/* * Copyright 2008 Advanced Micro Devices, Inc. * Copyright 2008 Red Hat Inc. * Copyright 2009 Jerome Glisse. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: Dave Airlie * Alex Deucher * Jerome Glisse */ #include "drmP.h" #include "drm_crtc_helper.h" #include "radeon_drm.h" #include "radeon_reg.h" #include "radeon.h" #include "atom.h" #define RADEON_WAIT_IDLE_TIMEOUT 200 /** * radeon_driver_irq_handler_kms - irq handler for KMS * * @DRM_IRQ_ARGS: args * * This is the irq handler for the radeon KMS driver (all asics). * radeon_irq_process is a macro that points to the per-asic * irq handler callback. */ irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; struct radeon_device *rdev = dev->dev_private; return radeon_irq_process(rdev); } /* * Handle hotplug events outside the interrupt handler proper. */ /** * radeon_hotplug_work_func - display hotplug work handler * * @work: work struct * * This is the hot plug event work handler (all asics). * The work gets scheduled from the irq handler if there * was a hot plug interrupt. It walks the connector table * and calls the hotplug handler for each one, then sends * a drm hotplug event to alert userspace. */ static void radeon_hotplug_work_func(struct work_struct *work) { struct radeon_device *rdev = container_of(work, struct radeon_device, hotplug_work); struct drm_device *dev = rdev->ddev; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; if (mode_config->num_connector) { list_for_each_entry(connector, &mode_config->connector_list, head) radeon_connector_hotplug(connector); } /* Just fire off a uevent and let userspace tell us what to do */ drm_helper_hpd_irq_event(dev); } /** * radeon_driver_irq_preinstall_kms - drm irq preinstall callback * * @dev: drm dev pointer * * Gets the hw ready to enable irqs (all asics). * This function disables all interrupt sources on the GPU. */ void radeon_driver_irq_preinstall_kms(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; unsigned long irqflags; unsigned i; spin_lock_irqsave(&rdev->irq.lock, irqflags); /* Disable *all* interrupts */ for (i = 0; i < RADEON_NUM_RINGS; i++) atomic_set(&rdev->irq.ring_int[i], 0); rdev->irq.gui_idle = false; for (i = 0; i < RADEON_MAX_HPD_PINS; i++) rdev->irq.hpd[i] = false; for (i = 0; i < RADEON_MAX_CRTCS; i++) { rdev->irq.crtc_vblank_int[i] = false; atomic_set(&rdev->irq.pflip[i], 0); rdev->irq.afmt[i] = false; } radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); /* Clear bits */ radeon_irq_process(rdev); } /** * radeon_driver_irq_postinstall_kms - drm irq preinstall callback * * @dev: drm dev pointer * * Handles stuff to be done after enabling irqs (all asics). * Returns 0 on success. */ int radeon_driver_irq_postinstall_kms(struct drm_device *dev) { dev->max_vblank_count = 0x001fffff; return 0; } /** * radeon_driver_irq_uninstall_kms - drm irq uninstall callback * * @dev: drm dev pointer * * This function disables all interrupt sources on the GPU (all asics). */ void radeon_driver_irq_uninstall_kms(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; unsigned long irqflags; unsigned i; if (rdev == NULL) { return; } spin_lock_irqsave(&rdev->irq.lock, irqflags); /* Disable *all* interrupts */ for (i = 0; i < RADEON_NUM_RINGS; i++) atomic_set(&rdev->irq.ring_int[i], 0); rdev->irq.gui_idle = false; for (i = 0; i < RADEON_MAX_HPD_PINS; i++) rdev->irq.hpd[i] = false; for (i = 0; i < RADEON_MAX_CRTCS; i++) { rdev->irq.crtc_vblank_int[i] = false; atomic_set(&rdev->irq.pflip[i], 0); rdev->irq.afmt[i] = false; } radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } /** * radeon_msi_ok - asic specific msi checks * * @rdev: radeon device pointer * * Handles asic specific MSI checks to determine if * MSIs should be enabled on a particular chip (all asics). * Returns true if MSIs should be enabled, false if MSIs * should not be enabled. */ static bool radeon_msi_ok(struct radeon_device *rdev) { /* RV370/RV380 was