// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * Copyright 2018-2021 Toradex
 */

/ {
	extcon_usbc_det: usbc_det {
		compatible = "linux,extcon-usb-gpio";
		debounce = <25>;
		id-gpio = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbc_det>;
	};

	reg_usbh_vbus: regulator-usbh-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh1_reg>;
		regulator-name = "usbh_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>;
		regulator-always-on;
	};
};

/* Colibri Ethernet */
&fec1 {
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog2>;
};

&lpspi2 {
	fsl,spi-num-chipselects = <2>;
	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW
		    &lsio_gpio5 2 GPIO_ACTIVE_LOW>;

	spidev1: spidev@1 {
		compatible = "toradex,evalspi";
		reg = <1>;
		spi-max-frequency = <10000000>;
	};
};

/* Colibri UART_B */
&lpuart0 {
	status = "okay";
};

/* Colibri UART_C */
&lpuart2 {
	status = "okay";
};

/* Colibri UART_A */
&lpuart3 {
	status= "okay";
};

/* USB PHY for &usbotg3 */
&usb3phynop1 {
	status = "okay";
};

&usbotg1 {
	extcon = <&extcon_usbc_det &extcon_usbc_det>;
	vbus-supply = <&reg_usbh_vbus>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-active-high;
	disable-over-current;
	status = "okay";
};

&usbotg3 {
	dr_mode = "host";
	status = "okay";
};

/* USB PHY for &usbotg1 */
&usbphy1 {
	status = "okay";
};

/* Colibri SDCard */
&usdhc2 {
	status = "okay";
};