// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * Copyright 2018-2019 Toradex
 */

/dts-v1/;

#include "dt-bindings/pwm/pwm.h"
#include "fsl-imx8qxp-colibri.dtsi"
#include "fsl-imx8qxp-colibri-eval-v3.dtsi"

/ {
	model = "Toradex Colibri iMX8QXP/DX with single channel lvds";
	compatible = "toradex,colibri-imx8qxp-lvds-single-eval-v3", "toradex,colibri-imx8qxp", "fsl,imx8qxp";

	lvds1_panel {
		compatible = "logictechno,lt170410-2whc";
		backlight = <&backlight>;

		port {
			panel_lvds1_in: endpoint {
				remote-endpoint = <&lvds1_out>;
			};
		};
	};
};

/* Colibri Parallel RGB */
&adma_lcdif {
	status = "disabled";
};

/*
 * Atmel maxtouch controller
 * To enable it, you should disable pwm0 (PWM_B) and pwm1 (PWM_C)
 */
&atmel_mxt_ts {
        pinctrl-0 = <&pinctrl_touch>;
        interrupt-parent = <&gpio0>;
        interrupts = <21 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 28 */
        reset-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;     /* SODIMM 30 */
	status = "okay";
};

&backlight {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio_bklght_on>;
	brightness-levels = <0 45 63 88 119 158 203 255>;
	default-brightness-level = <4>;
	enable-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; /* Ext.Conn 25: LVDS1_GPIO0_00 */
	pwms = <&pwm_adma_lcdif 0 6666667 PWM_POLARITY_INVERTED>;
	status = "okay";
};

/* Display Prefetch Resolve, (Tiling) */
&dpr1_channel1 {
	status = "okay";
};

&dpr1_channel2 {
	status = "okay";
};

&dpr1_channel3 {
	status = "okay";
};

&dpr2_channel1 {
	status = "okay";
};

&dpr2_channel2 {
	status = "okay";
};

&dpr2_channel3 {
	status = "okay";
};

&dpu1 {
	status = "okay";
};

&gpu_3d0 {
	status = "okay";
};

&imx8_gpu_ss {
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";

	colibri-imx8qxp {
		pinctrl_touch: touchgrp {
			fsl,pins = <
				SC_P_UART1_TX_LSIO_GPIO0_IO21	0x06000040	/* SODIMM  28 */
				SC_P_UART1_RX_LSIO_GPIO0_IO22	0x06000020	/* SODIMM  30 */
			>;
		};

		pinctrl_gpio_bklght_on: gpio-bl-on {
			fsl,pins = <
				SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31		0x00000020
			>;
		};
	};
};

&ldb1_phy {
	status = "okay";
};

&ldb1 {
	status = "okay";

	lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <24>; /* Actually would need 18 but isn't supported by the driver */
		status = "okay";

		port@1 {
			reg = <1>;

			lvds1_out: endpoint {
				remote-endpoint = <&panel_lvds1_in>;
			};
		};
	};
};

&mipi_dsi_phy1 {
	status = "okay";
};

&mipi_dsi1 {
	status = "okay";
};

&mipi_dsi_bridge1 {
	status = "disabled";
};

/* On-module MIPI DSI accessible on FFC (X2) */
&i2c0_mipi_lvds1 {
	status = "disabled";
};

&ldb2_phy {
	status = "disabled";
};

&ldb2 {
	status = "disabled";
};

&mipi_dsi_phy2 {
	status = "disabled";
};

&mipi_dsi2 {
	status = "disabled";
};

&mipi_dsi_bridge2 {
	status = "disabled";
};

&i2c1 {
	status = "okay";
};

&pixel_combiner {
	status = "okay";
};

&prg1 {
	status = "okay";
};

&prg2 {
	status = "okay";
};

&prg3 {
	status = "okay";
};

&prg4 {
	status = "okay";
};

&prg5 {
	status = "okay";
};

&prg6 {
	status = "okay";
};

&prg7 {
	status = "okay";
};

&prg8 {
	status = "okay";
};

&prg9 {
	status = "okay";
};

/* Colibri PWM_B */
&pwm0 {
	status = "disabled";
};

/* Colibri PWM_C */
&pwm1 {
	status = "disabled";
};