path: root/arch/arm/mach-mx6/bus_freq.c

/*
 * Copyright (C) 2011-2012 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.

 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

/*!
 * @file bus_freq.c
 *
 * @brief A common API for the Freescale Semiconductor i.MXC CPUfreq module
 * and DVFS CORE module.
 *
 * The APIs are for setting bus frequency to low or high.
 *
 * @ingroup PM
 */
#include <asm/io.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/mutex.h>
#include <mach/iram.h>
#include <mach/hardware.h>
#include <mach/clock.h>
#include <mach/mxc_dvfs.h>
#include <mach/sdram_autogating.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/tlb.h>
#include "crm_regs.h"
#include <linux/suspend.h>

#define LPAPM_CLK		24000000
#define DDR_MED_CLK		400000000
#define DDR3_NORMAL_CLK		528000000
#define GPC_PGC_GPU_PGCR_OFFSET	0x260
#define GPC_CNTR_OFFSET		0x0

DEFINE_SPINLOCK(ddr_freq_lock);

int low_bus_freq_mode;
int audio_bus_freq_mode;
int high_bus_freq_mode;
int med_bus_freq_mode;

int bus_freq_scaling_initialized;
static struct device *busfreq_dev;
static int busfreq_suspended;

/* True if bus_frequency is scaled not using DVFS-PER */
int bus_freq_scaling_is_active;

int lp_high_freq;
int lp_med_freq;
int lp_audio_freq;
unsigned int ddr_low_rate;
unsigned int ddr_med_rate;
unsigned int ddr_normal_rate;

int low_freq_bus_used(void);
void set_ddr_freq(int ddr_freq);

extern int init_mmdc_settings(void);
extern struct cpu_op *(*get_cpu_op)(int *op);
extern int update_ddr_freq(int ddr_rate);
extern int chip_rev;
extern bool arm_mem_clked_in_wait;

DEFINE_MUTEX(bus_freq_mutex);

struct timeval start_time;
struct timeval end_time;

static int cpu_op_nr;
static struct cpu_op *cpu_op_tbl;
static struct clk *pll2_400;
static struct clk *axi_clk;
static struct clk *ahb_clk;
static struct clk *periph_clk;
static struct clk *osc_clk;
static struct clk *cpu_clk;
static struct clk *pll3;
static struct clk *pll2;
static struct clk *pll3_sw_clk;
static struct clk *pll2_200;
static struct clk *mmdc_ch0_axi;
struct regulator *vddsoc_cap_regulator;

static struct delayed_work low_bus_freq_handler;

static void reduce_bus_freq_handler(struct work_struct *work)
{
	int ret;

	mutex_lock(&bus_freq_mutex);
	if (low_bus_freq_mode || !low_freq_bus_used()) {
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if (audio_bus_freq_mode && lp_audio_freq) {
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if (!cpu_is_mx6sl()) {
		clk_enable(pll3);
		if (lp_audio_freq) {
			/* Need to ensure that PLL2_PFD_400M is kept ON. */
			clk_enable(pll2_400);
			update_ddr_freq(50000000);
			/* Make sure periph clk's parent also got updated */
			clk_set_parent(periph_clk, pll2_200);
			audio_bus_freq_mode = 1;
			low_bus_freq_mode = 0;
		} else {
			update_ddr_freq(24000000);
			/* Make sure periph clk's parent also got updated */
			clk_set_parent(periph_clk, osc_clk);
			if (audio_bus_freq_mode)
				clk_disable(pll2_400);
			low_bus_freq_mode = 1;
			audio_bus_freq_mode = 0;
		}

		if (med_bus_freq_mode)
			clk_disable(pll2_400);

		clk_disable(pll3);
		med_bus_freq_mode = 0;
	} else {
		/* Set VDDSOC_CAP to 1.1V */
		ret = regulator_set_voltage(vddsoc_cap_regulator, 1100000,
					    1100000);
		if (ret < 0) {
			printk(KERN_DEBUG
			       "COULD NOT DECREASE VDDSOC_CAP VOLTAGE!!!!\n");
			return;
		}

		udelay(150);

		arm_mem_clked_in_wait = true;

