/****************************************************************************** * * Copyright(c) 2009-2010 Realtek Corporation. * * Tmis program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * Tmis program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * tmis program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * Tme full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * wlanfae * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, * Hsinchu 300, Taiwan. * * Larry Finger *****************************************************************************/ #ifndef __RTL_DEBUG_H__ #define __RTL_DEBUG_H__ /*-------------------------------------------------------------- Debug level --------------------------------------------------------------*/ /* *Fatal bug. *For example, Tx/Rx/IO locked up, *memory access violation, *resource allocation failed, *unexpected HW behavior, HW BUG *and so on. */ #define DBG_EMERG 0 /* *Abnormal, rare, or unexpeted cases. *For example, Packet/IO Ctl canceled, *device suprisely unremoved and so on. */ #define DBG_WARNING 2 /* *Normal case driver developer should *open, we can see link status like *assoc/AddBA/DHCP/adapter start and *so on basic and useful infromations. */ #define DBG_DMESG 3 /* *Normal case with useful information *about current SW or HW state. *For example, Tx/Rx descriptor to fill, *Tx/Rx descriptor completed status, *SW protocol state change, dynamic *mechanism state change and so on. */ #define DBG_LOUD 4 /* *Normal case with detail execution *flow or information. */ #define DBG_TRACE 5 /*-------------------------------------------------------------- Define the rt_trace components --------------------------------------------------------------*/ #define COMP_ERR BIT(0) #define COMP_FW BIT(1) #define COMP_INIT BIT(2) /*For init/deinit */ #define COMP_RECV BIT(3) /*For Rx. */ #define COMP_SEND BIT(4) /*For Tx. */ #define COMP_MLME BIT(5) /*For MLME. */ #define COMP_SCAN BIT(6) /*For Scan. */ #define COMP_INTR BIT(7) /*For interrupt Related. */ #define COMP_LED BIT(8) /*For LED. */ #define COMP_SEC BIT(9) /*For sec. */ #define COMP_BEACON BIT(10) /*For beacon. */ #define COMP_RATE BIT(11) /*For rate. */ #define COMP_RXDESC BIT(12) /*For rx desc. */ #define COMP_DIG BIT(13) /*For DIG */ #define COMP_TXAGC BIT(14) /*For Tx power */ #define COMP_HIPWR BIT(15) /*For High Power Mechanism */ #define COMP_POWER BIT(16) /*For lps/ips/aspm. */ #define COMP_POWER_TRACKING BIT(17) /*For TX POWER TRACKING */ #define COMP_BB_POWERSAVING BIT(18) #define COMP_SWAS BIT(19) /*For SW Antenna Switch */ #define COMP_RF BIT(20) /*For RF. */ #define COMP_TURBO BIT(21) /*For EDCA TURBO. */ #define COMP_RATR BIT(22) #define COMP_CMD BIT(23) #define COMP_EFUSE BIT(24) #define COMP_QOS BIT(25) #define COMP_MAC80211 BIT(26) #define COMP_REGD BIT(27) #define COMP_CHAN BIT(28) #define COMP_USB BIT(29) /*-------------------------------------------------------------- Define the rt_print components --------------------------------------------------------------*/ /* Define EEPROM and EFUSE check module bit*/ #define EEPROM_W BIT(0) #define EFUSE_PG BIT(1) #define EFUSE_READ_ALL BIT(2) /* Define init check for module bit*/ #define INIT_EEPROM BIT(0) #define INIT_TxPower BIT(1) #define INIT_IQK BIT(2) #define INIT_RF BIT(3) /* Define PHY-BB/RF/MAC check module bit */ #define PHY_BBR BIT(0) #define PHY_BBW BIT(1) #define PHY_RFR BIT(2) #define PHY_RFW BIT(3) #define PHY_MACR BIT(4) #define PHY_MACW BIT(5) #define PHY_ALLR BIT(6) #define PHY_ALLW BIT(7) #define PHY_TXPWR BIT(8) #define PHY_PWRDIFF BIT(9) enum dbgp_flag_e { FQOS = 0, FTX = 1, FRX = 2, FSEC = 3, FMGNT = 4, FMLME = 5, FRESOURCE = 6, FBEACON = 7, FISR = 8, FPHY = 9, FMP = 10, FEEPROM = 11, FPWR = 12, FDM = 13, FDBGCtrl = 14, FC2H = 15, FBT = 16, FINIT = 17, FIOCTL = 18, DBGP_TYPE_MAX }; #define RT_ASSERT(_exp, fmt) \ do { \ if (!(_exp)) { \ printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \ __func__); \ printk fmt; \ } \ } while (0); #define RT_TRACE(rtlpriv, comp, level, fmt)\ do { \ if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \ ((level) <= rtlpriv->dbg.global_debuglevel))) {\ printk(KERN_DEBUG "%s:%s():<%lx-%x> ", KBUILD_MODNAME, \ __func__, in_interrupt(), in_atomic()); \ printk fmt; \ } \ } while (0); #define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr) \ do { \ if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \ printk(KERN_DEBUG "%s: ", KBUILD_MODNAME); \ printk printstr; \ } \ } while (0); #define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \ _hexdatalen) \ do {\ if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) &&\ (_level <= rtlpriv->dbg.global_debuglevel))) { \ int __i; \ u8* ptr = (u8 *)_hexdata; \ printk(KERN_DEBUG "%s: ", KBUILD_MODNAME); \ printk("In process \"%s\" (pid %i):", current->comm,\ current->pid); \ printk(_titlestring); \ for (__i = 0; __i < (int)_hexdatalen; __i++) { \ printk("%02X%s", ptr[__i], (((__i + 1) % 4)\ == 0) ? " " : " ");\ if (((__i + 1) % 16) == 0) \ printk("\n"); \ } \ printk(KERN_DEBUG "\n"); \ } \ } while (0); #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" #define MAC_ARG(x) \ ((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2],\ ((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5] void rtl_dbgp_flag_init(struct ieee80211_hw *hw); #endif