/* * linux/arch/arm/mach-sa1100/irq.c * * Copyright (C) 1999-2001 Nicolas Pitre * * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include "generic.h" /* * SA1100 GPIO edge detection for IRQs: * IRQs are generated on Falling-Edge, Rising-Edge, or both. * Use this instead of directly setting GRER/GFER. */ static int GPIO_IRQ_rising_edge; static int GPIO_IRQ_falling_edge; static int GPIO_IRQ_mask = (1 << 11) - 1; /* * To get the GPIO number from an IRQ number */ #define GPIO_11_27_IRQ(i) ((i) - 21) #define GPIO11_27_MASK(irq) (1 << GPIO_11_27_IRQ(irq)) static int sa1100_gpio_type(struct irq_data *d, unsigned int type) { unsigned int mask; if (d->irq <= 10) mask = 1 << d->irq; else mask = GPIO11_27_MASK(d->irq); if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } if (type & IRQ_TYPE_EDGE_RISING) { GPIO_IRQ_rising_edge |= mask; } else GPIO_IRQ_rising_edge &= ~mask; if (type & IRQ_TYPE_EDGE_FALLING) { GPIO_IRQ_falling_edge |= mask; } else GPIO_IRQ_falling_edge &= ~mask; GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; return 0; } /* * GPIO IRQs must be acknowledged. This is for IRQs from 0 to 10. */ static void sa1100_low_gpio_ack(struct irq_data *d) { GEDR = (1 << d->irq); } static void sa1100_low_gpio_mask(struct irq_data *d) { ICMR &= ~(1 << d->irq); } static void sa1100_low_gpio_unmask(struct irq_data *d) { ICMR |= 1 << d->irq; } static int sa1100_low_gpio_wake(struct irq_data *d, unsigned int on) { if (on) PWER |= 1 << d->irq; else PWER &= ~(1 << d->irq); return 0; } static struct irq_chip sa1100_low_gpio_chip = { .name = "GPIO-l", .irq_ack = sa1100_low_gpio_ack, .irq_mask = sa1100_low_gpio_mask, .irq_unmask = sa1100_low_gpio_unmask, .irq_set_type = sa1100_gpio_type, .irq_set_wake = sa1100_low_gpio_wake, }; /* * IRQ11 (GPIO11 through 27) handler. We enter here with the * irq_controller_lock held, and IRQs disabled. Decode the IRQ * and call the handler. */ static void sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) { unsigned int mask; mask = GEDR & 0xfffff800; do { /* * clear down all currently active IRQ sources. * We will be processing them all. */ GEDR = mask; irq = IRQ_GPIO11; mask >>= 11; do { if (mask & 1) generic_handle_irq(irq); mask >>= 1; irq++; } while (mask); mask = GEDR & 0xfffff800; } while (mask); } /* * Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially. * In addition, the IRQs are all collected up into one bit in the * interrupt controller registers. */ static void sa1100_high_gpio_ack(struct irq_data *d) { unsigned int mask = GPIO11_27_MASK(d->irq); GEDR = mask; } static void sa1100_high_gpio_mask(struct irq_data *d) { unsigned int mask = GPIO11_27_MASK(d->irq); GPIO_IRQ_mask &= ~mask; GRER &= ~mask; GFER &= ~mask; } static void sa1100_high_gpio_unmask(struct irq_data *d) { unsigned int mask = GPIO11_27_MASK(d->irq); GPIO_IRQ_mask |= mask; GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; } static int sa1100_high_gpio_wake(struct irq_data *d, unsigned int on) { if (on) PWER |= GPIO11_27_MASK(d->irq); else PWER &= ~GPIO11_27_MASK(d->irq); return 0; } static struct irq_chip sa1100_high_gpio_chip = { .name = "GPIO-h", .irq_ack = sa1100_high_gpio_ack, .irq_mask = sa1100_high_gpio_mask, .irq_unmask = sa1100_high_gpio_unmask, .irq_set_type = sa1100_gpio_type, .irq_set_wake = sa1100_high_gpio_wake, }; /* * We don't need to ACK IRQs on the SA1100 unless they're GPIOs * this is for internal IRQs i.e. from 11 to 31. */ static void sa1100_mask_irq(struct irq_data *d) { ICMR &= ~(1 << d->irq); } static void sa1100_unmask_irq(struct irq_data *d) { ICMR |= (1 << d->irq); } /* * Apart form GPIOs, only the RTC alarm can be a wakeup event. */ static int sa1100_set_wake(struct irq_data *d, unsigned int on) { if (d->irq == IRQ_RTCAlrm) { if (on) PWER |= PWER_RTC; else PWER &= ~PWER_RTC; return 0; } return -EINVAL; } static struct irq_chip sa1100_normal_chip = { .name = "SC", .irq_ack = sa1100_mask_irq, .irq_mask = sa1100_mask_irq, .irq_unmask = sa1100_unmask_irq, .irq_set_wake = sa1100_set_wake, }; static struct resource irq_resource = { .name = "irqs", .start = 0x90050000, .end = 0x9005ffff, }; static struct sa1100irq_state { unsigned int saved; unsigned int icmr; unsigned int iclr; unsigned int iccr; } sa1100irq_state; static int sa1100irq_suspend(void) { struct sa1100irq_state *st = &sa1100irq_state; st->saved = 1; st->icmr = ICMR; st->iclr = ICLR; st->iccr = ICCR; /* * Disable all GPIO-based interrupts. */ ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7| IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2| IC_GPIO1|IC_GPIO0); /* * Set the appropriate edges for wakeup. */ GRER = PWER & GPIO_IRQ_rising_edge; GFER = PWER & GPIO_IRQ_falling_edge; /* * Clear any pending GPIO interrupts. */ GEDR = GEDR; return 0; } static void sa1100irq_resume(void) { struct sa1100irq_state *st = &sa1100irq_state; if (st->saved) { ICCR = st->iccr; ICLR = st->iclr; GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; ICMR = st->icmr; } } static struct syscore_ops sa1100irq_syscore_ops = { .suspend = sa1100irq_suspend, .resume = sa1100irq_resume, }; static int __init sa1100irq_init_devicefs(void) { register_syscore_ops(&sa1100irq_syscore_ops); return 0; } device_initcall(sa1100irq_init_devicefs); void __init sa1100_init_irq(void) { unsigned int irq; request_resource(&iomem_resource, &irq_resource); /* disable all IRQs */ ICMR = 0; /* all IRQs are IRQ, not FIQ */ ICLR = 0; /* clear all GPIO edge detects */ GFER = 0; GRER = 0; GEDR = -1; /* * Whatever the doc says, this has to be set for the wait-on-irq * instruction to work... on a SA1100 rev 9 at least. */ ICCR = 1; for (irq = 0; irq <= 10; irq++) { irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = 12; irq <= 31; irq++) { irq_set_chip_and_handler(irq, &sa1100_normal_chip, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } for (irq = 32; irq <= 48; irq++) { irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* * Install handler for GPIO 11-27 edge detect interrupts */ irq_set_chip(IRQ_GPIO11_27, &sa1100_normal_chip); irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); sa1100_init_gpio(); }