		/* Set periph_clk to be sourced from OSC_CLK */
		/* Set MMDC clk to 25MHz. */
		/* First need to set the divider before changing the parent */
		/* if parent clock is larger than previous one */
		clk_set_rate(mmdc_ch0_axi, clk_get_rate(mmdc_ch0_axi) / 2);
		clk_set_parent(mmdc_ch0_axi, pll3_sw_clk);
		clk_set_parent(mmdc_ch0_axi, pll2_200);
		clk_set_rate(mmdc_ch0_axi,
			     clk_round_rate(mmdc_ch0_axi, LPAPM_CLK));

		/* Set AXI to 24MHz. */
		clk_set_parent(periph_clk, osc_clk);
		clk_set_rate(axi_clk, clk_round_rate(axi_clk, LPAPM_CLK));
		/* Set AHB to 24MHz. */
		clk_set_rate(ahb_clk, clk_round_rate(ahb_clk, LPAPM_CLK));

		low_bus_freq_mode = 1;
		audio_bus_freq_mode = 0;
	}

	high_bus_freq_mode = 0;
	med_bus_freq_mode = 0;
	mutex_unlock(&bus_freq_mutex);
}
/* Set the DDR, AHB to 24MHz.
  * This mode will be activated only when none of the modules that
  * need a higher DDR or AHB frequency are active.
  */
int set_low_bus_freq(void)
{
	if (busfreq_suspended)
		return 0;

	if (!bus_freq_scaling_initialized || !bus_freq_scaling_is_active)
		return 0;

	/* Don't lower the frequency immediately. Instead scheduled a delayed
	  * work and drop the freq if the conditions still remain the same.
	  */
	schedule_delayed_work(&low_bus_freq_handler, usecs_to_jiffies(3000000));
	return 0;
}

/* Set the DDR to either 528MHz or 400MHz for MX6q
 * or 400MHz for MX6DL.
 */
int set_high_bus_freq(int high_bus_freq)
{
	int ret;

	if (bus_freq_scaling_initialized && bus_freq_scaling_is_active)
		cancel_delayed_work_sync(&low_bus_freq_handler);
	mutex_lock(&bus_freq_mutex);
	if (busfreq_suspended) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}

	if (!bus_freq_scaling_initialized || !bus_freq_scaling_is_active) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}

	if (high_bus_freq_mode && high_bus_freq) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}

	if (med_bus_freq_mode && !high_bus_freq) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}

	if (cpu_is_mx6dl() && high_bus_freq)
		high_bus_freq = 0;

	if (cpu_is_mx6dl() && med_bus_freq_mode) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}
	if ((high_bus_freq_mode && (high_bus_freq || lp_high_freq)) ||
	    (med_bus_freq_mode && !high_bus_freq && lp_med_freq &&
	     !lp_high_freq)) {
		mutex_unlock(&bus_freq_mutex);
		return 0;
	}
	if (cpu_is_mx6sl()) {
		/* Set the voltage of VDDSOC to 1.2V as in normal mode. */
		ret = regulator_set_voltage(vddsoc_cap_regulator, 1200000,
					    1200000);
		if (ret < 0) {
			printk(KERN_DEBUG
			       "COULD NOT INCREASE VDDSOC_CAP VOLTAGE!!!!\n");
			return ret;
		}

		/* Need to wait for the regulator to come back up */
		/*
		 * Delay time is based on the number of 24MHz clock cycles
		 * programmed in the ANA_MISC2_BASE_ADDR for each
		 * 25mV step.
		 */
		udelay(150);

		/* Set periph_clk to be sourced from pll2_pfd2_400M */
		/* First need to set the divider before changing the */
		/* parent if parent clock is larger than previous one */
		clk_set_rate(ahb_clk, clk_round_rate(ahb_clk,
						     LPAPM_CLK / 3));
		clk_set_rate(axi_clk,
			     clk_round_rate(axi_clk, LPAPM_CLK / 2));
		clk_set_parent(periph_clk, pll2_400);

