/**************************************************************************** * Driver for Solarflare Solarstorm network controllers and boards * Copyright 2006-2008 Solarflare Communications Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation, incorporated herein by reference. */ #ifndef EFX_MDIO_10G_H #define EFX_MDIO_10G_H /* * Definitions needed for doing 10G MDIO as specified in clause 45 * MDIO, which do not appear in Linux yet. Also some helper functions. */ #include "efx.h" #include "boards.h" /* Numbering of the MDIO Manageable Devices (MMDs) */ /* Physical Medium Attachment/ Physical Medium Dependent sublayer */ #define MDIO_MMD_PMAPMD (1) /* WAN Interface Sublayer */ #define MDIO_MMD_WIS (2) /* Physical Coding Sublayer */ #define MDIO_MMD_PCS (3) /* PHY Extender Sublayer */ #define MDIO_MMD_PHYXS (4) /* Extender Sublayer */ #define MDIO_MMD_DTEXS (5) /* Transmission convergence */ #define MDIO_MMD_TC (6) /* Auto negotiation */ #define MDIO_MMD_AN (7) /* Generic register locations */ #define MDIO_MMDREG_CTRL1 (0) #define MDIO_MMDREG_STAT1 (1) #define MDIO_MMDREG_IDHI (2) #define MDIO_MMDREG_IDLOW (3) #define MDIO_MMDREG_SPEED (4) #define MDIO_MMDREG_DEVS0 (5) #define MDIO_MMDREG_DEVS1 (6) #define MDIO_MMDREG_CTRL2 (7) #define MDIO_MMDREG_STAT2 (8) #define MDIO_MMDREG_TXDIS (9) /* Bits in MMDREG_CTRL1 */ /* Reset */ #define MDIO_MMDREG_CTRL1_RESET_LBN (15) #define MDIO_MMDREG_CTRL1_RESET_WIDTH (1) /* Loopback */ /* Loopback bit for WIS, PCS, PHYSX and DTEXS */ #define MDIO_MMDREG_CTRL1_LBACK_LBN (14) #define MDIO_MMDREG_CTRL1_LBACK_WIDTH (1) /* Bits in MMDREG_STAT1 */ #define MDIO_MMDREG_STAT1_FAULT_LBN (7) #define MDIO_MMDREG_STAT1_FAULT_WIDTH (1) /* Link state */ #define MDIO_MMDREG_STAT1_LINK_LBN (2) #define MDIO_MMDREG_STAT1_LINK_WIDTH (1) /* Low power ability */ #define MDIO_MMDREG_STAT1_LPABLE_LBN (1) #define MDIO_MMDREG_STAT1_LPABLE_WIDTH (1) /* Bits in ID reg */ #define MDIO_ID_REV(_id32) (_id32 & 0xf) #define MDIO_ID_MODEL(_id32) ((_id32 >> 4) & 0x3f) #define MDIO_ID_OUI(_id32) (_id32 >> 10) /* Bits in MMDREG_DEVS0. Someone thoughtfully layed things out * so the 'bit present' bit number of an MMD is the number of * that MMD */ #define DEV_PRESENT_BIT(_b) (1 << _b) #define MDIO_MMDREG_DEVS0_PHYXS DEV_PRESENT_BIT(MDIO_MMD_PHYXS) #define MDIO_MMDREG_DEVS0_PCS DEV_PRESENT_BIT(MDIO_MMD_PCS) #define MDIO_MMDREG_DEVS0_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD) /* Bits in MMDREG_STAT2 */ #define MDIO_MMDREG_STAT2_PRESENT_VAL (2) #define MDIO_MMDREG_STAT2_PRESENT_LBN (14) #define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2) /* Bits in MMDREG_TXDIS */ #define MDIO_MMDREG_TXDIS_GLOBAL_LBN (0) #define MDIO_MMDREG_TXDIS_GLOBAL_WIDTH (1) /* MMD-specific bits, ordered by MMD, then register */ #define MDIO_PMAPMD_CTRL1_LBACK_LBN (0) #define MDIO_PMAPMD_CTRL1_LBACK_WIDTH (1) /* PMA type (4 bits) */ #define MDIO_PMAPMD_CTRL2_10G_CX4 (0x0) #define MDIO_PMAPMD_CTRL2_10G_EW (0x1) #define MDIO_PMAPMD_CTRL2_10G_LW (0x2) #define MDIO_PMAPMD_CTRL2_10G_SW (0x3) #define MDIO_PMAPMD_CTRL2_10G_LX4 (0x4) #define MDIO_PMAPMD_CTRL2_10G_ER (0x5) #define MDIO_PMAPMD_CTRL2_10G_LR (0x6) #define MDIO_PMAPMD_CTRL2_10G_SR (0x7) /* Reserved */ #define MDIO_PMAPMD_CTRL2_10G_BT (0x9) /* Reserved */ /* Reserved */ #define MDIO_PMAPMD_CTRL2_1G_BT (0xc) /* Reserved */ #define MDIO_PMAPMD_CTRL2_100_BT (0xe) #define MDIO_PMAPMD_CTRL2_10_BT (0xf) #define MDIO_PMAPMD_CTRL2_TYPE_MASK (0xf) /* PHY XGXS lane state */ #define MDIO_PHYXS_LANE_STATE (0x18) #define MDIO_PHYXS_LANE_ALIGNED_LBN (12) /* AN registers */ #define MDIO_AN_STATUS (1) #define MDIO_AN_STATUS_XNP_LBN (7) #define MDIO_AN_STATUS_PAGE_LBN (6) #define MDIO_AN_STATUS_AN_DONE_LBN (5) #define MDIO_AN_STATUS_LP_AN_CAP_LBN (0) #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ #define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */ #define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */ #define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */ #define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */ #define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9) /* LP Training Reset Request */ /* Packing of the prt and dev arguments of clause 45 style MDIO into a * single int so they can be passed into the mdio_read/write functions * that currently exist. Note that as Falcon is the only current user, * the packed form is chosen to match what Falcon needs to write into * a register. This is checked at compile-time so do not change it. If * your target chip needs things layed out differently you will need * to unpack the arguments in your chip-specific mdio functions. */ /* These are defined by the standard. */ #define MDIO45_PRT_ID_WIDTH (5) #define MDIO45_DEV_ID_WIDTH (5) /* The prt ID is just packed in immediately to the left of the dev ID */ #define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH) #define MDIO45_PRT_ID_MASK ((1 << MDIO45_PRT_DEV_WIDTH) - 1) /* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */ #define MDIO45_XPRT_ID_WIDTH (MDIO45_PRT_DEV_WIDTH + 1) #define MDIO45_XPRT_ID_MASK ((1 << MDIO45_XPRT_ID_WIDTH) - 1) #define MDIO45_XPRT_ID_IS10G (1 << (MDIO45_XPRT_ID_WIDTH - 1)) #define MDIO45_PRT_ID_COMP_LBN MDIO45_DEV_ID_WIDTH #define MDIO45_PRT_ID_COMP_WIDTH MDIO45_PRT_ID_WIDTH #define MDIO45_DEV_ID_COMP_LBN 0 #define MDIO45_DEV_ID_COMP_WIDTH MDIO45_DEV_ID_WIDTH /* Compose port and device into a phy_id */ static inline int mdio_clause45_pack(u8 prt, u8 dev) { efx_dword_t phy_id; EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt, MDIO45_DEV_ID_COMP, dev); return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id); } static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev) { efx_dword_t phy_id; EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val); *prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP); *dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP); } static inline int mdio_clause45_read(struct efx_nic *efx, u8 prt, u8 dev, u16 addr) { return efx->mii.mdio_read(efx->net_dev, mdio_clause45_pack(prt, dev), addr); } static inline void mdio_clause45_write(struct efx_nic *efx, u8 prt, u8 dev, u16 addr, int value) { efx->mii.mdio_write(efx->net_dev, mdio_clause45_pack(prt, dev), addr, value); } static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd) { int phy_id = efx->mii.phy_id; u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW); u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI); return (id_hi << 16) | (id_low); } static inline int mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx) { int i, sync, lane_status; for (i = 0; i < 2; ++i) lane_status = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PHYXS, MDIO_PHYXS_LANE_STATE); sync = (lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)) != 0; if (!sync) EFX_INFO(efx, "XGXS lane status: %x\n", lane_status); return sync; } extern const char *mdio_clause45_mmd_name(int mmd); /* * Reset a specific MMD and wait for reset to clear. * Return number of spins left (>0) on success, -%ETIMEDOUT on failure. * * This function will sleep */ extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd, int spins, int spintime); /* As mdio_clause45_check_mmd but for multiple MMDs */ int mdio_clause45_check_mmds(struct efx_nic *efx, unsigned int mmd_mask, unsigned int fatal_mask); /* Check the link status of specified mmds in bit mask */ extern int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask); /* Generic transmit disable support though PMAPMD */ extern void mdio_clause45_transmit_disable(struct efx_nic *efx); /* Generic part of reconfigure: set/clear loopback bits */ extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx); /* Read (some of) the PHY settings over MDIO */ extern void mdio_clause45_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); /* Set (some of) the PHY settings over MDIO */ extern int mdio_clause45_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); /* Wait for specified MMDs to exit reset within a timeout */ extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx, unsigned int mmd_mask); #endif /* EFX_MDIO_10G_H */