
	bool "Use Internal RAM for SDMA transfer"
	depends on MXC_SDMA_API
	help
	  Support Internal RAM as SDMA buffer or control structures

endif

menu "Serial Port Options"
config UART1_ENABLED
	bool "Enable UART1"
	default y
	depends on SERIAL_MXC && MODULE_CCXMX51
	help
	  Enable the MX51 UART1 interface

choice
	prompt "Select the configuration for the UART lines:"
	default UART1_2WIRE_ENABLED
	depends on UART1_ENABLED

config UART1_2WIRE_ENABLED
	bool "Configure UART1 as 2 wire UART (RX/TX)"

config UART1_CTS_RTS_ENABLED
	bool "Configure UART1 as 4 wire UART (RX/TX/RTS/CTS)"

config UART1_FULL_UART_ENABLED
	bool "Configure UART1 as full UART (RX/TX/RTS/CTS/DCD/DTR/DSR/RI)"
endchoice

config UART1_IRDA_ENABLED
	bool "Enable IRDA mode"
	default n
	depends on UART1_ENABLED
	help
	  Enable IRDA mode

config UART2_ENABLED
	bool "Enable UART2"
	default y
	depends on SERIAL_MXC && MODULE_CCXMX51
	help
	  Enable the MX51 UART2 interface

config UART2_CTS_RTS_ENABLED
	bool "Configure RTS/CTS lines for UART2 hardware flow control"
	default n
	depends on UART2_ENABLED
	depends on !USB_EHCI_ARC_H1
	help
	  Configure the UART2 RTS/CTS lines for hardware flow control operation

comment "UART2 CTS/RTS is not available on the ConnectCore Wi-i.MX51 JumpStart board if"
	  depends on USB_EHCI_ARC_H1
comment "the support for Host1 of the Freescale USB controller is enabled."
	  depends on USB_EHCI_ARC_H1

config UART2_IRDA_ENABLED
	bool "Enable IRDA mode"
	default n
	depends on UART2_ENABLED
	help
	  Enable IRDA mode

comment "UART3 is not available on the ConnectCore Wi-i.MX51 JumpStart board if UART1"
	  depends on UART1_FULL_UART_ENABLED
comment "is configured as full UART. This may not be the case in a custom base board."
	  depends on UART1_FULL_UART_ENABLED

config UART3_ENABLED
	bool "Enable UART3"
	default y
	depends on SERIAL_MXC && MODULE_CCXMX51 && !UART1_FULL_UART_ENABLED
	help
	  Enable the MX51 UART3 interface

config UART3_CTS_RTS_ENABLED
	bool "Configure RTS/CTS lines for UART3 hardware flow control"
	default n
	depends on UART3_ENABLED
	help
	  Configure the UART3 RTS/CTS lines for hardware flow control operation

config UART3_IRDA_ENABLED
	bool "Enable IRDA mode"
	default n
	depends on UART3_ENABLED
	help
	  Enable IRDA mode

endmenu

menu "SPI Interface Options"
config SPI_MXC_SELECT1
	bool "Enable CSPI1"
	depends on SPI_MXC && MODULE_CCXMX51
	default y
	help
	  Enable the CSPI1 interface

config SPI_MXC_SELECT1_SS1
	bool "Enable SS1 line for CSPI1"
	depends on SPI_MXC_SELECT1 && MODULE_CCXMX51
	default y
	help
          Enable SS1 (slave select 1) line, used on ConnectCore Wi-i.MX51 base board SPI connector

config SPI_MXC_SELECT2
	bool "Enable CSPI2"
	depends on SPI_MXC && MODULE_CCXMX51
	default n
	help
	  Enable the CSPI2 interface

config SPI_MXC_SELECT3
	bool "Enable CSPI3"
	depends on SPI_MXC && MODULE_CCXMX51
	default n
	help
	  Enable the CSPI3 interface
endmenu

menu "I2C Interface options"

config I2C_MXC_SELECT1
	bool "Enable I2C1 module"
	default y
	depends on I2C_MXC
	depends on !MACH_CCWMX51JS
	help
	  Enable MX51 I2C1 module.