		/* Set mmdc_clk_root to be sourced */
		/* from pll2_pfd2_400M */
		clk_set_rate(mmdc_ch0_axi,
		     clk_round_rate(mmdc_ch0_axi, LPAPM_CLK / 2));
		clk_set_parent(mmdc_ch0_axi, pll3_sw_clk);
		clk_set_parent(mmdc_ch0_axi, pll2_400);
		clk_set_rate(mmdc_ch0_axi,
		     clk_round_rate(mmdc_ch0_axi, DDR_MED_CLK));

		high_bus_freq_mode = 1;
		med_bus_freq_mode = 0;
	} else {
		clk_enable(pll3);
		if (high_bus_freq) {
			update_ddr_freq(ddr_normal_rate);
			/* Make sure periph clk's parent also got updated */
			clk_set_parent(periph_clk, pll2);
			if (med_bus_freq_mode)
				clk_disable(pll2_400);
			high_bus_freq_mode = 1;
			med_bus_freq_mode = 0;
		} else {
			clk_enable(pll2_400);
			update_ddr_freq(ddr_med_rate);
			/* Make sure periph clk's parent also got updated */
			clk_set_parent(periph_clk, pll2_400);
			high_bus_freq_mode = 0;
			med_bus_freq_mode = 1;
		}
		if (audio_bus_freq_mode)
			clk_disable(pll2_400);

		clk_disable(pll3);
	}

	low_bus_freq_mode = 0;
	audio_bus_freq_mode = 0;

	/* Ensure that WAIT mode can be entered in high bus freq mode. */

	if (cpu_is_mx6sl())
		arm_mem_clked_in_wait = false;

	mutex_unlock(&bus_freq_mutex);
	return 0;
}

int low_freq_bus_used(void)
{
	if (!bus_freq_scaling_initialized)
		return 0;

	/* We only go the lowest setpoint if ARM is also
	 * at the lowest setpoint.
	 */
	if ((clk_get_rate(cpu_clk) >
			cpu_op_tbl[cpu_op_nr - 1].cpu_rate)
		|| (cpu_op_nr == 1)) {
		return 0;
	}

	if ((lp_high_freq == 0)
	    && (lp_med_freq == 0))
		return 1;
	else
		return 0;
}

void bus_freq_update(struct clk *clk, bool flag)
{
	mutex_lock(&bus_freq_mutex);
	if (flag) {
		/* Update count */
		if (clk->flags & AHB_HIGH_SET_POINT)
			lp_high_freq++;
		else if (clk->flags & AHB_MED_SET_POINT)
			lp_med_freq++;
		else if (clk->flags & AHB_AUDIO_SET_POINT)
			lp_audio_freq++;
		/* Update bus freq */
		if ((clk->flags & CPU_FREQ_TRIG_UPDATE)
			&& (clk_get_usecount(clk) == 0)) {
			if (!(clk->flags &
				(AHB_HIGH_SET_POINT | AHB_MED_SET_POINT)))  {
			if (low_freq_bus_used()) {
				if ((clk->flags & AHB_AUDIO_SET_POINT) & !audio_bus_freq_mode)
					set_low_bus_freq();
				else if (!low_bus_freq_mode)
					set_low_bus_freq();
			}
		} else {
			if ((clk->flags & AHB_MED_SET_POINT)
				&& !med_bus_freq_mode) {
				/* Set to Medium setpoint */
				mutex_unlock(&bus_freq_mutex);
				set_high_bus_freq(0);
				return;
			}
			else if ((clk->flags & AHB_HIGH_SET_POINT)
				&& !high_bus_freq_mode) {
				/* Currently at low or medium set point,
				* need to set to high setpoint
				*/
				mutex_unlock(&bus_freq_mutex);
				set_high_bus_freq(1);
				return;
			}
			}
		}
	} else {
		/* Update count */
		if (clk->flags & AHB_HIGH_SET_POINT)
			lp_high_freq--;
		else if (clk->flags & AHB_MED_SET_POINT)
			lp_med_freq--;
		else if (clk->flags & AHB_AUDIO_SET_POINT)
			lp_audio_freq--;
		/* Update bus freq */
		if ((clk->flags & CPU_FREQ_TRIG_UPDATE)
			&& (clk_get_usecount(clk) == 0)) {
			if (low_freq_bus_used() && !low_bus_freq_mode)
				set_low_bus_freq();
			else {
				/* Set to either high or medium setpoint. */
				mutex_unlock(&bus_freq_mutex);
				set_high_bus_freq(0);
				return;
			}
		}
	}
	mutex_unlock(&bus_freq_mutex);
	return;
}
void setup_pll(void)
{
}

