// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2019 Toradex
 */

#include "dt-bindings/input/linux-event-codes.h"

/ {
	aliases {
		rtc0 = &rtc_i2c;
		rtc1 = &rtc;
	};

	/* fixed crystal dedicated to mcp25xx */
	clk16m: clock-16mhz {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <16000000>;
	};
};

/* Colibri Analogue Inputs */
&adc0 {
	status = "okay";
};

&colibri_gpio_keys {
	status = "okay";
};

&extcon_usbc_det {
	status = "okay";
};

&i2c1 {
	status = "okay";

	/* M41T0M6 real time clock on carrier board */
	rtc_i2c: rtc@68 {
		compatible = "st,m41t0";
		reg = <0x68>;
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
		    <&pinctrl_lpspi2_cs2>;
};

/* Colibri SPI */
&lpspi2 {
	status = "okay";

	mcp2515: can@0 {
		compatible = "microchip,mcp2515";
		reg = <0>;
		interrupt-parent = <&lsio_gpio3>;
		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
		pinctrl-0 = <&pinctrl_can_int>;
		pinctrl-names = "default";
		clocks = <&clk16m>;
		spi-max-frequency = <10000000>;
	};
};

/* Colibri UART_B */
&lpuart0 {
	status= "okay";
};

/* Colibri UART_C */
&lpuart2 {
	status= "okay";
};

&lsio_gpio3 {
	/*
	 * Add GPIO3_10 as a wakeup source:
	 * Pin:  157	SC_P_QSPI0A_DATA1 (SODIMM_45)
	 * Type: 6	SC_PAD_WAKEUP_RISE_EDGE
	 * Line: 10	GPIO3_IO10
	 */
	pad-wakeup = <IMX8QXP_QSPI0A_DATA1 6 10>;
	pad-wakeup-num = <1>;
 };

/* Colibri PWM_B */
&lsio_pwm0 {
	status = "okay";
};

/* Colibri PWM_C */
&lsio_pwm1 {
	status = "okay";
};

/* Colibri PWM_D */
&lsio_pwm2 {
	status = "okay";
};

/* Colibri UART_A */
&lpuart3 {
	status= "okay";
};

/* Colibri FastEthernet */
&fec1 {
	status = "okay";
};

&reg_usbh_vbus {
	status = "okay";
};

/* USB PHY for &usbotg3 */
&usb3_phy {
	status = "okay";
};

&usbotg1 {
	extcon = <&extcon_usbc_det &extcon_usbc_det>;
	vbus-supply = <&reg_usbh_vbus>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-active-high;
	disable-over-current;
	status = "okay";
};

&usbotg3 {
	status = "okay";
};

&usbotg3_cdns3 {
	dr_mode = "host";
	status = "okay";
};

/* USB PHY for &usbotg1 */
&usbphy1 {
	status = "okay";
};

/* Colibri SD/MMC Card */
&usdhc2 {
	status = "okay";
};