/* * MPC8610 HPCD board specific routines * * Initial author: Xianghua Xiao * Recode: Jason Jin * York Sun * * Rewrite the interrupt routing. remove the 8259PIC support, * All the integrated device in ULI use sideband interrupt. * * Copyright 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static unsigned char *pixis_bdcfg0, *pixis_arch; static struct of_device_id __initdata mpc8610_ids[] = { { .compatible = "fsl,mpc8610-immr", }, { .compatible = "simple-bus", }, {} }; static int __init mpc8610_declare_of_platform_devices(void) { /* Without this call, the SSI device driver won't get probed. */ of_platform_bus_probe(NULL, mpc8610_ids, NULL); return 0; } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); static void __init mpc86xx_hpcd_init_irq(void) { struct mpic *mpic1; struct device_node *np; struct resource res; /* Determine PIC address. */ np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) return; of_address_to_resource(np, 0, &res); /* Alloc mpic structure and per isu has 16 INT entries. */ mpic1 = mpic_alloc(np, res.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 0, 256, " MPIC "); BUG_ON(mpic1 == NULL); mpic_init(mpic1); } #ifdef CONFIG_PCI static void __devinit quirk_uli1575(struct pci_dev *dev) { u32 temp32; /* Disable INTx */ pci_read_config_dword(dev, 0x48, &temp32); pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); /* Enable sideband interrupt */ pci_read_config_dword(dev, 0x90, &temp32); pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); } static void __devinit quirk_uli5288(struct pci_dev *dev) { unsigned char c; unsigned short temp; /* Interrupt Disable, Needed when SATA disabled */ pci_read_config_word(dev, PCI_COMMAND, &temp); temp |= 1<<10; pci_write_config_word(dev, PCI_COMMAND, temp); pci_read_config_byte(dev, 0x83, &c); c |= 0x80; pci_write_config_byte(dev, 0x83, c); pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); pci_read_config_byte(dev, 0x83, &c); c &= 0x7f; pci_write_config_byte(dev, 0x83, c); } /* * Since 8259PIC was disabled on the board, the IDE device can not * use the legacy IRQ, we need to let the IDE device work under * native mode and use the interrupt line like other PCI devices. * IRQ14 is a sideband interrupt from IDE device to CPU and we use this * as the interrupt for IDE device. */ static void __devinit quirk_uli5229(struct pci_dev *dev) { unsigned char c; pci_read_config_byte(dev, 0x4b, &c); c |= 0x10; pci_write_config_byte(dev, 0x4b, c); } /* * SATA interrupt pin bug fix * There's a chip bug for 5288, The interrupt pin should be 2, * not the read only value 1, So it use INTB#, not INTA# which * actually used by the IDE device 5229. * As of this bug, during the PCI initialization, 5288 read the * irq of IDE device from the device tree, this function fix this * bug by re-assigning a correct irq to 5288. * */ static void __devinit final_uli5288(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); struct device_node *hosenode = hose ? hose->dn : NULL; struct of_irq oirq; int virq, pin = 2; u32 laddr[3]; if (!hosenode) return; laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); laddr[1] = laddr[2] = 0; of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); dev->irq = virq; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); #endif /* CONFIG_PCI */ #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) static u32 get_busfreq(void) { struct device_node *node; u32 fs_busfreq = 0; node = of_find_node_by_type(NULL, "cpu"); if (node) { unsigned int size; const unsigned int *prop = of_get_property(node, "bus-frequency", &size); if (prop) fs_busfreq = *prop; of_node_put(node); }; return fs_busfreq; } unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel, int monitor_port) { static const unsigned long pixelformat[][3] = { {0x88882317, 0x88083218, 0x65052119}, {0x88883316, 0x88082219, 0x65053118}, }; unsigned int pix_fmt, arch_monitor; arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; /* DVI port for board version 0x01 */ if (bits_per_pixel == 32) pix_fmt = pixelformat[arch_monitor][0]; else if (bits_per_pixel == 24) pix_fmt = pixelformat[arch_monitor][1]; else if (bits_per_pixel == 16) pix_fmt = pixelformat[arch_monitor][2]; else pix_fmt = pixelformat[1][0]; return pix_fmt; } void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) { int i; if (monitor_port == 2) { /* dual link LVDS */ for (i = 0; i < 256*3; i++) gamma_table_base[i] = (gamma_table_base[i] << 2) | ((gamma_table_base[i] >> 6) & 0x03); } } #define PX_BRDCFG0_DVISEL (1 << 3) #define PX_BRDCFG0_DLINK (1 << 4) #define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK) void mpc8610hpcd_set_monitor_port(int monitor_port) { static const u8 bdcfg[] = { PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK, PX_BRDCFG0_DLINK, 0, }; if (monitor_port < 3) clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK, bdcfg[monitor_port]); } void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) { u32 __iomem *clkdvdr; u32 temp; /* variables for pixel clock calcs */ ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock; ulong pixval; long err; int i; clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32)); if (!clkdvdr) { printk(KERN_ERR "Err: can't map clock divider register!