summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/arm/atmel-at91.txt
blob: 16f60b41c14722893584faf3e60148e2edb56f39 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
Atmel AT91 device tree bindings.
================================

PIT Timer required properties:
- compatible: Should be "atmel,at91sam9260-pit"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the PIT which is the IRQ line
  shared across all System Controller members.

System Timer (ST) required properties:
- compatible: Should be "atmel,at91rm9200-st"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
  shared across all System Controller members.

TC/TCLIB Timer required properties:
- compatible: Should be "atmel,<chip>-tcb".
  <chip> can be "at91rm9200" or "at91sam9x5"
- reg: Should contain registers location and length
- interrupts: Should contain all interrupts for the TC block
  Note that you can specify several interrupt cells if the TC
  block has one interrupt per channel.
- clock-names: tuple listing input clock names.
	Required elements: "t0_clk"
	Optional elements: "t1_clk", "t2_clk"
- clocks: phandles to input clocks.

Examples:

One interrupt per TC block:
	tcb0: timer@fff7c000 {
		compatible = "atmel,at91rm9200-tcb";
		reg = <0xfff7c000 0x100>;
		interrupts = <18 4>;
		clocks = <&tcb0_clk>;
		clock-names = "t0_clk";
	};

One interrupt per TC channel in a TC block:
	tcb1: timer@fffdc000 {
		compatible = "atmel,at91rm9200-tcb";
		reg = <0xfffdc000 0x100>;
		interrupts = <26 4 27 4 28 4>;
		clocks = <&tcb1_clk>;
		clock-names = "t0_clk";
	};

RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
  <chip> can be "at91sam9260" or "at91sam9g45"
- reg: Should contain registers location and length

Example:

	rstc@fffffd00 {
		compatible = "atmel,at91sam9260-rstc";
		reg = <0xfffffd00 0x10>;
	};

RAMC SDRAM/DDR Controller required properties:
- compatible: Should be "atmel,at91rm9200-sdramc",
			"atmel,at91sam9260-sdramc",
			"atmel,at91sam9g45-ddramc",
- reg: Should contain registers location and length
  For at91sam9263 and at91sam9g45 you must specify 2 entries.

Examples:

	ramc0: ramc@ffffe800 {
		compatible = "atmel,at91sam9g45-ddramc";
		reg = <0xffffe800 0x200>;
	};

	ramc0: ramc@ffffe400 {
		compatible = "atmel,at91sam9g45-ddramc";
		reg = <0xffffe400 0x200
		       0xffffe600 0x200>;
	};

SHDWC Shutdown Controller

required properties:
- compatible: Should be "atmel,<chip>-shdwc".
  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length

optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
  Supported values are: "none", "high", "low", "any".
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).

optional at91sam9260 properties:
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.

optional at91sam9rl properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.

optional at91sam9x5 properties:
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.

Example:

	rstc@fffffd00 {
		compatible = "atmel,at91sam9260-rstc";
		reg = <0xfffffd00 0x10>;
	};