static ssize_t bus_freq_scaling_enable_show(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	if (bus_freq_scaling_is_active)
		return sprintf(buf, "Bus frequency scaling is enabled\n");
	else
		return sprintf(buf, "Bus frequency scaling is disabled\n");
}

static ssize_t bus_freq_scaling_enable_store(struct device *dev,
				 struct device_attribute *attr,
				 const char *buf, size_t size)
{
	if (strncmp(buf, "1", 1) == 0) {
		bus_freq_scaling_is_active = 1;
		set_high_bus_freq(0);
		/* Make sure system can enter low bus mode if it should be in
		low bus mode */
		if (low_freq_bus_used() && !low_bus_freq_mode)
			set_low_bus_freq();
	} else if (strncmp(buf, "0", 1) == 0) {
		if (bus_freq_scaling_is_active)
			set_high_bus_freq(1);
		bus_freq_scaling_is_active = 0;
	}
	return size;
}

static int busfreq_suspend(struct platform_device *pdev, pm_message_t message)
{
	return 0;
}

static int bus_freq_pm_notify(struct notifier_block *nb, unsigned long event,
	void *dummy)
{
	if (event == PM_SUSPEND_PREPARE) {
		set_high_bus_freq(1);
		busfreq_suspended = 1;
	} else if (event == PM_POST_SUSPEND) {
		busfreq_suspended = 0;
	}

	return NOTIFY_OK;
}
static int busfreq_resume(struct platform_device *pdev)
{
	return  0;
}
static struct notifier_block imx_bus_freq_pm_notifier = {
	.notifier_call = bus_freq_pm_notify,
};

static DEVICE_ATTR(enable, 0644, bus_freq_scaling_enable_show,
			bus_freq_scaling_enable_store);

/*!
 * This is the probe routine for the bus frequency driver.
 *
 * @param   pdev   The platform device structure
 *
 * @return         The function returns 0 on success
 *
 */
static int __devinit busfreq_probe(struct platform_device *pdev)
{
	u32 err;

	busfreq_dev = &pdev->dev;

	pll2_400 = clk_get(NULL, "pll2_pfd_400M");
	if (IS_ERR(pll2_400)) {
		printk(KERN_DEBUG "%s: failed to get pll2_pfd_400M\n",
		       __func__);
		return PTR_ERR(pll2_400);
	}

	pll2_200 = clk_get(NULL, "pll2_200M");
	if (IS_ERR(pll2_200)) {
		printk(KERN_DEBUG "%s: failed to get pll2_200M\n",
		       __func__);
		return PTR_ERR(pll2_200);
	}

	pll2 = clk_get(NULL, "pll2");
	if (IS_ERR(pll2)) {
		printk(KERN_DEBUG "%s: failed to get pll2\n",
		       __func__);
		return PTR_ERR(pll2);
	}

	cpu_clk = clk_get(NULL, "cpu_clk");
	if (IS_ERR(cpu_clk)) {
		printk(KERN_DEBUG "%s: failed to get cpu_clk\n",
		       __func__);
		return PTR_ERR(cpu_clk);
	}

	pll3 = clk_get(NULL, "pll3_main_clk");
	if (IS_ERR(pll3)) {
		printk(KERN_DEBUG "%s: failed to get pll3\n",
		       __func__);
		return PTR_ERR(pll3);
	}

	pll3_sw_clk = clk_get(NULL, "pll3_sw_clk");
	if (IS_ERR(pll3_sw_clk)) {
		printk(KERN_DEBUG "%s: failed to get pll3_sw_clk\n",
		       __func__);
		return PTR_ERR(pll3_sw_clk);
	}

	axi_clk = clk_get(NULL, "axi_clk");
	if (IS_ERR(axi_clk)) {
		printk(KERN_DEBUG "%s: failed to get axi_clk\n",
		       __func__);
		return PTR_ERR(axi_clk);
	}

	ahb_clk = clk_get(NULL, "ahb");
	if (IS_ERR(ahb_clk)) {
		printk(KERN_DEBUG "%s: failed to get ahb_clk\n",
		       __func__);
		return PTR_ERR(ahb_clk);
	}

