// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2020 NXP
 */

/delete-node/ &cm40_i2c;
/delete-node/ &i2c1;

&i2c_rpbus_1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	ptn5110: tcpc@50 {
		compatible = "nxp,ptn5110";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_typec>;
		reg = <0x50>;
		interrupt-parent = <&lsio_gpio1>;
		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
		status = "okay";

		usb_con1: connector {
			compatible = "usb-c-connector";
			label = "USB-C";
			power-role = "source";
			data-role = "dual";
			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@1 {
					reg = <1>;
					typec_con_ss: endpoint {
						remote-endpoint = <&usb3_data_ss>;
					};
				};
			};
		};
	};
};

&i2c_rpbus_5 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	pca6416: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	wm8960: wm8960@1a {
		compatible = "wlf,wm8960";
		reg = <0x1a>;
		clocks = <&mclkout0_lpcg 0>;
		clock-names = "mclk";
		wlf,shared-lrclk;
		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
				<&mclkout0_lpcg 0>;
		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
	};

	cs42888: cs42888@48 {
		compatible = "cirrus,cs42888";
		reg = <0x48>;
		clocks = <&mclkout0_lpcg 0>;
		clock-names = "mclk";
		VA-supply = <&reg_audio>;
		VD-supply = <&reg_audio>;
		VLS-supply = <&reg_audio>;
		VLC-supply = <&reg_audio>;
		reset-gpio = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
				<&mclkout0_lpcg 0>;
		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
		fsl,txs-rxm;
	};

	ov5640: ov5640@3c {
		compatible = "ovti,ov5640";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_parallel_csi>;
		clocks = <&pi0_misc_lpcg 0>;
		assigned-clocks = <&pi0_misc_lpcg 0>;
		assigned-clock-rates = <24000000>;
		clock-names = "xclk";
		powerdown-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
		csi_id = <0>;
		mclk = <24000000>;
		mclk_source = <0>;
		status = "okay";
		port {
			ov5640_ep: endpoint {
				remote-endpoint = <&parallel_csi_ep>;
				bus-type = <5>; /* V4L2_FWNODE_BUS_TYPE_PARALLEL */
				bus-width = <8>;
				vsync-active = <0>;
				hsync-active = <1>;
				pclk-sample = <1>;
			};
		};
	};
};

&i2c_rpbus_12 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	max7322: gpio@68 {
		compatible = "maxim,max7322";
		reg = <0x68>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&i2c_rpbus_14 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	fxos8700@1e {
		compatible = "fsl,fxos8700";
		reg = <0x1e>;
		interrupt-open-drain;
	};

	fxas2100x@21 {
		compatible = "fsl,fxas2100x";
		reg = <0x21>;
		interrupt-open-drain;
	};

	pressure-sensor@60 {
		compatible = "fsl,mpl3115";
		reg = <0x60>;
		interrupt-open-drain;
	};
};

&i2c_rpbus_15 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	pca9557_a: gpio@1a {
		compatible = "nxp,pca9557";
		reg = <0x1a>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	pca9557_b: gpio@1d {
		compatible = "nxp,pca9557";
		reg = <0x1d>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	isl29023@44 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_isl29023>;
		compatible = "fsl,isl29023";
		reg = <0x44>;
		rext = <499>;
		interrupt-parent = <&lsio_gpio1>;
		interrupts = <2 2>;
	};
};

&cm40_i2c_lpcg {
	status = "disabled";
};

&i2c1_lpcg {
	status = "disabled";
};

&can0_lpcg {
	status = "disabled";
};

&reg_can_en {
	status = "disabled";
};

&reg_can_stby {
	status = "disabled";
};

&flexcan1 {
	status = "disabled";
};

&flexcan2 {
	status = "disabled";
};

&cm40_intmux {
	status = "disabled";
};

&flexspi0 {
	status = "disabled";
};

&lpuart3 {
	status = "disabled";
};

&uart3_lpcg {
	status = "disabled";
};

&imx8x_cm4 {
	/* Assume you have partitioned M4, so M4 is ont controled by Linux */
	/delete-property/ power-domains;
};