config I2C_MXC_SELECT2
	bool "Enable I2C2 module"
	default n
	depends on I2C_MXC
	help
	  Enable MX51 I2C2 module.

config I2C_MXC_SELECT3
	bool "Enable I2C3 module"
	default n
	depends on I2C_MXC
	help
	  Enable MX51 I2C3 module.

endmenu

menu "SD/MMC Interface options"

config ESDHCI_MXC_SELECT1
	bool "Enable SDHC 1"
	default y
	depends on MMC_IMX_ESDHCI
	help
	  Enable the SD Host Controller 1.

config ESDHCI_MXC_SELECT3
	bool "Enable SDHC 3"
	default y
	depends on MMC_IMX_ESDHCI
	help
	  Enable the SD Host Controller 3.

endmenu

if !FB_MXC_SYNC_PANEL
comment "---Video interface disabled"
endif

if FB_MXC_SYNC_PANEL
menu "Video Interface(s)"

choice
	prompt "Video color depth"
	default CCWMX51_DEFAULT_VIDEO_32BPP
	depends on MODULE_CCXMX51

config CCWMX51_DEFAULT_VIDEO_32BPP
	bool "32 bits per pixel"

config CCWMX51_DEFAULT_VIDEO_16BPP
	bool "16 bits per pixel"
endchoice

config CCWMX51_DEFAULT_VIDEO_BPP
	int
	depends on MODULE_CCXMX51
	default 32 if CCWMX51_DEFAULT_VIDEO_32BPP
	default 16 if CCWMX51_DEFAULT_VIDEO_16BPP

config CCWMX51_DISP0
	bool "Enable Display Interface 1 (primary)"
	help
	  This enables the i.MX51 Display Interface 1.

if CCWMX51_DISP0
choice
	prompt "Display 1 color mode"

config CCWMX51_DISP0_RGB888
	bool "24bit color mode"
	depends on JSCCWMX51_V1
	help
	  Configure Display 1 in 24bit color mode.

	  WARNING: The JumpStart Kit Development Board (30011032-02) is designed
	  to work in 18bit mode. To work in 24bit mode you need an Early Availability
	  Kit Development Board (30011032-01) or a custom designed board that
	  populates all 24 data lines of the video interface.

	  IMPORTANT: If Display 1 is configured for 24bit color depth, Display 2
	  will not be available.

config CCWMX51_DISP0_RGB666
	bool "18bit color mode"
	depends on JSCCWMX51_V2
	help
	  Configure Display 1 in 18bit color mode.  Use this mode if working
	  on a JumpStart Kit Development Board.

	  WARNING: The Early Availability Development Board (30011032-01) is
	  designed to work in 24bit mode. To work in 18bit mode you need a
	  JumpStart Kit Development Board (30011032-02) or a custom designed
	  board that only populates 18 data lines of the video interface.

endchoice
endif

comment "To enable the Display 2 Video interface, disable the FEC (under network drivers)"
	  depends on FEC || CCWMX51_DISP0_RGB888
comment "and set 18bit color mode for the Display 1"
	  depends on FEC || CCWMX51_DISP0_RGB888

config CCWMX51_DISP1
	bool "Enable Display Interface 2 (secondary)"
	depends on !FEC && !CCWMX51_DISP0_RGB888
	help
	  This enables the i.MX51 Display Interface 2 (18bit color mode only).

config CCWMX51_SECOND_TOUCH
	bool "Enable support for external touch controller (ADS7843)"
	depends on SPI_MXC_SELECT1
	select TOUCHSCREEN_ADS7846
	help
	  This enables the support for the external touch interface (ADS7843) available on the
	  High Resolution Display board, connected to the processor through SPI and that can be
	  used with the secondary display (but also with the primary)

endmenu
endif