config SND_SOC_TEGRA tristate "SoC Audio for the Tegra System-on-Chip" depends on ARCH_TEGRA && TEGRA20_APB_DMA select REGMAP_MMIO select SND_SOC_DMAENGINE_PCM if TEGRA20_APB_DMA help Say Y or M here if you want support for SoC audio on Tegra. config SND_SOC_TEGRA_OFFLOAD tristate "Audio offload support for Tegra SoC" depends on SND_SOC_TEGRA help Say Y or M here if you want support for offload audio on Tegra. When offload support is enabled offload platform is used and it sends both PCM and compressed data to AVP/DSP for decode and rendering. config SND_SOC_TEGRA20_DAS tristate depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC help Say Y or M if you want to add support for the Tegra20 DAS module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_I2S tristate depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the Tegra20 I2S interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_AHUB tristate "Tegra 30 Audio Hub driver" depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC config SND_SOC_TEGRA30_DAM tristate "Tegra 30 Audio Dam driver" depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB config SND_SOC_TEGRA_DMIC tristate "Tegra DMic driver" depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for DMIC platform driver for dummy DMIC codec interfaces. config SND_SOC_TEGRA30_I2S tristate "Tegra 30 I2S driver" depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the Tegra I2S interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_SPDIF tristate depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && TEGRA_DC default m help Say Y or M if you want to add support for the TEGRA20 SPDIF interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_SPDIF tristate depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC && TEGRA_DC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for the TEGRA30 SPDIF interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_AHUB tristate depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC help Say Y or M if you want to add support for the Tegra30 AHUB module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_DAM tristate depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for the Tegra30 DAM module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_I2S tristate depends on SND_SOC_TEGRA && !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the Tegra30 I2S interface. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_AVP tristate depends on SND_SOC_TEGRA select SND_SOC_TEGRA_OFFLOAD help Say Y or M if you want to add support for the Tegra30 AVP rendering module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8753 help Say Y or M here if you want to add support for SoC audio on Tegra boards using the WM8753 codec, such as Whistler. config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA20_SPDIF if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_WM8903 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the WM8093 codec. Currently, the supported boards are Harmony, Ventana, Seaboard, Kaen, and Aebl. config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" depends on SND_SOC_TEGRA && I2C select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC23 help Say Y or M here if you want to add support for SoC audio on the TrimSlice platform. config SND_SOC_TEGRA_ALC5632 tristate "SoC Audio support for Tegra boards using an ALC5632 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA_I2S select SND_SOC_ALC5632 help Say Y or M here if you want to add support for SoC audio on the Toshiba AC100 netbook. config SND_SOC_TEGRA_P1852 tristate "SoC Audio support for P1852 SKUs" depends on SND_SOC_TEGRA depends on MACH_P1852 select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on the TEGRA P1852 SKUs. These are plug-n-play boards and and the codecs used by the system integrator needs to be provided while instantiating the driver. config SND_SOC_TEGRA_E1853 tristate "SoC Audio support for E1853 SKUs" depends on SND_SOC_TEGRA depends on MACH_E1853 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_TEGRA30_SPDIF if ARCH_TEGRA_3x_SOC select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if ARCH_TEGRA_3x_SOC select SND_SOC_WM8731 select SND_SOC_AD193X help Say Y or M here if you want to add support for SoC audio on the TEGRA E1853 SKUs. These are plug-n-play boards and and the codecs used by the system integrator needs to be provided while instantiating the driver. config SND_SOC_TEGRA_M2601 tristate "SoC Audio support for M2601 SKUs" depends on SND_SOC_TEGRA depends on MACH_M2601 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_AD193X help Say Y or M here if you want to add support for SoC audio on the TEGRA M2601 SKUs. These are plug-n-play boards and and the codecs used by the system integrator needs to be provided while instantiating the driver. config MACH_HAS_SND_SOC_TEGRA_WM8753 bool help Machines that use the SND_SOC_TEGRA_WM8753 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_WM8753. config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA20_SPDIF if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_WM8753 