\n"); return; } /* Pixel Clock configuration */ pr_debug("DIU: Bus Frequency = %d\n", get_busfreq()); speed_ccb = get_busfreq(); /* Calculate the pixel clock with the smallest error */ /* calculate the following in steps to avoid overflow */ pr_debug("DIU pixclock in ps - %d\n", pixclock); temp = 1000000000/pixclock; temp *= 1000; pixclock = temp; pr_debug("DIU pixclock freq - %u\n", pixclock); temp = pixclock * 5 / 100; pr_debug("deviation = %d\n", temp); minpixclock = pixclock - temp; maxpixclock = pixclock + temp; pr_debug("DIU minpixclock - %lu\n", minpixclock); pr_debug("DIU maxpixclock - %lu\n", maxpixclock); pixval = speed_ccb/pixclock; pr_debug("DIU pixval = %lu\n", pixval); err = 100000000; bestval = pixval; pr_debug("DIU bestval = %lu\n", bestval); bestfreq = 0; for (i = -1; i <= 1; i++) { temp = speed_ccb / ((pixval+i) + 1); pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n", i, pixval, temp); if ((temp < minpixclock) || (temp > maxpixclock)) pr_debug("DIU exceeds monitor range (%lu to %lu)\n", minpixclock, maxpixclock); else if (abs(temp - pixclock) < err) { pr_debug("Entered the else if block %d\n", i); err = abs(temp - pixclock); bestval = pixval+i; bestfreq = temp; } } pr_debug("DIU chose = %lx\n", bestval); pr_debug("DIU error = %ld\n NomPixClk ", err); pr_debug("DIU: Best Freq = %lx\n", bestfreq); /* Modify PXCLK in GUTS CLKDVDR */ pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr)); temp = (*clkdvdr) & 0x2000FFFF; *clkdvdr = temp; /* turn off clock */ *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16); pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr)); iounmap(clkdvdr); } ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf) { return snprintf(buf, PAGE_SIZE, "%c0 - DVI\n" "%c1 - Single link LVDS\n" "%c2 - Dual link LVDS\n", monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ', monitor_port == 2 ? '*' : ' '); } int mpc8610hpcd_set_sysfs_monitor_port(int val) { return val < 3 ? val : 0; } #endif static void __init mpc86xx_hpcd_setup_arch(void) { struct resource r; struct device_node *np; unsigned char *pixis; if (ppc_md.progress) ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0); #ifdef CONFIG_PCI for_each_node_by_type(np, "pci") { if (of_device_is_compatible(np, "fsl,mpc8610-pci") || of_device_is_compatible(np, "fsl,mpc8641-pcie")) { struct resource rsrc; of_address_to_resource(np, 0, &rsrc); if ((rsrc.start & 0xfffff) == 0xa000) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); } } #endif #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) preallocate_diu_videomemory(); diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock; diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port; diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port; #endif np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); if (np) { of_address_to_resource(np, 0, &r); of_node_put(np); pixis = ioremap(r.start, 32); if (!pixis) { printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); return; } pixis_bdcfg0 = pixis + 8; pixis_arch = pixis + 1; } else printk(KERN_ERR "Err: " "can't find device node 'fsl,fpga-pixis'\n"); printk("MPC86xx HPCD board from Freescale Semiconductor\n"); } /* * Called very early, device-tree isn't unflattened */ static int __init mpc86xx_hpcd_probe(void) { unsigned long root = of_get_flat_dt_root(); if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD")) return 1; /* Looks good */ return 0; } static long __init mpc86xx_time_init(void) { unsigned int temp; /* Set the time base to zero */ mtspr(SPRN_TBWL, 0); mtspr(SPRN_TBWU, 0); temp = mfspr(SPRN_HID0); temp |= HID0_TBEN; mtspr(SPRN_HID0, temp); asm volatile("isync"); return 0; } define_machine(mpc86xx_hpcd) { .name = "MPC86xx HPCD", .probe = mpc86xx_hpcd_probe, .setup_arch = mpc86xx_hpcd_setup_arch, .init_IRQ = mpc86xx_hpcd_init_irq, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, .time_init = mpc86xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, .pcibios_fixup_bus = fsl_pcibios_fixup_bus, };