first asic with MSI support */ if (rdev->family < CHIP_RV380) return false; /* MSIs don't work on AGP */ if (rdev->flags & RADEON_IS_AGP) return false; /* force MSI on */ if (radeon_msi == 1) return true; else if (radeon_msi == 0) return false; /* Quirks */ /* HP RS690 only seems to work with MSIs. */ if ((rdev->pdev->device == 0x791f) && (rdev->pdev->subsystem_vendor == 0x103c) && (rdev->pdev->subsystem_device == 0x30c2)) return true; /* Dell RS690 only seems to work with MSIs. */ if ((rdev->pdev->device == 0x791f) && (rdev->pdev->subsystem_vendor == 0x1028) && (rdev->pdev->subsystem_device == 0x01fc)) return true; /* Dell RS690 only seems to work with MSIs. */ if ((rdev->pdev->device == 0x791f) && (rdev->pdev->subsystem_vendor == 0x1028) && (rdev->pdev->subsystem_device == 0x01fd)) return true; /* RV515 seems to have MSI issues where it loses * MSI rearms occasionally. This leads to lockups and freezes. * disable it by default. */ if (rdev->family == CHIP_RV515) return false; if (rdev->flags & RADEON_IS_IGP) { /* APUs work fine with MSIs */ if (rdev->family >= CHIP_PALM) return true; /* lots of IGPs have problems with MSIs */ return false; } return true; } /** * radeon_irq_kms_init - init driver interrupt info * * @rdev: radeon device pointer * * Sets up the work irq handlers, vblank init, MSIs, etc. (all asics). * Returns 0 for success, error for failure. */ int radeon_irq_kms_init(struct radeon_device *rdev) { int r = 0; INIT_WORK(&rdev->hotplug_work, radeon_hotplug_work_func); INIT_WORK(&rdev->audio_work, r600_audio_update_hdmi); spin_lock_init(&rdev->irq.lock); r = drm_vblank_init(rdev->ddev, rdev->num_crtc); if (r) { return r; } /* enable msi */ rdev->msi_enabled = 0; if (radeon_msi_ok(rdev)) { int ret = pci_enable_msi(rdev->pdev); if (!ret) { rdev->msi_enabled = 1; dev_info(rdev->dev, "radeon: using MSI.\n"); } } rdev->irq.installed = true; r = drm_irq_install(rdev->ddev); if (r) { rdev->irq.installed = false; return r; } DRM_INFO("radeon: irq initialized.\n"); return 0; } /** * radeon_irq_kms_fini - tear down driver interrrupt info * * @rdev: radeon device pointer * * Tears down the work irq handlers, vblank handlers, MSIs, etc. (all asics). */ void radeon_irq_kms_fini(struct radeon_device *rdev) { drm_vblank_cleanup(rdev->ddev); if (rdev->irq.installed) { drm_irq_uninstall(rdev->ddev); rdev->irq.installed = false; if (rdev->msi_enabled) pci_disable_msi(rdev->pdev); } flush_work_sync(&rdev->hotplug_work); } /** * radeon_irq_kms_sw_irq_get - enable software interrupt * * @rdev: radeon device pointer * @ring: ring whose interrupt you want to enable * * Enables the software interrupt for a specific ring (all asics). * The software interrupt is generally used to signal a fence on * a particular ring. */ void radeon_irq_kms_sw_irq_get(struct radeon_device *rdev, int ring) { unsigned long irqflags; if (!rdev->ddev->irq_enabled) return; if (atomic_inc_return(&rdev->irq.ring_int[ring]) == 1) { spin_lock_irqsave(&rdev->irq.lock, irqflags); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } } /** * radeon_irq_kms_sw_irq_put - disable software interrupt * * @rdev: radeon device pointer * @ring: ring whose interrupt you want to disable * * Disables the software interrupt for a specific ring (all asics). * The software interrupt is generally used to signal a fence on * a particular ring. */ void radeon_irq_kms_sw_irq_put(struct radeon_device *rdev, int ring) { unsigned long irqflags; if (!rdev->ddev->irq_enabled) return; if (atomic_dec_and_test(&rdev->irq.ring_int[ring])) { spin_lock_irqsave(&rdev->irq.lock, irqflags); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } } /** * radeon_irq_kms_pflip_irq_get - enable pageflip interrupt * * @rdev: radeon device pointer * @crtc: crtc whose interrupt you want to enable * * Enables the pageflip interrupt for a specific crtc (all asics). * For pageflips we use the vblank interrupt source. */ void