/* * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ * * Setup and IRQ handling code for the HD64465 companion chip. * by Greg Banks * Copyright (c) 2000 PocketPenguins Inc * * Derived from setup_hd64461.c which bore the message: * Copyright (C) 2000 YAEGASHI Takeshi */ #include #include #include #include #include #include #include #include #include #include #include static void disable_hd64465_irq(unsigned int irq) { unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); local_irq_save(flags); nimr = inw(HD64465_REG_NIMR); nimr |= mask; outw(nimr, HD64465_REG_NIMR); local_irq_restore(flags); } static void enable_hd64465_irq(unsigned int irq) { unsigned long flags; unsigned short nimr; unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); local_irq_save(flags); nimr = inw(HD64465_REG_NIMR); nimr &= ~mask; outw(nimr, HD64465_REG_NIMR); local_irq_restore(flags); } static void mask_and_ack_hd64465(unsigned int irq) { disable_hd64465_irq(irq); } static void end_hd64465_irq(unsigned int irq) { if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_hd64465_irq(irq); } static unsigned int startup_hd64465_irq(unsigned int irq) { enable_hd64465_irq(irq); return 0; } static void shutdown_hd64465_irq(unsigned int irq) { disable_hd64465_irq(irq); } static struct hw_interrupt_type hd64465_irq_type = { .typename = "HD64465-IRQ", .startup = startup_hd64465_irq, .shutdown = shutdown_hd64465_irq, .enable = enable_hd64465_irq, .disable = disable_hd64465_irq, .ack = mask_and_ack_hd64465, .end = end_hd64465_irq, }; static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) { printk(KERN_INFO "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR)); return IRQ_NONE; } /*====================================================*/ /* * Support for a secondary IRQ demux step. This is necessary * because the HD64465 presents a very thin interface to the * PCMCIA bus; a lot of features (such as remapping interrupts) * normally done in hardware by other PCMCIA host bridges is * instead done in software. */ static struct { int (*func)(int, void *); void *dev; } hd64465_demux[HD64465_IRQ_NUM]; void hd64465_register_irq_demux(int irq, int (*demux)(int irq, void *dev), void *dev) { hd64465_demux[irq - HD64465_IRQ_BASE].func = demux; hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev; } EXPORT_SYMBOL(hd64465_register_irq_demux); void hd64465_unregister_irq_demux(int irq) { hd64465_demux[irq - HD64465_IRQ_BASE].func = 0; } EXPORT_SYMBOL(hd64465_unregister_irq_demux); int hd64465_irq_demux(int irq) { if (irq == CONFIG_HD64465_IRQ) { unsigned short i, bit; unsigned short nirr = inw(HD64465_REG_NIRR); unsigned short nimr = inw(HD64465_REG_NIMR); pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr); nirr &= ~nimr; for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++) if (nirr & bit) break; if (i < HD64465_IRQ_NUM) { irq = HD64465_IRQ_BASE + i; if (hd64465_demux[i].func != 0) irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev); } } return irq; } static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL}; static int __init setup_hd64465(void) { int i; unsigned short rev; unsigned short smscr; if (!MACH_HD64465) return 0; printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n", CONFIG_HD64465_IOBASE, CONFIG_HD64465_IRQ, HD64465_IRQ_BASE, HD64465_IRQ_BASE+HD64465_IRQ_NUM-1); if (inw(HD64465_REG_SDID) != HD64465_SDID) { printk(KERN_ERR "HD64465 device ID not found, check base address\n"); } rev = inw(HD64465_REG_SRR); printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff); outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */ for (i = 0; i < HD64465_IRQ_NUM ; i++) { irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type; } setup_irq(CONFIG_HD64465_IRQ, &irq0); #ifdef CONFIG_SERIAL /* wake up the UART from STANDBY at this point */ smscr = inw(HD64465_REG_SMSCR); outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR); /* remap IO ports for first ISA serial port to HD64465 UART */ hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); #endif return 0; } module_init(setup_hd64465);