#include #include #include #include #define SCI_MAJOR 204 #define SCI_MINOR_START 8 /* * SCI register subset common for all port types. * Not all registers will exist on all parts. */ enum { SCSMR, /* Serial Mode Register */ SCBRR, /* Bit Rate Register */ SCSCR, /* Serial Control Register */ SCxSR, /* Serial Status Register */ SCFCR, /* FIFO Control Register */ SCFDR, /* FIFO Data Count Register */ SCxTDR, /* Transmit (FIFO) Data Register */ SCxRDR, /* Receive (FIFO) Data Register */ SCLSR, /* Line Status Register */ SCTFDR, /* Transmit FIFO Data Count Register */ SCRFDR, /* Receive FIFO Data Count Register */ SCSPTR, /* Serial Port Register */ HSSRR, /* Sampling Rate Register */ SCPCR, /* Serial Port Control Register */ SCPDR, /* Serial Port Data Register */ SCIx_NR_REGS, }; /* SCSMR (Serial Mode Register) */ #define SCSMR_CHR BIT(6) /* 7-bit Character Length */ #define SCSMR_PE BIT(5) /* Parity Enable */ #define SCSMR_ODD BIT(4) /* Odd Parity */ #define SCSMR_STOP BIT(3) /* Stop Bit Length */ #define SCSMR_CKS 0x0003 /* Clock Select */ /* Serial Control Register, SCIFA/SCIFB only bits */ #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ /* SCxSR (Serial Status Register) on SCI */ #define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ #define SCI_RDRF BIT(6) /* Receive Data Register Full */ #define SCI_ORER BIT(5) /* Overrun Error */ #define SCI_FER BIT(4) /* Framing Error */ #define SCI_PER BIT(3) /* Parity Error */ #define SCI_TEND BIT(2) /* Transmit End */ #define SCI_RESERVED 0x03 /* All reserved bits */ #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) #define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) #define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) #define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) #define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ #define SCIF_ER BIT(7) /* Receive Error */ #define SCIF_TEND BIT(6) /* Transmission End */ #define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ #define SCIF_BRK BIT(4) /* Break Detect */ #define SCIF_FER BIT(3) /* Framing Error */ #define SCIF_PER BIT(2) /* Parity Error */ #define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ #define SCIF_DR BIT(0) /* Receive Data Ready */ /* SCIF only (optional) */ #define SCIF_PERC 0xf000 /* Number of Parity Errors */ #define SCIF_FERC 0x0f00 /* Number of Framing Errors */ /*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ #define SCIFA_ORER BIT(9) /* Overrun Error */ #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) #define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) #define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) #define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) #define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) /* SCFCR (FIFO Control Register) */ #define SCFCR_MCE BIT(3) /* Modem Control Enable */ #define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ #define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ #define SCFCR_LOOP BIT(0) /* Loopback Test */ /* SCLSR (Line Status Register) on (H)SCIF */ #define SCLSR_ORER BIT(0) /* Overrun Error */ /* SCSPTR (Serial Port Register), optional */ #define SCSPTR_RTSIO BIT(7) /* Serial Port RTS Pin Input/Output */ #define SCSPTR_RTSDT BIT(6) /* Serial Port RTS Pin Data */ #define SCSPTR_CTSIO BIT(5) /* Serial Port CTS Pin Input/Output */ #define SCSPTR_CTSDT BIT(4) /* Serial Port CTS Pin Data */ #define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ #define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ /* HSSRR HSCIF */ #define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ #define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */ #define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */ /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ #define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ #define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) #define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) #define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask) #define SCxSR_RDxF_CLEAR(port) \ (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) #define SCxSR_ERROR_CLEAR(port) \ (to_sci_port(port)->error_clear) #define SCxSR_TDxE_CLEAR(port) \ (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) #define SCxSR_BREAK_CLEAR(port) \ (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)