summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
blob: c549924603d2691e5e7ceac14517c41cbf922165 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
STMPE Touchscreen
----------------

Required properties:
 - compatible: "st,stmpe-ts"

Optional properties:
- st,ave-ctrl		: Sample average control
				0 -> 1 sample
				1 -> 2 samples
				2 -> 4 samples
				3 -> 8 samples
- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
				0 -> 10 us
				1 -> 50 us
				2 -> 100 us
				3 -> 500 us
				4 -> 1 ms
				5 -> 5 ms
				6 -> 10 ms
				7 -> 50 ms
- st,settling		: Panel driver settling time (recommended is 2)
				0 -> 10 us
				1 -> 100 us
				2 -> 500 us
				3 -> 1 ms
				4 -> 5 ms
				5 -> 10 ms
				6 -> 50 ms
				7 -> 100 ms
- st,fraction-z		: Length of the fractional part in z (recommended is 7)
			  (fraction-z ([0..7]) = Count of the fractional part)
- st,i-drive		: current limit value of the touchscreen drivers
				0 -> 20 mA (typical 35mA max)
				1 -> 50 mA (typical 80 mA max)

Optional properties common with MFD (deprecated):
 - st,sample-time	: ADC conversion time in number of clock.
				0 -> 36 clocks
				1 -> 44 clocks
				2 -> 56 clocks
				3 -> 64 clocks
				4 -> 80 clocks (recommended)
				5 -> 96 clocks
				6 -> 124 clocks
 - st,mod-12b		: ADC Bit mode
				0 -> 10bit ADC
				1 -> 12bit ADC
 - st,ref-sel		: ADC reference source
				0 -> internal
				1 -> external
 - st,adc-freq		: ADC Clock speed
				0 -> 1.625 MHz
				1 -> 3.25 MHz
				2 || 3 -> 6.5 MHz

Node name must be stmpe_touchscreen and should be child node of stmpe node to
which it belongs.

Note that common ADC settings of stmpe_touchscreen (child) will take precedence
over the settings done in MFD.

Example:

stmpe811@41 {
	compatible = "st,stmpe811";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_touch_int>;
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x41>;
	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
	interrupt-parent = <&gpio4>;
	interrupt-controller;
	id = <0>;
	blocks = <0x5>;
	irq-trigger = <0x1>;
	/* Common ADC settings */
	/* 3.25 MHz ADC clock speed */
	st,adc-freq = <1>;
	/* 12-bit ADC */
	st,mod-12b = <1>;
	/* internal ADC reference */
	st,ref-sel = <0>;
	/* ADC converstion time: 80 clocks */
	st,sample-time = <4>;

	stmpe_touchscreen {
		compatible = "st,stmpe-ts";
		reg = <0>;
		/* 8 sample average control */
		st,ave-ctrl = <3>;
		/* 5 ms touch detect interrupt delay */
		st,touch-det-delay = <5>;
		/* 1 ms panel driver settling time */
		st,settling = <3>;
		/* 7 length fractional part in z */
		st,fraction-z = <7>;
		/*
		 * 50 mA typical 80 mA max touchscreen drivers
		 * current limit value
		 */
		st,i-drive = <1>;
	};
	stmpe_adc {
		compatible = "st,stmpe-adc";
		st,norequest-mask = <0x0F>;
	};
};