1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/*
* Copyright 2018 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
/ {
chosen {
bootargs = "console=ttymxc0,115200";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
power {
label = "Wake-Up";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
gpio-key,wakeup;
};
};
extcon_usbc_det: usbc_det {
compatible = "linux,extcon-usb-gpio";
debounce = <25>;
id-gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_usbc_det>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbh_vbus: regulator-usbh-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh_reg>;
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
&adc1 {
status = "okay";
};
&pxp {
status = "okay";
};
&ecspi1 {
status = "okay";
fsl,spi-num-chipselects = <2>;
/* Note: the gpio4 28 is muxed with pinctrl_gpio4 group, controlled
* by iomuxc.
*/
cs-gpios = <
&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM_86 LCD_DATA21 */
&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM_65 CSI_DATA07 */
>;
spidev1: spidev@1 {
compatible = "toradex,evalspi";
reg = <1>;
spi-max-frequency = <23000000>;
status = "okay";
};
};
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
/* M41T0M6 real time clock on carrier board */
rtc: m41t0m6@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
};
/* ATMEL TS connector */
&atmel_mxt_ts {
status = "okay";
};
/* PWM <A> */
&pwm4 {
status = "okay";
};
/* PWM <B> */
&pwm5 {
status = "okay";
};
/* PWM <C> */
&pwm6 {
status = "okay";
};
/* PWM <D> */
&pwm7 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbotg1 {
extcon = <&extcon_usbc_det &extcon_usbc_det>;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
&usbotg2 {
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
/* The define SD_1_8 allows to use the SD interface at a higher speed mode
* if the card supports it. For this the signaling voltage is switched from
* 3.3V to 1.8V under the usdhc1's drivers control.
*/
/* #define SD_1_8 */
&usdhc1 {
#ifdef SD_1_8
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
vqmmc-supply = <®_sd1_vqmmc>;
#else
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
no-1-8-v;
#endif
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
disable-wp;
enable-sdio-wakeup;
keep-power-in-suspend;
status = "okay";
vmmc-supply = <®_3v3>;
};
|