	periph_clk = clk_get(NULL, "periph_clk");
	if (IS_ERR(periph_clk)) {
		printk(KERN_DEBUG "%s: failed to get periph_clk\n",
		       __func__);
		return PTR_ERR(periph_clk);
	}

	osc_clk = clk_get(NULL, "osc");
	if (IS_ERR(osc_clk)) {
		printk(KERN_DEBUG "%s: failed to get osc_clk\n",
		       __func__);
		return PTR_ERR(osc_clk);
	}

	mmdc_ch0_axi = clk_get(NULL, "mmdc_ch0_axi");
	if (IS_ERR(mmdc_ch0_axi)) {
		printk(KERN_DEBUG "%s: failed to get mmdc_ch0_axi\n",
		       __func__);
		return PTR_ERR(mmdc_ch0_axi);
	}

	vddsoc_cap_regulator = regulator_get(NULL, "cpu_vddsoc");
	if (IS_ERR(vddsoc_cap_regulator)) {
		printk(KERN_ERR "%s: failed to get vddsoc_cap regulator\n",
				__func__);
		return PTR_ERR(vddsoc_cap_regulator);
	}

	err = sysfs_create_file(&busfreq_dev->kobj, &dev_attr_enable.attr);
	if (err) {
		printk(KERN_ERR
		       "Unable to register sysdev entry for BUSFREQ");
		return err;
	}

	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
	low_bus_freq_mode = 0;
	if (cpu_is_mx6dl()) {
		high_bus_freq_mode = 0;
		med_bus_freq_mode = 1;
		/* To make pll2_400 use count right, as when
		system enter 24M, it will disable pll2_400 */
		clk_enable(pll2_400);
	} else {
		high_bus_freq_mode = 1;
		med_bus_freq_mode = 0;
	}
	bus_freq_scaling_is_active = 0;
	bus_freq_scaling_initialized = 1;

	if (cpu_is_mx6q()) {
		ddr_low_rate = LPAPM_CLK;
		ddr_med_rate = DDR_MED_CLK;
		ddr_normal_rate = DDR3_NORMAL_CLK;
	}
	if (cpu_is_mx6dl() || cpu_is_mx6sl()) {
		ddr_low_rate = LPAPM_CLK;
		ddr_normal_rate = ddr_med_rate = DDR_MED_CLK;
	}

	INIT_DELAYED_WORK(&low_bus_freq_handler, reduce_bus_freq_handler);
	register_pm_notifier(&imx_bus_freq_pm_notifier);

	if (!cpu_is_mx6sl())
		init_mmdc_settings();

	return 0;
}

static struct platform_driver busfreq_driver = {
	.driver = {
		   .name = "imx_busfreq",
		},
	.probe = busfreq_probe,
	.suspend = busfreq_suspend,
	.resume = busfreq_resume,
};

/*!
 * Initialise the busfreq_driver.
 *
 * @return  The function always returns 0.
 */

static int __init busfreq_init(void)
{
	if (platform_driver_register(&busfreq_driver) != 0) {
		printk(KERN_ERR "busfreq_driver register failed\n");
		return -ENODEV;
	}

	printk(KERN_INFO "Bus freq driver module loaded\n");

	/* Enable busfreq by default. */
	bus_freq_scaling_is_active = 1;

	if (cpu_is_mx6q())
		set_high_bus_freq(1);
	else
		set_high_bus_freq(0);

	/* Make sure system can enter low bus mode if it should be in
	low bus mode */
	if (low_freq_bus_used() && !low_bus_freq_mode)
		set_low_bus_freq();

	printk(KERN_INFO "Bus freq driver Enabled\n");
	return 0;
}

static void __exit busfreq_cleanup(void)
{
	sysfs_remove_file(&busfreq_dev->kobj, &dev_attr_enable.attr);

	/* Unregister the device structure */
	platform_driver_unregister(&busfreq_driver);
	bus_freq_scaling_initialized = 0;
}

late_initcall(busfreq_init);
module_exit(busfreq_cleanup);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("BusFreq driver");
MODULE_LICENSE("GPL");