radeon_irq_kms_pflip_irq_get(struct radeon_device *rdev, int crtc) { unsigned long irqflags; if (crtc < 0 || crtc >= rdev->num_crtc) return; if (!rdev->ddev->irq_enabled) return; if (atomic_inc_return(&rdev->irq.pflip[crtc]) == 1) { spin_lock_irqsave(&rdev->irq.lock, irqflags); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } } /** * radeon_irq_kms_pflip_irq_put - disable pageflip interrupt * * @rdev: radeon device pointer * @crtc: crtc whose interrupt you want to disable * * Disables the pageflip interrupt for a specific crtc (all asics). * For pageflips we use the vblank interrupt source. */ void radeon_irq_kms_pflip_irq_put(struct radeon_device *rdev, int crtc) { unsigned long irqflags; if (crtc < 0 || crtc >= rdev->num_crtc) return; if (!rdev->ddev->irq_enabled) return; if (atomic_dec_and_test(&rdev->irq.pflip[crtc])) { spin_lock_irqsave(&rdev->irq.lock, irqflags); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } } /** * radeon_irq_kms_enable_afmt - enable audio format change interrupt * * @rdev: radeon device pointer * @block: afmt block whose interrupt you want to enable * * Enables the afmt change interrupt for a specific afmt block (all asics). */ void radeon_irq_kms_enable_afmt(struct radeon_device *rdev, int block) { unsigned long irqflags; spin_lock_irqsave(&rdev->irq.lock, irqflags); rdev->irq.afmt[block] = true; radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } /** * radeon_irq_kms_disable_afmt - disable audio format change interrupt * * @rdev: radeon device pointer * @block: afmt block whose interrupt you want to disable * * Disables the afmt change interrupt for a specific afmt block (all asics). */ void radeon_irq_kms_disable_afmt(struct radeon_device *rdev, int block) { unsigned long irqflags; spin_lock_irqsave(&rdev->irq.lock, irqflags); rdev->irq.afmt[block] = false; radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } /** * radeon_irq_kms_enable_hpd - enable hotplug detect interrupt * * @rdev: radeon device pointer * @hpd_mask: mask of hpd pins you want to enable. * * Enables the hotplug detect interrupt for a specific hpd pin (all asics). */ void radeon_irq_kms_enable_hpd(struct radeon_device *rdev, unsigned hpd_mask) { unsigned long irqflags; int i; spin_lock_irqsave(&rdev->irq.lock, irqflags); for (i = 0; i < RADEON_MAX_HPD_PINS; ++i) rdev->irq.hpd[i] |= !!(hpd_mask & (1 << i)); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } /** * radeon_irq_kms_disable_hpd - disable hotplug detect interrupt * * @rdev: radeon device pointer * @hpd_mask: mask of hpd pins you want to disable. * * Disables the hotplug detect interrupt for a specific hpd pin (all asics). */ void radeon_irq_kms_disable_hpd(struct radeon_device *rdev, unsigned hpd_mask) { unsigned long irqflags; int i; spin_lock_irqsave(&rdev->irq.lock, irqflags); for (i = 0; i < RADEON_MAX_HPD_PINS; ++i) rdev->irq.hpd[i] &= !(hpd_mask & (1 << i)); radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); } /** * radeon_irq_kms_wait_gui_idle - waits for drawing engine to be idle * * @rdev: radeon device pointer * * Enabled the GUI idle interrupt and waits for it to fire (r6xx+). * This is currently used to make sure the 3D engine is idle for power * management, but should be replaces with proper fence waits. * GUI idle interrupts don't work very well on pre-r6xx hw and it also * does not take into account other aspects of the chip that may be busy. * DO NOT USE GOING FORWARD. */ int radeon_irq_kms_wait_gui_idle(struct radeon_device *rdev) { unsigned long irqflags; int r; spin_lock_irqsave(&rdev->irq.lock, irqflags); rdev->irq.gui_idle = true; radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); r = wait_event_timeout(rdev->irq.idle_queue, radeon_gui_idle(rdev), msecs_to_jiffies(RADEON_WAIT_IDLE_TIMEOUT)); spin_lock_irqsave(&rdev->irq.lock, irqflags); rdev->irq.gui_idle = false; radeon_irq_set(rdev); spin_unlock_irqrestore(&rdev->irq.lock, irqflags); return r; }