// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * Copyright 2019 Toradex
 */

/ {
	aliases {
		rtc0 = &rtc_i2c;
		rtc1 = &rtc;
	};

	reg_usb_host_vbus: regulator-usb-host-vbus {
		regulator-name = "VCC USBH2(ABCD) / USBH(3|4)";
	};
};

&acm {
	status = "okay";
};

&adc0 {
	status = "okay";
};

&adc1 {
	status = "okay";
};

&amix {
	status = "okay";
};

&asrc0 {
	status = "okay";
};

&backlight {
	default-brightness-level = <4>;
	brightness-levels = <0 45 63 88 119 158 203 255>;
	pwms = <&lvds1_pwm 0 6666667 PWM_POLARITY_INVERTED>;
	status = "okay";
};

&dpr1_channel1 {
	status = "okay";
};

&dpr1_channel2 {
	status = "okay";
};

&dpr1_channel3 {
	status = "okay";
};

&dpr2_channel1 {
	status = "okay";
};

&dpr2_channel2 {
	status = "okay";
};

&dpr2_channel3 {
	status = "okay";
};

&dpr3_channel1 {
	status = "okay";
};

&dpr3_channel2 {
	status = "okay";
};

&dpr3_channel3 {
	status = "okay";
};

&dpr4_channel1 {
	status = "okay";
};

&dpr4_channel2 {
	status = "okay";
};

&dpr4_channel3 {
	status = "okay";
};

&dpu1 {
	status = "okay";
};

&dpu2 {
	status = "okay";
};

&fec1 {
	status = "okay";
};

&flexcan1 {
	status = "okay";
};

&flexcan2 {
	status = "okay";
};

&gpio2 {
	/*
	 * Add GPIO2_20 as a wakeup source:
	 * Pin:  SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
	 * Type: SC_PAD_WAKEUP_FALL_EDGE
	 * Line: 20
	 */
	 pad-wakeup = <101 5 20>;
	 pad-wakeup-num = <1>;
};

&gpu_3d0 {
	status = "okay";
};

&gpu_3d1 {
	status = "okay";
};

&hdmi {
	status = "okay";
};

/* Apalis I2C2 (DDC) */
&i2c0 {
	status = "okay";
};

/* Apalis I2C1 */
&i2c2 {
	status = "okay";

	/* M41T0M6 real time clock on carrier board */
	rtc_i2c: rtc@68 {
		compatible = "st,m41t0";
		reg = <0x68>;
	};

	atmel_mxt_ts: atmel_mxt_ts@4a {
		compatible = "atmel,maxtouch";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
		reg = <0x4a>;
		interrupt-parent = <&gpio4>;
		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;    /* Apalis GPIO5 */
		reset-gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* Apalis GPIO6 */
		status = "okay";
	};
};

/* Apalis I2C3 (CAM) */
&i2c3 {
	status = "okay";

	ov5640_mipi: ov5640_mipi@3c {
		compatible = "ovti,ov5640_mipi_v3";
		clocks = <&clk IMX8QM_24MHZ>;
		clock-names = "csi_mclk";
		csi_id = <1>;
		mclk = <24000000>;
		mclk_source = <0>;
		mipi_csi;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>;
		pwn-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* Apalis GPIO2 */
		reg = <0x3c>;
		rst-gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;  /* Apalis GPIO1 */
		status = "okay";

		port {
			ov5640_ep: endpoint {
				remote-endpoint = <&mipi_csi1_ep>;
			};
		};
	};
};

&imx8_gpu_ss {
	status = "okay";
};

&intmux_cm40 {
	status = "okay";
};

&intmux_cm41 {
	status = "okay";
};

&irqsteer_hdmi {
	status = "okay";
};

&isi_0 {
	status = "okay";
};

&isi_1 {
	status = "okay";
};

&isi_2 {
	status = "okay";
};

&isi_3 {
	status = "okay";
};

&isi_4 {
	status = "okay";
};

&isi_5 {
	status = "okay";
};

&isi_6 {
	status = "okay";
};

&isi_7 {
	status = "okay";
};

&ldb2_phy {
	status = "okay";
};

/* Apalis SPI1 */
&lpspi0 {
	status = "okay";
};

/* Apalis SPI2 */
&lpspi2 {
	status = "okay";
};

/* Apalis UART3 */
&lpuart0 {
	status = "okay";
};

/* Apalis UART1 */
&lpuart1 {
	status = "okay";
};

/* Apalis UART4 */
&lpuart2 {
	status = "okay";
};

/* Apalis UART2 */
&lpuart3 {
	status = "okay";
};

/* Apalis BKL1_PWM */
&lvds1_pwm {
	status = "okay";
};

&mipi_csi_1 {
	status = "okay";
};

/* Apalis PCIE1 */
&pciea{
	status = "okay";
};

&pixel_combiner1 {
	status = "okay";
};

&pixel_combiner2 {
	status = "okay";
};

&prg1 {
	status = "okay";
};

&prg2 {
	status = "okay";
};

&prg3 {
	status = "okay";
};

&prg4 {
	status = "okay";
};

&prg5 {
	status = "okay";
};

&prg6 {
	status = "okay";
};

&prg7 {
	status = "okay";
};

&prg8 {
	status = "okay";
};

&prg9 {
	status = "okay";
};

&prg10 {
	status = "okay";
};

&prg11 {
	status = "okay";
};

&prg12 {
	status = "okay";
};

&prg13 {
	status = "okay";
};

&prg14 {
	status = "okay";
};

&prg15 {
	status = "okay";
};

&prg16 {
	status = "okay";
};

&prg17 {
	status = "okay";
};

&prg18 {
	status = "okay";
};

/* Apalis PWM3, MXM3 pin 6 */
&pwm0 {
	status = "okay";
};

/* Apalis PWM4, MXM3 pin 8 */
&pwm1 {
	status = "okay";
};

/* Apalis PWM1, MXM3 pin 2 */
&pwm2 {
	status = "okay";
};

/* Apalis PWM2, MXM3 pin 4 */
&pwm3 {
	status = "okay";
};

&rpmsg {
	status = "okay";
};

&rpmsg1 {
	status = "okay";
};

&sai1 {
	status = "okay";
};

&sai6 {
	status = "okay";
};

&sai7 {
	status = "okay";
};

&sai_hdmi_tx {
	status = "okay";
};

/* Apalis SATA1 */
&sata {
	status = "okay";
};

/* Apalis SPDIF1 */
&spdif0 {
	status = "okay";
};

&spdif1 {
	status = "okay";
};

/* Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
&usbh1 {
	vbus-supply = <&reg_usb_host_vbus>;
	status = "okay";
};

/* Apalis USBO1 */
&usbotg1 {
	status = "okay";
};

/* Apalis USBH4 SuperSpeed */
&usbotg3 {
	dr_mode = "host";
	vbus-supply = <&reg_usb_host_vbus>;
	status = "okay";
};

/* Apalis MMC1 */
&usdhc2 {
	status = "okay";
};

/* Apalis SD1 */
&usdhc3 {
	status = "okay";
};

&vpu_decoder {
	status = "okay";
};

&vpu_encoder {
	status = "okay";
};

&wakeup_key {
		status = "okay";
};