select SND_SOC_SPDIF help Say Y or M here if you want to add support for SoC audio on Tegra boards using the WM8753 codec. Currently, only supported board is Whistler. config SND_SOC_TEGRA_MAX98088 tristate "SoC Audio support for Tegra boards using a MAX98088 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_MAX98088 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98088 codec. Currently, only supported board is Enterprise. config SND_SOC_TEGRA_TLV320AIC326X tristate "SoC Audio support for Tegra boards using a TI AIC326x codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC326X select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the TI AIC326X codec. config MACH_HAS_SND_SOC_TEGRA_TLV320AIC325X bool help Machines that use the SND_SOC_TEGRA_TLV320AIC325X driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_TLV320AIC325X. config SND_SOC_TEGRA_TLV320AIC325X tristate "SoC Audio support for Tegra boards using a TI AIC325x codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_TLV320AIC325X select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC325X select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC select SND_SOC_SPDIF select MFD_AIC3256_I2C help Say Y or M here if you want to add support for SoC audio on Tegra boards using the TI AIC325X codec. config MACH_HAS_SND_SOC_TEGRA_RT5639 bool help Machines that use the SND_SOC_TEGRA_RT5639 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_RT5639. config SND_SOC_TEGRA_RT5639 tristate "SoC Audio support for Tegra boards using a ALC5639 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on SND_SOC_TEGRA_RT5640 select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_RT5639 select SND_SOC_SPDIF select SND_SOC_TEGRA30_AVP if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the ALC5639 codec. Currently, the supported board is Kai and Ardbeg. config SND_SOC_TEGRA_APALIS_TK1 tristate "SoC Audio support for Apalis TK1 module" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_SGTL5000 select SND_SOC_SPDIF select SND_SOC_TEGRA30_AVP if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on the Toradex Apalis TK1 module. config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using a ALC5640 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_RT5640 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AVP if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the ALC5640 codec. Currently, the supported boards are Kai,Cardhu and Dalmore. config MACH_HAS_SND_SOC_TEGRA_RT5645 bool help Machines that use the SND_SOC_TEGRA_RT5645 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_RT5645. config SND_SOC_TEGRA_RT5645 tristate "SoC Audio support for Tegra boards using a ALC5645 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_RT5645 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the ALC5645 codec. Currently, the supported boards are Ardbeg. config SND_SOC_TEGRA_MAX98095 tristate "SoC Audio support for Tegra boards using a MAX98095 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_MAX98095 select SND_SOC_SPDIF select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98095 codec. Currently, only supported board is Cardhu. config SND_SOC_TEGRA_CS42L73 tristate "SoC Audio support for Tegra boards using a CS42L73 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_CS42L73 select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the CS42L73 codec. Currently, only supported board is Pluto. config MACH_HAS_SND_SOC_TEGRA_MAX98090 bool help Machines that use the SND_SOC_TEGRA_MAX98090 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_MAX98090. config SND_SOC_TEGRA_MAX98090 tristate "SoC Audio support for Tegra boards using a MAX98090 codec" depends on SND_SOC_TEGRA && I2C && TEGRA_DC depends on MACH_HAS_SND_SOC_TEGRA_MAX98090 select SND_SOC_TEGRA30_I2S if !ARCH_TEGRA_2x_SOC select SND_SOC_MAX98090 select SND_SOC_TEGRA30_DAM if !ARCH_TEGRA_2x_SOC select SND_SOC_MAX97236 select SND_SOC_SPDIF select SND_SOC_TEGRA30_AVP if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98090 codec. Currently, only supported board is Pluto. config MACH_HAS_SND_SOC_TEGRA_DMIC_REV1 bool help Machines that use the SND_SOC_TEGRA_DMIC_REV1 driver should select this config option, in order to allow the user to enable SND_SOC_TEGRA_DMIC_REV1. config SND_SOC_TEGRA_DMIC_REV1 tristate "SoC Audio support for Tegra boards using a DMIC_REV1 codec" depends on SND_SOC_TEGRA depends on MACH_HAS_SND_SOC_TEGRA_DMIC_REV1 select SND_SOC_DMIC select SND_SOC_TEGRA_DMIC if !ARCH_TEGRA_2x_SOC select SND_SOC_TEGRA30_AHUB if !ARCH_TEGRA_2x_SOC help Say Y or M here if you want to add support for SoC audio on Tegra boards using the DMIC_REV1 codec. Currently, only supported board is E1664 (dolak). config SND_SOC_TEGRA_DUMMY tristate "SoC Audio support for Tegra boards that doesn't use codecs" depends on SND_SOC_TEGRA select SND_SOC_TEGRA30_SPDIF if !ARCH_TEGRA_2x_SOC select SND_SOC_SPDIF help Say Y or M here if you want to add support for SoC audio on Tegra boards that doesn't use codecs (like SPDIF). One such board is a customer board called Sandman.