/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *****************************************************************************/ #ifndef __iwl_eeprom_h__ #define __iwl_eeprom_h__ #include struct iwl_priv; /* * EEPROM access time values: * * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. */ #define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ #define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ #define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ /* * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags. * * IBSS and/or AP operation is allowed *only* on those channels with * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because * RADAR detection is not supported by the 4965 driver, but is a * requirement for establishing a new network for legal operation on channels * requiring RADAR detection or restricting ACTIVE scanning. * * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. * It only indicates that 20 MHz channel use is supported; HT40 channel * usage is indicated by a separate set of regulatory flags for each * HT40 channel pair. * * NOTE: Using a channel inappropriately will result in a uCode error! */ #define IWL_NUM_TX_CALIB_GROUPS 5 enum { EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ /* Bit 2 Reserved */ EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ /* Bit 6 Reserved (was Narrow Channel) */ EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ }; /* SKU Capabilities */ /* 5000 and up */ #define EEPROM_SKU_CAP_BAND_POS (4) #define EEPROM_SKU_CAP_BAND_SELECTION \ (3 << EEPROM_SKU_CAP_BAND_POS) #define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) #define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) #define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) /* *regulatory* channel data format in eeprom, one for each channel. * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ struct iwl_eeprom_channel { u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __packed; enum iwl_eeprom_enhanced_txpwr_flags { IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), }; /** * iwl_eeprom_enhanced_txpwr structure * This structure presents the enhanced regulatory tx power limit layout * in eeprom image * Enhanced regulatory tx power portion of eeprom image can be broken down * into individual structures; each one is 8 bytes in size and contain the * following information * @flags: entry flags * @channel: channel number * @chain_a_max_pwr: chain a max power in 1/2 dBm * @chain_b_max_pwr: chain b max power in 1/2 dBm * @chain_c_max_pwr: chain c max power in 1/2 dBm * @delta_20_in_40: 20-in-40 deltas (hi/lo) * @mimo2_max_pwr: mimo2 max power in 1/2 dBm * @mimo3_max_pwr: mimo3 max power in 1/2 dBm * */ struct iwl_eeprom_enhanced_txpwr { u8 flags; u8 channel; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; u8 delta_20_in_40; s8 mimo2_max; s8 mimo3_max; } __packed; /* 5000 Specific */ #define EEPROM_5000_TX_POWER_VERSION (4) #define EEPROM_5000_EEPROM_VERSION (0x11A) /* 5000 and up calibration */ #define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) #define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) /* 5000 temperature */ #define EEPROM_5000_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) /* agn links */ #define EEPROM_LINK_HOST (2*0x64) #define EEPROM_LINK_GENERAL (2*0x65) #define EEPROM_LINK_REGULATORY (2*0x66) #define EEPROM_LINK_CALIBRATION (2*0x67) #define EEPROM_LINK_PROCESS_ADJST (2*0x68) #define EEPROM_LINK_OTHERS (2*0x69) #define EEPROM_LINK_TXP_LIMIT (2*0x6a) #define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) /* agn regulatory - indirect access */ #define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ #define EEPROM_REG_BAND_2_CHANNELS ((0x26)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ #define EEPROM_REG_BAND_3_CHANNELS ((0x42)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ #define EEPROM_REG_BAND_4_CHANNELS ((0x5C)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ #define EEPROM_REG_BAND_5_CHANNELS ((0x74)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ #define EEPROM_REG_BAND_24_HT40_CHANNELS ((0x82)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ #define EEPROM_REG_BAND_52_HT40_CHANNELS ((0x92)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ /* 6000 regulatory - indirect access */ #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ /* 5050 Specific */ #define EEPROM_5050_TX_POWER_VERSION (4) #define EEPROM_5050_EEPROM_VERSION (0x21E) /* 1000 Specific */ #define EEPROM_1000_TX_POWER_VERSION (4) #define EEPROM_1000_EEPROM_VERSION (0x15C) /* 6x00 Specific */ #define EEPROM_6000_TX_POWER_VERSION (4) #define EEPROM_6000_EEPROM_VERSION (0x423) /* 6x50 Specific */ #define EEPROM_6050_TX_POWER_VERSION (4) #define EEPROM_6050_EEPROM_VERSION (0x532) /* 6150 Specific */ #define EEPROM_6150_TX_POWER_VERSION (6) #define EEPROM_6150_EEPROM_VERSION (0x553) /* 6x05 Specific */ #define EEPROM_6005_TX_POWER_VERSION (6) #define EEPROM_6005_EEPROM_VERSION (0x709) /* 6x30 Specific */ #define EEPROM_6030_TX_POWER_VERSION (6) #define EEPROM_6030_EEPROM_VERSION (0x709) /* 2x00 Specific */ #define EEPROM_2000_TX_POWER_VERSION (6) #define EEPROM_2000_EEPROM_VERSION (0x805) /* 6x35 Specific */ #define EEPROM_6035_TX_POWER_VERSION (6) #define EEPROM_6035_EEPROM_VERSION (0x753) /* OTP */ /* lower blocks contain EEPROM image and calibration data */ #define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ /* high blocks contain PAPD data */ #define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */ #define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */ #define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */ #define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */ #define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */ #define OTP_MAX_LL_ITEMS_2x00 (4) /* OTP blocks for 2x00 */ /* 2.4 GHz */ extern const u8 iwl_eeprom_band_1[14]; #define ADDRESS_MSK 0x0000FFFF #define INDIRECT_TYPE_MSK 0x000F0000 #define INDIRECT_HOST 0x00010000 #define INDIRECT_GENERAL 0x00020000 #define INDIRECT_REGULATORY 0x00030000 #define INDIRECT_CALIBRATION 0x00040000 #define INDIRECT_PROCESS_ADJST 0x00050000 #define INDIRECT_OTHERS 0x00060000 #define INDIRECT_TXP_LIMIT 0x00070000 #define INDIRECT_TXP_LIMIT_SIZE 0x00080000 #define INDIRECT_ADDRESS 0x00100000 /* General */ #define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ #define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ #define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ #define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ #define EEPROM_VERSION (2*0x44) /* 2 bytes */ #define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ #define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ #define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ #define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ #define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ /* The following masks are to be applied on EEPROM_RADIO_CONFIG */ #define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ #define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ #define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ #define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ #define EEPROM_RF_CONFIG_TYPE_MAX 0x3 #define EEPROM_REGULATORY_BAND_NO_HT40 (0) struct iwl_eeprom_ops { const u32 regulatory_bands[7]; const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset); void (*update_enhanced_txpower) (struct iwl_priv *priv); }; int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev); void iwl_eeprom_free(struct iwl_priv *priv); int iwl_eeprom_check_version(struct iwl_priv *priv); int iwl_eeprom_check_sku(struct iwl_priv *priv); const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset); int iwl_init_channel_map(struct iwl_priv *priv); void iwl_free_channel_map(struct iwl_priv *priv); const struct iwl_channel_info *iwl_get_channel_info( const struct iwl_priv *priv, enum ieee80211_band band, u16 channel); #endif /* __iwl_eeprom_h__ */